From 1b47ca1a127925acd73381edb8d1d462014bff1f Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Sun, 19 Aug 2012 18:29:45 +0530 Subject: ARM: OMAP2+: gpmc: remove cs# in sync clk div calc Divider value for a certain sync clk is determined solely based on gpmc fclk. CS# does not have any role here, thus remove presence of CS# in clock divider calculation API. Signed-off-by: Afzal Mohammed Reviewed-by: Jon Hunter --- arch/arm/plat-omap/include/plat/gpmc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 2e6e2597178c..f7e0990eaf37 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -160,7 +160,7 @@ extern unsigned long gpmc_get_fclk_period(void); extern void gpmc_cs_write_reg(int cs, int idx, u32 val); extern u32 gpmc_cs_read_reg(int cs, int idx); -extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk); +extern int gpmc_calc_divider(unsigned int sync_clk); extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); -- cgit v1.2.3 From bc3668ea046be9e841eecfab04bddfa759e765d6 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Sat, 29 Sep 2012 12:26:13 +0530 Subject: ARM: OMAP2+: nand: header cleanup For common arm zImage existing nand header file in platform specific location was moved to generic platform data location, but it contained more than platform data, remove it. New local header has been created for exposing functions. Also move gpmc-nand platform data to platform header meant for nand from gpmc header file Signed-off-by: Afzal Mohammed --- arch/arm/plat-omap/include/plat/gpmc.h | 28 ++-------------------------- 1 file changed, 2 insertions(+), 26 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index f7e0990eaf37..4b06bb4531a2 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -11,6 +11,8 @@ #ifndef __OMAP2_GPMC_H #define __OMAP2_GPMC_H +#include + /* Maximum Number of Chip Selects */ #define GPMC_CS_NUM 8 @@ -86,16 +88,6 @@ #define PREFETCH_FIFOTHRESHOLD_MAX 0x40 #define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8) -enum omap_ecc { - /* 1-bit ecc: stored at end of spare area */ - OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ - OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at beginning of spare area as romcode */ - OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ - OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */ - OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */ -}; - /* * Note that all values in this struct are in nanoseconds except sync_clk * (which is in picoseconds), while the register values are in gpmc_fck cycles. @@ -133,22 +125,6 @@ struct gpmc_timings { u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ }; -struct gpmc_nand_regs { - void __iomem *gpmc_status; - void __iomem *gpmc_nand_command; - void __iomem *gpmc_nand_address; - void __iomem *gpmc_nand_data; - void __iomem *gpmc_prefetch_config1; - void __iomem *gpmc_prefetch_config2; - void __iomem *gpmc_prefetch_control; - void __iomem *gpmc_prefetch_status; - void __iomem *gpmc_ecc_config; - void __iomem *gpmc_ecc_control; - void __iomem *gpmc_ecc_size_config; - void __iomem *gpmc_ecc1_result; - void __iomem *gpmc_bch_result0; -}; - extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); extern int gpmc_get_client_irq(unsigned irq_config); -- cgit v1.2.3 From c46406a3f28e4bc2139415db385b91ae756009c1 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Sat, 29 Sep 2012 18:04:58 +0530 Subject: ARM: OMAP2+: gpmc: remove exported nand functions nand driver handles gpmc-nand block fully, hence no more users for these exported nand functions, remove it. Signed-off-by: Afzal Mohammed --- arch/arm/plat-omap/include/plat/gpmc.h | 31 ------------------------------- 1 file changed, 31 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 4b06bb4531a2..79f4dfc2adb3 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -34,15 +34,6 @@ #define GPMC_SET_IRQ_STATUS 0x00000004 #define GPMC_CONFIG_WP 0x00000005 -#define GPMC_GET_IRQ_STATUS 0x00000006 -#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */ -#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/ -#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */ - -#define GPMC_NAND_COMMAND 0x0000000a -#define GPMC_NAND_ADDRESS 0x0000000b -#define GPMC_NAND_DATA 0x0000000c - #define GPMC_ENABLE_IRQ 0x0000000d /* ECC commands */ @@ -78,15 +69,10 @@ #define GPMC_DEVICETYPE_NOR 0 #define GPMC_DEVICETYPE_NAND 2 #define GPMC_CONFIG_WRITEPROTECT 0x00000010 -#define GPMC_STATUS_BUFF_EMPTY 0x00000001 #define WR_RD_PIN_MONITORING 0x00600000 -#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F) -#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff) #define GPMC_IRQ_FIFOEVENTENABLE 0x01 #define GPMC_IRQ_COUNT_EVENT 0x02 -#define PREFETCH_FIFOTHRESHOLD_MAX 0x40 -#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8) /* * Note that all values in this struct are in nanoseconds except sync_clk @@ -142,25 +128,8 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); extern int gpmc_cs_set_reserved(int cs, int reserved); extern int gpmc_cs_reserved(int cs); -extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, - unsigned int u32_count, int is_write); -extern int gpmc_prefetch_reset(int cs); extern void omap3_gpmc_save_context(void); extern void omap3_gpmc_restore_context(void); -extern int gpmc_read_status(int cmd); extern int gpmc_cs_configure(int cs, int cmd, int wval); -extern int gpmc_nand_read(int cs, int cmd); -extern int gpmc_nand_write(int cs, int cmd, int wval); - -int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size); -int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code); - -#ifdef CONFIG_ARCH_OMAP3 -int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors); -int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, - int nerrors); -int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc); -int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc); -#endif /* CONFIG_ARCH_OMAP3 */ #endif -- cgit v1.2.3 From 3ef5d0071cf6c8b9a00b559232bb700ad59999d7 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Fri, 5 Oct 2012 10:37:27 +0530 Subject: ARM: OMAP2+: gpmc: localize gpmc header Requirement of gpmc header outside of mach-omap2 has been cutoff, move gpmc header file in plat-omap folder to local mach-omap2 folder Objective - common zImage participation of omap Signed-off-by: Afzal Mohammed --- arch/arm/plat-omap/include/plat/gpmc.h | 135 --------------------------------- 1 file changed, 135 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/gpmc.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h deleted file mode 100644 index 79f4dfc2adb3..000000000000 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * General-Purpose Memory Controller for OMAP2 - * - * Copyright (C) 2005-2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_GPMC_H -#define __OMAP2_GPMC_H - -#include - -/* Maximum Number of Chip Selects */ -#define GPMC_CS_NUM 8 - -#define GPMC_CS_CONFIG1 0x00 -#define GPMC_CS_CONFIG2 0x04 -#define GPMC_CS_CONFIG3 0x08 -#define GPMC_CS_CONFIG4 0x0c -#define GPMC_CS_CONFIG5 0x10 -#define GPMC_CS_CONFIG6 0x14 -#define GPMC_CS_CONFIG7 0x18 -#define GPMC_CS_NAND_COMMAND 0x1c -#define GPMC_CS_NAND_ADDRESS 0x20 -#define GPMC_CS_NAND_DATA 0x24 - -/* Control Commands */ -#define GPMC_CONFIG_RDY_BSY 0x00000001 -#define GPMC_CONFIG_DEV_SIZE 0x00000002 -#define GPMC_CONFIG_DEV_TYPE 0x00000003 -#define GPMC_SET_IRQ_STATUS 0x00000004 -#define GPMC_CONFIG_WP 0x00000005 - -#define GPMC_ENABLE_IRQ 0x0000000d - -/* ECC commands */ -#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */ -#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */ -#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */ - -#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) -#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) -#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) -#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29) -#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28) -#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27) -#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27) -#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25) -#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23) -#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22) -#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21) -#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18) -#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16) -#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12) -#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) -#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) -#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_MUXADDDATA (1 << 9) -#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) -#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) -#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) -#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2)) -#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) -#define GPMC_CONFIG7_CSVALID (1 << 6) - -#define GPMC_DEVICETYPE_NOR 0 -#define GPMC_DEVICETYPE_NAND 2 -#define GPMC_CONFIG_WRITEPROTECT 0x00000010 -#define WR_RD_PIN_MONITORING 0x00600000 -#define GPMC_IRQ_FIFOEVENTENABLE 0x01 -#define GPMC_IRQ_COUNT_EVENT 0x02 - - -/* - * Note that all values in this struct are in nanoseconds except sync_clk - * (which is in picoseconds), while the register values are in gpmc_fck cycles. - */ -struct gpmc_timings { - /* Minimum clock period for synchronous mode (in picoseconds) */ - u32 sync_clk; - - /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */ - u16 cs_on; /* Assertion time */ - u16 cs_rd_off; /* Read deassertion time */ - u16 cs_wr_off; /* Write deassertion time */ - - /* ADV signal timings corresponding to GPMC_CONFIG3 */ - u16 adv_on; /* Assertion time */ - u16 adv_rd_off; /* Read deassertion time */ - u16 adv_wr_off; /* Write deassertion time */ - - /* WE signals timings corresponding to GPMC_CONFIG4 */ - u16 we_on; /* WE assertion time */ - u16 we_off; /* WE deassertion time */ - - /* OE signals timings corresponding to GPMC_CONFIG4 */ - u16 oe_on; /* OE assertion time */ - u16 oe_off; /* OE deassertion time */ - - /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */ - u16 page_burst_access; /* Multiple access word delay */ - u16 access; /* Start-cycle to first data valid delay */ - u16 rd_cycle; /* Total read cycle time */ - u16 wr_cycle; /* Total write cycle time */ - - /* The following are only on OMAP3430 */ - u16 wr_access; /* WRACCESSTIME */ - u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ -}; - -extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); -extern int gpmc_get_client_irq(unsigned irq_config); - -extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); -extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps); -extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); -extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); -extern unsigned long gpmc_get_fclk_period(void); - -extern void gpmc_cs_write_reg(int cs, int idx, u32 val); -extern u32 gpmc_cs_read_reg(int cs, int idx); -extern int gpmc_calc_divider(unsigned int sync_clk); -extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); -extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); -extern void gpmc_cs_free(int cs); -extern int gpmc_cs_set_reserved(int cs, int reserved); -extern int gpmc_cs_reserved(int cs); -extern void omap3_gpmc_save_context(void); -extern void omap3_gpmc_restore_context(void); -extern int gpmc_cs_configure(int cs, int cmd, int wval); - -#endif -- cgit v1.2.3 From 68f39e74fbc3e58ad52d008072bddacc9eee1c7e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 15 Oct 2012 12:09:43 -0700 Subject: ARM: OMAP: Split plat/mmc.h into local headers and platform_data We need to remove this from plat for ARM common zImage support. Also remove includes not needed by the omap_hsmmc.c driver. Cc: linux-mmc@vger.kernel.org Acked-by: Chris Ball Acked-by: Venkatraman S [tony@atomide.com: fold in removal of unused driver includes] Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/mmc.h | 188 ---------------------------------- 1 file changed, 188 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/mmc.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h deleted file mode 100644 index 8b4e4f2da2f5..000000000000 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ /dev/null @@ -1,188 +0,0 @@ -/* - * MMC definitions for OMAP2 - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_MMC_H -#define __OMAP2_MMC_H - -#include -#include -#include - -#include - -#define OMAP15XX_NR_MMC 1 -#define OMAP16XX_NR_MMC 2 -#define OMAP1_MMC_SIZE 0x080 -#define OMAP1_MMC1_BASE 0xfffb7800 -#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ - -#define OMAP24XX_NR_MMC 2 -#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE -#define OMAP2_MMC1_BASE 0x4809c000 - -#define OMAP4_MMC_REG_OFFSET 0x100 - -#define OMAP_MMC_MAX_SLOTS 2 - -/* - * struct omap_mmc_dev_attr.flags possibilities - * - * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can - * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag - * should be set if this is the case. See for example Section 22.5.3 - * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia - * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). - * - * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers - * don't work correctly on some MMC controller instances on some - * OMAP3 SoCs; this flag should be set if this is the case. See - * for example Advisory 2.1.1.128 "MMC: Multiple Block Read - * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ - * Revision F (October 2010) (SPRZ278F). - */ -#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) -#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) - -struct omap_mmc_dev_attr { - u8 flags; -}; - -struct omap_mmc_platform_data { - /* back-link to device */ - struct device *dev; - - /* number of slots per controller */ - unsigned nr_slots:2; - - /* set if your board has components or wiring that limits the - * maximum frequency on the MMC bus */ - unsigned int max_freq; - - /* switch the bus to a new slot */ - int (*switch_slot)(struct device *dev, int slot); - /* initialize board-specific MMC functionality, can be NULL if - * not supported */ - int (*init)(struct device *dev); - void (*cleanup)(struct device *dev); - void (*shutdown)(struct device *dev); - - /* To handle board related suspend/resume functionality for MMC */ - int (*suspend)(struct device *dev, int slot); - int (*resume)(struct device *dev, int slot); - - /* Return context loss count due to PM states changing */ - int (*get_context_loss_count)(struct device *dev); - - /* Integrating attributes from the omap_hwmod layer */ - u8 controller_flags; - - /* Register offset deviation */ - u16 reg_offset; - - struct omap_mmc_slot_data { - - /* - * 4/8 wires and any additional host capabilities - * need to OR'd all capabilities (ref. linux/mmc/host.h) - */ - u8 wires; /* Used for the MMC driver on omap1 and 2420 */ - u32 caps; /* Used for the MMC driver on 2430 and later */ - u32 pm_caps; /* PM capabilities of the mmc */ - - /* - * nomux means "standard" muxing is wrong on this board, and - * that board-specific code handled it before common init logic. - */ - unsigned nomux:1; - - /* switch pin can be for card detect (default) or card cover */ - unsigned cover:1; - - /* use the internal clock */ - unsigned internal_clock:1; - - /* nonremovable e.g. eMMC */ - unsigned nonremovable:1; - - /* Try to sleep or power off when possible */ - unsigned power_saving:1; - - /* If using power_saving and the MMC power is not to go off */ - unsigned no_off:1; - - /* eMMC does not handle power off when not in sleep state */ - unsigned no_regulator_off_init:1; - - /* Regulator off remapped to sleep */ - unsigned vcc_aux_disable_is_sleep:1; - - /* we can put the features above into this variable */ -#define HSMMC_HAS_PBIAS (1 << 0) -#define HSMMC_HAS_UPDATED_RESET (1 << 1) - unsigned features; - - int switch_pin; /* gpio (card detect) */ - int gpio_wp; /* gpio (write protect) */ - - int (*set_bus_mode)(struct device *dev, int slot, int bus_mode); - int (*set_power)(struct device *dev, int slot, - int power_on, int vdd); - int (*get_ro)(struct device *dev, int slot); - void (*remux)(struct device *dev, int slot, int power_on); - /* Call back before enabling / disabling regulators */ - void (*before_set_reg)(struct device *dev, int slot, - int power_on, int vdd); - /* Call back after enabling / disabling regulators */ - void (*after_set_reg)(struct device *dev, int slot, - int power_on, int vdd); - /* if we have special card, init it using this callback */ - void (*init_card)(struct mmc_card *card); - - /* return MMC cover switch state, can be NULL if not supported. - * - * possible return values: - * 0 - closed - * 1 - open - */ - int (*get_cover_state)(struct device *dev, int slot); - - const char *name; - u32 ocr_mask; - - /* Card detection IRQs */ - int card_detect_irq; - int (*card_detect)(struct device *dev, int slot); - - unsigned int ban_openended:1; - - } slots[OMAP_MMC_MAX_SLOTS]; -}; - -/* called from board-specific card detection service routine */ -extern void omap_mmc_notify_cover_event(struct device *dev, int slot, - int is_closed); - -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) -void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers); -void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); -#else -static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers) -{ -} -static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) -{ -} -#endif - -extern int omap_msdi_reset(struct omap_hwmod *oh); - -#endif -- cgit v1.2.3 From 7bd3b61853da6d2fc579e27c7a1ac1e9fc968d1a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 15 Oct 2012 13:53:41 -0700 Subject: ARM: OMAP2: Move plat/menelaus.h to linux/mfd/menelaus.h We can move menelaus.h to live with other mfd headers to get it out of plat for ARM common zImage support. Acked-by: Samuel Ortiz Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/menelaus.h | 49 ------------------------------ 1 file changed, 49 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/menelaus.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h deleted file mode 100644 index 4a970ec62dd1..000000000000 --- a/arch/arm/plat-omap/include/plat/menelaus.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/menelaus.h - * - * Functions to access Menelaus power management chip - */ - -#ifndef __ASM_ARCH_MENELAUS_H -#define __ASM_ARCH_MENELAUS_H - -struct device; - -struct menelaus_platform_data { - int (* late_init)(struct device *dev); -}; - -extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), - void *data); -extern void menelaus_unregister_mmc_callback(void); -extern int menelaus_set_mmc_opendrain(int slot, int enable); -extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on); - -extern int menelaus_set_vmem(unsigned int mV); -extern int menelaus_set_vio(unsigned int mV); -extern int menelaus_set_vmmc(unsigned int mV); -extern int menelaus_set_vaux(unsigned int mV); -extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); -extern int menelaus_set_slot_sel(int enable); -extern int menelaus_get_slot_pin_states(void); -extern int menelaus_set_vcore_sw(unsigned int mV); -extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); - -#define EN_VPLL_SLEEP (1 << 7) -#define EN_VMMC_SLEEP (1 << 6) -#define EN_VAUX_SLEEP (1 << 5) -#define EN_VIO_SLEEP (1 << 4) -#define EN_VMEM_SLEEP (1 << 3) -#define EN_DC3_SLEEP (1 << 2) -#define EN_DC2_SLEEP (1 << 1) -#define EN_VC_SLEEP (1 << 0) - -extern int menelaus_set_regulator_sleep(int enable, u32 val); - -#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS) -#define omap_has_menelaus() 1 -#else -#define omap_has_menelaus() 0 -#endif - -#endif -- cgit v1.2.3 From cc8c29d9ff05cc15681f9715eea6c292877f7b41 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Mon, 15 Oct 2012 14:00:53 -0700 Subject: ARM: OMAP: DMA: Removing plat/dma-44xx.h None of the DMA channel definitions defined in plat/dma-44xx.h are used. So removing it. Signed-off-by: Lokesh Vutla Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/dma-44xx.h | 147 ----------------------------- arch/arm/plat-omap/include/plat/dma.h | 3 - 2 files changed, 150 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/dma-44xx.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h deleted file mode 100644 index 1f767cb2f38a..000000000000 --- a/arch/arm/plat-omap/include/plat/dma-44xx.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * OMAP4 SDMA channel definitions - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * Copyright (C) 2009-2010 Nokia Corporation - * - * Santosh Shilimkar (santosh.shilimkar@ti.com) - * Benoit Cousson (b-cousson@ti.com) - * Paul Walmsley (paul@pwsan.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H -#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H - -#define OMAP44XX_DMA_SYS_REQ0 2 -#define OMAP44XX_DMA_SYS_REQ1 3 -#define OMAP44XX_DMA_GPMC 4 -#define OMAP44XX_DMA_DSS_DISPC_REQ 6 -#define OMAP44XX_DMA_SYS_REQ2 7 -#define OMAP44XX_DMA_MCASP1_AXEVT 8 -#define OMAP44XX_DMA_ISS_REQ1 9 -#define OMAP44XX_DMA_ISS_REQ2 10 -#define OMAP44XX_DMA_MCASP1_AREVT 11 -#define OMAP44XX_DMA_ISS_REQ3 12 -#define OMAP44XX_DMA_ISS_REQ4 13 -#define OMAP44XX_DMA_DSS_RFBI_REQ 14 -#define OMAP44XX_DMA_SPI3_TX0 15 -#define OMAP44XX_DMA_SPI3_RX0 16 -#define OMAP44XX_DMA_MCBSP2_TX 17 -#define OMAP44XX_DMA_MCBSP2_RX 18 -#define OMAP44XX_DMA_MCBSP3_TX 19 -#define OMAP44XX_DMA_MCBSP3_RX 20 -#define OMAP44XX_DMA_C2C_SSCM_GPO0 21 -#define OMAP44XX_DMA_C2C_SSCM_GPO1 22 -#define OMAP44XX_DMA_SPI3_TX1 23 -#define OMAP44XX_DMA_SPI3_RX1 24 -#define OMAP44XX_DMA_I2C3_TX 25 -#define OMAP44XX_DMA_I2C3_RX 26 -#define OMAP44XX_DMA_I2C1_TX 27 -#define OMAP44XX_DMA_I2C1_RX 28 -#define OMAP44XX_DMA_I2C2_TX 29 -#define OMAP44XX_DMA_I2C2_RX 30 -#define OMAP44XX_DMA_MCBSP4_TX 31 -#define OMAP44XX_DMA_MCBSP4_RX 32 -#define OMAP44XX_DMA_MCBSP1_TX 33 -#define OMAP44XX_DMA_MCBSP1_RX 34 -#define OMAP44XX_DMA_SPI1_TX0 35 -#define OMAP44XX_DMA_SPI1_RX0 36 -#define OMAP44XX_DMA_SPI1_TX1 37 -#define OMAP44XX_DMA_SPI1_RX1 38 -#define OMAP44XX_DMA_SPI1_TX2 39 -#define OMAP44XX_DMA_SPI1_RX2 40 -#define OMAP44XX_DMA_SPI1_TX3 41 -#define OMAP44XX_DMA_SPI1_RX3 42 -#define OMAP44XX_DMA_SPI2_TX0 43 -#define OMAP44XX_DMA_SPI2_RX0 44 -#define OMAP44XX_DMA_SPI2_TX1 45 -#define OMAP44XX_DMA_SPI2_RX1 46 -#define OMAP44XX_DMA_MMC2_TX 47 -#define OMAP44XX_DMA_MMC2_RX 48 -#define OMAP44XX_DMA_UART1_TX 49 -#define OMAP44XX_DMA_UART1_RX 50 -#define OMAP44XX_DMA_UART2_TX 51 -#define OMAP44XX_DMA_UART2_RX 52 -#define OMAP44XX_DMA_UART3_TX 53 -#define OMAP44XX_DMA_UART3_RX 54 -#define OMAP44XX_DMA_UART4_TX 55 -#define OMAP44XX_DMA_UART4_RX 56 -#define OMAP44XX_DMA_MMC4_TX 57 -#define OMAP44XX_DMA_MMC4_RX 58 -#define OMAP44XX_DMA_MMC5_TX 59 -#define OMAP44XX_DMA_MMC5_RX 60 -#define OMAP44XX_DMA_MMC1_TX 61 -#define OMAP44XX_DMA_MMC1_RX 62 -#define OMAP44XX_DMA_SYS_REQ3 64 -#define OMAP44XX_DMA_MCPDM_UP 65 -#define OMAP44XX_DMA_MCPDM_DL 66 -#define OMAP44XX_DMA_DMIC_REQ 67 -#define OMAP44XX_DMA_C2C_SSCM_GPO2 68 -#define OMAP44XX_DMA_C2C_SSCM_GPO3 69 -#define OMAP44XX_DMA_SPI4_TX0 70 -#define OMAP44XX_DMA_SPI4_RX0 71 -#define OMAP44XX_DMA_DSS_DSI1_REQ0 72 -#define OMAP44XX_DMA_DSS_DSI1_REQ1 73 -#define OMAP44XX_DMA_DSS_DSI1_REQ2 74 -#define OMAP44XX_DMA_DSS_DSI1_REQ3 75 -#define OMAP44XX_DMA_DSS_HDMI_REQ 76 -#define OMAP44XX_DMA_MMC3_TX 77 -#define OMAP44XX_DMA_MMC3_RX 78 -#define OMAP44XX_DMA_USIM_TX 79 -#define OMAP44XX_DMA_USIM_RX 80 -#define OMAP44XX_DMA_DSS_DSI2_REQ0 81 -#define OMAP44XX_DMA_DSS_DSI2_REQ1 82 -#define OMAP44XX_DMA_DSS_DSI2_REQ2 83 -#define OMAP44XX_DMA_DSS_DSI2_REQ3 84 -#define OMAP44XX_DMA_SLIMBUS1_TX0 85 -#define OMAP44XX_DMA_SLIMBUS1_TX1 86 -#define OMAP44XX_DMA_SLIMBUS1_TX2 87 -#define OMAP44XX_DMA_SLIMBUS1_TX3 88 -#define OMAP44XX_DMA_SLIMBUS1_RX0 89 -#define OMAP44XX_DMA_SLIMBUS1_RX1 90 -#define OMAP44XX_DMA_SLIMBUS1_RX2 91 -#define OMAP44XX_DMA_SLIMBUS1_RX3 92 -#define OMAP44XX_DMA_SLIMBUS2_TX0 93 -#define OMAP44XX_DMA_SLIMBUS2_TX1 94 -#define OMAP44XX_DMA_SLIMBUS2_TX2 95 -#define OMAP44XX_DMA_SLIMBUS2_TX3 96 -#define OMAP44XX_DMA_SLIMBUS2_RX0 97 -#define OMAP44XX_DMA_SLIMBUS2_RX1 98 -#define OMAP44XX_DMA_SLIMBUS2_RX2 99 -#define OMAP44XX_DMA_SLIMBUS2_RX3 100 -#define OMAP44XX_DMA_ABE_REQ_0 101 -#define OMAP44XX_DMA_ABE_REQ_1 102 -#define OMAP44XX_DMA_ABE_REQ_2 103 -#define OMAP44XX_DMA_ABE_REQ_3 104 -#define OMAP44XX_DMA_ABE_REQ_4 105 -#define OMAP44XX_DMA_ABE_REQ_5 106 -#define OMAP44XX_DMA_ABE_REQ_6 107 -#define OMAP44XX_DMA_ABE_REQ_7 108 -#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ 109 -#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ 110 -#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ 111 -#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ 112 -#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ 113 -#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ 114 -#define OMAP44XX_DMA_DES_P_CTX_IN_REQ 115 -#define OMAP44XX_DMA_DES_P_DATA_IN_REQ 116 -#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ 117 -#define OMAP44XX_DMA_SHA2_CTXIN_P 118 -#define OMAP44XX_DMA_SHA2_DIN_P 119 -#define OMAP44XX_DMA_SHA2_CTXOUT_P 120 -#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ 121 -#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ 122 -#define OMAP44XX_DMA_I2C4_TX 124 -#define OMAP44XX_DMA_I2C4_RX 125 - -#endif diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index 0a87b052f8f7..e413bd82ecd2 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -28,9 +28,6 @@ * the omap drivers hwmod adapted. */ -/* Move omap4 specific defines to dma-44xx.h */ -#include "dma-44xx.h" - #define INT_DMA_LCD 25 /* DMA channels for omap1 */ -- cgit v1.2.3 From 8c4cc00552664d0be259388f2b1a49036c3757fa Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Mon, 15 Oct 2012 14:01:01 -0700 Subject: ARM: OMAP1: DMA: Moving OMAP1 DMA channel definitions to mach-omap1 Some of the omap1 dma channel definitions are used by some drivers. For moving omap1 dma channel definitions to mach-omap1/, the used ones should be defined locally to driver. Driver can eliminate it by using DT, platform data, or IORESOURCE_DMA. And moving OMAP1 DMA channel definitions to mach-omap1 Signed-off-by: Lokesh Vutla Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/dma.h | 66 ----------------------------------- 1 file changed, 66 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index e413bd82ecd2..972897fa027b 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -23,74 +23,8 @@ #include -/* - * TODO: These dma channel defines should go away once all - * the omap drivers hwmod adapted. - */ - #define INT_DMA_LCD 25 -/* DMA channels for omap1 */ -#define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 -#define OMAP_DMA_MCBSP1_TX 8 -#define OMAP_DMA_MCBSP1_RX 9 -#define OMAP_DMA_MCBSP3_TX 10 -#define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 -#define OMAP_DMA_MCBSP2_TX 16 -#define OMAP_DMA_MCBSP2_RX 17 -#define OMAP_DMA_UART3_TX 18 -#define OMAP_DMA_UART3_RX 19 -#define OMAP_DMA_CAMERA_IF_RX 20 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 -#define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 -#define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 - -/* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 - /* DMA channels for 24xx */ #define OMAP24XX_DMA_NO_DEVICE 0 #define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ -- cgit v1.2.3 From d5e7c864f386306587f7f43ed22d48ef7e4050d6 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Mon, 15 Oct 2012 14:03:51 -0700 Subject: ARM: OMAP2+: DMA: Moving OMAP2+ DMA channel definitions to mach-omap2 Similar to omap1, some of the omap2+ dma channel definitions are used by some drivers. For moving omap2+ dma channel definitions to mach-omap2/, the used ones should be defined locally to driver. Drivers can eliminate it using DT, platform data, or IORESOURCE_DMA And moving omap2+ DMA channel definitions to mach-omap2 Signed-off-by: Lokesh Vutla Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/dma.h | 110 ---------------------------------- 1 file changed, 110 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index 972897fa027b..3f814580ca1a 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -25,116 +25,6 @@ #define INT_DMA_LCD 25 -/* DMA channels for 24xx */ -#define OMAP24XX_DMA_NO_DEVICE 0 -#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ -#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ -#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ -#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ -#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ -#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ -#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ -#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ -#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ -#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ -#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ -#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ -#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ -#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ -#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ -#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ -#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ -#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ -#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ -#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ -#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ -#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ -#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ -#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ -#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ -#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ -#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ -#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ -#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ -#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ -#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ -#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ -#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ -#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ -#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ -#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ -#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ -#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ -#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ -#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ -#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ -#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ -#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ -#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ -#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ -#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ -#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ -#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ -#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ -#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ -#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ -#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ -#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ -#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ -#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ -#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ -#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ -#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ -#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ -#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ -#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ -#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ -#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ -#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ -#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ -#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ -#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ -#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ -#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ -#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ -#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ -#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ -#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ -#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ -#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ -#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ -#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ -#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ -#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ -#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ -#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ -#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ -#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ -#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ -#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ -#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ -#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ -#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ -#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ -#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ -#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ -#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ - -#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ -#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ - -/* Only for AM35xx */ -#define AM35XX_DMA_UART4_TX 54 -#define AM35XX_DMA_UART4_RX 55 - -/*----------------------------------------------------------------------------*/ - #define OMAP1_DMA_TOUT_IRQ (1 << 0) #define OMAP_DMA_DROP_IRQ (1 << 1) #define OMAP_DMA_HALF_IRQ (1 << 2) -- cgit v1.2.3 From 2b6c4e73248758bac8e1ed81b0d0664da0fff6f8 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Mon, 15 Oct 2012 14:04:53 -0700 Subject: ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h Move plat/dma.h to plat-omap/dma-omap.h as part of single zImage work Signed-off-by: Lokesh Vutla Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/common.c | 2 +- arch/arm/plat-omap/dma.c | 2 +- arch/arm/plat-omap/include/plat-omap/dma-omap.h | 367 ++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/dma.h | 367 ------------------------ 4 files changed, 369 insertions(+), 369 deletions(-) create mode 100644 arch/arm/plat-omap/include/plat-omap/dma-omap.h delete mode 100644 arch/arm/plat-omap/include/plat/dma.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 111315a69354..b388e87b522b 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c76ed8bff838..b729623f2967 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -37,7 +37,7 @@ #include #include -#include +#include #include /* diff --git a/arch/arm/plat-omap/include/plat-omap/dma-omap.