From 8476d6cde2cd11a2cb87bd7392fc318eec25c8a0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 22 May 2017 00:09:52 +0200 Subject: backlight: adp8860: Move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Acked-by: Daniel Thompson Acked-by: Michael Hennerich Signed-off-by: Lee Jones --- arch/blackfin/mach-bf537/boards/stamp.c | 2 +- drivers/video/backlight/adp8860_bl.c | 2 +- include/linux/i2c/adp8860.h | 154 -------------------------------- include/linux/platform_data/adp8860.h | 154 ++++++++++++++++++++++++++++++++ 4 files changed, 156 insertions(+), 156 deletions(-) delete mode 100644 include/linux/i2c/adp8860.h create mode 100644 include/linux/platform_data/adp8860.h diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index eaec7b4832a2..76983dfba324 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -2047,7 +2047,7 @@ static struct adp8870_backlight_platform_data adp8870_pdata = { #endif #if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860) -#include +#include static struct led_info adp8860_leds[] = { { .name = "adp8860-led7", diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c index 510e559c060e..e7315bf14d60 100644 --- a/drivers/video/backlight/adp8860_bl.c +++ b/drivers/video/backlight/adp8860_bl.c @@ -18,7 +18,7 @@ #include #include -#include +#include #define ADP8860_EXT_FEATURES #define ADP8860_USE_LEDS diff --git a/include/linux/i2c/adp8860.h b/include/linux/i2c/adp8860.h deleted file mode 100644 index 0b4d39855c91..000000000000 --- a/include/linux/i2c/adp8860.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * Definitions and platform data for Analog Devices - * Backlight drivers ADP8860 - * - * Copyright 2009-2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __LINUX_I2C_ADP8860_H -#define __LINUX_I2C_ADP8860_H - -#include -#include - -#define ID_ADP8860 8860 - -#define ADP8860_MAX_BRIGHTNESS 0x7F -#define FLAG_OFFT_SHIFT 8 - -/* - * LEDs subdevice platform data - */ - -#define ADP8860_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT) -#define ADP8860_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT) -#define ADP8860_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT) -#define ADP8860_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT) - -#define ADP8860_LED_ONT_200ms 0 -#define ADP8860_LED_ONT_600ms 1 -#define ADP8860_LED_ONT_800ms 2 -#define ADP8860_LED_ONT_1200ms 3 - -#define ADP8860_LED_D7 (7) -#define ADP8860_LED_D6 (6) -#define ADP8860_LED_D5 (5) -#define ADP8860_LED_D4 (4) -#define ADP8860_LED_D3 (3) -#define ADP8860_LED_D2 (2) -#define ADP8860_LED_D1 (1) - -/* - * Backlight subdevice platform data - */ - -#define ADP8860_BL_D7 (1 << 6) -#define ADP8860_BL_D6 (1 << 5) -#define ADP8860_BL_D5 (1 << 4) -#define ADP8860_BL_D4 (1 << 3) -#define ADP8860_BL_D3 (1 << 2) -#define ADP8860_BL_D2 (1 << 1) -#define ADP8860_BL_D1 (1 << 0) - -#define ADP8860_FADE_T_DIS 0 /* Fade Timer Disabled */ -#define ADP8860_FADE_T_300ms 1 /* 0.3 Sec */ -#define ADP8860_FADE_T_600ms 2 -#define ADP8860_FADE_T_900ms 3 -#define ADP8860_FADE_T_1200ms 4 -#define ADP8860_FADE_T_1500ms 5 -#define ADP8860_FADE_T_1800ms 6 -#define ADP8860_FADE_T_2100ms 7 -#define ADP8860_FADE_T_2400ms 8 -#define ADP8860_FADE_T_2700ms 9 -#define ADP8860_FADE_T_3000ms 10 -#define ADP8860_FADE_T_3500ms 11 -#define ADP8860_FADE_T_4000ms 12 -#define ADP8860_FADE_T_4500ms 13 -#define ADP8860_FADE_T_5000ms 14 -#define ADP8860_FADE_T_5500ms 15 /* 5.5 Sec */ - -#define ADP8860_FADE_LAW_LINEAR 0 -#define ADP8860_FADE_LAW_SQUARE 1 -#define ADP8860_FADE_LAW_CUBIC1 2 -#define ADP8860_FADE_LAW_CUBIC2 3 - -#define ADP8860_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */ -#define ADP8860_BL_AMBL_FILT_160ms 1 -#define