From db0d4db22a78d31c59087f7057b8f1612fecc35d Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sat, 12 Nov 2011 16:09:49 +0000 Subject: ARM: gic: allow GIC to support non-banked setups The GIC support code is heavily using the fact that hardware implementations are exposing banked registers. Unfortunately, it looks like at least one GIC implementation (EXYNOS) offers both the distributor and the CPU interfaces at different addresses, depending on the CPU. This problem is solved by allowing the distributor and CPU interface addresses to be per-cpu variables for the platforms that require it. The EXYNOS code is updated not to mess with the GIC internals while handling interrupts, and struct gic_chip_data is back to being private. The DT binding for the gic is updated to allow an optional "cpu-offset" value, which is used to compute the various base addresses. Finally, a new config option (GIC_NON_BANKED) is used to control this feature, so the overhead is only present on kernels compiled with support for EXYNOS. Tested on Origen (EXYNOS4) and Panda (OMAP4). Cc: Kukjin Kim Cc: Will Deacon Cc: Thomas Abraham Acked-by: Rob Herring Signed-off-by: Marc Zyngier --- arch/arm/common/Kconfig | 3 ++ arch/arm/common/gic.c | 133 +++++++++++++++++++++++++++++++++++++++++------- 2 files changed, 117 insertions(+), 19 deletions(-) (limited to 'arch/arm/common') diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 74df9ca2be31..a3beda1213da 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -2,6 +2,9 @@ config ARM_GIC select IRQ_DOMAIN bool +config GIC_NON_BANKED + bool + config ARM_VIC bool diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 0e6ae470c94f..43cb6f1a7cf2 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -43,6 +43,31 @@ #include #include +union gic_base { + void __iomem *common_base; + void __percpu __iomem **percpu_base; +}; + +struct gic_chip_data { + unsigned int irq_offset; + union gic_base dist_base; + union gic_base cpu_base; +#ifdef CONFIG_CPU_PM + u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)]; + u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)]; + u32 saved_spi_target[DIV_ROUND_UP(1020, 4)]; + u32 __percpu *saved_ppi_enable; + u32 __percpu *saved_ppi_conf; +#endif +#ifdef CONFIG_IRQ_DOMAIN + struct irq_domain domain; +#endif + unsigned int gic_irqs; +#ifdef CONFIG_GIC_NON_BANKED + void __iomem *(*get_base)(union gic_base *); +#endif +}; + static DEFINE_RAW_SPINLOCK(irq_controller_lock); /* Address of GIC 0 CPU interface */ @@ -67,16 +92,48 @@ struct irq_chip gic_arch_extn = { static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly; +#ifdef CONFIG_GIC_NON_BANKED +static void __iomem *gic_get_percpu_base(union gic_base *base) +{ + return *__this_cpu_ptr(base->percpu_base); +} + +static void __iomem *gic_get_common_base(union gic_base *base) +{ + return base->common_base; +} + +static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data) +{ + return data->get_base(&data->dist_base); +} + +static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data) +{ + return data->get_base(&data->cpu_base); +} + +static inline void gic_set_base_accessor(struct gic_chip_data *data, + void __iomem *(*f)(union gic_base *)) +{ + data->get_base = f; +} +#else +#define gic_data_dist_base(d) ((d)->dist_base.common_base) +#define gic_data_cpu_base(d) ((d)->cpu_base.common_base) +#define gic_set_base_accessor(d,f) +#endif + static inline void __iomem *gic_dist_base(struct irq_data *d) { struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); - return gic_data->dist_base; + return gic_data_dist_base(gic_data); } static inline void __iomem *gic_cpu_base(struct irq_data *d) { struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); - return gic_data->cpu_base; + return gic_data_cpu_base(gic_data); } static inline unsigned int gic_irq(struct irq_data *d) @@ -225,7 +282,7 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) chained_irq_enter(chip, desc); raw_spin_lock(&irq_controller_lock); - status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK); + status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK); raw_spin_unlock(&irq_controller_lock); gic_irq = (status & 0x3ff); @@ -270,7 +327,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic) u32 cpumask; unsigned int gic_irqs = gic->gic_irqs; struct irq_domain *domain = &gic->domain; - void __iomem *base = gic->dist_base; + void __iomem *base = gic_data_dist_base(gic); u32 cpu = 0; #ifdef CONFIG_SMP @@ -330,8 +387,8 @@ static void __init gic_dist_init(struct gic_chip_data *gic) static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) { - void __iomem *dist_base = gic->dist_base; - void __iomem *base = gic->cpu_base; + void __iomem *dist_base = gic_data_dist_base(gic); + void __iomem *base = gic_data_cpu_base(gic); int i; /* @@ -368,7 +425,7 @@ static void gic_dist_save(unsigned int gic_nr) BUG(); gic_irqs = gic_data[gic_nr].gic_irqs; - dist_base = gic_data[gic_nr].dist_base; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); if (!dist_base) return; @@ -403,7 +460,7 @@ static void gic_dist_restore(unsigned int gic_nr) BUG(); gic_irqs = gic_data[gic_nr].gic_irqs; - dist_base = gic_data[gic_nr].dist_base; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); if (!dist_base) return; @@ -439,8 +496,8 @@ static void gic_cpu_save(unsigned int gic_nr) if (gic_nr >= MAX_GIC_NR) BUG(); - dist_base = gic_data[gic_nr].dist_base; - cpu_base = gic_data[gic_nr].cpu_base; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); + cpu_base = gic_data_cpu_base(&gic_data[gic_nr]); if (!dist_base || !cpu_base) return; @@ -465,8 +522,8 @@ static void gic_cpu_restore(unsigned int gic_nr) if (gic_nr >= MAX_GIC_NR) BUG(); - dist_base = gic_data[gic_nr].dist_base; - cpu_base = gic_data[gic_nr].cpu_base; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); + cpu_base = gic_data_cpu_base(&gic_data[gic_nr]); if (!dist_base || !cpu_base) return; @@ -491,6 +548,11 @@ static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v) int i; for (i = 0; i < MAX_GIC_NR; i++) { +#ifdef CONFIG_GIC_NON_BANKED + /* Skip over unused GICs */ + if (!gic_data[i].get_base) + continue; +#endif switch (cmd) { case CPU_PM_ENTER: gic_cpu_save(i); @@ -563,8 +625,9 @@ const struct irq_domain_ops gic_irq_domain_ops = { #endif }; -void __init gic_init(unsigned int gic_nr, int irq_start, - void __iomem *dist_base, void __iomem *cpu_base) +void __init gic_init_bases(unsigned int gic_nr, int irq_start, + void __iomem *dist_base, void __iomem *cpu_base, + u32 percpu_offset) { struct gic_chip_data *gic; struct irq_domain *domain; @@ -574,8 +637,36 @@ void __init gic_init(unsigned int gic_nr, int irq_start, gic = &gic_data[gic_nr]; domain = &gic->domain; - gic->dist_base = dist_base; - gic->cpu_base = cpu_base; +#ifdef CONFIG_GIC_NON_BANKED + if (percpu_offset) { /* Frankein-GIC without banked registers... */ + unsigned int cpu; + + gic->dist_base.percpu_base = alloc_percpu(void __iomem *); + gic->cpu_base.percpu_base = alloc_percpu(void __iomem *); + if (WARN_ON(!gic->dist_base.percpu_base || + !gic->cpu_base.percpu_base)) { + free_percpu(gic->dist_base.percpu_base); + free_percpu(gic->cpu_base.percpu_base); + return; + } + + for_each_possible_cpu(cpu) { + unsigned long offset = percpu_offset * cpu_logical_map(cpu); + *per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset; + *per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset; + } + + gic_set_base_accessor(gic, gic_get_percpu_base); + } else +#endif + { /* Normal, sane GIC... */ + WARN(percpu_offset, + "GIC_NON_BANKED not enabled, ignoring %08x offset!", + percpu_offset); + gic->dist_base.common_base = dist_base; + gic->cpu_base.common_base = cpu_base; + gic_set_base_accessor(gic, gic_get_common_base); + } /* * For primary GICs, skip over SGIs. @@ -593,7 +684,7 @@ void __init gic_init(unsigned int gic_nr, int irq_start, * Find out how many interrupts are supported. * The GIC only supports up to 1020 interrupt sources. */ - gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f; + gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f; gic_irqs = (gic_irqs + 1) * 32; if (gic_irqs > 1020) gic_irqs = 1020; @@ -641,7 +732,7 