From 0b9a29add43273e64ef45472e08d38116fee1d82 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sun, 24 Apr 2016 14:30:16 -0700 Subject: arm: Use _rcuidle tracepoint to allow use from idle Testing on ARM encountered the following pair of lockdep-RCU splats: ------------------------------------------------------------------------ =============================== [ INFO: suspicious RCU usage. ] 4.6.0-rc4-next-20160422 #1 Not tainted ------------------------------- include/trace/events/power.h:328 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! no locks held by swapper/0/0. stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc4-next-20160422 #1 Hardware name: Generic OMAP3-GP (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0xa8/0xe0) [] (dump_stack) from [] (pwrdm_set_next_pwrst+0xf8/0x1cc) [] (pwrdm_set_next_pwrst) from [] (omap3_enter_idle_bm+0x1b8/0x1e8) [] (omap3_enter_idle_bm) from [] (cpuidle_enter_state+0x84/0x408) [] (cpuidle_enter_state) from [] (cpu_startup_entry+0x1c8/0x3f0) [] (cpu_startup_entry) from [] (start_kernel+0x354/0x3cc) ------------------------------------------------------------------------ [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0xa8/0xe0) [] (dump_stack) from [] (_pwrdm_state_switch+0x188/0x32c) [] (_pwrdm_state_switch) from [] (_pwrdm_post_transition_cb+0xc/0x14) [] (_pwrdm_post_transition_cb) from [] (pwrdm_for_each+0x30/0x5c) [] (pwrdm_for_each) from [] (pwrdm_post_transition+0x24/0x30) [] (pwrdm_post_transition) from [] (omap_sram_idle+0xfc/0x240) [] (omap_sram_idle) from [] (omap3_enter_idle_bm+0xf0/0x1e8) [] (omap3_enter_idle_bm) from [] (cpuidle_enter_state+0x84/0x408) [] (cpuidle_enter_state) from [] (cpu_startup_entry+0x1c8/0x3f0) [] (cpu_startup_entry) from [] (start_kernel+0x354/0x3cc) ------------------------------------------------------------------------ These are caused by event tracing from the idle loop, and they were exposed by commit 293e2421fe25 ("rcu: Remove superfluous versions of rcu_read_lock_sched_held()"), which suppressed some false negatives. The current commit therefore adds the _rcuidle suffix to make RCU aware of this implicit use of RCU by event tracing, thus preventing both splats. Reported-by: Guenter Roeck Signed-off-by: Paul E. McKenney Tested-by: Guenter Roeck Tested-by: Tony Lindgren Cc: Russell King Reviewed-by: Steven Rostedt Cc: Cc: --- arch/arm/mach-omap2/powerdomain.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 78af6d8cf2e2..daf2753de7aa 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -186,8 +186,9 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag) trace_state = (PWRDM_TRACE_STATES_FLAG | ((next & OMAP_POWERSTATE_MASK) << 8) | ((prev & OMAP_POWERSTATE_MASK) << 0)); - trace_power_domain_target(pwrdm->name, trace_state, - smp_processor_id()); + trace_power_domain_target_rcuidle(pwrdm->name, + trace_state, + smp_processor_id()); } break; default: @@ -523,8 +524,8 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) { /* Trace the pwrdm desired target state */ - trace_power_domain_target(pwrdm->name, pwrst, - smp_processor_id()); + trace_power_domain_target_rcuidle(pwrdm->name, pwrst, + smp_processor_id()); /* Program the pwrdm desired target state */ ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst); } -- cgit v1.2.3 From 5ec97ba0713d118a1cd03ccc7677a13769253bbd Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Fri, 29 Apr 2016 14:42:33 +0300 Subject: iio: bmi160: Fix output data rate for accel Format is INT_PLUS_MICRO and micro odr part of ODR should be parts of a micro. Also s/8000/800 this is obviously a typo. Fixes: 77c4ad2d6a9 ("iio: imu: Add initial support for Bosch BMI160") Signed-off-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- drivers/iio/imu/bmi160/bmi160_core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c index 0bf92b06d7d8..cd9b75eeccd7 100644 --- a/drivers/iio/imu/bmi160/bmi160_core.c +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -209,11 +209,11 @@ static const struct bmi160_scale_item bmi160_scale_table[] = { }; static const struct bmi160_odr bmi160_accel_odr[] = { - {0x01, 0, 78125}, - {0x02, 1, 5625}, - {0x03, 3, 125}, - {0x04, 6, 25}, - {0x05, 12, 5}, + {0x01, 0, 781250}, + {0x02, 1, 562500}, + {0x03, 3, 125000}, + {0x04, 6, 250000}, + {0x05, 12, 500000}, {0x06, 25, 0}, {0x07, 50, 0}, {0x08, 100, 0}, @@ -229,7 +229,7 @@ static const struct bmi160_odr bmi160_gyro_odr[] = { {0x08, 100, 0}, {0x09, 200, 0}, {0x0A, 400, 0}, - {0x0B, 8000, 0}, + {0x0B, 800, 0}, {0x0C, 1600, 0}, {0x0D, 3200, 0}, }; -- cgit v1.2.3 From c25d3f37be016b301f446a5257645c4845daf53c Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Fri, 29 Apr 2016 14:42:34 +0300 Subject: iio: bmi160: Fix ODR setting mask and val parameters of regmap_update_bits were reveresed. Fixes: 77c4ad2d6a9 ("iio: imu: Add initial support for Bosch BMI160") Signed-off-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- drivers/iio/imu/bmi160/bmi160_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c index cd9b75eeccd7..b8a290ec984e 100644 --- a/drivers/iio/imu/bmi160/bmi160_core.c +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -364,8 +364,8 @@ int bmi160_set_odr(struct bmi160_data *data, enum bmi160_sensor_type t, return regmap_update_bits(data->regmap, bmi160_regs[t].config, - bmi160_odr_table[t].tbl[i].bits, - bmi160_regs[t].config_odr_mask); + bmi160_regs[t].config_odr_mask, + bmi160_odr_table[t].tbl[i].bits); } static int bmi160_get_odr(struct bmi160_data *data, enum bmi160_sensor_type t, -- cgit v1.2.3 From 04bf02175fe9577875fb8285cc2d08169fef613a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 29 Apr 2016 12:03:31 +0300 Subject: iio: dac: ad5592r: Off by one bug in ad5592r_alloc_channels() The > here should be >= or we go beyond the end for the array. Signed-off-by: Dan Carpenter Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5592r-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c index 948f600e7059..69bde5909854 100644 --- a/drivers/iio/dac/ad5592r-base.c +++ b/drivers/iio/dac/ad5592r-base.c @@ -525,7 +525,7 @@ static int ad5592r_alloc_channels(struct ad5592r_state *st) device_for_each_child_node(st->dev, child) { ret = fwnode_property_read_u32(child, "reg", ®); - if (ret || reg > ARRAY_SIZE(st->channel_modes)) + if (ret || reg >= ARRAY_SIZE(st->channel_modes)) continue; ret = fwnode_property_read_u32(child, "adi,mode", &tmp); -- cgit v1.2.3 From 53dfc3b9e6c54d077f578f9016b6c8ab5f891e10 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 28 Apr 2016 14:02:41 +0200 Subject: iio: light: bh1780: return after write When writing a value using direct reg access from debugfs we need to return and not fall through to reading the value, lest we'll dereference a NULL pointer. Cc: Dan Carpenter Reported-by: Dan Carpenter Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/light/bh1780.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/light/bh1780.c b/drivers/iio/light/bh1780.c index 72b364e4aa72..f83595334ff1 100644 --- a/drivers/iio/light/bh1780.c +++ b/drivers/iio/light/bh1780.c @@ -84,7 +84,7 @@ static int bh1780_debugfs_reg_access(struct iio_dev *indio_dev, int ret; if (!readval) - bh1780_write(bh1780, (u8)reg, (u8)writeval); + return bh1780_write(bh1780, (u8)reg, (u8)writeval); ret = bh1780_read(bh1780, (u8)reg); if (ret < 0) -- cgit v1.2.3 From 6b4e941875ca464e0bf737d7cdc9b72b008df6eb Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 5 May 2016 15:33:37 -0700 Subject: ARM: dts: omap5-board-common: Describe the voltage supply mapping accurately MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit OMAP5uEVM based platforms share a similar voltage rail map. This should be properly described in device tree, without this regulator core will be unable to determine the source voltage of LDOs such as LDO9 and SMPS10 which could be configured for bypass depending on the voltage requested of them. This results in conditions such as: ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator Cc: Agustí Fontquerni Cc: Eduard Gavin Cc: Enric Balletbo i Serra Cc: Peter Ujfalusi Signed-off-by: Nishanth Menon [tony@atomide.com: fixed to use palmas style in-supply] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-board-common.dtsi | 43 +++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index d0990606d16e..ebbaa140355b 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -14,6 +14,29 @@ display0 = &hdmi0; }; + vmain: fixedregulator-vmain { + compatible = "regulator-fixed"; + regulator-name = "vmain"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vsys_cobra: fixedregulator-vsys_cobra { + compatible = "regulator-fixed"; + regulator-name = "vsys_cobra"; + vin-supply = <&vmain>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdds_1v8_main: fixedregulator-vdds_1v8_main { + compatible = "regulator-fixed"; + regulator-name = "vdds_1v8_main"; + vin-supply = <&smps7_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vmmcsd_fixed: fixedregulator-mmcsd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -409,6 +432,26 @@ ti,ldo6-vibrator; + smps123-in-supply = <&vsys_cobra>; + smps45-in-supply = <&vsys_cobra>; + smps6-in-supply = <&vsys_cobra>; + smps7-in-supply = <&vsys_cobra>; + smps8-in-supply = <&vsys_cobra>; + smps9-in-supply = <&vsys_cobra>; + smps10_out2-in-supply = <&vsys_cobra>; + smps10_out1-in-supply = <&vsys_cobra>; + ldo1-in-supply = <&vsys_cobra>; + ldo2-in-supply = <&vsys_cobra>; + ldo3-in-supply = <&vdds_1v8_main>; + ldo4-in-supply = <&vdds_1v8_main>; + ldo5-in-supply = <&vsys_cobra>; + ldo6-in-supply = <&vdds_1v8_main>; + ldo7-in-supply = <&vsys_cobra>; + ldo8-in-supply = <&vsys_cobra>; + ldo9-in-supply = <&vmmcsd_fixed>; + ldoln-in-supply = <&vsys_cobra>; + ldousb-in-supply = <&vsys_cobra>; + regulators { smps123_reg: smps123 { /* VDD_OPP_MPU */ -- cgit v1.2.3 From a7f1884554b81bd68cd435d72f09a3527629ac43 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 12 May 2016 14:43:54 +0200 Subject: netfilter: nfnetlink_queue: fix timestamp attribute Since 4.4 we erronously use timestamp of the netlink skb (which is zero). Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1066 Fixes: b28b1e826f818c30ea7 ("netfilter: nfnetlink_queue: use y2038 safe timestamp") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nfnetlink_queue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c index cb5b630a645b..e34256a0e7e9 100644 --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -499,7 +499,7 @@ nfqnl_build_packet_message(struct net *net, struct nfqnl_instance *queue, if (entskb->tstamp.tv64) { struct nfqnl_msg_packet_timestamp ts; - struct timespec64 kts = ktime_to_timespec64(skb->tstamp); + struct timespec64 kts = ktime_to_timespec64(entskb->tstamp); ts.sec = cpu_to_be64(kts.tv_sec); ts.usec = cpu_to_be64(kts.tv_nsec / NSEC_PER_USEC); -- cgit v1.2.3 From c0053bd50af57c4ebf032a9de1b07ca78c982452 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 6 Aug 2015 10:54:24 -0500 Subject: ARM: OMAP5 / DRA7: Introduce workaround for 801819 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add workaround for Cortex-A15 ARM erratum 801819 which says in summary that "A livelock can occur in the L2 cache arbitration that might prevent a snoop from completing. Under certain conditions this can cause the system to deadlock. " Recommended workaround is as follows: Do both of the following: 1) Do not use the write-back no-allocate memory type. 2) Do not issue write-back cacheable stores at any time when the cache is disabled (SCTLR.C=0) and the MMU is enabled (SCTLR.M=1). Because it is implementation defined whether cacheable stores update the cache when the cache is disabled it is not expected that any portable code will execute cacheable stores when the cache is disabled. For implementations of Cortex-A15 configured without the “L2 arbitration register slice” option (typically one or two core systems), you must also do the following: 3) Disable write-streaming in each CPU by setting ACTLR[28:25] = 0b1111 So, we provide an option to disable write streaming on OMAP5 and DRA7. It is a rare condition to occur and may be enabled selectively based on platform acceptance of risk. Applies to: A15 revisions r2p0, r2p1, r2p2, r2p3 or r2p4 and REVIDR[3] is set to 0. Based on ARM errata Document revision 18.0 (22 Nov 2013) Note: the configuration for the workaround needs to be done with each CPU bringup, since CPU0 bringup is done by bootloader, it is recommended to have the workaround in the bootloader, kernel also does ensure that CPU0 has the workaround and makes the workaround active when CPU1 gets active. With CONFIG_SMP disabled, it is expected to be done by the bootloader. This does show significant degradation in synthetic tests such as mbw (https://packages.qa.debian.org/m/mbw.html) mbw -n 100 100|grep AVG (on a test platform) Without enabling the erratum: AVG Method: MEMCPY Elapsed: 0.13406 MiB: 100.00000 Copy: 745.913 MiB/s AVG Method: DUMB Elapsed: 0.06746 MiB: 100.00000 Copy: 1482.357 MiB/s AVG Method: MCBLOCK Elapsed: 0.03058 MiB: 100.00000 Copy: 3270.569 MiB/s After enabling the erratum: AVG Method: MEMCPY Elapsed: 0.13757 MiB: 100.00000 Copy: 726.913 MiB/s AVG Method: DUMB Elapsed: 0.12024 MiB: 100.00000 Copy: 831.668 MiB/s AVG Method: MCBLOCK Elapsed: 0.09243 MiB: 100.00000 Copy: 1081.942 MiB/s Most benchmarks are designed for specific performance analysis, so overall usecase must be considered before making a decision to enable/disable the erratum workaround. Pending internal investigation, the erratum is kept disabled by default. Cc: Russell King Cc: Catalin Marinas Cc: Tony Lindgren Suggested-by: Richard Woodruff Suggested-by: Brad Griffis Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 8 +++++++ arch/arm/mach-omap2/omap-secure.h | 1 + arch/arm/mach-omap2/omap-smp.c | 48 +++++++++++++++++++++++++++++++++++---- 3 files changed, 52 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 0517f0c1581a..a63d3fe2ca46 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -240,4 +240,12 @@ endmenu endif +config OMAP5_ERRATA_801819 + bool "Errata 801819: An eviction from L1 data cache might stall indefinitely" + depends on SOC_OMAP5 || SOC_DRA7XX + help + A livelock can occur in the L2 cache arbitration that might prevent + a snoop from completing. Under certain conditions this can cause the + system to deadlock. + endmenu diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index af2851fbcdf0..bae263fba640 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -46,6 +46,7 @@ #define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX 0x109 #define OMAP5_MON_AMBA_IF_INDEX 0x108 +#define OMAP5_DRA7_MON_SET_ACR_INDEX 0x107 /* Secure PPA(Primary Protected Application) APIs */ #define OMAP4_PPA_L2_POR_INDEX 0x23 diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index c625cc10d9f9..8cd1de914ee4 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -50,6 +50,39 @@ void __iomem *omap4_get_scu_base(void) return scu_base; } +#ifdef CONFIG_OMAP5_ERRATA_801819 +void omap5_erratum_workaround_801819(void) +{ + u32 acr, revidr; + u32 acr_mask; + + /* REVIDR[3] indicates erratum fix available on silicon */ + asm volatile ("mrc p15, 0, %0, c0, c0, 6" : "=r" (revidr)); + if (revidr & (0x1 << 3)) + return; + + asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); + /* + * BIT(27) - Disables streaming. All write-allocate lines allocate in + * the L1 or L2 cache. + * BIT(25) - Disables streaming. All write-allocate lines allocate in + * the L1 cache. + */ + acr_mask = (0x3 << 25) | (0x3 << 27); + /* do we already have it done.. if yes, skip expensive smc */ + if ((acr & acr_mask) == acr_mask) + return; + + acr |= acr_mask; + omap_smc1(OMAP5_DRA7_MON_SET_ACR_INDEX, acr); + + pr_debug("%s: ARM erratum workaround 801819 applied on CPU%d\n", + __func__, smp_processor_id()); +} +#else +static inline void omap5_erratum_workaround_801819(void) { } +#endif + static void omap4_secondary_init(unsigned int cpu) { /* @@ -64,12 +97,15 @@ static void omap4_secondary_init(unsigned int cpu) omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX, 4, 0, 0, 0, 0, 0); - /* - * Configure the CNTFRQ register for the secondary cpu's which - * indicates the frequency of the cpu local timers. - */ - if (soc_is_omap54xx() || soc_is_dra7xx()) + if (soc_is_omap54xx() || soc_is_dra7xx()) { + /* + * Configure the CNTFRQ register for the secondary cpu's which + * indicates the frequency of the cpu local timers. + */ set_cntfreq(); + /* Configure ACR to disable streaming WA for 801819 */ + omap5_erratum_workaround_801819(); + } /* * Synchronise with the boot thread. @@ -218,6 +254,8 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) if (cpu_is_omap446x()) startup_addr = omap4460_secondary_startup; + if (soc_is_dra74x() || soc_is_omap54xx()) + omap5_erratum_workaround_801819(); /* * Write the address of secondary startup routine into the -- cgit v1.2.3 From 49111cd1c5498d2a356b0e51d74987dad0e88530 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 12 May 2016 13:29:48 -0700 Subject: ARM: dts: Fix igepv5 audiopwon-gpio MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Playing audio works on omap5-uevm, but produces an "Unhandled fault: imprecise external abort (0x1406) at 0x00000000" error on igepv5. Looks like the twl6040 audpwron GPIO pin is different for these boards. Let's fix the issue by configuring the audpwron in the board specific dts file. Cc: Agustí Fontquerni Cc: Eduard Gavin Cc: Enric Balletbo i Serra Acked-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-board-common.dtsi | 3 ++- arch/arm/boot/dts/omap5-igep0050.dts | 10 ++++++++++ arch/arm/boot/dts/omap5-uevm.dts | 10 ++++++++++ 3 files changed, 22 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index ebbaa140355b..c6aa65a68642 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -643,7 +643,8 @@ pinctrl-0 = <&twl6040_pins>; interrupts = ; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ + + /* audpwron gpio defined in the board specific dts */ vio-supply = <&smps7_reg>; v2v1-supply = <&smps9_reg>; diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index 46ecb1dd3b5c..700966b85575 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -52,3 +52,13 @@ <&gpio7 3 0>; /* 195, SDA */ }; +&twl6040 { + ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio line 144 */ +}; + +&twl6040_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_144 */ + OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ + >; +}; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 60b3fbb3bf07..a51e60518eb6 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -51,3 +51,13 @@ <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ }; + +&twl6040 { + ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ +}; + +&twl6040_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ + >; +}; -- cgit v1.2.3 From e0e80d43fc0c5aace76a6c5f9462a1aec3e004f8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 12 May 2016 13:29:48 -0700 Subject: ARM: dts: Fix uart wakeirq on omap5 by removing WAKEUP_EN for omaps The padconf register WAKEUP_EN is now handled in a generic way using Linux wakeirqs where pinctrl-single toggles the WAKEUP_EN bit when a wakeirq is enabled or disabled. At least omap5 gets confused if the WAKEUP_EN bit is set and the pin is not claimed as a wakeirq. The end result is that wakeirqs don't work properly as there is nothing handling the wakeirq. So let's just remove the WAKEUP_EN usage from dts files. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-evm-37xx.dts | 2 +- arch/arm/boot/dts/omap3-n900.dts | 4 ++-- arch/arm/boot/dts/omap3-n950-n9.dtsi | 6 +++--- arch/arm/boot/dts/omap3-zoom3.dts | 6 +++--- arch/arm/boot/dts/omap5-board-common.dtsi | 2 +- 5 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 76056ba92ced..ed449827c3d3 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -85,7 +85,7 @@ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ - OMAP3_CORE1_IOPAD(0x215e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ >; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b3c26a96a726..9c9e2ae6d6aa 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -288,7 +288,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ @@ -300,7 +300,7 @@ modem_pins: pinmux_modem { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ - OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index a00ca761675d..927b17fc4ed8 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -97,7 +97,7 @@ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ @@ -110,7 +110,7 @@ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */ @@ -120,7 +120,7 @@ modem_pins1: pinmux_modem_core1_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ + OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */ >; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index f19170bdcc1f..c29b41dc7b95 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -98,7 +98,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ - OMAP3_CORE1_IOPAD(0x217a, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; @@ -107,7 +107,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ - OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; @@ -125,7 +125,7 @@ pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ - OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ >; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index c6aa65a68642..9851b5767ec4 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -332,7 +332,7 @@ wlcore_irq_pin: pinmux_wlcore_irq_pin { pinctrl-single,pins = < - OMAP5_IOPAD(0x40, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ + OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ >; }; }; -- cgit v1.2.3 From 6c05495d6d0507a6e7886265f82339bebf25cfed Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 12 May 2016 13:29:48 -0700 Subject: ARM: dts: Fix ldo7 source for HDMI on igepv5 Fix ldo7 source for HDMI on igepv5. Suggested-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-igep0050.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index 700966b85575..f75ce02fb398 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -35,6 +35,22 @@ }; }; +/* LDO4 is VPP1 - ball AD9 */ +&ldo4_reg { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; +}; + +/* + * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33, + * VDDA_HDMI - ball AN25 + */ +&ldo7_reg { + status = "okay"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + &omap5_pmx_core { i2c4_pins: pinmux_i2c4_pins { pinctrl-single,pins = < -- cgit v1.2.3 From 54c78870e4d70420b887d712a3e73a6783d5b51d Mon Sep 17 00:00:00 2001 From: Nicolas Chauvet Date: Tue, 10 May 2016 12:14:57 +0200 Subject: ARM: dts: Add non-removable to hsmmc on hp-t410 This will clean-up warnings at boot, since either that or cd-gpio{,s} are mandated by the dts specification of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@47810000[0]' of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@47810000[0]' v2: use the generic non-removable instead of ti,non-removable Signed-off-by: Nicolas Chauvet Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dm8148-t410.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 5d4313fd5a46..97000b521cea 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -53,6 +53,7 @@ dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */ &edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */ dma-names = "tx", "rx"; + non-removable; }; &pincntl { -- cgit v1.2.3 From 1ddbef4d596ce51bf25825549bc5865de08a7e62 Mon Sep 17 00:00:00 2001 From: Nicolas Chauvet Date: Tue, 10 May 2016 12:14:58 +0200 Subject: ARM: dts: disable mmc by default and enable when needed for dm814x This patch disable mmc nodes by default in the dm814x.dtsi and enable only when needed on a given dts v2: Disable un-used mmc nodes on the related boards dts files instead of from the included SOC dts Signed-off-by: Nicolas Chauvet Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dm8148-evm.dts | 8 ++++++++ arch/arm/boot/dts/dm8148-t410.dts | 8 ++++++++ 2 files changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index cbc17b0794b1..4128fa91823c 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -93,6 +93,10 @@ }; }; +&mmc1 { + status = "disabled"; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pins>; @@ -101,6 +105,10 @@ cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; }; +&mmc3 { + status = "disabled"; +}; + &pincntl { sd1_pins: pinmux_sd1_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 97000b521cea..3f184863e0c5 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -45,6 +45,14 @@ phy-mode = "rgmii"; }; +&mmc1 { + status = "disabled"; +}; + +&mmc2 { + status = "disabled"; +}; + &mmc3 { pinctrl-names = "default"; pinctrl-0 = <&sd2_pins>; -- cgit v1.2.3 From 10ce2404ccab6828f86fb038e4888837f49f9f48 Mon Sep 17 00:00:00 2001 From: Franklin S Cooper Jr Date: Wed, 4 May 2016 12:43:55 -0500 Subject: ARM: dts: dra7: Add gpmc dma channel Add dma channel information to the gpmc. Signed-off-by: Franklin S Cooper Jr Signed-off-by: Sekhar Nori Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index e0074014385a..3a8f3976f6f9 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1451,6 +1451,8 @@ ti,hwmods = "gpmc"; reg = <0x50000000 0x37c>; /* device IO registers */ interrupts = ; + dmas = <&edma_xbar 4 0>; + dma-names = "rxtx"; gpmc,num-cs = <8>; gpmc,num-waitpins = <2>; #address-cells = <2>; -- cgit v1.2.3 From 3d9f77be066ccf8d364928154552ed6ca910793b Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 6 May 2016 08:37:57 -0500 Subject: ARM: dts: am57xx-idk-common: Fix input supply names Palmas Regulator is an exception and does not follow the standard "vin-supply" common definitions for all regulators, as a result of this, the input supplies are not reported to regulator framework, with the obvious result of not being appropriately mapped. Fix the same. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-idk-common.dtsi | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index b01a5948cdd0..0e63b9dff6e7 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -60,10 +60,26 @@ tps659038_pmic { compatible = "ti,tps659038-pmic"; + + smps12-in-supply = <&vmain>; + smps3-in-supply = <&vmain>; + smps45-in-supply = <&vmain>; + smps6-in-supply = <&vmain>; + smps7-in-supply = <&vmain>; + smps8-in-supply = <&vmain>; + smps9-in-supply = <&vmain>; + ldo1-in-supply = <&vmain>; + ldo2-in-supply = <&vmain>; + ldo3-in-supply = <&vmain>; + ldo4-in-supply = <&vmain>; + ldo9-in-supply = <&vmain>; + ldoln-in-supply = <&vmain>; + ldousb-in-supply = <&vmain>; + ldortc-in-supply = <&vmain>; + regulators { smps12_reg: smps12 { /* VDD_MPU */ - vin-supply = <&vmain>; regulator-name = "smps12"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; @@ -73,7 +89,6 @@ smps3_reg: smps3 { /* VDD_DDR EMIF1 EMIF2 */ - vin-supply = <&vmain>; regulator-name = "smps3"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; @@ -84,7 +99,6 @@ smps45_reg: smps45 { /* VDD_DSPEVE on AM572 */ /* VDD_IVA + VDD_DSP on AM571 */ - vin-supply = <&vmain>; regulator-name = "smps45"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; @@ -94,7 +108,6 @@ smps6_reg: smps6 { /* VDD_GPU */ - vin-supply = <&vmain>; regulator-name = "smps6"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; @@ -104,7 +117,6 @@ smps7_reg: smps7 { /* VDD_CORE */ - vin-supply = <&vmain>; regulator-name = "smps7"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; @@ -115,13 +127,11 @@ smps8_reg: smps8 { /* 5728 - VDD_IVAHD */ /* 5718 - N.C. test point */ - vin-supply = <&vmain>; regulator-name = "smps8"; }; smps9_reg: smps9 { /* VDD_3_3D */ - vin-supply = <&vmain>; regulator-name = "smps9"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -132,7 +142,6 @@ ldo1_reg: ldo1 { /* VDDSHV8 - VSDMMC */ /* NOTE: on rev 1.3a, data supply */ - vin-supply = <&vmain>; regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -142,7 +151,6 @@ ldo2_reg: ldo2 { /* VDDSH18V */ - vin-supply = <&vmain>; regulator-name = "ldo2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -152,7 +160,6 @@ ldo3_reg: ldo3 { /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */ - vin-supply = <&vmain>; regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -162,7 +169,6 @@ ldo4_reg: ldo4 { /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/ - vin-supply = <&vmain>; regulator-name = "ldo4"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -174,7 +180,6 @@ ldo9_reg: ldo9 { /* VDD_RTC */ - vin-supply = <&vmain>; regulator-name = "ldo9"; regulator-min-microvolt = <840000>; regulator-max-microvolt = <1160000>; @@ -184,7 +189,6 @@ ldoln_reg: ldoln { /* VDDA_1V8_PLL */ - vin-supply = <&vmain>; regulator-name = "ldoln"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -194,7 +198,6 @@ ldousb_reg: ldousb { /* VDDA_3V_USB: VDDA_USBHS33 */ - vin-supply = <&vmain>; regulator-name = "ldousb"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -204,7 +207,6 @@ ldortc_reg: ldortc { /* VDDA_RTC */ - vin-supply = <&vmain>; regulator-name = "ldortc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; -- cgit v1.2.3 From 65db875d110b8e517f81fa71c57a65fc6d0019ac Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Thu, 12 May 2016 13:20:52 -0500 Subject: ARM: OMAP2+: AM43XX: Enable fixes for Cortex-A9 errata This patch explicitly enables the fixes for the below errata applicable for AM43x Socs as was done for OMAP4. 754322: Faulty MMU translations following ASID switch 775420: A data cache maintenance operation which aborts, followed by an ISB, without any DSB in-between, might lead to deadlock Signed-off-by: Dave Gerlach Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a63d3fe2ca46..415a0bd0cda6 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -67,6 +67,8 @@ config SOC_AM43XX select HAVE_ARM_SCU select GENERIC_CLOCKEVENTS_BROADCAST select HAVE_ARM_TWD + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 config SOC_DRA7XX bool "TI DRA7XX" -- cgit v1.2.3 From b44f788cce4086da00fd2f14b6b4d5abcf85f842 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Fri, 6 May 2016 23:02:33 +0200 Subject: ARM: dts: igep00x0: Add SD card-detect. Fix SD card remove/insert detection by adding the correct card-detect pin. All IGEP OMAP3 based boards use the same card-detect pin. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Ladislav Michl Reviewed-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 41f5d386f21f..f4f2ce46d681 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -188,6 +188,7 @@ vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; bus-width = <4>; + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; }; &mmc3 { -- cgit v1.2.3 From a1f6ad14176d466c00e6a687f9c78ec6c7ad6bf8 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Fri, 6 May 2016 23:02:34 +0200 Subject: ARM: dts: igep0020: Add SD card write-protect pin. A host device that supports write protection should refuse to write to an SD card that is designated read-only when write-protect is set. This is an optional feature of the SD specification. Signed-off-by: Enric Balletbo i Serra Reviewed-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep0020-common.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index d6f839cab649..b6971060648a 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -194,6 +194,12 @@ OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */ >; }; + + mmc1_wp_pins: pinmux_mmc1_cd_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4) /* etk_d15.gpio_29 */ + >; + }; }; &i2c3 { @@ -250,3 +256,8 @@ }; }; }; + +&mmc1 { + pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>; + wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */ +}; -- cgit v1.2.3 From a3e5afe491bf7462013aa9f0bb3b55e3d05b784d Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Thu, 28 Apr 2016 23:39:53 +0900 Subject: iio: pressure: bmp280: fix error message for wrong chip id The bmp280 driver also supports BMP180 which has a different chip id with BMP280. The probe routine verifies that the device reports the correct chip id but the error message is confusing as if BMP280's chip id is always expected. Reported-by: Matt Ranostay Signed-off-by: Akinobu Mita Cc: Matt Ranostay Cc: Vlad Dogaru Cc: Christoph Mair Cc: Jonathan Cameron Cc: Hartmut Knaack Cc: Lars-Peter Clausen Cc: Peter Meerwald Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c index 2f1498e12bb2..724452d61846 100644 --- a/drivers/iio/pressure/bmp280.c +++ b/drivers/iio/pressure/bmp280.c @@ -879,8 +879,8 @@ static int bmp280_probe(struct i2c_client *client, if (ret < 0) return ret; if (chip_id != id->driver_data) { - dev_err(&client->dev, "bad chip id. expected %x got %x\n", - BMP280_CHIP_ID, chip_id); + dev_err(&client->dev, "bad chip id. expected %lx got %x\n", + id->driver_data, chip_id); return -EINVAL; } -- cgit v1.2.3 From 4cb54493ab2003568222e6ad7449747354f22ce3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 12 May 2016 10:38:31 +0200 Subject: ARM: samsung: improve static dma_mask definition When no DMA master devices are part of the kernel configuration, we get a warning about the unused dma mask definition: arch/arm/plat-samsung/devs.c:71:12: error: 'samsung_device_dma_mask' defined but not used [-Werror=unused-variable] static u64 samsung_device_dma_mask = DMA_BIT_MASK(32); We could simply mark this as __maybe_unused to shut up that warning, but a nicer solution seems to be to have a separate mask for each device. The advantage is that a driver that happens to call dma_set_mask() on one device doesn't implicitly change the mask for the other devices as well. This is more of a theoretical problem, as obviously nothing does it for the devices in this file (or they would have always been broken), but it feels cleaner that way. The definition works by creating an array in place so we can take the address of it and let the compiler generate a hidden symbol for it at compile time. Signed-off-by: Arnd Bergmann Signed-off-by: Krzysztof Kozlowski --- arch/arm/plat-samsung/devs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 84baa16f4c0b..e93aa6734147 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -68,7 +68,7 @@ #include #include -static u64 samsung_device_dma_mask = DMA_BIT_MASK(32); +#define samsung_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) })) /* AC97 */ #ifdef CONFIG_CPU_S3C2440 -- cgit v1.2.3 From 8a6f71ccb6c39ca5ae442d1478d3a076e2b1361e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 18 May 2016 16:17:36 +0200 Subject: ARM: exynos: don't select keyboard driver The samsung-keypad driver is implicitly selected by ARCH_EXYNOS4 (why?), but this fails if CONFIG_INPUT is a loadable module: drivers/input/built-in.o: In function `samsung_keypad_remove': drivers/input/keyboard/samsung-keypad.c:461: undefined reference to `input_unregister_device' drivers/input/built-in.o: In function `samsung_keypad_irq': drivers/input/keyboard/samsung-keypad.c:137: undefined reference to `input_event' drivers/input/built-in.o: In function `samsung_keypad_irq': include/linux/input.h:389: undefined reference to `input_event' drivers/input/built-in.o: In function `samsung_keypad_probe': drivers/input/keyboard/samsung-keypad.c:358: undefined reference to `devm_input_allocate_device' drivers/input/built-in.o:(.debug_addr+0x34): undefined reference to `input_set_capability' This removes the 'select' as suggested by Krzysztof Kozlowski and instead enables the driver from the defconfig files. The problem does not happen on mainline kernels, as we don't normally build built-in input drivers when CONFIG_INPUT=m, but I am experimenting with a patch to change this, and the samsung keypad driver showed up as one example that was silently broken before. Signed-off-by: Arnd Bergmann Link: https://lkml.org/lkml/2016/2/14/55 Signed-off-by: Krzysztof Kozlowski --- arch/arm/configs/exynos_defconfig | 1 + arch/arm/configs/multi_v7_defconfig | 1 + arch/arm/mach-exynos/Kconfig | 1 - 3 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 6ffd7e76f3ce..1a197fc8fdc7 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -77,6 +77,7 @@ CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MAX77693_HAPTIC=y CONFIG_INPUT_MAX8997_HAPTIC=y +CONFIG_KEYBOARD_SAMSUNG=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 28234906a064..ad97a41ceb35 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -260,6 +260,7 @@ CONFIG_KEYBOARD_TEGRA=y CONFIG_KEYBOARD_SPEAR=y CONFIG_KEYBOARD_ST_KEYSCAN=y CONFIG_KEYBOARD_CROS_EC=m +CONFIG_KEYBOARD_SAMSUNG=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_CYAPA=m CONFIG_MOUSE_ELAN_I2C=y diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 207fa2c737a6..c0d9f334d1d0 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -58,7 +58,6 @@ config ARCH_EXYNOS4 select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 select CPU_EXYNOS4210 select GIC_NON_BANKED - select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select MIGHT_HAVE_CACHE_L2X0 help Samsung EXYNOS4 (Cortex-A9) SoC based systems -- cgit v1.2.3 From 0fa963553a5c28d8f8aabd8878326d3f782045fc Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Thu, 12 May 2016 18:10:48 +0200 Subject: s390/bpf: reduce maximum program size to 64 KB The s390 BFP compiler currently uses relative branch instructions that only support jumps up to 64 KB. Examples are "j", "jnz", "cgrj", etc. Currently the maximum size of s390 BPF programs is set to 0x7ffff. If branches over 64 KB are generated the, kernel can crash due to incorrect code. So fix this an reduce the maximum size to 64 KB. Programs larger than that will be interpreted. Fixes: ce2b6ad9c185 ("s390/bpf: increase BPF_SIZE_MAX") Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/net/bpf_jit_comp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 9133b0ec000b..b36c74f4c937 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -45,7 +45,7 @@ struct bpf_jit { int labels[1]; /* Labels for local jumps */ }; -#define BPF_SIZE_MAX 0x7ffff /* Max size for program (20 bit signed displ) */ +#define BPF_SIZE_MAX 0xffff /* Max size for program (16 bit branches) */ #define SEEN_SKB 1 /* skb access */ #define SEEN_MEM 2 /* use mem[] for temporary storage */ -- cgit v1.2.3 From 6edf0aa4f8bbdfbb4d6d786892fa02728d05dc36 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Wed, 11 May 2016 21:13:13 +0200 Subject: s390/bpf: fix recache skb->data/hlen for skb_vlan_push/pop In case of usage of skb_vlan_push/pop, in the prologue we store the SKB pointer on the stack and restore it after BPF_JMP_CALL to skb_vlan_push/pop. Unfortunately currently there are two bugs in the code: 1) The wrong stack slot (offset 170 instead of 176) is used 2) The wrong register (W1 instead of B1) is saved So fix this and use correct stack slot and register. Fixes: 9db7f2b81880 ("s390/bpf: recache skb->data/hlen for skb_vlan_push/pop") Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/net/bpf_jit.h | 4 ++-- arch/s390/net/bpf_jit_comp.