From bbc1f57aa87066a188ef34330bc1f091b95b1a6b Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 24 Sep 2018 00:04:08 +0100 Subject: USB: serial: cypress_m8: fix spelling mistake "retreiving" -> "retrieving" Trivial fix to spelling mistake in dev_dbg message Signed-off-by: Colin Ian King Signed-off-by: Johan Hovold --- drivers/usb/serial/cypress_m8.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index e0035c023120..31c6091be46a 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -378,7 +378,7 @@ static int cypress_serial_control(struct tty_struct *tty, retval = -ENOTTY; goto out; } - dev_dbg(dev, "%s - retreiving serial line settings\n", __func__); + dev_dbg(dev, "%s - retrieving serial line settings\n", __func__); do { retval = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), -- cgit v1.2.3 From ba93cc7da8965bd513a7393db0f030e51bff4b60 Mon Sep 17 00:00:00 2001 From: Karoly Pados Date: Tue, 25 Sep 2018 15:59:11 +0200 Subject: USB: serial: ftdi_sio: implement GPIO support for FT-X devices This patch allows using the CBUS pins of FT-X devices as GPIO in CBUS bitbanging mode. There is no conflict between the GPIO and VCP functionality in this mode. Tested on FT230X and FT231X. As there is no way to request the current CBUS register configuration from the device, all CBUS pins are set to a known state when the first GPIO is requested. This allows using libftdi to set the GPIO pins before loading this module for UART functionality, a behavior that existing applications might be relying upon (though no specific case is known to the authors of this patch). Signed-off-by: Karoly Pados [ johan: minor style changes ] Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 360 +++++++++++++++++++++++++++++++++++++++++- drivers/usb/serial/ftdi_sio.h | 27 +++- 2 files changed, 385 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index b5cef322826f..6b727ada20cf 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include "ftdi_sio.h" #include "ftdi_sio_ids.h" @@ -72,6 +73,15 @@ struct ftdi_private { unsigned int latency; /* latency setting in use */ unsigned short max_packet_size; struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */ +#ifdef CONFIG_GPIOLIB + struct gpio_chip gc; + struct mutex gpio_lock; /* protects GPIO state */ + bool gpio_registered; /* is the gpiochip in kernel registered */ + bool gpio_used; /* true if the user requested a gpio */ + u8 gpio_altfunc; /* which pins are in gpio mode */ + u8 gpio_output; /* pin directions cache */ + u8 gpio_value; /* pin value for outputs */ +#endif }; /* struct ftdi_sio_quirk is used by devices requiring special attention. */ @@ -1766,6 +1776,344 @@ static void remove_sysfs_attrs(struct usb_serial_port *port) } +#ifdef CONFIG_GPIOLIB + +static const char * const ftdi_ftx_gpio_names[] = { + "CBUS0", "CBUS1", "CBUS2", "CBUS3" +}; + +static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + int result; + u16 val; + + val = (mode << 8) | (priv->gpio_output << 4) | priv->gpio_value; + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + FTDI_SIO_SET_BITMODE_REQUEST, + FTDI_SIO_SET_BITMODE_REQUEST_TYPE, val, + priv->interface, NULL, 0, WDR_TIMEOUT); + if (result < 0) { + dev_err(&serial->interface->dev, + "bitmode request failed for value 0x%04x: %d\n", + val, result); + } + + return result; +} + +static int ftdi_set_cbus_pins(struct usb_serial_port *port) +{ + return ftdi_set_bitmode(port, FTDI_SIO_BITMODE_CBUS); +} + +static int ftdi_exit_cbus_mode(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + + priv->gpio_output = 0; + priv->gpio_value = 0; + return ftdi_set_bitmode(port, FTDI_SIO_BITMODE_RESET); +} + +static int ftdi_gpio_request(struct gpio_chip *gc, unsigned int offset) +{ + struct