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) dsb(); /* this always happens on GIC0 */ - writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT); + writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT); } #endif @@ -652,6 +743,7 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent) { void __iomem *cpu_base; void __iomem *dist_base; + u32 percpu_offset; int irq; struct irq_domain *domain = &gic_data[gic_cnt].domain; @@ -664,9 +756,12 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent) cpu_base = of_iomap(node, 1); WARN(!cpu_base, "unable to map gic cpu registers\n"); + if (of_property_read_u32(node, "cpu-offset", &percpu_offset)) + percpu_offset = 0; + domain->of_node = of_node_get(node); - gic_init(gic_cnt, -1, dist_base, cpu_base); + gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset); if (parent) { irq = irq_of_parse_and_map(node, 0); -- cgit v1.2.3 From 562e0027d21bf64838178e2f5157df3d5833972e Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Sep 2011 09:56:17 +0100 Subject: ARM: GIC: Add global gic_handle_irq() function Provide the GIC code with a low level handler that can be used by platforms using CONFIG_MULTI_IRQ_HANDLER. Signed-off-by: Marc Zyngier --- arch/arm/common/gic.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/arm/common') diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 43cb6f1a7cf2..3c78b7c60691 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -40,6 +40,7 @@ #include #include +#include #include #include @@ -272,6 +273,32 @@ static int gic_set_wake(struct irq_data *d, unsigned int on) #define gic_set_wake NULL #endif +asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) +{ + u32 irqstat, irqnr; + struct gic_chip_data *gic = &gic_data[0]; + void __iomem *cpu_base = gic_data_cpu_base(gic); + + do { + irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK); + irqnr = irqstat & ~0x1c00; + + if (likely(irqnr > 15 && irqnr < 1021)) { + irqnr = irq_domain_to_irq(&gic->domain, irqnr); + handle_IRQ(irqnr, regs); + continue; + } + if (irqnr < 16) { + writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI); +#ifdef CONFIG_SMP + handle_IPI(irqnr, regs); +#endif + continue; + } + break; + } while (1); +} + static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) { struct gic_chip_data *chip_data = irq_get_handler_data(irq); -- cgit v1.2.3 From 08d33b27f7063ba2b4a29f9e3a2dcb65f30dec0b Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Sep 2011 13:27:10 +0100 Subject: ARM: GIC: Make MULTI_IRQ_HANDLER mandatory Now that MULTI_IRQ_HANDLER is selected by all the in-tree GIC users, make it mandatory and remove the unused macros. Signed-off-by: Marc Zyngier --- arch/arm/common/Kconfig | 1 + arch/arm/common/gic.c | 4 ---- 2 files changed, 1 insertion(+), 4 deletions(-) (limited to 'arch/arm/common') diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index a3beda1213da..a11cee523cd4 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -1,5 +1,6 @@ config ARM_GIC select IRQ_DOMAIN + select MULTI_IRQ_HANDLER bool config GIC_NON_BANKED diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 3c78b7c60691..a1feb6b4f9f5 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -71,9 +71,6 @@ struct gic_chip_data { static DEFINE_RAW_SPINLOCK(irq_controller_lock); -/* Address of GIC 0 CPU interface */ -void __iomem *gic_cpu_base_addr __read_mostly; - /* * Supported arch specific GIC irq extension. * Default make them NULL. @@ -700,7 +697,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, * For secondary GICs, skip over PPIs, too. */ if (gic_nr == 0) { - gic_cpu_base_addr = cpu_base; domain->hwirq_base = 16; if (irq_start > 0) irq_start = (irq_start & ~31) + 16; -- cgit v1.2.3 From f9b28ccbc7139af656147dcbba9c5425d5706b7d Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Tue, 27 Sep 2011 11:00:46 +0100 Subject: ARM: vic: device tree binding This adds a device tree binding for the VIC based on the of_irq_init() support. This adds an irqdomain to the vic and always registers all vics in the static vic array rather than for pm only to keep track of the irq domain. struct irq_data::hwirq is