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h new file mode 100644 index 000000000000..222be7e934e5 --- /dev/null +++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h @@ -0,0 +1,367 @@ +/* + * OMAP DMA handling defines and function + * + * Copyright (C) 2003 Nokia Corporation + * Author: Juha Yrjölä + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#include + +#define INT_DMA_LCD 25 + +#define OMAP1_DMA_TOUT_IRQ (1 << 0) +#define OMAP_DMA_DROP_IRQ (1 << 1) +#define OMAP_DMA_HALF_IRQ (1 << 2) +#define OMAP_DMA_FRAME_IRQ (1 << 3) +#define OMAP_DMA_LAST_IRQ (1 << 4) +#define OMAP_DMA_BLOCK_IRQ (1 << 5) +#define OMAP1_DMA_SYNC_IRQ (1 << 6) +#define OMAP2_DMA_PKT_IRQ (1 << 7) +#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8) +#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9) +#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) +#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) + +#define OMAP_DMA_CCR_EN (1 << 7) +#define OMAP_DMA_CCR_RD_ACTIVE (1 << 9) +#define OMAP_DMA_CCR_WR_ACTIVE (1 << 10) +#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC (1 << 24) +#define OMAP_DMA_CCR_BUFFERING_DISABLE (1 << 25) + +#define OMAP_DMA_DATA_TYPE_S8 0x00 +#define OMAP_DMA_DATA_TYPE_S16 0x01 +#define OMAP_DMA_DATA_TYPE_S32 0x02 + +#define OMAP_DMA_SYNC_ELEMENT 0x00 +#define OMAP_DMA_SYNC_FRAME 0x01 +#define OMAP_DMA_SYNC_BLOCK 0x02 +#define OMAP_DMA_SYNC_PACKET 0x03 + +#define OMAP_DMA_DST_SYNC_PREFETCH 0x02 +#define OMAP_DMA_SRC_SYNC 0x01 +#define OMAP_DMA_DST_SYNC 0x00 + +#define OMAP_DMA_PORT_EMIFF 0x00 +#define OMAP_DMA_PORT_EMIFS 0x01 +#define OMAP_DMA_PORT_OCP_T1 0x02 +#define OMAP_DMA_PORT_TIPB 0x03 +#define OMAP_DMA_PORT_OCP_T2 0x04 +#define OMAP_DMA_PORT_MPUI 0x05 + +#define OMAP_DMA_AMODE_CONSTANT 0x00 +#define OMAP_DMA_AMODE_POST_INC 0x01 +#define OMAP_DMA_AMODE_SINGLE_IDX 0x02 +#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 + +#define DMA_DEFAULT_FIFO_DEPTH 0x10 +#define DMA_DEFAULT_ARB_RATE 0x01 +/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */ +#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */ +#define DMA_THREAD_RESERVE_ONET (0x01 << 12) +#define DMA_THREAD_RESERVE_TWOT (0x02 << 12) +#define DMA_THREAD_RESERVE_THREET (0x03 << 12) +#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */ +#define DMA_THREAD_FIFO_75 (0x01 << 14) +#define DMA_THREAD_FIFO_25 (0x02 << 14) +#define DMA_THREAD_FIFO_50 (0x03 << 14) + +/* DMA4_OCP_SYSCONFIG bits */ +#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12) +#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8) +#define DMA_SYSCONFIG_EMUFREE (1 << 5) +#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3) +#define DMA_SYSCONFIG_SOFTRESET (1 << 2) +#define DMA_SYSCONFIG_AUTOIDLE (1 << 0) + +#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12) +#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3) + +#define DMA_IDLEMODE_SMARTIDLE 0x2 +#define DMA_IDLEMODE_NO_IDLE 0x1 +#define DMA_IDLEMODE_FORCE_IDLE 0x0 + +/* Chaining modes*/ +#ifndef CONFIG_ARCH_OMAP1 +#define OMAP_DMA_STATIC_CHAIN 0x1 +#define OMAP_DMA_DYNAMIC_CHAIN 0x2 +#define OMAP_DMA_CHAIN_ACTIVE 0x1 +#define OMAP_DMA_CHAIN_INACTIVE 0x0 +#endif + +#define DMA_CH_PRIO_HIGH 0x1 +#define DMA_CH_PRIO_LOW 0x0 /* Def */ + +/* Errata handling */ +#define IS_DMA_ERRATA(id) (errata & (id)) +#define SET_DMA_ERRATA(id) (errata |= (id)) + +#define DMA_ERRATA_IFRAME_BUFFERING BIT(0x0) +#define DMA_ERRATA_PARALLEL_CHANNELS BIT(0x1) +#define DMA_ERRATA_i378 BIT(0x2) +#define DMA_ERRATA_i541 BIT(0x3) +#define DMA_ERRATA_i88 BIT(0x4) +#define DMA_ERRATA_3_3 BIT(0x5) +#define DMA_ROMCODE_BUG BIT(0x6) + +/* Attributes for OMAP DMA Contrller */ +#define DMA_LINKED_LCH BIT(0x0) +#define GLOBAL_PRIORITY BIT(0x1) +#define RESERVE_CHANNEL BIT(0x2) +#define IS_CSSA_32 BIT(0x3) +#define IS_CDSA_32 BIT(0x4) +#define IS_RW_PRIORITY BIT(0x5) +#define ENABLE_1510_MODE BIT(0x6) +#define SRC_PORT BIT(0x7) +#define DST_PORT BIT(0x8) +#define SRC_INDEX BIT(0x9) +#define DST_INDEX BIT(0xA) +#define IS_BURST_ONLY4 BIT(0xB) +#define CLEAR_CSR_ON_READ BIT(0xC) +#define IS_WORD_16 BIT(0xD) + +/* Defines for DMA Capabilities */ +#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18) +#define DMA_HAS_CONSTANT_FILL_CAPS (0x1 << 19) +#define DMA_HAS_DESCRIPTOR_CAPS (0x3 << 20) + +enum omap_reg_offsets { + +GCR, GSCR, GRST1, HW_ID, +PCH2_ID, PCH0_ID, PCH1_ID, PCHG_ID, +PCHD_ID, CAPS_0, CAPS_1, CAPS_2, +CAPS_3, CAPS_4, PCH2_SR, PCH0_SR, +PCH1_SR, PCHD_SR, REVISION, IRQSTATUS_L0, +IRQSTATUS_L1, IRQSTATUS_L2, IRQSTATUS_L3, IRQENABLE_L0, +IRQENABLE_L1, IRQENABLE_L2, IRQENABLE_L3, SYSSTATUS, +OCP_SYSCONFIG, + +/* omap1+ specific */ +CPC, CCR2, LCH_CTRL, + +/* Common registers for all omap's */ +CSDP, CCR, CICR, CSR, +CEN, CFN, CSFI, CSEI, +CSAC, CDAC, CDEI, +CDFI, CLNK_CTRL, + +/* Channel specific registers */ +CSSA, CDSA, COLOR, +CCEN, CCFN, + +/* omap3630 and omap4 specific */ +CDP, CNDP, CCDN, + +}; + +enum omap_dma_burst_mode { + OMAP_DMA_DATA_BURST_DIS = 0, + OMAP_DMA_DATA_BURST_4, + OMAP_DMA_DATA_BURST_8, + OMAP_DMA_DATA_BURST_16, +}; + +enum end_type { + OMAP_DMA_LITTLE_ENDIAN = 0, + OMAP_DMA_BIG_ENDIAN +}; + +enum omap_dma_color_mode { + OMAP_DMA_COLOR_DIS = 0, + OMAP_DMA_CONSTANT_FILL, + OMAP_DMA_TRANSPARENT_COPY +}; + +enum omap_dma_write_mode { + OMAP_DMA_WRITE_NON_POSTED = 0, + OMAP_DMA_WRITE_POSTED, + OMAP_DMA_WRITE_LAST_NON_POSTED +}; + +enum omap_dma_channel_mode { + OMAP_DMA_LCH_2D = 0, + OMAP_DMA_LCH_G, + OMAP_DMA_LCH_P, + OMAP_DMA_LCH_PD +}; + +struct omap_dma_channel_params { + int data_type; /* data type 8,16,32 */ + int elem_count; /* number of elements in a frame */ + int frame_count; /* number of frames in a element */ + + int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int src_amode; /* constant, post increment, indexed, + double indexed */ + unsigned long src_start; /* source address : physical */ + int src_ei; /* source element index */ + int src_fi; /* source frame index */ + + int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int dst_amode; /* constant, post increment, indexed, + double indexed */ + unsigned long dst_start; /* source address : physical */ + int dst_ei; /* source element index */ + int dst_fi; /* source frame index */ + + int trigger; /* trigger attached if the channel is + synchronized */ + int sync_mode; /* sycn on element, frame , block or packet */ + int src_or_dst_synch; /* source synch(1) or destination synch(0) */ + + int ie; /* interrupt enabled */ + + unsigned char read_prio;/* read priority */ + unsigned char write_prio;/* write priority */ + +#ifndef CONFIG_ARCH_OMAP1 + enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */ +#endif +}; + +struct omap_dma_lch { + int next_lch; + int dev_id; + u16 saved_csr; + u16 enabled_irqs; + const char *dev_name; + void (*callback)(int lch, u16 ch_status, void *data); + void *data; + long flags; + /* required for Dynamic chaining */ + int prev_linked_ch; + int next_linked_ch; + int state; + int chain_id; + int status; +}; + +struct omap_dma_dev_attr { + u32 dev_caps; + u16 lch_count; + u16 chan_count; + struct omap_dma_lch *chan; +}; + +/* System DMA platform data structure */ +struct omap_system_dma_plat_info { + struct omap_dma_dev_attr *dma_attr; + u32 errata; + void (*disable_irq_lch)(int lch); + void (*show_dma_caps)(void); + void (*clear_lch_regs)(int lch); + void (*clear_dma)(int lch); + void (*dma_write)(u32 val, int reg, int lch); + u32 (*dma_read)(int reg, int lch); +}; + +extern void __init omap_init_consistent_dma_size(void); +extern void omap_set_dma_priority(int lch, int dst_port, int priority); +extern int omap_request_dma(int dev_id, const char *dev_name, + void (*callback)(int lch, u16 ch_status, void *data), + void *data, int *dma_ch); +extern void omap_enable_dma_irq(int ch, u16 irq_bits); +extern void omap_disable_dma_irq(int ch, u16 irq_bits); +extern void omap_free_dma(int ch); +extern void omap_start_dma(int lch); +extern void omap_stop_dma(int lch); +extern void omap_set_dma_transfer_params(int lch, int data_type, + int elem_count, int frame_count, + int sync_mode, + int dma_trigger, int src_or_dst_synch); +extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, + u32 color); +extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); +extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode); + +extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, + unsigned long src_start, + int src_ei, int src_fi); +extern void omap_set_dma_src_index(int lch, int eidx, int fidx); +extern void omap_set_dma_src_data_pack(int lch, int enable); +extern void omap_set_dma_src_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, + unsigned long dest_start, + int dst_ei, int dst_fi); +extern void omap_set_dma_dest_index(int lch, int eidx, int fidx); +extern void omap_set_dma_dest_data_pack(int lch, int enable); +extern void omap_set_dma_dest_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_set_dma_params(int lch, + struct omap_dma_channel_params *params); + +extern void omap_dma_link_lch(int lch_head, int lch_queue); +extern void omap_dma_unlink_lch(int lch_head, int lch_queue); + +extern int omap_set_dma_callback(int lch, + void (*callback)(int lch, u16 ch_status, void *data), + void *data); +extern dma_addr_t omap_get_dma_src_pos(int lch); +extern dma_addr_t omap_get_dma_dst_pos(int lch); +extern void omap_clear_dma(int lch); +extern int omap_get_dma_active_status(int lch); +extern int omap_dma_running(void); +extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, + int tparams); +extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, + unsigned char write_prio); +extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); +extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); +extern int omap_get_dma_index(int lch, int *ei, int *fi); + +void omap_dma_global_context_save(void); +void omap_dma_global_context_restore(void); + +extern void omap_dma_disable_irq(int lch); + +/* Chaining APIs */ +#ifndef CONFIG_ARCH_OMAP1 +extern int omap_request_dma_chain(int dev_id, const char *dev_name, + void (*callback) (int lch, u16 ch_status, + void *data), + int *chain_id, int no_of_chans, + int chain_mode, + struct omap_dma_channel_params params); +extern int omap_free_dma_chain(int chain_id); +extern int omap_dma_chain_a_transfer(int chain_id, int src_start, + int dest_start, int elem_count, + int frame_count, void *callbk_data); +extern int omap_start_dma_chain_transfers(int chain_id); +extern int omap_stop_dma_chain_transfers(int chain_id); +extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi); +extern int omap_get_dma_chain_dst_pos(int chain_id); +extern int omap_get_dma_chain_src_pos(int chain_id); + +extern int omap_modify_dma_chain_params(int chain_id, + struct omap_dma_channel_params params); +extern int omap_dma_chain_status(int chain_id); +#endif + +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP) +#include +#else +static inline int omap_lcd_dma_running(void) +{ + return 0; +} +#endif + +#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h deleted file mode 100644 index 3f814580ca1a..000000000000 --- a/arch/arm/plat-omap/include/plat/dma.h +++ /dev/null @@ -1,367 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/dma.h - * - * Copyright (C) 2003 Nokia Corporation - * Author: Juha Yrjölä - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include - -#define INT_DMA_LCD 25 - -#define OMAP1_DMA_TOUT_IRQ (1 << 0) -#define OMAP_DMA_DROP_IRQ (1 << 1) -#define OMAP_DMA_HALF_IRQ (1 << 2) -#define OMAP_DMA_FRAME_IRQ (1 << 3) -#define OMAP_DMA_LAST_IRQ (1 << 4) -#define OMAP_DMA_BLOCK_IRQ (1 << 5) -#define OMAP1_DMA_SYNC_IRQ (1 << 6) -#define OMAP2_DMA_PKT_IRQ (1 << 7) -#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8) -#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9) -#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) -#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) - -#define OMAP_DMA_CCR_EN (1 << 7) -#define OMAP_DMA_CCR_RD_ACTIVE (1 << 9) -#define OMAP_DMA_CCR_WR_ACTIVE (1 << 10) -#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC (1 << 24) -#define OMAP_DMA_CCR_BUFFERING_DISABLE (1 << 25) - -#define OMAP_DMA_DATA_TYPE_S8 0x00 -#define OMAP_DMA_DATA_TYPE_S16 0x01 -#define OMAP_DMA_DATA_TYPE_S32 0x02 - -#define OMAP_DMA_SYNC_ELEMENT 0x00 -#define OMAP_DMA_SYNC_FRAME 0x01 -#define OMAP_DMA_SYNC_BLOCK 0x02 -#define OMAP_DMA_SYNC_PACKET 0x03 - -#define OMAP_DMA_DST_SYNC_PREFETCH 0x02 -#define OMAP_DMA_SRC_SYNC 0x01 -#define OMAP_DMA_DST_SYNC 0x00 - -#define OMAP_DMA_PORT_EMIFF 0x00 -#define OMAP_DMA_PORT_EMIFS 0x01 -#define OMAP_DMA_PORT_OCP_T1 0x02 -#define OMAP_DMA_PORT_TIPB 0x03 -#define OMAP_DMA_PORT_OCP_T2 0x04 -#define OMAP_DMA_PORT_MPUI 0x05 - -#define OMAP_DMA_AMODE_CONSTANT 0x00 -#define OMAP_DMA_AMODE_POST_INC 0x01 -#define OMAP_DMA_AMODE_SINGLE_IDX 0x02 -#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 - -#define DMA_DEFAULT_FIFO_DEPTH 0x10 -#define DMA_DEFAULT_ARB_RATE 0x01 -/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */ -#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */ -#define DMA_THREAD_RESERVE_ONET (0x01 << 12) -#define DMA_THREAD_RESERVE_TWOT (0x02 << 12) -#define DMA_THREAD_RESERVE_THREET (0x03 << 12) -#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */ -#define DMA_THREAD_FIFO_75 (0x01 << 14) -#define DMA_THREAD_FIFO_25 (0x02 << 14) -#define DMA_THREAD_FIFO_50 (0x03 << 14) - -/* DMA4_OCP_SYSCONFIG bits */ -#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12) -#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8) -#define DMA_SYSCONFIG_EMUFREE (1 << 5) -#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3) -#define DMA_SYSCONFIG_SOFTRESET (1 << 2) -#define DMA_SYSCONFIG_AUTOIDLE (1 << 0) - -#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12) -#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3) - -#define DMA_IDLEMODE_SMARTIDLE 0x2 -#define DMA_IDLEMODE_NO_IDLE 0x1 -#define DMA_IDLEMODE_FORCE_IDLE 0x0 - -/* Chaining modes*/ -#ifndef CONFIG_ARCH_OMAP1 -#define OMAP_DMA_STATIC_CHAIN 0x1 -#define OMAP_DMA_DYNAMIC_CHAIN 0x2 -#define OMAP_DMA_CHAIN_ACTIVE 0x1 -#define OMAP_DMA_CHAIN_INACTIVE 0x0 -#endif - -#define DMA_CH_PRIO_HIGH 0x1 -#define DMA_CH_PRIO_LOW 0x0 /* Def */ - -/* Errata handling */ -#define IS_DMA_ERRATA(id) (errata & (id)) -#define SET_DMA_ERRATA(id) (errata |= (id)) - -#define DMA_ERRATA_IFRAME_BUFFERING BIT(0x0) -#define DMA_ERRATA_PARALLEL_CHANNELS BIT(0x1) -#define DMA_ERRATA_i378 BIT(0x2) -#define DMA_ERRATA_i541 BIT(0x3) -#define DMA_ERRATA_i88 BIT(0x4) -#define DMA_ERRATA_3_3 BIT(0x5) -#define DMA_ROMCODE_BUG BIT(0x6) - -/* Attributes for OMAP DMA Contrller */ -#define DMA_LINKED_LCH BIT(0x0) -#define GLOBAL_PRIORITY BIT(0x1) -#define RESERVE_CHANNEL BIT(0x2) -#define IS_CSSA_32 BIT(0x3) -#define IS_CDSA_32 BIT(0x4) -#define IS_RW_PRIORITY BIT(0x5) -#define ENABLE_1510_MODE BIT(0x6) -#define SRC_PORT BIT(0x7) -#define DST_PORT BIT(0x8) -#define SRC_INDEX BIT(0x9) -#define DST_INDEX BIT(0xA) -#define IS_BURST_ONLY4 BIT(0xB) -#define CLEAR_CSR_ON_READ BIT(0xC) -#define IS_WORD_16 BIT(0xD) - -/* Defines for DMA Capabilities */ -#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18) -#define DMA_HAS_CONSTANT_FILL_CAPS (0x1 << 19) -#define DMA_HAS_DESCRIPTOR_CAPS (0x3 << 20) - -enum omap_reg_offsets { - -GCR, GSCR, GRST1, HW_ID, -PCH2_ID, PCH0_ID, PCH1_ID, PCHG_ID, -PCHD_ID, CAPS_0, CAPS_1, CAPS_2, -CAPS_3, CAPS_4, PCH2_SR, PCH0_SR, -PCH1_SR, PCHD_SR, REVISION, IRQSTATUS_L0, -IRQSTATUS_L1, IRQSTATUS_L2, IRQSTATUS_L3, IRQENABLE_L0, -IRQENABLE_L1, IRQENABLE_L2, IRQENABLE_L3, SYSSTATUS, -OCP_SYSCONFIG, - -/* omap1+ specific */ -CPC, CCR2, LCH_CTRL, - -/* Common registers for all omap's */ -CSDP, CCR, CICR, CSR, -CEN, CFN, CSFI, CSEI, -CSAC, CDAC, CDEI, -CDFI, CLNK_CTRL, - -/* Channel specific registers */ -CSSA, CDSA, COLOR, -CCEN, CCFN, - -/* omap3630 and omap4 specific */ -CDP, CNDP, CCDN, - -}; - -enum omap_dma_burst_mode { - OMAP_DMA_DATA_BURST_DIS = 0, - OMAP_DMA_DATA_BURST_4, - OMAP_DMA_DATA_BURST_8, - OMAP_DMA_DATA_BURST_16, -}; - -enum end_type { - OMAP_DMA_LITTLE_ENDIAN = 0, - OMAP_DMA_BIG_ENDIAN -}; - -enum omap_dma_color_mode { - OMAP_DMA_COLOR_DIS = 0, - OMAP_DMA_CONSTANT_FILL, - OMAP_DMA_TRANSPARENT_COPY -}; - -enum omap_dma_write_mode { - OMAP_DMA_WRITE_NON_POSTED = 0, - OMAP_DMA_WRITE_POSTED, - OMAP_DMA_WRITE_LAST_NON_POSTED -}; - -enum omap_dma_channel_mode { - OMAP_DMA_LCH_2D = 0, - OMAP_DMA_LCH_G, - OMAP_DMA_LCH_P, - OMAP_DMA_LCH_PD -}; - -struct omap_dma_channel_params { - int data_type; /* data type 8,16,32 */ - int elem_count; /* number of elements in a frame */ - int frame_count; /* number of frames in a element */ - - int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ - int src_amode; /* constant, post increment, indexed, - double indexed */ - unsigned long src_start; /* source address : physical */ - int src_ei; /* source element index */ - int src_fi; /* source frame index */ - - int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ - int dst_amode; /* constant, post increment, indexed, - double indexed */ - unsigned long dst_start; /* source address : physical */ - int dst_ei; /* source element index */ - int dst_fi; /* source frame index */ - - int trigger; /* trigger attached if the channel is - synchronized */ - int sync_mode; /* sycn on element, frame , block or packet */ - int src_or_dst_synch; /* source synch(1) or destination synch(0) */ - - int ie; /* interrupt enabled */ - - unsigned char read_prio;/* read priority */ - unsigned char write_prio;/* write priority */ - -#ifndef CONFIG_ARCH_OMAP1 - enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */ -#endif -}; - -struct omap_dma_lch { - int next_lch; - int dev_id; - u16 saved_csr; - u16 enabled_irqs; - const char *dev_name; - void (*callback)(int lch, u16 ch_status, void *data); - void *data; - long flags; - /* required for Dynamic chaining */ - int prev_linked_ch; - int next_linked_ch; - int state; - int chain_id; - int status; -}; - -struct omap_dma_dev_attr { - u32 dev_caps; - u16 lch_count; - u16 chan_count; - struct omap_dma_lch *chan; -}; - -/* System DMA platform data structure */ -struct omap_system_dma_plat_info { - struct omap_dma_dev_attr *dma_attr; - u32 errata; - void (*disable_irq_lch)(int lch); - void (*show_dma_caps)(void); - void (*clear_lch_regs)(int lch); - void (*clear_dma)(int lch); - void (*dma_write)(u32 val, int reg, int lch); - u32 (*dma_read)(int reg, int lch); -}; - -extern void __init omap_init_consistent_dma_size(void); -extern void omap_set_dma_priority(int lch, int dst_port, int priority); -extern int omap_request_dma(int dev_id, const char *dev_name, - void (*callback)(int lch, u16 ch_status, void *data), - void *data, int *dma_ch); -extern void omap_enable_dma_irq(int ch, u16 irq_bits); -extern void omap_disable_dma_irq(int ch, u16 irq_bits); -extern void omap_free_dma(int ch); -extern void omap_start_dma(int lch); -extern void omap_stop_dma(int lch); -extern void omap_set_dma_transfer_params(int lch, int data_type, - int elem_count, int frame_count, - int sync_mode, - int dma_trigger, int src_or_dst_synch); -extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, - u32 color); -extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); -extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode); - -extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, - unsigned long src_start, - int src_ei, int src_fi); -extern void omap_set_dma_src_index(int lch, int eidx, int fidx); -extern void omap_set_dma_src_data_pack(int lch, int enable); -extern void omap_set_dma_src_burst_mode(int lch, - enum omap_dma_burst_mode burst_mode); - -extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, - unsigned long dest_start, - int dst_ei, int dst_fi); -extern void omap_set_dma_dest_index(int lch, int eidx, int fidx); -extern void omap_set_dma_dest_data_pack(int lch, int enable); -extern void omap_set_dma_dest_burst_mode(int lch, - enum omap_dma_burst_mode burst_mode); - -extern void omap_set_dma_params(int lch, - struct omap_dma_channel_params *params); - -extern void omap_dma_link_lch(int lch_head, int lch_queue); -extern void omap_dma_unlink_lch(int lch_head, int lch_queue); - -extern int omap_set_dma_callback(int lch, - void (*callback)(int lch, u16 ch_status, void *data), - void *data); -extern dma_addr_t omap_get_dma_src_pos(int lch); -extern dma_addr_t omap_get_dma_dst_pos(int lch); -extern void omap_clear_dma(int lch); -extern int omap_get_dma_active_status(int lch); -extern int omap_dma_running(void); -extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, - int tparams); -extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, - unsigned char write_prio); -extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); -extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); -extern int omap_get_dma_index(int lch, int *ei, int *fi); - -void omap_dma_global_context_save(void); -void omap_dma_global_context_restore(void); - -extern void omap_dma_disable_irq(int lch); - -/* Chaining APIs */ -#ifndef CONFIG_ARCH_OMAP1 -extern int omap_request_dma_chain(int dev_id, const char *dev_name, - void (*callback) (int lch, u16 ch_status, - void *data), - int *chain_id, int no_of_chans, - int chain_mode, - struct omap_dma_channel_params params); -extern int omap_free_dma_chain(int chain_id); -extern int omap_dma_chain_a_transfer(int chain_id, int src_start, - int dest_start, int elem_count, - int frame_count, void *callbk_data); -extern int omap_start_dma_chain_transfers(int chain_id); -extern int omap_stop_dma_chain_transfers(int chain_id); -extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi); -extern int omap_get_dma_chain_dst_pos(int chain_id); -extern int omap_get_dma_chain_src_pos(int chain_id); - -extern int omap_modify_dma_chain_params(int chain_id, - struct omap_dma_channel_params params); -extern int omap_dma_chain_status(int chain_id); -#endif - -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP) -#include -#else -static inline int omap_lcd_dma_running(void) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_DMA_H */ -- cgit v1.2.3 From 406c8563a7b07ce91b1310536948477c7a8755de Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 8 Oct 2012 14:35:44 +0300 Subject: OMAP: VRFB: convert vrfb to platform device This patch converts vrfb library into a platform device, in an effort to remove omap dependencies. The platform device is registered in arch/arm/plat-omap/fb.c and assigned resources depending on whether running on omap2 or omap3. The vrfb driver will parse those resources and use them to access vrfb configuration registers and the vrfb virtual rotation areas. Signed-off-by: Tomi Valkeinen Cc: Tony Lindgren --- arch/arm/plat-omap/fb.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index bcbb9d5dc293..f868caeedfd6 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -33,6 +33,67 @@ #include #include +#include + +#ifdef CONFIG_OMAP2_VRFB + +/* + * The first memory resource is the register region for VRFB, + * the rest are VRFB virtual memory areas for each VRFB context. + */ + +static const struct resource omap2_vrfb_resources[] = { + DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"), + DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"), + DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"), + DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"), + DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"), +}; + +static const struct resource omap3_vrfb_resources[] = { + DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"), + DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"), + DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"), + DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"), + DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"), + DEFINE_RES_MEM_NAMED(0xe0000000u, 0x4000000, "vrfb-area-4"), + DEFINE_RES_MEM_NAMED(0xe4000000u, 0x4000000, "vrfb-area-5"), + DEFINE_RES_MEM_NAMED(0xe8000000u, 0x4000000, "vrfb-area-6"), + DEFINE_RES_MEM_NAMED(0xec000000u, 0x4000000, "vrfb-area-7"), + DEFINE_RES_MEM_NAMED(0xf0000000u, 0x4000000, "vrfb-area-8"), + DEFINE_RES_MEM_NAMED(0xf4000000u, 0x4000000, "vrfb-area-9"), + DEFINE_RES_MEM_NAMED(0xf8000000u, 0x4000000, "vrfb-area-10"), + DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"), +}; + +static int __init omap_init_vrfb(void) +{ + struct platform_device *pdev; + const struct resource *res; + unsigned int num_res; + + if (cpu_is_omap24xx()) { + res = omap2_vrfb_resources; + num_res = ARRAY_SIZE(omap2_vrfb_resources); + } else if (cpu_is_omap34xx()) { + res = omap3_vrfb_resources; + num_res = ARRAY_SIZE(omap3_vrfb_resources); + } else { + return 0; + } + + pdev = platform_device_register_resndata(NULL, "omapvrfb", -1, + res, num_res, NULL, 0); + + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + else + return 0; +} + +arch_initcall(omap_init_vrfb); +#endif + #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) static bool omapfb_lcd_configured; -- cgit v1.2.3 From 6a1c9f6d19180cdbb603e5b77bd7b57d01260664 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 8 Oct 2012 14:52:24 +0300 Subject: OMAP: move arch/arm/plat-omap/include/plat/vrfb.h Now that vrfb driver is not omap dependent anymore, we can move vrfb.h from arch/arm/plat-omap/include/plat to include/video/omapvrfb.h. Signed-off-by: Tomi Valkeinen Cc: Tony Lindgren Cc: Vaibhav Hiremath --- arch/arm/plat-omap/include/plat/vrfb.h | 66 ---------------------------------- 1 file changed, 66 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/vrfb.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h deleted file mode 100644 index 3792bdea2f6d..000000000000 --- a/arch/arm/plat-omap/include/plat/vrfb.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * VRFB Rotation Engine - * - * Copyright (C) 2009 Nokia Corporation - * Author: Tomi Valkeinen - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __OMAP_VRFB_H__ -#define __OMAP_VRFB_H__ - -#define OMAP_VRFB_LINE_LEN 2048 - -struct vrfb { - u8 context; - void __iomem *vaddr[4]; - unsigned long paddr[4]; - u16 xres; - u16 yres; - u16 xoffset; - u16 yoffset; - u8 bytespp; - bool yuv_mode; -}; - -#ifdef CONFIG_OMAP2_VRFB -extern int omap_vrfb_request_ctx(struct vrfb *vrfb); -extern void omap_vrfb_release_ctx(struct vrfb *vrfb); -extern void omap_vrfb_adjust_size(u16 *width, u16 *height, - u8 bytespp); -extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp); -extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp); -extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, - u16 width, u16 height, - unsigned bytespp, bool yuv_mode); -extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot); -extern void omap_vrfb_restore_context(void); - -#else -static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; } -static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {} -static inline void omap_vrfb_adjust_size(u16 *width, u16 *height, - u8 bytespp) {} -static inline u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp) - { return 0; } -static inline u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp) - { return 0; } -static inline void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, - u16 width, u16 height, unsigned bytespp, bool yuv_mode) {} -static inline int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot) - { return 0; } -static inline void omap_vrfb_restore_context(void) {} -#endif -#endif /* __VRFB_H */ -- cgit v1.2.3 From 8c05a412243b522a263326c4839aec081151147c Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 9 Oct 2012 11:47:20 +0300 Subject: OMAP: SDRC: remove VRFB code Now that VRFB driver handles its registers independently, we can remove the VRFB related code from OMAP's sdrc. Signed-off-by: Tomi Valkeinen Cc: Tony Lindgren --- arch/arm/plat-omap/include/plat/sdrc.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index 36d6a7666216..c68bab29cfc5 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -94,9 +94,6 @@ /* SMS register offsets - read/write with sms_{read,write}_reg() */ #define SMS_SYSCONFIG 0x010 -#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context) -#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context) -#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context) /* REVISIT: fill in other SMS registers here */ @@ -137,10 +134,6 @@ int omap2_sdrc_get_params(unsigned long r, void omap2_sms_save_context(void); void omap2_sms_restore_context(void); -void omap2_sms_write_rot_control(u32 val, unsigned ctx); -void omap2_sms_write_rot_size(u32 val, unsigned ctx); -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx); - #ifdef CONFIG_ARCH_OMAP2 struct memory_timings { -- cgit v1.2.3 From 3e6ece13d966a20a38ee7adfac452a47455ccd7a Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 17 Oct 2012 00:46:45 +0000 Subject: ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h Remove arch/arm/plat-omap/include/plat/sdrc.h by folding its contents into arch/arm/mach-omap2/sdrc.h. The objective is to assist Tony in cleaning out arch/arm/plat-omap/, as his upstreams request. Signed-off-by: Paul Walmsley Cc: Tony Lindgren [tony@atomide.com: updated to remove rotate macros] Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/sdrc.h | 157 --------------------------------- 1 file changed, 157 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/sdrc.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h deleted file mode 100644 index c68bab29cfc5..000000000000 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ /dev/null @@ -1,157 +0,0 @@ -#ifndef ____ASM_ARCH_SDRC_H -#define ____ASM_ARCH_SDRC_H - -/* - * OMAP2/3 SDRC/SMS register definitions - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation - * - * Tony Lindgren - * Paul Walmsley - * Richard Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ - -#define SDRC_SYSCONFIG 0x010 -#define SDRC_CS_CFG 0x040 -#define SDRC_SHARING 0x044 -#define SDRC_ERR_TYPE 0x04C -#define SDRC_DLLA_CTRL 0x060 -#define SDRC_DLLA_STATUS 0x064 -#define SDRC_DLLB_CTRL 0x068 -#define SDRC_DLLB_STATUS 0x06C -#define SDRC_POWER 0x070 -#define SDRC_MCFG_0 0x080 -#define SDRC_MR_0 0x084 -#define SDRC_EMR2_0 0x08c -#define SDRC_ACTIM_CTRL_A_0 0x09c -#define SDRC_ACTIM_CTRL_B_0 0x0a0 -#define SDRC_RFR_CTRL_0 0x0a4 -#define SDRC_MANUAL_0 0x0a8 -#define SDRC_MCFG_1 0x0B0 -#define SDRC_MR_1 0x0B4 -#define SDRC_EMR2_1 0x0BC -#define SDRC_ACTIM_CTRL_A_1 0x0C4 -#define SDRC_ACTIM_CTRL_B_1 0x0C8 -#define SDRC_RFR_CTRL_1 0x0D4 -#define SDRC_MANUAL_1 0x0D8 - -#define SDRC_POWER_AUTOCOUNT_SHIFT 8 -#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) -#define SDRC_POWER_CLKCTRL_SHIFT 4 -#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) -#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) - -/* - * These values represent the number of memory clock cycles between - * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 - * rows per device, and include a subtraction of a 50 cycle window in the - * event that the autorefresh command is delayed due to other SDRC activity. - * The '| 1' sets the ARE field to send one autorefresh when the autorefresh - * counter reaches 0. - * - * These represent optimal values for common parts, it won't work for all. - * As long as you scale down, most parameters are still work, they just - * become sub-optimal. The RFR value goes in the opposite direction. If you - * don't adjust it down as your clock period increases the refresh interval - * will not be met. Setting all parameters for complete worst case may work, - * but may cut memory performance by 2x. Due to errata the DLLs need to be - * unlocked and their value needs run time calibration. A dynamic call is - * need for that as no single right value exists acorss production samples. - * - * Only the FULL speed values are given. Current code is such that rate - * changes must be made at DPLLoutx2. The actual value adjustment for low - * frequency operation will be handled by omap_set_performance() - * - * By having the boot loader boot up in the fastest L4 speed available likely - * will result in something which you can switch between. - */ -#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) -#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) -#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) -#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ -#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ - - -/* - * SMS register access - */ - -#define OMAP242X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) - -/* SMS register offsets - read/write with sms_{read,write}_reg() */ - -#define SMS_SYSCONFIG 0x010 -/* REVISIT: fill in other SMS registers here */ - - -#ifndef __ASSEMBLER__ - -/** - * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate - * @rate: SDRC clock rate (in Hz) - * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate - * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate - * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate - * @mr: Value to program to SDRC_MR for this rate - * - * This structure holds a pre-computed set of register values for the - * SDRC for a given SDRC clock rate and SDRAM chip. These are - * intended to be pre-computed and specified in an array in the board-*.c - * files. The structure is keyed off the 'rate' field. - */ -struct omap_sdrc_params { - unsigned long rate; - u32 actim_ctrla; - u32 actim_ctrlb; - u32 rfr_ctrl; - u32 mr; -}; - -#ifdef CONFIG_SOC_HAS_OMAP2_SDRC -void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1); -#else -static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1) {}; -#endif - -int omap2_sdrc_get_params(unsigned long r, - struct omap_sdrc_params **sdrc_cs0, - struct omap_sdrc_params **sdrc_cs1); -void omap2_sms_save_context(void); -void omap2_sms_restore_context(void); - -#ifdef CONFIG_ARCH_OMAP2 - -struct memory_timings { - u32 m_type; /* ddr = 1, sdr = 0 */ - u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ - u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ - u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ - u32 base_cs; /* base chip select to use for calculations */ -}; - -extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); -struct omap_sdrc_params *rx51_get_sdram_timings(void); - -u32 omap2xxx_sdrc_dll_is_unlocked(void); -u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); - -#endif /* CONFIG_ARCH_OMAP2 */ - -#endif /* __ASSEMBLER__ */ - -#endif -- cgit v1.2.3 From 4c98dc6b8ef2f73bdbfa78186db9a76507ba9ea3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 2 Oct 2012 12:39:09 -0700 Subject: ARM: OMAP: Make plat/fpga.h local to arch/arm/plat-omap There's no need to have this file in plat/fpga.h. We can make it local to plat-omap replacing fpga_read/write functions directly with readb/writeb as that's how they are already defined in fpga.h. Note that 2420 based H4 is also using the fpga, so let's keep the led support around in plat-omap until we flip over mach-omap2 to device tree. Cc: Tomi Valkeinen Cc: Florian Tobias Schandinat Cc: linux-fbdev@vger.kernel.org Cc: Felipe Balbi Cc: linux-usb@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/debug-leds.c | 2 +- arch/arm/plat-omap/fpga.h | 74 +++++++++++++ arch/arm/plat-omap/include/plat/fpga.h | 193 --------------------------------- 3 files changed, 75 insertions(+), 194 deletions(-) create mode 100644 arch/arm/plat-omap/fpga.h delete mode 100644 arch/arm/plat-omap/include/plat/fpga.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index ea29bbe8e5cf..feca128bc8ed 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -20,7 +20,7 @@ #include #include -#include +#include "fpga.h" /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the diff --git a/arch/arm/plat-omap/fpga.h b/arch/arm/plat-omap/fpga.h new file mode 100644 index 000000000000..54faaa93e6f4 --- /dev/null +++ b/arch/arm/plat-omap/fpga.h @@ -0,0 +1,74 @@ +/* + * arch/arm/plat-omap/include/mach/fpga.h + * + * Interrupt handler for OMAP-1510 FPGA + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: Greg Lonnon + * + * Copyright (C) 2002 MontaVista Software, Inc. + * + * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 + * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_FPGA_H +#define __ASM_ARCH_OMAP_FPGA_H + +/* + * --------------------------------------------------------------------------- + * H2/P2 Debug board FPGA + * --------------------------------------------------------------------------- + */ +/* maps in the FPGA registers and the ETHR registers */ +#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ +#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ +#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ + +#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) +#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ +#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ +#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ +#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ +#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ +#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ +#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ + +/* NOTE: most boards don't have a static mapping for the FPGA ... */ +struct h2p2_dbg_fpga { + /* offset 0x00 */ + u16 smc91x[8]; + /* offset 0x10 */ + u16 fpga_rev; + u16 board_rev; + u16 gpio_outputs; + u16 leds; + /* offset 0x18 */ + u16 misc_inputs; + u16 lan_status; + u16 lan_reset; + u16 reserved0; + /* offset 0x20 */ + u16 ps2_data; + u16 ps2_ctrl; + /* plus also 4 rs232 ports ... */ +}; + +/* LEDs definition on debug board (16 LEDs, all physically green) */ +#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) +#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) +#define H2P2_DBG_FPGA_LED_RED (1 << 13) +#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) +/* cpu0 load-meter LEDs */ +#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... +#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 +#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) + +#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) +#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) + +#endif diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h deleted file mode 100644 index bd3c6324ae1f..000000000000 --- a/arch/arm/plat-omap/include/plat/fpga.h +++ /dev/null @@ -1,193 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/fpga.h - * - * Interrupt handler for OMAP-1510 FPGA - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_FPGA_H -#define __ASM_ARCH_OMAP_FPGA_H - -extern void omap1510_fpga_init_irq(void); - -#define fpga_read(reg) __raw_readb(reg) -#define fpga_write(val, reg) __raw_writeb(val, reg) - -/* - * --------------------------------------------------------------------------- - * H2/P2 Debug board FPGA - * --------------------------------------------------------------------------- - */ -/* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ - -#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) -#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ -#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ -#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ -#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ -#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ -#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ -#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ - -/* NOTE: most boards don't have a static mapping for the FPGA ... */ -struct h2p2_dbg_fpga { - /* offset 0x00 */ - u16 smc91x[8]; - /* offset 0x10 */ - u16 fpga_rev; - u16 board_rev; - u16 gpio_outputs; - u16 leds; - /* offset 0x18 */ - u16 misc_inputs; - u16 lan_status; - u16 lan_reset; - u16 reserved0; - /* offset 0x20 */ - u16 ps2_data; - u16 ps2_ctrl; - /* plus also 4 rs232 ports ... */ -}; - -/* LEDs definition on debug board (16 LEDs, all physically green) */ -#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) -#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) -#define H2P2_DBG_FPGA_LED_RED (1 << 13) -#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) -/* cpu0 load-meter LEDs */ -#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... -#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 -#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) - -#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) -#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) - -/* - * --------------------------------------------------------------------------- - * OMAP-1510 FPGA - * --------------------------------------------------------------------------- - */ -#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */ -#define OMAP1510_FPGA_SIZE SZ_4K -#define OMAP1510_FPGA_START 0x08000000 /* PA */ - -/* Revision */ -#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0) -#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1) - -#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2) -#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3) -#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4) -#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5) - -/* Interrupt status */ -#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6) -#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7) - -/* Interrupt mask */ -#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8) -#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9) - -/* Reset registers */ -#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa) -#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb) - -#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc) -#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe) -#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf) -#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14) -#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15) -#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16) -#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18) -#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100) -#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101) -#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102) - -#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204) - -#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205) -#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206) -#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207) -#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208) -#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209) -#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a) -#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b) -#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c) -#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d) -#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e) -#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210) - -#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) - -/* - * Power up Giga UART driver, turn on HID clock. - * Turn off BT power, since we're not using it and it - * draws power. - */ -#define OMAP1510_FPGA_RESET_VALUE 0x42 - -#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) -#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) -#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) -#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) -#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) -#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) -#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) -#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) - -/* - * Innovator/OMAP1510 FPGA HID register bit definitions - */ -#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ -#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ -#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ -#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ -#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ -#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ -#define OMAP1510_FPGA_HID_rsrvd (1<<6) -#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ - -/* The FPGA IRQ is cascaded through GPIO_13 */ -#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) - -/* IRQ Numbers for interrupts muxed through the FPGA */ -#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) -#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) -#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) -#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) -#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) -#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) -#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) -#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) -#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) -#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) -#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) -#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) -#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) -#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) -#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) -#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) -#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) -#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) -#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) -#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) -#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) -#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) -#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) -#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) - -#endif -- cgit v1.2.3 From 54b693d46772f59fcfcb2cdd0f8b4bff2392b188 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 2 Oct 2012 13:39:28 -0700 Subject: ARM: OMAP1: Move plat/tc.h to mach/tc.h for omap1 We cannot keep this in plat as it causes problems with the ARM single zImage support. Cc: Felipe Balbi Cc: linux-pcmcia@lists.infradead.org Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 24 ++++++---- arch/arm/plat-omap/include/plat/tc.h | 89 ------------------------------------ 2 files changed, 14 insertions(+), 99 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/tc.