From 28fd2d397bab5c7fb0eed0c20b6766c99ae34a8f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:33 +0000 Subject: [ARM] S3C64XX: Set GPIO pin when select IRQ_EINT type Set the GPIO pin mode to external interrupt when configuring an IRQ_EINT's IRQ type. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/irq-eint.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index 1f7cc0067f5c..5d62f2799ea9 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -14,12 +14,15 @@ #include #include +#include #include #include #include #include +#include +#include #include #include @@ -74,6 +77,7 @@ static void s3c_irq_eint_maskack(unsigned int irq) static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) { int offs = eint_offset(irq); + int pin; int shift; u32 ctrl, mask; u32 newvalue = 0; @@ -125,6 +129,15 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) ctrl |= newvalue << shift; __raw_writel(ctrl, reg); + /* set the GPIO pin appropriately */ + + if (offs < 23) + pin = S3C64XX_GPN(offs); + else + pin = S3C64XX_GPM(offs - 23); + + s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2)); + return 0; } -- cgit v1.2.3 From 789b4ad36c7037758309df98f1efa65d0c26527d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 26 Jan 2009 19:12:01 +0000 Subject: [ARM] S3C64XX: Fix section mismatch for s3c64xx_register_clocks() Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c index 136c982c68e1..ad1b9682c9c3 100644 --- a/arch/arm/plat-s3c64xx/clock.c +++ b/arch/arm/plat-s3c64xx/clock.c @@ -248,7 +248,7 @@ static struct clk *clks[] __initdata = { &clk_48m, }; -void s3c64xx_register_clocks(void) +void __init s3c64xx_register_clocks(void) { struct clk *clkp; int ret; -- cgit v1.2.3 From 778974797793e7dcd42e3701e09c686b6419cb35 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 16:29:41 +0000 Subject: [ARM] SMDK6410: Correct I2C device name for WM8580 The WM8580 driver registers itself as "wm8580" rather than "WM8580". Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 3c4d47145c83..0436783c87d4 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -146,7 +146,7 @@ static struct platform_device *smdk6410_devices[] __initdata = { static struct i2c_board_info i2c_devs0[] __initdata = { { I2C_BOARD_INFO("24c08", 0x50), }, - { I2C_BOARD_INFO("WM8580", 0X1b), }, + { I2C_BOARD_INFO("wm8580", 0x1b), }, }; static struct i2c_board_info i2c_devs1[] __initdata = { -- cgit v1.2.3 From 027191a8c6602d3fb6dde3820517339e1daf191d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 16:29:43 +0000 Subject: [ARM] SMDK6410: Declare iodesc table static Shuts up a warning. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 0436783c87d4..25f7935576f8 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -129,7 +129,7 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = { .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, }; -struct map_desc smdk6410_iodesc[] = {}; +static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { #ifdef CONFIG_SMDK6410_SD_CH0 -- cgit v1.2.3 From 8bd8dbdf3725ce569467bd704840249869f626d6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 16:29:44 +0000 Subject: [ARM] S3C64XX: Staticise s3c64xx_init_irq_eint() It's an initcall and does not need to be exported. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/irq-eint.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index 5d62f2799ea9..8d1b7290aa13 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -194,7 +194,7 @@ static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc) s3c_irq_demux_eint(20, 27); } -int __init s3c64xx_init_irq_eint(void) +static int __init s3c64xx_init_irq_eint(void) { int irq; -- cgit v1.2.3 From 24d4076734b4ecf083a6be611040fe0743e59989 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 17:06:23 +0000 Subject: [ARM] S3C64XX: Do gpiolib configuration earlier arch_initcall() runs after the machine init function which means that any configuration of GPIO pins must currently be done later on, for example in callbacks from drivers. Move the initialisation earlier in order to allow machines to configure GPIOs directly in their init functions rather than having to have a callback invoked later on. Some other ARM platforms use this method. Other solutions for this include providing a special interface for setting up GPIOs en masse, adding callbacks to do the GPIO configuration from devices and doing the GPIO configuration implicitly. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/gpiolib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index cc62941d7b5c..ee9188add8fb 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -417,4 +417,4 @@ static __init int s3c64xx_gpiolib_init(void) return 0; } -arch_initcall(s3c64xx_gpiolib_init); +core_initcall(s3c64xx_gpiolib_init); -- cgit v1.2.3 From 4271c3bd46a0f0448118cf618c7210237a98e6bf Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:00:27 +0000 Subject: [ARM] S3C64XX: Rename IRQ_UHOST to IRQ_USBH The USB OHCI host device expects the IRQ definition to be named IRQ_USBH, so rename the S3C64XX IRQ header to match. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/include/plat/irqs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h index 2846f550b727..f865bf4d709e 100644 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h @@ -117,7 +117,7 @@ #define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12) #define IRQ_NFC S3C64XX_IRQ_VIC1(13) #define IRQ_CFCON S3C64XX_IRQ_VIC1(14) -#define IRQ_UHOST S3C64XX_IRQ_VIC1(15) +#define IRQ_USBH S3C64XX_IRQ_VIC1(15) #define IRQ_SPI0 S3C64XX_IRQ_VIC1(16) #define IRQ_SPI1 S3C64XX_IRQ_VIC1(17) #define IRQ_IIC S3C64XX_IRQ_VIC1(18) -- cgit v1.2.3 From 19c5957081a6ffbf014e6c944e6aafee3c1632c3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:00:33 +0000 Subject: [ARM] S3C64XX: Fix name of USB host clock. The usb-host-bus clock should be named usb-bus-host. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 8d9a0cada668..a2f526bcb389 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -351,7 +351,7 @@ static struct clksrc_clk clk_mmc2 = { static struct clksrc_clk clk_usbhost = { .clk = { - .name = "usb-host-bus", + .name = "usb-bus-host", .id = -1, .ctrlbit = S3C_CLKCON_SCLK_UHOST, .enable = s3c64xx_sclk_ctrl, -- cgit v1.2.3 From 41ba41d7c7e1d2a3c9cdfe16c1ee9f7af4693ae2 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:00:34 +0000 Subject: [ARM] S3C64XX: Fix USB host clock mux list The clock list for the USB host bus clock was in the wrong order, move clk_48m to position 0. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index a2f526bcb389..2984270b40a7 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -189,10 +189,10 @@ static struct clk_sources clkset_uart = { }; static struct clk *clkset_uhost_list[] = { + &clk_48m, &clk_mout_epll.clk, &clk_dout_mpll, &clk_fin_epll, - &clk_48m, }; static struct clk_sources clkset_uhost = { -- cgit v1.2.3 From 3782d3605522b836f53c6d11f76abf5404425c1b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 27 Feb 2009 11:25:37 +0000 Subject: [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/s3c6400-clock.c Fix the following sparse warnings in s3c6400-clock.c: 39:12: warning: symbol 'clk_ext_xtal_mux' was not declared. Should it be static? 66:12: warning: symbol 'clk_fout_apll' was not declared. Should it be static? 81:19: warning: symbol 'clk_mout_apll' was not declared. Should it be static? 91:12: warning: symbol 'clk_fout_epll' was not declared. Should it be static? 106:19: warning: symbol 'clk_mout_epll' was not declared. Should it be static? 126:19: warning: symbol 'clk_mout_mpll' was not declared. Should it be static? 148:12: warning: symbol 'clk_dout_mpll' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 2984270b40a7..6edbeef6aa9d 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -36,7 +36,7 @@ * ext_xtal_mux for want of an actual name from the manual. */ -struct clk clk_ext_xtal_mux = { +static struct clk clk_ext_xtal_mux = { .name = "ext_xtal", .id = -1, }; @@ -63,7 +63,7 @@ struct clksrc_clk { void __iomem *reg_divider; }; -struct clk clk_fout_apll = { +static struct clk clk_fout_apll = { .name = "fout_apll", .id = -1, }; @@ -78,7 +78,7 @@ static struct clk_sources clk_src_apll = { .nr_sources = ARRAY_SIZE(clk_src_apll_list), }; -struct clksrc_clk clk_mout_apll = { +static struct clksrc_clk clk_mout_apll = { .clk = { .name = "mout_apll", .id = -1, @@ -88,7 +88,7 @@ struct clksrc_clk clk_mout_apll = { .sources = &clk_src_apll, }; -struct clk clk_fout_epll = { +static struct clk clk_fout_epll = { .name = "fout_epll", .id = -1, }; @@ -103,7 +103,7 @@ static struct clk_sources clk_src_epll = { .nr_sources = ARRAY_SIZE(clk_src_epll_list), }; -struct clksrc_clk clk_mout_epll = { +static struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", .id = -1, @@ -123,7 +123,7 @@ static struct clk_sources clk_src_mpll = { .nr_sources = ARRAY_SIZE(clk_src_mpll_list), }; -struct clksrc_clk clk_mout_mpll = { +static struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", .id = -1, @@ -145,7 +145,7 @@ static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) return rate; } -struct clk clk_dout_mpll = { +static struct clk clk_dout_mpll = { .name = "dout_mpll", .id = -1, .parent = &clk_mout_mpll.clk, -- cgit v1.2.3 From fdca9bf2dae14218704ddd7dc60ad1b198c1d787 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 27 Feb 2009 11:29:23 +0000 Subject: [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/irq.c Fix the following sparse warnings in arch/arm/plat-s3c64xx/irq.c arch/arm/plat-s3c64xx/irq.c:210:23: warning: incorrect type in initializer (different address spaces) arch/arm/plat-s3c64xx/irq.c:210:23: expected void *reg_base arch/arm/plat-s3c64xx/irq.c:210:23: got void [noderef] *regs arch/arm/plat-s3c64xx/irq.c:215:2: warning: incorrect type in argument 1 (different address spaces) arch/arm/plat-s3c64xx/irq.c:215:2: expected void const volatile [noderef] * arch/arm/plat-s3c64xx/irq.c:215:2: got void * Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c index a94f1d5e819d..f22edf7c2d2d 100644 --- a/arch/arm/plat-s3c64xx/irq.c +++ b/arch/arm/plat-s3c64xx/irq.c @@ -207,7 +207,7 @@ static struct irq_chip s3c_irq_uart = { static void __init s3c64xx_uart_irq(struct uart_irq *uirq) { - void *reg_base = uirq->regs; + void __iomem *reg_base = uirq->regs; unsigned int irq; int offs; -- cgit v1.2.3 From efeff568677aa325f84d3ce37c219019887a79eb Mon Sep 17 00:00:00 2001 From: Werner Almesberger Date: Fri, 27 Feb 2009 08:03:07 -0300 Subject: [ARM] S3C64XX: Fix s3c64xx_setrate_clksrc Some of the rate selection logic in s3c64xx_setrate_clksrc uses what appears to be parent clock selection logic. This patch corrects it. I also added a check for overly large dividers to prevent them from changing unrelated clocks. Signed-off-by: Werner Almesberger Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 6edbeef6aa9d..05b17528041e 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -239,10 +239,12 @@ static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate) rate = clk_round_rate(clk, rate); div = clk_get_rate(clk->parent) / rate; + if (div > 16) + return -EINVAL; val = __raw_readl(reg); - val &= ~sclk->mask; - val |= (rate - 1) << sclk->shift; + val &= ~(0xf << sclk->shift); + val |= (div - 1) << sclk->shift; __raw_writel(val, reg); return 0; -- cgit v1.2.3 From 6b8036a877fe7a85d4474ddb89993339303959e1 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 28 Feb 2009 21:30:38 -0700 Subject: powerpc/4xx: Enable SERIAL_OF support by default for Virtex platforms Virtex FPGA designs have two serial port logic cores to choose from; the simple uartlite, and the full featured uart16550. Both cores are in common use so the defconfig should support both of them. Currently only console on uartlite is supported in the defconfig. This patch adds console support for the 16550 core. The Virtex reference designs do not work without this patch. Signed-off-by: Grant Likely --- arch/powerpc/configs/40x/virtex_defconfig | 2 +- arch/powerpc/configs/44x/virtex5_defconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig index b6888384dd74..f5698f962e58 100644 --- a/arch/powerpc/configs/40x/virtex_defconfig +++ b/arch/powerpc/configs/40x/virtex_defconfig @@ -686,7 +686,7 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig index 15aab1ca6384..1bf0a63614b1 100644 --- a/arch/powerpc/configs/44x/virtex5_defconfig +++ b/arch/powerpc/configs/44x/virtex5_defconfig @@ -691,7 +691,7 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -- cgit v1.2.3 From f45964ed6971db2e7ae6cb9b164def1d23b46612 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Mon, 2 Mar 2009 17:30:36 +0200 Subject: [ARM] orion5x: pass dram mbus data to xor driver This data should be passed to the xor driver in order to initialize the address decoding windows of the xor unit. without this patch, the self tests of the xor will fail unless the address decoding windows were initialized by the boot loader. Signed-off-by: Saeed Bishara Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion5x/common.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 0a623379789f..8a0e49d84256 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -431,6 +431,10 @@ void __init orion5x_uart1_init(void) /***************************************************************************** * XOR engine ****************************************************************************/ +struct mv_xor_platform_shared_data orion5x_xor_shared_data = { + .dram = &orion5x_mbus_dram_info, +}; + static struct resource orion5x_xor_shared_resources[] = { { .name = "xor low", @@ -448,6 +452,9 @@ static struct resource orion5x_xor_shared_resources[] = { static struct platform_device orion5x_xor_shared = { .name = MV_XOR_SHARED_NAME, .id = 0, + .dev = { + .platform_data = &orion5x_xor_shared_data, + }, .num_resources = ARRAY_SIZE(orion5x_xor_shared_resources), .resource = orion5x_xor_shared_resources, }; -- cgit v1.2.3 From c21986a76220919bb06e4c04a89a8a62aeac107e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 4 Mar 2009 00:18:11 -0800 Subject: jsflash: stop defining MAJOR_NR Ever since early 2.5 kernels block drivers don't need to define MAJOR_NR anymore, so use the JSFD_MAJOR defined directly and kill it. Signed-off-by: Christoph Hellwig Signed-off-by: David S. Miller --- drivers/sbus/char/jsflash.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c index a9a9893a5f95..e6d1fc8c54f1 100644 --- a/drivers/sbus/char/jsflash.c +++ b/drivers/sbus/char/jsflash.c @@ -38,9 +38,6 @@ #include #include #include - -#define MAJOR_NR JSFD_MAJOR - #include #include #include -- cgit v1.2.3 From f4c13638185c91a269c63fcfb980d89180cf43a1 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 4 Mar 2009 00:19:28 -0800 Subject: sparc64: wait_event_interruptible_timeout may return -ERESTARTSYS wait_event_interruptible_timeout may return -ERESTARTSYS. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/sbus/char/bbc_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c index f08e169ba1b5..7e30e5f6e032 100644 --- a/drivers/sbus/char/bbc_i2c.c +++ b/drivers/sbus/char/bbc_i2c.c @@ -129,7 +129,7 @@ static int wait_for_pin(struct bbc_i2c_bus *bp, u8 *status) bp->waiting = 1; add_wait_queue(&bp->wq, &wait); while (limit-- > 0) { - unsigned long val; + long val; val = wait_event_interruptible_timeout( bp->wq, -- cgit v1.2.3 From 87d99d6f7ee3ec73b2b0212427b173502ec9d6cb Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 4 Mar 2009 10:07:40 -0800 Subject: ARM: OMAP: Fix compile error if pm.h is included Change the error to a warning. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/pm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h index 2a9c27ad4c37..37e2f0f38b46 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/plat-omap/include/mach/pm.h @@ -108,7 +108,7 @@ !defined(CONFIG_ARCH_OMAP15XX) && \ !defined(CONFIG_ARCH_OMAP16XX) && \ !defined(CONFIG_ARCH_OMAP24XX) -#error "Power management for this processor not implemented yet" +#warning "Power management for this processor not implemented yet" #endif #ifndef __ASSEMBLER__ -- cgit v1.2.3 From 80ea3bac3a47bc73efa334d0dd57099d0ff14216 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 4 Mar 2009 10:07:41 -0800 Subject: ARM: OMAP: sched_clock() corrected After my OMAP3 board has been running for a while, I'm seeing weird latency traces like this: sh-1574 0d.h2 153us : do_timer (tick_do_update_jiffies64) sh-1574 0d.h2 153us : update_wall_time (do_timer) sh-1574 0d.h2 153us!: omap_32k_read (update_wall_time) sh-1574 0d.h2 1883us : update_xtime_cache (update_wall_time) sh-1574 0d.h2 1883us : clocksource_get_next (update_wall_time) sh-1574 0d.h2 1883us+: _spin_lock_irqsave (clocksource_get_next) and after a while: sh-17818 0d.h3 153us : do_timer (tick_do_update_jiffies64) sh-17818 0d.h3 153us : update_wall_time (do_timer) sh-17818 0d.h3 153us!: omap_32k_read (update_wall_time) sh-17818 0d.h3 1915us : update_xtime_cache (update_wall_time) sh-17818 0d.h3 1915us+: clocksource_get_next (update_wall_time) sh-17818 0d.h3 1945us : _spin_lock_irqsave (clocksource_get_next) Turns out that sched_clock() is using cyc2ns(), which returns NTP adjusted time. The sched_clock() frequency should not be adjusted. The patch deletes omap_32k_ticks_to_nsecs() and rewrites sched_clock() to do the conversion using the constant multiplier. Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/common.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 0843b8882f93..6825fbb5a056 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -199,21 +199,17 @@ static struct clocksource clocksource_32k = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -/* - * Rounds down to nearest nsec. - */ -unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k) -{ - return cyc2ns(&clocksource_32k, ticks_32k); -} - /* * Returns current time from boot in nsecs. It's OK for this to wrap * around for now, as it's just a relative time stamp. */ unsigned long long sched_clock(void) { - return omap_32k_ticks_to_nsecs(omap_32k_read()); + unsigned long long ret; + + ret = (unsigned long long)omap_32k_read(); + ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift; + return ret; } static int __init omap_init_clocksource_32k(void) -- cgit v1.2.3 From e951651657610305c9af0045fd64c6a5b0bc4b80 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 4 Mar 2009 10:07:41 -0800 Subject: ARM: OMAP: Allow I2C bus driver to be compiled as a module Fixes a linker error when OMAP I2C bus driver is compiled as a module: ERROR: "i2c_register_board_info" [arch/arm/plat-omap/i2c.ko] undefined! The I2C utility functions used for board initialization should be always built-in. Signed-off-by: Aaro Koskinen Acked-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/Makefile | 3 ++- arch/arm/plat-omap/include/mach/common.h | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index deaff58878a2..04a100cfb8e5 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -18,7 +18,8 @@ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o -obj-$(CONFIG_I2C_OMAP) += i2c.o +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index ef70e2b0f054..e746ec7e785e 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -35,7 +35,7 @@ extern void omap_map_common_io(void); extern struct sys_timer omap_timer; extern void omap_serial_init(void); extern void omap_serial_enable_clocks(int enable); -#ifdef CONFIG_I2C_OMAP +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len); -- cgit v1.2.3 From 8ca7fe267f58462825729443f3e3b44ef4901cf0 Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Wed, 4 Mar 2009 10:07:42 -0800 Subject: ARM: OMAP: board-omap3beagle: set i2c-3 to 100kHz Changing it do 100kHz is needed to make more devices works properly. Controlling the TI DLP Pico projector[1] doesn't work properly at 400kHz, 100kHz and lower work fine. EDID readout is unaffected by this change. [1] http://focus.ti.com/dlpdmd/docs/dlpdiscovery.tsp?sectionId=60&tabId=2234 Signed-off-by: Koen Kooi Acked-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3beagle.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 38c88fbe658d..e39cd2c46cfa 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -178,7 +178,9 @@ static int __init omap3_beagle_i2c_init(void) #ifdef CONFIG_I2C2_OMAP_BEAGLE omap_register_i2c_bus(2, 400, NULL, 0); #endif - omap_register_i2c_bus(3, 400, NULL, 0); + /* Bus 3 is attached to the DVI port where devices like the pico DLP + * projector don't work reliably with 400kHz */ + omap_register_i2c_bus(3, 100, NULL, 0); return 0; } -- cgit v1.2.3 From d0cac39e4ec8097e4c7099d291b1fdcc0fe56b58 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 4 Mar 2009 14:43:47 -0800 Subject: sparc64: Fix lost interrupts on sun4u. Based upon a report by Meelis Roos. Sparc64 SBUS and PCI controllers use a combination of IMAP and ICLR registers to manage device interrupts. The IMAP register contains the "valid" enable bit as well as CPU targetting information. Whereas the ICLR register is written with zero at the end of handling an interrupt to reset the state machine for that interrupt to IDLE so it can be sent again. For PCI slot and SBUS slot devices we can have multiple interrupts sharing the same IMAP register. There are individual ICLR registers but only one IMAP register for managing those. We represent each shared case with individual virtual IRQs so the generic IRQ layer thinks there is only one user of the IRQ instance. In such shared IMAP cases this is wrong, so if there are multiple active users then a free_irq() call will prematurely turn off the interrupt by clearing the Valid bit in the IMAP register even though there are other active users. Fix this by simply doing nothing in sun4u_disable_irq() and checking IRQF_DISABLED during IRQ dispatch. This situation doesn't exist in the hypervisor sun4v cases, so I left those alone. Tested-by: Meelis Roos Signed-off-by: David S. Miller --- arch/sparc/kernel/irq_64.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index e289376198eb..1c378d8e90c5 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -323,17 +323,25 @@ static void sun4u_set_affinity(unsigned int virt_irq, sun4u_irq_enable(virt_irq); } +/* Don't do anything. The desc->status check for IRQ_DISABLED in + * handler_irq() will skip the handler call and that will leave the + * interrupt in the sent state. The next ->enable() call will hit the + * ICLR register to reset the state machine. + * + * This scheme is necessary, instead of clearing the Valid bit in the + * IMAP register, to handle the case of IMAP registers being shared by + * multiple INOs (and thus ICLR registers). Since we use a different + * virtual IRQ for each shared IMAP instance, the generic code thinks + * there is only one user so it prematurely calls ->disable() on + * free_irq(). + * + * We have to provide an explicit ->disable() method instead of using + * NULL to get the default. The reason is that if the generic code + * sees that, it also hooks up a default ->shutdown method which + * invokes ->mask() which we do not want. See irq_chip_set_defaults(). + */ static void sun4u_irq_disable(unsigned int virt_irq) { - struct irq_handler_data *data = get_irq_chip_data(virt_irq); - - if (likely(data)) { - unsigned long imap = data->imap; - unsigned long tmp = upa_readq(imap); - - tmp &= ~IMAP_VALID; - upa_writeq(tmp, imap); - } } static void sun4u_irq_eoi(unsigned int virt_irq) @@ -746,7 +754,8 @@ void handler_irq(int irq, struct pt_regs *regs) desc = irq_desc + virt_irq; - desc->handle_irq(virt_irq, desc); + if (!(desc->status & IRQ_DISABLED)) + desc->handle_irq(virt_irq, desc); bucket_pa = next_pa; } -- cgit v1.2.3 From d4cc510c61b050ef38e842a12feef71c56d7cf81 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 4 Mar 2009 11:48:46 +0100 Subject: [ARM] 5418/1: restore lr before leaving mcount MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc seems to expect that lr isn't clobbered by mcount, because for a function starting with: static int func(void) { void *ra = __builtin_return_address(0); printk(KERN_EMERG "__builtin_return_address(0) = %pS\n", ra) ... the following assembler is generated by gcc 4.3.2: 0: e1a0c00d mov ip, sp 4: e92dd810 push {r4, fp, ip, lr, pc} 8: e24cb004 sub fp, ip, #4 ; 0x4 c: ebfffffe bl 0 10: e59f0034 ldr r0, [pc, #52] 14: e1a0100e mov r1, lr 18: ebfffffe bl 0 Without this patch obviously __builtin_return_address(0) yields func+0x10 instead of the return address of the caller. Note this patch fixes a similar issue for the routines used with dynamic ftrace even though this isn't currently selectable for ARM. Cc: Abhishek Sagar Cc: Steven Rostedt Cc: Ingo Molnar Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/kernel/entry-common.S | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 49a6ba926c2b..159d0416f270 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -111,6 +111,7 @@ ENTRY(mcount) .globl mcount_call mcount_call: bl ftrace_stub + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} ENTRY(ftrace_caller) @@ -122,6 +123,7 @@ ENTRY(ftrace_caller) .globl ftrace_call ftrace_call: bl ftrace_stub + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} #else @@ -133,6 +135,7 @@ ENTRY(mcount) adr r0, ftrace_stub cmp r0, r2 bne trace + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} trace: @@ -141,6 +144,7 @@ trace: sub r0, r0, #MCOUNT_INSN_SIZE mov lr, pc mov pc, r2 + mov lr, r1 @ restore lr ldmia sp!, {r0-r3, pc} #endif /* CONFIG_DYNAMIC_FTRACE */ -- cgit v1.2.3 From 33dd6f92a1a7ad85c54d47fd9d73371a32c0bde4 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 20 Feb 2009 06:53:48 -0700 Subject: [SCSI] sd: Don't try to spin up drives that are connected to an inactive port We currently try to spin up drives connected to standby and unavailable ports. This will never succeed and wastes a lot of time. Fail quickly if the sense data reports the port is in standby or unavailable state. Reported-by: Narayanan Rengarajan Tested-by: Narayanan Rengarajan Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 55310dbc10a6..4970ae4a62d6 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1167,23 +1167,19 @@ sd_spinup_disk(struct scsi_disk *sdkp) /* * The device does not want the automatic start to be issued. */ - if (sdkp->device->no_start_on_add) { + if (sdkp->device->no_start_on_add) break; - } - - /* - * If manual intervention is required, or this is an - * absent USB storage device, a spinup is meaningless. - */ - if (sense_valid && - sshdr.sense_key == NOT_READY && - sshdr.asc == 4 && sshdr.ascq == 3) { - break; /* manual intervention required */ - /* - * Issue command to spin up drive when not ready - */ - } else if (sense_valid && sshdr.sense_key == NOT_READY) { + if (sense_valid && sshdr.sense_key == NOT_READY) { + if (sshdr.asc == 4 && sshdr.ascq == 3) + break; /* manual intervention required */ + if (sshdr.asc == 4 && sshdr.ascq == 0xb) + break; /* standby */ + if (sshdr.asc == 4 && sshdr.ascq == 0xc) + break; /* unavailable */ + /* + * Issue command to spin up drive when not ready + */ if (!spintime) { sd_printk(KERN_NOTICE, sdkp, "Spinning up disk..."); cmd[0] = START_STOP; -- cgit v1.2.3 From ef449e6d21b6e560c7ec36ed285ec3a34e0b12ed Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Thu, 5 Mar 2009 17:33:50 +0100 Subject: [ARM] 5419/1: ep93xx: fix build warnings about struct i2c_board_info Fix build warnings due to struct i2c_board_info in Patch "5311/1: add core support for built in i2c bus" is causing 11 of 39 the build warnings with Kautobuild for ep93xx_defconfig on kernel 2.6.29-rc5-git4. This patch fixes it. Signed-off-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/mach-ep93xx/include/mach/platform.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 88f7e88f152f..05f0f4f2f3ce 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -4,6 +4,8 @@ #ifndef __ASSEMBLY__ +struct i2c_board_info; + struct ep93xx_eth_data { unsigned char dev_addr[6]; -- cgit v1.2.3 From d2c452306ab402d7a3572bc3bf8e575796529bf8 Mon Sep 17 00:00:00 2001 From: Gregory Lardiere Date: Sun, 22 Feb 2009 17:54:11 -0300 Subject: V4L/DVB (10789): m5602-s5k4aa: Split up the initial sensor probe in chunks. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The previous probe rotine tried to read 6 bytes in one chunk which currently isn't allowed. This is the rev. 10346 243399e67c41 readded with a high priority. Signed-off-by: Gregory Lardiere Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index e564a61a72d7..48892b5715d5 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -102,7 +102,11 @@ int s5k4aa_probe(struct sd *sd) } /* Test some registers, but we don't know their exact meaning yet */ - if (m5602_read_sensor(sd, 0x00, prod_id, sizeof(prod_id))) + if (m5602_read_sensor(sd, 0x00, prod_id, 2)) + return -ENODEV; + if (m5602_read_sensor(sd, 0x02, prod_id+2, 2)) + return -ENODEV; + if (m5602_read_sensor(sd, 0x04, prod_id+4, 2)) return -ENODEV; if (memcmp(prod_id, expected_prod_id, sizeof(prod_id))) -- cgit v1.2.3 From 4c6c390eb8ba0c569279266a98c604508c695ef8 Mon Sep 17 00:00:00 2001 From: Vitaly Wool Date: Thu, 5 Mar 2009 13:03:32 -0300 Subject: V4L/DVB (10832): tvaudio: Avoid breakage with tda9874a The 'bytes' array is 64 bytes large but the easy standard programming (TDA9874A_ESP) has a number of 255, outside the shadow array size. This patch increases the size of the shadow array in order to accomodate this register. Signed-off-by: Vitaly Wool Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 5aeccb301cea..076ed5bf48b1 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -54,7 +54,7 @@ MODULE_LICENSE("GPL"); /* ---------------------------------------------------------------------- */ /* our structs */ -#define MAXREGS 64 +#define MAXREGS 256 struct CHIPSTATE; typedef int (*getvalue)(int); -- cgit v1.2.3 From e08e7b5f01de7ec246b996c65e9c26c7cea0c62d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 5 Mar 2009 16:19:14 -0300 Subject: V4L/DVB (10834): zoran: auto-select bt866 for AverMedia 6 Eyes AFAIK, the bt866 is only seen on AverMedia 6 Eyes. However, no module selects it. Adds a proper select for this driver. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/zoran/Kconfig b/drivers/media/video/zoran/Kconfig index 4ea5fa71de89..8666e19f31a7 100644 --- a/drivers/media/video/zoran/Kconfig +++ b/drivers/media/video/zoran/Kconfig @@ -68,6 +68,7 @@ config VIDEO_ZORAN_AVS6EYES tristate "AverMedia 6 Eyes support (EXPERIMENTAL)" depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1 select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_BT866 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO help Support for the AverMedia 6 Eyes video surveillance card. -- cgit v1.2.3 From 20214fcd74bddc16d65d466212f5dd32aafe8868 Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Mon, 12 Jan 2009 16:22:57 +0200 Subject: MX1 fix include Includes missed irqs.h in devices.c and mx1ads.c. Signed-off-by: Darius Augulis Signed-off-by: Sascha Hauer --- arch/arm/mach-mx1/devices.c | 2 ++ arch/arm/mach-mx1/mx1ads.c | 1 + 2 files changed, 3 insertions(+) diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c index 686d8d2dbb24..a95644193f3f 100644 --- a/arch/arm/mach-mx1/devices.c +++ b/arch/arm/mach-mx1/devices.c @@ -23,6 +23,8 @@ #include #include #include + +#include #include static struct resource imx_csi_resources[] = { diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index 2e4b185fe4a9..3200cf60e384 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From 1f6ff364ceda516f88351a8ab640e656beed0b26 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Fri, 27 Feb 2009 10:54:35 -0800 Subject: [SCSI] libfc: Pass lport in exch_mgr_reset fc_exch_mgr structure is private to fc_exch.c. To export exch_mgr_reset to transport, transport needs access to the exch manager. Change exch_mgr_reset to use lport param which is the shared structure between libFC and transport. Alternatively, fc_exch_mgr definition can be moved to libfc.h so that lport can be accessed from mp*. Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 3 ++- drivers/scsi/libfc/fc_lport.c | 4 ++-- drivers/scsi/libfc/fc_rport.c | 4 ++-- include/scsi/libfc.h | 4 ++-- 4 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 66db08a5f27f..a09416fd843c 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1480,10 +1480,11 @@ static void fc_exch_reset(struct fc_exch *ep) * If sid is non-zero, reset only exchanges we source from that FID. * If did is non-zero, reset only exchanges destined to that FID. */ -void fc_exch_mgr_reset(struct fc_exch_mgr *mp, u32 sid, u32 did) +void fc_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did) { struct fc_exch *ep; struct fc_exch *next; + struct fc_exch_mgr *mp = lp->emp; spin_lock_bh(&mp->em_lock); restart: diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 0b9bdb1fb807..5db223ce3b25 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -663,7 +663,7 @@ int fc_lport_destroy(struct fc_lport *lport) { lport->tt.frame_send = fc_frame_drop; lport->tt.fcp_abort_io(lport); - lport->tt.exch_mgr_reset(lport->emp, 0, 0); + lport->tt.exch_mgr_reset(lport, 0, 0); return 0; } EXPORT_SYMBOL(fc_lport_destroy); @@ -973,7 +973,7 @@ static void fc_lport_enter_reset(struct fc_lport *lport) lport->tt.disc_stop(lport); - lport->tt.exch_mgr_reset(lport->emp, 0, 0); + lport->tt.exch_mgr_reset(lport, 0, 0); fc_host_fabric_name(lport->host) = 0; fc_host_port_id(lport->host) = 0; diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index e780d8caf70e..dec7bae0e56d 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -1285,7 +1285,7 @@ void fc_rport_terminate_io(struct fc_rport *rport) struct fc_rport_libfc_priv *rdata = rport->dd_data; struct fc_lport *lport = rdata->local_port; - lport->tt.exch_mgr_reset(lport->emp, 0, rport->port_id); - lport->tt.exch_mgr_reset(lport->emp, rport->port_id, 0); + lport->tt.exch_mgr_reset(lport, 0, rport->port_id); + lport->tt.exch_mgr_reset(lport, rport->port_id, 0); } EXPORT_SYMBOL(fc_rport_terminate_io); diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 9f2876397dda..042f4ade73d7 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -472,7 +472,7 @@ struct libfc_function_template { * If s_id is non-zero, reset only exchanges originating from that FID. * If d_id is non-zero, reset only exchanges sending to that FID. */ - void (*exch_mgr_reset)(struct fc_exch_mgr *, + void (*exch_mgr_reset)(struct fc_lport *, u32 s_id, u32 d_id); void (*rport_flush_queue)(void); @@ -916,7 +916,7 @@ struct fc_seq *fc_seq_start_next(struct fc_seq *sp); * If s_id is non-zero, reset only exchanges originating from that FID. * If d_id is non-zero, reset only exchanges sending to that FID. */ -void fc_exch_mgr_reset(struct fc_exch_mgr *, u32 s_id, u32 d_id); +void fc_exch_mgr_reset(struct fc_lport *, u32 s_id, u32 d_id); /* * Functions for fc_functions_template -- cgit v1.2.3 From 571f824c3cd7b7f5a40ba100f7e576b6b0fe826a Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Fri, 27 Feb 2009 10:54:41 -0800 Subject: [SCSI] libfc: when rport goes away (re-plogi), clean up exchanges to/from rport When a rport goes away, libFC does a plogi which will reset exchanges at the rport. Clean exchanges at our end, both in transport and libFC. If transport hooks into exch_mgr_reset, it will call back into fc_exch_mgr_reset() to clean up libFC exchanges. Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_rport.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index dec7bae0e56d..717575934152 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -214,6 +214,7 @@ static void fc_rport_state_enter(struct fc_rport *rport, static void fc_rport_work(struct work_struct *work) { + u32 port_id; struct fc_rport_libfc_priv *rdata = container_of(work, struct fc_rport_libfc_priv, event_work); enum fc_rport_event event; @@ -279,8 +280,12 @@ static void fc_rport_work(struct work_struct *work) rport_ops->event_callback(lport, rport, event); if (trans_state == FC_PORTSTATE_ROGUE) put_device(&rport->dev); - else + else { + port_id = rport->port_id; fc_remote_port_delete(rport); + lport->tt.exch_mgr_reset(lport, 0, port_id); + lport->tt.exch_mgr_reset(lport, port_id, 0); + } } else mutex_unlock(&rdata->rp_mutex); } -- cgit v1.2.3 From 78342da3682ec843e3e6301af5c723c88a46c408 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:54:46 -0800 Subject: [SCSI] libfc: handle RRQ exch timeout Cleanup exchange held due to RRQ when RRQ exch times out, in this case the ABTS is already done causing RRQ req therefore proceeding with cleanup in fc_exch_rrq_resp should be okay to restore exch resource. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index a09416fd843c..e874e77b740c 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1608,7 +1608,7 @@ static void fc_exch_rrq_resp(struct fc_seq *sp, struct fc_frame *fp, void *arg) if (IS_ERR(fp)) { int err = PTR_ERR(fp); - if (err == -FC_EX_CLOSED) + if (err == -FC_EX_CLOSED || err == -FC_EX_TIMEOUT) goto cleanup; FC_DBG("Cannot process RRQ, because of frame error %d\n", err); return; -- cgit v1.2.3 From a7e84f2b83f17f8f11da34ccef3ba5a862dc0182 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:54:51 -0800 Subject: [SCSI] libfc: fixed a soft lockup issue in fc_exch_recv_abts The fc_seq_start_next grabs ep->ex_lock but this lock was already held here, so instead called fc_seq_start_next_locked to avoid soft lockup. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index e874e77b740c..dd269e5f953e 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1096,7 +1096,7 @@ static void fc_exch_recv_abts(struct fc_exch *ep, struct fc_frame *rx_fp) ap->ba_high_seq_cnt = fh->fh_seq_cnt; ap->ba_low_seq_cnt = htons(sp->cnt); } - sp = fc_seq_start_next(sp); + sp = fc_seq_start_next_locked(sp); spin_unlock_bh(&ep->ex_lock); fc_seq_send_last(sp, fp, FC_RCTL_BA_ACC, FC_TYPE_BLS); fc_frame_free(rx_fp); -- cgit v1.2.3 From bc0e17f691085315ae9303eb5b0883fe16dfe6b1 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:54:57 -0800 Subject: [SCSI] libfc, fcoe: fixed locking issues with lport->lp_mutex around lport->link_status The fcoe_xmit could call fc_pause in case the pending skb queue len is larger than FCOE_MAX_QUEUE_DEPTH, the fc_pause was trying to grab lport->lp_muex to change lport->link_status and that had these issues :- 1. The fcoe_xmit was getting called with bh disabled, thus causing "BUG: scheduling while atomic" when grabbing lport->lp_muex with bh disabled. 2. fc_linkup and fc_linkdown function calls lport_enter function with lport->lp_mutex held and these enter function in turn calls fcoe_xmit to send lport related FC frame, e.g. fc_linkup => fc_lport_enter_flogi to send flogi req. In this case grabbing the same lport->lp_mutex again in fc_puase from fcoe_xmit would cause deadlock. The lport->lp_mutex was used for setting FC_PAUSE in fcoe_xmit path but FC_PAUSE bit was not used anywhere beside just setting and clear this bit in lport->link_status, instead used a separate field qfull in fc_lport to eliminate need for lport->lp_mutex to track pending queue full condition and in turn avoid above described two locking issues. Also added check for lp->qfull in fc_fcp_lport_queue_ready to trigger SCSI_MLQUEUE_HOST_BUSY when lp->qfull is set to prevent more scsi-ml cmds while lp->qfull is set. This patch eliminated FC_LINK_UP and FC_PAUSE and instead used dedicated fields in fc_lport for this, this simplified all related conditional code. Also removed fc_pause and fc_unpause functions and instead used newly added lport->qfull directly in fcoe. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe_sw.c | 6 +++--- drivers/scsi/fcoe/libfcoe.c | 41 +++++++++++++++++------------------------ drivers/scsi/libfc/fc_fcp.c | 4 ++-- drivers/scsi/libfc/fc_lport.c | 36 ++++++------------------------------ include/scsi/libfc.h | 12 ++---------- 5 files changed, 30 insertions(+), 69 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index dc4cd5e25760..cf83675a0fb9 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -116,7 +116,8 @@ static int fcoe_sw_lport_config(struct fc_lport *lp) { int i = 0; - lp->link_status = 0; + lp->link_up = 0; + lp->qfull = 0; lp->max_retry_count = 3; lp->e_d_tov = 2 * 1000; /* FC-FS default */ lp->r_a_tov = 2 * 2 * 1000; @@ -181,9 +182,8 @@ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev) if (fc_set_mfs(lp, mfs)) return -EINVAL; - lp->link_status = ~FC_PAUSE & ~FC_LINK_UP; if (!fcoe_link_ok(lp)) - lp->link_status |= FC_LINK_UP; + lp->link_up = 1; /* offload features support */ if (fc->real_dev->features & NETIF_F_SG) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index e419f486cdb3..296071043f55 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -504,7 +504,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) if (rc) { fcoe_insert_wait_queue(lp, skb); if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) - fc_pause(lp); + lp->qfull = 1; } return 0; @@ -718,7 +718,7 @@ static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa) * fcoe_watchdog - fcoe timer callback * @vp: * - * This checks the pending queue length for fcoe and put fcoe to be paused state + * This checks the pending queue length for fcoe and set lport qfull * if the FCOE_MAX_QUEUE_DEPTH is reached. This is done for all fc_lport on the * fcoe_hostlist. * @@ -728,17 +728,17 @@ void fcoe_watchdog(ulong vp) { struct fc_lport *lp; struct fcoe_softc *fc; - int paused = 0; + int qfilled = 0; read_lock(&fcoe_hostlist_lock); list_for_each_entry(fc, &fcoe_hostlist, list) { lp = fc->lp; if (lp) { if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) - paused = 1; + qfilled = 1; if (fcoe_check_wait_queue(lp) < FCOE_MAX_QUEUE_DEPTH) { - if (paused) - fc_unpause(lp); + if (qfilled) + lp->qfull = 0; } } } @@ -767,8 +767,7 @@ void fcoe_watchdog(ulong vp) **/ static int fcoe_check_wait_queue(struct fc_lport *lp) { - int rc, unpause = 0; - int paused = 0; + int rc; struct sk_buff *skb; struct fcoe_softc *fc; @@ -776,10 +775,10 @@ static int fcoe_check_wait_queue(struct fc_lport *lp) spin_lock_bh(&fc->fcoe_pending_queue.lock); /* - * is this interface paused? + * if interface pending queue full then set qfull in lport. */ if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) - paused = 1; + lp->qfull = 1; if (fc->fcoe_pending_queue.qlen) { while ((skb = __skb_dequeue(&fc->fcoe_pending_queue)) != NULL) { spin_unlock_bh(&fc->fcoe_pending_queue.lock); @@ -791,11 +790,9 @@ static int fcoe_check_wait_queue(struct fc_lport *lp) spin_lock_bh(&fc->fcoe_pending_queue.lock); } if (fc->fcoe_pending_queue.qlen < FCOE_MAX_QUEUE_DEPTH) - unpause = 1; + lp->qfull = 0; } spin_unlock_bh(&fc->fcoe_pending_queue.lock); - if ((unpause) && (paused)) - fc_unpause(lp); return fc->fcoe_pending_queue.qlen; } @@ -873,7 +870,7 @@ static int fcoe_device_notification(struct notifier_block *notifier, struct net_device *real_dev = ptr; struct fcoe_softc *fc; struct fcoe_dev_stats *stats; - u16 new_status; + u32 new_link_up; u32 mfs; int rc = NOTIFY_OK; @@ -890,17 +887,15 @@ static int fcoe_device_notification(struct notifier_block *notifier, goto out; } - new_status = lp->link_status; + new_link_up = lp->link_up; switch (event) { case NETDEV_DOWN: case NETDEV_GOING_DOWN: - new_status &= ~FC_LINK_UP; + new_link_up = 0; break; case NETDEV_UP: case NETDEV_CHANGE: - new_status &= ~FC_LINK_UP; - if (!fcoe_link_ok(lp)) - new_status |= FC_LINK_UP; + new_link_up = !fcoe_link_ok(lp); break; case NETDEV_CHANGEMTU: mfs = fc->real_dev->mtu - @@ -908,17 +903,15 @@ static int fcoe_device_notification(struct notifier_block *notifier, sizeof(struct fcoe_crc_eof)); if (mfs >= FC_MIN_MAX_FRAME) fc_set_mfs(lp, mfs); - new_status &= ~FC_LINK_UP; - if (!fcoe_link_ok(lp)) - new_status |= FC_LINK_UP; + new_link_up = !fcoe_link_ok(lp); break; case NETDEV_REGISTER: break; default: FC_DBG("unknown event %ld call", event); } - if (lp->link_status != new_status) { - if ((new_status & FC_LINK_UP) == FC_LINK_UP) + if (lp->link_up != new_link_up) { + if (new_link_up) fc_linkup(lp); else { stats = lp->dev_stats[smp_processor_id()]; diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 404e63ff46b8..f440aaca39c2 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -1621,7 +1621,7 @@ out: static inline int fc_fcp_lport_queue_ready(struct fc_lport *lp) { /* lock ? */ - return (lp->state == LPORT_ST_READY) && (lp->link_status & FC_LINK_UP); + return (lp->state == LPORT_ST_READY) && lp->link_up && !lp->qfull; } /** @@ -1890,7 +1890,7 @@ int fc_eh_abort(struct scsi_cmnd *sc_cmd) lp = shost_priv(sc_cmd->device->host); if (lp->state != LPORT_ST_READY) return rc; - else if (!(lp->link_status & FC_LINK_UP)) + else if (!lp->link_up) return rc; spin_lock_irqsave(lp->host->host_lock, flags); diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 5db223ce3b25..a6ab692f5f51 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -250,7 +250,7 @@ void fc_get_host_port_state(struct Scsi_Host *shost) { struct fc_lport *lp = shost_priv(shost); - if ((lp->link_status & FC_LINK_UP) == FC_LINK_UP) + if (lp->link_up) fc_host_port_state(shost) = FC_PORTSTATE_ONLINE; else fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE; @@ -577,8 +577,8 @@ void fc_linkup(struct fc_lport *lport) fc_host_port_id(lport->host)); mutex_lock(&lport->lp_mutex); - if ((lport->link_status & FC_LINK_UP) != FC_LINK_UP) { - lport->link_status |= FC_LINK_UP; + if (!lport->link_up) { + lport->link_up = 1; if (lport->state == LPORT_ST_RESET) fc_lport_enter_flogi(lport); @@ -597,8 +597,8 @@ void fc_linkdown(struct fc_lport *lport) FC_DEBUG_LPORT("Link is down for port (%6x)\n", fc_host_port_id(lport->host)); - if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP) { - lport->link_status &= ~(FC_LINK_UP); + if (lport->link_up) { + lport->link_up = 0; fc_lport_enter_reset(lport); lport->tt.fcp_cleanup(lport); } @@ -606,30 +606,6 @@ void fc_linkdown(struct fc_lport *lport) } EXPORT_SYMBOL(fc_linkdown); -/** - * fc_pause - Pause the flow of frames - * @lport: The lport to be paused - */ -void fc_pause(struct fc_lport *lport) -{ - mutex_lock(&lport->lp_mutex); - lport->link_status |= FC_PAUSE; - mutex_unlock(&lport->lp_mutex); -} -EXPORT_SYMBOL(fc_pause); - -/** - * fc_unpause - Unpause the flow of frames - * @lport: The lport to be unpaused - */ -void fc_unpause(struct fc_lport *lport) -{ - mutex_lock(&lport->lp_mutex); - lport->link_status &= ~(FC_PAUSE); - mutex_unlock(&lport->lp_mutex); -} -EXPORT_SYMBOL(fc_unpause); - /** * fc_fabric_logoff - Logout of the fabric * @lport: fc_lport pointer to logoff the fabric @@ -977,7 +953,7 @@ static void fc_lport_enter_reset(struct fc_lport *lport) fc_host_fabric_name(lport->host) = 0; fc_host_port_id(lport->host) = 0; - if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP) + if (lport->link_up) fc_lport_enter_flogi(lport); } diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 042f4ade73d7..b9e6c1cd8914 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -68,9 +68,6 @@ /* * FC HBA status */ -#define FC_PAUSE (1 << 1) -#define FC_LINK_UP (1 << 0) - enum fc_lport_state { LPORT_ST_NONE = 0, LPORT_ST_FLOGI, @@ -603,7 +600,8 @@ struct fc_lport { /* Operational Information */ struct libfc_function_template tt; - u16 link_status; + u8 link_up; + u8 qfull; enum fc_lport_state state; unsigned long boot_time; @@ -703,12 +701,6 @@ void fc_linkup(struct fc_lport *); */ void fc_linkdown(struct fc_lport *); -/* - * Pause and unpause traffic. - */ -void fc_pause(struct fc_lport *); -void fc_unpause(struct fc_lport *); - /* * Configure the local port. */ -- cgit v1.2.3 From 6755db1cd4587084be85f860b7aa7c0cc9d776dc Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 27 Feb 2009 10:55:02 -0800 Subject: [SCSI] libfc: rport retry on LS_RJT from certain ELS This allows any rport ELS to retry on LS_RJT. The rport error handling would only retry on resource allocation failures and exchange timeouts. I have a target that will occasionally reject PLOGI when we do a quick LOGO/PLOGI. When a critical ELS was rejected, libfc would fail silently leaving the rport in a dead state. The retry count and delay are managed by fc_rport_error_retry. If the retry count is exceeded fc_rport_error will be called. When retrying is not the correct course of action, fc_rport_error can be called directly. Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 2 - drivers/scsi/libfc/fc_rport.c | 111 ++++++++++++++++++++++++------------------ include/scsi/fc/fc_fs.h | 5 ++ 3 files changed, 69 insertions(+), 49 deletions(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index dd269e5f953e..8c4018956d4c 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -32,8 +32,6 @@ #include #include -#define FC_DEF_R_A_TOV (10 * 1000) /* resource allocation timeout */ - /* * fc_exch_debug can be set in debugger or at compile time to get more logs. */ diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 717575934152..600a8fffa940 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -81,6 +81,7 @@ static void fc_rport_recv_logo_req(struct fc_rport *, struct fc_seq *, struct fc_frame *); static void fc_rport_timeout(struct work_struct *); static void fc_rport_error(struct fc_rport *, struct fc_frame *); +static void fc_rport_error_retry(struct fc_rport *, struct fc_frame *); static void fc_rport_work(struct work_struct *); static const char *fc_rport_state_names[] = { @@ -410,57 +411,73 @@ static void fc_rport_timeout(struct work_struct *work) } /** - * fc_rport_error - Handler for any errors + * fc_rport_error - Error handler, called once retries have been exhausted * @rport: The fc_rport object * @fp: The frame pointer * - * If the error was caused by a resource allocation failure - * then wait for half a second and retry, otherwise retry - * immediately. - * * Locking Note: The rport lock is expected to be held before * calling this routine */ static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp) { struct fc_rport_libfc_priv *rdata = rport->dd_data; - unsigned long delay = 0; FC_DEBUG_RPORT("Error %ld in state %s, retries %d\n", PTR_ERR(fp), fc_rport_state(rport), rdata->retries); - if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) { - /* - * Memory allocation failure, or the exchange timed out. - * Retry after delay - */ - if (rdata->retries < rdata->local_port->max_retry_count) { - rdata->retries++; - if (!fp) - delay = msecs_to_jiffies(500); - get_device(&rport->dev); - schedule_delayed_work(&rdata->retry_work, delay); - } else { - switch (rdata->rp_state) { - case RPORT_ST_PLOGI: - case RPORT_ST_PRLI: - case RPORT_ST_LOGO: - rdata->event = RPORT_EV_FAILED; - queue_work(rport_event_queue, - &rdata->event_work); - break; - case RPORT_ST_RTV: - fc_rport_enter_ready(rport); - break; - case RPORT_ST_NONE: - case RPORT_ST_READY: - case RPORT_ST_INIT: - break; - } - } + switch (rdata->rp_state) { + case RPORT_ST_PLOGI: + case RPORT_ST_PRLI: + case RPORT_ST_LOGO: + rdata->event = RPORT_EV_FAILED; + queue_work(rport_event_queue, + &rdata->event_work); + break; + case RPORT_ST_RTV: + fc_rport_enter_ready(rport); + break; + case RPORT_ST_NONE: + case RPORT_ST_READY: + case RPORT_ST_INIT: + break; } } +/** + * fc_rport_error_retry - Error handler when retries are desired + * @rport: The fc_rport object + * @fp: The frame pointer + * + * If the error was an exchange timeout retry immediately, + * otherwise wait for E_D_TOV. + * + * Locking Note: The rport lock is expected to be held before + * calling this routine + */ +static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + unsigned long delay = FC_DEF_E_D_TOV; + + /* make sure this isn't an FC_EX_CLOSED error, never retry those */ + if (PTR_ERR(fp) == -FC_EX_CLOSED) + return fc_rport_error(rport, fp); + + if (rdata->retries < rdata->local_port->max_retry_count) { + FC_DEBUG_RPORT("Error %ld in state %s, retrying\n", + PTR_ERR(fp), fc_rport_state(rport)); + rdata->retries++; + /* no additional delay on exchange timeouts */ + if (PTR_ERR(fp) == -FC_EX_TIMEOUT) + delay = 0; + get_device(&rport->dev); + schedule_delayed_work(&rdata->retry_work, delay); + return; + } + + return fc_rport_error(rport, fp); +} + /** * fc_rport_plogi_recv_resp - Handle incoming ELS PLOGI response * @sp: current sequence in the PLOGI exchange @@ -495,7 +512,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, } if (IS_ERR(fp)) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); goto err; } @@ -527,7 +544,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, else fc_rport_enter_prli(rport); } else - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); out: fc_frame_free(fp); @@ -557,14 +574,14 @@ static void fc_rport_enter_plogi(struct fc_rport *rport) rport->maxframe_size = FC_MIN_MAX_PAYLOAD; fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi)); if (!fp) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); return; } rdata->e_d_tov = lport->e_d_tov; if (!lport->tt.elsct_send(lport, rport, fp, ELS_PLOGI, fc_rport_plogi_resp, rport, lport->e_d_tov)) - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); else get_device(&rport->dev); } @@ -604,7 +621,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, } if (IS_ERR(fp)) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); goto err; } @@ -662,7 +679,7 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, rport->port_id); if (IS_ERR(fp)) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); goto err; } @@ -712,13 +729,13 @@ static void fc_rport_enter_prli(struct fc_rport *rport) fp = fc_frame_alloc(lport, sizeof(*pp)); if (!fp) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); return; } if (!lport->tt.elsct_send(lport, rport, fp, ELS_PRLI, fc_rport_prli_resp, rport, lport->e_d_tov)) - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); else get_device(&rport->dev); } @@ -809,13 +826,13 @@ static void fc_rport_enter_rtv(struct fc_rport *rport) fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv)); if (!fp) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); return; } if (!lport->tt.elsct_send(lport, rport, fp, ELS_RTV, fc_rport_rtv_resp, rport, lport->e_d_tov)) - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); else get_device(&rport->dev); } @@ -840,13 +857,13 @@ static void fc_rport_enter_logo(struct fc_rport *rport) fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo)); if (!fp) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); return; } if (!lport->tt.elsct_send(lport, rport, fp, ELS_LOGO, fc_rport_logo_resp, rport, lport->e_d_tov)) - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); else get_device(&rport->dev); } diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h index 3e4801d2bdbb..1b7af3a64c7c 100644 --- a/include/scsi/fc/fc_fs.h +++ b/include/scsi/fc/fc_fs.h @@ -337,4 +337,9 @@ enum fc_pf_rjt_reason { FC_RJT_VENDOR = 0xff, /* vendor specific reject */ }; +/* default timeout values */ + +#define FC_DEF_E_D_TOV 2000UL +#define FC_DEF_R_A_TOV 10000UL + #endif /* _FC_FS_H_ */ -- cgit v1.2.3 From 26d9cab558f901051d0b69b2c445c8588931ce8d Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:55:07 -0800 Subject: [SCSI] libfc: fixed a read IO data integrity issue when a IO data frame lost The fc_fcp_complete_locked detected data underrun in this case and set the FC_DATA_UNDRUN but that was ignored by fc_io_compl for all cases including read underrun. Added code to not to ignore FC_DATA_UNDRUN for read IO and instead suggested scsi-ml to retry cmd to recover from lost data frame. Not sure if it is okay to ignore FC_DATA_UNDRUN for other case, so let code as is for other cases but removed or-ing with zero valued fsp->cdb_status for those cases. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_fcp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index f440aaca39c2..ecc72612c385 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -1810,12 +1810,12 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) sc_cmd->result = DID_ERROR << 16; break; case FC_DATA_UNDRUN: - if (fsp->cdb_status == 0) { + if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) { /* * scsi status is good but transport level - * underrun. for read it should be an error?? + * underrun. */ - sc_cmd->result = (DID_OK << 16) | fsp->cdb_status; + sc_cmd->result = DID_OK << 16; } else { /* * scsi got underrun, this is an error -- cgit v1.2.3 From f7db2c150cf5082cf74555f30a1305938041de80 Mon Sep 17 00:00:00 2001 From: Steve Ma Date: Fri, 27 Feb 2009 10:55:13 -0800 Subject: [SCSI] libfc: exch mgr is freed while lport still retrying sequences When a sequence cannot be delivered to the target, the local port will schedule retries, While this process is in progress, if we destroy the FCoE interface, the fcoe_sw_destroy routine is entered, and the fc_exch_mgr_free(lp->emp) is called. Thus if fc_exch_alloc() is called when retrying the sequence, the mempool_alloc() will fail to allocate the exchange because the mempool of the exchange manager has already been released. This patch is to cancel any pending retry work of the local port before we start to destroy the interface. Also, when resetting the local port, we should also stop the scheduled pending retries. Signed-off-by: Steve Ma Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_lport.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index a6ab692f5f51..e6ea4f119530 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -619,6 +619,7 @@ int fc_fabric_logoff(struct fc_lport *lport) mutex_lock(&lport->lp_mutex); fc_lport_enter_logo(lport); mutex_unlock(&lport->lp_mutex); + cancel_delayed_work_sync(&lport->retry_work); return 0; } EXPORT_SYMBOL(fc_fabric_logoff); @@ -918,6 +919,7 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_seq *sp, */ int fc_lport_reset(struct fc_lport *lport) { + cancel_delayed_work_sync(&lport->retry_work); mutex_lock(&lport->lp_mutex); fc_lport_enter_reset(lport); mutex_unlock(&lport->lp_mutex); -- cgit v1.2.3 From 5101ff99f59aefb72e0c96e82aa32048ac9f8425 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:18 -0800 Subject: [SCSI] libfc: Don't violate transport template for rogue port creation Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_disc.c | 6 +++--- drivers/scsi/libfc/fc_lport.c | 4 ++-- drivers/scsi/libfc/fc_rport.c | 3 +++ include/scsi/libfc.h | 5 +++++ 4 files changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index dd1564c9e04a..15e3f840c049 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -430,7 +430,7 @@ static int fc_disc_new_target(struct fc_disc *disc, dp.ids.port_name = ids->port_name; dp.ids.node_name = ids->node_name; dp.ids.roles = ids->roles; - rport = fc_rport_rogue_create(&dp); + rport = lport->tt.rport_create(&dp); } if (!rport) error = -ENOMEM; @@ -617,7 +617,7 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len) if ((dp.ids.port_id != fc_host_port_id(lport->host)) && (dp.ids.port_name != lport->wwpn)) { - rport = fc_rport_rogue_create(&dp); + rport = lport->tt.rport_create(&dp); if (rport) { rdata = rport->dd_data; rdata->ops = &fc_disc_rport_ops; @@ -769,7 +769,7 @@ static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp) if (rport) fc_disc_del_target(disc, rport); - new_rport = fc_rport_rogue_create(dp); + new_rport = lport->tt.rport_create(dp); if (new_rport) { rdata = new_rport->dd_data; rdata->ops = &fc_disc_rport_ops; diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index e6ea4f119530..07335ae2947c 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -232,7 +232,7 @@ static void fc_lport_ptp_setup(struct fc_lport *lport, lport->ptp_rp = NULL; } - lport->ptp_rp = fc_rport_rogue_create(&dp); + lport->ptp_rp = lport->tt.rport_create(&dp); lport->tt.rport_login(lport->ptp_rp); @@ -1282,7 +1282,7 @@ static void fc_lport_enter_dns(struct fc_lport *lport) fc_lport_state_enter(lport, LPORT_ST_DNS); - rport = fc_rport_rogue_create(&dp); + rport = lport->tt.rport_create(&dp); if (!rport) goto err; diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 600a8fffa940..81b3ca188789 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -1271,6 +1271,9 @@ static void fc_rport_flush_queue(void) int fc_rport_init(struct fc_lport *lport) { + if (!lport->tt.rport_create) + lport->tt.rport_create = fc_rport_rogue_create; + if (!lport->tt.rport_login) lport->tt.rport_login = fc_rport_login; diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index b9e6c1cd8914..37df48e13b97 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -489,6 +489,11 @@ struct libfc_function_template { * Remote Port interfaces */ + /* + * Create a remote port + */ + struct fc_rport *(*rport_create)(struct fc_disc_port *); + /* * Initiates the RP state machine. It is called from the LP module. * This function will issue the following commands to the N_Port -- cgit v1.2.3 From 23f11f9076fcd6ee20c56e413b11f1b5658e3f82 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:23 -0800 Subject: [SCSI] libfc: correct RPORT_TO_PRIV usage We only need to use this macro when assigning a value to rport->dd_data. All other accesses should just use dd_data. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_disc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 15e3f840c049..9f4e408bc7fc 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -246,7 +246,7 @@ static void fc_disc_recv_rscn_req(struct fc_seq *sp, struct fc_frame *fp, list_del(&dp->peers); rport = lport->tt.rport_lookup(lport, dp->ids.port_id); if (rport) { - rdata = RPORT_TO_PRIV(rport); + rdata = rport->dd_data; list_del(&rdata->peers); lport->tt.rport_logoff(rport); } @@ -453,7 +453,7 @@ static int fc_disc_new_target(struct fc_disc *disc, static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport) { struct fc_lport *lport = disc->lport; - struct fc_rport_libfc_priv *rdata = RPORT_TO_PRIV(rport); + struct fc_rport_libfc_priv *rdata = rport->dd_data; list_del(&rdata->peers); lport->tt.rport_logoff(rport); } -- cgit v1.2.3 From d3b33327cab0c8e9cae2c12d908ca79433c0d1ac Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:29 -0800 Subject: [SCSI] libfc: rename rp to rdata in fc_disc_new_target() Just rename the variable as per our naming convention. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_disc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 9f4e408bc7fc..cfbce893941a 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -396,7 +396,7 @@ static int fc_disc_new_target(struct fc_disc *disc, struct fc_rport_identifiers *ids) { struct fc_lport *lport = disc->lport; - struct fc_rport_libfc_priv *rp; + struct fc_rport_libfc_priv *rdata; int error = 0; if (rport && ids->port_name) { @@ -436,9 +436,9 @@ static int fc_disc_new_target(struct fc_disc *disc, error = -ENOMEM; } if (rport) { - rp = rport->dd_data; - rp->ops = &fc_disc_rport_ops; - rp->rp_state = RPORT_ST_INIT; + rdata = rport->dd_data; + rdata->ops = &fc_disc_rport_ops; + rdata->rp_state = RPORT_ST_INIT; lport->tt.rport_login(rport); } } -- cgit v1.2.3 From efaf5c085dd2d31757b0ff7886970dfddd8d1808 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:34 -0800 Subject: [SCSI] libfc: check for err when recv and state is incorrect If we've just created an interface and the an rport is logging in we may have a request on the wire (say PRLI). If we destroy the interface, we'll go through each rport on the disc->rports list and set each rport's state to NONE. Then the lport will reset the EM. The EM reset will send a CLOSED event to the prli_resp() handler which will notice that the state != PRLI. In this case it frees the frame pointer, decrements the refcount and unlocks the rport. The problem is that there isn't a frame in this case. It's just a pointer with an embedded error code. The free causes an Oops. This patch moves the error checking to be before the state checking. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_lport.c | 50 +++++++++++++++++++++---------------------- drivers/scsi/libfc/fc_rport.c | 30 +++++++++++++------------- 2 files changed, 40 insertions(+), 40 deletions(-) diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 07335ae2947c..c00de2244c78 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1031,17 +1031,17 @@ static void fc_lport_rft_id_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a RFT_ID response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_RFT_ID) { FC_DBG("Received a RFT_ID response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); @@ -1083,17 +1083,17 @@ static void fc_lport_rpn_id_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a RPN_ID response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_RPN_ID) { FC_DBG("Received a RPN_ID response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); if (fh && ct && fh->fh_type == FC_TYPE_CT && @@ -1133,17 +1133,17 @@ static void fc_lport_scr_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a SCR response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_SCR) { FC_DBG("Received a SCR response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_ready(lport); @@ -1359,17 +1359,17 @@ static void fc_lport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a LOGO response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_LOGO) { FC_DBG("Received a LOGO response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_reset(lport); @@ -1443,17 +1443,17 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a FLOGI response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_FLOGI) { FC_DBG("Received a FLOGI response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - fh = fc_frame_header_get(fp); did = ntoh24(fh->fh_d_id); if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) { diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 81b3ca188789..4f23a9bb15a1 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -505,17 +505,17 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n", rport->port_id); + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + if (rdata->rp_state != RPORT_ST_PLOGI) { FC_DBG("Received a PLOGI response, but in state %s\n", fc_rport_state(rport)); goto out; } - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC && (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) { @@ -614,17 +614,17 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n", rport->port_id); + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + if (rdata->rp_state != RPORT_ST_PRLI) { FC_DBG("Received a PRLI response, but in state %s\n", fc_rport_state(rport)); goto out; } - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { pp = fc_frame_payload_get(fp, sizeof(*pp)); @@ -764,17 +764,17 @@ static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n", rport->port_id); + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + if (rdata->rp_state != RPORT_ST_RTV) { FC_DBG("Received a RTV response, but in state %s\n", fc_rport_state(rport)); goto out; } - if (IS_ERR(fp)) { - fc_rport_error(rport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { struct fc_els_rtv_acc *rtv; -- cgit v1.2.3 From 0ae4d4ae47d2ccbcad813b0d6d8fe12590c7d648 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:39 -0800 Subject: [SCSI] libfc: Cleanup libfc_function_template comments Made the comments more like the comments for struct scsi_host_template. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- include/scsi/libfc.h | 107 +++++++++++++++++++++++++++++++-------------------- 1 file changed, 66 insertions(+), 41 deletions(-) diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 37df48e13b97..282829cdf352 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -336,31 +336,17 @@ struct fc_exch { struct libfc_function_template { - /** - * Mandatory Fields - * - * These handlers must be implemented by the LLD. - */ - /* * Interface to send a FC frame - */ - int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp); - - /** - * Optional Fields * - * The LLD may choose to implement any of the following handlers. - * If LLD doesn't specify hander and leaves its pointer NULL then - * the default libfc function will be used for that handler. - */ - - /** - * ELS/CT interfaces + * STATUS: REQUIRED */ + int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp); /* - * elsct_send - sends ELS/CT frame + * Interface to send ELS/CT frames + * + * STATUS: OPTIONAL */ struct fc_seq *(*elsct_send)(struct fc_lport *lport, struct fc_rport *rport, @@ -370,9 +356,6 @@ struct libfc_function_template { struct fc_frame *fp, void *arg), void *arg, u32 timer_msec); - /** - * Exhance Manager interfaces - */ /* * Send the FC frame payload using a new exchange and sequence. @@ -404,6 +387,8 @@ struct libfc_function_template { * timer_msec argument is specified. The timer is canceled when * it fires or when the exchange is done. The exchange timeout handler * is registered by EM layer. + * + * STATUS: OPTIONAL */ struct fc_seq *(*exch_seq_send)(struct fc_lport *lp, struct fc_frame *fp, @@ -415,14 +400,18 @@ struct libfc_function_template { void *arg, unsigned int timer_msec); /* - * send a frame using existing sequence and exchange. + * Send a frame using an existing sequence and exchange. + * + * STATUS: OPTIONAL */ int (*seq_send)(struct fc_lport *lp, struct fc_seq *sp, struct fc_frame *fp); /* - * Send ELS response using mainly infomation - * in exchange and sequence in EM layer. + * Send an ELS response using infomation from a previous + * exchange and sequence. + * + * STATUS: OPTIONAL */ void (*seq_els_rsp_send)(struct fc_seq *sp, enum fc_els_cmd els_cmd, struct fc_seq_els_data *els_data); @@ -434,6 +423,8 @@ struct libfc_function_template { * A timer_msec can be specified for abort timeout, if non-zero * timer_msec value is specified then exchange resp handler * will be called with timeout error if no response to abort. + * + * STATUS: OPTIONAL */ int (*seq_exch_abort)(const struct fc_seq *req_sp, unsigned int timer_msec); @@ -441,6 +432,8 @@ struct libfc_function_template { /* * Indicate that an exchange/sequence tuple is complete and the memory * allocated for the related objects may be freed. + * + * STATUS: OPTIONAL */ void (*exch_done)(struct fc_seq *sp); @@ -448,6 +441,8 @@ struct libfc_function_template { * Assigns a EM and a free XID for an new exchange and then * allocates a new exchange and sequence pair. * The fp can be used to determine free XID. + * + * STATUS: OPTIONAL */ struct fc_exch *(*exch_get)(struct fc_lport *lp, struct fc_frame *fp); @@ -455,12 +450,16 @@ struct libfc_function_template { * Release previously assigned XID by exch_get API. * The LLD may implement this if XID is assigned by LLD * in exch_get(). + * + * STATUS: OPTIONAL */ void (*exch_put)(struct fc_lport *lp, struct fc_exch_mgr *mp, u16 ex_id); /* * Start a new sequence on the same exchange/sequence tuple. + * + * STATUS: OPTIONAL */ struct fc_seq *(*seq_start_next)(struct fc_seq *sp); @@ -468,26 +467,33 @@ struct libfc_function_template { * Reset an exchange manager, completing all sequences and exchanges. * If s_id is non-zero, reset only exchanges originating from that FID. * If d_id is non-zero, reset only exchanges sending to that FID. + * + * STATUS: OPTIONAL */ void (*exch_mgr_reset)(struct fc_lport *, u32 s_id, u32 d_id); - void (*rport_flush_queue)(void); - /** - * Local Port interfaces + /* + * Flush the rport work queue. Generally used before shutdown. + * + * STATUS: OPTIONAL */ + void (*rport_flush_queue)(void); /* - * Receive a frame to a local port. + * Receive a frame for a local port. + * + * STATUS: OPTIONAL */ void (*lport_recv)(struct fc_lport *lp, struct fc_seq *sp, struct fc_frame *fp); - int (*lport_reset)(struct fc_lport *); - - /** - * Remote Port interfaces + /* + * Reset the local port. + * + * STATUS: OPTIONAL */ + int (*lport_reset)(struct fc_lport *); /* * Create a remote port @@ -502,26 +508,33 @@ struct libfc_function_template { * - PLOGI * - PRLI * - RTV + * + * STATUS: OPTIONAL */ int (*rport_login)(struct fc_rport *rport); /* * Logoff, and remove the rport from the transport if * it had been added. This will send a LOGO to the target. + * + * STATUS: OPTIONAL */ int (*rport_logoff)(struct fc_rport *rport); /* * Recieve a request from a remote port. + * + * STATUS: OPTIONAL */ void (*rport_recv_req)(struct fc_seq *, struct fc_frame *, struct fc_rport *); - struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32); - - /** - * FCP interfaces + /* + * lookup an rport by it's port ID. + * + * STATUS: OPTIONAL */ + struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32); /* * Send a fcp cmd from fsp pkt. @@ -529,30 +542,38 @@ struct libfc_function_template { * * The resp handler is called when FCP_RSP received. * + * STATUS: OPTIONAL */ int (*fcp_cmd_send)(struct fc_lport *lp, struct fc_fcp_pkt *fsp, void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg)); /* - * Used at least durring linkdown and reset + * Cleanup the FCP layer, used durring link down and reset + * + * STATUS: OPTIONAL */ void (*fcp_cleanup)(struct fc_lport *lp); /* * Abort all I/O on a local port + * + * STATUS: OPTIONAL */ void (*fcp_abort_io)(struct fc_lport *lp); - /** - * Discovery interfaces + /* + * Receive a request for the discovery layer. + * + * STATUS: OPTIONAL */ - void (*disc_recv_req)(struct fc_seq *, struct fc_frame *, struct fc_lport *); /* * Start discovery for a local port. + * + * STATUS: OPTIONAL */ void (*disc_start)(void (*disc_callback)(struct fc_lport *, enum fc_disc_event), @@ -561,6 +582,8 @@ struct libfc_function_template { /* * Stop discovery for a given lport. This will remove * all discovered rports + * + * STATUS: OPTIONAL */ void (*disc_stop) (struct fc_lport *); @@ -568,6 +591,8 @@ struct libfc_function_template { * Stop discovery for a given lport. This will block * until all discovered rports are deleted from the * FC transport class + * + * STATUS: OPTIONAL */ void (*disc_stop_final) (struct fc_lport *); }; -- cgit v1.2.3 From ff392c497b43ddedbab5627b53928a654cc5486e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 3 Mar 2009 14:48:36 -0500 Subject: xfs: prevent kernel crash due to corrupted inode log format Andras Korn reported an oops on log replay causes by a corrupted xfs_inode_log_format_t passing a 0 size to kmem_zalloc. This patch handles to small or too large numbers of log regions gracefully by rejecting the log replay with a useful error message. Signed-off-by: Christoph Hellwig Reported-by: Andras Korn Reviewed-by: Eric Sandeen Signed-off-by: Felix Blyakher --- fs/xfs/xfs_log_recover.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index b1047de2fffd..61af610d79b3 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1455,10 +1455,19 @@ xlog_recover_add_to_trans( item = item->ri_prev; if (item->ri_total == 0) { /* first region to be added */ - item->ri_total = in_f->ilf_size; - ASSERT(item->ri_total <= XLOG_MAX_REGIONS_IN_ITEM); - item->ri_buf = kmem_zalloc((item->ri_total * - sizeof(xfs_log_iovec_t)), KM_SLEEP); + if (in_f->ilf_size == 0 || + in_f->ilf_size > XLOG_MAX_REGIONS_IN_ITEM) { + xlog_warn( + "XFS: bad number of regions (%d) in inode log format", + in_f->ilf_size); + ASSERT(0); + return XFS_ERROR(EIO); + } + + item->ri_total = in_f->ilf_size; + item->ri_buf = + kmem_zalloc(item->ri_total * sizeof(xfs_log_iovec_t), + KM_SLEEP); } ASSERT(item->ri_total > item->ri_cnt); /* Description region is ri_buf[0] */ -- cgit v1.2.3 From 7d46be4a25fdfb503c20bad60a618adebfe2ac5c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 3 Mar 2009 14:48:35 -0500 Subject: xfs: prevent lockdep false positive in xfs_iget_cache_miss The inode can't be locked by anyone else as we just created it a few lines above and it's not been added to any lookup data structure yet. So use a trylock that must succeed to get around the lockdep warnings. Signed-off-by: Christoph Hellwig Reported-by: Alexander Beregalov Reviewed-by: Eric Sandeen Reviewed-by: Felix Blyakher Signed-off-by: Felix Blyakher --- fs/xfs/xfs_iget.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c index e2fb6210d4c5..478e587087fe 100644 --- a/fs/xfs/xfs_iget.c +++ b/fs/xfs/xfs_iget.c @@ -246,9 +246,6 @@ xfs_iget_cache_miss( goto out_destroy; } - if (lock_flags) - xfs_ilock(ip, lock_flags); - /* * Preload the radix tree so we can insert safely under the * write spinlock. Note that we cannot sleep inside the preload @@ -256,7 +253,16 @@ xfs_iget_cache_miss( */ if (radix_tree_preload(GFP_KERNEL)) { error = EAGAIN; - goto out_unlock; + goto out_destroy; + } + + /* + * Because the inode hasn't been added to the radix-tree yet it can't + * be found by another thread, so we can do the non-sleeping lock here. + */ + if (lock_flags) { + if (!xfs_ilock_nowait(ip, lock_flags)) + BUG(); } mask = ~(((XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog)) - 1); @@ -284,7 +290,6 @@ xfs_iget_cache_miss( out_preload_end: write_unlock(&pag->pag_ici_lock); radix_tree_preload_end(); -out_unlock: if (lock_flags) xfs_iunlock(ip, lock_flags); out_destroy: -- cgit v1.2.3 From c141b2928fe20396a9ecdec85526e4b66ae96c90 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 3 Mar 2009 14:48:37 -0500 Subject: xfs: only issues a cache flush on unmount if barriers are enabled Currently we unconditionally issue a flush from xfs_free_buftarg, but since 2.6.29-rc1 this gives a warning in the style of end_request: I/O error, dev vdb, sector 0 Signed-off-by: Christoph Hellwig Reviewed-by: Eric Sandeen Signed-off-by: Felix Blyakher --- fs/xfs/linux-2.6/xfs_buf.c | 12 ++++++++++-- fs/xfs/linux-2.6/xfs_buf.h | 2 +- fs/xfs/linux-2.6/xfs_super.c | 10 +++++----- 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c index cb329edc925b..aa1016bb9134 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/linux-2.6/xfs_buf.c @@ -34,6 +34,12 @@ #include #include +#include "xfs_sb.h" +#include "xfs_inum.h" +#include "xfs_ag.h" +#include "xfs_dmapi.h" +#include "xfs_mount.h" + static kmem_zone_t *xfs_buf_zone; STATIC int xfsbufd(void *); STATIC int xfsbufd_wakeup(int, gfp_t); @@ -1435,10 +1441,12 @@ xfs_unregister_buftarg( void xfs_free_buftarg( - xfs_buftarg_t *btp) + struct xfs_mount *mp, + struct xfs_buftarg *btp) { xfs_flush_buftarg(btp, 1); - xfs_blkdev_issue_flush(btp); + if (mp->m_flags & XFS_MOUNT_BARRIER) + xfs_blkdev_issue_flush(btp); xfs_free_bufhash(btp); iput(btp->bt_mapping->host); diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h index 288ae7c4c800..9b4d666ad31f 100644 --- a/fs/xfs/linux-2.6/xfs_buf.h +++ b/fs/xfs/linux-2.6/xfs_buf.h @@ -413,7 +413,7 @@ static inline int XFS_bwrite(xfs_buf_t *bp) * Handling of buftargs. */ extern xfs_buftarg_t *xfs_alloc_buftarg(struct block_device *, int); -extern void xfs_free_buftarg(xfs_buftarg_t *); +extern void xfs_free_buftarg(struct xfs_mount *, struct xfs_buftarg *); extern void xfs_wait_buftarg(xfs_buftarg_t *); extern int xfs_setsize_buftarg(xfs_buftarg_t *, unsigned int, unsigned int); extern int xfs_flush_buftarg(xfs_buftarg_t *, int); diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index c71e226da7f5..32ae5028e96b 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -734,15 +734,15 @@ xfs_close_devices( { if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) { struct block_device *logdev = mp->m_logdev_targp->bt_bdev; - xfs_free_buftarg(mp->m_logdev_targp); + xfs_free_buftarg(mp, mp->m_logdev_targp); xfs_blkdev_put(logdev); } if (mp->m_rtdev_targp) { struct block_device *rtdev = mp->m_rtdev_targp->bt_bdev; - xfs_free_buftarg(mp->m_rtdev_targp); + xfs_free_buftarg(mp, mp->m_rtdev_targp); xfs_blkdev_put(rtdev); } - xfs_free_buftarg(mp->m_ddev_targp); + xfs_free_buftarg(mp, mp->m_ddev_targp); } /* @@ -811,9 +811,9 @@ xfs_open_devices( out_free_rtdev_targ: if (mp->m_rtdev_targp) - xfs_free_buftarg(mp->m_rtdev_targp); + xfs_free_buftarg(mp, mp->m_rtdev_targp); out_free_ddev_targ: - xfs_free_buftarg(mp->m_ddev_targp); + xfs_free_buftarg(mp, mp->m_ddev_targp); out_close_rtdev: if (rtdev) xfs_blkdev_put(rtdev); -- cgit v1.2.3 From d15bd1067b1fcb2b7250d22bc0c7c7fea0b759f7 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Sat, 7 Mar 2009 13:31:29 +0100 Subject: kbuild: fix C libary confusion in unifdef.c due to getline() This fixes an error when compiling the kernel. CHK include/linux/version.h HOSTCC scripts/unifdef scripts/unifdef.c:209: error: conflicting types for 'getline' /usr/include/stdio.h:651: note: previous declaration of 'getline' was here make[1]: *** [scripts/unifdef] Error 1 make: *** [__headers] Error 2 Signed-off-by: Justin P. Mattock Cc: Frederic Weisbecker Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- scripts/unifdef.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/scripts/unifdef.c b/scripts/unifdef.c index 552025e72acb..05a31a6c7e1b 100644 --- a/scripts/unifdef.c +++ b/scripts/unifdef.c @@ -206,7 +206,7 @@ static void done(void); static void error(const char *); static int findsym(const char *); static void flushline(bool); -static Linetype getline(void); +static Linetype get_line(void); static Linetype ifeval(const char **); static void ignoreoff(void); static void ignoreon(void); @@ -512,7 +512,7 @@ process(void) for (;;) { linenum++; - lineval = getline(); + lineval = get_line(); trans_table[ifstate[depth]][lineval](); debug("process %s -> %s depth %d", linetype_name[lineval], @@ -526,7 +526,7 @@ process(void) * help from skipcomment(). */ static Linetype -getline(void) +get_line(void) { const char *cp; int cursym; -- cgit v1.2.3 From a2ebcc7a863761b6d59a4183c600edf5af63b8d2 Mon Sep 17 00:00:00 2001 From: Josh Hunt Date: Sun, 22 Feb 2009 10:54:55 -0800 Subject: kbuild: fix mkspec to cleanup RPM_BUILD_ROOT The contents of the %clean section in mkspec is currently commented out leaving RPM_BUILD_ROOT and its contents on the build machine. This patch removes it once the rpm build process is complete. Signed-off-by: Josh Hunt Signed-off-by: Sam Ravnborg --- scripts/package/mkspec | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/package/mkspec b/scripts/package/mkspec index ee448cdc6a2b..3d93f8c81252 100755 --- a/scripts/package/mkspec +++ b/scripts/package/mkspec @@ -96,7 +96,7 @@ echo "%endif" echo "" echo "%clean" -echo '#echo -rf $RPM_BUILD_ROOT' +echo 'rm -rf $RPM_BUILD_ROOT' echo "" echo "%files" echo '%defattr (-, root, root)' -- cgit v1.2.3 From b925dbfe3c59b637666670a60473a15d29e0a7a7 Mon Sep 17 00:00:00 2001 From: Josh Hunt Date: Thu, 12 Feb 2009 10:16:05 -0800 Subject: kbuild: fix 'make rpm' when CONFIG_LOCALVERSION_AUTO=y and using SCM tree Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel source tree under SCM. This is due to KERNELRELEASE being different when the initial make is run and when make is run from rpmbuild. mkspec creates kernel.spec using KERNELRELEASE: echo "%files" echo '%defattr (-, root, root)' echo "%dir /lib/modules" echo "/lib/modules/$KERNELRELEASE" echo "/lib/firmware" echo "/boot/*" echo "" When CONFIG_LOCALVERSION_AUTO=y scripts/setlocalversion is called and grabs any additional version info from SCM. Next, the srctree is tarred up and SCM information is excluded. rpmbuild reruns make and in the process generates a new include/config/kernel.release and thus a new KERNELRELEASE. However this time the SCM information is gone so KERNELRELEASE no longer has the additional version information. When "make modules_install" runs, it uses the new KERNELRELEASE value to determine where to install the modules. This conflicts with where the spec file assumes they are going because of the mis-matching KERNELRELEASE versions. + INSTALL_MOD_PATH=/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root + make -j16 modules_install INSTALL crypto/aead.ko INSTALL crypto/cbc.ko INSTALL crypto/chainiv.ko INSTALL crypto/crc32c.ko INSTALL crypto/crypto_algapi.ko INSTALL crypto/crypto_blkcipher.ko INSTALL crypto/crypto_hash.ko INSTALL crypto/cryptomgr.ko INSTALL crypto/ecb.ko INSTALL crypto/eseqiv.ko INSTALL crypto/krng.ko INSTALL crypto/md5.ko INSTALL crypto/pcbc.ko INSTALL crypto/rng.ko INSTALL drivers/block/cciss.ko INSTALL drivers/hid/hid-dummy.ko INSTALL drivers/scsi/iscsi_tcp.ko INSTALL drivers/scsi/libiscsi.ko INSTALL drivers/scsi/libiscsi_tcp.ko INSTALL drivers/scsi/scsi_transport_iscsi.ko INSTALL drivers/scsi/scsi_wait_scan.ko INSTALL fs/lockd/lockd.ko INSTALL fs/nfs/nfs.ko INSTALL fs/nfsd/nfsd.ko INSTALL lib/libcrc32c.ko INSTALL net/sunrpc/sunrpc.ko DEPMOD 2.6.29-rc4-tip + cp arch/x86/boot/bzImage /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinuz-2.6.29-rc4-tip-01479-g5d85422 + cp System.map /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/System.map-2.6.29-rc4-tip-01479-g5d85422 + cp .config /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/config-2.6.29-rc4-tip-01479-g5d85422 + cp vmlinux vmlinux.orig + bzip2 -9 vmlinux + mv vmlinux.bz2 /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinux-2.6.29-rc4-tip-01479-g5d85422.bz2 + mv vmlinux.orig vmlinux + /usr/lib/rpm/brp-compress Processing files: kernel-2.6.29rc4tip01479g5d85422-2 error: File not found: /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422 RPM build errors: File not found: /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422 make[1]: *** [rpm] Error 1 make: *** [rpm] Error 2 I have tested this patch on git -tip, Linus' git tree, and the kernel.org tar files, both with and without CONFIG_LOCALVERSION_AUTO=y. Signed-off-by: Josh Hunt Signed-off-by: Sam Ravnborg ---- --- Makefile | 16 +++++++++++----- scripts/package/Makefile | 3 ++- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/Makefile b/Makefile index d04ee0ad1dcc..55424172bea4 100644 --- a/Makefile +++ b/Makefile @@ -904,12 +904,18 @@ localver = $(subst $(space),, $(string) \ # and if the SCM is know a tag from the SCM is appended. # The appended tag is determined by the SCM used. # -# Currently, only git is supported. -# Other SCMs can edit scripts/setlocalversion and add the appropriate -# checks as needed. +# .scmversion is used when generating rpm packages so we do not loose +# the version information from the SCM when we do the build of the kernel +# from the copied source ifdef CONFIG_LOCALVERSION_AUTO - _localver-auto = $(shell $(CONFIG_SHELL) \ - $(srctree)/scripts/setlocalversion $(srctree)) + +ifeq ($(wildcard .scmversion),) + _localver-auto = $(shell $(CONFIG_SHELL) \ + $(srctree)/scripts/setlocalversion $(srctree)) +else + _localver-auto = $(shell cat .scmversion 2> /dev/null) +endif + localver-auto = $(LOCALVERSION)$(_localver-auto) endif diff --git a/scripts/package/Makefile b/scripts/package/Makefile index 8c6b7b09606a..fa4a0a17b7e0 100644 --- a/scripts/package/Makefile +++ b/scripts/package/Makefile @@ -35,9 +35,10 @@ $(objtree)/kernel.spec: $(MKSPEC) $(srctree)/Makefile rpm-pkg rpm: $(objtree)/kernel.spec FORCE $(MAKE) clean $(PREV) ln -sf $(srctree) $(KERNELPATH) + $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion > $(objtree)/.scmversion $(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/. $(PREV) rm $(KERNELPATH) - + rm -f $(objtree)/.scmversion set -e; \ $(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version set -e; \ -- cgit v1.2.3 From 75bccd881a49d2da796ec0852158f957dc023f61 Mon Sep 17 00:00:00 2001 From: Gilles Espinasse Date: Sat, 7 Mar 2009 13:57:25 +0100 Subject: kbuild: remove unused -r option for module-init-tool depmod Following a thread on busybox mailing list depmod -r option is ignored by module-init-tools depmod -r option break busybox depmod. So the best solution look to remove -r from kernel Makefile Signed-off-by: Gilles Espinasse Signed-off-by: Sam Ravnborg --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 55424172bea4..5a5b82eaaec2 100644 --- a/Makefile +++ b/Makefile @@ -1543,7 +1543,7 @@ quiet_cmd_depmod = DEPMOD $(KERNELRELEASE) cmd_depmod = \ if [ -r System.map -a -x $(DEPMOD) ]; then \ $(DEPMOD) -ae -F System.map \ - $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r) \ + $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \ $(KERNELRELEASE); \ fi -- cgit v1.2.3 From 0796e75503adc6b0a119493ce2e599fb5fd8f96e Mon Sep 17 00:00:00 2001 From: Friedrich Oslage Date: Sun, 8 Mar 2009 20:13:42 -0700 Subject: sunhme: Fix qfe parent detection. Signed-off-by: Friedrich Oslage Signed-off-by: David S. Miller --- drivers/net/sunhme.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c index cc4013be5e18..0ff837a9c804 100644 --- a/drivers/net/sunhme.c +++ b/drivers/net/sunhme.c @@ -2630,8 +2630,6 @@ static int __devinit happy_meal_sbus_probe_one(struct of_device *op, int is_qfe) int err = -ENODEV; sbus_dp = to_of_device(op->dev.parent)->node; - if (is_qfe) - sbus_dp = to_of_device(op->dev.parent->parent)->node; /* We can match PCI devices too, do not accept those here. */ if (strcmp(sbus_dp->name, "sbus")) -- cgit v1.2.3 From ed75d8635abde0c43d26152014e386706475120e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 5 Mar 2009 13:25:06 +0000 Subject: powerpc: fix linkstation and storcenter compilation breakage Defining flash partition table in platform code is deprecated, and due to recent changes linkstation and storcenter do not compile any more with their default configurations because of undefined references to physmap_set_partitions(). Instead of fixing them by using the correct kernel configuration macro in preprocessor conditional, remove partition table definitions altogether. Instead add support for partition definition on the command-line and in device tree to the default configurations. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Kumar Gala --- arch/powerpc/configs/linkstation_defconfig | 36 +++++++++++++--------- arch/powerpc/configs/storcenter_defconfig | 35 ++++++++++++++-------- arch/powerpc/platforms/embedded6xx/linkstation.c | 38 ------------------------ arch/powerpc/platforms/embedded6xx/storcenter.c | 32 -------------------- 4 files changed, 44 insertions(+), 97 deletions(-) diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index aa5855a156de..15900dcf0bfa 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:29 2009 +# Linux kernel version: 2.6.29-rc6 +# Fri Mar 6 00:07:38 2009 # # CONFIG_PPC64 is not set @@ -71,6 +71,15 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -88,6 +97,7 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -153,11 +163,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -294,7 +299,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y @@ -508,8 +512,8 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_OF_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -587,7 +591,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -617,13 +620,19 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=m +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -839,6 +848,7 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -1037,8 +1047,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 86512c8790d1..94903465ea12 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:46 2009 +# Linux kernel version: 2.6.29-rc6 +# Fri Mar 6 00:09:08 2009 # # CONFIG_PPC64 is not set @@ -71,6 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -144,11 +153,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -377,8 +381,8 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_OF_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -452,7 +456,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -478,13 +481,19 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -677,6 +686,7 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -818,8 +828,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -1159,6 +1167,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_EXPORTFS=m # # Partition Types diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index 2ca7be65c2d2..244f997de791 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -12,7 +12,6 @@ #include #include -#include #include #include @@ -22,39 +21,6 @@ #include "mpc10x.h" -static struct mtd_partition linkstation_physmap_partitions[] = { - { - .name = "mtd_firmimg", - .offset = 0x000000, - .size = 0x300000, - }, - { - .name = "mtd_bootcode", - .offset = 0x300000, - .size = 0x070000, - }, - { - .name = "mtd_status", - .offset = 0x370000, - .size = 0x010000, - }, - { - .name = "mtd_conf", - .offset = 0x380000, - .size = 0x080000, - }, - { - .name = "mtd_allflash", - .offset = 0x000000, - .size = 0x400000, - }, - { - .name = "mtd_data", - .offset = 0x310000, - .size = 0x0f0000, - }, -}; - static __initdata struct of_device_id of_bus_ids[] = { { .type = "soc", }, { .compatible = "simple-bus", }, @@ -99,10 +65,6 @@ static int __init linkstation_add_bridge(struct device_node *dev) static void __init linkstation_setup_arch(void) { struct device_node *np; -#ifdef CONFIG_MTD_PHYSMAP - physmap_set_partitions(linkstation_physmap_partitions, - ARRAY_SIZE(linkstation_physmap_partitions)); -#endif /* Lookup PCI host bridges */ for_each_compatible_node(np, "pci", "mpc10x-pci") diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c index 8864e4884980..613070e9ddbe 100644 --- a/arch/powerpc/platforms/embedded6xx/storcenter.c +++ b/arch/powerpc/platforms/embedded6xx/storcenter.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include @@ -26,32 +25,6 @@ #include "mpc10x.h" -#ifdef CONFIG_MTD_PHYSMAP -static struct mtd_partition storcenter_physmap_partitions[] = { - { - .name = "kernel", - .offset = 0x000000, - .size = 0x170000, - }, - { - .name = "rootfs", - .offset = 0x170000, - .size = 0x590000, - }, - { - .name = "uboot", - .offset = 0x700000, - .size = 0x040000, - }, - { - .name = "config", - .offset = 0x740000, - .size = 0x0c0000, - }, -}; -#endif - - static __initdata struct of_device_id storcenter_of_bus[] = { { .name = "soc", }, {}, @@ -96,11 +69,6 @@ static void __init storcenter_setup_arch(void) { struct device_node *np; -#ifdef CONFIG_MTD_PHYSMAP - physmap_set_partitions(storcenter_physmap_partitions, - ARRAY_SIZE(storcenter_physmap_partitions)); -#endif - /* Lookup PCI host bridges */ for_each_compatible_node(np, "pci", "mpc10x-pci") storcenter_add_bridge(np); -- cgit v1.2.3 From 34f42a070fc98f5dc07e9fa2338b7b8d1dc347eb Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:45 -0800 Subject: [SCSI] libfc, fcoe: Fix kerneldoc comments 1) Added '()' for function names in kerneldoc comments 2) Changed comment bookends from '**/' to '*/'. The comment on the the mailing list was that '**/' "is consistently unconventional. Not wrong, just odd." The Documentation/kernel-doc-nano-HOWTO.txt states that kerneldoc comment blocks should end with '**/' but most (if not all) instance I found under drivers/scsi/ were only using the '*/' so I converted to that style. 3) Removed incorrect linebreaks in kerneldoc comments where found 4) Removed a few unnecessary blank comment lines in kerneldoc comment blocks Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fc_transport_fcoe.c | 77 ++++++++-------- drivers/scsi/fcoe/fcoe_sw.c | 42 ++++----- drivers/scsi/fcoe/libfcoe.c | 162 +++++++++++++++++----------------- drivers/scsi/libfc/fc_disc.c | 45 +++++----- drivers/scsi/libfc/fc_fcp.c | 46 +++++----- drivers/scsi/libfc/fc_lport.c | 77 ++++++++-------- drivers/scsi/libfc/fc_rport.c | 46 +++++----- include/scsi/libfc.h | 14 +-- 8 files changed, 252 insertions(+), 257 deletions(-) diff --git a/drivers/scsi/fcoe/fc_transport_fcoe.c b/drivers/scsi/fcoe/fc_transport_fcoe.c index bf7fe6fc0820..0eea4c434c31 100644 --- a/drivers/scsi/fcoe/fc_transport_fcoe.c +++ b/drivers/scsi/fcoe/fc_transport_fcoe.c @@ -33,19 +33,19 @@ static LIST_HEAD(fcoe_transports); static DEFINE_MUTEX(fcoe_transports_lock); /** - * fcoe_transport_default - returns ptr to the default transport fcoe_sw - **/ + * fcoe_transport_default() - Returns ptr to the default transport fcoe_sw + */ struct fcoe_transport *fcoe_transport_default(void) { return &fcoe_sw_transport; } /** - * fcoe_transport_to_pcidev - get the pci dev from a netdev + * fcoe_transport_to_pcidev() - get the pci dev from a netdev * @netdev: the netdev that pci dev will be retrived from * * Returns: NULL or the corrsponding pci_dev - **/ + */ struct pci_dev *fcoe_transport_pcidev(const struct net_device *netdev) { if (!netdev->dev.parent) @@ -54,16 +54,14 @@ struct pci_dev *fcoe_transport_pcidev(const struct net_device *netdev) } /** - * fcoe_transport_device_lookup - find out netdev is managed by the - * transport - * assign a transport to a device + * fcoe_transport_device_lookup() - Lookup a transport * @netdev: the netdev the transport to be attached to * * This will look for existing offload driver, if not found, it falls back to * the default sw hba (fcoe_sw) as its fcoe transport. * * Returns: 0 for success - **/ + */ static struct fcoe_transport_internal *fcoe_transport_device_lookup( struct fcoe_transport *t, struct net_device *netdev) { @@ -81,14 +79,14 @@ static struct fcoe_transport_internal *fcoe_transport_device_lookup( return NULL; } /** - * fcoe_transport_device_add - assign a transport to a device + * fcoe_transport_device_add() - Assign a transport to a device * @netdev: the netdev the transport to be attached to * * This will look for existing offload driver, if not found, it falls back to * the default sw hba (fcoe_sw) as its fcoe transport. * * Returns: 0 for success - **/ + */ static int fcoe_transport_device_add(struct fcoe_transport *t, struct net_device *netdev) { @@ -123,14 +121,14 @@ static int fcoe_transport_device_add(struct fcoe_transport *t, } /** - * fcoe_transport_device_remove - remove a device from its transport + * fcoe_transport_device_remove() - Remove a device from its transport * @netdev: the netdev the transport to be attached to * - * this removes the device from the transport so the given transport will + * This removes the device from the transport so the given transport will * not manage this device any more * * Returns: 0 for success - **/ + */ static int fcoe_transport_device_remove(struct fcoe_transport *t, struct net_device *netdev) { @@ -155,13 +153,13 @@ static int fcoe_transport_device_remove(struct fcoe_transport *t, } /** - * fcoe_transport_device_remove_all - remove all from transport devlist + * fcoe_transport_device_remove_all() - Remove all from transport devlist * - * this removes the device from the transport so the given transport will + * This removes the device from the transport so the given transport will * not manage this device any more * * Returns: 0 for success - **/ + */ static void fcoe_transport_device_remove_all(struct fcoe_transport *t) { struct fcoe_transport_internal *ti, *tmp; @@ -175,16 +173,16 @@ static void fcoe_transport_device_remove_all(struct fcoe_transport *t) } /** - * fcoe_transport_match - use the bus device match function to match the hw - * @t: the fcoe transport - * @netdev: + * fcoe_transport_match() - Use the bus device match function to match the hw + * @t: The fcoe transport to check + * @netdev: The netdev to match against * - * This function is used to check if the givne transport wants to manage the + * This function is used to check if the given transport wants to manage the * input netdev. if the transports implements the match function, it will be * called, o.w. we just compare the pci vendor and device id. * * Returns: true for match up - **/ + */ static bool fcoe_transport_match(struct fcoe_transport *t, struct net_device *netdev) { @@ -210,15 +208,15 @@ static bool fcoe_transport_match(struct fcoe_transport *t, } /** - * fcoe_transport_lookup - check if the transport is already registered + * fcoe_transport_lookup() - Check if the transport is already registered * @t: the transport to be looked up * * This compares the parent device (pci) vendor and device id * * Returns: NULL if not found * - * TODO - return default sw transport if no other transport is found - **/ + * TODO: return default sw transport if no other transport is found + */ static struct fcoe_transport *fcoe_transport_lookup( struct net_device *netdev) { @@ -239,11 +237,11 @@ static struct fcoe_transport *fcoe_transport_lookup( } /** - * fcoe_transport_register - adds a fcoe transport to the fcoe transports list + * fcoe_transport_register() - Adds a fcoe transport to the fcoe transports list * @t: ptr to the fcoe transport to be added * * Returns: 0 for success - **/ + */ int fcoe_transport_register(struct fcoe_transport *t) { struct fcoe_transport *tt; @@ -269,11 +267,11 @@ int fcoe_transport_register(struct fcoe_transport *t) EXPORT_SYMBOL_GPL(fcoe_transport_register); /** - * fcoe_transport_unregister - remove the tranport fro the fcoe transports list + * fcoe_transport_unregister() - Remove the tranport fro the fcoe transports list * @t: ptr to the fcoe transport to be removed * * Returns: 0 for success - **/ + */ int fcoe_transport_unregister(struct fcoe_transport *t) { struct fcoe_transport *tt, *tmp; @@ -294,8 +292,8 @@ int fcoe_transport_unregister(struct fcoe_transport *t) } EXPORT_SYMBOL_GPL(fcoe_transport_unregister); -/* - * fcoe_load_transport_driver - load an offload driver by alias name +/** + * fcoe_load_transport_driver() - Load an offload driver by alias name * @netdev: the target net device * * Requests for an offload driver module as the fcoe transport, if fails, it @@ -307,7 +305,7 @@ EXPORT_SYMBOL_GPL(fcoe_transport_unregister); * 3. pure hw fcoe hba may not have netdev * * Returns: 0 for success - **/ + */ int fcoe_load_transport_driver(struct net_device *netdev) { struct pci_dev *pci; @@ -335,14 +333,14 @@ int fcoe_load_transport_driver(struct net_device *netdev) EXPORT_SYMBOL_GPL(fcoe_load_transport_driver); /** - * fcoe_transport_attach - load transport to fcoe + * fcoe_transport_attach() - Load transport to fcoe * @netdev: the netdev the transport to be attached to * * This will look for existing offload driver, if not found, it falls back to * the default sw hba (fcoe_sw) as its fcoe transport. * * Returns: 0 for success - **/ + */ int fcoe_transport_attach(struct net_device *netdev) { struct fcoe_transport *t; @@ -373,11 +371,11 @@ int fcoe_transport_attach(struct net_device *netdev) EXPORT_SYMBOL_GPL(fcoe_transport_attach); /** - * fcoe_transport_release - unload transport from fcoe + * fcoe_transport_release() - Unload transport from fcoe * @netdev: the net device on which fcoe is to be released * * Returns: 0 for success - **/ + */ int fcoe_transport_release(struct net_device *netdev) { struct fcoe_transport *t; @@ -410,12 +408,12 @@ int fcoe_transport_release(struct net_device *netdev) EXPORT_SYMBOL_GPL(fcoe_transport_release); /** - * fcoe_transport_init - initializes fcoe transport layer + * fcoe_transport_init() - Initializes fcoe transport layer * * This prepares for the fcoe transport layer * * Returns: none - **/ + */ int __init fcoe_transport_init(void) { INIT_LIST_HEAD(&fcoe_transports); @@ -424,12 +422,13 @@ int __init fcoe_transport_init(void) } /** - * fcoe_transport_exit - cleans up the fcoe transport layer + * fcoe_transport_exit() - Cleans up the fcoe transport layer + * * This cleans up the fcoe transport layer. removing any transport on the list, * note that the transport destroy func is not called here. * * Returns: none - **/ + */ int __exit fcoe_transport_exit(void) { struct fcoe_transport *t, *tmp; diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index cf83675a0fb9..007d1fbae808 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -104,13 +104,12 @@ static struct scsi_host_template fcoe_sw_shost_template = { .max_sectors = 0xffff, }; -/* - * fcoe_sw_lport_config - sets up the fc_lport +/** + * fcoe_sw_lport_config() - sets up the fc_lport * @lp: ptr to the fc_lport * @shost: ptr to the parent scsi host * * Returns: 0 for success - * */ static int fcoe_sw_lport_config(struct fc_lport *lp) { @@ -137,16 +136,14 @@ static int fcoe_sw_lport_config(struct fc_lport *lp) return 0; } -/* - * fcoe_sw_netdev_config - sets up fcoe_softc for lport and network - * related properties +/** + * fcoe_sw_netdev_config() - Set up netdev for SW FCoE * @lp : ptr to the fc_lport * @netdev : ptr to the associated netdevice struct * * Must be called after fcoe_sw_lport_config() as it will use lport mutex * * Returns : 0 for success - * */ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev) { @@ -224,16 +221,15 @@ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev) return 0; } -/* - * fcoe_sw_shost_config - sets up fc_lport->host +/** + * fcoe_sw_shost_config() - Sets up fc_lport->host * @lp : ptr to the fc_lport * @shost : ptr to the associated scsi host * @dev : device associated to scsi host * - * Must be called after fcoe_sw_lport_config) and fcoe_sw_netdev_config() + * Must be called after fcoe_sw_lport_config() and fcoe_sw_netdev_config() * * Returns : 0 for success - * */ static int fcoe_sw_shost_config(struct fc_lport *lp, struct Scsi_Host *shost, struct device *dev) @@ -261,8 +257,8 @@ static int fcoe_sw_shost_config(struct fc_lport *lp, struct Scsi_Host *shost, return 0; } -/* - * fcoe_sw_em_config - allocates em for this lport +/** + * fcoe_sw_em_config() - allocates em for this lport * @lp: the port that em is to allocated for * * Returns : 0 on success @@ -279,8 +275,8 @@ static inline int fcoe_sw_em_config(struct fc_lport *lp) return 0; } -/* - * fcoe_sw_destroy - FCoE software HBA tear-down function +/** + * fcoe_sw_destroy() - FCoE software HBA tear-down function * @netdev: ptr to the associated net_device * * Returns: 0 if link is OK for use by FCoE. @@ -353,8 +349,8 @@ static struct libfc_function_template fcoe_sw_libfc_fcn_templ = { .frame_send = fcoe_xmit, }; -/* - * fcoe_sw_create - this function creates the fcoe interface +/** + * fcoe_sw_create() - this function creates the fcoe interface * @netdev: pointer the associated netdevice * * Creates fc_lport struct and scsi_host for lport, configures lport @@ -440,8 +436,8 @@ out_host_put: return rc; } -/* - * fcoe_sw_match - the fcoe sw transport match function +/** + * fcoe_sw_match() - The FCoE SW transport match function * * Returns : false always */ @@ -461,8 +457,8 @@ struct fcoe_transport fcoe_sw_transport = { .device = 0xffff, }; -/* - * fcoe_sw_init - registers fcoe_sw_transport +/** + * fcoe_sw_init() - Registers fcoe_sw_transport * * Returns : 0 on success */ @@ -480,8 +476,8 @@ int __init fcoe_sw_init(void) return 0; } -/* - * fcoe_sw_exit - unregisters fcoe_sw_transport +/** + * fcoe_sw_exit() - Unregisters fcoe_sw_transport * * Returns : 0 on success */ diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 296071043f55..5e68652985b2 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -91,13 +91,13 @@ static struct notifier_block fcoe_cpu_notifier = { }; /** - * fcoe_create_percpu_data - creates the associated cpu data + * fcoe_create_percpu_data() - creates the associated cpu data * @cpu: index for the cpu where fcoe cpu data will be created * * create percpu stats block, from cpu add notifier * * Returns: none - **/ + */ static void fcoe_create_percpu_data(int cpu) { struct fc_lport *lp; @@ -115,13 +115,13 @@ static void fcoe_create_percpu_data(int cpu) } /** - * fcoe_destroy_percpu_data - destroys the associated cpu data + * fcoe_destroy_percpu_data() - destroys the associated cpu data * @cpu: index for the cpu where fcoe cpu data will destroyed * * destroy percpu stats block called by cpu add/remove notifier * * Retuns: none - **/ + */ static void fcoe_destroy_percpu_data(int cpu) { struct fc_lport *lp; @@ -137,7 +137,7 @@ static void fcoe_destroy_percpu_data(int cpu) } /** - * fcoe_cpu_callback - fcoe cpu hotplug event callback + * fcoe_cpu_callback() - fcoe cpu hotplug event callback * @nfb: callback data block * @action: event triggering the callback * @hcpu: index for the cpu of this event @@ -145,7 +145,7 @@ static void fcoe_destroy_percpu_data(int cpu) * this creates or destroys per cpu data for fcoe * * Returns NOTIFY_OK always. - **/ + */ static int fcoe_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { @@ -166,7 +166,7 @@ static int fcoe_cpu_callback(struct notifier_block *nfb, unsigned long action, #endif /* CONFIG_HOTPLUG_CPU */ /** - * fcoe_rcv - this is the fcoe receive function called by NET_RX_SOFTIRQ + * fcoe_rcv() - this is the fcoe receive function called by NET_RX_SOFTIRQ * @skb: the receive skb * @dev: associated net device * @ptype: context @@ -175,7 +175,7 @@ static int fcoe_cpu_callback(struct notifier_block *nfb, unsigned long action, * this function will receive the packet and build fc frame and pass it up * * Returns: 0 for success - **/ + */ int fcoe_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype, struct net_device *olddev) { @@ -265,11 +265,11 @@ err2: EXPORT_SYMBOL_GPL(fcoe_rcv); /** - * fcoe_start_io - pass to netdev to start xmit for fcoe + * fcoe_start_io() - pass to netdev to start xmit for fcoe * @skb: the skb to be xmitted * * Returns: 0 for success - **/ + */ static inline int fcoe_start_io(struct sk_buff *skb) { int rc; @@ -283,12 +283,12 @@ static inline int fcoe_start_io(struct sk_buff *skb) } /** - * fcoe_get_paged_crc_eof - in case we need alloc a page for crc_eof + * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof * @skb: the skb to be xmitted * @tlen: total len * * Returns: 0 for success - **/ + */ static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen) { struct fcoe_percpu_s *fps; @@ -326,13 +326,12 @@ static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen) } /** - * fcoe_fc_crc - calculates FC CRC in this fcoe skb + * fcoe_fc_crc() - calculates FC CRC in this fcoe skb * @fp: the fc_frame containg data to be checksummed * * This uses crc32() to calculate the crc for fc frame * Return : 32 bit crc - * - **/ + */ u32 fcoe_fc_crc(struct fc_frame *fp) { struct sk_buff *skb = fp_skb(fp); @@ -363,13 +362,12 @@ u32 fcoe_fc_crc(struct fc_frame *fp) EXPORT_SYMBOL_GPL(fcoe_fc_crc); /** - * fcoe_xmit - FCoE frame transmit function + * fcoe_xmit() - FCoE frame transmit function * @lp: the associated local port * @fp: the fc_frame to be transmitted * * Return : 0 for success - * - **/ + */ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) { int wlen, rc = 0; @@ -511,12 +509,11 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) } EXPORT_SYMBOL_GPL(fcoe_xmit); -/* - * fcoe_percpu_receive_thread - recv thread per cpu +/** + * fcoe_percpu_receive_thread() - recv thread per cpu * @arg: ptr to the fcoe per cpu struct * * Return: 0 for success - * */ int fcoe_percpu_receive_thread(void *arg) { @@ -658,7 +655,7 @@ int fcoe_percpu_receive_thread(void *arg) } /** - * fcoe_recv_flogi - flogi receive function + * fcoe_recv_flogi() - flogi receive function * @fc: associated fcoe_softc * @fp: the recieved frame * @sa: the source address of this flogi @@ -667,7 +664,7 @@ int fcoe_percpu_receive_thread(void *arg) * mac address for the initiator, eitehr OUI based or GW based. * * Returns: none - **/ + */ static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa) { struct fc_frame_header *fh; @@ -715,7 +712,7 @@ static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa) } /** - * fcoe_watchdog - fcoe timer callback + * fcoe_watchdog() - fcoe timer callback * @vp: * * This checks the pending queue length for fcoe and set lport qfull @@ -723,7 +720,7 @@ static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa) * fcoe_hostlist. * * Returns: 0 for success - **/ + */ void fcoe_watchdog(ulong vp) { struct fc_lport *lp; @@ -750,7 +747,7 @@ void fcoe_watchdog(ulong vp) /** - * fcoe_check_wait_queue - put the skb into fcoe pending xmit queue + * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue * @lp: the fc_port for this skb * @skb: the associated skb to be xmitted * @@ -764,7 +761,7 @@ void fcoe_watchdog(ulong vp) * by the next skb transmit. * * Returns: 0 for success - **/ + */ static int fcoe_check_wait_queue(struct fc_lport *lp) { int rc; @@ -797,12 +794,12 @@ static int fcoe_check_wait_queue(struct fc_lport *lp) } /** - * fcoe_insert_wait_queue_head - puts skb to fcoe pending queue head + * fcoe_insert_wait_queue_head() - puts skb to fcoe pending queue head * @lp: the fc_port for this skb * @skb: the associated skb to be xmitted * * Returns: none - **/ + */ static void fcoe_insert_wait_queue_head(struct fc_lport *lp, struct sk_buff *skb) { @@ -815,12 +812,12 @@ static void fcoe_insert_wait_queue_head(struct fc_lport *lp, } /** - * fcoe_insert_wait_queue - put the skb into fcoe pending queue tail + * fcoe_insert_wait_queue() - put the skb into fcoe pending queue tail * @lp: the fc_port for this skb * @skb: the associated skb to be xmitted * * Returns: none - **/ + */ static void fcoe_insert_wait_queue(struct fc_lport *lp, struct sk_buff *skb) { @@ -833,10 +830,9 @@ static void fcoe_insert_wait_queue(struct fc_lport *lp, } /** - * fcoe_dev_setup - setup link change notification interface - * - **/ -static void fcoe_dev_setup(void) + * fcoe_dev_setup() - setup link change notification interface + */ +static void fcoe_dev_setup() { /* * here setup a interface specific wd time to @@ -846,15 +842,15 @@ static void fcoe_dev_setup(void) } /** - * fcoe_dev_setup - cleanup link change notification interface - **/ + * fcoe_dev_setup() - cleanup link change notification interface + */ static void fcoe_dev_cleanup(void) { unregister_netdevice_notifier(&fcoe_notifier); } /** - * fcoe_device_notification - netdev event notification callback + * fcoe_device_notification() - netdev event notification callback * @notifier: context of the notification * @event: type of event * @ptr: fixed array for output parsed ifname @@ -862,7 +858,7 @@ static void fcoe_dev_cleanup(void) * This function is called by the ethernet driver in case of link change event * * Returns: 0 for success - **/ + */ static int fcoe_device_notification(struct notifier_block *notifier, ulong event, void *ptr) { @@ -926,12 +922,12 @@ out: } /** - * fcoe_if_to_netdev - parse a name buffer to get netdev + * fcoe_if_to_netdev() - parse a name buffer to get netdev * @ifname: fixed array for output parsed ifname * @buffer: incoming buffer to be copied * * Returns: NULL or ptr to netdeive - **/ + */ static struct net_device *fcoe_if_to_netdev(const char *buffer) { char *cp; @@ -948,11 +944,11 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer) } /** - * fcoe_netdev_to_module_owner - finds out the nic drive moddule of the netdev + * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev * @netdev: the target netdev * * Returns: ptr to the struct module, NULL for failure - **/ + */ static struct module *fcoe_netdev_to_module_owner( const struct net_device *netdev) { @@ -972,12 +968,14 @@ static struct module *fcoe_netdev_to_module_owner( } /** - * fcoe_ethdrv_get - holds the nic driver module by try_module_get() for - * the corresponding netdev. + * fcoe_ethdrv_get() - Hold the Ethernet driver * @netdev: the target netdev * + * Holds the Ethernet driver module by try_module_get() for + * the corresponding netdev. + * * Returns: 0 for succsss - **/ + */ static int fcoe_ethdrv_get(const struct net_device *netdev) { struct module *owner; @@ -992,12 +990,14 @@ static int fcoe_ethdrv_get(const struct net_device *netdev) } /** - * fcoe_ethdrv_get - releases the nic driver module by module_put for - * the corresponding netdev. + * fcoe_ethdrv_put() - Release the Ethernet driver * @netdev: the target netdev * + * Releases the Ethernet driver module by module_put for + * the corresponding netdev. + * * Returns: 0 for succsss - **/ + */ static int fcoe_ethdrv_put(const struct net_device *netdev) { struct module *owner; @@ -1013,12 +1013,12 @@ static int fcoe_ethdrv_put(const struct net_device *netdev) } /** - * fcoe_destroy- handles the destroy from sysfs + * fcoe_destroy() - handles the destroy from sysfs * @buffer: expcted to be a eth if name * @kp: associated kernel param * * Returns: 0 for success - **/ + */ static int fcoe_destroy(const char *buffer, struct kernel_param *kp) { int rc; @@ -1051,12 +1051,12 @@ out_nodev: } /** - * fcoe_create - handles the create call from sysfs + * fcoe_create() - Handles the create call from sysfs * @buffer: expcted to be a eth if name * @kp: associated kernel param * * Returns: 0 for success - **/ + */ static int fcoe_create(const char *buffer, struct kernel_param *kp) { int rc; @@ -1097,8 +1097,8 @@ module_param_call(destroy, fcoe_destroy, NULL, NULL, S_IWUSR); __MODULE_PARM_TYPE(destroy, "string"); MODULE_PARM_DESC(destroy, "Destroy fcoe port"); -/* - * fcoe_link_ok - check if link is ok for the fc_lport +/** + * fcoe_link_ok() - Check if link is ok for the fc_lport * @lp: ptr to the fc_lport * * Any permanently-disqualifying conditions have been previously checked. @@ -1142,9 +1142,8 @@ int fcoe_link_ok(struct fc_lport *lp) } EXPORT_SYMBOL_GPL(fcoe_link_ok); -/* - * fcoe_percpu_clean - frees skb of the corresponding lport from the per - * cpu queue. +/** + * fcoe_percpu_clean() - Clear the pending skbs for an lport * @lp: the fc_lport */ void fcoe_percpu_clean(struct fc_lport *lp) @@ -1178,11 +1177,11 @@ void fcoe_percpu_clean(struct fc_lport *lp) EXPORT_SYMBOL_GPL(fcoe_percpu_clean); /** - * fcoe_clean_pending_queue - dequeue skb and free it + * fcoe_clean_pending_queue() - Dequeue a skb and free it * @lp: the corresponding fc_lport * * Returns: none - **/ + */ void fcoe_clean_pending_queue(struct fc_lport *lp) { struct fcoe_softc *fc = lport_priv(lp); @@ -1199,12 +1198,12 @@ void fcoe_clean_pending_queue(struct fc_lport *lp) EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue); /** - * libfc_host_alloc - allocate a Scsi_Host with room for the fc_lport + * libfc_host_alloc() - Allocate a Scsi_Host with room for the fc_lport * @sht: ptr to the scsi host templ * @priv_size: size of private data after fc_lport * * Returns: ptr to Scsi_Host - * TODO - to libfc? + * TODO: to libfc? */ static inline struct Scsi_Host *libfc_host_alloc( struct scsi_host_template *sht, int priv_size) @@ -1213,7 +1212,7 @@ static inline struct Scsi_Host *libfc_host_alloc( } /** - * fcoe_host_alloc - allocate a Scsi_Host with room for the fcoe_softc + * fcoe_host_alloc() - Allocate a Scsi_Host with room for the fcoe_softc * @sht: ptr to the scsi host templ * @priv_size: size of private data after fc_lport * @@ -1225,8 +1224,8 @@ struct Scsi_Host *fcoe_host_alloc(struct scsi_host_template *sht, int priv_size) } EXPORT_SYMBOL_GPL(fcoe_host_alloc); -/* - * fcoe_reset - resets the fcoe +/** + * fcoe_reset() - Resets the fcoe * @shost: shost the reset is from * * Returns: always 0 @@ -1239,8 +1238,8 @@ int fcoe_reset(struct Scsi_Host *shost) } EXPORT_SYMBOL_GPL(fcoe_reset); -/* - * fcoe_wwn_from_mac - converts 48-bit IEEE MAC address to 64-bit FC WWN. +/** + * fcoe_wwn_from_mac() - Converts 48-bit IEEE MAC address to 64-bit FC WWN. * @mac: mac address * @scheme: check port * @port: port indicator for converting @@ -1279,8 +1278,9 @@ u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], return wwn; } EXPORT_SYMBOL_GPL(fcoe_wwn_from_mac); -/* - * fcoe_hostlist_lookup_softc - find the corresponding lport by a given device + +/** + * fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device * @device: this is currently ptr to net_device * * Returns: NULL or the located fcoe_softc @@ -1301,8 +1301,8 @@ static struct fcoe_softc *fcoe_hostlist_lookup_softc( return NULL; } -/* - * fcoe_hostlist_lookup - find the corresponding lport by netdev +/** + * fcoe_hostlist_lookup() - Find the corresponding lport by netdev * @netdev: ptr to net_device * * Returns: 0 for success @@ -1317,8 +1317,8 @@ struct fc_lport *fcoe_hostlist_lookup(const struct net_device *netdev) } EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup); -/* - * fcoe_hostlist_add - add a lport to lports list +/** + * fcoe_hostlist_add() - Add a lport to lports list * @lp: ptr to the fc_lport to badded * * Returns: 0 for success @@ -1338,8 +1338,8 @@ int fcoe_hostlist_add(const struct fc_lport *lp) } EXPORT_SYMBOL_GPL(fcoe_hostlist_add); -/* - * fcoe_hostlist_remove - remove a lport from lports list +/** + * fcoe_hostlist_remove() - remove a lport from lports list * @lp: ptr to the fc_lport to badded * * Returns: 0 for success @@ -1359,12 +1359,12 @@ int fcoe_hostlist_remove(const struct fc_lport *lp) EXPORT_SYMBOL_GPL(fcoe_hostlist_remove); /** - * fcoe_libfc_config - sets up libfc related properties for lport + * fcoe_libfc_config() - sets up libfc related properties for lport * @lp: ptr to the fc_lport * @tt: libfc function template * * Returns : 0 for success - **/ + */ int fcoe_libfc_config(struct fc_lport *lp, struct libfc_function_template *tt) { /* Set the function pointers set by the LLDD */ @@ -1382,14 +1382,14 @@ int fcoe_libfc_config(struct fc_lport *lp, struct libfc_function_template *tt) EXPORT_SYMBOL_GPL(fcoe_libfc_config); /** - * fcoe_init - fcoe module loading initialization + * fcoe_init() - fcoe module loading initialization * * Initialization routine * 1. Will create fc transport software structure * 2. initialize the link list of port information structure * * Returns 0 on success, negative on failure - **/ + */ static int __init fcoe_init(void) { int cpu; @@ -1452,10 +1452,10 @@ static int __init fcoe_init(void) module_init(fcoe_init); /** - * fcoe_exit - fcoe module unloading cleanup + * fcoe_exit() - fcoe module unloading cleanup * * Returns 0 on success, negative on failure - **/ + */ static void __exit fcoe_exit(void) { u32 idx; diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index cfbce893941a..e57556ea5b48 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -64,7 +64,7 @@ static void fc_disc_single(struct fc_disc *, struct fc_disc_port *); static void fc_disc_restart(struct fc_disc *); /** - * fc_disc_lookup_rport - lookup a remote port by port_id + * fc_disc_lookup_rport() - lookup a remote port by port_id * @lport: Fibre Channel host port instance * @port_id: remote port port_id to match */ @@ -92,7 +92,7 @@ struct fc_rport *fc_disc_lookup_rport(const struct fc_lport *lport, } /** - * fc_disc_stop_rports - delete all the remote ports associated with the lport + * fc_disc_stop_rports() - delete all the remote ports associated with the lport * @disc: The discovery job to stop rports on * * Locking Note: This function expects that the lport mutex is locked before @@ -117,7 +117,7 @@ void fc_disc_stop_rports(struct fc_disc *disc) } /** - * fc_disc_rport_callback - Event handler for rport events + * fc_disc_rport_callback() - Event handler for rport events * @lport: The lport which is receiving the event * @rport: The rport which the event has occured on * @event: The event that occured @@ -151,7 +151,7 @@ static void fc_disc_rport_callback(struct fc_lport *lport, } /** - * fc_disc_recv_rscn_req - Handle Registered State Change Notification (RSCN) + * fc_disc_recv_rscn_req() - Handle Registered State Change Notification (RSCN) * @sp: Current sequence of the RSCN exchange * @fp: RSCN Frame * @lport: Fibre Channel host port instance @@ -265,7 +265,7 @@ reject: } /** - * fc_disc_recv_req - Handle incoming requests + * fc_disc_recv_req() - Handle incoming requests * @sp: Current sequence of the request exchange * @fp: The frame * @lport: The FC local port @@ -294,7 +294,7 @@ static void fc_disc_recv_req(struct fc_seq *sp, struct fc_frame *fp, } /** - * fc_disc_restart - Restart discovery + * fc_disc_restart() - Restart discovery * @lport: FC discovery context * * Locking Note: This function expects that the disc mutex @@ -322,7 +322,7 @@ static void fc_disc_restart(struct fc_disc *disc) } /** - * fc_disc_start - Fibre Channel Target discovery + * fc_disc_start() - Fibre Channel Target discovery * @lport: FC local port * * Returns non-zero if discovery cannot be started. @@ -383,7 +383,7 @@ static struct fc_rport_operations fc_disc_rport_ops = { }; /** - * fc_disc_new_target - Handle new target found by discovery + * fc_disc_new_target() - Handle new target found by discovery * @lport: FC local port * @rport: The previous FC remote port (NULL if new remote port) * @ids: Identifiers for the new FC remote port @@ -446,7 +446,7 @@ static int fc_disc_new_target(struct fc_disc *disc, } /** - * fc_disc_del_target - Delete a target + * fc_disc_del_target() - Delete a target * @disc: FC discovery context * @rport: The remote port to be removed */ @@ -459,7 +459,7 @@ static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport) } /** - * fc_disc_done - Discovery has been completed + * fc_disc_done() - Discovery has been completed * @disc: FC discovery context */ static void fc_disc_done(struct fc_disc *disc) @@ -479,7 +479,7 @@ static void fc_disc_done(struct fc_disc *disc) } /** - * fc_disc_error - Handle error on dNS request + * fc_disc_error() - Handle error on dNS request * @disc: FC discovery context * @fp: The frame pointer */ @@ -519,7 +519,7 @@ static void fc_disc_error(struct fc_disc *disc, struct fc_frame *fp) } /** - * fc_disc_gpn_ft_req - Send Get Port Names by FC-4 type (GPN_FT) request + * fc_disc_gpn_ft_req() - Send Get Port Names by FC-4 type (GPN_FT) request * @lport: FC discovery context * * Locking Note: This function expects that the disc_mutex is locked @@ -553,7 +553,7 @@ err: } /** - * fc_disc_gpn_ft_parse - Parse the list of IDs and names resulting from a request + * fc_disc_gpn_ft_parse() - Parse the list of IDs and names resulting from a request * @lport: Fibre Channel host port instance * @buf: GPN_FT response buffer * @len: size of response buffer @@ -658,7 +658,10 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len) return error; } -/* +/** + * fc_disc_timeout() - Retry handler for the disc component + * @work: Structure holding disc obj that needs retry discovery + * * Handle retry of memory allocation for remote ports. */ static void fc_disc_timeout(struct work_struct *work) @@ -673,7 +676,7 @@ static void fc_disc_timeout(struct work_struct *work) } /** - * fc_disc_gpn_ft_resp - Handle a response frame from Get Port Names (GPN_FT) + * fc_disc_gpn_ft_resp() - Handle a response frame from Get Port Names (GPN_FT) * @sp: Current sequence of GPN_FT exchange * @fp: response frame * @lp_arg: Fibre Channel host port instance @@ -712,9 +715,7 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, fr_len(fp)); } else if (ntohs(cp->ct_cmd) == FC_FS_ACC) { - /* - * Accepted. Parse response. - */ + /* Accepted, parse the response. */ buf = cp + 1; len -= sizeof(*cp); } else if (ntohs(cp->ct_cmd) == FC_FS_RJT) { @@ -746,7 +747,7 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, } /** - * fc_disc_single - Discover the directory information for a single target + * fc_disc_single() - Discover the directory information for a single target * @lport: FC local port * @dp: The port to rediscover * @@ -782,7 +783,7 @@ out: } /** - * fc_disc_stop - Stop discovery for a given lport + * fc_disc_stop() - Stop discovery for a given lport * @lport: The lport that discovery should stop for */ void fc_disc_stop(struct fc_lport *lport) @@ -796,7 +797,7 @@ void fc_disc_stop(struct fc_lport *lport) } /** - * fc_disc_stop_final - Stop discovery for a given lport + * fc_disc_stop_final() - Stop discovery for a given lport * @lport: The lport that discovery should stop for * * This function will block until discovery has been @@ -809,7 +810,7 @@ void fc_disc_stop_final(struct fc_lport *lport) } /** - * fc_disc_init - Initialize the discovery block + * fc_disc_init() - Initialize the discovery block * @lport: FC local port */ int fc_disc_init(struct fc_lport *lport) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index ecc72612c385..2a631d7dbcec 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -161,7 +161,7 @@ static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lp, gfp_t gfp) } /** - * fc_fcp_pkt_release - release hold on scsi_pkt packet + * fc_fcp_pkt_release() - release hold on scsi_pkt packet * @fsp: fcp packet struct * * This is used by upper layer scsi driver. @@ -183,8 +183,7 @@ static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp) } /** - * fc_fcp_pkt_destory - release hold on scsi_pkt packet - * + * fc_fcp_pkt_destory() - release hold on scsi_pkt packet * @seq: exchange sequence * @fsp: fcp packet struct * @@ -199,7 +198,7 @@ static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp) } /** - * fc_fcp_lock_pkt - lock a packet and get a ref to it. + * fc_fcp_lock_pkt() - lock a packet and get a ref to it. * @fsp: fcp packet * * We should only return error if we return a command to scsi-ml before @@ -291,9 +290,7 @@ static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp) buf = fc_frame_payload_get(fp, 0); if (offset + len > fsp->data_len) { - /* - * this should never happen - */ + /* this should never happen */ if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) && fc_frame_crc_check(fp)) goto crc_err; @@ -387,8 +384,8 @@ crc_err: fc_fcp_complete_locked(fsp); } -/* - * fc_fcp_send_data - Send SCSI data to target. +/** + * fc_fcp_send_data() - Send SCSI data to target. * @fsp: ptr to fc_fcp_pkt * @sp: ptr to this sequence * @offset: starting offset for this data request @@ -610,8 +607,8 @@ static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) } } -/* - * fc_fcp_reduce_can_queue - drop can_queue +/** + * fc_fcp_reduce_can_queue() - drop can_queue * @lp: lport to drop queueing for * * If we are getting memory allocation failures, then we may @@ -642,9 +639,11 @@ done: spin_unlock_irqrestore(lp->host->host_lock, flags); } -/* - * exch mgr calls this routine to process scsi - * exchanges. +/** + * fc_fcp_recv() - Reveive FCP frames + * @seq: The sequence the frame is on + * @fp: The FC frame + * @arg: The related FCP packet * * Return : None * Context : called from Soft IRQ context @@ -832,7 +831,7 @@ err: } /** - * fc_fcp_complete_locked - complete processing of a fcp packet + * fc_fcp_complete_locked() - complete processing of a fcp packet * @fsp: fcp packet * * This function may sleep if a timer is pending. The packet lock must be @@ -900,7 +899,7 @@ static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error) } /** - * fc_fcp_cleanup_each_cmd - run fn on each active command + * fc_fcp_cleanup_each_cmd() - Cleanup active commads * @lp: logical port * @id: target id * @lun: lun @@ -952,7 +951,7 @@ static void fc_fcp_abort_io(struct fc_lport *lp) } /** - * fc_fcp_pkt_send - send a fcp packet to the lower level. + * fc_fcp_pkt_send() - send a fcp packet to the lower level. * @lp: fc lport * @fsp: fc packet. * @@ -1727,7 +1726,7 @@ out: EXPORT_SYMBOL(fc_queuecommand); /** - * fc_io_compl - Handle responses for completed commands + * fc_io_compl() - Handle responses for completed commands * @fsp: scsi packet * * Translates a error to a Linux SCSI error. @@ -1857,7 +1856,7 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) } /** - * fc_fcp_complete - complete processing of a fcp packet + * fc_fcp_complete() - complete processing of a fcp packet * @fsp: fcp packet * * This function may sleep if a fsp timer is pending. @@ -1874,9 +1873,10 @@ void fc_fcp_complete(struct fc_fcp_pkt *fsp) EXPORT_SYMBOL(fc_fcp_complete); /** - * fc_eh_abort - Abort a command...from scsi host template + * fc_eh_abort() - Abort a command * @sc_cmd: scsi command to abort * + * From scsi host template. * send ABTS to the target device and wait for the response * sc_cmd is the pointer to the command to be aborted. */ @@ -1920,7 +1920,7 @@ release_pkt: EXPORT_SYMBOL(fc_eh_abort); /** - * fc_eh_device_reset: Reset a single LUN + * fc_eh_device_reset() Reset a single LUN * @sc_cmd: scsi command * * Set from scsi host template to send tm cmd to the target and wait for the @@ -1973,7 +1973,7 @@ out: EXPORT_SYMBOL(fc_eh_device_reset); /** - * fc_eh_host_reset - The reset function will reset the ports on the host. + * fc_eh_host_reset() - The reset function will reset the ports on the host. * @sc_cmd: scsi command */ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd) @@ -1999,7 +1999,7 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd) EXPORT_SYMBOL(fc_eh_host_reset); /** - * fc_slave_alloc - configure queue depth + * fc_slave_alloc() - configure queue depth * @sdev: scsi device * * Configures queue depth based on host's cmd_per_len. If not set diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index c00de2244c78..2ae50a1188e6 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -139,7 +139,7 @@ static int fc_frame_drop(struct fc_lport *lport, struct fc_frame *fp) } /** - * fc_lport_rport_callback - Event handler for rport events + * fc_lport_rport_callback() - Event handler for rport events * @lport: The lport which is receiving the event * @rport: The rport which the event has occured on * @event: The event that occured @@ -195,7 +195,7 @@ static void fc_lport_rport_callback(struct fc_lport *lport, } /** - * fc_lport_state - Return a string which represents the lport's state + * fc_lport_state() - Return a string which represents the lport's state * @lport: The lport whose state is to converted to a string */ static const char *fc_lport_state(struct fc_lport *lport) @@ -209,7 +209,7 @@ static const char *fc_lport_state(struct fc_lport *lport) } /** - * fc_lport_ptp_setup - Create an rport for point-to-point mode + * fc_lport_ptp_setup() - Create an rport for point-to-point mode * @lport: The lport to attach the ptp rport to * @fid: The FID of the ptp rport * @remote_wwpn: The WWPN of the ptp rport @@ -351,7 +351,7 @@ static void fc_lport_add_fc4_type(struct fc_lport *lport, enum fc_fh_type type) } /** - * fc_lport_recv_rlir_req - Handle received Registered Link Incident Report. + * fc_lport_recv_rlir_req() - Handle received Registered Link Incident Report. * @lport: Fibre Channel local port recieving the RLIR * @sp: current sequence in the RLIR exchange * @fp: RLIR request frame @@ -370,7 +370,7 @@ static void fc_lport_recv_rlir_req(struct fc_seq *sp, struct fc_frame *fp, } /** - * fc_lport_recv_echo_req - Handle received ECHO request + * fc_lport_recv_echo_req() - Handle received ECHO request * @lport: Fibre Channel local port recieving the ECHO * @sp: current sequence in the ECHO exchange * @fp: ECHO request frame @@ -412,7 +412,7 @@ static void fc_lport_recv_echo_req(struct fc_seq *sp, struct fc_frame *in_fp, } /** - * fc_lport_recv_echo_req - Handle received Request Node ID data request + * fc_lport_recv_echo_req() - Handle received Request Node ID data request * @lport: Fibre Channel local port recieving the RNID * @sp: current sequence in the RNID exchange * @fp: RNID request frame @@ -479,7 +479,7 @@ static void fc_lport_recv_rnid_req(struct fc_seq *sp, struct fc_frame *in_fp, } /** - * fc_lport_recv_adisc_req - Handle received Address Discovery Request + * fc_lport_recv_adisc_req() - Handle received Address Discovery Request * @lport: Fibre Channel local port recieving the ADISC * @sp: current sequence in the ADISC exchange * @fp: ADISC request frame @@ -529,7 +529,7 @@ static void fc_lport_recv_adisc_req(struct fc_seq *sp, struct fc_frame *in_fp, } /** - * fc_lport_recv_logo_req - Handle received fabric LOGO request + * fc_lport_recv_logo_req() - Handle received fabric LOGO request * @lport: Fibre Channel local port recieving the LOGO * @sp: current sequence in the LOGO exchange * @fp: LOGO request frame @@ -546,7 +546,7 @@ static void fc_lport_recv_logo_req(struct fc_seq *sp, struct fc_frame *fp, } /** - * fc_fabric_login - Start the lport state machine + * fc_fabric_login() - Start the lport state machine * @lport: The lport that should log into the fabric * * Locking Note: This function should not be called @@ -568,7 +568,7 @@ int fc_fabric_login(struct fc_lport *lport) EXPORT_SYMBOL(fc_fabric_login); /** - * fc_linkup - Handler for transport linkup events + * fc_linkup() - Handler for transport linkup events * @lport: The lport whose link is up */ void fc_linkup(struct fc_lport *lport) @@ -588,7 +588,7 @@ void fc_linkup(struct fc_lport *lport) EXPORT_SYMBOL(fc_linkup); /** - * fc_linkdown - Handler for transport linkdown events + * fc_linkdown() - Handler for transport linkdown events * @lport: The lport whose link is down */ void fc_linkdown(struct fc_lport *lport) @@ -607,12 +607,12 @@ void fc_linkdown(struct fc_lport *lport) EXPORT_SYMBOL(fc_linkdown); /** - * fc_fabric_logoff - Logout of the fabric + * fc_fabric_logoff() - Logout of the fabric * @lport: fc_lport pointer to logoff the fabric * * Return value: * 0 for success, -1 for failure - **/ + */ int fc_fabric_logoff(struct fc_lport *lport) { lport->tt.disc_stop_final(lport); @@ -625,7 +625,7 @@ int fc_fabric_logoff(struct fc_lport *lport) EXPORT_SYMBOL(fc_fabric_logoff); /** - * fc_lport_destroy - unregister a fc_lport + * fc_lport_destroy() - unregister a fc_lport * @lport: fc_lport pointer to unregister * * Return value: @@ -635,7 +635,7 @@ EXPORT_SYMBOL(fc_fabric_logoff); * clean-up all the allocated memory * and free up other system resources. * - **/ + */ int fc_lport_destroy(struct fc_lport *lport) { lport->tt.frame_send = fc_frame_drop; @@ -646,15 +646,14 @@ int fc_lport_destroy(struct fc_lport *lport) EXPORT_SYMBOL(fc_lport_destroy); /** - * fc_set_mfs - sets up the mfs for the corresponding fc_lport + * fc_set_mfs() - sets up the mfs for the corresponding fc_lport * @lport: fc_lport pointer to unregister * @mfs: the new mfs for fc_lport * * Set mfs for the given fc_lport to the new mfs. * * Return: 0 for success - * - **/ + */ int fc_set_mfs(struct fc_lport *lport, u32 mfs) { unsigned int old_mfs; @@ -683,7 +682,7 @@ int fc_set_mfs(struct fc_lport *lport, u32 mfs) EXPORT_SYMBOL(fc_set_mfs); /** - * fc_lport_disc_callback - Callback for discovery events + * fc_lport_disc_callback() - Callback for discovery events * @lport: FC local port * @event: The discovery event */ @@ -708,7 +707,7 @@ void fc_lport_disc_callback(struct fc_lport *lport, enum fc_disc_event event) } /** - * fc_rport_enter_ready - Enter the ready state and start discovery + * fc_rport_enter_ready() - Enter the ready state and start discovery * @lport: Fibre Channel local port that is ready * * Locking Note: The lport lock is expected to be held before calling @@ -725,7 +724,7 @@ static void fc_lport_enter_ready(struct fc_lport *lport) } /** - * fc_lport_recv_flogi_req - Receive a FLOGI request + * fc_lport_recv_flogi_req() - Receive a FLOGI request * @sp_in: The sequence the FLOGI is on * @rx_fp: The frame the FLOGI is in * @lport: The lport that recieved the request @@ -815,7 +814,7 @@ out: } /** - * fc_lport_recv_req - The generic lport request handler + * fc_lport_recv_req() - The generic lport request handler * @lport: The lport that received the request * @sp: The sequence the request is on * @fp: The frame the request is in @@ -911,7 +910,7 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_seq *sp, } /** - * fc_lport_reset - Reset an lport + * fc_lport_reset() - Reset an lport * @lport: The lport which should be reset * * Locking Note: This functions should not be called with the @@ -928,7 +927,7 @@ int fc_lport_reset(struct fc_lport *lport) EXPORT_SYMBOL(fc_lport_reset); /** - * fc_rport_enter_reset - Reset the local port + * fc_rport_enter_reset() - Reset the local port * @lport: Fibre Channel local port to be reset * * Locking Note: The lport lock is expected to be held before calling @@ -960,7 +959,7 @@ static void fc_lport_enter_reset(struct fc_lport *lport) } /** - * fc_lport_error - Handler for any errors + * fc_lport_error() - Handler for any errors * @lport: The fc_lport object * @fp: The frame pointer * @@ -1007,8 +1006,8 @@ static void fc_lport_error(struct fc_lport *lport, struct fc_frame *fp) } /** - * fc_lport_rft_id_resp - Handle response to Register Fibre - * Channel Types by ID (RPN_ID) request + * fc_lport_rft_id_resp() - Handle response to Register Fibre + * Channel Types by ID (RPN_ID) request * @sp: current sequence in RPN_ID exchange * @fp: response frame * @lp_arg: Fibre Channel host port instance @@ -1059,8 +1058,8 @@ err: } /** - * fc_lport_rpn_id_resp - Handle response to Register Port - * Name by ID (RPN_ID) request + * fc_lport_rpn_id_resp() - Handle response to Register Port + * Name by ID (RPN_ID) request * @sp: current sequence in RPN_ID exchange * @fp: response frame * @lp_arg: Fibre Channel host port instance @@ -1111,7 +1110,7 @@ err: } /** - * fc_lport_scr_resp - Handle response to State Change Register (SCR) request + * fc_lport_scr_resp() - Handle response to State Change Register (SCR) request * @sp: current sequence in SCR exchange * @fp: response frame * @lp_arg: Fibre Channel lport port instance that sent the registration request @@ -1157,7 +1156,7 @@ err: } /** - * fc_lport_enter_scr - Send a State Change Register (SCR) request + * fc_lport_enter_scr() - Send a State Change Register (SCR) request * @lport: Fibre Channel local port to register for state changes * * Locking Note: The lport lock is expected to be held before calling @@ -1184,7 +1183,7 @@ static void fc_lport_enter_scr(struct fc_lport *lport) } /** - * fc_lport_enter_rft_id - Register FC4-types with the name server + * fc_lport_enter_rft_id() - Register FC4-types with the name server * @lport: Fibre Channel local port to register * * Locking Note: The lport lock is expected to be held before calling @@ -1226,7 +1225,7 @@ static void fc_lport_enter_rft_id(struct fc_lport *lport) } /** - * fc_rport_enter_rft_id - Register port name with the name server + * fc_rport_enter_rft_id() - Register port name with the name server * @lport: Fibre Channel local port to register * * Locking Note: The lport lock is expected to be held before calling @@ -1259,7 +1258,7 @@ static struct fc_rport_operations fc_lport_rport_ops = { }; /** - * fc_rport_enter_dns - Create a rport to the name server + * fc_rport_enter_dns() - Create a rport to the name server * @lport: Fibre Channel local port requesting a rport for the name server * * Locking Note: The lport lock is expected to be held before calling @@ -1296,7 +1295,7 @@ err: } /** - * fc_lport_timeout - Handler for the retry_work timer. + * fc_lport_timeout() - Handler for the retry_work timer. * @work: The work struct of the fc_lport */ static void fc_lport_timeout(struct work_struct *work) @@ -1337,7 +1336,7 @@ static void fc_lport_timeout(struct work_struct *work) } /** - * fc_lport_logo_resp - Handle response to LOGO request + * fc_lport_logo_resp() - Handle response to LOGO request * @sp: current sequence in LOGO exchange * @fp: response frame * @lp_arg: Fibre Channel lport port instance that sent the LOGO request @@ -1383,7 +1382,7 @@ err: } /** - * fc_rport_enter_logo - Logout of the fabric + * fc_rport_enter_logo() - Logout of the fabric * @lport: Fibre Channel local port to be logged out * * Locking Note: The lport lock is expected to be held before calling @@ -1415,7 +1414,7 @@ static void fc_lport_enter_logo(struct fc_lport *lport) } /** - * fc_lport_flogi_resp - Handle response to FLOGI request + * fc_lport_flogi_resp() - Handle response to FLOGI request * @sp: current sequence in FLOGI exchange * @fp: response frame * @lp_arg: Fibre Channel lport port instance that sent the FLOGI request @@ -1510,7 +1509,7 @@ err: } /** - * fc_rport_enter_flogi - Send a FLOGI request to the fabric manager + * fc_rport_enter_flogi() - Send a FLOGI request to the fabric manager * @lport: Fibre Channel local port to be logged in to the fabric * * Locking Note: The lport lock is expected to be held before calling diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 4f23a9bb15a1..6f07de15c491 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -146,7 +146,7 @@ struct fc_rport *fc_rport_rogue_create(struct fc_disc_port *dp) } /** - * fc_rport_state - return a string for the state the rport is in + * fc_rport_state() - return a string for the state the rport is in * @rport: The rport whose state we want to get a string for */ static const char *fc_rport_state(struct fc_rport *rport) @@ -161,7 +161,7 @@ static const char *fc_rport_state(struct fc_rport *rport) } /** - * fc_set_rport_loss_tmo - Set the remote port loss timeout in seconds. + * fc_set_rport_loss_tmo() - Set the remote port loss timeout in seconds. * @rport: Pointer to Fibre Channel remote port structure * @timeout: timeout in seconds */ @@ -175,7 +175,7 @@ void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout) EXPORT_SYMBOL(fc_set_rport_loss_tmo); /** - * fc_plogi_get_maxframe - Get max payload from the common service parameters + * fc_plogi_get_maxframe() - Get max payload from the common service parameters * @flp: FLOGI payload structure * @maxval: upper limit, may be less than what is in the service parameters */ @@ -198,7 +198,7 @@ fc_plogi_get_maxframe(struct fc_els_flogi *flp, unsigned int maxval) } /** - * fc_rport_state_enter - Change the rport's state + * fc_rport_state_enter() - Change the rport's state * @rport: The rport whose state should change * @new: The new state of the rport * @@ -292,7 +292,7 @@ static void fc_rport_work(struct work_struct *work) } /** - * fc_rport_login - Start the remote port login state machine + * fc_rport_login() - Start the remote port login state machine * @rport: Fibre Channel remote port * * Locking Note: Called without the rport lock held. This @@ -315,7 +315,7 @@ int fc_rport_login(struct fc_rport *rport) } /** - * fc_rport_logoff - Logoff and remove an rport + * fc_rport_logoff() - Logoff and remove an rport * @rport: Fibre Channel remote port to be removed * * Locking Note: Called without the rport lock held. This @@ -353,7 +353,7 @@ int fc_rport_logoff(struct fc_rport *rport) } /** - * fc_rport_enter_ready - The rport is ready + * fc_rport_enter_ready() - The rport is ready * @rport: Fibre Channel remote port that is ready * * Locking Note: The rport lock is expected to be held before calling @@ -372,7 +372,7 @@ static void fc_rport_enter_ready(struct fc_rport *rport) } /** - * fc_rport_timeout - Handler for the retry_work timer. + * fc_rport_timeout() - Handler for the retry_work timer. * @work: The work struct of the fc_rport_libfc_priv * * Locking Note: Called without the rport lock held. This @@ -411,7 +411,7 @@ static void fc_rport_timeout(struct work_struct *work) } /** - * fc_rport_error - Error handler, called once retries have been exhausted + * fc_rport_error() - Error handler, called once retries have been exhausted * @rport: The fc_rport object * @fp: The frame pointer * @@ -444,7 +444,7 @@ static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp) } /** - * fc_rport_error_retry - Error handler when retries are desired + * fc_rport_error_retry() - Error handler when retries are desired * @rport: The fc_rport object * @fp: The frame pointer * @@ -479,7 +479,7 @@ static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp) } /** - * fc_rport_plogi_recv_resp - Handle incoming ELS PLOGI response + * fc_rport_plogi_recv_resp() - Handle incoming ELS PLOGI response * @sp: current sequence in the PLOGI exchange * @fp: response frame * @rp_arg: Fibre Channel remote port @@ -554,7 +554,7 @@ err: } /** - * fc_rport_enter_plogi - Send Port Login (PLOGI) request to peer + * fc_rport_enter_plogi() - Send Port Login (PLOGI) request to peer * @rport: Fibre Channel remote port to send PLOGI to * * Locking Note: The rport lock is expected to be held before calling @@ -587,7 +587,7 @@ static void fc_rport_enter_plogi(struct fc_rport *rport) } /** - * fc_rport_prli_resp - Process Login (PRLI) response handler + * fc_rport_prli_resp() - Process Login (PRLI) response handler * @sp: current sequence in the PRLI exchange * @fp: response frame * @rp_arg: Fibre Channel remote port @@ -657,7 +657,7 @@ err: } /** - * fc_rport_logo_resp - Logout (LOGO) response handler + * fc_rport_logo_resp() - Logout (LOGO) response handler * @sp: current sequence in the LOGO exchange * @fp: response frame * @rp_arg: Fibre Channel remote port @@ -706,7 +706,7 @@ err: } /** - * fc_rport_enter_prli - Send Process Login (PRLI) request to peer + * fc_rport_enter_prli() - Send Process Login (PRLI) request to peer * @rport: Fibre Channel remote port to send PRLI to * * Locking Note: The rport lock is expected to be held before calling @@ -741,7 +741,7 @@ static void fc_rport_enter_prli(struct fc_rport *rport) } /** - * fc_rport_els_rtv_resp - Request Timeout Value response handler + * fc_rport_els_rtv_resp() - Request Timeout Value response handler * @sp: current sequence in the RTV exchange * @fp: response frame * @rp_arg: Fibre Channel remote port @@ -807,7 +807,7 @@ err: } /** - * fc_rport_enter_rtv - Send Request Timeout Value (RTV) request to peer + * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request to peer * @rport: Fibre Channel remote port to send RTV to * * Locking Note: The rport lock is expected to be held before calling @@ -838,7 +838,7 @@ static void fc_rport_enter_rtv(struct fc_rport *rport) } /** - * fc_rport_enter_logo - Send Logout (LOGO) request to peer + * fc_rport_enter_logo() - Send Logout (LOGO) request to peer * @rport: Fibre Channel remote port to send LOGO to * * Locking Note: The rport lock is expected to be held before calling @@ -870,7 +870,7 @@ static void fc_rport_enter_logo(struct fc_rport *rport) /** - * fc_rport_recv_req - Receive a request from a rport + * fc_rport_recv_req() - Receive a request from a rport * @sp: current sequence in the PLOGI exchange * @fp: response frame * @rp_arg: Fibre Channel remote port @@ -931,7 +931,7 @@ void fc_rport_recv_req(struct fc_seq *sp, struct fc_frame *fp, } /** - * fc_rport_recv_plogi_req - Handle incoming Port Login (PLOGI) request + * fc_rport_recv_plogi_req() - Handle incoming Port Login (PLOGI) request * @rport: Fibre Channel remote port that initiated PLOGI * @sp: current sequence in the PLOGI exchange * @fp: PLOGI request frame @@ -1053,7 +1053,7 @@ static void fc_rport_recv_plogi_req(struct fc_rport *rport, } /** - * fc_rport_recv_prli_req - Handle incoming Process Login (PRLI) request + * fc_rport_recv_prli_req() - Handle incoming Process Login (PRLI) request * @rport: Fibre Channel remote port that initiated PRLI * @sp: current sequence in the PRLI exchange * @fp: PRLI request frame @@ -1204,7 +1204,7 @@ static void fc_rport_recv_prli_req(struct fc_rport *rport, } /** - * fc_rport_recv_prlo_req - Handle incoming Process Logout (PRLO) request + * fc_rport_recv_prlo_req() - Handle incoming Process Logout (PRLO) request * @rport: Fibre Channel remote port that initiated PRLO * @sp: current sequence in the PRLO exchange * @fp: PRLO request frame @@ -1235,7 +1235,7 @@ static void fc_rport_recv_prlo_req(struct fc_rport *rport, struct fc_seq *sp, } /** - * fc_rport_recv_logo_req - Handle incoming Logout (LOGO) request + * fc_rport_recv_logo_req() - Handle incoming Logout (LOGO) request * @rport: Fibre Channel remote port that initiated LOGO * @sp: current sequence in the LOGO exchange * @fp: LOGO request frame diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 282829cdf352..a2e126b86e3e 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -665,7 +665,7 @@ struct fc_lport { struct delayed_work disc_work; }; -/** +/* * FC_LPORT HELPER FUNCTIONS *****************************/ static inline void *lport_priv(const struct fc_lport *lp) @@ -697,7 +697,7 @@ static inline void fc_lport_state_enter(struct fc_lport *lp, } -/** +/* * LOCAL PORT LAYER *****************************/ int fc_lport_init(struct fc_lport *lp); @@ -747,19 +747,19 @@ int fc_lport_reset(struct fc_lport *); int fc_set_mfs(struct fc_lport *lp, u32 mfs); -/** +/* * REMOTE PORT LAYER *****************************/ int fc_rport_init(struct fc_lport *lp); void fc_rport_terminate_io(struct fc_rport *rp); -/** +/* * DISCOVERY LAYER *****************************/ int fc_disc_init(struct fc_lport *lp); -/** +/* * SCSI LAYER *****************************/ /* @@ -820,7 +820,7 @@ int fc_change_queue_type(struct scsi_device *sdev, int tag_type); */ void fc_fcp_destroy(struct fc_lport *); -/** +/* * ELS/CT interface *****************************/ /* @@ -829,7 +829,7 @@ void fc_fcp_destroy(struct fc_lport *); int fc_elsct_init(struct fc_lport *lp); -/** +/* * EXCHANGE MANAGER LAYER *****************************/ /* -- cgit v1.2.3 From b2ab99c9a300e572105d6db7f6efe0a4d1572167 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:50 -0800 Subject: [SCSI] libfc, fcoe: Cleanup function formatting and minor typos 1) There were a few functions with a strange layout, i.e. all arguments on the second line, when not necessary. Where ever possible I moved the return value to the same line as the function name. However, when the line was too long to have a single argument on the same line I moved the return value to above line. For example: (, ) and (, ) 2) Removed one extra whitespace line 3) Fixed two typos Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fc_transport_fcoe.c | 11 ++++++----- drivers/scsi/fcoe/libfcoe.c | 15 +++++++-------- drivers/scsi/libfc/fc_exch.c | 10 +++++----- drivers/scsi/libfc/fc_rport.c | 4 ++-- 4 files changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/fcoe/fc_transport_fcoe.c b/drivers/scsi/fcoe/fc_transport_fcoe.c index 0eea4c434c31..847453a70c62 100644 --- a/drivers/scsi/fcoe/fc_transport_fcoe.c +++ b/drivers/scsi/fcoe/fc_transport_fcoe.c @@ -62,8 +62,9 @@ struct pci_dev *fcoe_transport_pcidev(const struct net_device *netdev) * * Returns: 0 for success */ -static struct fcoe_transport_internal *fcoe_transport_device_lookup( - struct fcoe_transport *t, struct net_device *netdev) +static struct fcoe_transport_internal * +fcoe_transport_device_lookup(struct fcoe_transport *t, + struct net_device *netdev) { struct fcoe_transport_internal *ti; @@ -184,7 +185,7 @@ static void fcoe_transport_device_remove_all(struct fcoe_transport *t) * Returns: true for match up */ static bool fcoe_transport_match(struct fcoe_transport *t, - struct net_device *netdev) + struct net_device *netdev) { /* match transport by vendor and device id */ struct pci_dev *pci; @@ -217,8 +218,8 @@ static bool fcoe_transport_match(struct fcoe_transport *t, * * TODO: return default sw transport if no other transport is found */ -static struct fcoe_transport *fcoe_transport_lookup( - struct net_device *netdev) +static struct fcoe_transport * +fcoe_transport_lookup(struct net_device *netdev) { struct fcoe_transport *t; diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 5e68652985b2..d006d6576817 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -949,8 +949,8 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer) * * Returns: ptr to the struct module, NULL for failure */ -static struct module *fcoe_netdev_to_module_owner( - const struct net_device *netdev) +static struct module * +fcoe_netdev_to_module_owner(const struct net_device *netdev) { struct device *dev; @@ -1205,8 +1205,8 @@ EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue); * Returns: ptr to Scsi_Host * TODO: to libfc? */ -static inline struct Scsi_Host *libfc_host_alloc( - struct scsi_host_template *sht, int priv_size) +static inline struct Scsi_Host * +libfc_host_alloc(struct scsi_host_template *sht, int priv_size) { return scsi_host_alloc(sht, sizeof(struct fc_lport) + priv_size); } @@ -1285,8 +1285,8 @@ EXPORT_SYMBOL_GPL(fcoe_wwn_from_mac); * * Returns: NULL or the located fcoe_softc */ -static struct fcoe_softc *fcoe_hostlist_lookup_softc( - const struct net_device *dev) +static struct fcoe_softc * +fcoe_hostlist_lookup_softc(const struct net_device *dev) { struct fcoe_softc *fc; @@ -1426,7 +1426,6 @@ static int __init fcoe_init(void) } else { fcoe_percpu[cpu] = NULL; kfree(p); - } } } @@ -1476,7 +1475,7 @@ static void __exit fcoe_exit(void) */ del_timer_sync(&fcoe_timer); - /* releases the assocaited fcoe transport for each lport */ + /* releases the associated fcoe transport for each lport */ list_for_each_entry_safe(fc, tmp, &fcoe_hostlist, list) fcoe_transport_release(fc->real_dev); diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 8c4018956d4c..7b933954c107 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -675,8 +675,8 @@ static struct fc_exch *fc_exch_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) * If fc_pf_rjt_reason is FC_RJT_NONE then this function will have a hold * on the ep that should be released by the caller. */ -static enum fc_pf_rjt_reason -fc_seq_lookup_recip(struct fc_exch_mgr *mp, struct fc_frame *fp) +static enum fc_pf_rjt_reason fc_seq_lookup_recip(struct fc_exch_mgr *mp, + struct fc_frame *fp) { struct fc_frame_header *fh = fc_frame_header_get(fp); struct fc_exch *ep = NULL; @@ -994,9 +994,9 @@ static void fc_seq_send_ack(struct fc_seq *sp, const struct fc_frame *rx_fp) * Send BLS Reject. * This is for rejecting BA_ABTS only. */ -static void -fc_exch_send_ba_rjt(struct fc_frame *rx_fp, enum fc_ba_rjt_reason reason, - enum fc_ba_rjt_explan explan) +static void fc_exch_send_ba_rjt(struct fc_frame *rx_fp, + enum fc_ba_rjt_reason reason, + enum fc_ba_rjt_explan explan) { struct fc_frame *fp; struct fc_frame_header *rx_fh; diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 6f07de15c491..dae65133a833 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -179,8 +179,8 @@ EXPORT_SYMBOL(fc_set_rport_loss_tmo); * @flp: FLOGI payload structure * @maxval: upper limit, may be less than what is in the service parameters */ -static unsigned int -fc_plogi_get_maxframe(struct fc_els_flogi *flp, unsigned int maxval) +static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp, + unsigned int maxval) { unsigned int mfs; -- cgit v1.2.3 From fc47ff6b1b27fb736f255ed8cd490356e0cd228f Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:55 -0800 Subject: [SCSI] libfc, fcoe: Remove unnecessary cast by removing inline wrapper Comment from "Andrew Morton " > +{ > + return (struct fcoe_softc *)lport_priv(lp); unneeded/undesirable cast of void*. There are probably zillions of instances of this - there always are. This whole inline function was unnecessary. The FCoE layer knows that it's data structure is stored in the lport private data, it can just access it from lport_priv(). Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe_sw.c | 2 +- drivers/scsi/fcoe/libfcoe.c | 12 ++++++------ include/scsi/libfcoe.h | 8 +------- 3 files changed, 8 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index 007d1fbae808..f667dce1bbba 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -297,7 +297,7 @@ static int fcoe_sw_destroy(struct net_device *netdev) if (!lp) return -ENODEV; - fc = fcoe_softc(lp); + fc = lport_priv(lp); /* Logout of the fabric */ fc_fabric_logoff(lp); diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index d006d6576817..02f044a87159 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -387,7 +387,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) WARN_ON((fr_len(fp) % sizeof(u32)) != 0); - fc = fcoe_softc(lp); + fc = lport_priv(lp); /* * if it is a flogi then we need to learn gw-addr * and my own fcid @@ -768,7 +768,7 @@ static int fcoe_check_wait_queue(struct fc_lport *lp) struct sk_buff *skb; struct fcoe_softc *fc; - fc = fcoe_softc(lp); + fc = lport_priv(lp); spin_lock_bh(&fc->fcoe_pending_queue.lock); /* @@ -805,7 +805,7 @@ static void fcoe_insert_wait_queue_head(struct fc_lport *lp, { struct fcoe_softc *fc; - fc = fcoe_softc(lp); + fc = lport_priv(lp); spin_lock_bh(&fc->fcoe_pending_queue.lock); __skb_queue_head(&fc->fcoe_pending_queue, skb); spin_unlock_bh(&fc->fcoe_pending_queue.lock); @@ -823,7 +823,7 @@ static void fcoe_insert_wait_queue(struct fc_lport *lp, { struct fcoe_softc *fc; - fc = fcoe_softc(lp); + fc = lport_priv(lp); spin_lock_bh(&fc->fcoe_pending_queue.lock); __skb_queue_tail(&fc->fcoe_pending_queue, skb); spin_unlock_bh(&fc->fcoe_pending_queue.lock); @@ -1113,7 +1113,7 @@ MODULE_PARM_DESC(destroy, "Destroy fcoe port"); */ int fcoe_link_ok(struct fc_lport *lp) { - struct fcoe_softc *fc = fcoe_softc(lp); + struct fcoe_softc *fc = lport_priv(lp); struct net_device *dev = fc->real_dev; struct ethtool_cmd ecmd = { ETHTOOL_GSET }; int rc = 0; @@ -1329,7 +1329,7 @@ int fcoe_hostlist_add(const struct fc_lport *lp) fc = fcoe_hostlist_lookup_softc(fcoe_netdev(lp)); if (!fc) { - fc = fcoe_softc(lp); + fc = lport_priv(lp); write_lock_bh(&fcoe_hostlist_lock); list_add_tail(&fc->list, &fcoe_hostlist); write_unlock_bh(&fcoe_hostlist_lock); diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index 89fdbb9a6a1b..f43d3833a7a8 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -58,16 +58,10 @@ struct fcoe_softc { u8 address_mode; }; -static inline struct fcoe_softc *fcoe_softc( - const struct fc_lport *lp) -{ - return (struct fcoe_softc *)lport_priv(lp); -} - static inline struct net_device *fcoe_netdev( const struct fc_lport *lp) { - return fcoe_softc(lp)->real_dev; + return ((struct fcoe_softc *)lport_priv(lp))->real_dev; } static inline struct fcoe_hdr *skb_fcoe_header(const struct sk_buff *skb) -- cgit v1.2.3 From a468f328ad83f14556e5961ef1de80b32b428d32 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:56:00 -0800 Subject: [SCSI] fcoe: Use setup_timer() and mod_timer() Use helper functions for watchdog timer setup. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 02f044a87159..7887f2a7c2aa 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -1435,11 +1435,9 @@ static int __init fcoe_init(void) */ fcoe_dev_setup(); - init_timer(&fcoe_timer); - fcoe_timer.data = 0; - fcoe_timer.function = fcoe_watchdog; - fcoe_timer.expires = (jiffies + (10 * HZ)); - add_timer(&fcoe_timer); + setup_timer(&fcoe_timer, fcoe_watchdog, 0); + + mod_timer(&fcoe_timer, jiffies + (10 * HZ)); /* initiatlize the fcoe transport */ fcoe_transport_init(); -- cgit v1.2.3 From 03ec862dff57ca3d1fcb439b99aadc45bc5c2f28 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:56:06 -0800 Subject: [SCSI] fcoe: Correct fcoe_transports initialization vs. registration The registration function shouldn't initialize the mutex or list head. The fcoe SW transport should initialize itself before registering. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fc_transport_fcoe.c | 3 --- drivers/scsi/fcoe/fcoe_sw.c | 5 +++++ 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/fcoe/fc_transport_fcoe.c b/drivers/scsi/fcoe/fc_transport_fcoe.c index 847453a70c62..8862758006c0 100644 --- a/drivers/scsi/fcoe/fc_transport_fcoe.c +++ b/drivers/scsi/fcoe/fc_transport_fcoe.c @@ -258,9 +258,6 @@ int fcoe_transport_register(struct fcoe_transport *t) list_add_tail(&t->list, &fcoe_transports); mutex_unlock(&fcoe_transports_lock); - mutex_init(&t->devlock); - INIT_LIST_HEAD(&t->devlist); - printk(KERN_DEBUG "fcoe_transport_register:%s\n", t->name); return 0; diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index f667dce1bbba..37d359db1648 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -467,10 +467,15 @@ int __init fcoe_sw_init(void) /* attach to scsi transport */ scsi_transport_fcoe_sw = fc_attach_transport(&fcoe_sw_transport_function); + if (!scsi_transport_fcoe_sw) { printk(KERN_ERR "fcoe_sw_init:fc_attach_transport() failed\n"); return -ENODEV; } + + mutex_init(&fcoe_sw_transport.devlock); + INIT_LIST_HEAD(&fcoe_sw_transport.devlist); + /* register sw transport */ fcoe_transport_register(&fcoe_sw_transport); return 0; -- cgit v1.2.3 From 422819cfa3a2605a0b3bdc33aaef0bc2feaeaada Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 27 Feb 2009 10:56:11 -0800 Subject: [SCSI] libfc: do not change the fh_rx_id of a recevied frame We shouldn't be altering inbound frames. Signed-off-by: Yi Zou Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 7b933954c107..505825b6124d 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -625,7 +625,6 @@ static struct fc_exch *fc_exch_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) { struct fc_exch *ep; struct fc_frame_header *fh; - u16 rxid; ep = mp->lp->tt.exch_get(mp->lp, fp); if (ep) { @@ -652,18 +651,6 @@ static struct fc_exch *fc_exch_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) if ((ntoh24(fh->fh_f_ctl) & FC_FC_SEQ_INIT) == 0) ep->esb_stat &= ~ESB_ST_SEQ_INIT; - /* - * Set the responder ID in the frame header. - * The old one should've been 0xffff. - * If it isn't, don't assign one. - * Incoming basic link service frames may specify - * a referenced RX_ID. - */ - if (fh->fh_type != FC_TYPE_BLS) { - rxid = ntohs(fh->fh_rx_id); - WARN_ON(rxid != FC_XID_UNKNOWN); - fh->fh_rx_id = htons(ep->rxid); - } fc_exch_hold(ep); /* hold for caller */ spin_unlock_bh(&ep->ex_lock); /* lock from exch_get */ } -- cgit v1.2.3 From 74846bf85e42b4ba851d3f0dd67aa1df245895f9 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 27 Feb 2009 10:56:16 -0800 Subject: [SCSI] fcoe: ETH_P_8021Q is already in if_ether and fcoe is not using it anyway Signed-off-by: Yi Zou Signed-off-by: Robert Love Signed-off-by: James Bottomley --- include/scsi/fc/fc_fcoe.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/include/scsi/fc/fc_fcoe.h b/include/scsi/fc/fc_fcoe.h index 57aaa8f0d613..f271d9cc0fc2 100644 --- a/include/scsi/fc/fc_fcoe.h +++ b/include/scsi/fc/fc_fcoe.h @@ -31,10 +31,6 @@ #define ETH_P_FCOE 0x8906 /* FCOE ether type */ #endif -#ifndef ETH_P_8021Q -#define ETH_P_8021Q 0x8100 -#endif - /* * FC_FCOE_OUI hasn't been standardized yet. XXX TBD. */ -- cgit v1.2.3 From e904158159e9812d06646767b7c81846dc3b05e6 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 27 Feb 2009 10:56:22 -0800 Subject: [SCSI] fcoe: fix kfree(skb) Use kfree_skb instead of kfree for struct sk_buff pointers. Signed-off-by: Roel Kluin Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 7887f2a7c2aa..7265e0937995 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -437,7 +437,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) if (skb_is_nonlinear(skb)) { skb_frag_t *frag; if (fcoe_get_paged_crc_eof(skb, tlen)) { - kfree(skb); + kfree_skb(skb); return -ENOMEM; } frag = &skb_shinfo(skb)->frags[skb_shinfo(skb)->nr_frags - 1]; -- cgit v1.2.3 From c826a3145736e3baabebccfd0aecfbb6dae059f2 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:56:27 -0800 Subject: [SCSI] fcoe: Out of order tx frames was causing several check condition SCSI status frames followed by these errors in log. [sdp] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [sdp] Sense Key : Aborted Command [current] [sdp] Add. Sense: Data phase error This was causing some test apps to exit due to write failure under heavy load. This was due to a race around adding and removing tx frame skb in fcoe_pending_queue, Chris Leech helped me to find that brief unlocking period when pulling skb from fcoe_pending_queue in various contexts (fcoe_watchdog and fcoe_xmit) and then adding skb back into fcoe_pending_queue up on a failed fcoe_start_io could change skb/tx frame order in fcoe_pending_queue. Thanks Chris. This patch allows only single context to pull skb from fcoe_pending_queue at any time to prevent above described ordering issue/race by use of fcoe_pending_queue_active flag. This patch simplified fcoe_watchdog with modified fcoe_check_wait_queue by use of FCOE_LOW_QUEUE_DEPTH instead previously used several conditionals to clear and set lp->qfull. I think FCOE_MAX_QUEUE_DEPTH with FCOE_LOW_QUEUE_DEPTH will work better in re/setting lp->qfull and these could be fine tuned for performance. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe_sw.c | 1 + drivers/scsi/fcoe/libfcoe.c | 45 +++++++++++++++++++++------------------------ include/scsi/libfcoe.h | 1 + 3 files changed, 23 insertions(+), 24 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index 37d359db1648..da210eba1941 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -188,6 +188,7 @@ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev) skb_queue_head_init(&fc->fcoe_pending_queue); + fc->fcoe_pending_queue_active = 0; /* setup Source Mac Address */ memcpy(fc->ctl_src_addr, fc->real_dev->dev_addr, diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 7265e0937995..14dd8a0402b6 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -49,6 +49,7 @@ static int debug_fcoe; #define FCOE_MAX_QUEUE_DEPTH 256 +#define FCOE_LOW_QUEUE_DEPTH 32 /* destination address mode */ #define FCOE_GW_ADDR_MODE 0x00 @@ -723,21 +724,12 @@ static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa) */ void fcoe_watchdog(ulong vp) { - struct fc_lport *lp; struct fcoe_softc *fc; - int qfilled = 0; read_lock(&fcoe_hostlist_lock); list_for_each_entry(fc, &fcoe_hostlist, list) { - lp = fc->lp; - if (lp) { - if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) - qfilled = 1; - if (fcoe_check_wait_queue(lp) < FCOE_MAX_QUEUE_DEPTH) { - if (qfilled) - lp->qfull = 0; - } - } + if (fc->lp) + fcoe_check_wait_queue(fc->lp); } read_unlock(&fcoe_hostlist_lock); @@ -753,8 +745,8 @@ void fcoe_watchdog(ulong vp) * * This empties the wait_queue, dequeue the head of the wait_queue queue * and calls fcoe_start_io() for each packet, if all skb have been - * transmitted, return 0 if a error occurs, then restore wait_queue and - * try again later. + * transmitted, return qlen or -1 if a error occurs, then restore + * wait_queue and try again later. * * The wait_queue is used when the skb transmit fails. skb will go * in the wait_queue which will be emptied by the time function OR @@ -764,33 +756,38 @@ void fcoe_watchdog(ulong vp) */ static int fcoe_check_wait_queue(struct fc_lport *lp) { - int rc; struct sk_buff *skb; struct fcoe_softc *fc; + int rc = -1; fc = lport_priv(lp); spin_lock_bh(&fc->fcoe_pending_queue.lock); - /* - * if interface pending queue full then set qfull in lport. - */ - if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) - lp->qfull = 1; + if (fc->fcoe_pending_queue_active) + goto out; + fc->fcoe_pending_queue_active = 1; if (fc->fcoe_pending_queue.qlen) { while ((skb = __skb_dequeue(&fc->fcoe_pending_queue)) != NULL) { spin_unlock_bh(&fc->fcoe_pending_queue.lock); rc = fcoe_start_io(skb); - if (rc) { + if (rc) fcoe_insert_wait_queue_head(lp, skb); - return rc; - } spin_lock_bh(&fc->fcoe_pending_queue.lock); + if (rc) + break; } - if (fc->fcoe_pending_queue.qlen < FCOE_MAX_QUEUE_DEPTH) + /* + * if interface pending queue is below FCOE_LOW_QUEUE_DEPTH + * then clear qfull flag. + */ + if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH) lp->qfull = 0; } + fc->fcoe_pending_queue_active = 0; + rc = fc->fcoe_pending_queue.qlen; +out: spin_unlock_bh(&fc->fcoe_pending_queue.lock); - return fc->fcoe_pending_queue.qlen; + return rc; } /** diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index f43d3833a7a8..941818f29f59 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -46,6 +46,7 @@ struct fcoe_softc { struct net_device *phys_dev; /* device with ethtool_ops */ struct packet_type fcoe_packet_type; struct sk_buff_head fcoe_pending_queue; + u8 fcoe_pending_queue_active; u8 dest_addr[ETH_ALEN]; u8 ctl_src_addr[ETH_ALEN]; -- cgit v1.2.3 From 55c8bafba549e3e82f6999db8c5a62fc3c255c14 Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 27 Feb 2009 10:56:32 -0800 Subject: [SCSI] fcoe: fix handling of pending queue, prevent out of order frames (v3) In fcoe_check_wait_queue() the queue length could temporarily drop to 0, before the last frame was successfully sent. This resulted in out of order data frames within a single sequence, leading to IO timeout errors. This builds on the approach from Vasu Dev to only fix the queue management in fcoe_check_wait_queue, where my first patch added locking to the transmit path even when the pending queue was not in use. This patch continues to use fcoe_pending_queue.qlen instead of introducing a new length counter, but takes precautions to ensure it never drops to 0 before the final frame in the queue has successfully been passed to the netdev qdisc layer. It also includes some cleanup of fcoe_check_wait_queue and removes the fcoe_insert_wait_queue(_head) wrapper functions. Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 81 ++++++++++++++------------------------------- 1 file changed, 24 insertions(+), 57 deletions(-) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 14dd8a0402b6..0e0b494fc17c 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -70,8 +70,6 @@ struct fcoe_percpu_s *fcoe_percpu[NR_CPUS]; /* Function Prototyes */ static int fcoe_check_wait_queue(struct fc_lport *); -static void fcoe_insert_wait_queue_head(struct fc_lport *, struct sk_buff *); -static void fcoe_insert_wait_queue(struct fc_lport *, struct sk_buff *); static void fcoe_recv_flogi(struct fcoe_softc *, struct fc_frame *, u8 *); #ifdef CONFIG_HOTPLUG_CPU static int fcoe_cpu_callback(struct notifier_block *, ulong, void *); @@ -501,7 +499,9 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) rc = fcoe_start_io(skb); if (rc) { - fcoe_insert_wait_queue(lp, skb); + spin_lock_bh(&fc->fcoe_pending_queue.lock); + __skb_queue_tail(&fc->fcoe_pending_queue, skb); + spin_unlock_bh(&fc->fcoe_pending_queue.lock); if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) lp->qfull = 1; } @@ -756,33 +756,36 @@ void fcoe_watchdog(ulong vp) */ static int fcoe_check_wait_queue(struct fc_lport *lp) { + struct fcoe_softc *fc = lport_priv(lp); struct sk_buff *skb; - struct fcoe_softc *fc; int rc = -1; - fc = lport_priv(lp); spin_lock_bh(&fc->fcoe_pending_queue.lock); - if (fc->fcoe_pending_queue_active) goto out; fc->fcoe_pending_queue_active = 1; - if (fc->fcoe_pending_queue.qlen) { - while ((skb = __skb_dequeue(&fc->fcoe_pending_queue)) != NULL) { - spin_unlock_bh(&fc->fcoe_pending_queue.lock); - rc = fcoe_start_io(skb); - if (rc) - fcoe_insert_wait_queue_head(lp, skb); - spin_lock_bh(&fc->fcoe_pending_queue.lock); - if (rc) - break; + + while (fc->fcoe_pending_queue.qlen) { + /* keep qlen > 0 until fcoe_start_io succeeds */ + fc->fcoe_pending_queue.qlen++; + skb = __skb_dequeue(&fc->fcoe_pending_queue); + + spin_unlock_bh(&fc->fcoe_pending_queue.lock); + rc = fcoe_start_io(skb); + spin_lock_bh(&fc->fcoe_pending_queue.lock); + + if (rc) { + __skb_queue_head(&fc->fcoe_pending_queue, skb); + /* undo temporary increment above */ + fc->fcoe_pending_queue.qlen--; + break; } - /* - * if interface pending queue is below FCOE_LOW_QUEUE_DEPTH - * then clear qfull flag. - */ - if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH) - lp->qfull = 0; + /* undo temporary increment above */ + fc->fcoe_pending_queue.qlen--; } + + if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH) + lp->qfull = 0; fc->fcoe_pending_queue_active = 0; rc = fc->fcoe_pending_queue.qlen; out: @@ -790,42 +793,6 @@ out: return rc; } -/** - * fcoe_insert_wait_queue_head() - puts skb to fcoe pending queue head - * @lp: the fc_port for this skb - * @skb: the associated skb to be xmitted - * - * Returns: none - */ -static void fcoe_insert_wait_queue_head(struct fc_lport *lp, - struct sk_buff *skb) -{ - struct fcoe_softc *fc; - - fc = lport_priv(lp); - spin_lock_bh(&fc->fcoe_pending_queue.lock); - __skb_queue_head(&fc->fcoe_pending_queue, skb); - spin_unlock_bh(&fc->fcoe_pending_queue.lock); -} - -/** - * fcoe_insert_wait_queue() - put the skb into fcoe pending queue tail - * @lp: the fc_port for this skb - * @skb: the associated skb to be xmitted - * - * Returns: none - */ -static void fcoe_insert_wait_queue(struct fc_lport *lp, - struct sk_buff *skb) -{ - struct fcoe_softc *fc; - - fc = lport_priv(lp); - spin_lock_bh(&fc->fcoe_pending_queue.lock); - __skb_queue_tail(&fc->fcoe_pending_queue, skb); - spin_unlock_bh(&fc->fcoe_pending_queue.lock); -} - /** * fcoe_dev_setup() - setup link change notification interface */ -- cgit v1.2.3 From 4469c195da43bf8220f53da8b576c0e154c2b662 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:56:38 -0800 Subject: [SCSI] fcoe: Change fcoe receive thread nice value from 19 (lowest priority) to -20 This change makes the fcoe Rx threads have the same nice value as lpfc and qla2xxx Rx threads. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 0e0b494fc17c..5548bf3bb58b 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -531,7 +531,7 @@ int fcoe_percpu_receive_thread(void *arg) struct fcoe_softc *fc; struct fcoe_hdr *hp; - set_user_nice(current, 19); + set_user_nice(current, -20); while (!kthread_should_stop()) { -- cgit v1.2.3 From 6431c5dc5eeaa79863b4af300c081a01e2ccd0bb Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 5 Mar 2009 11:07:00 -0800 Subject: [SCSI] qla2xxx: Correct address range checking for option-rom updates. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index f4c57227ec18..ee9d40152430 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -244,12 +244,6 @@ qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, if (ha->optrom_state != QLA_SWAITING) break; - if (start & 0xfff) { - qla_printk(KERN_WARNING, ha, - "Invalid start region 0x%x/0x%x.\n", start, size); - return -EINVAL; - } - ha->optrom_region_start = start; ha->optrom_region_size = start + size > ha->optrom_size ? ha->optrom_size - start : size; @@ -303,8 +297,7 @@ qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, else if (start == (ha->flt_region_boot * 4) || start == (ha->flt_region_fw * 4)) valid = 1; - else if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && - start == (ha->flt_region_vpd_nvram * 4)) + else if (IS_QLA25XX(ha) || IS_QLA81XX(ha)) valid = 1; if (!valid) { qla_printk(KERN_WARNING, ha, -- cgit v1.2.3 From 605aa2bcd5e9dddc4666f12e0c19822809186d6d Mon Sep 17 00:00:00 2001 From: Lalit Chandivade Date: Thu, 5 Mar 2009 11:07:01 -0800 Subject: [SCSI] qla2xxx: Use correct value for max vport in LOOP topology. Use minimum value for max vport during firmware initialization in LOOP topology. Using max vport value from get resource count in LOOP topology causes firmware initialization failure. Signed-off-by: Lalit Chandivade Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 986501759ad4..14325c027336 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1308,8 +1308,12 @@ qla2x00_init_rings(scsi_qla_host_t *vha) DEBUG(printk("scsi(%ld): Issue init firmware.\n", vha->host_no)); - if (ha->flags.npiv_supported) + if (ha->flags.npiv_supported) { + if (ha->operating_mode == LOOP) + ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1; mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports); + } + mid_init_cb->options = __constant_cpu_to_le16(BIT_1); -- cgit v1.2.3 From ee546b6e048586381462ce7bb51c7ddc03819619 Mon Sep 17 00:00:00 2001 From: Anirban Chakraborty Date: Thu, 5 Mar 2009 11:07:02 -0800 Subject: [SCSI] qla2xxx: Correct vport delete bug. Signed-off-by: Anirban Chakraborty Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 11 +++++++---- drivers/scsi/qla2xxx/qla_mbx.c | 3 ++- drivers/scsi/qla2xxx/qla_mid.c | 10 ++++++---- 3 files changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 14325c027336..e54ab2f10795 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -2614,6 +2614,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, port_id_t wrap, nxt_d_id; struct qla_hw_data *ha = vha->hw; struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev); + struct scsi_qla_host *tvp; rval = QLA_SUCCESS; @@ -2713,7 +2714,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, /* Bypass virtual ports of the same host. */ found = 0; if (ha->num_vhosts) { - list_for_each_entry(vp, &ha->vp_list, list) { + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) { if (new_fcport->d_id.b24 == vp->d_id.b24) { found = 1; break; @@ -2836,6 +2837,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev) uint16_t first_loop_id; struct qla_hw_data *ha = vha->hw; struct scsi_qla_host *vp; + struct scsi_qla_host *tvp; rval = QLA_SUCCESS; @@ -2860,7 +2862,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev) /* Check for loop ID being already in use. */ found = 0; fcport = NULL; - list_for_each_entry(vp, &ha->vp_list, list) { + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) { list_for_each_entry(fcport, &vp->vp_fcports, list) { if (fcport->loop_id == dev->loop_id && fcport != dev) { @@ -3295,6 +3297,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) uint8_t status = 0; struct qla_hw_data *ha = vha->hw; struct scsi_qla_host *vp; + struct scsi_qla_host *tvp; struct req_que *req = ha->req_q_map[0]; if (vha->flags.online) { @@ -3310,7 +3313,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) if (atomic_read(&vha->loop_state) != LOOP_DOWN) { atomic_set(&vha->loop_state, LOOP_DOWN); qla2x00_mark_all_devices_lost(vha, 0); - list_for_each_entry(vp, &ha->vp_list, list) + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) qla2x00_mark_all_devices_lost(vp, 0); } else { if (!atomic_read(&vha->loop_down_timer)) @@ -3407,7 +3410,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) DEBUG(printk(KERN_INFO "qla2x00_abort_isp(%ld): succeeded.\n", vha->host_no)); - list_for_each_entry(vp, &ha->vp_list, list) { + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) { if (vp->vp_idx) qla2x00_vp_abort_isp(vp); } diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 4c7504cb3990..4aab7acf7525 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2685,6 +2685,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, uint16_t stat = le16_to_cpu(rptid_entry->vp_idx); struct qla_hw_data *ha = vha->hw; scsi_qla_host_t *vp; + scsi_qla_host_t *tvp; if (rptid_entry->entry_status != 0) return; @@ -2710,7 +2711,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, if (MSB(stat) == 1) return; - list_for_each_entry(vp, &ha->vp_list, list) + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) if (vp_idx == vp->vp_idx) break; if (!vp) diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index 3f23932210c4..785c61279e6e 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -69,9 +69,10 @@ static scsi_qla_host_t * qla24xx_find_vhost_by_name(struct qla_hw_data *ha, uint8_t *port_name) { scsi_qla_host_t *vha; + struct scsi_qla_host *tvha; /* Locate matching device in database. */ - list_for_each_entry(vha, &ha->vp_list, list) { + list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) { if (!memcmp(port_name, vha->port_name, WWN_SIZE)) return vha; } @@ -194,11 +195,11 @@ qla24xx_configure_vp(scsi_qla_host_t *vha) void qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb) { - scsi_qla_host_t *vha; + scsi_qla_host_t *vha, *tvha; struct qla_hw_data *ha = rsp->hw; int i = 0; - list_for_each_entry(vha, &ha->vp_list, list) { + list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) { if (vha->vp_idx) { switch (mb[0]) { case MBA_LIP_OCCURRED: @@ -300,6 +301,7 @@ qla2x00_do_dpc_all_vps(scsi_qla_host_t *vha) int ret; struct qla_hw_data *ha = vha->hw; scsi_qla_host_t *vp; + struct scsi_qla_host *tvp; if (vha->vp_idx) return; @@ -308,7 +310,7 @@ qla2x00_do_dpc_all_vps(scsi_qla_host_t *vha) clear_bit(VP_DPC_NEEDED, &vha->dpc_flags); - list_for_each_entry(vp, &ha->vp_list, list) { + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) { if (vp->vp_idx) ret = qla2x00_do_dpc_vp(vp); } -- cgit v1.2.3 From c6b2fca8205dc33e3bb444835769e4ea4c6bc58d Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 5 Mar 2009 11:07:03 -0800 Subject: [SCSI] qla2xxx: Correct truncation in return-code status checking. QLA_* return codes are 'int' in size. There were still several legacy check-points which assumed a return-code width of 8-bits. This could cause incorrect assumptions of 'good' status if a return of QLA_FUNCTION_TIMEOUT. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 2 +- drivers/scsi/qla2xxx/qla_os.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index e54ab2f10795..87f9abc71460 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3435,7 +3435,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) static int qla2x00_restart_isp(scsi_qla_host_t *vha) { - uint8_t status = 0; + int status = 0; uint32_t wait_time; struct qla_hw_data *ha = vha->hw; struct req_que *req = ha->req_q_map[0]; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 2f5f72531e23..16c34760b95d 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2568,7 +2568,7 @@ qla2x00_do_work(struct scsi_qla_host *vha) void qla2x00_relogin(struct scsi_qla_host *vha) { fc_port_t *fcport; - uint8_t status; + int status; uint16_t next_loopid = 0; struct qla_hw_data *ha = vha->hw; -- cgit v1.2.3 From ca42f2b5f58702e5751e1423bd2f7987b0760eab Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 5 Mar 2009 11:07:04 -0800 Subject: [SCSI] qla2xxx: Correct overwrite of pre-assigned init-control-block structure size. The value is already pre-assigned prior to the qla2x00_mem_alloc(). Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 16c34760b95d..3ddfa889e949 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2222,10 +2222,6 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, { char name[16]; - ha->init_cb_size = sizeof(init_cb_t); - if (IS_QLA2XXX_MIDTYPE(ha)) - ha->init_cb_size = sizeof(struct mid_init_cb_24xx); - ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, ha->init_cb_size, &ha->init_cb_dma, GFP_KERNEL); if (!ha->init_cb) -- cgit v1.2.3 From 5fa0ae19822d60307059ee64b80ba9e5effdce58 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 5 Mar 2009 11:07:05 -0800 Subject: [SCSI] qla2xxx: Update version number to 8.03.00-k4. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 79f7053da99b..a772eab2f0ea 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.00-k3" +#define QLA2XXX_VERSION "8.03.00-k4" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 -- cgit v1.2.3 From b70d11da61d751ad968c6f686d83ac1b0ae41466 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristian=20H=C3=B8gsberg?= Date: Tue, 3 Mar 2009 14:45:57 -0500 Subject: drm: Return EINVAL on duplicate objects in execbuffer object list MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If userspace passes an object list with the same object appearing more than once, we end up hitting the BUG_ON() in i915_gem_object_set_to_gpu_domain() as it gets called a second time for the same object. Signed-off-by: Kristian Høgsberg Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 6 ++++++ drivers/gpu/drm/i915/i915_gem.c | 17 ++++++++++++++++- 2 files changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 17fa40858d26..9186d43be011 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -457,6 +457,12 @@ struct drm_i915_gem_object { /** for phy allocated objects */ struct drm_i915_gem_phys_object *phys_obj; + + /** + * Used for checking the object doesn't appear more than once + * in an execbuffer object list. + */ + int in_execbuffer; }; /** diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 85685bfd12da..7bdcc752f139 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2469,6 +2469,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, struct drm_i915_gem_exec_object *exec_list = NULL; struct drm_gem_object **object_list = NULL; struct drm_gem_object *batch_obj; + struct drm_i915_gem_object *obj_priv; int ret, i, pinned = 0; uint64_t exec_offset; uint32_t seqno, flush_domains; @@ -2533,6 +2534,15 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, ret = -EBADF; goto err; } + + obj_priv = object_list[i]->driver_private; + if (obj_priv->in_execbuffer) { + DRM_ERROR("Object %p appears more than once in object list\n", + object_list[i]); + ret = -EBADF; + goto err; + } + obj_priv->in_execbuffer = true; } /* Pin and relocate */ @@ -2674,8 +2684,13 @@ err: for (i = 0; i < pinned; i++) i915_gem_object_unpin(object_list[i]); - for (i = 0; i < args->buffer_count; i++) + for (i = 0; i < args->buffer_count; i++) { + if (object_list[i]) { + obj_priv = object_list[i]->driver_private; + obj_priv->in_execbuffer = false; + } drm_gem_object_unreference(object_list[i]); + } mutex_unlock(&dev->struct_mutex); -- cgit v1.2.3 From 0fce81e3ccd093f4826de40fbd27fac9632f6170 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Sat, 28 Feb 2009 15:01:16 -0500 Subject: i915: add newline to i915_gem_object_pin failure msg Prevents formatting nasty as below: [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 Signed-off-by: Kyle McMartin Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 7bdcc752f139..c94069b28a47 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2727,7 +2727,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment) ret = i915_gem_object_bind_to_gtt(obj, alignment); if (ret != 0) { if (ret != -EBUSY && ret != -ERESTARTSYS) - DRM_ERROR("Failure to bind: %d", ret); + DRM_ERROR("Failure to bind: %d\n", ret); return ret; } /* -- cgit v1.2.3 From 66824bd7b5dc22da367595359bfcd1149c4ce92a Mon Sep 17 00:00:00 2001 From: Pierre Willenbrock Date: Wed, 25 Feb 2009 17:49:51 +0100 Subject: drm/i915: Don't restore palettes through VGA registers. The VGA registers just hit the pipe registers that we already set through MMIO. This fixes strange colors on resume. Signed-off-by: Pierre Willenbrock Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 1 - drivers/gpu/drm/i915/i915_suspend.c | 11 ----------- 2 files changed, 12 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 9186d43be011..d6cc9861e0a1 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -279,7 +279,6 @@ typedef struct drm_i915_private { u8 saveAR_INDEX; u8 saveAR[21]; u8 saveDACMASK; - u8 saveDACDATA[256*3]; /* 256 3-byte colors */ u8 saveCR[37]; struct { diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 5d84027ee8f3..d669cc2b42c0 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -119,11 +119,6 @@ static void i915_save_vga(struct drm_device *dev) /* VGA color palette registers */ dev_priv->saveDACMASK = I915_READ8(VGA_DACMASK); - /* DACCRX automatically increments during read */ - I915_WRITE8(VGA_DACRX, 0); - /* Read 3 bytes of color data from each index */ - for (i = 0; i < 256 * 3; i++) - dev_priv->saveDACDATA[i] = I915_READ8(VGA_DACDATA); /* MSR bits */ dev_priv->saveMSR = I915_READ8(VGA_MSR_READ); @@ -225,12 +220,6 @@ static void i915_restore_vga(struct drm_device *dev) /* VGA color palette registers */ I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK); - /* DACCRX automatically increments during read */ - I915_WRITE8(VGA_DACWX, 0); - /* Read 3 bytes of color data from each index */ - for (i = 0; i < 256 * 3; i++) - I915_WRITE8(VGA_DACDATA, dev_priv->saveDACDATA[i]); - } int i915_save_state(struct drm_device *dev) -- cgit v1.2.3 From 040aefa263aa9cd7bd5df50586c35e1e15e77f84 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 10 Mar 2009 12:31:12 -0700 Subject: drm/i915: Fix bad \n in MTRR failure notice. Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 6dab63bdc4c1..6d21b9e48b89 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1105,7 +1105,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) 1024 * 1024, MTRR_TYPE_WRCOMB, 1); if (dev_priv->mm.gtt_mtrr < 0) { - DRM_INFO("MTRR allocation failed\n. Graphics " + DRM_INFO("MTRR allocation failed. Graphics " "performance may suffer.\n"); } -- cgit v1.2.3 From 187cfc439f7b1a7c91ff72d561b2a7c9c0b83431 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 9 Mar 2009 14:36:15 +0000 Subject: hvc_console: Remove tty->low_latency on pseries backends The hvcs and hvsi backends both set tty->low_latency to one, along with more or less scary comments regarding bugs or races that would happen if not doing so. However, they also both call tty_flip_buffer_push() in conexts where it's illegal to do so since some recent tty changes (or at least it may have been illegal always but it nows blows) when low_latency is set (ie, hard interrupt or with spinlock held and irqs disabled). This removes the setting for now to get them back to working condition, we'll have to address the races described in the comments separately if they are still an issue (some of this might have been fixed already). Signed-off-by: Benjamin Herrenschmidt --- drivers/char/hvcs.c | 9 --------- drivers/char/hvsi.c | 1 - 2 files changed, 10 deletions(-) diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c index 6e6eb445d374..c76bccf5354d 100644 --- a/drivers/char/hvcs.c +++ b/drivers/char/hvcs.c @@ -1139,15 +1139,6 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp) hvcsd->tty = tty; tty->driver_data = hvcsd; - /* - * Set this driver to low latency so that we actually have a chance at - * catching a throttled TTY after we flip_buffer_push. Otherwise the - * flush_to_async may not execute until after the kernel_thread has - * yielded and resumed the next flip_buffer_push resulting in data - * loss. - */ - tty->low_latency = 1; - memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN); /* diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c index 406f8742a260..2989056a9e39 100644 --- a/drivers/char/hvsi.c +++ b/drivers/char/hvsi.c @@ -810,7 +810,6 @@ static int hvsi_open(struct tty_struct *tty, struct file *filp) hp = &hvsi_ports[line]; tty->driver_data = hp; - tty->low_latency = 1; /* avoid throttle/tty_flip_buffer_push race */ mb(); if (hp->state == HVSI_FSP_DIED) -- cgit v1.2.3 From d801cec70d69d2d4121e133edd5c3237fe0e0078 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 11 Mar 2009 10:45:17 +1100 Subject: radeonfb/aty128fb: Disable broken early resume hook for PowerBooks radeonfb and aty128fb have a special hook called by the PowerMac platform code very very early on resume from sleep to bring the screen back. This is useful for debugging wakup problems, but unfortunately, this also became a source of problems of its own. The hook is called extremely early, with interrupts still off, and the code path involved with that code nowadays rely on things like taking mutexes, GFP_KERNEL allocations, etc... In addition, the driver now relies on the PCI core to restore the standard config space before calling resume which doesn't happen with this early code path. I'm keeping the code in but commented out along with a fixup call to pci_restore_state(). The reason is that I still want to make it easy to re-enable temporarily to track wake up problems, and it's possible that I can revive it at some stage if we make sleeping things save to call in early resume using a system state. In the meantime, this should fix several reported regressions. Signed-off-by: Benjamin Herrenschmidt --- drivers/video/aty/aty128fb.c | 10 +++++++++- drivers/video/aty/radeon_pm.c | 10 +++++++++- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index 2181ce4d7ebd..35e8eb02b9e9 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -1853,13 +1853,14 @@ static void aty128_bl_exit(struct backlight_device *bd) * Initialisation */ -#ifdef CONFIG_PPC_PMAC +#ifdef CONFIG_PPC_PMAC__disabled static void aty128_early_resume(void *data) { struct aty128fb_par *par = data; if (try_acquire_console_sem()) return; + pci_restore_state(par->pdev); aty128_do_resume(par->pdev); release_console_sem(); } @@ -1907,7 +1908,14 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i /* Indicate sleep capability */ if (par->chip_gen == rage_M3) { pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1); +#if 0 /* Disable the early video resume hack for now as it's causing problems, among + * others we now rely on the PCI core restoring the config space for us, which + * isn't the case with that hack, and that code path causes various things to + * be called with interrupts off while they shouldn't. I'm leaving the code in + * as it can be useful for debugging purposes + */ pmac_set_early_video_resume(aty128_early_resume, par); +#endif } /* Find default mode */ diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index ca5f0dc28546..81603f85e17e 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -2762,12 +2762,13 @@ int radeonfb_pci_resume(struct pci_dev *pdev) return rc; } -#ifdef CONFIG_PPC_OF +#ifdef CONFIG_PPC_OF__disabled static void radeonfb_early_resume(void *data) { struct radeonfb_info *rinfo = data; rinfo->no_schedule = 1; + pci_restore_state(rinfo->pdev); radeonfb_pci_resume(rinfo->pdev); rinfo->no_schedule = 0; } @@ -2834,7 +2835,14 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlis */ if (rinfo->pm_mode != radeon_pm_none) { pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, rinfo->of_node, 0, 1); +#if 0 /* Disable the early video resume hack for now as it's causing problems, among + * others we now rely on the PCI core restoring the config space for us, which + * isn't the case with that hack, and that code path causes various things to + * be called with interrupts off while they shouldn't. I'm leaving the code in + * as it can be useful for debugging purposes + */ pmac_set_early_video_resume(radeonfb_early_resume, rinfo); +#endif } #if 0 -- cgit v1.2.3 From eb9b55ab4d73280597fd183b367d50452f4d7846 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 10 Mar 2009 20:33:16 -0400 Subject: SUNRPC: Tighten up the task locking rules in __rpc_execute() We should probably not be testing any flags after we've cleared the RPC_TASK_RUNNING flag, since rpc_make_runnable() is then free to assign the rpc_task to another workqueue, which may then destroy it. We can fix any races with rpc_make_runnable() by ensuring that we only clear the RPC_TASK_RUNNING flag while holding the rpc_wait_queue->lock that the task is supposed to be sleeping on (and then checking whether or not the task really is sleeping). Signed-off-by: Trond Myklebust --- net/sunrpc/sched.c | 33 ++++++++++++++++++++------------- 1 file changed, 20 insertions(+), 13 deletions(-) diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index 385f427bedad..ff50a0546865 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -293,11 +293,6 @@ static void rpc_make_runnable(struct rpc_task *task) rpc_clear_queued(task); if (rpc_test_and_set_running(task)) return; - /* We might have raced */ - if (RPC_IS_QUEUED(task)) { - rpc_clear_running(task); - return; - } if (RPC_IS_ASYNC(task)) { int status; @@ -607,7 +602,9 @@ void rpc_release_calldata(const struct rpc_call_ops *ops, void *calldata) */ static void __rpc_execute(struct rpc_task *task) { - int status = 0; + struct rpc_wait_queue *queue; + int task_is_async = RPC_IS_ASYNC(task); + int status = 0; dprintk("RPC: %5u __rpc_execute flags=0x%x\n", task->tk_pid, task->tk_flags); @@ -647,15 +644,25 @@ static void __rpc_execute(struct rpc_task *task) */ if (!RPC_IS_QUEUED(task)) continue; - rpc_clear_running(task); - if (RPC_IS_ASYNC(task)) { - /* Careful! we may have raced... */ - if (RPC_IS_QUEUED(task)) - return; - if (rpc_test_and_set_running(task)) - return; + /* + * The queue->lock protects against races with + * rpc_make_runnable(). + * + * Note that once we clear RPC_TASK_RUNNING on an asynchronous + * rpc_task, rpc_make_runnable() can assign it to a + * different workqueue. We therefore cannot assume that the + * rpc_task pointer may still be dereferenced. + */ + queue = task->tk_waitqueue; + spin_lock_bh(&queue->lock); + if (!RPC_IS_QUEUED(task)) { + spin_unlock_bh(&queue->lock); continue; } + rpc_clear_running(task); + spin_unlock_bh(&queue->lock); + if (task_is_async) + return; /* sync task: sleep here */ dprintk("RPC: %5u sync task going to sleep\n", task->tk_pid); -- cgit v1.2.3 From ef95d31e6de6be9602ce950b85fb7ab8af46ae42 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 10 Mar 2009 20:33:17 -0400 Subject: NFS: Fix misparsing of nfsv4 fs_locations attribute (take 2) The changeset ea31a4437c59219bf3ea946d58984b01a45a289c (nfs: Fix misparsing of nfsv4 fs_locations attribute) causes the mountpath that is calculated at the beginning of try_location() to be clobbered when we later strncpy a non-nul terminated hostname using an incorrect buffer length. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4namespace.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c index 30befc39b3c6..2a2a0a7143ad 100644 --- a/fs/nfs/nfs4namespace.c +++ b/fs/nfs/nfs4namespace.c @@ -21,7 +21,9 @@ #define NFSDBG_FACILITY NFSDBG_VFS /* - * Check if fs_root is valid + * Convert the NFSv4 pathname components into a standard posix path. + * + * Note that the resulting string will be placed at the end of the buffer */ static inline char *nfs4_pathname_string(const struct nfs4_pathname *pathname, char *buffer, ssize_t buflen) @@ -99,21 +101,20 @@ static struct vfsmount *try_location(struct nfs_clone_mount *mountdata, { struct vfsmount *mnt = ERR_PTR(-ENOENT); char *mnt_path; - int page2len; + unsigned int maxbuflen; unsigned int s; mnt_path = nfs4_pathname_string(&location->rootpath, page2, PAGE_SIZE); if (IS_ERR(mnt_path)) return mnt; mountdata->mnt_path = mnt_path; - page2 += strlen(mnt_path) + 1; - page2len = PAGE_SIZE - strlen(mnt_path) - 1; + maxbuflen = mnt_path - 1 - page2; for (s = 0; s < location->nservers; s++) { const struct nfs4_string *buf = &location->servers[s]; struct sockaddr_storage addr; - if (buf->len <= 0 || buf->len >= PAGE_SIZE) + if (buf->len <= 0 || buf->len >= maxbuflen) continue; mountdata->addr = (struct sockaddr *)&addr; @@ -126,8 +127,8 @@ static struct vfsmount *try_location(struct nfs_clone_mount *mountdata, continue; nfs_set_port(mountdata->addr, NFS_PORT); - strncpy(page2, buf->data, page2len); - page2[page2len] = '\0'; + memcpy(page2, buf->data, buf->len); + page2[buf->len] = '\0'; mountdata->hostname = page2; snprintf(page, PAGE_SIZE, "%s:%s", -- cgit v1.2.3 From ae46141ff08f1965b17c531b571953c39ce8b9e2 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 10 Mar 2009 20:33:18 -0400 Subject: NFSv3: Fix posix ACL code Fix a memory leak due to allocation in the XDR layer. In cases where the RPC call needs to be retransmitted, we end up allocating new pages without clearing the old ones. Fix this by moving the allocation into nfs3_proc_setacls(). Also fix an issue discovered by Kevin Rudd, whereby the amount of memory reserved for the acls in the xdr_buf->head was miscalculated, and causing corruption. Signed-off-by: Trond Myklebust --- fs/nfs/nfs3acl.c | 27 +++++++++++++++++++++------ fs/nfs/nfs3xdr.c | 34 +++++++++++++--------------------- include/linux/nfs_xdr.h | 2 ++ include/linux/nfsacl.h | 3 +++ 4 files changed, 39 insertions(+), 27 deletions(-) diff --git a/fs/nfs/nfs3acl.c b/fs/nfs/nfs3acl.c index cef62557c87d..6bbf0e6daad2 100644 --- a/fs/nfs/nfs3acl.c +++ b/fs/nfs/nfs3acl.c @@ -292,7 +292,7 @@ static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl, { struct nfs_server *server = NFS_SERVER(inode); struct nfs_fattr fattr; - struct page *pages[NFSACL_MAXPAGES] = { }; + struct page *pages[NFSACL_MAXPAGES]; struct nfs3_setaclargs args = { .inode = inode, .mask = NFS_ACL, @@ -303,7 +303,7 @@ static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl, .rpc_argp = &args, .rpc_resp = &fattr, }; - int status, count; + int status; status = -EOPNOTSUPP; if (!nfs_server_capable(inode, NFS_CAP_ACLS)) @@ -319,6 +319,20 @@ static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl, if (S_ISDIR(inode->i_mode)) { args.mask |= NFS_DFACL; args.acl_default = dfacl; + args.len = nfsacl_size(acl, dfacl); + } else + args.len = nfsacl_size(acl, NULL); + + if (args.len > NFS_ACL_INLINE_BUFSIZE) { + unsigned int npages = 1 + ((args.len - 1) >> PAGE_SHIFT); + + status = -ENOMEM; + do { + args.pages[args.npages] = alloc_page(GFP_KERNEL); + if (args.pages[args.npages] == NULL) + goto out_freepages; + args.npages++; + } while (args.npages < npages); } dprintk("NFS call setacl\n"); @@ -329,10 +343,6 @@ static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl, nfs_zap_acl_cache(inode); dprintk("NFS reply setacl: %d\n", status); - /* pages may have been allocated at the xdr layer. */ - for (count = 0; count < NFSACL_MAXPAGES && args.pages[count]; count++) - __free_page(args.pages[count]); - switch (status) { case 0: status = nfs_refresh_inode(inode, &fattr); @@ -346,6 +356,11 @@ static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl, case -ENOTSUPP: status = -EOPNOTSUPP; } +out_freepages: + while (args.npages != 0) { + args.npages--; + __free_page(args.pages[args.npages]); + } out: return status; } diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c index 11cdddec1432..6cdeacffde46 100644 --- a/fs/nfs/nfs3xdr.c +++ b/fs/nfs/nfs3xdr.c @@ -82,8 +82,10 @@ #define NFS3_commitres_sz (1+NFS3_wcc_data_sz+2) #define ACL3_getaclargs_sz (NFS3_fh_sz+1) -#define ACL3_setaclargs_sz (NFS3_fh_sz+1+2*(2+5*3)) -#define ACL3_getaclres_sz (1+NFS3_post_op_attr_sz+1+2*(2+5*3)) +#define ACL3_setaclargs_sz (NFS3_fh_sz+1+ \ + XDR_QUADLEN(NFS_ACL_INLINE_BUFSIZE)) +#define ACL3_getaclres_sz (1+NFS3_post_op_attr_sz+1+ \ + XDR_QUADLEN(NFS_ACL_INLINE_BUFSIZE)) #define ACL3_setaclres_sz (1+NFS3_post_op_attr_sz) /* @@ -703,28 +705,18 @@ nfs3_xdr_setaclargs(struct rpc_rqst *req, __be32 *p, struct nfs3_setaclargs *args) { struct xdr_buf *buf = &req->rq_snd_buf; - unsigned int base, len_in_head, len = nfsacl_size( - (args->mask & NFS_ACL) ? args->acl_access : NULL, - (args->mask & NFS_DFACL) ? args->acl_default : NULL); - int count, err; + unsigned int base; + int err; p = xdr_encode_fhandle(p, NFS_FH(args->inode)); *p++ = htonl(args->mask); - base = (char *)p - (char *)buf->head->iov_base; - /* put as much of the acls into head as possible. */ - len_in_head = min_t(unsigned int, buf->head->iov_len - base, len); - len -= len_in_head; - req->rq_slen = xdr_adjust_iovec(req->rq_svec, p + (len_in_head >> 2)); - - for (count = 0; (count << PAGE_SHIFT) < len; count++) { - args->pages[count] = alloc_page(GFP_KERNEL); - if (!args->pages[count]) { - while (count) - __free_page(args->pages[--count]); - return -ENOMEM; - } - } - xdr_encode_pages(buf, args->pages, 0, len); + req->rq_slen = xdr_adjust_iovec(req->rq_svec, p); + base = req->rq_slen; + + if (args->npages != 0) + xdr_encode_pages(buf, args->pages, 0, args->len); + else + req->rq_slen += args->len; err = nfsacl_encode(buf, base, args->inode, (args->mask & NFS_ACL) ? diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index a550b528319f..2e5f00066afd 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -406,6 +406,8 @@ struct nfs3_setaclargs { int mask; struct posix_acl * acl_access; struct posix_acl * acl_default; + size_t len; + unsigned int npages; struct page ** pages; }; diff --git a/include/linux/nfsacl.h b/include/linux/nfsacl.h index 54487a99beb8..43011b69297c 100644 --- a/include/linux/nfsacl.h +++ b/include/linux/nfsacl.h @@ -37,6 +37,9 @@ #define NFSACL_MAXPAGES ((2*(8+12*NFS_ACL_MAX_ENTRIES) + PAGE_SIZE-1) \ >> PAGE_SHIFT) +#define NFS_ACL_MAX_ENTRIES_INLINE (5) +#define NFS_ACL_INLINE_BUFSIZE ((2*(2+3*NFS_ACL_MAX_ENTRIES_INLINE)) << 2) + static inline unsigned int nfsacl_size(struct posix_acl *acl_access, struct posix_acl *acl_default) { -- cgit v1.2.3 From 78851e1aa4c3b796d5f0bb11b445016726302b44 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Tue, 10 Mar 2009 20:33:19 -0400 Subject: NLM: Shrink the IPv4-only version of nlm_cmp_addr() Clean up/micro-optimatization: Make the AF_INET-only version of nlm_cmp_addr() smaller. This matches the style of nlm_privileged_requester(), and makes the AF_INET-only version of nlm_cmp_addr() nearly the same size as it was before IPv6 support. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/lockd/lockd.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index aa6fe7026de7..51855dfd8adb 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -346,6 +346,7 @@ static inline int __nlm_cmp_addr4(const struct sockaddr *sap1, return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr; } +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) static inline int __nlm_cmp_addr6(const struct sockaddr *sap1, const struct sockaddr *sap2) { @@ -353,6 +354,13 @@ static inline int __nlm_cmp_addr6(const struct sockaddr *sap1, const struct sockaddr_in6 *sin2 = (const struct sockaddr_in6 *)sap2; return ipv6_addr_equal(&sin1->sin6_addr, &sin2->sin6_addr); } +#else /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */ +static inline int __nlm_cmp_addr6(const struct sockaddr *sap1, + const struct sockaddr *sap2) +{ + return 0; +} +#endif /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */ /* * Compare two host addresses -- cgit v1.2.3 From 57df675c60c5cf0748ddba9c7f85afde1530d74d Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Tue, 10 Mar 2009 20:33:20 -0400 Subject: NLM: Fix GRANT callback address comparison when IPv6 is enabled The NFS mount command may pass an AF_INET server address to lockd. If lockd happens to be using a PF_INET6 listener, the nlm_cmp_addr() in nlmclnt_grant() will fail to match requests from that host because they will all have a mapped IPv4 AF_INET6 address. Adopt the same solution used in nfs_sockaddr_match_ipaddr() for NFSv4 callbacks: if either address is AF_INET, map it to an AF_INET6 address before doing the comparison. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/lockd/clntlock.