usb_serial_port *port = gpiochip_get_data(gc); + struct ftdi_private *priv = usb_get_serial_port_data(port); + int result; + + if (priv->gpio_altfunc & BIT(offset)) + return -ENODEV; + + mutex_lock(&priv->gpio_lock); + if (!priv->gpio_used) { + /* Set default pin states, as we cannot get them from device */ + priv->gpio_output = 0x00; + priv->gpio_value = 0x00; + result = ftdi_set_cbus_pins(port); + if (result) { + mutex_unlock(&priv->gpio_lock); + return result; + } + + priv->gpio_used = true; + } + mutex_unlock(&priv->gpio_lock); + + return 0; +} + +static int ftdi_read_cbus_pins(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + unsigned char *buf; + int result; + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + result = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + FTDI_SIO_READ_PINS_REQUEST, + FTDI_SIO_READ_PINS_REQUEST_TYPE, 0, + priv->interface, buf, 1, WDR_TIMEOUT); + if (result < 1) { + if (result >= 0) + result = -EIO; + } else { + result = buf[0]; + } + + kfree(buf); + + return result; +} + +static int ftdi_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct usb_serial_port *port = gpiochip_get_data(gc); + int result; + + result = ftdi_read_cbus_pins(port); + if (result < 0) + return result; + + return !!(result & BIT(gpio)); +} + +static void ftdi_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct usb_serial_port *port = gpiochip_get_data(gc); + struct ftdi_private *priv = usb_get_serial_port_data(port); + + mutex_lock(&priv->gpio_lock); + + if (value) + priv->gpio_value |= BIT(gpio); + else + priv->gpio_value &= ~BIT(gpio); + + ftdi_set_cbus_pins(port); + + mutex_unlock(&priv->gpio_lock); +} + +static int ftdi_gpio_get_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + struct usb_serial_port *port = gpiochip_get_data(gc); + int result; + + result = ftdi_read_cbus_pins(port); + if (result < 0) + return result; + + *bits = result & *mask; + + return 0; +} + +static void ftdi_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + struct usb_serial_port *port = gpiochip_get_data(gc); + struct ftdi_private *priv = usb_get_serial_port_data(port); + + mutex_lock(&priv->gpio_lock); + + priv->gpio_value &= ~(*mask); + priv->gpio_value |= *bits & *mask; + ftdi_set_cbus_pins(port); + + mutex_unlock(&priv->gpio_lock); +} + +static int ftdi_gpio_direction_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct usb_serial_port *port = gpiochip_get_data(gc); + struct ftdi_private *priv = usb_get_serial_port_data(port); + + return !(priv->gpio_output & BIT(gpio)); +} + +static int ftdi_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio) +{ + struct usb_serial_port *port = gpiochip_get_data(gc); + struct ftdi_private *priv = usb_get_serial_port_data(port); + int result; + + mutex_lock(&priv->gpio_lock); + + priv->gpio_output &= ~BIT(gpio); + result = ftdi_set_cbus_pins(port); + + mutex_unlock(&priv->gpio_lock); + + return result; +} + +static int ftdi_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio, + int value) +{ + struct usb_serial_port *port = gpiochip_get_data(gc); + struct ftdi_private *priv = usb_get_serial_port_data(port); + int result; + + mutex_lock(&priv->gpio_lock); + + priv->gpio_output |= BIT(gpio); + if (value) + priv->gpio_value |= BIT(gpio); + else + priv->gpio_value &= ~BIT(gpio); + + result = ftdi_set_cbus_pins(port); + + mutex_unlock(&priv->gpio_lock); + + return result; +} + +static int ftdi_read_eeprom(struct usb_serial *serial, void *dst, u16 addr, + u16 nbytes) +{ + int read = 0; + + if (addr % 2 != 0) + return -EINVAL; + if (nbytes % 2 != 0) + return -EINVAL; + + /* Read EEPROM two bytes at a time */ + while (read < nbytes) { + int rv; + + rv = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + FTDI_SIO_READ_EEPROM_REQUEST, + FTDI_SIO_READ_EEPROM_REQUEST_TYPE, + 0, (addr + read) / 2, dst + read, 2, + WDR_TIMEOUT); + if (rv < 2) { + if (rv >= 0) + return -EIO; + else + return rv; + } + + read += rv; + } + + return 0; +} + +static int ftx_gpioconf_init(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + const u16 cbus_cfg_addr = 0x1a; + const u16 cbus_cfg_size = 4; + u8 *cbus_cfg_buf; + int result; + u8 i; + + cbus_cfg_buf = kmalloc(cbus_cfg_size, GFP_KERNEL); + if (!cbus_cfg_buf) + return -ENOMEM; + + result = ftdi_read_eeprom(serial, cbus_cfg_buf, + cbus_cfg_addr, cbus_cfg_size); + if (result < 0) + goto out_free; + + /* FIXME: FT234XD alone has 1 GPIO, but how to recognize this IC? */ + priv->gc.ngpio = 4; + priv->gc.names = ftdi_ftx_gpio_names; + + /* Determine which pins are configured for CBUS bitbanging */ + priv->gpio_altfunc = 0xff; + for (i = 0; i < priv->gc.ngpio; ++i) { + if (cbus_cfg_buf[i] == FTDI_FTX_CBUS_MUX_GPIO) + priv->gpio_altfunc &= ~BIT(i); + } + +out_free: + kfree(cbus_cfg_buf); + + return result; +} + +static int ftdi_gpio_init(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + int result; + + switch (priv->chip_type) { + case FTX: + result = ftx_gpioconf_init(port); + break; + default: + return 0; + } + + if (result < 0) + return result; + + mutex_init(&priv->gpio_lock); + + priv->gc.label = "ftdi-cbus"; + priv->gc.request = ftdi_gpio_request; + priv->gc.get_direction = ftdi_gpio_direction_get; + priv->gc.direction_input = ftdi_gpio_direction_input; + priv->gc.direction_output = ftdi_gpio_direction_output; + priv->gc.get = ftdi_gpio_get; + priv->gc.set = ftdi_gpio_set; + priv->gc.get_multiple = ftdi_gpio_get_multiple; + priv->gc.set_multiple = ftdi_gpio_set_multiple; + priv->gc.owner = THIS_MODULE; + priv->gc.parent = &serial->interface->dev; + priv->gc.base = -1; + priv->gc.can_sleep = true; + + result = gpiochip_add_data(&priv->gc, port); + if (!result) + priv->gpio_registered = true; + + return result; +} + +static void ftdi_gpio_remove(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + + if (priv->gpio_registered) { + gpiochip_remove(&priv->gc); + priv->gpio_registered = false; + } + + if (priv->gpio_used) { + /* Exiting CBUS-mode does not reset pin states. */ + ftdi_exit_cbus_mode(port); + priv->gpio_used = false; + } +} + +#else + +static int ftdi_gpio_init(struct usb_serial_port *port) +{ + return 0; +} + +static void ftdi_gpio_remove(struct usb_serial_port *port) { } + +#endif /* CONFIG_GPIOLIB */ + /* * *************************************************************************** * FTDI driver specific functions @@ -1794,7 +2142,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) { struct ftdi_private *priv; const struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial); - + int result; priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); if (!priv) @@ -1813,6 +2161,14 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) priv->latency = 16; write_latency_timer(port); create_sysfs_attrs(port); + + result = ftdi_gpio_init(port); + if (result < 0) { + dev_err(&port->serial->interface->dev, + "GPIO initialisation failed: %d\n", + result); + } + return 0; } @@ -1930,6 +2286,8 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); + ftdi_gpio_remove(port); + remove_sysfs_attrs(port); kfree(priv); diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index dcd0b6e05baf..6cfe682f8348 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -35,7 +35,10 @@ #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ -#define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ +#define FTDI_SIO_GET_LATENCY_TIMER 0x0a /* Get the latency timer */ +#define FTDI_SIO_SET_BITMODE 0x0b /* Set