used where appropriate rather than runtime masking. v3: - include linux/export.h for THIS_MODULE v2: - use irq_domain_simple_ops - remove stub implementation of vic_of_init for !CONFIG_OF - Make VIC select IRQ_DOMAIN Reviewed-by: Rob Herring Reviewed-by: Grant Likely Tested-by: Thomas Abraham Signed-off-by: Jamie Iles --- arch/arm/common/Kconfig | 1 + arch/arm/common/vic.c | 107 +++++++++++++++++++++++++++++++++++------------- 2 files changed, 80 insertions(+), 28 deletions(-) (limited to 'arch/arm/common') diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index a11cee523cd4..10ca9749e94d 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -7,6 +7,7 @@ config GIC_NON_BANKED bool config ARM_VIC + select IRQ_DOMAIN bool config ARM_VIC_NR diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 01f18a421b17..a227a7d53700 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -19,9 +19,14 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include #include #include #include +#include +#include +#include +#include #include #include #include @@ -29,7 +34,6 @@ #include #include -#ifdef CONFIG_PM /** * struct vic_device - VIC PM device * @irq: The IRQ number for the base of the VIC. @@ -40,6 +44,7 @@ * @int_enable: Save for VIC_INT_ENABLE. * @soft_int: Save for VIC_INT_SOFT. * @protect: Save for VIC_PROTECT. + * @domain: The IRQ domain for the VIC. */ struct vic_device { void __iomem *base; @@ -50,13 +55,13 @@ struct vic_device { u32 int_enable; u32 soft_int; u32 protect; + struct irq_domain domain; }; /* we cannot allocate memory when VICs are initially registered */ static struct vic_device vic_devices[CONFIG_ARM_VIC_NR]; static int vic_id; -#endif /* CONFIG_PM */ /** * vic_init2 - common initialisation code @@ -156,39 +161,50 @@ static int __init vic_pm_init(void) return 0; } late_initcall(vic_pm_init); +#endif /* CONFIG_PM */ /** - * vic_pm_register - Register a VIC for later power management control + * vic_register() - Register a VIC. * @base: The base address of the VIC. * @irq: The base IRQ for the VIC. * @resume_sources: bitmask of interrupts allowed for resume sources. + * @node: The device tree node associated with the VIC. * * Register the VIC with the system device tree so that it can be notified * of suspend and resume requests and ensure that the correct actions are * taken to re-instate the settings on resume. + * + * This also configures the IRQ domain for the VIC. */ -static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources) +static void __init vic_register(void __iomem *base, unsigned int irq, + u32 resume_sources, struct device_node *node) { struct vic_device *v; - if (vic_id >= ARRAY_SIZE(vic_devices)) + if (vic_id >= ARRAY_SIZE(vic_devices)) { printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__); - else { - v = &vic_devices[vic_id]; - v->base = base; - v->resume_sources = resume_sources; - v->irq = irq; - vic_id++; + return; } + + v = &vic_devices[vic_id]; + v->base = base; + v->resume_sources = resume_sources; + v->irq = irq; + vic_id++; + + v->domain.irq_base = irq; + v->domain.nr_irq = 32; +#ifdef CONFIG_OF_IRQ + v->domain.of_node = of_node_get(node); + v->domain.ops = &irq_domain_simple_ops; +#endif /* CONFIG_OF */ + irq_domain_add(&v->domain); } -#else -static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { } -#endif /* CONFIG_PM */ static void vic_ack_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); - unsigned int irq = d->irq & 31; + unsigned int irq = d->hwirq; writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); /* moreover, clear the soft-triggered, in case it was the reason */ writel(1 << irq, base + VIC_INT_SOFT_CLEAR); @@ -197,14 +213,14 @@ static void vic_ack_irq(struct irq_data *d) static void vic_mask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); - unsigned int irq = d->irq & 31; + unsigned int irq = d->hwirq; writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); } static void vic_unmask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); - unsigned int irq = d->irq & 31; + unsigned int irq = d->hwirq; writel(1 << irq, base + VIC_INT_ENABLE); } @@ -226,7 +242,7 @@ static struct vic_device *vic_from_irq(unsigned int irq) static int vic_set_wake(struct irq_data *d, unsigned int on) { struct vic_device *v = vic_from_irq(d->irq); - unsigned int off = d->irq & 31; + unsigned int off = d->hwirq; u32 bit = 1 << off; if (!v) @@ -330,15 +346,9 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, vic_set_irq_sources(base, irq_start, vic_sources); } -/** - * vic_init - initialise a vectored interrupt controller - * @base: iomem base address - * @irq_start: starting interrupt number, must be muliple of 32 - * @vic_sources: bitmask of interrupt sources to allow - * @resume_sources: bitmask of interrupt sources to allow for resume - */ -void __init vic_init(void __iomem *base, unsigned int irq_start, - u32 vic_sources, u32 resume_sources) +static void __init __vic_init(void __iomem *base, unsigned int irq_start, + u32 vic_sources, u32 resume_sources, + struct device_node *node) { unsigned int i; u32 cellid = 0; @@ -375,5 +385,46 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, vic_set_irq_sources(base, irq_start, vic_sources); - vic_pm_register(base, irq_start, resume_sources); + vic_register(base, irq_start, resume_sources, node); +} + +/** + * vic_init() - initialise a vectored interrupt controller + * @base: iomem base address + * @irq_start: starting interrupt number, must be muliple of 32 + * @vic_sources: bitmask of interrupt sources to allow + * @resume_sources: bitmask of interrupt sources to allow for resume + */ +void __init vic_init(void __iomem *base, unsigned int irq_start, + u32 vic_sources, u32 resume_sources) +{ + __vic_init(base, irq_start, vic_sources, resume_sources, NULL); +} + +#ifdef CONFIG_OF +int __init vic_of_init(struct device_node *node, struct device_node *parent) +{ + void __iomem *regs; + int irq_base; + + if (WARN(parent, "non-root VICs are not supported")) + return -EINVAL; + + regs = of_iomap(node, 0); + if (WARN_ON(!regs)) + return -EIO; + + irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id()); + if (WARN_ON(irq_base < 0)) + goto out_unmap; + + __vic_init(regs, irq_base, ~0, ~0, node); + + return 0; + + out_unmap: + iounmap(regs); + + return -EIO; } +#endif /* CONFIG OF */ -- cgit v1.2.3 From 1558368eb5d67a41d4199db32d3f5858660b44cf Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Wed, 28 Sep 2011 09:40:11 +0100 Subject: ARM: vic: MULTI_IRQ_HANDLER handler Add a handler for the VIC that is suitable for MULTI_IRQ_HANDLER platforms. This can replace the ASM entry macros for platforms that use the VIC. v4: - rebase ontop of move __exception and friends to asm/exception.h - rework polling loop to handle as many irqs as possible in one go v3: - simplify irq handling loop as suggested by Grant - service interrupts from msb->lsb order v2: - allow the handler be used for !CONFIG_OF - use irq_domain_to_irq() Cc: Rob Herring Acked-by: Grant Likely Acked-by: Linus Walleij Tested-by: Thomas Abraham Signed-off-by: Jamie Iles --- arch/arm/common/vic.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'arch/arm/common') diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index a227a7d53700..0a69547e0312 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -31,6 +31,7 @@ #include #include +#include #include #include @@ -428,3 +429,40 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent) return -EIO; } #endif /* CONFIG OF */ + +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Handle each interrupt in a single VIC. Returns non-zero if we've + * handled at least one interrupt. This does a single read of the + * status register and handles all interrupts in order from LSB first. + */ +static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs) +{ + u32 stat, irq; + int handled = 0; + + stat = readl_relaxed(vic->base + VIC_IRQ_STATUS); + while (stat) { + irq = ffs(stat) - 1; + handle_IRQ(irq_domain_to_irq(&vic->domain, irq), regs); + stat &= ~(1 << irq); + handled = 1; + } + + return handled; +} + +/* + * Keep iterating over all registered VIC's until there are no pending + * interrupts. + */ +asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs) +{ + int i, handled; + + do { + for (i = 0, handled = 0; i < vic_id; ++i) + handled |= handle_one_vic(&vic_devices[i], regs); + } while (handled); +} +#endif /* CONFIG_MULTI_IRQ_HANDLER */ -- cgit v1.2.3 From 11f1c5de7be06bbb51363002ebc4d00edc2677df Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Thu, 3 Nov 2011 17:32:39 +0000 Subject: ARM: VIC: remove non MULTI_IRQ_HANDLER support Now that all platforms are converted to MULTI_IRQ_HANDLER, remove the legacy support. Tested-by: Thomas Abraham Signed-off-by: Jamie Iles --- arch/arm/common/Kconfig | 1 + arch/arm/common/vic.c | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm/common') diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 10ca9749e94d..81a933eb0903 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -8,6 +8,7 @@ config GIC_NON_BANKED config ARM_VIC select IRQ_DOMAIN + select MULTI_IRQ_HANDLER bool config ARM_VIC_NR diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 0a69547e0312..6ed41ec2bbf5 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -430,7 +430,6 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent) } #endif /* CONFIG OF */ -#ifdef CONFIG_MULTI_IRQ_HANDLER /* * Handle each interrupt in a single VIC. Returns non-zero if we've * handled at least one interrupt. This does a single read of the @@ -465,4 +464,3 @@ asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs) handled |= handle_one_vic(&vic_devices[i], regs); } while (handled); } -#endif /* CONFIG_MULTI_IRQ_HANDLER */ -- cgit v1.2.3 From ad622671a4da0b6db1c1382e6345e1361c5fbab8 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Thu, 1 Dec 2011 11:16:46 +0100 Subject: ARM: 7183/1: vic: register the VIC for ST-modified VIC's When probing the VIC, the ST variant has a different probing method to account for the extra interrupts which meant we didn't previously call vic_register() which registered the irq_domain. Acked-by: Linus Walleij Cc: Marc Zyngier Signed-off-by: Jamie Iles Signed-off-by: Russell King --- arch/arm/common/vic.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/arm/common') diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 6ed41ec2bbf5..77287504c8b4 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -318,7 +318,7 @@ static void __init vic_set_irq_sources(void __iomem *base, * and 020 within the page. We call this "second block". */ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, - u32 vic_sources) + u32 vic_sources, struct device_node *node) { unsigned int i; int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0; @@ -345,6 +345,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, } vic_set_irq_sources(base, irq_start, vic_sources); + vic_register(base, irq_start, 0, node); } static void __init __vic_init(void __iomem *base, unsigned int irq_start, @@ -367,7 +368,7 @@ static void __init __vic_init(void __iomem *base, unsigned int irq_start, switch(vendor) { case AMBA_VENDOR_ST: - vic_init_st(base, irq_start, vic_sources); + vic_init_st(base, irq_start, vic_sources, node); return; default: printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n"); -- cgit v1.2.3 From 9f9df00accb343f61a5782904af10366a18ebb5a Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Wed, 14 Dec 2011 23:43:17 +0100 Subject: ARM: 7236/1: vic: always use simple ops Now that irq_domain_simple_ops are available for non-DT users, use them in the VIC driver so that we don't get a NULL dereference in irq_domain_to_irq() when registering the domain. Cc: Linus Walleij Signed-off-by: Jamie Iles Signed-off-by: Russell King --- arch/arm/common/vic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/common') diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 77287504c8b4..dcb004a804c7 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -197,8 +197,8 @@ static void __init vic_register(void __iomem *base, unsigned int irq, v->domain.nr_irq = 32; #ifdef CONFIG_OF_IRQ v->domain.of_node = of_node_get(node); - v->domain.ops = &irq_domain_simple_ops; #endif /* CONFIG_OF */ + v->domain.ops = &irq_domain_simple_ops; irq_domain_add(&v->domain); } -- cgit v1.2.3