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index b729623f2967..b4dcd92a5845 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -38,7 +38,6 @@ #include #include -#include /* * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA @@ -175,6 +174,7 @@ static inline void set_gdma_dev(int req, int dev) #define omap_writel(val, reg) do {} while (0) #endif +#ifdef CONFIG_ARCH_OMAP1 void omap_set_dma_priority(int lch, int dst_port, int priority) { unsigned long reg; @@ -203,18 +203,22 @@ void omap_set_dma_priority(int lch, int dst_port, int priority) l |= (priority & 0xf) << 8; omap_writel(l, reg); } +} +#endif - if (cpu_class_is_omap2()) { - u32 ccr; +#ifdef CONFIG_ARCH_OMAP2PLUS +void omap_set_dma_priority(int lch, int dst_port, int priority) +{ + u32 ccr; - ccr = p->dma_read(CCR, lch); - if (priority) - ccr |= (1 << 6); - else - ccr &= ~(1 << 6); - p->dma_write(ccr, CCR, lch); - } + ccr = p->dma_read(CCR, lch); + if (priority) + ccr |= (1 << 6); + else + ccr &= ~(1 << 6); + p->dma_write(ccr, CCR, lch); } +#endif EXPORT_SYMBOL(omap_set_dma_priority); void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/plat-omap/include/plat/tc.h deleted file mode 100644 index 1b4b2da86203..000000000000 --- a/arch/arm/plat-omap/include/plat/tc.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/tc.h - * - * OMAP Traffic Controller - * - * Copyright (C) 2004 Nokia Corporation - * Author: Imre Deak - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __ASM_ARCH_TC_H -#define __ASM_ARCH_TC_H - -#define TCMIF_BASE 0xfffecc00 -#define OMAP_TC_OCPT1_PRIOR (TCMIF_BASE + 0x00) -#define OMAP_TC_EMIFS_PRIOR (TCMIF_BASE + 0x04) -#define OMAP_TC_EMIFF_PRIOR (TCMIF_BASE + 0x08) -#define EMIFS_CONFIG (TCMIF_BASE + 0x0c) -#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10) -#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14) -#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18) -#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c) -#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20) -#define EMIFF_MRS (TCMIF_BASE + 0x24) -#define TC_TIMEOUT1 (TCMIF_BASE + 0x28) -#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c) -#define TC_TIMEOUT3 (TCMIF_BASE + 0x30) -#define TC_ENDIANISM (TCMIF_BASE + 0x34) -#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c) -#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40) -#define EMIFS_ACS0 (TCMIF_BASE + 0x50) -#define EMIFS_ACS1 (TCMIF_BASE + 0x54) -#define EMIFS_ACS2 (TCMIF_BASE + 0x58) -#define EMIFS_ACS3 (TCMIF_BASE + 0x5c) -#define OMAP_TC_OCPT2_PRIOR (TCMIF_BASE + 0xd0) - -/* external EMIFS chipselect regions */ -#define OMAP_CS0_PHYS 0x00000000 -#define OMAP_CS0_SIZE SZ_64M - -#define OMAP_CS1_PHYS 0x04000000 -#define OMAP_CS1_SIZE SZ_64M - -#define OMAP_CS1A_PHYS OMAP_CS1_PHYS -#define OMAP_CS1A_SIZE SZ_32M - -#define OMAP_CS1B_PHYS (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE) -#define OMAP_CS1B_SIZE SZ_32M - -#define OMAP_CS2_PHYS 0x08000000 -#define OMAP_CS2_SIZE SZ_64M - -#define OMAP_CS2A_PHYS OMAP_CS2_PHYS -#define OMAP_CS2A_SIZE SZ_32M - -#define OMAP_CS2B_PHYS (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE) -#define OMAP_CS2B_SIZE SZ_32M - -#define OMAP_CS3_PHYS 0x0c000000 -#define OMAP_CS3_SIZE SZ_64M - -#ifndef __ASSEMBLER__ - -/* EMIF Slow Interface Configuration Register */ -#define OMAP_EMIFS_CONFIG_FR (1 << 4) -#define OMAP_EMIFS_CONFIG_PDE (1 << 3) -#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2) -#define OMAP_EMIFS_CONFIG_BM (1 << 1) -#define OMAP_EMIFS_CONFIG_WP (1 << 0) - -#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n))) -#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n))) - -#endif /* __ASSEMBLER__ */ - -#endif /* __ASM_ARCH_TC_H */ -- cgit v1.2.3 From 3a8761c0272c961c707e5af2eb0179adf3ef7e14 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 8 Oct 2012 09:11:22 -0700 Subject: ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2 There's no need to keep the device related things in the common i2c.c as omap2+ is using hwmod. Split the code to mach-omap1 and mach-omap2 parts and only leave common code to plat-omap/i2c.c. Note that as omap1 only has one i2c controller, we can now remove the old device related macros. Reviewed-by: Shubhrajyoti D Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/i2c.c | 133 ++----------------------------- arch/arm/plat-omap/i2c.h | 47 +++++++++++ arch/arm/plat-omap/include/plat/common.h | 1 - arch/arm/plat-omap/include/plat/i2c.h | 59 -------------- 4 files changed, 52 insertions(+), 188 deletions(-) create mode 100644 arch/arm/plat-omap/i2c.h delete mode 100644 arch/arm/plat-omap/include/plat/i2c.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index a5683a84c6ee..37597a6bbed2 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,52 +26,18 @@ #include #include #include +#include #include #include #include #include -#include -#include +#include -#define OMAP_I2C_SIZE 0x3f -#define OMAP1_I2C_BASE 0xfffb3800 -#define OMAP1_INT_I2C (32 + 4) +#include "i2c.h" -static const char name[] = "omap_i2c"; - -#define I2C_RESOURCE_BUILDER(base, irq) \ - { \ - .start = (base), \ - .end = (base) + OMAP_I2C_SIZE, \ - .flags = IORESOURCE_MEM, \ - }, \ - { \ - .start = (irq), \ - .flags = IORESOURCE_IRQ, \ - }, - -static struct resource i2c_resources[][2] = { - { I2C_RESOURCE_BUILDER(0, 0) }, -}; - -#define I2C_DEV_BUILDER(bus_id, res, data) \ - { \ - .id = (bus_id), \ - .name = name, \ - .num_resources = ARRAY_SIZE(res), \ - .resource = (res), \ - .dev = { \ - .platform_data = (data), \ - }, \ - } - -#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16 #define OMAP_I2C_MAX_CONTROLLERS 4 static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS]; -static struct platform_device omap_i2c_devices[] = { - I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]), -}; #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) @@ -91,95 +57,6 @@ static int __init omap_i2c_nr_ports(void) return ports; } -static inline int omap1_i2c_add_bus(int bus_id) -{ - struct platform_device *pdev; - struct omap_i2c_bus_platform_data *pdata; - struct resource *res; - - omap1_i2c_mux_pins(bus_id); - - pdev = &omap_i2c_devices[bus_id - 1]; - res = pdev->resource; - res[0].start = OMAP1_I2C_BASE; - res[0].end = res[0].start + OMAP_I2C_SIZE; - res[1].start = OMAP1_INT_I2C; - pdata = &i2c_pdata[bus_id - 1]; - - /* all OMAP1 have IP version 1 register set */ - pdata->rev = OMAP_I2C_IP_VERSION_1; - - /* all OMAP1 I2C are implemented like this */ - pdata->flags = OMAP_I2C_FLAG_NO_FIFO | - OMAP_I2C_FLAG_SIMPLE_CLOCK | - OMAP_I2C_FLAG_16BIT_DATA_REG | - OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK; - - /* how the cpu bus is wired up differs for 7xx only */ - - if (cpu_is_omap7xx()) - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1; - else - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; - - return platform_device_register(pdev); -} - - -#ifdef CONFIG_ARCH_OMAP2PLUS -static inline int omap2_i2c_add_bus(int bus_id) -{ - int l; - struct omap_hwmod *oh; - struct platform_device *pdev; - char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN]; - struct omap_i2c_bus_platform_data *pdata; - struct omap_i2c_dev_attr *dev_attr; - - omap2_i2c_mux_pins(bus_id); - - l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id); - WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN, - "String buffer overflow in I2C%d device setup\n", bus_id); - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return -EEXIST; - } - - pdata = &i2c_pdata[bus_id - 1]; - /* - * pass the hwmod class's CPU-specific knowledge of I2C IP revision in - * use, and functionality implementation flags, up to the OMAP I2C - * driver via platform data - */ - pdata->rev = oh->class->rev; - - dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; - pdata->flags = dev_attr->flags; - - pdev = omap_device_build(name, bus_id, oh, pdata, - sizeof(struct omap_i2c_bus_platform_data), - NULL, 0, 0); - WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); - - return PTR_RET(pdev); -} -#else -static inline int omap2_i2c_add_bus(int bus_id) -{ - return 0; -} -#endif - -static int __init omap_i2c_add_bus(int bus_id) -{ - if (cpu_class_is_omap1()) - return omap1_i2c_add_bus(bus_id); - else - return omap2_i2c_add_bus(bus_id); -} - /** * omap_i2c_bus_setup - Process command line options for the I2C bus speed * @str: String of options @@ -218,7 +95,7 @@ static int __init omap_register_i2c_bus_cmdline(void) for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++) if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) { i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; - err = omap_i2c_add_bus(i + 1); + err = omap_i2c_add_bus(&i2c_pdata[i], i + 1); if (err) goto out; } @@ -256,5 +133,5 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; - return omap_i2c_add_bus(bus_id); + return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id); } diff --git a/arch/arm/plat-omap/i2c.h b/arch/arm/plat-omap/i2c.h new file mode 100644 index 000000000000..7a9028cb5a75 --- /dev/null +++ b/arch/arm/plat-omap/i2c.h @@ -0,0 +1,47 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __PLAT_OMAP_I2C_H +#define __PLAT_OMAP_I2C_H + +struct i2c_board_info; +struct omap_i2c_bus_platform_data; + +int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, + int bus_id); + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) +extern int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); +#else +static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + return 0; +} +#endif + +struct omap_hwmod; +int omap_i2c_reset(struct omap_hwmod *oh); + +#endif /* __PLAT_OMAP_I2C_H */ diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index d1cb6f527b7e..55c0f8bfc85b 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -27,7 +27,6 @@ #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H #define __ARCH_ARM_MACH_OMAP_COMMON_H -#include #include extern int __init omap_init_clocksource_32k(void __iomem *vbase); diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h deleted file mode 100644 index 7c22b9e10dc3..000000000000 --- a/arch/arm/plat-omap/include/plat/i2c.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Helper module for board specific I2C bus registration - * - * Copyright (C) 2009 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ -#ifndef __ASM__ARCH_OMAP_I2C_H -#define __ASM__ARCH_OMAP_I2C_H - -#include -#include - -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) -extern int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len); -#else -static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len) -{ - return 0; -} -#endif - -/** - * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod - * @fifo_depth: total controller FIFO size (in bytes) - * @flags: differences in hardware support capability - * - * @fifo_depth represents what exists on the hardware, not what is - * actually configured at runtime by the device driver. - */ -struct omap_i2c_dev_attr { - u8 fifo_depth; - u32 flags; -}; - -void __init omap1_i2c_mux_pins(int bus_id); -void __init omap2_i2c_mux_pins(int bus_id); - -struct omap_hwmod; -int omap_i2c_reset(struct omap_hwmod *oh); - -#endif /* __ASM__ARCH_OMAP_I2C_H */ -- cgit v1.2.3 From e6a6e5ad17ee090f8d48a3b0758338a97124539f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 27 Sep 2012 17:11:15 -0700 Subject: ARM: OMAP: Make plat/common.h local to mach-omap1 and mach-omap2 We cannot keep this in plat/common.h for common zImage support. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/common.c | 2 +- arch/arm/plat-omap/common.h | 38 +++++++++++++++++++++++++++++ arch/arm/plat-omap/counter_32k.c | 2 +- arch/arm/plat-omap/include/plat/common.h | 41 -------------------------------- 4 files changed, 40 insertions(+), 43 deletions(-) create mode 100644 arch/arm/plat-omap/common.h delete mode 100644 arch/arm/plat-omap/include/plat/common.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index b388e87b522b..2a9db0128a96 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -16,7 +16,7 @@ #include #include -#include +#include "common.h" #include #include #include diff --git a/arch/arm/plat-omap/common.h b/arch/arm/plat-omap/common.h new file mode 100644 index 000000000000..e196d1300157 --- /dev/null +++ b/arch/arm/plat-omap/common.h @@ -0,0 +1,38 @@ +/* + * Header for shared OMAP code in plat-omap. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H +#define __ARCH_ARM_MACH_OMAP_COMMON_H + +extern int __init omap_init_clocksource_32k(void __iomem *vbase); + +extern void __init omap_check_revision(void); + +extern void omap_reserve(void); +struct omap_hwmod; +extern int omap_dss_reset(struct omap_hwmod *); + +void omap_sram_init(void); + +#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 87ba8dd0d791..8e847de4c744 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -22,7 +22,7 @@ #include #include -#include +#include "common.h" #include /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h deleted file mode 100644 index 55c0f8bfc85b..000000000000 --- a/arch/arm/plat-omap/include/plat/common.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/common.h - * - * Header for code common to all OMAP machines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H -#define __ARCH_ARM_MACH_OMAP_COMMON_H - -#include - -extern int __init omap_init_clocksource_32k(void __iomem *vbase); - -extern void __init omap_check_revision(void); - -extern void omap_reserve(void); -extern int omap_dss_reset(struct omap_hwmod *); - -void omap_sram_init(void); - -#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ -- cgit v1.2.3 From a8f7445c7b0d2b7a523e521e2d14974804910ad0 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 2 Oct 2012 14:12:31 -0700 Subject: ARM: OMAP: Move plat/led.h to include/linux/platform_data We need to move this away from plat for ARM common zImage support. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/led.h | 24 ------------------------ 1 file changed, 24 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/led.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/led.h b/arch/arm/plat-omap/include/plat/led.h deleted file mode 100644 index 25e451e7e2fd..000000000000 --- a/arch/arm/plat-omap/include/plat/led.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/led.h - * - * Copyright (C) 2006 Samsung Electronics - * Kyungmin Park - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_LED_H -#define ASMARM_ARCH_LED_H - -struct omap_led_config { - struct led_classdev cdev; - s16 gpio; -}; - -struct omap_led_platform_data { - s16 nr_leds; - struct omap_led_config *leds; -}; - -#endif -- cgit v1.2.3 From 622297fdec22310d57cc3222a8fc337993c7cd23 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 2 Oct 2012 14:19:52 -0700 Subject: ARM: OMAP: Make plat/sram.h local to plat-omap We can move this from plat to be local to plat-omap for common ARM zImage support. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/common.h | 2 - arch/arm/plat-omap/include/plat/sram.h | 105 ------------------------------- arch/arm/plat-omap/sram.c | 1 - arch/arm/plat-omap/sram.h | 109 +++++++++++++++++++++++++++++++-- 4 files changed, 105 insertions(+), 112 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/sram.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/common.h b/arch/arm/plat-omap/common.h index e196d1300157..8ae0542a37d9 100644 --- a/arch/arm/plat-omap/common.h +++ b/arch/arm/plat-omap/common.h @@ -33,6 +33,4 @@ extern void omap_reserve(void); struct omap_hwmod; extern int omap_dss_reset(struct omap_hwmod *); -void omap_sram_init(void); - #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h deleted file mode 100644 index 227ae2657554..000000000000 --- a/arch/arm/plat-omap/include/plat/sram.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/sram.h - * - * Interface for functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - -#ifndef __ASSEMBLY__ -#include - -extern void *omap_sram_push_address(unsigned long size); - -/* Macro to push a function to the internal SRAM, using the fncpy API */ -#define omap_sram_push(funcp, size) ({ \ - typeof(&(funcp)) _res = NULL; \ - void *_sram_address = omap_sram_push_address(size); \ - if (_sram_address) \ - _res = fncpy(_sram_address, &(funcp), size); \ - _res; \ -}) - -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); - -extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -extern u32 omap3_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern void omap3_sram_restore_context(void); - -/* Do not use these */ -extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap1_sram_reprogram_clock_sz; - -extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap24xx_sram_reprogram_clock_sz; - -extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap242x_sram_ddr_init_sz; - -extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap242x_sram_set_prcm_sz; - -extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap242x_sram_reprogram_sdrc_sz; - - -extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap243x_sram_ddr_init_sz; - -extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap243x_sram_set_prcm_sz; - -extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -extern u32 omap3_sram_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern unsigned long omap3_sram_configure_core_dpll_sz; - -#ifdef CONFIG_PM -extern void omap_push_sram_idle(void); -#else -static inline void omap_push_sram_idle(void) {} -#endif /* CONFIG_PM */ - -#endif /* __ASSEMBLY__ */ - -/* - * OMAP2+: define the SRAM PA addresses. - * Used by the SRAM management code and the idle sleep code. - */ -#define OMAP2_SRAM_PA 0x40200000 -#define OMAP3_SRAM_PA 0x40200000 -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PA 0x40304000 -#define OMAP4_SRAM_VA 0xfe404000 -#else -#define OMAP4_SRAM_PA 0x40300000 -#endif -#define AM33XX_SRAM_PA 0x40300000 -#endif diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 28acb383e7df..dc2d800d9598 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -25,7 +25,6 @@ #include -#include #include #include "sram.h" diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h index 29b43ef97f20..cefda2e09869 100644 --- a/arch/arm/plat-omap/sram.h +++ b/arch/arm/plat-omap/sram.h @@ -1,6 +1,107 @@ -#ifndef __PLAT_OMAP_SRAM_H__ -#define __PLAT_OMAP_SRAM_H__ +/* + * arch/arm/plat-omap/include/mach/sram.h + * + * Interface for functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ -extern int __init omap_sram_init(void); +#ifndef __ARCH_ARM_OMAP_SRAM_H +#define __ARCH_ARM_OMAP_SRAM_H -#endif /* __PLAT_OMAP_SRAM_H__ */ +#ifndef __ASSEMBLY__ +#include + +int __init omap_sram_init(void); + +extern void *omap_sram_push_address(unsigned long size); + +/* Macro to push a function to the internal SRAM, using the fncpy API */ +#define omap_sram_push(funcp, size) ({ \ + typeof(&(funcp)) _res = NULL; \ + void *_sram_address = omap_sram_push_address(size); \ + if (_sram_address) \ + _res = fncpy(_sram_address, &(funcp), size); \ + _res; \ +}) + +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +extern u32 omap3_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern void omap3_sram_restore_context(void); + +/* Do not use these */ +extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap1_sram_reprogram_clock_sz; + +extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap24xx_sram_reprogram_clock_sz; + +extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap242x_sram_ddr_init_sz; + +extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap242x_sram_set_prcm_sz; + +extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap242x_sram_reprogram_sdrc_sz; + + +extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap243x_sram_ddr_init_sz; + +extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap243x_sram_set_prcm_sz; + +extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap243x_sram_reprogram_sdrc_sz; + +extern u32 omap3_sram_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern unsigned long omap3_sram_configure_core_dpll_sz; + +#ifdef CONFIG_PM +extern void omap_push_sram_idle(void); +#else +static inline void omap_push_sram_idle(void) {} +#endif /* CONFIG_PM */ + +#endif /* __ASSEMBLY__ */ + +/* + * OMAP2+: define the SRAM PA addresses. + * Used by the SRAM management code and the idle sleep code. + */ +#define OMAP2_SRAM_PA 0x40200000 +#define OMAP3_SRAM_PA 0x40200000 +#ifdef CONFIG_OMAP4_ERRATA_I688 +#define OMAP4_SRAM_PA 0x40304000 +#define OMAP4_SRAM_VA 0xfe404000 +#else +#define OMAP4_SRAM_PA 0x40300000 +#endif +#define AM33XX_SRAM_PA 0x40300000 +#endif -- cgit v1.2.3 From 25c7d49ed48b4843da7dea56a81ae7f620211ee0 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 2 Oct 2012 17:25:48 -0700 Subject: ARM: OMAP: Make omap_device local to mach-omap2 Let's make omap_device local to mach-omap2 for ARM common zImage support. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/Makefile | 1 - arch/arm/plat-omap/include/plat/omap_device.h | 176 ---- arch/arm/plat-omap/omap-pm-noop.c | 3 +- arch/arm/plat-omap/omap_device.c | 1278 ------------------------- 4 files changed, 2 insertions(+), 1456 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/omap_device.h delete mode 100644 arch/arm/plat-omap/omap_device.c (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index dacaee009a4e..9c81cf539218 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -9,7 +9,6 @@ obj-n := obj- := # omap_device support (OMAP2+ only at the moment) -obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h deleted file mode 100644 index 106f50665804..000000000000 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * omap_device headers - * - * Copyright (C) 2009 Nokia Corporation - * Paul Walmsley - * - * Developed in collaboration with (alphabetical order): Benoit - * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram - * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard - * Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Eventually this type of functionality should either be - * a) implemented via arch-specific pointers in platform_device - * or - * b) implemented as a proper omap_bus/omap_device in Linux, no more - * platform_device - * - * omap_device differs from omap_hwmod in that it includes external - * (e.g., board- and system-level) integration details. omap_hwmod - * stores hardware data that is invariant for a given OMAP chip. - * - * To do: - * - GPIO integration - * - regulator integration - * - */ -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H - -#include -#include - -#include - -extern struct dev_pm_domain omap_device_pm_domain; - -/* omap_device._state values */ -#define OMAP_DEVICE_STATE_UNKNOWN 0 -#define OMAP_DEVICE_STATE_ENABLED 1 -#define OMAP_DEVICE_STATE_IDLE 2 -#define OMAP_DEVICE_STATE_SHUTDOWN 3 - -/* omap_device.flags values */ -#define OMAP_DEVICE_SUSPENDED BIT(0) -#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1) - -/** - * struct omap_device - omap_device wrapper for platform_devices - * @pdev: platform_device - * @hwmods: (one .. many per omap_device) - * @hwmods_cnt: ARRAY_SIZE() of @hwmods - * @pm_lats: ptr to an omap_device_pm_latency table - * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats - * @pm_lat_level: array index of the last odpl entry executed - -1 if never - * @dev_wakeup_lat: dev wakeup latency in nanoseconds - * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM - * @_state: one of OMAP_DEVICE_STATE_* (see above) - * @flags: device flags - * @_driver_status: one of BUS_NOTIFY_*_DRIVER from - * - * Integrates omap_hwmod data into Linux platform_device. - * - * Field names beginning with underscores are for the internal use of - * the omap_device code. - * - */ -struct omap_device { - struct platform_device *pdev; - struct omap_hwmod **hwmods; - struct omap_device_pm_latency *pm_lats; - u32 dev_wakeup_lat; - u32 _dev_wakeup_lat_limit; - unsigned long _driver_status; - u8 pm_lats_cnt; - s8 pm_lat_level; - u8 hwmods_cnt; - u8 _state; - u8 flags; -}; - -/* Device driver interface (call via platform_data fn ptrs) */ - -int omap_device_enable(struct platform_device *pdev); -int omap_device_idle(struct platform_device *pdev); -int omap_device_shutdown(struct platform_device *pdev); - -/* Core code interface */ - -struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, - struct omap_hwmod *oh, void *pdata, - int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt, int is_early_device); - -struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, - struct omap_hwmod **oh, int oh_cnt, - void *pdata, int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt, int is_early_device); - -struct omap_device *omap_device_alloc(struct platform_device *pdev, - struct omap_hwmod **ohs, int oh_cnt, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt); -void omap_device_delete(struct omap_device *od); -int omap_device_register(struct platform_device *pdev); - -void __iomem *omap_device_get_rt_va(struct omap_device *od); -struct device *omap_device_get_by_hwmod_name(const char *oh_name); - -/* OMAP PM interface */ -int omap_device_align_pm_lat(struct platform_device *pdev, - u32 new_wakeup_lat_limit); -struct powerdomain *omap_device_get_pwrdm(struct omap_device *od); -int omap_device_get_context_loss_count(struct platform_device *pdev); - -/* Other */ - -int omap_device_assert_hardreset(struct platform_device *pdev, - const char *name); -int omap_device_deassert_hardreset(struct platform_device *pdev, - const char *name); -int omap_device_idle_hwmods(struct omap_device *od); -int omap_device_enable_hwmods(struct omap_device *od); - -int omap_device_disable_clocks(struct omap_device *od); -int omap_device_enable_clocks(struct omap_device *od); - -/* - * Entries should be kept in latency order ascending - * - * deact_lat is the maximum number of microseconds required to complete - * deactivate_func() at the device's slowest OPP. - * - * act_lat is the maximum number of microseconds required to complete - * activate_func() at the device's slowest OPP. - * - * This will result in some suboptimal power management decisions at fast - * OPPs, but avoids having to recompute all device power management decisions - * if the system shifts from a fast OPP to a slow OPP (in order to meet - * latency requirements). - * - * XXX should deactivate_func/activate_func() take platform_device pointers - * rather than omap_device pointers? - */ -struct omap_device_pm_latency { - u32 deactivate_lat; - u32 deactivate_lat_worst; - int (*deactivate_func)(struct omap_device *od); - u32 activate_lat; - u32 activate_lat_worst; - int (*activate_func)(struct omap_device *od); - u32 flags; -}; - -#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1) - -/* Get omap_device pointer from platform_device pointer */ -static inline struct omap_device *to_omap_device(struct platform_device *pdev) -{ - return pdev ? pdev->archdata.od : NULL; -} - -static inline -void omap_device_disable_idle_on_suspend(struct platform_device *pdev) -{ - struct omap_device *od = to_omap_device(pdev); - - od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND; -} - -#endif diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index 9722f418ae1f..3c96b567370e 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -24,7 +24,8 @@ /* Interface documentation is in mach/omap-pm.h */ #include -#include + +#include "../mach-omap2/omap_device.h" static bool off_mode_enabled; static int dummy_context_loss_counter; diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c deleted file mode 100644 index 7a7d1f2a65e9..000000000000 --- a/arch/arm/plat-omap/omap_device.c +++ /dev/null @@ -1,1278 +0,0 @@ -/* - * omap_device implementation - * - * Copyright (C) 2009-2010 Nokia Corporation - * Paul Walmsley, Kevin Hilman - * - * Developed in collaboration with (alphabetical order): Benoit - * Cousson, Thara Gopinath, Tony Lindgren, Rajendra Nayak, Vikram - * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard - * Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This code provides a consistent interface for OMAP device drivers - * to control power management and interconnect properties of their - * devices. - * - * In the medium- to long-term, this code should either be - * a) implemented via arch-specific pointers in platform_data - * or - * b) implemented as a proper omap_bus/omap_device in Linux, no more - * platform_data func pointers - * - * - * Guidelines for usage by driver authors: - * - * 1. These functions are intended to be used by device drivers via - * function pointers in struct platform_data. As an example, - * omap_device_enable() should be passed to the driver as - * - * struct foo_driver_platform_data { - * ... - * int (*device_enable)(struct platform_device *pdev); - * ... - * } - * - * Note that the generic "device_enable" name is used, rather than - * "omap_device_enable". This is so other architectures can pass in their - * own enable/disable functions here. - * - * This should be populated during device setup: - * - * ... - * pdata->device_enable = omap_device_enable; - * ... - * - * 2. Drivers should first check to ensure the function pointer is not null - * before calling it, as in: - * - * if (pdata->device_enable) - * pdata->device_enable(pdev); - * - * This allows other architectures that don't use similar device_enable()/ - * device_shutdown() functions to execute normally. - * - * ... - * - * Suggested usage by device drivers: - * - * During device initialization: - * device_enable() - * - * During device idle: - * (save remaining device context if necessary) - * device_idle(); - * - * During device resume: - * device_enable(); - * (restore context if necessary) - * - * During device shutdown: - * device_shutdown() - * (device must be reinitialized at this point to use it again) - * - */ -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -/* These parameters are passed to _omap_device_{de,}activate() */ -#define USE_WAKEUP_LAT 0 -#define IGNORE_WAKEUP_LAT 1 - -static int omap_early_device_register(struct platform_device *pdev); - -static struct omap_device_pm_latency omap_default_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - } -}; - -/* Private functions */ - -/** - * _omap_device_activate - increase device readiness - * @od: struct omap_device * - * @ignore_lat: increase to latency target (0) or full readiness (1)? - * - * Increase readiness of omap_device @od (thus decreasing device - * wakeup latency, but consuming more power). If @ignore_lat is - * IGNORE_WAKEUP_LAT, make the omap_device fully active. Otherwise, - * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup - * latency is greater than the requested maximum wakeup latency, step - * backwards in the omap_device_pm_latency table to ensure the - * device's maximum wakeup latency is less than or equal to the - * requested maximum wakeup latency. Returns 0. - */ -static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) -{ - struct timespec a, b, c; - - dev_dbg(&od->pdev->dev, "omap_device: activating\n"); - - while (od->pm_lat_level > 0) { - struct omap_device_pm_latency *odpl; - unsigned long long act_lat = 0; - - od->pm_lat_level--; - - odpl = od->pm_lats + od->pm_lat_level; - - if (!ignore_lat && - (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit)) - break; - - read_persistent_clock(&a); - - /* XXX check return code */ - odpl->activate_func(od); - - read_persistent_clock(&b); - - c = timespec_sub(b, a); - act_lat = timespec_to_ns(&c); - - dev_dbg(&od->pdev->dev, - "omap_device: pm_lat %d: activate: elapsed time %llu nsec\n", - od->pm_lat_level, act_lat); - - if (act_lat > odpl->activate_lat) { - odpl->activate_lat_worst = act_lat; - if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { - odpl->activate_lat = act_lat; - dev_dbg(&od->pdev->dev, - "new worst case activate latency %d: %llu\n", - od->pm_lat_level, act_lat); - } else - dev_warn(&od->pdev->dev, - "activate latency %d higher than expected. (%llu > %d)\n", - od->pm_lat_level, act_lat, - odpl->activate_lat); - } - - od->dev_wakeup_lat -= odpl->activate_lat; - } - - return 0; -} - -/** - * _omap_device_deactivate - decrease device readiness - * @od: struct omap_device * - * @ignore_lat: decrease to latency target (0) or full inactivity (1)? - * - * Decrease readiness of omap_device @od (thus increasing device - * wakeup latency, but conserving power). If @ignore_lat is - * IGNORE_WAKEUP_LAT, make the omap_device fully inactive. Otherwise, - * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup - * latency is less than the requested maximum wakeup latency, step - * forwards in the omap_device_pm_latency table to ensure the device's - * maximum wakeup latency is less than or equal to the requested - * maximum wakeup latency. Returns 0. - */ -static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) -{ - struct timespec a, b, c; - - dev_dbg(&od->pdev->dev, "omap_device: deactivating\n"); - - while (od->pm_lat_level < od->pm_lats_cnt) { - struct omap_device_pm_latency *odpl; - unsigned long long deact_lat = 0; - - odpl = od->pm_lats + od->pm_lat_level; - - if (!ignore_lat && - ((od->dev_wakeup_lat + odpl->activate_lat) > - od->_dev_wakeup_lat_limit)) - break; - - read_persistent_clock(&a); - - /* XXX