From 3efee47db7a191443b529740b35240d63ae1ad20 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 23 Aug 2010 07:32:09 -0700 Subject: ARM: mx5/mx51_babbage: Add FEC support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Tested it by booting a rootfs via NFS. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer Signed-off-by: Uwe Kleine-König --- arch/arm/mach-mx5/board-mx51_babbage.c | 43 +++++++++++++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 6e384d92e625..10d2f6bde172 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -35,7 +36,8 @@ #define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */ #define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */ -#define BABBAGE_PHY_RESET (1*32 +5) /* GPIO_2_5 */ +#define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */ +#define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */ /* USB_CTRL_1 */ #define MX51_USB_CTRL_1_OFFSET 0x10 @@ -93,6 +95,28 @@ static struct pad_desc mx51babbage_pads[] = { /* USB HUB reset line*/ MX51_PAD_GPIO_1_7__GPIO_1_7, + + /* FEC */ + MX51_PAD_EIM_EB2__FEC_MDIO, + MX51_PAD_EIM_EB3__FEC_RDAT1, + MX51_PAD_EIM_CS2__FEC_RDAT2, + MX51_PAD_EIM_CS3__FEC_RDAT3, + MX51_PAD_EIM_CS4__FEC_RX_ER, + MX51_PAD_EIM_CS5__FEC_CRS, + MX51_PAD_NANDF_RB2__FEC_COL, + MX51_PAD_NANDF_RB3__FEC_RXCLK, + MX51_PAD_NANDF_RB6__FEC_RDAT0, + MX51_PAD_NANDF_RB7__FEC_TDAT0, + MX51_PAD_NANDF_CS2__FEC_TX_ER, + MX51_PAD_NANDF_CS3__FEC_MDC, + MX51_PAD_NANDF_CS4__FEC_TDAT1, + MX51_PAD_NANDF_CS5__FEC_TDAT2, + MX51_PAD_NANDF_CS6__FEC_TDAT3, + MX51_PAD_NANDF_CS7__FEC_TX_EN, + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, + + /* FEC PHY reset line */ + MX51_PAD_EIM_A20__GPIO_2_14, }; /* Serial ports */ @@ -171,6 +195,22 @@ static inline void babbage_usbhub_reset(void) gpio_set_value(BABBAGE_USB_HUB_RESET, 1); } +static inline void babbage_fec_reset(void) +{ + int ret; + + /* reset FEC PHY */ + ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset"); + if (ret) { + printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); + return; + } + gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0); + gpio_set_value(BABBAGE_FEC_PHY_RESET, 0); + msleep(1); + gpio_set_value(BABBAGE_FEC_PHY_RESET, 1); +} + /* This function is board specific as the bit mask for the plldiv will also be different for other Freescale SoCs, thus a common bitmask is not possible and cannot get place in /plat-mxc/ehci.c.*/ @@ -250,6 +290,7 @@ static void __init mxc_board_init(void) mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, ARRAY_SIZE(mx51babbage_pads)); mxc_init_imx_uart(); + babbage_fec_reset(); platform_add_devices(devices, ARRAY_SIZE(devices)); mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data); -- cgit v1.2.3 From e7a895bf64e9360499d04b80fa33b0ad93546d44 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 19 Aug 2010 11:37:31 +0200 Subject: ARM: mx5/mx51_babbage: fix compiler warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Sascha Hauer Signed-off-by: Uwe Kleine-König --- arch/arm/mach-mx5/board-mx51_babbage.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 10d2f6bde172..3ef1214cb0d4 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -218,7 +218,7 @@ static int initialize_otg_port(struct platform_device *pdev) { u32 v; void __iomem *usb_base; - u32 usbother_base; + void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; @@ -236,7 +236,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) { u32 v; void __iomem *usb_base; - u32 usbother_base; + void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; -- cgit v1.2.3 From e16ddb3ad2b42d7c906748dc3bc3f393ddb94c67 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 24 Aug 2010 12:33:23 +0200 Subject: ARM: mx5/mx51_babbage: don't use PHYS_OFFSET MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König --- arch/arm/mach-mx5/board-mx51_babbage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 3ef1214cb0d4..caa8f680649e 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -324,7 +324,7 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") /* Maintainer: Amit Kucheria */ .phys_io = MX51_AIPS1_BASE_ADDR, .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, .init_irq = mx51_init_irq, .init_machine = mxc_board_init, -- cgit v1.2.3 From 44505c0768971f4aa94ca09c8155448a46a7ff8a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 30 Sep 2010 16:44:53 +0200 Subject: ARM: mx5: dynamically register imx-i2c devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 2 ++ arch/arm/mach-mx5/board-cpuimx51.c | 6 +++--- arch/arm/mach-mx5/board-mx51_babbage.c | 7 +++---- arch/arm/mach-mx5/devices-imx51.h | 14 +++++++++++++ arch/arm/mach-mx5/devices.c | 38 ---------------------------------- arch/arm/mach-mx5/devices.h | 2 -- 6 files changed, 22 insertions(+), 47 deletions(-) create mode 100644 arch/arm/mach-mx5/devices-imx51.h (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 0848db5dd364..e57caefb1f28 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -10,6 +10,7 @@ comment "MX5 platforms:" config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" + select IMX_HAVE_PLATFORM_IMX_I2C help Include support for MX51 Babbage platform, also known as MX51EVK in u-boot. This includes specific configurations for the board and its @@ -24,6 +25,7 @@ config MACH_MX51_3DS config MACH_EUKREA_CPUIMX51 bool "Support Eukrea CPUIMX51 module" + select IMX_HAVE_PLATFORM_IMX_I2C help Include support for Eukrea CPUIMX51 