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/s390/net/bpf_jit.h b/arch/s390/net/bpf_jit.h index f010c93a88b1..fda605dbc1b4 100644 --- a/arch/s390/net/bpf_jit.h +++ b/arch/s390/net/bpf_jit.h @@ -37,7 +37,7 @@ extern u8 sk_load_word[], sk_load_half[], sk_load_byte[]; * | | | * +---------------+ | * | 8 byte skbp | | - * R15+170 -> +---------------+ | + * R15+176 -> +---------------+ | * | 8 byte hlen | | * R15+168 -> +---------------+ | * | 4 byte align | | @@ -58,7 +58,7 @@ extern u8 sk_load_word[], sk_load_half[], sk_load_byte[]; #define STK_OFF (STK_SPACE - STK_160_UNUSED) #define STK_OFF_TMP 160 /* Offset of tmp buffer on stack */ #define STK_OFF_HLEN 168 /* Offset of SKB header length on stack */ -#define STK_OFF_SKBP 170 /* Offset of SKB pointer on stack */ +#define STK_OFF_SKBP 176 /* Offset of SKB pointer on stack */ #define STK_OFF_R6 (160 - 11 * 8) /* Offset of r6 on stack */ #define STK_OFF_TCCNT (160 - 12 * 8) /* Offset of tail_call_cnt on stack */ diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index b36c74f4c937..bee281f3163d 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -450,7 +450,7 @@ static void bpf_jit_prologue(struct bpf_jit *jit) emit_load_skb_data_hlen(jit); if (jit->seen & SEEN_SKB_CHANGE) /* stg %b1,ST_OFF_SKBP(%r0,%r15) */ - EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, REG_15, + EMIT6_DISP_LH(0xe3000000, 0x0024, BPF_REG_1, REG_0, REG_15, STK_OFF_SKBP); } -- cgit v1.2.3 From 585d70006f6e30f42e96d56c6c0933671c516c7b Mon Sep 17 00:00:00 2001 From: Alden Tondettar Date: Wed, 18 May 2016 14:09:17 -0700 Subject: udf: Don't BUG on missing metadata partition descriptor Currently, if a metadata partition map is missing its partition descriptor, then udf_get_pblock_meta25() will BUG() out the first time it is called. This is rather drastic for a corrupted filesystem, so just treat this case as an invalid mapping instead. Signed-off-by: Alden Tondettar Signed-off-by: Jan Kara --- fs/udf/partition.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/udf/partition.c b/fs/udf/partition.c index 5f861ed287c3..e4e9e70c37f2 100644 --- a/fs/udf/partition.c +++ b/fs/udf/partition.c @@ -317,8 +317,9 @@ uint32_t udf_get_pblock_meta25(struct super_block *sb, uint32_t block, mdata = &map->s_type_specific.s_metadata; inode = mdata->s_metadata_fe ? : mdata->s_mirror_fe; - /* We shouldn't mount such media... */ - BUG_ON(!inode); + if (!inode) + return 0xFFFFFFFF; + retblk = udf_try_read_meta(inode, block, partition, offset); if (retblk == 0xFFFFFFFF && mdata->s_metadata_fe) { udf_warn(sb, "error reading from METADATA, trying to read from MIRROR\n"); -- cgit v1.2.3 From 3743a03e72b73b6234768bce06d7bf5a57c47285 Mon Sep 17 00:00:00 2001 From: Alden Tondettar Date: Wed, 18 May 2016 14:09:18 -0700 Subject: udf: Use IS_ERR when loading metadata mirror file entry Currently when udf_get_pblock_meta25() fails to map a block using the primary metadata file, it will attempt to load the mirror file entry by calling udf_find_metadata_inode_efe(). That function will return a ERR_PTR if it fails, but the return value is only checked against NULL. Test the return value using IS_ERR() and change it to NULL if needed. Signed-off-by: Alden Tondettar Signed-off-by: Jan Kara --- fs/udf/partition.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/udf/partition.c b/fs/udf/partition.c index e4e9e70c37f2..ca3cde336324 100644 --- a/fs/udf/partition.c +++ b/fs/udf/partition.c @@ -326,6 +326,8 @@ uint32_t udf_get_pblock_meta25(struct super_block *sb, uint32_t block, if (!(mdata->s_flags & MF_MIRROR_FE_LOADED)) { mdata->s_mirror_fe = udf_find_metadata_inode_efe(sb, mdata->s_mirror_file_loc, map->s_partition_num); + if (IS_ERR(mdata->s_mirror_fe)) + mdata->s_mirror_fe = NULL; mdata->s_flags |= MF_MIRROR_FE_LOADED; } -- cgit v1.2.3 From d462e32259810aaaf13440b033b99e1aad33eccd Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 18 May 2016 13:39:05 +0300 Subject: crypto: omap-sham - potential Oops on error in probe This if statement is reversed so we end up either leaking or Oopsing on error. Fixes: dbe246209bc1 ('crypto: omap-sham - Use dma_request_chan() for requesting DMA channel') Signed-off-by: Dan Carpenter Acked-by: Peter Ujfalusi Signed-off-by: Herbert Xu --- drivers/crypto/omap-sham.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c index 6eefaa2fe58f..63464e86f2b1 100644 --- a/drivers/crypto/omap-sham.c +++ b/drivers/crypto/omap-sham.c @@ -1986,7 +1986,7 @@ err_algs: &dd->pdata->algs_info[i].algs_list[j]); err_pm: pm_runtime_disable(dev); - if (dd->polling_mode) + if (!dd->polling_mode) dma_release_channel(dd->dma_lch); data_err: dev_err(dev, "initialization failed.\n"); -- cgit v1.2.3 From bad6a185b4d6f81d0ed2b6e4c16307969f160b95 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 18 May 2016 16:55:56 +0200 Subject: crypto: public_key: select CRYPTO_AKCIPHER In some rare randconfig builds, we can end up with ASYMMETRIC_PUBLIC_KEY_SUBTYPE enabled but CRYPTO_AKCIPHER disabled, which fails to link because of the reference to crypto_alloc_akcipher: crypto/built-in.o: In function `public_key_verify_signature': :(.text+0x110e4): undefined reference to `crypto_alloc_akcipher' This adds a Kconfig 'select' statement to ensure the dependency is always there. Cc: Signed-off-by: Arnd Bergmann Signed-off-by: Herbert Xu --- crypto/asymmetric_keys/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig index 91a7e047a765..477cbf39e0fb 100644 --- a/crypto/asymmetric_keys/Kconfig +++ b/crypto/asymmetric_keys/Kconfig @@ -13,6 +13,7 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE tristate "Asymmetric public-key crypto algorithm subtype" select MPILIB select CRYPTO_HASH_INFO + select CRYPTO_AKCIPHER help This option provides support for asymmetric public key type handling. If signature generation and/or verification are to be used, -- cgit v1.2.3 From 7888824b0b1c9c3753d2aedf1d00e7a1c20c18af Mon Sep 17 00:00:00 2001 From: Alden Tondettar Date: Wed, 18 May 2016 14:09:19 -0700 Subject: udf: Use correct partition reference number for metadata UDF/OSTA terminology is confusing. Partition Numbers (PNs) are arbitrary 16-bit values, one for each physical partition in the volume. Partition Reference Numbers (PRNs) are indices into the the Partition Map Table and do not necessarily equal the PN of the mapped partition. The current metadata code mistakenly uses the PN instead of the PRN when mapping metadata blocks to physical/sparable blocks. Windows-created UDF 2.5 discs for some reason use large, arbitrary PNs, resulting in mount failure and KASAN read warnings in udf_read_inode(). For example, a NetBSD UDF 2.5 partition might look like this: PRN PN Type --- -- ---- 0 0 Sparable 1 0 Metadata Since PRN == PN, we are fine. But Windows could gives us: PRN PN Type --- ---- ---- 0 8192 Sparable 1 8192 Metadata So udf_read_inode() will start out by checking the partition length in sbi->s_partmaps[8192], which is obviously out of bounds. Fix this by creating a new field (s_phys_partition_ref) in struct udf_meta_data, referencing whatever physical or sparable map has the same partition number as the metadata partition. [JK: Add comment about s_phys_partition_ref, change its name] Signed-off-by: Alden Tondettar Signed-off-by: Jan Kara --- fs/udf/partition.c | 6 ++++-- fs/udf/super.c | 22 ++++++++++++---------- fs/udf/udf_sb.h | 5 +++++ 3 files changed, 21 insertions(+), 12 deletions(-) diff --git a/fs/udf/partition.c b/fs/udf/partition.c index ca3cde336324..888c364b2fe9 100644 --- a/fs/udf/partition.c +++ b/fs/udf/partition.c @@ -295,7 +295,8 @@ static uint32_t udf_try_read_meta(struct inode *inode, uint32_t block, map = &UDF_SB(sb)->s_partmaps[partition]; /* map to sparable/physical partition desc */ phyblock = udf_get_pblock(sb, eloc.logicalBlockNum, - map->s_partition_num, ext_offset + offset); + map->s_type_specific.s_metadata.s_phys_partition_ref, + ext_offset + offset); } brelse(epos.bh); @@ -325,7 +326,8 @@ uint32_t udf_get_pblock_meta25(struct super_block *sb, uint32_t block, udf_warn(sb, "error reading from METADATA, trying to read from MIRROR\n"); if (!(mdata->s_flags & MF_MIRROR_FE_LOADED)) { mdata->s_mirror_fe = udf_find_metadata_inode_efe(sb, - mdata->s_mirror_file_loc, map->s_partition_num); + mdata->s_mirror_file_loc, + mdata->s_phys_partition_ref); if (IS_ERR(mdata->s_mirror_fe)) mdata->s_mirror_fe = NULL; mdata->s_flags |= MF_MIRROR_FE_LOADED; diff --git a/fs/udf/super.c b/fs/udf/super.c index 5e2c8c814e1b..4942549e7dc8 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -951,13 +951,13 @@ out2: } struct inode *udf_find_metadata_inode_efe(struct super_block *sb, - u32 meta_file_loc, u32 partition_num) + u32 meta_file_loc, u32 partition_ref) { struct kernel_lb_addr addr; struct inode *metadata_fe; addr.logicalBlockNum = meta_file_loc; - addr.partitionReferenceNum = partition_num; + addr.partitionReferenceNum = partition_ref; metadata_fe = udf_iget_special(sb, &addr); @@ -974,7 +974,8 @@ struct inode *udf_find_metadata_inode_efe(struct super_block *sb, return metadata_fe; } -static int udf_load_metadata_files(struct super_block *sb, int partition) +static int udf_load_metadata_files(struct super_block *sb, int partition, + int type1_index) { struct udf_sb_info *sbi = UDF_SB(sb); struct udf_part_map *map; @@ -984,20 +985,21 @@ static int udf_load_metadata_files(struct super_block *sb, int partition) map = &sbi->s_partmaps[partition]; mdata = &map->s_type_specific.s_metadata; + mdata->s_phys_partition_ref = type1_index; /* metadata address */ udf_debug("Metadata file location: block = %d part = %d\n", - mdata->s_meta_file_loc, map->s_partition_num); + mdata->s_meta_file_loc, mdata->s_phys_partition_ref); fe = udf_find_metadata_inode_efe(sb, mdata->s_meta_file_loc, - map->s_partition_num); + mdata->s_phys_partition_ref); if (IS_ERR(fe)) { /* mirror file entry */ udf_debug("Mirror metadata file location: block = %d part = %d\n", - mdata->s_mirror_file_loc, map->s_partition_num); + mdata->s_mirror_file_loc, mdata->s_phys_partition_ref); fe = udf_find_metadata_inode_efe(sb, mdata->s_mirror_file_loc, - map->s_partition_num); + mdata->s_phys_partition_ref); if (IS_ERR(fe)) { udf_err(sb, "Both metadata and mirror metadata inode efe can not found\n"); @@ -1015,7 +1017,7 @@ static int udf_load_metadata_files(struct super_block *sb, int partition) */ if (mdata->s_bitmap_file_loc != 0xFFFFFFFF) { addr.logicalBlockNum = mdata->s_bitmap_file_loc; - addr.partitionReferenceNum = map->s_partition_num; + addr.partitionReferenceNum = mdata->s_phys_partition_ref; udf_debug("Bitmap file location: block = %d part = %d\n", addr.logicalBlockNum, addr.partitionReferenceNum); @@ -1283,7 +1285,7 @@ static int udf_load_partdesc(struct super_block *sb, sector_t block) p = (struct partitionDesc *)bh->b_data; partitionNumber = le16_to_cpu(p->partitionNumber); - /* First scan for TYPE1, SPARABLE and METADATA partitions */ + /* First scan for TYPE1 and SPARABLE partitions */ for (i = 0; i < sbi->s_partitions; i++) { map = &sbi->s_partmaps[i]; udf_debug("Searching map: (%d == %d)\n", @@ -1333,7 +1335,7 @@ static int udf_load_partdesc(struct super_block *sb, sector_t block) goto out_bh; if (map->s_partition_type == UDF_METADATA_MAP25) { - ret = udf_load_metadata_files(sb, i); + ret = udf_load_metadata_files(sb, i, type1_idx); if (ret < 0) { udf_err(sb, "error loading MetaData partition map %d\n", i); diff --git a/fs/udf/udf_sb.h b/fs/udf/udf_sb.h index 27b5335730c9..c13875d669c0 100644 --- a/fs/udf/udf_sb.h +++ b/fs/udf/udf_sb.h @@ -61,6 +61,11 @@ struct udf_meta_data { __u32 s_bitmap_file_loc; __u32 s_alloc_unit_size; __u16 s_align_unit_size; + /* + * Partition Reference Number of the associated physical / sparable + * partition + */ + __u16 s_phys_partition_ref; int s_flags; struct inode *s_metadata_fe; struct inode *s_mirror_fe; -- cgit v1.2.3 From a118084432d642eeccb961c7c8cc61525a941fcb Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Fri, 20 May 2016 22:13:45 +0200 Subject: vfs: add d_real_inode() helper Needed by the following fix. Signed-off-by: Miklos Szeredi Cc: --- include/linux/dcache.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 7e9422cb5989..ad5d582f9b14 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -576,5 +576,17 @@ static inline struct inode *vfs_select_inode(struct dentry *dentry, return inode; } +/** + * d_real_inode - Return the real inode + * @dentry: The dentry to query + * + * If dentry is on an union/overlay, then return the underlying, real inode. + * Otherwise return d_inode(). + */ +static inline struct inode *d_real_inode(struct dentry *dentry) +{ + return d_backing_inode(d_real(dentry)); +} + #endif /* __LINUX_DCACHE_H */ -- cgit v1.2.3 From eb0a4a47ae89aaa0674ab3180de6a162f3be2ddf Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Fri, 20 May 2016 22:13:45 +0200 Subject: af_unix: fix hard linked sockets on overlay Overlayfs uses separate inodes even in the case of hard links on the underlying filesystems. This is a problem for AF_UNIX socket implementation which indexes sockets based on the inode. This resulted in hard linked sockets not working. The fix is to use the real, underlying inode. Test case follows: -- ovl-sock-test.c -- #include #include #include #include #define SOCK "test-sock" #define SOCK2 "test-sock2" int main(void) { int fd, fd2; struct sockaddr_un addr = { .sun_family = AF_UNIX, .sun_path = SOCK, }; struct sockaddr_un addr2 = { .sun_family = AF_UNIX, .sun_path = SOCK2, }; unlink(SOCK); unlink(SOCK2); if ((fd = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) err(1, "socket"); if (bind(fd, (struct sockaddr *) &addr, sizeof(addr)) == -1) err(1, "bind"); if (listen(fd, 0) == -1) err(1, "listen"); if (link(SOCK, SOCK2) == -1) err(1, "link"); if ((fd2 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) err(1, "socket"); if (connect(fd2, (struct sockaddr *) &addr2, sizeof(addr2)) == -1) err (1, "connect"); return 0; } ---- Reported-by: Alexander Morozov Signed-off-by: Miklos Szeredi Cc: --- net/unix/af_unix.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 8269da73e9e5..7748199b3568 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -315,7 +315,7 @@ static struct sock *unix_find_socket_byinode(struct inode *i) &unix_socket_table[i->i_ino & (UNIX_HASH_SIZE - 1)]) { struct dentry *dentry = unix_sk(s)->path.dentry; - if (dentry && d_backing_inode(dentry) == i) { + if (dentry && d_real_inode(dentry) == i) { sock_hold(s); goto found; } @@ -911,7 +911,7 @@ static struct sock *unix_find_other(struct net *net, err = kern_path(sunname->sun_path, LOOKUP_FOLLOW, &path); if (err) goto fail; - inode = d_backing_inode(path.dentry); + inode = d_real_inode(path.dentry); err = inode_permission(inode, MAY_WRITE); if (err) goto put_fail; @@ -1048,7 +1048,7 @@ static int unix_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) goto out_up; } addr->hash = UNIX_HASH_SIZE; - hash = d_backing_inode(dentry)->i_ino & (UNIX_HASH_SIZE - 1); + hash = d_real_inode(dentry)->i_ino & (UNIX_HASH_SIZE - 1); spin_lock(&unix_table_lock); u->path = u_path; list = &unix_socket_table[hash]; -- cgit v1.2.3 From 0e35cf5ce00d873d6e529d2b2cd7598d52438051 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Fri, 20 May 2016 10:06:41 -0700 Subject: iio: humidity: hdc100x: correct humidity integration time mask Apply the correct mask to enable all available humidity integration times. Currently, the driver defaults to 6500 and all is okay with that. However, if 3850 is selected we get a stuck bit and can't change back to 6500 or select 2500. (Verified with HDC1008) Signed-off-by: Alison Schofield Cc: Daniel Baluta Reviewed-by: Matt Ranostay Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/hdc100x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c index fa4767613173..59aa1cbdc2fd 100644 --- a/drivers/iio/humidity/hdc100x.c +++ b/drivers/iio/humidity/hdc100x.c @@ -55,7 +55,7 @@ static const struct { }, { /* IIO_HUMIDITYRELATIVE channel */ .shift = 8, - .mask = 2, + .mask = 3, }, }; -- cgit v1.2.3 From 1cb0d06a00f2ec0ed8f926ec62f53bc9e12ea55e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 17 May 2016 11:02:56 +0300 Subject: iio: humidity: am2315: Remove a stray unlock We haven't taken the lock yet so we don't need to unlock here. Fixes: 0d96d5ead3f7 ('iio: humidity: Add triggered buffer support for AM2315') Signed-off-by: Dan Carpenter Acked-by: Tiberiu Breana Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/am2315.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c index 3be6d209a159..11535911a5c6 100644 --- a/drivers/iio/humidity/am2315.c +++ b/drivers/iio/humidity/am2315.c @@ -165,10 +165,8 @@ static irqreturn_t am2315_trigger_handler(int irq, void *p) struct am2315_sensor_data sensor_data; ret = am2315_read_data(data, &sensor_data); - if (ret < 0) { - mutex_unlock(&data->lock); + if (ret < 0) goto err; - } mutex_lock(&data->lock); if (*(indio_dev->active_scan_mask) == AM2315_ALL_CHANNEL_MASK) { -- cgit v1.2.3 From 14f2461b822dffb116256ee9155f7eca96064f7a Mon Sep 17 00:00:00 2001 From: Crestez Dan Leonard Date: Fri, 20 May 2016 17:44:36 +0300 Subject: max44000: Remove scale from proximity This is not implemented and doesn't really make sense because IIO proximity is unit-less. Remove IIO_CHAN_INFO_SCALE from info_mask because so that the _scale sysfs entry won't appear. This fixes userspace tools like generic_buffer which abort when reads returns an error. Signed-off-by: Crestez Dan Leonard Signed-off-by: Jonathan Cameron --- drivers/iio/light/max44000.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/iio/light/max44000.c b/drivers/iio/light/max44000.c index e01e58a9bd14..f17cb2ea18f5 100644 --- a/drivers/iio/light/max44000.c +++ b/drivers/iio/light/max44000.c @@ -147,7 +147,6 @@ static const struct iio_chan_spec max44000_channels[] = { { .type = IIO_PROXIMITY, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), .scan_index = MAX44000_SCAN_INDEX_PRX, .scan_type = { .sign = 'u', -- cgit v1.2.3 From a621bac3044ed6f7ec5fa0326491b2d4838bfa93 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 13 May 2016 12:04:06 -0700 Subject: scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands When SCSI was written, all commands coming from the filesystem (REQ_TYPE_FS commands) had data. This meant that our signal for needing to complete the command was the number of bytes completed being equal to the number of bytes in the request. Unfortunately, with the advent of flush barriers, we can now get zero length REQ_TYPE_FS commands, which confuse this logic because they satisfy the condition every time. This means they never get retried even for retryable conditions, like UNIT ATTENTION because we complete them early assuming they're done. Fix this by special casing the early completion condition to recognise zero length commands with errors and let them drop through to the retry code. Cc: stable@vger.kernel.org Reported-by: Sebastian Parschauer Signed-off-by: James E.J. Bottomley Tested-by: Jack Wang Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_lib.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index b2e332af0f51..c71344aebdbb 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -821,9 +821,12 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) } /* - * If we finished all bytes in the request we are done now. + * special case: failed zero length commands always need to + * drop down into the retry code. Otherwise, if we finished + * all bytes in the request we are done now. */ - if (!scsi_end_request(req, error, good_bytes, 0)) + if (!(blk_rq_bytes(req) == 0 && error) && + !scsi_end_request(req, error, good_bytes, 0)) return; /* -- cgit v1.2.3 From eb72d0bb84eee5d0dc3044fd17b75e7101dabb57 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Tue, 26 Apr 2016 08:06:58 +0200 Subject: sd: get disk reference in sd_check_events() sd_check_events() is called asynchronously, and might race with device removal. So always take a disk reference when processing the event to avoid the device being removed while the event is processed. Signed-off-by: Hannes Reinecke Reviewed-by: Ewan D. Milne Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 428c03ef02b2..f459dff30512 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1398,11 +1398,15 @@ static int media_not_present(struct scsi_disk *sdkp, **/ static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing) { - struct scsi_disk *sdkp = scsi_disk(disk); - struct scsi_device *sdp = sdkp->device; + struct scsi_disk *sdkp = scsi_disk_get(disk); + struct scsi_device *sdp; struct scsi_sense_hdr *sshdr = NULL; int retval; + if (!sdkp) + return 0; + + sdp = sdkp->device; SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n")); /* @@ -1459,6 +1463,7 @@ out: kfree(sshdr); retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0; sdp->changed = 0; + scsi_disk_put(sdkp); return retval; } -- cgit v1.2.3 From 7ebd67e0dece0ec53e5541fc600eda4e050fab72 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 12 May 2016 23:37:38 +0300 Subject: mpt3sas: add missing curly braces There are some missing curly braces on this if statement, so we end up printing when we shouldn't. Fixes: a470a51cd648 ('mpt3sas: Handle active cable exception event') Signed-off-by: Dan Carpenter Acked-by: Chaitra P B Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 6a4df5a315e9..6bff13e7afc7 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -7975,13 +7975,14 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, ActiveCableEventData = (Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData; if (ActiveCableEventData->ReasonCode == - MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER) + MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER) { pr_info(MPT3SAS_FMT "Currently an active cable with ReceptacleID %d", ioc->name, ActiveCableEventData->ReceptacleID); pr_info("cannot be powered and devices connected to this active cable"); pr_info("will not be seen. This active cable"); pr_info("requires %d mW of power", ActiveCableEventData->ActiveCablePowerRequirement); + } break; default: /* ignore the rest */ -- cgit v1.2.3 From 787ab6e97024926f38773287d9f98a9b330bce23 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 18 May 2016 10:16:51 +0200 Subject: aacraid: do not activate events on non-SRC adapters Only SRC-based adapters support the AifReqEvent function, so there is no point in trying to activate it on older, non-SRC based adapters. Doing so lead to crashes on older adapters. Signed-off-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Reviewed-by: Raghava Aditya Renukunta Signed-off-by: Martin K. Petersen --- drivers/scsi/aacraid/aacraid.h | 5 +++++ drivers/scsi/aacraid/linit.c | 11 ++++++----- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 8f90d9e77104..969c312de1be 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -620,6 +620,11 @@ struct aac_driver_ident */ #define AAC_QUIRK_SCSI_32 0x0020 +/* + * SRC based adapters support the AifReqEvent functions + */ +#define AAC_QUIRK_SRC 0x0040 + /* * The adapter interface specs all queues to be located in the same * physically contiguous block. The host structure that defines the diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index a943bd230bc2..79871f3519ff 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -236,10 +236,10 @@ static struct aac_driver_ident aac_drivers[] = { { aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Catch All */ { aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Rocket Catch All */ { aac_nark_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec NEMER/ARK Catch All */ - { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 6 (Tupelo) */ - { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 7 (Denali) */ - { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 8 */ - { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec PMC Series 9 */ + { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 6 (Tupelo) */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 7 (Denali) */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 8 */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC } /* Adaptec PMC Series 9 */ }; /** @@ -1299,7 +1299,8 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) else shost->this_id = shost->max_id; - aac_intr_normal(aac, 0, 2, 0, NULL); + if (aac_drivers[index].quirks & AAC_QUIRK_SRC) + aac_intr_normal(aac, 0, 2, 0, NULL); /* * dmb - we may need to move the setting of these parms somewhere else once -- cgit v1.2.3 From 5138806f16c74c7cb8ac3e408a859c79eb7c9567 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Sat, 21 May 2016 20:01:01 -0700 Subject: iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output IIO_CHAN_INFO_RAW was returning processed data which was incorrect. This also adds the IIO_CHAN_INFO_SCALE value to convert to a processed value. Signed-off-by: Matt Ranostay Cc: Signed-off-by: Jonathan Cameron --- Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 | 2 +- drivers/iio/proximity/as3935.c | 10 ++++++++-- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 index 6708c5e264aa..33e96f740639 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 +++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 @@ -1,4 +1,4 @@ -What /sys/bus/iio/devices/iio:deviceX/in_proximity_raw +What /sys/bus/iio/devices/iio:deviceX/in_proximity_input Date: March 2014 KernelVersion: 3.15 Contact: Matt Ranostay diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index f4d29d5dbd5f..f0a0defb68a4 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -72,7 +72,8 @@ static const struct iio_chan_spec as3935_channels[] = { .type = IIO_PROXIMITY, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_PROCESSED), + BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_SCALE), .scan_index = 0, .scan_type = { .sign = 'u', @@ -181,7 +182,12 @@ static int as3935_read_raw(struct iio_dev *indio_dev, /* storm out of range */ if (*val == AS3935_DATA_MASK) return -EINVAL; - *val *= 1000; + + if (m == IIO_CHAN_INFO_PROCESSED) + *val *= 1000; + break; + case IIO_CHAN_INFO_SCALE: + *val = 1000; break; default: return -EINVAL; -- cgit v1.2.3 From 7d0643634ea567969bf3f3ed6193a9d6fc75653b Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Sat, 21 May 2016 20:01:02 -0700 Subject: iio: proximity: as3935: remove triggered buffer processing Triggered buffers shouldn't return processed data, and the respective conversion was overflowing the defined .realbits for the channel. Cc: george.mccollister@gmail.com Signed-off-by: Matt Ranostay Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/as3935.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index f0a0defb68a4..6aed02437efc 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -213,7 +213,6 @@ static irqreturn_t as3935_trigger_handler(int irq, void *private) if (ret) goto err_read; val &= AS3935_DATA_MASK; - val *= 1000; iio_push_to_buffers_with_timestamp(indio_dev, &val, pf->timestamp); err_read: -- cgit v1.2.3 From 37b1ba2c68cfbe37f5f45bb91bcfaf2b016ae6a1 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Sat, 21 May 2016 20:01:03 -0700 Subject: iio: proximity: as3935: fix buffer stack trashing Buffer wasn't of a valid size to allow the timestamp, and correct padding. This patchset also moves the buffer off the stack, and onto the heap. Cc: george.mccollister@gmail.com Signed-off-by: Matt Ranostay Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/as3935.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index 6aed02437efc..e2f926cdcad2 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -64,6 +64,7 @@ struct as3935_state { struct delayed_work work; u32 tune_cap; + u8 buffer[16]; /* 8-bit data + 56-bit padding + 64-bit timestamp */ u8 buf[2] ____cacheline_aligned; }; @@ -212,9 +213,10 @@ static irqreturn_t as3935_trigger_handler(int irq, void *private) ret = as3935_read(st, AS3935_DATA, &val); if (ret) goto err_read; - val &= AS3935_DATA_MASK; - iio_push_to_buffers_with_timestamp(indio_dev, &val, pf->timestamp); + st->buffer[0] = val & AS3935_DATA_MASK; + iio_push_to_buffers_with_timestamp(indio_dev, &st->buffer, + pf->timestamp); err_read: iio_trigger_notify_done(indio_dev->trig); -- cgit v1.2.3 From e9bc15f28e5f0db44aba609780d6850eabefbf11 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2016 10:45:44 +0100 Subject: s390/config: update default configuration Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/configs/default_defconfig | 44 ++++++++++++++++++++++----------- arch/s390/configs/gcov_defconfig | 34 ++++++++++++++----------- arch/s390/configs/performance_defconfig | 36 ++++++++++++++++----------- arch/s390/configs/zfcpdump_defconfig | 4 +-- arch/s390/defconfig | 44 +++++++++++++++++++-------------- 5 files changed, 98 insertions(+), 64 deletions(-) diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig index 0ac42cc4f880..d5ec71b2ed02 100644 --- a/arch/s390/configs/default_defconfig +++ b/arch/s390/configs/default_defconfig @@ -1,8 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_FHANDLE=y CONFIG_AUDIT=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y @@ -13,19 +12,19 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NUMA_BALANCING=y -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_PIDS=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CPUSETS=y -CONFIG_CGROUP_CPUACCT=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y -CONFIG_MEMCG_KMEM=y -CONFIG_CGROUP_HUGETLB=y -CONFIG_CGROUP_PERF=y +CONFIG_BLK_CGROUP=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y -CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_SCHED_AUTOGROUP=y @@ -55,7 +54,6 @@ CONFIG_UNIXWARE_DISKLABEL=y CONFIG_CFQ_GROUP_IOSCHED=y CONFIG_DEFAULT_DEADLINE=y CONFIG_LIVEPATCH=y -CONFIG_MARCH_Z196=y CONFIG_TUNE_ZEC12=y CONFIG_NR_CPUS=256 CONFIG_NUMA=y @@ -65,6 +63,15 @@ CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +CONFIG_MEM_SOFT_DIRTY=y +CONFIG_ZPOOL=m +CONFIG_ZBUD=m +CONFIG_ZSMALLOC=m +CONFIG_ZSMALLOC_STAT=y +CONFIG_IDLE_PAGE_TRACKING=y CONFIG_PCI=y CONFIG_PCI_DEBUG=y CONFIG_HOTPLUG_PCI=y @@ -452,6 +459,7 @@ CONFIG_HW_RANDOM_VIRTIO=m CONFIG_RAW_DRIVER=m CONFIG_HANGCHECK_TIMER=m CONFIG_TN3270_FS=y +# CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_SOFT_WATCHDOG=m @@ -537,6 +545,8 @@ CONFIG_DLM=m CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_GDB_SCRIPTS=y CONFIG_FRAME_WARN=1024 CONFIG_READABLE_ASM=y CONFIG_UNUSED_SYMBOLS=y @@ -555,13 +565,17 @@ CONFIG_SLUB_DEBUG_ON=y CONFIG_SLUB_STATS=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUG_VM=y +CONFIG_DEBUG_VM_VMACACHE=y CONFIG_DEBUG_VM_RB=y +CONFIG_DEBUG_VM_PGFLAGS=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m CONFIG_DEBUG_PER_CPU_MAPS=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y +CONFIG_WQ_WATCHDOG=y CONFIG_PANIC_ON_OOPS=y +CONFIG_DEBUG_TIMEKEEPING=y CONFIG_TIMER_STATS=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y @@ -596,6 +610,8 @@ CONFIG_FTRACE_SYSCALLS=y CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_UPROBE_EVENT=y +CONFIG_FUNCTION_PROFILER=y +CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_LKDTM=m CONFIG_TEST_LIST_SORT=y CONFIG_KPROBES_SANITY_TEST=y @@ -607,7 +623,6 @@ CONFIG_TEST_STRING_HELPERS=y CONFIG_TEST_KSTRTOX=y CONFIG_DMA_API_DEBUG=y CONFIG_TEST_BPF=m -# CONFIG_STRICT_DEVMEM is not set CONFIG_S390_PTDUMP=y CONFIG_ENCRYPTED_KEYS=m CONFIG_SECURITY=y @@ -651,7 +666,6 @@ CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_ZLIB=y CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m @@ -664,7 +678,7 @@ CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m -CONFIG_ASYMMETRIC_KEY_TYPE=m +CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m CONFIG_X509_CERTIFICATE_PARSER=m CONFIG_CRC7=m diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig index a31dcd56f7c0..f46a35115d2d 100644 --- a/arch/s390/configs/gcov_defconfig +++ b/arch/s390/configs/gcov_defconfig @@ -1,8 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_FHANDLE=y CONFIG_AUDIT=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y @@ -13,17 +12,17 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NUMA_BALANCING=y -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_PIDS=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CPUSETS=y -CONFIG_CGROUP_CPUACCT=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y -CONFIG_MEMCG_KMEM=y +CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y -CONFIG_BLK_CGROUP=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_SCHED_AUTOGROUP=y @@ -53,7 +52,6 @@ CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_CFQ_GROUP_IOSCHED=y CONFIG_DEFAULT_DEADLINE=y -CONFIG_MARCH_Z196=y CONFIG_TUNE_ZEC12=y CONFIG_NR_CPUS=256 CONFIG_NUMA=y @@ -62,6 +60,14 @@ CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +CONFIG_ZSWAP=y +CONFIG_ZBUD=m +CONFIG_ZSMALLOC=m +CONFIG_ZSMALLOC_STAT=y +CONFIG_IDLE_PAGE_TRACKING=y CONFIG_PCI=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_S390=y @@ -530,6 +536,8 @@ CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_GDB_SCRIPTS=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_UNUSED_SYMBOLS=y @@ -547,13 +555,13 @@ CONFIG_LATENCYTOP=y CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_KPROBE_EVENT is not set +CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_LKDTM=m CONFIG_RBTREE_TEST=m CONFIG_INTERVAL_TREE_TEST=m CONFIG_PERCPU_TEST=m CONFIG_ATOMIC64_SELFTEST=y CONFIG_TEST_BPF=m -# CONFIG_STRICT_DEVMEM is not set CONFIG_S390_PTDUMP=y CONFIG_ENCRYPTED_KEYS=m CONFIG_SECURITY=y @@ -597,8 +605,6 @@ CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_ZLIB=y -CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m CONFIG_CRYPTO_USER_API_HASH=m @@ -610,7 +616,7 @@ CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m -CONFIG_ASYMMETRIC_KEY_TYPE=m +CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m CONFIG_X509_CERTIFICATE_PARSER=m CONFIG_CRC7=m diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig index 7b73bf353345..ba0f2a58b8cd 100644 --- a/arch/s390/configs/performance_defconfig +++ b/arch/s390/configs/performance_defconfig @@ -1,8 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_FHANDLE=y CONFIG_AUDIT=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y @@ -14,17 +13,17 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NUMA_BALANCING=y # CONFIG_NUMA_BALANCING_DEFAULT_ENABLED is not set -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_PIDS=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CPUSETS=y -CONFIG_CGROUP_CPUACCT=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y -CONFIG_MEMCG_KMEM=y +CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y -CONFIG_BLK_CGROUP=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_SCHED_AUTOGROUP=y @@ -53,7 +52,6 @@ CONFIG_UNIXWARE_DISKLABEL=y CONFIG_CFQ_GROUP_IOSCHED=y CONFIG_DEFAULT_DEADLINE=y CONFIG_LIVEPATCH=y -CONFIG_MARCH_Z196=y CONFIG_TUNE_ZEC12=y CONFIG_NR_CPUS=512 CONFIG_NUMA=y @@ -62,6 +60,14 @@ CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +CONFIG_ZSWAP=y +CONFIG_ZBUD=m +CONFIG_ZSMALLOC=m +CONFIG_ZSMALLOC_STAT=y +CONFIG_IDLE_PAGE_TRACKING=y CONFIG_PCI=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_S390=y @@ -447,6 +453,7 @@ CONFIG_HW_RANDOM_VIRTIO=m CONFIG_RAW_DRIVER=m CONFIG_HANGCHECK_TIMER=m CONFIG_TN3270_FS=y +# CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_SOFT_WATCHDOG=m @@ -530,6 +537,8 @@ CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_GDB_SCRIPTS=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_UNUSED_SYMBOLS=y @@ -546,11 +555,12 @@ CONFIG_FTRACE_SYSCALLS=y CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_UPROBE_EVENT=y +CONFIG_FUNCTION_PROFILER=y +CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_LKDTM=m CONFIG_PERCPU_TEST=m CONFIG_ATOMIC64_SELFTEST=y CONFIG_TEST_BPF=m -# CONFIG_STRICT_DEVMEM is not set CONFIG_S390_PTDUMP=y CONFIG_ENCRYPTED_KEYS=m CONFIG_SECURITY=y @@ -594,8 +604,6 @@ CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_ZLIB=y -CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m CONFIG_CRYPTO_USER_API_HASH=m @@ -607,7 +615,7 @@ CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m -CONFIG_ASYMMETRIC_KEY_TYPE=m +CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m CONFIG_X509_CERTIFICATE_PARSER=m CONFIG_CRC7=m diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig index 1719843a55a2..4366a3e3e754 100644 --- a/arch/s390/configs/zfcpdump_defconfig +++ b/arch/s390/configs/zfcpdump_defconfig @@ -1,5 +1,5 @@ # CONFIG_SWAP is not set -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -7,7 +7,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y CONFIG_DEFAULT_DEADLINE=y -CONFIG_MARCH_Z196=y CONFIG_TUNE_ZEC12=y # CONFIG_COMPAT is not set CONFIG_NR_CPUS=2 @@ -64,7 +63,6 @@ CONFIG_PANIC_ON_OOPS=y # CONFIG_SCHED_DEBUG is not set CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_FTRACE is not set -# CONFIG_STRICT_DEVMEM is not set # CONFIG_PFAULT is not set # CONFIG_S390_HYPFS_FS is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/s390/defconfig b/arch/s390/defconfig index e24f2af4c73b..3f571ea89509 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,8 +1,8 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_FHANDLE=y +CONFIG_USELIB=y CONFIG_AUDIT=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y @@ -11,19 +11,19 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_PIDS=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CPUSETS=y -CONFIG_CGROUP_CPUACCT=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y -CONFIG_MEMCG_KMEM=y -CONFIG_CGROUP_HUGETLB=y -CONFIG_CGROUP_PERF=y +CONFIG_BLK_CGROUP=y CONFIG_CGROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y -CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_BLK_DEV_INITRD=y @@ -44,7 +44,6 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y CONFIG_DEFAULT_DEADLINE=y CONFIG_LIVEPATCH=y -CONFIG_MARCH_Z196=y CONFIG_NR_CPUS=256 CONFIG_NUMA=y CONFIG_HZ_100=y @@ -52,6 +51,14 @@ CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +CONFIG_ZSWAP=y +CONFIG_ZBUD=m +CONFIG_ZSMALLOC=m +CONFIG_ZSMALLOC_STAT=y +CONFIG_IDLE_PAGE_TRACKING=y CONFIG_CRASH_DUMP=y CONFIG_BINFMT_MISC=m CONFIG_HIBERNATION=y @@ -61,7 +68,6 @@ CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_IP_MULTICAST=y -# CONFIG_INET_LRO is not set CONFIG_L2TP=m CONFIG_L2TP_DEBUGFS=m CONFIG_VLAN_8021Q=y @@ -144,6 +150,9 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y # CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_GDB_SCRIPTS=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y @@ -158,20 +167,21 @@ CONFIG_LOCK_STAT=y CONFIG_DEBUG_LOCKDEP=y CONFIG_DEBUG_ATOMIC_SLEEP=y CONFIG_DEBUG_LIST=y -CONFIG_DEBUG_PI_LIST=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_NOTIFIERS=y CONFIG_RCU_CPU_STALL_TIMEOUT=60 CONFIG_RCU_TRACE=y CONFIG_LATENCYTOP=y CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y -CONFIG_TRACER_SNAPSHOT=y +CONFIG_SCHED_TRACER=y +CONFIG_FTRACE_SYSCALLS=y CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_UPROBE_EVENT=y +CONFIG_FUNCTION_PROFILER=y +CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_KPROBES_SANITY_TEST=y -# CONFIG_STRICT_DEVMEM is not set CONFIG_S390_PTDUMP=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m @@ -212,8 +222,6 @@ CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_ZLIB=m -CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m CONFIG_CRYPTO_ANSI_CPRNG=m -- cgit v1.2.3 From cf0d44d513f275be9ce42158079d4257e8973889 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Mon, 23 May 2016 15:35:51 +0200 Subject: s390: fix info leak in do_sigsegv Aleksa has reported incorrect si_errno value when stracing task which received SIGSEGV: [pid 20799] --- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_errno=2510266, si_addr=0x100000000000000} The reason seems to be that do_sigsegv is not initializing siginfo structure defined on the stack completely so it will leak 4B of the previous stack content. Fix it simply by initializing si_errno to 0 (same as do_sigbus does already). Cc: stable # introduced pre-git times Reported-by: Aleksa Sarai Signed-off-by: Michal Hocko Signed-off-by: Martin Schwidefsky --- arch/s390/mm/fault.