check return code */ - odpl->deactivate_func(od); - - read_persistent_clock(&b); - - c = timespec_sub(b, a); - deact_lat = timespec_to_ns(&c); - - dev_dbg(&od->pdev->dev, - "omap_device: pm_lat %d: deactivate: elapsed time %llu nsec\n", - od->pm_lat_level, deact_lat); - - if (deact_lat > odpl->deactivate_lat) { - odpl->deactivate_lat_worst = deact_lat; - if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { - odpl->deactivate_lat = deact_lat; - dev_dbg(&od->pdev->dev, - "new worst case deactivate latency %d: %llu\n", - od->pm_lat_level, deact_lat); - } else - dev_warn(&od->pdev->dev, - "deactivate latency %d higher than expected. (%llu > %d)\n", - od->pm_lat_level, deact_lat, - odpl->deactivate_lat); - } - - od->dev_wakeup_lat += odpl->activate_lat; - - od->pm_lat_level++; - } - - return 0; -} - -static void _add_clkdev(struct omap_device *od, const char *clk_alias, - const char *clk_name) -{ - struct clk *r; - struct clk_lookup *l; - - if (!clk_alias || !clk_name) - return; - - dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name); - - r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias); - if (!IS_ERR(r)) { - dev_warn(&od->pdev->dev, - "alias %s already exists\n", clk_alias); - clk_put(r); - return; - } - - r = clk_get(NULL, clk_name); - if (IS_ERR(r)) { - dev_err(&od->pdev->dev, - "clk_get for %s failed\n", clk_name); - return; - } - - l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev)); - if (!l) { - dev_err(&od->pdev->dev, - "clkdev_alloc for %s failed\n", clk_alias); - return; - } - - clkdev_add(l); -} - -/** - * _add_hwmod_clocks_clkdev - Add clkdev entry for hwmod optional clocks - * and main clock - * @od: struct omap_device *od - * @oh: struct omap_hwmod *oh - * - * For the main clock and every optional clock present per hwmod per - * omap_device, this function adds an entry in the clkdev table of the - * form if it does not exist already. - * - * The function is called from inside omap_device_build_ss(), after - * omap_device_register. - * - * This allows drivers to get a pointer to its optional clocks based on its role - * by calling clk_get(, ). - * In the case of the main clock, a "fck" alias is used. - * - * No return value. - */ -static void _add_hwmod_clocks_clkdev(struct omap_device *od, - struct omap_hwmod *oh) -{ - int i; - - _add_clkdev(od, "fck", oh->main_clk); - - for (i = 0; i < oh->opt_clks_cnt; i++) - _add_clkdev(od, oh->opt_clks[i].role, oh->opt_clks[i].clk); -} - - -/** - * omap_device_build_from_dt - build an omap_device with multiple hwmods - * @pdev_name: name of the platform_device driver to use - * @pdev_id: this platform_device's connection ID - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata - * @pm_lats: pointer to a omap_device_pm_latency array for this device - * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats - * @is_early_device: should the device be registered as an early device or not - * - * Function for building an omap_device already registered from device-tree - * - * Returns 0 or PTR_ERR() on error. - */ -static int omap_device_build_from_dt(struct platform_device *pdev) -{ - struct omap_hwmod **hwmods; - struct omap_device *od; - struct omap_hwmod *oh; - struct device_node *node = pdev->dev.of_node; - const char *oh_name; - int oh_cnt, i, ret = 0; - - oh_cnt = of_property_count_strings(node, "ti,hwmods"); - if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) { - dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n"); - return -ENODEV; - } - - hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL); - if (!hwmods) { - ret = -ENOMEM; - goto odbfd_exit; - } - - for (i = 0; i < oh_cnt; i++) { - of_property_read_string_index(node, "ti,hwmods", i, &oh_name); - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n", - oh_name); - ret = -EINVAL; - goto odbfd_exit1; - } - hwmods[i] = oh; - } - - od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0); - if (!od) { - dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n", - oh_name); - ret = PTR_ERR(od); - goto odbfd_exit1; - } - - /* Fix up missing resource names */ - for (i = 0; i < pdev->num_resources; i++) { - struct resource *r = &pdev->resource[i]; - - if (r->name == NULL) - r->name = dev_name(&pdev->dev); - } - - if (of_get_property(node, "ti,no_idle_on_suspend", NULL)) - omap_device_disable_idle_on_suspend(pdev); - - pdev->dev.pm_domain = &omap_device_pm_domain; - -odbfd_exit1: - kfree(hwmods); -odbfd_exit: - return ret; -} - -static int _omap_device_notifier_call(struct notifier_block *nb, - unsigned long event, void *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od; - - switch (event) { - case BUS_NOTIFY_DEL_DEVICE: - if (pdev->archdata.od) - omap_device_delete(pdev->archdata.od); - break; - case BUS_NOTIFY_ADD_DEVICE: - if (pdev->dev.of_node) - omap_device_build_from_dt(pdev); - /* fall through */ - default: - od = to_omap_device(pdev); - if (od) - od->_driver_status = event; - } - - return NOTIFY_DONE; -} - - -/* Public functions for use by core code */ - -/** - * omap_device_get_context_loss_count - get lost context count - * @od: struct omap_device * - * - * Using the primary hwmod, query the context loss count for this - * device. - * - * Callers should consider context for this device lost any time this - * function returns a value different than the value the caller got - * the last time it called this function. - * - * If any hwmods exist for the omap_device assoiated with @pdev, - * return the context loss counter for that hwmod, otherwise return - * zero. - */ -int omap_device_get_context_loss_count(struct platform_device *pdev) -{ - struct omap_device *od; - u32 ret = 0; - - od = to_omap_device(pdev); - - if (od->hwmods_cnt) - ret = omap_hwmod_get_context_loss_count(od->hwmods[0]); - - return ret; -} - -/** - * omap_device_count_resources - count number of struct resource entries needed - * @od: struct omap_device * - * - * Count the number of struct resource entries needed for this - * omap_device @od. Used by omap_device_build_ss() to determine how - * much memory to allocate before calling - * omap_device_fill_resources(). Returns the count. - */ -static int omap_device_count_resources(struct omap_device *od) -{ - int c = 0; - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - c += omap_hwmod_count_resources(od->hwmods[i]); - - pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n", - od->pdev->name, c, od->hwmods_cnt); - - return c; -} - -/** - * omap_device_fill_resources - fill in array of struct resource - * @od: struct omap_device * - * @res: pointer to an array of struct resource to be filled in - * - * Populate one or more empty struct resource pointed to by @res with - * the resource data for this omap_device @od. Used by - * omap_device_build_ss() after calling omap_device_count_resources(). - * Ideally this function would not be needed at all. If omap_device - * replaces platform_device, then we can specify our own - * get_resource()/ get_irq()/etc functions that use the underlying - * omap_hwmod information. Or if platform_device is extended to use - * subarchitecture-specific function pointers, the various - * platform_device functions can simply call omap_device internal - * functions to get device resources. Hacking around the existing - * platform_device code wastes memory. Returns 0. - */ -static int omap_device_fill_resources(struct omap_device *od, - struct resource *res) -{ - int i, r; - - for (i = 0; i < od->hwmods_cnt; i++) { - r = omap_hwmod_fill_resources(od->hwmods[i], res); - res += r; - } - - return 0; -} - -/** - * _od_fill_dma_resources - fill in array of struct resource with dma resources - * @od: struct omap_device * - * @res: pointer to an array of struct resource to be filled in - * - * Populate one or more empty struct resource pointed to by @res with - * the dma resource data for this omap_device @od. Used by - * omap_device_alloc() after calling omap_device_count_resources(). - * - * Ideally this function would not be needed at all. If we have - * mechanism to get dma resources from DT. - * - * Returns 0. - */ -static int _od_fill_dma_resources(struct omap_device *od, - struct resource *res) -{ - int i, r; - - for (i = 0; i < od->hwmods_cnt; i++) { - r = omap_hwmod_fill_dma_resources(od->hwmods[i], res); - res += r; - } - - return 0; -} - -/** - * omap_device_alloc - allocate an omap_device - * @pdev: platform_device that will be included in this omap_device - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata - * @pm_lats: pointer to a omap_device_pm_latency array for this device - * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats - * - * Convenience function for allocating an omap_device structure and filling - * hwmods, resources and pm_latency attributes. - * - * Returns an struct omap_device pointer or ERR_PTR() on error; - */ -struct omap_device *omap_device_alloc(struct platform_device *pdev, - struct omap_hwmod **ohs, int oh_cnt, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt) -{ - int ret = -ENOMEM; - struct omap_device *od; - struct resource *res = NULL; - int i, res_count; - struct omap_hwmod **hwmods; - - od = kzalloc(sizeof(struct omap_device), GFP_KERNEL); - if (!od) { - ret = -ENOMEM; - goto oda_exit1; - } - od->hwmods_cnt = oh_cnt; - - hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL); - if (!hwmods) - goto oda_exit2; - - od->hwmods = hwmods; - od->pdev = pdev; - - res_count = omap_device_count_resources(od); - /* - * DT Boot: - * OF framework will construct the resource structure (currently - * does for MEM & IRQ resource) and we should respect/use these - * resources, killing hwmod dependency. - * If pdev->num_resources > 0, we assume that MEM & IRQ resources - * have been allocated by OF layer already (through DTB). - * - * Non-DT Boot: - * Here, pdev->num_resources = 0, and we should get all the - * resources from hwmod. - * - * TODO: Once DMA resource is available from OF layer, we should - * kill filling any resources from hwmod. - */ - if (res_count > pdev->num_resources) { - /* Allocate resources memory to account for new resources */ - res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL); - if (!res) - goto oda_exit3; - - /* - * If pdev->num_resources > 0, then assume that, - * MEM and IRQ resources will only come from DT and only - * fill DMA resource from hwmod layer. - */ - if (pdev->num_resources && pdev->resource) { - dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n", - __func__, res_count); - memcpy(res, pdev->resource, - sizeof(struct resource) * pdev->num_resources); - _od_fill_dma_resources(od, &res[pdev->num_resources]); - } else { - dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n", - __func__, res_count); - omap_device_fill_resources(od, res); - } - - ret = platform_device_add_resources(pdev, res, res_count); - kfree(res); - - if (ret) - goto oda_exit3; - } - - if (!pm_lats) { - pm_lats = omap_default_latency; - pm_lats_cnt = ARRAY_SIZE(omap_default_latency); - } - - od->pm_lats_cnt = pm_lats_cnt; - od->pm_lats = kmemdup(pm_lats, - sizeof(struct omap_device_pm_latency) * pm_lats_cnt, - GFP_KERNEL); - if (!od->pm_lats) - goto oda_exit3; - - pdev->archdata.od = od; - - for (i = 0; i < oh_cnt; i++) { - hwmods[i]->od = od; - _add_hwmod_clocks_clkdev(od, hwmods[i]); - } - - return od; - -oda_exit3: - kfree(hwmods); -oda_exit2: - kfree(od); -oda_exit1: - dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret); - - return ERR_PTR(ret); -} - -void omap_device_delete(struct omap_device *od) -{ - if (!od) - return; - - od->pdev->archdata.od = NULL; - kfree(od->pm_lats); - kfree(od->hwmods); - kfree(od); -} - -/** - * omap_device_build - build and register an omap_device with one omap_hwmod - * @pdev_name: name of the platform_device driver to use - * @pdev_id: this platform_device's connection ID - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata - * @pm_lats: pointer to a omap_device_pm_latency array for this device - * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats - * @is_early_device: should the device be registered as an early device or not - * - * Convenience function for building and registering a single - * omap_device record, which in turn builds and registers a - * platform_device record. See omap_device_build_ss() for more - * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise, - * passes along the return value of omap_device_build_ss(). - */ -struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id, - struct omap_hwmod *oh, void *pdata, - int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt, int is_early_device) -{ - struct omap_hwmod *ohs[] = { oh }; - - if (!oh) - return ERR_PTR(-EINVAL); - - return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata, - pdata_len, pm_lats, pm_lats_cnt, - is_early_device); -} - -/** - * omap_device_build_ss - build and register an omap_device with multiple hwmods - * @pdev_name: name of the platform_device driver to use - * @pdev_id: this platform_device's connection ID - * @oh: ptr to the single omap_hwmod that backs this omap_device - * @pdata: platform_data ptr to associate with the platform_device - * @pdata_len: amount of memory pointed to by @pdata - * @pm_lats: pointer to a omap_device_pm_latency array for this device - * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats - * @is_early_device: should the device be registered as an early device or not - * - * Convenience function for building and registering an omap_device - * subsystem record. Subsystem records consist of multiple - * omap_hwmods. This function in turn builds and registers a - * platform_device record. Returns an ERR_PTR() on error, or passes - * along the return value of omap_device_register(). - */ -struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id, - struct omap_hwmod **ohs, int oh_cnt, - void *pdata, int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt, int is_early_device) -{ - int ret = -ENOMEM; - struct platform_device *pdev; - struct omap_device *od; - - if (!ohs || oh_cnt == 0 || !pdev_name) - return ERR_PTR(-EINVAL); - - if (!pdata && pdata_len > 0) - return ERR_PTR(-EINVAL); - - pdev = platform_device_alloc(pdev_name, pdev_id); - if (!pdev) { - ret = -ENOMEM; - goto odbs_exit; - } - - /* Set the dev_name early to allow dev_xxx in omap_device_alloc */ - if (pdev->id != -1) - dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); - else - dev_set_name(&pdev->dev, "%s", pdev->name); - - od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt); - if (IS_ERR(od)) - goto odbs_exit1; - - ret = platform_device_add_data(pdev, pdata, pdata_len); - if (ret) - goto odbs_exit2; - - if (is_early_device) - ret = omap_early_device_register(pdev); - else - ret = omap_device_register(pdev); - if (ret) - goto odbs_exit2; - - return pdev; - -odbs_exit2: - omap_device_delete(od); -odbs_exit1: - platform_device_put(pdev); -odbs_exit: - - pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret); - - return ERR_PTR(ret); -} - -/** - * omap_early_device_register - register an omap_device as an early platform - * device. - * @od: struct omap_device * to register - * - * Register the omap_device structure. This currently just calls - * platform_early_add_device() on the underlying platform_device. - * Returns 0 by default. - */ -static int __init omap_early_device_register(struct platform_device *pdev) -{ - struct platform_device *devices[1]; - - devices[0] = pdev; - early_platform_add_devices(devices, 1); - return 0; -} - -#ifdef CONFIG_PM_RUNTIME -static int _od_runtime_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - int ret; - - ret = pm_generic_runtime_suspend(dev); - - if (!ret) - omap_device_idle(pdev); - - return ret; -} - -static int _od_runtime_idle(struct device *dev) -{ - return pm_generic_runtime_idle(dev); -} - -static int _od_runtime_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - - omap_device_enable(pdev); - - return pm_generic_runtime_resume(dev); -} -#endif - -#ifdef CONFIG_SUSPEND -static int _od_suspend_noirq(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - int ret; - - /* Don't attempt late suspend on a driver that is not bound */ - if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) - return 0; - - ret = pm_generic_suspend_noirq(dev); - - if (!ret && !pm_runtime_status_suspended(dev)) { - if (pm_generic_runtime_suspend(dev) == 0) { - if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)) - omap_device_idle(pdev); - od->flags |= OMAP_DEVICE_SUSPENDED; - } - } - - return ret; -} - -static int _od_resume_noirq(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - - if ((od->flags & OMAP_DEVICE_SUSPENDED) && - !pm_runtime_status_suspended(dev)) { - od->flags &= ~OMAP_DEVICE_SUSPENDED; - if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)) - omap_device_enable(pdev); - pm_generic_runtime_resume(dev); - } - - return pm_generic_resume_noirq(dev); -} -#else -#define _od_suspend_noirq NULL -#define _od_resume_noirq NULL -#endif - -struct dev_pm_domain omap_device_pm_domain = { - .ops = { - SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, - _od_runtime_idle) - USE_PLATFORM_PM_SLEEP_OPS - .suspend_noirq = _od_suspend_noirq, - .resume_noirq = _od_resume_noirq, - } -}; - -/** - * omap_device_register - register an omap_device with one omap_hwmod - * @od: struct omap_device * to register - * - * Register the omap_device structure. This currently just calls - * platform_device_register() on the underlying platform_device. - * Returns the return value of platform_device_register(). - */ -int omap_device_register(struct platform_device *pdev) -{ - pr_debug("omap_device: %s: registering\n", pdev->name); - - pdev->dev.pm_domain = &omap_device_pm_domain; - return platform_device_add(pdev); -} - - -/* Public functions for use by device drivers through struct platform_data */ - -/** - * omap_device_enable - fully activate an omap_device - * @od: struct omap_device * to activate - * - * Do whatever is necessary for the hwmods underlying omap_device @od - * to be accessible and ready to operate. This generally involves - * enabling clocks, setting SYSCONFIG registers; and in the future may - * involve remuxing pins. Device drivers should call this function - * (through platform_data function pointers) where they would normally - * enable clocks, etc. Returns -EINVAL if called when the omap_device - * is already enabled, or passes along the return value of - * _omap_device_activate(). - */ -int omap_device_enable(struct platform_device *pdev) -{ - int ret; - struct omap_device *od; - - od = to_omap_device(pdev); - - if (od->_state == OMAP_DEVICE_STATE_ENABLED) { - dev_warn(&pdev->dev, - "omap_device: %s() called from invalid state %d\n", - __func__, od->_state); - return -EINVAL; - } - - /* Enable everything if we're enabling this device from scratch */ - if (od->_state == OMAP_DEVICE_STATE_UNKNOWN) - od->pm_lat_level = od->pm_lats_cnt; - - ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT); - - od->dev_wakeup_lat = 0; - od->_dev_wakeup_lat_limit = UINT_MAX; - od->_state = OMAP_DEVICE_STATE_ENABLED; - - return ret; -} - -/** - * omap_device_idle - idle an omap_device - * @od: struct omap_device * to idle - * - * Idle omap_device @od by calling as many .deactivate_func() entries - * in the omap_device's pm_lats table as is possible without exceeding - * the device's maximum wakeup latency limit, pm_lat_limit. Device - * drivers should call this function (through platform_data function - * pointers) where they would normally disable clocks after operations - * complete, etc.. Returns -EINVAL if the omap_device is not - * currently enabled, or passes along the return value of - * _omap_device_deactivate(). - */ -int omap_device_idle(struct platform_device *pdev) -{ - int ret; - struct omap_device *od; - - od = to_omap_device(pdev); - - if (od->_state != OMAP_DEVICE_STATE_ENABLED) { - dev_warn(&pdev->dev, - "omap_device: %s() called from invalid state %d\n", - __func__, od->_state); - return -EINVAL; - } - - ret = _omap_device_deactivate(od, USE_WAKEUP_LAT); - - od->_state = OMAP_DEVICE_STATE_IDLE; - - return ret; -} - -/** - * omap_device_shutdown - shut down an omap_device - * @od: struct omap_device * to shut down - * - * Shut down omap_device @od by calling all .deactivate_func() entries - * in the omap_device's pm_lats table and then shutting down all of - * the underlying omap_hwmods. Used when a device is being "removed" - * or a device driver is being unloaded. Returns -EINVAL if the - * omap_device is not currently enabled or idle, or passes along the - * return value of _omap_device_deactivate(). - */ -int omap_device_shutdown(struct platform_device *pdev) -{ - int ret, i; - struct omap_device *od; - - od = to_omap_device(pdev); - - if (od->_state != OMAP_DEVICE_STATE_ENABLED && - od->_state != OMAP_DEVICE_STATE_IDLE) { - dev_warn(&pdev->dev, - "omap_device: %s() called from invalid state %d\n", - __func__, od->_state); - return -EINVAL; - } - - ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT); - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_shutdown(od->hwmods[i]); - - od->_state = OMAP_DEVICE_STATE_SHUTDOWN; - - return ret; -} - -/** - * omap_device_assert_hardreset - set a device's hardreset line - * @pdev: struct platform_device * to reset - * @name: const char * name of the reset line - * - * Set the hardreset line identified by @name on the IP blocks - * associated with the hwmods backing the platform_device @pdev. All - * of the hwmods associated with @pdev must have the same hardreset - * line linked to them for this to work. Passes along the return value - * of omap_hwmod_assert_hardreset() in the event of any failure, or - * returns 0 upon success. - */ -int omap_device_assert_hardreset(struct platform_device *pdev, const char *name) -{ - struct omap_device *od = to_omap_device(pdev); - int ret = 0; - int i; - - for (i = 0; i < od->hwmods_cnt; i++) { - ret = omap_hwmod_assert_hardreset(od->hwmods[i], name); - if (ret) - break; - } - - return ret; -} - -/** - * omap_device_deassert_hardreset - release a device's hardreset line - * @pdev: struct platform_device * to reset - * @name: const char * name of the reset line - * - * Release the hardreset line identified by @name on the IP blocks - * associated with the hwmods backing the platform_device @pdev. All - * of the hwmods associated with @pdev must have the same hardreset - * line linked to them for this to work. Passes along the return - * value of omap_hwmod_deassert_hardreset() in the event of any - * failure, or returns 0 upon success. - */ -int omap_device_deassert_hardreset(struct platform_device *pdev, - const char *name) -{ - struct omap_device *od = to_omap_device(pdev); - int ret = 0; - int i; - - for (i = 0; i < od->hwmods_cnt; i++) { - ret = omap_hwmod_deassert_hardreset(od->hwmods[i], name); - if (ret) - break; - } - - return ret; -} - -/** - * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim - * @od: struct omap_device * - * - * When a device's maximum wakeup latency limit changes, call some of - * the .activate_func or .deactivate_func function pointers in the - * omap_device's pm_lats array to ensure that the device's maximum - * wakeup latency is less than or equal to the new latency limit. - * Intended to be called by OMAP PM code whenever a device's maximum - * wakeup latency limit changes (e.g., via - * omap_pm_set_dev_wakeup_lat()). Returns 0 if nothing needs to be - * done (e.g., if the omap_device is not currently idle, or if the - * wakeup latency is already current with the new limit) or passes - * along the return value of _omap_device_deactivate() or - * _omap_device_activate(). - */ -int omap_device_align_pm_lat(struct platform_device *pdev, - u32 new_wakeup_lat_limit) -{ - int ret = -EINVAL; - struct omap_device *od; - - od = to_omap_device(pdev); - - if (new_wakeup_lat_limit == od->dev_wakeup_lat) - return 0; - - od->_dev_wakeup_lat_limit = new_wakeup_lat_limit; - - if (od->_state != OMAP_DEVICE_STATE_IDLE) - return 0; - else if (new_wakeup_lat_limit > od->dev_wakeup_lat) - ret = _omap_device_deactivate(od, USE_WAKEUP_LAT); - else if (new_wakeup_lat_limit < od->dev_wakeup_lat) - ret = _omap_device_activate(od, USE_WAKEUP_LAT); - - return ret; -} - -/** - * omap_device_get_pwrdm - return the powerdomain * associated with @od - * @od: struct omap_device * - * - * Return the powerdomain associated with the first underlying - * omap_hwmod for this omap_device. Intended for use by core OMAP PM - * code. Returns NULL on error or a struct powerdomain * upon - * success. - */ -struct powerdomain *omap_device_get_pwrdm(struct omap_device *od) -{ - /* - * XXX Assumes that all omap_hwmod powerdomains are identical. - * This may not necessarily be true. There should be a sanity - * check in here to WARN() if any difference appears. - */ - if (!od->hwmods_cnt) - return NULL; - - return omap_hwmod_get_pwrdm(od->hwmods[0]); -} - -/** - * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base - * @od: struct omap_device * - * - * Return the MPU's virtual address for the base of the hwmod, from - * the ioremap() that the hwmod code does. Only valid if there is one - * hwmod associated with this device. Returns NULL if there are zero - * or more than one hwmods associated with this omap_device; - * otherwise, passes along the return value from - * omap_hwmod_get_mpu_rt_va(). - */ -void __iomem *omap_device_get_rt_va(struct omap_device *od) -{ - if (od->hwmods_cnt != 1) - return NULL; - - return omap_hwmod_get_mpu_rt_va(od->hwmods[0]); -} - -/** - * omap_device_get_by_hwmod_name() - convert a hwmod name to - * device pointer. - * @oh_name: name of the hwmod device - * - * Returns back a struct device * pointer associated with a hwmod - * device represented by a hwmod_name - */ -struct device *omap_device_get_by_hwmod_name(const char *oh_name) -{ - struct omap_hwmod *oh; - - if (!oh_name) { - WARN(1, "%s: no hwmod name!\n", __func__); - return ERR_PTR(-EINVAL); - } - - oh = omap_hwmod_lookup(oh_name); - if (IS_ERR_OR_NULL(oh)) { - WARN(1, "%s: no hwmod for %s\n", __func__, - oh_name); - return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV); - } - if (IS_ERR_OR_NULL(oh->od)) { - WARN(1, "%s: no omap_device for %s\n", __func__, - oh_name); - return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV); - } - - if (IS_ERR_OR_NULL(oh->od->pdev)) - return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV); - - return &oh->od->pdev->dev; -} -EXPORT_SYMBOL(omap_device_get_by_hwmod_name); - -/* - * Public functions intended for use in omap_device_pm_latency - * .activate_func and .deactivate_func function pointers - */ - -/** - * omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods - * @od: struct omap_device *od - * - * Enable all underlying hwmods. Returns 0. - */ -int omap_device_enable_hwmods(struct omap_device *od) -{ - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_enable(od->hwmods[i]); - - /* XXX pass along return value here? */ - return 0; -} - -/** - * omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods - * @od: struct omap_device *od - * - * Idle all underlying hwmods. Returns 0. - */ -int omap_device_idle_hwmods(struct omap_device *od) -{ - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_idle(od->hwmods[i]); - - /* XXX pass along return value here? */ - return 0; -} - -/** - * omap_device_disable_clocks - disable all main and interface clocks - * @od: struct omap_device *od - * - * Disable the main functional clock and interface clock for all of the - * omap_hwmods associated with the omap_device. Returns 0. - */ -int omap_device_disable_clocks(struct omap_device *od) -{ - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_disable_clocks(od->hwmods[i]); - - /* XXX pass along return value here? */ - return 0; -} - -/** - * omap_device_enable_clocks - enable all main and interface clocks - * @od: struct omap_device *od - * - * Enable the main functional clock and interface clock for all of the - * omap_hwmods associated with the omap_device. Returns 0. - */ -int omap_device_enable_clocks(struct omap_device *od) -{ - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_enable_clocks(od->hwmods[i]); - - /* XXX pass along return value here? */ - return 0; -} - -static struct notifier_block platform_nb = { - .notifier_call = _omap_device_notifier_call, -}; - -static int __init omap_device_init(void) -{ - bus_register_notifier(&platform_bus_type, &platform_nb); - return 0; -} -core_initcall(omap_device_init); - -/** - * omap_device_late_idle - idle devices without drivers - * @dev: struct device * associated with omap_device - * @data: unused - * - * Check the driver bound status of this device, and idle it - * if there is no driver attached. - */ -static int __init omap_device_late_idle(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - - if (!od) - return 0; - - /* - * If omap_device state is enabled, but has no driver bound, - * idle it. - */ - if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) { - if (od->_state == OMAP_DEVICE_STATE_ENABLED) { - dev_warn(dev, "%s: enabled but no driver. Idling\n", - __func__); - omap_device_idle(pdev); - } - } - - return 0; -} - -static int __init omap_device_late_init(void) -{ - bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle); - return 0; -} -late_initcall(omap_device_late_init); -- cgit v1.2.3 From 2a296c8f89bc6aaf91b255c7d631fcbbfaf840ec Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 2 Oct 2012 17:41:35 -0700 Subject: ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2 Let's make omap_hwmod local to mach-omap2 for ARM common zImage support. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/omap_hwmod.h | 676 --------------------------- 1 file changed, 676 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/omap_hwmod.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h deleted file mode 100644 index b3349f7b1a2c..000000000000 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ /dev/null @@ -1,676 +0,0 @@ -/* - * omap_hwmod macros, structures - * - * Copyright (C) 2009-2011 Nokia Corporation - * Copyright (C) 2012 Texas Instruments, Inc. - * Paul Walmsley - * - * Created in collaboration with (alphabetical order): Benoît Cousson, - * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari - * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * These headers and macros are used to define OMAP on-chip module - * data and their integration with other OMAP modules and Linux. - * Copious documentation and references can also be found in the - * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this - * writing). - * - * To do: - * - add interconnect error log structures - * - add pinmuxing - * - init_conn_id_bit (CONNID_BIT_VECTOR) - * - implement default hwmod SMS/SDRC flags? - * - move Linux-specific data ("non-ROM data") out - * - */ -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H - -#include -#include -#include -#include -#include -#include - -struct omap_device; - -extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1; -extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; -extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; - -/* - * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant - * with the original PRCM protocol defined for OMAP2420 - */ -#define SYSC_TYPE1_MIDLEMODE_SHIFT 12 -#define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT) -#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT 8 -#define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT) -#define SYSC_TYPE1_SIDLEMODE_SHIFT 3 -#define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT) -#define SYSC_TYPE1_ENAWAKEUP_SHIFT 2 -#define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_TYPE1_ENAWAKEUP_SHIFT) -#define SYSC_TYPE1_SOFTRESET_SHIFT 1 -#define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_TYPE1_SOFTRESET_SHIFT) -#define SYSC_TYPE1_AUTOIDLE_SHIFT 0 -#define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_TYPE1_AUTOIDLE_SHIFT) - -/* - * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant - * with the new PRCM protocol defined for new OMAP4 IPs. - */ -#define SYSC_TYPE2_SOFTRESET_SHIFT 0 -#define SYSC_TYPE2_SOFTRESET_MASK (1 << SYSC_TYPE2_SOFTRESET_SHIFT) -#define SYSC_TYPE2_SIDLEMODE_SHIFT 2 -#define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT) -#define SYSC_TYPE2_MIDLEMODE_SHIFT 4 -#define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT) -#define SYSC_TYPE2_DMADISABLE_SHIFT 16 -#define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT) - -/* - * OCP SYSCONFIG bit shifts/masks TYPE3. - * This is applicable for some IPs present in AM33XX - */ -#define SYSC_TYPE3_SIDLEMODE_SHIFT 0 -#define SYSC_TYPE3_SIDLEMODE_MASK (0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT) -#define SYSC_TYPE3_MIDLEMODE_SHIFT 2 -#define SYSC_TYPE3_MIDLEMODE_MASK (0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT) - -/* OCP SYSSTATUS bit shifts/masks */ -#define SYSS_RESETDONE_SHIFT 0 -#define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT) - -/* Master standby/slave idle mode flags */ -#define HWMOD_IDLEMODE_FORCE (1 << 0) -#define HWMOD_IDLEMODE_NO (1 << 1) -#define HWMOD_IDLEMODE_SMART (1 << 2) -#define HWMOD_IDLEMODE_SMART_WKUP (1 << 3) - -/* modulemode control type (SW or HW) */ -#define MODULEMODE_HWCTRL 1 -#define MODULEMODE_SWCTRL 2 - - -/** - * struct omap_hwmod_mux_info - hwmod specific mux configuration - * @pads: array of omap_device_pad entries - * @nr_pads: number of omap_device_pad entries - * - * Note that this is currently built during init as needed. - */ -struct omap_hwmod_mux_info { - int nr_pads; - struct omap_device_pad *pads; - int nr_pads_dynamic; - struct omap_device_pad **pads_dynamic; - int *irqs; - bool enabled; -}; - -/** - * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod - * @name: name of the IRQ channel (module local name) - * @irq: IRQ channel ID (should be non-negative except -1 = terminator) - * - * @name should be something short, e.g., "tx" or "rx". It is for use - * by platform_get_resource_byname(). It is defined locally to the - * hwmod. - */ -struct omap_hwmod_irq_info { - const char *name; - s16 irq; -}; - -/** - * struct omap_hwmod_dma_info - DMA channels used by the hwmod - * @name: name of the DMA channel (module local name) - * @dma_req: DMA request ID (should be non-negative except -1 = terminator) - * - * @name should be something short, e.g., "tx" or "rx". It is for use - * by platform_get_resource_byname(). It is defined locally to the - * hwmod. - */ -struct omap_hwmod_dma_info { - const char *name; - s16 dma_req; -}; - -/** - * struct omap_hwmod_rst_info - IPs reset lines use by hwmod - * @name: name of the reset line (module local name) - * @rst_shift: Offset of the reset bit - * @st_shift: Offset of the reset status bit (OMAP2/3 only) - * - * @name should be something short, e.g., "cpu0" or "rst". It is defined - * locally to the hwmod. - */ -struct omap_hwmod_rst_info { - const char *name; - u8 rst_shift; - u8 st_shift; -}; - -/** - * struct omap_hwmod_opt_clk - optional clocks used by this hwmod - * @role: "sys", "32k", "tv", etc -- for use in clk_get() - * @clk: opt clock: OMAP clock name - * @_clk: pointer to the struct clk (filled in at runtime) - * - * The module's interface clock and main functional clock should not - * be added as optional clocks. - */ -struct omap_hwmod_opt_clk { - const char *role; - const char *clk; - struct clk *_clk; -}; - - -/* omap_hwmod_omap2_firewall.flags bits */ -#define OMAP_FIREWALL_L3 (1 << 0) -#define OMAP_FIREWALL_L4 (1 << 1) - -/** - * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data - * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_* - * @l4_fw_region: L4 firewall region ID - * @l4_prot_group: L4 protection group ID - * @flags: (see omap_hwmod_omap2_firewall.flags macros above) - */ -struct omap_hwmod_omap2_firewall { - u8 l3_perm_bit; - u8 l4_fw_region; - u8 l4_prot_group; - u8 flags; -}; - - -/* - * omap_hwmod_addr_space.flags bits - * - * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init. - * ADDR_TYPE_RT: Address space contains module register target data. - */ -#define ADDR_MAP_ON_INIT (1 << 0) /* XXX does not belong */ -#define ADDR_TYPE_RT (1 << 1) - -/** - * struct omap_hwmod_addr_space - address space handled by the hwmod - * @name: name of the address space - * @pa_start: starting physical address - * @pa_end: ending physical address - * @flags: (see omap_hwmod_addr_space.flags macros above) - * - * Address space doesn't necessarily follow physical interconnect - * structure. GPMC is one example. - */ -struct omap_hwmod_addr_space { - const char *name; - u32 pa_start; - u32 pa_end; - u8 flags; -}; - - -/* - * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this - * interface to interact with the hwmod. Used to add sleep dependencies - * when the module is enabled or disabled. - */ -#define OCP_USER_MPU (1 << 0) -#define OCP_USER_SDMA (1 << 1) -#define OCP_USER_DSP (1 << 2) -#define OCP_USER_IVA (1 << 3) - -/* omap_hwmod_ocp_if.flags bits */ -#define OCPIF_SWSUP_IDLE (1 << 0) -#define OCPIF_CAN_BURST (1 << 1) - -/* omap_hwmod_ocp_if._int_flags possibilities */ -#define _OCPIF_INT_FLAGS_REGISTERED (1 << 0) - - -/** - * struct omap_hwmod_ocp_if - OCP interface data - * @master: struct omap_hwmod that initiates OCP transactions on this link - * @slave: struct omap_hwmod that responds to OCP transactions on this link - * @addr: address space associated with this link - * @clk: interface clock: OMAP clock name - * @_clk: pointer to the interface struct clk (filled in at runtime) - * @fw: interface firewall data - * @width: OCP data width - * @user: initiators using this interface (see OCP_USER_* macros above) - * @flags: OCP interface flags (see OCPIF_* macros above) - * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above) - * - * It may also be useful to add a tag_cnt field for OCP2.x devices. - * - * Parameter names beginning with an underscore are managed internally by - * the omap_hwmod code and should not be set during initialization. - */ -struct omap_hwmod_ocp_if { - struct omap_hwmod *master; - struct omap_hwmod *slave; - struct omap_hwmod_addr_space *addr; - const char *clk; - struct clk *_clk; - union { - struct omap_hwmod_omap2_firewall omap2; - } fw; - u8 width; - u8 user; - u8 flags; - u8 _int_flags; -}; - - -/* Macros for use in struct omap_hwmod_sysconfig */ - -/* Flags for use in omap_hwmod_sysconfig.idlemodes */ -#define MASTER_STANDBY_SHIFT 4 -#define SLAVE_IDLE_SHIFT 0 -#define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT) -#define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT) -#define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT) -#define SIDLE_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT) -#define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT) -#define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT) -#define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT) -#define MSTANDBY_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT) - -/* omap_hwmod_sysconfig.sysc_flags capability flags */ -#define SYSC_HAS_AUTOIDLE (1 << 0) -#define SYSC_HAS_SOFTRESET (1 << 1) -#define SYSC_HAS_ENAWAKEUP (1 << 2) -#define SYSC_HAS_EMUFREE (1 << 3) -#define SYSC_HAS_CLOCKACTIVITY (1 << 4) -#define SYSC_HAS_SIDLEMODE (1 << 5) -#define SYSC_HAS_MIDLEMODE (1 << 6) -#define SYSS_HAS_RESET_STATUS (1 << 7) -#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */ -#define SYSC_HAS_RESET_STATUS (1 << 9) -#define SYSC_HAS_DMADISABLE (1 << 10) - -/* omap_hwmod_sysconfig.clockact flags */ -#define CLOCKACT_TEST_BOTH 0x0 -#define CLOCKACT_TEST_MAIN 0x1 -#define CLOCKACT_TEST_ICLK 0x2 -#define CLOCKACT_TEST_NONE 0x3 - -/** - * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets. - * @midle_shift: Offset of the midle bit - * @clkact_shift: Offset of the clockactivity bit - * @sidle_shift: Offset of the sidle bit - * @enwkup_shift: Offset of the enawakeup bit - * @srst_shift: Offset of the softreset bit - * @autoidle_shift: Offset of the autoidle bit - * @dmadisable_shift: Offset of the dmadisable bit - */ -struct omap_hwmod_sysc_fields { - u8 midle_shift; - u8 clkact_shift; - u8 sidle_shift; - u8 enwkup_shift; - u8 srst_shift; - u8 autoidle_shift; - u8 dmadisable_shift; -}; - -/** - * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data - * @rev_offs: IP block revision register offset (from module base addr) - * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) - * @syss_offs: OCP_SYSSTATUS register offset (from module base addr) - * @srst_udelay: Delay needed after doing a softreset in usecs - * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART} - * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported - * @clockact: the default value of the module CLOCKACTIVITY bits - * - * @clockact describes to the module which clocks are likely to be - * disabled when the PRCM issues its idle request to the module. Some - * modules have separate clockdomains for the interface clock and main - * functional clock, and can check whether they should acknowledge the - * idle request based on the internal module functionality that has - * been associated with the clocks marked in @clockact. This field is - * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below) - * - * @sysc_fields: structure containing the offset positions of various bits in - * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or - * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on - * whether the device ip is compliant with the original PRCM protocol - * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs. - * If the device follows a different scheme for the sysconfig register , - * then this field has to be populated with the correct offset structure. - */ -struct omap_hwmod_class_sysconfig { - u32 rev_offs; - u32 sysc_offs; - u32 syss_offs; - u16 sysc_flags; - struct omap_hwmod_sysc_fields *sysc_fields; - u8 srst_udelay; - u8 idlemodes; - u8 clockact; -}; - -/** - * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data - * @module_offs: PRCM submodule offset from the start of the PRM/CM - * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3) - * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs - * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3) - * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit - * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit - * - * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST, - * WKEN, GRPSEL registers. In an ideal world, no extra information - * would be needed for IDLEST information, but alas, there are some - * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit - * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST) - */ -struct omap_hwmod_omap2_prcm { - s16 module_offs; - u8 prcm_reg_id; - u8 module_bit; - u8 idlest_reg_id; - u8 idlest_idle_bit; - u8 idlest_stdby_bit; -}; - -/* - * Possible values for struct omap_hwmod_omap4_prcm.flags - * - * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM - * module-level context loss register associated with them; this - * flag bit should be set in those cases - */ -#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0) - -/** - * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data - * @clkctrl_reg: PRCM address of the clock control register - * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM - * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register - * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM - * @submodule_wkdep_bit: bit shift of the WKDEP range - * @flags: PRCM register capabilities for this IP block - * - * If @lostcontext_mask is not defined, context loss check code uses - * whole register without masking. @lostcontext_mask should only be - * defined in cases where @context_offs register is shared by two or - * more hwmods. - */ -struct omap_hwmod_omap4_prcm { - u16 clkctrl_offs; - u16 rstctrl_offs; - u16 rstst_offs; - u16 context_offs; - u32 lostcontext_mask; - u8 submodule_wkdep_bit; - u8 modulemode; - u8 flags; -}; - - -/* - * omap_hwmod.flags definitions - * - * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out - * of idle, rather than relying on module smart-idle - * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out - * of standby, rather than relying on module smart-standby - * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for - * SDRAM controller, etc. XXX probably belongs outside the main hwmod file - * XXX Should be HWMOD_SETUP_NO_RESET - * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM - * controller, etc. XXX probably belongs outside the main hwmod file - * XXX Should be HWMOD_SETUP_NO_IDLE - * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE) - * when module is enabled, rather than the default, which is to - * enable autoidle - * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup - * HWMOD_NO_IDLEST: this module does not have idle status - this is the case - * only for few initiator modules on OMAP2 & 3. - * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset. - * This is needed for devices like DSS that require optional clocks enabled - * in order to complete the reset. Optional clocks will be disabled - * again after the reset. - * HWMOD_16BIT_REG: Module has 16bit registers - */ -#define HWMOD_SWSUP_SIDLE (1 << 0) -#define HWMOD_SWSUP_MSTANDBY (1 << 1) -#define HWMOD_INIT_NO_RESET (1 << 2) -#define HWMOD_INIT_NO_IDLE (1 << 3) -#define HWMOD_NO_OCP_AUTOIDLE (1 << 4) -#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5) -#define HWMOD_NO_IDLEST (1 << 6) -#define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) -#define HWMOD_16BIT_REG (1 << 8) - -/* - * omap_hwmod._int_flags definitions - * These are for internal use only and are managed by the omap_hwmod code. - * - * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module - * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP - * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached - * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) - - * causes the first call to _enable() to only update the pinmux - */ -#define _HWMOD_NO_MPU_PORT (1 << 0) -#define _HWMOD_WAKEUP_ENABLED (1 << 1) -#define _HWMOD_SYSCONFIG_LOADED (1 << 2) -#define _HWMOD_SKIP_ENABLE (1 << 3) - -/* - * omap_hwmod._state definitions - * - * INITIALIZED: reset (optionally), initialized, enabled, disabled - * (optionally) - * - * - */ -#define _HWMOD_STATE_UNKNOWN 0 -#define _HWMOD_STATE_REGISTERED 1 -#define _HWMOD_STATE_CLKS_INITED 2 -#define _HWMOD_STATE_INITIALIZED 3 -#define _HWMOD_STATE_ENABLED 4 -#define _HWMOD_STATE_IDLE 5 -#define _HWMOD_STATE_DISABLED 6 - -/** - * struct omap_hwmod_class - the type of an IP block - * @name: name of the hwmod_class - * @sysc: device SYSCONFIG/SYSSTATUS register data - * @rev: revision of the IP class - * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown - * @reset: ptr to fn to be executed in place of the standard hwmod reset fn - * - * Represent the class of a OMAP hardware "modules" (e.g. timer, - * smartreflex, gpio, uart...) - * - * @pre_shutdown is a function that will be run immediately before - * hwmod clocks are disabled, etc. It is intended for use for hwmods - * like the MPU watchdog, which cannot be disabled with the standard - * omap_hwmod_shutdown(). The function should return 0 upon success, - * or some negative error upon failure. Returning an error will cause - * omap_hwmod_shutdown() to abort the device shutdown and return an - * error. - * - * If @reset is defined, then the function it points to will be - * executed in place of the standard hwmod _reset() code in - * mach-omap2/omap_hwmod.c. This is needed for IP blocks which have - * unusual reset sequences - usually processor IP blocks like the IVA. - */ -struct omap_hwmod_class { - const char *name; - struct omap_hwmod_class_sysconfig *sysc; - u32 rev; - int (*pre_shutdown)(struct omap_hwmod *oh); - int (*reset)(struct omap_hwmod *oh); -}; - -/** - * struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs - * @ocp_if: OCP interface structure record pointer - * @node: list_head pointing to next struct omap_hwmod_link in a list - */ -struct omap_hwmod_link { - struct omap_hwmod_ocp_if *ocp_if; - struct list_head node; -}; - -/** - * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks) - * @name: name of the hwmod - * @class: struct omap_hwmod_class * to the class of this hwmod - * @od: struct omap_device currently associated with this hwmod (internal use) - * @mpu_irqs: ptr to an array of MPU IRQs - * @sdma_reqs: ptr to an array of System DMA request IDs - * @prcm: PRCM data pertaining to this hwmod - * @main_clk: main clock: OMAP clock name - * @_clk: pointer to the main struct clk (filled in at runtime) - * @opt_clks: other device clocks that drivers can request (0..*) - * @voltdm: pointer to voltage domain (filled in at runtime) - * @dev_attr: arbitrary device attributes that can be passed to the driver - * @_sysc_cache: internal-use hwmod flags - * @_mpu_rt_va: cached register target start address (internal use) - * @_mpu_port: cached MPU register target slave (internal use) - * @opt_clks_cnt: number of @opt_clks - * @master_cnt: number of @master entries - * @slaves_cnt: number of @slave entries - * @response_lat: device OCP response latency (in interface clock cycles) - * @_int_flags: internal-use hwmod flags - * @_state: internal-use hwmod state - * @_postsetup_state: internal-use state to leave the hwmod in after _setup() - * @flags: hwmod flags (documented below) - * @_lock: spinlock serializing operations on this hwmod - * @node: list node for hwmod list (internal use) - * - * @main_clk refers to this module's "main clock," which for our - * purposes is defined as "the functional clock needed for register - * accesses to complete." Modules may not have a main clock if the - * interface clock also serves as a main clock. - * - * Parameter names beginning with an underscore are managed internally by - * the omap_hwmod code and should not be set during initialization. - * - * @masters and @slaves are now deprecated. - */ -struct omap_hwmod { - const char *name; - struct omap_hwmod_class *class; - struct omap_device *od; - struct omap_hwmod_mux_info *mux; - struct omap_hwmod_irq_info *mpu_irqs; - struct omap_hwmod_dma_info *sdma_reqs; - struct omap_hwmod_rst_info *rst_lines; - union { - struct omap_hwmod_omap2_prcm omap2; - struct omap_hwmod_omap4_prcm omap4; - } prcm; - const char *main_clk; - struct clk *_clk; - struct omap_hwmod_opt_clk *opt_clks; - char *clkdm_name; - struct clockdomain *clkdm; - struct list_head master_ports; /* connect to *_IA */ - struct list_head slave_ports; /* connect to *_TA */ - void *dev_attr; - u32 _sysc_cache; - void __iomem *_mpu_rt_va; - spinlock_t _lock; - struct list_head node; - struct omap_hwmod_ocp_if *_mpu_port; - u16 flags; - u8 response_lat; - u8 rst_lines_cnt; - u8 opt_clks_cnt; - u8 masters_cnt; - u8 slaves_cnt; - u8 hwmods_cnt; - u8 _int_flags; - u8 _state; - u8 _postsetup_state; -}; - -struct omap_hwmod *omap_hwmod_lookup(const char *name); -int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), - void *data); - -int __init omap_hwmod_setup_one(const char *name); - -int omap_hwmod_enable(struct omap_hwmod *oh); -int omap_hwmod_idle(struct omap_hwmod *oh); -int omap_hwmod_shutdown(struct omap_hwmod *oh); - -int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name); -int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name); -int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); - -int omap_hwmod_enable_clocks(struct omap_hwmod *oh); -int omap_hwmod_disable_clocks(struct omap_hwmod *oh); - -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle); - -int omap_hwmod_reset(struct omap_hwmod *oh); -void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); - -void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); -u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); -int omap_hwmod_softreset(struct omap_hwmod *oh); - -int omap_hwmod_count_resources(struct omap_hwmod *oh); -int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); -int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res); -int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, - const char *name, struct resource *res); - -struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); -void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); - -int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh); -int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh); - -int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); -int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); - -int omap_hwmod_for_each_by_class(const char *classname, - int (*fn)(struct omap_hwmod *oh, - void *user), - void *user); - -int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state); -int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh); - -int omap_hwmod_no_setup_reset(struct omap_hwmod *oh); - -int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx); - -extern void __init omap_hwmod_init(void); - -const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh); - -/* - * Chip variant-specific hwmod init routines - XXX should be converted - * to use initcalls once the initial boot ordering is straightened out - */ -extern int omap2420_hwmod_init(void); -extern int omap2430_hwmod_init(void); -extern int omap3xxx_hwmod_init(void); -extern int omap44xx_hwmod_init(void); -extern int am33xx_hwmod_init(void); - -extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois); - -#endif -- cgit v1.2.3 From dc843280c954877b8a196e59a9f92cd8b94c2d25 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 3 Oct 2012 11:23:43 -0700 Subject: ARM: OMAP: Merge plat/multi.h into plat/cpu.h This is private to cpu.h and no other places should need to include it and we can drop the include in mach-omap2/io.c. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/cpu.h | 96 ++++++++++++++++++++++++- arch/arm/plat-omap/include/plat/multi.h | 120 -------------------------------- 2 files changed, 95 insertions(+), 121 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/multi.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 67da857783ce..bfd9c5f5ee14 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -33,7 +33,101 @@ #ifndef __ASSEMBLY__ #include -#include + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP1 +#undef MULTI_OMAP2 +#undef OMAP_NAME + +#ifdef CONFIG_ARCH_OMAP730 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap730 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP850 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap850 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP15XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap1510 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap16xx +# endif +#endif +#ifdef CONFIG_ARCH_OMAP2PLUS +# if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) +# error "OMAP1 and OMAP2PLUS can't be selected at the same time" +# endif +#endif +#ifdef CONFIG_SOC_OMAP2420 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2420 +# endif +#endif +#ifdef CONFIG_SOC_OMAP2430 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2430 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP3 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap3 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP4 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap4 +# endif +#endif + +#ifdef CONFIG_SOC_OMAP5 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap5 +# endif +#endif + +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif /* * Omap device type i.e. EMU/HS/TST/GP/BAD diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h deleted file mode 100644 index 324d31b14852..000000000000 --- a/arch/arm/plat-omap/include/plat/multi.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Support for compiling in multiple OMAP processors - * - * Copyright (C) 2010 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __PLAT_OMAP_MULTI_H -#define __PLAT_OMAP_MULTI_H - -/* - * Test if multicore OMAP support is needed - */ -#undef MULTI_OMAP1 -#undef MULTI_OMAP2 -#undef OMAP_NAME - -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP850 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap850 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP15XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap1510 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap16xx -# endif -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS -# if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) -# error "OMAP1 and OMAP2PLUS can't be selected at the same time" -# endif -#endif -#ifdef CONFIG_SOC_OMAP2420 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2420 -# endif -#endif -#ifdef CONFIG_SOC_OMAP2430 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2430 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP3 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap3 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP4 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap4 -# endif -#endif - -#ifdef CONFIG_SOC_OMAP5 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap5 -# endif -#endif - -#ifdef CONFIG_SOC_AM33XX -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME am33xx -# endif -#endif - -#endif /* __PLAT_OMAP_MULTI_H */ -- cgit v1.2.3 From 1d5aef4950717526d4827e97a916d38d0d73657e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 3 Oct 2012 16:36:40 -0700 Subject: ARM: OMAP: Make plat/omap-pm.h local to mach-omap2 We must move this for ARM common zImage support. Note that neither drivers/media/rc/ir-rx51.c or drivers/media/platform/omap3isp/ispvideo.c need to include omap-pm.h, so this patch removes the include for those files. Acked-by: Laurent Pinchart Cc: Mauro Carvalho Chehab Cc: Timo Kokkonen Cc: linux-media@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 3 +- arch/arm/plat-omap/include/plat/omap-pm.h | 352 ------------------------------ arch/arm/plat-omap/omap-pm-noop.c | 4 +- 3 files changed, 3 insertions(+), 356 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/omap-pm.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 938b50a33439..4a0b30a4ebda 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -42,10 +42,11 @@ #include #include -#include #include +#include "../mach-omap2/omap-pm.h" + static u32 omap_reserved_systimers; static LIST_HEAD(omap_timer_list); static DEFINE_SPINLOCK(dm_timer_lock); diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h deleted file mode 100644 index 67faa7b8fe92..000000000000 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ /dev/null @@ -1,352 +0,0 @@ -/* - * omap-pm.h - OMAP power management interface - * - * Copyright (C) 2008-2010 Texas Instruments, Inc. - * Copyright (C) 2008-2010 Nokia Corporation - * Paul Walmsley - * - * Interface developed by (in alphabetical order): Karthik Dasu, Jouni - * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa, - * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, - * Richard Woodruff - */ - -#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H -#define ASM_ARM_ARCH_OMAP_OMAP_PM_H - -#include -#include -#include -#include - -/* - * agent_id values for use with omap_pm_set_min_bus_tput(): - * - * OCP_INITIATOR_AGENT is only valid for devices that can act as - * initiators -- it represents the device's L3 interconnect - * connection. OCP_TARGET_AGENT represents the device's L4 - * interconnect connection. - */ -#define OCP_TARGET_AGENT 1 -#define OCP_INITIATOR_AGENT 2 - -/** - * omap_pm_if_early_init - OMAP PM init code called before clock fw init - * @mpu_opp_table: array ptr to struct omap_opp for MPU - * @dsp_opp_table: array ptr to struct omap_opp for DSP - * @l3_opp_table : array ptr to struct omap_opp for CORE - * - * Initialize anything that must be configured before the clock - * framework starts. The "_if_" is to avoid name collisions with the - * PM idle-loop code. - */ -int __init omap_pm_if_early_init(void); - -/** - * omap_pm_if_init - OMAP PM init code called after clock fw init - * - * The main initialization code. OPP tables are passed in here. The - * "_if_" is to avoid name collisions with the PM idle-loop code. - */ -int __init omap_pm_if_init(void); - -/** - * omap_pm_if_exit - OMAP PM exit code - * - * Exit code; currently unused. The "_if_" is to avoid name - * collisions with the PM idle-loop code. - */ -void omap_pm_if_exit(void); - -/* - * Device-driver-originated constraints (via board-*.c files, platform_data) - */ - - -/** - * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency - * @dev: struct device * requesting the constraint - * @t: maximum MPU wakeup latency in microseconds - * - * Request that the maximum interrupt latency for the MPU to be no - * greater than @t microseconds. "Interrupt latency" in this case is - * defined as the elapsed time from the occurrence of a hardware or - * timer interrupt to the time when the device driver's interrupt - * service routine has been entered by the MPU. - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the MPU powerdomain into, and - * possibly the CORE powerdomain as well, since interrupt handling - * code currently runs from SDRAM. Advanced PM or board*.c code may - * also configure interrupt controller priorities, OCP bus priorities, - * CPU speed(s), etc. - * - * This function will not affect device wakeup latency, e.g., time - * elapsed from when a device driver enables a hardware device with - * clk_enable(), to when the device is ready for register access or - * other use. To control this device wakeup latency, use - * omap_pm_set_max_dev_wakeup_lat() - * - * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the - * previous t value. To remove the latency target for the MPU, call - * with t = -1. - * - * XXX This constraint will be deprecated soon in favor of the more - * general omap_pm_set_max_dev_wakeup_lat() - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); - - -/** - * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device - * @dev: struct device * requesting the constraint - * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT) - * @r: minimum throughput (in KiB/s) - * - * Request that the minimum data throughput on the OCP interconnect - * attached to device @dev interconnect agent @tbus_id be no less - * than @r KiB/s. - * - * It is expected that the OMAP PM or bus code will use this - * information to set the interconnect clock to run at the lowest - * possible speed that satisfies all current system users. The PM or - * bus code will adjust the estimate based on its model of the bus, so - * device driver authors should attempt to specify an accurate - * quantity for their device use case, and let the PM or bus code - * overestimate the numbers as necessary to handle request/response - * latency, other competing users on the system, etc. On OMAP2/3, if - * a driver requests a minimum L4 interconnect speed constraint, the - * code will also need to add an minimum L3 interconnect speed - * constraint, - * - * Multiple calls to omap_pm_set_min_bus_tput() will replace the - * previous rate value for this device. To remove the interconnect - * throughput restriction for this device, call with r = 0. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); - - -/** - * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency - * @req_dev: struct device * requesting the constraint, or NULL if none - * @dev: struct device * to set the constraint one - * @t: maximum device wakeup latency in microseconds - * - * Request that the maximum amount of time necessary for a device @dev - * to become accessible after its clocks are enabled should be no - * greater than @t microseconds. Specifically, this represents the - * time from when a device driver enables device clocks with - * clk_enable(), to when the register reads and writes on the device - * will succeed. This function should be called before clk_disable() - * is called, since the power state transition decision may be made - * during clk_disable(). - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the powerdomain enclosing this - * device into. - * - * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the - * previous wakeup latency values for this device. To remove the - * wakeup latency restriction for this device, call with t = -1. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, - long t); - - -/** - * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency - * @dev: struct device * - * @t: maximum DMA transfer start latency in microseconds - * - * Request that the maximum system DMA transfer start latency for this - * device 'dev' should be no greater than 't' microseconds. "DMA - * transfer start latency" here is defined as the elapsed time from - * when a device (e.g., McBSP) requests that a system DMA transfer - * start or continue, to the time at which data starts to flow into - * that device from the system DMA controller. - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the CORE powerdomain into. - * - * Since system DMA transfers may not involve the MPU, this function - * will not affect MPU wakeup latency. Use set_max_cpu_lat() to do - * so. Similarly, this function will not affect device wakeup latency - * -- use set_max_dev_wakeup_lat() to affect that. - * - * Multiple calls to set_max_sdma_lat() will replace the previous t - * value for this device. To remove the maximum DMA latency for this - * device, call with t = -1. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_max_sdma_lat(struct device *dev, long t); - - -/** - * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev - * @dev: struct device * requesting the constraint - * @clk: struct clk * to set the minimum rate constraint on - * @r: minimum rate in Hz - * - * Request that the minimum clock rate on the device @dev's clk @clk - * be no less than @r Hz. - * - * It is expected that the OMAP PM code will use this information to - * find an OPP or clock setting that will satisfy this clock rate - * constraint, along with any other applicable system constraints on - * the clock rate or corresponding voltage, etc. - * - * omap_pm_set_min_clk_rate() differs from the clock code's - * clk_set_rate() in that it considers other constraints before taking - * any hardware action, and may change a system OPP rather than just a - * clock rate. clk_set_rate() is intended to be a low-level - * interface. - * - * omap_pm_set_min_clk_rate() is easily open to abuse. A better API - * would be something like "omap_pm_set_min_dev_performance()"; - * however, there is no easily-generalizable concept of performance - * that applies to all devices. Only a device (and possibly the - * device subsystem) has both the subsystem-specific knowledge, and - * the hardware IP block-specific knowledge, to translate a constraint - * on "touchscreen sampling accuracy" or "number of pixels or polygons - * rendered per second" to a clock rate. This translation can be - * dependent on the hardware IP block's revision, or firmware version, - * and the driver is the only code on the system that has this - * information and can know how to translate that into a clock rate. - * - * The intended use-case for this function is for userspace or other - * kernel code to communicate a particular performance requirement to - * a subsystem; then for the subsystem to communicate that requirement - * to something that is meaningful to the device driver; then for the - * device driver to convert that requirement to a clock rate, and to - * then call omap_pm_set_min_clk_rate(). - * - * Users of this function (such as device drivers) should not simply - * call this function with some high clock rate to ensure "high - * performance." Rather, the device driver should take a performance - * constraint from its subsystem, such as "render at least X polygons - * per second," and use some formula or table to convert that into a - * clock rate constraint given the hardware type and hardware - * revision. Device drivers or subsystems should not assume that they - * know how to make a power/performance tradeoff - some device use - * cases may tolerate a lower-fidelity device function for lower power - * consumption; others may demand a higher-fidelity device function, - * no matter what the power consumption. - * - * Multiple calls to omap_pm_set_min_clk_rate() will replace the - * previous rate value for the device @dev. To remove the minimum clock - * rate constraint for the device, call with r = 0. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r); - -/* - * DSP Bridge-specific constraints - */ - -/** - * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table - * - * Intended for use by DSPBridge. Returns an array of OPP->DSP clock - * frequency entries. The final item in the array should have .rate = - * .opp_id = 0. - */ -const struct omap_opp *omap_pm_dsp_get_opp_table(void); - -/** - * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge - * @opp_id: target DSP OPP ID - * - * Set a minimum OPP ID for the DSP. This is intended to be called - * only from the DSP Bridge MPU-side driver. Unfortunately, the only - * information that code receives from the DSP/BIOS load estimator is the - * target OPP ID; hence, this interface. No return value. - */ -void omap_pm_dsp_set_min_opp(u8 opp_id); - -/** - * omap_pm_dsp_get_opp - report the current DSP OPP ID - * - * Report the current OPP for the DSP. Since on OMAP3, the DSP and - * MPU share a single voltage domain, the OPP ID returned back may - * represent a higher DSP speed than the OPP requested via - * omap_pm_dsp_set_min_opp(). - * - * Returns the current VDD1 OPP ID, or 0 upon error. - */ -u8 omap_pm_dsp_get_opp(void); - - -/* - * CPUFreq-originated constraint - * - * In the future, this should be handled by custom OPP clocktype - * functions. - */ - -/** - * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr - * - * Provide a frequency table usable by CPUFreq for the current chip/board. - * Returns a pointer to a struct cpufreq_frequency_table array or NULL - * upon error. - */ -struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void); - -/** - * omap_pm_cpu_set_freq - set the current minimum MPU frequency - * @f: MPU frequency in Hz - * - * Set the current minimum CPU frequency. The actual CPU frequency - * used could end up higher if the DSP requested a higher OPP. - * Intended to be called by plat-omap/cpu_omap.c:omap_target(). No - * return value. - */ -void omap_pm_cpu_set_freq(unsigned long f); - -/** - * omap_pm_cpu_get_freq - report the current CPU frequency - * - * Returns the current MPU frequency, or 0 upon error. - */ -unsigned long omap_pm_cpu_get_freq(void); - - -/* - * Device context loss tracking - */ - -/** - * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx - * @dev: struct device * - * - * This function returns the number of times that the device @dev has - * lost its internal context. This generally occurs on a powerdomain - * transition to OFF. Drivers use this as an optimization to avoid restoring - * context if the device hasn't lost it. To use, drivers should initially - * call this in their context save functions and store the result. Early in - * the driver's context restore function, the driver should call this function - * again, and compare the result to the stored counter. If they differ, the - * driver must restore device context. If the number of context losses - * exceeds the maximum positive integer, the function will wrap to 0 and - * continue counting. Returns the number of context losses for this device, - * or negative value upon error. - */ -int omap_pm_get_dev_context_loss_count(struct device *dev); - -void omap_pm_enable_off_mode(void); -void omap_pm_disable_off_mode(void); - -#endif diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index 3c96b567370e..198685b894b0 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -22,10 +22,8 @@ #include #include -/* Interface documentation is in mach/omap-pm.h */ -#include - #include "../mach-omap2/omap_device.h" +#include "../mach-omap2/omap-pm.h" static bool off_mode_enabled; static int dummy_context_loss_counter; -- cgit v1.2.3 From f583f0f2c720e4ac7d2ffd65996717bf0345a3e5 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Tue, 2 Oct 2012 00:17:05 +0530 Subject: ARM: OMAP2+: Move omap_reserve() locally to mach-omap2 omap_reserve() callback is defned only for mach-omap2. So, moving definition of omap_reserve() to mach-omap2. This helps is moving plat/omap_secure.h local to mach-omap2 Signed-off-by: Lokesh Vutla Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/common.c | 21 --------------------- 1 file changed, 21 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 2a9db0128a96..a1555e028123 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -17,32 +17,11 @@ #include #include "common.h" -#include -#include #include -#include - -void __init omap_reserve(void) -{ - omap_vram_reserve_sdram_memblock(); - omap_dsp_reserve_sdram_memblock(); - omap_secure_ram_reserve_memblock(); - omap_barrier_reserve_memblock(); -} - void __init omap_init_consistent_dma_size(void) { #ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); #endif } - -/* - * Stub function for OMAP2 so that common files - * continue to build when custom builds are used - */ -int __weak omap_secure_ram_reserve_memblock(void) -{ - return 0; -} -- cgit v1.2.3 From f7a9b8a147cc10c7181cf0ca7b2b06cebf950140 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Tue, 2 Oct 2012 00:17:06 +0530 Subject: ARM: OMAP: Move plat/omap-secure.h locally to mach-omap2 Moving plat/omap-secure.h locally to mach-omap2/ as part of single zImage work Signed-off-by: Lokesh Vutla Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/omap-secure.h | 14 -------------- 1 file changed, 14 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/omap-secure.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h deleted file mode 100644 index 0e4acd2d2deb..000000000000 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __OMAP_SECURE_H__ -#define __OMAP_SECURE_H__ - -#include - -extern int omap_secure_ram_reserve_memblock(void); - -#ifdef CONFIG_OMAP4_ERRATA_I688 -extern int omap_barrier_reserve_memblock(void); -#else -static inline void omap_barrier_reserve_memblock(void) -{ } -#endif -#endif /* __OMAP_SECURE_H__ */ -- cgit v1.2.3 From 1fe9be8248ae9a04a09fcec7fed486d31e7f0897 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 27 Sep 2012 10:33:33 -0600 Subject: ARM: OMAP: duplicate plat-omap/clock.c into mach-omap[12]/clock.c Duplicate arch/arm/plat-omap/clock.c into arch/arm/mach-omap1/clock.c and arch/arm/mach-omap2/clock.c. This is to support people who are working on the ARM single image kernel and the OMAP common clock framework conversion. Signed-off-by: Paul Walmsley Cc: Tony Lindgren Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/Makefile | 2 +- arch/arm/plat-omap/clock.c | 544 -------------------------------------------- 2 files changed, 1 insertion(+), 545 deletions(-) delete mode 100644 arch/arm/plat-omap/clock.c (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 9c81cf539218..4bd0ace20e98 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o +obj-y := common.o sram.o dma.o fb.o counter_32k.