From 98bbc114bfa0ea1da31e230050b437e19e49e2b3 Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Sun, 15 Jun 2014 16:02:17 -0600 Subject: ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX am43xx reset register layout is more similar to am33xx than omap4 so use the am33xx functions for hwmod hardreset soc_ops rather than the currently used omap4 functions. Without this, assert_hardreset and deassert_hardreset will not work on am43xx. Signed-off-by: Dave Gerlach [paul@pwsan.com: fixed build errors for an AM43xx-only Kconfig] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/Makefile | 6 ++++-- arch/arm/mach-omap2/cm33xx.h | 2 +- arch/arm/mach-omap2/omap_hwmod.c | 6 +++--- 3 files changed, 8 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8421f38cf445..8ca99e9321e3 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -110,14 +110,16 @@ obj-y += prm_common.o cm_common.o obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o -obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \ prcm_mpu44xx.o prminst44xx.o \ vc44xx_data.o vp44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_DRA7XX) += $(omap-prcm-4-5-common) -obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) +am33xx-43xx-prcm-common += prm33xx.o cm33xx.o +obj-$(CONFIG_SOC_AM33XX) += $(am33xx-43xx-prcm-common) +obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) \ + $(am33xx-43xx-prcm-common) # OMAP voltage domains voltagedomain-common := voltage.o vc.o vp.o diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h index 15a778ce7707..bd2441790779 100644 --- a/arch/arm/mach-omap2/cm33xx.h +++ b/arch/arm/mach-omap2/cm33xx.h @@ -380,7 +380,7 @@ void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs); void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs); void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs); -#ifdef CONFIG_SOC_AM33XX +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs); extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index f7bb435bb543..6c074f37cdd2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -4251,9 +4251,9 @@ void __init omap_hwmod_init(void) soc_ops.enable_module = _omap4_enable_module; soc_ops.disable_module = _omap4_disable_module; soc_ops.wait_target_ready = _omap4_wait_target_ready; - soc_ops.assert_hardreset = _omap4_assert_hardreset; - soc_ops.deassert_hardreset = _omap4_deassert_hardreset; - soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; + soc_ops.assert_hardreset = _am33xx_assert_hardreset; + soc_ops.deassert_hardreset = _am33xx_deassert_hardreset; + soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted; soc_ops.init_clkdm = _init_clkdm; } else if (soc_is_am33xx()) { soc_ops.enable_module = _am33xx_enable_module; -- cgit v1.2.3 From bf32c4ad9924e2d60a23de4a3c074f806bf2ef05 Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Sun, 15 Jun 2014 16:02:18 -0600 Subject: ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods Create hwmods for ocp2scp3 and sata modules. [Roger Q] Clean up. CC: Benoit Cousson Signed-off-by: Balaji T K Signed-off-by: Roger Quadros Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 73 ++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 290213f2cbe3..1103aa0e0d29 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -2020,6 +2020,77 @@ static struct omap_hwmod omap54xx_wd_timer2_hwmod = { }, }; +/* + * 'ocp2scp' class + * bridge to transform ocp interface protocol to scp (serial control port) + * protocol + */ +/* ocp2scp3 */ +static struct omap_hwmod omap54xx_ocp2scp3_hwmod; +/* l4_cfg -> ocp2scp3 */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp3 = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_ocp2scp3_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod omap54xx_ocp2scp3_hwmod = { + .name = "ocp2scp3", + .class = &omap54xx_ocp2scp_hwmod_class, + .clkdm_name = "l3init_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* + * 'sata' class + * sata: serial ata interface gen2 compliant ( 1 rx/ 1 tx) + */ + +static struct omap_hwmod_class_sysconfig omap54xx_sata_sysc = { + .sysc_offs = 0x0000, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_sata_hwmod_class = { + .name = "sata", + .sysc = &omap54xx_sata_sysc, +}; + +/* sata */ +static struct omap_hwmod omap54xx_sata_hwmod = { + .name = "sata", + .class = &omap54xx_sata_hwmod_class, + .clkdm_name = "l3init_clkdm", + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, + .main_clk = "func_48m_fclk", + .mpu_rt_idx = 1, + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_SATA_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* l4_cfg -> sata */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__sata = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_sata_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; /* * Interfaces @@ -2765,6 +2836,8 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_cfg__usb_tll_hs, &omap54xx_l4_cfg__usb_otg_ss, &omap54xx_l4_wkup__wd_timer2, + &omap54xx_l4_cfg__ocp2scp3, + &omap54xx_l4_cfg__sata, NULL, }; -- cgit v1.2.3 From 9188883fd66e9809e93e06d5bbd49cf99a6cdbee Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Jun 2014 01:10:22 -0700 Subject: ARM: dts: Enable twl4030 off-idle configuration for selected omaps N900 now seems to shut down the external oscillator when hitting off-idle. And Beagle XM seems to have OSC_EN pin connected to allow shutting down the oscillator looking at the schematics. The oscillator output is cut off in off-idle and you can monitor it from R56 on the bottom side of the board near the power jack. Note that for beagle we need to also enable the UART wake-up event, the others have that enabled in earlier patches. OMAP37XX EVM (TMDSEVM3730) does not seem to have twl4030 clken pin connected, so there is no point trying to enable shutting down of the oscillator on it for the extra latency it adds. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-beagle-xm.dts | 6 ++++++ arch/arm/boot/dts/omap3-evm-common.dtsi | 7 +++++++ arch/arm/boot/dts/omap3-n900.dts | 5 +++++ 3 files changed, 18 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index cf0be662297e..1becefce821b 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -251,6 +251,11 @@ codec { }; }; + + twl_power: power { + compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; + ti,use_poweroff; + }; }; }; @@ -301,6 +306,7 @@ }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 8ae8f007c8ad..c8747c7f1cc8 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -50,6 +50,13 @@ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; }; +&twl { + twl_power: power { + compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle"; + ti,use_poweroff; + }; +}; + &i2c2 { clock-frequency = <400000>; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index ae8ae3f4f9bf..1fe45d1f75ec 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -351,6 +351,11 @@ compatible = "ti,twl4030-audio"; ti,enable-vibra = <1>; }; + + twl_power: power { + compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; + ti,use_poweroff; + }; }; &twl_keypad { -- cgit v1.2.3 From 73d202807a1ca7225d7b79d5e403cc48bf0adfdc Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 29 May 2014 14:05:50 -0500 Subject: ARM: DRA722: add detection of SoC information Add support for DRA72x device DIEID. Currently these devices are reported as DRA75/74 family of processors. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 12 ++++++++++++ arch/arm/mach-omap2/soc.h | 1 + 2 files changed, 13 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 43969da5d50b..d42022f2a71e 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -649,6 +649,18 @@ void __init dra7xxx_check_revision(void) } break; + case 0xb9bc: + switch (rev) { + case 0: + omap_revision = DRA722_REV_ES1_0; + break; + default: + /* If we have no new revisions */ + omap_revision = DRA722_REV_ES1_0; + break; + } + break; + default: /* Unknown default to latest silicon rev as default*/ pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n", diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index de2a34c423a7..01ca8086fb6c 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -462,6 +462,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define DRA7XX_CLASS 0x07000000 #define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8)) #define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8)) +#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8)) void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); -- cgit v1.2.3 From 05e7d1a57a268b491d0e24952d219a73c62bd3df Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 5 Jun 2014 20:09:46 -0500 Subject: ARM: dts: omap5: Update CPU OPP table as per final production Manual As per the Final production Data Manual for OMAP5432, SWPS050F(APRIL 2014) There are only two OPPs - 1GHz and 1.5GHz. the older OPP_LOW has been completely descoped. The Nominal voltages are still correct though. However, expectation for final production configuration is operation with Adaptive Body Bias (ABB) and Adaptive Voltage Scaling Class 0 operation. There are no IDcode or version change information encoded to programmatically detect this and software is supposed to NOT use OPP_LOW(500MHz) anymore for all devices (legacy and production samples). Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 3bfda16c8b52..a4ed54988866 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -45,7 +45,6 @@ operating-points = < /* kHz uV */ - 500000 880000 1000000 1060000 1500000 1250000 >; -- cgit v1.2.3 From fe797553e7f1acbce807e2ee3d86ca01c0e28b92 Mon Sep 17 00:00:00 2001 From: George Cherian Date: Fri, 6 Jun 2014 11:47:34 +0530 Subject: ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm AM437x EPOS evm use external clock for RMII interface. Enable the same in DT. Signed-off-by: George Cherian Reported-by: Nishanth Menon Tested-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 19f1f7e87597..90098f98a5c8 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -319,6 +319,10 @@ phy-mode = "rmii"; }; +&phy_sel { + rmii-clock-ext; +}; + &i2c0 { status = "okay"; pinctrl-names = "default"; -- cgit v1.2.3 From b7196ab07890bb1bc8f364dc341ee1251919111b Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 10 Jun 2014 14:26:36 -0700 Subject: ARM: OMAP2+: drop unused function gic_init_irq() is no longer used as of: commit b42b918194c4791510ac049e3d507169a7de8544 Author: Tony Lindgren Date: Thu May 30 12:53:05 2013 -0700 ARM: OMAP2+: Remove board-omap4panda.c Drop it. Signed-off-by: Brian Norris Cc: Tony Lindgren Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/common.h | 1 - arch/arm/mach-omap2/omap4-common.c | 20 -------------------- 2 files changed, 21 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index ff029737c8f0..51f6897418b7 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -241,7 +241,6 @@ static inline void __iomem *omap4_get_scu_base(void) } #endif -extern void __init gic_init_irq(void); extern void gic_dist_disable(void); extern void gic_dist_enable(void); extern bool gic_dist_disabled(void); diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 326cd982a3cb..539e8106eb96 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -102,26 +102,6 @@ void __init omap_barriers_init(void) {} #endif -void __init gic_init_irq(void) -{ - void __iomem *omap_irq_base; - - /* Static mapping, never released */ - gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); - BUG_ON(!gic_dist_base_addr); - - twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_4K); - BUG_ON(!twd_base); - - /* Static mapping, never released */ - omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); - BUG_ON(!omap_irq_base); - - omap_wakeupgen_init(); - - gic_init(0, 29, gic_dist_base_addr, omap_irq_base); -} - void gic_dist_disable(void) { if (gic_dist_base_addr) -- cgit v1.2.3 From 2ca0945fc103bac7e6469682b8e012d6bff5b9c4 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 7 May 2014 13:20:48 +0300 Subject: ARM: DTS: dra7/dra7xx-clocks: ATL related changes Modify the clock nodes for the ATL clocks to use the ATL clock driver to handle them. Add the ATL device node at the same time for DRA7. Signed-off-by: Peter Ujfalusi Acked-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++ arch/arm/boot/dts/dra7xx-clocks.dtsi | 16 ++++++++-------- 2 files changed, 19 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index c29945e07c5a..dca96b9509c4 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -984,6 +984,17 @@ #size-cells = <1>; status = "disabled"; }; + + atl: atl@4843c000 { + compatible = "ti,dra7-atl"; + reg = <0x4843c000 0x3ff>; + ti,hwmods = "atl"; + ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, + <&atl_clkin2_ck>, <&atl_clkin3_ck>; + clocks = <&atl_gfclk_mux>; + clock-names = "fck"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index b03cfe49d22b..c90c76de84d6 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -10,26 +10,26 @@ &cm_core_aon_clocks { atl_clkin0_ck: atl_clkin0_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin1_ck: atl_clkin1_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin2_ck: atl_clkin2_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; atl_clkin3_ck: atl_clkin3_ck { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; }; hdmi_clkin_ck: hdmi_clkin_ck { -- cgit v1.2.3 From b92ad209c26a1891c4e04cd75fc771dcb002603f Mon Sep 17 00:00:00 2001 From: Leela Krishna Amudala Date: Wed, 28 May 2014 00:43:21 +0900 Subject: ARM: EXYNOS: Use wfi macro in platform_do_lowpower This patch is originally based on commit b3377d186572 ("ARM: 7064/1: vexpress: Use wfi macro in platform_do_lowpower.") Current Exynos CPU hotplug code includes a hardcoded WFI instruction, in ARM encoding. When the kernel is compiled in Thumb-2 mode, this is invalid and causes the machine to hang hard when a CPU is offlined. Use wfi macro instead of the hardcoded WFI instruction. Signed-off-by: Leela Krishna Amudala Acked-by: Daniel Lezcano Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/hotplug.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index 69fa48397394..8a134d019cb3 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -46,13 +46,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) if (cpu == 1) exynos_cpu_power_down(cpu); - /* - * here's the WFI - */ - asm(".word 0xe320f003\n" - : - : - : "memory", "cc"); + wfi(); if (pen_release == cpu_logical_map(cpu)) { /* -- cgit v1.2.3 From cf286b405c446cc2c61e4ab210ef42e5852a6da3 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sat, 31 May 2014 02:21:42 +0900 Subject: ARM: dts: fix reg sizes of GIC for exynos4 This patch fixes reg entry sizes in GIC node that were not large enough to cover whole regions. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index b8ece4be41ca..fbaf426d2daa 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -113,7 +113,7 @@ compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x10490000 0x1000>, <0x10480000 0x100>; + reg = <0x10490000 0x10000>, <0x10480000 0x10000>; }; combiner: interrupt-controller@10440000 { -- cgit v1.2.3 From c021f241f4fab2bb4fc4120a38a828a03dd3f970 Mon Sep 17 00:00:00 2001 From: "David R. Piegdon" Date: Mon, 16 Jun 2014 23:42:51 +0000 Subject: ARM: OMAP2+: Fix parser-bug in platform muxing code Fix a parser-bug in the omap2 muxing code where muxtable-entries will be wrongly selected if the requested muxname is a *prefix* of their m0-entry and they have a matching mN-entry. Fix by additionally checking that the length of the m0_entry is equal. For example muxing of "dss_data2.dss_data2" on omap32xx will fail because the prefix "dss_data2" will match the mux-entries "dss_data2" as well as "dss_data20", with the suffix "dss_data2" matching m0 (for dss_data2) and m4 (for dss_data20). Thus both are recognized as signal path candidates: Relevant muxentries from mux34xx.c: _OMAP3_MUXENTRY(DSS_DATA20, 90, "dss_data20", NULL, "mcspi3_somi", "dss_data2", "gpio_90", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(DSS_DATA2, 72, "dss_data2", NULL, NULL, NULL, "gpio_72", NULL, NULL, "safe_mode"), This will result in a failure to mux the pin at all: _omap_mux_get_by_name: Multiple signal paths (2) for dss_data2.dss_data2 Patch should apply to linus' latest master down to rather old linux-2.6 trees. Signed-off-by: David R. Piegdon Cc: stable@vger.kernel.org [tony@atomide.com: updated description to include full description] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fd88edeb027f..f62f7537d899 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -183,8 +183,10 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, m0_entry = mux->muxnames[0]; /* First check for full name in mode0.muxmode format */ - if (mode0_len && strncmp(muxname, m0_entry, mode0_len)) - continue; + if (mode0_len) + if (strncmp(muxname, m0_entry, mode0_len) || + (strlen(m0_entry) != mode0_len)) + continue; /* Then check for muxmode only */ for (i = 0; i < OMAP_MUX_NR_MODES; i++) { -- cgit v1.2.3 From edc56f871eefbc56baf1fd981eeff35ef447925c Mon Sep 17 00:00:00 2001 From: Sourav Poddar Date: Tue, 17 Jun 2014 12:29:21 +0530 Subject: ARM: dts: dra7-evm: remove interrupt binding The qspi node defines crossbar number as its interrupt number. But, the crossbar dts patches are not yet there, this causes a warning during boot. So interrupts = < > property should be removed from DT and added later by crossbar series. Reported-by: Sricharan R Signed-off-by: Sourav Poddar Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index dca96b9509c4..80127638b379 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -773,7 +773,6 @@ clocks = <&qspi_gfclk_div>; clock-names = "fck"; num-cs = <4>; - interrupts = <0 343 0x4>; status = "disabled"; }; -- cgit v1.2.3 From 4ca2ad55553ef528c055761a9fa4d2c140f7318b Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Mon, 19 May 2014 15:46:41 +0800 Subject: ARM: imx6sl: add missing enet clock for imx6sl There's a enet clock gate missing in clock tree, thus add it. Signed-off-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6sl.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index 21cf06cebade..5408ca70c8d6 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -312,6 +312,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) clks[IMX6SL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2); clks[IMX6SL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4); clks[IMX6SL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6); + clks[IMX6SL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10); clks[IMX6SL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); clks[IMX6SL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); clks[IMX6SL_CLK_EXTERN_AUDIO] = imx_clk_gate2("extern_audio", "extern_audio_podf", base + 0x6c, 16); -- cgit v1.2.3 From 8c562a1ef8a1f7c74323d5d664a40c6a4317ae4e Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Mon, 19 May 2014 15:46:56 +0800 Subject: ARM: dts: imx6sl: correct the fec ipg clock source imx6sl fec MDIO clock source is from ipg 66Mhz, but the currect imx6sl device tree define it as "enet_ref" clock (50Mhz), so the patch just corrects imx6sl dtsi fec "ipg" clock. Signed-off-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 2d4e5285f3f3..57d4abe03a94 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -686,7 +686,7 @@ compatible = "fsl,imx6sl-fec", "fsl,imx25-fec"; reg = <0x02188000 0x4000>; interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_ENET_REF>, + clocks = <&clks IMX6SL_CLK_ENET>, <&clks IMX6SL_CLK_ENET_REF>; clock-names = "ipg", "ahb"; status = "disabled"; -- cgit v1.2.3 From 27fe8945e42e5fa64a8bca65e8c99a4c4989b6f2 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Wed, 21 May 2014 23:04:53 -0700 Subject: ARM: dts: imx6: ventana: fix include typo Fix typo and include the right dtsi file for the gw51xx board. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-gw51xx.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts index af4929aee075..0e1406e58eff 100644 --- a/arch/arm/boot/dts/imx6q-gw51xx.dts +++ b/arch/arm/boot/dts/imx6q-gw51xx.dts @@ -11,7 +11,7 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-gw54xx.dtsi" +#include "imx6qdl-gw51xx.dtsi" / { model = "Gateworks Ventana i.MX6 Quad GW51XX"; -- cgit v1.2.3 From 3c3868c52e8c002bc9c3af4529cbc79372f11b11 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 26 May 2014 10:40:31 +0200 Subject: ARM: dts: imx6qdl-gw5xxx: Fix Linear Technology vendor prefix The vendor prefix for Linear Technology should be lltc, same as the NASDAQ symbol. Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 31665adcbf39..0db15af41cb1 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -161,7 +161,7 @@ status = "okay"; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 367af3ec9435..c0ac27fc59e9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -220,7 +220,7 @@ }; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index c91b5a6c769b..adf150c1be90 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -234,7 +234,7 @@ }; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { -- cgit v1.2.3 From 5b4c180abc9d91a63f76f0388aefcc7908199eef Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 2 Jun 2014 11:44:01 -0700 Subject: ARM: dts: imx6: ventana: correct gw52xx sgtl5000 clock source Correct the invalid clock for the sgtl5000 audio codec on the GW52xx Ventana baseboard. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index c0ac27fc59e9..744c8a2d81f6 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -288,7 +288,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 169>; + clocks = <&clks 201>; VDDA-supply = <®_1p8v>; VDDIO-supply = <®_3p3v>; }; -- cgit v1.2.3 From 6aab4c2941a7f9438d343d31e2837aa77edd71aa Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 2 Jun 2014 18:12:36 +0100 Subject: ARM: 8068/1: scoop: Remove unused variable Remove the 'temp' variable in order to fix the following build warning: arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Signed-off-by: Fabio Estevam Signed-off-by: Russell King --- arch/arm/common/scoop.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 6ef146edd0cd..a20fa80776d3 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -182,7 +182,6 @@ static int scoop_probe(struct platform_device *pdev) struct scoop_config *inf; struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); int ret; - int temp; if (!mem) return -EINVAL; -- cgit v1.2.3 From 870cbe8cb2043d63dc5f110731df57599075f53d Mon Sep 17 00:00:00 2001 From: Nikolay Borisov Date: Tue, 3 Jun 2014 19:47:14 +0100 Subject: ARM: 8069/1: Make thread_save_fp macro aware of THUMB2 mode The thread_save_fp macro has been defined so that it always reads the fp member of the cpu_context_save struct. However, in the case of THUMB2 the fp is saved not in the fp (r11) member but rather in r7. This patch changes the way the macro is defined such that FP is read from the correct place depending on whether we are a THUMB2 kernel or not. This enables the backtrace in sitaution such as "echo t > /proc/sysrq-trigger" or the function in which a process sleeping when "ps -Al" is invoked. Signed-off-by: Nikolay Borisov Reviewed-by: Anurag Aggarwal Acked-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/thread_info.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index f989d7c22dc5..e4e4208a9130 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -114,8 +114,14 @@ static inline struct thread_info *current_thread_info(void) ((unsigned long)(task_thread_info(tsk)->cpu_context.pc)) #define thread_saved_sp(tsk) \ ((unsigned long)(task_thread_info(tsk)->cpu_context.sp)) + +#ifndef CONFIG_THUMB2_KERNEL #define thread_saved_fp(tsk) \ ((unsigned long)(task_thread_info(tsk)->cpu_context.fp)) +#else +#define thread_saved_fp(tsk) \ + ((unsigned long)(task_thread_info(tsk)->cpu_context.r7)) +#endif extern void crunch_task_disable(struct thread_info *); extern void crunch_task_copy(struct thread_info *, void *); -- cgit v1.2.3 From eea53bb16d0ff19c1fe2d29c359100df739a95d7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 17 Jun 2014 14:40:56 +0100 Subject: ARM: dts: cubox-i: add support for PWM-driven front panel LED The front panel LED on the Cubox-i is driven by one of the iMX6 PWM channels, and is wired between the PWM output and supply. Signed-off-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 25da82a03110..9202c8d18a30 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -12,6 +12,19 @@ pinctrl-0 = <&pinctrl_cubox_i_ir>; }; + pwmleds { + compatible = "pwm-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_pwm1>; + + front { + active-low; + label = "imx6:red:front"; + max-brightness = <248>; + pwms = <&pwm1 0 50000>; + }; + }; + regulators { compatible = "simple-bus"; @@ -109,6 +122,10 @@ >; }; + pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led { + fsl,pins = ; + }; + pinctrl_cubox_i_spdif: cubox-i-spdif { fsl,pins = ; }; -- cgit v1.2.3 From 589681b20688267a06a068d77ef10fc7c34168ba Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 17 Jun 2014 14:41:01 +0100 Subject: ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level The configuration of the USB OTG is a platform configuration decision, not a microsom decision. Move this configuration out to the platform level files. Signed-off-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-hummingboard.dts | 10 ++++++++++ arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 10 ++++++++++ arch/arm/boot/dts/imx6qdl-microsom.dtsi | 13 ------------- 3 files changed, 20 insertions(+), 13 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 5373a5f2782b..c8e51dd41b8f 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -143,6 +143,14 @@ fsl,pins = ; }; + pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = ; + }; + pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { fsl,pins = ; }; @@ -178,6 +186,8 @@ }; &usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 9202c8d18a30..e8e781656b3f 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -134,6 +134,14 @@ fsl,pins = ; }; + pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id { + /* + * The Cubox-i pulls this low, but as it's pointless + * leaving it as a pull-up, even if it is just 10uA. + */ + fsl,pins = ; + }; + pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { fsl,pins = ; }; @@ -170,6 +178,8 @@ }; &usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index d729d0b15f25..79eac6849d4c 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -10,14 +10,6 @@ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; - - pinctrl_microsom_usbotg: microsom-usbotg { - /* - * Similar to pinctrl_usbotg_2, but we want it - * pulled down for a fixed host connection. - */ - fsl,pins = ; - }; }; }; @@ -26,8 +18,3 @@ pinctrl-0 = <&pinctrl_microsom_uart1>; status = "okay"; }; - -&usbotg { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_microsom_usbotg>; -}; -- cgit v1.2.3 From 9796853e902447e53a17dae5df9eb609f0e31e6a Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 16 Jun 2014 11:23:00 +0200 Subject: ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6 This patch fixes two problems: - 1) The device tree isn't currently providing sti-ethclk which is required by the dwmac glue code to correctly configure the ethernet PHY clock speed. This means depending on what the bootloader/jtag has configured this clock to, and what switch/hub the board is plugged into you most likely will NOT successfully negotiate a ethernet link. 2) The stmmaceth clock was associated with the wrong clock. It was referencing the PHY clock rather than the interconnect clock which clocks the IP. This patch also brings us closer to not having to boot the upstream kernel with the clk_ignore_unused parameter. Acked-by: Lee Jones Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih415.dtsi | 8 ++++---- arch/arm/boot/dts/stih416.dtsi | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index d6f254f302fe..a0f6f75fe3b5 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -169,8 +169,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -192,8 +192,8 @@ reset-names = "stmmaceth"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 06473c5d9ea9..84758d76d064 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -175,8 +175,8 @@ reset-names = "stmmaceth"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -197,8 +197,8 @@ reset-names = "stmmaceth"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; - clock-names = "stmmaceth"; - clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { -- cgit v1.2.3 From 2ad501cc1d1062ac2cfd633e915f5aecda1a400f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 6 Jun 2014 09:38:35 +0200 Subject: ARM: omap2: fix am43xx dependency on l2x0 cache Commit d941f86fad41b ("ARM: l2c: AM43x: add L2 cache support") enabled the L2 cache support for the am43xx SoC, but caused a build regression when the driver for that cache controller is disabled: arch/arm/mach-omap2/built-in.o: In function `am43xx_init_early': :(.init.text+0xb20): undefined reference to `omap_l2_cache_init' This did not happen for OMAP4, which has the same call, but enables the l2x0 driver