platform. This includes specific configurations for the module and its peripherals. diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 623607a20f57..d52f2527f6bf 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include @@ -152,7 +151,8 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct imxi2c_platform_data eukrea_cpuimx51_i2c_data = { +static const +struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = { .bitrate = 100000, }; @@ -255,7 +255,7 @@ static void __init eukrea_cpuimx51_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_i2c_device1, &eukrea_cpuimx51_i2c_data); + imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data); i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices, ARRAY_SIZE(eukrea_cpuimx51_i2c_devices)); diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index caa8f680649e..3f3075d7768f 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include @@ -137,7 +136,7 @@ static inline void mxc_init_imx_uart(void) } #endif /* SERIAL_IMX */ -static struct imxi2c_platform_data babbage_i2c_data = { +static const struct imxi2c_platform_data babbage_i2c_data __initconst = { .bitrate = 100000, }; @@ -293,8 +292,8 @@ static void __init mxc_board_init(void) babbage_fec_reset(); platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data); - mxc_register_device(&mxc_i2c_device1, &babbage_i2c_data); + imx51_add_imx_i2c(0, &babbage_i2c_data); + imx51_add_imx_i2c(1, &babbage_i2c_data); mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data); if (otg_mode_host) diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h new file mode 100644 index 000000000000..a3cc3834c9fe --- /dev/null +++ b/arch/arm/mach-mx5/devices-imx51.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include +#include + +extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst; +#define imx51_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata) diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index 1920ff4963b2..70b76d16391c 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -93,44 +93,6 @@ struct platform_device mxc_fec_device = { .resource = mxc_fec_resources, }; -static struct resource mxc_i2c0_resources[] = { - { - .start = MX51_I2C1_BASE_ADDR, - .end = MX51_I2C1_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_I2C1, - .end = MX51_MXC_INT_I2C1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device0 = { - .name = "imx-i2c", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_i2c0_resources), - .resource = mxc_i2c0_resources, -}; - -static struct resource mxc_i2c1_resources[] = { - { - .start = MX51_I2C2_BASE_ADDR, - .end = MX51_I2C2_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_I2C2, - .end = MX51_MXC_INT_I2C2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device1 = { - .name = "imx-i2c", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_i2c1_resources), - .resource = mxc_i2c1_resources, -}; - static struct resource mxc_hsi2c_resources[] = { { .start = MX51_HSI2C_DMA_BASE_ADDR, diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h index e509cfaad1d4..5c2918fcec0d 100644 --- a/arch/arm/mach-mx5/devices.h +++ b/arch/arm/mach-mx5/devices.h @@ -6,7 +6,5 @@ extern struct platform_device mxc_usbdr_host_device; extern struct platform_device mxc_usbh1_device; extern struct platform_device mxc_usbdr_udc_device; extern struct platform_device mxc_wdt; -extern struct platform_device mxc_i2c_device0; -extern struct platform_device mxc_i2c_device1; extern struct platform_device mxc_hsi2c_device; extern struct platform_device mxc_keypad_device; -- cgit v1.2.3 From 9f0c11ee67d9a5ab76c27d2f9dbdd9ee85fbce10 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 10 Sep 2010 16:57:07 +0200 Subject: ARM: mx5: add spi_imx device registration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Acked-by: Jason Wang Acked-by: Grant Likely Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/devices-imx51.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h index a3cc3834c9fe..09d2b5c8b4f5 100644 --- a/arch/arm/mach-mx5/devices-imx51.h +++ b/arch/arm/mach-mx5/devices-imx51.h @@ -12,3 +12,11 @@ extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst; #define imx51_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata) + +extern const struct imx_spi_imx_data imx51_cspi_data __initconst; +#define imx51_add_cspi(pdata) \ + imx_add_spi_imx(&imx51_cspi_data, pdata) + +extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst; +#define imx51_add_ecspi(id, pdata) \ + imx_add_spi_imx(&imx51_ecspi_data[id], pdata) -- cgit v1.2.3 From 79901478e0a2854c4becbb2e77f176bd7fa37caa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 10 Sep 2010 16:58:42 +0200 Subject: ARM: mx5/clock-mx51: refactor ccgr callbacks to use common code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Acked-by: Jason Wang Acked-by: Grant Likely Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 57c10a9926cc..fe658bf5b490 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -41,34 +41,36 @@ static struct clk usboh3_clk; #define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */ -static int _clk_ccgr_enable(struct clk *clk) +static void _clk_ccgr_setclk(struct clk *clk, unsigned mode) { - u32 reg; + u32 reg = __raw_readl(clk->enable_reg); + + reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); + reg |= mode << clk->enable_shift; - reg = __raw_readl(clk->enable_reg); - reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift; __raw_writel(reg, clk->enable_reg); +} +static