ADP8860_BL_AMBL_FILT_320ms 2 -#define ADP8860_BL_AMBL_FILT_640ms 3 -#define ADP8860_BL_AMBL_FILT_1280ms 4 -#define ADP8860_BL_AMBL_FILT_2560ms 5 -#define ADP8860_BL_AMBL_FILT_5120ms 6 -#define ADP8860_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */ - -/* - * Blacklight current 0..30mA - */ -#define ADP8860_BL_CUR_mA(I) ((I * 127) / 30) - -/* - * L2 comparator current 0..1106uA - */ -#define ADP8860_L2_COMP_CURR_uA(I) ((I * 255) / 1106) - -/* - * L3 comparator current 0..138uA - */ -#define ADP8860_L3_COMP_CURR_uA(I) ((I * 255) / 138) - -struct adp8860_backlight_platform_data { - u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */ - - u8 bl_fade_in; /* Backlight Fade-In Timer */ - u8 bl_fade_out; /* Backlight Fade-Out Timer */ - u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */ - - u8 en_ambl_sens; /* 1 = enable ambient light sensor */ - u8 abml_filt; /* Light sensor filter time */ - - u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l2_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l2_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l3_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ - u8 l3_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ - - u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ - u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ - u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ - u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ - - /** - * Independent Current Sinks / LEDS - * Sinks not assigned to the Backlight can be exposed to - * user space using the LEDS CLASS interface - */ - - int num_leds; - struct led_info *leds; - u8 led_fade_in; /* LED Fade-In Timer */ - u8 led_fade_out; /* LED Fade-Out Timer */ - u8 led_fade_law; /* fade-on/fade-off transfer characteristic */ - u8 led_on_time; - - /** - * Gain down disable. Setting this option does not allow the - * charge pump to switch to lower gains. NOT AVAILABLE on ADP8860 - * 1 = the charge pump doesn't switch down in gain until all LEDs are 0. - * The charge pump switches up in gain as needed. This feature is - * useful if the ADP8863 charge pump is used to drive an external load. - * This feature must be used when utilizing small fly capacitors - * (0402 or smaller). - * 0 = the charge pump automatically switches up and down in gain. - * This provides optimal efficiency, but is not suitable for driving - * loads that are not connected through the ADP8863 diode drivers. - * Additionally, the charge pump fly capacitors should be low ESR - * and sized 0603 or greater. - */ - - u8 gdwn_dis; -}; - -#endif /* __LINUX_I2C_ADP8860_H */ diff --git a/include/linux/platform_data/adp8860.h b/include/linux/platform_data/adp8860.h new file mode 100644 index 000000000000..0b4d39855c91 --- /dev/null +++ b/include/linux/platform_data/adp8860.h @@ -0,0 +1,154 @@ +/* + * Definitions and platform data for Analog Devices + * Backlight drivers ADP8860 + * + * Copyright 2009-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __LINUX_I2C_ADP8860_H +#define __LINUX_I2C_ADP8860_H + +#include +#include + +#define ID_ADP8860 8860 + +#define ADP8860_MAX_BRIGHTNESS 0x7F +#define FLAG_OFFT_SHIFT 8 + +/* + * LEDs subdevice platform data + */ + +#define ADP8860_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT) +#define ADP8860_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT) +#define ADP8860_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT) +#define ADP8860_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT) + +#define ADP8860_LED_ONT_200ms 0 +#define ADP8860_LED_ONT_600ms 1 +#define ADP8860_LED_ONT_800ms 2 +#define ADP8860_LED_ONT_1200ms 3 + +#define ADP8860_LED_D7 (7) +#define ADP8860_LED_D6 (6) +#define