From 2547476a5e4061f6addb88d5fc837d3a950f54c4 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 13:45:35 +0200 Subject: Fix typos Signed-off-by: Andrea Gelmini Signed-off-by: Vineet Gupta --- arch/arc/mm/cache.c | 6 +++--- arch/arc/mm/dma.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arc/mm') diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 9e5eddbb856f..5a294b2c3cb3 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -215,7 +215,7 @@ slc_chk: * ------------------ * This ver of MMU supports variable page sizes (1k-16k): although Linux will * only support 8k (default), 16k and 4k. - * However from hardware perspective, smaller page sizes aggrevate aliasing + * However from hardware perspective, smaller page sizes aggravate aliasing * meaning more vaddr bits needed to disambiguate the cache-line-op ; * the existing scheme of piggybacking won't work for certain configurations. * Two new registers IC_PTAG and DC_PTAG inttoduced. @@ -302,7 +302,7 @@ void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr, /* * This is technically for MMU v4, using the MMU v3 programming model - * Special work for HS38 aliasing I-cache configuratino with PAE40 + * Special work for HS38 aliasing I-cache configuration with PAE40 * - upper 8 bits of paddr need to be written into PTAG_HI * - (and needs to be written before the lower 32 bits) * Note that PTAG_HI is hoisted outside the line loop @@ -936,7 +936,7 @@ void arc_cache_init(void) ic->ver, CONFIG_ARC_MMU_VER); /* - * In MMU v4 (HS38x) the alising icache config uses IVIL/PTAG + * In MMU v4 (HS38x) the aliasing icache config uses IVIL/PTAG * pair to provide vaddr/paddr respectively, just as in MMU v3 */ if (is_isa_arcv2() && ic->alias) diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c index 8c8e36fa5659..73d7e4c75b7d 100644 --- a/arch/arc/mm/dma.c +++ b/arch/arc/mm/dma.c @@ -10,7 +10,7 @@ * DMA Coherent API Notes * * I/O is inherently non-coherent on ARC. So a coherent DMA buffer is - * implemented by accessintg it using a kernel virtual address, with + * implemented by accessing it using a kernel virtual address, with * Cache bit off in the TLB entry. * * The default DMA address == Phy address which is 0x8000_0000 based. -- cgit v1.2.3