unconditionally. We could do the same thing for am43xx, but it seems better to allow turning it off and make the code work in either case. This adds an inline wrapper for omap_l2_cache_init for the disabled case, and removes the 'select' from OMAP4 so it becomes a user visible option. Signed-off-by: Arnd Bergmann Acked-by: Tony Lindgren Cc: linux-omap@vger.kernel.org --- arch/arm/configs/omap2plus_defconfig | 1 + arch/arm/mach-omap2/Kconfig | 1 - arch/arm/mach-omap2/common.h | 7 +++++++ 3 files changed, 8 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 59066cf0271a..536a137863cb 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -32,6 +32,7 @@ CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y +CONFIG_CACHE_L2X0=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y CONFIG_SMP=y diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 0ba482638ebf..2085b3d42ed6 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -28,7 +28,6 @@ config ARCH_OMAP4 select ARM_CPU_SUSPEND if PM select ARM_ERRATA_720789 select ARM_GIC - select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select OMAP_INTERCONNECT diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index ff029737c8f0..a373d508799a 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -91,7 +91,14 @@ extern void omap3_sync32k_timer_init(void); extern void omap3_secure_sync32k_timer_init(void); extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); +#ifdef CONFIG_CACHE_L2X0 int omap_l2_cache_init(void); +#else +static inline int omap_l2_cache_init(void) +{ + return 0; +} +#endif extern void omap5_realtime_timer_init(void); void omap2420_init_early(void); -- cgit v1.2.3 From 13ee8955473152e1194951ccdf813b29f9407455 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 12 May 2014 14:42:34 +0200 Subject: ARM: keystone requires ARM_PATCH_PHYS_VIRT The dynamic relocation that the keystone platform performs only works if we can pick the phys offset at boot time. It's possible that there is another solution for this, but this is the easiest workaround. Kernels with ARM_PATCH_PHYS_VIRT are not portable across platforms, and I see no reason why anyone would run a kernel without ARM_PATCH_PHYS_VIRT on keystone. Signed-off-by: Arnd Bergmann Acked-by: Santosh Shilimkar --- arch/arm/mach-keystone/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index f50bc936cb84..98a156afaa94 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -1,6 +1,7 @@ config ARCH_KEYSTONE bool "Texas Instruments Keystone Devices" depends on ARCH_MULTI_V7 + depends on ARM_PATCH_PHYS_VIRT select ARM_GIC select HAVE_ARM_ARCH_TIMER select CLKSRC_MMIO -- cgit v1.2.3 From 27873b052e6e54eec606ed93f26be4b26d6e9d17 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 13 Jun 2014 12:04:39 +0200 Subject: ARM: samsung: make SAMSUNG_DMADEV optional The only remaining driver using the samsung dmadev code is the broken samsung-ac97 sound driver. However, as found by Russell's autobuilder, the elaborate dependency chains around it cause problems with circular dependencies. This is an attempt to simplify those dependencies by making the SAMSUNG_DMADEV option user-selectable. I also try to keep the default settings for all related options unchanged, so we don't introduce any regressions against earlier testing on linux-next. In particular, all s3c64xx and s5p* platforms keep selecting the pl330 and pl08x drivers they require, but the select statement is now moved towards the main platform option, and it remains optional by unselecting CONFIG_DMADEVICES. Signed-off-by: Arnd Bergmann Cc: Kukjin Kim --- arch/arm/mach-s3c24xx/Kconfig | 2 +- arch/arm/mach-s3c64xx/Kconfig | 4 ++-- arch/arm/mach-s5p64x0/Kconfig | 6 ++++-- arch/arm/mach-s5pc100/Kconfig | 3 ++- arch/arm/mach-s5pv210/Kconfig | 3 ++- arch/arm/plat-samsung/Kconfig | 11 +++++------ 6 files changed, 16 insertions(+), 13 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 04284de7aca5..ad5316ae524e 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -117,7 +117,7 @@ config S3C24XX_SETUP_TS Compile in platform device definition for Samsung TouchScreen. config S3C24XX_DMA - bool "S3C2410 DMA support" + bool "S3C2410 DMA support (deprecated)" select S3C_DMA help S3C2410 DMA support. This is needed for drivers like sound which diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 3136d86b0d6e..26ca2427e53d 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -18,9 +18,9 @@ config CPU_S3C6410 Enable S3C6410 CPU support config S3C64XX_PL080 - bool "S3C64XX DMA using generic PL08x driver" + def_bool DMADEVICES + select ARM_AMBA select AMBA_PL08X - select SAMSUNG_DMADEV config S3C64XX_SETUP_SDHCI bool diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index bb2111b3751e..26003e23796d 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -9,16 +9,18 @@ if ARCH_S5P64X0 config CPU_S5P6440 bool + select ARM_AMBA + select PL330_DMA if DMADEVICES select S5P_SLEEP if PM - select SAMSUNG_DMADEV select SAMSUNG_WAKEMASK if PM help Enable S5P6440 CPU support config CPU_S5P6450 bool + select ARM_AMBA + select PL330_DMA if DMADEVICES select S5P_SLEEP if PM - select SAMSUNG_DMADEV select SAMSUNG_WAKEMASK if PM help Enable S5P6450 CPU support diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 15170be97a74..c5e3a969b063 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -9,8 +9,9 @@ if ARCH_S5PC100 config CPU_S5PC100 bool + select ARM_AMBA + select PL330_DMA if DMADEVICES select S5P_EXT_INT - select SAMSUNG_DMADEV help Enable S5PC100 CPU support diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 8c3abe521757..f60f2862856d 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,10 +11,11 @@ if ARCH_S5PV210 config CPU_S5PV210 bool + select ARM_AMBA + select PL330_DMA if DMADEVICES select S5P_EXT_INT select S5P_PM if PM select S5P_SLEEP if PM - select SAMSUNG_DMADEV help Enable S5PV210 CPU support diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 243dfcb2ca0e..91911e47a8a1 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -407,17 +407,16 @@ config SAMSUNG_PM_GPIO Include legacy GPIO power management code for platforms not using pinctrl-samsung driver. -endif - config SAMSUNG_DMADEV - bool - select ARM_AMBA + bool "Use legacy Samsung DMA abstraction" + depends on CPU_S5PV210 || CPU_S5PC100 || ARCH_S5P64X0 || ARCH_S3C64XX select DMADEVICES - select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \ - CPU_S5P6450 || CPU_S5P6440) + default y help Use DMA device engine for PL330 DMAC. +endif + config S5P_DEV_MFC bool help -- cgit v1.2.3 From e47043aea3853a74a9aa5726a1faa916d7462ab7 Mon Sep 17 00:00:00 2001 From: Jason Cooper Date: Wed, 4 Jun 2014 13:41:20 +0000 Subject: ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM size The OpenBlocks AX3-4 has a non-DT bootloader. It also comes with 1GB of soldered on RAM, and a DIMM slot for expansion. Unfortunately, atags_to_fdt() doesn't work in big-endian mode, so we see the following failure when attempting to boot a big-endian kernel: 686 slab pages 17 pages shared 0 pages swap cached [ pid ] uid tgid total_vm rss nr_ptes swapents oom_score_adj name Kernel panic - not syncing: Out of memory and no killable processes... CPU: 1 PID: 351 Comm: kworker/u4:0 Not tainted 3.15.0-rc8-next-20140603 #1 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x78/0x94) [] (dump_stack) from [] (panic+0x90/0x21c) [] (panic) from [] (out_of_memory+0x320/0x340) [] (out_of_memory) from [] (__alloc_pages_nodemask+0x874/0x930) [] (__alloc_pages_nodemask) from [] (handle_mm_fault+0x744/0x96c) [] (handle_mm_fault) from [] (__get_user_pages+0xd0/0x4c0) [] (__get_user_pages) from [] (get_arg_page+0x54/0xbc) [] (get_arg_page) from [] (copy_strings+0x278/0x29c) [] (copy_strings) from [] (copy_strings_kernel+0x20/0x28) [] (copy_strings_kernel) from [] (do_execve+0x3a8/0x4c8) [] (do_execve) from [] (____call_usermodehelper+0x15c/0x194) [] (____call_usermodehelper) from [] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc8-next-20140603 #1 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x78/0x94) [] (dump_stack) from [] (handle_IPI+0x138/0x174) [] (handle_IPI) from [] (armada_370_xp_handle_irq+0xb0/0xcc) [] (armada_370_xp_handle_irq) from [] (__irq_svc+0x40/0x50) Exception stack(0xc0b6bf68 to 0xc0b6bfb0) bf60: e9fad598 00000000 00f509a3 00000000 c0b6a000 c0b724c4 bf80: c0b72458 c0b6a000 00000000 00000000 c0b66da0 c0b6a000 00000000 c0b6bfb0 bfa0: c027bb94 c027bb24 60000313 ffffffff [] (__irq_svc) from [] (cpu_startup_entry+0x54/0x214) [] (cpu_startup_entry) from [] (start_kernel+0x318/0x37c) [] (start_kernel) from [<00208078>] (0x208078) ---[ end Kernel panic - not syncing: Out of memory and no killable processes... A similar failure will also occur if ARM_ATAG_DTB_COMPAT isn't selected. Fix this by setting a sane default (1 GB) in the dts file. Signed-off-by: Jason Cooper Tested-by: Kevin Hilman Cc: #v3.13+ Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index e5c6a0492ca0..4e5a59ee1501 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -25,7 +25,7 @@ memory { device_type = "memory"; - reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */ + reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */ }; soc { -- cgit v1.2.3 From e1318391fda4060b77d638fa1d2e1987590c7d45 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 4 Jun 2014 14:47:28 +0200 Subject: ARM: integrator: fix section mismatch problem This addresses a section mismatch problem in the IM-PD1 driver in the Integrator/AP. The IM-PD1 contains a VIC interrupt controller and therefore the driver calls vic_init_cascaded() which is marked __init as irqchips are simply not hot-pluggable and specifically the VIC is assumed to initiate only