From a82279dd6d3e500fea457f1cfea46a6b7ecd7e1f Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Thu, 24 Jan 2013 03:45:12 +0000 Subject: arm: am33xx: add TSC/ADC mfd device support Add support for core multifunctional device along with its clients touchscreen and ADC. Signed-off-by: Pantelis Antoniou Signed-off-by: Patil, Rachna Signed-off-by: Felipe Balbi Signed-off-by: Sebastian Andrzej Siewior --- arch/arm/boot/dts/am335x-evm.dts | 14 ++++++++++++++ arch/arm/boot/dts/am33xx.dtsi | 18 ++++++++++++++++++ 2 files changed, 32 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 0423298a26fe..26fea97dd6e0 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -244,3 +244,17 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordiante-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <4>; + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 1460d9b88adf..4ad7797b97b6 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -404,6 +404,24 @@ ti,hwmods = "wkup_m3"; }; + tscadc: tscadc@44e0d000 { + compatible = "ti,am3359-tscadc"; + reg = <0x44e0d000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <16>; + ti,hwmods = "adc_tsc"; + status = "disabled"; + + tsc { + compatible = "ti,am3359-tsc"; + }; + am335x_adc: adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + + }; + gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; -- cgit v1.2.3 From 18926edebcb82ca325abf843293801d4ff43436a Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 29 May 2013 17:39:02 +0200 Subject: iio: ti_am335x_adc: Allow to specify input line The TSC part allows to specify the input lines. The IIO part assumes that it usues always the last few, that means if IIO has adc-channels set to 2 it will use channel 6 and 7. However it might make sense to use only 6. This patch changes the device property (which was introduced recently and was never in an official release) in a way that the user can specify which of the AIN lines should be used. In Addition to this, the name is now AINx where x is the channel number i.e. for AIN6 we would have 6. Prior this, it always started counting at 0 which is confusing. In addition to this, it also checks for correct step number during reading and does not rely on proper FIFO depth. Acked-by: Jonathan Cameron Signed-off-by: Sebastian Andrzej Siewior --- arch/arm/boot/dts/am335x-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 26fea97dd6e0..0fa4c7f9539f 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -255,6 +255,6 @@ }; adc { - ti,adc-channels = <4>; + ti,adc-channels = <4 5 6 7>; }; }; -- cgit v1.2.3 From 4280e0b42bd590316a048d66ea356e78c5d0464e Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Mon, 24 Jun 2013 14:39:53 +0200 Subject: regulator: max8998: Use arrays for specifying voltages in platform data This patch modifies the platform data of max8998 to use arrays for specifying predefined voltages of buck1 and buck2 instead of separate field for each voltage. This allows to simplify the code a bit and will help in adding support for Device Tree, which will be introduced in further patch. Signed-off-by: Tomasz Figa Acked-by: Mark Brown Signed-off-by: Samuel Ortiz --- arch/arm/mach-exynos/mach-universal_c210.c | 8 ++------ arch/arm/mach-s5pv210/mach-aquila.c | 8 ++------ arch/arm/mach-s5pv210/mach-goni.c | 8 ++------ 3 files changed, 6 insertions(+), 18 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 74ddb2b55614..f912444cae33 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -540,15 +540,11 @@ static struct max8998_regulator_data lp3974_regulators[] = { static struct max8998_platform_data universal_lp3974_pdata = { .num_regulators = ARRAY_SIZE(lp3974_regulators), .regulators = lp3974_regulators, - .buck1_voltage1 = 1100000, /* INT */ - .buck1_voltage2 = 1000000, - .buck1_voltage3 = 1100000, - .buck1_voltage4 = 1000000, + .buck1_voltage = { 1100000, 1000000, 1100000, 1000000 }, .buck1_set1 = EXYNOS4_GPX0(5), .buck1_set2 = EXYNOS4_GPX0(6), - .buck2_voltage1 = 1200000, /* G3D */ - .buck2_voltage2 = 1100000, .buck1_default_idx = 0, + .buck2_voltage = { 1200000, 1100000 }, .buck2_set3 = EXYNOS4_GPE2(0), .buck2_default_idx = 0, .wakeup = true, diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index ed2b85485b9d..ad40ab0f5dbd 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -377,12 +377,8 @@ static struct max8998_platform_data aquila_max8998_pdata = { .buck1_set1 = S5PV210_GPH0(3), .buck1_set2 = S5PV210_GPH0(4), .buck2_set3 = S5PV210_GPH0(5), - .buck1_voltage1 = 1200000, - .buck1_voltage2 = 1200000, - .buck1_voltage3 = 1200000, - .buck1_voltage4 = 1200000, - .buck2_voltage1 = 1200000, - .buck2_voltage2 = 1200000, + .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 }, + .buck2_voltage = { 1200000, 1200000 }, }; #endif diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 30b24ad84f49..e5cd9fbf19e9 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -580,12 +580,8 @@ static struct max8998_platform_data goni_max8998_pdata = { .buck1_set1 = S5PV210_GPH0(3), .buck1_set2 = S5PV210_GPH0(4), .buck2_set3 = S5PV210_GPH0(5), - .buck1_voltage1 = 1200000, - .buck1_voltage2 = 1200000, - .buck1_voltage3 = 1200000, - .buck1_voltage4 = 1200000, - .buck2_voltage1 = 1200000, - .buck2_voltage2 = 1200000, + .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 }, + .buck2_voltage = { 1200000, 1200000 }, }; #endif -- cgit v1.2.3