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-) diff --git a/fs/lockd/clntlock.c b/fs/lockd/clntlock.c index 1f3b0fc0d351..aedc47a264c1 100644 --- a/fs/lockd/clntlock.c +++ b/fs/lockd/clntlock.c @@ -139,6 +139,55 @@ int nlmclnt_block(struct nlm_wait *block, struct nlm_rqst *req, long timeout) return 0; } +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) +static const struct in6_addr *nlmclnt_map_v4addr(const struct sockaddr *sap, + struct in6_addr *addr_mapped) +{ + const struct sockaddr_in *sin = (const struct sockaddr_in *)sap; + + switch (sap->sa_family) { + case AF_INET6: + return &((const struct sockaddr_in6 *)sap)->sin6_addr; + case AF_INET: + ipv6_addr_set_v4mapped(sin->sin_addr.s_addr, addr_mapped); + return addr_mapped; + } + + return NULL; +} + +/* + * If lockd is using a PF_INET6 listener, all incoming requests appear + * to come from AF_INET6 remotes. The address of AF_INET remotes are + * mapped to AF_INET6 automatically by the network layer. In case the + * user passed an AF_INET server address at mount time, ensure both + * addresses are AF_INET6 before comparing them. + */ +static int nlmclnt_cmp_addr(const struct nlm_host *host, + const struct sockaddr *sap) +{ + const struct in6_addr *addr1; + const struct in6_addr *addr2; + struct in6_addr addr1_mapped; + struct in6_addr addr2_mapped; + + addr1 = nlmclnt_map_v4addr(nlm_addr(host), &addr1_mapped); + if (likely(addr1 != NULL)) { + addr2 = nlmclnt_map_v4addr(sap, &addr2_mapped); + if (likely(addr2 != NULL)) + return ipv6_addr_equal(addr1, addr2); + } + + return 0; +} +#else /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */ +static int nlmclnt_cmp_addr(const struct nlm_host *host, + const struct sockaddr *sap) +{ + return nlm_cmp_addr(nlm_addr(host), sap); +} +#endif /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */ + /* * The server lockd has called us back to tell us the lock was granted */ @@ -166,7 +215,7 @@ __be32 nlmclnt_grant(const struct sockaddr *addr, const struct nlm_lock *lock) */ if (fl_blocked->fl_u.nfs_fl.owner->pid != lock->svid) continue; - if (!nlm_cmp_addr(nlm_addr(block->b_host), addr)) + if (!nlmclnt_cmp_addr(block->b_host, addr)) continue; if (nfs_compare_fh(NFS_FH(fl_blocked->fl_file->f_path.dentry->d_inode) ,fh) != 0) continue; -- cgit v1.2.3 From a71ee337b31271e701f689d544b6153b75609bc5 Mon Sep 17 00:00:00 2001 From: Suresh Jayaraman Date: Tue, 10 Mar 2009 20:33:21 -0400 Subject: NFS: Handle -ESTALE error in access() Hi Trond, I have been looking at a bugreport where trying to open applications on KDE on a NFS mounted home fails temporarily. There have been multiple reports on different kernel versions pointing to this common issue: http://bugzilla.kernel.org/show_bug.cgi?id=12557 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/269954 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508866.html This issue can be reproducible consistently by doing this on a NFS mounted home (KDE): 1. Open 2 xterm sessions 2. From one of the xterm session, do "ssh -X " 3. "stat ~/.Xauthority" on the remote SSH session 4. Close the two xterm sessions 5. On the server do a "stat ~/.Xauthority" 6. Now on the client, try to open xterm This will fail. Even if the filehandle had become stale, the NFS client should invalidate the cache/inode and should repeat LOOKUP. Looking at the packet capture when the failure occurs shows that there were two subsequent ACCESS() calls with the same filehandle and both fails with -ESTALE error. I have tested the fix below. Now the client issue a LOOKUP after the ACCESS() call fails with -ESTALE. If all this makes sense to you, can you consider this for inclusion? Thanks, If the server returns an -ESTALE error due to stale filehandle in response to an ACCESS() call, we need to invalidate the cache and inode so that LOOKUP() can be retried. Without this change, the nfs client retries ACCESS() with the same filehandle, fails again and could lead to temporary failure of applications running on nfs mounted home. Signed-off-by: Suresh Jayaraman Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index e35c8199f82f..672368f865ca 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1892,8 +1892,14 @@ static int nfs_do_access(struct inode *inode, struct rpc_cred *cred, int mask) cache.cred = cred; cache.jiffies = jiffies; status = NFS_PROTO(inode)->access(inode, &cache); - if (status != 0) + if (status != 0) { + if (status == -ESTALE) { + nfs_zap_caches(inode); + if (!S_ISDIR(inode->i_mode)) + set_bit(NFS_INO_STALE, &NFS_I(inode)->flags); + } return status; + } nfs_access_add_cache(inode, &cache); out: if ((mask & ~cache.mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) == 0) -- cgit v1.2.3 From d7371c41b0cda782256b1df759df4e8d4724584c Mon Sep 17 00:00:00 2001 From: Ian Dall Date: Tue, 10 Mar 2009 20:33:22 -0400 Subject: Bug 11061, NFS mounts dropped Addresses: http://bugzilla.kernel.org/show_bug.cgi?id=11061 sockaddr structures can't be reliably compared using memcmp() because there are padding bytes in the structure which can't be guaranteed to be the same even when the sockaddr structures refer to the same socket. Instead compare all the relevant fields. In the case of IPv6 sin6_flowinfo is not compared because it only affects QoS and sin6_scope_id is only compared if the address is "link local" because "link local" addresses need only be unique to a specific link. Signed-off-by: Ian Dall Signed-off-by: Trond Myklebust --- fs/nfs/client.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 62 insertions(+), 1 deletion(-) diff --git a/fs/nfs/client.c b/fs/nfs/client.c index 9b728f3565a1..06654b831d19 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -272,6 +272,65 @@ static int nfs_sockaddr_match_ipaddr(const struct sockaddr *sa1, } #endif +/* + * Test if two ip4 socket addresses refer to the same socket, by + * comparing relevant fields. The padding bytes specifically, are + * not compared. + * + * The caller should ensure both socket addresses are AF_INET. + */ +static int nfs_sockaddr_cmp_ip4(const struct sockaddr_in * saddr1, + const struct sockaddr_in * saddr2) +{ + if (saddr1->sin_addr.s_addr != saddr2->sin_addr.s_addr) + return 0; + return saddr1->sin_port == saddr2->sin_port; +} + +/* + * Test if two ip6 socket addresses refer to the same socket by + * comparing relevant fields. The padding bytes specifically, are not + * compared. sin6_flowinfo is not compared because it only affects QoS + * and sin6_scope_id is only compared if the address is "link local" + * because "link local" addresses need only be unique to a specific + * link. Conversely, ordinary unicast addresses might have different + * sin6_scope_id. + * + * The caller should ensure both socket addresses are AF_INET6. + */ +static int nfs_sockaddr_cmp_ip6 (const struct sockaddr_in6 * saddr1, + const struct sockaddr_in6 * saddr2) +{ + if (!ipv6_addr_equal(&saddr1->sin6_addr, + &saddr1->sin6_addr)) + return 0; + if (ipv6_addr_scope(&saddr1->sin6_addr) == IPV6_ADDR_SCOPE_LINKLOCAL && + saddr1->sin6_scope_id != saddr2->sin6_scope_id) + return 0; + return saddr1->sin6_port == saddr2->sin6_port; +} + +/* + * Test if two socket addresses represent the same actual socket, + * by comparing (only) relevant fields. + */ +static int nfs_sockaddr_cmp(const struct sockaddr *sa1, + const struct sockaddr *sa2) +{ + if (sa1->sa_family != sa2->sa_family) + return 0; + + switch (sa1->sa_family) { + case AF_INET: + return nfs_sockaddr_cmp_ip4((const struct sockaddr_in *) sa1, + (const struct sockaddr_in *) sa2); + case AF_INET6: + return nfs_sockaddr_cmp_ip6((const struct sockaddr_in6 *) sa1, + (const struct sockaddr_in6 *) sa2); + } + return 0; +} + /* * Find a client by IP address and protocol version * - returns NULL if no such client @@ -344,8 +403,10 @@ struct nfs_client *nfs_find_client_next(struct nfs_client *clp) static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *data) { struct nfs_client *clp; + const struct sockaddr *sap = data->addr; list_for_each_entry(clp, &nfs_client_list, cl_share_link) { + const struct sockaddr *clap = (struct sockaddr *)&clp->cl_addr; /* Don't match clients that failed to initialise properly */ if (clp->cl_cons_state < 0) continue; @@ -358,7 +419,7 @@ static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *dat continue; /* Match the full socket address */ - if (memcmp(&clp->cl_addr, data->addr, sizeof(clp->cl_addr)) != 0) + if (!nfs_sockaddr_cmp(sap, clap)) continue; atomic_inc(&clp->cl_count); -- cgit v1.2.3 From 260cf8a2cbe022131a4850ea6175ed716dc2663c Mon Sep 17 00:00:00 2001 From: Pantelis Koukousoulas Date: Tue, 10 Mar 2009 13:16:14 +0200 Subject: drm: fix EDID parser problem with positive/negative hsync/vsync Comparing the layouts of struct detail_pixel_timing with x.org's struct detailed_timings and how those are handled, it appears that the hsync_positive and vsync_positive fields are backwards. This patch fixes https://bugs.freedesktop.org/show_bug.cgi?id=20019 for me. It was tested on 2 monitors, LG FLATRON L225WS 22" and a YAKUMO 17" for which more details are unknown. Signed-off-by: Pantelis Koukousoulas Signed-off-by: Dave Airlie --- include/drm/drm_edid.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index ff8d27af4786..a11cc9d32591 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -69,8 +69,8 @@ struct detailed_pixel_timing { u8 hborder; u8 vborder; u8 unknown0:1; - u8 vsync_positive:1; u8 hsync_positive:1; + u8 vsync_positive:1; u8 separate_sync:2; u8 stereo:1; u8 unknown6:1; -- cgit v1.2.3 From 9b2412f9ad0a3913baa40c270d6e1fa3c6d50067 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 11 Feb 2009 14:26:44 +0000 Subject: drm/i915: First recheck for an empty fence register. If we wait upon a request and successfully unbind a buffer occupying a fence register, then that slot will be freed and cause a NULL derefrence upon rescanning. Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index c94069b28a47..6497c1ad02d3 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1580,6 +1580,7 @@ i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write) } /* First try to find a free reg */ +try_again: for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) { reg = &dev_priv->fence_regs[i]; if (!reg->obj) @@ -1591,7 +1592,6 @@ i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write) struct drm_i915_gem_object *old_obj_priv = NULL; loff_t offset; -try_again: /* Could try to use LRU here instead... */ for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) { -- cgit v1.2.3 From 22c344e9a03beeb7071a588a973012749f84a830 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 11 Feb 2009 14:26:45 +0000 Subject: drm/i915: Check fence status on every pin. As we may steal the fence register of an unpinned buffer for another, every time we repin the buffer we need to recheck whether it needs to be allocated a fence. Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6497c1ad02d3..12c7d78d9240 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2730,14 +2730,21 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment) DRM_ERROR("Failure to bind: %d\n", ret); return ret; } - /* - * Pre-965 chips need a fence register set up in order to - * properly handle tiled surfaces. - */ - if (!IS_I965G(dev) && - obj_priv->fence_reg == I915_FENCE_REG_NONE && - obj_priv->tiling_mode != I915_TILING_NONE) - i915_gem_object_get_fence_reg(obj, true); + } + /* + * Pre-965 chips need a fence register set up in order to + * properly handle tiled surfaces. + */ + if (!IS_I965G(dev) && + obj_priv->fence_reg == I915_FENCE_REG_NONE && + obj_priv->tiling_mode != I915_TILING_NONE) { + ret = i915_gem_object_get_fence_reg(obj, true); + if (ret != 0) { + if (ret != -EBUSY && ret != -ERESTARTSYS) + DRM_ERROR("Failure to install fence: %d\n", + ret); + return ret; + } } obj_priv->pin_count++; -- cgit v1.2.3 From fc7170ba281c041852eeda52d4faf5db720c99ce Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 11 Feb 2009 14:26:46 +0000 Subject: drm/i915: Check to see if we've pinned all available fences We need to check and report if there are no available fences - or else we spin endlessly waiting for a buffer to magically unpin itself. Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 12c7d78d9240..2b5c7ad9e64a 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1557,7 +1557,8 @@ i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write) struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; struct drm_i915_fence_reg *reg = NULL; - int i, ret; + struct drm_i915_gem_object *old_obj_priv = NULL; + int i, ret, avail; switch (obj_priv->tiling_mode) { case I915_TILING_NONE: @@ -1581,17 +1582,24 @@ i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write) /* First try to find a free reg */ try_again: + avail = 0; for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) { reg = &dev_priv->fence_regs[i]; if (!reg->obj) break; + + old_obj_priv = reg->obj->driver_private; + if (!old_obj_priv->pin_count) + avail++; } /* None available, try to steal one or wait for a user to finish */ if (i == dev_priv->num_fence_regs) { - struct drm_i915_gem_object *old_obj_priv = NULL; loff_t offset; + if (avail == 0) + return -ENOMEM; + /* Could try to use LRU here instead... */ for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) { -- cgit v1.2.3 From ad3bdefe877afb47480418fdb05ecd42842de65e Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 11 Mar 2009 09:00:04 +0800 Subject: proc: fix kflags to uflags copying in /proc/kpageflags Fix kpf_copy_bit(src,dst) to be kpf_copy_bit(dst,src) to match the actual call patterns, e.g. kpf_copy_bit(kflags, KPF_LOCKED, PG_locked). This misplacement of src/dst only affected reporting of PG_writeback, PG_reclaim and PG_buddy. For others kflags==uflags so not affected. Signed-off-by: Wu Fengguang Reviewed-by: KOSAKI Motohiro Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/proc/page.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/proc/page.c b/fs/proc/page.c index 2d1345112a42..e9983837d08d 100644 --- a/fs/proc/page.c +++ b/fs/proc/page.c @@ -80,7 +80,7 @@ static const struct file_operations proc_kpagecount_operations = { #define KPF_RECLAIM 9 #define KPF_BUDDY 10 -#define kpf_copy_bit(flags, srcpos, dstpos) (((flags >> srcpos) & 1) << dstpos) +#define kpf_copy_bit(flags, dstpos, srcpos) (((flags >> srcpos) & 1) << dstpos) static ssize_t kpageflags_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) -- cgit v1.2.3 From 211b3d03c7400f48a781977a50104c9d12f4e229 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 10 Mar 2009 22:31:03 +0100 Subject: x86: work around Fedora-11 x86-32 kernel failures on Intel Atom CPUs Impact: work around boot crash Work around Intel Atom erratum AAH41 (probabilistically) - it's triggering in the field. Reported-by: Linus Torvalds Tested-by: Kyle McMartin Signed-off-by: Ingo Molnar --- arch/x86/mm/pageattr.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 7be47d1a97e4..7233bd7e357b 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -515,6 +515,17 @@ static int split_large_page(pte_t *kpte, unsigned long address) * primary protection behavior: */ __set_pmd_pte(kpte, address, mk_pte(base, __pgprot(_KERNPG_TABLE))); + + /* + * Intel Atom errata AAH41 workaround. + * + * The real fix should be in hw or in a microcode update, but + * we also probabilistically try to reduce the window of having + * a large TLB mixed with 4K TLBs while instruction fetches are + * going on. + */ + __flush_tlb_all(); + base = NULL; out_unlock: -- cgit v1.2.3 From d7619c4b9c95cc9a2e7f0f4f7ae21165ab5cb1e7 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 11 Feb 2009 14:26:47 +0000 Subject: drm/i915: Protect active fences on i915 The i915 also uses the fence registers for GPU access to tiled buffers so we cannot reallocate one whilst it is on the active list. By performing a LRU scan of the fenced buffers we also avoid waiting the possibility of waiting on a pinned, or otherwise unusable, buffer. Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 38 +++++++++++++++++++++++++++++++------- 1 file changed, 31 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 2b5c7ad9e64a..b0ff5c44e61e 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1595,18 +1595,32 @@ try_again: /* None available, try to steal one or wait for a user to finish */ if (i == dev_priv->num_fence_regs) { + uint32_t seqno = dev_priv->mm.next_gem_seqno; loff_t offset; if (avail == 0) return -ENOMEM; - /* Could try to use LRU here instead... */ for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) { + uint32_t this_seqno; + reg = &dev_priv->fence_regs[i]; old_obj_priv = reg->obj->driver_private; - if (!old_obj_priv->pin_count) + + if (old_obj_priv->pin_count) + continue; + + /* i915 uses fences for GPU access to tiled buffers */ + if (IS_I965G(dev) || !old_obj_priv->active) break; + + /* find the seqno of the first available fence */ + this_seqno = old_obj_priv->last_rendering_seqno; + if (this_seqno != 0 && + reg->obj->write_domain == 0 && + i915_seqno_passed(seqno, this_seqno)) + seqno = this_seqno; } /* @@ -1614,15 +1628,25 @@ try_again: * objects to finish before trying again. */ if (i == dev_priv->num_fence_regs) { - ret = i915_gem_object_set_to_gtt_domain(reg->obj, 0); - if (ret) { - WARN(ret != -ERESTARTSYS, - "switch to GTT domain failed: %d\n", ret); - return ret; + if (seqno == dev_priv->mm.next_gem_seqno) { + i915_gem_flush(dev, + I915_GEM_GPU_DOMAINS, + I915_GEM_GPU_DOMAINS); + seqno = i915_add_request(dev, + I915_GEM_GPU_DOMAINS); + if (seqno == 0) + return -ENOMEM; } + + ret = i915_wait_request(dev, seqno); + if (ret) + return ret; goto try_again; } + BUG_ON(old_obj_priv->active || + (reg->obj->write_domain & I915_GEM_GPU_DOMAINS)); + /* * Zap this virtual mapping so we can set up a fence again * for this object next time we need it. -- cgit v1.2.3 From dc529a4fe1ae4667c819437a94185e8581e1e680 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 10 Mar 2009 22:34:49 -0700 Subject: drm/i915: fix 945 fence register writes for fence 8 and above. The last 8 fence registers sit at a different offset, so when we went to set fence number 8 in the lower offset, we instead set PGETBL_CTL, and the GPU got all sorts of angry at us. fd.o bug #20567. Easily reproducible by running glxgears and killing it about 6 times. Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 21 +++++++++++++++++---- drivers/gpu/drm/i915/i915_reg.h | 1 + 2 files changed, 18 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index b0ff5c44e61e..37427e4016cb 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1476,7 +1476,7 @@ static void i915_write_fence_reg(struct drm_i915_fence_reg *reg) struct drm_i915_gem_object *obj_priv = obj->driver_private; int regnum = obj_priv->fence_reg; int tile_width; - uint32_t val; + uint32_t fence_reg, val; uint32_t pitch_val; if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) || @@ -1503,7 +1503,11 @@ static void i915_write_fence_reg(struct drm_i915_fence_reg *reg) val |= pitch_val << I830_FENCE_PITCH_SHIFT; val |= I830_FENCE_REG_VALID; - I915_WRITE(FENCE_REG_830_0 + (regnum * 4), val); + if (regnum < 8) + fence_reg = FENCE_REG_830_0 + (regnum * 4); + else + fence_reg = FENCE_REG_945_8 + ((regnum - 8) * 4); + I915_WRITE(fence_reg, val); } static void i830_write_fence_reg(struct drm_i915_fence_reg *reg) @@ -1687,8 +1691,17 @@ i915_gem_clear_fence_reg(struct drm_gem_object *obj) if (IS_I965G(dev)) I915_WRITE64(FENCE_REG_965_0 + (obj_priv->fence_reg * 8), 0); - else - I915_WRITE(FENCE_REG_830_0 + (obj_priv->fence_reg * 4), 0); + else { + uint32_t fence_reg; + + if (obj_priv->fence_reg < 8) + fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4; + else + fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg - + 8) * 4; + + I915_WRITE(fence_reg, 0); + } dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL; obj_priv->fence_reg = I915_FENCE_REG_NONE; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 9d6539a868b3..90600d899413 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -184,6 +184,7 @@ * Fence registers */ #define FENCE_REG_830_0 0x2000 +#define FENCE_REG_945_8 0x3000 #define I830_FENCE_START_MASK 0x07f80000 #define I830_FENCE_TILING_Y_SHIFT 12 #define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8) -- cgit v1.2.3 From fba91afbec2c004e2c8733ae9e0ca6998e962c64 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Mar 2009 14:06:41 -0400 Subject: SUNRPC: Fix an Oops due to socket not set up yet... We can Oops in both xs_udp_send_request() and xs_tcp_send_request() if the call to xs_sendpages() returns an error due to the socket not yet being set up. Deal with that situation by returning a new error: ENOTSOCK, so that we know to avoid dereferencing transport->sock. Signed-off-by: Trond Myklebust --- net/sunrpc/xprtsock.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 5cbb404c4cdf..a71fefd61910 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -467,7 +467,7 @@ static int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, int err, sent = 0; if (unlikely(!sock)) - return -ENOTCONN; + return -ENOTSOCK; clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags); if (base != 0) { @@ -594,6 +594,10 @@ static int xs_udp_send_request(struct rpc_task *task) } switch (status) { + case -ENOTSOCK: + status = -ENOTCONN; + /* Should we call xs_close() here? */ + break; case -EAGAIN: xs_nospace(task); break; @@ -693,6 +697,10 @@ static int xs_tcp_send_request(struct rpc_task *task) } switch (status) { + case -ENOTSOCK: + status = -ENOTCONN; + /* Should we call xs_close() here? */ + break; case -EAGAIN: xs_nospace(task); break; -- cgit v1.2.3 From 01d37c428ae080563c0a3bb8bdfa88c65a6891d3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Mar 2009 14:09:39 -0400 Subject: SUNRPC: xprt_connect() don't abort the task if the transport isn't bound If the transport isn't bound, then we should just return ENOTCONN, letting call_connect_status() and/or call_status() deal with retrying. Currently, we appear to abort all pending tasks with an EIO error. Signed-off-by: Trond Myklebust --- net/sunrpc/xprt.c | 2 +- net/sunrpc/xprtsock.c | 13 +++++++++---- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 29e401bb612e..62098d101a1f 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -663,7 +663,7 @@ void xprt_connect(struct rpc_task *task) xprt, (xprt_connected(xprt) ? "is" : "is not")); if (!xprt_bound(xprt)) { - task->tk_status = -EIO; + task->tk_status = -EAGAIN; return; } if (!xprt_lock_write(xprt, task)) diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index a71fefd61910..29c71e645b27 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -577,6 +577,8 @@ static int xs_udp_send_request(struct rpc_task *task) req->rq_svec->iov_base, req->rq_svec->iov_len); + if (!xprt_bound(xprt)) + return -ENOTCONN; status = xs_sendpages(transport->sock, xs_addr(xprt), xprt->addrlen, xdr, @@ -1531,7 +1533,7 @@ static void xs_udp_connect_worker4(struct work_struct *work) struct socket *sock = transport->sock; int err, status = -EIO; - if (xprt->shutdown || !xprt_bound(xprt)) + if (xprt->shutdown) goto out; /* Start by resetting any existing state */ @@ -1572,7 +1574,7 @@ static void xs_udp_connect_worker6(struct work_struct *work) struct socket *sock = transport->sock; int err, status = -EIO; - if (xprt->shutdown || !xprt_bound(xprt)) + if (xprt->shutdown) goto out; /* Start by resetting any existing state */ @@ -1656,6 +1658,9 @@ static int xs_tcp_finish_connecting(struct rpc_xprt *xprt, struct socket *sock) write_unlock_bh(&sk->sk_callback_lock); } + if (!xprt_bound(xprt)) + return -ENOTCONN; + /* Tell the socket layer to start connecting... */ xprt->stat.connect_count++; xprt->stat.connect_start = jiffies; @@ -1676,7 +1681,7 @@ static void xs_tcp_connect_worker4(struct work_struct *work) struct socket *sock = transport->sock; int err, status = -EIO; - if (xprt->shutdown || !xprt_bound(xprt)) + if (xprt->shutdown) goto out; if (!sock) { @@ -1736,7 +1741,7 @@ static void xs_tcp_connect_worker6(struct work_struct *work) struct socket *sock = transport->sock; int err, status = -EIO; - if (xprt->shutdown || !xprt_bound(xprt)) + if (xprt->shutdown) goto out; if (!sock) { -- cgit v1.2.3 From 3a95ea1155c5d44aa58dde2f64f0ddafe27fd1fb Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 12 Mar 2009 02:03:23 +0900 Subject: Fix _fat_bmap() locking On swapon() path, it has already i_mutex. So, this uses i_alloc_sem instead of it. Signed-off-by: OGAWA Hirofumi Reported-by: Laurent GUERBY Signed-off-by: Linus Torvalds --- fs/fat/inode.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/fat/inode.c b/fs/fat/inode.c index 6b74d09adbe5..de0004fe6e00 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -202,9 +202,9 @@ static sector_t _fat_bmap(struct address_space *mapping, sector_t block) sector_t blocknr; /* fat_get_cluster() assumes the requested blocknr isn't truncated. */ - mutex_lock(&mapping->host->i_mutex); + down_read(&mapping->host->i_alloc_sem); blocknr = generic_block_bmap(mapping, block, fat_get_block); - mutex_unlock(&mapping->host->i_mutex); + up_read(&mapping->host->i_alloc_sem); return blocknr; } -- cgit v1.2.3 From c189846ecf900cd6b3ad7d3cef5b45a746ce646b Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Mon, 9 Mar 2009 09:45:12 +0800 Subject: MIPS: Fix build of non-CONFIG_SYSVIPC version of sys_32_ipc Signed-off-by: Xiaotian Feng Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 2f8452b404c7..1a86f84fa947 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -235,7 +235,7 @@ SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third, #else SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third, - u32, ptr, u32 fifth) + u32, ptr, u32, fifth) { return -ENOSYS; } -- cgit v1.2.3 From a644b2774d41409519bb33a16bd577cb41bb3095 Mon Sep 17 00:00:00 2001 From: Shinya Kuribayashi Date: Tue, 3 Mar 2009 18:05:51 +0900 Subject: MIPS: NEC VR5500 processor support fixup Current VR5500 processor support lacks of some functions which are expected to be configured/synthesized on arch initialization. Here're some VR5500A spec notes: * All execution hazards are handled in hardware. * Once VR5500A stops the operation of the pipeline by WAIT instruction, it could return from the standby mode only when either a reset, NMI request, or all enabled interrupts is/are detected. In other words, if interrupts are disabled by Status.IE=0, it keeps in standby mode even when interrupts are internally asserted. Notes on WAIT: The operation of the processor is undefined if WAIT insn is in the branch delay slot. The operation is also undefined if WAIT insn is executed when Status.EXL and Status.ERL are set to 1. * VR5500A core only implements the Load prefetch. With these changes, it boots fine. Signed-off-by: Shinya Kuribayashi Signed-off-by: Ralf Baechle --- arch/mips/include/asm/hazards.h | 3 ++- arch/mips/include/asm/prefetch.h | 2 +- arch/mips/kernel/cpu-probe.c | 1 + arch/mips/mm/page.c | 3 ++- arch/mips/mm/tlbex.c | 1 + 5 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h index 43baed16a109..134e1fc8f4d6 100644 --- a/arch/mips/include/asm/hazards.h +++ b/arch/mips/include/asm/hazards.h @@ -138,7 +138,8 @@ do { \ __instruction_hazard(); \ } while (0) -#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) +#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ + defined(CONFIG_CPU_R5500) /* * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. diff --git a/arch/mips/include/asm/prefetch.h b/arch/mips/include/asm/prefetch.h index 17850834ccb0..a56594f360ee 100644 --- a/arch/mips/include/asm/prefetch.h +++ b/arch/mips/include/asm/prefetch.h @@ -26,7 +26,7 @@ * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in * current versions due to erratum G105. * - * VR7701 only implements the Load prefetch. + * VR5500 (including VR5701 and VR7701) only implement load prefetch. * * Finally MIPS32 and MIPS64 implement all of the following hints. */ diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index a7162a4484cf..1bdbcad3bb74 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -149,6 +149,7 @@ void __init check_wait(void) case CPU_R4650: case CPU_R4700: case CPU_R5000: + case CPU_R5500: case CPU_NEVADA: case CPU_4KC: case CPU_4KEC: diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index 1417c6494858..48060c635acd 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -172,8 +172,9 @@ static void __cpuinit set_prefetch_parameters(void) */ cache_line_size = cpu_dcache_line_size(); switch (current_cpu_type()) { + case CPU_R5500: case CPU_TX49XX: - /* TX49 supports only Pref_Load */ + /* These processors only support the Pref_Load. */ pref_bias_copy_load = 256; break; diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 42942038d0fd..f335cf6cdd78 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -318,6 +318,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_BCM4710: case CPU_LOONGSON2: case CPU_CAVIUM_OCTEON: + case CPU_R5500: if (m4kc_tlbp_war()) uasm_i_nop(p); tlbw(p); -- cgit v1.2.3 From dc58f81346787c82ac47aef1be911ed9edf16024 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 4 Mar 2009 23:45:44 +0900 Subject: MIPS: TXx9: update defconfigs Enable following features: * MTD (PHYSMAP) * LED (LEDS_GPIO) * RBTX4939 * 7SEGLED * IDE (IDE_TX4938, IDE_TX4939) * SMC91X * RTC_DRV_TX4939 Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/configs/jmr3927_defconfig | 265 ++++++++++++++++++++--------- arch/mips/configs/rbtx49xx_defconfig | 319 ++++++++++++++++++++++++++++------- 2 files changed, 447 insertions(+), 137 deletions(-) diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 9d5bd2a0af3d..5380f1f582d9 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc9 -# Fri Jul 11 23:01:36 2008 +# Linux kernel version: 2.6.29-rc7 +# Wed Mar 4 23:07:16 2009 # CONFIG_MIPS=y @@ -18,8 +18,10 @@ CONFIG_MIPS=y # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set +# CONFIG_MACH_EMMA is not set # CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set @@ -39,7 +41,11 @@ CONFIG_MIPS=y # CONFIG_SNI_RM is not set CONFIG_MACH_TX39XX=y # CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_MACH_TXX9=y CONFIG_TOSHIBA_JMR3927=y CONFIG_SOC_TX3927=y # CONFIG_TOSHIBA_FPCIB0 is not set @@ -54,12 +60,14 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_CEVT_TXX9=y CONFIG_GPIO_TXX9=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y # CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y @@ -87,6 +95,7 @@ CONFIG_CPU_TX39XX=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -94,6 +103,7 @@ CONFIG_CPU_TX39XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set CONFIG_SYS_HAS_CPU_TX39XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y @@ -117,14 +127,12 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -# CONFIG_TICK_ONESHOT is not set +CONFIG_UNEVICTABLE_LRU=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -159,6 +167,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set @@ -171,7 +188,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -188,26 +204,23 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -221,7 +234,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -231,12 +244,15 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set CONFIG_MMU=y # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y @@ -245,15 +261,12 @@ CONFIG_TRAD_SIGNALS=y # CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -293,6 +306,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -302,14 +316,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # @@ -323,7 +332,89 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set @@ -336,6 +427,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -361,7 +453,6 @@ CONFIG_HAVE_IDE=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -383,6 +474,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -392,6 +486,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set @@ -399,6 +494,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -406,7 +504,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_TC35815=y -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -415,9 +512,11 @@ CONFIG_TC35815=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -428,6 +527,10 @@ CONFIG_TC35815=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -440,27 +543,7 @@ CONFIG_TC35815=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -517,16 +600,22 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y # -# GPIO Support +# Memory mapped GPIO expanders: # # # I2C GPIO expanders: # +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + # # SPI GPIO expanders: # @@ -542,6 +631,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set CONFIG_TXX9_WDT=y # @@ -549,18 +639,21 @@ CONFIG_TXX9_WDT=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -591,16 +684,26 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y @@ -626,27 +729,34 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set CONFIG_RTC_DRV_DS1742=y # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -676,28 +786,17 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_HFSPLUS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y @@ -726,7 +825,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" # @@ -734,15 +842,18 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index 83d5c58662c8..1efe977497dd 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc9 -# Fri Jul 11 23:03:21 2008 +# Linux kernel version: 2.6.29-rc7 +# Wed Mar 4 23:08:06 2009 # CONFIG_MIPS=y @@ -18,8 +18,10 @@ CONFIG_MIPS=y # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set +# CONFIG_MACH_EMMA is not set # CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set @@ -39,20 +41,28 @@ CONFIG_MIPS=y # CONFIG_SNI_RM is not set # CONFIG_MACH_TX39XX is not set CONFIG_MACH_TX49XX=y +# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_MACH_TXX9=y CONFIG_TOSHIBA_RBTX4927=y CONFIG_TOSHIBA_RBTX4938=y +CONFIG_TOSHIBA_RBTX4939=y CONFIG_SOC_TX4927=y CONFIG_SOC_TX4938=y +CONFIG_SOC_TX4939=y +CONFIG_TXX9_7SEGLED=y # CONFIG_TOSHIBA_FPCIB0 is not set CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y # # Multiplex Pin Select # -CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y +# CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 is not set # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set +CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP=y CONFIG_PCI_TX4927=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -64,14 +74,18 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y CONFIG_CEVT_R4K=y CONFIG_CEVT_TXX9=y +CONFIG_CSRC_R4K_LIB=y CONFIG_CSRC_R4K=y CONFIG_GPIO_TXX9=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y # CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y @@ -100,6 +114,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 CONFIG_CPU_TX49XX=y # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -107,6 +122,7 @@ CONFIG_CPU_TX49XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set CONFIG_SYS_HAS_CPU_TX49XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y @@ -134,13 +150,12 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -176,6 +191,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -190,7 +214,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -207,30 +230,26 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set -# CONFIG_MODULE_UNLOAD is not set +CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -244,7 +263,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +# CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_FREEZER is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -254,12 +274,15 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set CONFIG_MMU=y # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y @@ -268,15 +291,12 @@ CONFIG_TRAD_SIGNALS=y # CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -318,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -327,14 +348,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # @@ -348,7 +364,90 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set @@ -365,9 +464,60 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +CONFIG_BLK_DEV_IDE_TX4938=y +CONFIG_BLK_DEV_IDE_TX4939=y +CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support @@ -390,7 +540,6 @@ CONFIG_HAVE_IDE=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -412,15 +561,19 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +CONFIG_SMC91X=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set @@ -429,6 +582,9 @@ CONFIG_NE2000=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -436,7 +592,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_TC35815=y -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -445,9 +600,11 @@ CONFIG_TC35815=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -458,6 +615,10 @@ CONFIG_TC35815=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -502,6 +663,7 @@ CONFIG_SERIAL_TXX9_CONSOLE=y CONFIG_SERIAL_TXX9_STDSERIAL=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -517,26 +679,34 @@ CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set CONFIG_SPI_TXX9=y # # SPI Protocol Masters # -CONFIG_EEPROM_AT25=y # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y # -# GPIO Support +# Memory mapped GPIO expanders: # # # I2C GPIO expanders: # +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + # # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set @@ -550,6 +720,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set CONFIG_TXX9_WDT=m # @@ -557,18 +728,21 @@ CONFIG_TXX9_WDT=m # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -599,15 +773,27 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y @@ -628,35 +814,47 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set CONFIG_RTC_DRV_RS5C348=y +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set CONFIG_RTC_DRV_DS1742=y # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +CONFIG_RTC_DRV_TX4939=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -687,30 +885,19 @@ CONFIG_GENERIC_ACL=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_HFSPLUS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -740,7 +927,16 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" # @@ -748,15 +944,18 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -- cgit v1.2.3 From 0a7c808fccc86418acf0e0b4b119094fb56af952 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 11 Mar 2009 21:08:50 +0100 Subject: MIPS: IP27: Enable RAID5 module Signed-off-by: Ralf Baechle --- arch/mips/configs/ip27_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index f2baea3039bb..0208723adf28 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -512,7 +512,7 @@ CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m +CONFIG_MD_RAID456=y CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m -- cgit v1.2.3 From 363911d027d1de1c6df79eb3f487f5476b9619f4 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Thu, 12 Mar 2009 03:23:48 +0000 Subject: Squashfs: Valid filesystems are flagged as bad by the corrupted fs patch The corrupted filesystem patch added a check against zlib trying to output too much data in the presence of data corruption. This check triggered if zlib_inflate asked to be called again (Z_OK) with avail_out == 0 and no more output buffers available. This check proves to be rather dumb, as it incorrectly catches the case where zlib has generated all the output, but there are still input bytes to be processed. This patch does a number of things. It removes the original check and replaces it with code to not move to the next output buffer if there are no more output buffers available, relying on zlib to error if it wants an extra output buffer in the case of data corruption. It also replaces the Z_NO_FLUSH flag with the more correct Z_SYNC_FLUSH flag, and makes the error messages more understandable to non-technical users. Signed-off-by: Phillip Lougher Reported-by: Stefan Lippers-Hollmann --- fs/squashfs/block.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-) diff --git a/fs/squashfs/block.c b/fs/squashfs/block.c index 321728f48f2d..2a7960310349 100644 --- a/fs/squashfs/block.c +++ b/fs/squashfs/block.c @@ -184,15 +184,7 @@ int squashfs_read_data(struct super_block *sb, void **buffer, u64 index, offset = 0; } - if (msblk->stream.avail_out == 0) { - if (page == pages) { - ERROR("zlib_inflate tried to " - "decompress too much data, " - "expected %d bytes. Zlib " - "data probably corrupt\n", - srclength); - goto release_mutex; - } + if (msblk->stream.avail_out == 0 && page < pages) { msblk->stream.next_out = buffer[page++]; msblk->stream.avail_out = PAGE_CACHE_SIZE; } @@ -209,25 +201,20 @@ int squashfs_read_data(struct super_block *sb, void **buffer, u64 index, zlib_init = 1; } - zlib_err = zlib_inflate(&msblk->stream, Z_NO_FLUSH); + zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH); if (msblk->stream.avail_in == 0 && k < b) put_bh(bh[k++]); } while (zlib_err == Z_OK); if (zlib_err != Z_STREAM_END) { - ERROR("zlib_inflate returned unexpected result" - " 0x%x, srclength %d, avail_in %d," - " avail_out %d\n", zlib_err, srclength, - msblk->stream.avail_in, - msblk->stream.avail_out); + ERROR("zlib_inflate error, data probably corrupt\n"); goto release_mutex; } zlib_err = zlib_inflateEnd(&msblk->stream); if (zlib_err != Z_OK) { - ERROR("zlib_inflateEnd returned unexpected result 0x%x," - " srclength %d\n", zlib_err, srclength); + ERROR("zlib_inflate error, data probably corrupt\n"); goto release_mutex; } length = msblk->stream.total_out; -- cgit v1.2.3 From 76e6eee03353f01bfca707d4dbb1f10a4ee27dc0 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 12 Mar 2009 14:35:43 -0600 Subject: cpumask: tsk_cpumask for accessing the struct task_struct's cpus_allowed. This allows us to change the representation (to a dangling bitmap or cpumask_var_t) without breaking all the callers: they can use tsk_cpumask() now and won't see a difference as the changes roll into linux-next. Signed-off-by: Rusty Russell --- include/linux/sched.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/sched.h b/include/linux/sched.h index 8c216e057c94..011db2f4c94c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1419,6 +1419,9 @@ struct task_struct { #endif }; +/* Future-safe accessor for struct task_struct's cpus_allowed. */ +#define tsk_cpumask(tsk) (&(tsk)->cpus_allowed) + /* * Priority of a process goes from 0..MAX_PRIO-1, valid RT * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH -- cgit v1.2.3 From 45e575ab9bfada5a5ef1b6174f8e749b1ecf0864 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 12 Mar 2009 14:35:44 -0600 Subject: cpumask: mm_cpumask for accessing the struct mm_struct's cpu_vm_mask. This allows us to change the representation (to a dangling bitmap or cpumask_var_t) without breaking all the callers: they can use mm_cpumask() now and won't see a difference as the changes roll into linux-next. Signed-off-by: Rusty Russell --- include/linux/mm_types.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 92915e81443f..d84feb7bdbf0 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -276,4 +276,7 @@ struct mm_struct { #endif }; +/* Future-safe accessor for struct mm_struct's cpu_vm_mask. */ +#define mm_cpumask(mm) (&(mm)->cpu_vm_mask) + #endif /* _LINUX_MM_TYPES_H */ -- cgit v1.2.3 From 3bb9db79235e19dbb18ba6f4a428a97c69115319 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 12 Mar 2009 13:36:38 +0100 Subject: hwmon: (abituguru3) Fix I/O error handling Fix a logic bug reported by Roel Kluin, by rewriting the error handling code in a clearer way. Signed-off-by: Jean Delvare Cc: Roel Kluin Acked-by: Alistair John Strachan Acked-by: Hans de Goede --- drivers/hwmon/abituguru3.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index e52b38806d03..ad2b3431b725 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -760,8 +760,11 @@ static int abituguru3_read_increment_offset(struct abituguru3_data *data, for (i = 0; i < offset_count; i++) if ((x = abituguru3_read(data, bank, offset + i, count, - buf + i * count)) != count) - return i * count + (i && (x < 0)) ? 0 : x; + buf + i * count)) != count) { + if (x < 0) + return x; + return i * count + x; + } return i * count; } -- cgit v1.2.3 From 1a51e068c900eb6ea23ce597361ebf3b19a57b23 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 12 Mar 2009 13:36:38 +0100 Subject: hwmon: (lm90) Document support for the MAX6648/6692 chips Update documentation to prevent further confusion/duplication. Signed-off-by: Darrick J. Wong Signed-off-by: Jean Delvare --- Documentation/hwmon/lm90 | 10 ++++++++++ drivers/hwmon/Kconfig | 4 ++-- drivers/hwmon/lm90.c | 8 ++++---- 3 files changed, 16 insertions(+), 6 deletions(-) diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 0e8411710238..93d8e3d55150 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -42,6 +42,11 @@ Supported chips: Addresses scanned: I2C 0x4e Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + * Maxim MAX6648 + Prefix: 'max6646' + Addresses scanned: I2C 0x4c + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 * Maxim MAX6649 Prefix: 'max6646' Addresses scanned: I2C 0x4c @@ -74,6 +79,11 @@ Supported chips: 0x4c, 0x4d and 0x4e Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370 + * Maxim MAX6692 + Prefix: 'max6646' + Addresses scanned: I2C 0x4c + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 Author: Jean Delvare diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index b84bf066879b..b4eea0292c1a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -543,8 +543,8 @@ config SENSORS_LM90 help If you say yes here you get support for National Semiconductor LM90, LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim - MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and - MAX6681 sensor chips. + MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, + MAX6680, MAX6681 and MAX6692 sensor chips. This driver can also be built as a module. If so, the module will be called lm90. diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 96a701866726..1aff7575799d 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -32,10 +32,10 @@ * supported by this driver. These chips lack the remote temperature * offset feature. * - * This driver also supports the MAX6646, MAX6647 and MAX6649 chips - * made by Maxim. These are again similar to the LM86, but they use - * unsigned temperature values and can report temperatures from 0 to - * 145 degrees. + * This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and + * MAX6692 chips made by Maxim. These are again similar to the LM86, + * but they use unsigned temperature values and can report temperatures + * from 0 to 145 degrees. * * This driver also supports the MAX6680 and MAX6681, two other sensor * chips made by Maxim. These are quite similar to the other Maxim -- cgit v1.2.3 From e267d25005c861fe6afda343f044536342c9f8b4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 12 Mar 2009 13:36:39 +0100 Subject: hwmon: (it87) Properly decode -128 degrees C temperature The it87 driver is reporting -128 degrees C as +128 degrees C. That's not a terribly likely temperature value but let's still get it right, especially when it simplifies the code. Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 95a99c590da2..9157247fed8e 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -213,7 +213,7 @@ static inline u16 FAN16_TO_REG(long rpm) #define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\ ((val)+500)/1000),-128,127)) -#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000) +#define TEMP_FROM_REG(val) ((val) * 1000) #define PWM_TO_REG(val) ((val) >> 1) #define PWM_FROM_REG(val) (((val)&0x7f) << 1) @@ -267,9 +267,9 @@ struct it87_data { u8 has_fan; /* Bitfield, fans enabled */ u16 fan[5]; /* Register values, possibly combined */ u16 fan_min[5]; /* Register values, possibly combined */ - u8 temp[3]; /* Register value */ - u8 temp_high[3]; /* Register value */ - u8 temp_low[3]; /* Register value */ + s8 temp[3]; /* Register value */ + s8 temp_high[3]; /* Register value */ + s8 temp_low[3]; /* Register value */ u8 sensor; /* Register value */ u8 fan_div[3]; /* Register encoding, shifted right */ u8 vid; /* Register encoding, combined */ -- cgit v1.2.3 From 51b3e2700177b89fdb0d985926ce777a7ad52b15 Mon Sep 17 00:00:00 2001 From: Andrew Klossner Date: Thu, 12 Mar 2009 13:36:39 +0100 Subject: hwmon: (f75375s) Remove unnecessary and confusing initialization f75375_probe calls i2c_get_clientdata to initialize the data pointer, but there isn't yet any client data to get, and the value is never used before the variable is assigned a new value seven lines later. The call doesn't hurt anything and wastes only a couple of cycles. The reason to fix it is because this module serves as an example to hackers writing new hwmon drivers, and this part of the example is confusing. Signed-off-by: Andrew Klossner Signed-off-by: Jean Delvare --- drivers/hwmon/f75375s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index 1692de369969..18a1ba888165 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -617,7 +617,7 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data, static int f75375_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct f75375_data *data = i2c_get_clientdata(client); + struct f75375_data *data; struct f75375s_platform_data *f75375s_pdata = client->dev.platform_data; int err; -- cgit v1.2.3 From 9f4c899c0d90e1b51b6864834f3877b47c161a0e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 12 Mar 2009 14:51:32 -0400 Subject: NFS: Fix the fix to Bugzilla #11061, when IPv6 isn't defined... Stephen Rothwell reports: Today's linux-next build (powerpc ppc64_defconfig) failed like this: fs/built-in.o: In function `.nfs_get_client': client.c:(.text+0x115010): undefined reference to `.__ipv6_addr_type' Fix by moving the IPV6 specific parts of commit d7371c41b0cda782256b1df759df4e8d4724584c ("Bug 11061, NFS mounts dropped") into the '#ifdef IPV6..." section. Also fix up a couple of formatting issues. Signed-off-by: Trond Myklebust --- fs/nfs/client.c | 68 +++++++++++++++++++++++++++++++++------------------------ 1 file changed, 39 insertions(+), 29 deletions(-) diff --git a/fs/nfs/client.c b/fs/nfs/client.c index 06654b831d19..574158ae2398 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -255,6 +255,32 @@ static int nfs_sockaddr_match_ipaddr(const struct sockaddr *sa1, } return 0; } + +/* + * Test if two ip6 socket addresses refer to the same socket by + * comparing relevant fields. The padding bytes specifically, are not + * compared. sin6_flowinfo is not compared because it only affects QoS + * and sin6_scope_id is only compared if the address is "link local" + * because "link local" addresses need only be unique to a specific + * link. Conversely, ordinary unicast addresses might have different + * sin6_scope_id. + * + * The caller should ensure both socket addresses are AF_INET6. + */ +static int nfs_sockaddr_cmp_ip6(const struct sockaddr *sa1, + const struct sockaddr *sa2) +{ + const struct sockaddr_in6 *saddr1 = (const struct sockaddr_in6 *)sa1; + const struct sockaddr_in6 *saddr2 = (const struct sockaddr_in6 *)sa2; + + if (!ipv6_addr_equal(&saddr1->sin6_addr, + &saddr1->sin6_addr)) + return 0; + if (ipv6_addr_scope(&saddr1->sin6_addr) == IPV6_ADDR_SCOPE_LINKLOCAL && + saddr1->sin6_scope_id != saddr2->sin6_scope_id) + return 0; + return saddr1->sin6_port == saddr2->sin6_port; +} #else static int nfs_sockaddr_match_ipaddr4(const struct sockaddr_in *sa1, const struct sockaddr_in *sa2) @@ -270,6 +296,12 @@ static int nfs_sockaddr_match_ipaddr(const struct sockaddr *sa1, return nfs_sockaddr_match_ipaddr4((const struct sockaddr_in *)sa1, (const struct sockaddr_in *)sa2); } + +static int nfs_sockaddr_cmp_ip6(const struct sockaddr * sa1, + const struct sockaddr * sa2) +{ + return 0; +} #endif /* @@ -279,37 +311,17 @@ static int nfs_sockaddr_match_ipaddr(const struct sockaddr *sa1, * * The caller should ensure both socket addresses are AF_INET. */ -static int nfs_sockaddr_cmp_ip4(const struct sockaddr_in * saddr1, - const struct sockaddr_in * saddr2) +static int nfs_sockaddr_cmp_ip4(const struct sockaddr *sa1, + const struct sockaddr *sa2) { + const struct sockaddr_in *saddr1 = (const struct sockaddr_in *)sa1; + const struct sockaddr_in *saddr2 = (const struct sockaddr_in *)sa2; + if (saddr1->sin_addr.s_addr != saddr2->sin_addr.s_addr) return 0; return saddr1->sin_port == saddr2->sin_port; } -/* - * Test if two ip6 socket addresses refer to the same socket by - * comparing relevant fields. The padding bytes specifically, are not - * compared. sin6_flowinfo is not compared because it only affects QoS - * and sin6_scope_id is only compared if the address is "link local" - * because "link local" addresses need only be unique to a specific - * link. Conversely, ordinary unicast addresses might have different - * sin6_scope_id. - * - * The caller should ensure both socket addresses are AF_INET6. - */ -static int nfs_sockaddr_cmp_ip6 (const struct sockaddr_in6 * saddr1, - const struct sockaddr_in6 * saddr2) -{ - if (!ipv6_addr_equal(&saddr1->sin6_addr, - &saddr1->sin6_addr)) - return 0; - if (ipv6_addr_scope(&saddr1->sin6_addr) == IPV6_ADDR_SCOPE_LINKLOCAL && - saddr1->sin6_scope_id != saddr2->sin6_scope_id) - return 0; - return saddr1->sin6_port == saddr2->sin6_port; -} - /* * Test if two socket addresses represent the same actual socket, * by comparing (only) relevant fields. @@ -322,11 +334,9 @@ static int nfs_sockaddr_cmp(const struct sockaddr *sa1, switch (sa1->sa_family) { case AF_INET: - return nfs_sockaddr_cmp_ip4((const struct sockaddr_in *) sa1, - (const struct sockaddr_in *) sa2); + return nfs_sockaddr_cmp_ip4(sa1, sa2); case AF_INET6: - return nfs_sockaddr_cmp_ip6((const struct sockaddr_in6 *) sa1, - (const struct sockaddr_in6 *) sa2); + return nfs_sockaddr_cmp_ip6(sa1, sa2); } return 0; } -- cgit v1.2.3 From 649426efcfbc67a8b033497151816cbac9fd0cfa Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 5 Mar 2009 13:57:28 -0500 Subject: PCI: Add PCI quirk to disable L0s ASPM state for 82575 and 82598 This patch is intended to disable L0s ASPM link state for 82598 (ixgbe) parts due to the fact that it is possible to corrupt TX data when coming back out of L0s on some systems. The workaround had been added for 82575 (igb) previously, but did not use the ASPM api. This quirk uses the ASPM api to prevent the ASPM subsystem from re-enabling the L0s state. Instead of adding the fix in igb to the ixgbe driver as well it was decided to move it into a pci quirk. It is necessary to move the fix out of the driver and into a pci quirk in order to prevent the issue from occuring prior to driver load to handle the possibility of the device being passed to a VM via direct assignment. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher CC: Jesse Barnes Signed-off-by: Matthew Wilcox --- drivers/pci/quirks.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f20d55368edb..1a7c48d71dc7 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "pci.h" int isa_dma_bridge_buggy; @@ -1749,6 +1750,30 @@ static void __devinit quirk_e100_interrupt(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt); +/* + * The 82575 and 82598 may experience data corruption issues when transitioning + * out of L0S. To prevent this we need to disable L0S on the pci-e link + */ +static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev) +{ + dev_info(&dev->dev, "Disabling L0s\n"); + pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); + static void __devinit fixup_rev1_53c810(struct pci_dev* dev) { /* rev 1 ncr53c810 chips don't set the class at all which means -- cgit v1.2.3 From cb4cb4ac7338c28b047760be187355ed9c783e72 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Thu, 5 Mar 2009 19:28:40 -0700 Subject: PCIe: AER: during disable, check subordinate before walking Commit 47a8b0cc (Enable PCIe AER only after checking firmware support) wants to walk the PCI bus in the remove path to disable AER, and calls pci_walk_bus for downstream bridges. Unfortunately, in the remove path, we remove devices and bridges in a depth-first manner, starting with the furthest downstream bridge and working our way backwards. The furthest downstream bridges will not have a dev->subordinate, and we hit a NULL deref in pci_walk_bus. Check for dev->subordinate first before attempting to walk the PCI hierarchy below us. Acked-by: Andrew Patterson Signed-off-by: Alex Chiang Signed-off-by: Matthew Wilcox --- drivers/pci/pcie/aer/aerdrv_core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index d0c973685868..382575007382 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -133,6 +133,9 @@ static void set_downstream_devices_error_reporting(struct pci_dev *dev, bool enable) { set_device_error_reporting(dev, &enable); + + if (!dev->subordinate) + return; pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable); } -- cgit v1.2.3 From 3f3b902ed8147c42a4a9764014c758e6b3f42f51 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 6 Mar 2009 14:39:14 +1100 Subject: powerpc/pseries: The RPA PCI hotplug driver depends on EEH The RPA PCI hotplug driver calls EEH routines, so should depend on EEH. Also PPC_PSERIES implies PPC64, so remove that. Signed-off-by: Michael Ellerman Signed-off-by: Matthew Wilcox --- drivers/pci/hotplug/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index eacfb13998bb..9aa4fe100a0d 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -143,7 +143,7 @@ config HOTPLUG_PCI_SHPC config HOTPLUG_PCI_RPA tristate "RPA PCI Hotplug driver" - depends on PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE + depends on PPC_PSERIES && EEH && !HOTPLUG_PCI_FAKE help Say Y here if you have a RPA system that supports PCI Hotplug. -- cgit v1.2.3 From 7726c3308a92b4a4c3bd059059498fca0e6f8e48 Mon Sep 17 00:00:00 2001 From: Prakash Punnoor Date: Fri, 6 Mar 2009 00:45:12 +0100 Subject: pci: don't disable too many HT MSI mapping Prakash's system needs MSI disabled on some bridges, but not all. This seems to be the minimal fix for 2.6.29, but should be replaced during 2.6.30. Signed-off-by: Prakash Punnoor Signed-off-by: Matthew Wilcox --- drivers/pci/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 1a7c48d71dc7..9104671e4b72 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2166,6 +2166,10 @@ static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) int pos; int found; + /* Enabling HT MSI mapping on this device breaks MCP51 */ + if (dev->device == 0x270) + return; + /* check if there is HT MSI cap or enabled on this device */ found = ht_check_msi_mapping(dev); -- cgit v1.2.3 From 6a958d5b28e4a180458e0d319d2e4bb5c4b7da3e Mon Sep 17 00:00:00 2001 From: Prakash Punnoor Date: Fri, 6 Mar 2009 10:10:35 +0100 Subject: pci: Fix typo in message while disabling HT MSI mapping "Enabling" should read "Disabling" Signed-off-by: Prakash Punnoor Signed-off-by: Matthew Wilcox --- drivers/pci/quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 9104671e4b72..92b9efe9bcaf 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2122,7 +2122,7 @@ static void __devinit ht_disable_msi_mapping(struct pci_dev *dev) if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, &flags) == 0) { - dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); + dev_info(&dev->dev, "Disabling HT MSI Mapping\n"); pci_write_config_byte(dev, pos + HT_MSI_FLAGS, flags & ~HT_MSI_FLAGS_ENABLE); -- cgit v1.2.3 From d89987193631bf23d1735c55d13a06d4b8d0e9bd Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Sat, 7 Mar 2009 19:35:47 -0700 Subject: PCIe: portdrv: call pci_disable_device during remove The PCIe port driver calls pci_enable_device() during probe but never calls pci_disable_device() during remove. Cc: stable@kernel.org Signed-off-by: Alex Chiang Signed-off-by: Matthew Wilcox --- drivers/pci/pcie/portdrv_pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 248b4db91552..5ea566e20b37 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -103,6 +103,7 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev, static void pcie_portdrv_remove (struct pci_dev *dev) { pcie_port_device_remove(dev); + pci_disable_device(dev); kfree(pci_get_drvdata(dev)); } -- cgit v1.2.3 From 446c92b2901bedb3725d29b4e73def8aba623ffc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 12 Mar 2009 18:03:16 +0100 Subject: [ARM] 5421/1: ftrace: fix crash due to tracing of __naked functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is a fix for the following crash observed in 2.6.29-rc3: http://lkml.org/lkml/2009/1/29/150 On ARM it doesn't make sense to trace a naked function because then mcount is called without stack and frame pointer being set up and there is no chance to restore the lr register to the value before mcount was called. Reported-by: Matthias Kaehlcke Tested-by: Matthias Kaehlcke Cc: Abhishek Sagar Cc: Steven Rostedt Cc: Ingo Molnar Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/kernel/fiq.c | 4 ++-- arch/arm/mm/copypage-feroceon.c | 2 +- arch/arm/mm/copypage-v3.c | 2 +- arch/arm/mm/copypage-v4mc.c | 2 +- arch/arm/mm/copypage-v4wb.c | 2 +- arch/arm/mm/copypage-v4wt.c | 2 +- arch/arm/mm/copypage-xsc3.c | 2 +- arch/arm/mm/copypage-xscale.c | 2 +- include/linux/compiler-gcc.h | 10 +++++++++- 9 files changed, 18 insertions(+), 10 deletions(-) diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 36f81d967979..6ff7919613d7 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -88,7 +88,7 @@ void set_fiq_handler(void *start, unsigned int length) * disable irqs for the duration. Note - these functions are almost * entirely coded in assembly. */ -void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs) +void __naked set_fiq_regs(struct pt_regs *regs) { register unsigned long tmp; asm volatile ( @@ -106,7 +106,7 @@ void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs) : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); } -void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs) +void __naked get_fiq_regs(struct pt_regs *regs) { register unsigned long tmp; asm volatile ( diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c index c3ba6a94da0c..70997d5bee2d 100644 --- a/arch/arm/mm/copypage-feroceon.c +++ b/arch/arm/mm/copypage-feroceon.c @@ -13,7 +13,7 @@ #include #include -static void __attribute__((naked)) +static void __naked feroceon_copy_user_page(void *kto, const void *kfrom) { asm("\ diff --git a/arch/arm/mm/copypage-v3.c b/arch/arm/mm/copypage-v3.c index 70ed96c8af8e..de9c06854ad7 100644 --- a/arch/arm/mm/copypage-v3.c +++ b/arch/arm/mm/copypage-v3.c @@ -15,7 +15,7 @@ * * FIXME: do we need to handle cache stuff... */ -static void __attribute__((naked)) +static void __naked v3_copy_user_page(void *kto, const void *kfrom) { asm("\n\ diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index 1601698b9800..7370a7142b04 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -44,7 +44,7 @@ static DEFINE_SPINLOCK(minicache_lock); * instruction. If your processor does not supply this, you have to write your * own copy_user_highpage that does the right thing. */ -static void __attribute__((naked)) +static void __naked mc_copy_user_page(void *from, void *to) { asm volatile( diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c index 3ec93dab7656..9ab098414227 100644 --- a/arch/arm/mm/copypage-v4wb.c +++ b/arch/arm/mm/copypage-v4wb.c @@ -22,7 +22,7 @@ * instruction. If your processor does not supply this, you have to write your * own copy_user_highpage that does the right thing. */ -static void __attribute__((naked)) +static void __naked v4wb_copy_user_page(void *kto, const void *kfrom) { asm("\ diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c index 0f1188efae45..300efafd6643 100644 --- a/arch/arm/mm/copypage-v4wt.c +++ b/arch/arm/mm/copypage-v4wt.c @@ -20,7 +20,7 @@ * dirty data in the cache. However, we do have to ensure that * subsequent reads are up to date. */ -static void __attribute__((naked)) +static void __naked v4wt_copy_user_page(void *kto, const void *kfrom) { asm("\ diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c index 39a994542cad..bc4525f5ab23 100644 --- a/arch/arm/mm/copypage-xsc3.c +++ b/arch/arm/mm/copypage-xsc3.c @@ -29,7 +29,7 @@ * if we eventually end up using our copied page. * */ -static void __attribute__((naked)) +static void __naked xsc3_mc_copy_user_page(void *kto, const void *kfrom) { asm("\ diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index d18f2397ee2d..76824d3e966a 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -42,7 +42,7 @@ static DEFINE_SPINLOCK(minicache_lock); * Dcache aliasing issue. The writes will be forwarded to the write buffer, * and merged as appropriate. */ -static void __attribute__((naked)) +static void __naked mc_copy_user_page(void *from, void *to) { /* diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 1514d534deeb..a3ed7cb8ca34 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -52,7 +52,15 @@ #define __deprecated __attribute__((deprecated)) #define __packed __attribute__((packed)) #define __weak __attribute__((weak)) -#define __naked __attribute__((naked)) + +/* + * it doesn't make sense on ARM (currently the only user of __naked) to trace + * naked functions because then mcount is called without stack and frame pointer + * being set up and there is no chance to restore the lr register to the value + * before mcount was called. + */ +#define __naked __attribute__((naked)) notrace + #define __noreturn __attribute__((noreturn)) /* -- cgit v1.2.3 From 305b07680f6c6a7e59f996c5bd85f009caff5bb1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 12 Mar 2009 18:03:01 +0000 Subject: [ARM] update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 136 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 133 insertions(+), 3 deletions(-) diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index fd23c0e9e698..b4211d8b2ac7 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sun Nov 30 16:39:36 2008 +# Last update: Thu Mar 12 18:01:45 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -1811,7 +1811,7 @@ pilz_pmi5 MACH_PILZ_PMI5 PILZ_PMI5 1820 jade MACH_JADE JADE 1821 ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822 gprisc3 MACH_GPRISC3 GPRISC3 1823 -stamp9260 MACH_STAMP9260 STAMP9260 1824 +stamp9g20 MACH_STAMP9G20 STAMP9G20 1824 smdk6430 MACH_SMDK6430 SMDK6430 1825 smdkc100 MACH_SMDKC100 SMDKC100 1826 tavorevb MACH_TAVOREVB TAVOREVB 1827 @@ -1993,4 +1993,134 @@ spark MACH_SPARK SPARK 2002 benzina MACH_BENZINA BENZINA 2003 blaze MACH_BLAZE BLAZE 2004 linkstation_ls_hgl MACH_LINKSTATION_LS_HGL LINKSTATION_LS_HGL 2005 -htcvenus MACH_HTCVENUS HTCVENUS 2006 +htckovsky MACH_HTCVENUS HTCVENUS 2006 +sony_prs505 MACH_SONY_PRS505 SONY_PRS505 2007 +hanlin_v3 MACH_HANLIN_V3 HANLIN_V3 2008 +sapphira MACH_SAPPHIRA SAPPHIRA 2009 +dack_sda_01 MACH_DACK_SDA_01 DACK_SDA_01 2010 +armbox MACH_ARMBOX ARMBOX 2011 +harris_rvp MACH_HARRIS_RVP HARRIS_RVP 2012 +ribaldo MACH_RIBALDO RIBALDO 2013 +agora MACH_AGORA AGORA 2014 +omap3_mini MACH_OMAP3_MINI OMAP3_MINI 2015 +a9sam6432_b MACH_A9SAM6432_B A9SAM6432_B 2016 +usg2410 MACH_USG2410 USG2410 2017 +pc72052_i10_revb MACH_PC72052_I10_REVB PC72052_I10_REVB 2018 +mx35_exm32 MACH_MX35_EXM32 MX35_EXM32 2019 +topas910 MACH_TOPAS910 TOPAS910 2020 +hyena MACH_HYENA HYENA 2021 +pospax MACH_POSPAX POSPAX 2022 +hdl_gx MACH_HDL_GX HDL_GX 2023 +ctera_4bay MACH_CTERA_4BAY CTERA_4BAY 2024 +ctera_plug_c MACH_CTERA_PLUG_C CTERA_PLUG_C 2025 +crwea_plug_i MACH_CRWEA_PLUG_I CRWEA_PLUG_I 2026 +egauge2 MACH_EGAUGE2 EGAUGE2 2027 +didj MACH_DIDJ DIDJ 2028 +m_s3c2443 MACH_MEISTER MEISTER 2029 +htcblackstone MACH_HTCBLACKSTONE HTCBLACKSTONE 2030 +cpuat9g20 MACH_CPUAT9G20 CPUAT9G20 2031 +smdk6440 MACH_SMDK6440 SMDK6440 2032 +omap_35xx_mvp MACH_OMAP_35XX_MVP OMAP_35XX_MVP 2033 +ctera_plug_i MACH_CTERA_PLUG_I CTERA_PLUG_I 2034 +pvg610_100 MACH_PVG610 PVG610 2035 +hprw6815 MACH_HPRW6815 HPRW6815 2036 +omap3_oswald MACH_OMAP3_OSWALD OMAP3_OSWALD 2037 +nas4220b MACH_NAS4220B NAS4220B 2038 +htcraphael_cdma MACH_HTCRAPHAEL_CDMA HTCRAPHAEL_CDMA 2039 +htcdiamond_cdma MACH_HTCDIAMOND_CDMA HTCDIAMOND_CDMA 2040 +scaler MACH_SCALER SCALER 2041 +zylonite2 MACH_ZYLONITE2 ZYLONITE2 2042 +aspenite MACH_ASPENITE ASPENITE 2043 +teton MACH_TETON TETON 2044 +ttc_dkb MACH_TTC_DKB TTC_DKB 2045 +bishop2 MACH_BISHOP2 BISHOP2 2046 +ippv5 MACH_IPPV5 IPPV5 2047 +farm926 MACH_FARM926 FARM926 2048 +mmccpu MACH_MMCCPU MMCCPU 2049 +sgmsfl MACH_SGMSFL SGMSFL 2050 +tt8000 MACH_TT8000 TT8000 2051 +zrn4300lp MACH_ZRN4300LP ZRN4300LP 2052 +mptc MACH_MPTC MPTC 2053 +h6051 MACH_H6051 H6051 2054 +pvg610_101 MACH_PVG610_101 PVG610_101 2055 +stamp9261_pc_evb MACH_STAMP9261_PC_EVB STAMP9261_PC_EVB 2056 +pelco_odysseus MACH_PELCO_ODYSSEUS PELCO_ODYSSEUS 2057 +tny_a9260 MACH_TNY_A9260 TNY_A9260 2058 +tny_a9g20 MACH_TNY_A9G20 TNY_A9G20 2059 +aesop_mp2530f MACH_AESOP_MP2530F AESOP_MP2530F 2060 +dx900 MACH_DX900 DX900 2061 +cpodc2 MACH_CPODC2 CPODC2 2062 +tilt_8925 MACH_TILT_8925 TILT_8925 2063 +davinci_dm357_evm MACH_DAVINCI_DM357_EVM DAVINCI_DM357_EVM 2064 +swordfish MACH_SWORDFISH SWORDFISH 2065 +corvus MACH_CORVUS CORVUS 2066 +taurus MACH_TAURUS TAURUS 2067 +axm MACH_AXM AXM 2068 +axc MACH_AXC AXC 2069 +baby MACH_BABY BABY 2070 +mp200 MACH_MP200 MP200 2071 +pcm043 MACH_PCM043 PCM043 2072 +hanlin_v3c MACH_HANLIN_V3C HANLIN_V3C 2073 +kbk9g20 MACH_KBK9G20 KBK9G20 2074 +adsturbog5 MACH_ADSTURBOG5 ADSTURBOG5 2075 +avenger_lite1 MACH_AVENGER_LITE1 AVENGER_LITE1 2076 +suc82x MACH_SUC SUC 2077 +at91sam7s256 MACH_AT91SAM7S256 AT91SAM7S256 2078 +mendoza MACH_MENDOZA MENDOZA 2079 +kira MACH_KIRA KIRA 2080 +mx1hbm MACH_MX1HBM MX1HBM 2081 +quatro43xx MACH_QUATRO43XX QUATRO43XX 2082 +quatro4230 MACH_QUATRO4230 QUATRO4230 2083 +nsb400 MACH_NSB400 NSB400 2084 +drp255 MACH_DRP255 DRP255 2085 +thoth MACH_THOTH THOTH 2086 +firestone MACH_FIRESTONE FIRESTONE 2087 +asusp750 MACH_ASUSP750 ASUSP750 2088 +ctera_dl MACH_CTERA_DL CTERA_DL 2089 +socr MACH_SOCR SOCR 2090 +htcoxygen MACH_HTCOXYGEN HTCOXYGEN 2091 +heroc MACH_HEROC HEROC 2092 +zeno6800 MACH_ZENO6800 ZENO6800 2093 +sc2mcs MACH_SC2MCS SC2MCS 2094 +gene100 MACH_GENE100 GENE100 2095 +as353x MACH_AS353X AS353X 2096 +sheevaplug MACH_SHEEVAPLUG SHEEVAPLUG 2097 +at91sam9g20 MACH_AT91SAM9G20 AT91SAM9G20 2098 +mv88f6192gtw_fe MACH_MV88F6192GTW_FE MV88F6192GTW_FE 2099 +cc9200 MACH_CC9200 CC9200 2100 +sm9200 MACH_SM9200 SM9200 2101 +tp9200 MACH_TP9200 TP9200 2102 +snapperdv MACH_SNAPPERDV SNAPPERDV 2103 +avengers_lite MACH_AVENGERS_LITE AVENGERS_LITE 2104 +avengers_lite1 MACH_AVENGERS_LITE1 AVENGERS_LITE1 2105 +omap3axon MACH_OMAP3AXON OMAP3AXON 2106 +ma8xx MACH_MA8XX MA8XX 2107 +mp201ek MACH_MP201EK MP201EK 2108 +davinci_tux MACH_DAVINCI_TUX DAVINCI_TUX 2109 +mpa1600 MACH_MPA1600 MPA1600 2110 +pelco_troy MACH_PELCO_TROY PELCO_TROY 2111 +nsb667 MACH_NSB667 NSB667 2112 +rovers5_4mpix MACH_ROVERS5_4MPIX ROVERS5_4MPIX 2113 +twocom MACH_TWOCOM TWOCOM 2114 +ubisys_p9_rcu3r2 MACH_UBISYS_P9_RCU3R2 UBISYS_P9_RCU3R2 2115 +hero_espresso MACH_HERO_ESPRESSO HERO_ESPRESSO 2116 +afeusb MACH_AFEUSB AFEUSB 2117 +t830 MACH_T830 T830 2118 +spd8020_cc MACH_SPD8020_CC SPD8020_CC 2119 +om_3d7k MACH_OM_3D7K OM_3D7K 2120 +picocom2 MACH_PICOCOM2 PICOCOM2 2121 +uwg4mx27 MACH_UWG4MX27 UWG4MX27 2122 +uwg4mx31 MACH_UWG4MX31 UWG4MX31 2123 +cherry MACH_CHERRY CHERRY 2124 +mx51_babbage MACH_MX51_BABBAGE MX51_BABBAGE 2125 +s3c2440turkiye MACH_S3C2440TURKIYE S3C2440TURKIYE 2126 +tx37 MACH_TX37 TX37 2127 +sbc2800_9g20 MACH_SBC2800_9G20 SBC2800_9G20 2128 +benzglb MACH_BENZGLB BENZGLB 2129 +benztd MACH_BENZTD BENZTD 2130 +cartesio_plus MACH_CARTESIO_PLUS CARTESIO_PLUS 2131 +solrad_g20 MACH_SOLRAD_G20 SOLRAD_G20 2132 +mx27wallace MACH_MX27WALLACE MX27WALLACE 2133 +fmzwebmodul MACH_FMZWEBMODUL FMZWEBMODUL 2134 +rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135 +smallogger MACH_SMALLOGGER SMALLOGGER 2136 -- cgit v1.2.3 From 1522ac3ec95ff0230e7aa516f86b674fdf72866c Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 12 Mar 2009 17:03:48 +0000 Subject: [ARM] Fix virtual to physical translation macro corner cases The current use of these macros works well when the conversion is entirely linear. In this case, we can be assured that the following holds true: __va(p + s) - s = __va(p) However, this is not always the case, especially when there is a non-linear conversion (eg, when there is a 3.5GB hole in memory.) In this case, if 's' is the size of the region (eg, PAGE_SIZE) and 'p' is the final page, the above is most definitely not true. So, we must ensure that __va() and __pa() are only used with valid kernel direct mapped RAM addresses. This patch tweaks the code to achieve this. Tested-by: Charles Moschel Signed-off-by: Russell King --- arch/arm/mm/dma-mapping.c | 20 ++++++++++++-------- arch/arm/mm/init.c | 2 +- arch/arm/mm/mmap.c | 2 +- 3 files changed, 14 insertions(+), 10 deletions(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 310e479309ef..f1ef5613ccd4 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -490,26 +490,30 @@ core_initcall(consistent_init); */ void dma_cache_maint(const void *start, size_t size, int direction) { - const void *end = start + size; + void (*inner_op)(const void *, const void *); + void (*outer_op)(unsigned long, unsigned long); - BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1)); + BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1)); switch (direction) { case DMA_FROM_DEVICE: /* invalidate only */ - dmac_inv_range(start, end); - outer_inv_range(__pa(start), __pa(end)); + inner_op = dmac_inv_range; + outer_op = outer_inv_range; break; case DMA_TO_DEVICE: /* writeback only */ - dmac_clean_range(start, end); - outer_clean_range(__pa(start), __pa(end)); + inner_op = dmac_clean_range; + outer_op = outer_clean_range; break; case DMA_BIDIRECTIONAL: /* writeback and invalidate */ - dmac_flush_range(start, end); - outer_flush_range(__pa(start), __pa(end)); + inner_op = dmac_flush_range; + outer_op = outer_flush_range; break; default: BUG(); } + + inner_op(start, start + size); + outer_op(__pa(start), __pa(start) + size); } EXPORT_SYMBOL(dma_cache_maint); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 34df4d9d03a6..80fd3b69ae1f 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -382,7 +382,7 @@ void __init bootmem_init(void) for_each_node(node) bootmem_free_node(node, mi); - high_memory = __va(memend_pfn << PAGE_SHIFT); + high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1; /* * This doesn't seem to be used by the Linux memory manager any diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 5358fcc7f61e..f7457fea6de8 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -124,7 +124,7 @@ int valid_phys_addr_range(unsigned long addr, size_t size) { if (addr < PHYS_OFFSET) return 0; - if (addr + size > __pa(high_memory)) + if (addr + size >= __pa(high_memory - 1)) return 0; return 1; -- cgit v1.2.3 From 86d6f2bf61eb2a28fa63c0a19330d36226426477 Mon Sep 17 00:00:00 2001 From: Renzo Davoli Date: Thu, 12 Mar 2009 14:31:23 -0700 Subject: UML on UML fixed: it did not start It is currently impossible to run a user-mode linux machine inside another user-mode linux (UML on UML). It breaks after a few instructions. When it tries to check whether SYSEMU is installed (the inner) UML receives an inconsistent result (from the outer UML). This is the output of a broken attempt: $ ./linux mem=256m ubd0=cow Locating the bottom of the address space ... 0x0 Locating the top of the address space ... 0xc0000000 Core dump limits : soft - 0 hard - NONE Checking that ptrace can change system call numbers...OK Checking ptrace new tags for syscall emulation...unsupported Checking syscall emulation patch for ptrace...check_sysemu : expected SIGTRAP, got status = 256 $ The problem is the following: PTRACE_SYSCALL/SINGLESTEP is currently managed inside arch_ptrace for ARCH=um. PTRACE_SYSEMU/SUSEMU_SINGLESTEP is not captured in arch_ptrace's switch, therefore it is erroneously passed back to ptrace_request (in kernel/ptrace). This simple patch simply forces ptrace to return an error on PTRACE_SYSEMU/SUSEMU_SINGLESTEP as it is unsupported on ARCH=um, and fixes the problem. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Renzo Davoli Reviewed-by: WANG Cong Cc: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/ptrace.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 15e8b7c4de13..8e3d69e4fcb5 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -64,6 +64,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) ret = poke_user(child, addr, data); break; + case PTRACE_SYSEMU: + case PTRACE_SYSEMU_SINGLESTEP: + ret = -EIO; + break; + /* continue and stop at next (return from) syscall */ case PTRACE_SYSCALL: /* restart after signal. */ -- cgit v1.2.3 From 00699e8472cc0209d57b5c5614bc2ec98e665004 Mon Sep 17 00:00:00 2001 From: "akpm@linux-foundation.org" Date: Thu, 12 Mar 2009 14:31:24 -0700 Subject: uml: fix WARNING: vmlinux: 'memcpy' exported twice Fix the following warning on x86_64: LD vmlinux.o MODPOST vmlinux.o WARNING: vmlinux: 'memcpy' exported twice. Previous export was in vmlinux For x86_64, this symbol is already exported from arch/um/sys-x86_64/ksyms.c. Reported-by: Boaz Harrosh Signed-off-by: WANG Cong Tested-by: Boaz Harrosh Cc: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/os-Linux/user_syms.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c index 74f49bb9b125..89b48a116a89 100644 --- a/arch/um/os-Linux/user_syms.c +++ b/arch/um/os-Linux/user_syms.c @@ -14,7 +14,6 @@ #undef memset extern size_t strlen(const char *); -extern void *memcpy(void *, const void *, size_t); extern void *memmove(void *, const void *, size_t); extern void *memset(void *, int, size_t); extern int printf(const char *, ...); @@ -24,7 +23,11 @@ extern int printf(const char *, ...); EXPORT_SYMBOL(strstr); #endif +#ifndef __x86_64__ +extern void *memcpy(void *, const void *, size_t); EXPORT_SYMBOL(memcpy); +#endif + EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(printf); -- cgit v1.2.3 From 8d0df7a3d1ecbaf5d5602a59055c8ca993855bed Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 12 Mar 2009 14:31:25 -0700 Subject: drivers/w1/masters/w1-gpio.c: fix read_bit() W1 master implementations are expected to return 0 or 1 from their read_bit() function. However, not all platforms do return these values from gpio_get_value() - namely PXAs won't. Hence the w1 gpio-master needs to break the result down to 0 or 1 itself. Signed-off-by: Daniel Mack Cc: Ville Syrjala Cc: Evgeniy Polyakov Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/masters/w1-gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c index 9e1138a75e8b..a411702413d6 100644 --- a/drivers/w1/masters/w1-gpio.c +++ b/drivers/w1/masters/w1-gpio.c @@ -39,7 +39,7 @@ static u8 w1_gpio_read_bit(void *data) { struct w1_gpio_platform_data *pdata = data; - return gpio_get_value(pdata->pin); + return gpio_get_value(pdata->pin) ? 1 : 0; } static int __init w1_gpio_probe(struct platform_device *pdev) -- cgit v1.2.3 From e5bc49ba7439b9726006d031d440cba96819f0f8 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 12 Mar 2009 14:31:28 -0700 Subject: pipe_rdwr_fasync: fix the error handling to prevent the leak/crash If the second fasync_helper() fails, pipe_rdwr_fasync() returns the error but leaves the file on ->fasync_readers. This was always wrong, but since 233e70f4228e78eb2f80dc6650f65d3ae3dbf17c "saner FASYNC handling on file close" we have the new problem. Because in this case setfl() doesn't set FASYNC bit, __fput() will not do ->fasync(0), and we leak fasync_struct with ->fa_file pointing to the freed file. Signed-off-by: Oleg Nesterov Cc: Al Viro Cc: Andi Kleen Cc: Jonathan Corbet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/pipe.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/pipe.c b/fs/pipe.c index 3a48ba5179d5..14f502b89cf5 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -699,12 +699,12 @@ pipe_rdwr_fasync(int fd, struct file *filp, int on) int retval; mutex_lock(&inode->i_mutex); - retval = fasync_helper(fd, filp, on, &pipe->fasync_readers); - - if (retval >= 0) + if (retval >= 0) { retval = fasync_helper(fd, filp, on, &pipe->fasync_writers); - + if (retval < 0) /* this can happen only if on == T */ + fasync_helper(-1, filp, 0, &pipe->fasync_readers); + } mutex_unlock(&inode->i_mutex); if (retval < 0) -- cgit v1.2.3 From a3cfbb53b1764a3d1f58ddc032737ab9edaa7d41 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 12 Mar 2009 14:31:29 -0700 Subject: vfs: add missing unlock in sget() In sget(), destroy_super(s) is called with s->s_umount held, which makes lockdep unhappy. Signed-off-by: Li Zefan Cc: Al Viro Acked-by: Peter Zijlstra Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/super.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/super.c b/fs/super.c index 8349ed6b1412..6ce501447ada 100644 --- a/fs/super.c +++ b/fs/super.c @@ -371,8 +371,10 @@ retry: continue; if (!grab_super(old)) goto retry; - if (s) + if (s) { + up_write(&s->s_umount); destroy_super(s); + } return old; } } @@ -387,6 +389,7 @@ retry: err = set(s, data); if (err) { spin_unlock(&sb_lock); + up_write(&s->s_umount); destroy_super(s); return ERR_PTR(err); } -- cgit v1.2.3 From a4e3f91b98d86ae0b5c816fe45190bb29ac32f71 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 12 Mar 2009 14:31:30 -0700 Subject: ds2760_battery.c: fix division by zero The 'battery remaining capacity' calculation in drivers/power/ds2760_battery.c lacks a parameter check to a division operation which causes the kernel to oops on my board. [ 21.233750] Division by zero in kernel. [ 21.237646] [] (__div0+0x0/0x20) from [] (Ldiv0+0x8/0x10) [ 21.244816] [] (ds2760_battery_read_status+0x0/0x2a4) from [] (ds2760_battery_get_property+0x30/0xdc) [ 21.255803] r8:c03a22c0 r7:c7886100 r6:00000009 r5:c782fe7c r4:c7886084 [ 21.262518] [] (ds2760_battery_get_property+0x0/0xdc) from [] (power_supply_show_property+0x48/0x114) [ 21.273480] r6:c7996000 r5:00000009 r4:00000000 [ 21.278111] [] (power_supply_show_property+0x0/0x114) from [] (power_supply_uevent+0x188/0x280) [ 21.288537] r8:00000001 r7:c7886100 r6:c7996000 r5:000000b4 r4:00000000 [ 21.295222] [] (power_supply_uevent+0x0/0x280) from [] (dev_uevent+0xd4/0x10c) [ 21.304199] [] (dev_uevent+0x0/0x10c) from [] (kobject_uevent_env+0x180/0x390) [ 21.313170] r5:00000000 r4:c78860ac [ 21.316725] [] (kobject_uevent_env+0x0/0x390) from [] (kobject_uevent+0x14/0x18) [ 21.325850] [] (kobject_uevent+0x0/0x18) from [] (power_supply_changed_work+0x5c/0x70) [ 21.335506] [] (power_supply_changed_work+0x0/0x70) from [] (run_workqueue+0xbc/0x144) [ 21.345167] r4:c7812040 [ 21.347716] [] (run_workqueue+0x0/0x144) from [] (worker_thread+0xa8/0xbc) [ 21.356296] r7:c7812040 r6:c7820b00 r5:c782ffa4 r4:c7812048 [ 21.361957] [] (worker_thread+0x0/0xbc) from [] (kthread+0x5c/0x94) [ 21.369971] r7:00000000 r6:c004d8a4 r5:c7812040 r4:c782e000 [ 21.375612] [] (kthread+0x0/0x94) from [] (do_exit+0x0/0x688) Signed-off-by: Daniel Mack Cc: Szabolcs Gyurko Acked-by: Matt Reimer Acked-by: Anton Vorontsov Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/power/ds2760_battery.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index 1d768928e0bb..a52d4a11652d 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -180,10 +180,13 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di) di->empty_uAh = battery_interpolate(scale, di->temp_C / 10); di->empty_uAh *= 1000; /* convert to µAh */ - /* From Maxim Application Note 131: remaining capacity = - * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */ - di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) / - (di->full_active_uAh - di->empty_uAh); + if (di->full_active_uAh == di->empty_uAh) + di->rem_capacity = 0; + else + /* From Maxim Application Note 131: remaining capacity = + * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */ + di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) / + (di->full_active_uAh - di->empty_uAh); if (di->rem_capacity < 0) di->rem_capacity = 0; -- cgit v1.2.3 From 1b53dc74ef957f134d93e989150f983e92fb88e3 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Thu, 12 Mar 2009 14:31:32 -0700 Subject: MAINTAINERS: downgrade support for man-pages Unfortunately, Linux Foundation funding for my work on man-pages/testing/doc under the auspices of the LF documentation fellowship unfortunately ran out a short while ago (after earlier attempts to seek funding, only Google stepped forward with a bit of further funding for the position), so the patch below acknowledges something closer to reality. Unfortunately, there will (probably very) soon be a further downgrade from "Maintained" to "Odd Fixes" or "Orphan", unless some funding miracle occurs. So, if anyone is looking to become man-pages maintainer, there may soon be an opening (okay, don't trample me in the rush ;-).) Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 1c2ca1dc66f2..61aeb5aae244 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1469,8 +1469,6 @@ L: linux-acpi@vger.kernel.org S: Supported DOCUMENTATION (/Documentation directory) -P: Michael Kerrisk -M: mtk.manpages@gmail.com P: Randy Dunlap M: rdunlap@xenotime.net L: linux-doc@vger.kernel.org @@ -2879,7 +2877,7 @@ P: Michael Kerrisk M: mtk.manpages@gmail.com W: http://www.kernel.org/doc/man-pages L: linux-man@vger.kernel.org -S: Supported +S: Maintained MARVELL LIBERTAS WIRELESS DRIVER P: Dan Williams -- cgit v1.2.3 From 7c48ed3383bfb2106694807361ec187fe8a4333d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 12 Mar 2009 14:31:33 -0700 Subject: mmc: s3cmci: fix s3c2410_dma_config() arguments. The s3cmci driver is calling s3c2410_dma_config with incorrect data for the DCON register. The S3C2410_DCON_HWTRIG is implicit in the channel configuration and the device selection of S3C2410_DCON_CH0_SDI is incorrect as the DMA system may not select channel 0. Signed-off-by: Ben Dooks Acked-by: Pierre Ossman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/s3cmci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index f4a67c65d301..2db166b7096f 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -793,8 +793,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host, host->mem->start + host->sdidata); if (!setup_ok) { - s3c2410_dma_config(host->dma, 4, - (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI)); + s3c2410_dma_config(host->dma, 4, 0); s3c2410_dma_set_buffdone_fn(host->dma, s3cmci_dma_done_callback); s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); -- cgit v1.2.3 From 1ba869ec581fd9078b684c56c399ffe3d2345e27 Mon Sep 17 00:00:00 2001 From: Michael Spang Date: Thu, 12 Mar 2009 14:31:34 -0700 Subject: acer-wmi: fix regression in backlight detection Currently we disable the Acer WMI backlight device if there is no ACPI backlight device. As a result, we end up with no backlight device at all. We should instead disable it if there is an ACPI device, as the other laptop drivers do. This regression was introduced in febf2d9 ("Acer-WMI: fingers off backlight if video.ko is serving this functionality"). Each laptop driver with backlight support got a similar change around febf2d9. The changes to the other drivers look correct; see e.g. a598c82f for a similar but correct change. The regression is also in 2.6.28. Signed-off-by: Michael Spang Acked-by: Thomas Renninger Cc: Zhang Rui Cc: Andi Kleen Cc: Carlos Corbacho Cc: Len Brown Cc: "Rafael J. Wysocki" Cc: [2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/acer-wmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 94c9f911824e..6bcca616a704 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -1297,7 +1297,7 @@ static int __init acer_wmi_init(void) set_quirks(); - if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) { + if (acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) { interface->capability &= ~ACER_CAP_BRIGHTNESS; printk(ACER_INFO "Brightness must be controlled by " "generic video driver\n"); -- cgit v1.2.3 From 02d46e07e538c285accb5c000a7db3a97eff1fbf Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 12 Mar 2009 14:31:36 -0700 Subject: mfd: add support for WM8351 revision B No software visible difference from revision A. Signed-off-by: Mark Brown Cc: Samuel Ortiz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mfd/wm8350-core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 84d5ea1ec171..b457a05b28d9 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1383,6 +1383,11 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, wm8350->power.rev_g_coeff = 1; break; + case 1: + dev_info(wm8350->dev, "WM8351 Rev B\n"); + wm8350->power.rev_g_coeff = 1; + break; + default: dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n"); ret = -ENODEV; -- cgit v1.2.3 From f272b7bc447553410dde691aa31fc531adf9c175 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Thu, 12 Mar 2009 14:31:36 -0700 Subject: memcg: use correct scan number at reclaim Even when page reclaim is under mem_cgroup, # of scan page is determined by status of global LRU. Fix that. Signed-off-by: KOSAKI Motohiro Signed-off-by: KAMEZAWA Hiroyuki Cc: Daisuke Nishimura Cc: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index 6177e3bcd66b..e89517141657 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1469,7 +1469,7 @@ static void shrink_zone(int priority, struct zone *zone, int file = is_file_lru(l); int scan; - scan = zone_page_state(zone, NR_LRU_BASE + l); + scan = zone_nr_pages(zone, sc, l); if (priority) { scan >>= priority; scan = (scan * percent[file]) / 100; -- cgit v1.2.3 From 7ef0d7377cb287e08f3ae94cebc919448e1f5dff Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 12 Mar 2009 14:31:38 -0700 Subject: fs: new inode i_state corruption fix There was a report of a data corruption http://lkml.org/lkml/2008/11/14/121. There is a script included to reproduce the problem. During testing, I encountered a number of strange things with ext3, so I tried ext2 to attempt to reduce complexity of the problem. I found that fsstress would quickly hang in wait_on_inode, waiting for I_LOCK to be cleared, even though instrumentation showed that unlock_new_inode had already been called for that inode. This points to memory scribble, or synchronisation problme. i_state of I_NEW inodes is not protected by inode_lock because other processes are not supposed to touch them until I_LOCK (and I_NEW) is cleared. Adding WARN_ON(inode->i_state & I_NEW) to sites where we modify i_state revealed that generic_sync_sb_inodes is picking up new inodes from the inode lists and passing them to __writeback_single_inode without waiting for I_NEW. Subsequently modifying i_state causes corruption. In my case it would look like this: CPU0 CPU1 unlock_new_inode() __sync_single_inode() reg <- inode->i_state reg -> reg & ~(I_LOCK|I_NEW) reg <- inode->i_state reg -> inode->i_state reg -> reg | I_SYNC reg -> inode->i_state Non-atomic RMW on CPU1 overwrites CPU0 store and sets I_LOCK|I_NEW again. Fix for this is rather than wait for I_NEW inodes, just skip over them: inodes concurrently being created are not subject to data integrity operations, and should not significantly contribute to dirty memory either. After this change, I'm unable to reproduce any of the added warnings or hangs after ~1hour of running. Previously, the new warnings would start immediately and hang would happen in under 5 minutes. I'm also testing on ext3 now, and so far no problems there either. I don't know whether this fixes the problem reported above, but it fixes a real problem for me. Cc: "Jorge Boncompte [DTI2]" Reported-by: Adrian Hunter Cc: Jan Kara Cc: Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fs-writeback.c | 9 ++++++++- fs/inode.c | 7 +++++++ 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index e5eaa62fd17f..e3fe9918faaf 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -274,6 +274,7 @@ __sync_single_inode(struct inode *inode, struct writeback_control *wbc) int ret; BUG_ON(inode->i_state & I_SYNC); + WARN_ON(inode->i_state & I_NEW); /* Set I_SYNC, reset I_DIRTY */ dirty = inode->i_state & I_DIRTY; @@ -298,6 +299,7 @@ __sync_single_inode(struct inode *inode, struct writeback_control *wbc) } spin_lock(&inode_lock); + WARN_ON(inode->i_state & I_NEW); inode->i_state &= ~I_SYNC; if (!(inode->i_state & I_FREEING)) { if (!(inode->i_state & I_DIRTY) && @@ -470,6 +472,11 @@ void generic_sync_sb_inodes(struct super_block *sb, break; } + if (inode->i_state & I_NEW) { + requeue_io(inode); + continue; + } + if (wbc->nonblocking && bdi_write_congested(bdi)) { wbc->encountered_congestion = 1; if (!sb_is_blkdev_sb(sb)) @@ -531,7 +538,7 @@ void generic_sync_sb_inodes(struct super_block *sb, list_for_each_entry(inode, &sb->s_inodes, i_sb_list) { struct address_space *mapping; - if (inode->i_state & (I_FREEING|I_WILL_FREE)) + if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) continue; mapping = inode->i_mapping; if (mapping->nrpages == 0) diff --git a/fs/inode.c b/fs/inode.c index 913ab2d9a5d1..826fb0b9d1c3 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -359,6 +359,7 @@ static int invalidate_list(struct list_head *head, struct list_head *dispose) invalidate_inode_buffers(inode); if (!atomic_read(&inode->i_count)) { list_move(&inode->i_list, dispose); + WARN_ON(inode->i_state & I_NEW); inode->i_state |= I_FREEING; count++; continue; @@ -460,6 +461,7 @@ static void prune_icache(int nr_to_scan) continue; } list_move(&inode->i_list, &freeable); + WARN_ON(inode->i_state & I_NEW); inode->i_state |= I_FREEING; nr_pruned++; } @@ -656,6 +658,7 @@ void unlock_new_inode(struct inode *inode) * just created it (so there can be no old holders * that haven't tested I_LOCK). */ + WARN_ON((inode->i_state & (I_LOCK|I_NEW)) != (I_LOCK|I_NEW)); inode->i_state &= ~(I_LOCK|I_NEW); wake_up_inode(inode); } @@ -1145,6 +1148,7 @@ void generic_delete_inode(struct inode *inode) list_del_init(&inode->i_list); list_del_init(&inode->i_sb_list); + WARN_ON(inode->i_state & I_NEW); inode->i_state |= I_FREEING; inodes_stat.nr_inodes--; spin_unlock(&inode_lock); @@ -1186,16 +1190,19 @@ static void generic_forget_inode(struct inode *inode) spin_unlock(&inode_lock); return; } + WARN_ON(inode->i_state & I_NEW); inode->i_state |= I_WILL_FREE; spin_unlock(&inode_lock); write_inode_now(inode, 1); spin_lock(&inode_lock); + WARN_ON(inode->i_state & I_NEW); inode->i_state &= ~I_WILL_FREE; inodes_stat.nr_unused--; hlist_del_init(&inode->i_hash); } list_del_init(&inode->i_list); list_del_init(&inode->i_sb_list); + WARN_ON(inode->i_state & I_NEW); inode->i_state |= I_FREEING; inodes_stat.nr_inodes--; spin_unlock(&inode_lock); -- cgit v1.2.3 From c12e56ef6951f4fce1afe9ef6aab9243ea9a9b04 Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Thu, 12 Mar 2009 14:34:59 -0700 Subject: RDMA/nes: Don't allow userspace QPs to use STag zero STag zero is a special STag that allows consumers to access any bus address without registering memory. The nes driver unfortunately allows STag zero to be used even with QPs created by unprivileged userspace consumers, which means that any process with direct verbs access to the nes device can read and write any memory accessible to the underlying PCI device (usually any memory in the system). Such access is usually given for cluster software such as MPI to use, so this is a local privilege escalation bug on most systems running this driver. The driver was using STag zero to receive the last streaming mode data; to allow STag zero to be disabled for unprivileged QPs, the driver now registers a special MR for this data. Cc: Signed-off-by: Faisal Latif Signed-off-by: Roland Dreier Signed-off-by: Linus Torvalds --- drivers/infiniband/hw/nes/nes_cm.c | 39 ++++++++++++++++++++++++++++++----- drivers/infiniband/hw/nes/nes_verbs.c | 2 ++ drivers/infiniband/hw/nes/nes_verbs.h | 1 + 3 files changed, 37 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index a01b4488208b..4a65b96db2c8 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -2490,12 +2490,14 @@ static int nes_disconnect(struct nes_qp *nesqp, int abrupt) int ret = 0; struct nes_vnic *nesvnic; struct nes_device *nesdev; + struct nes_ib_device *nesibdev; nesvnic = to_nesvnic(nesqp->ibqp.device); if (!nesvnic) return -EINVAL; nesdev = nesvnic->nesdev; + nesibdev = nesvnic->nesibdev; nes_debug(NES_DBG_CM, "netdev refcnt = %u.\n", atomic_read(&nesvnic->netdev->refcnt)); @@ -2507,6 +2509,8 @@ static int nes_disconnect(struct nes_qp *nesqp, int abrupt) } else { /* Need to free the Last Streaming Mode Message */ if (nesqp->ietf_frame) { + if (nesqp->lsmm_mr) + nesibdev->ibdev.dereg_mr(nesqp->lsmm_mr); pci_free_consistent(nesdev->pcidev, nesqp->private_data_len+sizeof(struct ietf_mpa_frame), nesqp->ietf_frame, nesqp->ietf_frame_pbase); @@ -2543,6 +2547,12 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) u32 crc_value; int ret; int passive_state; + struct nes_ib_device *nesibdev; + struct ib_mr *ibmr = NULL; + struct ib_phys_buf ibphysbuf; + struct nes_pd *nespd; + + ibqp = nes_get_qp(cm_id->device, conn_param->qpn); if (!ibqp) @@ -2601,6 +2611,26 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) if (cm_id->remote_addr.sin_addr.s_addr != cm_id->local_addr.sin_addr.s_addr) { u64temp = (unsigned long)nesqp; + nesibdev = nesvnic->nesibdev; + nespd = nesqp->nespd; + ibphysbuf.addr = nesqp->ietf_frame_pbase; + ibphysbuf.size = conn_param->private_data_len + + sizeof(struct ietf_mpa_frame); + ibmr = nesibdev->ibdev.reg_phys_mr((struct ib_pd *)nespd, + &ibphysbuf, 1, + IB_ACCESS_LOCAL_WRITE, + (u64 *)&nesqp->ietf_frame); + if (!ibmr) { + nes_debug(NES_DBG_CM, "Unable to register memory region" + "for lSMM for cm_node = %p \n", + cm_node); + return -ENOMEM; + } + + ibmr->pd = &nespd->ibpd; + ibmr->device = nespd->ibpd.device; + nesqp->lsmm_mr = ibmr; + u64temp |= NES_SW_CONTEXT_ALIGN>>1; set_wqe_64bit_value(wqe->wqe_words, NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX, @@ -2611,14 +2641,13 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] = cpu_to_le32(conn_param->private_data_len + sizeof(struct ietf_mpa_frame)); - wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] = - cpu_to_le32((u32)nesqp->ietf_frame_pbase); - wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] = - cpu_to_le32((u32)((u64)nesqp->ietf_frame_pbase >> 32)); + set_wqe_64bit_value(wqe->wqe_words, + NES_IWARP_SQ_WQE_FRAG0_LOW_IDX, + (u64)nesqp->ietf_frame); wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] = cpu_to_le32(conn_param->private_data_len + sizeof(struct ietf_mpa_frame)); - wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0; + wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = ibmr->lkey; nesqp->nesqp_context->ird_ord_sizes |= cpu_to_le32(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT | diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 4fdb72454f94..d93a6562817c 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -1360,8 +1360,10 @@ static struct ib_qp *nes_create_qp(struct ib_pd *ibpd, NES_QPCONTEXT_MISC_RQ_SIZE_SHIFT); nesqp->nesqp_context->misc |= cpu_to_le32((u32)nesqp->hwqp.sq_encoded_size << NES_QPCONTEXT_MISC_SQ_SIZE_SHIFT); + if (!udata) { nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_PRIV_EN); nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_FAST_REGISTER_EN); + } nesqp->nesqp_context->cqs = cpu_to_le32(nesqp->nesscq->hw_cq.cq_number + ((u32)nesqp->nesrcq->hw_cq.cq_number << 16)); u64temp = (u64)nesqp->hwqp.sq_pbase; diff --git a/drivers/infiniband/hw/nes/nes_verbs.h b/drivers/infiniband/hw/nes/nes_verbs.h index 6c6b4da5184f..ae0ca9bc83bd 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.h +++ b/drivers/infiniband/hw/nes/nes_verbs.h @@ -134,6 +134,7 @@ struct nes_qp { struct ietf_mpa_frame *ietf_frame; dma_addr_t ietf_frame_pbase; wait_queue_head_t state_waitq; + struct ib_mr *lsmm_mr; unsigned long socket; struct nes_hw_qp hwqp; struct work_struct work; -- cgit v1.2.3 From ab03eca8d4754ef2ba9821d581975b10b8f317e7 Mon Sep 17 00:00:00 2001 From: Jody McIntyre Date: Thu, 12 Mar 2009 17:39:23 -0400 Subject: trivial: fix bad links in the ext2 and ext3 documentation Trivial patch to fix bad links in the ext2 and ext3 documentation. Signed-off-by: Jody McIntyre Signed-off-by: Linus Torvalds --- Documentation/filesystems/ext2.txt | 10 +++++----- Documentation/filesystems/ext3.txt | 4 ++-- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt index 4333e836c495..23448551cabe 100644 --- a/Documentation/filesystems/ext2.txt +++ b/Documentation/filesystems/ext2.txt @@ -373,10 +373,10 @@ Filesystem Resizing http://ext2resize.sourceforge.net/ Compression (*) http://e2compr.sourceforge.net/ Implementations for: -Windows 95/98/NT/2000 http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm -Windows 95 (*) http://www.yipton.demon.co.uk/content.html#FSDEXT2 +Windows 95/98/NT/2000 http://www.chrysocome.net/explore2fs +Windows 95 (*) http://www.yipton.net/content.html#FSDEXT2 DOS client (*) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/ -OS/2 http://perso.wanadoo.fr/matthieu.willm/ext2-os2/ -RISC OS client ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/ +OS/2 (*) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/ +RISC OS client http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/ -(*) no longer actively developed/supported (as of Apr 2001) +(*) no longer actively developed/supported (as of Mar 2009) diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt index 9dd2a3bb2acc..e5f3833a6ef8 100644 --- a/Documentation/filesystems/ext3.txt +++ b/Documentation/filesystems/ext3.txt @@ -198,5 +198,5 @@ kernel source: programs: http://e2fsprogs.sourceforge.net/ http://ext2resize.sourceforge.net -useful links: http://www-106.ibm.com/developerworks/linux/library/l-fs7/ - http://www-106.ibm.com/developerworks/linux/library/l-fs8/ +useful links: http://www.ibm.com/developerworks/library/l-fs7.html + http://www.ibm.com/developerworks/library/l-fs8.html -- cgit v1.2.3 From 6c9fd1dc0a597e575617a7de7086c8a3efa8f524 Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Fri, 6 Mar 2009 10:19:30 +0800 Subject: ocfs2: reserve xattr block for new directory with inline data If this is a new directory with inline data, we choose to reserve the entire inline area for directory contents and force an external xattr block. Signed-off-by: Tiger Yang Acked-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 4ddd788add67..c63efb5ef136 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -547,8 +547,12 @@ int ocfs2_calc_xattr_init(struct inode *dir, * when blocksize = 512, may reserve one more cluser for * xattr bucket, otherwise reserve one metadata block * for them is ok. + * If this is a new directory with inline data, + * we choose to reserve the entire inline area for + * directory contents and force an external xattr block. */ if (dir->i_sb->s_blocksize == OCFS2_MIN_BLOCKSIZE || + (S_ISDIR(mode) && ocfs2_supports_inline_data(osb)) || (s_size + a_size) > OCFS2_XATTR_FREE_IN_IBODY) { ret = ocfs2_reserve_new_metadata_blocks(osb, 1, xattr_ac); if (ret) { -- cgit v1.2.3 From d9ae49d6e2b1ac9166e58ae3c9345135604beaa6 Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Thu, 5 Mar 2009 11:06:15 +0800 Subject: ocfs2: tweak to get the maximum inline data size with xattr Replace max_inline_data with max_inline_data_with_xattr to ensure it correct when xattr inlined. Signed-off-by: Tiger Yang Acked-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/aops.c | 7 +++++-- fs/ocfs2/namei.c | 3 ++- fs/ocfs2/ocfs2_fs.h | 6 ------ 3 files changed, 7 insertions(+), 9 deletions(-) diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index a067a6cffb01..8e1709a679b7 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -227,7 +227,7 @@ int ocfs2_read_inline_data(struct inode *inode, struct page *page, size = i_size_read(inode); if (size > PAGE_CACHE_SIZE || - size > ocfs2_max_inline_data(inode->i_sb)) { + size > ocfs2_max_inline_data_with_xattr(inode->i_sb, di)) { ocfs2_error(inode->i_sb, "Inode %llu has with inline data has bad size: %Lu", (unsigned long long)OCFS2_I(inode)->ip_blkno, @@ -1555,6 +1555,7 @@ static int ocfs2_try_to_write_inline_data(struct address_space *mapping, int ret, written = 0; loff_t end = pos + len; struct ocfs2_inode_info *oi = OCFS2_I(inode); + struct ocfs2_dinode *di = NULL; mlog(0, "Inode %llu, write of %u bytes at off %llu. features: 0x%x\n", (unsigned long long)oi->ip_blkno, len, (unsigned long long)pos, @@ -1587,7 +1588,9 @@ static int ocfs2_try_to_write_inline_data(struct address_space *mapping, /* * Check whether the write can fit. */ - if (mmap_page || end > ocfs2_max_inline_data(inode->i_sb)) + di = (struct ocfs2_dinode *)wc->w_di_bh->b_data; + if (mmap_page || + end > ocfs2_max_inline_data_with_xattr(inode->i_sb, di)) return 0; do_inline_write: diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index 084aba86c3b2..4b11762f249e 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -532,7 +532,8 @@ static int ocfs2_mknod_locked(struct ocfs2_super *osb, fe->i_dyn_features = cpu_to_le16(feat | OCFS2_INLINE_DATA_FL); - fe->id2.i_data.id_count = cpu_to_le16(ocfs2_max_inline_data(osb->sb)); + fe->id2.i_data.id_count = cpu_to_le16( + ocfs2_max_inline_data_with_xattr(osb->sb, fe)); } else { fel = &fe->id2.i_list; fel->l_tree_depth = 0; diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index c7ae45aaa36c..2332ef740f4f 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -1070,12 +1070,6 @@ static inline int ocfs2_fast_symlink_chars(struct super_block *sb) offsetof(struct ocfs2_dinode, id2.i_symlink); } -static inline int ocfs2_max_inline_data(struct super_block *sb) -{ - return sb->s_blocksize - - offsetof(struct ocfs2_dinode, id2.i_data.id_data); -} - static inline int ocfs2_max_inline_data_with_xattr(struct super_block *sb, struct ocfs2_dinode *di) { -- cgit v1.2.3 From 74e77eb30d0ecbb12964d005b439c8b84a505b84 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Thu, 12 Mar 2009 06:24:23 +0800 Subject: ocfs2: Fix a bug found by sparse check. We need to use le32_to_cpu to test rec->e_cpos in ocfs2_dinode_insert_check. Signed-off-by: Tao Ma Acked-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/alloc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index 3a9e5deed74d..19e3a96aa02c 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -176,7 +176,8 @@ static int ocfs2_dinode_insert_check(struct inode *inode, BUG_ON(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL); mlog_bug_on_msg(!ocfs2_sparse_alloc(osb) && - (OCFS2_I(inode)->ip_clusters != rec->e_cpos), + (OCFS2_I(inode)->ip_clusters != + le32_to_cpu(rec->e_cpos)), "Device %s, asking for sparse allocation: inode %llu, " "cpos %u, clusters %u\n", osb->dev_str, -- cgit v1.2.3 From 712e53e46a1da35fcd88c05aa0c675b10f7c0e9d Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Thu, 12 Mar 2009 08:37:34 +0800 Subject: ocfs2: Use xs->bucket to set xattr value outside A long time ago, xs->base is allocated a 4K size and all the contents in the bucket are copied to the it. Now we use ocfs2_xattr_bucket to abstract xattr bucket and xs->base is initialized to the start of the bu_bhs[0]. So xs->base + offset will overflow when the value root is stored outside the first block. Then why we can survive the xattr test by now? It is because we always read the bucket contiguously now and kernel mm allocate continguous memory for us. We are lucky, but we should fix it. So just get the right value root as other callers do. Signed-off-by: Tao Ma Acked-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index c63efb5ef136..2563df89fc2a 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -4795,19 +4795,33 @@ static int ocfs2_xattr_bucket_set_value_outside(struct inode *inode, char *val, int value_len) { - int offset; + int ret, offset, block_off; struct ocfs2_xattr_value_root *xv; struct ocfs2_xattr_entry *xe = xs->here; + struct ocfs2_xattr_header *xh = bucket_xh(xs->bucket); + void *base; BUG_ON(!xs->base || !xe || ocfs2_xattr_is_local(xe)); - offset = le16_to_cpu(xe->xe_name_offset) + - OCFS2_XATTR_SIZE(xe->xe_name_len); + ret = ocfs2_xattr_bucket_get_name_value(inode, xh, + xe - xh->xh_entries, + &block_off, + &offset); + if (ret) { + mlog_errno(ret); + goto out; + } - xv = (struct ocfs2_xattr_value_root *)(xs->base + offset); + base = bucket_block(xs->bucket, block_off); + xv = (struct ocfs2_xattr_value_root *)(base + offset + + OCFS2_XATTR_SIZE(xe->xe_name_len)); - return __ocfs2_xattr_set_value_outside(inode, handle, - xv, val, value_len); + ret = __ocfs2_xattr_set_value_outside(inode, handle, + xv, val, value_len); + if (ret) + mlog_errno(ret); +out: + return ret; } static int ocfs2_rm_xattr_cluster(struct inode *inode, -- cgit v1.2.3 From aa8e4fc68d8024cd3132035d13c3cefa7baeac8f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 12 Mar 2009 19:32:51 -0700 Subject: bitmap: fix end condition in bitmap_find_free_region Guennadi Liakhovetski noticed that the end condition for the loop in bitmap_find_free_region() is wrong, and the "return if error" was also using the wrong conditional that would only trigger if the bitmap was an exact multiple of the allocation size, which is not necessarily the case with dma_alloc_from_coherent(). Such a failure would end up in bitmap_find_free_region() accessing beyond the end of the bitmap. Reported-by: Guennadi Liakhovetski Cc: Andrew Morton Signed-off-by: Linus Torvalds --- lib/bitmap.