bitbang mode */ +#define FTDI_SIO_READ_PINS 0x0c /* Read immediate value of pins */ +#define FTDI_SIO_READ_EEPROM 0x90 /* Read EEPROM */ /* Interface indices for FT2232, FT2232H and FT4232H devices */ #define INTERFACE_A 1 @@ -433,6 +436,28 @@ enum ftdi_sio_baudrate { * 1 = active */ +/* FTDI_SIO_SET_BITMODE */ +#define FTDI_SIO_SET_BITMODE_REQUEST_TYPE 0x40 +#define FTDI_SIO_SET_BITMODE_REQUEST FTDI_SIO_SET_BITMODE + +/* Possible bitmodes for FTDI_SIO_SET_BITMODE_REQUEST */ +#define FTDI_SIO_BITMODE_RESET 0x00 +#define FTDI_SIO_BITMODE_CBUS 0x20 + +/* FTDI_SIO_READ_PINS */ +#define FTDI_SIO_READ_PINS_REQUEST_TYPE 0xc0 +#define FTDI_SIO_READ_PINS_REQUEST FTDI_SIO_READ_PINS + +/* + * FTDI_SIO_READ_EEPROM + * + * EEPROM format found in FTDI AN_201, "FT-X MTP memory Configuration", + * http://www.ftdichip.com/Support/Documents/AppNotes/AN_201_FT-X%20MTP%20Memory%20Configuration.pdf + */ +#define FTDI_SIO_READ_EEPROM_REQUEST_TYPE 0xc0 +#define FTDI_SIO_READ_EEPROM_REQUEST FTDI_SIO_READ_EEPROM + +#define FTDI_FTX_CBUS_MUX_GPIO 8 /* Descriptors returned by the device -- cgit v1.2.3 From e0658e3074231d68f6546be1c5916ba2f4dc1295 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 30 Sep 2018 14:27:02 +0200 Subject: USB: serial: ftdi_sio: fix gpio name collisions Drop the gpio line names, which cause gpiolib to complain loudly whenever a second ftdi gpiochip is registered: gpio gpiochip5: Detected name collision for GPIO name 'CBUS0' gpio gpiochip5: Detected name collision for GPIO name 'CBUS1' gpio gpiochip5: Detected name collision for GPIO name 'CBUS2' gpio gpiochip5: Detected name collision for GPIO name 'CBUS3' and also prevents the legacy sysfs interface from being used (as the line names are used as device names whenever they are set): sysfs: cannot create duplicate filename '/class/gpio/CBUS0' Until non-unique names are supported by gpiolib (without warnings and stack dumps), let's leave the gpio lines unnamed. Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 6b727ada20cf..be50b2a200aa 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1778,10 +1778,6 @@ static void remove_sysfs_attrs(struct usb_serial_port *port) #ifdef CONFIG_GPIOLIB -static const char * const ftdi_ftx_gpio_names[] = { - "CBUS0", "CBUS1", "CBUS2", "CBUS3" -}; - static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode) { struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -2032,7 +2028,6 @@ static int ftx_gpioconf_init(struct usb_serial_port *port) /* FIXME: FT234XD alone has 1 GPIO, but how to recognize this IC? */ priv->gc.ngpio = 4; - priv->gc.names = ftdi_ftx_gpio_names; /* Determine which pins are configured for CBUS bitbanging */ priv->gpio_altfunc = 0xff; -- cgit v1.2.3 From ff32d97e39e7053fdc1d316bd2e2eff70b77fdd2 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 30 Sep 2018 14:27:03 +0200 Subject: USB: serial: ftdi_sio: add support for FT232R CBUS gpios Enable support for cbus gpios on FT232R. The cbus configuration is stored in one word in the EEPROM at offset 0x0a (byte-offset 0x14) with the mux config for CBUS0, CBUS1, CBUS2 and CBUS3 in bits 0..3, 4..7, 8..11 and 12..15, respectively. Tested using FT232RL by configuring one cbus pin at a time. Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 40 ++++++++++++++++++++++++++++++++++++++-- drivers/usb/serial/ftdi_sio.h | 3 ++- 2 files changed, 40 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index be50b2a200aa..f1eb20acb3bb 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2007,7 +2007,40 @@ static int ftdi_read_eeprom(struct usb_serial *serial, void *dst, u16 addr, return 0; } -static int ftx_gpioconf_init(struct usb_serial_port *port) +static int ftdi_gpio_init_ft232r(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + u16 cbus_config; + u8 *buf; + int ret; + int i; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = ftdi_read_eeprom(port->serial, buf, 0x14, 2); + if (ret < 0) + goto out_free; + + cbus_config = le16_to_cpup((__le16 *)buf); + dev_dbg(&port->dev, "cbus_config = 0x%04x\n", cbus_config); + + priv->gc.ngpio = 4; + + priv->gpio_altfunc = 0xff; + for (i = 0; i < priv->gc.ngpio; ++i) { + if ((cbus_config & 0xf) == FTDI_FT232R_CBUS_MUX_GPIO) + priv->gpio_altfunc &= ~BIT(i); + cbus_config >>= 4; + } +out_free: + kfree(buf); + + return ret; +} + +static int ftdi_gpio_init_ftx(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; @@ -2049,8 +2082,11 @@ static int ftdi_gpio_init(struct usb_serial_port *port) int result; switch (priv->chip_type) { + case FT232RL: + result = ftdi_gpio_init_ft232r(port); + break; case FTX: - result = ftx_gpioconf_init(port); + result = ftdi_gpio_init_ftx(port); break; default: return 0; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 6cfe682f8348..a79a1325b4d9 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -457,7 +457,8 @@ enum ftdi_sio_baudrate { #define FTDI_SIO_READ_EEPROM_REQUEST_TYPE 0xc0 #define FTDI_SIO_READ_EEPROM_REQUEST FTDI_SIO_READ_EEPROM -#define FTDI_FTX_CBUS_MUX_GPIO 8 +#define FTDI_FTX_CBUS_MUX_GPIO 0x8 +#define FTDI_FT232R_CBUS_MUX_GPIO 0xa /* Descriptors returned by the device -- cgit v1.2.3 From 56445eef55cb5904096fed7a73cf87b755dfffc7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 30 Sep 2018 18:03:11 +0200 Subject: USB: serial: cypress_m8: fix interrupt-out transfer length Fix interrupt-out transfer length which was being set to the transfer-buffer length rather than the size of the outgoing packet. Note that no slab data was leaked as the whole transfer buffer is always cleared before each transfer. Fixes: 9aa8dae7b1fa ("cypress_m8: use usb_fill_int_urb where appropriate") Signed-off-by: Johan Hovold --- drivers/usb/serial/cypress_m8.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 31c6091be46a..5aaab8f4dd8f 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -769,7 +769,7 @@ send: usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev, usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress), - port->interrupt_out_buffer, port->interrupt_out_size, + port->interrupt_out_buffer, actual_size, cypress_write_int_callback, port, priv->write_urb_interval); result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC); if (result) { -- cgit v1.2.3 From 17c42e34997ae172c794f84fefe47f00bec13f9a Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Thu, 4 Oct 2018 07:09:53 +0000 Subject: USB: serial: cypress_m8: remove set but not used variable 'iflag' Fixes gcc '-Wunused-but-set-variable' warning: drivers/usb/serial/cypress_m8.c: In function 'cypress_set_termios': drivers/usb/serial/cypress_m8.c:866:18: warning: variable 'iflag' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing Signed-off-by: Johan Hovold --- drivers/usb/serial/cypress_m8.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 5aaab8f4dd8f..ed51bc48eea6 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -863,7 +863,7 @@ static void cypress_set_termios(struct tty_struct *tty, struct cypress_private *priv = usb_get_serial_port_data(port); struct device *dev = &port->dev; int data_bits, stop_bits, parity_type, parity_enable; - unsigned cflag, iflag; + unsigned int cflag; unsigned long flags; __u8 oldlines; int linechange = 0; @@ -899,7 +899,6 @@ static void cypress_set_termios(struct tty_struct *tty, tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS); cflag = tty->termios.c_cflag; - iflag = tty->termios.c_iflag; /* check if there are new settings */ if (old_termios) { -- cgit v1.2.3