ADP8860_LED_D5 (5) +#define ADP8860_LED_D4 (4) +#define ADP8860_LED_D3 (3) +#define ADP8860_LED_D2 (2) +#define ADP8860_LED_D1 (1) + +/* + * Backlight subdevice platform data + */ + +#define ADP8860_BL_D7 (1 << 6) +#define ADP8860_BL_D6 (1 << 5) +#define ADP8860_BL_D5 (1 << 4) +#define ADP8860_BL_D4 (1 << 3) +#define ADP8860_BL_D3 (1 << 2) +#define ADP8860_BL_D2 (1 << 1) +#define ADP8860_BL_D1 (1 << 0) + +#define ADP8860_FADE_T_DIS 0 /* Fade Timer Disabled */ +#define ADP8860_FADE_T_300ms 1 /* 0.3 Sec */ +#define ADP8860_FADE_T_600ms 2 +#define ADP8860_FADE_T_900ms 3 +#define ADP8860_FADE_T_1200ms 4 +#define ADP8860_FADE_T_1500ms 5 +#define ADP8860_FADE_T_1800ms 6 +#define ADP8860_FADE_T_2100ms 7 +#define ADP8860_FADE_T_2400ms 8 +#define ADP8860_FADE_T_2700ms 9 +#define ADP8860_FADE_T_3000ms 10 +#define ADP8860_FADE_T_3500ms 11 +#define ADP8860_FADE_T_4000ms 12 +#define ADP8860_FADE_T_4500ms 13 +#define ADP8860_FADE_T_5000ms 14 +#define ADP8860_FADE_T_5500ms 15 /* 5.5 Sec */ + +#define ADP8860_FADE_LAW_LINEAR 0 +#define ADP8860_FADE_LAW_SQUARE 1 +#define ADP8860_FADE_LAW_CUBIC1 2 +#define ADP8860_FADE_LAW_CUBIC2 3 + +#define ADP8860_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */ +#define ADP8860_BL_AMBL_FILT_160ms 1 +#define ADP8860_BL_AMBL_FILT_320ms 2 +#define ADP8860_BL_AMBL_FILT_640ms 3 +#define ADP8860_BL_AMBL_FILT_1280ms 4 +#define ADP8860_BL_AMBL_FILT_2560ms 5 +#define ADP8860_BL_AMBL_FILT_5120ms 6 +#define ADP8860_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */ + +/* + * Blacklight current 0..30mA + */ +#define ADP8860_BL_CUR_mA(I) ((I * 127) / 30) + +/* + * L2 comparator current 0..1106uA + */ +#define ADP8860_L2_COMP_CURR_uA(I) ((I * 255) / 1106) + +/* + * L3 comparator current 0..138uA + */ +#define ADP8860_L3_COMP_CURR_uA(I) ((I * 255) / 138) + +struct adp8860_backlight_platform_data { + u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */ + + u8 bl_fade_in; /* Backlight Fade-In Timer */ + u8 bl_fade_out; /* Backlight Fade-Out Timer */ + u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */ + + u8 en_ambl_sens; /* 1 = enable ambient light sensor */ + u8 abml_filt; /* Light sensor filter time */ + + u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l2_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l2_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l3_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + u8 l3_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + + u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + + /** + * Independent Current Sinks / LEDS + * Sinks not assigned to the Backlight can be exposed to + * user space using the LEDS CLASS interface + */ + + int num_leds; + struct led_info *leds; + u8 led_fade_in; /* LED Fade-In Timer */ + u8 led_fade_out; /* LED Fade-Out Timer */ + u8 led_fade_law; /* fade-on/fade-off transfer characteristic */ + u8 led_on_time; + + /** + * Gain down disable. Setting this option does not allow the + * charge pump to switch to lower gains. NOT AVAILABLE on ADP8860 + * 1 = the charge pump doesn't switch down in gain until all LEDs are 0. + * The charge pump switches up in gain as needed. This feature is + * useful if the ADP8863 charge pump is used to drive an external load. + * This feature must be used when utilizing small fly capacitors + * (0402 or smaller). + * 0 = the charge pump automatically switches up and down in gain. + * This provides optimal efficiency, but is not suitable for driving + * loads that are not connected through the ADP8863 diode drivers. + * Additionally, the charge pump fly capacitors should be low ESR + * and sized 0603 or greater. + */ + + u8 gdwn_dis; +}; + +#endif /* __LINUX_I2C_ADP8860_H */ -- cgit v1.2.3