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/lib/bitmap.c b/lib/bitmap.c index 1338469ac849..35a1f7ff4149 100644 --- a/lib/bitmap.c +++ b/lib/bitmap.c @@ -948,15 +948,15 @@ done: */ int bitmap_find_free_region(unsigned long *bitmap, int bits, int order) { - int pos; /* scans bitmap by regions of size order */ + int pos, end; /* scans bitmap by regions of size order */ - for (pos = 0; pos < bits; pos += (1 << order)) - if (__reg_op(bitmap, pos, order, REG_OP_ISFREE)) - break; - if (pos == bits) - return -ENOMEM; - __reg_op(bitmap, pos, order, REG_OP_ALLOC); - return pos; + for (pos = 0 ; (end = pos + (1 << order)) <= bits; pos = end) { + if (!__reg_op(bitmap, pos, order, REG_OP_ISFREE)) + continue; + __reg_op(bitmap, pos, order, REG_OP_ALLOC); + return pos; + } + return -ENOMEM; } EXPORT_SYMBOL(bitmap_find_free_region); -- cgit v1.2.3 From 041b62374c7fedc11a8a1eeda2868612d3d1436c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 12 Mar 2009 19:39:28 -0700 Subject: Linus 2.6.29-rc8 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 5a5b82eaaec2..2e2f4a4324af 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 29 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Erotic Pickled Herring # *DOCUMENTATION* -- cgit v1.2.3 From 5f77af93266e107bd46c010c51d772c0fb003232 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 10 Mar 2009 13:06:40 -0300 Subject: V4L/DVB (10972): zl10353: i2c_gate_ctrl bug fix zl10353 i2c-gate was always closed and due to that devices having tuner behind i2c-gate were broken. Add module configuration which allows disabling i2c-gate only when really needed. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/zl10353.c | 2 +- drivers/media/dvb/frontends/zl10353.h | 3 +++ drivers/media/video/saa7134/saa7134-dvb.c | 1 + 3 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c index 170720b02815..b150ed306696 100644 --- a/drivers/media/dvb/frontends/zl10353.c +++ b/drivers/media/dvb/frontends/zl10353.c @@ -590,7 +590,7 @@ static int zl10353_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) struct zl10353_state *state = fe->demodulator_priv; u8 val = 0x0a; - if (state->config.no_tuner) { + if (state->config.disable_i2c_gate_ctrl) { /* No tuner attached to the internal I2C bus */ /* If set enable I2C bridge, the main I2C bus stopped hardly */ return 0; diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb/frontends/zl10353.h index fdbb88ff75fe..2287bac46243 100644 --- a/drivers/media/dvb/frontends/zl10353.h +++ b/drivers/media/dvb/frontends/zl10353.h @@ -38,6 +38,9 @@ struct zl10353_config /* set if parallel ts output is required */ int parallel_ts; + + /* set if i2c_gate_ctrl disable is required */ + u8 disable_i2c_gate_ctrl:1; }; #if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE)) diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 0776ecf56d27..b5370b3e1a3d 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -860,6 +860,7 @@ static struct zl10353_config behold_h6_config = { .demod_address = 0x1e>>1, .no_tuner = 1, .parallel_ts = 1, + .disable_i2c_gate_ctrl = 1, }; /* ================================================================== -- cgit v1.2.3 From 8980a7baf93e478205e32ec7d6ef3bfb6c0bdfa7 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 6 Jan 2009 12:57:01 +0100 Subject: parisc: BUG_ON() cleanup - convert a few "if (xx) BUG();" to BUG_ON(xx) - remove a few printk()s, as we get a backtrace with BUG_ON() anyway Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/kernel/cache.c | 5 +---- arch/parisc/kernel/pci-dma.c | 22 ++++++---------------- arch/parisc/mm/init.c | 6 ++---- 3 files changed, 9 insertions(+), 24 deletions(-) diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index 5259d8c20676..837530ea32e7 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -551,10 +551,7 @@ void flush_cache_range(struct vm_area_struct *vma, { int sr3; - if (!vma->vm_mm->context) { - BUG(); - return; - } + BUG_ON(!vma->vm_mm->context); sr3 = mfsp(3); if (vma->vm_mm->context == sr3) { diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index df47895db828..7d927eac932b 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -447,10 +447,7 @@ static void pa11_dma_free_consistent (struct device *dev, size_t size, void *vad static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) { - printk(KERN_ERR "pa11_dma_map_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0)); - BUG(); - } + BUG_ON(direction == DMA_NONE); flush_kernel_dcache_range((unsigned long) addr, size); return virt_to_phys(addr); @@ -458,10 +455,7 @@ static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t siz static void pa11_dma_unmap_single(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) { - printk(KERN_ERR "pa11_dma_unmap_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0)); - BUG(); - } + BUG_ON(direction == DMA_NONE); if (direction == DMA_TO_DEVICE) return; @@ -480,8 +474,7 @@ static int pa11_dma_map_sg(struct device *dev, struct scatterlist *sglist, int n { int i; - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); for (i = 0; i < nents; i++, sglist++ ) { unsigned long vaddr = sg_virt_addr(sglist); @@ -496,8 +489,7 @@ static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, in { int i; - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); if (direction == DMA_TO_DEVICE) return; @@ -511,16 +503,14 @@ static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, in static void pa11_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size); } static void pa11_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size); } diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 7c155c254e72..9d704d9831d1 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -304,10 +304,8 @@ static void __init setup_bootmem(void) */ max_low_pfn = max_pfn; - if ((bootmap_pfn - bootmap_start_pfn) != bootmap_pages) { - printk(KERN_WARNING "WARNING! bootmap sizing is messed up!\n"); - BUG(); - } + /* bootmap sizing messed up? */ + BUG_ON((bootmap_pfn - bootmap_start_pfn) != bootmap_pages); /* reserve PAGE0 pdc memory, kernel text/data/bss & bootmap */ -- cgit v1.2.3 From bfe4f4f800ccbb499a1120735016a20d3feacd4f Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 9 Jan 2009 18:57:06 -0600 Subject: parisc: remove klist iterators commit 11c3b5c3e08f4d855cbef52883c266b9ab9df879 Author: Greg Kroah-Hartman Date: Tue Dec 16 12:24:56 2008 -0800 driver core: move klist_children into private structure Broke our parisc build pretty badly because we touch the klists directly in three cases (AGP, SBA and GSC). Although GregKH will revert this patch, there's no reason we should be using the iterators directly, we can just move to the standard device_for_each_child() API. Signed-off-by: James Bottomley Tested-by: Helge Deller Tested-by: Kyle McMartin Signed-off-by: Kyle McMartin --- drivers/char/agp/parisc-agp.c | 23 ++++++++-------- drivers/parisc/gsc.c | 39 +++++++++++++++------------ drivers/parisc/sba_iommu.c | 61 +++++++++++++++++++++++++------------------ 3 files changed, 68 insertions(+), 55 deletions(-) diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c index db60539bf67a..699e3422ad93 100644 --- a/drivers/char/agp/parisc-agp.c +++ b/drivers/char/agp/parisc-agp.c @@ -359,9 +359,16 @@ fail: return error; } -static struct device *next_device(struct klist_iter *i) { - struct klist_node * n = klist_next(i); - return n ? container_of(n, struct device, knode_parent) : NULL; +static int +find_quicksilver(struct device *dev, void *data) +{ + struct parisc_device **lba = data; + struct parisc_device *padev = to_parisc_device(dev); + + if (IS_QUICKSILVER(padev)) + *lba = padev; + + return 0; } static int @@ -372,8 +379,6 @@ parisc_agp_init(void) int err = -1; struct parisc_device *sba = NULL, *lba = NULL; struct lba_device *lbadev = NULL; - struct device *dev = NULL; - struct klist_iter i; if (!sba_list) goto out; @@ -386,13 +391,7 @@ parisc_agp_init(void) } /* Now search our Pluto for our precious AGP device... */ - klist_iter_init(&sba->dev.klist_children, &i); - while ((dev = next_device(&i))) { - struct parisc_device *padev = to_parisc_device(dev); - if (IS_QUICKSILVER(padev)) - lba = padev; - } - klist_iter_exit(&i); + device_for_each_child(&sba->dev, &lba, find_quicksilver); if (!lba) { printk(KERN_INFO DRVPFX "No AGP devices found.\n"); diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c index e76db9e4d504..d33632917696 100644 --- a/drivers/parisc/gsc.c +++ b/drivers/parisc/gsc.c @@ -186,29 +186,34 @@ void gsc_asic_assign_irq(struct gsc_asic *asic, int local_irq, int *irqp) *irqp = irq; } -static struct device *next_device(struct klist_iter *i) +struct gsc_fixup_struct { + void (*choose_irq)(struct parisc_device *, void *); + void *ctrl; +}; + +static int gsc_fixup_irqs_callback(struct device *dev, void *data) { - struct klist_node * n = klist_next(i); - return n ? container_of(n, struct device, knode_parent) : NULL; + struct parisc_device *padev = to_parisc_device(dev); + struct gsc_fixup_struct *gf = data; + + /* work-around for 715/64 and others which have parent + at path [5] and children at path [5/0/x] */ + if (padev->id.hw_type == HPHW_FAULTY) + gsc_fixup_irqs(padev, gf->ctrl, gf->choose_irq); + gf->choose_irq(padev, gf->ctrl); + + return 0; } void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl, void (*choose_irq)(struct parisc_device *, void *)) { - struct device *dev; - struct klist_iter i; - - klist_iter_init(&parent->dev.klist_children, &i); - while ((dev = next_device(&i))) { - struct parisc_device *padev = to_parisc_device(dev); - - /* work-around for 715/64 and others which have parent - at path [5] and children at path [5/0/x] */ - if (padev->id.hw_type == HPHW_FAULTY) - return gsc_fixup_irqs(padev, ctrl, choose_irq); - choose_irq(padev, ctrl); - } - klist_iter_exit(&i); + struct gsc_fixup_struct data = { + .choose_irq = choose_irq, + .ctrl = ctrl, + }; + + device_for_each_child(&parent->dev, &data, gsc_fixup_irqs_callback); } int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic) diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index a70cf16ee1ad..6aad8546fd24 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -1206,31 +1206,49 @@ sba_alloc_pdir(unsigned int pdir_size) return (void *) pdir_base; } -static struct device *next_device(struct klist_iter *i) +struct ibase_data_struct { + struct ioc *ioc; + int ioc_num; +}; + +static int setup_ibase_imask_callback(struct device *dev, void *data) { - struct klist_node * n = klist_next(i); - return n ? container_of(n, struct device, knode_parent) : NULL; + /* lba_set_iregs() is in drivers/parisc/lba_pci.c */ + extern void lba_set_iregs(struct parisc_device *, u32, u32); + struct parisc_device *lba = to_parisc_device(dev); + struct ibase_data_struct *ibd = data; + int rope_num = (lba->hpa.start >> 13) & 0xf; + if (rope_num >> 3 == ibd->ioc_num) + lba_set_iregs(lba, ibd->ioc->ibase, ibd->ioc->imask); + return 0; } /* setup Mercury or Elroy IBASE/IMASK registers. */ static void setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num) { - /* lba_set_iregs() is in drivers/parisc/lba_pci.c */ - extern void lba_set_iregs(struct parisc_device *, u32, u32); - struct device *dev; - struct klist_iter i; - - klist_iter_init(&sba->dev.klist_children, &i); - while ((dev = next_device(&i))) { - struct parisc_device *lba = to_parisc_device(dev); - int rope_num = (lba->hpa.start >> 13) & 0xf; - if (rope_num >> 3 == ioc_num) - lba_set_iregs(lba, ioc->ibase, ioc->imask); - } - klist_iter_exit(&i); + struct ibase_data_struct ibase_data = { + .ioc = ioc, + .ioc_num = ioc_num, + }; + + device_for_each_child(&sba->dev, &ibase_data, + setup_ibase_imask_callback); } +#ifdef SBA_AGP_SUPPORT +static int +sba_ioc_find_quicksilver(struct device *dev, void *data) +{ + int *agp_found = data; + struct parisc_device *lba = to_parisc_device(dev); + + if (IS_QUICKSILVER(lba)) + *agp_found = 1; + return 0; +} +#endif + static void sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) { @@ -1332,9 +1350,6 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM); #ifdef SBA_AGP_SUPPORT -{ - struct klist_iter i; - struct device *dev = NULL; /* ** If an AGP device is present, only use half of the IOV space @@ -1344,13 +1359,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) ** We program the next pdir index after we stop w/ a key for ** the GART code to handshake on. */ - klist_iter_init(&sba->dev.klist_children, &i); - while ((dev = next_device(&i))) { - struct parisc_device *lba = to_parisc_device(dev); - if (IS_QUICKSILVER(lba)) - agp_found = 1; - } - klist_iter_exit(&i); + device_for_each_child(&sba->dev, &agp_found, sba_ioc_find_quicksilver); if (agp_found && sba_reserve_agpgart) { printk(KERN_INFO "%s: reserving %dMb of IOVA space for agpgart\n", -- cgit v1.2.3 From 24dc029f71c1411c5974a79848d68bb3e34263b9 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 13 Jan 2009 20:51:29 +0100 Subject: parisc: fix section mismatch warnings Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/kernel/firmware.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c index 03f26bd75bd8..f6d241238a78 100644 --- a/arch/parisc/kernel/firmware.c +++ b/arch/parisc/kernel/firmware.c @@ -151,7 +151,7 @@ static void convert_to_wide(unsigned long *addr) } #ifdef CONFIG_64BIT -void __init set_firmware_width_unlocked(void) +void __cpuinit set_firmware_width_unlocked(void) { int ret; @@ -168,7 +168,7 @@ void __init set_firmware_width_unlocked(void) * This function must be called before any pdc_* function that uses the * convert_to_wide function. */ -void __init set_firmware_width(void) +void __cpuinit set_firmware_width(void) { unsigned long flags; spin_lock_irqsave(&pdc_lock, flags); @@ -176,11 +176,11 @@ void __init set_firmware_width(void) spin_unlock_irqrestore(&pdc_lock, flags); } #else -void __init set_firmware_width_unlocked(void) { +void __cpuinit set_firmware_width_unlocked(void) { return; } -void __init set_firmware_width(void) { +void __cpuinit set_firmware_width(void) { return; } #endif /*CONFIG_64BIT*/ @@ -302,7 +302,7 @@ int pdc_chassis_warn(unsigned long *warn) return retval; } -int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info) +int __cpuinit pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info) { int ret; @@ -323,7 +323,7 @@ int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info) * This PDC call returns the presence and status of all the coprocessors * attached to the processor. */ -int __init pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info) +int __cpuinit pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info) { int ret; unsigned long flags; -- cgit v1.2.3 From e448372c79c49ef80df23496339ce0915abef76e Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 13 Jan 2009 20:52:46 +0100 Subject: parisc: fix `struct pt_regs' declared inside parameter list warning Fix those compile warnings: uaccess.h:244: warning: `struct pt_regs' declared inside parameter list uaccess.h:244: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/uaccess.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h index 1c6dbb6f6e56..cd4c0b2a8e70 100644 --- a/arch/parisc/include/asm/uaccess.h +++ b/arch/parisc/include/asm/uaccess.h @@ -241,6 +241,7 @@ unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned lo #define __copy_to_user_inatomic __copy_to_user #define __copy_from_user_inatomic __copy_from_user +struct pt_regs; int fixup_exception(struct pt_regs *regs); #endif /* __PARISC_UACCESS_H */ -- cgit v1.2.3 From ddd1f6c66dd964c106377f2be37b318794f112f4 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 13 Jan 2009 20:54:25 +0100 Subject: parisc: remove unused local out_putf label Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/hpux/fs.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c index bd9a4db3bd4c..5cbe9f9e5d9e 100644 --- a/arch/parisc/hpux/fs.c +++ b/arch/parisc/hpux/fs.c @@ -137,7 +137,6 @@ int hpux_getdents(unsigned int fd, struct hpux_dirent __user *dirent, unsigned i error = count - buf.count; } -out_putf: fput(file); out: return error; -- cgit v1.2.3 From 7f384ce780c6091968fc848b14f17b45cb849e14 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 13 Jan 2009 21:14:51 +0100 Subject: parisc: fix dev_printk() compile warnings for accessing a device struct Fix compile warnings: drivers/scsi/zalon.c: In function `zalon_probe': drivers/scsi/zalon.c:140: warning: passing arg 1 of `dev_driver_string' from incompatible pointer type drivers/scsi/zalon.c:140: warning: passing arg 1 of `dev_name' from incompatible pointer type Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- drivers/scsi/lasi700.c | 2 +- drivers/scsi/zalon.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c index 4a4e6954ec79..f23c4ca9a2ee 100644 --- a/drivers/scsi/lasi700.c +++ b/drivers/scsi/lasi700.c @@ -103,7 +103,7 @@ lasi700_probe(struct parisc_device *dev) hostdata = kzalloc(sizeof(*hostdata), GFP_KERNEL); if (!hostdata) { - dev_printk(KERN_ERR, dev, "Failed to allocate host data\n"); + dev_printk(KERN_ERR, &dev->dev, "Failed to allocate host data\n"); return -ENOMEM; } diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c index a8d61a62522e..97f3158fa7b5 100644 --- a/drivers/scsi/zalon.c +++ b/drivers/scsi/zalon.c @@ -137,7 +137,7 @@ zalon_probe(struct parisc_device *dev) goto fail; if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) { - dev_printk(KERN_ERR, dev, "irq problem with %d, detaching\n ", + dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ", dev->irq); goto fail; } -- cgit v1.2.3 From 2cfeb9a6755d4d7be1026422b6aced48e3bad492 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sun, 18 Jan 2009 18:13:53 +0100 Subject: parisc: add braces around arguments in assembler macros Add braces around the macro arguments, else for example "shl %r1, 5-3, %r2" would not expand to what you would assume. Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/assembly.h | 10 +++++----- arch/parisc/kernel/entry.S | 6 +++--- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h index ffb208840ecc..ab7cc373ee56 100644 --- a/arch/parisc/include/asm/assembly.h +++ b/arch/parisc/include/asm/assembly.h @@ -129,27 +129,27 @@ /* Shift Left - note the r and t can NOT be the same! */ .macro shl r, sa, t - dep,z \r, 31-\sa, 32-\sa, \t + dep,z \r, 31-(\sa), 32-(\sa), \t .endm /* The PA 2.0 shift left */ .macro shlw r, sa, t - depw,z \r, 31-\sa, 32-\sa, \t + depw,z \r, 31-(\sa), 32-(\sa), \t .endm /* And the PA 2.0W shift left */ .macro shld r, sa, t - depd,z \r, 63-\sa, 64-\sa, \t + depd,z \r, 63-(\sa), 64-(\sa), \t .endm /* Shift Right - note the r and t can NOT be the same! */ .macro shr r, sa, t - extru \r, 31-\sa, 32-\sa, \t + extru \r, 31-(\sa), 32-(\sa), \t .endm /* pa20w version of shift right */ .macro shrd r, sa, t - extrd,u \r, 63-\sa, 64-\sa, \t + extrd,u \r, 63-(\sa), 64-(\sa), \t .endm /* load 32-bit 'value' into 'reg' compensating for the ldil diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index d1fa4edd2d80..0db9fdcb7709 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -368,7 +368,7 @@ * abstractions for the macros */ .macro EXTR reg1,start,length,reg2 #ifdef CONFIG_64BIT - extrd,u \reg1,32+\start,\length,\reg2 + extrd,u \reg1,32+(\start),\length,\reg2 #else extrw,u \reg1,\start,\length,\reg2 #endif @@ -376,7 +376,7 @@ .macro DEP reg1,start,length,reg2 #ifdef CONFIG_64BIT - depd \reg1,32+\start,\length,\reg2 + depd \reg1,32+(\start),\length,\reg2 #else depw \reg1,\start,\length,\reg2 #endif @@ -384,7 +384,7 @@ .macro DEPI val,start,length,reg #ifdef CONFIG_64BIT - depdi \val,32+\start,\length,\reg + depdi \val,32+(\start),\length,\reg #else depwi \val,\start,\length,\reg #endif -- cgit v1.2.3 From c1da90fd099531e9449019dc53a5a02a5eaef2b4 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 26 Jan 2009 22:24:38 +0100 Subject: parisc: fix 64bit build Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/assembly.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h index ab7cc373ee56..89fb40005e3f 100644 --- a/arch/parisc/include/asm/assembly.h +++ b/arch/parisc/include/asm/assembly.h @@ -79,6 +79,7 @@ #include #include +#include #include -- cgit v1.2.3 From 9785d646c10b0707412516ffe56b71b9eb18861f Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Wed, 28 Jan 2009 22:30:55 -0700 Subject: parisc: fix wrong assumption about bus->self Kenji Kaneshige posted a patch series to linux-pci to fix a wrong assumption about pci_bus->self==NULL for all PCI host bus controllers. While PARISC platforms to not behave this way, I prefer to have the code consistent across architectures. The following patch replaces pci_bus->self with pci_bus->parent when used as a test to check for "root bus controller". Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- drivers/parisc/dino.c | 2 +- drivers/parisc/iosapic.c | 9 ++++----- drivers/parisc/lba_pci.c | 4 ++-- 3 files changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index d539d9df88e7..f79266cd00e5 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -587,7 +587,7 @@ dino_fixup_bus(struct pci_bus *bus) bus->resource[i+1] = &res[i]; } - } else if(bus->self) { + } else if (bus->parent) { int i; pci_read_bridge_bases(bus); diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 0797659ee016..1cdfdea5d7ef 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -487,7 +487,7 @@ iosapic_xlate_pin(struct iosapic_info *isi, struct pci_dev *pcidev) } /* Check if pcidev behind a PPB */ - if (NULL != pcidev->bus->self) { + if (pcidev->bus->parent) { /* Convert pcidev INTR_PIN into something we ** can lookup in the IRT. */ @@ -523,10 +523,9 @@ iosapic_xlate_pin(struct iosapic_info *isi, struct pci_dev *pcidev) #endif /* PCI_BRIDGE_FUNCS */ /* - ** Locate the host slot the PPB nearest the Host bus - ** adapter. - */ - while (NULL != p->parent->self) + * Locate the host slot of the PPB. + */ + while (p->parent->parent) p = p->parent; intr_slot = PCI_SLOT(p->self->devfn); diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index d8233de8c75d..59fbbf128365 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -644,7 +644,7 @@ lba_fixup_bus(struct pci_bus *bus) ** Properly Setup MMIO resources for this bus. ** pci_alloc_primary_bus() mangles this. */ - if (bus->self) { + if (bus->parent) { int i; /* PCI-PCI Bridge */ pci_read_bridge_bases(bus); @@ -802,7 +802,7 @@ lba_fixup_bus(struct pci_bus *bus) ** Can't fixup here anyway....garr... */ if (fbb_enable) { - if (bus->self) { + if (bus->parent) { u8 control; /* enable on PPB */ (void) pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &control); -- cgit v1.2.3 From 763461194817bc39905c7c41d08e8d9548a3916d Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Mon, 1 Dec 2008 00:21:35 -0700 Subject: parisc: update MAINTAINERS Signed-off-By: Grant Grundler Reviewed-by: Matthew Wilcox Acked-by: Helge Deller Signed-off-by: Kyle McMartin --- MAINTAINERS | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 61aeb5aae244..4a1cfca49685 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3350,10 +3350,8 @@ S: Maintained PARISC ARCHITECTURE P: Kyle McMartin M: kyle@mcmartin.ca -P: Matthew Wilcox -M: matthew@wil.cx -P: Grant Grundler -M: grundler@parisc-linux.org +P: Helge Deller +M: deller@gmx.de L: linux-parisc@vger.kernel.org W: http://www.parisc-linux.org/ T: git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git -- cgit v1.2.3 From 5a8247ca4c6441cafbb852cb1048d1056734a90c Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Tue, 13 Jan 2009 03:05:25 +0000 Subject: parisc: update parisc for new irq_desc Impact: cleanup, update to new cpumask API Irq_desc.affinity and irq_desc.pending_mask are now cpumask_var_t's so access to them should be using the new cpumask API. Signed-off-by: Mike Travis Signed-off-by: Kyle McMartin --- arch/parisc/kernel/irq.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index ac2c822928c7..49482806863f 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, cpumask_t *dest) if (CHECK_IRQ_PER_CPU(irq)) { /* Bad linux design decision. The mask has already * been set; we must reset it */ - irq_desc[irq].affinity = CPU_MASK_ALL; + cpumask_setall(irq_desc[irq].affinity); return -EINVAL; } @@ -136,7 +136,7 @@ static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) if (cpu_check_affinity(irq, dest)) return; - irq_desc[irq].affinity = *dest; + cpumask_copy(irq_desc[irq].affinity, dest); } #endif @@ -295,7 +295,7 @@ int txn_alloc_irq(unsigned int bits_wide) unsigned long txn_affinity_addr(unsigned int irq, int cpu) { #ifdef CONFIG_SMP - irq_desc[irq].affinity = cpumask_of_cpu(cpu); + cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); #endif return per_cpu(cpu_data, cpu).txn_addr; @@ -352,7 +352,7 @@ void do_cpu_irq_mask(struct pt_regs *regs) irq = eirr_to_irq(eirr_val); #ifdef CONFIG_SMP - dest = irq_desc[irq].affinity; + cpumask_copy(&dest, irq_desc[irq].affinity); if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) && !cpu_isset(smp_processor_id(), dest)) { int cpu = first_cpu(dest); -- cgit v1.2.3 From 7c4be70e6d07582a111a1b66942c8a1d45528dfb Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 16 Feb 2009 02:53:03 -0500 Subject: parisc: fix use of new cpumask api in irq.c cpumask api needs to take a pointer to irq_desc[cpu].affinity Signed-off-by: Kyle McMartin --- arch/parisc/kernel/irq.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 49482806863f..a572112f5aba 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, cpumask_t *dest) if (CHECK_IRQ_PER_CPU(irq)) { /* Bad linux design decision. The mask has already * been set; we must reset it */ - cpumask_setall(irq_desc[irq].affinity); + cpumask_setall(&irq_desc[irq].affinity); return -EINVAL; } @@ -136,7 +136,7 @@ static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) if (cpu_check_affinity(irq, dest)) return; - cpumask_copy(irq_desc[irq].affinity, dest); + cpumask_copy(&irq_desc[irq].affinity, dest); } #endif @@ -295,7 +295,7 @@ int txn_alloc_irq(unsigned int bits_wide) unsigned long txn_affinity_addr(unsigned int irq, int cpu) { #ifdef CONFIG_SMP - cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); + cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu)); #endif return per_cpu(cpu_data, cpu).txn_addr; @@ -352,7 +352,7 @@ void do_cpu_irq_mask(struct pt_regs *regs) irq = eirr_to_irq(eirr_val); #ifdef CONFIG_SMP - cpumask_copy(&dest, irq_desc[irq].affinity); + cpumask_copy(&dest, &irq_desc[irq].affinity); if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) && !cpu_isset(smp_processor_id(), dest)) { int cpu = first_cpu(dest); -- cgit v1.2.3 From 9dfe914da83ebc88f85d94b4d30d0e45882766d1 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 16 Feb 2009 03:05:02 -0500 Subject: parisc: convert (read|write)bwlq to inlines Kills the 'value computed but not used' due to leX_to_cpu. Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/io.h | 42 +++++++++++++++++++++++++++++++++--------- 1 file changed, 33 insertions(+), 9 deletions(-) diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h index d3031d1f9d03..1fa905ea53de 100644 --- a/arch/parisc/include/asm/io.h +++ b/arch/parisc/include/asm/io.h @@ -174,15 +174,39 @@ static inline void __raw_writeq(unsigned long long b, volatile void __iomem *add *(volatile unsigned long long __force *) addr = b; } -/* readb can never be const, so use __fswab instead of le*_to_cpu */ -#define readb(addr) __raw_readb(addr) -#define readw(addr) le16_to_cpu(__raw_readw(addr)) -#define readl(addr) le32_to_cpu(__raw_readl(addr)) -#define readq(addr) le64_to_cpu(__raw_readq(addr)) -#define writeb(b, addr) __raw_writeb(b, addr) -#define writew(b, addr) __raw_writew(cpu_to_le16(b), addr) -#define writel(b, addr) __raw_writel(cpu_to_le32(b), addr) -#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr) +static inline unsigned char readb(const volatile void __iomem *addr) +{ + return __raw_readb(addr); +} +static inline unsigned short readw(const volatile void __iomem *addr) +{ + return le16_to_cpu(__raw_readw(addr)); +} +static inline unsigned int readl(const volatile void __iomem *addr) +{ + return le32_to_cpu(__raw_readl(addr)); +} +static inline unsigned long long readq(const volatile void __iomem *addr) +{ + return le64_to_cpu(__raw_readq(addr)); +} + +static inline void writeb(unsigned char b, volatile void __iomem *addr) +{ + __raw_writeb(b, addr); +} +static inline void writew(unsigned short w, volatile void __iomem *addr) +{ + __raw_writew(cpu_to_le16(w), addr); +} +static inline void writel(unsigned int l, volatile void __iomem *addr) +{ + __raw_writel(cpu_to_le32(l), addr); +} +static inline void writeq(unsigned long long q, volatile void __iomem *addr) +{ + __raw_writeq(cpu_to_le64(q), addr); +} #define readb_relaxed(addr) readb(addr) #define readw_relaxed(addr) readw(addr) -- cgit v1.2.3 From 8b6649c575e0d8312f62fe643ae43558892da2e1 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 16 Feb 2009 03:20:54 -0500 Subject: parisc: convert cpu_check_affinity to new cpumask api cpumask arg to the affinity function is now const, sort that out through the irq_desc implementations. Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/irq.h | 2 +- arch/parisc/kernel/irq.c | 12 +++++++----- drivers/parisc/iosapic.c | 7 +++++-- 3 files changed, 13 insertions(+), 8 deletions(-) diff --git a/arch/parisc/include/asm/irq.h b/arch/parisc/include/asm/irq.h index 399c81981ed5..dfa26b67f919 100644 --- a/arch/parisc/include/asm/irq.h +++ b/arch/parisc/include/asm/irq.h @@ -49,7 +49,7 @@ extern unsigned long txn_alloc_addr(unsigned int); extern unsigned long txn_affinity_addr(unsigned int irq, int cpu); extern int cpu_claim_irq(unsigned int irq, struct irq_chip *, void *); -extern int cpu_check_affinity(unsigned int irq, cpumask_t *dest); +extern int cpu_check_affinity(unsigned int irq, const struct cpumask *dest); /* soft power switch support (power.c) */ extern struct tasklet_struct power_tasklet; diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index a572112f5aba..29e70e16ede8 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -112,7 +112,7 @@ void cpu_end_irq(unsigned int irq) } #ifdef CONFIG_SMP -int cpu_check_affinity(unsigned int irq, cpumask_t *dest) +int cpu_check_affinity(unsigned int irq, const struct cpumask *dest) { int cpu_dest; @@ -126,17 +126,19 @@ int cpu_check_affinity(unsigned int irq, cpumask_t *dest) /* whatever mask they set, we just allow one CPU */ cpu_dest = first_cpu(*dest); - *dest = cpumask_of_cpu(cpu_dest); - return 0; + return cpu_dest; } static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) { - if (cpu_check_affinity(irq, dest)) + int cpu_dest; + + cpu_dest = cpu_check_affinity(irq, dest); + if (cpu_dest < 0) return; - cpumask_copy(&irq_desc[irq].affinity, dest); + cpumask_copy(&irq_desc[irq].affinity, &cpumask_of_cpu(cpu_dest)); } #endif diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 1cdfdea5d7ef..501aaf1f253f 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -708,11 +708,14 @@ static void iosapic_set_affinity_irq(unsigned int irq, struct vector_info *vi = iosapic_get_vector(irq); u32 d0, d1, dummy_d0; unsigned long flags; + int dest_cpu; - if (cpu_check_affinity(irq, dest)) + dest_cpu = cpu_check_affinity(irq, dest); + if (dest_cpu < 0) return; - vi->txn_addr = txn_affinity_addr(irq, cpumask_first(dest)); + irq_desc[irq].affinity = cpumask_of_cpu(dest_cpu); + vi->txn_addr = txn_affinity_addr(irq, dest_cpu); spin_lock_irqsave(&iosapic_lock, flags); /* d1 contains the destination CPU, so only want to set that -- cgit v1.2.3 From d4995244bd4c02eb7bea3c63aee81a2f2b64910e Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Mon, 26 Jan 2009 03:53:16 +0000 Subject: parisc: dino: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman Signed-off-by: Kay Sievers Signed-off-by: Kyle McMartin --- drivers/parisc/dino.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index f79266cd00e5..bb5a1c9597cb 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -479,7 +479,7 @@ dino_card_setup(struct pci_bus *bus, void __iomem *base_addr) res = &dino_dev->hba.lmmio_space; res->flags = IORESOURCE_MEM; size = scnprintf(name, sizeof(name), "Dino LMMIO (%s)", - bus->bridge->bus_id); + dev_name(bus->bridge)); res->name = kmalloc(size+1, GFP_KERNEL); if(res->name) strcpy((char *)res->name, name); @@ -493,7 +493,7 @@ dino_card_setup(struct pci_bus *bus, void __iomem *base_addr) struct list_head *ln, *tmp_ln; printk(KERN_ERR "Dino: cannot attach bus %s\n", - bus->bridge->bus_id); + dev_name(bus->bridge)); /* kill the bus, we can't do anything with it */ list_for_each_safe(ln, tmp_ln, &bus->devices) { struct pci_dev *dev = pci_dev_b(ln); @@ -611,12 +611,12 @@ dino_fixup_bus(struct pci_bus *bus) } DBG("DEBUG %s assigning %d [0x%lx,0x%lx]\n", - bus->self->dev.bus_id, i, + dev_name(&bus->self->dev), i, bus->self->resource[i].start, bus->self->resource[i].end); pci_assign_resource(bus->self, i); DBG("DEBUG %s after assign %d [0x%lx,0x%lx]\n", - bus->self->dev.bus_id, i, + dev_name(&bus->self->dev), i, bus->self->resource[i].start, bus->self->resource[i].end); } @@ -1026,7 +1026,8 @@ static int __init dino_probe(struct parisc_device *dev) dino_current_bus = bus->subordinate + 1; pci_bus_assign_resources(bus); } else { - printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n", dev->dev.bus_id, dino_current_bus); + printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n", + dev_name(&dev->dev), dino_current_bus); /* increment the bus number in case of duplicates */ dino_current_bus++; } -- cgit v1.2.3 From 0cb385e3ff54ee095d9873209f4da764dfb17fec Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Tue, 17 Feb 2009 12:42:52 -0500 Subject: parisc: define x->x mmio accessors Bloody inconsiderate driver writers... Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/io.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h index 1fa905ea53de..1f6d2ae7aba5 100644 --- a/arch/parisc/include/asm/io.h +++ b/arch/parisc/include/asm/io.h @@ -208,6 +208,15 @@ static inline void writeq(unsigned long long q, volatile void __iomem *addr) __raw_writeq(cpu_to_le64(q), addr); } +#define readb readb +#define readw readw +#define readl readl +#define readq readq +#define writeb writeb +#define writew writew +#define writel writel +#define writeq writeq + #define readb_relaxed(addr) readb(addr) #define readw_relaxed(addr) readw(addr) #define readl_relaxed(addr) readl(addr) -- cgit v1.2.3 From e8f208e8f727515bc605f241a5f854b41f77d0ed Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 13 Mar 2009 01:33:34 -0400 Subject: parisc: update defconfigs Signed-off-by: Kyle McMartin --- arch/parisc/configs/712_defconfig | 429 ++++++++++++++++--------- arch/parisc/configs/a500_defconfig | 490 +++++++++++++++++++--------- arch/parisc/configs/b180_defconfig | 433 +++++++++++++++++-------- arch/parisc/configs/c3000_defconfig | 575 ++++++++++++++++++++++----------- arch/parisc/configs/default_defconfig | 585 ++++++++++++++++++++++------------ 5 files changed, 1681 insertions(+), 831 deletions(-) diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig index 9fc96e727165..bf34a28895fa 100644 --- a/arch/parisc/configs/712_defconfig +++ b/arch/parisc/configs/712_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 21:00:07 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:55 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -33,17 +33,35 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -55,29 +73,38 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -91,6 +118,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set # # Processor type and features @@ -114,17 +142,19 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_HPUX is not set # @@ -138,10 +168,6 @@ CONFIG_GSC_LASI=y # CONFIG_EISA is not set # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -156,16 +182,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -173,6 +198,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -203,25 +229,25 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -230,6 +256,7 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -240,28 +267,26 @@ CONFIG_LLC2=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -276,6 +301,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -298,11 +325,19 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# # CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -342,14 +377,17 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set CONFIG_SCSI_LASI700=y CONFIG_53C700_LE_ON_BE=y # CONFIG_SCSI_ZALON is not set CONFIG_SCSI_DEBUG=m +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -362,7 +400,6 @@ CONFIG_MD_RAID1=m # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -377,6 +414,9 @@ CONFIG_LASI_82596=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y @@ -387,6 +427,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -401,7 +446,6 @@ CONFIG_PPPOE=m # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -423,7 +467,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -446,8 +489,8 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set @@ -474,9 +517,11 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -501,72 +546,76 @@ CONFIG_PDC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=64 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m -# CONFIG_TIPAR is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -579,6 +628,14 @@ CONFIG_FB_TILEBLITTING=y CONFIG_FB_STI=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -606,15 +663,8 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -630,10 +680,7 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set @@ -641,63 +688,82 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set - -# -# GSC devices -# +CONFIG_SND_GSC=y CONFIG_SND_HARMONY=y - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set -# CONFIG_RTC_CLASS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices -# -# CONFIG_AUXDISPLAY is not set +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -707,7 +773,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set @@ -717,19 +783,18 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -759,16 +824,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -778,35 +840,34 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m @@ -815,6 +876,7 @@ CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set @@ -827,10 +889,6 @@ CONFIG_CIFS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -871,33 +929,28 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -909,10 +962,32 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_RODATA=y # @@ -921,57 +996,113 @@ CONFIG_DEBUG_RODATA=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig index ddacc72e38fb..f12e4b8349d9 100644 --- a/arch/parisc/configs/a500_defconfig +++ b/arch/parisc/configs/a500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 21:12:44 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:56 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -34,18 +34,30 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_CPUSETS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -57,28 +69,40 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # @@ -93,6 +117,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set # # Processor type and features @@ -118,12 +143,12 @@ CONFIG_NODES_SHIFT=3 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set CONFIG_DISCONTIGMEM_MANUAL=y @@ -131,11 +156,12 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_COMPAT=y CONFIG_NR_CPUS=8 @@ -145,14 +171,13 @@ CONFIG_NR_CPUS=8 # CONFIG_GSC is not set CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_IOMMU_HELPER=y CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m @@ -187,16 +212,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -204,6 +228,8 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -234,7 +260,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -250,66 +275,72 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m # CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_RAW=m @@ -318,33 +349,30 @@ CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m -# CONFIG_IP6_NF_MATCH_OWNER is not set CONFIG_IP6_NF_MATCH_IPV6HEADER=m -# CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_MH is not set -# CONFIG_IP6_NF_MATCH_EUI64 is not set -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set # CONFIG_IP_DCCP_CCID3 is not set @@ -356,6 +384,7 @@ CONFIG_IP_DCCP_CCID2=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -366,28 +395,26 @@ CONFIG_LLC2=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -402,6 +429,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -421,14 +450,23 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -468,8 +506,10 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -478,16 +518,21 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 @@ -503,9 +548,11 @@ CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_DEBUG=m # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -514,10 +561,6 @@ CONFIG_MD_RAID1=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# CONFIG_FUSION=y CONFIG_FUSION_SPI=m CONFIG_FUSION_FC=m @@ -529,20 +572,40 @@ CONFIG_FUSION_CTL=m # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set @@ -567,33 +630,38 @@ CONFIG_HP100=m # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m -# CONFIG_PCNET32_NAPI is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=m -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -601,23 +669,31 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -625,6 +701,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m @@ -650,7 +731,6 @@ CONFIG_PPP_BSDCOMP=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -669,7 +749,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -693,10 +772,13 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -721,17 +803,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -CONFIG_AGP=y -CONFIG_AGP_PARISC=y -# CONFIG_DRM is not set # # PCMCIA character devices @@ -739,51 +816,66 @@ CONFIG_AGP_PARISC=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +CONFIG_AGP=y +CONFIG_AGP_PARISC=y +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support @@ -792,50 +884,83 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 # CONFIG_STI_CONSOLE is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices -# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -845,7 +970,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set @@ -855,19 +980,19 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -897,16 +1022,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -916,34 +1038,33 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m @@ -952,6 +1073,7 @@ CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set @@ -964,10 +1086,6 @@ CONFIG_CIFS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1008,33 +1126,28 @@ CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1046,10 +1159,33 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_BUILD_DOCSRC is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_RODATA is not set # @@ -1058,56 +1194,112 @@ CONFIG_FORCED_INLINING=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=m -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig index 1bf22c9a4614..98bb05ee6e8d 100644 --- a/arch/parisc/configs/b180_defconfig +++ b/arch/parisc/configs/b180_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 21:16:46 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:57 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -33,13 +33,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set # CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -51,27 +67,34 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -85,6 +108,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set # # Processor type and features @@ -108,13 +132,15 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_HPUX is not set # @@ -130,14 +156,14 @@ CONFIG_EISA_NAMES=y CONFIG_ISA=y CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set CONFIG_GSC_DINO=y # CONFIG_PCI_LBA is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_IOMMU_HELPER=y # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # # PA-RISC specific drivers @@ -151,16 +177,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -205,36 +230,37 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set +# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # @@ -247,7 +273,9 @@ CONFIG_IPV6_SIT=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -275,10 +303,18 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=y +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -317,8 +353,10 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -330,12 +368,15 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -346,6 +387,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_LASI700=y CONFIG_53C700_LE_ON_BE=y @@ -360,7 +402,6 @@ CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=40 # CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set @@ -373,9 +414,11 @@ CONFIG_SCSI_NCR53C8XX_SYNC=40 # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -383,26 +426,18 @@ CONFIG_MD_RAID1=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # # -# An alternative FireWire stack is available with EXPERIMENTAL=y +# A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -434,36 +469,49 @@ CONFIG_TULIP=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_CS89x0 is not set # CONFIG_NET_POCKET is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -471,6 +519,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PLIP is not set @@ -503,7 +556,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -526,11 +578,12 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set @@ -564,9 +617,11 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -598,75 +653,79 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -691,6 +750,7 @@ CONFIG_FB_STI=y # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -698,7 +758,16 @@ CONFIG_FB_STI=y # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -718,15 +787,8 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_PARISC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -742,10 +804,7 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set @@ -753,10 +812,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -765,9 +821,11 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_DARLA20 is not set @@ -792,6 +850,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -809,30 +868,23 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# GSC devices -# +CONFIG_SND_GSC=y CONFIG_SND_HARMONY=y - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -840,36 +892,63 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices -# -# CONFIG_AUXDISPLAY is not set +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -879,19 +958,18 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -917,35 +995,32 @@ CONFIG_JOLIET=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y @@ -962,10 +1037,6 @@ CONFIG_SMB_FS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1011,7 +1082,9 @@ CONFIG_NLS_UTF8=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1019,9 +1092,12 @@ CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1033,10 +1109,29 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_BUILD_DOCSRC is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_RODATA is not set # @@ -1044,52 +1139,108 @@ CONFIG_FORCED_INLINING=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_PCBC is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index c6def3c1d209..0aa8014f758c 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 21:24:00 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:58 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -33,16 +33,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -54,29 +67,39 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -90,6 +113,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set # # Processor type and features @@ -115,17 +139,19 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_HPUX is not set # @@ -134,14 +160,13 @@ CONFIG_VIRT_TO_BUS=y # CONFIG_GSC is not set CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_IOMMU_HELPER=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -158,16 +183,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -175,6 +199,8 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -204,7 +230,6 @@ CONFIG_INET_XFRM_MODE_BEET=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -220,29 +245,34 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y CONFIG_NETFILTER_DEBUG=y +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set @@ -251,6 +281,7 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -260,28 +291,26 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -296,6 +325,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -316,59 +347,62 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_ONLYDISK=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=y @@ -380,10 +414,7 @@ CONFIG_BLK_DEV_SIIMAGE=m # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -422,8 +453,10 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -433,16 +466,20 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 @@ -458,9 +495,11 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_NSP32 is not set CONFIG_SCSI_DEBUG=m # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -475,13 +514,8 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -# CONFIG_DM_MULTIPATH_EMC is not set -# CONFIG_DM_MULTIPATH_RDAC is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=m # CONFIG_FUSION_FC is not set @@ -493,20 +527,40 @@ CONFIG_FUSION_CTL=m # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set @@ -528,33 +582,38 @@ CONFIG_TULIP_MMIO=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -562,23 +621,31 @@ CONFIG_E1000=m # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -586,6 +653,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -594,7 +666,6 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -612,7 +683,6 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -634,7 +704,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -652,6 +721,7 @@ CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -672,10 +742,13 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -699,72 +772,77 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -790,6 +868,7 @@ CONFIG_FB_STI=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -798,7 +877,16 @@ CONFIG_FB_STI=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -818,15 +906,8 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -842,20 +923,16 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y CONFIG_SND_AD1889=y # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -864,10 +941,12 @@ CONFIG_SND_AD1889=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_DARLA20 is not set @@ -892,6 +971,7 @@ CONFIG_SND_AD1889=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -909,47 +989,59 @@ CONFIG_SND_AD1889=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -958,12 +1050,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -971,32 +1071,37 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1004,15 +1109,10 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m -# CONFIG_USB_MON is not set # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1021,7 +1121,7 @@ CONFIG_USB_MICROTEK=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=m # CONFIG_USB_LCD is not set @@ -1037,37 +1137,59 @@ CONFIG_USB_LEGOTOWER=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# USB DSL modem support -# - -# -# USB Gadget Support +# OTG and related infrastructure # -# CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1077,25 +1199,24 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1124,16 +1245,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1142,32 +1260,31 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1181,10 +1298,6 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1225,33 +1338,28 @@ CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1263,10 +1371,33 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_BUILD_DOCSRC is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_RODATA=y # @@ -1274,54 +1405,110 @@ CONFIG_DEBUG_RODATA=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=m -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig index 448a757b06c6..283a96c1b5ea 100644 --- a/arch/parisc/configs/default_defconfig +++ b/arch/parisc/configs/default_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 20:54:57 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:59 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -33,17 +33,35 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -55,29 +73,39 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -91,6 +119,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set # # Processor type and features @@ -114,17 +143,19 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_HPUX is not set # @@ -140,15 +171,14 @@ CONFIG_EISA_NAMES=y # CONFIG_ISA is not set CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set CONFIG_GSC_DINO=y CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_IOMMU_HELPER=y CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -183,16 +213,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -200,6 +229,8 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -245,8 +276,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -254,6 +287,7 @@ CONFIG_IPV6_SIT=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -264,28 +298,26 @@ CONFIG_LLC2=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -300,6 +332,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -330,63 +364,68 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECS=y # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_ONLYDISK=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=y @@ -398,10 +437,7 @@ CONFIG_BLK_DEV_NS87415=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -440,8 +476,10 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -452,11 +490,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -464,6 +505,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_MVSAS is not set CONFIG_SCSI_LASI700=y CONFIG_53C700_LE_ON_BE=y # CONFIG_SCSI_STEX is not set @@ -487,9 +529,11 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -505,32 +549,47 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set # -# Fusion MPT device support +# IEEE 1394 (FireWire) support # -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # -# IEEE 1394 (FireWire) support +# Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_LASI_82596=y @@ -550,13 +609,15 @@ CONFIG_TULIP=y # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_PCMCIA_XIRCOM is not set -# CONFIG_PCMCIA_XIRTULIP is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -564,7 +625,7 @@ CONFIG_NET_PCI=y # CONFIG_AC3200 is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set +# CONFIG_CS89x0 is not set # CONFIG_E100 is not set # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set @@ -574,19 +635,24 @@ CONFIG_NET_PCI=y # CONFIG_ES3210 is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=y # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -594,23 +660,31 @@ CONFIG_ACENIC=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -618,6 +692,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -626,7 +705,6 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set @@ -654,7 +732,6 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -676,7 +753,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -699,11 +775,12 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set CONFIG_MOUSE_HIL=y # CONFIG_INPUT_JOYSTICK is not set @@ -729,10 +806,13 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -759,21 +839,16 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=64 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m -# CONFIG_TIPAR is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set # # PCMCIA character devices @@ -781,60 +856,70 @@ CONFIG_GEN_RTC_X=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -860,6 +945,7 @@ CONFIG_FB_STI=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -868,7 +954,16 @@ CONFIG_FB_STI=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -896,15 +991,8 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -920,11 +1008,9 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set @@ -932,10 +1018,8 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y CONFIG_SND_AD1889=y # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -944,10 +1028,12 @@ CONFIG_SND_AD1889=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_DARLA20 is not set @@ -972,6 +1058,7 @@ CONFIG_SND_AD1889=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -989,58 +1076,67 @@ CONFIG_SND_AD1889=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# +CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set - -# -# GSC devices -# +CONFIG_SND_GSC=y CONFIG_SND_HARMONY=y - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1049,12 +1145,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1062,19 +1164,23 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1084,16 +1190,11 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers # # CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1102,7 +1203,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1118,38 +1219,60 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# USB DSL modem support -# - -# -# USB Gadget Support +# OTG and related infrastructure # -# CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # -# CONFIG_AUXDISPLAY is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1159,21 +1282,20 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1202,16 +1324,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -1221,33 +1340,32 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m @@ -1256,6 +1374,7 @@ CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set @@ -1268,10 +1387,6 @@ CONFIG_CIFS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1312,33 +1427,28 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1350,10 +1460,33 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_BUILD_DOCSRC is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_RODATA is not set # @@ -1362,56 +1495,112 @@ CONFIG_FORCED_INLINING=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -- cgit v1.2.3 From d284e4f71dd42826fb60df33846ba310310c6c51 Mon Sep 17 00:00:00 2001 From: Sigmund Augdal Date: Mon, 26 Jan 2009 19:08:48 -0300 Subject: V4L/DVB (10974): Use Diseqc 3/3 mode to send data Signed-off-by: Sigmund Augdal Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/stb0899_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c index 10613acf18f5..a04c782fff8d 100644 --- a/drivers/media/dvb/frontends/stb0899_drv.c +++ b/drivers/media/dvb/frontends/stb0899_drv.c @@ -794,7 +794,7 @@ static int stb0899_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t reg = stb0899_read_reg(state, STB0899_DISCNTRL1); old_state = reg; /* set to burst mode */ - STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x02); + STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x03); STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0x01); stb0899_write_reg(state, STB0899_DISCNTRL1, reg); switch (burst) { -- cgit v1.2.3 From b5d067b8e331ce78f4a81eb220965ffa36069d3f Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Tue, 27 Jan 2009 11:03:16 -0300 Subject: V4L/DVB (10975): Bug: Use signed types, Offsets and range can be negative Code simplification: use in kernel macros Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/stb0899_algo.c | 14 +++++++------- drivers/media/dvb/frontends/stb0899_priv.h | 12 ++++-------- 2 files changed, 11 insertions(+), 15 deletions(-) diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c index a67d1775a43c..2da55ec20392 100644 --- a/drivers/media/dvb/frontends/stb0899_algo.c +++ b/drivers/media/dvb/frontends/stb0899_algo.c @@ -156,7 +156,7 @@ static void stb0899_first_subrange(struct stb0899_state *state) } if (range > 0) - internal->sub_range = MIN(internal->srch_range, range); + internal->sub_range = min(internal->srch_range, range); else internal->sub_range = 0; @@ -185,7 +185,7 @@ static enum stb0899_status stb0899_check_tmg(struct stb0899_state *state) timing = stb0899_read_reg(state, STB0899_RTF); if (lock >= 42) { - if ((lock > 48) && (ABS(timing) >= 110)) { + if ((lock > 48) && (abs(timing) >= 110)) { internal->status = ANALOGCARRIER; dprintk(state->verbose, FE_DEBUG, 1, "-->ANALOG Carrier !"); } else { @@ -222,7 +222,7 @@ static enum stb0899_status stb0899_search_tmg(struct stb0899_state *state) index++; derot_freq += index * internal->direction * derot_step; /* next derot zig zag position */ - if (ABS(derot_freq) > derot_limit) + if (abs(derot_freq) > derot_limit) next_loop--; if (next_loop) { @@ -298,7 +298,7 @@ static enum stb0899_status stb0899_search_carrier(struct stb0899_state *state) last_derot_freq = derot_freq; derot_freq += index * internal->direction * internal->derot_step; /* next zig zag derotator position */ - if(ABS(derot_freq) > derot_limit) + if(abs(derot_freq) > derot_limit) next_loop--; if (next_loop) { @@ -400,7 +400,7 @@ static enum stb0899_status stb0899_search_data(struct stb0899_state *state) if ((internal->status != CARRIEROK) || (stb0899_check_data(state) != DATAOK)) { derot_freq += index * internal->direction * derot_step; /* next zig zag derotator position */ - if (ABS(derot_freq) > derot_limit) + if (abs(derot_freq) > derot_limit) next_loop--; if (next_loop) { @@ -467,7 +467,7 @@ static void next_sub_range(struct stb0899_state *state) if (internal->sub_dir > 0) { old_sub_range = internal->sub_range; - internal->sub_range = MIN((internal->srch_range / 2) - + internal->sub_range = min((internal->srch_range / 2) - (internal->tuner_offst + internal->sub_range / 2), internal->sub_range); @@ -771,7 +771,7 @@ static long Log2Int(int number) int i; i = 0; - while ((1 << i) <= ABS(number)) + while ((1 << i) <= abs(number)) i++; if (number == 0) diff --git a/drivers/media/dvb/frontends/stb0899_priv.h b/drivers/media/dvb/frontends/stb0899_priv.h index 24619e3689db..82395b912815 100644 --- a/drivers/media/dvb/frontends/stb0899_priv.h +++ b/drivers/media/dvb/frontends/stb0899_priv.h @@ -59,10 +59,6 @@ #define MAKEWORD32(a, b, c, d) (((a) << 24) | ((b) << 16) | ((c) << 8) | (d)) #define MAKEWORD16(a, b) (((a) << 8) | (b)) -#define MIN(x, y) ((x) <= (y) ? (x) : (y)) -#define MAX(x, y) ((x) >= (y) ? (x) : (y)) -#define ABS(x) ((x) >= 0 ? (x) : -(x)) - #define LSB(x) ((x & 0xff)) #define MSB(y) ((y >> 8) & 0xff) @@ -168,10 +164,10 @@ struct stb0899_internal { u32 freq; /* Demod internal Frequency */ u32 srate; /* Demod internal Symbol rate */ enum stb0899_fec fecrate; /* Demod internal FEC rate */ - u32 srch_range; /* Demod internal Search Range */ - u32 sub_range; /* Demod current sub range (Hz) */ - u32 tuner_step; /* Tuner step (Hz) */ - u32 tuner_offst; /* Relative offset to carrier (Hz) */ + s32 srch_range; /* Demod internal Search Range */ + s32 sub_range; /* Demod current sub range (Hz) */ + s32 tuner_step; /* Tuner step (Hz) */ + s32 tuner_offst; /* Relative offset to carrier (Hz) */ u32 tuner_bw; /* Current bandwidth of the tuner (Hz) */ s32 mclk; /* Masterclock Divider factor (binary) */ -- cgit v1.2.3 From 1d06059c13fc64b67027334507f734ec0f2f4b6c Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Sun, 9 Nov 2008 11:35:13 -0300 Subject: V4L/DVB (10976): Bug fix: For legacy applications stv0899 performs search only first time after insmod. For legacy applications stv0899 performs search only first time after insmod due to not set DVBFE_ALGO_SEARCH_AGAIN bit Signed-off-by: Igor M. Liplianin Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_frontend.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 843407785083..8dcb3fbf7acd 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1290,9 +1290,6 @@ static int dtv_property_process_set(struct dvb_frontend *fe, dprintk("%s() Finalised property cache\n", __func__); dtv_property_cache_submit(fe); - /* Request the search algorithm to search */ - fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN; - r |= dvb_frontend_ioctl_legacy(inode, file, FE_SET_FRONTEND, &fepriv->parameters); break; @@ -1717,6 +1714,10 @@ static int dvb_frontend_ioctl_legacy(struct inode *inode, struct file *file, fepriv->min_delay = (dvb_override_tune_delay * HZ) / 1000; fepriv->state = FESTATE_RETUNE; + + /* Request the search algorithm to search */ + fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN; + dvb_frontend_wakeup(fe); dvb_frontend_add_event(fe, 0); fepriv->status = 0; -- cgit v1.2.3 From 26f26fa8e3a0822aa43ee0a80bd0196fa2554c42 Mon Sep 17 00:00:00 2001 From: Hans Werner Date: Tue, 27 Jan 2009 16:09:12 -0300 Subject: V4L/DVB (10977): STB6100 init fix, the call to stb6100_set_bandwidth needs an argument in Hz not kHz, and a comment incorrectly says MHz instead of Hz. I don't know if this caused real problems anywhere Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/stb6100.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/frontends/stb6100.c b/drivers/media/dvb/frontends/stb6100.c index ff39275ab49c..1ed5a7db4c5e 100644 --- a/drivers/media/dvb/frontends/stb6100.c +++ b/drivers/media/dvb/frontends/stb6100.c @@ -427,11 +427,11 @@ static int stb6100_init(struct dvb_frontend *fe) status->refclock = 27000000; /* Hz */ status->iqsense = 1; status->bandwidth = 36000; /* kHz */ - state->bandwidth = status->bandwidth * 1000; /* MHz */ + state->bandwidth = status->bandwidth * 1000; /* Hz */ state->reference = status->refclock / 1000; /* kHz */ /* Set default bandwidth. */ - return stb6100_set_bandwidth(fe, status->bandwidth); + return stb6100_set_bandwidth(fe, state->bandwidth); } static int stb6100_get_state(struct dvb_frontend *fe, -- cgit v1.2.3 From a00d0bb86b20a86a72f4df9d6e31dda94c02b4fa Mon Sep 17 00:00:00 2001 From: Matthias Schwarzzot Date: Tue, 27 Jan 2009 16:29:44 -0300 Subject: V4L/DVB (10978): Report tuning algorith correctly Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/bt8xx/dst.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c index 29e8f1546ab6..fec1d77fa855 100644 --- a/drivers/media/dvb/bt8xx/dst.c +++ b/drivers/media/dvb/bt8xx/dst.c @@ -1683,7 +1683,7 @@ static int dst_tune_frontend(struct dvb_frontend* fe, static int dst_get_tuning_algo(struct dvb_frontend *fe) { - return dst_algo; + return dst_algo ? DVBFE_ALGO_HW : DVBFE_ALGO_SW; } static int dst_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) -- cgit v1.2.3 From 9d51af7bd2f1d730cb6eeeb9ff837e3441ad4e07 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 10 Mar 2009 16:28:51 -0400 Subject: sata_mv: fix MSI irq race condition Fix a (rare) race condition in mv_interrupt() when using MSI. The value of hpriv->main_irq_mask_addr can change on on the fly, and without this patch we could end up writing back a stale copy to the hardware. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 7007edd2d451..74b1080d116d 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2218,12 +2218,13 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) else handled = mv_host_intr(host, pending_irqs); } - spin_unlock(&host->lock); /* for MSI: unmask; interrupt cause bits will retrigger now */ if (using_msi) writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr); + spin_unlock(&host->lock); + return IRQ_RETVAL(handled); } -- cgit v1.2.3 From e3e4385f6181f434c0d786998ad1d0eef4e21c9b Mon Sep 17 00:00:00 2001 From: Stuart MENEFY Date: Tue, 10 Mar 2009 11:38:13 +0000 Subject: libata: Keep shadow last_ctl up to date during resets libata keeps a shadow copy of the ATA CTL register (which is write only), and only writes to the hardware when the required value doesn't match the shadow. However this copy wasn't being maintained when performing reset functions. This could cause problems for the first operation after a reset when the correct value might not be written to the CTL register. This problem was observed when hotplugging a drive: the identify command was being issued with interrupts enabled, when they should have been disabled. Signed-off-by: Stuart Menefy Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 714cb046b594..f93dc029dfde 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2066,6 +2066,7 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr); udelay(20); /* FIXME: flush */ iowrite8(ap->ctl, ioaddr->ctl_addr); + ap->last_ctl = ap->ctl; /* wait the port to become ready */ return ata_sff_wait_after_reset(&ap->link, devmask, deadline); @@ -2190,8 +2191,10 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes) } /* set up device control */ - if (ap->ioaddr.ctl_addr) + if (ap->ioaddr.ctl_addr) { iowrite8(ap->ctl, ap->ioaddr.ctl_addr); + ap->last_ctl = ap->ctl; + } } EXPORT_SYMBOL_GPL(ata_sff_postreset); @@ -2534,6 +2537,7 @@ void ata_bus_reset(struct ata_port *ap) if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { /* set up device control for ATA_FLAG_SATA_RESET */ iowrite8(ap->ctl, ioaddr->ctl_addr); + ap->last_ctl = ap->ctl; } DPRINTK("EXIT\n"); -- cgit v1.2.3 From e9c1670c2a14ef9cc20d86b24b829f3947aad34e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 3 Mar 2009 13:52:16 +0900 Subject: ata_piix: add workaround for Samsung DB-P70 Samsung DB-P70 somehow botched the first ICH9 SATA port. The board doesn't expose the first port but somehow SStatus reports link online while failing SRST protocol leading to repeated probe failures and thus long boot delay. Because the BIOS doesn't carry any identifying DMI information, the port can't be blacklisted safely. Fortunately, the controller does have subsystem vendor and ID set. It's unclear whether the subsystem IDs are used only for the board but it can be safely worked around by disabling SIDPR access and just using SRST works around the problem. Even when the workaround is triggered on an unaffected board the only side effect will be missing SCR access. Signed-off-by: Tejun Heo Reported-by: Joseph Jang Reported-by: Jonghyon Sohn Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 54961c0b2c73..ef8b30d577bd 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1289,6 +1289,39 @@ static const int *__devinit piix_init_sata_map(struct pci_dev *pdev, return map; } +static bool piix_no_sidpr(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + + /* + * Samsung DB-P70 only has three ATA ports exposed and + * curiously the unconnected first port reports link online + * while not responding to SRST protocol causing excessive + * detection delay. + * + * Unfortunately, the system doesn't carry enough DMI + * information to identify the machine but does have subsystem + * vendor and device set. As it's unclear whether the + * subsystem vendor/device is used only for this specific + * board, the port can't be disabled solely with the + * information; however, turning off SIDPR access works around + * the problem. Turn it off. + * + * This problem is reported in bnc#441240. + * + * https://bugzilla.novell.com/show_bug.cgi?id=441420 + */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 && + pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG && + pdev->subsystem_device == 0xb049) { + dev_printk(KERN_WARNING, host->dev, + "Samsung DB-P70 detected, disabling SIDPR\n"); + return true; + } + + return false; +} + static int __devinit piix_init_sidpr(struct ata_host *host) { struct pci_dev *pdev = to_pci_dev(host->dev); @@ -1302,6 +1335,10 @@ static int __devinit piix_init_sidpr(struct ata_host *host) if (hpriv->map[i] == IDE) return 0; + /* is it blacklisted? */ + if (piix_no_sidpr(host)) + return 0; + if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR)) return 0; -- cgit v1.2.3 From 3eb76c1ccde496c3c0bfda23d1c803e40b762ce6 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 13 Mar 2009 21:16:12 +0100 Subject: ide-floppy: do not map dataless cmds to an sg since it fails the virt_to_page() translation check with DEBUG_VIRTUAL enabled. Signed-off-by: Borislav Petkov [bart: backport to Linus' tree] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-atapi.c | 12 ++++++++++++ drivers/ide/ide-floppy.c | 6 ++++-- 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index e96c01260598..e9d042dba0e0 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -140,6 +140,12 @@ static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, rq->cmd_flags |= REQ_PREEMPT; rq->buffer = (char *)pc; rq->rq_disk = disk; + + if (pc->req_xfer) { + rq->data = pc->buf; + rq->data_len = pc->req_xfer; + } + memcpy(rq->cmd, pc->c, 12); if (drive->media == ide_tape) rq->cmd[13] = REQ_IDETAPE_PC1; @@ -159,6 +165,12 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; rq->buffer = (char *)pc; + + if (pc->req_xfer) { + rq->data = pc->buf; + rq->data_len = pc->req_xfer; + } + memcpy(rq->cmd, pc->c, 12); if (drive->media == ide_tape) rq->cmd[13] = REQ_IDETAPE_PC1; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 3eab1c6c9b31..317ec62c33d4 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -327,8 +327,10 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, return ide_stopped; } - ide_init_sg_cmd(drive, rq); - ide_map_sg(drive, rq); + if (blk_fs_request(rq) || pc->req_xfer) { + ide_init_sg_cmd(drive, rq); + ide_map_sg(drive, rq); + } pc->sg = hwif->sg_table; pc->sg_cnt = hwif->sg_nents; -- cgit v1.2.3 From 5d82720a7f41f0c877e026c7d17e3bf20ccdbae0 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 13 Mar 2009 21:16:13 +0100 Subject: ide: save the returned value of dma_map_sg dma_map_sg could return a value different to 'nents' argument of dma_map_sg so the ide stack needs to save it for the later usage (e.g. for_each_sg). The ide stack also needs to save the original sg_nents value for pci_unmap_sg. Signed-off-by: FUJITA Tomonori [bart: backport to Linus' tree] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-dma.c | 12 +++++++++--- include/linux/ide.h | 1 + 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 72ebab0bc755..059c90bb5ad2 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -128,6 +128,7 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq) { ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg = hwif->sg_table; + int i; ide_map_sg(drive, rq); @@ -136,8 +137,13 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq) else hwif->sg_dma_direction = DMA_TO_DEVICE; - return dma_map_sg(hwif->dev, sg, hwif->sg_nents, - hwif->sg_dma_direction); + i = dma_map_sg(hwif->dev, sg, hwif->sg_nents, hwif->sg_dma_direction); + if (i) { + hwif->orig_sg_nents = hwif->sg_nents; + hwif->sg_nents = i; + } + + return i; } EXPORT_SYMBOL_GPL(ide_build_sglist); @@ -156,7 +162,7 @@ void ide_destroy_dmatable(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents, + dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->orig_sg_nents, hwif->sg_dma_direction); } EXPORT_SYMBOL_GPL(ide_destroy_dmatable); diff --git a/include/linux/ide.h b/include/linux/ide.h index e0cedfe9fad4..25087aead657 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -797,6 +797,7 @@ typedef struct hwif_s { struct scatterlist *sg_table; int sg_max_nents; /* Maximum number of entries in it */ int sg_nents; /* Current number of entries in it */ + int orig_sg_nents; int sg_dma_direction; /* dma transfer direction */ /* data phase of the active command (currently only valid for PIO/DMA) */ -- cgit v1.2.3 From 3b289d6e35a1a535c19a5b079f0500526754e650 Mon Sep 17 00:00:00 2001 From: Zhang Le Date: Thu, 12 Mar 2009 18:00:50 +0800 Subject: MIPS: Fix TIF_32BIT undefined problem when seccomp is disabled Signed-off-by: Zhang Le Signed-off-by: Ralf Baechle --- arch/mips/include/asm/seccomp.h | 4 ---- arch/mips/include/asm/thread_info.h | 6 ++++++ 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h index a6772e9507f5..ae6306ebdcad 100644 --- a/arch/mips/include/asm/seccomp.h +++ b/arch/mips/include/asm/seccomp.h @@ -15,8 +15,6 @@ */ #ifdef CONFIG_MIPS32_O32 -#define TIF_32BIT TIF_32BIT_REGS - #define __NR_seccomp_read_32 4003 #define __NR_seccomp_write_32 4004 #define __NR_seccomp_exit_32 4001 @@ -24,8 +22,6 @@ #elif defined(CONFIG_MIPS32_N32) -#define TIF_32BIT _TIF_32BIT_ADDR - #define __NR_seccomp_read_32 6000 #define __NR_seccomp_write_32 6001 #define __NR_seccomp_exit_32 6058 diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 3f76de73c943..676aa2ae1913 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -127,6 +127,12 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define TIF_LOAD_WATCH 25 /* If set, load watch registers */ #define TIF_SYSCALL_TRACE 31 /* syscall trace active */ +#ifdef CONFIG_MIPS32_O32 +#define TIF_32BIT TIF_32BIT_REGS +#elif defined(CONFIG_MIPS32_N32) +#define TIF_32BIT _TIF_32BIT_ADDR +#endif /* CONFIG_MIPS32_O32 */ + #define _TIF_SYSCALL_TRACE (1< Date: Fri, 13 Mar 2009 21:17:57 +0100 Subject: MIPS: Mark Eins: Fix configuration. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 26 +- arch/mips/Makefile | 2 +- arch/mips/configs/emma2rh_defconfig | 1439 ---------------------------------- arch/mips/configs/markeins_defconfig | 1439 ++++++++++++++++++++++++++++++++++ arch/mips/emma/Kconfig | 29 - arch/mips/emma/markeins/platform.c | 39 +- 6 files changed, 1488 insertions(+), 1486 deletions(-) delete mode 100644 arch/mips/configs/emma2rh_defconfig create mode 100644 arch/mips/configs/markeins_defconfig delete mode 100644 arch/mips/emma/Kconfig diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e61465a18c7e..206cb7953b0c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -238,8 +238,12 @@ config MIPS_SIM This option enables support for MIPS Technologies MIPSsim software emulator. -config MACH_EMMA - bool "NEC EMMA series based machines" +config NEC_MARKEINS + bool "NEC EMMA2RH Mark-eins board" + select SOC_EMMA2RH + select HW_HAS_PCI + help + This enables support for the NEC Electronics Mark-eins boards. config MACH_VR41XX bool "NEC VR4100 series based machines" @@ -637,7 +641,6 @@ endchoice source "arch/mips/alchemy/Kconfig" source "arch/mips/basler/excite/Kconfig" -source "arch/mips/emma/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" @@ -895,6 +898,18 @@ config MIPS_RM9122 bool select SERIAL_RM9000 +config SOC_EMMA2RH + bool + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select SWAP_IO_SPACE + select SYS_HAS_CPU_R5500 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + config SOC_PNX833X bool select CEVT_R4K @@ -930,11 +945,6 @@ config SOC_PNX8550 config SWAP_IO_SPACE bool -config EMMA2RH - bool - depends on MARKEINS - default y - config SERIAL_RM9000 bool diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 21b00e95daef..22dab2e14348 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -416,7 +416,7 @@ load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000 # # Common NEC EMMAXXX # -core-$(CONFIG_SOC_EMMA) += arch/mips/emma/common/ +core-$(CONFIG_SOC_EMMA2RH) += arch/mips/emma/common/ cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh # diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig deleted file mode 100644 index fea9bc9865a3..000000000000 --- a/arch/mips/configs/emma2rh_defconfig +++ /dev/null @@ -1,1439 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:29 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -CONFIG_MARKEINS=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_EMMA2RH=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -CONFIG_CPU_R5000=y -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R5000=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -# CONFIG_PREEMPT_NONE is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -CONFIG_IPV6_MIP6=y -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_SIT=m -# CONFIG_IPV6_TUNNEL is not set -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_GRE=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_NF_NAT_SIP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -CONFIG_NF_CONNTRACK_IPV6=m -# CONFIG_IP6_NF_QUEUE is not set -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_RAW=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set -CONFIG_FIB_RULES=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x1e000000 -CONFIG_MTD_PHYSMAP_LEN=0x02000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_TGT=m -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -CONFIG_NATSEMI=y -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -# CONFIG_PPP_BSDCOMP is not set -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -CONFIG_RTC=m -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PASEMI is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -CONFIG_I2C_DEBUG_CORE=y -# CONFIG_I2C_DEBUG_ALGO is not set -CONFIG_I2C_DEBUG_BUS=y -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -# CONFIG_HID is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=m -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m -# CONFIG_FUSE_FS is not set -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw" - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig new file mode 100644 index 000000000000..bad8901f8f3c --- /dev/null +++ b/arch/mips/configs/markeins_defconfig @@ -0,0 +1,1439 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Tue Feb 20 21:47:29 2007 +# +CONFIG_MIPS=y + +# +# Machine selection +# +CONFIG_ZONE_DMA=y +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_WR_PPMC is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_YOSEMITE is not set +CONFIG_NEC_MARKEINS=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SNI_RM is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_SOC_EMMA2RH=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +CONFIG_CPU_R5000=y +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_R5000=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_VPE_LOADER is not set +# CONFIG_64BIT_PHYS_ADDR is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +CONFIG_HZ_1000=y +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=1000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y +# CONFIG_KEXEC is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_MMU=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +CONFIG_IPV6_MIP6=y +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_TUNNEL is not set +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_NF_CONNTRACK_IPV6=m +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_RAW=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set +CONFIG_FIB_RULES=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +CONFIG_SCSI_AIC94XX=m +# CONFIG_AIC94XX_DEBUG is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +CONFIG_NATSEMI=y +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m +# CONFIG_ATL1 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +CONFIG_RTC=m +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PASEMI is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_I2C_DEBUG_CORE=y +# CONFIG_I2C_DEBUG_ALGO is not set +CONFIG_I2C_DEBUG_BUS=y +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +# CONFIG_HID is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Auxiliary Display support +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CAMELLIA=m +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/emma/Kconfig b/arch/mips/emma/Kconfig deleted file mode 100644 index 9669c72123c9..000000000000 --- a/arch/mips/emma/Kconfig +++ /dev/null @@ -1,29 +0,0 @@ -choice - prompt "Machine type" - depends on MACH_EMMA - default NEC_MARKEINS - -config NEC_MARKEINS - bool "NEC EMMA2RH Mark-eins board" - select SOC_EMMA2RH - select HW_HAS_PCI - help - This enables support for the NEC Electronics Mark-eins boards. - -endchoice - -config SOC_EMMA2RH - bool - select SOC_EMMA - select SYS_HAS_CPU_R5500 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - -config SOC_EMMA - bool - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select IRQ_CPU - select SWAP_IO_SPACE - select SYS_SUPPORTS_BIG_ENDIAN diff --git a/arch/mips/emma/markeins/platform.c b/arch/mips/emma/markeins/platform.c index 88e87f6b3442..d5f47e4f0d18 100644 --- a/arch/mips/emma/markeins/platform.c +++ b/arch/mips/emma/markeins/platform.c @@ -141,13 +141,6 @@ static struct platform_device serial_emma = { }, }; -static struct platform_device *devices[] = { - &i2c_emma_devices[0], - &i2c_emma_devices[1], - &i2c_emma_devices[2], - &serial_emma, -}; - static struct mtd_partition markeins_parts[] = { [0] = { .name = "RootFS", @@ -181,11 +174,39 @@ static struct mtd_partition markeins_parts[] = { }, }; +static struct physmap_flash_data markeins_flash_data = { + .width = 2, + .nr_parts = ARRAY_SIZE(markeins_parts), + .parts = markeins_parts +}; + +static struct resource markeins_flash_resource = { + .start = 0x1e000000, + .end = 0x02000000, + .flags = IORESOURCE_MEM +}; + +static struct platform_device markeins_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &markeins_flash_data, + }, + .num_resources = 1, + .resource = &markeins_flash_resource, +}; + +static struct platform_device *devices[] = { + i2c_emma_devices, + i2c_emma_devices + 1, + i2c_emma_devices + 2, + &serial_emma, + &markeins_flash_device, +}; + static int __init platform_devices_setup(void) { - physmap_set_partitions(markeins_parts, ARRAY_SIZE(markeins_parts)); return platform_add_devices(devices, ARRAY_SIZE(devices)); } arch_initcall(platform_devices_setup); - -- cgit v1.2.3 From 020fe22ff14320927f394de222cbb11708bcc7a8 Mon Sep 17 00:00:00 2001 From: Enrik Berkhan Date: Fri, 13 Mar 2009 13:51:56 -0700 Subject: nommu: ramfs: pages allocated to an inode's pagecache may get wrongly discarded The pages attached to a ramfs inode's pagecache by truncation from nothing - as done by SYSV SHM for example - may get discarded under memory pressure. The problem is that the pages are not marked dirty. Anything that creates data in an MMU-based ramfs will cause the pages holding that data will cause the set_page_dirty() aop to be called. For the NOMMU-based mmap, set_page_dirty() may be called by write(), but it won't be called by page-writing faults on writable mmaps, and it isn't called by ramfs_nommu_expand_for_mapping() when a file is being truncated from nothing to allocate a contiguous run. The solution is to mark the pages dirty at the point of allocation by the truncation code. Signed-off-by: Enrik Berkhan Signed-off-by: David Howells Cc: Peter Zijlstra Cc: Nick Piggin Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ramfs/file-nommu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c index b9b567a28376..90d72bead55b 100644 --- a/fs/ramfs/file-nommu.c +++ b/fs/ramfs/file-nommu.c @@ -114,6 +114,9 @@ int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize) if (!pagevec_add(&lru_pvec, page)) __pagevec_lru_add_file(&lru_pvec); + /* prevent the page from being discarded on memory pressure */ + SetPageDirty(page); + unlock_page(page); } -- cgit v1.2.3 From 15e7b8767605dc0cb9bd4594caabfec392385210 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Fri, 13 Mar 2009 13:51:58 -0700 Subject: nommu: ramfs: don't leak pages when adding to page cache fails When a ramfs nommu mapping is expanded, contiguous pages are allocated and added to the pagecache. The caller's reference is then passed on by moving whole pagevecs to the file lru list. If the page cache adding fails, make sure that the error path also moves the pagevec contents which might still contain up to PAGEVEC_SIZE successfully added pages, of which we would leak references otherwise. Signed-off-by: Johannes Weiner Cc: David Howells Cc: Enrik Berkhan Cc: Nick Piggin Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ramfs/file-nommu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c index 90d72bead55b..5d7c7ececa64 100644 --- a/fs/ramfs/file-nommu.c +++ b/fs/ramfs/file-nommu.c @@ -129,6 +129,7 @@ int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize) return -EFBIG; add_error: + pagevec_lru_add_file(&lru_pvec); page_cache_release(pages + loop); for (loop++; loop < npages; loop++) __free_page(pages + loop); -- cgit v1.2.3 From 84814d642a4f1f294bd675ab11aae1ca54c6cedb Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Fri, 13 Mar 2009 13:51:59 -0700 Subject: eCryptfs: don't encrypt file key with filename key eCryptfs has file encryption keys (FEK), file encryption key encryption keys (FEKEK), and filename encryption keys (FNEK). The per-file FEK is encrypted with one or more FEKEKs and stored in the header of the encrypted file. I noticed that the FEK is also being encrypted by the FNEK. This is a problem if a user wants to use a different FNEK than their FEKEK, as their file contents will still be accessible with the FNEK. This is a minimalistic patch which prevents the FNEKs signatures from being copied to the inode signatures list. Ultimately, it keeps the FEK from being encrypted with a FNEK. Signed-off-by: Tyler Hicks Cc: Serge Hallyn Acked-by: Dustin Kirkland Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ecryptfs/crypto.c | 2 ++ fs/ecryptfs/ecryptfs_kernel.h | 3 ++- fs/ecryptfs/keystore.c | 3 ++- fs/ecryptfs/main.c | 5 +++-- 4 files changed, 9 insertions(+), 4 deletions(-) diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index f6caeb1d1106..bdca1f4b3a3e 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -946,6 +946,8 @@ static int ecryptfs_copy_mount_wide_sigs_to_inode_sigs( list_for_each_entry(global_auth_tok, &mount_crypt_stat->global_auth_tok_list, mount_crypt_stat_list) { + if (global_auth_tok->flags & ECRYPTFS_AUTH_TOK_FNEK) + continue; rc = ecryptfs_add_keysig(crypt_stat, global_auth_tok->sig); if (rc) { printk(KERN_ERR "Error adding keysig; rc = [%d]\n", rc); diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index c11fc95714ab..eb2267eca1fe 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -328,6 +328,7 @@ struct ecryptfs_dentry_info { */ struct ecryptfs_global_auth_tok { #define ECRYPTFS_AUTH_TOK_INVALID 0x00000001 +#define ECRYPTFS_AUTH_TOK_FNEK 0x00000002 u32 flags; struct list_head mount_crypt_stat_list; struct key *global_auth_tok_key; @@ -696,7 +697,7 @@ ecryptfs_write_header_metadata(char *virt, int ecryptfs_add_keysig(struct ecryptfs_crypt_stat *crypt_stat, char *sig); int ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat, - char *sig); + char *sig, u32 global_auth_tok_flags); int ecryptfs_get_global_auth_tok_for_sig( struct ecryptfs_global_auth_tok **global_auth_tok, struct ecryptfs_mount_crypt_stat *mount_crypt_stat, char *sig); diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c index ff539420cc6f..e4a6223c3145 100644 --- a/fs/ecryptfs/keystore.c +++ b/fs/ecryptfs/keystore.c @@ -2375,7 +2375,7 @@ struct kmem_cache *ecryptfs_global_auth_tok_cache; int ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat, - char *sig) + char *sig, u32 global_auth_tok_flags) { struct ecryptfs_global_auth_tok *new_auth_tok; int rc = 0; @@ -2389,6 +2389,7 @@ ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat, goto out; } memcpy(new_auth_tok->sig, sig, ECRYPTFS_SIG_SIZE_HEX); + new_auth_tok->flags = global_auth_tok_flags; new_auth_tok->sig[ECRYPTFS_SIG_SIZE_HEX] = '\0'; mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex); list_add(&new_auth_tok->mount_crypt_stat_list, diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 789cf2e1be1e..aed56c25539b 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -319,7 +319,7 @@ static int ecryptfs_parse_options(struct super_block *sb, char *options) case ecryptfs_opt_ecryptfs_sig: sig_src = args[0].from; rc = ecryptfs_add_global_auth_tok(mount_crypt_stat, - sig_src); + sig_src, 0); if (rc) { printk(KERN_ERR "Error attempting to register " "global sig; rc = [%d]\n", rc); @@ -370,7 +370,8 @@ static int ecryptfs_parse_options(struct super_block *sb, char *options) ECRYPTFS_SIG_SIZE_HEX] = '\0'; rc = ecryptfs_add_global_auth_tok( mount_crypt_stat, - mount_crypt_stat->global_default_fnek_sig); + mount_crypt_stat->global_default_fnek_sig, + ECRYPTFS_AUTH_TOK_FNEK); if (rc) { printk(KERN_ERR "Error attempting to register " "global fnek sig [%s]; rc = [%d]\n", -- cgit v1.2.3 From 1d885526f2f3fffacee2ecb541270bd00168adff Mon Sep 17 00:00:00 2001 From: Daisuke Nishimura Date: Fri, 13 Mar 2009 13:52:00 -0700 Subject: vmscan: pgmoved should be cleared after updating recent_rotated pgmoved should be cleared after updating recent_rotated. Signed-off-by: Daisuke Nishimura Cc: Rik van Riel Cc: Lee Schermerhorn Acked-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index e89517141657..56ddf41149eb 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1262,7 +1262,6 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone, * Move the pages to the [file or anon] inactive list. */ pagevec_init(&pvec, 1); - pgmoved = 0; lru = LRU_BASE + file * LRU_FILE; spin_lock_irq(&zone->lru_lock); @@ -1274,6 +1273,7 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone, */ reclaim_stat->recent_rotated[!!file] += pgmoved; + pgmoved = 0; while (!list_empty(&l_inactive)) { page = lru_to_page(&l_inactive); prefetchw_prev_lru_page(page, &l_inactive, flags); -- cgit v1.2.3 From 87092698c665e0a358caf9825ae13114343027e8 Mon Sep 17 00:00:00 2001 From: un'ichi Nomura Date: Mon, 9 Mar 2009 10:40:52 +0100 Subject: block: Add gfp_mask parameter to bio_integrity_clone() Stricter gfp_mask might be required for clone allocation. For example, request-based dm may clone bio in interrupt context so it has to use GFP_ATOMIC. Signed-off-by: Kiyoshi Ueda Signed-off-by: Jun'ichi Nomura Acked-by: Martin K. Petersen Cc: Alasdair G Kergon Signed-off-by: Jens Axboe --- fs/bio-integrity.c | 5 +++-- fs/bio.c | 2 +- include/linux/bio.h | 4 ++-- 3 files changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c index 549b0144da11..fe2b1aa2464e 100644 --- a/fs/bio-integrity.c +++ b/fs/bio-integrity.c @@ -685,19 +685,20 @@ EXPORT_SYMBOL(bio_integrity_split); * bio_integrity_clone - Callback for cloning bios with integrity metadata * @bio: New bio * @bio_src: Original bio + * @gfp_mask: Memory allocation mask * @bs: bio_set to allocate bip from * * Description: Called to allocate a bip when cloning a bio */ int bio_integrity_clone(struct bio *bio, struct bio *bio_src, - struct bio_set *bs) + gfp_t gfp_mask, struct bio_set *bs) { struct bio_integrity_payload *bip_src = bio_src->bi_integrity; struct bio_integrity_payload *bip; BUG_ON(bip_src == NULL); - bip = bio_integrity_alloc_bioset(bio, GFP_NOIO, bip_src->bip_vcnt, bs); + bip = bio_integrity_alloc_bioset(bio, gfp_mask, bip_src->bip_vcnt, bs); if (bip == NULL) return -EIO; diff --git a/fs/bio.c b/fs/bio.c index 124b95c4d582..cf747378b977 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -463,7 +463,7 @@ struct bio *bio_clone(struct bio *bio, gfp_t gfp_mask) if (bio_integrity(bio)) { int ret; - ret = bio_integrity_clone(b, bio, fs_bio_set); + ret = bio_integrity_clone(b, bio, gfp_mask, fs_bio_set); if (ret < 0) return NULL; diff --git a/include/linux/bio.h b/include/linux/bio.h index 1b16108a5417..d8bd43bfdcf5 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -531,7 +531,7 @@ extern void bio_integrity_endio(struct bio *, int); extern void bio_integrity_advance(struct bio *, unsigned int); extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int); extern void bio_integrity_split(struct bio *, struct bio_pair *, int); -extern int bio_integrity_clone(struct bio *, struct bio *, struct bio_set *); +extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t, struct bio_set *); extern int bioset_integrity_create(struct bio_set *, int); extern void bioset_integrity_free(struct bio_set *); extern void bio_integrity_init_slab(void); @@ -542,7 +542,7 @@ extern void bio_integrity_init_slab(void); #define bioset_integrity_create(a, b) (0) #define bio_integrity_prep(a) (0) #define bio_integrity_enabled(a) (0) -#define bio_integrity_clone(a, b, c) (0) +#define bio_integrity_clone(a, b, c,d ) (0) #define bioset_integrity_free(a) do { } while (0) #define bio_integrity_free(a, b) do { } while (0) #define bio_integrity_endio(a, b) do { } while (0) -- cgit v1.2.3 From 059ea3318c8ede71851a52b4359fbf1ab0cec301 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 9 Mar 2009 10:42:45 +0100 Subject: block: fix memory leak in bio_clone() If bio_integrity_clone() fails, bio_clone() returns NULL without freeing the newly allocated bio. Signed-off-by: Li Zefan Signed-off-by: Jens Axboe --- fs/bio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/bio.c b/fs/bio.c index cf747378b977..d4f06327c810 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -465,8 +465,10 @@ struct bio *bio_clone(struct bio *bio, gfp_t gfp_mask) ret = bio_integrity_clone(b, bio, gfp_mask, fs_bio_set); - if (ret < 0) + if (ret < 0) { + bio_put(b); return NULL; + } } return b; -- cgit v1.2.3 From bfbd442f69ec9c58590ffc6e93ac8d6809caa48b Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 9 Mar 2009 13:42:24 +0100 Subject: Fix Xilinx SystemACE driver to handle empty CF slot The SystemACE driver does not handle an empty CF slot gracefully. An empty CF slot ends up hanging the system. This patch adds a check for the CF state and stops trying to process requests if the slot is empty. Signed-off-by: Grant Likely Signed-off-by: Jens Axboe --- drivers/block/xsysace.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index 381d686fc1a3..119be3442f28 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -489,6 +489,28 @@ static void ace_fsm_dostate(struct ace_device *ace) ace->fsm_state, ace->id_req_count); #endif + /* Verify that there is actually a CF in the slot. If not, then + * bail out back to the idle state and wake up all the waiters */ + status = ace_in32(ace, ACE_STATUS); + if ((status & ACE_STATUS_CFDETECT) == 0) { + ace->fsm_state = ACE_FSM_STATE_IDLE; + ace->media_change = 1; + set_capacity(ace->gd, 0); + dev_info(ace->dev, "No CF in slot\n"); + + /* Drop all pending requests */ + while ((req = elv_next_request(ace->queue)) != NULL) + end_request(req, 0); + + /* Drop back to IDLE state and notify waiters */ + ace->fsm_state = ACE_FSM_STATE_IDLE; + ace->id_result = -EIO; + while (ace->id_req_count) { + complete(&ace->id_completion); + ace->id_req_count--; + } + } + switch (ace->fsm_state) { case ACE_FSM_STATE_IDLE: /* See if there is anything to do */ -- cgit v1.2.3 From 5bee17f18b595937e6beafeee5197868a3f74a06 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Sat, 14 Mar 2009 19:40:59 -0400 Subject: parisc: sba_iommu: fix build bug when CONFIG_PARISC_AGP=y CC drivers/parisc/sba_iommu.o drivers/parisc/sba_iommu.c:1373: error: expected identifier or '(' before '}' token make[2]: *** [drivers/parisc/sba_iommu.o] Error 1 make[1]: *** [drivers/parisc] Error 2 make: *** [drivers] Error 2 Don't know how this has gone missed for so long... clearly I need to do builds on my C8000 more often. Signed-off-by: Kyle McMartin Signed-off-by: Linus Torvalds --- drivers/parisc/sba_iommu.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 6aad8546fd24..e5999c4cedc8 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -1367,9 +1367,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) ioc->pdir_size /= 2; ioc->pdir_base[PDIR_INDEX(iova_space_size/2)] = SBA_AGPGART_COOKIE; } -} #endif /*SBA_AGP_SUPPORT*/ - } static void -- cgit v1.2.3