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c deleted file mode 100644 index 9d7ac20ef8f9..000000000000 --- a/arch/arm/plat-omap/clock.c +++ /dev/null @@ -1,544 +0,0 @@ -/* - * linux/arch/arm/plat-omap/clock.c - * - * Copyright (C) 2004 - 2008 Nokia corporation - * Written by Tuukka Tikkanen - * - * Modified for omap shared clock framework by Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); -static DEFINE_SPINLOCK(clockfw_lock); - -static struct clk_functions *arch_clock; - -/* - * Standard clock functions defined in include/linux/clk.h - */ - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - int ret; - - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - if (!arch_clock || !arch_clock->clk_enable) - return -EINVAL; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return; - - if (!arch_clock || !arch_clock->clk_disable) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->usecount == 0) { - pr_err("Trying disable clock %s with 0 usecount\n", - clk->name); - WARN_ON(1); - goto out; - } - - arch_clock->clk_disable(clk); - -out: - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long flags; - unsigned long ret; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = clk->rate; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_get_rate); - -/* - * Optional clock functions defined in include/linux/clk.h - */ - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - long ret; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - if (!arch_clock || !arch_clock->clk_round_rate) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_round_rate(clk, rate); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk)) - return ret; - - if (!arch_clock || !arch_clock->clk_set_rate) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_set_rate(clk, rate); - if (ret == 0) - propagate_rate(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent)) - return ret; - - if (!arch_clock || !arch_clock->clk_set_parent) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->usecount == 0) { - ret = arch_clock->clk_set_parent(clk, parent); - if (ret == 0) - propagate_rate(clk); - } else - ret = -EBUSY; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_parent); - -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -/* - * OMAP specific clock functions shared between omap1 and omap2 - */ - -int __initdata mpurate; - -/* - * By default we use the rate set by the bootloader. - * You can override this with mpurate= cmdline option. - */ -static int __init omap_clk_setup(char *str) -{ - get_option(&str, &mpurate); - - if (!mpurate) - return 1; - - if (mpurate < 1000) - mpurate *= 1000000; - - return 1; -} -__setup("mpurate=", omap_clk_setup); - -/* Used for clocks that always have same value as the parent clock */ -unsigned long followparent_recalc(struct clk *clk) -{ - return clk->parent->rate; -} - -/* - * Used for clocks that have the same value as the parent clock, - * divided by some factor - */ -unsigned long omap_fixed_divisor_recalc(struct clk *clk) -{ - WARN_ON(!clk->fixed_div); - - return clk->parent->rate / clk->fixed_div; -} - -void clk_reparent(struct clk *child, struct clk *parent) -{ - list_del_init(&child->sibling); - if (parent) - list_add(&child->sibling, &parent->children); - child->parent = parent; - - /* now do the debugfs renaming to reattach the child - to the proper parent */ -} - -/* Propagate rate to children */ -void propagate_rate(struct clk *tclk) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &tclk->children, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -static LIST_HEAD(root_clks); - -/** - * recalculate_root_clocks - recalculate and propagate all root clocks - * - * Recalculates all root clocks (clocks with no parent), which if the - * clock's .recalc is set correctly, should also propagate their rates. - * Called at init. - */ -void recalculate_root_clocks(void) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &root_clks, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -/** - * clk_preinit - initialize any fields in the struct clk before clk init - * @clk: struct clk * to initialize - * - * Initialize any struct clk fields needed before normal clk initialization - * can run. No return value. - */ -void clk_preinit(struct clk *clk) -{ - INIT_LIST_HEAD(&clk->children); -} - -int clk_register(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - /* - * trap out already registered clocks - */ - if (clk->node.next || clk->node.prev) - return 0; - - mutex_lock(&clocks_mutex); - if (clk->parent) - list_add(&clk->sibling, &clk->parent->children); - else - list_add(&clk->sibling, &root_clks); - - list_add(&clk->node, &clocks); - if (clk->init) - clk->init(clk); - mutex_unlock(&clocks_mutex); - - return 0; -} -EXPORT_SYMBOL(clk_register); - -void clk_unregister(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - list_del(&clk->sibling); - list_del(&clk->node); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unregister); - -void clk_enable_init_clocks(void) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &clocks, node) { - if (clkp->flags & ENABLE_ON_INIT) - clk_enable(clkp); - } -} - -int omap_clk_enable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->allow_idle) - c->ops->allow_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -int omap_clk_disable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->deny_idle) - c->ops->deny_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -/* - * Low level helpers - */ -static int clkll_enable_null(struct clk *clk) -{ - return 0; -} - -static void clkll_disable_null(struct clk *clk) -{ -} - -const struct clkops clkops_null = { - .enable = clkll_enable_null, - .disable = clkll_disable_null, -}; - -/* - * Dummy clock - * - * Used for clock aliases that are needed on some OMAPs, but not others - */ -struct clk dummy_ck = { - .name = "dummy", - .ops = &clkops_null, -}; - -/* - * - */ - -#ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Disable any unused clocks left on by the bootloader - */ -static int __init clk_disable_unused(void) -{ - struct clk *ck; - unsigned long flags; - - if (!arch_clock || !arch_clock->clk_disable_unused) - return 0; - - pr_info("clock: disabling unused clocks to save power\n"); - - spin_lock_irqsave(&clockfw_lock, flags); - list_for_each_entry(ck, &clocks, node) { - if (ck->ops == &clkops_null) - continue; - - if (ck->usecount > 0 || !ck->enable_reg) - continue; - - arch_clock->clk_disable_unused(ck); - } - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -late_initcall(clk_disable_unused); -late_initcall(omap_clk_enable_autoidle_all); -#endif - -int __init clk_init(struct clk_functions * custom_clocks) -{ - if (!custom_clocks) { - pr_err("No custom clock functions registered\n"); - BUG(); - } - - arch_clock = custom_clocks; - - return 0; -} - -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) -/* - * debugfs support to trace clock tree hierarchy and attributes - */ - -#include -#include - -static struct dentry *clk_debugfs_root; - -static int clk_dbg_show_summary(struct seq_file *s, void *unused) -{ - struct clk *c; - struct clk *pa; - - mutex_lock(&clocks_mutex); - seq_printf(s, "%-30s %-30s %-10s %s\n", - "clock-name", "parent-name", "rate", "use-count"); - - list_for_each_entry(c, &clocks, node) { - pa = c->parent; - seq_printf(s, "%-30s %-30s %-10lu %d\n", - c->name, pa ? pa->name : "none", c->rate, c->usecount); - } - mutex_unlock(&clocks_mutex); - - return 0; -} - -static int clk_dbg_open(struct inode *inode, struct file *file) -{ - return single_open(file, clk_dbg_show_summary, inode->i_private); -} - -static const struct file_operations debug_clock_fops = { - .open = clk_dbg_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int clk_debugfs_register_one(struct clk *c) -{ - int err; - struct dentry *d; - struct clk *pa = c->parent; - - d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); - if (!d) - return -ENOMEM; - c->dent = d; - - d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); - if (!d) { - err = -ENOMEM; - goto err_out; - } - return 0; - -err_out: - debugfs_remove_recursive(c->dent); - return err; -} - -static int clk_debugfs_register(struct clk *c) -{ - int err; - struct clk *pa = c->parent; - - if (pa && !pa->dent) { - err = clk_debugfs_register(pa); - if (err) - return err; - } - - if (!c->dent) { - err = clk_debugfs_register_one(c); - if (err) - return err; - } - return 0; -} - -static int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - int err; - - d = debugfs_create_dir("clock", NULL); - if (!d) - return -ENOMEM; - clk_debugfs_root = d; - - list_for_each_entry(c, &clocks, node) { - err = clk_debugfs_register(c); - if (err) - goto err_out; - } - - d = debugfs_create_file("summary", S_IRUGO, - d, NULL, &debug_clock_fops); - if (!d) - return -ENOMEM; - - return 0; -err_out: - debugfs_remove_recursive(clk_debugfs_root); - return err; -} -late_initcall(clk_debugfs_init); - -#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ -- cgit v1.2.3 From a135eaae524acba1509a3b19c97fae556e4da7cd Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 27 Sep 2012 10:33:34 -0600 Subject: ARM: OMAP: remove plat/clock.h Remove arch/arm/plat-omap/include/plat/clock.h by merging it into arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h. The goal here is to facilitate ARM single image kernels by removing includes via the "plat/" symlink. Signed-off-by: Paul Walmsley [tony@atomide.com: fixed to remove duplicate clock.h includes] Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/counter_32k.c | 1 - arch/arm/plat-omap/include/plat/clock.h | 309 -------------------------------- 2 files changed, 310 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/clock.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 8e847de4c744..66bf3f9324fe 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -23,7 +23,6 @@ #include #include "common.h" -#include /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ #define OMAP2_32KSYNCNT_REV_OFF 0x0 diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h deleted file mode 100644 index e2e2d045e428..000000000000 --- a/arch/arm/plat-omap/include/plat/clock.h +++ /dev/null @@ -1,309 +0,0 @@ -/* - * OMAP clock: data structure definitions, function prototypes, shared macros - * - * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation - * Written by Tuukka Tikkanen - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_CLOCK_H -#define __ARCH_ARM_OMAP_CLOCK_H - -#include - -struct module; -struct clk; -struct clockdomain; - -/* Temporary, needed during the common clock framework conversion */ -#define __clk_get_name(clk) (clk->name) -#define __clk_get_parent(clk) (clk->parent) -#define __clk_get_rate(clk) (clk->rate) - -/** - * struct clkops - some clock function pointers - * @enable: fn ptr that enables the current clock in hardware - * @disable: fn ptr that enables the current clock in hardware - * @find_idlest: function returning the IDLEST register for the clock's IP blk - * @find_companion: function returning the "companion" clk reg for the clock - * @allow_idle: fn ptr that enables autoidle for the current clock in hardware - * @deny_idle: fn ptr that disables autoidle for the current clock in hardware - * - * A "companion" clk is an accompanying clock to the one being queried - * that must be enabled for the IP module connected to the clock to - * become accessible by the hardware. Neither @find_idlest nor - * @find_companion should be needed; that information is IP - * block-specific; the hwmod code has been created to handle this, but - * until hwmod data is ready and drivers have been converted to use PM - * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and - * @find_companion must, unfortunately, remain. - */ -struct clkops { - int (*enable)(struct clk *); - void (*disable)(struct clk *); - void (*find_idlest)(struct clk *, void __iomem **, - u8 *, u8 *); - void (*find_companion)(struct clk *, void __iomem **, - u8 *); - void (*allow_idle)(struct clk *); - void (*deny_idle)(struct clk *); -}; - -#ifdef CONFIG_ARCH_OMAP2PLUS - -/* struct clksel_rate.flags possibilities */ -#define RATE_IN_242X (1 << 0) -#define RATE_IN_243X (1 << 1) -#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */ -#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */ -#define RATE_IN_36XX (1 << 4) -#define RATE_IN_4430 (1 << 5) -#define RATE_IN_TI816X (1 << 6) -#define RATE_IN_4460 (1 << 7) -#define RATE_IN_AM33XX (1 << 8) -#define RATE_IN_TI814X (1 << 9) - -#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) -#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) -#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX) -#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460) - -/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ -#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) - - -/** - * struct clksel_rate - register bitfield values corresponding to clk divisors - * @val: register bitfield value (shifted to bit 0) - * @div: clock divisor corresponding to @val - * @flags: (see "struct clksel_rate.flags possibilities" above) - * - * @val should match the value of a read from struct clk.clksel_reg - * AND'ed with struct clk.clksel_mask, shifted right to bit 0. - * - * @div is the divisor that should be applied to the parent clock's rate - * to produce the current clock's rate. - */ -struct clksel_rate { - u32 val; - u8 div; - u16 flags; -}; - -/** - * struct clksel - available parent clocks, and a pointer to their divisors - * @parent: struct clk * to a possible parent clock - * @rates: available divisors for this parent clock - * - * A struct clksel is always associated with one or more struct clks - * and one or more struct clksel_rates. - */ -struct clksel { - struct clk *parent; - const struct clksel_rate *rates; -}; - -/** - * struct dpll_data - DPLL registers and integration data - * @mult_div1_reg: register containing the DPLL M and N bitfields - * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg - * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg - * @clk_bypass: struct clk pointer to the clock's bypass clock input - * @clk_ref: struct clk pointer to the clock's reference clock input - * @control_reg: register containing the DPLL mode bitfield - * @enable_mask: mask of the DPLL mode bitfield in @control_reg - * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() - * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() - * @max_multiplier: maximum valid non-bypass multiplier value (actual) - * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() - * @min_divider: minimum valid non-bypass divider value (actual) - * @max_divider: maximum valid non-bypass divider value (actual) - * @modes: possible values of @enable_mask - * @autoidle_reg: register containing the DPLL autoidle mode bitfield - * @idlest_reg: register containing the DPLL idle status bitfield - * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg - * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg - * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg - * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg - * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs - * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs - * @flags: DPLL type/features (see below) - * - * Possible values for @flags: - * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) - * - * @freqsel_mask is only used on the OMAP34xx family and AM35xx. - * - * XXX Some DPLLs have multiple bypass inputs, so it's not technically - * correct to only have one @clk_bypass pointer. - * - * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, - * @last_rounded_n) should be separated from the runtime-fixed fields - * and placed into a different structure, so that the runtime-fixed data - * can be placed into read-only space. - */ -struct dpll_data { - void __iomem *mult_div1_reg; - u32 mult_mask; - u32 div1_mask; - struct clk *clk_bypass; - struct clk *clk_ref; - void __iomem *control_reg; - u32 enable_mask; - unsigned long last_rounded_rate; - u16 last_rounded_m; - u16 max_multiplier; - u8 last_rounded_n; - u8 min_divider; - u16 max_divider; - u8 modes; - void __iomem *autoidle_reg; - void __iomem *idlest_reg; - u32 autoidle_mask; - u32 freqsel_mask; - u32 idlest_mask; - u32 dco_mask; - u32 sddiv_mask; - u8 auto_recal_bit; - u8 recal_en_bit; - u8 recal_st_bit; - u8 flags; -}; - -#endif - -/* - * struct clk.flags possibilities - * - * XXX document the rest of the clock flags here - * - * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL - * bits share the same register. This flag allows the - * omap4_dpllmx*() code to determine which GATE_CTRL bit field - * should be used. This is a temporary solution - a better approach - * would be to associate clock type-specific data with the clock, - * similar to the struct dpll_data approach. - */ -#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ -#define CLOCK_IDLE_CONTROL (1 << 1) -#define CLOCK_NO_IDLE_PARENT (1 << 2) -#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ -#define CLOCK_CLKOUTX2 (1 << 5) - -/** - * struct clk - OMAP struct clk - * @node: list_head connecting this clock into the full clock list - * @ops: struct clkops * for this clock - * @name: the name of the clock in the hardware (used in hwmod data and debug) - * @parent: pointer to this clock's parent struct clk - * @children: list_head connecting to the child clks' @sibling list_heads - * @sibling: list_head connecting this clk to its parent clk's @children - * @rate: current clock rate - * @enable_reg: register to write to enable the clock (see @enable_bit) - * @recalc: fn ptr that returns the clock's current rate - * @set_rate: fn ptr that can change the clock's current rate - * @round_rate: fn ptr that can round the clock's current rate - * @init: fn ptr to do clock-specific initialization - * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) - * @usecount: number of users that have requested this clock to be enabled - * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div - * @flags: see "struct clk.flags possibilities" above - * @clksel_reg: for clksel clks, register va containing src/divisor select - * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector - * @clksel: for clksel clks, pointer to struct clksel for this clock - * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock - * @clkdm_name: clockdomain name that this clock is contained in - * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime - * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) - * @src_offset: bitshift for source selection bitfield (OMAP1 only) - * - * XXX @rate_offset, @src_offset should probably be removed and OMAP1 - * clock code converted to use clksel. - * - * XXX @usecount is poorly named. It should be "enable_count" or - * something similar. "users" in the description refers to kernel - * code (core code or drivers) that have called clk_enable() and not - * yet called clk_disable(); the usecount of parent clocks is also - * incremented by the clock code when clk_enable() is called on child - * clocks and decremented by the clock code when clk_disable() is - * called on child clocks. - * - * XXX @clkdm, @usecount, @children, @sibling should be marked for - * internal use only. - * - * @children and @sibling are used to optimize parent-to-child clock - * tree traversals. (child-to-parent traversals use @parent.) - * - * XXX The notion of the clock's current rate probably needs to be - * separated from the clock's target rate. - */ -struct clk { - struct list_head node; - const struct clkops *ops; - const char *name; - struct clk *parent; - struct list_head children; - struct list_head sibling; /* node for children */ - unsigned long rate; - void __iomem *enable_reg; - unsigned long (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); - u8 enable_bit; - s8 usecount; - u8 fixed_div; - u8 flags; -#ifdef CONFIG_ARCH_OMAP2PLUS - void __iomem *clksel_reg; - u32 clksel_mask; - const struct clksel *clksel; - struct dpll_data *dpll_data; - const char *clkdm_name; - struct clockdomain *clkdm; -#else - u8 rate_offset; - u8 src_offset; -#endif -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ -#endif -}; - -struct clk_functions { - int (*clk_enable)(struct clk *clk); - void (*clk_disable)(struct clk *clk); - long (*clk_round_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_parent)(struct clk *clk, struct clk *parent); - void (*clk_allow_idle)(struct clk *clk); - void (*clk_deny_idle)(struct clk *clk); - void (*clk_disable_unused)(struct clk *clk); -}; - -extern int mpurate; - -extern int clk_init(struct clk_functions *custom_clocks); -extern void clk_preinit(struct clk *clk); -extern int clk_register(struct clk *clk); -extern void clk_reparent(struct clk *child, struct clk *parent); -extern void clk_unregister(struct clk *clk); -extern void propagate_rate(struct clk *clk); -extern void recalculate_root_clocks(void); -extern unsigned long followparent_recalc(struct clk *clk); -extern void clk_enable_init_clocks(void); -unsigned long omap_fixed_divisor_recalc(struct clk *clk); -extern struct clk *omap_clk_get_by_name(const char *name); -extern int omap_clk_enable_autoidle_all(void); -extern int omap_clk_disable_autoidle_all(void); - -extern const struct clkops clkops_null; - -extern struct clk dummy_ck; - -#endif -- cgit v1.2.3 From e10dd62ffcb2953f80a4ea6ac53cb489ebfe0a79 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 27 Sep 2012 10:33:35 -0600 Subject: ARM: OMAP: clock: split plat/clkdev_omap.h into OMAP1/2 files To facilitate the ARM single image work, split arch/arm/plat-omap/include/plat/clkdev_omap.h into the arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h files. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/clkdev_omap.h | 51 --------------------------- 1 file changed, 51 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/clkdev_omap.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h deleted file mode 100644 index 025d85a3ee86..000000000000 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * clkdev <-> OMAP integration - * - * Russell King - * - */ - -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H - -#include - -struct omap_clk { - u16 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -/* Platform flags for the clkdev-OMAP integration code */ -#define CK_310 (1 << 0) -#define CK_7XX (1 << 1) /* 7xx, 850 */ -#define CK_1510 (1 << 2) -#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ -#define CK_242X (1 << 4) -#define CK_243X (1 << 5) /* 243x, 253x */ -#define CK_3430ES1 (1 << 6) /* 34xxES1 only */ -#define CK_3430ES2PLUS (1 << 7) /* 34xxES2, ES3, non-Sitara 35xx only */ -#define CK_AM35XX (1 << 9) /* Sitara AM35xx */ -#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */ -#define CK_443X (1 << 11) -#define CK_TI816X (1 << 12) -#define CK_446X (1 << 13) -#define CK_AM33XX (1 << 14) /* AM33xx specific clocks */ -#define CK_1710 (1 << 15) /* 1710 extra for rate selection */ - - -#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) -#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX) - - -#endif - -- cgit v1.2.3 From e4c060db2c13f10de09101afc564763f9fd0019a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 5 Oct 2012 13:25:59 -0700 Subject: ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 We want to remove plat/cpu.h. To do this, let's first split it to private soc.h to mach-omap1 and mach-omap2. We have to keep plat/cpu.h around until the remaining drivers are fixed, so let's include the local soc.h in plat/cpu.h and for drivers still including plat/cpu.h. Once the drivers are fixed not to include plat/cpu.h, we can remove the file. This is needed for the ARM common zImage support. [tony@atomide.com: updated to not print a warning] Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 4 +- arch/arm/plat-omap/i2c.c | 4 +- arch/arm/plat-omap/include/plat/cpu.h | 562 +--------------------------------- arch/arm/plat-omap/sram.c | 3 +- 4 files changed, 12 insertions(+), 561 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index b4dcd92a5845..49803cc18787 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -36,9 +36,11 @@ #include #include -#include #include +#include "../mach-omap1/soc.h" +#include "../mach-omap2/soc.h" + /* * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA * channels that an instance of the SDMA IP block can support. Used diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 37597a6bbed2..be6deb7c12ec 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -32,7 +32,9 @@ #include #include -#include + +#include "../mach-omap1/soc.h" +#include "../mach-omap2/soc.h" #include "i2c.h" diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index bfd9c5f5ee14..ba542ec8d513 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/cpu.h - * * OMAP cpu type detection * * Copyright (C) 2004, 2008 Nokia Corporation @@ -30,564 +28,12 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H -#ifndef __ASSEMBLY__ - -#include - -/* - * Test if multicore OMAP support is needed - */ -#undef MULTI_OMAP1 -#undef MULTI_OMAP2 -#undef OMAP_NAME - -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP850 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap850 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP15XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap1510 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap16xx -# endif -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS -# if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) -# error "OMAP1 and OMAP2PLUS can't be selected at the same time" -# endif -#endif -#ifdef CONFIG_SOC_OMAP2420 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2420 -# endif -#endif -#ifdef CONFIG_SOC_OMAP2430 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2430 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP3 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap3 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP4 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap4 -# endif -#endif - -#ifdef CONFIG_SOC_OMAP5 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap5 -# endif -#endif - -#ifdef CONFIG_SOC_AM33XX -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME am33xx -# endif +#ifdef CONFIG_ARCH_OMAP1 +#include "../../mach-omap1/soc.h" #endif -/* - * Omap device type i.e. EMU/HS/TST/GP/BAD - */ -#define OMAP2_DEVICE_TYPE_TEST 0 -#define OMAP2_DEVICE_TYPE_EMU 1 -#define OMAP2_DEVICE_TYPE_SEC 2 -#define OMAP2_DEVICE_TYPE_GP 3 -#define OMAP2_DEVICE_TYPE_BAD 4 - -int omap_type(void); - -/* - * omap_rev bits: - * CPU id bits (0730, 1510, 1710, 2422...) [31:16] - * CPU revision (See _REV_ defined in cpu.h) [15:08] - * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] - */ -unsigned int omap_rev(void); - -/* - * Get the CPU revision for OMAP devices - */ -#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) - -/* - * Macros to group OMAP into cpu classes. - * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730, OMAP850 - * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 - * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 - * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 - * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 - * cpu_is_omap243x(): True for OMAP2430 - * cpu_is_omap343x(): True for OMAP3430 - * cpu_is_omap443x(): True for OMAP4430 - * cpu_is_omap446x(): True for OMAP4460 - * cpu_is_omap447x(): True for OMAP4470 - * soc_is_omap543x(): True for OMAP5430, OMAP5432 - */ -#define GET_OMAP_CLASS (omap_rev() & 0xff) - -#define IS_OMAP_CLASS(class, id) \ -static inline int is_omap ##class (void) \ -{ \ - return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff) - -#define IS_AM_CLASS(class, id) \ -static inline int is_am ##class (void) \ -{ \ - return (GET_AM_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff) - -#define IS_TI_CLASS(class, id) \ -static inline int is_ti ##class (void) \ -{ \ - return (GET_TI_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) - -#define IS_OMAP_SUBCLASS(subclass, id) \ -static inline int is_omap ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -#define IS_TI_SUBCLASS(subclass, id) \ -static inline int is_ti ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -#define IS_AM_SUBCLASS(subclass, id) \ -static inline int is_am ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -IS_OMAP_CLASS(7xx, 0x07) -IS_OMAP_CLASS(15xx, 0x15) -IS_OMAP_CLASS(16xx, 0x16) -IS_OMAP_CLASS(24xx, 0x24) -IS_OMAP_CLASS(34xx, 0x34) -IS_OMAP_CLASS(44xx, 0x44) -IS_AM_CLASS(35xx, 0x35) -IS_OMAP_CLASS(54xx, 0x54) -IS_AM_CLASS(33xx, 0x33) - -IS_TI_CLASS(81xx, 0x81) - -IS_OMAP_SUBCLASS(242x, 0x242) -IS_OMAP_SUBCLASS(243x, 0x243) -IS_OMAP_SUBCLASS(343x, 0x343) -IS_OMAP_SUBCLASS(363x, 0x363) -IS_OMAP_SUBCLASS(443x, 0x443) -IS_OMAP_SUBCLASS(446x, 0x446) -IS_OMAP_SUBCLASS(447x, 0x447) -IS_OMAP_SUBCLASS(543x, 0x543) - -IS_TI_SUBCLASS(816x, 0x816) -IS_TI_SUBCLASS(814x, 0x814) -IS_AM_SUBCLASS(335x, 0x335) - -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 -#define cpu_is_omap24xx() 0 -#define cpu_is_omap242x() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap343x() 0 -#define cpu_is_ti81xx() 0 -#define cpu_is_ti816x() 0 -#define cpu_is_ti814x() 0 -#define soc_is_am35xx() 0 -#define soc_is_am33xx() 0 -#define soc_is_am335x() 0 -#define cpu_is_omap44xx() 0 -#define cpu_is_omap443x() 0 -#define cpu_is_omap446x() 0 -#define cpu_is_omap447x() 0 -#define soc_is_omap54xx() 0 -#define soc_is_omap543x() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() is_omap15xx() -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() is_omap16xx() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() 1 -# endif -#endif - -#if defined(MULTI_OMAP2) -# if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() is_omap24xx() -# endif -# if defined (CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() is_omap242x() -# endif -# if defined (CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() is_omap243x() -# endif -# if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# undef cpu_is_omap343x -# define cpu_is_omap34xx() is_omap34xx() -# define cpu_is_omap343x() is_omap343x() -# endif -#else -# if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() 1 -# endif -# if defined(CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() 1 -# endif -# if defined(CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() 1 -# endif -# if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# define cpu_is_omap34xx() 1 -# endif -# if defined(CONFIG_SOC_OMAP3430) -# undef cpu_is_omap343x -# define cpu_is_omap343x() 1 -# endif -#endif - -/* - * Macros to detect individual cpu types. - * These are only rarely needed. - * cpu_is_omap310(): True for OMAP310 - * cpu_is_omap1510(): True for OMAP1510 - * cpu_is_omap1610(): True for OMAP1610 - * cpu_is_omap1611(): True for OMAP1611 - * cpu_is_omap5912(): True for OMAP5912 - * cpu_is_omap1621(): True for OMAP1621 - * cpu_is_omap1710(): True for OMAP1710 - * cpu_is_omap2420(): True for OMAP2420 - * cpu_is_omap2422(): True for OMAP2422 - * cpu_is_omap2423(): True for OMAP2423 - * cpu_is_omap2430(): True for OMAP2430 - * cpu_is_omap3430(): True for OMAP3430 - */ -#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) - -#define IS_OMAP_TYPE(type, id) \ -static inline int is_omap ##type (void) \ -{ \ - return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ -} - -IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(1510, 0x1510) -IS_OMAP_TYPE(1610, 0x1610) -IS_OMAP_TYPE(1611, 0x1611) -IS_OMAP_TYPE(5912, 0x1611) -IS_OMAP_TYPE(1621, 0x1621) -IS_OMAP_TYPE(1710, 0x1710) -IS_OMAP_TYPE(2420, 0x2420) -IS_OMAP_TYPE(2422, 0x2422) -IS_OMAP_TYPE(2423, 0x2423) -IS_OMAP_TYPE(2430, 0x2430) -IS_OMAP_TYPE(3430, 0x3430) - -#define cpu_is_omap310() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap5912() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 -#define cpu_is_omap2420() 0 -#define cpu_is_omap2422() 0 -#define cpu_is_omap2423() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap3430() 0 -#define cpu_is_omap3630() 0 -#define soc_is_omap5430() 0 - -/* - * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 310 vs. 1510 and 1611B/5912 vs. 1710. - */ - -#if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap310 -# undef cpu_is_omap1510 -# define cpu_is_omap310() is_omap310() -# define cpu_is_omap1510() is_omap1510() -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap1610 -# undef cpu_is_omap1611 -# undef cpu_is_omap5912 -# undef cpu_is_omap1621 -# undef cpu_is_omap1710 -# define cpu_is_omap1610() is_omap1610() -# define cpu_is_omap1611() is_omap1611() -# define cpu_is_omap5912() is_omap5912() -# define cpu_is_omap1621() is_omap1621() -# define cpu_is_omap1710() is_omap1710() -#endif - -#if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap2420 -# undef cpu_is_omap2422 -# undef cpu_is_omap2423 -# undef cpu_is_omap2430 -# define cpu_is_omap2420() is_omap2420() -# define cpu_is_omap2422() is_omap2422() -# define cpu_is_omap2423() is_omap2423() -# define cpu_is_omap2430() is_omap2430() -#endif - -#if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap3430 -# undef cpu_is_ti81xx -# undef cpu_is_ti816x -# undef cpu_is_ti814x -# undef soc_is_am35xx -# define cpu_is_omap3430() is_omap3430() -# undef cpu_is_omap3630 -# define cpu_is_omap3630() is_omap363x() -# define cpu_is_ti81xx() is_ti81xx() -# define cpu_is_ti816x() is_ti816x() -# define cpu_is_ti814x() is_ti814x() -# define soc_is_am35xx() is_am35xx() -#endif - -# if defined(CONFIG_SOC_AM33XX) -# undef soc_is_am33xx -# undef soc_is_am335x -# define soc_is_am33xx() is_am33xx() -# define soc_is_am335x() is_am335x() -#endif - -# if defined(CONFIG_ARCH_OMAP4) -# undef cpu_is_omap44xx -# undef cpu_is_omap443x -# undef cpu_is_omap446x -# undef cpu_is_omap447x -# define cpu_is_omap44xx() is_omap44xx() -# define cpu_is_omap443x() is_omap443x() -# define cpu_is_omap446x() is_omap446x() -# define cpu_is_omap447x() is_omap447x() -# endif - -# if defined(CONFIG_SOC_OMAP5) -# undef soc_is_omap54xx -# undef soc_is_omap543x -# define soc_is_omap54xx() is_omap54xx() -# define soc_is_omap543x() is_omap543x() +#ifdef CONFIG_ARCH_OMAP2PLUS +#include "../../mach-omap2/soc.h" #endif -/* Macros to detect if we have OMAP1 or OMAP2 */ -#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ - cpu_is_omap16xx()) -#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx() || \ - soc_is_am33xx()) - -/* Various silicon revisions for omap2 */ -#define OMAP242X_CLASS 0x24200024 -#define OMAP2420_REV_ES1_0 OMAP242X_CLASS -#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8)) - -#define OMAP243X_CLASS 0x24300024 -#define OMAP2430_REV_ES1_0 OMAP243X_CLASS - -#define OMAP343X_CLASS 0x34300034 -#define OMAP3430_REV_ES1_0 OMAP343X_CLASS -#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8)) -#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8)) -#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8)) -#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8)) -#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8)) - -#define OMAP363X_CLASS 0x36300034 -#define OMAP3630_REV_ES1_0 OMAP363X_CLASS -#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) -#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) - -#define TI816X_CLASS 0x81600034 -#define TI8168_REV_ES1_0 TI816X_CLASS -#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) - -#define TI814X_CLASS 0x81400034 -#define TI8148_REV_ES1_0 TI814X_CLASS -#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8)) -#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8)) - -#define AM35XX_CLASS 0x35170034 -#define AM35XX_REV_ES1_0 AM35XX_CLASS -#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8)) - -#define AM335X_CLASS 0x33500033 -#define AM335X_REV_ES1_0 AM335X_CLASS - -#define OMAP443X_CLASS 0x44300044 -#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) -#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8)) -#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) -#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) -#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8)) - -#define OMAP446X_CLASS 0x44600044 -#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) -#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8)) - -#define OMAP447X_CLASS 0x44700044 -#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) - -#define OMAP54XX_CLASS 0x54000054 -#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) -#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) - -void omap2xxx_check_revision(void); -void omap3xxx_check_revision(void); -void omap4xxx_check_revision(void); -void omap5xxx_check_revision(void); -void omap3xxx_check_features(void); -void ti81xx_check_features(void); -void omap4xxx_check_features(void); - -/* - * Runtime detection of OMAP3 features - * - * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip - * family have OS-level control over the I/O chain clock. This is - * to avoid a window during which wakeups could potentially be lost - * during powerdomain transitions. If this bit is set, it - * indicates that the chip does support OS-level control of this - * feature. - */ -extern u32 omap_features; - -#define OMAP3_HAS_L2CACHE BIT(0) -#define OMAP3_HAS_IVA BIT(1) -#define OMAP3_HAS_SGX BIT(2) -#define OMAP3_HAS_NEON BIT(3) -#define OMAP3_HAS_ISP BIT(4) -#define OMAP3_HAS_192MHZ_CLK BIT(5) -#define OMAP3_HAS_IO_WAKEUP BIT(6) -#define OMAP3_HAS_SDRC BIT(7) -#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8) -#define OMAP4_HAS_MPU_1GHZ BIT(9) -#define OMAP4_HAS_MPU_1_2GHZ BIT(10) -#define OMAP4_HAS_MPU_1_5GHZ BIT(11) - - -#define OMAP3_HAS_FEATURE(feat,flag) \ -static inline unsigned int omap3_has_ ##feat(void) \ -{ \ - return omap_features & OMAP3_HAS_ ##flag; \ -} \ - -OMAP3_HAS_FEATURE(l2cache, L2CACHE) -OMAP3_HAS_FEATURE(sgx, SGX) -OMAP3_HAS_FEATURE(iva, IVA) -OMAP3_HAS_FEATURE(neon, NEON) -OMAP3_HAS_FEATURE(isp, ISP) -OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) -OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) -OMAP3_HAS_FEATURE(sdrc, SDRC) -OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL) - -/* - * Runtime detection of OMAP4 features - */ -#define OMAP4_HAS_FEATURE(feat, flag) \ -static inline unsigned int omap4_has_ ##feat(void) \ -{ \ - return omap_features & OMAP4_HAS_ ##flag; \ -} \ - -OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) -OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) -OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) - -#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index dc2d800d9598..70dcc225157f 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -25,7 +25,8 @@ #include -#include +#include "../mach-omap1/soc.h" +#include "../mach-omap2/soc.h" #include "sram.h" -- cgit v1.2.3 From 54ec52b6dd3b0ba4bc4eb97e7e1b2534705b326c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 3 Oct 2012 15:31:58 -0700 Subject: tty/serial/8250: Make omap hardware workarounds local to 8250.h This allows us to get rid of the ifdefs in 8250.c. Cc: Alan Cox Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman --- arch/arm/plat-omap/include/plat/serial.