int _clk_ccgr_enable(struct clk *clk) +{ + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON); return 0; } static void _clk_ccgr_disable(struct clk *clk) { - u32 reg; - reg = __raw_readl(clk->enable_reg); - reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF); +} +static int _clk_ccgr_enable_inrun(struct clk *clk) +{ + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE); + return 0; } static void _clk_ccgr_disable_inwait(struct clk *clk) { - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); - reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE); } /* -- cgit v1.2.3 From 74d99f395901502747a44a1379f3b4fdb638dafa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 10 Sep 2010 17:01:26 +0200 Subject: ARM: mx5/clock-mx51: new macro that defines a clk with all members MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Acked-by: Jason Wang Acked-by: Grant Likely Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index fe658bf5b490..0e396981c27c 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -764,21 +764,21 @@ static struct clk kpp_clk = { .id = 0, }; -#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \ - static struct clk name = { \ - .id = i, \ - .enable_reg = er, \ - .enable_shift = es, \ - .get_rate = gr, \ - .set_rate = sr, \ - .enable = _clk_ccgr_enable, \ - .disable = _clk_ccgr_disable, \ - .parent = p, \ - .secondary = s, \ +#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = er, \ + .enable_shift = es, \ + .get_rate = gr, \ + .set_rate = sr, \ + .enable = e, \ + .disable = d, \ + .parent = p, \ + .secondary = s, \ } -/* DEFINE_CLOCK(name, id, enable_reg, enable_shift, - get_rate, set_rate, parent, secondary); */ +#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \ + DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s) /* Shared peripheral bus arbiter */ DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET, -- cgit v1.2.3 From 8d83db81affd71af0fb6f054ab552d16a7cb805b Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Thu, 2 Sep 2010 15:52:00 +0800 Subject: ARM: mx5/clock-mx51: add spi clocks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jason Wang Acked-by: Grant Likely Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51.c | 57 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 0e396981c27c..68aef2d58484 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -764,6 +764,42 @@ static struct clk kpp_clk = { .id = 0, }; +/* eCSPI */ +static unsigned long clk_ecspi_get_rate(struct clk *clk) +{ + u32 reg, pred, podf; + + reg = __raw_readl(MXC_CCM_CSCDR2); + + pred = (reg & MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK) >> + MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET; + podf = (reg & MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK) >> + MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET; + + return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), + (pred + 1) * (podf + 1)); +} + +static int clk_ecspi_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, + &lp_apm_clk); + + reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK; + reg |= mux << MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static struct clk ecspi_main_clk = { + .parent = &pll3_sw_clk, + .get_rate = clk_ecspi_get_rate, + .set_parent = clk_ecspi_set_parent, +}; + #define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \ static struct clk name = { \ .id = i, \ @@ -816,6 +852,24 @@ DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET, DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET, NULL, NULL, &ipg_clk, NULL); +/* eCSPI */ +DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable, + &ipg_clk, &spba_clk); +DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET, + NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk); +DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET, + NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable, + &ipg_clk, &aips_tz2_clk); +DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET, + NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk); + +/* CSPI */ +DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &ipg_clk, &aips_tz2_clk); +DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET, + NULL, NULL, &ipg_clk, &cspi_ipg_clk); + #define _REGISTER_CLOCK(d, n, c) \ { \ .dev_id = d, \ @@ -839,6 +893,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk) _REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk) + _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) + _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) + _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk) }; static void clk_tree_init(void) -- cgit v1.2.3 From 988916e1a9af1994d510138e7201acf7b425fb46 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Thu, 2 Sep 2010 15:52:03 +0800 Subject: ARM: mx5/mx51_3ds: add eCSPI2 support on the imx51_3ds board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jason Wang Acked-by: Grant Likely Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx51_3ds.c | 20 ++++++++++++++++++++ 2 files changed, 21 insertions(+) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index e57caefb1f28..2735314a78e0 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -18,6 +18,7 @@ config MACH_MX51_BABBAGE config MACH_MX51_3DS bool "Support MX51PDK (3DS)" + select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD help Include support for