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 7a3144017301..19288c1b36d3 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -250,6 +250,7 @@ static noinline void do_sigsegv(struct pt_regs *regs, int si_code) report_user_fault(regs, SIGSEGV, 1); si.si_signo = SIGSEGV; + si.si_errno = 0; si.si_code = si_code; si.si_addr = (void __user *)(regs->int_parm_long & __FAIL_ADDR_MASK); force_sig_info(SIGSEGV, &si, current); -- cgit v1.2.3 From bbf178e0a0a323d896611905718db112b1ab1807 Mon Sep 17 00:00:00 2001 From: "xypron.glpk@gmx.de" Date: Wed, 18 May 2016 20:40:51 +0200 Subject: net: pegasus: simplify logical constraint If !count is true, count < 4 is also true. Signed-off-by: Heinrich Schuchardt Signed-off-by: David S. Miller --- drivers/net/usb/pegasus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 36cd7f016a8d..9bbe0161a2f4 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -473,7 +473,7 @@ static void read_bulk_callback(struct urb *urb) goto goon; } - if (!count || count < 4) + if (count < 4) goto goon; rx_status = buf[count - 2]; -- cgit v1.2.3 From c685293aa379b9d17e44fcc2f96a402b7648e838 Mon Sep 17 00:00:00 2001 From: Stefan Hajnoczi Date: Wed, 18 May 2016 17:42:13 -0700 Subject: net/atm: sk_err_soft must be positive The sk_err and sk_err_soft fields are positive errno values and userspace applications rely on this when using getsockopt(SO_ERROR). ATM code places an -errno into sk_err_soft in sigd_send() and returns it from svc_addparty()/svc_dropparty(). Although I am not familiar with ATM code I came to this conclusion because: 1. sigd_send() msg->type cases as_okay and as_error both have: sk->sk_err = -msg->reply; while the as_addparty and as_dropparty cases have: sk->sk_err_soft = msg->reply; This is the source of the inconsistency. 2. svc_addparty() returns an -errno and assumes sk_err_soft is also an -errno: if (flags & O_NONBLOCK) { error = -EINPROGRESS; goto out; } ... error = xchg(&sk->sk_err_soft, 0); out: release_sock(sk); return error; This shows that sk_err_soft is indeed being treated as an -errno. This patch ensures that sk_err_soft is always a positive errno. Signed-off-by: Stefan Hajnoczi Signed-off-by: David S. Miller --- net/atm/signaling.c | 2 +- net/atm/svc.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/net/atm/signaling.c b/net/atm/signaling.c index 4fd6af47383a..adb6e3d21b1e 100644 --- a/net/atm/signaling.c +++ b/net/atm/signaling.c @@ -124,7 +124,7 @@ as_indicate_complete: break; case as_addparty: case as_dropparty: - sk->sk_err_soft = msg->reply; + sk->sk_err_soft = -msg->reply; /* < 0 failure, otherwise ep_ref */ clear_bit(ATM_VF_WAITING, &vcc->flags); break; diff --git a/net/atm/svc.c b/net/atm/svc.c index 3fa0a9ee98d1..878563a8354d 100644 --- a/net/atm/svc.c +++ b/net/atm/svc.c @@ -546,7 +546,7 @@ static int svc_addparty(struct socket *sock, struct sockaddr *sockaddr, schedule(); } finish_wait(sk_sleep(sk), &wait); - error = xchg(&sk->sk_err_soft, 0); + error = -xchg(&sk->sk_err_soft, 0); out: release_sock(sk); return error; @@ -573,7 +573,7 @@ static int svc_dropparty(struct socket *sock, int ep_ref) error = -EUNATCH; goto out; } - error = xchg(&sk->sk_err_soft, 0); + error = -xchg(&sk->sk_err_soft, 0); out: release_sock(sk); return error; -- cgit v1.2.3 From 8da07a393f48864a87c61bb1dfbee640d9b97fd6 Mon Sep 17 00:00:00 2001 From: "xypron.glpk@gmx.de" Date: Thu, 19 May 2016 21:20:55 +0200 Subject: net: hns: avoid null pointer dereference In the statement assert(priv || priv->ae_handle); the right side of || is only evaluated if priv is null. v2: As suggested by David Leight and David Miller the assert statements are removed. Signed-off-by: Heinrich Schuchardt Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c index 3d746c887873..67a648c7d3a9 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c @@ -46,7 +46,6 @@ static u32 hns_nic_get_link(struct net_device *net_dev) u32 link_stat = priv->link; struct hnae_handle *h; - assert(priv && priv->ae_handle); h = priv->ae_handle; if (priv->phy) { @@ -646,8 +645,6 @@ static void hns_nic_get_drvinfo(struct net_device *net_dev, { struct hns_nic_priv *priv = netdev_priv(net_dev); - assert(priv); - strncpy(drvinfo->version, HNAE_DRIVER_VERSION, sizeof(drvinfo->version)); drvinfo->version[sizeof(drvinfo->version) - 1] = '\0'; @@ -720,8 +717,6 @@ static int hns_set_pauseparam(struct net_device *net_dev, struct hnae_handle *h; struct hnae_ae_ops *ops; - assert(priv || priv->ae_handle); - h = priv->ae_handle; ops = h->dev->ops; @@ -780,8 +775,6 @@ static int hns_set_coalesce(struct net_device *net_dev, struct hnae_ae_ops *ops; int ret; - assert(priv || priv->ae_handle); - ops = priv->ae_handle->dev->ops; if (ec->tx_coalesce_usecs != ec->rx_coalesce_usecs) @@ -1111,8 +1104,6 @@ void hns_get_regs(struct net_device *net_dev, struct ethtool_regs *cmd, struct hns_nic_priv *priv = netdev_priv(net_dev); struct hnae_ae_ops *ops; - assert(priv || priv->ae_handle); - ops = priv->ae_handle->dev->ops; cmd->version = HNS_CHIP_VERSION; @@ -1135,8 +1126,6 @@ static int hns_get_regs_len(struct net_device *net_dev) struct hns_nic_priv *priv = netdev_priv(net_dev); struct hnae_ae_ops *ops; - assert(priv || priv->ae_handle); - ops = priv->ae_handle->dev->ops; if (!ops->get_regs_len) { netdev_err(net_dev, "ops->get_regs_len is null!\n"); -- cgit v1.2.3 From 2ece068e1b1d6e76ecd07e04b027013e931287ff Mon Sep 17 00:00:00 2001 From: Muhammad Falak R Wani Date: Fri, 20 May 2016 17:51:02 +0530 Subject: ptp: use memdup_user(). Use memdup_user to duplicate a memory region from user-space to kernel-space, instead of open coding using kmalloc & copy_from_user. Signed-off-by: Muhammad Falak R Wani Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/ptp/ptp_chardev.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c index 579fd65299a0..0b1ac6be69ce 100644 --- a/drivers/ptp/ptp_chardev.c +++ b/drivers/ptp/ptp_chardev.c @@ -208,14 +208,9 @@ long ptp_ioctl(struct posix_clock *pc, unsigned int cmd, unsigned long arg) break; case PTP_SYS_OFFSET: - sysoff = kmalloc(sizeof(*sysoff), GFP_KERNEL); - if (!sysoff) { - err = -ENOMEM; - break; - } - if (copy_from_user(sysoff, (void __user *)arg, - sizeof(*sysoff))) { - err = -EFAULT; + sysoff = memdup_user((void __user *)arg, sizeof(*sysoff)); + if (IS_ERR(sysoff)) { + err = PTR_ERR(sysoff); break; } if (sysoff->n_samples > PTP_MAX_SAMPLES) { -- cgit v1.2.3 From 049bbf589ec651685205bd8ce73221fdd62345cf Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Fri, 20 May 2016 13:21:10 -0300 Subject: ipv4: Fix non-initialized TTL when CONFIG_SYSCTL=n Commit fa50d974d104 ("ipv4: Namespaceify ip_default_ttl sysctl knob") moves the default TTL assignment, and as side-effect IPv4 TTL now has a default value only if sysctl support is enabled (CONFIG_SYSCTL=y). The sysctl_ip_default_ttl is fundamental for IP to work properly, as it provides the TTL to be used as default. The defautl TTL may be used in ip_selected_ttl, through the following flow: ip_select_ttl ip4_dst_hoplimit net->ipv4.sysctl_ip_default_ttl This commit fixes the issue by assigning net->ipv4.sysctl_ip_default_ttl in net_init_net, called during ipv4's initialization. Without this commit, a kernel built without sysctl support will send all IP packets with zero TTL (unless a TTL is explicitly set, e.g. with setsockopt). Given a similar issue might appear on the other knobs that were namespaceify, this commit also moves them. Fixes: fa50d974d104 ("ipv4: Namespaceify ip_default_ttl sysctl knob") Signed-off-by: Ezequiel Garcia Signed-off-by: David S. Miller --- net/ipv4/af_inet.c | 8 ++++++++ net/ipv4/sysctl_net_ipv4.c | 4 ---- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 377424ea17a4..d39e9e47a26e 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1681,6 +1681,14 @@ static __net_init int inet_init_net(struct net *net) */ net->ipv4.ping_group_range.range[0] = make_kgid(&init_user_ns, 1); net->ipv4.ping_group_range.range[1] = make_kgid(&init_user_ns, 0); + + /* Default values for sysctl-controlled parameters. + * We set them here, in case sysctl is not compiled. + */ + net->ipv4.sysctl_ip_default_ttl = IPDEFTTL; + net->ipv4.sysctl_ip_dynaddr = 0; + net->ipv4.sysctl_ip_early_demux = 1; + return 0; } diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index bb0419582b8d..1cb67de106fe 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -999,10 +999,6 @@ static __net_init int ipv4_sysctl_init_net(struct net *net) if (!net->ipv4.sysctl_local_reserved_ports) goto err_ports; - net->ipv4.sysctl_ip_default_ttl = IPDEFTTL; - net->ipv4.sysctl_ip_dynaddr = 0; - net->ipv4.sysctl_ip_early_demux = 1; - return 0; err_ports: -- cgit v1.2.3 From 156f4fbcc2bd1ce38da483f932d3963ba9a79ad0 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 22 May 2016 11:06:09 +0200 Subject: MAINTAINERS: Add file patterns for net device tree bindings Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven Cc: David S. Miller Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 5f83015ff016..8d397157981c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7832,6 +7832,7 @@ Q: http://patchwork.ozlabs.org/project/netdev/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git S: Odd Fixes +F: Documentation/devicetree/bindings/net/ F: drivers/net/ F: include/linux/if_* F: include/linux/netdevice.h -- cgit v1.2.3 From 612bacad78ba6d0a91166fc4487af114bac172a8 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Sun, 22 May 2016 23:16:18 +0200 Subject: bpf, inode: disallow userns mounts Follow-up to commit e27f4a942a0e ("bpf: Use mount_nodev not mount_ns to mount the bpf filesystem"), which removes the FS_USERNS_MOUNT flag. The original idea was to have a per mountns instance instead of a single global fs instance, but that didn't work out and we had to switch to mount_nodev() model. The intent of that middle ground was that we avoid users who don't play nice to create endless instances of bpf fs which are difficult to control and discover from an admin point of view, but at the same time it would have allowed us to be more flexible with regard to namespaces. Therefore, since we now did the switch to mount_nodev() as a fix where individual instances are created, we also need to remove userns mount flag along with it to avoid running into mentioned situation. I don't expect any breakage at this early point in time with removing the flag and we can revisit this later should the requirement for this come up with future users. This and commit e27f4a942a0e have been split to facilitate tracking should any of them run into the unlikely case of causing a regression. Fixes: b2197755b263 ("bpf: add support for persistent maps/progs") Signed-off-by: Daniel Borkmann Acked-by: Hannes Frederic Sowa Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- kernel/bpf/inode.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/bpf/inode.c b/kernel/bpf/inode.c index 04be7021f848..318858edb1cd 100644 --- a/kernel/bpf/inode.c +++ b/kernel/bpf/inode.c @@ -365,7 +365,6 @@ static struct file_system_type bpf_fs_type = { .name = "bpf", .mount = bpf_mount, .kill_sb = kill_litter_super, - .fs_flags = FS_USERNS_MOUNT, }; MODULE_ALIAS_FS("bpf"); -- cgit v1.2.3 From 54b9430f04b0be3beb7f2711152c61e7d39c58e5 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 23 May 2016 13:19:35 +0300 Subject: qed: signedness bug in qed_dcbx_process_tlv() "priority" needs to be signed for the error handling to work. Fixes: 39651abd2814 ('qed: add support for dcbx.') Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index cbf58e1f9333..a06d19a698b2 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -192,9 +192,10 @@ qed_dcbx_process_tlv(struct qed_hwfn *p_hwfn, struct dcbx_app_priority_entry *p_tbl, u32 pri_tc_tbl, int count, bool dcbx_enabled) { - u8 tc, priority, priority_map; + u8 tc, priority_map; enum dcbx_protocol_type type; u16 protocol_id; + int priority; bool enable; int i; -- cgit v1.2.3 From 59fa5860204ffc95128d60cba9f54f9740a42c7d Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Tue, 24 May 2016 11:42:30 +0100 Subject: genirq: Fix missing return value in irq_destroy_ipi() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 7cec18a3906b changed the return type of irq_destroy_ipi to int, but missed adding a value to one return statement. Fix this to silence the resulting compiler warning: kernel/irq/ipi.c In function ‘irq_destroy_ipi’: kernel/irq/ipi.c:128:3: warning: ‘return’ with no value, in function returning non-void [-Wreturn-type] Fixes: 7cec18a3906b "genirq: Add error code reporting to irq_{reserve,destroy}_ipi" Signed-off-by: Matt Redfearn Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/1464086550-24734-1-git-send-email-matt.redfearn@imgtec.com Signed-off-by: Thomas Gleixner --- kernel/irq/ipi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/irq/ipi.c b/kernel/irq/ipi.c index c42742208e5e..89b49f6773f0 100644 --- a/kernel/irq/ipi.c +++ b/kernel/irq/ipi.c @@ -125,7 +125,7 @@ int irq_destroy_ipi(unsigned int irq, const struct cpumask *dest) domain = data->domain; if (WARN_ON(domain == NULL)) - return; + return -EINVAL; if (!irq_domain_is_ipi(domain)) { pr_warn("Trying to destroy a non IPI domain!\n"); -- cgit v1.2.3 From 1b227e536662eae4b7beee3037edbecdc577495f Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Sat, 21 May 2016 18:17:34 +0800 Subject: ip6_gre: Fix MTU setting for ip6gretap When creat an ip6gretap interface with an unreachable route, the MTU is about 14 bytes larger than what was needed. If the remote address is reachable: ping6 2001:0:130::1 -c 2 PING 2001:0:130::1(2001:0:130::1) 56 data bytes 64 bytes from 2001:0:130::1: icmp_seq=1 ttl=64 time=1.46 ms 64 bytes from 2001:0:130::1: icmp_seq=2 ttl=64 time=81.1 ms Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index af503f518278..a6fe3397728c 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -1027,6 +1027,8 @@ static int ip6gre_tunnel_init_common(struct net_device *dev) dev->hard_header_len = LL_MAX_HEADER + t_hlen; dev->mtu = ETH_DATA_LEN - t_hlen; + if (dev->type == ARPHRD_ETHER) + dev->mtu -= ETH_HLEN; if (!(tunnel->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT)) dev->mtu -= 8; -- cgit v1.2.3 From 252f3f5a1189a7f6c309d8e4ff1c4c1888a27f13 Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Sat, 21 May 2016 18:17:35 +0800 Subject: ip6_gre: Set flowi6_proto as IPPROTO_GRE in xmit path. In gre6 xmit path, we are sending a GRE packet, so set fl6 proto to IPPROTO_GRE properly. Signed-off-by: Haishuang Yan Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index a6fe3397728c..f4ac2842d4d9 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -712,6 +712,7 @@ static void ip6gre_tnl_link_config(struct ip6_tnl *t, int set_mtu) fl6->daddr = p->raddr; fl6->flowi6_oif = p->link; fl6->flowlabel = 0; + fl6->flowi6_proto = IPPROTO_GRE; if (!(p->flags&IP6_TNL_F_USE_ORIG_TCLASS)) fl6->flowlabel |= IPV6_TCLASS_MASK & p->flowinfo; -- cgit v1.2.3 From 3275c0c6c522ab04afa14f80efdac6213c3883d6 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Mon, 23 May 2016 11:58:28 +1000 Subject: net/qlge: Avoids recursive EEH error One timer, whose handler keeps reading on MMIO register for EEH core to detect error in time, is started when the PCI device driver is loaded. MMIO register can't be accessed during PE reset in EEH recovery. Otherwise, the unexpected recursive error is triggered. The timer isn't closed that time if the interface isn't brought up. So the unexpected recursive error is seen during EEH recovery when the interface is down. This avoids the unexpected recursive EEH error by closing the timer in qlge_io_error_detected() before EEH PE reset unconditionally. The timer is started unconditionally after EEH PE reset in qlge_io_resume(). Also, the timer should be closed unconditionally when the device is removed from the system permanently in qlge_io_error_detected(). Reported-by: Shriya R. Kulkarni Signed-off-by: Gavin Shan Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlge/qlge_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index 83d72106471c..fd5d1c93b55b 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -4846,7 +4846,6 @@ static void ql_eeh_close(struct net_device *ndev) } /* Disabling the timer */ - del_timer_sync(&qdev->timer); ql_cancel_all_work_sync(qdev); for (i = 0; i < qdev->rss_ring_count; i++) @@ -4873,6 +4872,7 @@ static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev, return PCI_ERS_RESULT_CAN_RECOVER; case pci_channel_io_frozen: netif_device_detach(ndev); + del_timer_sync(&qdev->timer); if (netif_running(ndev)) ql_eeh_close(ndev); pci_disable_device(pdev); @@ -4880,6 +4880,7 @@ static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev, case pci_channel_io_perm_failure: dev_err(&pdev->dev, "%s: pci_channel_io_perm_failure.\n", __func__); + del_timer_sync(&qdev->timer); ql_eeh_close(ndev); set_bit(QL_EEH_FATAL, &qdev->flags); return PCI_ERS_RESULT_DISCONNECT; -- cgit v1.2.3 From a9efad8b24bd22616f6c749a6c029957dc76542b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 23 May 2016 14:24:56 -0700 Subject: net_sched: avoid too many hrtimer_start() calls I found a serious performance bug in packet schedulers using hrtimers. sch_htb and sch_fq are definitely impacted by this problem. We constantly rearm high resolution timers if some packets are throttled in one (or more) class, and other packets are flying through qdisc on another (non throttled) class. hrtimer_start() does not have the mod_timer() trick of doing nothing if expires value does not change : if (timer_pending(timer) && timer->expires == expires) return 1; This issue is particularly visible when multiple cpus can queue/dequeue packets on the same qdisc, as hrtimer code has to lock a remote base. I used following fix : 1) Change htb to use qdisc_watchdog_schedule_ns() instead of open-coding it. 2) Cache watchdog prior expiration. hrtimer might provide this, but I prefer to not rely on some hrtimer internal. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/pkt_sched.h | 1 + net/sched/sch_api.c | 4 ++++ net/sched/sch_htb.c | 13 +++---------- 3 files changed, 8 insertions(+), 10 deletions(-) diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h index 401038d2f9b8..fea53f4d92ca 100644 --- a/include/net/pkt_sched.h +++ b/include/net/pkt_sched.h @@ -61,6 +61,7 @@ psched_tdiff_bounded(psched_time_t tv1, psched_time_t tv2, psched_time_t bound) } struct qdisc_watchdog { + u64 last_expires; struct hrtimer timer; struct Qdisc *qdisc; }; diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 64f71a2155f3..ddf047df5361 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -607,6 +607,10 @@ void qdisc_watchdog_schedule_ns(struct qdisc_watchdog *wd, u64 expires, bool thr if (throttle) qdisc_throttled(wd->qdisc); + if (wd->last_expires == expires) + return; + + wd->last_expires = expires; hrtimer_start(&wd->timer, ns_to_ktime(expires), HRTIMER_MODE_ABS_PINNED); diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index f6bf5818ed4d..d4b4218af6b1 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -928,17 +928,10 @@ ok: } } qdisc_qstats_overlimit(sch); - if (likely(next_event > q->now)) { - if (!test_bit(__QDISC_STATE_DEACTIVATED, - &qdisc_root_sleeping(q->watchdog.qdisc)->state)) { - ktime_t time = ns_to_ktime(next_event); - qdisc_throttled(q->watchdog.qdisc); - hrtimer_start(&q->watchdog.timer, time, - HRTIMER_MODE_ABS_PINNED); - } - } else { + if (likely(next_event > q->now)) + qdisc_watchdog_schedule_ns(&q->watchdog, next_event, true); + else schedule_work(&q->work); - } fin: return skb; } -- cgit v1.2.3 From 3d3ed18151172c845a11b7c184f2120220ae19fc Mon Sep 17 00:00:00 2001 From: Jamal Hadi Salim Date: Mon, 23 May 2016 21:07:20 -0400 Subject: net sched actions: policer missing timestamp processing Policer was not dumping or updating timestamps Signed-off-by: Jamal Hadi Salim Acked-by: Cong Wang Signed-off-by: David S. Miller --- include/uapi/linux/pkt_cls.h | 4 +++- net/sched/act_police.c | 11 +++++++++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index eba5914ba5d1..f4297c8a42fe 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -145,6 +145,8 @@ enum { TCA_POLICE_PEAKRATE, TCA_POLICE_AVRATE, TCA_POLICE_RESULT, + TCA_POLICE_TM, + TCA_POLICE_PAD, __TCA_POLICE_MAX #define TCA_POLICE_RESULT TCA_POLICE_RESULT }; @@ -173,7 +175,7 @@ enum { TCA_U32_DIVISOR, TCA_U32_SEL, TCA_U32_POLICE, - TCA_U32_ACT, + TCA_U32_ACT, TCA_U32_INDEV, TCA_U32_PCNT, TCA_U32_MARK, diff --git a/net/sched/act_police.c b/net/sched/act_police.c index 330f14e302e8..b884dae692a1 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -239,6 +239,8 @@ override: police->tcfp_t_c = ktime_get_ns(); police->tcf_index = parm->index ? parm->index : tcf_hash_new_index(tn); + police->tcf_tm.install = jiffies; + police->tcf_tm.lastuse = jiffies; h = tcf_hash(police->tcf_index, POL_TAB_MASK); spin_lock_bh(&hinfo->lock); hlist_add_head(&police->tcf_head, &hinfo->htab[h]); @@ -268,6 +270,7 @@ static int tcf_act_police(struct sk_buff *skb, const struct tc_action *a, spin_lock(&police->tcf_lock); bstats_update(&police->tcf_bstats, skb); + tcf_lastuse_update(&police->tcf_tm); if (police->tcfp_ewma_rate && police->tcf_rate_est.bps >= police->tcfp_ewma_rate) { @@ -327,6 +330,7 @@ tcf_act_police_dump(struct sk_buff *skb, struct tc_action *a, int bind, int ref) .refcnt = police->tcf_refcnt - ref, .bindcnt = police->tcf_bindcnt - bind, }; + struct tcf_t t; if (police->rate_present) psched_ratecfg_getrate(&opt.rate, &police->rate); @@ -340,6 +344,13 @@ tcf_act_police_dump(struct sk_buff *skb, struct tc_action *a, int bind, int ref) if (police->tcfp_ewma_rate && nla_put_u32(skb, TCA_POLICE_AVRATE, police->tcfp_ewma_rate)) goto nla_put_failure; + + t.install = jiffies_to_clock_t(jiffies - police->tcf_tm.install); + t.lastuse = jiffies_to_clock_t(jiffies - police->tcf_tm.lastuse); + t.expires = jiffies_to_clock_t(police->tcf_tm.expires); + if (nla_put_64bit(skb, TCA_POLICE_TM, sizeof(t), &t, TCA_POLICE_PAD)) + goto nla_put_failure; + return skb->len; nla_put_failure: -- cgit v1.2.3 From 275ae411e56f8f900fa364da29c4706f9af4e1f3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= Date: Tue, 24 May 2016 16:53:49 +0200 Subject: perf/x86/intel/rapl: Fix pmus free during cleanup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On rapl cleanup path, kfree() is given by mistake the address of the pointer of the structure to free (rapl_pmus->pmus + i). Pass the pointer instead (rapl_pmus->pmus[i]). Fixes: 9de8d686955b "perf/x86/intel/rapl: Convert it to a per package facility" Signed-off-by: Vincent Stehlé Cc: Peter Zijlstra Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1464101629-14905-1-git-send-email-vincent.stehle@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/events/intel/rapl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/events/intel/rapl.c b/arch/x86/events/intel/rapl.c index 99c4bab123cd..e30eef4f29a6 100644 --- a/arch/x86/events/intel/rapl.c +++ b/arch/x86/events/intel/rapl.c @@ -714,7 +714,7 @@ static void cleanup_rapl_pmus(void) int i; for (i = 0; i < rapl_pmus->maxpkg; i++) - kfree(rapl_pmus->pmus + i); + kfree(rapl_pmus->pmus[i]); kfree(rapl_pmus); } -- cgit v1.2.3 From 720b287d8382616a29524dd98264ac1e3a069e9f Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 13 May 2016 22:48:51 +0200 Subject: netfilter: conntrack: remove leftover binary sysctl define Users got removed in f8572d8f2a2ba ("sysctl net: Remove unused binary sysctl code"). Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_standalone.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index 0f1a45bcacb2..2933db30098a 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -489,8 +489,6 @@ static struct ctl_table nf_ct_sysctl_table[] = { { } }; -#define NET_NF_CONNTRACK_MAX 2089 - static struct ctl_table nf_ct_netfilter_table[] = { { .procname = "nf_conntrack_max", -- cgit v1.2.3 From dc3ee32e96d74dd6c80eed63af5065cb75899299 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 13 May 2016 21:18:52 -0500 Subject: netfilter: nf_queue: Make the queue_handler pernet Florian Weber reported: > Under full load (unshare() in loop -> OOM conditions) we can > get kernel panic: > > BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 > IP: [] nfqnl_nf_hook_drop+0x35/0x70 > [..] > task: ffff88012dfa3840 ti: ffff88012dffc000 task.ti: ffff88012dffc000 > RIP: 0010:[] [] nfqnl_nf_hook_drop+0x35/0x70 > RSP: 0000:ffff88012dfffd80 EFLAGS: 00010206 > RAX: 0000000000000008 RBX: ffffffff81add0c0 RCX: ffff88013fd80000 > [..] > Call Trace: > [] nf_queue_nf_hook_drop+0x18/0x20 > [] nf_unregister_net_hook+0xdb/0x150 > [] netfilter_net_exit+0x2f/0x60 > [] ops_exit_list.isra.4+0x38/0x60 > [] setup_net+0xc2/0x120 > [] copy_net_ns+0x79/0x120 > [] create_new_namespaces+0x11b/0x1e0 > [] unshare_nsproxy_namespaces+0x57/0xa0 > [] SyS_unshare+0x1b2/0x340 > [] entry_SYSCALL_64_fastpath+0x1e/0xa8 > Code: 65 00 48 89 e5 41 56 41 55 41 54 53 83 e8 01 48 8b 97 70 12 00 00 48 98 49 89 f4 4c 8b 74 c2 18 4d 8d 6e 08 49 81 c6 88 00 00 00 <49> 8b 5d 00 48 85 db 74 1a 48 89 df 4c 89 e2 48 c7 c6 90 68 47 > The simple fix for this requires a new pernet variable for struct nf_queue that indicates when it is safe to use the dynamically allocated nf_queue state. As we need a variable anyway make nf_register_queue_handler and nf_unregister_queue_handler pernet. This allows the existing logic of when it is safe to use the state from the nfnetlink_queue module to be reused with no changes except for making it per net. The syncrhonize_rcu from nf_unregister_queue_handler is moved to a new function nfnl_queue_net_exit_batch so that the worst case of having a syncrhonize_rcu in the pernet exit path is not experienced in batch mode. Reported-by: Florian Westphal Signed-off-by: "Eric W. Biederman" Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_queue.h | 4 ++-- include/net/netns/netfilter.h | 2 ++ net/netfilter/nf_queue.c | 17 ++++++++--------- net/netfilter/nfnetlink_queue.c | 18 ++++++++++++------ 4 files changed, 24 insertions(+), 17 deletions(-) diff --git a/include/net/netfilter/nf_queue.h b/include/net/netfilter/nf_queue.h index 9c5638ad872e..0dbce55437f2 100644 --- a/include/net/netfilter/nf_queue.h +++ b/include/net/netfilter/nf_queue.h @@ -28,8 +28,8 @@ struct nf_queue_handler { struct nf_hook_ops *ops); }; -void nf_register_queue_handler(const struct nf_queue_handler *qh); -void nf_unregister_queue_handler(void); +void nf_register_queue_handler(struct net *net, const struct nf_queue_handler *qh); +void nf_unregister_queue_handler(struct net *net); void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict); void nf_queue_entry_get_refs(struct nf_queue_entry *entry); diff --git a/include/net/netns/netfilter.h b/include/net/netns/netfilter.h index 38aa4983e2a9..36d723579af2 100644 --- a/include/net/netns/netfilter.h +++ b/include/net/netns/netfilter.h @@ -5,11 +5,13 @@ struct proc_dir_entry; struct nf_logger; +struct nf_queue_handler; struct netns_nf { #if defined CONFIG_PROC_FS struct proc_dir_entry *proc_netfilter; #endif + const struct nf_queue_handler __rcu *queue_handler; const struct nf_logger __rcu *nf_loggers[NFPROTO_NUMPROTO]; #ifdef CONFIG_SYSCTL struct ctl_table_header *nf_log_dir_header; diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c index 5baa8e24e6ac..b19ad20a705c 100644 --- a/net/netfilter/nf_queue.c +++ b/net/netfilter/nf_queue.c @@ -26,23 +26,21 @@ * Once the queue is registered it must reinject all packets it * receives, no matter what. */ -static const struct nf_queue_handler __rcu *queue_handler __read_mostly; /* return EBUSY when somebody else is registered, return EEXIST if the * same handler is registered, return 0 in case of success. */ -void nf_register_queue_handler(const struct nf_queue_handler *qh) +void nf_register_queue_handler(struct net *net, const struct nf_queue_handler *qh) { /* should never happen, we only have one queueing backend in kernel */ - WARN_ON(rcu_access_pointer(queue_handler)); - rcu_assign_pointer(queue_handler, qh); + WARN_ON(rcu_access_pointer(net->nf.queue_handler)); + rcu_assign_pointer(net->nf.queue_handler, qh); } EXPORT_SYMBOL(nf_register_queue_handler); /* The caller must flush their queue before this */ -void nf_unregister_queue_handler(void) +void nf_unregister_queue_handler(struct net *net) { - RCU_INIT_POINTER(queue_handler, NULL); - synchronize_rcu(); + RCU_INIT_POINTER(net->nf.queue_handler, NULL); } EXPORT_SYMBOL(nf_unregister_queue_handler); @@ -103,7 +101,7 @@ void nf_queue_nf_hook_drop(struct net *net, struct nf_hook_ops *ops) const struct nf_queue_handler *qh; rcu_read_lock(); - qh = rcu_dereference(queue_handler); + qh = rcu_dereference(net->nf.queue_handler); if (qh) qh->nf_hook_drop(net, ops); rcu_read_unlock(); @@ -122,9 +120,10 @@ int nf_queue(struct sk_buff *skb, struct nf_queue_entry *entry = NULL; const struct nf_afinfo *afinfo; const struct nf_queue_handler *qh; + struct net *net = state->net; /* QUEUE == DROP if no one is waiting, to be safe. */ - qh = rcu_dereference(queue_handler); + qh = rcu_dereference(net->nf.queue_handler); if (!qh) { status = -ESRCH; goto err; diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c index e34256a0e7e9..309ac026aac2 100644 --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -1377,21 +1377,29 @@ static int __net_init nfnl_queue_net_init(struct net *net) net->nf.proc_netfilter, &nfqnl_file_ops)) return -ENOMEM; #endif + nf_register_queue_handler(net, &nfqh); return 0; } static void __net_exit nfnl_queue_net_exit(struct net *net) { + nf_unregister_queue_handler(net); #ifdef CONFIG_PROC_FS remove_proc_entry("nfnetlink_queue", net->nf.proc_netfilter); #endif } +static void nfnl_queue_net_exit_batch(struct list_head *net_exit_list) +{ + synchronize_rcu(); +} + static struct pernet_operations nfnl_queue_net_ops = { - .init = nfnl_queue_net_init, - .exit = nfnl_queue_net_exit, - .id = &nfnl_queue_net_id, - .size = sizeof(struct nfnl_queue_net), + .init = nfnl_queue_net_init, + .exit = nfnl_queue_net_exit, + .exit_batch = nfnl_queue_net_exit_batch, + .id = &nfnl_queue_net_id, + .size = sizeof(struct nfnl_queue_net), }; static int __init nfnetlink_queue_init(void) @@ -1412,7 +1420,6 @@ static int __init nfnetlink_queue_init(void) } register_netdevice_notifier(&nfqnl_dev_notifier); - nf_register_queue_handler(&nfqh); return status; cleanup_netlink_notifier: @@ -1424,7 +1431,6 @@ out: static void __exit nfnetlink_queue_fini(void) { - nf_unregister_queue_handler(); unregister_netdevice_notifier(&nfqnl_dev_notifier); nfnetlink_subsys_unregister(&nfqnl_subsys); netlink_unregister_notifier(&nfqnl_rtnl_notifier); -- cgit v1.2.3 From ab6a11a7c8ef47f996974dd3c648c2c0b1a36ab1 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Fri, 20 May 2016 17:33:03 -0500 Subject: crypto: ccp - Fix AES XTS error for request sizes above 4096 The ccp-crypto module for AES XTS support has a bug that can allow requests greater than 4096 bytes in size to be passed to the CCP hardware. The CCP hardware does not support request sizes larger than 4096, resulting in incorrect output. The request should actually be handled by the fallback mechanism instantiated by the ccp-crypto module. Add a check to insure the request size is less than or equal to the maximum supported size and use the fallback mechanism if it is not. Cc: # 3.14.x- Signed-off-by: Tom Lendacky Signed-off-by: Herbert Xu --- drivers/crypto/ccp/ccp-crypto-aes-xts.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/ccp/ccp-crypto-aes-xts.c b/drivers/crypto/ccp/ccp-crypto-aes-xts.c index 52c7395cb8d8..0d0d4529ee36 100644 --- a/drivers/crypto/ccp/ccp-crypto-aes-xts.c +++ b/drivers/crypto/ccp/ccp-crypto-aes-xts.c @@ -122,6 +122,7 @@ static int ccp_aes_xts_crypt(struct ablkcipher_request *req, struct ccp_ctx *ctx = crypto_tfm_ctx(req->base.tfm); struct ccp_aes_req_ctx *rctx = ablkcipher_request_ctx(req); unsigned int unit; + u32 unit_size; int ret; if (!ctx->u.aes.key_len) @@ -133,11 +134,17 @@ static int ccp_aes_xts_crypt(struct ablkcipher_request *req, if (!req->info) return -EINVAL; - for (unit = 0; unit < ARRAY_SIZE(unit_size_map); unit++) - if (!(req->nbytes & (unit_size_map[unit].size - 1))) - break; + unit_size = CCP_XTS_AES_UNIT_SIZE__LAST; + if (req->nbytes <= unit_size_map[0].size) { + for (unit = 0; unit < ARRAY_SIZE(unit_size_map); unit++) { + if (!(req->nbytes & (unit_size_map[unit].size - 1))) { + unit_size = unit_size_map[unit].value; + break; + } + } + } - if ((unit_size_map[unit].value == CCP_XTS_AES_UNIT_SIZE__LAST) || + if ((unit_size == CCP_XTS_AES_UNIT_SIZE__LAST) || (ctx->u.aes.key_len != AES_KEYSIZE_128)) { /* Use the fallback to process the request for any * unsupported unit sizes or key sizes @@ -158,7 +165,7 @@ static int ccp_aes_xts_crypt(struct ablkcipher_request *req, rctx->cmd.engine = CCP_ENGINE_XTS_AES_128; rctx->cmd.u.xts.action = (encrypt) ? CCP_AES_ACTION_ENCRYPT : CCP_AES_ACTION_DECRYPT; - rctx->cmd.u.xts.unit_size = unit_size_map[unit].value; + rctx->cmd.u.xts.unit_size = unit_size; rctx->cmd.u.xts.key = &ctx->u.aes.key_sg; rctx->cmd.u.xts.key_len = ctx->u.aes.key_len; rctx->cmd.u.xts.iv = &rctx->iv_sg; -- cgit v1.2.3 From b9d8905e4a751e2cdc0fb474856b7183c594dcc6 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 24 May 2016 22:51:27 +0200 Subject: reiserfs: check kstrdup failure Check out-of-memory failure of the kstrdup option. Note that the argument "arg" may be NULL (in that case kstrup returns NULL), so out of memory condition happened if arg was non-NULL and kstrdup returned NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Note that to properly report options after remount, the reiserfs filesystem should implement the show_options method. Without the show_options method, options changed with remount replace existing options. Signed-off-by: Mikulas Patocka Signed-off-by: Jan Kara --- fs/reiserfs/super.