From fdc0074c5fc8c7adb8186cbb123fe2082d9bd05f Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 9 Feb 2015 18:23:20 +0800 Subject: ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage As the sunxi usb clocks all contain a reset controller, it is not possible to build the sunxi clock driver without RESET_CONTROLLER enabled. Doing so results in an undefined symbol error: drivers/built-in.o: In function `sunxi_gates_clk_setup': linux/drivers/clk/sunxi/clk-sunxi.c:1071: undefined reference to `reset_controller_register' This is possible if building a minimal kernel without PHY_SUN4I_USB. The dependency issue is made visible at compile time instead of link time by the new A80 mmc clocks, which also use a reset control itself. This patch makes ARCH_SUNXI select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER. Fixes: 559482d1f950 ARM: sunxi: Split the various SoCs support in Kconfig Cc: # 3.16+ Reported-by: Lourens Rozema Acked-by: Arnd Bergmann Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/mach-sunxi/Kconfig | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index a77604fbaf25..81502b90dd91 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,10 +1,12 @@ menuconfig ARCH_SUNXI bool "Allwinner SoCs" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_RESET_CONTROLLER select CLKSRC_MMIO select GENERIC_IRQ_CHIP select PINCTRL select SUN4I_TIMER + select RESET_CONTROLLER if ARCH_SUNXI @@ -20,10 +22,8 @@ config MACH_SUN5I config MACH_SUN6I bool "Allwinner A31 (sun6i) SoCs support" default ARCH_SUNXI - select ARCH_HAS_RESET_CONTROLLER select ARM_GIC select MFD_SUN6I_PRCM - select RESET_CONTROLLER select SUN5I_HSTIMER config MACH_SUN7I @@ -37,16 +37,12 @@ config MACH_SUN7I config MACH_SUN8I bool "Allwinner A23 (sun8i) SoCs support" default ARCH_SUNXI - select ARCH_HAS_RESET_CONTROLLER select ARM_GIC select MFD_SUN6I_PRCM - select RESET_CONTROLLER config MACH_SUN9I bool "Allwinner (sun9i) SoCs support" default ARCH_SUNXI - select ARCH_HAS_RESET_CONTROLLER select ARM_GIC - select RESET_CONTROLLER endif -- cgit v1.2.3 From 5c0c75d33d45a8dc7a2af815834812d41f5361e8 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Sat, 31 Jan 2015 14:49:38 +0900 Subject: ARM: pxa: Fix typo in zeus.c This patch fix a typo in struct platform_device can_regulator_device. Signed-off-by: Masanari Iida Acked-by: Daniel Mack Signed-off-by: Robert Jarzmik --- arch/arm/mach-pxa/zeus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 205f9bf3821e..ac2ae5c71ab4 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -412,7 +412,7 @@ static struct fixed_voltage_config can_regulator_pdata = { }; static struct platform_device can_regulator_device = { - .name = "reg-fixed-volage", + .name = "reg-fixed-voltage", .id = 0, .dev = { .platform_data = &can_regulator_pdata, -- cgit v1.2.3 From d6cf30ca716b347587b35923eda400ad2d9e8832 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sat, 14 Feb 2015 22:41:56 +0100 Subject: ARM: pxa: fix pxa interrupts handling in DT The commit "ARM: pxa: arbitrarily set first interrupt number" changed the first pxa interrupt to 16. As a consequence, device-tree builds got broken, because : - pxa_mask_irq() and pxa_unmask_irq() are using IRQ_BIT() - IRQ_BIT(x) calculates the interrupts as : x - PXA_IRQ(0) Before the commit, the first interrupt shift, PXA_IRQ(0) was 0, therefore IRQ_BIT(x) was x. After the change, it is necessary that the same shift of 16 is applied between the virtual interrupt number and the hardware irq number. This situation comes from the common irq_chip shared between legacy platform builds and device-tree builds. Fix the broken interrupts in DT case by adding this shift in the DT case too. As a consequence of the IRQ_BIT() is removed alltogether from interrupts handling, even in the platform data types of platforms : - a legacy irq domain is used - the irq_chip handles hardware interrupts - the virtual to hardware interrupt conversion is fully handled by irq domain mechanics Signed-off-by: Robert Jarzmik --- arch/arm/Kconfig | 1 + arch/arm/mach-pxa/irq.c | 111 +++++++++++++++++++++--------------------------- 2 files changed, 49 insertions(+), 63 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9f1f09a2bc9b..cf4c0c99aa25 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -619,6 +619,7 @@ config ARCH_PXA select GENERIC_CLOCKEVENTS select GPIO_PXA select HAVE_IDE + select IRQ_DOMAIN select MULTI_IRQ_HANDLER