MX51PDK (3DS) platform. This includes specific diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index f95c2fd94667..c9c41282c996 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -24,9 +24,11 @@ #include #include +#include "devices-imx51.h" #include "devices.h" #define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 6) +#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28) static struct pad_desc mx51_3ds_pads[] = { /* UART1 */ @@ -61,6 +63,12 @@ static struct pad_desc mx51_3ds_pads[] = { MX51_PAD_KEY_COL3__KEY_COL3, MX51_PAD_KEY_COL4__KEY_COL4, MX51_PAD_KEY_COL5__KEY_COL5, + + /* eCSPI2 */ + MX51_PAD_NANDF_RB2__ECSPI2_SCLK, + MX51_PAD_NANDF_RB3__ECSPI2_MISO, + MX51_PAD_NANDF_D15__ECSPI2_MOSI, + MX51_PAD_NANDF_D12__GPIO_3_28, }; /* Serial ports */ @@ -127,6 +135,16 @@ static inline void mxc_init_keypad(void) } #endif +static int mx51_3ds_spi2_cs[] = { + MXC_SPI_CS(0), + MX51_3DS_ECSPI2_CS, +}; + +static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = { + .chipselect = mx51_3ds_spi2_cs, + .num_chipselect = ARRAY_SIZE(mx51_3ds_spi2_cs), +}; + /* * Board specific initialization. */ @@ -136,6 +154,8 @@ static void __init mxc_board_init(void) ARRAY_SIZE(mx51_3ds_pads)); mxc_init_imx_uart(); + imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata); + if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT)) printk(KERN_WARNING "Init of the debugboard failed, all " "devices on the board are unusable.\n"); -- cgit v1.2.3 From 8005cf2eb39786a0a3592fe178603ee1caccc5eb Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Thu, 2 Sep 2010 15:52:04 +0800 Subject: ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A 2M bytes SPI NOR flash(sst25vf016b) is soldered on the mx51_3ds board. So add the corresponding device for it. Signed-off-by: Jason Wang Acked-by: Grant Likely Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx51_3ds.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index c9c41282c996..b9d3331ba308 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -145,6 +146,16 @@ static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = { .num_chipselect = ARRAY_SIZE(mx51_3ds_spi2_cs), }; +static struct spi_board_info mx51_3ds_spi_nor_device[] = { + { + .modalias = "m25p80", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 1, + .mode = SPI_MODE_0, + .platform_data = NULL,}, +}; + /* * Board specific initialization. */ @@ -155,6 +166,8 @@ static void __init mxc_board_init(void) mxc_init_imx_uart(); imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata); + spi_register_board_info(mx51_3ds_spi_nor_device, + ARRAY_SIZE(mx51_3ds_spi_nor_device)); if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT)) printk(KERN_WARNING "Init of the debugboard failed, all " -- cgit v1.2.3 From 2b82e64d787f9d1a5d304da137c2b1bdbe3b2d9d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 3 Aug 2010 11:59:07 +0200 Subject: ARM: mx5: Add Nand clock support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51.c | 98 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 98 insertions(+) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 68aef2d58484..0cef8c4f84ba 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -573,6 +573,64 @@ static int _clk_uart_set_parent(struct clk *clk, struct clk *parent) return 0; } +#define clk_nfc_set_parent NULL + +static unsigned long clk_nfc_get_rate(struct clk *clk) +{ + unsigned long rate; + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >> + MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1; + rate = clk_get_rate(clk->parent) / div; + WARN_ON(rate == 0); + return rate; +} + +static unsigned long clk_nfc_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div; + unsigned long parent_rate = clk_get_rate(clk->parent); + + if (!rate) + return -EINVAL; + + div = parent_rate / rate; + + if (parent_rate % rate) + div++; + + if (div > 8) + return -EINVAL; + + return parent_rate / div; + +} + +static int clk_nfc_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div; + + div = clk_get_rate(clk->parent) / rate; + if (div == 0) + div++; + if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8)) + return -EINVAL; + + reg = __raw_readl(MXC_CCM_CBCDR); + reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK; + reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_CBCDR); + + while (__raw_readl(MXC_CCM_CDHIPR) & + MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){ + } + + return 0; +} + static unsigned long clk_usboh3_get_rate(struct clk *clk) { u32 reg, prediv, podf; @@ -622,6 +680,17 @@ static unsigned long get_ckih2_reference_clock_rate(struct clk *clk) return ckih2_reference; } +static unsigned long clk_emi_slow_get_rate(struct clk *clk) +{ + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >> + MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1; + + return clk_get_rate(clk->parent) / div; +} + /* External high frequency clock */ static struct clk ckih_clk = { .get_rate = get_high_reference_clock_rate, @@ -764,6 +833,30 @@ static struct clk kpp_clk = { .id = 0, }; +static struct clk emi_slow_clk = { + .parent = &pll2_sw_clk, + .enable_reg = MXC_CCM_CCGR5, + .