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index b8f2d1e8c645..c72c16c5a60f 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -1393,7 +1393,7 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg) unsigned long safe_mask = 0; unsigned int commit_max_age = (unsigned int)-1; struct reiserfs_journal *journal = SB_JOURNAL(s); - char *new_opts = kstrdup(arg, GFP_KERNEL); + char *new_opts; int err; char *qf_names[REISERFS_MAXQUOTAS]; unsigned int qfmt = 0; @@ -1401,6 +1401,10 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg) int i; #endif + new_opts = kstrdup(arg, GFP_KERNEL); + if (arg && !new_opts) + return -ENOMEM; + sync_filesystem(s); reiserfs_write_lock(s); @@ -1546,7 +1550,8 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg) } out_ok_unlocked: - replace_mount_options(s, new_opts); + if (new_opts) + replace_mount_options(s, new_opts); return 0; out_err_unlock: -- cgit v1.2.3 From 4f996e234dad488e5d9ba0858bc1bae12eff82c3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 25 May 2016 11:48:25 -0400 Subject: percpu: fix synchronization between chunk->map_extend_work and chunk destruction Atomic allocations can trigger async map extensions which is serviced by chunk->map_extend_work. pcpu_balance_work which is responsible for destroying idle chunks wasn't synchronizing properly against chunk->map_extend_work and may end up freeing the chunk while the work item is still in flight. This patch fixes the bug by rolling async map extension operations into pcpu_balance_work. Signed-off-by: Tejun Heo Reported-and-tested-by: Alexei Starovoitov Reported-by: Vlastimil Babka Reported-by: Sasha Levin Cc: stable@vger.kernel.org # v3.18+ Fixes: 9c824b6a172c ("percpu: make sure chunk->map array has available space") --- mm/percpu.c | 57 ++++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/mm/percpu.c b/mm/percpu.c index 0c59684f1ff2..b1d2a3844792 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -112,7 +112,7 @@ struct pcpu_chunk { int map_used; /* # of map entries used before the sentry */ int map_alloc; /* # of map entries allocated */ int *map; /* allocation map */ - struct work_struct map_extend_work;/* async ->map[] extension */ + struct list_head map_extend_list;/* on pcpu_map_extend_chunks */ void *data; /* chunk data */ int first_free; /* no free below this */ @@ -166,6 +166,9 @@ static DEFINE_MUTEX(pcpu_alloc_mutex); /* chunk create/destroy, [de]pop */ static struct list_head *pcpu_slot __read_mostly; /* chunk list slots */ +/* chunks which need their map areas extended, protected by pcpu_lock */ +static LIST_HEAD(pcpu_map_extend_chunks); + /* * The number of empty populated pages, protected by pcpu_lock. The * reserved chunk doesn't contribute to the count. @@ -395,13 +398,19 @@ static int pcpu_need_to_extend(struct pcpu_chunk *chunk, bool is_atomic) { int margin, new_alloc; + lockdep_assert_held(&pcpu_lock); + if (is_atomic) { margin = 3; if (chunk->map_alloc < - chunk->map_used + PCPU_ATOMIC_MAP_MARGIN_LOW && - pcpu_async_enabled) - schedule_work(&chunk->map_extend_work); + chunk->map_used + PCPU_ATOMIC_MAP_MARGIN_LOW) { + if (list_empty(&chunk->map_extend_list)) { + list_add_tail(&chunk->map_extend_list, + &pcpu_map_extend_chunks); + pcpu_schedule_balance_work(); + } + } } else { margin = PCPU_ATOMIC_MAP_MARGIN_HIGH; } @@ -467,20 +476,6 @@ out_unlock: return 0; } -static void pcpu_map_extend_workfn(struct work_struct *work) -{ - struct pcpu_chunk *chunk = container_of(work, struct pcpu_chunk, - map_extend_work); - int new_alloc; - - spin_lock_irq(&pcpu_lock); - new_alloc = pcpu_need_to_extend(chunk, false); - spin_unlock_irq(&pcpu_lock); - - if (new_alloc) - pcpu_extend_area_map(chunk, new_alloc); -} - /** * pcpu_fit_in_area - try to fit the requested allocation in a candidate area * @chunk: chunk the candidate area belongs to @@ -740,7 +735,7 @@ static struct pcpu_chunk *pcpu_alloc_chunk(void) chunk->map_used = 1; INIT_LIST_HEAD(&chunk->list); - INIT_WORK(&chunk->map_extend_work, pcpu_map_extend_workfn); + INIT_LIST_HEAD(&chunk->map_extend_list); chunk->free_size = pcpu_unit_size; chunk->contig_hint = pcpu_unit_size; @@ -1129,6 +1124,7 @@ static void pcpu_balance_workfn(struct work_struct *work) if (chunk == list_first_entry(free_head, struct pcpu_chunk, list)) continue; + list_del_init(&chunk->map_extend_list); list_move(&chunk->list, &to_free); } @@ -1146,6 +1142,25 @@ static void pcpu_balance_workfn(struct work_struct *work) pcpu_destroy_chunk(chunk); } + /* service chunks which requested async area map extension */ + do { + int new_alloc = 0; + + spin_lock_irq(&pcpu_lock); + + chunk = list_first_entry_or_null(&pcpu_map_extend_chunks, + struct pcpu_chunk, map_extend_list); + if (chunk) { + list_del_init(&chunk->map_extend_list); + new_alloc = pcpu_need_to_extend(chunk, false); + } + + spin_unlock_irq(&pcpu_lock); + + if (new_alloc) + pcpu_extend_area_map(chunk, new_alloc); + } while (chunk); + /* * Ensure there are certain number of free populated pages for * atomic allocs. Fill up from the most packed so that atomic @@ -1644,7 +1659,7 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, */ schunk = memblock_virt_alloc(pcpu_chunk_struct_size, 0); INIT_LIST_HEAD(&schunk->list); - INIT_WORK(&schunk->map_extend_work, pcpu_map_extend_workfn); + INIT_LIST_HEAD(&schunk->map_extend_list); schunk->base_addr = base_addr; schunk->map = smap; schunk->map_alloc = ARRAY_SIZE(smap); @@ -1673,7 +1688,7 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, if (dyn_size) { dchunk = memblock_virt_alloc(pcpu_chunk_struct_size, 0); INIT_LIST_HEAD(&dchunk->list); - INIT_WORK(&dchunk->map_extend_work, pcpu_map_extend_workfn); + INIT_LIST_HEAD(&dchunk->map_extend_list); dchunk->base_addr = base_addr; dchunk->map = dmap; dchunk->map_alloc = ARRAY_SIZE(dmap); -- cgit v1.2.3 From 6710e594f71ccaad8101bc64321152af7cd9ea28 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 25 May 2016 11:48:25 -0400 Subject: percpu: fix synchronization between synchronous map extension and chunk destruction For non-atomic allocations, pcpu_alloc() can try to extend the area map synchronously after dropping pcpu_lock; however, the extension wasn't synchronized against chunk destruction and the chunk might get freed while extension is in progress. This patch fixes the bug by putting most of non-atomic allocations under pcpu_alloc_mutex to synchronize against pcpu_balance_work which is responsible for async chunk management including destruction. Signed-off-by: Tejun Heo Reported-and-tested-by: Alexei Starovoitov Reported-by: Vlastimil Babka Reported-by: Sasha Levin Cc: stable@vger.kernel.org # v3.18+ Fixes: 1a4d76076cda ("percpu: implement asynchronous chunk population") --- mm/percpu.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/mm/percpu.c b/mm/percpu.c index b1d2a3844792..9903830aaebb 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -162,7 +162,7 @@ static struct pcpu_chunk *pcpu_reserved_chunk; static int pcpu_reserved_chunk_limit; static DEFINE_SPINLOCK(pcpu_lock); /* all internal data structures */ -static DEFINE_MUTEX(pcpu_alloc_mutex); /* chunk create/destroy, [de]pop */ +static DEFINE_MUTEX(pcpu_alloc_mutex); /* chunk create/destroy, [de]pop, map ext */ static struct list_head *pcpu_slot __read_mostly; /* chunk list slots */ @@ -444,6 +444,8 @@ static int pcpu_extend_area_map(struct pcpu_chunk *chunk, int new_alloc) size_t old_size = 0, new_size = new_alloc * sizeof(new[0]); unsigned long flags; + lockdep_assert_held(&pcpu_alloc_mutex); + new = pcpu_mem_zalloc(new_size); if (!new) return -ENOMEM; @@ -890,6 +892,9 @@ static void __percpu *pcpu_alloc(size_t size, size_t align, bool reserved, return NULL; } + if (!is_atomic) + mutex_lock(&pcpu_alloc_mutex); + spin_lock_irqsave(&pcpu_lock, flags); /* serve reserved allocations from the reserved chunk if available */ @@ -962,12 +967,9 @@ restart: if (is_atomic) goto fail; - mutex_lock(&pcpu_alloc_mutex); - if (list_empty(&pcpu_slot[pcpu_nr_slots - 1])) { chunk = pcpu_create_chunk(); if (!chunk) { - mutex_unlock(&pcpu_alloc_mutex); err = "failed to allocate new chunk"; goto fail; } @@ -978,7 +980,6 @@ restart: spin_lock_irqsave(&pcpu_lock, flags); } - mutex_unlock(&pcpu_alloc_mutex); goto restart; area_found: @@ -988,8 +989,6 @@ area_found: if (!is_atomic) { int page_start, page_end, rs, re; - mutex_lock(&pcpu_alloc_mutex); - page_start = PFN_DOWN(off); page_end = PFN_UP(off + size); @@ -1000,7 +999,6 @@ area_found: spin_lock_irqsave(&pcpu_lock, flags); if (ret) { - mutex_unlock(&pcpu_alloc_mutex); pcpu_free_area(chunk, off, &occ_pages); err = "failed to populate"; goto fail_unlock; @@ -1040,6 +1038,8 @@ fail: /* see the flag handling in pcpu_blance_workfn() */ pcpu_atomic_alloc_failed = true; pcpu_schedule_balance_work(); + } else { + mutex_unlock(&pcpu_alloc_mutex); } return NULL; } -- cgit v1.2.3 From 3851112e4737cd52aaeda0ce8d084be9ee128106 Mon Sep 17 00:00:00 2001 From: Vidya Sagar Ravipati Date: Sun, 22 May 2016 23:59:00 -0700 Subject: ethtool: add support for 25G/50G/100G speed modes This patch enhances ethtool link mode bitmap to include 25G/50G/100G speed along with interface modes Signed-off-by: Vidya Sagar Ravipati Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 9222db8ccccc..5f030b46cff4 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1353,6 +1353,15 @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT = 28, ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT = 29, ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT = 30, + ETHTOOL_LINK_MODE_25000baseCR_Full_BIT = 31, + ETHTOOL_LINK_MODE_25000baseKR_Full_BIT = 32, + ETHTOOL_LINK_MODE_25000baseSR_Full_BIT = 33, + ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT = 34, + ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT = 35, + ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT = 36, + ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT = 37, + ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT = 38, + ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT = 39, /* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_* @@ -1361,7 +1370,7 @@ enum ethtool_link_mode_bit_indices { */ __ETHTOOL_LINK_MODE_LAST - = ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT, + = ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT, }; #define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name) \ -- cgit v1.2.3 From ec7c7f5cafdaeea509ad4e7e6f71c2312062c4c6 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Tue, 24 May 2016 05:25:23 -0400 Subject: qed: Reset the enable flag for eth protocol. This patch fixes the coding error in determining the enable flag for the application/protocol. The enable flag should be set for all protocols but the eth. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index a06d19a698b2..21ec1c2df2c7 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -222,7 +222,7 @@ qed_dcbx_process_tlv(struct qed_hwfn *p_hwfn, * indication, but we only got here if there was an * app tlv for the protocol, so dcbx must be enabled. */ - enable = !!(type == DCBX_PROTOCOL_ETH); + enable = !(type == DCBX_PROTOCOL_ETH); qed_dcbx_update_app_info(p_data, p_hwfn, enable, true, priority, tc, type); -- cgit v1.2.3 From 297f7d2cce6a156c174334ee452f2f7a7ba405ca Mon Sep 17 00:00:00 2001 From: Baozeng Ding Date: Tue, 24 May 2016 22:33:24 +0800 Subject: tipc: fix potential null pointer dereferences in some compat functions Before calling the nla_parse_nested function, make sure the pointer to the attribute is not null. This patch fixes several potential null pointer dereference vulnerabilities in the tipc netlink functions. Signed-off-by: Baozeng Ding Signed-off-by: David S. Miller --- net/tipc/netlink_compat.c | 111 ++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 93 insertions(+), 18 deletions(-) diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c index 4dfc5c14f8c3..f795b1dd0ccd 100644 --- a/net/tipc/netlink_compat.c +++ b/net/tipc/netlink_compat.c @@ -346,9 +346,15 @@ static int tipc_nl_compat_bearer_dump(struct tipc_nl_compat_msg *msg, struct nlattr **attrs) { struct nlattr *bearer[TIPC_NLA_BEARER_MAX + 1]; + int err; + + if (!attrs[TIPC_NLA_BEARER]) + return -EINVAL; - nla_parse_nested(bearer, TIPC_NLA_BEARER_MAX, attrs[TIPC_NLA_BEARER], - NULL); + err = nla_parse_nested(bearer, TIPC_NLA_BEARER_MAX, + attrs[TIPC_NLA_BEARER], NULL); + if (err) + return err; return tipc_add_tlv(msg->rep, TIPC_TLV_BEARER_NAME, nla_data(bearer[TIPC_NLA_BEARER_NAME]), @@ -460,14 +466,31 @@ static int tipc_nl_compat_link_stat_dump(struct tipc_nl_compat_msg *msg, struct nlattr *link[TIPC_NLA_LINK_MAX + 1]; struct nlattr *prop[TIPC_NLA_PROP_MAX + 1]; struct nlattr *stats[TIPC_NLA_STATS_MAX + 1]; + int err; - nla_parse_nested(link, TIPC_NLA_LINK_MAX, attrs[TIPC_NLA_LINK], NULL); + if (!attrs[TIPC_NLA_LINK]) + return -EINVAL; - nla_parse_nested(prop, TIPC_NLA_PROP_MAX, link[TIPC_NLA_LINK_PROP], - NULL); + err = nla_parse_nested(link, TIPC_NLA_LINK_MAX, attrs[TIPC_NLA_LINK], + NULL); + if (err) + return err; + + if (!link[TIPC_NLA_LINK_PROP]) + return -EINVAL; - nla_parse_nested(stats, TIPC_NLA_STATS_MAX, link[TIPC_NLA_LINK_STATS], - NULL); + err = nla_parse_nested(prop, TIPC_NLA_PROP_MAX, + link[TIPC_NLA_LINK_PROP], NULL); + if (err) + return err; + + if (!link[TIPC_NLA_LINK_STATS]) + return -EINVAL; + + err = nla_parse_nested(stats, TIPC_NLA_STATS_MAX, + link[TIPC_NLA_LINK_STATS], NULL); + if (err) + return err; name = (char *)TLV_DATA(msg->req); if (strcmp(name, nla_data(link[TIPC_NLA_LINK_NAME])) != 0) @@ -569,8 +592,15 @@ static int tipc_nl_compat_link_dump(struct tipc_nl_compat_msg *msg, { struct nlattr *link[TIPC_NLA_LINK_MAX + 1]; struct tipc_link_info link_info; + int err; - nla_parse_nested(link, TIPC_NLA_LINK_MAX, attrs[TIPC_NLA_LINK], NULL); + if (!attrs[TIPC_NLA_LINK]) + return -EINVAL; + + err = nla_parse_nested(link, TIPC_NLA_LINK_MAX, attrs[TIPC_NLA_LINK], + NULL); + if (err) + return err; link_info.dest = nla_get_flag(link[TIPC_NLA_LINK_DEST]); link_info.up = htonl(nla_get_flag(link[TIPC_NLA_LINK_UP])); @@ -758,12 +788,23 @@ static int tipc_nl_compat_name_table_dump(struct tipc_nl_compat_msg *msg, u32 node, depth, type, lowbound, upbound; static const char * const scope_str[] = {"", " zone", " cluster", " node"}; + int err; - nla_parse_nested(nt, TIPC_NLA_NAME_TABLE_MAX, - attrs[TIPC_NLA_NAME_TABLE], NULL); + if (!attrs[TIPC_NLA_NAME_TABLE]) + return -EINVAL; - nla_parse_nested(publ, TIPC_NLA_PUBL_MAX, nt[TIPC_NLA_NAME_TABLE_PUBL], - NULL); + err = nla_parse_nested(nt, TIPC_NLA_NAME_TABLE_MAX, + attrs[TIPC_NLA_NAME_TABLE], NULL); + if (err) + return err; + + if (!nt[TIPC_NLA_NAME_TABLE_PUBL]) + return -EINVAL; + + err = nla_parse_nested(publ, TIPC_NLA_PUBL_MAX, + nt[TIPC_NLA_NAME_TABLE_PUBL], NULL); + if (err) + return err; ntq = (struct tipc_name_table_query *)TLV_DATA(msg->req); @@ -815,8 +856,15 @@ static int __tipc_nl_compat_publ_dump(struct tipc_nl_compat_msg *msg, { u32 type, lower, upper; struct nlattr *publ[TIPC_NLA_PUBL_MAX + 1]; + int err; - nla_parse_nested(publ, TIPC_NLA_PUBL_MAX, attrs[TIPC_NLA_PUBL], NULL); + if (!attrs[TIPC_NLA_PUBL]) + return -EINVAL; + + err = nla_parse_nested(publ, TIPC_NLA_PUBL_MAX, attrs[TIPC_NLA_PUBL], + NULL); + if (err) + return err; type = nla_get_u32(publ[TIPC_NLA_PUBL_TYPE]); lower = nla_get_u32(publ[TIPC_NLA_PUBL_LOWER]); @@ -876,7 +924,13 @@ static int tipc_nl_compat_sk_dump(struct tipc_nl_compat_msg *msg, u32 sock_ref; struct nlattr *sock[TIPC_NLA_SOCK_MAX + 1]; - nla_parse_nested(sock, TIPC_NLA_SOCK_MAX, attrs[TIPC_NLA_SOCK], NULL); + if (!attrs[TIPC_NLA_SOCK]) + return -EINVAL; + + err = nla_parse_nested(sock, TIPC_NLA_SOCK_MAX, attrs[TIPC_NLA_SOCK], + NULL); + if (err) + return err; sock_ref = nla_get_u32(sock[TIPC_NLA_SOCK_REF]); tipc_tlv_sprintf(msg->rep, "%u:", sock_ref); @@ -917,9 +971,15 @@ static int tipc_nl_compat_media_dump(struct tipc_nl_compat_msg *msg, struct nlattr **attrs) { struct nlattr *media[TIPC_NLA_MEDIA_MAX + 1]; + int err; + + if (!attrs[TIPC_NLA_MEDIA]) + return -EINVAL; - nla_parse_nested(media, TIPC_NLA_MEDIA_MAX, attrs[TIPC_NLA_MEDIA], - NULL); + err = nla_parse_nested(media, TIPC_NLA_MEDIA_MAX, attrs[TIPC_NLA_MEDIA], + NULL); + if (err) + return err; return tipc_add_tlv(msg->rep, TIPC_TLV_MEDIA_NAME, nla_data(media[TIPC_NLA_MEDIA_NAME]), @@ -931,8 +991,15 @@ static int tipc_nl_compat_node_dump(struct tipc_nl_compat_msg *msg, { struct tipc_node_info node_info; struct nlattr *node[TIPC_NLA_NODE_MAX + 1]; + int err; - nla_parse_nested(node, TIPC_NLA_NODE_MAX, attrs[TIPC_NLA_NODE], NULL); + if (!attrs[TIPC_NLA_NODE]) + return -EINVAL; + + err = nla_parse_nested(node, TIPC_NLA_NODE_MAX, attrs[TIPC_NLA_NODE], + NULL); + if (err) + return err; node_info.addr = htonl(nla_get_u32(node[TIPC_NLA_NODE_ADDR])); node_info.up = htonl(nla_get_flag(node[TIPC_NLA_NODE_UP])); @@ -971,8 +1038,16 @@ static int tipc_nl_compat_net_dump(struct tipc_nl_compat_msg *msg, { __be32 id; struct nlattr *net[TIPC_NLA_NET_MAX + 1]; + int err; + + if (!attrs[TIPC_NLA_NET]) + return -EINVAL; + + err = nla_parse_nested(net, TIPC_NLA_NET_MAX, attrs[TIPC_NLA_NET], + NULL); + if (err) + return err; - nla_parse_nested(net, TIPC_NLA_NET_MAX, attrs[TIPC_NLA_NET], NULL); id = htonl(nla_get_u32(net[TIPC_NLA_NET_ID])); return tipc_add_tlv(msg->rep, TIPC_TLV_UNSIGNED, &id, sizeof(id)); -- cgit v1.2.3 From 91c45e38b9478ff507e05f10151d64cd0d1aad7b Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 24 May 2016 18:03:25 +0200 Subject: net: mvneta: Fix lacking spinlock initialization The spinlock used by the hwbm functions must be initialized by the network driver. This commit fixes this lack and the following erros when lockdep is enabled: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0xb4/0xe0) [] (dump_stack) from [] (__lock_acquire+0x1f58/0x2060) [] (__lock_acquire) from [] (lock_acquire+0xa4/0xd0) [] (lock_acquire) from [] (_raw_spin_lock_irqsave+0x54/0x68) [] (_raw_spin_lock_irqsave) from [] (hwbm_pool_add+0x1c/0xdc) [] (hwbm_pool_add) from [] (mvneta_bm_pool_use+0x338/0x490) [] (mvneta_bm_pool_use) from [] (mvneta_probe+0x654/0x1284) [] (mvneta_probe) from [] (platform_drv_probe+0x4c/0xb0) [] (platform_drv_probe) from [] (driver_probe_device+0x214/0x2c0) [] (driver_probe_device) from [] (__driver_attach+0xc0/0xc4) [] (__driver_attach) from [] (bus_for_each_dev+0x68/0x9c) [] (bus_for_each_dev) from [] (bus_add_driver+0x1a0/0x218) [] (bus_add_driver) from [] (driver_register+0x78/0xf8) [] (driver_register) from [] (do_one_initcall+0x90/0x1dc) [] (do_one_initcall) from [] (kernel_init_freeable+0x15c/0x1fc) [] (kernel_init_freeable) from [] (kernel_init+0x8/0x114) [] (kernel_init) from [] (ret_from_fork+0x14/0x24) Fixes: baa11ebc0c76 ("net: mvneta: Use the new hwbm framework") Reported-by: Russell King Cc: Signed-off-by: Gregory CLEMENT Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta_bm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/marvell/mvneta_bm.c b/drivers/net/ethernet/marvell/mvneta_bm.c index 01fccec632ec..466939f8f0cf 100644 --- a/drivers/net/ethernet/marvell/mvneta_bm.c +++ b/drivers/net/ethernet/marvell/mvneta_bm.c @@ -189,6 +189,7 @@ struct mvneta_bm_pool *mvneta_bm_pool_use(struct mvneta_bm *priv, u8 pool_id, SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); hwbm_pool->construct = mvneta_bm_construct; hwbm_pool->priv = new_pool; + spin_lock_init(&hwbm_pool->lock); /* Create new pool */ err = mvneta_bm_pool_create(priv, new_pool); -- cgit v1.2.3 From b388fc7405e901c7d6f7817d05193c054e761815 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 24 May 2016 18:03:26 +0200 Subject: net: hwbm: Fix unbalanced spinlock in error case When hwbm_pool_add exited in error the spinlock was not released. This patch fixes this issue. Fixes: 8cb2d8bf57e6 ("net: add a hardware buffer management helper API") Reported-by: Jean-Jacques Hiblot Cc: Signed-off-by: Gregory CLEMENT Signed-off-by: David S. Miller --- net/core/hwbm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/core/hwbm.c b/net/core/hwbm.c index 941c28486896..2cab489ae62e 100644 --- a/net/core/hwbm.c +++ b/net/core/hwbm.c @@ -55,18 +55,21 @@ int hwbm_pool_add(struct hwbm_pool *bm_pool, unsigned int buf_num, gfp_t gfp) spin_lock_irqsave(&bm_pool->lock, flags); if (bm_pool->buf_num == bm_pool->size) { pr_warn("pool already filled\n"); + spin_unlock_irqrestore(&bm_pool->lock, flags); return bm_pool->buf_num; } if (buf_num + bm_pool->buf_num > bm_pool->size) { pr_warn("cannot allocate %d buffers for pool\n", buf_num); + spin_unlock_irqrestore(&bm_pool->lock, flags); return 0; } if ((buf_num + bm_pool->buf_num) < bm_pool->buf_num) { pr_warn("Adding %d buffers to the %d current buffers will overflow\n", buf_num, bm_pool->buf_num); + spin_unlock_irqrestore(&bm_pool->lock, flags); return 0; } -- cgit v1.2.3 From c0795bf64cba4d1b796fdc5b74b33772841ed1bb Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Tue, 24 May 2016 18:53:36 +0100 Subject: sfc: on MC reset, clear PIO buffer linkage in TXQs Otherwise, if we fail to allocate new PIO buffers, our TXQs will try to use the old ones, which aren't there any more. Fixes: 183233bec810 "sfc: Allocate and link PIO buffers; map them with write-combining" Signed-off-by: Edward Cree Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/ef10.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index 1681084cc96f..1f309127457d 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -619,6 +619,17 @@ fail: return rc; } +static void efx_ef10_forget_old_piobufs(struct efx_nic *efx) +{ + struct efx_channel *channel; + struct efx_tx_queue *tx_queue; + + /* All our existing PIO buffers went away */ + efx_for_each_channel(channel, efx) + efx_for_each_channel_tx_queue(tx_queue, channel) + tx_queue->piobuf = NULL; +} + #else /* !EFX_USE_PIO */ static int efx_ef10_alloc_piobufs(struct efx_nic *efx, unsigned int n) @@ -635,6 +646,10 @@ static void efx_ef10_free_piobufs(struct efx_nic *efx) { } +static void efx_ef10_forget_old_piobufs(struct efx_nic *efx) +{ +} + #endif /* EFX_USE_PIO */ static void efx_ef10_remove(struct efx_nic *efx) @@ -1018,6 +1033,7 @@ static void efx_ef10_reset_mc_allocations(struct efx_nic *efx) nic_data->must_realloc_vis = true; nic_data->must_restore_filters = true; nic_data->must_restore_piobufs = true; + efx_ef10_forget_old_piobufs(efx); nic_data->rx_rss_context = EFX_EF10_RSS_CONTEXT_INVALID; /* Driver-created vswitches and vports must be re-created */ -- cgit v1.2.3 From 75c0bbd0e23a295faf80aa68bf5ab2b5fac709b2 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 24 May 2016 21:26:39 -0700 Subject: Documentation: networking: dsa: Remove poll_link description This function has been removed in 4baee937b8d5 ("net: dsa: remove DSA link polling") in favor of using the PHYLIB polling mechanism. Reviewed-by: Vivien Didelot Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/networking/dsa/dsa.txt | 5 ----- 1 file changed, 5 deletions(-) diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 631b0f7ae16f..8303eb8ced79 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -416,11 +416,6 @@ PHY devices and link management to the switch port MDIO registers. If unavailable return a negative error code. -- poll_link: Function invoked by DSA to query the link state of the switch - builtin Ethernet PHYs, per port. This function is responsible for calling - netif_carrier_{on,off} when appropriate, and can be used to poll all ports in a - single call. Executes from workqueue context. - - adjust_link: Function invoked by the PHY library when a slave network device is attached to a PHY device. This function is responsible for appropriately configuring the switch port link parameters: speed, duplex, pause based on -- cgit v1.2.3 From 7013d8e1d0a07b74dc6f81b470654290b769e9bb Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 24 May 2016 21:26:40 -0700 Subject: Documentation: networking: dsa: Remove priv_size description We no longer have a priv_size structure member since 5feebd0a8a79 ("net: dsa: Remove allocation of driver private memory") Reviewed-by: Vivien Didelot Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/networking/dsa/dsa.txt | 2 -- 1 file changed, 2 deletions(-) diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 8303eb8ced79..411b57fd73aa 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -369,8 +369,6 @@ does not allocate any driver private context space. Switch configuration -------------------- -- priv_size: additional size needed by the switch driver for its private context - - tag_protocol: this is to indicate what kind of tagging protocol is supported, should be a valid value from the dsa_tag_protocol enum -- cgit v1.2.3 From f05e2db1996d7a640c76481ba5ea3d7a295a8f48 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 24 May 2016 21:26:41 -0700 Subject: Documentation: networking: dsa: Describe port_vlan_filtering Described what the port_vlan_filtering function is supposed to accomplish. Fixes: fb2dabad69f0 ("net: dsa: support VLAN filtering switchdev attr") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller --- Documentation/networking/dsa/dsa.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 411b57fd73aa..9d05ed7f7da5 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -535,6 +535,16 @@ Bridge layer Bridge VLAN filtering --------------------- +- port_vlan_filtering: bridge layer function invoked when the bridge gets + configured for turning on or off VLAN filtering. If nothing specific needs to + be done at the hardware level, this callback does not need to be implemented. + When VLAN filtering is turned on, the hardware must be programmed with + rejecting 802.1Q frames which have VLAN IDs outside of the programmed allowed + VLAN ID map/rules. If there is no PVID programmed into the switch port, + untagged frames must be rejected as well. When turned off the switch must + accept any 802.1Q frames irrespective of their VLAN ID, and untagged frames are + allowed. + - port_vlan_prepare: bridge layer function invoked when the bridge prepares the configuration of a VLAN on the given port. If the operation is not supported by the hardware, this function should return -EOPNOTSUPP to inform the bridge -- cgit v1.2.3 From 9ea46abe22550e3366ff7cee2f8391b35b12f730 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 25 May 2016 12:51:20 -0700 Subject: sparc64: Take ctx_alloc_lock properly in hugetlb_setup(). On cheetahplus chips we take the ctx_alloc_lock in order to modify the TLB lookup parameters for the indexed TLBs, which are stored in the context register. This is called with interrupts disabled, however ctx_alloc_lock is an IRQ safe lock, therefore we must take acquire/release it properly with spin_{lock,unlock}_irq(). Reported-by: Meelis Roos Tested-by: Meelis Roos Signed-off-by: David S. Miller --- arch/sparc/mm/init_64.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 652683cb4b4b..14bb0d5ed3c6 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -2824,9 +2824,10 @@ void hugetlb_setup(struct pt_regs *regs) * the Data-TLB for huge pages. */ if (tlb_type == cheetah_plus) { + bool need_context_reload = false; unsigned long ctx; - spin_lock(&ctx_alloc_lock); + spin_lock_irq(&ctx_alloc_lock); ctx = mm->context.sparc64_ctx_val; ctx &= ~CTX_PGSZ_MASK; ctx |= CTX_PGSZ_BASE << CTX_PGSZ0_SHIFT; @@ -2845,9 +2846,12 @@ void hugetlb_setup(struct pt_regs *regs) * also executing in this address space. */ mm->context.sparc64_ctx_val = ctx; - on_each_cpu(context_reload, mm, 0); + need_context_reload = true; } - spin_unlock(&ctx_alloc_lock); + spin_unlock_irq(&ctx_alloc_lock); + + if (need_context_reload) + on_each_cpu(context_reload, mm, 0); } } #endif -- cgit v1.2.3 From f6988cb63a4e698d8a62a1d085d263d1fcc351ea Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Wed, 25 May 2016 21:21:52 +0200 Subject: team: don't call netdev_change_features under team->lock The team_device_event() notifier calls team_compute_features() to fix vlan_features under team->lock to protect team->port_list. The problem is that subsequent __team_compute_features() calls netdev_change_features() to propagate vlan_features to upper vlan devices while team->lock is still taken. This can lead to deadlock when NETIF_F_LRO is modified on lower devices or team device itself. Example: The team0 as active backup with eth0 and eth1 NICs. Both eth0 & eth1 are LRO capable and LRO is enabled. Thus LRO is also enabled on team0. The command 'ethtool -K team0 lro off' now hangs due to this deadlock: dev_ethtool() -> ethtool_set_features() -> __netdev_update_features(team) -> netdev_sync_lower_features() -> netdev_update_features(lower_1) -> __netdev_update_features(lower_1) -> netdev_features_change(lower_1) -> call_netdevice_notifiers(...) -> team_device_event(lower_1) -> team_compute_features(team) [TAKES team->lock] -> netdev_change_features(team) -> __netdev_update_features(team) -> netdev_sync_lower_features() -> netdev_update_features(lower_2) -> __netdev_update_features(lower_2) -> netdev_features_change(lower_2) -> call_netdevice_notifiers(...) -> team_device_event(lower_2) -> team_compute_features(team) [DEADLOCK] The bug is present in team from the beginning but it appeared after the commit fd867d5 (net/core: generic support for disabling netdev features down stack) that adds synchronization of features with lower devices. Fixes: fd867d5 (net/core: generic support for disabling netdev features down stack) Cc: Jiri Pirko Signed-off-by: Ivan Vecera Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index a0f64cba86ba..2ace126533cd 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -990,7 +990,7 @@ static void team_port_disable(struct team *team, #define TEAM_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \ NETIF_F_RXCSUM | NETIF_F_ALL_TSO) -static void __team_compute_features(struct team *team) +static void ___team_compute_features(struct team *team) { struct team_port *port; u32 vlan_features = TEAM_VLAN_FEATURES & NETIF_F_ALL_FOR_ALL; @@ -1021,15 +1021,20 @@ static void __team_compute_features(struct team *team) team->dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; if (dst_release_flag == (IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM)) team->dev->priv_flags |= IFF_XMIT_DST_RELEASE; +} +static void __team_compute_features(struct team *team) +{ + ___team_compute_features(team); netdev_change_features(team->dev); } static void team_compute_features(struct team *team) { mutex_lock(&team->lock); - __team_compute_features(team); + ___team_compute_features(team); mutex_unlock(&team->lock); + netdev_change_features(team->dev); } static int team_port_enter(struct team *team, struct team_port *port) -- cgit v1.2.3 From 26c5f03b2ae8018418ceb25b2e6a48560e8c2f5b Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Wed, 25 May 2016 14:49:54 +0800 Subject: net: alx: use custom skb allocator This patch follows Eric Dumazet's commit 7b70176421 for Atheros atl1c driver to fix one exactly same bug in alx driver, that the network link will be lost in 1-5 minutes after the device is up. My laptop Lenovo Y580 with Atheros AR8161 ethernet device hit the same problem with kernel 4.4, and it will be cured by Jarod Wilson's commit c406700c for alx driver which get merged in 4.5. But there are still some alx devices can't function well even with Jarod's patch, while this patch could make them work fine. More details on https://bugzilla.kernel.org/show_bug.cgi?id=70761 The debug shows the issue is very likely to be related with the RX DMA address, specifically 0x...f80, if RX buffer get 0x...f80 several times, their will be RX overflow error and device will stop working. For kernel 4.5.0 with Jarod's patch which works fine with my AR8161/Lennov Y580, if I made some change to the __netdev_alloc_skb --> __alloc_page_frag() to make the allocated buffer can get an address with 0x...f80, then the same error happens. If I make it to 0x...f40 or 0x....fc0, everything will be still fine. So I tend to believe that the 0x..f80 address cause the silicon to behave abnormally. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 Cc: Eric Dumazet Cc: Johannes Berg Cc: Jarod Wilson Signed-off-by: Feng Tang Tested-by: Ole Lukoie Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/alx/alx.h | 4 +++ drivers/net/ethernet/atheros/alx/main.c | 48 ++++++++++++++++++++++++++++++++- 2 files changed, 51 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/atheros/alx/alx.h b/drivers/net/ethernet/atheros/alx/alx.h index 8fc93c5f6abc..d02c4240b7df 100644 --- a/drivers/net/ethernet/atheros/alx/alx.h +++ b/drivers/net/ethernet/atheros/alx/alx.h @@ -96,6 +96,10 @@ struct alx_priv { unsigned int rx_ringsz; unsigned int rxbuf_size; + struct page *rx_page; + unsigned int rx_page_offset; + unsigned int rx_frag_size; + struct napi_struct napi; struct alx_tx_queue txq; struct alx_rx_queue rxq; diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index 9fe8b5e310d1..c98acdc0d14f 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -70,6 +70,35 @@ static void alx_free_txbuf(struct alx_priv *alx, int entry) } } +static struct sk_buff *alx_alloc_skb(struct alx_priv *alx, gfp_t gfp) +{ + struct sk_buff *skb; + struct page *page; + + if (alx->rx_frag_size > PAGE_SIZE) + return __netdev_alloc_skb(alx->dev, alx->rxbuf_size, gfp); + + page = alx->rx_page; + if (!page) { + alx->rx_page = page = alloc_page(gfp); + if (unlikely(!page)) + return NULL; + alx->rx_page_offset = 0; + } + + skb = build_skb(page_address(page) + alx->rx_page_offset, + alx->rx_frag_size); + if (likely(skb)) { + alx->rx_page_offset += alx->rx_frag_size; + if (alx->rx_page_offset >= PAGE_SIZE) + alx->rx_page = NULL; + else + get_page(page); + } + return skb; +} + + static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) { struct alx_rx_queue *rxq = &alx->rxq; @@ -86,7 +115,7 @@ static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) while (!cur_buf->skb && next != rxq->read_idx) { struct alx_rfd *rfd = &rxq->rfd[cur]; - skb = __netdev_alloc_skb(alx->dev, alx->rxbuf_size, gfp); + skb = alx_alloc_skb(alx, gfp); if (!skb) break; dma = dma_map_single(&alx->hw.pdev->dev, @@ -124,6 +153,7 @@ static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) alx_write_mem16(&alx->hw, ALX_RFD_PIDX, cur); } + return count; } @@ -592,6 +622,11 @@ static void alx_free_rings(struct alx_priv *alx) kfree(alx->txq.bufs); kfree(alx->rxq.bufs); + if (alx->rx_page) { + put_page(alx->rx_page); + alx->rx_page = NULL; + } + dma_free_coherent(&alx->hw.pdev->dev, alx->descmem.size, alx->descmem.virt, @@ -646,6 +681,7 @@ static int alx_request_irq(struct alx_priv *alx) alx->dev->name, alx); if (!err) goto out; + /* fall back to legacy interrupt */ pci_disable_msi(alx->hw.pdev); } @@ -689,6 +725,7 @@ static int alx_init_sw(struct alx_priv *alx) struct pci_dev *pdev = alx->hw.pdev; struct alx_hw *hw = &alx->hw; int err; + unsigned int head_size; err = alx_identify_hw(alx); if (err) { @@ -704,7 +741,12 @@ static int alx_init_sw(struct alx_priv *alx) hw->smb_timer = 400; hw->mtu = alx->dev->mtu; + alx->rxbuf_size = ALX_MAX_FRAME_LEN(hw->mtu); + head_size = SKB_DATA_ALIGN(alx->rxbuf_size + NET_SKB_PAD) + + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + alx->rx_frag_size = roundup_pow_of_two(head_size); + alx->tx_ringsz = 256; alx->rx_ringsz = 512; hw->imt = 200; @@ -806,6 +848,7 @@ static int alx_change_mtu(struct net_device *netdev, int mtu) { struct alx_priv *alx = netdev_priv(netdev); int max_frame = ALX_MAX_FRAME_LEN(mtu); + unsigned int head_size; if ((max_frame < ALX_MIN_FRAME_SIZE) || (max_frame > ALX_MAX_FRAME_SIZE)) @@ -817,6 +860,9 @@ static int alx_change_mtu(struct net_device *netdev, int mtu) netdev->mtu = mtu; alx->hw.mtu = mtu; alx->rxbuf_size = max(max_frame, ALX_DEF_RXBUF_SIZE); + head_size = SKB_DATA_ALIGN(alx->rxbuf_size + NET_SKB_PAD) + + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + alx->rx_frag_size = roundup_pow_of_two(head_size); netdev_update_features(netdev); if (netif_running(netdev)) alx_reinit(alx); -- cgit v1.2.3 From 643d60bf575daaba93c1ac0d0e1c4b1d4ded1f75 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 26 May 2016 00:40:23 +0200 Subject: net: stmmac: Fix incorrect memcpy source memory The memcpy() currently copies mdio_bus_data into new_bus->irq, which makes no sense, since the mdio_bus_data structure contains more than just irqs. The code was likely supposed to copy mdio_bus_data->irqs into the new_bus->irq instead, so fix this. Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core") Signed-off-by: Marek Vasut Cc: David S. Miller Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index 3f83c369f56c..ec295851812b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -297,7 +297,7 @@ int stmmac_mdio_register(struct net_device *ndev) return -ENOMEM; if (mdio_bus_data->irqs) - memcpy(new_bus->irq, mdio_bus_data, sizeof(new_bus->irq)); + memcpy(new_bus->irq, mdio_bus_data->irqs, sizeof(new_bus->irq)); #ifdef CONFIG_OF if (priv->device->of_node) -- cgit v1.2.3 From 3424d9be8f09649e6290d066c5c3cccff1c0ce77 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 26 May 2016 00:40:05 +0200 Subject: net: arc: trivial: Replace comma with a semicolon Fix a typo in the driver, replace comma with a semicolon at the end of statement. While using comma is a legal C here and probably does not even generate compiler warning, it was unlikely the intention. Signed-off-by: Marek Vasut Cc: David S. Miller Cc: Caesar Wang Cc: Heiko Stuebner Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_mdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/arc/emac_mdio.c b/drivers/net/ethernet/arc/emac_mdio.c index 16419f550eff..058460bdd5a6 100644 --- a/drivers/net/ethernet/arc/emac_mdio.c +++ b/drivers/net/ethernet/arc/emac_mdio.c @@ -141,7 +141,7 @@ int arc_mdio_probe(struct arc_emac_priv *priv) priv->bus = bus; bus->priv = priv; bus->parent = priv->dev; - bus->name = "Synopsys MII Bus", + bus->name = "Synopsys MII Bus"; bus->read = &arc_mdio_read; bus->write = &arc_mdio_write; bus->reset = &arc_mdio_reset; -- cgit v1.2.3 From bed187b540167eb10320f6a2177604421650772e Mon Sep 17 00:00:00 2001 From: Xin Long Date: Thu, 26 May 2016 03:09:23 +0800 Subject: sctp: fix double EPs display in sctp_diag We have this situation: that EP hash table, contains only the EPs that are listening, while the transports one, has the opposite. We have to traverse both to dump all. But when we traverse the transports one we will also get EPs that are in the EP hash if they are listening. In this case, the EP is dumped twice. We will fix it by checking if the endpoint that is in the endpoint hash table contains any ep->asoc in there, as it means we will also find it via transport hash, and thus we can/should skip it, depending on the filters used, like 'ss -l'. Still, we should NOT skip it if the user is listing only listening endpoints, because then we are not traversing the transport hash. so we have to check idiag_states there also. Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sctp/sctp_diag.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/sctp/sctp_diag.c b/net/sctp/sctp_diag.c index 8e3e769dc9ea..1ce724b87618 100644 --- a/net/sctp/sctp_diag.c +++ b/net/sctp/sctp_diag.c @@ -356,6 +356,9 @@ static int sctp_ep_dump(struct sctp_endpoint *ep, void *p) if (cb->args[4] < cb->args[1]) goto next; + if ((r->idiag_states & ~TCPF_LISTEN) && !list_empty(&ep->asocs)) + goto next; + if (r->sdiag_family != AF_UNSPEC && sk->sk_family != r->sdiag_family) goto next; -- cgit v1.2.3 From 63a664b7e92b14aaa1e1c3e9ae362aa70cf4cefb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 25 May 2016 09:50:36 -0700 Subject: net/mlx4_en: fix tx_dropped bug 1) mlx4_en_xmit() can increment priv->stats.tx_dropped, but this variable is overwritten in mlx4_en_DUMP_ETH_STATS(). 2) This increment was not SMP safe, as a port might have many TX queues. Add a per TX ring tx_dropped to fix these issues. This is u32 as mlx4_en_DUMP_ETH_STATS() will add a 32bit field. So lets avoid bugs with SNMP agents having to cope with partial overwraps. (One of these agents being bond_fold_stats()) Signed-off-by: Eric Dumazet Reported-by: Willem de Bruijn Cc: Eugenia Emantayev Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 1 + drivers/net/ethernet/mellanox/mlx4/en_port.c | 4 +++- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 8 ++++---- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 + 4 files changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 92e0624f4cf0..cfd50206f7c3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1892,6 +1892,7 @@ static void mlx4_en_clear_stats(struct net_device *dev) priv->tx_ring[i]->bytes = 0; priv->tx_ring[i]->packets = 0; priv->tx_ring[i]->tx_csum = 0; + priv->tx_ring[i]->tx_dropped = 0; } for (i = 0; i < priv->rx_ring_num; i++) { priv->rx_ring[i]->bytes = 0; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c index 20b6c2e678b8..3df8690154b1 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_port.