From 1484276119fb5083a3a8cb0293e763363c317661 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 7 Jan 2015 01:39:52 +0300 Subject: clk: shmobile: Add R-Car Gen2 ADSP clock support Add the ADSP clock support to the R-Car generation 2 CPG driver. This clock gets derived from PLL1. The layout of the ADSPCKCR register is similar to those of the clocks supported by the 'clk-div6' driver but the divider encoding is non-linear, so can't be supported by that driver... Based on the original patch by Konstantin Kozhevnikov . Signed-off-by: Sergei Shtylyov Signed-off-by: Geert Uytterhoeven --- .../devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt index 5b704b5ab8ab..b02944fba9de 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt @@ -18,7 +18,8 @@ Required Properties: to the USB_EXTAL clock - #clock-cells: Must be 1 - clock-output-names: The names of the clocks. Supported clocks are "main", - "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", and "rcan" + "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and + "adsp" Example @@ -32,5 +33,5 @@ Example #clock-cells = <1>; clock-output-names = "main", "pll0, "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", - "rcan"; + "rcan", "adsp"; }; -- cgit v1.2.3