From f9e5908fa04e15a681dc4695b53c2c0c1d9b9a03 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 22:16:26 +0100 Subject: ARM: OMAP1: Update dpll1 default rate reprogramming method According to comments in omap1_select_table_rate(), reprogramming dpll1 is tricky, and should always be done from SRAM. While being at it, move OMAP730 special case handling inside omap_sram_reprogram_clock(). Created on top of version 2 of the series "ARM: OMAP1: Fix dpll1 reprogramming related issues", which it depends on. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock.c | 6 +----- arch/arm/mach-omap1/clock_data.c | 7 +++++-- arch/arm/plat-omap/sram.c | 3 +++ 3 files changed, 9 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index ff27dbdba3d6..6d8f7c640237 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -218,12 +218,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate) /* * In most cases we should not need to reprogram DPLL. * Reprogramming the DPLL is tricky, it must be done from SRAM. - * (on 730, bit 13 must always be 1) */ - if (cpu_is_omap7xx()) - omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000); - else - omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); /* XXX Do we need to recalculate the tree below DPLL1 at this point? */ ck_dpll1_p->rate = ptr->pll_rate; diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index ff2d5248df23..9d1a42a5afd8 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -25,6 +25,7 @@ #include #include #include +#include /* for omap_sram_reprogram_clock() */ #include /* for OTG_BASE */ #include "clock.h" @@ -944,8 +945,10 @@ void __init omap1_clk_late_init(void) /* Find the highest supported frequency and enable it */ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); - omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL); + /* + * Reprogramming the DPLL is tricky, it must be done from SRAM. + */ + omap_sram_reprogram_clock(0x2290, 0x0005); ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; } propagate_rate(&ck_dpll1); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 574351902c83..6b058a621e8d 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -222,6 +222,9 @@ static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) { BUG_ON(!_omap_sram_reprogram_clock); + /* On 730, bit 13 must always be 1 */ + if (cpu_is_omap7xx()) + ckctl |= 0x2000; _omap_sram_reprogram_clock(dpllctl, ckctl); } -- cgit v1.2.3