select PLAT_PXA select SPARSE_IRQ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 0eecd83c624e..89a7c06570d3 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include #include #include #include @@ -40,7 +41,6 @@ #define ICHP_VAL_IRQ (1 << 31) #define ICHP_IRQ(i) (((i) >> 16) & 0x7fff) #define IPR_VALID (1 << 31) -#define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f) #define MAX_INTERNAL_IRQS 128 @@ -51,6 +51,7 @@ static void __iomem *pxa_irq_base; static int pxa_internal_irq_nr; static bool cpu_has_ipr; +static struct irq_domain *pxa_irq_domain; static inline void __iomem *irq_base(int i) { @@ -66,18 +67,20 @@ static inline void __iomem *irq_base(int i) void pxa_mask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); + irq_hw_number_t irq = irqd_to_hwirq(d); uint32_t icmr = __raw_readl(base + ICMR); - icmr &= ~(1 << IRQ_BIT(d->irq)); + icmr &= ~BIT(irq & 0x1f); __raw_writel(icmr, base + ICMR); } void pxa_unmask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); + irq_hw_number_t irq = irqd_to_hwirq(d); uint32_t icmr = __raw_readl(base + ICMR); - icmr |= 1 << IRQ_BIT(d->irq); + icmr |= BIT(irq & 0x1f); __raw_writel(icmr, base + ICMR); } @@ -118,40 +121,63 @@ asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs) } while (1); } -void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int)) +static int pxa_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) { - int irq, i, n; + void __iomem *base = irq_base(hw / 32); - BUG_ON(irq_nr > MAX_INTERNAL_IRQS); + /* initialize interrupt priority */ + if (cpu_has_ipr) + __raw_writel(hw | IPR_VALID, pxa_irq_base + IPR(hw)); + + irq_set_chip_and_handler(virq, &pxa_internal_irq_chip, + handle_level_irq); + irq_set_chip_data(virq, base); + set_irq_flags(virq, IRQF_VALID); + + return 0; +} + +static struct irq_domain_ops pxa_irq_ops = { + .map = pxa_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +static __init void +pxa_init_irq_common(struct device_node *node, int irq_nr, + int (*fn)(struct irq_data *, unsigned int)) +{ + int n; pxa_internal_irq_nr = irq_nr; - cpu_has_ipr = !cpu_is_pxa25x(); - pxa_irq_base = io_p2v(0x40d00000); + pxa_irq_domain = irq_domain_add_legacy(node, irq_nr, + PXA_IRQ(0), 0, + &pxa_irq_ops, NULL); + if (!pxa_irq_domain) + panic("Unable to add PXA IRQ domain\n"); + irq_set_default_host(pxa_irq_domain); for (n = 0; n < irq_nr; n += 32) { void __iomem *base = irq_base(n >> 5); __raw_writel(0, base + ICMR); /* disable all IRQs */ __raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */ - for (i = n; (i < (n + 32)) && (i < irq_nr); i++) { - /* initialize interrupt priority */ - if (cpu_has_ipr) - __raw_writel(i | IPR_VALID, pxa_irq_base + IPR(i)); - - irq = PXA_IRQ(i); - irq_set_chip_and_handler(irq, &pxa_internal_irq_chip, - handle_level_irq); - irq_set_chip_data(irq, base); - set_irq_flags(irq, IRQF_VALID); - } } - /* only unmasked interrupts kick us out of idle */ __raw_writel(1, irq_base(0) + ICCR); pxa_internal_irq_chip.irq_set_wake = fn; } +void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int)) +{ + BUG_ON(irq_nr > MAX_INTERNAL_IRQS); + + pxa_irq_base = io_p2v(0x40d00000); + cpu_has_ipr = !cpu_is_pxa25x(); + pxa_init_irq_common(NULL, irq_nr, fn); +} + #ifdef CONFIG_PM static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32]; static unsigned long saved_ipr[MAX_INTERNAL_IRQS]; @@ -203,30 +229,6 @@ struct syscore_ops pxa_irq_syscore_ops = { }; #ifdef CONFIG_OF -static struct irq_domain *pxa_irq_domain; - -static int pxa_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - void __iomem *base = irq_base(hw / 32); - - /* initialize interrupt priority */ - if (cpu_has_ipr) - __raw_writel(hw | IPR_VALID, pxa_irq_base + IPR(hw)); - - irq_set_chip_and_handler(hw, &pxa_internal_irq_chip, - handle_level_irq); - irq_set_chip_data(hw, base); - set_irq_flags(hw, IRQF_VALID); - - return 0; -} - -static struct irq_domain_ops pxa_irq_ops = { - .map = pxa_irq_map, - .xlate = irq_domain_xlate_onecell, -}; - static const struct of_device_id intc_ids[] __initconst = { { .compatible = "marvell,pxa-intc", }, {} @@ -236,7 +238,7 @@ void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)) { struct device_node *node; struct resource res; - int n, ret; + int ret; node = of_find_matching_node(NULL, intc_ids); if (!node) { @@ -267,23 +269,6 @@ void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)) return; } - pxa_irq_domain = irq_domain_add_legacy(node, pxa_internal_irq_nr, 0, 0, - &pxa_irq_ops, NULL); - if (!pxa_irq_domain) - panic("Unable to add PXA IRQ domain\n"); - - irq_set_default_host(pxa_irq_domain); - - for (n = 0; n < pxa_internal_irq_nr; n += 32) { - void __iomem *base = irq_base(n >> 5); - - __raw_writel(0, base + ICMR); /* disable all IRQs */ - __raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */ - } - - /* only unmasked interrupts kick us out of idle */ - __raw_writel(1, irq_base(0) + ICCR); - - pxa_internal_irq_chip.irq_set_wake = fn; + pxa_init_irq_common(node, pxa_internal_irq_nr, fn); } #endif /* CONFIG_OF */ -- cgit v1.2.3 From 54b0bc602541fcc2dd9f2480623c00552e0b220e Mon Sep 17 00:00:00 2001 From: Alexandru M Stan Date: Fri, 13 Mar 2015 17:55:32 -0700 Subject: ARM: dts: rockchip: disable gmac by default in rk3288.dtsi This block should not be enabled by default or else if the kconfig is set, it will try to load/probe even if there's no phy connected. Signed-off-by: Alexandru M Stan Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index d771f687a13b..eccc78d3220b 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -411,6 +411,7 @@ "mac_clk_rx", "mac_clk_tx", "clk_mac_ref", "clk_mac_refout", "aclk_mac", "pclk_mac"; + status = "disabled"; }; usb_host0_ehci: usb@ff500000 { -- cgit v1.2.3 From d6e5b7cc9819f9a108294f256dd80939e91a0a1f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Thu, 26 Feb 2015 14:49:56 +0100 Subject: ARM: dts: omap3: Add missing dmas for crypto MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds missing dma DTS definitions for omap aes and sham drivers. Without it kernel drivers do not work for device tree based booting while it works for legacy booting on general purpose SoCs. Note that further changes are still needed for high secure SoCs. But since that never worked in legacy boot mode either, those will be sent separately. Signed-off-by: Pali Rohár Acked-by: Pavel Machek [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f4f78c40b564..3fdc84fddb70 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -92,6 +92,8 @@ ti,hwmods = "aes"; reg = <0x480c5000 0x50>; interrupts = <0>; + dmas = <&sdma 65 &sdma 66>; + dma-names = "tx", "rx"; }; prm: prm@48306000 { @@ -550,6 +552,8 @@ ti,hwmods = "sham"; reg = <0x480c3000 0x64>; interrupts = <49>; + dmas = <&sdma 69>; + dma-names = "rx"; }; smartreflex_core: smartreflex@480cb000 { -- cgit v1.2.3 From e5ed5b60272871786b1c5434079925bc60d771b7 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Wed, 11 Mar 2015 18:38:38 -0500 Subject: ARM: OMAP2+: Fix socbus family info for AM33xx devices The family information in the soc-bus data is currently not classified properly for AM33xx devices, and a read of /sys/bus/soc/devices/soc0/family currently shows "Unknown". Fix the same. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 2a2f4d56e4c8..25f1beea453e 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -720,6 +720,8 @@ static const char * __init omap_get_family(void) return kasprintf(GFP_KERNEL, "OMAP4"); else if (soc_is_omap54xx()) return kasprintf(GFP_KERNEL, "OMAP5"); + else if (soc_is_am33xx() || soc_is_am335x()) + return kasprintf(GFP_KERNEL, "AM33xx"); else if (soc_is_am43xx()) return kasprintf(GFP_KERNEL, "AM43xx"); else if (soc_is_dra7xx()) -- cgit v1.2.3 From a76fc9dda87b51010e4bc60b5e0065a70180b465 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Mon, 16 Mar 2015 20:14:02 -0500 Subject: ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure The current OMAP dmtimer probe does not check for the return status of pm_runtime_get_sync() before initializing the timer registers. Any timer with missing hwmod data would return a failure here, and the access of registers without enabling the clocks for the timer would trigger a l3_noc interrupt and a kernel boot hang. Add proper checking so that the probe would return a failure graciously without hanging the kernel boot. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index db10169a08de..f32c74c0e1de 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -799,6 +799,7 @@ static int omap_dm_timer_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; const struct of_device_id *match; const struct dmtimer_platform_data *pdata; + int ret; match = of_match_device(of_match_ptr(omap_timer_match), dev); pdata = match ? match->data : dev->platform_data; @@ -860,7 +861,12 @@ static int omap_dm_timer_probe(struct platform_device *pdev) } if (!timer->reserved) { - pm_runtime_get_sync(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + dev_err(dev, "%s: pm_runtime_get_sync failed!