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET, + .enable = _clk_ccgr_enable, + .disable = _clk_ccgr_disable_inwait, + .get_rate = clk_emi_slow_get_rate, +}; + +#define DEFINE_CLOCK1(name, i, er, es, pfx, p, s) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = er, \ + .enable_shift = es, \ + .get_rate = pfx##_get_rate, \ + .set_rate = pfx##_set_rate, \ + .round_rate = pfx##_round_rate, \ + .set_parent = pfx##_set_parent, \ + .enable = _clk_ccgr_enable, \ + .disable = _clk_ccgr_disable, \ + .parent = p, \ + .secondary = s, \ + } + /* eCSPI */ static unsigned long clk_ecspi_get_rate(struct clk *clk) { @@ -852,6 +945,10 @@ DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET, DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET, NULL, NULL, &ipg_clk, NULL); +/* NFC */ +DEFINE_CLOCK1(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET, + clk_nfc, &emi_slow_clk, NULL); + /* eCSPI */ DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET, NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable, @@ -893,6 +990,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk) _REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk) + _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk) _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk) -- cgit v1.2.3 From 04b73b1571c26d491c62c42cb06b96bf482fa7a2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 11 Aug 2010 22:23:06 +0200 Subject: ARM: mx51: dynamically register imx-uart devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 3 ++ arch/arm/mach-mx5/board-cpuimx51.c | 6 +-- arch/arm/mach-mx5/board-mx51_3ds.c | 9 ++--- arch/arm/mach-mx5/board-mx51_babbage.c | 10 ++--- arch/arm/mach-mx5/devices-imx51.h | 4 ++ arch/arm/mach-mx5/devices.c | 57 ---------------------------- arch/arm/mach-mx5/devices.h | 3 -- arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c | 7 ++-- 8 files changed, 23 insertions(+), 76 deletions(-) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 2735314a78e0..65bf34e1a4f6 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -11,6 +11,7 @@ comment "MX5 platforms:" config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART help Include support for MX51 Babbage platform, also known as MX51EVK in u-boot. This includes specific configurations for the board and its @@ -18,6 +19,7 @@ config MACH_MX51_BABBAGE config MACH_MX51_3DS bool "Support MX51PDK (3DS)" + select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD help @@ -27,6 +29,7 @@ config MACH_MX51_3DS config MACH_EUKREA_CPUIMX51 bool "Support Eukrea CPUIMX51 module" select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART help Include support for Eukrea CPUIMX51 platform. This includes specific configurations for the module and its peripherals. diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index d52f2527f6bf..a6c09c7ff728 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include @@ -38,6 +37,7 @@ #include #include +#include "devices-imx51.h" #include "devices.h" #define CPUIMX51_USBH1_STP (0*32 + 27) @@ -147,7 +147,7 @@ static struct pad_desc eukrea_cpuimx51_pads[] = { MX51_PAD_USBH1_STP__USBH1_STP, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -239,7 +239,7 @@ static void __init eukrea_cpuimx51_init(void) mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, ARRAY_SIZE(eukrea_cpuimx51_pads)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx51_add_imx_uart(0, &uart_pdata); gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq"); gpio_direction_input(CPUIMX51_QUARTA_GPIO); gpio_free(CPUIMX51_QUARTA_GPIO); diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index b9d3331ba308..ed08a2352a1a 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include "devices-imx51.h" @@ -74,15 +73,15 @@ static struct pad_desc mx51_3ds_pads[] = { /* Serial ports */ #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static inline void mxc_init_imx_uart(void) { - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); } #else /* !SERIAL_IMX */ static inline void mxc_init_imx_uart(void) diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 3f3075d7768f..7c0b6618a164 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -21,7 +21,6 @@ #include #include -#include #include #include @@ -31,6 +30,7 @@ #include #include +#include "devices-imx51.h" #include "devices.h" #define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */ @@ -120,15 +120,15 @@ static struct pad_desc mx51babbage_pads[] = { /* Serial ports */ #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static inline void mxc_init_imx_uart(void) { - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); } #else /* !SERIAL_IMX */ static inline void mxc_init_imx_uart(void) diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h index 09d2b5c8b4f5..8235b8c6729b 100644 --- a/arch/arm/mach-mx5/devices-imx51.h +++ b/arch/arm/mach-mx5/devices-imx51.h @@ -13,6 +13,10 @@ extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst; #define imx51_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata) +extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst; +#define imx51_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata) + extern const struct imx_spi_imx_data imx51_cspi_data __initconst; #define imx51_add_cspi(pdata) \ imx_add_spi_imx(&imx51_cspi_data, pdata) diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index 70b76d16391c..5f40082d9e61 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -17,63 +17,6 @@ #include #include -static struct resource uart0[] = { - { - .start = MX51_UART1_BASE_ADDR, - .end = MX51_UART1_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_UART1, - .end = MX51_MXC_INT_UART1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device0 = { - .name = "imx-uart", - .id = 