From 74941a69afcc06722685d492784414ec042ab492 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Wed, 18 Jul 2007 23:45:31 -0300 Subject: ACPI: thinkpad-acpi: export to sysfs the state of the radio slider switch Some ThinkPad models, notably the T60 and X60, have a slider switch to enable and disable the radios. The switch has the capability of force-disabling the radios in hardware on most models, and it is supposed to affect all radios (WLAN, WWAN, BlueTooth). Export the switch state as a sysfs attribute, on ThinkPads where it is available. Thanks to Henning Schild for asking for this feature, and for tracking down the EC register that holds the radio switch state. Signed-off-by: Henrique de Moraes Holschuh Cc: Henning Schild Signed-off-by: Len Brown --- Documentation/thinkpad-acpi.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index 142a14fa1d91..fe26e50a2b15 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -227,6 +227,12 @@ sysfs notes: supported hot keys, except those which are handled by the firmware. Echo it to hotkey_mask above, to use. + hotkey_radio_sw: + if the ThinkPad has a hardware radio switch, this + attribute will read 0 if the switch is in the "radios + disabled" postition, and 1 if the switch is in the + "radios enabled" position. + Bluetooth --------- -- cgit v1.2.3