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 65fce44dce34..b780470d03ea 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -109,15 +109,6 @@ #define OMAP5UART4 OMAP4UART4 #define ZOOM_UART 95 /* Only on zoom2/3 */ -/* This is only used by 8250.c for omap1510 */ -#define is_omap_port(pt) ({int __ret = 0; \ - if ((pt)->port.mapbase == OMAP1_UART1_BASE || \ - (pt)->port.mapbase == OMAP1_UART2_BASE || \ - (pt)->port.mapbase == OMAP1_UART3_BASE) \ - __ret = 1; \ - __ret; \ - }) - #ifndef __ASSEMBLER__ struct omap_board_data; -- cgit v1.2.3 From ede8df1eaa19f96ee8520077885856eb63acb44b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 15 Oct 2012 12:50:38 -0700 Subject: ARM: OMAP: Split uncompress.h to mach-omap1 and mach-omap2 This allows us to eventually move omap2+ to generic debug code that's configured in Kconfig for the port. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/uncompress.h | 204 --------------------------- 1 file changed, 204 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/uncompress.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h deleted file mode 100644 index 7f7b112acccb..000000000000 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Initially based on: - * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon - * - * Rewritten by: - * Author: - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include - -#include -#include - -#include - -#define MDR1_MODE_MASK 0x07 - -volatile u8 *uart_base; -int uart_shift; - -/* - * Store the DEBUG_LL uart number into memory. - * See also debug-macro.S, and serial.c for related code. - */ -static void set_omap_uart_info(unsigned char port) -{ - /* - * Get address of some.bss variable and round it down - * a la CONFIG_AUTO_ZRELADDR. - */ - u32 ram_start = (u32)&uart_shift & 0xf8000000; - u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); - *uart_info = port; -} - -static void putc(int c) -{ - if (!uart_base) - return; - - /* Check for UART 16x mode */ - if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) - return; - - while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) - barrier(); - uart_base[UART_TX << uart_shift] = c; -} - -static inline void flush(void) -{ -} - -/* - * Macros to configure UART1 and debug UART - */ -#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ - if (machine_is_##mach()) { \ - uart_base = (volatile u8 *)(dbg_uart); \ - uart_shift = (dbg_shft); \ - port = (dbg_id); \ - set_omap_uart_info(port); \ - break; \ - } - -#define DEBUG_LL_OMAP7XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ - OMAP1UART##p) - -#define DEBUG_LL_OMAP1(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP1UART##p) - -#define DEBUG_LL_OMAP2(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP2UART##p) - -#define DEBUG_LL_OMAP3(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP3UART##p) - -#define DEBUG_LL_OMAP4(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP4UART##p) - -#define DEBUG_LL_OMAP5(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP5UART##p) -/* Zoom2/3 shift is different for UART1 and external port */ -#define DEBUG_LL_ZOOM(mach) \ - _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) - -#define DEBUG_LL_TI81XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ - TI81XXUART##p) - -#define DEBUG_LL_AM33XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ - AM33XXUART##p) - -static inline void arch_decomp_setup(void) -{ - int port = 0; - - /* - * Initialize the port based on the machine ID from the bootloader. - * Note that we're using macros here instead of switch statement - * as machine_is functions are optimized out for the boards that - * are not selected. - */ - do { - /* omap7xx/8xx based boards using UART1 with shift 0 */ - DEBUG_LL_OMAP7XX(1, herald); - DEBUG_LL_OMAP7XX(1, omap_perseus2); - - /* omap15xx/16xx based boards using UART1 */ - DEBUG_LL_OMAP1(1, ams_delta); - DEBUG_LL_OMAP1(1, nokia770); - DEBUG_LL_OMAP1(1, omap_h2); - DEBUG_LL_OMAP1(1, omap_h3); - DEBUG_LL_OMAP1(1, omap_innovator); - DEBUG_LL_OMAP1(1, omap_osk); - DEBUG_LL_OMAP1(1, omap_palmte); - DEBUG_LL_OMAP1(1, omap_palmz71); - - /* omap15xx/16xx based boards using UART2 */ - DEBUG_LL_OMAP1(2, omap_palmtt); - - /* omap15xx/16xx based boards using UART3 */ - DEBUG_LL_OMAP1(3, sx1); - - /* omap2 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap_2430sdp); - DEBUG_LL_OMAP2(1, omap_apollon); - DEBUG_LL_OMAP2(1, omap_h4); - - /* omap2 based boards using UART3 */ - DEBUG_LL_OMAP2(3, nokia_n800); - DEBUG_LL_OMAP2(3, nokia_n810); - DEBUG_LL_OMAP2(3, nokia_n810_wimax); - - /* omap3 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap3evm); - DEBUG_LL_OMAP3(1, omap_3430sdp); - DEBUG_LL_OMAP3(1, omap_3630sdp); - DEBUG_LL_OMAP3(1, omap3530_lv_som); - DEBUG_LL_OMAP3(1, omap3_torpedo); - - /* omap3 based boards using UART3 */ - DEBUG_LL_OMAP3(3, cm_t35); - DEBUG_LL_OMAP3(3, cm_t3517); - DEBUG_LL_OMAP3(3, cm_t3730); - DEBUG_LL_OMAP3(3, craneboard); - DEBUG_LL_OMAP3(3, devkit8000); - DEBUG_LL_OMAP3(3, igep0020); - DEBUG_LL_OMAP3(3, igep0030); - DEBUG_LL_OMAP3(3, nokia_rm680); - DEBUG_LL_OMAP3(3, nokia_rm696); - DEBUG_LL_OMAP3(3, nokia_rx51); - DEBUG_LL_OMAP3(3, omap3517evm); - DEBUG_LL_OMAP3(3, omap3_beagle); - DEBUG_LL_OMAP3(3, omap3_pandora); - DEBUG_LL_OMAP3(3, omap_ldp); - DEBUG_LL_OMAP3(3, overo); - DEBUG_LL_OMAP3(3, touchbook); - - /* omap4 based boards using UART3 */ - DEBUG_LL_OMAP4(3, omap_4430sdp); - DEBUG_LL_OMAP4(3, omap4_panda); - - /* omap5 based boards using UART3 */ - DEBUG_LL_OMAP5(3, omap5_sevm); - - /* zoom2/3 external uart */ - DEBUG_LL_ZOOM(omap_zoom2); - DEBUG_LL_ZOOM(omap_zoom3); - - /* TI8168 base boards using UART3 */ - DEBUG_LL_TI81XX(3, ti8168evm); - - /* TI8148 base boards using UART1 */ - DEBUG_LL_TI81XX(1, ti8148evm); - - /* AM33XX base boards using UART1 */ - DEBUG_LL_AM33XX(1, am335xevm); - } while (0); -} - -/* - * nothing to do - */ -#define arch_decomp_wdog() -- cgit v1.2.3 From 3d82cbbb3aadb4f8a30e3f614e51be96574a0855 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 15 Oct 2012 12:50:46 -0700 Subject: ARM: OMAP: Split plat/serial.h for omap1 and omap2+ For omap1, we'll keep mach/serial.h around for 8250.c hardware workarounds. For omap2+, we no longer need mach/serial.h and can make it local to mach-omap2. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/serial.h | 123 ------------------------------- 1 file changed, 123 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/serial.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h deleted file mode 100644 index b780470d03ea..000000000000 --- a/arch/arm/plat-omap/include/plat/serial.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/serial.h - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support- Santosh Shilimkar - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#include - -/* - * Memory entry used for the DEBUG_LL UART configuration, relative to - * start of RAM. See also uncompress.h and debug-macro.S. - * - * Note that using a memory location for storing the UART configuration - * has at least two limitations: - * - * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the - * uncompress code could then partially overwrite itself - * 2. We assume printascii is called at least once before paging_init, - * and addruart has a chance to read OMAP_UART_INFO - */ -#define OMAP_UART_INFO_OFS 0x3ffc - -/* OMAP1 serial ports */ -#define OMAP1_UART1_BASE 0xfffb0000 -#define OMAP1_UART2_BASE 0xfffb0800 -#define OMAP1_UART3_BASE 0xfffb9800 - -/* OMAP2 serial ports */ -#define OMAP2_UART1_BASE 0x4806a000 -#define OMAP2_UART2_BASE 0x4806c000 -#define OMAP2_UART3_BASE 0x4806e000 - -/* OMAP3 serial ports */ -#define OMAP3_UART1_BASE OMAP2_UART1_BASE -#define OMAP3_UART2_BASE OMAP2_UART2_BASE -#define OMAP3_UART3_BASE 0x49020000 -#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ -#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ - -/* OMAP4 serial ports */ -#define OMAP4_UART1_BASE OMAP2_UART1_BASE -#define OMAP4_UART2_BASE OMAP2_UART2_BASE -#define OMAP4_UART3_BASE 0x48020000 -#define OMAP4_UART4_BASE 0x4806e000 - -/* TI81XX serial ports */ -#define TI81XX_UART1_BASE 0x48020000 -#define TI81XX_UART2_BASE 0x48022000 -#define TI81XX_UART3_BASE 0x48024000 - -/* AM3505/3517 UART4 */ -#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ - -/* AM33XX serial port */ -#define AM33XX_UART1_BASE 0x44E09000 - -/* OMAP5 serial ports */ -#define OMAP5_UART1_BASE OMAP2_UART1_BASE -#define OMAP5_UART2_BASE OMAP2_UART2_BASE -#define OMAP5_UART3_BASE OMAP4_UART3_BASE -#define OMAP5_UART4_BASE OMAP4_UART4_BASE -#define OMAP5_UART5_BASE 0x48066000 -#define OMAP5_UART6_BASE 0x48068000 - -/* External port on Zoom2/3 */ -#define ZOOM_UART_BASE 0x10000000 -#define ZOOM_UART_VIRT 0xfa400000 - -#define OMAP_PORT_SHIFT 2 -#define OMAP7XX_PORT_SHIFT 0 -#define ZOOM_PORT_SHIFT 1 - -#define OMAP1510_BASE_BAUD (12000000/16) -#define OMAP16XX_BASE_BAUD (48000000/16) -#define OMAP24XX_BASE_BAUD (48000000/16) - -/* - * DEBUG_LL port encoding stored into the UART1 scratchpad register by - * decomp_setup in uncompress.h - */ -#define OMAP1UART1 11 -#define OMAP1UART2 12 -#define OMAP1UART3 13 -#define OMAP2UART1 21 -#define OMAP2UART2 22 -#define OMAP2UART3 23 -#define OMAP3UART1 OMAP2UART1 -#define OMAP3UART2 OMAP2UART2 -#define OMAP3UART3 33 -#define OMAP3UART4 34 /* Only on 36xx */ -#define OMAP4UART1 OMAP2UART1 -#define OMAP4UART2 OMAP2UART2 -#define OMAP4UART3 43 -#define OMAP4UART4 44 -#define TI81XXUART1 81 -#define TI81XXUART2 82 -#define TI81XXUART3 83 -#define AM33XXUART1 84 -#define OMAP5UART3 OMAP4UART3 -#define OMAP5UART4 OMAP4UART4 -#define ZOOM_UART 95 /* Only on zoom2/3 */ - -#ifndef __ASSEMBLER__ - -struct omap_board_data; -struct omap_uart_port_info; - -extern void omap_serial_init(void); -extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); -extern void omap_serial_init_port(struct omap_board_data *bdata, - struct omap_uart_port_info *platform_data); -#endif - -#endif -- cgit v1.2.3 From 54db6eee06b51278a79e007765151fb5e71c370c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 24 Oct 2012 14:26:18 -0700 Subject: ARM: OMAP2+: Introduce local usb.h Let's move what we can from plat/usb.h to the local usb.h for ARM common zImage support. This is needed so we can remove plat/usb.h for ARM common zImage support. Cc: Samuel Ortiz Cc: Alan Stern Cc: Greg Kroah-Hartman Cc: Partha Basak Cc: Keshava Munegowda Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/usb.h | 106 ---------------------------------- 1 file changed, 106 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 87ee140fefaa..1dd6522a0edd 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -26,24 +26,6 @@ enum usbhs_omap_port_mode { OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM }; -struct usbhs_omap_board_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - - /* have to be valid if phy_reset is true and portx is in phy mode */ - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - - /* Set this to true for ES2.x silicon */ - unsigned es2_compatibility:1; - - unsigned phy_reset:1; - - /* - * Regulators for USB PHYs. - * Each PHY can have a separate regulator. - */ - struct regulator *regulator[OMAP3_HS_USB_PORTS]; -}; - #ifdef CONFIG_ARCH_OMAP2PLUS struct ehci_hcd_omap_platform_data { @@ -83,97 +65,9 @@ struct omap_musb_board_data { enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; -extern void usb_musb_init(struct omap_musb_board_data *board_data); - -extern void usbhs_init(const struct usbhs_omap_board_data *pdata); extern int omap_tll_enable(void); extern int omap_tll_disable(void); -extern int omap4430_phy_power(struct device *dev, int ID, int on); -extern int omap4430_phy_set_clk(struct device *dev, int on); -extern int omap4430_phy_init(struct device *dev); -extern int omap4430_phy_exit(struct device *dev); -extern int omap4430_phy_suspend(struct device *dev, int suspend); - -#endif - -extern void am35x_musb_reset(void); -extern void am35x_musb_phy_power(u8 on); -extern void am35x_musb_clear_irq(void); -extern void am35x_set_mode(u8 musb_mode); -extern void ti81xx_musb_phy_power(u8 on); - -/* AM35x */ -/* USB 2.0 PHY Control */ -#define CONF2_PHY_GPIOMODE (1 << 23) -#define CONF2_OTGMODE (3 << 14) -#define CONF2_NO_OVERRIDE (0 << 14) -#define CONF2_FORCE_HOST (1 << 14) -#define CONF2_FORCE_DEVICE (2 << 14) -#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14) -#define CONF2_SESENDEN (1 << 13) -#define CONF2_VBDTCTEN (1 << 12) -#define CONF2_REFFREQ_24MHZ (2 << 8) -#define CONF2_REFFREQ_26MHZ (7 << 8) -#define CONF2_REFFREQ_13MHZ (6 << 8) -#define CONF2_REFFREQ (0xf << 8) -#define CONF2_PHYCLKGD (1 << 7) -#define CONF2_VBUSSENSE (1 << 6) -#define CONF2_PHY_PLLON (1 << 5) -#define CONF2_RESET (1 << 4) -#define CONF2_PHYPWRDN (1 << 3) -#define CONF2_OTGPWRDN (1 << 2) -#define CONF2_DATPOL (1 << 1) - -/* TI81XX specific definitions */ -#define USBCTRL0 0x620 -#define USBSTAT0 0x624 - -/* TI816X PHY controls bits */ -#define TI816X_USBPHY0_NORMAL_MODE (1 << 0) -#define TI816X_USBPHY_REFCLK_OSC (1 << 8) - -/* TI814X PHY controls bits */ -#define USBPHY_CM_PWRDN (1 << 0) -#define USBPHY_OTG_PWRDN (1 << 1) -#define USBPHY_CHGDET_DIS (1 << 2) -#define USBPHY_CHGDET_RSTRT (1 << 3) -#define USBPHY_SRCONDM (1 << 4) -#define USBPHY_SINKONDP (1 << 5) -#define USBPHY_CHGISINK_EN (1 << 6) -#define USBPHY_CHGVSRC_EN (1 << 7) -#define USBPHY_DMPULLUP (1 << 8) -#define USBPHY_DPPULLUP (1 << 9) -#define USBPHY_CDET_EXTCTL (1 << 10) -#define USBPHY_GPIO_MODE (1 << 12) -#define USBPHY_DPOPBUFCTL (1 << 13) -#define USBPHY_DMOPBUFCTL (1 << 14) -#define USBPHY_DPINPUT (1 << 15) -#define USBPHY_DMINPUT (1 << 16) -#define USBPHY_DPGPIO_PD (1 << 17) -#define USBPHY_DMGPIO_PD (1 << 18) -#define USBPHY_OTGVDET_EN (1 << 19) -#define USBPHY_OTGSESSEND_EN (1 << 20) -#define USBPHY_DATA_POLARITY (1 << 23) - -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB) -u32 omap1_usb0_init(unsigned nwires, unsigned is_device); -u32 omap1_usb1_init(unsigned nwires); -u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup); -#else -static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device) -{ - return 0; -} -static inline u32 omap1_usb1_init(unsigned nwires) -{ - return 0; - -} -static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) -{ - return 0; -} #endif #endif /* __ASM_ARCH_OMAP_USB_H */ -- cgit v1.2.3 From e8c4a7acc9ec0ee82feedcdc3c6d0ee44d67918a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 24 Oct 2012 14:26:19 -0700 Subject: ARM: OMAP: move OMAP USB platform data to In order to make single zImage work for ARM architecture, we need to make sure we don't depend on private headers. Move USB platform_data to and add a minimal drivers/mfd/usb-omap.h. Cc: Samuel Ortiz Cc: Alan Stern Cc: Greg Kroah-Hartman Cc: Partha Basak Cc: Keshava Munegowda Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi [tony@atomide.com: updated for local mfd/usb-omap.h] Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/usb.h | 73 ----------------------------------- 1 file changed, 73 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/usb.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h deleted file mode 100644 index 1dd6522a0edd..000000000000 --- a/arch/arm/plat-omap/include/plat/usb.h +++ /dev/null @@ -1,73 +0,0 @@ -// include/asm-arm/mach-omap/usb.h - -#ifndef __ASM_ARCH_OMAP_USB_H -#define __ASM_ARCH_OMAP_USB_H - -#include -#include -#include - -#define OMAP3_HS_USB_PORTS 3 - -enum usbhs_omap_port_mode { - OMAP_USBHS_PORT_MODE_UNUSED, - OMAP_EHCI_PORT_MODE_PHY, - OMAP_EHCI_PORT_MODE_TLL, - OMAP_EHCI_PORT_MODE_HSIC, - OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0, - OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM, - OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0, - OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM -}; - -#ifdef CONFIG_ARCH_OMAP2PLUS - -struct ehci_hcd_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - struct regulator *regulator[OMAP3_HS_USB_PORTS]; - unsigned phy_reset:1; -}; - -struct ohci_hcd_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - unsigned es2_compatibility:1; -}; - -struct usbhs_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - - struct ehci_hcd_omap_platform_data *ehci_data; - struct ohci_hcd_omap_platform_data *ohci_data; -}; - -struct usbtll_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; -}; -/*-------------------------------------------------------------------------*/ - -struct omap_musb_board_data { - u8 interface_type; - u8 mode; - u16 power; - unsigned extvbus:1; - void (*set_phy_power)(u8 on); - void (*clear_irq)(void); - void (*set_mode)(u8 mode); - void (*reset)(void); -}; - -enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; - -extern int omap_tll_enable(void); -extern int omap_tll_disable(void); - -#endif - -#endif /* __ASM_ARCH_OMAP_USB_H */ -- cgit v1.2.3 From bf027ca13738b1548910351952c3fe9b63263a9a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 29 Oct 2012 13:54:06 -0700 Subject: ARM: OMAP: Split sram.h to local headers and minimal shared header Most of the defines are specific to omap1 and omap2+, and should be in the local headers. Only minimal function prototypes need to be shared. As discussed on linux-arm-kernel, we want to avoid relative includes for the arch/arm/*omap* shared code: http://www.spinics.net/lists/linux-omap/msg80520.html So this patch re-adds a minimal plat/sram.h. The new plat/sram.h must not be included from drivers, that will break build for omap2+ CONFIG_MULTIPLATFORM. Note that this patch temporarily adds two more relative includes; Those will be removed in the following patch. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/sram.h | 12 ++++ arch/arm/plat-omap/sram.c | 5 +- arch/arm/plat-omap/sram.h | 107 --------------------------------- 3 files changed, 15 insertions(+), 109 deletions(-) create mode 100644 arch/arm/plat-omap/include/plat/sram.h delete mode 100644 arch/arm/plat-omap/sram.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h new file mode 100644 index 000000000000..c60025a45ee1 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -0,0 +1,12 @@ +int omap_sram_init(void); + +extern void *omap_sram_push_address(unsigned long size); + +/* Macro to push a function to the internal SRAM, using the fncpy API */ +#define omap_sram_push(funcp, size) ({ \ + typeof(&(funcp)) _res = NULL; \ + void *_sram_address = omap_sram_push_address(size); \ + if (_sram_address) \ + _res = fncpy(_sram_address, &(funcp), size); \ + _res; \ +}) diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 70dcc225157f..337292935256 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -20,15 +20,16 @@ #include #include +#include #include #include #include #include "../mach-omap1/soc.h" +#include "../mach-omap1/sram.h" #include "../mach-omap2/soc.h" - -#include "sram.h" +#include "../mach-omap2/sram.h" /* XXX These "sideways" includes will disappear when sram.c becomes a driver */ #include "../mach-omap2/iomap.h" diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h deleted file mode 100644 index cefda2e09869..000000000000 --- a/arch/arm/plat-omap/sram.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/sram.h - * - * Interface for functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - -#ifndef __ASSEMBLY__ -#include - -int __init omap_sram_init(void); - -extern void *omap_sram_push_address(unsigned long size); - -/* Macro to push a function to the internal SRAM, using the fncpy API */ -#define omap_sram_push(funcp, size) ({ \ - typeof(&(funcp)) _res = NULL; \ - void *_sram_address = omap_sram_push_address(size); \ - if (_sram_address) \ - _res = fncpy(_sram_address, &(funcp), size); \ - _res; \ -}) - -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); - -extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -extern u32 omap3_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern void omap3_sram_restore_context(void); - -/* Do not use these */ -extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap1_sram_reprogram_clock_sz; - -extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap24xx_sram_reprogram_clock_sz; - -extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap242x_sram_ddr_init_sz; - -extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap242x_sram_set_prcm_sz; - -extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap242x_sram_reprogram_sdrc_sz; - - -extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap243x_sram_ddr_init_sz; - -extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap243x_sram_set_prcm_sz; - -extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -extern u32 omap3_sram_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern unsigned long omap3_sram_configure_core_dpll_sz; - -#ifdef CONFIG_PM -extern void omap_push_sram_idle(void); -#else -static inline void omap_push_sram_idle(void) {} -#endif /* CONFIG_PM */ - -#endif /* __ASSEMBLY__ */ - -/* - * OMAP2+: define the SRAM PA addresses. - * Used by the SRAM management code and the idle sleep code. - */ -#define OMAP2_SRAM_PA 0x40200000 -#define OMAP3_SRAM_PA 0x40200000 -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PA 0x40304000 -#define OMAP4_SRAM_VA 0xfe404000 -#else -#define OMAP4_SRAM_PA 0x40300000 -#endif -#define AM33XX_SRAM_PA 0x40300000 -#endif -- cgit v1.2.3 From d8cfd6c8b4f58b0c09811eefa4b9e022c75099f7 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 29 Oct 2012 14:36:25 -0700 Subject: ARM: OMAP: Introduce common omap_map_sram() and omap_sram_reset() This will allow us to separate out omap1 and omap2+ specific code in the later patches. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/sram.h | 4 +++ arch/arm/plat-omap/sram.c | 64 ++++++++++++++++++++++------------ 2 files changed, 46 insertions(+), 22 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index c60025a45ee1..ba4525059a99 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -1,5 +1,9 @@ int omap_sram_init(void); +void omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached); +void omap_sram_reset(void); + extern void *omap_sram_push_address(unsigned long size); /* Macro to push a function to the internal SRAM, using the fncpy API */ diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 337292935256..aa2644a1ca83 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -170,13 +170,10 @@ static void __init omap_detect_sram(void) /* * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. */ -static void __init omap_map_sram(void) +static void __init omap_fix_and_map_sram(void) { int cached = 1; - if (omap_sram_size == 0) - return; - #ifdef CONFIG_OMAP4_ERRATA_I688 if (cpu_is_omap44xx()) { omap_sram_start += PAGE_SIZE; @@ -194,22 +191,8 @@ static void __init omap_map_sram(void) cached = 0; } - omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE); - omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, - cached); - if (!omap_sram_base) { - pr_err("SRAM: Could not map\n"); - return; - } - - omap_sram_ceil = omap_sram_base + omap_sram_size; - - /* - * Looks like we need to preserve some bootloader code at the - * beginning of SRAM for jumping to flash for reboot to work... - */ - memset_io(omap_sram_base + omap_sram_skip, 0, - omap_sram_size - omap_sram_skip); + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, cached); } /* @@ -237,6 +220,43 @@ void *omap_sram_push_address(unsigned long size) return (void *)omap_sram_ceil; } +/* + * The SRAM context is lost during off-idle and stack + * needs to be reset. + */ +void omap_sram_reset(void) +{ + omap_sram_ceil = omap_sram_base + omap_sram_size; +} + +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +void __init omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached) +{ + if (size == 0) + return; + + start = ROUND_DOWN(start, PAGE_SIZE); + omap_sram_size = size; + omap_sram_skip = skip; + omap_sram_base = __arm_ioremap_exec(start, size, cached); + if (!omap_sram_base) { + pr_err("SRAM: Could not map\n"); + return; + } + + omap_sram_reset(); + + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); +} + #ifdef CONFIG_ARCH_OMAP1 static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); @@ -362,7 +382,7 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, void omap3_sram_restore_context(void) { - omap_sram_ceil = omap_sram_base + omap_sram_size; + omap_sram_reset(); _omap3_sram_configure_core_dpll = omap_sram_push(omap3_sram_configure_core_dpll, @@ -390,7 +410,7 @@ static inline int am33xx_sram_init(void) int __init omap_sram_init(void) { omap_detect_sram(); - omap_map_sram(); + omap_fix_and_map_sram(); if (!(cpu_class_is_omap2())) omap1_sram_init(); -- cgit v1.2.3 From f205cfaf6c1287aca040c51c1789b46ed63a4d78 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 29 Oct 2012 14:46:30 -0700 Subject: ARM: OMAP: Move omap1 specific code to local sram.c Let's make the omap1 specific parts private to mach-omap1. These should not be in the shared code. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/sram.c | 49 +++-------------------------------------------- 1 file changed, 3 insertions(+), 46 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index aa2644a1ca83..6fd32162964f 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -26,8 +26,6 @@ #include -#include "../mach-omap1/soc.h" -#include "../mach-omap1/sram.h" #include "../mach-omap2/soc.h" #include "../mach-omap2/sram.h" @@ -36,7 +34,6 @@ #include "../mach-omap2/prm2xxx_3xxx.h" #include "../mach-omap2/sdrc.h" -#define OMAP1_SRAM_PA 0x20000000 #define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) #define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) #ifdef CONFIG_OMAP4_ERRATA_I688 @@ -150,20 +147,6 @@ static void __init omap_detect_sram(void) omap_sram_size = 0x10000; /* 64K */ } } - } else { - omap_sram_start = OMAP1_SRAM_PA; - - if (cpu_is_omap7xx()) - omap_sram_size = 0x32000; /* 200K */ - else if (cpu_is_omap15xx()) - omap_sram_size = 0x30000; /* 192K */ - else if (cpu_is_omap1610() || cpu_is_omap1611() || - cpu_is_omap1621() || cpu_is_omap1710()) - omap_sram_size = 0x4000; /* 16K */ - else { - pr_err("Could not detect SRAM size\n"); - omap_sram_size = 0x4000; - } } } @@ -257,32 +240,6 @@ void __init omap_map_sram(unsigned long start, unsigned long size, omap_sram_size - omap_sram_skip); } -#ifdef CONFIG_ARCH_OMAP1 - -static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); - -void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) -{ - BUG_ON(!_omap_sram_reprogram_clock); - /* On 730, bit 13 must always be 1 */ - if (cpu_is_omap7xx()) - ckctl |= 0x2000; - _omap_sram_reprogram_clock(dpllctl, ckctl); -} - -static int __init omap1_sram_init(void) -{ - _omap_sram_reprogram_clock = - omap_sram_push(omap1_sram_reprogram_clock, - omap1_sram_reprogram_clock_sz); - - return 0; -} - -#else -#define omap1_sram_init() do {} while (0) -#endif - #if defined(CONFIG_ARCH_OMAP2) static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, @@ -407,14 +364,13 @@ static inline int am33xx_sram_init(void) return 0; } +#ifdef CONFIG_ARCH_OMAP2PLUS int __init omap_sram_init(void) { omap_detect_sram(); omap_fix_and_map_sram(); - if (!(cpu_class_is_omap2())) - omap1_sram_init(); - else if (cpu_is_omap242x()) + if (cpu_is_omap242x()) omap242x_sram_init(); else if (cpu_is_omap2430()) omap243x_sram_init(); @@ -425,3 +381,4 @@ int __init omap_sram_init(void) return 0; } +#endif -- cgit v1.2.3 From bb77209432873214a796a70a4539e4ebdf3feb54 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 29 Oct 2012 09:35:35 -0700 Subject: ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2 Let's make the omap2+ specific parts private to mach-omap2. This leaves just a minimal shared code into plat-omap like it should be. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/sram.c | 288 ---------------------------------------------- 1 file changed, 288 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 6fd32162964f..743fc2836f7a 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -26,158 +26,13 @@ #include -#include "../mach-omap2/soc.h" -#include "../mach-omap2/sram.h" - -/* XXX These "sideways" includes will disappear when sram.c becomes a driver */ -#include "../mach-omap2/iomap.h" -#include "../mach-omap2/prm2xxx_3xxx.h" -#include "../mach-omap2/sdrc.h" - -#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) -#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA -#else -#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) -#endif -#define OMAP5_SRAM_PA 0x40300000 - -#if defined(CONFIG_ARCH_OMAP2PLUS) -#define SRAM_BOOTLOADER_SZ 0x00 -#else -#define SRAM_BOOTLOADER_SZ 0x80 -#endif - -#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) -#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) -#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) - -#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) -#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) -#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) -#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) -#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) - -#define GP_DEVICE 0x300 - #define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) -static unsigned long omap_sram_start; static void __iomem *omap_sram_base; static unsigned long omap_sram_skip; static unsigned long omap_sram_size; static void __iomem *omap_sram_ceil; -/* - * Depending on the target RAMFS firewall setup, the public usable amount of - * SRAM varies. The default accessible size for all device types is 2k. A GP - * device allows ARM11 but not other initiators for full size. This - * functionality seems ok until some nice security API happens. - */ -static int is_sram_locked(void) -{ - if (OMAP2_DEVICE_TYPE_GP == omap_type()) { - /* RAMFW: R/W access to all initiators for all qualifier sets */ - if (cpu_is_omap242x()) { - __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ - } - if (cpu_is_omap34xx()) { - __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ - __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); - __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); - } - return 0; - } else - return 1; /* assume locked with no PPA or security driver */ -} - -/* - * The amount of SRAM depends on the core type. - * Note that we cannot try to test for SRAM here because writes - * to secure SRAM will hang the system. Also the SRAM is not - * yet mapped at this point. - */ -static void __init omap_detect_sram(void) -{ - omap_sram_skip = SRAM_BOOTLOADER_SZ; - if (cpu_class_is_omap2()) { - if (is_sram_locked()) { - if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PUB_PA; - if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || - (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { - omap_sram_size = 0x7000; /* 28K */ - omap_sram_skip += SZ_16K; - } else { - omap_sram_size = 0x8000; /* 32K */ - } - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PUB_PA; - omap_sram_size = 0xa000; /* 40K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PUB_PA; - omap_sram_size = 0x800; /* 2K */ - } - } else { - if (soc_is_am33xx()) { - omap_sram_start = AM33XX_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PA; - omap_sram_size = 0xe000; /* 56K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PA; - if (cpu_is_omap242x()) - omap_sram_size = 0xa0000; /* 640K */ - else if (cpu_is_omap243x()) - omap_sram_size = 0x10000; /* 64K */ - } - } - } -} - -/* - * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. - */ -static void __init omap_fix_and_map_sram(void) -{ - int cached = 1; - -#ifdef CONFIG_OMAP4_ERRATA_I688 - if (cpu_is_omap44xx()) { - omap_sram_start += PAGE_SIZE; - omap_sram_size -= SZ_16K; - } -#endif - if (cpu_is_omap34xx()) { - /* - * SRAM must be marked as non-cached on OMAP3 since the - * CORE DPLL M2 divider change code (in SRAM) runs with the - * SDRAM controller disabled, and if it is marked cached, - * the ARM may attempt to write cache lines back to SDRAM - * which will cause the system to hang. - */ - cached = 0; - } - - omap_map_sram(omap_sram_start, omap_sram_size, - omap_sram_skip, cached); -} - /* * Memory allocator for SRAM: calculates the new ceiling address * for pushing a function using the fncpy API. @@ -239,146 +94,3 @@ void __init omap_map_sram(unsigned long start, unsigned long size, memset_io(omap_sram_base + omap_sram_skip, 0, omap_sram_size - omap_sram_skip); } - -#if defined(CONFIG_ARCH_OMAP2) - -static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); - -void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock) -{ - BUG_ON(!_omap2_sram_ddr_init); - _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, - base_cs, force_unlock); -} - -static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, - u32 mem_type); - -void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) -{ - BUG_ON(!_omap2_sram_reprogram_sdrc); - _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); -} - -static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) -{ - BUG_ON(!_omap2_set_prcm); - return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); -} -#endif - -#ifdef CONFIG_SOC_OMAP2420 -static int __init omap242x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, - omap242x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, - omap242x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, - omap242x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap242x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_SOC_OMAP2430 -static int __init omap243x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, - omap243x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, - omap243x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, - omap243x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap243x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 - -static u32 (*_omap3_sram_configure_core_dpll)( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); - -u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) -{ - BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll( - m2, unlock_dll, f, inc, - sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, - sdrc_actim_ctrl_b_0, sdrc_mr_0, - sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, - sdrc_actim_ctrl_b_1, sdrc_mr_1); -} - -void omap3_sram_restore_context(void) -{ - omap_sram_reset(); - - _omap3_sram_configure_core_dpll = - omap_sram_push(omap3_sram_configure_core_dpll, - omap3_sram_configure_core_dpll_sz); - omap_push_sram_idle(); -} - -static inline int omap34xx_sram_init(void) -{ - omap3_sram_restore_context(); - return 0; -} -#else -static inline int omap34xx_sram_init(void) -{ - return 0; -} -#endif /* CONFIG_ARCH_OMAP3 */ - -static inline int am33xx_sram_init(void) -{ - return 0; -} - -#ifdef CONFIG_ARCH_OMAP2PLUS -int __init omap_sram_init(void) -{ - omap_detect_sram(); - omap_fix_and_map_sram(); - - if (cpu_is_omap242x()) - omap242x_sram_init(); - else if (cpu_is_omap2430()) - omap243x_sram_init(); - else if (soc_is_am33xx()) - am33xx_sram_init(); - else if (cpu_is_omap34xx()) - omap34xx_sram_init(); - - return 0; -} -#endif -- cgit v1.2.3 From c34f7c696211e3d45ff94a34824b65aa52576bc6 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 29 Oct 2012 16:17:59 -0700 Subject: ARM: OMAP: Make plat-omap/i2c.c port checks local The common code should not have any omap1 or omap2+ specific code, and should not need to call the cpu_is_omap macros. The only remaining user for cpu_is_omap macros is omap_i2c_nr_ports(). Let's make those checks in the omap specific implementation of omap_i2c_add_bus() instead in order to remove cpu_is_omap usage from the common code. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/i2c.c | 26 +++----------------------- 1 file changed, 3 insertions(+), 23 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index be6deb7c12ec..d094273b9df5 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -33,9 +33,6 @@ #include -#include "../mach-omap1/soc.h" -#include "../mach-omap2/soc.h" - #include "i2c.h" #define OMAP_I2C_MAX_CONTROLLERS 4 @@ -43,22 +40,6 @@ static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS]; #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) -static int __init omap_i2c_nr_ports(void) -{ - int ports = 0; - - if (cpu_class_is_omap1()) - ports = 1; - else if (cpu_is_omap24xx()) - ports = 2; - else if (cpu_is_omap34xx()) - ports = 3; - else if (cpu_is_omap44xx()) - ports = 4; - - return ports; -} - /** * omap_i2c_bus_setup - Process command line options for the I2C bus speed * @str: String of options @@ -72,12 +53,11 @@ static int __init omap_i2c_nr_ports(void) */ static int __init omap_i2c_bus_setup(char *str) { - int ports; int ints[3]; - ports = omap_i2c_nr_ports(); get_options(str, 3, ints); - if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports) + if (ints[0] < 2 || ints[1] < 1 || + ints[1] > OMAP_I2C_MAX_CONTROLLERS) return 0; i2c_pdata[ints[1] - 1].clkrate = ints[2]; i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP; @@ -122,7 +102,7 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, { int err; - BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports()); + BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS); if (info) { err = i2c_register_board_info(bus_id, info, len); -- cgit v1.2.3 From 01480bad0a91413e92077067e38e82ade78dc88a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 30 Oct 2012 10:33:24 -0700 Subject: ARM: OMAP: Fix relative includes for shared i2c.h file As discussed on linux-arm-kernel, we want to avoid relative includes for the arch/arm/*omap* shared code: http://www.spinics.net/lists/linux-omap/msg80520.html To fix this for the shared i2c.h, let's re-introduce a minimal plat/i2c.h. Note that drivers must not use this header as it will break build for omap2+ CONFIG_MULTIPLATFORM builds. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/i2c.c | 4 +-- arch/arm/plat-omap/i2c.h | 47 ----------------------------------- arch/arm/plat-omap/include/plat/i2c.h | 47 +++++++++++++++++++++++++++++++++++ 3 files changed, 49 insertions(+), 49 deletions(-) delete mode 100644 arch/arm/plat-omap/i2c.h create mode 100644 arch/arm/plat-omap/include/plat/i2c.