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c @@ -188,6 +188,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) } stats->tx_packets = 0; stats->tx_bytes = 0; + stats->tx_dropped = 0; priv->port_stats.tx_chksum_offload = 0; priv->port_stats.queue_stopped = 0; priv->port_stats.wake_queue = 0; @@ -199,6 +200,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) stats->tx_packets += ring->packets; stats->tx_bytes += ring->bytes; + stats->tx_dropped += ring->tx_dropped; priv->port_stats.tx_chksum_offload += ring->tx_csum; priv->port_stats.queue_stopped += ring->queue_stopped; priv->port_stats.wake_queue += ring->wake_queue; @@ -251,7 +253,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) stats->tx_fifo_errors = 0; stats->tx_heartbeat_errors = 0; stats->tx_window_errors = 0; - stats->tx_dropped = be32_to_cpu(mlx4_en_stats->TDROP); + stats->tx_dropped += be32_to_cpu(mlx4_en_stats->TDROP); /* RX stats */ priv->pkstats.rx_multicast_packets = stats->multicast; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index f6e61570cb2c..76aa4d27183c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -726,12 +726,12 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) bool inline_ok; u32 ring_cons; - if (!priv->port_up) - goto tx_drop; - tx_ind = skb_get_queue_mapping(skb); ring = priv->tx_ring[tx_ind]; + if (!priv->port_up) + goto tx_drop; + /* fetch ring->cons far ahead before needing it to avoid stall */ ring_cons = ACCESS_ONCE(ring->cons); @@ -1030,7 +1030,7 @@ tx_drop_unmap: tx_drop: dev_kfree_skb_any(skb); - priv->stats.tx_dropped++; + ring->tx_dropped++; return NETDEV_TX_OK; } diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index cc84e09f324a..9a9124031fc7 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -270,6 +270,7 @@ struct mlx4_en_tx_ring { unsigned long tx_csum; unsigned long tso_packets; unsigned long xmit_more; + unsigned int tx_dropped; struct mlx4_bf bf; unsigned long queue_stopped; -- cgit v1.2.3 From 45acbac609e73991dd9c3c9b7ffd03ddb8c939ef Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 25 May 2016 09:50:37 -0700 Subject: net/mlx4_en: clear some TX ring stats in mlx4_en_clear_stats() mlx4_en_clear_stats() clears about everything but few TX ring fields are missing : - queue_stopped, wake_queue, tso_packets, xmit_more Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Cc: Eugenia Emantayev Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index cfd50206f7c3..bd637c4eff13 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1893,6 +1893,10 @@ static void mlx4_en_clear_stats(struct net_device *dev) priv->tx_ring[i]->packets = 0; priv->tx_ring[i]->tx_csum = 0; priv->tx_ring[i]->tx_dropped = 0; + priv->tx_ring[i]->queue_stopped = 0; + priv->tx_ring[i]->wake_queue = 0; + priv->tx_ring[i]->tso_packets = 0; + priv->tx_ring[i]->xmit_more = 0; } for (i = 0; i < priv->rx_ring_num; i++) { priv->rx_ring[i]->bytes = 0; -- cgit v1.2.3 From 9ed17db17fb01a7be5b84558b768c091bdf8bb41 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 25 May 2016 09:50:38 -0700 Subject: net/mlx4_en: get rid of ret_stats mlx4 uses a private struct net_device_stats in a vain attempt to avoid races. This is buggy because multiple cpus could call mlx4_en_get_stats() at the same time, so ret_stats can not guarantee stable results. To fix this, we need to switch to ndo_get_stats64() as this method provides per-thread storage. This allows to reduce mlx4_en_priv bloat. Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Cc: Eugenia Emantayev Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 11 ++++++----- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 - 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index bd637c4eff13..a4fc6e966505 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1296,15 +1296,16 @@ static void mlx4_en_tx_timeout(struct net_device *dev) } -static struct net_device_stats *mlx4_en_get_stats(struct net_device *dev) +static struct rtnl_link_stats64 * +mlx4_en_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats) { struct mlx4_en_priv *priv = netdev_priv(dev); spin_lock_bh(&priv->stats_lock); - memcpy(&priv->ret_stats, &priv->stats, sizeof(priv->stats)); + netdev_stats_to_stats64(stats, &priv->stats); spin_unlock_bh(&priv->stats_lock); - return &priv->ret_stats; + return stats; } static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv) @@ -2487,7 +2488,7 @@ static const struct net_device_ops mlx4_netdev_ops = { .ndo_stop = mlx4_en_close, .ndo_start_xmit = mlx4_en_xmit, .ndo_select_queue = mlx4_en_select_queue, - .ndo_get_stats = mlx4_en_get_stats, + .ndo_get_stats64 = mlx4_en_get_stats64, .ndo_set_rx_mode = mlx4_en_set_rx_mode, .ndo_set_mac_address = mlx4_en_set_mac, .ndo_validate_addr = eth_validate_addr, @@ -2519,7 +2520,7 @@ static const struct net_device_ops mlx4_netdev_ops_master = { .ndo_stop = mlx4_en_close, .ndo_start_xmit = mlx4_en_xmit, .ndo_select_queue = mlx4_en_select_queue, - .ndo_get_stats = mlx4_en_get_stats, + .ndo_get_stats64 = mlx4_en_get_stats64, .ndo_set_rx_mode = mlx4_en_set_rx_mode, .ndo_set_mac_address = mlx4_en_set_mac, .ndo_validate_addr = eth_validate_addr, diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 9a9124031fc7..bfda84df8aae 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -484,7 +484,6 @@ struct mlx4_en_priv { struct net_device *dev; unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; struct net_device_stats stats; - struct net_device_stats ret_stats; struct mlx4_en_port_state port_state; spinlock_t stats_lock; struct ethtool_flow_id ethtool_rules[MAX_NUM_OF_FS_RULES]; -- cgit v1.2.3 From f73a6f439fca0e14f228726e5647d5afe141bc32 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 25 May 2016 09:50:39 -0700 Subject: net/mlx4_en: get rid of private net_device_stats We simply can use the standard net_device stats. We do not need to clear fields that are already 0. Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Cc: Eugenia Emantayev Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 2 +- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 3 +-- drivers/net/ethernet/mellanox/mlx4/en_port.c | 14 +++----------- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 - 4 files changed, 5 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index c761194bb323..fc95affaf76b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -362,7 +362,7 @@ static void mlx4_en_get_ethtool_stats(struct net_device *dev, for (i = 0; i < NUM_MAIN_STATS; i++, bitmap_iterator_inc(&it)) if (bitmap_iterator_test(&it)) - data[index++] = ((unsigned long *)&priv->stats)[i]; + data[index++] = ((unsigned long *)&dev->stats)[i]; for (i = 0; i < NUM_PORT_STATS; i++, bitmap_iterator_inc(&it)) if (bitmap_iterator_test(&it)) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index a4fc6e966505..19ceced6736c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1302,7 +1302,7 @@ mlx4_en_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats) struct mlx4_en_priv *priv = netdev_priv(dev); spin_lock_bh(&priv->stats_lock); - netdev_stats_to_stats64(stats, &priv->stats); + netdev_stats_to_stats64(stats, &dev->stats); spin_unlock_bh(&priv->stats_lock); return stats; @@ -1877,7 +1877,6 @@ static void mlx4_en_clear_stats(struct net_device *dev) if (mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 1)) en_dbg(HW, priv, "Failed dumping statistics\n"); - memset(&priv->stats, 0, sizeof(priv->stats)); memset(&priv->pstats, 0, sizeof(priv->pstats)); memset(&priv->pkstats, 0, sizeof(priv->pkstats)); memset(&priv->port_stats, 0, sizeof(priv->port_stats)); diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c index 3df8690154b1..5aa8b751f417 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_port.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c @@ -152,8 +152,9 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) struct mlx4_counter tmp_counter_stats; struct mlx4_en_stat_out_mbox *mlx4_en_stats; struct mlx4_en_stat_out_flow_control_mbox *flowstats; - struct mlx4_en_priv *priv = netdev_priv(mdev->pndev[port]); - struct net_device_stats *stats = &priv->stats; + struct net_device *dev = mdev->pndev[port]; + struct mlx4_en_priv *priv = netdev_priv(dev); + struct net_device_stats *stats = &dev->stats; struct mlx4_cmd_mailbox *mailbox; u64 in_mod = reset << 8 | port; int err; @@ -239,20 +240,11 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) stats->multicast = en_stats_adder(&mlx4_en_stats->MCAST_prio_0, &mlx4_en_stats->MCAST_prio_1, NUM_PRIORITIES); - stats->collisions = 0; stats->rx_dropped = be32_to_cpu(mlx4_en_stats->RDROP) + sw_rx_dropped; stats->rx_length_errors = be32_to_cpu(mlx4_en_stats->RdropLength); - stats->rx_over_errors = 0; stats->rx_crc_errors = be32_to_cpu(mlx4_en_stats->RCRC); - stats->rx_frame_errors = 0; stats->rx_fifo_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw); - stats->rx_missed_errors = 0; - stats->tx_aborted_errors = 0; - stats->tx_carrier_errors = 0; - stats->tx_fifo_errors = 0; - stats->tx_heartbeat_errors = 0; - stats->tx_window_errors = 0; stats->tx_dropped += be32_to_cpu(mlx4_en_stats->TDROP); /* RX stats */ diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index bfda84df8aae..467d47ed2c39 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -483,7 +483,6 @@ struct mlx4_en_priv { struct mlx4_en_port_profile *prof; struct net_device *dev; unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; - struct net_device_stats stats; struct mlx4_en_port_state port_state; spinlock_t stats_lock; struct ethtool_flow_id ethtool_rules[MAX_NUM_OF_FS_RULES]; -- cgit v1.2.3 From be7b6d64c0f2f31ea03746edaabb22f57234cb49 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:17 +0300 Subject: qede: Fix VF minimum BW setting VF is currently ignoring the minimum provided by the API, mistakenly using the maximum for minimum as well. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 337e839ca586..3bb1428e81b7 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -1824,7 +1824,7 @@ static int qede_set_vf_rate(struct net_device *dev, int vfidx, { struct qede_dev *edev = netdev_priv(dev); - return edev->ops->iov->set_rate(edev->cdev, vfidx, max_tx_rate, + return edev->ops->iov->set_rate(edev->cdev, vfidx, min_tx_rate, max_tx_rate); } -- cgit v1.2.3 From ce2b885cc5014d1cbcbe519c45f00f6a59e5ab70 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:18 +0300 Subject: qede: Reload on GRO changes Since driver is using a FW-based GRO implementation, this has some effects on its ability to cope with GRO enablement/disablement. As a result, driver must perform an inner-reload as a result of a state change in the offload configuration of said feature. [Failure to do so means network stack would continue to receive aggregated packets even though user requested the feature to be disabled]. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_main.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 3bb1428e81b7..5d00d1404bfc 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -2091,6 +2091,29 @@ static void qede_vlan_mark_nonconfigured(struct qede_dev *edev) edev->accept_any_vlan = false; } +int qede_set_features(struct net_device *dev, netdev_features_t features) +{ + struct qede_dev *edev = netdev_priv(dev); + netdev_features_t changes = features ^ dev->features; + bool need_reload = false; + + /* No action needed if hardware GRO is disabled during driver load */ + if (changes & NETIF_F_GRO) { + if (dev->features & NETIF_F_GRO) + need_reload = !edev->gro_disable; + else + need_reload = edev->gro_disable; + } + + if (need_reload && netif_running(edev->ndev)) { + dev->features = features; + qede_reload(edev, NULL, NULL); + return 1; + } + + return 0; +} + #ifdef CONFIG_QEDE_VXLAN static void qede_add_vxlan_port(struct net_device *dev, sa_family_t sa_family, __be16 port) @@ -2175,6 +2198,7 @@ static const struct net_device_ops qede_netdev_ops = { #endif .ndo_vlan_rx_add_vid = qede_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = qede_vlan_rx_kill_vid, + .ndo_set_features = qede_set_features, .ndo_get_stats64 = qede_get_stats64, #ifdef CONFIG_QED_SRIOV .ndo_set_vf_link_state = qede_set_vf_link_state, -- cgit v1.2.3 From 6ecb0a0c0d9539fac1497d1d218e60a393a1070c Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:19 +0300 Subject: qede: Don't expose self-test for VFs PFs and VFs differ in their registered ethtool operations, but they're using a common function for get_sset_count(). As a result, `ethtool -i' for a VF would indicate it supports selftest, although that's not the case. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c index 1bc75358cbc4..ad3cae3b7243 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c +++ b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c @@ -230,7 +230,10 @@ static int qede_get_sset_count(struct net_device *dev, int stringset) case ETH_SS_PRIV_FLAGS: return QEDE_PRI_FLAG_LEN; case ETH_SS_TEST: - return QEDE_ETHTOOL_TEST_MAX; + if (!IS_VF(edev)) + return QEDE_ETHTOOL_TEST_MAX; + else + return 0; default: DP_VERBOSE(edev, QED_MSG_DEBUG, "Unsupported stringset 0x%08x\n", stringset); -- cgit v1.2.3 From 795292916cf9d8c47c53b692bcb36b02953101cf Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Thu, 26 May 2016 11:01:20 +0300 Subject: qed: Fix allocation in interrupt context Commit 39651abd2814 ("qed: add support for dcbx") is re-configuring the QM hw-block as part of its sequence. This is done in attention handling context which is non-sleepable, yet memory is allocated in this flow using GFP_KERNEL. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 089016f46f26..7aeed2fa2b18 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -155,7 +155,7 @@ void qed_resc_free(struct qed_dev *cdev) } } -static int qed_init_qm_info(struct qed_hwfn *p_hwfn) +static int qed_init_qm_info(struct qed_hwfn *p_hwfn, bool b_sleepable) { u8 num_vports, vf_offset = 0, i, vport_id, num_ports, curr_queue = 0; struct qed_qm_info *qm_info = &p_hwfn->qm_info; @@ -182,23 +182,28 @@ static int qed_init_qm_info(struct qed_hwfn *p_hwfn) /* PQs will be arranged as follows: First per-TC PQ then pure-LB quete. */ - qm_info->qm_pq_params = kzalloc(sizeof(*qm_info->qm_pq_params) * - num_pqs, GFP_KERNEL); + qm_info->qm_pq_params = kcalloc(num_pqs, + sizeof(struct init_qm_pq_params), + b_sleepable ? GFP_KERNEL : GFP_ATOMIC); if (!qm_info->qm_pq_params) goto alloc_err; - qm_info->qm_vport_params = kzalloc(sizeof(*qm_info->qm_vport_params) * - num_vports, GFP_KERNEL); + qm_info->qm_vport_params = kcalloc(num_vports, + sizeof(struct init_qm_vport_params), + b_sleepable ? GFP_KERNEL + : GFP_ATOMIC); if (!qm_info->qm_vport_params) goto alloc_err; - qm_info->qm_port_params = kzalloc(sizeof(*qm_info->qm_port_params) * - MAX_NUM_PORTS, GFP_KERNEL); + qm_info->qm_port_params = kcalloc(MAX_NUM_PORTS, + sizeof(struct init_qm_port_params), + b_sleepable ? GFP_KERNEL + : GFP_ATOMIC); if (!qm_info->qm_port_params) goto alloc_err; - qm_info->wfq_data = kcalloc(num_vports, sizeof(*qm_info->wfq_data), - GFP_KERNEL); + qm_info->wfq_data = kcalloc(num_vports, sizeof(struct qed_wfq_data), + b_sleepable ? GFP_KERNEL : GFP_ATOMIC); if (!qm_info->wfq_data) goto alloc_err; @@ -299,7 +304,7 @@ int qed_qm_reconf(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) qed_qm_info_free(p_hwfn); /* initialize qed's qm data structure */ - rc = qed_init_qm_info(p_hwfn); + rc = qed_init_qm_info(p_hwfn, false); if (rc) return rc; @@ -388,7 +393,7 @@ int qed_resc_alloc(struct qed_dev *cdev) goto alloc_err; /* Prepare and process QM requirements */ - rc = qed_init_qm_info(p_hwfn); + rc = qed_init_qm_info(p_hwfn, true); if (rc) goto alloc_err; -- cgit v1.2.3 From cc3d5eb09111a471f942c76e9610ee962e1d4c31 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:21 +0300 Subject: qed: Save min/max accross dcbx-change When DCBx re-negotiation is occurring, the PF's configurations for maximum and minimum bandwidth guarantees are currently lost. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 7aeed2fa2b18..920eadd6417c 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -161,6 +161,8 @@ static int qed_init_qm_info(struct qed_hwfn *p_hwfn, bool b_sleepable) struct qed_qm_info *qm_info = &p_hwfn->qm_info; struct init_qm_port_params *p_qm_port; u16 num_pqs, multi_cos_tcs = 1; + u8 pf_wfq = qm_info->pf_wfq; + u32 pf_rl = qm_info->pf_rl; u16 num_vfs = 0; #ifdef CONFIG_QED_SRIOV @@ -269,10 +271,10 @@ static int qed_init_qm_info(struct qed_hwfn *p_hwfn, bool b_sleepable) for (i = 0; i < qm_info->num_vports; i++) qm_info->qm_vport_params[i].vport_wfq = 1; - qm_info->pf_wfq = 0; - qm_info->pf_rl = 0; qm_info->vport_rl_en = 1; qm_info->vport_wfq_en = 1; + qm_info->pf_rl = pf_rl; + qm_info->pf_wfq = pf_wfq; return 0; -- cgit v1.2.3 From 1af9dcf7f90e6b75b7c42eaaf19cdd5da1354784 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:22 +0300 Subject: qed: Add missing 100g init mode Some of the HW configurations are currently missing for 100g devices. This can cause various classification issues, as well as prevent device from fully reaching line-rate. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 920eadd6417c..2a7c8755eda0 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -588,7 +588,14 @@ static void qed_calc_hw_mode(struct qed_hwfn *p_hwfn) hw_mode |= 1 << MODE_ASIC; + if (p_hwfn->cdev->num_hwfns > 1) + hw_mode |= 1 << MODE_100G; + p_hwfn->hw_info.hw_mode = hw_mode; + + DP_VERBOSE(p_hwfn, (NETIF_MSG_PROBE | NETIF_MSG_IFUP), + "Configuring function for hw_mode: 0x%08x\n", + p_hwfn->hw_info.hw_mode); } /* Init run time data for all PFs on an engine. */ -- cgit v1.2.3 From bb13ace7dca5d2385847e43511acf5777da35c0e Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Thu, 26 May 2016 11:01:23 +0300 Subject: qed: Prevent 100g from working in MSI Adapter can support 100g in both MSIx and INTa, but not in MSI. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 5 +++++ drivers/net/ethernet/qlogic/qed/qed_main.c | 18 ++++++++++-------- 2 files changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 2a7c8755eda0..579c6d500865 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -835,6 +835,11 @@ int qed_hw_init(struct qed_dev *cdev, u32 load_code, param; int rc, mfw_rc, i; + if ((int_mode == QED_INT_MODE_MSI) && (cdev->num_hwfns > 1)) { + DP_NOTICE(cdev, "MSI mode is not supported for CMT devices\n"); + return -EINVAL; + } + if (IS_PF(cdev)) { rc = qed_init_fw_data(cdev, bin_fw_data); if (rc != 0) diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 8b22f87033ce..753064679bde 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -413,15 +413,17 @@ static int qed_set_int_mode(struct qed_dev *cdev, bool force_mode) /* Fallthrough */ case QED_INT_MODE_MSI: - rc = pci_enable_msi(cdev->pdev); - if (!rc) { - int_params->out.int_mode = QED_INT_MODE_MSI; - goto out; - } + if (cdev->num_hwfns == 1) { + rc = pci_enable_msi(cdev->pdev); + if (!rc) { + int_params->out.int_mode = QED_INT_MODE_MSI; + goto out; + } - DP_NOTICE(cdev, "Failed to enable MSI\n"); - if (force_mode) - goto out; + DP_NOTICE(cdev, "Failed to enable MSI\n"); + if (force_mode) + goto out; + } /* Fallthrough */ case QED_INT_MODE_INTA: -- cgit v1.2.3 From 3e7cfce228c6c67dd31e09175eaca55fee0c7082 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:24 +0300 Subject: qed: Don't config min BW on 100g on link flap Currently 100g devices don't support minimum/maximum BW configurations, yet link flaps might cause the driver to attempt to do such a configuration. Prevent this just as we do for the maximum BW. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 579c6d500865..2d89e8c16b32 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -2105,6 +2105,13 @@ void qed_configure_vp_wfq_on_link_change(struct qed_dev *cdev, u32 min_pf_rate) { int i; + if (cdev->num_hwfns > 1) { + DP_VERBOSE(cdev, + NETIF_MSG_LINK, + "WFQ configuration is not supported for this device\n"); + return; + } + for_each_hwfn(cdev, i) { struct qed_hwfn *p_hwfn = &cdev->hwfns[i]; -- cgit v1.2.3 From 38272dc4f1b17437871b786d567e1242d0904f5a Mon Sep 17 00:00:00 2001 From: Wang Nan Date: Tue, 24 May 2016 09:21:27 +0000 Subject: perf symbols: Check kptr_restrict for root If kptr_restrict is set to 2, even root is not allowed to see pointers. This patch checks kptr_restrict even if euid == 0. For root, report error if kptr_restrict is 2. Signed-off-by: Wang Nan Tested-by: Arnaldo Carvalho de Melo Cc: Zefan Li Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1464081688-167940-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/symbol.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 20f9cb32b703..54c4ff2b1cee 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -1933,17 +1933,17 @@ int setup_intlist(struct intlist **list, const char *list_str, static bool symbol__read_kptr_restrict(void) { bool value = false; + FILE *fp = fopen("/proc/sys/kernel/kptr_restrict", "r"); - if (geteuid() != 0) { - FILE *fp = fopen("/proc/sys/kernel/kptr_restrict", "r"); - if (fp != NULL) { - char line[8]; + if (fp != NULL) { + char line[8]; - if (fgets(line, sizeof(line), fp) != NULL) - value = atoi(line) != 0; + if (fgets(line, sizeof(line), fp) != NULL) + value = (geteuid() != 0) ? + (atoi(line) != 0) : + (atoi(line) == 2); - fclose(fp); - } + fclose(fp); } return value; -- cgit v1.2.3 From 3dc6c1d54ff4cc9ce7e8513c286c970304cde20b Mon Sep 17 00:00:00 2001 From: Wang Nan Date: Tue, 24 May 2016 09:21:28 +0000 Subject: perf record: Fix crash when kptr is restricted Before this patch, a simple 'perf record' could fail if kptr_restrict is set to 1 (for normal user) or 2 (for root): # perf record ls WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. Segmentation fault (core dumped) This patch skips perf_event__synthesize_kernel_mmap() when kptr is not available. Signed-off-by: Wang Nan Tested-by: Arnaldo Carvalho de Melo Fixes: 45e90056904b ("perf machine: Do not bail out if not managing to read ref reloc symbol") Cc: Zefan Li Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1464081688-167940-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/event.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c index f6fcc6832949..9b141f12329e 100644 --- a/tools/perf/util/event.c +++ b/tools/perf/util/event.c @@ -673,6 +673,8 @@ int perf_event__synthesize_kernel_mmap(struct perf_tool *tool, int err; union perf_event *event; + if (symbol_conf.kptr_restrict) + return -1; if (map == NULL) return -1; -- cgit v1.2.3 From 5ea5888b2fbf5b230da62b2a21c8247bebb6c9cf Mon Sep 17 00:00:00 2001 From: Wang Nan Date: Fri, 27 May 2016 11:35:51 +0000 Subject: perf ctf: Convert invalid chars in a string before set value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We observed some crazy apps on Android set their comm to unprintable string. For example: # cat /proc/10607/task/*/comm tencent.qqmusic ... Binder_2 日志输出线 <-- Chinese word 'log output thread' WifiManager ... 'perf data convert' fails to convert perf.data with such string to CTF format. For example: # cat << EOF > ./badguy.c #include int main(int argc, char *argv[]) { prctl(PR_SET_NAME, "\xe6\x97\xa5\xe5\xbf\x97\xe8\xbe\x93\xe5\x87\xba\xe7\xba\xbf"); while(1) sleep(1); return 0; } EOF # gcc ./badguy.c # perf record -e sched:* ./a.out # perf data convert --to-ctf ./bad.ctf CTF stream 4 flush failed [ perf data convert: Converted 'perf.data' into CTF data './bad.ctf' ] [ perf data convert: Converted and wrote 0.008 MB (78 samples) ] # babeltrace ./bad.ctf/ [error] Packet size (18446744073709551615 bits) is larger than remaining file size (262144 bits). [error] Stream index creation error. [error] Open file stream error. [warning] [Context] Cannot open_trace of format ctf at path ./bad.ctf. [warning] [Context] cannot open trace "./bad.ctf" from ./bad.ctf/ for reading. [error] Cannot open any trace for reading. [error] opening trace "./bad.ctf/" for reading. [error] none of the specified trace paths could be opened. This patch converts unprintable characters to hexadecimal word. After applying this patch the above test works correctly: # ~/perf data convert --to-ctf ./good.ctf [ perf data convert: Converted 'perf.data' into CTF data './good.ctf' ] [ perf data convert: Converted and wrote 0.008 MB (78 samples) ] # babeltrace ./good.ctf .. [23:14:35.491665268] (+0.000001100) sched:sched_wakeup: { cpu_id = 4 }, { perf_ip = 0xFFFFFFFF810AEF33, perf_tid = 0, perf_pid = 0, perf_id = 5123, perf_period = 1, common_type = 270, common_flags = 45, common_preempt_count = 4, common_pid = 0, comm = "\xe6\x97\xa5\xe5\xbf\x97\xe8\xbe\x93\xe5\x87\xba\xe7\xba\xbf", pid = 1057, prio = 120, success = 1, target_cpu = 4 } [23:14:35.491666230] (+0.000000962) sched:sched_wakeup: { cpu_id = 4 }, { perf_ip = 0xFFFFFFFF810AEF33, perf_tid = 0, perf_pid = 0, perf_id = 5122, perf_period = 1, common_type = 270, common_flags = 45, common_preempt_count = 4, common_pid = 0, comm = "\xe6\x97\xa5\xe5\xbf\x97\xe8\xbe\x93\xe5\x87\xba\xe7\xba\xbf", pid = 1057, prio = 120, success = 1, target_cpu = 4 } .. Committer note: To build perf with libabeltrace, use: $ mkdir -p /tmp/build/perf $ make LIBBABELTRACE=1 LIBBABELTRACE_DIR=/usr/local O=/tmp/build/perf -C tools/perf install-bin Or equivalent (no O=, fixup LIBBABELTRACE_DIR, etc). Signed-off-by: Wang Nan Tested-by: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1464348951-179595-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/data-convert-bt.c | 41 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 39 insertions(+), 2 deletions(-) diff --git a/tools/perf/util/data-convert-bt.c b/tools/perf/util/data-convert-bt.c index bbf69d248ec5..9f53020c3269 100644 --- a/tools/perf/util/data-convert-bt.c +++ b/tools/perf/util/data-convert-bt.c @@ -204,6 +204,44 @@ static unsigned long long adjust_signedness(unsigned long long value_int, int si return (value_int & value_mask) | ~value_mask; } +static int string_set_value(struct bt_ctf_field *field, const char *string) +{ + char *buffer = NULL; + size_t len = strlen(string), i, p; + int err; + + for (i = p = 0; i < len; i++, p++) { + if (isprint(string[i])) { + if (!buffer) + continue; + buffer[p] = string[i]; + } else { + char numstr[5]; + + snprintf(numstr, sizeof(numstr), "\\x%02x", + (unsigned int)(string[i]) & 0xff); + + if (!buffer) { + buffer = zalloc(i + (len - i) * 4 + 2); + if (!buffer) { + pr_err("failed to set unprintable string '%s'\n", string); + return bt_ctf_field_string_set_value(field, "UNPRINTABLE-STRING"); + } + if (i > 0) + strncpy(buffer, string, i); + } + strncat(buffer + p, numstr, 4); + p += 3; + } + } + + if (!buffer) + return bt_ctf_field_string_set_value(field, string); + err = bt_ctf_field_string_set_value(field, buffer); + free(buffer); + return err; +} + static int add_tracepoint_field_value(struct ctf_writer *cw, struct bt_ctf_event_class *event_class, struct bt_ctf_event *event, @@ -270,8 +308,7 @@ static int add_tracepoint_field_value(struct ctf_writer *cw, } if (flags & FIELD_IS_STRING) - ret = bt_ctf_field_string_set_value(field, - data + offset + i * len); + ret = string_set_value(field, data + offset + i * len); else { unsigned long long value_int; -- cgit v1.2.3 From 94abd778a7bb00ed5d00f56d9fbfcbf5b7c02a5c Mon Sep 17 00:00:00 2001 From: Jaap Jan Meijer Date: Thu, 12 May 2016 18:25:08 +0200 Subject: brcmfmac: add fallback for devices that do not report per-chain values If brcmf_cfg80211_get_station fails to determine the RSSI from the per-chain values get the value individually as a fallback. Fixes: 1f0dc59a6de9 ("brcmfmac: rework .get_station() callback") Signed-off-by: Jaap Jan Meijer Acked-by: Arend van Spriel Signed-off-by: Kalle Valo --- .../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index d0631b6cfd53..62f475e31077 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -2540,12 +2540,14 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, const u8 *mac, struct station_info *sinfo) { struct brcmf_if *ifp = netdev_priv(ndev); + struct brcmf_scb_val_le scb_val; s32 err = 0; struct brcmf_sta_info_le sta_info_le; u32 sta_flags; u32 is_tdls_peer; s32 total_rssi; s32 count_rssi; + int rssi; u32 i; brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac); @@ -2629,6 +2631,20 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); total_rssi /= count_rssi; sinfo->signal = total_rssi; + } else if (test_bit(BRCMF_VIF_STATUS_CONNECTED, + &ifp->vif->sme_state)) { + memset(&scb_val, 0, sizeof(scb_val)); + err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI, + &scb_val, sizeof(scb_val)); + if (err) { + brcmf_err("Could not get rssi (%d)\n", err); + goto done; + } else { + rssi = le32_to_cpu(scb_val.val); + sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); + sinfo->signal = rssi; + brcmf_dbg(CONN, "RSSI %d dBm\n", rssi); + } } } done: -- cgit v1.2.3 From de26859dcf363d520cc44e59f6dcaf20ebe0aadf Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 21 May 2016 11:50:35 -0500 Subject: rtlwifi: Fix scheduling while atomic error from commit 49f86ec21c01 Commit 49f86ec21c01 ("rtlwifi: Change long delays to sleeps") was correct for most cases; however, driver rtl8192ce calls the affected routines while in atomic context. The kernel bug output is as follows: BUG: scheduling while atomic: wpa_supplicant/627/0x00000002 [...] [] __schedule+0x899/0xad0 [] schedule+0x3c/0x90 [] schedule_hrtimeout_range_clock+0xa2/0x120 [] ? hrtimer_init+0x120/0x120 [] ? schedule_hrtimeout_range_clock+0x96/0x120 [] schedule_hrtimeout_range+0x13/0x20 [] usleep_range+0x4f/0x70 [] rtl_rfreg_delay+0x38/0x50 [rtlwifi] [] rtl92c_phy_config_rf_with_headerfile+0xc7/0xe0 [rtl8192ce] To fix this bug, three of the changes from delay to sleep are reverted. Unfortunately, one of the changes involves a delay of 50 msec. The calling code will be modified so that this long delay can be avoided; however, this change is being pushed now to fix the problem in kernel 4.6.0. Fixes: 49f86ec21c01 ("rtlwifi: Change long delays to sleeps") Reported-by: James Feeney Signed-off-by: Larry Finger Cc: James Feeney Cc: Stable [4.6+] Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c b/drivers/net/wireless/realtek/rtlwifi/core.c index 0f48048b8654..3a0faa8fe9d4 100644 --- a/drivers/net/wireless/realtek/rtlwifi/core.c +++ b/drivers/net/wireless/realtek/rtlwifi/core.c @@ -54,7 +54,7 @@ EXPORT_SYMBOL(channel5g_80m); void rtl_addr_delay(u32 addr) { if (addr == 0xfe) - msleep(50); + mdelay(50); else if (addr == 0xfd) msleep(5); else if (addr == 0xfc) @@ -75,7 +75,7 @@ void rtl_rfreg_delay(struct ieee80211_hw *hw, enum radio_path rfpath, u32 addr, rtl_addr_delay(addr); } else { rtl_set_rfreg(hw, rfpath, addr, mask, data); - usleep_range(1, 2); + udelay(1); } } EXPORT_SYMBOL(rtl_rfreg_delay); @@ -86,7 +86,7 @@ void rtl_bb_delay(struct ieee80211_hw *hw, u32 addr, u32 data) rtl_addr_delay(addr); } else { rtl_set_bbreg(hw, addr, MASKDWORD, data); - usleep_range(1, 2); + udelay(1); } } EXPORT_SYMBOL(rtl_bb_delay); -- cgit v1.2.3 From d43a41152f8e9e4c0d19850884d1fada076dee10 Mon Sep 17 00:00:00 2001 From: Gregor Boirie Date: Tue, 19 Apr 2016 11:18:33 +0200 Subject: iio:st_pressure: fix sampling gains (bring inline with ABI) Temperature channels report scaled samples in Celsius although expected as milli degree Celsius in Documentation/ABI/testing/sysfs-bus-iio. Gains are not implemented at all for LPS001WP pressure and temperature channels. This patch ensures that proper offsets and scales are exposed to userpace for both pressure and temperature channels. Also fix a NULL pointer exception when userspace reads content of sysfs scale attribute when gains are not defined. Signed-off-by: Gregor Boirie Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/st_pressure_core.c | 80 ++++++++++++++++++++------------- 1 file changed, 50 insertions(+), 30 deletions(-) diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 9e9b72a8f18f..257b58ac6779 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -28,15 +28,21 @@ #include #include "st_pressure.h" +#define MCELSIUS_PER_CELSIUS 1000 + +/* Default pressure sensitivity */ #define ST_PRESS_LSB_PER_MBAR 4096UL #define ST_PRESS_KPASCAL_NANO_SCALE (100000000UL / \ ST_PRESS_LSB_PER_MBAR) + +/* Default temperature sensitivity */ #define ST_PRESS_LSB_PER_CELSIUS 480UL -#define ST_PRESS_CELSIUS_NANO_SCALE (1000000000UL / \ - ST_PRESS_LSB_PER_CELSIUS) +#define ST_PRESS_MILLI_CELSIUS_OFFSET 42500UL + #define ST_PRESS_NUMBER_DATA_CHANNELS 1 /* FULLSCALE */ +#define ST_PRESS_FS_AVL_1100MB 1100 #define ST_PRESS_FS_AVL_1260MB 1260 #define ST_PRESS_1_OUT_XL_ADDR 0x28 @@ -54,9 +60,6 @@ #define ST_PRESS_LPS331AP_PW_MASK 0x80 #define ST_PRESS_LPS331AP_FS_ADDR 0x23 #define ST_PRESS_LPS331AP_FS_MASK 0x30 -#define ST_PRESS_LPS331AP_FS_AVL_1260_VAL 0x00 -#define ST_PRESS_LPS331AP_FS_AVL_1260_GAIN ST_PRESS_KPASCAL_NANO_SCALE -#define ST_PRESS_LPS331AP_FS_AVL_TEMP_GAIN ST_PRESS_CELSIUS_NANO_SCALE #define ST_PRESS_LPS331AP_BDU_ADDR 0x20 #define ST_PRESS_LPS331AP_BDU_MASK 0x04 #define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR 0x22 @@ -67,9 +70,14 @@ #define ST_PRESS_LPS331AP_OD_IRQ_ADDR 0x22 #define ST_PRESS_LPS331AP_OD_IRQ_MASK 0x40 #define ST_PRESS_LPS331AP_MULTIREAD_BIT true -#define ST_PRESS_LPS331AP_TEMP_OFFSET 42500 /* CUSTOM VALUES FOR LPS001WP SENSOR */ + +/* LPS001WP pressure resolution */ +#define ST_PRESS_LPS001WP_LSB_PER_MBAR 16UL +/* LPS001WP temperature resolution */ +#define ST_PRESS_LPS001WP_LSB_PER_CELSIUS 64UL + #define ST_PRESS_LPS001WP_WAI_EXP 0xba #define ST_PRESS_LPS001WP_ODR_ADDR 0x20 #define ST_PRESS_LPS001WP_ODR_MASK 0x30 @@ -78,6 +86,8 @@ #define ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL 0x03 #define ST_PRESS_LPS001WP_PW_ADDR 0x20 #define ST_PRESS_LPS001WP_PW_MASK 0x40 +#define ST_PRESS_LPS001WP_FS_AVL_PRESS_GAIN \ + (100000000UL / ST_PRESS_LPS001WP_LSB_PER_MBAR) #define ST_PRESS_LPS001WP_BDU_ADDR 0x20 #define ST_PRESS_LPS001WP_BDU_MASK 0x04 #define ST_PRESS_LPS001WP_MULTIREAD_BIT true @@ -94,11 +104,6 @@ #define ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL 0x04 #define ST_PRESS_LPS25H_PW_ADDR 0x20 #define ST_PRESS_LPS25H_PW_MASK 0x80 -#define ST_PRESS_LPS25H_FS_ADDR 0x00 -#define ST_PRESS_LPS25H_FS_MASK 0x00 -#define ST_PRESS_LPS25H_FS_AVL_1260_VAL 0x00 -#define ST_PRESS_LPS25H_FS_AVL_1260_GAIN ST_PRESS_KPASCAL_NANO_SCALE -#define ST_PRESS_LPS25H_FS_AVL_TEMP_GAIN ST_PRESS_CELSIUS_NANO_SCALE #define ST_PRESS_LPS25H_BDU_ADDR 0x20 #define ST_PRESS_LPS25H_BDU_MASK 0x04 #define ST_PRESS_LPS25H_DRDY_IRQ_ADDR 0x23 @@ -109,7 +114,6 @@ #define ST_PRESS_LPS25H_OD_IRQ_ADDR 0x22 #define ST_PRESS_LPS25H_OD_IRQ_MASK 0x40 #define ST_PRESS_LPS25H_MULTIREAD_BIT true -#define ST_PRESS_LPS25H_TEMP_OFFSET 42500 #define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28 #define ST_TEMP_LPS25H_OUT_L_ADDR 0x2b @@ -161,7 +165,9 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = { .storagebits = 16, .endianness = IIO_LE, }, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), .modified = 0, }, { @@ -177,7 +183,7 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = { }, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_SCALE), .modified = 0, }, IIO_CHAN_SOFT_TIMESTAMP(1) @@ -212,11 +218,14 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .addr = ST_PRESS_LPS331AP_FS_ADDR, .mask = ST_PRESS_LPS331AP_FS_MASK, .fs_avl = { + /* + * Pressure and temperature sensitivity values + * as defined in table 3 of LPS331AP datasheet. + */ [0] = { .num = ST_PRESS_FS_AVL_1260MB, - .value = ST_PRESS_LPS331AP_FS_AVL_1260_VAL, - .gain = ST_PRESS_LPS331AP_FS_AVL_1260_GAIN, - .gain2 = ST_PRESS_LPS331AP_FS_AVL_TEMP_GAIN, + .gain = ST_PRESS_KPASCAL_NANO_SCALE, + .gain2 = ST_PRESS_LSB_PER_CELSIUS, }, }, }, @@ -261,7 +270,17 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, }, .fs = { - .addr = 0, + .fs_avl = { + /* + * Pressure and temperature resolution values + * as defined in table 3 of LPS001WP datasheet. + */ + [0] = { + .num = ST_PRESS_FS_AVL_1100MB, + .gain = ST_PRESS_LPS001WP_FS_AVL_PRESS_GAIN, + .gain2 = ST_PRESS_LPS001WP_LSB_PER_CELSIUS, + }, + }, }, .bdu = { .addr = ST_PRESS_LPS001WP_BDU_ADDR, @@ -298,14 +317,15 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, }, .fs = { - .addr = ST_PRESS_LPS25H_FS_ADDR, - .mask = ST_PRESS_LPS25H_FS_MASK, .fs_avl = { + /* + * Pressure and temperature sensitivity values + * as defined in table 3 of LPS25H datasheet. + */ [0] = { .num = ST_PRESS_FS_AVL_1260MB, - .value = ST_PRESS_LPS25H_FS_AVL_1260_VAL, - .gain = ST_PRESS_LPS25H_FS_AVL_1260_GAIN, - .gain2 = ST_PRESS_LPS25H_FS_AVL_TEMP_GAIN, + .gain = ST_PRESS_KPASCAL_NANO_SCALE, + .gain2 = ST_PRESS_LSB_PER_CELSIUS, }, }, }, @@ -364,26 +384,26 @@ static int st_press_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: - *val = 0; - switch (ch->type) { case IIO_PRESSURE: + *val = 0; *val2 = press_data->current_fullscale->gain; - break; + return IIO_VAL_INT_PLUS_NANO; case IIO_TEMP: + *val = MCELSIUS_PER_CELSIUS; *val2 = press_data->current_fullscale->gain2; - break; + return IIO_VAL_FRACTIONAL; default: err = -EINVAL; goto read_error; } - return IIO_VAL_INT_PLUS_NANO; case IIO_CHAN_INFO_OFFSET: switch (ch->type) { case IIO_TEMP: - *val = 425; - *val2 = 10; + *val = ST_PRESS_MILLI_CELSIUS_OFFSET * + press_data->current_fullscale->gain2; + *val2 = MCELSIUS_PER_CELSIUS; break; default: err = -EINVAL; -- cgit v1.2.3 From d11c2a0de2824395656cf8ed15811580c9dd38aa Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 28 May 2016 21:21:31 -0700 Subject: sparc: Harden signal return frame checks. All signal frames must be at least 16-byte aligned, because that is the alignment we explicitly create when we build signal return stack frames. All stack pointers must be at least 8-byte aligned. Signed-off-by: David S. Miller --- arch/sparc/kernel/signal32.c | 46 +++++++++++++++++++++++++++--------------- arch/sparc/kernel/signal_32.c | 41 +++++++++++++++++++++++-------------- arch/sparc/kernel/signal_64.c | 31 ++++++++++++++++++---------- arch/sparc/kernel/sigutil_32.c | 9 ++++++++- arch/sparc/kernel/sigutil_64.c | 10 +++++++-- 5 files changed, 92 insertions(+), 45 deletions(-) diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c index 3c25241fa5cb..91cc2f4ae4d9 100644 --- a/arch/sparc/kernel/signal32.c +++ b/arch/sparc/kernel/signal32.c @@ -138,12 +138,24 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) return 0; } +/* Checks if the fp is valid. We always build signal frames which are + * 16-byte aligned, therefore we can always enforce that the restore + * frame has that property as well. + */ +static bool invalid_frame_pointer(void __user *fp, int fplen) +{ + if ((((unsigned long) fp) & 15) || + ((unsigned long)fp) > 0x100000000ULL - fplen) + return true; + return false; +} + void do_sigreturn32(struct pt_regs *regs) { struct signal_frame32 __user *sf; compat_uptr_t fpu_save; compat_uptr_t rwin_save; - unsigned int psr; + unsigned int psr, ufp; unsigned int pc, npc; sigset_t set; compat_sigset_t seta; @@ -158,11 +170,16 @@ void do_sigreturn32(struct pt_regs *regs) sf = (struct signal_frame32 __user *) regs->u_regs[UREG_FP]; /* 1. Make sure we are not getting garbage from the user */ - if (!access_ok(VERIFY_READ, sf, sizeof(*sf)) || - (((unsigned long) sf) & 3)) + if (invalid_frame_pointer(sf, sizeof(*sf))) + goto segv; + + if (get_user(ufp, &sf->info.si_regs.u_regs[UREG_FP])) + goto segv; + + if (ufp & 0x7) goto segv; - if (get_user(pc, &sf->info.si_regs.pc) || + if (__get_user(pc, &sf->info.si_regs.pc) || __get_user(npc, &sf->info.si_regs.npc)) goto segv; @@ -227,7 +244,7 @@ segv: asmlinkage void do_rt_sigreturn32(struct pt_regs *regs) { struct rt_signal_frame32 __user *sf; - unsigned int psr, pc, npc; + unsigned int psr, pc, npc, ufp; compat_uptr_t fpu_save; compat_uptr_t rwin_save; sigset_t set; @@ -242,11 +259,16 @@ asmlinkage void do_rt_sigreturn32(struct pt_regs *regs) sf = (struct rt_signal_frame32 __user *) regs->u_regs[UREG_FP]; /* 1. Make sure we are not getting garbage from the user */ - if (!access_ok(VERIFY_READ, sf, sizeof(*sf)) || - (((unsigned long) sf) & 3)) + if (invalid_frame_pointer(sf, sizeof(*sf))) goto segv; - if (get_user(pc, &sf->regs.pc) || + if (get_user(ufp, &sf->regs.u_regs[UREG_FP])) + goto segv; + + if (ufp & 0x7) + goto segv; + + if (__get_user(pc, &sf->regs.pc) || __get_user(npc, &sf->regs.npc)) goto segv; @@ -307,14 +329,6 @@ segv: force_sig(SIGSEGV, current); } -/* Checks if the fp is valid */ -static int invalid_frame_pointer(void __user *fp, int fplen) -{ - if ((((unsigned long) fp) & 7) || ((unsigned long)fp) > 0x100000000ULL - fplen) - return 1; - return 0; -} - static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, unsigned long framesize) { unsigned long sp; diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c index 52aa5e4ce5e7..c3c12efe0bc0 100644 --- a/arch/sparc/kernel/signal_32.c +++ b/arch/sparc/kernel/signal_32.c @@ -60,10 +60,22 @@ struct rt_signal_frame { #define SF_ALIGNEDSZ (((sizeof(struct signal_frame) + 7) & (~7))) #define RT_ALIGNEDSZ (((sizeof(struct rt_signal_frame) + 7) & (~7))) +/* Checks if the fp is valid. We always build signal frames which are + * 16-byte aligned, therefore we can always enforce that the restore + * frame has that property as well. + */ +static inline bool invalid_frame_pointer(void __user *fp, int fplen) +{ + if ((((unsigned long) fp) & 15) || !