0, - .resource = uart0, - .num_resources = ARRAY_SIZE(uart0), -}; - -static struct resource uart1[] = { - { - .start = MX51_UART2_BASE_ADDR, - .end = MX51_UART2_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_UART2, - .end = MX51_MXC_INT_UART2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device1 = { - .name = "imx-uart", - .id = 1, - .resource = uart1, - .num_resources = ARRAY_SIZE(uart1), -}; - -static struct resource uart2[] = { - { - .start = MX51_UART3_BASE_ADDR, - .end = MX51_UART3_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_UART3, - .end = MX51_MXC_INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device2 = { - .name = "imx-uart", - .id = 2, - .resource = uart2, - .num_resources = ARRAY_SIZE(uart2), -}; - static struct resource mxc_fec_resources[] = { { .start = MX51_MXC_FEC_BASE_ADDR, diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h index 5c2918fcec0d..67a6d6910530 100644 --- a/arch/arm/mach-mx5/devices.h +++ b/arch/arm/mach-mx5/devices.h @@ -1,6 +1,3 @@ -extern struct platform_device mxc_uart_device0; -extern struct platform_device mxc_uart_device1; -extern struct platform_device mxc_uart_device2; extern struct platform_device mxc_fec_device; extern struct platform_device mxc_usbdr_host_device; extern struct platform_device mxc_usbh1_device; diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c index ffa93d1d6ef8..d0e417ce2c08 100644 --- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c +++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c @@ -30,6 +30,7 @@ #include +#include "devices-imx51.h" #include "devices.h" #define MBIMX51_TSC2007_GPIO (2*32 + 30) @@ -114,7 +115,7 @@ static struct pad_desc mbimx51_pads[] = { MX51_PAD_KEY_COL3__KEY_COL3, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -172,8 +173,8 @@ void __init eukrea_mbimx51_baseboard_init(void) mxc_iomux_v3_setup_multiple_pads(mbimx51_pads, ARRAY_SIZE(mbimx51_pads)); - mxc_register_device(&mxc_uart_device1, NULL); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx51_add_imx_uart(1, NULL); + imx51_add_imx_uart(2, &uart_pdata); gpio_request(MBIMX51_LED0, "LED0"); gpio_direction_output(MBIMX51_LED0, 1); -- cgit v1.2.3 From b86186610f639344a7db54da89267f645afc30ec Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 20 Aug 2010 16:43:54 +0200 Subject: ARM: mx51: add imx-ssi devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51.c | 12 ++++++++++++ arch/arm/mach-mx5/devices-imx51.h | 4 ++++ 2 files changed, 16 insertions(+) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 0cef8c4f84ba..5c7901180c8e 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -949,6 +949,16 @@ DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET, DEFINE_CLOCK1(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET, clk_nfc, &emi_slow_clk, NULL); +/* SSI */ +DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET, + NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk); +DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET, + NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET, + NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk); + /* eCSPI */ DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET, NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable, @@ -991,6 +1001,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk) _REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk) _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk) + _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) + _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk) diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h index 8235b8c6729b..782b45bd916b 100644 --- a/arch/arm/mach-mx5/devices-imx51.h +++ b/arch/arm/mach-mx5/devices-imx51.h @@ -13,6 +13,10 @@ extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst; #define imx51_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata) +extern const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst; +#define imx51_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata) + extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst; #define imx51_add_imx_uart(id, pdata) \ imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata) -- cgit v1.2.3 From 40e2eda92178f58fd7da2866d3f346dcd2baafed Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 20 Aug 2010 16:44:34 +0200 Subject: ARM: mx51: Add audmux support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 65bf34e1a4f6..3a4c3b32a6e7 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -5,6 +5,7 @@ config ARCH_MX51 default y select MXC_TZIC select ARCH_MXC_IOMUX_V3 + select ARCH_MXC_AUDMUX_V2 comment "MX5 platforms:" -- cgit v1.2.3 From 63a7c6d7507ed6f4ea24a8ed008efa1bb22a2a97 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 3 Aug 2010 11:59:46 +0200 Subject: ARM: mx5: dynamically register mxc-nand device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/devices-imx51.