From e938fbfd4a7ac829d48b767c4dc365535d5c4f97 Mon Sep 17 00:00:00 2001 From: Florian Ragwitz Date: Mon, 3 May 2010 23:29:37 -0700 Subject: Input: elantech - ignore high bits in the position coordinates In older versions of the elantech hardware/firmware those bits always were unset, so it didn't actually matter, but newer versions seem to use those high bits for something else, screwing up the coordinates we report to the input layer for those devices. Signed-off-by: Florian Ragwitz Signed-off-by: Dmitry Torokhov --- Documentation/input/elantech.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt index a10c3b6ba7c4..56941ae1f5db 100644 --- a/Documentation/input/elantech.txt +++ b/Documentation/input/elantech.txt @@ -333,14 +333,14 @@ byte 0: byte 1: bit 7 6 5 4 3 2 1 0 - x15 x14 x13 x12 x11 x10 x9 x8 + . . . . . x10 x9 x8 byte 2: bit 7 6 5 4 3 2 1 0 x7 x6 x5 x4 x4 x2 x1 x0 - x15..x0 = absolute x value (horizontal) + x10..x0 = absolute x value (horizontal) byte 3: @@ -350,14 +350,14 @@ byte 3: byte 4: bit 7 6 5 4 3 2 1 0 - y15 y14 y13 y12 y11 y10 y8 y8 + . . . . . . y9 y8 byte 5: bit 7 6 5 4 3 2 1 0 y7 y6 y5 y4 y3 y2 y1 y0 - y15..y0 = absolute y value (vertical) + y9..y0 = absolute y value (vertical) 4.2.2 Two finger touch -- cgit v1.2.3 From 40868c85b8dfe233192f29099f45348f5b363ce9 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 5 May 2010 17:27:10 +0400 Subject: libata: Fix several inaccuracies in developer's guide Commit 6bfff31e77cfa1b13490337e5a4dbaa3407e83ac (libata: kill probe_ent and related helpers) killed ata_device_add() but didn't remove references to it from the libata developer's guide. Commits 9363c3825ea9ad76561eb48a395349dd29211ed6 (libata: rename SFF functions) and 5682ed33aae05d10a25c95633ef9d9c062825888 (libata: rename SFF port ops) renamed the taskfile access methods but didn't update the developer's guide. Commit c9f75b04ed5ed65a058d18a8a8dda50632a96de8 (libata: kill ata_noop_dev_select()) didn't update the developer's guide as well. The guide also refers to the long gone ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), and ata_mmio_data_xfer() -- replace those by the modern ata_sff_data_xfer_noirq(), ata_sff_data_xfer(), and ata_sff_data_xfer32(). Also, remove the reference to non-existant ata_port_stop()... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- Documentation/DocBook/libata.tmpl | 49 +++++++++++++-------------------------- 1 file changed, 16 insertions(+), 33 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index ba9975771503..ff3e5bec1c24 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *); issue of SET FEATURES - XFER MODE, and prior to operation. - Called by ata_device_add() after ata_dev_identify() determines - a device is present. - - This entry may be specified as NULL in ata_port_operations. @@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in Taskfile read/write -void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf); -void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf); @@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); hardware registers / DMA buffers, to obtain the current set of taskfile register values. Most drivers for taskfile-based hardware (PIO or MMIO) use - ata_tf_load() and ata_tf_read() for these hooks. + ata_sff_tf_load() and ata_sff_tf_read() for these hooks. PIO data read/write -void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); +void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); All bmdma-style drivers must implement this hook. This is the low-level operation that actually copies the data bytes during a PIO data transfer. -Typically the driver -will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or -ata_mmio_data_xfer(). +Typically the driver will choose one of ata_sff_data_xfer_noirq(), +ata_sff_data_xfer(), or ata_sff_data_xfer32(). ATA command execute -void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf); causes an ATA command, previously loaded with ->tf_load(), to be initiated in hardware. - Most drivers for taskfile-based hardware use ata_exec_command() + Most drivers for taskfile-based hardware use ata_sff_exec_command() for this hook. @@ -218,8 +213,8 @@ command. Read specific ATA shadow registers -u8 (*check_status)(struct ata_port *ap); -u8 (*check_altstatus)(struct ata_port *ap); +u8 (*sff_check_status)(struct ata_port *ap); +u8 (*sff_check_altstatus)(struct ata_port *ap); @@ -227,20 +222,14 @@ u8 (*check_altstatus)(struct ata_port *ap); hardware. On some hardware, reading the Status register has the side effect of clearing the interrupt condition. Most drivers for taskfile-based hardware use - ata_check_status() for this hook. - - - Note that because this is called from ata_device_add(), at - least a dummy function that clears device interrupts must be - provided for all drivers, even if the controller doesn't - actually have a taskfile status register. + ata_sff_check_status() for this hook. Select ATA device on bus -void (*dev_select)(struct ata_port *ap, unsigned int device); +void (*sff_dev_select)(struct ata_port *ap, unsigned int device); @@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device); Most drivers for taskfile-based hardware use - ata_std_dev_select() for this hook. Controllers which do not - support second drives on a port (such as SATA contollers) will - use ata_noop_dev_select(). + ata_sff_dev_select() for this hook. @@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *); to struct ata_host_set. - Most legacy IDE drivers use ata_interrupt() for the + Most legacy IDE drivers use ata_sff_interrupt() for the irq_handler hook, which scans all ports in the host_set, determines which queued command was active (if any), and calls - ata_host_intr(ap,qc). + ata_sff_host_intr(ap,qc). - Most legacy IDE drivers use ata_bmdma_irq_clear() for the + Most legacy IDE drivers use ata_sff_irq_clear() for the irq_clear() hook, which simply clears the interrupt and error flags in the DMA status register. @@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set); data from port at this time. - Many drivers use ata_port_stop() as this hook, which frees the - PRD table. - - ->host_stop() is called after all ->port_stop() calls have completed. The hook must finalize hardware shutdown, release DMA and other resources, etc. -- cgit v1.2.3