on boot. However the module driver model of the Integrator LM bus assumes that logic tile drivers can be probed at runtime. This is not really the case for IM-PD1: these tiles are detected at boot and they cannot be plugged into a running system. Before this patch it is of course possible to modprobe them later. By first forcing the IM-PD1 to bool we make sure this driver gets compiled into the kernel, and we know it will be probed only at boot time when the tiles are detected, so we can tag its probe function __init_refok as we know it won't be called after boot now, and the section mismatch problem goes away. As a side effect, sysfs binding from userspace becomes impossible, so we tag the driver to suppress the bind/unbind sysfs attributes. Cc: Russell King Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- arch/arm/mach-integrator/Kconfig | 2 +- arch/arm/mach-integrator/impd1.c | 12 +++++++++++- 2 files changed, 12 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index ba43321001d8..64f8e2564a37 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -28,7 +28,7 @@ config ARCH_CINTEGRATOR bool config INTEGRATOR_IMPD1 - tristate "Include support for Integrator/IM-PD1" + bool "Include support for Integrator/IM-PD1" depends on ARCH_INTEGRATOR_AP select ARCH_REQUIRE_GPIOLIB select ARM_VIC diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 0e870ea818c4..3ce880729cff 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -308,7 +308,12 @@ static struct impd1_device impd1_devs[] = { */ #define IMPD1_VALID_IRQS 0x00000bffU -static int __init impd1_probe(struct lm_device *dev) +/* + * As this module is bool, it is OK to have this as __init_refok() - no + * probe calls will be done after the initial system bootup, as devices + * are discovered as part of the machine startup. + */ +static int __init_refok impd1_probe(struct lm_device *dev) { struct impd1_module *impd1; int irq_base; @@ -397,6 +402,11 @@ static void impd1_remove(struct lm_device *dev) static struct lm_driver impd1_driver = { .drv = { .name = "impd1", + /* + * As we're dropping the probe() function, suppress driver + * binding from sysfs. + */ + .suppress_bind_attrs = true, }, .probe = impd1_probe, .remove = impd1_remove, -- cgit v1.2.3 From 19682f72f5db906c393a5c61b8db2476974f8172 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 3 Jun 2014 11:24:23 -0700 Subject: ARM: Remove ARCH_HAS_CPUFREQ config option This config exists entirely to hide the cpufreq menu from the kernel configuration unless a platform has selected it. Nothing is actually built if this config is 'Y' and it just leads to more patches that add a select under a platform Kconfig so that some other CPUfreq option can be chosen. Let's remove the option so that we can always enable CPUfreq drivers on ARM platforms. Acked-by: Viresh Kumar Signed-off-by: Stephen Boyd Signed-off-by: Arnd Bergmann --- arch/arm/Kconfig | 17 ----------------- arch/arm/mach-davinci/Kconfig | 1 - arch/arm/mach-exynos/Kconfig | 1 - arch/arm/mach-highbank/Kconfig | 1 - arch/arm/mach-imx/Kconfig | 3 --- arch/arm/mach-mvebu/Kconfig | 1 - arch/arm/mach-omap2/Kconfig | 1 - arch/arm/mach-shmobile/Kconfig | 2 -- arch/arm/mach-spear/Kconfig | 1 - arch/arm/mach-tegra/Kconfig | 1 - arch/arm/mach-ux500/Kconfig | 1 - arch/arm/mach-vexpress/Kconfig | 1 - arch/arm/mach-vt8500/Kconfig | 1 - arch/arm/mach-zynq/Kconfig | 1 - 14 files changed, 33 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 87b63fde06d7..9b8f5284ccc3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -175,13 +175,6 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 bool -config ARCH_HAS_CPUFREQ - bool - help - Internal node to signify that the ARCH has CPUFREQ support - and that the relevant menu configurations are displayed for - it. - config ARCH_HAS_BANDGAP bool @@ -318,7 +311,6 @@ config ARCH_MULTIPLATFORM config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" - select ARCH_HAS_CPUFREQ select ARM_AMBA select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR @@ -538,7 +530,6 @@ config ARCH_DOVE config ARCH_KIRKWOOD bool "Marvell Kirkwood" - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select GENERIC_CLOCKEVENTS @@ -637,7 +628,6 @@ config ARCH_LPC32XX config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU - select ARCH_HAS_CPUFREQ select ARCH_MTD_XIP select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM @@ -707,7 +697,6 @@ config ARCH_RPC config ARCH_SA1100 bool "SA1100-based" - select ARCH_HAS_CPUFREQ select ARCH_MTD_XIP select ARCH_REQUIRE_GPIOLIB select ARCH_SPARSEMEM_ENABLE @@ -725,7 +714,6 @@ config ARCH_SA1100 config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ATAGS select CLKDEV_LOOKUP @@ -746,7 +734,6 @@ config ARCH_S3C24XX config ARCH_S3C64XX bool "Samsung S3C64XX" - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC @@ -809,7 +796,6 @@ config ARCH_S5PC100 config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SPARSEMEM_ENABLE select ATAGS @@ -845,7 +831,6 @@ config ARCH_DAVINCI config ARCH_OMAP1 bool "TI OMAP1" depends on MMU - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB @@ -2109,9 +2094,7 @@ endmenu menu "CPU Power Management" -if ARCH_HAS_CPUFREQ source "drivers/cpufreq/Kconfig" -endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index db18ef866593..584e8d4e2892 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -39,7 +39,6 @@ config ARCH_DAVINCI_DA830 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" select ARCH_DAVINCI_DA8XX - select ARCH_HAS_CPUFREQ select CP_INTC config ARCH_DAVINCI_DA8XX diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d58995c9a95a..845031b50826 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -10,7 +10,6 @@ config ARCH_EXYNOS bool "Samsung EXYNOS" if ARCH_MULTI_V7 select ARCH_HAS_BANDGAP - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_REQUIRE_GPIOLIB select ARM_AMBA diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 830b76e70250..a5960e2ac090 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,7 +1,6 @@ config ARCH_HIGHBANK bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 8d42eab76d53..b2323403ea25 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,6 +1,5 @@ config ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM @@ -99,7 +98,6 @@ config SOC_IMX25 config SOC_IMX27 bool - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select CPU_ARM926T select IMX_HAVE_IOMUX_V1 @@ -124,7 +122,6 @@ config SOC_IMX35 config SOC_IMX5 bool - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 select MXC_TZIC diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 6090b9eb00c8..c8bef39ec199 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -84,7 +84,6 @@ config MACH_DOVE config MACH_KIRKWOOD bool "Marvell Kirkwood boards" if ARCH_MULTI_V5 - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select KIRKWOOD_CLK diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 2085b3d42ed6..000601255f2b 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -79,7 +79,6 @@ config SOC_DRA7XX config ARCH_OMAP2PLUS bool select ARCH_HAS_BANDGAP - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index dbd954e61aa7..270e5caf3c97 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -85,7 +85,6 @@ config ARCH_R8A73A4 select CPU_V7 select SH_CLK_CPG select RENESAS_IRQC - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU @@ -264,7 +263,6 @@ config MACH_KOELSCH config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index 0786249b2832..90df2022276a 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -14,7 +14,6 @@ if PLAT_SPEAR config ARCH_SPEAR13XX bool "ST SPEAr13xx" depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE - select ARCH_HAS_CPUFREQ select ARM_GIC select GPIO_SPEAR_SPICS select HAVE_ARM_SCU if SMP diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index e16999e5b735..8981ed49787d 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -1,6 +1,5 @@ config ARCH_TEGRA bool "NVIDIA Tegra" if ARCH_MULTI_V7 - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS select ARM_GIC diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index b41a42da1505..9b93144c1c2b 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -3,7 +3,6 @@ config ARCH_U8500 depends on MMU select AB8500_CORE select ABX500_CORE - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_ERRATA_754322 diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 90249cfc37b3..2e2e8bbb88d7 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -65,7 +65,6 @@ config ARCH_VEXPRESS_DCSCB config ARCH_VEXPRESS_SPC bool "Versatile Express Serial Power Controller (SPC)" - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select PM_OPP help diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index 08f56a41cb55..aaaa24fe4d71 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -1,6 +1,5 @@ config ARCH_VT8500 bool - select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select VT8500_TIMER diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 573e0db1d0f0..0c164f81e72d 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -1,6 +1,5 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 - select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA -- cgit v1.2.3 From e509b289f7a7d9a261c5f583b55bd1110d8e2593 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 10 Jun 2014 09:06:09 -0500 Subject: ARM: exynos: cleanup kconfig option display The addition of Exynos to multi-platform configs creates a mess of config options with options appearing before the Exynos config option. This is due to arch/arm/plat-samsung/Kconfig being included out of order with the other Samsung platform kconfig files. Reorder the kconfig files and move all the options into