__access_ok((unsigned long)fp, fplen)) + return true; + + return false; +} + asmlinkage void do_sigreturn(struct pt_regs *regs) { + unsigned long up_psr, pc, npc, ufp; struct signal_frame __user *sf; - unsigned long up_psr, pc, npc; sigset_t set; __siginfo_fpu_t __user *fpu_save; __siginfo_rwin_t __user *rwin_save; @@ -77,10 +89,13 @@ asmlinkage void do_sigreturn(struct pt_regs *regs) sf = (struct signal_frame __user *) regs->u_regs[UREG_FP]; /* 1. Make sure we are not getting garbage from the user */ - if (!access_ok(VERIFY_READ, sf, sizeof(*sf))) + if (!invalid_frame_pointer(sf, sizeof(*sf))) + goto segv_and_exit; + + if (get_user(ufp, &sf->info.si_regs.u_regs[UREG_FP])) goto segv_and_exit; - if (((unsigned long) sf) & 3) + if (ufp & 0x7) goto segv_and_exit; err = __get_user(pc, &sf->info.si_regs.pc); @@ -127,7 +142,7 @@ segv_and_exit: asmlinkage void do_rt_sigreturn(struct pt_regs *regs) { struct rt_signal_frame __user *sf; - unsigned int psr, pc, npc; + unsigned int psr, pc, npc, ufp; __siginfo_fpu_t __user *fpu_save; __siginfo_rwin_t __user *rwin_save; sigset_t set; @@ -135,8 +150,13 @@ asmlinkage void do_rt_sigreturn(struct pt_regs *regs) synchronize_user_stack(); sf = (struct rt_signal_frame __user *) regs->u_regs[UREG_FP]; - if (!access_ok(VERIFY_READ, sf, sizeof(*sf)) || - (((unsigned long) sf) & 0x03)) + if (!invalid_frame_pointer(sf, sizeof(*sf))) + goto segv; + + if (get_user(ufp, &sf->regs.u_regs[UREG_FP])) + goto segv; + + if (ufp & 0x7) goto segv; err = __get_user(pc, &sf->regs.pc); @@ -178,15 +198,6 @@ segv: force_sig(SIGSEGV, current); } -/* Checks if the fp is valid */ -static inline int invalid_frame_pointer(void __user *fp, int fplen) -{ - if ((((unsigned long) fp) & 7) || !__access_ok((unsigned long)fp, fplen)) - return 1; - - return 0; -} - static inline void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, unsigned long framesize) { unsigned long sp = regs->u_regs[UREG_FP]; diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c index 39aaec173f66..5ee930c48f4c 100644 --- a/arch/sparc/kernel/signal_64.c +++ b/arch/sparc/kernel/signal_64.c @@ -234,6 +234,17 @@ do_sigsegv: goto out; } +/* Checks if the fp is valid. We always build rt signal frames which + * are 16-byte aligned, therefore we can always enforce that the + * restore frame has that property as well. + */ +static bool invalid_frame_pointer(void __user *fp) +{ + if (((unsigned long) fp) & 15) + return true; + return false; +} + struct rt_signal_frame { struct sparc_stackf ss; siginfo_t info; @@ -246,8 +257,8 @@ struct rt_signal_frame { void do_rt_sigreturn(struct pt_regs *regs) { + unsigned long tpc, tnpc, tstate, ufp; struct rt_signal_frame __user *sf; - unsigned long tpc, tnpc, tstate; __siginfo_fpu_t __user *fpu_save; __siginfo_rwin_t __user *rwin_save; sigset_t set; @@ -261,10 +272,16 @@ void do_rt_sigreturn(struct pt_regs *regs) (regs->u_regs [UREG_FP] + STACK_BIAS); /* 1. Make sure we are not getting garbage from the user */ - if (((unsigned long) sf) & 3) + if (invalid_frame_pointer(sf)) + goto segv; + + if (get_user(ufp, &sf->regs.u_regs[UREG_FP])) goto segv; - err = get_user(tpc, &sf->regs.tpc); + if ((ufp + STACK_BIAS) & 0x7) + goto segv; + + err = __get_user(tpc, &sf->regs.tpc); err |= __get_user(tnpc, &sf->regs.tnpc); if (test_thread_flag(TIF_32BIT)) { tpc &= 0xffffffff; @@ -308,14 +325,6 @@ segv: force_sig(SIGSEGV, current); } -/* Checks if the fp is valid */ -static int invalid_frame_pointer(void __user *fp) -{ - if (((unsigned long) fp) & 15) - return 1; - return 0; -} - static inline void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, unsigned long framesize) { unsigned long sp = regs->u_regs[UREG_FP] + STACK_BIAS; diff --git a/arch/sparc/kernel/sigutil_32.c b/arch/sparc/kernel/sigutil_32.c index 0f6eebe71e6c..e5fe8cef9a69 100644 --- a/arch/sparc/kernel/sigutil_32.c +++ b/arch/sparc/kernel/sigutil_32.c @@ -48,6 +48,10 @@ int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) { int err; + + if (((unsigned long) fpu) & 3) + return -EFAULT; + #ifdef CONFIG_SMP if (test_tsk_thread_flag(current, TIF_USEDFPU)) regs->psr &= ~PSR_EF; @@ -97,7 +101,10 @@ int restore_rwin_state(__siginfo_rwin_t __user *rp) struct thread_info *t = current_thread_info(); int i, wsaved, err; - __get_user(wsaved, &rp->wsaved); + if (((unsigned long) rp) & 3) + return -EFAULT; + + get_user(wsaved, &rp->wsaved); if (wsaved > NSWINS) return -EFAULT; diff --git a/arch/sparc/kernel/sigutil_64.c b/arch/sparc/kernel/sigutil_64.c index 387834a9c56a..36aadcbeac69 100644 --- a/arch/sparc/kernel/sigutil_64.c +++ b/arch/sparc/kernel/sigutil_64.c @@ -37,7 +37,10 @@ int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) unsigned long fprs; int err; - err = __get_user(fprs, &fpu->si_fprs); + if (((unsigned long) fpu) & 7) + return -EFAULT; + + err = get_user(fprs, &fpu->si_fprs); fprs_write(0); regs->tstate &= ~TSTATE_PEF; if (fprs & FPRS_DL) @@ -72,7 +75,10 @@ int restore_rwin_state(__siginfo_rwin_t __user *rp) struct thread_info *t = current_thread_info(); int i, wsaved, err; - __get_user(wsaved, &rp->wsaved); + if (((unsigned long) rp) & 7) + return -EFAULT; + + get_user(wsaved, &rp->wsaved); if (wsaved > NSWINS) return -EFAULT; -- cgit v1.2.3 From 09bc0ddaab6cab0fa95a67d5535ec772e2671193 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Thu, 26 May 2016 19:55:06 -0700 Subject: iio: humidity: hdc100x: fix IIO_TEMP channel reporting IIO_TEMP channel was being incorrectly reported back as Celsius when it should have been milliCelsius. This is via an incorrect scale value being returned to userspace. Signed-off-by: Matt Ranostay Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/hdc100x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c index 59aa1cbdc2fd..30709838dcdc 100644 --- a/drivers/iio/humidity/hdc100x.c +++ b/drivers/iio/humidity/hdc100x.c @@ -211,7 +211,7 @@ static int hdc100x_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SCALE: if (chan->type == IIO_TEMP) { - *val = 165; + *val = 165000; *val2 = 65536 >> 2; return IIO_VAL_FRACTIONAL; } else { -- cgit v1.2.3 From 13c27e946ddc0e19f3d8b307b14cd8053fcb4844 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 25 May 2016 09:40:26 +0200 Subject: iio: bh1780: dereference the client properly The code in runtime_[suspend|resume] was assuming that the i2c client data was the bh1780 state container, but it contains the IIO device. So first dereference the IIO device from the i2c client, then get the state container using the iio_priv() call. Fixes: 1f0477f18306 ("iio: light: new driver for the ROHM BH1780") Signed-off-by: Linus Walleij Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/light/bh1780.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/iio/light/bh1780.c b/drivers/iio/light/bh1780.c index f83595334ff1..5fd432df2c8f 100644 --- a/drivers/iio/light/bh1780.c +++ b/drivers/iio/light/bh1780.c @@ -226,7 +226,8 @@ static int bh1780_remove(struct i2c_client *client) static int bh1780_runtime_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); - struct bh1780_data *bh1780 = i2c_get_clientdata(client); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct bh1780_data *bh1780 = iio_priv(indio_dev); int ret; ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_POFF); @@ -241,7 +242,8 @@ static int bh1780_runtime_suspend(struct device *dev) static int bh1780_runtime_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); - struct bh1780_data *bh1780 = i2c_get_clientdata(client); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct bh1780_data *bh1780 = iio_priv(indio_dev); int ret; ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_PON); -- cgit v1.2.3 From 0dd09ca419d712d315ffd864158f515e6c64261a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 25 May 2016 09:40:27 +0200 Subject: iio: light: bh1780: assign a static name Using the struct i2c_device->id field for naming the light sensor is a bad idea: when booting from the pure device tree this is NULL and that causes the device not to have the "name" property in sysfs and that in turn confuses the "lsiio" command to stop listing devices. So instead of using the device .id, use the hard string "bh1780", which works just fine. Fixes: 1f0477f18306 ("iio: light: new driver for the ROHM BH1780") Signed-off-by: Linus Walleij Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/light/bh1780.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/light/bh1780.c b/drivers/iio/light/bh1780.c index 5fd432df2c8f..b54dcba05a82 100644 --- a/drivers/iio/light/bh1780.c +++ b/drivers/iio/light/bh1780.c @@ -187,7 +187,7 @@ static int bh1780_probe(struct i2c_client *client, indio_dev->dev.parent = &client->dev; indio_dev->info = &bh1780_info; - indio_dev->name = id->name; + indio_dev->name = "bh1780"; indio_dev->channels = bh1780_channels; indio_dev->num_channels = ARRAY_SIZE(bh1780_channels); indio_dev->modes = INDIO_DIRECT_MODE; -- cgit v1.2.3 From 65925b65ed98ffdb277cf5ea1af45731dac0b30b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 21 May 2016 20:43:16 +0200 Subject: iio: st_sensors: switch to a threaded interrupt commit 98ad8b41f58dff6b30713d7f09ae3834b8df7ded ("iio: st_sensors: verify interrupt event to status") caused a regression when reading ST sensors from a HRTimer trigger rather than the intrinsic interrupts: the HRTimer may trigger faster than the sensor provides new values, and as the check against new values available as a cause of the interrupt trigger was done in the poll function, this would bail out of the HRTimer interrupt with IRQ_NONE. So clearly we need to only check the new values available from the proper interrupt handler and not from the poll function, which should rather just read the raw values from the registers, put them into the buffer and be happy. To achieve this: switch the ST Sensors over to using a true threaded interrupt handler. In the interrupt thread, check if new values are available, else yield to the (potential) next device on the same interrupt line to check the registers. If the interrupt was ours, proceed to poll the values. Instead of relying on iio_trigger_generic_data_rdy_poll() as a top half to wake up the thread that polls the sensor for new data, have the thread call iio_trigger_poll_chained() after determining that is is the proper source of the interrupt. This is modelled on drivers/iio/accel/mma8452.c which is already using a properly threaded interrupt handler. In order to get the same precision in timestamps as previously, where samples would be timestamped in the poll function pf->timestamp when calling iio_trigger_generic_data_rdy_poll() we introduce a local timestamp in the sensor data, set it in the top half (fastpath) of the interrupt handler and provide that to the core when calling iio_push_to_buffers_with_timestamp(). Additionally: if the active scanmask is not set for the sensor no IRQs should be enabled and we need to bail out with IRQ_NONE. This can happen if spurious IRQs fire when installing the threaded interrupt handler. Tested with hard interrupt triggers on LIS331DL, then also tested with hrtimers on the same sensor by creating a 75Hz HRTimer and using it to poll the sensor. Signed-off-by: Linus Walleij Cc: Giuseppe Barba Cc: Denis Ciocca Reported-by: Crestez Dan Leonard Tested-by: Crestez Dan Leonard Tested-by: Jonathan Cameron Fixes: 97865fe41322 ("iio: st_sensors: verify interrupt event to status") Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_buffer.c | 2 +- drivers/iio/accel/st_accel_core.c | 1 + drivers/iio/common/st_sensors/st_sensors_buffer.c | 25 ++---- drivers/iio/common/st_sensors/st_sensors_core.c | 3 + drivers/iio/common/st_sensors/st_sensors_trigger.c | 88 +++++++++++++++++++++- drivers/iio/gyro/st_gyro_buffer.c | 2 +- drivers/iio/gyro/st_gyro_core.c | 1 + drivers/iio/magnetometer/st_magn_buffer.c | 2 +- drivers/iio/magnetometer/st_magn_core.c | 1 + drivers/iio/pressure/st_pressure_buffer.c | 2 +- drivers/iio/pressure/st_pressure_core.c | 1 + include/linux/iio/common/st_sensors.h | 9 ++- 12 files changed, 111 insertions(+), 26 deletions(-) diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c index a1e642ee13d6..7fddc137e91e 100644 --- a/drivers/iio/accel/st_accel_buffer.c +++ b/drivers/iio/accel/st_accel_buffer.c @@ -91,7 +91,7 @@ static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = { int st_accel_allocate_ring(struct iio_dev *indio_dev) { - return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + return iio_triggered_buffer_setup(indio_dev, NULL, &st_sensors_trigger_handler, &st_accel_buffer_setup_ops); } diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index dc73f2d85e6d..4d95bfc4786c 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -741,6 +741,7 @@ static const struct iio_info accel_info = { static const struct iio_trigger_ops st_accel_trigger_ops = { .owner = THIS_MODULE, .set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE, + .validate_device = st_sensors_validate_device, }; #define ST_ACCEL_TRIGGER_OPS (&st_accel_trigger_ops) #else diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c index c55898543a47..f1693dbebb8a 100644 --- a/drivers/iio/common/st_sensors/st_sensors_buffer.c +++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c @@ -57,31 +57,20 @@ irqreturn_t st_sensors_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct st_sensor_data *sdata = iio_priv(indio_dev); + s64 timestamp; - /* If we have a status register, check if this IRQ came from us */ - if (sdata->sensor_settings->drdy_irq.addr_stat_drdy) { - u8 status; - - len = sdata->tf->read_byte(&sdata->tb, sdata->dev, - sdata->sensor_settings->drdy_irq.addr_stat_drdy, - &status); - if (len < 0) - dev_err(sdata->dev, "could not read channel status\n"); - - /* - * If this was not caused by any channels on this sensor, - * return IRQ_NONE - */ - if (!(status & (u8)indio_dev->active_scan_mask[0])) - return IRQ_NONE; - } + /* If we do timetamping here, do it before reading the values */ + if (sdata->hw_irq_trigger) + timestamp = sdata->hw_timestamp; + else + timestamp = iio_get_time_ns(); len = st_sensors_get_buffer_element(indio_dev, sdata->buffer_data); if (len < 0) goto st_sensors_get_buffer_element_error; iio_push_to_buffers_with_timestamp(indio_dev, sdata->buffer_data, - pf->timestamp); + timestamp); st_sensors_get_buffer_element_error: iio_trigger_notify_done(indio_dev->trig); diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index dffe00692169..928ee68fcc5f 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -424,6 +424,9 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable) else drdy_mask = sdata->sensor_settings->drdy_irq.mask_int2; + /* Flag to the poll function that the hardware trigger is in use */ + sdata->hw_irq_trigger = enable; + /* Enable/Disable the interrupt generator for data ready. */ err = st_sensors_write_data_with_mask(indio_dev, sdata->sensor_settings->drdy_irq.addr, diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index da72279fcf99..1f59bcc0f143 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -17,6 +17,73 @@ #include #include "st_sensors_core.h" +/** + * st_sensors_irq_handler() - top half of the IRQ-based triggers + * @irq: irq number + * @p: private handler data + */ +irqreturn_t st_sensors_irq_handler(int irq, void *p) +{ + struct iio_trigger *trig = p; + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct st_sensor_data *sdata = iio_priv(indio_dev); + + /* Get the time stamp as close in time as possible */ + sdata->hw_timestamp = iio_get_time_ns(); + return IRQ_WAKE_THREAD; +} + +/** + * st_sensors_irq_thread() - bottom half of the IRQ-based triggers + * @irq: irq number + * @p: private handler data + */ +irqreturn_t st_sensors_irq_thread(int irq, void *p) +{ + struct iio_trigger *trig = p; + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct st_sensor_data *sdata = iio_priv(indio_dev); + int ret; + + /* + * If this trigger is backed by a hardware interrupt and we have a + * status register, check if this IRQ came from us + */ + if (sdata->sensor_settings->drdy_irq.addr_stat_drdy) { + u8 status; + + ret = sdata->tf->read_byte(&sdata->tb, sdata->dev, + sdata->sensor_settings->drdy_irq.addr_stat_drdy, + &status); + if (ret < 0) { + dev_err(sdata->dev, "could not read channel status\n"); + goto out_poll; + } + /* + * the lower bits of .active_scan_mask[0] is directly mapped + * to the channels on the sensor: either bit 0 for + * one-dimensional sensors, or e.g. x,y,z for accelerometers, + * gyroscopes or magnetometers. No sensor use more than 3 + * channels, so cut the other status bits here. + */ + status &= 0x07; + + /* + * If this was not caused by any channels on this sensor, + * return IRQ_NONE + */ + if (!indio_dev->active_scan_mask) + return IRQ_NONE; + if (!(status & (u8)indio_dev->active_scan_mask[0])) + return IRQ_NONE; + } + +out_poll: + /* It's our IRQ: proceed to handle the register polling */ + iio_trigger_poll_chained(p); + return IRQ_HANDLED; +} + int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops) { @@ -77,9 +144,12 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, sdata->sensor_settings->drdy_irq.addr_stat_drdy) irq_trig |= IRQF_SHARED; - err = request_threaded_irq(irq, - iio_trigger_generic_data_rdy_poll, - NULL, + /* Let's create an interrupt thread masking the hard IRQ here */ + irq_trig |= IRQF_ONESHOT; + + err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev), + st_sensors_irq_handler, + st_sensors_irq_thread, irq_trig, sdata->trig->name, sdata->trig); @@ -119,6 +189,18 @@ void st_sensors_deallocate_trigger(struct iio_dev *indio_dev) } EXPORT_SYMBOL(st_sensors_deallocate_trigger); +int st_sensors_validate_device(struct iio_trigger *trig, + struct iio_dev *indio_dev) +{ + struct iio_dev *indio = iio_trigger_get_drvdata(trig); + + if (indio != indio_dev) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL(st_sensors_validate_device); + MODULE_AUTHOR("Denis Ciocca "); MODULE_DESCRIPTION("STMicroelectronics ST-sensors trigger"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/gyro/st_gyro_buffer.c b/drivers/iio/gyro/st_gyro_buffer.c index d67b17b6a7aa..a5377044e42f 100644 --- a/drivers/iio/gyro/st_gyro_buffer.c +++ b/drivers/iio/gyro/st_gyro_buffer.c @@ -91,7 +91,7 @@ static const struct iio_buffer_setup_ops st_gyro_buffer_setup_ops = { int st_gyro_allocate_ring(struct iio_dev *indio_dev) { - return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + return iio_triggered_buffer_setup(indio_dev, NULL, &st_sensors_trigger_handler, &st_gyro_buffer_setup_ops); } diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 52a3c87c375c..a8012955a1f6 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -409,6 +409,7 @@ static const struct iio_info gyro_info = { static const struct iio_trigger_ops st_gyro_trigger_ops = { .owner = THIS_MODULE, .set_trigger_state = ST_GYRO_TRIGGER_SET_STATE, + .validate_device = st_sensors_validate_device, }; #define ST_GYRO_TRIGGER_OPS (&st_gyro_trigger_ops) #else diff --git a/drivers/iio/magnetometer/st_magn_buffer.c b/drivers/iio/magnetometer/st_magn_buffer.c index ecd3bd0a9769..0a9e8fadfa9d 100644 --- a/drivers/iio/magnetometer/st_magn_buffer.c +++ b/drivers/iio/magnetometer/st_magn_buffer.c @@ -82,7 +82,7 @@ static const struct iio_buffer_setup_ops st_magn_buffer_setup_ops = { int st_magn_allocate_ring(struct iio_dev *indio_dev) { - return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + return iio_triggered_buffer_setup(indio_dev, NULL, &st_sensors_trigger_handler, &st_magn_buffer_setup_ops); } diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index 62036d2a9956..8250fc322c56 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -572,6 +572,7 @@ static const struct iio_info magn_info = { static const struct iio_trigger_ops st_magn_trigger_ops = { .owner = THIS_MODULE, .set_trigger_state = ST_MAGN_TRIGGER_SET_STATE, + .validate_device = st_sensors_validate_device, }; #define ST_MAGN_TRIGGER_OPS (&st_magn_trigger_ops) #else diff --git a/drivers/iio/pressure/st_pressure_buffer.c b/drivers/iio/pressure/st_pressure_buffer.c index 2ff53f222352..99468d0a64e7 100644 --- a/drivers/iio/pressure/st_pressure_buffer.c +++ b/drivers/iio/pressure/st_pressure_buffer.c @@ -82,7 +82,7 @@ static const struct iio_buffer_setup_ops st_press_buffer_setup_ops = { int st_press_allocate_ring(struct iio_dev *indio_dev) { - return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + return iio_triggered_buffer_setup(indio_dev, NULL, &st_sensors_trigger_handler, &st_press_buffer_setup_ops); } diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 257b58ac6779..92a118c3c4ac 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -445,6 +445,7 @@ static const struct iio_info press_info = { static const struct iio_trigger_ops st_press_trigger_ops = { .owner = THIS_MODULE, .set_trigger_state = ST_PRESS_TRIGGER_SET_STATE, + .validate_device = st_sensors_validate_device, }; #define ST_PRESS_TRIGGER_OPS (&st_press_trigger_ops) #else diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index d029ffac0d69..99403b19092f 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -223,6 +223,8 @@ struct st_sensor_settings { * @get_irq_data_ready: Function to get the IRQ used for data ready signal. * @tf: Transfer function structure used by I/O operations. * @tb: Transfer buffers and mutex used by I/O operations. + * @hw_irq_trigger: if we're using the hardware interrupt on the sensor. + * @hw_timestamp: Latest timestamp from the interrupt handler, when in use. */ struct st_sensor_data { struct device *dev; @@ -247,6 +249,9 @@ struct st_sensor_data { const struct st_sensor_transfer_function *tf; struct st_sensor_transfer_buffer tb; + + bool hw_irq_trigger; + s64 hw_timestamp; }; #ifdef CONFIG_IIO_BUFFER @@ -260,7 +265,8 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops); void st_sensors_deallocate_trigger(struct iio_dev *indio_dev); - +int st_sensors_validate_device(struct iio_trigger *trig, + struct iio_dev *indio_dev); #else static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops) @@ -271,6 +277,7 @@ static inline void st_sensors_deallocate_trigger(struct iio_dev *indio_dev) { return; } +#define st_sensors_validate_device NULL #endif int st_sensors_init_sensor(struct iio_dev *indio_dev, -- cgit v1.2.3 From ff05916f94f912b25e8efcf9b02c10d481977bab Mon Sep 17 00:00:00 2001 From: Crestez Dan Leonard Date: Fri, 13 May 2016 21:43:33 +0300 Subject: iio: st_sensors: Init trigger before irq request This fixes a possible race where an interrupt arrives before complete initialization and crashes because iio_trigger_get_drvdata returns NULL. Cc: Giuseppe Barba Cc: Denis Ciocca Signed-off-by: Crestez Dan Leonard Reviewed-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/common/st_sensors/st_sensors_trigger.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index 1f59bcc0f143..296e4ff19ae8 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -97,6 +97,10 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, return -ENOMEM; } + iio_trigger_set_drvdata(sdata->trig, indio_dev); + sdata->trig->ops = trigger_ops; + sdata->trig->dev.parent = sdata->dev; + irq = sdata->get_irq_data_ready(indio_dev); irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); /* @@ -158,10 +162,6 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, goto iio_trigger_free; } - iio_trigger_set_drvdata(sdata->trig, indio_dev); - sdata->trig->ops = trigger_ops; - sdata->trig->dev.parent = sdata->dev; - err = iio_trigger_register(sdata->trig); if (err < 0) { dev_err(&indio_dev->dev, "failed to register iio trigger.\n"); -- cgit v1.2.3 From 99147606155f09feccac67c65387dc62260b749b Mon Sep 17 00:00:00 2001 From: Crestez Dan Leonard Date: Fri, 13 May 2016 21:43:34 +0300 Subject: iio: st_sensors: Disable DRDY at init time This fixes odd behavior after reboot. The fact that we set the device to powerdown mode is not sufficient to prevent DRDY being active because we might still have an unread sample. Even if powerdown was sufficient keeping DRDY disabled while trigger is not active is a good idea. Cc: Giuseppe Barba Cc: Denis Ciocca Signed-off-by: Crestez Dan Leonard Reviewed-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/common/st_sensors/st_sensors_core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 928ee68fcc5f..9e59c90f6a8d 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -363,6 +363,11 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev, if (err < 0) return err; + /* Disable DRDY, this might be still be enabled after reboot. */ + err = st_sensors_set_dataready_irq(indio_dev, false); + if (err < 0) + return err; + if (sdata->current_fullscale) { err = st_sensors_set_fullscale(indio_dev, sdata->current_fullscale->num); -- cgit v1.2.3 From 7cafc0b8bf130f038b0ec2dcdd6a9de6dc59b65a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 28 May 2016 20:41:12 -0700 Subject: sparc64: Fix return from trap window fill crashes. We must handle data access exception as well as memory address unaligned exceptions from return from trap window fill faults, not just normal TLB misses. Otherwise we can get an OOPS that looks like this: ld-linux.so.2(36808): Kernel bad sw trap 5 [#1] CPU: 1 PID: 36808 Comm: ld-linux.so.2 Not tainted 4.6.0 #34 task: fff8000303be5c60 ti: fff8000301344000 task.ti: fff8000301344000 TSTATE: 0000004410001601 TPC: 0000000000a1a784 TNPC: 0000000000a1a788 Y: 00000002 Not tainted TPC: g0: fff8000024fc8248 g1: 0000000000db04dc g2: 0000000000000000 g3: 0000000000000001 g4: fff8000303be5c60 g5: fff800030e672000 g6: fff8000301344000 g7: 0000000000000001 o0: 0000000000b95ee8 o1: 000000000000012b o2: 0000000000000000 o3: 0000000200b9b358 o4: 0000000000000000 o5: fff8000301344040 sp: fff80003013475c1 ret_pc: 0000000000a1a77c RPC: l0: 00000000000007ff l1: 0000000000000000 l2: 000000000000005f l3: 0000000000000000 l4: fff8000301347e98 l5: fff8000024ff3060 l6: 0000000000000000 l7: 0000000000000000 i0: fff8000301347f60 i1: 0000000000102400 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000000000 i6: fff80003013476a1 i7: 0000000000404d4c I7: Call Trace: [0000000000404d4c] user_rtt_fill_fixup+0x6c/0x7c The window trap handlers are slightly clever, the trap table entries for them are composed of two pieces of code. First comes the code that actually performs the window fill or spill trap handling, and then there are three instructions at the end which are for exception processing. The userland register window fill handler is: add %sp, STACK_BIAS + 0x00, %g1; \ ldxa [%g1 + %g0] ASI, %l0; \ mov 0x08, %g2; \ mov 0x10, %g3; \ ldxa [%g1 + %g2] ASI, %l1; \ mov 0x18, %g5; \ ldxa [%g1 + %g3] ASI, %l2; \ ldxa [%g1 + %g5] ASI, %l3; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %l4; \ ldxa [%g1 + %g2] ASI, %l5; \ ldxa [%g1 + %g3] ASI, %l6; \ ldxa [%g1 + %g5] ASI, %l7; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %i0; \ ldxa [%g1 + %g2] ASI, %i1; \ ldxa [%g1 + %g3] ASI, %i2; \ ldxa [%g1 + %g5] ASI, %i3; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %i4; \ ldxa [%g1 + %g2] ASI, %i5; \ ldxa [%g1 + %g3] ASI, %i6; \ ldxa [%g1 + %g5] ASI, %i7; \ restored; \ retry; nop; nop; nop; nop; \ b,a,pt %xcc, fill_fixup_dax; \ b,a,pt %xcc, fill_fixup_mna; \ b,a,pt %xcc, fill_fixup; And the way this works is that if any of those memory accesses generate an exception, the exception handler can revector to one of those final three branch instructions depending upon which kind of exception the memory access took. In this way, the fault handler doesn't have to know if it was a spill or a fill that it's handling the fault for. It just always branches to the last instruction in the parent trap's handler. For example, for a regular fault, the code goes: winfix_trampoline: rdpr %tpc, %g3 or %g3, 0x7c, %g3 wrpr %g3, %tnpc done All window trap handlers are 0x80 aligned, so if we "or" 0x7c into the trap time program counter, we'll get that final instruction in the trap handler. On return from trap, we have to pull the register window in but we do this by hand instead of just executing a "restore" instruction for several reasons. The largest being that from Niagara and onward we simply don't have enough levels in the trap stack to fully resolve all possible exception cases of a window fault when we are already at trap level 1 (which we enter to get ready to return from the original trap). This is executed inline via the FILL_*_RTRAP handlers. rtrap_64.S's code branches directly to these to do the window fill by hand if necessary. Now if you look at them, we'll see at the end: ba,a,pt %xcc, user_rtt_fill_fixup; ba,a,pt %xcc, user_rtt_fill_fixup; ba,a,pt %xcc, user_rtt_fill_fixup; And oops, all three cases are handled like a fault. This doesn't work because each of these trap types (data access exception, memory address unaligned, and faults) store their auxiliary info in different registers to pass on to the C handler which does the real work. So in the case where the stack was unaligned, the unaligned trap handler sets up the arg registers one way, and then we branched to the fault handler which expects them setup another way. So the FAULT_TYPE_* value ends up basically being garbage, and randomly would generate the backtrace seen above. Reported-by: Nick Alcock Signed-off-by: David S. Miller --- arch/sparc/include/asm/head_64.h | 4 ++ arch/sparc/include/asm/ttable.h | 8 ++-- arch/sparc/kernel/Makefile | 1 + arch/sparc/kernel/rtrap_64.S | 57 ++++------------------- arch/sparc/kernel/urtt_fill.S | 98 ++++++++++++++++++++++++++++++++++++++++ 5 files changed, 116 insertions(+), 52 deletions(-) create mode 100644 arch/sparc/kernel/urtt_fill.S diff --git a/arch/sparc/include/asm/head_64.h b/arch/sparc/include/asm/head_64.h index 10e9dabc4c41..f0700cfeedd7 100644 --- a/arch/sparc/include/asm/head_64.h +++ b/arch/sparc/include/asm/head_64.h @@ -15,6 +15,10 @@ #define PTREGS_OFF (STACK_BIAS + STACKFRAME_SZ) +#define RTRAP_PSTATE (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_IE) +#define RTRAP_PSTATE_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV) +#define RTRAP_PSTATE_AG_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_AG) + #define __CHEETAH_ID 0x003e0014 #define __JALAPENO_ID 0x003e0016 #define __SERRANO_ID 0x003e0022 diff --git a/arch/sparc/include/asm/ttable.h b/arch/sparc/include/asm/ttable.h index 71b5a67522ab..781b9f1dbdc2 100644 --- a/arch/sparc/include/asm/ttable.h +++ b/arch/sparc/include/asm/ttable.h @@ -589,8 +589,8 @@ user_rtt_fill_64bit: \ restored; \ nop; nop; nop; nop; nop; nop; \ nop; nop; nop; nop; nop; \ - ba,a,pt %xcc, user_rtt_fill_fixup; \ - ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup_dax; \ + ba,a,pt %xcc, user_rtt_fill_fixup_mna; \ ba,a,pt %xcc, user_rtt_fill_fixup; @@ -652,8 +652,8 @@ user_rtt_fill_32bit: \ restored; \ nop; nop; nop; nop; nop; \ nop; nop; nop; \ - ba,a,pt %xcc, user_rtt_fill_fixup; \ - ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup_dax; \ + ba,a,pt %xcc, user_rtt_fill_fixup_mna; \ ba,a,pt %xcc, user_rtt_fill_fixup; diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index 7cf9c6ea3f1f..fdb13327fded 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -21,6 +21,7 @@ CFLAGS_REMOVE_perf_event.o := -pg CFLAGS_REMOVE_pcr.o := -pg endif +obj-$(CONFIG_SPARC64) += urtt_fill.o obj-$(CONFIG_SPARC32) += entry.o wof.o wuf.o obj-$(CONFIG_SPARC32) += etrap_32.o obj-$(CONFIG_SPARC32) += rtrap_32.o diff --git a/arch/sparc/kernel/rtrap_64.S b/arch/sparc/kernel/rtrap_64.S index d08bdaffdbfc..216948ca4382 100644 --- a/arch/sparc/kernel/rtrap_64.S +++ b/arch/sparc/kernel/rtrap_64.S @@ -14,10 +14,6 @@ #include #include -#define RTRAP_PSTATE (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_IE) -#define RTRAP_PSTATE_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV) -#define RTRAP_PSTATE_AG_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_AG) - #ifdef CONFIG_CONTEXT_TRACKING # define SCHEDULE_USER schedule_user #else @@ -242,52 +238,17 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 wrpr %g1, %cwp ba,a,pt %xcc, user_rtt_fill_64bit -user_rtt_fill_fixup: - rdpr %cwp, %g1 - add %g1, 1, %g1 - wrpr %g1, 0x0, %cwp - - rdpr %wstate, %g2 - sll %g2, 3, %g2 - wrpr %g2, 0x0, %wstate - - /* We know %canrestore and %otherwin are both zero. */ - - sethi %hi(sparc64_kern_pri_context), %g2 - ldx [%g2 + %lo(sparc64_kern_pri_context)], %g2 - mov PRIMARY_CONTEXT, %g1 - -661: stxa %g2, [%g1] ASI_DMMU - .section .sun4v_1insn_patch, "ax" - .word 661b - stxa %g2, [%g1] ASI_MMU - .previous - - sethi %hi(KERNBASE), %g1 - flush %g1 +user_rtt_fill_fixup_dax: + ba,pt %xcc, user_rtt_fill_fixup_common + mov 1, %g3 - or %g4, FAULT_CODE_WINFIXUP, %g4 - stb %g4, [%g6 + TI_FAULT_CODE] - stx %g5, [%g6 + TI_FAULT_ADDR] +user_rtt_fill_fixup_mna: + ba,pt %xcc, user_rtt_fill_fixup_common + mov 2, %g3 - mov %g6, %l1 - wrpr %g0, 0x0, %tl - -661: nop - .section .sun4v_1insn_patch, "ax" - .word 661b - SET_GL(0) - .previous - - wrpr %g0, RTRAP_PSTATE, %pstate - - mov %l1, %g6 - ldx [%g6 + TI_TASK], %g4 - LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) - call do_sparc64_fault - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - nop +user_rtt_fill_fixup: + ba,pt %xcc, user_rtt_fill_fixup_common + clr %g3 user_rtt_pre_restore: add %g1, 1, %g1 diff --git a/arch/sparc/kernel/urtt_fill.S b/arch/sparc/kernel/urtt_fill.S new file mode 100644 index 000000000000..5604a2b051d4 --- /dev/null +++ b/arch/sparc/kernel/urtt_fill.S @@ -0,0 +1,98 @@ +#include +#include +#include +#include +#include + + .text + .align 8 + .globl user_rtt_fill_fixup_common +user_rtt_fill_fixup_common: + rdpr %cwp, %g1 + add %g1, 1, %g1 + wrpr %g1, 0x0, %cwp + + rdpr %wstate, %g2 + sll %g2, 3, %g2 + wrpr %g2, 0x0, %wstate + + /* We know %canrestore and %otherwin are both zero. */ + + sethi %hi(sparc64_kern_pri_context), %g2 + ldx [%g2 + %lo(sparc64_kern_pri_context)], %g2 + mov PRIMARY_CONTEXT, %g1 + +661: stxa %g2, [%g1] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g2, [%g1] ASI_MMU + .previous + + sethi %hi(KERNBASE), %g1 + flush %g1 + + mov %g4, %l4 + mov %g5, %l5 + brnz,pn %g3, 1f + mov %g3, %l3 + + or %g4, FAULT_CODE_WINFIXUP, %g4 + stb %g4, [%g6 + TI_FAULT_CODE] + stx %g5, [%g6 + TI_FAULT_ADDR] +1: + mov %g6, %l1 + wrpr %g0, 0x0, %tl + +661: nop + .section .sun4v_1insn_patch, "ax" + .word 661b + SET_GL(0) + .previous + + wrpr %g0, RTRAP_PSTATE, %pstate + + mov %l1, %g6 + ldx [%g6 + TI_TASK], %g4 + LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) + + brnz,pn %l3, 1f + nop + + call do_sparc64_fault + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + nop + +1: cmp %g3, 2 + bne,pn %xcc, 2f + nop + + sethi %hi(tlb_type), %g1 + lduw [%g1 + %lo(tlb_type)], %g1 + cmp %g1, 3 + bne,pt %icc, 1f + add %sp, PTREGS_OFF, %o0 + mov %l4, %o2 + call sun4v_do_mna + mov %l5, %o1 + ba,a,pt %xcc, rtrap +1: mov %l4, %o1 + mov %l5, %o2 + call mem_address_unaligned + nop + ba,a,pt %xcc, rtrap + +2: sethi %hi(tlb_type), %g1 + mov %l4, %o1 + lduw [%g1 + %lo(tlb_type)], %g1 + mov %l5, %o2 + cmp %g1, 3 + bne,pt %icc, 1f + add %sp, PTREGS_OFF, %o0 + call sun4v_data_access_exception + nop + ba,a,pt %xcc, rtrap + +1: call spitfire_data_access_exception + nop + ba,a,pt %xcc, rtrap -- cgit v1.2.3 From 871e178e0f2c4fa788f694721a10b4758d494ce1 Mon Sep 17 00:00:00 2001 From: Russell Currey Date: Thu, 7 Apr 2016 16:28:26 +1000 Subject: powerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge In the "ibm,configure-pe" and "ibm,configure-bridge" RTAS calls, the spec states that values of 9900-9905 can be returned, indicating that software should delay for 10^x (where x is the last digit, i.e. 990x) milliseconds and attempt the call again. Currently, the kernel doesn't know about this, and respecting it fixes some PCI failures when the hypervisor is busy. The delay is capped at 0.2 seconds. Cc: # 3.10+ Signed-off-by: Russell Currey Acked-by: Gavin Shan Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/pseries/eeh_pseries.c | 51 ++++++++++++++++++++-------- 1 file changed, 36 insertions(+), 15 deletions(-) diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index ac3ffd97e059..405baaf96864 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -615,29 +615,50 @@ static int pseries_eeh_configure_bridge(struct eeh_pe *pe) { int config_addr; int ret; + /* Waiting 0.2s maximum before skipping configuration */ + int max_wait = 200; /* Figure out the PE address */ config_addr = pe->config_addr; if (pe->addr) config_addr = pe->addr; - /* Use new configure-pe function, if supported */ - if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) { - ret = rtas_call(ibm_configure_pe, 3, 1, NULL, - config_addr, BUID_HI(pe->phb->buid), - BUID_LO(pe->phb->buid)); - } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) { - ret = rtas_call(ibm_configure_bridge, 3, 1, NULL, - config_addr, BUID_HI(pe->phb->buid), - BUID_LO(pe->phb->buid)); - } else { - return -EFAULT; - } + while (max_wait > 0) { + /* Use new configure-pe function, if supported */ + if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) { + ret = rtas_call(ibm_configure_pe, 3, 1, NULL, + config_addr, BUID_HI(pe->phb->buid), + BUID_LO(pe->phb->buid)); + } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) { + ret = rtas_call(ibm_configure_bridge, 3, 1, NULL, + config_addr, BUID_HI(pe->phb->buid), + BUID_LO(pe->phb->buid)); + } else { + return -EFAULT; + } - if (ret) - pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n", - __func__, pe->phb->global_number, pe->addr, ret); + if (!ret) + return ret; + + /* + * If RTAS returns a delay value that's above 100ms, cut it + * down to 100ms in case firmware made a mistake. For more + * on how these delay values work see rtas_busy_delay_time + */ + if (ret > RTAS_EXTENDED_DELAY_MIN+2 && + ret <= RTAS_EXTENDED_DELAY_MAX) + ret = RTAS_EXTENDED_DELAY_MIN+2; + + max_wait -= rtas_busy_delay_time(ret); + + if (max_wait < 0) + break; + + rtas_busy_delay(ret); + } + pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n", + __func__, pe->phb->global_number, pe->addr, ret); return ret; } -- cgit v1.2.3 From bd000b82e86503d5e8b9e6d40a3257bc9dddb96d Mon Sep 17 00:00:00 2001 From: Russell Currey Date: Thu, 7 Apr 2016 16:28:27 +1000 Subject: powerpc/pseries/eeh: Refactor the configure_bridge RTAS tokens The RTAS calls "ibm,configure-pe" and "ibm,configure-bridge" perform the same actions, however the former can skip configuration if unnecessary. The existing code treats them as different tokens even though only one will ever be called. Refactor this by making a single token that is assigned during init. Signed-off-by: Russell Currey Acked-by: Gavin Shan Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/pseries/eeh_pseries.