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h index 782b45bd916b..41d93c3d7d0b 100644 --- a/arch/arm/mach-mx5/devices-imx51.h +++ b/arch/arm/mach-mx5/devices-imx51.h @@ -21,6 +21,10 @@ extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst; #define imx51_add_imx_uart(id, pdata) \ imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata) +extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst; +#define imx51_add_mxc_nand(pdata) \ + imx_add_mxc_nand(&imx51_mxc_nand_data, pdata) + extern const struct imx_spi_imx_data imx51_cspi_data __initconst; #define imx51_add_cspi(pdata) \ imx_add_spi_imx(&imx51_cspi_data, pdata) -- cgit v1.2.3 From 8f6e900a661881f9585d9b3a7173a44020c3c0b2 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 25 Aug 2010 11:56:26 +0200 Subject: ARM: mx5: clock-imx51: make *ipg clocks secondary clocks of their corresponding peripheral clocks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the uarts and timer only work because they are turned on by reset default. Make them secondary clocks of their corresponding peripheral clocks to make sure they are turned on when necessary. Also, register some clocks to get rid of compiler warnings Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 5c7901180c8e..e6c17d78189c 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -914,24 +914,24 @@ DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET, NULL, NULL, &ipg_clk, NULL); /* UART */ -DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET, - NULL, NULL, &uart_root_clk, NULL); -DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET, - NULL, NULL, &uart_root_clk, NULL); -DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET, - NULL, NULL, &uart_root_clk, NULL); DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &ipg_clk, &aips_tz1_clk); DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, &ipg_clk, &aips_tz1_clk); DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET, NULL, NULL, &ipg_clk, &spba_clk); +DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET, + NULL, NULL, &uart_root_clk, &uart1_ipg_clk); +DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET, + NULL, NULL, &uart_root_clk, &uart2_ipg_clk); +DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET, + NULL, NULL, &uart_root_clk, &uart3_ipg_clk); /* GPT */ -DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, - NULL, NULL, &ipg_clk, NULL); DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET, NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &ipg_clk, &gpt_ipg_clk); /* I2C */ DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET, @@ -1003,6 +1003,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK(NULL, "ckih", ckih_clk) + _REGISTER_CLOCK(NULL, "ckih2", ckih2_clk) + _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk) _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk) -- cgit v1.2.3 From 8a8d20600dce01553c8505b7c576f8d4307e4ba8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 8 Oct 2010 16:00:11 +0200 Subject: ARM: imx: fix/define clocks and create devices for imx dma MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index e6c17d78189c..21cecc040172 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -977,6 +977,10 @@ DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET, DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET, NULL, NULL, &ipg_clk, &cspi_ipg_clk); +/* SDMA */ +DEFINE_CLOCK(sdma_clk, 1, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG15_OFFSET, + NULL, NULL, &ahb_clk, NULL); + #define _REGISTER_CLOCK(d, n, c) \ { \ .dev_id = d, \ @@ -1003,6 +1007,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) _REGISTER_CLOCK(NULL, "ckih", ckih_clk) _REGISTER_CLOCK(NULL, "ckih2", ckih2_clk) _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk) -- cgit v1.2.3 From 6bd96f3c332d422c0dda302f1b32c8e21dd75ee3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 6 Oct 2010 12:00:18 +0200 Subject: ARM: imx: dynamically register fec devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-cpuimx51.c | 2 +- arch/arm/mach-mx5/board-mx51_babbage.c | 6 +----- arch/arm/mach-mx5/devices-imx51.h | 4 ++++ arch/arm/mach-mx5/devices.c | 19 ------------------- arch/arm/mach-mx5/devices.h | 1 - 5 files changed, 6 insertions(+), 26 deletions(-) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index a6c09c7ff728..61f051043bbc 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -108,7 +108,6 @@ static struct platform_device serial_device = { #endif static struct platform_device *devices[] __initdata = { - &mxc_fec_device, #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) &serial_device, #endif @@ -253,6 +252,7 @@ static void __init eukrea_cpuimx51_init(void) gpio_direction_input(CPUIMX51_QUARTD_GPIO); gpio_free(CPUIMX51_QUARTD_GPIO); + imx51_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data); diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 7c0b6618a164..23ee4a447406 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -46,10 +46,6 @@ #define MX51_USB_PLL_DIV_19_2_MHZ 0x01 #define MX51_USB_PLL_DIV_24_MHZ 0x02 -static struct platform_device *devices[] __initdata = { - &mxc_fec_device, -}; - static struct pad_desc mx51babbage_pads[] = { /* UART1 */ MX51_PAD_UART1_RXD__UART1_RXD, @@ -290,7 +286,7 @@ static void __init mxc_board_init(void) ARRAY_SIZE(mx51babbage_pads)); mxc_init_imx_uart(); babbage_fec_reset(); - platform_add_devices(devices, ARRAY_SIZE(devices)); + imx51_add_fec(NULL); imx51_add_imx_i2c(0, &babbage_i2c_data); imx51_add_imx_i2c(1, &babbage_i2c_data); diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h index 41d93c3d7d0b..c233379256b8 100644 --- a/arch/arm/mach-mx5/devices-imx51.h +++ b/arch/arm/mach-mx5/devices-imx51.h @@ -9,6 +9,10 @@ #include #include +extern const struct imx_fec_data imx51_fec_data __initconst; +#define imx51_add_fec(pdata) \ + imx_add_fec(&imx51_fec_data, pdata) + extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst; #define imx51_add_imx_i2c(id, pdata) \ imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata) diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index 5f40082d9e61..4c7be87a7c9d 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -17,25 +17,6 @@ #include #include -static struct resource mxc_fec_resources[] = { - { - .start = MX51_MXC_FEC_BASE_ADDR, - .end = MX51_MXC_FEC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_FEC, - .end = MX51_MXC_INT_FEC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_fec_device = { - .name = "fec", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_fec_resources), - .resource = mxc_fec_resources, -}; - static struct resource mxc_hsi2c_resources[] = { { .start = MX51_HSI2C_DMA_BASE_ADDR, diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h index 67a6d6910530..af1d07c0bbc1 100644 --- a/arch/arm/mach-mx5/devices.h +++ b/arch/arm/mach-mx5/devices.h @@ -1,4 +1,3 @@ -extern struct platform_device mxc_fec_device; extern struct platform_device mxc_usbdr_host_device; extern struct platform_device mxc_usbh1_device; extern struct platform_device mxc_usbdr_udc_device; -- cgit v1.2.3 From 088d01b00e335230bc51be6ae396babb9767e9ea Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Thu, 7 Oct 2010 03:58:12 +0300 Subject: mx51: add support for genesi efikamx nettop Get serial port working for now Signed-off-by: Amit Kucheria Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 7 +++ arch/arm/mach-mx5/Makefile | 1 + arch/arm/mach-mx5/board-mx51_efikamx.c | 91 ++++++++++++++++++++++++++++++++++ 3 files changed, 99 insertions(+) create mode 100644 arch/arm/mach-mx5/board-mx51_efikamx.c (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 3a4c3b32a6e7..fad31cc5004b 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -49,4 +49,11 @@ config MACH_EUKREA_MBIMX51_BASEBOARD endchoice +config MACH_MX51_EFIKAMX + bool "Support MX51 Genesi Efika MX nettop" + select IMX_HAVE_PLATFORM_IMX_UART + help + Include support for Genesi Efika MX nettop. This includes specific + configurations for the board and its peripherals. + endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index 86c66e7f52f3..d1aac9c3d33c 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o +obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c new file mode 100644 index 000000000000..4c921fc31816 --- /dev/null +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2010 Linaro Limited + * + * based on code from the following + * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. + * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "devices-imx51.h" +#include "devices.h" + +static struct pad_desc mx51efikamx_pads[] = { + /* UART1 */ + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, +}; + +/* Serial ports */ +#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) +static const struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static inline void mxc_init_imx_uart(void) +{ + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); +} +#else /* !SERIAL_IMX */ +static inline void mxc_init_imx_uart(void) +{ +} +#endif /* SERIAL_IMX */ + +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, + ARRAY_SIZE(mx51efikamx_pads)); + mxc_init_imx_uart(); +} + +static void __init mx51_efikamx_timer_init(void) +{ + mx51_clocks_init(32768, 24000000, 22579200, 24576000); +} + +static struct sys_timer mxc_timer = { + .init = mx51_efikamx_timer_init, +}; + +MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") + /* Maintainer: Amit Kucheria */ + .phys_io = MX51_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX51_PHYS_OFFSET + 0x100, + .map_io = mx51_map_io, + .init_irq = mx51_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END -- cgit v1.2.3 From 81490fcdf406f42fff9d9f57d541788f90242885 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Thu, 7 Oct 2010 03:58:25 +0300 Subject: mx51: efikamx: add otg support Ethernet hangs off OTG Signed-off-by: Amit Kucheria Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx51_efikamx.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch/arm/mach-mx5') diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index 4c921fc31816..b00502acdc15 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -37,6 +37,8 @@ #include "devices-imx51.h" #include "devices.h" +#define MX51_USB_PLL_DIV_24_MHZ 0x01 + static struct pad_desc mx51efikamx_pads[] = { /* UART1 */ MX51_PAD_UART1_RXD__UART1_RXD, @@ -63,10 +65,38 @@ static inline void mxc_init_imx_uart(void) } #endif /* SERIAL_IMX */ +/* This function is board specific as the bit mask for the plldiv will also + * be different for other Freescale SoCs, thus a common bitmask is not + * possible and cannot get place in /plat-mxc/ehci.c. + */ +static int initialize_otg_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + void __iomem *usbother_base; + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); + + /* Set the PHY clock to 19.2MHz */ + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; + v |= MX51_USB_PLL_DIV_24_MHZ; + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + iounmap(usb_base); + return 0; +} + +static struct mxc_usbh_platform_data dr_utmi_config = { + .init = initialize_otg_port, + .portsc = MXC_EHCI_UTMI_16BIT, + .flags = MXC_EHCI_INTERNAL_PHY, +}; + static void __init mxc_board_init(void) { mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, ARRAY_SIZE(mx51efikamx_pads)); + mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); mxc_init_imx_uart(); } -- cgit v1.2.3