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index d094273b9df5..4645dd40b886 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -31,9 +31,9 @@ #include #include -#include +#include -#include "i2c.h" +#include #define OMAP_I2C_MAX_CONTROLLERS 4 static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS]; diff --git a/arch/arm/plat-omap/i2c.h b/arch/arm/plat-omap/i2c.h deleted file mode 100644 index 7a9028cb5a75..000000000000 --- a/arch/arm/plat-omap/i2c.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Helper module for board specific I2C bus registration - * - * Copyright (C) 2009 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __PLAT_OMAP_I2C_H -#define __PLAT_OMAP_I2C_H - -struct i2c_board_info; -struct omap_i2c_bus_platform_data; - -int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, - int bus_id); - -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) -extern int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len); -#else -static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len) -{ - return 0; -} -#endif - -struct omap_hwmod; -int omap_i2c_reset(struct omap_hwmod *oh); - -#endif /* __PLAT_OMAP_I2C_H */ diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h new file mode 100644 index 000000000000..7a9028cb5a75 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -0,0 +1,47 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __PLAT_OMAP_I2C_H +#define __PLAT_OMAP_I2C_H + +struct i2c_board_info; +struct omap_i2c_bus_platform_data; + +int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, + int bus_id); + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) +extern int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); +#else +static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + return 0; +} +#endif + +struct omap_hwmod; +int omap_i2c_reset(struct omap_hwmod *oh); + +#endif /* __PLAT_OMAP_I2C_H */ -- cgit v1.2.3 From 6e740f9a85339c295af8deb5376511fcb2a268ad Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 29 Oct 2012 15:20:45 -0700 Subject: ARM: OMAP: Move omap-pm-noop.c local to mach-omap2 This code should be private to mach-omap2. The only use for it in for omap1 has been in dmtimer.c to check for context loss. However, omap1 does not lose context during idle, so the code is not needed. Further, omap1 timer has OMAP_TIMER_ALWON set, so omap1 was not hitting omap_pm_get_dev_context_loss_count() test. Cc: Jon Hunter Cc: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/Makefile | 1 - arch/arm/plat-omap/dmtimer.c | 17 +- arch/arm/plat-omap/include/plat/dmtimer.h | 2 + arch/arm/plat-omap/omap-pm-noop.c | 371 ------------------------------ 4 files changed, 12 insertions(+), 379 deletions(-) delete mode 100644 arch/arm/plat-omap/omap-pm-noop.c (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 4bd0ace20e98..50da9bf5d95c 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -19,4 +19,3 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o -obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 4a0b30a4ebda..9a0bbc455de7 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -45,8 +45,6 @@ #include -#include "../mach-omap2/omap-pm.h" - static u32 omap_reserved_systimers; static LIST_HEAD(omap_timer_list); static DEFINE_SPINLOCK(dm_timer_lock); @@ -349,7 +347,8 @@ int omap_dm_timer_start(struct omap_dm_timer *timer) omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -378,9 +377,11 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) __omap_dm_timer_stop(timer, timer->posted, rate); - if (!(timer->capability & OMAP_TIMER_ALWON)) - timer->ctx_loss_count = - omap_pm_get_dev_context_loss_count(&timer->pdev->dev); + if (!(timer->capability & OMAP_TIMER_ALWON)) { + if (timer->get_context_loss_count) + timer->ctx_loss_count = + timer->get_context_loss_count(&timer->pdev->dev); + } /* * Since the register values are computed and written within @@ -496,7 +497,8 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -730,6 +732,7 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) timer->reserved = omap_dm_timer_reserved_systimer(timer->id); timer->pdev = pdev; timer->capability = pdata->timer_capability; + timer->get_context_loss_count = pdata->get_context_loss_count; /* Skip pm_runtime_enable for OMAP1 */ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 85868e98c11c..3f5b9cfd9c0b 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -94,6 +94,7 @@ struct dmtimer_platform_data { /* set_timer_src - Only used for OMAP1 devices */ int (*set_timer_src)(struct platform_device *pdev, int source); u32 timer_capability; + int (*get_context_loss_count)(struct device *); }; int omap_dm_timer_reserve_systimer(int id); @@ -263,6 +264,7 @@ struct omap_dm_timer { unsigned reserved:1; unsigned posted:1; struct timer_regs context; + int (*get_context_loss_count)(struct device *); int ctx_loss_count; int revision; u32 capability; diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c deleted file mode 100644 index 198685b894b0..000000000000 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ /dev/null @@ -1,371 +0,0 @@ -/* - * omap-pm-noop.c - OMAP power management interface - dummy version - * - * This code implements the OMAP power management interface to - * drivers, CPUIdle, CPUFreq, and DSP Bridge. It is strictly for - * debug/demonstration use, as it does nothing but printk() whenever a - * function is called (when DEBUG is defined, below) - * - * Copyright (C) 2008-2009 Texas Instruments, Inc. - * Copyright (C) 2008-2009 Nokia Corporation - * Paul Walmsley - * - * Interface developed by (in alphabetical order): - * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan - * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff - */ - -#undef DEBUG - -#include -#include -#include -#include - -#include "../mach-omap2/omap_device.h" -#include "../mach-omap2/omap-pm.h" - -static bool off_mode_enabled; -static int dummy_context_loss_counter; - -/* - * Device-driver-originated constraints (via board-*.c files) - */ - -int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) -{ - if (!dev || t < -1) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (t == -1) - pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n", - dev_name(dev), t); - - /* - * For current Linux, this needs to map the MPU to a - * powerdomain, then go through the list of current max lat - * constraints on the MPU and find the smallest. If - * the latency constraint has changed, the code should - * recompute the state to enter for the next powerdomain - * state. - * - * TI CDP code can call constraint_set here. - */ - - return 0; -} - -int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) -{ - if (!dev || (agent_id != OCP_INITIATOR_AGENT && - agent_id != OCP_TARGET_AGENT)) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (r == 0) - pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n", - dev_name(dev), agent_id); - else - pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n", - dev_name(dev), agent_id, r); - - /* - * This code should model the interconnect and compute the - * required clock frequency, convert that to a VDD2 OPP ID, then - * set the VDD2 OPP appropriately. - * - * TI CDP code can call constraint_set here on the VDD2 OPP. - */ - - return 0; -} - -int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, - long t) -{ - if (!req_dev || !dev || t < -1) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (t == -1) - pr_debug("OMAP PM: remove max device latency constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add max device latency constraint: dev %s, t = %ld usec\n", - dev_name(dev), t); - - /* - * For current Linux, this needs to map the device to a - * powerdomain, then go through the list of current max lat - * constraints on that powerdomain and find the smallest. If - * the latency constraint has changed, the code should - * recompute the state to enter for the next powerdomain - * state. Conceivably, this code should also determine - * whether to actually disable the device clocks or not, - * depending on how long it takes to re-enable the clocks. - * - * TI CDP code can call constraint_set here. - */ - - return 0; -} - -int omap_pm_set_max_sdma_lat(struct device *dev, long t) -{ - if (!dev || t < -1) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (t == -1) - pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add max DMA latency constraint: dev %s, t = %ld usec\n", - dev_name(dev), t); - - /* - * For current Linux PM QOS params, this code should scan the - * list of maximum CPU and DMA latencies and select the - * smallest, then set cpu_dma_latency pm_qos_param - * accordingly. - * - * For future Linux PM QOS params, with separate CPU and DMA - * latency params, this code should just set the dma_latency param. - * - * TI CDP code can call constraint_set here. - */ - - return 0; -} - -int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r) -{ - if (!dev || !c || r < 0) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (r == 0) - pr_debug("OMAP PM: remove min clk rate constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add min clk rate constraint: dev %s, rate = %ld Hz\n", - dev_name(dev), r); - - /* - * Code in a real implementation should keep track of these - * constraints on the clock, and determine the highest minimum - * clock rate. It should iterate over each OPP and determine - * whether the OPP will result in a clock rate that would - * satisfy this constraint (and any other PM constraint in effect - * at that time). Once it finds the lowest-voltage OPP that - * meets those conditions, it should switch to it, or return - * an error if the code is not capable of doing so. - */ - - return 0; -} - -/* - * DSP Bridge-specific constraints - */ - -const struct omap_opp *omap_pm_dsp_get_opp_table(void) -{ - pr_debug("OMAP PM: DSP request for OPP table\n"); - - /* - * Return DSP frequency table here: The final item in the - * array should have .rate = .opp_id = 0. - */ - - return NULL; -} - -void omap_pm_dsp_set_min_opp(u8 opp_id) -{ - if (opp_id == 0) { - WARN_ON(1); - return; - } - - pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id); - - /* - * - * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we - * can just test to see which is higher, the CPU's desired OPP - * ID or the DSP's desired OPP ID, and use whichever is - * highest. - * - * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP - * rate is keyed on MPU speed, not the OPP ID. So we need to - * map the OPP ID to the MPU speed for use with clk_set_rate() - * if it is higher than the current OPP clock rate. - * - */ -} - - -u8 omap_pm_dsp_get_opp(void) -{ - pr_debug("OMAP PM: DSP requests current DSP OPP ID\n"); - - /* - * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock - * - * CDP12.14+: - * Call clk_get_rate() on the OPP custom clock, map that to an - * OPP ID using the tables defined in board-*.c/chip-*.c files. - */ - - return 0; -} - -/* - * CPUFreq-originated constraint - * - * In the future, this should be handled by custom OPP clocktype - * functions. - */ - -struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void) -{ - pr_debug("OMAP PM: CPUFreq request for frequency table\n"); - - /* - * Return CPUFreq frequency table here: loop over - * all VDD1 clkrates, pull out the mpu_ck frequencies, build - * table - */ - - return NULL; -} - -void omap_pm_cpu_set_freq(unsigned long f) -{ - if (f == 0) { - WARN_ON(1); - return; - } - - pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n", - f); - - /* - * For l-o dev tree, determine whether MPU freq or DSP OPP id - * freq is higher. Find the OPP ID corresponding to the - * higher frequency. Call clk_round_rate() and clk_set_rate() - * on the OPP custom clock. - * - * CDP should just be able to set the VDD1 OPP clock rate here. - */ -} - -unsigned long omap_pm_cpu_get_freq(void) -{ - pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n"); - - /* - * Call clk_get_rate() on the mpu_ck. - */ - - return 0; -} - -/** - * omap_pm_enable_off_mode - notify OMAP PM that off-mode is enabled - * - * Intended for use only by OMAP PM core code to notify this layer - * that off mode has been enabled. - */ -void omap_pm_enable_off_mode(void) -{ - off_mode_enabled = true; -} - -/** - * omap_pm_disable_off_mode - notify OMAP PM that off-mode is disabled - * - * Intended for use only by OMAP PM core code to notify this layer - * that off mode has been disabled. - */ -void omap_pm_disable_off_mode(void) -{ - off_mode_enabled = false; -} - -/* - * Device context loss tracking - */ - -#ifdef CONFIG_ARCH_OMAP2PLUS - -int omap_pm_get_dev_context_loss_count(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - int count; - - if (WARN_ON(!dev)) - return -ENODEV; - - if (dev->pm_domain == &omap_device_pm_domain) { - count = omap_device_get_context_loss_count(pdev); - } else { - WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device", - dev_name(dev)); - - count = dummy_context_loss_counter; - - if (off_mode_enabled) { - count++; - /* - * Context loss count has to be a non-negative value. - * Clear the sign bit to get a value range from 0 to - * INT_MAX. - */ - count &= INT_MAX; - dummy_context_loss_counter = count; - } - } - - pr_debug("OMAP PM: context loss count for dev %s = %d\n", - dev_name(dev), count); - - return count; -} - -#else - -int omap_pm_get_dev_context_loss_count(struct device *dev) -{ - return dummy_context_loss_counter; -} - -#endif - -/* Should be called before clk framework init */ -int __init omap_pm_if_early_init(void) -{ - return 0; -} - -/* Must be called after clock framework is initialized */ -int __init omap_pm_if_init(void) -{ - return 0; -} - -void omap_pm_if_exit(void) -{ - /* Deallocate CPUFreq frequency table here */ -} - -- cgit v1.2.3 From 5c2e88525b5f1cdc72c9eefba72dae13be7e5d20 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 29 Oct 2012 16:45:47 -0700 Subject: ARM: OMAP: Remove plat-omap/common.h Most of the prototypes in plat-omap/common.h are not common to omap1 and omap2+, they are local to omap2+ and should not be in plat-omap/common.h. The only shared function prototype in this file is omap_init_clocksource_32k(), let's put that into counter-32k.h. Note that the new plat/counter-32k.h must not be included from drivers, that will break omap2+ build for CONFIG_MULTIPLATFORM. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/common.c | 1 - arch/arm/plat-omap/common.h | 36 --------------------------- arch/arm/plat-omap/counter_32k.c | 2 -- arch/arm/plat-omap/include/plat/counter-32k.h | 1 + 4 files changed, 1 insertion(+), 39 deletions(-) delete mode 100644 arch/arm/plat-omap/common.h create mode 100644 arch/arm/plat-omap/include/plat/counter-32k.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index a1555e028123..bf6cd80a30e1 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -16,7 +16,6 @@ #include #include -#include "common.h" #include void __init omap_init_consistent_dma_size(void) diff --git a/arch/arm/plat-omap/common.h b/arch/arm/plat-omap/common.h deleted file mode 100644 index 8ae0542a37d9..000000000000 --- a/arch/arm/plat-omap/common.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Header for shared OMAP code in plat-omap. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H -#define __ARCH_ARM_MACH_OMAP_COMMON_H - -extern int __init omap_init_clocksource_32k(void __iomem *vbase); - -extern void __init omap_check_revision(void); - -extern void omap_reserve(void); -struct omap_hwmod; -extern int omap_dss_reset(struct omap_hwmod *); - -#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 66bf3f9324fe..f3771cdb9838 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -22,8 +22,6 @@ #include #include -#include "common.h" - /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ #define OMAP2_32KSYNCNT_REV_OFF 0x0 #define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) diff --git a/arch/arm/plat-omap/include/plat/counter-32k.h b/arch/arm/plat-omap/include/plat/counter-32k.h new file mode 100644 index 000000000000..da000d482ff2 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/counter-32k.h @@ -0,0 +1 @@ +int omap_init_clocksource_32k(void __iomem *vbase); -- cgit v1.2.3 From 32dee01e67e0d14e86708c4ca6c5a9f4f81d5144 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 30 Oct 2012 10:44:00 -0700 Subject: ARM: OMAP: Fix relative includes for debug-devices.h As discussed on linux-arm-kernel, we want to avoid relative includes for the arch/arm/*omap* shared code: http://www.spinics.net/lists/linux-omap/msg80520.html Let's add plat/debug-devices.h for debug_card_init() to fix the relative includes. Note that drivers must not use this header as it will break build for omap2+ CONFIG_MULTIPLATFORM builds. Cc: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/debug-devices.c | 2 +- arch/arm/plat-omap/include/plat/debug-devices.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) create mode 100644 arch/arm/plat-omap/include/plat/debug-devices.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 5a4678edd65a..b49be51202ee 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -16,7 +16,7 @@ #include #include -#include "../mach-omap2/debug-devices.h" +#include /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h new file mode 100644 index 000000000000..8fc4287222dd --- /dev/null +++ b/arch/arm/plat-omap/include/plat/debug-devices.h @@ -0,0 +1,2 @@ +/* for TI reference platforms sharing the same debug card */ +extern int debug_card_init(u32 addr, unsigned gpio); -- cgit v1.2.3 From 8280960181eae6e4039957044577b6ef7154220f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 30 Oct 2012 11:03:22 -0700 Subject: ARM: OMAP: Remove cpu_is_omap usage from plat-omap/dma.c This code will be eventually in drivers, and for the code in the drivers we don't want to have any cpu_is_omap usage. Those macros should be private to arch/arm/mach-omap1 and arch/arm/mach-omap2. To fix this, let's move the define for dma_omap2plus() to dma-omap.h, and use the existing dma_attr passed in the platform_data as the revision registers are what they are. Note that we can now also remove the relative includes introduced by the recent clean-up patches. Cc: Russell King Cc: Vinod Koul Cc: Lokesh Vutla Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 108 ++++++++++++------------ arch/arm/plat-omap/include/plat-omap/dma-omap.h | 19 ++++- 2 files changed, 67 insertions(+), 60 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 49803cc18787..c288b76f8e6c 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -38,9 +38,6 @@ #include -#include "../mach-omap1/soc.h" -#include "../mach-omap2/soc.h" - /* * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA * channels that an instance of the SDMA IP block can support. Used @@ -182,7 +179,7 @@ void omap_set_dma_priority(int lch, int dst_port, int priority) unsigned long reg; u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { switch (dst_port) { case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ reg = OMAP_TC_OCPT1_PRIOR; @@ -234,7 +231,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, l |= data_type; p->dma_write(l, CSDP, lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 ccr; ccr = p->dma_read(CCR, lch); @@ -250,7 +247,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, p->dma_write(ccr, CCR2, lch); } - if (cpu_class_is_omap2() && dma_trigger) { + if (dma_omap2plus() && dma_trigger) { u32 val; val = p->dma_read(CCR, lch); @@ -290,7 +287,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) { BUG_ON(omap_dma_in_1510_mode()); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CCR2, lch); @@ -320,7 +317,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) p->dma_write(w, LCH_CTRL, lch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 val; val = p->dma_read(CCR, lch); @@ -348,7 +345,7 @@ EXPORT_SYMBOL(omap_set_dma_color_mode); void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) { - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 csdp; csdp = p->dma_read(CSDP, lch); @@ -361,7 +358,7 @@ EXPORT_SYMBOL(omap_set_dma_write_mode); void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode) { - if (cpu_class_is_omap1() && !cpu_is_omap15xx()) { + if (dma_omap1() && !dma_omap15xx()) { u32 l; l = p->dma_read(LCH_CTRL, lch); @@ -379,7 +376,7 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CSDP, lch); @@ -421,7 +418,7 @@ EXPORT_SYMBOL(omap_set_dma_params); void omap_set_dma_src_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CSEI, lch); @@ -453,13 +450,13 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x2; break; } @@ -469,7 +466,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) * fall through */ case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -493,7 +490,7 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { l = p->dma_read(CSDP, lch); l &= ~(0x1f << 9); l |= dest_port << 9; @@ -514,7 +511,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_params); void omap_set_dma_dest_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CDEI, lch); @@ -546,19 +543,19 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x2; else burst = 0x3; break; case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -579,7 +576,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); static inline void omap_enable_channel_irq(int lch) { /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -593,7 +590,7 @@ static inline void omap_disable_channel_irq(int lch) /* disable channel interrupts */ p->dma_write(0, CICR, lch); /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -617,7 +614,7 @@ static inline void enable_lnk(int lch) l = p->dma_read(CLNK_CTRL, lch); - if (cpu_class_is_omap1()) + if (dma_omap1()) l &= ~(1 << 14); /* Set the ENABLE_LNK bits */ @@ -625,7 +622,7 @@ static inline void enable_lnk(int lch) l = dma_chan[lch].next_lch | (1 << 15); #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) + if (dma_omap2plus()) if (dma_chan[lch].next_linked_ch != -1) l = dma_chan[lch].next_linked_ch | (1 << 15); #endif @@ -642,12 +639,12 @@ static inline void disable_lnk(int lch) /* Disable interrupts */ omap_disable_channel_irq(lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* Set the STOP_LNK bit */ l |= 1 << 14; } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { /* Clear the ENABLE_LNK bit */ l &= ~(1 << 15); } @@ -661,7 +658,7 @@ static inline void omap2_enable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -679,7 +676,7 @@ static inline void omap2_disable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -718,7 +715,7 @@ int omap_request_dma(int dev_id, const char *dev_name, if (p->clear_lch_regs) p->clear_lch_regs(free_ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(free_ch); spin_unlock_irqrestore(&dma_chan_lock, flags); @@ -729,7 +726,7 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->flags = 0; #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { chan->chain_id = -1; chan->next_linked_ch = -1; } @@ -737,13 +734,13 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; - if (cpu_class_is_omap1()) + if (dma_omap1()) chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; - else if (cpu_class_is_omap2()) + else if (dma_omap2plus()) chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ | OMAP2_DMA_TRANS_ERR_IRQ; - if (cpu_is_omap16xx()) { + if (dma_omap16xx()) { /* If the sync device is set, configure it dynamically. */ if (dev_id != 0) { set_gdma_dev(free_ch + 1, dev_id); @@ -754,11 +751,11 @@ int omap_request_dma(int dev_id, const char *dev_name, * id. */ p->dma_write(dev_id | (1 << 10), CCR, free_ch); - } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) { + } else if (dma_omap1()) { p->dma_write(dev_id, CCR, free_ch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { omap_enable_channel_irq(free_ch); omap2_enable_irq_lch(free_ch); } @@ -780,7 +777,7 @@ void omap_free_dma(int lch) } /* Disable interrupt for logical channel */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(lch); /* Disable all DMA interrupts for the channel. */ @@ -790,7 +787,7 @@ void omap_free_dma(int lch) p->dma_write(0, CCR, lch); /* Clear registers */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(lch); spin_lock_irqsave(&dma_chan_lock, flags); @@ -816,7 +813,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) { u32 reg; - if (!cpu_class_is_omap2()) { + if (dma_omap1()) { printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__); return; } @@ -855,7 +852,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio, } l = p->dma_read(CCR, lch); l &= ~((1 << 6) | (1 << 26)); - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); else l |= ((read_prio & 0x1) << 6); @@ -888,7 +885,7 @@ void omap_start_dma(int lch) * The CPC/CDAC register needs to be initialized to zero * before starting dma transfer. */ - if (cpu_is_omap15xx()) + if (dma_omap15xx()) p->dma_write(0, CPC, lch); else p->dma_write(0, CDAC, lch); @@ -1051,7 +1048,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CSAC, lch); @@ -1059,7 +1056,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0) offset = p->dma_read(CSAC, lch); - if (!cpu_is_omap15xx()) { + if (!dma_omap15xx()) { /* * CDAC == 0 indicates that the DMA transfer on the channel has * not been started (no data has been transferred so far). @@ -1071,7 +1068,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) offset = p->dma_read(CSSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000); return offset; @@ -1090,7 +1087,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CDAC, lch); @@ -1099,7 +1096,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is * read before the DMA controller finished disabling the channel. */ - if (!cpu_is_omap15xx() && offset == 0) { + if (!dma_omap15xx() && offset == 0) { offset = p->dma_read(CDAC, lch); /* * CDAC == 0 indicates that the DMA transfer on the channel has @@ -1110,7 +1107,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) offset = p->dma_read(CDSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000); return offset; @@ -1127,7 +1124,7 @@ int omap_dma_running(void) { int lch; - if (cpu_class_is_omap1()) + if (dma_omap1()) if (omap_lcd_dma_running()) return 1; @@ -2030,7 +2027,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) dma_chan = d->chan; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * dma_lch_count, GFP_KERNEL); if (!dma_linked_lch) { @@ -2042,7 +2039,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { omap_clear_dma(ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(ch); dma_chan[ch].dev_id = -1; @@ -2051,7 +2048,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) if (ch >= 6 && enable_1510_mode) continue; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* * request_irq() doesn't like dev_id (ie. ch) being * zero, so we have to kludge around this. @@ -2076,11 +2073,11 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, DMA_DEFAULT_FIFO_DEPTH, 0); - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); if (dma_irq < 0) { @@ -2095,9 +2092,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - /* reserve dma channels 0 and 1 in high security devices */ - if (cpu_is_omap34xx() && - (omap_type() != OMAP2_DEVICE_TYPE_GP)) { + /* reserve dma channels 0 and 1 in high security devices on 34xx */ + if (d->dev_caps & HS_CHANNELS_RESERVED) { pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n"); dma_chan[0].dev_id = 0; dma_chan[1].dev_id = 1; @@ -2124,7 +2120,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev) { int dma_irq; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { char irq_name[4]; strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); diff --git a/arch/arm/plat-omap/include/plat-omap/dma-omap.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h index 222be7e934e5..f89886d5fda3 100644 --- a/arch/arm/plat-omap/include/plat-omap/dma-omap.h +++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h @@ -130,10 +130,12 @@ #define SRC_PORT BIT(0x7) #define DST_PORT BIT(0x8) #define SRC_INDEX BIT(0x9) -#define DST_INDEX BIT(0xA) -#define IS_BURST_ONLY4 BIT(0xB) -#define CLEAR_CSR_ON_READ BIT(0xC) -#define IS_WORD_16 BIT(0xD) +#define DST_INDEX BIT(0xa) +#define IS_BURST_ONLY4 BIT(0xb) +#define CLEAR_CSR_ON_READ BIT(0xc) +#define IS_WORD_16 BIT(0xd) +#define ENABLE_16XX_MODE BIT(0xe) +#define HS_CHANNELS_RESERVED BIT(0xf) /* Defines for DMA Capabilities */ #define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18) @@ -270,6 +272,15 @@ struct omap_system_dma_plat_info { u32 (*dma_read)(int reg, int lch); }; +#ifdef CONFIG_ARCH_OMAP2PLUS +#define dma_omap2plus() 1 +#else +#define dma_omap2plus() 0 +#endif +#define dma_omap1() (!dma_omap2plus()) +#define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE))) +#define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE))) + extern void __init omap_init_consistent_dma_size(void); extern void omap_set_dma_priority(int lch, int dst_port, int priority); extern int omap_request_dma(int dev_id, const char *dev_name, -- cgit v1.2.3 From 4e969010c55d72fbdc69333ce59392c7b530f6a3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 30 Oct 2012 15:30:44 -0700 Subject: ARM: OMAP1: Remove relative includes As discussed on linux-arm-kernel, we want to avoid relative includes for the arch/arm/*omap* code: http://www.spinics.net/lists/linux-omap/msg80520.html Note that eventually when the omap1 specific drivers are fixed to not use cpu_is_omap macros and not depend on mach/hardware.h, this patch can be reverted and these headers can be local. But since just fixing the drivers for omap2+ is already a big enough hassle, let's deal with that properly first. [tony@atomide.com: also drop unused include for ispvideo.c] Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index ba542ec8d513..b4516aba67ed 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -29,7 +29,7 @@ #define __ASM_ARCH_OMAP_CPU_H #ifdef CONFIG_ARCH_OMAP1 -#include "../../mach-omap1/soc.h" +#include #endif #ifdef CONFIG_ARCH_OMAP2PLUS -- cgit v1.2.3 From 21d182bd10ad16e904f3e4ba0ed51f00a19c0dda Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 31 Oct 2012 14:02:46 -0700 Subject: ARM: OMAP: Fix relative includes for fpga.h As discussed on linux-arm-kernel, we want to avoid relative includes for the arch/arm/*omap* code: http://www.spinics.net/lists/linux-omap/msg80520.html Fix includes for fpga.h by making fpga.h local to mach-omap1. The common code in plat-omap just needs to know the struct h2p2_dbg_fpga, which can be local to debug-leds.c. This also fixes the braindead <../*.h> style includes that got accidentally added with search and replace during the cleanup. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/debug-leds.c | 23 +++++++++++-- arch/arm/plat-omap/fpga.h | 74 ----------------------------------------- 2 files changed, 20 insertions(+), 77 deletions(-) delete mode 100644 arch/arm/plat-omap/fpga.h (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index feca128bc8ed..c43ea21f33b4 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -17,16 +17,33 @@ #include #include -#include #include -#include "fpga.h" - /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the * debug board (all green), accessed through FPGA registers. */ +/* NOTE: most boards don't have a static mapping for the FPGA ... */ +struct h2p2_dbg_fpga { + /* offset 0x00 */ + u16 smc91x[8]; + /* offset 0x10 */ + u16 fpga_rev; + u16 board_rev; + u16 gpio_outputs; + u16 leds; + /* offset 0x18 */ + u16 misc_inputs; + u16 lan_status; + u16 lan_reset; + u16 reserved0; + /* offset 0x20 */ + u16 ps2_data; + u16 ps2_ctrl; + /* plus also 4 rs232 ports ... */ +}; + static struct h2p2_dbg_fpga __iomem *fpga; static u16 fpga_led_state; diff --git a/arch/arm/plat-omap/fpga.h b/arch/arm/plat-omap/fpga.h deleted file mode 100644 index 54faaa93e6f4..000000000000 --- a/arch/arm/plat-omap/fpga.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/fpga.h - * - * Interrupt handler for OMAP-1510 FPGA - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_FPGA_H -#define __ASM_ARCH_OMAP_FPGA_H - -/* - * --------------------------------------------------------------------------- - * H2/P2 Debug board FPGA - * --------------------------------------------------------------------------- - */ -/* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ - -#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) -#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ -#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ -#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ -#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ -#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ -#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ -#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ - -/* NOTE: most boards don't have a static mapping for the FPGA ... */ -struct h2p2_dbg_fpga { - /* offset 0x00 */ - u16 smc91x[8]; - /* offset 0x10 */ - u16 fpga_rev; - u16 board_rev; - u16 gpio_outputs; - u16 leds; - /* offset 0x18 */ - u16 misc_inputs; - u16 lan_status; - u16 lan_reset; - u16 reserved0; - /* offset 0x20 */ - u16 ps2_data; - u16 ps2_ctrl; - /* plus also 4 rs232 ports ... */ -}; - -/* LEDs definition on debug board (16 LEDs, all physically green) */ -#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) -#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) -#define H2P2_DBG_FPGA_LED_RED (1 << 13) -#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) -/* cpu0 load-meter LEDs */ -#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... -#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 -#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) - -#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) -#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) - -#endif -- cgit v1.2.3 From 7136f8d88c08f18158b63777fb270b62788ed169 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 31 Oct 2012 12:38:43 -0700 Subject: ARM: OMAP: Remove unnecessary mach and plat includes Now mach/hardware.h is empty for omap2+ and can be removed except for plat-omap/dmtimer.c for omap1. Also the include of mach/irqs.h can now be removed for shared plat-omap/i2c.c as it's no longer needed. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/debug-devices.c | 1 - arch/arm/plat-omap/dmtimer.c | 4 +--- arch/arm/plat-omap/fb.c | 1 - arch/arm/plat-omap/i2c.c | 2 -- 4 files changed, 1 insertion(+), 7 deletions(-) (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index b49be51202ee..a609e2161817 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -15,7 +15,6 @@ #include #include -#include #include /* Many OMAP development platforms reuse the same "debug board"; these diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 9a0bbc455de7..82231a75abd6 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -43,8 +43,6 @@ #include -#include - static u32 omap_reserved_systimers; static LIST_HEAD(omap_timer_list); static DEFINE_SPINLOCK(dm_timer_lock); @@ -270,7 +268,7 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer) EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq); #if defined(CONFIG_ARCH_OMAP1) - +#include /** * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR * @inputmask: current value of idlect mask diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index f868caeedfd6..3a77b30f53d4 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -30,7 +30,6 @@ #include #include -#include #include #include diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 4645dd40b886..f9df624d108c 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -33,8 +33,6 @@ #include -#include - #define OMAP_I2C_MAX_CONTROLLERS 4 static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS]; -- cgit v1.2.3 From 6ba54ab4a49bbad736b0254aa6bdf0cb83013815 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 2 Nov 2012 10:36:13 +0200 Subject: ARM: OMAP: Remove omap_init_consistent_dma_size() The only thing omap_init_consistent_dma_size() does is increase the consistent DMA size if CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE is defined. Increasing the consistent DMA size should no longer be needed with CMA in place. This patch removes omap_init_consistent_dma_size() and also arch/arm/mach-omap2/io.c:omap_common_init_early() which becomes an empty function. Signed-off-by: Tomi Valkeinen Acked-by: Santosh Shilimkar [tony@atomide.com: updated for moved dma.h] Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/Makefile | 2 +- arch/arm/plat-omap/common.c | 26 ------------------------- arch/arm/plat-omap/include/plat-omap/dma-omap.h | 1 - 3 files changed, 1 insertion(+), 28 deletions(-) delete mode 100644 arch/arm/plat-omap/common.c (limited to 'arch/arm/plat-omap') diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 50da9bf5d95c..8d885848600a 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o sram.o dma.o fb.o counter_32k.o +obj-y := sram.o dma.o fb.o counter_32k.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c deleted file mode 100644 index bf6cd80a30e1..000000000000 --- a/arch/arm/plat-omap/common.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/arch/arm/plat-omap/common.c - * - * Code common to all OMAP machines. - * The file is created by Tony Lindgren - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include - -#include - -void __init omap_init_consistent_dma_size(void) -{ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); -#endif -} diff --git a/arch/arm/plat-omap/include/plat-omap/dma-omap.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h index f89886d5fda3..6f506ba9e453 100644 --- a/arch/arm/plat-omap/include/plat-omap/dma-omap.h +++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h @@ -281,7 +281,6 @@ struct omap_system_dma_plat_info { #define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE))) #define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE))) -extern void __init omap_init_consistent_dma_size(void); extern void omap_set_dma_priority(int lch, int dst_port, int priority); extern int omap_request_dma(int dev_id, const char *dev_name, void (*callback)(int lch, u16 ch_status, void *data), -- cgit v1.2.3