\n", + __func__); + goto err_get_sync; + } __omap_dm_timer_init_regs(timer); pm_runtime_put(dev); } @@ -873,6 +879,11 @@ static int omap_dm_timer_probe(struct platform_device *pdev) dev_dbg(dev, "Device Probed.\n"); return 0; + +err_get_sync: + pm_runtime_put_noidle(dev); + pm_runtime_disable(dev); + return ret; } /** -- cgit v1.2.3 From 51b7e5728ebcded3f2ced9cd3ff71076c91e85de Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Mon, 16 Mar 2015 20:14:03 -0500 Subject: ARM: OMAP: dmtimer: disable pm runtime on remove Disable the pm_runtime of the device upon remove. This is added to balance the pm_runtime_enable() invoked in the probe. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index f32c74c0e1de..8ca94d379bc3 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -910,6 +910,8 @@ static int omap_dm_timer_remove(struct platform_device *pdev) } spin_unlock_irqrestore(&dm_timer_lock, flags); + pm_runtime_disable(&pdev->dev); + return ret; } -- cgit v1.2.3 From 077155332265f1d64c57bd6c49748a8b7e72a3f9 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Fri, 20 Feb 2015 14:21:14 +0530 Subject: ARM: dts: dra7: remove ti,hwmod property from pcie phy Now that we don't have hwmod entry for pcie PHY remove the ti,hwmod property from PCIE PHY's. Otherwise we will get: platform 4a094000.pciephy: Cannot lookup hwmod 'pcie1-phy' Signed-off-by: Kishon Vijay Abraham I [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 127608d79033..c4659a979c41 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1111,7 +1111,6 @@ "wkupclk", "refclk", "div-clk", "phy-div"; #phy-cells = <0>; - ti,hwmods = "pcie1-phy"; }; pcie2_phy: pciephy@4a095000 { @@ -1130,7 +1129,6 @@ "wkupclk", "refclk", "div-clk", "phy-div"; #phy-cells = <0>; - ti,hwmods = "pcie2-phy"; status = "disabled"; }; }; -- cgit v1.2.3 From 599c376c49323127c9bdbb0fa61a3d4743819bc2 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 18 Mar 2015 13:41:34 -0700 Subject: ARM: dts: Fix gpio interrupts for dm816x Commit 7800064ba507 ("ARM: dts: Add basic dm816x device tree configuration") added basic devices for dm816x, but I was not able to test the GPIO interrupts earlier until I found some suitable pins to test with. We can mux the MMC card detect and write protect pins from SD_SDCD and SD_SDWP mode to use a normal GPIO interrupts that are also suitable for the MMC subsystem. This turned out several issues that need to be fixed: - I set the GPIO type wrong to be compatible with omap3 instead of omap4. The GPIO controller on dm816x has EOI interrupt register like omap4 and am335x. - I got the GPIO interrupt numbers wrong as each bank has two and we only use one. They need to be set up the same way as on am335x. - The gpio banks are missing interrupt controller related properties. With these changes the GPIO interrupts can be used with the MMC card detect pin, so let's wire that up. Let's also mux all the MMC lines for completeness while at it. For the first GPIO bank I tested using GPMC lines temporarily muxed to GPIOs on the dip switch 10. Cc: Brian Hutchinson Cc: Matthijs van Duin Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dm8168-evm.dts | 19 +++++++++++++++++++ arch/arm/boot/dts/dm816x.dtsi | 18 ++++++++++++++---- 2 files changed, 33 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index d3a29c1b8417..afe678f6d2e9 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -36,6 +36,20 @@ >; }; + mmc_pins: pinmux_mmc_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */ + DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */ + DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */ + DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */ + DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */ + DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */ + DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */ + DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */ + DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */ + >; + }; + usb0_pins: pinmux_usb0_pins { pinctrl-single,pins = < DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */ @@ -137,7 +151,12 @@ }; &mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; }; /* At least dm8168-evm rev c won't support multipoint, later may */ diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 