a sub-menu. Some of the options are dead, so remove those as well. Signed-off-by: Rob Herring Cc: Ben Dooks Cc: Kukjin Kim Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Arnd Bergmann --- arch/arm/Kconfig | 3 +-- arch/arm/plat-samsung/Kconfig | 17 +++-------------- 2 files changed, 4 insertions(+), 16 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9b8f5284ccc3..245058b3b0ef 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -994,8 +994,6 @@ source "arch/arm/mach-rockchip/Kconfig" source "arch/arm/mach-sa1100/Kconfig" -source "arch/arm/plat-samsung/Kconfig" - source "arch/arm/mach-socfpga/Kconfig" source "arch/arm/mach-spear/Kconfig" @@ -1013,6 +1011,7 @@ source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" source "arch/arm/mach-exynos/Kconfig" +source "arch/arm/plat-samsung/Kconfig" source "arch/arm/mach-shmobile/Kconfig" diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 91911e47a8a1..301b892d97d9 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -35,27 +35,15 @@ config SAMSUNG_PM Base platform power management code for samsung code if PLAT_SAMSUNG +menu "Samsung Common options" # boot configurations comment "Boot options" -config S3C_BOOT_ERROR_RESET - bool "S3C Reboot on decompression error" - help - Say y here to use the watchdog to reset the system if the - kernel decompressor detects an error during decompression. - -config S3C_BOOT_UART_FORCE_FIFO - bool "Force UART FIFO on during boot process" - default y - help - Say Y here to force the UART FIFOs on during the kernel - uncompressor - - config S3C_LOWLEVEL_UART_PORT int "S3C UART to use for low-level messages" + depends on ARCH_S3C64XX default 0 help Choice of which UART port to use for the low-level messages, @@ -502,4 +490,5 @@ config DEBUG_S3C_UART default "2" if DEBUG_S3C_UART2 default "3" if DEBUG_S3C_UART3 +endmenu endif -- cgit v1.2.3 From 3364ee57ae730ab3029172c6ae7487fb37049d38 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Sat, 24 May 2014 11:17:09 -0300 Subject: ARM: dts: Specify the NAND ECC scheme explicitly on Armada 375 DB board The factory bootloader on A375-DB boards expect the ECC strength to be 4 bits over 512 bytes. Hence, we need to specify this in the devicetree, to prevent the kernel from assuming any different ECC scheme. Signed-off-by: Ezequiel Garcia Link: https://lkml.kernel.org/r/1400941030-2123-2-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-375-db.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 772fec2d26ce..1e2919d43d78 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -91,6 +91,8 @@ marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; partition@0 { label = "U-Boot"; -- cgit v1.2.3 From 1ad58443cfa7a60a058f1b956054f19a1d00162d Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Sat, 24 May 2014 11:17:10 -0300 Subject: ARM: dts: Specify the NAND ECC scheme explicitly on Armada 385 DB board The factory bootloader on A385-DB boards expect the ECC strength to be 4 bits over 512 bytes. Hence, we need to specify this in the devicetree, to prevent the kernel from assuming any different ECC scheme. Signed-off-by: Ezequiel Garcia Link: https://lkml.kernel.org/r/1400941030-2123-3-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-385-db.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts index ff9637dd8d0f..5bae4731828b 100644 --- a/arch/arm/boot/dts/armada-385-db.dts +++ b/arch/arm/boot/dts/armada-385-db.dts @@ -98,6 +98,8 @@ marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; partition@0 { label = "U-Boot"; -- cgit v1.2.3 From 1754c42e3db5f45dbd8d509f0366b4ed97687180 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Mon, 2 Jun 2014 21:47:46 -0700 Subject: ARM: exynos: move sysram info to exynos.c This solves a problem with building with CONFIG_SMP=n due to missing sysram_base_addr (or sysram_ns_base_addr) variables. The new setup method is more awkward than I'd like for it to be, but it can't be done in init_early() since ioremap is not yet available, but it needs to happen before SMP. Reported-by: Russell King Cc: Kukjin Kim Cc: Daniel Lezcano Signed-off-by: Olof Johansson Reviewed-by: Tomasz Figa Signed-off-by: Arnd Bergmann --- arch/arm/mach-exynos/common.h | 1 + arch/arm/mach-exynos/exynos.c | 29 +++++++++++++++++++++++++++++ arch/arm/mach-exynos/platsmp.c | 26 ++------------------------ 3 files changed, 32 insertions(+), 24 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 16617bdb37a9..1ee91763fa7c 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -118,6 +118,7 @@ extern void __iomem *sysram_ns_base_addr; extern void __iomem *sysram_base_addr; void exynos_init_io(void); void exynos_restart(enum reboot_mode mode, const char *cmd); +void exynos_sysram_init(void); void exynos_cpuidle_init(void); void exynos_cpufreq_init(void); void exynos_init_late(void); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 90aab4d75d08..fb1eadd9e30c 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -184,6 +184,28 @@ void __init exynos_cpufreq_init(void) platform_device_register_simple("exynos-cpufreq", -1, NULL, 0); } +void __iomem *sysram_base_addr; +void __iomem *sysram_ns_base_addr; + +void __init exynos_sysram_init(void) +{ + struct device_node *node; + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") { + if (!of_device_is_available(node)) + continue; + sysram_base_addr = of_iomap(node, 0); + break; + } + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") { + if (!of_device_is_available(node)) + continue; + sysram_ns_base_addr = of_iomap(node, 0); + break; + } +} + void __init exynos_init_late(void) { if (of_machine_is_compatible("samsung,exynos5440")) @@ -271,6 +293,13 @@ static void __init exynos_dt_machine_init(void) } } + /* + * This is called from smp_prepare_cpus if we've built for SMP, but + * we still need to set it up for PM and firmware ops if not. + */ + if (!IS_ENABLED(SMP)) + exynos_sysram_init(); + exynos_cpuidle_init(); exynos_cpufreq_init(); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index ec02422e8499..1c8d31e39520 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -32,28 +32,6 @@ extern void exynos4_secondary_startup(void); -void __iomem *sysram_base_addr; -void __iomem *sysram_ns_base_addr; - -static void __init exynos_smp_prepare_sysram(void) -{ - struct device_node *node; - - for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") { - if (!of_device_is_available(node)) - continue; - sysram_base_addr = of_iomap(node, 0); - break; - } - - for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") { - if (!of_device_is_available(node)) - continue; - sysram_ns_base_addr = of_iomap(node, 0); - break; - } -} - static inline void __iomem *cpu_boot_reg_base(void) { if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) @@ -234,11 +212,11 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) { int i; + exynos_sysram_init(); + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) scu_enable(scu_base_addr()); - exynos_smp_prepare_sysram(); - /* * Write the address of secondary startup into the * system-wide flags register. The boot monitor waits -- cgit v1.2.3 From 3eb9364656d229532abd3f30ffaf6650abcbfeef Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 5 May 2014 14:56:48 +0530 Subject: ARM: EXYNOS: Fix compilation warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit of_get_flat_dt_prop return type is now const. Fixes the following compilation warning introduced by commit 9d0c4dfedd96 ("of/fdt: update of_get_flat_dt_prop in prep for libfdt") arch/arm/mach-exynos/exynos.c:259:6: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] Signed-off-by: Sachin Kamat Reviewed-by: Tushar Behera Cc: Rob Herring Signed-off-by: Arnd Bergmann --- arch/arm/mach-exynos/exynos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index fb1eadd9e30c..f38cf7c110cc 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -220,7 +220,7 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, int depth, void *data) { struct map_desc iodesc; - __be32 *reg; + const __be32 *reg; int len; if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") && -- cgit v1.2.3 From 216e9d3e8b00424c13ca76ef97d707ddc7f57a8b Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 16 Jun 2014 10:50:42 -0600 Subject: ARM: multi_v7_defconfig: re-enable SDHCI drivers Following 5d01b7684b7e "mmc: simplify SDHCI Kconfig dependencies", SDHCI drivers that use MMC_SDHCI_PLTFM no longer select it, but instead depend on it. This means that multi_v7_defconfig no longer selects it, and hence many SDHCI drivers are no longer enabled. Explicitly enable MMC_SDHCI_PLTFM to solve this. Fixes: 5d01b7684b7e ("mmc: simplify SDHCI Kconfig dependencies") Signed-off-by: Stephen Warren Tested-by: Matt Porter Signed-off-by: Arnd Bergmann --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e2d62048e198..17d9462b9fb9 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -300,6 +300,7 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_DOVE=y -- cgit v1.2.3 From 21278aeafbfacfd62b3e613525f0c694a029dac1 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 10 Jun 2014 09:06:10 -0500 Subject: ARM: use menuconfig for sub-arch menus The System Type menu is getting quite long with platforms and is inconsistent in handling of sub-arch specific options. Tidy up the menu by making platform options a menuconfig entry containing any platform specific config items. [arnd: change OMAP part according to suggestion from Tony Lindgren ] Signed-off-by: Rob Herring Signed-off-by: Arnd Bergmann --- arch/arm/mach-bcm/Kconfig | 7 +++---- arch/arm/mach-berlin/Kconfig | 6 +----- arch/arm/mach-cns3xxx/Kconfig | 7 +++---- arch/arm/mach-exynos/Kconfig | 6 +----- arch/arm/mach-imx/Kconfig | 7 +++---- arch/arm/mach-moxart/Kconfig | 2 +- arch/arm/mach-mvebu/Kconfig | 6 +----- arch/arm/mach-nomadik/Kconfig | 4 +--- arch/arm/mach-omap2/Kconfig | 5 +++++ arch/arm/mach-prima2/Kconfig | 6 ++---- arch/arm/mach-qcom/Kconfig | 6 +----- arch/arm/mach-shmobile/Kconfig | 4 ++-- arch/arm/mach-sti/Kconfig | 2 +- arch/arm/mach-tegra/Kconfig | 7 +++---- arch/arm/mach-u300/Kconfig | 6 +----- arch/arm/mach-ux500/Kconfig | 6 +----- arch/arm/mach-vexpress/Kconfig | 7 +++---- 17 files changed, 33 insertions(+), 61 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 9bc6db1c1348..41c839167e87 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -1,10 +1,9 @@ -config ARCH_BCM +menuconfig ARCH_BCM bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7 help This enables support for Broadcom ARM based SoC chips -menu "Broadcom SoC Selection" - depends on ARCH_BCM +if ARCH_BCM config ARCH_BCM_MOBILE bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7 @@ -88,4 +87,4 @@ config ARCH_BCM_5301X different SoC or with the older BCM47XX and BCM53XX based network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx -endmenu +endif diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 101e0f356730..2631cfc5ab0d 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,4 +1,4 @@ -config ARCH_BERLIN +menuconfig ARCH_BERLIN bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_GIC @@ -9,8 +9,6 @@ config ARCH_BERLIN if ARCH_BERLIN -menu "Marvell Berlin SoC variants" - config MACH_BERLIN_BG2 bool "Marvell Armada 1500 (BG2)" select CACHE_L2X0 @@ -30,6 +28,4 @@ config MACH_BERLIN_BG2Q select HAVE_ARM_TWD if SMP select PINCTRL_BERLIN_BG2Q -endmenu - endif diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index 66838f42037f..3c22a1990ecd 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,12 +1,11 @@ -config ARCH_CNS3XXX +menuconfig ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 select ARM_GIC select PCI_DOMAINS if PCI help Support for Cavium Networks CNS3XXX platform. -menu "CNS3XXX platform type" - depends on ARCH_CNS3XXX +if ARCH_CNS3XXX config MACH_CNS3420VB bool "Support for CNS3420 Validation Board" @@ -17,4 +16,4 @@ config MACH_CNS3420VB This is a platform with an on-board ARM11 MPCore and has support for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc. -endmenu +endif diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 845031b50826..8f9b66c4ac78 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -7,7 +7,7 @@ # Configuration options for the EXYNOS4 -config ARCH_EXYNOS +menuconfig ARCH_EXYNOS bool "Samsung EXYNOS" if ARCH_MULTI_V7 select ARCH_HAS_BANDGAP select ARCH_HAS_HOLES_MEMORYMODEL @@ -29,8 +29,6 @@ config ARCH_EXYNOS if ARCH_EXYNOS -menu "SAMSUNG EXYNOS SoCs Support" - config ARCH_EXYNOS3 bool "SAMSUNG EXYNOS3" select ARM_CPU_SUSPEND if PM @@ -117,8 +115,6 @@ config SOC_EXYNOS5800 default y depends on SOC_EXYNOS5420 -endmenu - config EXYNOS5420_MCPM bool "Exynos5420 Multi-Cluster PM support" depends on MCPM && SOC_EXYNOS5420 diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index b2323403ea25..28fa2fa49e5d 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,4 +1,4 @@ -config ARCH_MXC +menuconfig ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB @@ -12,8 +12,7 @@ config ARCH_MXC help Support for Freescale MXC/iMX-based family of processors -menu "Freescale i.MX support" - depends on ARCH_MXC +if ARCH_MXC config MXC_TZIC bool @@ -783,4 +782,4 @@ endif source "arch/arm/mach-imx/devices/Kconfig" -endmenu +endif diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index 82a4ba8578a2..f49328c39bef 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -1,4 +1,4 @@ -config ARCH_MOXART +menuconfig ARCH_MOXART bool "MOXA ART SoC" if ARCH_MULTI_V4 select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index c8bef39ec199..4a7c250c9a30 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,4 +1,4 @@ -config ARCH_MVEBU +menuconfig ARCH_MVEBU bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5) select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO @@ -13,8 +13,6 @@ config ARCH_MVEBU if ARCH_MVEBU -menu "Marvell EBU SoC variants" - config MACH_MVEBU_V7 bool select ARMADA_370_XP_TIMER @@ -96,6 +94,4 @@ config MACH_KIRKWOOD Say 'Y' here if you want your kernel to support boards based on the Marvell Kirkwood device tree. -endmenu - endif diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 486d301f43fd..3c61096c8627 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -1,4 +1,4 @@ -config ARCH_NOMADIK +menuconfig ARCH_NOMADIK bool "ST-Ericsson Nomadik" depends on ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB @@ -15,7 +15,6 @@ config ARCH_NOMADIK Support for the Nomadik platform by ST-Ericsson if ARCH_NOMADIK -menu "Nomadik boards" config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" @@ -24,7 +23,6 @@ config MACH_NOMADIK_8815NHK select I2C_ALGOBIT select I2C_NOMADIK -endmenu endif config NOMADIK_8815 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 000601255f2b..062505345c95 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -1,3 +1,6 @@ +menu "TI OMAP/AM/DM/DRA Family" + depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 + config ARCH_OMAP bool @@ -341,3 +344,5 @@ config OMAP4_ERRATA_I688 endmenu endif + +endmenu diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index e4e505f52ba0..042f693ef423 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -1,4 +1,4 @@ -config ARCH_SIRF +menuconfig ARCH_SIRF bool "CSR SiRF" if ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB @@ -11,7 +11,7 @@ config ARCH_SIRF if ARCH_SIRF -menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" +comment "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" config ARCH_ATLAS6 bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform" @@ -37,8 +37,6 @@ config ARCH_MARCO help Support for CSR SiRFSoC ARM Cortex A9 Platform -endmenu - config SIRF_IRQ bool diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index fd2b99dceb89..ee5697ba05bc 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -1,4 +1,4 @@ -config ARCH_QCOM +menuconfig ARCH_QCOM bool "Qualcomm Support" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_GIC @@ -11,8 +11,6 @@ config ARCH_QCOM if ARCH_QCOM -menu "Qualcomm SoC Selection" - config ARCH_MSM8X60 bool "Enable support for MSM8X60" select CLKSRC_QCOM @@ -25,8 +23,6 @@ config ARCH_MSM8974 bool "Enable support for MSM8974" select HAVE_ARM_ARCH_TIMER -endmenu - config QCOM_SCM bool diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 270e5caf3c97..798073057e51 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -1,7 +1,7 @@ config ARCH_SHMOBILE bool -config ARCH_SHMOBILE_MULTI +menuconfig ARCH_SHMOBILE_MULTI bool "Renesas ARM SoCs" if ARCH_MULTI_V7 depends on MMU select ARCH_SHMOBILE @@ -15,7 +15,7 @@ config ARCH_SHMOBILE_MULTI if ARCH_SHMOBILE_MULTI -comment "Renesas ARM SoCs System Type" +#comment "Renesas ARM SoCs System Type" config ARCH_EMEV2 bool "Emma Mobile EV2" diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index abf9ee9bbc3f..7e33e9d2c42e 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -1,5 +1,5 @@ menuconfig ARCH_STI - bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7 + bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7 select ARM_GIC select ARM_GLOBAL_TIMER select PINCTRL diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 8981ed49787d..095399618ca5 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -1,4 +1,4 @@ -config ARCH_TEGRA +menuconfig ARCH_TEGRA bool "NVIDIA Tegra" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS @@ -15,8 +15,7 @@ config ARCH_TEGRA help This enables support for NVIDIA Tegra based systems. -menu "NVIDIA Tegra options" - depends on ARCH_TEGRA +if ARCH_TEGRA config ARCH_TEGRA_2x_SOC bool "Enable support for Tegra20 family" @@ -68,4 +67,4 @@ config TEGRA_AHB which controls AHB bus master arbitration and some performance parameters(priority, prefech size). -endmenu +endif diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index e3a96d7302e9..bc51a71394af 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,4 +1,4 @@ -config ARCH_U300 +menuconfig ARCH_U300 bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5 depends on MMU select ARCH_REQUIRE_GPIOLIB @@ -16,8 +16,6 @@ config ARCH_U300 if ARCH_U300 -menu "ST-Ericsson AB U300/U335 Platform" - config MACH_U300 depends on ARCH_U300 bool "U300" @@ -43,6 +41,4 @@ config MACH_U300_SPIDUMMY you don't need it. Selecting this will activate the SPI framework and ARM PL022 support. -endmenu - endif diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 9b93144c1c2b..5be7c4583a93 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -1,4 +1,4 @@ -config ARCH_U8500 +menuconfig ARCH_U8500 bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7 depends on MMU select AB8500_CORE @@ -33,8 +33,6 @@ config UX500_SOC_DB8500 select REGULATOR select REGULATOR_DB8500_PRCMU -menu "Ux500 target platform (boards)" - config MACH_MOP500 bool "U8500 Development platform, MOP500 versions" select I2C @@ -67,8 +65,6 @@ config UX500_AUTO_PLATFORM a working kernel. If everything else is disabled, this automatically enables MACH_MOP500. -endmenu - config UX500_DEBUG_UART int "Ux500 UART to use for low-level debug" default 2 diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 2e2e8bbb88d7..99c1f151c403 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,4 +1,4 @@ -config ARCH_VEXPRESS +menuconfig ARCH_VEXPRESS bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_BIG_ENDIAN @@ -37,8 +37,7 @@ config ARCH_VEXPRESS platforms. The traditional (ATAGs) boot method is not usable on these boards with this option. -menu "Versatile Express platform