From 777baca07ef179301e363b10a14c428e5ebbd6a6 Mon Sep 17 00:00:00 2001 From: Stefan Popa Date: Wed, 4 Jul 2018 17:32:53 +0300 Subject: dt-bindings: iio: dac: Add docs for AD5758 DAC Signed-off-by: Stefan Popa Reviewed-by: Rob Herring Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/iio/dac/ad5758.txt | 78 ++++++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/dac/ad5758.txt (limited to 'Documentation/devicetree/bindings/iio') diff --git a/Documentation/devicetree/bindings/iio/dac/ad5758.txt b/Documentation/devicetree/bindings/iio/dac/ad5758.txt new file mode 100644 index 000000000000..bba01a5cab1b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ad5758.txt @@ -0,0 +1,78 @@ +Analog Devices AD5758 DAC device driver + +Required properties for the AD5758: + - compatible: Must be "adi,ad5758" + - reg: SPI chip select number for the device + - spi-max-frequency: Max SPI frequency to use (< 50000000) + - spi-cpha: is the only mode that is supported + +Required properties: + + - adi,dc-dc-mode: Mode of operation of the dc-to-dc converter + Dynamic Power Control (DPC) + In this mode, the AD5758 circuitry senses the output + voltage and dynamically regulates the supply voltage, + VDPC+, to meet compliance requirements plus an optimized + headroom voltage for the output buffer. + + Programmable Power Control (PPC) + In this mode, the VDPC+ voltage is user-programmable to + a fixed level that needs to accommodate the maximum output + load required. + + The output of the DAC core is either converted to a + current or voltage output at the VIOUT pin. Only one mode + can be enabled at any one time. + + The following values are currently supported: + * 1: DPC current mode + * 2: DPC voltage mode + * 3: PPC current mode + + Depending on the selected output mode (voltage or current) one of the + two properties must + be present: + + - adi,range-microvolt: Voltage output range + The array of voltage output ranges must contain two fields: + * <0 5000000>: 0 V to 5 V voltage range + * <0 10000000>: 0 V to 10 V voltage range + * <(-5000000) 5000000>: ±5 V voltage range + * <(-10000000) 10000000>: ±10 V voltage range + - adi,range-microamp: Current output range + The array of current output ranges must contain two fields: + * <0 20000>: 0 mA to 20 mA current range + * <0 24000>: 0 mA to 24 mA current range + * <4 24000>: 4 mA to 20 mA current range + * <(-20000) 20000>: ±20 mA current range + * <(-24000) 24000>: ±24 mA current range + * <(-1000) 22000>: −1 mA to +22 mA current range + +Optional properties: + + - adi,dc-dc-ilim-microamp: The dc-to-dc converter current limit + The following values are currently supported [uA]: + * 150000 + * 200000 + * 250000 + * 300000 + * 350000 + * 400000 + + - adi,slew-time-us: The time it takes for the output to reach the + full scale [uS] + The supported range is between 133us up to 1023984375us + +AD5758 Example: + + dac@0 { + compatible = "adi,ad5758"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpha; + + adi,dc-dc-mode = <2>; + adi,range-microvolt = <0 10000000>; + adi,dc-dc-ilim-microamp = <200000>; + adi,slew-time-us = <125000>; + }; -- cgit v1.2.3