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index 405baaf96864..3998e0f9a03b 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -53,7 +53,6 @@ static int ibm_read_slot_reset_state2; static int ibm_slot_error_detail; static int ibm_get_config_addr_info; static int ibm_get_config_addr_info2; -static int ibm_configure_bridge; static int ibm_configure_pe; /* @@ -81,7 +80,14 @@ static int pseries_eeh_init(void) ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2"); ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info"); ibm_configure_pe = rtas_token("ibm,configure-pe"); - ibm_configure_bridge = rtas_token("ibm,configure-bridge"); + + /* + * ibm,configure-pe and ibm,configure-bridge have the same semantics, + * however ibm,configure-pe can be faster. If we can't find + * ibm,configure-pe then fall back to using ibm,configure-bridge. + */ + if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE) + ibm_configure_pe = rtas_token("ibm,configure-bridge"); /* * Necessary sanity check. We needn't check "get-config-addr-info" @@ -93,8 +99,7 @@ static int pseries_eeh_init(void) (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE && ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) || ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE || - (ibm_configure_pe == RTAS_UNKNOWN_SERVICE && - ibm_configure_bridge == RTAS_UNKNOWN_SERVICE)) { + ibm_configure_pe == RTAS_UNKNOWN_SERVICE) { pr_info("EEH functionality not supported\n"); return -EINVAL; } @@ -624,18 +629,9 @@ static int pseries_eeh_configure_bridge(struct eeh_pe *pe) config_addr = pe->addr; while (max_wait > 0) { - /* Use new configure-pe function, if supported */ - if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) { - ret = rtas_call(ibm_configure_pe, 3, 1, NULL, - config_addr, BUID_HI(pe->phb->buid), - BUID_LO(pe->phb->buid)); - } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) { - ret = rtas_call(ibm_configure_bridge, 3, 1, NULL, - config_addr, BUID_HI(pe->phb->buid), - BUID_LO(pe->phb->buid)); - } else { - return -EFAULT; - } + ret = rtas_call(ibm_configure_pe, 3, 1, NULL, + config_addr, BUID_HI(pe->phb->buid), + BUID_LO(pe->phb->buid)); if (!ret) return ret; -- cgit v1.2.3 From 2547476a5e4061f6addb88d5fc837d3a950f54c4 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 13:45:35 +0200 Subject: Fix typos Signed-off-by: Andrea Gelmini Signed-off-by: Vineet Gupta --- arch/arc/Makefile | 2 +- arch/arc/include/asm/entry-compact.h | 4 ++-- arch/arc/include/asm/mmu_context.h | 2 +- arch/arc/include/asm/pgtable.h | 2 +- arch/arc/include/asm/processor.h | 2 +- arch/arc/include/asm/smp.h | 2 +- arch/arc/include/asm/thread_info.h | 2 +- arch/arc/include/asm/uaccess.h | 2 +- arch/arc/include/uapi/asm/swab.h | 2 +- arch/arc/kernel/perf_event.c | 2 +- arch/arc/kernel/setup.c | 2 +- arch/arc/kernel/signal.c | 2 +- arch/arc/kernel/troubleshoot.c | 2 +- arch/arc/mm/cache.c | 6 +++--- arch/arc/mm/dma.c | 2 +- 15 files changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 02fabef2891c..d4df6be66d58 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -127,7 +127,7 @@ libs-y += arch/arc/lib/ $(LIBGCC) boot := arch/arc/boot -#default target for make without any arguements. +#default target for make without any arguments. KBUILD_IMAGE := bootpImage all: $(KBUILD_IMAGE) diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h index e0e1faf03c50..14c310f2e0b1 100644 --- a/arch/arc/include/asm/entry-compact.h +++ b/arch/arc/include/asm/entry-compact.h @@ -76,8 +76,8 @@ * We need to be a bit more cautious here. What if a kernel bug in * L1 ISR, caused SP to go whaco (some small value which looks like * USER stk) and then we take L2 ISR. - * Above brlo alone would treat it as a valid L1-L2 sceanrio - * instead of shouting alound + * Above brlo alone would treat it as a valid L1-L2 scenario + * instead of shouting around * The only feasible way is to make sure this L2 happened in * L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in * L1 ISR before it switches stack diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h index 1fd467ef658f..b0b87f2447f5 100644 --- a/arch/arc/include/asm/mmu_context.h +++ b/arch/arc/include/asm/mmu_context.h @@ -83,7 +83,7 @@ static inline void get_new_mmu_context(struct mm_struct *mm) local_flush_tlb_all(); /* - * Above checke for rollover of 8 bit ASID in 32 bit container. + * Above check for rollover of 8 bit ASID in 32 bit container. * If the container itself wrapped around, set it to a non zero * "generation" to distinguish from no context */ diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 034bbdc0ff61..858f98ef7f1b 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -47,7 +47,7 @@ * Page Tables are purely for Linux VM's consumption and the bits below are * suited to that (uniqueness). Hence some are not implemented in the TLB and * some have different value in TLB. - * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible becoz they live in + * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible because they live in * seperate PD0 and PD1, which combined forms a translation entry) * while for PTE perspective, they are 8 and 9 respectively * with MMU v3: Most bits (except SHARED) represent the exact hardware pos diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h index f9048994b22f..16b630fbeb6a 100644 --- a/arch/arc/include/asm/processor.h +++ b/arch/arc/include/asm/processor.h @@ -78,7 +78,7 @@ struct task_struct; #define KSTK_ESP(tsk) (task_pt_regs(tsk)->sp) /* - * Where abouts of Task's sp, fp, blink when it was last seen in kernel mode. + * Where about of Task's sp, fp, blink when it was last seen in kernel mode. * Look in process.c for details of kernel stack layout */ #define TSK_K_ESP(tsk) (tsk->thread.ksp) diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h index 991380438d6b..89fdd1b0a76e 100644 --- a/arch/arc/include/asm/smp.h +++ b/arch/arc/include/asm/smp.h @@ -86,7 +86,7 @@ static inline const char *arc_platform_smp_cpuinfo(void) * (1) These insn were introduced only in 4.10 release. So for older released * support needed. * - * (2) In a SMP setup, the LLOCK/SCOND atomiticity across CPUs needs to be + * (2) In a SMP setup, the LLOCK/SCOND atomicity across CPUs needs to be * gaurantted by the platform (not something which core handles). * Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ * disabling for atomicity. diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h index 3af67455659a..2d79e527fa50 100644 --- a/arch/arc/include/asm/thread_info.h +++ b/arch/arc/include/asm/thread_info.h @@ -103,7 +103,7 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void) /* * _TIF_ALLWORK_MASK includes SYSCALL_TRACE, but we don't need it. - * SYSCALL_TRACE is anways seperately/unconditionally tested right after a + * SYSCALL_TRACE is anyway seperately/unconditionally tested right after a * syscall, so all that reamins to be tested is _TIF_WORK_MASK */ diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h index d1da6032b715..a78d5670884f 100644 --- a/arch/arc/include/asm/uaccess.h +++ b/arch/arc/include/asm/uaccess.h @@ -32,7 +32,7 @@ #define __kernel_ok (segment_eq(get_fs(), KERNEL_DS)) /* - * Algorthmically, for __user_ok() we want do: + * Algorithmically, for __user_ok() we want do: * (start < TASK_SIZE) && (start+len < TASK_SIZE) * where TASK_SIZE could either be retrieved from thread_info->addr_limit or * emitted directly in code. diff --git a/arch/arc/include/uapi/asm/swab.h b/arch/arc/include/uapi/asm/swab.h index 095599a73195..71f3918b0fc3 100644 --- a/arch/arc/include/uapi/asm/swab.h +++ b/arch/arc/include/uapi/asm/swab.h @@ -74,7 +74,7 @@ __tmp ^ __in; \ }) -#elif (ARC_BSWAP_TYPE == 2) /* Custom single cycle bwap instruction */ +#elif (ARC_BSWAP_TYPE == 2) /* Custom single cycle bswap instruction */ #define __arch_swab32(x) \ ({ \ diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c index 6fd48021324b..08f03d9b5b3e 100644 --- a/arch/arc/kernel/perf_event.c +++ b/arch/arc/kernel/perf_event.c @@ -108,7 +108,7 @@ static void arc_perf_event_update(struct perf_event *event, int64_t delta = new_raw_count - prev_raw_count; /* - * We don't afaraid of hwc->prev_count changing beneath our feet + * We aren't afraid of hwc->prev_count changing beneath our feet * because there's no way for us to re-enter this function anytime. */ local64_set(&hwc->prev_count, new_raw_count); diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index f63b8bfefb0c..2ee7a4d758a8 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -392,7 +392,7 @@ void __init setup_arch(char **cmdline_p) /* * If we are here, it is established that @uboot_arg didn't * point to DT blob. Instead if u-boot says it is cmdline, - * Appent to embedded DT cmdline. + * append to embedded DT cmdline. * setup_machine_fdt() would have populated @boot_command_line */ if (uboot_tag == 1) { diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c index 004b7f0bc76c..6cb3736b6b83 100644 --- a/arch/arc/kernel/signal.c +++ b/arch/arc/kernel/signal.c @@ -34,7 +34,7 @@ * -ViXS were still seeing crashes when using insmod to load drivers. * It turned out that the code to change Execute permssions for TLB entries * of user was not guarded for interrupts (mod_tlb_permission) - * This was cauing TLB entries to be overwritten on unrelated indexes + * This was causing TLB entries to be overwritten on unrelated indexes * * Vineetg: July 15th 2008: Bug #94183 * -Exception happens in Delay slot of a JMP, and before user space resumes, diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c index a6f91e88ce36..934150e7ac48 100644 --- a/arch/arc/kernel/troubleshoot.c +++ b/arch/arc/kernel/troubleshoot.c @@ -276,7 +276,7 @@ static int tlb_stats_open(struct inode *inode, struct file *file) return 0; } -/* called on user read(): display the couters */ +/* called on user read(): display the counters */ static ssize_t tlb_stats_output(struct file *file, /* file descriptor */ char __user *user_buf, /* user buffer */ size_t len, /* length of buffer */ diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 9e5eddbb856f..5a294b2c3cb3 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -215,7 +215,7 @@ slc_chk: * ------------------ * This ver of MMU supports variable page sizes (1k-16k): although Linux will * only support 8k (default), 16k and 4k. - * However from hardware perspective, smaller page sizes aggrevate aliasing + * However from hardware perspective, smaller page sizes aggravate aliasing * meaning more vaddr bits needed to disambiguate the cache-line-op ; * the existing scheme of piggybacking won't work for certain configurations. * Two new registers IC_PTAG and DC_PTAG inttoduced. @@ -302,7 +302,7 @@ void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr, /* * This is technically for MMU v4, using the MMU v3 programming model - * Special work for HS38 aliasing I-cache configuratino with PAE40 + * Special work for HS38 aliasing I-cache configuration with PAE40 * - upper 8 bits of paddr need to be written into PTAG_HI * - (and needs to be written before the lower 32 bits) * Note that PTAG_HI is hoisted outside the line loop @@ -936,7 +936,7 @@ void arc_cache_init(void) ic->ver, CONFIG_ARC_MMU_VER); /* - * In MMU v4 (HS38x) the alising icache config uses IVIL/PTAG + * In MMU v4 (HS38x) the aliasing icache config uses IVIL/PTAG * pair to provide vaddr/paddr respectively, just as in MMU v3 */ if (is_isa_arcv2() && ic->alias) diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c index 8c8e36fa5659..73d7e4c75b7d 100644 --- a/arch/arc/mm/dma.c +++ b/arch/arc/mm/dma.c @@ -10,7 +10,7 @@ * DMA Coherent API Notes * * I/O is inherently non-coherent on ARC. So a coherent DMA buffer is - * implemented by accessintg it using a kernel virtual address, with + * implemented by accessing it using a kernel virtual address, with * Cache bit off in the TLB entry. * * The default DMA address == Phy address which is 0x8000_0000 based. -- cgit v1.2.3 From 49acadff2a0cb4f7ff4efe0fb6c23f5fad81a3b3 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Wed, 25 May 2016 15:11:29 +0300 Subject: arc: Get rid of root core-frequency property Now when we switched to usage of real clk devices for CPU core frequency those root properties make no sense any longer. Se we're just getting rid of them here to not confuse readers of our .dts files. Signed-off-by: Alexey Brodkin Cc: Christian Ruppert Cc: Noam Camus Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/abilis_tb100.dtsi | 2 -- arch/arc/boot/dts/abilis_tb101.dtsi | 2 -- arch/arc/boot/dts/axc001.dtsi | 1 - arch/arc/boot/dts/axc003.dtsi | 1 - arch/arc/boot/dts/axc003_idu.dtsi | 1 - arch/arc/boot/dts/eznps.dts | 1 - arch/arc/boot/dts/nsim_700.dts | 1 - arch/arc/boot/dts/nsimosci.dts | 1 - arch/arc/boot/dts/nsimosci_hs.dts | 1 - arch/arc/boot/dts/nsimosci_hs_idu.dts | 1 - arch/arc/boot/dts/skeleton.dtsi | 1 - arch/arc/boot/dts/skeleton_hs.dtsi | 1 - arch/arc/boot/dts/skeleton_hs_idu.dtsi | 1 - arch/arc/boot/dts/vdk_axc003.dtsi | 1 - arch/arc/boot/dts/vdk_axc003_idu.dtsi | 1 - 15 files changed, 17 deletions(-) diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi index 3942634f805a..02410b211433 100644 --- a/arch/arc/boot/dts/abilis_tb100.dtsi +++ b/arch/arc/boot/dts/abilis_tb100.dtsi @@ -23,8 +23,6 @@ / { - clock-frequency = <500000000>; /* 500 MHZ */ - soc100 { bus-frequency = <166666666>; diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi index b0467229a5c4..f9e7686044eb 100644 --- a/arch/arc/boot/dts/abilis_tb101.dtsi +++ b/arch/arc/boot/dts/abilis_tb101.dtsi @@ -23,8 +23,6 @@ / { - clock-frequency = <500000000>; /* 500 MHZ */ - soc100 { bus-frequency = <166666666>; diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi index 3e02f152edcb..6ae2c476ad82 100644 --- a/arch/arc/boot/dts/axc001.dtsi +++ b/arch/arc/boot/dts/axc001.dtsi @@ -15,7 +15,6 @@ / { compatible = "snps,arc"; - clock-frequency = <750000000>; /* 750 MHZ */ #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi index 378e455a94c4..14df46f141bf 100644 --- a/arch/arc/boot/dts/axc003.dtsi +++ b/arch/arc/boot/dts/axc003.dtsi @@ -14,7 +14,6 @@ / { compatible = "snps,arc"; - clock-frequency = <90000000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi index 64c94b2860ab..3d6cfa32bf51 100644 --- a/arch/arc/boot/dts/axc003_idu.dtsi +++ b/arch/arc/boot/dts/axc003_idu.dtsi @@ -14,7 +14,6 @@ / { compatible = "snps,arc"; - clock-frequency = <90000000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arc/boot/dts/eznps.dts b/arch/arc/boot/dts/eznps.dts index b89f6c3eb352..1e0d225791c1 100644 --- a/arch/arc/boot/dts/eznps.dts +++ b/arch/arc/boot/dts/eznps.dts @@ -18,7 +18,6 @@ / { compatible = "ezchip,arc-nps"; - clock-frequency = <83333333>; /* 83.333333 MHZ */ #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&intc>; diff --git a/arch/arc/boot/dts/nsim_700.dts b/arch/arc/boot/dts/nsim_700.dts index 5d5e373e0ebc..63970513e4ae 100644 --- a/arch/arc/boot/dts/nsim_700.dts +++ b/arch/arc/boot/dts/nsim_700.dts @@ -11,7 +11,6 @@ / { compatible = "snps,nsim"; - clock-frequency = <80000000>; /* 80 MHZ */ #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&core_intc>; diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts index b5b060adce8a..763d66c883da 100644 --- a/arch/arc/boot/dts/nsimosci.dts +++ b/arch/arc/boot/dts/nsimosci.dts @@ -11,7 +11,6 @@ / { compatible = "snps,nsimosci"; - clock-frequency = <20000000>; /* 20 MHZ */ #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&core_intc>; diff --git a/arch/arc/boot/dts/nsimosci_hs.dts b/arch/arc/boot/dts/nsimosci_hs.dts index 325e73090a18..4eb97c584b18 100644 --- a/arch/arc/boot/dts/nsimosci_hs.dts +++ b/arch/arc/boot/dts/nsimosci_hs.dts @@ -11,7 +11,6 @@ / { compatible = "snps,nsimosci_hs"; - clock-frequency = <20000000>; /* 20 MHZ */ #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&core_intc>; diff --git a/arch/arc/boot/dts/nsimosci_hs_idu.dts b/arch/arc/boot/dts/nsimosci_hs_idu.dts index ee03d7126581..853f897eb2a3 100644 --- a/arch/arc/boot/dts/nsimosci_hs_idu.dts +++ b/arch/arc/boot/dts/nsimosci_hs_idu.dts @@ -11,7 +11,6 @@ / { compatible = "snps,nsimosci_hs"; - clock-frequency = <5000000>; /* 5 MHZ */ #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&core_intc>; diff --git a/arch/arc/boot/dts/skeleton.dtsi b/arch/arc/boot/dts/skeleton.dtsi index 3a10cc633e2b..65808fe0a290 100644 --- a/arch/arc/boot/dts/skeleton.dtsi +++ b/arch/arc/boot/dts/skeleton.dtsi @@ -13,7 +13,6 @@ / { compatible = "snps,arc"; - clock-frequency = <80000000>; /* 80 MHZ */ #address-cells = <1>; #size-cells = <1>; chosen { }; diff --git a/arch/arc/boot/dts/skeleton_hs.dtsi b/arch/arc/boot/dts/skeleton_hs.dtsi index 71fd308a9298..2dfe8037dfbb 100644 --- a/arch/arc/boot/dts/skeleton_hs.dtsi +++ b/arch/arc/boot/dts/skeleton_hs.dtsi @@ -8,7 +8,6 @@ / { compatible = "snps,arc"; - clock-frequency = <80000000>; /* 80 MHZ */ #address-cells = <1>; #size-cells = <1>; chosen { }; diff --git a/arch/arc/boot/dts/skeleton_hs_idu.dtsi b/arch/arc/boot/dts/skeleton_hs_idu.dtsi index d1cb25a66989..4c11079f3565 100644 --- a/arch/arc/boot/dts/skeleton_hs_idu.dtsi +++ b/arch/arc/boot/dts/skeleton_hs_idu.dtsi @@ -8,7 +8,6 @@ / { compatible = "snps,arc"; - clock-frequency = <80000000>; /* 80 MHZ */ #address-cells = <1>; #size-cells = <1>; chosen { }; diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi index ad4ee43bd2ac..0fd6ba985b16 100644 --- a/arch/arc/boot/dts/vdk_axc003.dtsi +++ b/arch/arc/boot/dts/vdk_axc003.dtsi @@ -14,7 +14,6 @@ / { compatible = "snps,arc"; - clock-frequency = <50000000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi index a3cb6263c581..82214cd7ba0c 100644 --- a/arch/arc/boot/dts/vdk_axc003_idu.dtsi +++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi @@ -15,7 +15,6 @@ / { compatible = "snps,arc"; - clock-frequency = <50000000>; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From c56d329e28cff2d7a1e77cafc2f9c7e986ba11cb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 22 May 2016 11:05:52 +0200 Subject: MAINTAINERS: Add file patterns for dma device tree bindings Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven Cc: Vinod Koul Cc: dmaengine@vger.kernel.org Signed-off-by: Vinod Koul --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 7304d2e37a98..f7bbae36d078 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3773,6 +3773,7 @@ Q: https://patchwork.kernel.org/project/linux-dmaengine/list/ S: Maintained F: drivers/dma/ F: include/linux/dmaengine.h +F: Documentation/devicetree/bindings/dma/ F: Documentation/dmaengine/ T: git git://git.infradead.org/users/vkoul/slave-dma.git -- cgit v1.2.3 From 4a9723e8df68cfce4048517ee32e37f78854b6fb Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Thu, 12 May 2016 16:54:08 +0200 Subject: dmaengine: at_xdmac: align descriptors on 64 bits Having descriptors aligned on 64 bits allows update CNDA and CUBC in an atomic way. Signed-off-by: Ludovic Desroches Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Cc: stable@vger.kernel.org #v4.1 and later Reviewed-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_xdmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index 8e304b1befc5..ba9b0b73fa47 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -242,7 +242,7 @@ struct at_xdmac_lld { u32 mbr_dus; /* Destination Microblock Stride Register */ }; - +/* 64-bit alignment needed to update CNDA and CUBC registers in an atomic way. */ struct at_xdmac_desc { struct at_xdmac_lld lld; enum dma_transfer_direction direction; @@ -253,7 +253,7 @@ struct at_xdmac_desc { unsigned int xfer_size; struct list_head descs_list; struct list_head xfer_node; -}; +} __aligned(sizeof(u64)); static inline void __iomem *at_xdmac_chan_reg_base(struct at_xdmac *atxdmac, unsigned int chan_nb) { -- cgit v1.2.3 From 53398f488821c2b5b15291e3debec6ad33f75d3d Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Thu, 12 May 2016 16:54:09 +0200 Subject: dmaengine: at_xdmac: fix residue corruption An unexpected value of CUBC can lead to a corrupted residue. A more complex sequence is needed to detect an inaccurate value for NCA or CUBC. Signed-off-by: Ludovic Desroches Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Cc: stable@vger.kernel.org #v4.1 and later Reviewed-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_xdmac.c | 54 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 32 insertions(+), 22 deletions(-) diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index ba9b0b73fa47..b02494e115fe 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -1400,6 +1400,7 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, u32 cur_nda, check_nda, cur_ubc, mask, value; u8 dwidth = 0; unsigned long flags; + bool initd; ret = dma_cookie_status(chan, cookie, txstate); if (ret == DMA_COMPLETE) @@ -1435,34 +1436,43 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, } /* - * When processing the residue, we need to read two registers but we - * can't do it in an atomic way. AT_XDMAC_CNDA is used to find where - * we stand in the descriptor list and AT_XDMAC_CUBC is used - * to know how many data are remaining for the current descriptor. - * Since the dma channel is not paused to not loose data, between the - * AT_XDMAC_CNDA and AT_XDMAC_CUBC read, we may have change of - * descriptor. - * For that reason, after reading AT_XDMAC_CUBC, we check if we are - * still using the same descriptor by reading a second time - * AT_XDMAC_CNDA. If AT_XDMAC_CNDA has changed, it means we have to - * read again AT_XDMAC_CUBC. + * The easiest way to compute the residue should be to pause the DMA + * but doing this can lead to miss some data as some devices don't + * have FIFO. + * We need to read several registers because: + * - DMA is running therefore a descriptor change is possible while + * reading these registers + * - When the block transfer is done, the value of the CUBC register + * is set to its initial value until the fetch of the next descriptor. + * This value will corrupt the residue calculation so we have to skip + * it. + * + * INITD -------- ------------ + * |____________________| + * _______________________ _______________ + * NDA @desc2 \/ @desc3 + * _______________________/\_______________ + * __________ ___________ _______________ + * CUBC 0 \/ MAX desc1 \/ MAX desc2 + * __________/\___________/\_______________ + * + * Since descriptors are aligned on 64 bits, we can assume that + * the update of NDA and CUBC is atomic. * Memory barriers are used to ensure the read order of the registers. - * A max number of retries is set because unlikely it can never ends if - * we are transferring a lot of data with small buffers. + * A max number of retries is set because unlikely it could never ends. */ - cur_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc; - rmb(); - cur_ubc = at_xdmac_chan_read(atchan, AT_XDMAC_CUBC); for (retry = 0; retry < AT_XDMAC_RESIDUE_MAX_RETRIES; retry++) { - rmb(); check_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc; - - if (likely(cur_nda == check_nda)) - break; - - cur_nda = check_nda; + rmb(); + initd = !!(at_xdmac_chan_read(atchan, AT_XDMAC_CC) & AT_XDMAC_CC_INITD); rmb(); cur_ubc = at_xdmac_chan_read(atchan, AT_XDMAC_CUBC); + rmb(); + cur_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc; + rmb(); + + if ((check_nda == cur_nda) && initd) + break; } if (unlikely(retry >= AT_XDMAC_RESIDUE_MAX_RETRIES)) { -- cgit v1.2.3 From 9295c41d77ca93aac79cfca6fa09fa1ca5cab66f Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Thu, 12 May 2016 16:54:10 +0200 Subject: dmaengine: at_xdmac: double FIFO flush needed to compute residue Due to the way CUBC register is updated, a double flush is needed to compute an accurate residue. First flush aim is to get data from the DMA FIFO and second one ensures that we won't report data which are not in memory. Signed-off-by: Ludovic Desroches Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Cc: stable@vger.kernel.org #v4.1 and later Reviewed-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_xdmac.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index b02494e115fe..75bd6621dc5d 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -1425,7 +1425,16 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, residue = desc->xfer_size; /* * Flush FIFO: only relevant when the transfer is source peripheral - * synchronized. + * synchronized. Flush is needed before reading CUBC because data in + * the FIFO are not reported by CUBC. Reporting a residue of the + * transfer length while we have data in FIFO can cause issue. + * Usecase: atmel USART has a timeout which means I have received + * characters but there is no more character received for a while. On + * timeout, it requests the residue. If the data are in the DMA FIFO, + * we will return a residue of the transfer length. It means no data + * received. If an application is waiting for these data, it will hang + * since we won't have another USART timeout without receiving new + * data. */ mask = AT_XDMAC_CC_TYPE | AT_XDMAC_CC_DSYNC; value = AT_XDMAC_CC_TYPE_PER_TRAN | AT_XDMAC_CC_DSYNC_PER2MEM; @@ -1480,6 +1489,19 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, goto spin_unlock; } + /* + * Flush FIFO: only relevant when the transfer is source peripheral + * synchronized. Another flush is needed here because CUBC is updated + * when the controller sends the data write command. It can lead to + * report data that are not written in the memory or the device. The + * FIFO flush ensures that data are really written. + */ + if ((desc->lld.mbr_cfg & mask) == value) { + at_xdmac_write(atxdmac, AT_XDMAC_GSWF, atchan->mask); + while (!(at_xdmac_chan_read(atchan, AT_XDMAC_CIS) & AT_XDMAC_CIS_FIS)) + cpu_relax(); + } + /* * Remove size of all microblocks already transferred and the current * one. Then add the remaining size to transfer of the current -- cgit v1.2.3 From 9791d8e7627d1c4dbf8819646833f2f576b4f8f3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 25 May 2016 16:50:45 +0200 Subject: ipv6: hide ip6_encap_hlen/ip6_tnl_encap definitions A recent cleanup moved MAX_IPTUN_ENCAP_OPS along with some other definitions, but it is now invisible when CONFIG_INET is not defined, but still referenced from ip6_tunnel.h: In file included from net/xfrm/xfrm_input.c:17:0: include/net/ip6_tunnel.h:67:17: error: 'MAX_IPTUN_ENCAP_OPS' undeclared here (not in a function) ip6tun_encaps[MAX_IPTUN_ENCAP_OPS]; ^~~~~~~~~~~~~~~~~~~ This hides the ip6_encap_hlen and ip6_tnl_encap functions inside of CONFIG_INET so we don't run into the the problem. Alternatively we could move the macro out of the #ifdef again to restore the previous behavior Signed-off-by: Arnd Bergmann Fixes: 55c2bc143224 ("net: Cleanup encap items in ip_tunnels.h") Signed-off-by: David S. Miller --- include/net/ip6_tunnel.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h index d325c81332e3..43a5a0e4524c 100644 --- a/include/net/ip6_tunnel.h +++ b/include/net/ip6_tunnel.h @@ -63,6 +63,8 @@ struct ip6_tnl_encap_ops { u8 *protocol, struct flowi6 *fl6); }; +#ifdef CONFIG_INET + extern const struct ip6_tnl_encap_ops __rcu * ip6tun_encaps[MAX_IPTUN_ENCAP_OPS]; @@ -138,7 +140,6 @@ struct net *ip6_tnl_get_link_net(const struct net_device *dev); int ip6_tnl_get_iflink(const struct net_device *dev); int ip6_tnl_change_mtu(struct net_device *dev, int new_mtu); -#ifdef CONFIG_INET static inline void ip6tunnel_xmit(struct sock *sk, struct sk_buff *skb, struct net_device *dev) { -- cgit v1.2.3 From fabb13db448efc23c47851550867fc46519de97e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 25 May 2016 16:50:46 +0200 Subject: fou: add Kconfig options for IPv6 support A previous patch added the fou6.ko module, but that failed to link in a couple of configurations: net/built-in.o: In function `ip6_tnl_encap_add_fou_ops': net/ipv6/fou6.c:88: undefined reference to `ip6_tnl_encap_add_ops' net/ipv6/fou6.c:94: undefined reference to `ip6_tnl_encap_add_ops' net/ipv6/fou6.c:97: undefined reference to `ip6_tnl_encap_del_ops' net/built-in.o: In function `ip6_tnl_encap_del_fou_ops': net/ipv6/fou6.c:106: undefined reference to `ip6_tnl_encap_del_ops' net/ipv6/fou6.c:107: undefined reference to `ip6_tnl_encap_del_ops' If CONFIG_IPV6=m, ip6_tnl_encap_add_ops/ip6_tnl_encap_del_ops are in a module, but fou6.c can still be built-in, and that obviously fails to link. Also, if CONFIG_IPV6=y, but CONFIG_IPV6_TUNNEL=m or CONFIG_IPV6_TUNNEL=n, the same problem happens for a different reason. This adds two new silent Kconfig symbols to work around both problems: - CONFIG_IPV6_FOU is now always set to 'm' if either CONFIG_NET_FOU=m or CONFIG_IPV6=m - CONFIG_IPV6_FOU_TUNNEL is set implicitly when IPV6_FOU is enabled and NET_FOU_IP_TUNNELS is also turned out, and it will ensure that CONFIG_IPV6_TUNNEL is also available. The options could be made user-visible as well, to give additional room for configuration, but it seems easier not to bother users with more choice here. Signed-off-by: Arnd Bergmann Fixes: aa3463d65e7b ("fou: Add encap ops for IPv6 tunnels") Signed-off-by: David S. Miller --- net/ipv6/Kconfig | 9 +++++++++ net/ipv6/Makefile | 2 +- net/ipv6/fou6.c | 2 +- 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig index 3f8411328de5..994608263260 100644 --- a/net/ipv6/Kconfig +++ b/net/ipv6/Kconfig @@ -232,6 +232,15 @@ config IPV6_GRE Saying M here will produce a module called ip6_gre. If unsure, say N. +config IPV6_FOU + tristate + default NET_FOU && IPV6 + +config IPV6_FOU_TUNNEL + tristate + default NET_FOU_IP_TUNNELS && IPV6_FOU + select INET6_TUNNEL + config IPV6_MULTIPLE_TABLES bool "IPv6: Multiple Routing Tables" select FIB_RULES diff --git a/net/ipv6/Makefile b/net/ipv6/Makefile index 7ec3129c9ace..d42ca3d1197f 100644 --- a/net/ipv6/Makefile +++ b/net/ipv6/Makefile @@ -42,7 +42,7 @@ obj-$(CONFIG_IPV6_VTI) += ip6_vti.o obj-$(CONFIG_IPV6_SIT) += sit.o obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel.o obj-$(CONFIG_IPV6_GRE) += ip6_gre.o -obj-$(CONFIG_NET_FOU) += fou6.o +obj-$(CONFIG_NET_FOU_IPV6_TUNNELS) += fou6.o obj-y += addrconf_core.o exthdrs_core.o ip6_checksum.o ip6_icmp.o obj-$(CONFIG_INET) += output_core.o protocol.o $(ipv6-offload) diff --git a/net/ipv6/fou6.c b/net/ipv6/fou6.c index c972d0b52579..9ea249b9451e 100644 --- a/net/ipv6/fou6.c +++ b/net/ipv6/fou6.c @@ -69,7 +69,7 @@ int gue6_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, } EXPORT_SYMBOL(gue6_build_header); -#ifdef CONFIG_NET_FOU_IP_TUNNELS +#if IS_ENABLED(CONFIG_IPV6_FOU_TUNNEL) static const struct ip6_tnl_encap_ops fou_ip6tun_ops = { .encap_hlen = fou_encap_hlen, -- cgit v1.2.3 From 6756325a9a1e2d36b6210f4a42f77501c917ebb9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 26 May 2016 09:46:22 +0300 Subject: ptp: oops in ptp_ioctl() If we pass ERR_PTR(-EFAULT) to kfree() then it's going to oops. Fixes: 2ece068e1b1d ('ptp: use memdup_user().') Signed-off-by: Dan Carpenter Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/ptp/ptp_chardev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c index 0b1ac6be69ce..d637c933c8a9 100644 --- a/drivers/ptp/ptp_chardev.c +++ b/drivers/ptp/ptp_chardev.c @@ -211,6 +211,7 @@ long ptp_ioctl(struct posix_clock *pc, unsigned int cmd, unsigned long arg) sysoff = memdup_user((void __user *)arg, sizeof(*sysoff)); if (IS_ERR(sysoff)) { err = PTR_ERR(sysoff); + sysoff = NULL; break; } if (sysoff->n_samples > PTP_MAX_SAMPLES) { -- cgit v1.2.3 From 0d08df6c493898e679d9c517e77ea95c063d40ec Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 26 May 2016 14:43:52 +0300 Subject: net/lapb: tuse %*ph to dump buffers Use %*ph specifier to dump small buffers in hex format instead doing this byte-by-byte. Signed-off-by: Andy Shevchenko Signed-off-by: David S. Miller --- net/lapb/lapb_in.c | 5 ++--- net/lapb/lapb_out.c | 4 +--- net/lapb/lapb_subr.c | 14 +++++--------- 3 files changed, 8 insertions(+), 15 deletions(-) diff --git a/net/lapb/lapb_in.c b/net/lapb/lapb_in.c index 5dba899131b3..182470847fcf 100644 --- a/net/lapb/lapb_in.c +++ b/net/lapb/lapb_in.c @@ -444,10 +444,9 @@ static void lapb_state3_machine(struct lapb_cb *lapb, struct sk_buff *skb, break; case LAPB_FRMR: - lapb_dbg(1, "(%p) S3 RX FRMR(%d) %02X %02X %02X %02X %02X\n", + lapb_dbg(1, "(%p) S3 RX FRMR(%d) %5ph\n", lapb->dev, frame->pf, - skb->data[0], skb->data[1], skb->data[2], - skb->data[3], skb->data[4]); + skb->data); lapb_establish_data_link(lapb); lapb_dbg(0, "(%p) S3 -> S1\n", lapb->dev); lapb_requeue_frames(lapb); diff --git a/net/lapb/lapb_out.c b/net/lapb/lapb_out.c index ba4d015bd1a6..482c94d9d958 100644 --- a/net/lapb/lapb_out.c +++ b/net/lapb/lapb_out.c @@ -148,9 +148,7 @@ void lapb_transmit_buffer(struct lapb_cb *lapb, struct sk_buff *skb, int type) } } - lapb_dbg(2, "(%p) S%d TX %02X %02X %02X\n", - lapb->dev, lapb->state, - skb->data[0], skb->data[1], skb->data[2]); + lapb_dbg(2, "(%p) S%d TX %3ph\n", lapb->dev, lapb->state, skb->data); if (!lapb_data_transmit(lapb, skb)) kfree_skb(skb); diff --git a/net/lapb/lapb_subr.c b/net/lapb/lapb_subr.c index 9d0a426eccbb..3c1914df641f 100644 --- a/net/lapb/lapb_subr.c +++ b/net/lapb/lapb_subr.c @@ -113,9 +113,7 @@ int lapb_decode(struct lapb_cb *lapb, struct sk_buff *skb, { frame->type = LAPB_ILLEGAL; - lapb_dbg(2, "(%p) S%d RX %02X %02X %02X\n", - lapb->dev, lapb->state, - skb->data[0], skb->data[1], skb->data[2]); + lapb_dbg(2, "(%p) S%d RX %3ph\n", lapb->dev, lapb->state, skb->data); /* We always need to look at 2 bytes, sometimes we need * to look at 3 and those cases are handled below. @@ -284,10 +282,9 @@ void lapb_transmit_frmr(struct lapb_cb *lapb) dptr++; *dptr++ = lapb->frmr_type; - lapb_dbg(1, "(%p) S%d TX FRMR %02X %02X %02X %02X %02X\n", + lapb_dbg(1, "(%p) S%d TX FRMR %5ph\n", lapb->dev, lapb->state, - skb->data[1], skb->data[2], skb->data[3], - skb->data[4], skb->data[5]); + &skb->data[1]); } else { dptr = skb_put(skb, 4); *dptr++ = LAPB_FRMR; @@ -299,9 +296,8 @@ void lapb_transmit_frmr(struct lapb_cb *lapb) dptr++; *dptr++ = lapb->frmr_type; - lapb_dbg(1, "(%p) S%d TX FRMR %02X %02X %02X\n", - lapb->dev, lapb->state, skb->data[1], - skb->data[2], skb->data[3]); + lapb_dbg(1, "(%p) S%d TX FRMR %3ph\n", + lapb->dev, lapb->state, &skb->data[1]); } lapb_transmit_buffer(lapb, skb, LAPB_RESPONSE); -- cgit v1.2.3 From 86651650d16a359e4142c6a8b0467c87e48c4c94 Mon Sep 17 00:00:00 2001 From: Elad Kanfi Date: Thu, 26 May 2016 15:00:06 +0300 Subject: net: nps_enet: Disable interrupts before napi reschedule Since NAPI works by shutting down event interrupts when theres work and turning them on when theres none, the net driver must make sure that interrupts are disabled when it reschedules polling. By calling napi_reschedule, the driver switches to polling mode, therefor there should be no interrupt interference. Any received packets will be handled in nps_enet_poll by polling the HW indication of received packet until all packets are handled. Signed-off-by: Elad Kanfi Acked-by: Noam Camus Tested-by: Alexey Brodkin Signed-off-by: David S. Miller --- drivers/net/ethernet/ezchip/nps_enet.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c index 085f9125cf42..06f031715b57 100644 --- a/drivers/net/ethernet/ezchip/nps_enet.c +++ b/drivers/net/ethernet/ezchip/nps_enet.c @@ -205,8 +205,10 @@ static int nps_enet_poll(struct napi_struct *napi, int budget) * re-adding ourselves to the poll list. */ - if (priv->tx_skb && !tx_ctrl_ct) + if (priv->tx_skb && !tx_ctrl_ct) { + nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0); napi_reschedule(napi); + } } return work_done; -- cgit v1.2.3 From 421eeea10d0a5e52256bce9544de477938104fdb Mon Sep 17 00:00:00 2001 From: Baozeng Ding Date: Thu, 26 May 2016 21:07:42 +0800 Subject: ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr Fix a logic error to avoid potential null pointer dereference. Signed-off-by: Baozeng Ding Reviewed-by: Stefan Schmidt Signed-off-by: David S. Miller --- net/ieee802154/nl802154.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c index ca207dbf673b..116187b5c267 100644 --- a/net/ieee802154/nl802154.c +++ b/net/ieee802154/nl802154.c @@ -1289,8 +1289,8 @@ ieee802154_llsec_parse_dev_addr(struct nlattr *nla, nl802154_dev_addr_policy)) return -EINVAL; - if (!attrs[NL802154_DEV_ADDR_ATTR_PAN_ID] && - !attrs[NL802154_DEV_ADDR_ATTR_MODE] && + if (!attrs[NL802154_DEV_ADDR_ATTR_PAN_ID] || + !attrs[NL802154_DEV_ADDR_ATTR_MODE] || !