3c97b5f2addc..f35715bc6992 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -150,17 +150,27 @@ }; gpio1: gpio@48032000 { - compatible = "ti,omap3-gpio"; + compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; + ti,gpio-always-on; reg = <0x48032000 0x1000>; - interrupts = <97>; + interrupts = <96>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; gpio2: gpio@4804c000 { - compatible = "ti,omap3-gpio"; + compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; + ti,gpio-always-on; reg = <0x4804c000 0x1000>; - interrupts = <99>; + interrupts = <98>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; gpmc: gpmc@50000000 { -- cgit v1.2.3 From 1ac31de744202a3a14601170a57f155b4a8d2c21 Mon Sep 17 00:00:00 2001 From: Mark James Date: Tue, 17 Mar 2015 21:35:23 +0000 Subject: ARM: socfpga: dts: fix spi1 interrupt The socfpga.dtsi currently has the wrong interrupt number set for SPI master 1 Trying to use the master without this change results in the kernel boot process waiting forever for an interrupt that will never occur while attempting to probe any slave devices configured in the device tree as being under SPI master 1. The change works for the Cyclone V, and according to the Arria 5 handbook should be good there too. Signed-off-by: Mark James Acked-by: Steffen Trumtrar Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 9d8760956752..d9176e606173 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -660,7 +660,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xfff01000 0x1000>; - interrupts = <0 156 4>; + interrupts = <0 155 4>; num-cs = <4>; clocks = <&spi_m_clk>; status = "disabled"; -- cgit v1.2.3 From 977104e5606a6df8fe22c0dacd3620fc00b58d61 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 25 Mar 2015 00:53:26 +0800 Subject: ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting The Olimex A10-Lime is known to be unstable when running at 1008MHz. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index ab7891c43231..75742f8f96f3 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -56,6 +56,22 @@ model = "Olimex A10-OLinuXino-LIME"; compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; + cpus { + cpu0: cpu@0 { + /* + * The A10-Lime is known to be unstable + * when running at 1008 MHz + */ + operating-points = < + /* kHz uV */ + 912000 1350000 + 864000 1300000 + 624000 1250000 + >; + cooling-max-level = <2>; + }; + }; + soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; -- cgit v1.2.3 From 370a9b5fb04a0d5cc7b7699c788616d6976f4476 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 25 Mar 2015 00:53:27 +0800 Subject: ARM: dts: sunxi: Remove overclocked/overvoltaged OPP Without proper regulator support for individual boards, it is dangerous to have overclocked/overvoltaged OPPs in the list. Cpufreq will increase the frequency without the accompanying voltage increase, resulting in an unstable system. Remove them for now. We can revisit them with the new version of OPP bindings, which support boost settings and frequency ranges, among other things. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10.dtsi | 3 +-- arch/arm/boot/dts/sun5i-a13.dtsi | 3 +-- arch/arm/boot/dts/sun7i-a20.dtsi | 3 +-- 3 files changed, 3 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 5c2925831f20..eebb7853e00b 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -75,7 +75,6 @@ clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ - 1056000 1500000 1008000 1400000 912000 1350000 864000 1300000 @@ -83,7 +82,7 @@ >; #cooling-cells = <2>; cooling-min-level = <0>; - cooling-max-level = <4>; + cooling-max-level = <3>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index f8818f1edbbe..883cb4873688 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -47,7 +47,6 @@ clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ - 1104000 1500000 1008000 1400000 912000 1350000 864000 1300000 @@ -57,7 +56,7 @@ >; #cooling-cells = <2>; cooling-min-level = <0>; - cooling-max-level = <6>; + cooling-max-level = <5>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 3a8530b79f1c..fdd181792b4b 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -105,7 +105,6 @@ clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ - 1008000 1450000 960000 1400000 912000 1400000 864000 1300000 @@ -116,7 +115,7 @@ >; #cooling-cells = <2>; cooling-min-level = <0>; - cooling-max-level = <7>; + cooling-max-level = <6>; }; cpu@1 { -- cgit v1.2.3