(attrs[NL802154_DEV_ADDR_ATTR_SHORT] || attrs[NL802154_DEV_ADDR_ATTR_EXTENDED])) return -EINVAL; -- cgit v1.2.3 From 68bb399e656f244d3d173a20a8280c167632fca8 Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Thu, 26 May 2016 21:46:05 +0100 Subject: sfc: use flow dissector helpers for aRFS Signed-off-by: Edward Cree Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/rx.c | 75 ++++++++++++------------------------------- 1 file changed, 21 insertions(+), 54 deletions(-) diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c index 8956995b2fe7..9d6cc8b92ba0 100644 --- a/drivers/net/ethernet/sfc/rx.c +++ b/drivers/net/ethernet/sfc/rx.c @@ -842,33 +842,15 @@ int efx_filter_rfs(struct net_device *net_dev, const struct sk_buff *skb, struct efx_nic *efx = netdev_priv(net_dev); struct efx_channel *channel; struct efx_filter_spec spec; - const __be16 *ports; - __be16 ether_type; - int nhoff; + struct flow_keys fk; int rc; - /* The core RPS/RFS code has already parsed and validated - * VLAN, IP and transport headers. We assume they are in the - * header area. - */ - - if (skb->protocol == htons(ETH_P_8021Q)) { - const struct vlan_hdr *vh = - (const struct vlan_hdr *)skb->data; - - /* We can't filter on the IP 5-tuple and the vlan - * together, so just strip the vlan header and filter - * on the IP part. - */ - EFX_BUG_ON_PARANOID(skb_headlen(skb) < sizeof(*vh)); - ether_type = vh->h_vlan_encapsulated_proto; - nhoff = sizeof(struct vlan_hdr); - } else { - ether_type = skb->protocol; - nhoff = 0; - } + if (!skb_flow_dissect_flow_keys(skb, &fk, 0)) + return -EPROTONOSUPPORT; - if (ether_type != htons(ETH_P_IP) && ether_type != htons(ETH_P_IPV6)) + if (fk.basic.n_proto != htons(ETH_P_IP) && fk.basic.n_proto != htons(ETH_P_IPV6)) + return -EPROTONOSUPPORT; + if (fk.control.flags & FLOW_DIS_IS_FRAGMENT) return -EPROTONOSUPPORT; efx_filter_init_rx(&spec, EFX_FILTER_PRI_HINT, @@ -878,34 +860,19 @@ int efx_filter_rfs(struct net_device *net_dev, const struct sk_buff *skb, EFX_FILTER_MATCH_ETHER_TYPE | EFX_FILTER_MATCH_IP_PROTO | EFX_FILTER_MATCH_LOC_HOST | EFX_FILTER_MATCH_LOC_PORT | EFX_FILTER_MATCH_REM_HOST | EFX_FILTER_MATCH_REM_PORT; - spec.ether_type = ether_type; - - if (ether_type == htons(ETH_P_IP)) { - const struct iphdr *ip = - (const struct iphdr *)(skb->data + nhoff); - - EFX_BUG_ON_PARANOID(skb_headlen(skb) < nhoff + sizeof(*ip)); - if (ip_is_fragment(ip)) - return -EPROTONOSUPPORT; - spec.ip_proto = ip->protocol; - spec.rem_host[0] = ip->saddr; - spec.loc_host[0] = ip->daddr; - EFX_BUG_ON_PARANOID(skb_headlen(skb) < nhoff + 4 * ip->ihl + 4); - ports = (const __be16 *)(skb->data + nhoff + 4 * ip->ihl); + spec.ether_type = fk.basic.n_proto; + spec.ip_proto = fk.basic.ip_proto; + + if (fk.basic.n_proto == htons(ETH_P_IP)) { + spec.rem_host[0] = fk.addrs.v4addrs.src; + spec.loc_host[0] = fk.addrs.v4addrs.dst; } else { - const struct ipv6hdr *ip6 = - (const struct ipv6hdr *)(skb->data + nhoff); - - EFX_BUG_ON_PARANOID(skb_headlen(skb) < - nhoff + sizeof(*ip6) + 4); - spec.ip_proto = ip6->nexthdr; - memcpy(spec.rem_host, &ip6->saddr, sizeof(ip6->saddr)); - memcpy(spec.loc_host, &ip6->daddr, sizeof(ip6->daddr)); - ports = (const __be16 *)(ip6 + 1); + memcpy(spec.rem_host, &fk.addrs.v6addrs.src, sizeof(struct in6_addr)); + memcpy(spec.loc_host, &fk.addrs.v6addrs.dst, sizeof(struct in6_addr)); } - spec.rem_port = ports[0]; - spec.loc_port = ports[1]; + spec.rem_port = fk.ports.src; + spec.loc_port = fk.ports.dst; rc = efx->type->filter_rfs_insert(efx, &spec); if (rc < 0) @@ -916,18 +883,18 @@ int efx_filter_rfs(struct net_device *net_dev, const struct sk_buff *skb, channel = efx_get_channel(efx, skb_get_rx_queue(skb)); ++channel->rfs_filters_added; - if (ether_type == htons(ETH_P_IP)) + if (spec.ether_type == htons(ETH_P_IP)) netif_info(efx, rx_status, efx->net_dev, "steering %s %pI4:%u:%pI4:%u to queue %u [flow %u filter %d]\n", (spec.ip_proto == IPPROTO_TCP) ? "TCP" : "UDP", - spec.rem_host, ntohs(ports[0]), spec.loc_host, - ntohs(ports[1]), rxq_index, flow_id, rc); + spec.rem_host, ntohs(spec.rem_port), spec.loc_host, + ntohs(spec.loc_port), rxq_index, flow_id, rc); else netif_info(efx, rx_status, efx->net_dev, "steering %s [%pI6]:%u:[%pI6]:%u to queue %u [flow %u filter %d]\n", (spec.ip_proto == IPPROTO_TCP) ? "TCP" : "UDP", - spec.rem_host, ntohs(ports[0]), spec.loc_host, - ntohs(ports[1]), rxq_index, flow_id, rc); + spec.rem_host, ntohs(spec.rem_port), spec.loc_host, + ntohs(spec.loc_port), rxq_index, flow_id, rc); return rc; } -- cgit v1.2.3 From 176b346b37f0b9c03e91eb6f1460e00f3c0c3edf Mon Sep 17 00:00:00 2001 From: Eric Garver Date: Thu, 26 May 2016 12:28:05 -0400 Subject: Documentation: ip-sysctl.txt: clarify secure_redirects Clarify how secure_redirects works. Mention that RFC1122 always applies. Signed-off-by: Eric Garver Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 6c7f365b1515..9ae929395b24 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1036,15 +1036,17 @@ proxy_arp_pvlan - BOOLEAN shared_media - BOOLEAN Send(router) or accept(host) RFC1620 shared media redirects. - Overrides ip_secure_redirects. + Overrides secure_redirects. shared_media for the interface will be enabled if at least one of conf/{all,interface}/shared_media is set to TRUE, it will be disabled otherwise default TRUE secure_redirects - BOOLEAN - Accept ICMP redirect messages only for gateways, - listed in default gateway list. + Accept ICMP redirect messages only to gateways listed in the + interface's current gateway list. Even if disabled, RFC1122 redirect + rules still apply. + Overridden by shared_media. secure_redirects for the interface will be enabled if at least one of conf/{all,interface}/secure_redirects is set to TRUE, it will be disabled otherwise -- cgit v1.2.3 From bebef39842c8615180e711c0ff3e8c9c40c397da Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 2 May 2016 12:59:48 +0200 Subject: drm/sun4i: add COMMON_CLK dependency The sun4i drm driver uses the clk-provider interfaces, which are not available when CONFIG_COMMON_CLK is disabled: drivers/gpu/drm/sun4i/sun4i_dotclock.c:19:16: error: field 'hw' has incomplete type struct clk_hw hw; In file included from ../include/asm-generic/bug.h:13:0, from ../arch/arm/include/asm/bug.h:59, from ../include/linux/bug.h:4, from ../include/linux/io.h:23, from ../include/linux/clk-provider.h:14, from ../drivers/gpu/drm/sun4i/sun4i_dotclock.c:13: drivers/gpu/drm/sun4i/sun4i_dotclock.c: In function 'hw_to_dclk': include/linux/kernel.h:831:48: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] ... This adds a Kconfig dependency to prevent the driver from being enabled in this case. Signed-off-by: Arnd Bergmann Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig index 99510e64e91a..a4b357db8856 100644 --- a/drivers/gpu/drm/sun4i/Kconfig +++ b/drivers/gpu/drm/sun4i/Kconfig @@ -1,6 +1,6 @@ config DRM_SUN4I tristate "DRM Support for Allwinner A10 Display Engine" - depends on DRM && ARM + depends on DRM && ARM && COMMON_CLK depends on ARCH_SUNXI || COMPILE_TEST select DRM_GEM_CMA_HELPER select DRM_KMS_HELPER -- cgit v1.2.3 From f1b78f0e759b174ec4f5e3b0dd27a079a2416b66 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 3 May 2016 17:23:28 +0200 Subject: drm: sun4i: print DMA address correctly The newly added sun4i drm driver prints a dma address using the %x format string, which cannot work when dma_addr_t is 64 bit, and gcc warns about this configuration: drm/sun4i/sun4i_backend.c: In function 'sun4i_backend_update_layer_buffer': drm/sun4i/sun4i_backend.c:193:84: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=] DRM_DEBUG_DRIVER("Using GEM @ 0x%x\n", gem->paddr); drm/sun4i/sun4i_backend.c:201:84: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=] DRM_DEBUG_DRIVER("Setting buffer address to 0x%x\n", paddr); This changes the code to use the explicit %pad format string, which always prints the right length. Signed-off-by: Arnd Bergmann Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_backend.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c index f7a15c1a93bf..3ab560450a82 100644 --- a/drivers/gpu/drm/sun4i/sun4i_backend.c +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c @@ -190,7 +190,7 @@ int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend, /* Get the physical address of the buffer in memory */ gem = drm_fb_cma_get_gem_obj(fb, 0); - DRM_DEBUG_DRIVER("Using GEM @ 0x%x\n", gem->paddr); + DRM_DEBUG_DRIVER("Using GEM @ %pad\n", &gem->paddr); /* Compute the start of the displayed memory */ bpp = drm_format_plane_cpp(fb->pixel_format, 0); @@ -198,7 +198,7 @@ int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend, paddr += (state->src_x >> 16) * bpp; paddr += (state->src_y >> 16) * fb->pitches[0]; - DRM_DEBUG_DRIVER("Setting buffer address to 0x%x\n", paddr); + DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &paddr); /* Write the 32 lower bits of the address (in bits) */ lo_paddr = paddr << 3; -- cgit v1.2.3 From 9fa2568d9fe0c6dbf3253af6840de9389f4e89cb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 5 May 2016 22:10:52 +0200 Subject: drm: sun4i: fix probe error handling gcc points out a possible uninitialized variable use in sun4i_dclk_create(): drivers/gpu/drm/sun4i/sun4i_dotclock.c: In function 'sun4i_dclk_create': drivers/gpu/drm/sun4i/sun4i_dotclock.c:139:12: error: 'clk_name' may be used uninitialized in this function [-Werror=maybe-uninitialized] init.name = clk_name; The warning only shows up when CONFIG_OF is disabled, and the property is never filled, but the same bug can show up even when CONFIG_OF is enabled but of_property_read_string_index returns another error. To fix it, this ensures that sun4i_dclk_create propagates any error from of_property_read_string_index. Signed-off-by: Arnd Bergmann Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_dotclock.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_dotclock.c b/drivers/gpu/drm/sun4i/sun4i_dotclock.c index 3ff668cb463c..6c9c090a8006 100644 --- a/drivers/gpu/drm/sun4i/sun4i_dotclock.c +++ b/drivers/gpu/drm/sun4i/sun4i_dotclock.c @@ -127,10 +127,14 @@ int sun4i_dclk_create(struct device *dev, struct sun4i_tcon *tcon) const char *clk_name, *parent_name; struct clk_init_data init; struct sun4i_dclk *dclk; + int ret; parent_name = __clk_get_name(tcon->sclk0); - of_property_read_string_index(dev->of_node, "clock-output-names", 0, - &clk_name); + ret = of_property_read_string_index(dev->of_node, + "clock-output-names", 0, + &clk_name); + if (ret) + return ret; dclk = devm_kzalloc(dev, sizeof(*dclk), GFP_KERNEL); if (!dclk) -- cgit v1.2.3 From 4731a72df273bdbd225445424057c15dbb8d3495 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 2 Apr 2016 12:30:11 +0200 Subject: drm/sun4i: request exact rates to our parents Our pixel clock currently only tries to deal with the current parent rate. While that works when the resolution is the same than the one already program, or when we can compute directly the rate from the current parent rate, it cannot work in most situation when we want to change the frequency, and we end up with an improper pixel clock rate, which obviously doesn't work as expected. Ask our parent for all the possible dividers if it can reach that frequency, and return the best parent rate to the clock framework so that we can use it. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_dotclock.c | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_dotclock.c b/drivers/gpu/drm/sun4i/sun4i_dotclock.c index 6c9c090a8006..5b3463197c48 100644 --- a/drivers/gpu/drm/sun4i/sun4i_dotclock.c +++ b/drivers/gpu/drm/sun4i/sun4i_dotclock.c @@ -72,14 +72,40 @@ static unsigned long sun4i_dclk_recalc_rate(struct clk_hw *hw, static long sun4i_dclk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate) { - return *parent_rate / DIV_ROUND_CLOSEST(*parent_rate, rate); + unsigned long best_parent = 0; + u8 best_div = 1; + int i; + + for (i = 6; i < 127; i++) { + unsigned long ideal = rate * i; + unsigned long rounded; + + rounded = clk_hw_round_rate(clk_hw_get_parent(hw), + ideal); + + if (rounded == ideal) { + best_parent = rounded; + best_div = i; + goto out; + } + + if ((rounded < ideal) && (rounded > best_parent)) { + best_parent = rounded; + best_div = i; + } + } + +out: + *parent_rate = best_parent; + + return best_parent / best_div; } static int sun4i_dclk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct sun4i_dclk *dclk = hw_to_dclk(hw); - int div = DIV_ROUND_CLOSEST(parent_rate, rate); + u8 div = parent_rate / rate; return regmap_update_bits(dclk->regmap, SUN4I_TCON0_DCLK_REG, GENMASK(6, 0), div); @@ -144,6 +170,7 @@ int sun4i_dclk_create(struct device *dev, struct sun4i_tcon *tcon) init.ops = &sun4i_dclk_ops; init.parent_names = &parent_name; init.num_parents = 1; + init.flags = CLK_SET_RATE_PARENT; dclk->regmap = tcon->regs; dclk->hw.init = &init; -- cgit v1.2.3 From bb43d40d7c830da5f623e3938fef908b003b7523 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 21 Apr 2016 11:25:26 +0200 Subject: drm/sun4i: rgb: Validate the clock rate Our pixel clock cannot reach a high enough rate for some rather high while common resolutions (like 1080p60). Make sure we filter the resolutions we cannot reach in our mode_valid function. Fixes: 29e57fab97fc ("drm: sun4i: Add RGB output") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_rgb.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c index ab6494818050..fe7ef52a9346 100644 --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -54,8 +54,13 @@ static int sun4i_rgb_get_modes(struct drm_connector *connector) static int sun4i_rgb_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct sun4i_rgb *rgb = drm_connector_to_sun4i_rgb(connector); + struct sun4i_drv *drv = rgb->drv; + struct sun4i_tcon *tcon = drv->tcon; u32 hsync = mode->hsync_end - mode->hsync_start; u32 vsync = mode->vsync_end - mode->vsync_start; + unsigned long rate = mode->clock * 1000; + long rounded_rate; DRM_DEBUG_DRIVER("Validating modes...\n"); @@ -87,6 +92,15 @@ static int sun4i_rgb_mode_valid(struct drm_connector *connector, DRM_DEBUG_DRIVER("Vertical parameters OK\n"); + rounded_rate = clk_round_rate(tcon->dclk, rate); + if (rounded_rate < rate) + return MODE_CLOCK_LOW; + + if (rounded_rate > rate) + return MODE_CLOCK_HIGH; + + DRM_DEBUG_DRIVER("Clock rate OK\n"); + return MODE_OK; } -- cgit v1.2.3 From 0bbbb00bda57e6f091275b0103445596322b9277 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 4 May 2016 17:38:32 +0200 Subject: drm/sun4i: defer only if we didn't find our panel Our code currently defers our probe on any error, even if we were not expecting to have one at all. Make sure we return -EPROBE_DEFER only when we were supposed to have a panel, but it's not probed yet. Also fix a typo while we're at it. Fixes: 29e57fab97fc ("drm: sun4i: Add RGB output") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 9f19b0e08560..16ab426ffa34 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -425,11 +425,11 @@ static struct drm_panel *sun4i_tcon_find_panel(struct device_node *node) remote = of_graph_get_remote_port_parent(end_node); if (!remote) { - DRM_DEBUG_DRIVER("Enable to parse remote node\n"); + DRM_DEBUG_DRIVER("Unable to parse remote node\n"); return ERR_PTR(-EINVAL); } - return of_drm_find_panel(remote); + return of_drm_find_panel(remote) ?: ERR_PTR(-EPROBE_DEFER); } static int sun4i_tcon_bind(struct device *dev, struct device *master, @@ -522,12 +522,13 @@ static int sun4i_tcon_probe(struct platform_device *pdev) * Defer the probe. */ panel = sun4i_tcon_find_panel(node); - if (IS_ERR(panel)) { - /* - * If we don't have a panel endpoint, just go on - */ - if (PTR_ERR(panel) != -ENODEV) - return -EPROBE_DEFER; + + /* + * If we don't have a panel endpoint, just go on + */ + if (PTR_ERR(panel) == -EPROBE_DEFER) { + DRM_DEBUG_DRIVER("Still waiting for our panel. Deferring...\n"); + return -EPROBE_DEFER; } return component_add(&pdev->dev, &sun4i_tcon_ops); -- cgit v1.2.3 From 0de6e914a035076b1241f5738c06c9d3820abd6e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 4 May 2016 17:37:58 +0200 Subject: drm/sun4i: rgb: panel is an error pointer In case of an error, our pointer to the drm_panel structure attached to our encoder will hold an error pointer, not a NULL pointer. Make sure we check the right thing. Fixes: 29e57fab97fc ("drm: sun4i: Add RGB output") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_rgb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c index fe7ef52a9346..aaffe9e64ffb 100644 --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -217,7 +217,7 @@ int sun4i_rgb_init(struct drm_device *drm) int ret; /* If we don't have a panel, there's no point in going on */ - if (!tcon->panel) + if (IS_ERR(tcon->panel)) return -ENODEV; rgb = devm_kzalloc(drm->dev, sizeof(*rgb), GFP_KERNEL); -- cgit v1.2.3 From 3d6bd9065b7acf8499d414d70bdb4b4955856299 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 11 May 2016 16:52:50 +0200 Subject: drm/sun4i: remove simplefb at probe If simplefb was setup by our bootloader and enabled in the DT, we will have a first framebuffer loaded in our system. However, as soon as our DRM driver will load, it will reset the controller, initialise it and, if the framebuffer emulation is enabled, register a second framebuffer device. This is obviously pretty bad, since the first framebuffer will be some kind of a black hole, with memory still reserved that we can write to safely, but not displayed anywhere. Make sure we remove that framebuffer when we probe so we don't end up in that situation. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_drv.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index 76e922bb60e5..af62b24c39b1 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -125,6 +125,22 @@ static struct drm_driver sun4i_drv_driver = { .disable_vblank = sun4i_drv_disable_vblank, }; +static void sun4i_remove_framebuffers(void) +{ + struct apertures_struct *ap; + + ap = alloc_apertures(1); + if (!ap) + return; + + /* The framebuffer can be located anywhere in RAM */ + ap->ranges[0].base = 0; + ap->ranges[0].size = ~0; + + remove_conflicting_framebuffers(ap, "sun4i-drm-fb", false); + kfree(ap); +} + static int sun4i_drv_bind(struct device *dev) { struct drm_device *drm; @@ -172,6 +188,9 @@ static int sun4i_drv_bind(struct device *dev) } drm->irq_enabled = true; + /* Remove early framebuffers (ie. simplefb) */ + sun4i_remove_framebuffers(); + /* Create our framebuffer */ drv->fbdev = sun4i_framebuffer_init(drm); if (IS_ERR(drv->fbdev)) { -- cgit v1.2.3 From 7aa2e2b731b337a7bc74cd076bbcd6b8b4b95fbf Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 11 May 2016 19:04:18 +0200 Subject: drm/sun4i: Convert to connector register helpers Now that connector register helpers have been created, switch to them. Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_drv.c | 31 ++----------------------------- 1 file changed, 2 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index af62b24c39b1..257d2b4f3645 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -24,34 +24,6 @@ #include "sun4i_layer.h" #include "sun4i_tcon.h" -static int sun4i_drv_connector_plug_all(struct drm_device *drm) -{ - struct drm_connector *connector, *failed; - int ret; - - mutex_lock(&drm->mode_config.mutex); - list_for_each_entry(connector, &drm->mode_config.connector_list, head) { - ret = drm_connector_register(connector); - if (ret) { - failed = connector; - goto err; - } - } - mutex_unlock(&drm->mode_config.mutex); - return 0; - -err: - list_for_each_entry(connector, &drm->mode_config.connector_list, head) { - if (failed == connector) - break; - - drm_connector_unregister(connector); - } - mutex_unlock(&drm->mode_config.mutex); - - return ret; -} - static int sun4i_drv_enable_vblank(struct drm_device *drm, unsigned int pipe) { struct sun4i_drv *drv = drm->dev_private; @@ -206,7 +178,7 @@ static int sun4i_drv_bind(struct device *dev) if (ret) goto free_drm; - ret = sun4i_drv_connector_plug_all(drm); + ret = drm_connector_register_all(drm); if (ret) goto unregister_drm; @@ -223,6 +195,7 @@ static void sun4i_drv_unbind(struct device *dev) { struct drm_device *drm = dev_get_drvdata(dev); + drm_connector_unregister_all(drm); drm_dev_unregister(drm); drm_kms_helper_poll_fini(drm); sun4i_framebuffer_free(drm); -- cgit v1.2.3 From 13fef095bde04228316046f997eb963285d8532e Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 17 May 2016 23:56:06 +0800 Subject: drm: sun4i: do cleanup if RGB output init fails sun4i_rgb_init() can fail, which results in TCON failing to bind. In this case we need to do cleanup, specificly unregistering the dotclock, which is regmap based, and the regmap is registered as part of the sun4i_tcon_bind(). Failing to do so results in a NULL pointer reference when the CCF tries to turn off unused clocks. Fixes: 29e57fab97fc ("drm: sun4i: Add RGB output") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 16ab426ffa34..652385f09735 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -490,7 +490,11 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, return 0; } - return sun4i_rgb_init(drm); + ret = sun4i_rgb_init(drm); + if (ret < 0) + goto err_free_clocks; + + return 0; err_free_clocks: sun4i_tcon_free_clocks(tcon); -- cgit v1.2.3 From 0e6b5259824e97a0f7e7b450421ff12865d3b0e2 Mon Sep 17 00:00:00 2001 From: Shmulik Ladkani Date: Thu, 26 May 2016 20:16:36 +0300 Subject: net: l2tp: Make l2tp_ip6 namespace aware l2tp_ip6 tunnel and session lookups were still using init_net, although the l2tp core infrastructure already supports lookups keyed by 'net'. As a result, l2tp_ip6_recv discarded packets for tunnels/sessions created in namespaces other than the init_net. Fix, by using dev_net(skb->dev) or sock_net(sk) where appropriate. Signed-off-by: Shmulik Ladkani Signed-off-by: David S. Miller --- net/l2tp/l2tp_ip6.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c index c6f5df1bed12..6c54e03fe9c1 100644 --- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -128,6 +128,7 @@ static inline struct sock *l2tp_ip6_bind_lookup(struct net *net, */ static int l2tp_ip6_recv(struct sk_buff *skb) { + struct net *net = dev_net(skb->dev); struct sock *sk; u32 session_id; u32 tunnel_id; @@ -154,7 +155,7 @@ static int l2tp_ip6_recv(struct sk_buff *skb) } /* Ok, this is a data packet. Lookup the session. */ - session = l2tp_session_find(&init_net, NULL, session_id); + session = l2tp_session_find(net, NULL, session_id); if (session == NULL) goto discard; @@ -188,14 +189,14 @@ pass_up: goto discard; tunnel_id = ntohl(*(__be32 *) &skb->data[4]); - tunnel = l2tp_tunnel_find(&init_net, tunnel_id); + tunnel = l2tp_tunnel_find(net, tunnel_id); if (tunnel != NULL) sk = tunnel->sock; else { struct ipv6hdr *iph = ipv6_hdr(skb); read_lock_bh(&l2tp_ip6_lock); - sk = __l2tp_ip6_bind_lookup(&init_net, &iph->daddr, + sk = __l2tp_ip6_bind_lookup(net, &iph->daddr, 0, tunnel_id); read_unlock_bh(&l2tp_ip6_lock); } @@ -263,6 +264,7 @@ static int l2tp_ip6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) struct inet_sock *inet = inet_sk(sk); struct ipv6_pinfo *np = inet6_sk(sk); struct sockaddr_l2tpip6 *addr = (struct sockaddr_l2tpip6 *) uaddr; + struct net *net = sock_net(sk); __be32 v4addr = 0; int addr_type; int err; @@ -286,7 +288,7 @@ static int l2tp_ip6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) err = -EADDRINUSE; read_lock_bh(&l2tp_ip6_lock); - if (__l2tp_ip6_bind_lookup(&init_net, &addr->l2tp_addr, + if (__l2tp_ip6_bind_lookup(net, &addr->l2tp_addr, sk->sk_bound_dev_if, addr->l2tp_conn_id)) goto out_in_use; read_unlock_bh(&l2tp_ip6_lock); @@ -456,7 +458,7 @@ static int l2tp_ip6_backlog_recv(struct sock *sk, struct sk_buff *skb) return 0; drop: - IP_INC_STATS(&init_net, IPSTATS_MIB_INDISCARDS); + IP_INC_STATS(sock_net(sk), IPSTATS_MIB_INDISCARDS); kfree_skb(skb); return -1; } -- cgit v1.2.3 From a6d206e28abe468aac5bb589669c6beb855b1a66 Mon Sep 17 00:00:00 2001 From: Steve Longerbeam Date: Wed, 27 Apr 2016 16:23:33 -0400 Subject: drm/imx: imx-ldb: Add DDC support Add support for reading EDID over Display Data Channel. If no DDC adapter is available, falls back to hardcoded EDID or display-timings node as before. Signed-off-by: Steve Longerbeam Signed-off-by: Akshay Bhat Acked-by: Philipp Zabel Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-ldb.c | 42 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 34 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index a58eee59550a..f506e8dd76cb 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -59,6 +59,7 @@ struct imx_ldb_channel { struct drm_encoder encoder; struct drm_panel *panel; struct device_node *child; + struct i2c_adapter *ddc; int chno; void *edid; int edid_len; @@ -107,6 +108,9 @@ static int imx_ldb_connector_get_modes(struct drm_connector *connector) return num_modes; } + if (!imx_ldb_ch->edid && imx_ldb_ch->ddc) + imx_ldb_ch->edid = drm_get_edid(connector, imx_ldb_ch->ddc); + if (imx_ldb_ch->edid) { drm_mode_connector_update_edid_property(connector, imx_ldb_ch->edid); @@ -553,6 +557,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) for_each_child_of_node(np, child) { struct imx_ldb_channel *channel; + struct device_node *ddc_node; struct device_node *port; ret = of_property_read_u32(child, "reg", &i); @@ -595,14 +600,34 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) } } - edidp = of_get_property(child, "edid", &channel->edid_len); - if (edidp) { - channel->edid = kmemdup(edidp, channel->edid_len, - GFP_KERNEL); - } else if (!channel->panel) { - ret = of_get_drm_display_mode(child, &channel->mode, 0); - if (!ret) - channel->mode_valid = 1; + ddc_node = of_parse_phandle(child, "ddc-i2c-bus", 0); + if (ddc_node) { + channel->ddc = of_find_i2c_adapter_by_node(ddc_node); + of_node_put(ddc_node); + if (!channel->ddc) { + dev_warn(dev, "failed to get ddc i2c adapter\n"); + return -EPROBE_DEFER; + } + } + + if (!channel->ddc) { + /* if no DDC available, fallback to hardcoded EDID */ + dev_dbg(dev, "no ddc available\n"); + + edidp = of_get_property(child, "edid", + &channel->edid_len); + if (edidp) { + channel->edid = kmemdup(edidp, + channel->edid_len, + GFP_KERNEL); + } else if (!channel->panel) { + /* fallback to display-timings node */ + ret = of_get_drm_display_mode(child, + &channel->mode, + 0); + if (!ret) + channel->mode_valid = 1; + } } channel->bus_format = of_get_bus_format(dev, child); @@ -647,6 +672,7 @@ static void imx_ldb_unbind(struct device *dev, struct device *master, channel->encoder.funcs->destroy(&channel->encoder); kfree(channel->edid); + i2c_put_adapter(channel->ddc); } } -- cgit v1.2.3 From ee89686631174fa576e61400ac3580722edac120 Mon Sep 17 00:00:00 2001 From: Akshay Bhat Date: Wed, 27 Apr 2016 16:23:34 -0400 Subject: dt-bindings: imx: ldb: Add ddc-i2c-bus property Document the ddc-i2c-bus property used by imx-ldb driver to read EDID information via I2C interface. Signed-off-by: Akshay Bhat Acked-by: Rob Herring Signed-off-by: Philipp Zabel --- Documentation/devicetree/bindings/display/imx/ldb.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt index 0a175d991b52..a407462c885e 100644 --- a/Documentation/devicetree/bindings/display/imx/ldb.txt +++ b/Documentation/devicetree/bindings/display/imx/ldb.txt @@ -62,6 +62,7 @@ Required properties: display-timings are used instead. Optional properties (required if display-timings are used): + - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing - display-timings : A node that describes the display timings as defined in Documentation/devicetree/bindings/display/display-timing.txt. - fsl,data-mapping : should be "spwg" or "jeida" -- cgit v1.2.3 From 620011e0477e485fc6112ace3c0a772130e8fd4f Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 3 May 2016 14:37:13 +0200 Subject: drm/imx: imx-ldb: use of_graph_get_endpoint_by_regs helper Instead of using of_graph_get_port_by_id() to get the port and then of_get_child_by_name() to get the first endpoint, get to the endpoint in a single step. Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-ldb.c | 35 ++++++++++++++++++----------------- 1 file changed, 18 insertions(+), 17 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index f506e8dd76cb..5f8f0bf45a62 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -558,7 +558,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) for_each_child_of_node(np, child) { struct imx_ldb_channel *channel; struct device_node *ddc_node; - struct device_node *port; + struct device_node *ep; ret = of_property_read_u32(child, "reg", &i); if (ret || i < 0 || i > 1) @@ -581,22 +581,23 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) * The output port is port@4 with an external 4-port mux or * port@2 with the internal 2-port mux. */ - port = of_graph_get_port_by_id(child, imx_ldb->lvds_mux ? 4 : 2); - if (port) { - struct device_node *endpoint, *remote; - - endpoint = of_get_child_by_name(port, "endpoint"); - if (endpoint) { - remote = of_graph_get_remote_port_parent(endpoint); - if (remote) - channel->panel = of_drm_find_panel(remote); - else - return -EPROBE_DEFER; - if (!channel->panel) { - dev_err(dev, "panel not found: %s\n", - remote->full_name); - return -EPROBE_DEFER; - } + ep = of_graph_get_endpoint_by_regs(child, + imx_ldb->lvds_mux ? 4 : 2, + -1); + if (ep) { + struct device_node *remote; + + remote = of_graph_get_remote_port_parent(ep); + of_node_put(ep); + if (remote) + channel->panel = of_drm_find_panel(remote); + else + return -EPROBE_DEFER; + of_node_put(remote); + if (!channel->panel) { + dev_err(dev, "panel not found: %s\n", + remote->full_name); + return -EPROBE_DEFER; } } -- cgit v1.2.3 From 3a1c117f8bf13435f6db78f294d5754b2eb6185b Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 3 May 2016 14:39:29 +0200 Subject: drm/imx: parallel-display: use of_graph_get_endpoint_by_regs helper Instead of using of_graph_get_port_by_id() to get the port and then of_get_child_by_name() to get the first endpoint, get to the endpoint in a single step. Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/parallel-display.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c index 363e2c7741e2..27755ecbf516 100644 --- a/drivers/gpu/drm/imx/parallel-display.c +++ b/drivers/gpu/drm/imx/parallel-display.c @@ -203,7 +203,7 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) { struct drm_device *drm = data; struct device_node *np = dev->of_node; - struct device_node *port; + struct device_node *ep; const u8 *edidp; struct imx_parallel_display *imxpd; int ret; @@ -230,18 +230,18 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) } /* port@1 is the output port */ - port = of_graph_get_port_by_id(np, 1); - if (port) { - struct device_node *endpoint, *remote; - - endpoint = of_get_child_by_name(port, "endpoint"); - if (endpoint) { - remote = of_graph_get_remote_port_parent(endpoint); - if (remote) - imxpd->panel = of_drm_find_panel(remote); - if (!imxpd->panel) - return -EPROBE_DEFER; + ep = of_graph_get_endpoint_by_regs(np, 1, -1); + if (ep) { + struct device_node *remote; + + remote = of_graph_get_remote_port_parent(ep); + of_node_put(ep); + if (remote) { + imxpd->panel = of_drm_find_panel(remote); + of_node_put(remote); } + if (!imxpd->panel) + return -EPROBE_DEFER; } imxpd->dev = dev; -- cgit v1.2.3 From 7932131f6381e5d2d4a78d9134f5f6bf45900ae5 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 12 Feb 2016 14:35:55 +0100 Subject: drm/imx: ipuv3-plane: enable UYVY and VYUY formats Advertise the DRM_FORMAT_UYVY and DRM_FORMAT_VYUY formats to userspace. Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index 681ec6eb77d9..8c24df787884 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -38,6 +38,8 @@ static const uint32_t ipu_plane_formats[] = { DRM_FORMAT_RGBX8888, DRM_FORMAT_BGRA8888, DRM_FORMAT_BGRA8888, + DRM_FORMAT_UYVY, + DRM_FORMAT_VYUY, DRM_FORMAT_YUYV, DRM_FORMAT_YVYU, DRM_FORMAT_YUV420, -- cgit v1.2.3 From 4ed094fd73a7c0b8534685d2ed0f0f3ccdb96bdf Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 9 May 2016 17:02:13 +0200 Subject: drm/imx: use bus_flags for pixel clock polarity This patch allows panels to set pixel clock and data enable pin polarity other than the default of driving data at the falling pixel clock edge and active high display enable. Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-drm-core.c | 13 ++++++++----- drivers/gpu/drm/imx/imx-drm.h | 7 ++++--- drivers/gpu/drm/imx/imx-tve.c | 6 ++++-- drivers/gpu/drm/imx/ipuv3-crtc.c | 10 +++++++--- drivers/gpu/drm/imx/parallel-display.c | 4 ++-- 5 files changed, 25 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c index 1f14b602882b..82656654fb21 100644 --- a/drivers/gpu/drm/imx/imx-drm-core.c +++ b/drivers/gpu/drm/imx/imx-drm-core.c @@ -97,8 +97,8 @@ static struct imx_drm_crtc *imx_drm_find_crtc(struct drm_crtc *crtc) return NULL; } -int imx_drm_set_bus_format_pins(struct drm_encoder *encoder, u32 bus_format, - int hsync_pin, int vsync_pin) +int imx_drm_set_bus_config(struct drm_encoder *encoder, u32 bus_format, + int hsync_pin, int vsync_pin, u32 bus_flags) { struct imx_drm_crtc_helper_funcs *helper; struct imx_drm_crtc *imx_crtc; @@ -110,14 +110,17 @@ int imx_drm_set_bus_format_pins(struct drm_encoder *encoder, u32 bus_format, helper = &imx_crtc->imx_drm_helper_funcs; if (helper->set_interface_pix_fmt) return helper->set_interface_pix_fmt(encoder->crtc, - bus_format, hsync_pin, vsync_pin); + bus_format, hsync_pin, vsync_pin, + bus_flags); return 0; } -EXPORT_SYMBOL_GPL(imx_drm_set_bus_format_pins); +EXPORT_SYMBOL_GPL(imx_drm_set_bus_config); int imx_drm_set_bus_format(struct drm_encoder *encoder, u32 bus_format) { - return imx_drm_set_bus_format_pins(encoder, bus_format, 2, 3); + return imx_drm_set_bus_config(encoder, bus_format, 2, 3, + DRM_BUS_FLAG_DE_HIGH | + DRM_BUS_FLAG_PIXDATA_NEGEDGE); } EXPORT_SYMBOL_GPL(imx_drm_set_bus_format); diff --git a/drivers/gpu/drm/imx/imx-drm.h b/drivers/gpu/drm/imx/imx-drm.h index b0241b9d1334..74320a1723b7 100644 --- a/drivers/gpu/drm/imx/imx-drm.h +++ b/drivers/gpu/drm/imx/imx-drm.h @@ -19,7 +19,8 @@ struct imx_drm_crtc_helper_funcs { int (*enable_vblank)(struct drm_crtc *crtc); void (*disable_vblank)(struct drm_crtc *crtc); int (*set_interface_pix_fmt)(struct drm_crtc *crtc, - u32 bus_format, int hsync_pin, int vsync_pin); + u32 bus_format, int hsync_pin, int vsync_pin, + u32 bus_flags); const struct drm_crtc_helper_funcs *crtc_helper_funcs; const struct drm_crtc_funcs *crtc_funcs; }; @@ -41,8 +42,8 @@ void imx_drm_mode_config_init(struct drm_device *drm); struct drm_gem_cma_object *imx_drm_fb_get_obj(struct drm_framebuffer *fb); -int imx_drm_set_bus_format_pins(struct drm_encoder *encoder, - u32 bus_format, int hsync_pin, int vsync_pin); +int imx_drm_set_bus_config(struct drm_encoder *encoder, u32 bus_format, + int hsync_pin, int vsync_pin, u32 bus_flags); int imx_drm_set_bus_format(struct drm_encoder *encoder, u32 bus_format); diff --git a/drivers/gpu/drm/imx/imx-tve.c b/drivers/gpu/drm/imx/imx-tve.c index ae7a9fb3b8a2..baf788121287 100644 --- a/drivers/gpu/drm/imx/imx-tve.c +++ b/drivers/gpu/drm/imx/imx-tve.c @@ -294,8 +294,10 @@ static void imx_tve_encoder_prepare(struct drm_encoder *encoder) switch (tve->mode) { case TVE_MODE_VGA: - imx_drm_set_bus_format_pins(encoder, MEDIA_BUS_FMT_GBR888_1X24, - tve->hsync_pin, tve->vsync_pin); + imx_drm_set_bus_config(encoder, MEDIA_BUS_FMT_GBR888_1X24, + tve->hsync_pin, tve->vsync_pin, + DRM_BUS_FLAG_DE_HIGH | + DRM_BUS_FLAG_PIXDATA_NEGEDGE); break; case TVE_MODE_TVOUT: imx_drm_set_bus_format(encoder, MEDIA_BUS_FMT_YUV8_1X24); diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c index b2c30b8d9816..fc040417e1e8 100644 --- a/drivers/gpu/drm/imx/ipuv3-crtc.c +++ b/drivers/gpu/drm/imx/ipuv3-crtc.c @@ -66,6 +66,7 @@ struct ipu_crtc { struct ipu_flip_work *flip_work; int irq; u32 bus_format; + u32 bus_flags; int di_hsync_pin; int di_vsync_pin; }; @@ -271,8 +272,10 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc, else sig_cfg.clkflags = 0; - sig_cfg.enable_pol = 1; - sig_cfg.clk_pol = 0; + sig_cfg.enable_pol = !(ipu_crtc->bus_flags & DRM_BUS_FLAG_DE_LOW); + /* Default to driving pixel data on negative clock edges */ + sig_cfg.clk_pol = !!(ipu_crtc->bus_flags & + DRM_BUS_FLAG_PIXDATA_POSEDGE); sig_cfg.bus_format = ipu_crtc->bus_format; sig_cfg.v_to_h_sync = 0; sig_cfg.hsync_pin = ipu_crtc->di_hsync_pin; @@ -396,11 +399,12 @@ static void ipu_disable_vblank(struct drm_crtc *crtc) } static int ipu_set_interface_pix_fmt(struct drm_crtc *crtc, - u32 bus_format, int hsync_pin, int vsync_pin) + u32 bus_format, int hsync_pin, int vsync_pin, u32 bus_flags) { struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc); ipu_crtc->bus_format = bus_format; + ipu_crtc->bus_flags = bus_flags; ipu_crtc->di_hsync_pin = hsync_pin; ipu_crtc->di_vsync_pin = vsync_pin; diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c index 27755ecbf516..2c442516d4c7 100644 --- a/drivers/gpu/drm/imx/parallel-display.c +++ b/drivers/gpu/drm/imx/parallel-display.c @@ -115,8 +115,8 @@ static void imx_pd_encoder_dpms(struct drm_encoder *encoder, int mode) static void imx_pd_encoder_prepare(struct drm_encoder *encoder) { struct imx_parallel_display *imxpd = enc_to_imxpd(encoder); - - imx_drm_set_bus_format(encoder, imxpd->bus_format); + imx_drm_set_bus_config(encoder, imxpd->bus_format, 2, 3, + imxpd->connector.display_info.bus_flags); } static void imx_pd_encoder_commit(struct drm_encoder *encoder) -- cgit v1.2.3 From 97a6075d7cfabd0d45f8667a89da2a5fd13b4e70 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Tue, 24 May 2016 08:31:51 +0200 Subject: drm/imx: parallel-display: remove dead code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The 'mode_valid' flag is never set in this driver. Remove it and the code that depends on it. Signed-off-by: Lothar Waßmann Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/parallel-display.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c index 2c442516d4c7..2d1fd02cd3d6 100644 --- a/drivers/gpu/drm/imx/parallel-display.c +++ b/drivers/gpu/drm/imx/parallel-display.c @@ -35,7 +35,6 @@ struct imx_parallel_display { void *edid; int edid_len; u32 bus_format; - int mode_valid; struct drm_display_mode mode; struct drm_panel *panel; }; @@ -68,17 +67,6 @@ static int imx_pd_connector_get_modes(struct drm_connector *connector) num_modes = drm_add_edid_modes(connector, imxpd->edid); } - if (imxpd->mode_valid) { - struct drm_display_mode *mode = drm_mode_create(connector->dev); - - if (!mode) - return -EINVAL; - drm_mode_copy(mode, &imxpd->mode); - mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, - drm_mode_probed_add(connector, mode); - num_modes++; - } - if (np) { struct drm_display_mode *mode = drm_mode_create(connector->dev); -- cgit v1.2.3 From c82b4d73e2cd32fff41be0cd6e75ea83d32943b3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Tue, 24 May 2016 08:31:49 +0200 Subject: drm/imx: imx-ldb: honor 'native-mode' property when selecting video mode from DT MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch allows to select a specific video mode from a list of modes defined in DT by setting the 'native-mode' property appropriately. This change does not affect the behaviour of existing platforms, since they either: - have just one display-timings subnode - have the native-mode property pointing to the first entry - let the bootloader select the appropriate timing Signed-off-by: Lothar Waßmann Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-ldb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index 5f8f0bf45a62..beff793bb717 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -25,6 +25,7 @@ #include #include #include +#include