type" - depends on ARCH_VEXPRESS +if ARCH_VEXPRESS config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA bool "Enable A5 and A9 only errata work-arounds" @@ -82,4 +81,4 @@ config ARCH_VEXPRESS_TC2_PM Support for CPU and cluster power management on Versatile Express with a TC2 (A15x2 A7x3) big.LITTLE core tile. -endmenu +endif -- cgit v1.2.3 From c0c3c3590d0d178cd461f0c29aca0e83294c4bc4 Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Wed, 18 Jun 2014 08:08:49 +0900 Subject: ARM: EXYNOS: fix pm code to check for cortex A9 rather than the SoC We have an soc check to ensure that the scu and certain A9 specific registers are not accessed on Exynos5250 (which is A15 based). Rather than adding another soc specific check for 5420 let us test for the Cortex A9 primary part number. This resolves the below crash seen on exynos5420 during core switching after the CPUIdle consolidation series was merged. [ 155.975589] [] (scu_enable) from [] (exynos_cpu_pm_notifier+0x80/0xc4) [ 155.983833] [] (exynos_cpu_pm_notifier) from [] (notifier_call_chain+0x44/0x84) [ 155.992851] [] (notifier_call_chain) from [] (cpu_pm_notify+0x20/0x3c) [ 156.001089] [] (cpu_pm_notify) from [] (cpu_pm_exit+0x20/0x38) [ 156.008635] [] (cpu_pm_exit) from [] (bL_switcher_thread+0x298/0x40c) [ 156.016788] [] (bL_switcher_thread) from [] (kthread+0xcc/0xe8) [ 156.024426] [] (kthread) from [] (ret_from_fork+0x14/0x3c) [ 156.031621] Code: ea017fec c0530a00 c052e3f8 c0012dcc (e5903000 Signed-off-by: Abhilash Kesavan Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/pm.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 87c0d34c7fba..202ca73e49c4 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -300,7 +300,7 @@ static int exynos_pm_suspend(void) tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); - if (!soc_is_exynos5250()) + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) exynos_cpu_save_register(); return 0; @@ -334,7 +334,7 @@ static void exynos_pm_resume(void) if (exynos_pm_central_resume()) goto early_wakeup; - if (!soc_is_exynos5250()) + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) exynos_cpu_restore_register(); /* For release retention */ @@ -353,7 +353,7 @@ static void exynos_pm_resume(void) s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (!soc_is_exynos5250()) + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) scu_enable(S5P_VA_SCU); early_wakeup: @@ -440,15 +440,18 @@ static int exynos_cpu_pm_notifier(struct notifier_block *self, case CPU_PM_ENTER: if (cpu == 0) { exynos_pm_central_suspend(); - exynos_cpu_save_register(); + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) + exynos_cpu_save_register(); } break; case CPU_PM_EXIT: if (cpu == 0) { - if (!soc_is_exynos5250()) + if (read_cpuid_part_number() == + ARM_CPU_PART_CORTEX_A9) { scu_enable(S5P_VA_SCU); - exynos_cpu_restore_register(); + exynos_cpu_restore_register(); + } exynos_pm_central_resume(); } break; -- cgit v1.2.3 From 1712ef43af71b0a0498ad370f0829d6b85fa2dca Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 16 Jun 2014 15:25:29 +0100 Subject: arm/ftrace: fix ftrace_return_addr() to ftrace_return_address() The clean up of CALLER_ADDR*() functions required the archs to either use the default __builtin_return_address(X) (where X > 0) or override it with something the arch can use. To override it, the arch would define ftrace_return_address(x). The arm architecture requires this to be redefined but instead of defining ftrace_return_address(x) it defined ftrace_return_addr(x). Fixes: eed542d6962b (ftrace: Make CALLER_ADDRx macros more generic) Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Signed-off-by: Steven Rostedt Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm/include/asm/ftrace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index eb577f4f5f70..39eb16b0066f 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -52,7 +52,7 @@ extern inline void *return_address(unsigned int level) #endif -#define ftrace_return_addr(n) return_address(n) +#define ftrace_return_address(n) return_address(n) #endif /* ifndef __ASSEMBLY__ */ -- cgit v1.2.3 From 3f620ddc0dde30fe88be4cc80ae9ebda8bd37448 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Tue, 17 Jun 2014 20:08:56 -0300 Subject: ARM: mvebu: enable Dove SoC in mvebu_v7_defconfig Since commit: commit d93003e8e4e1fbbc8a06ec561a63f5aa105a4c45 Author: Sebastian Hesselbarth Date: Thu Apr 24 22:58:30 2014 +0100 ARM: 8042/1: iwmmxt: allow to build iWMMXt on Marvell PJ4B fixed the error that prevented Dove SoC from being built with the rest of the mvebu SoCs, we can now add it to the defconfig. In addition, this commit enables SERIAL_OF_PLATFORM, which is required to have UART on some of the boards. Signed-off-by: Ezequiel Garcia Signed-off-by: Arnd Bergmann --- arch/arm/configs/mvebu_v7_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index e11170e37442..b0bfefa23902 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -14,6 +14,7 @@ CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y CONFIG_MACH_ARMADA_38X=y CONFIG_MACH_ARMADA_XP=y +CONFIG_MACH_DOVE=y CONFIG_NEON=y # CONFIG_CACHE_L2X0 is not set # CONFIG_SWP_EMULATE is not set @@ -52,6 +53,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C=y CONFIG_SPI=y CONFIG_SPI_ORION=y -- cgit v1.2.3 From 88a1c67ff6e6fe5d8391cd87ea89744a5f2728a4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 18 Jun 2014 11:30:17 +0100 Subject: ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts Two reasons for this rename. Firstly, it removes the camel case convention which isn't used by any other platform and secondly it matches the naming convention for the internal kernel, which can become annoying when flipping between the two. Signed-off-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/Makefile | 2 +- arch/arm/boot/dts/stih416-b2020-revE.dts | 35 -------------------------------- arch/arm/boot/dts/stih416-b2020e.dts | 35 ++++++++++++++++++++++++++++++++ 3 files changed, 36 insertions(+), 36 deletions(-) delete mode 100644 arch/arm/boot/dts/stih416-b2020-revE.dts create mode 100644 arch/arm/boot/dts/stih416-b2020e.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5986ff63b901..adb5ed9e269e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -357,7 +357,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \ stih415-b2020.dtb \ stih416-b2000.dtb \ stih416-b2020.dtb \ - stih416-b2020-revE.dtb + stih416-b2020e.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-cubieboard.dtb \ diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts deleted file mode 100644 index ba0fa2caaf18..000000000000 --- a/arch/arm/boot/dts/stih416-b2020-revE.dts +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2014 STMicroelectronics (R&D) Limited. - * Author: Lee Jones - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/dts-v1/; -#include "stih416.dtsi" -#include "stih41x-b2020.dtsi" -/ { - model = "STiH416 B2020 REV-E"; - compatible = "st,stih416-b2020", "st,stih416"; - - soc { - leds { - compatible = "gpio-leds"; - red { - #gpio-cells = <1>; - label = "Front Panel LED"; - gpios = <&PIO4 1>; - linux,default-trigger = "heartbeat"; - }; - green { - gpios = <&PIO1 3>; - default-state = "off"; - }; - }; - - ethernet1: dwmac@fef08000 { - snps,reset-gpio = <&PIO0 7>; - }; - }; -}; diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts new file mode 100644 index 000000000000..ba0fa2caaf18 --- /dev/null +++ b/arch/arm/boot/dts/stih416-b2020e.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2014 STMicroelectronics (R&D) Limited. + * Author: Lee Jones + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +/dts-v1/; +#include "stih416.dtsi" +#include "stih41x-b2020.dtsi" +/ { + model = "STiH416 B2020 REV-E"; + compatible = "st,stih416-b2020", "st,stih416"; + + soc { + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <1>; + label = "Front Panel LED"; + gpios = <&PIO4 1>; + linux,default-trigger = "heartbeat"; + }; + green { + gpios = <&PIO1 3>; + default-state = "off"; + }; + }; + + ethernet1: dwmac@fef08000 { + snps,reset-gpio = <&PIO0 7>; + }; + }; +}; -- cgit v1.2.3 From a641f3a6abce7e884d15adf073599bb2f2651203 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jun 2014 10:19:10 +0100 Subject: ARM: l2c: fix dependencies on PL310 errata symbols A number of configurations spit out warnings similar to: warning: (SOC_IMX6 && SOC_VF610 && ARCH_OMAP4) selects PL310_ERRATA_588369 which has unmet direct dependencies (CACHE_L2X0) warning: (SOC_IMX6 && SOC_VF610 && ARCH_OMAP4) selects PL310_ERRATA_727915 which has unmet direct dependencies (CACHE_L2X0) Clean up the dependencies here: * PL310 symbols should only be selected when CACHE_L2X0 is enabled. * Since the cache-l2x0 code detects PL310 presence at runtime, and we will eventually get rid of CACHE_PL310, surround these errata options with an if CACHE_L2X0 conditional rather than repeating the dependency against each. Acked-by: Arnd Bergmann Signed-off-by: Russell King --- arch/arm/mach-imx/Kconfig | 12 ++++++------ arch/arm/mach-omap2/Kconfig | 4 ++-- arch/arm/mach-sti/Kconfig | 4 ++-- arch/arm/mach-ux500/Kconfig | 2 +- arch/arm/mach-vexpress/Kconfig | 2 +- arch/arm/mm/Kconfig | 9 ++++----- 6 files changed, 16 insertions(+), 17 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 8d42eab76d53..606b52680f6a 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -738,9 +738,9 @@ config SOC_IMX6 select HAVE_IMX_MMDC select HAVE_IMX_SRC select MFD_SYSCON - select PL310_ERRATA_588369 if CACHE_PL310 - select PL310_ERRATA_727915 if CACHE_PL310 - select PL310_ERRATA_769419 if CACHE_PL310 + select PL310_ERRATA_588369 if CACHE_L2X0 + select PL310_ERRATA_727915 if CACHE_L2X0 + select PL310_ERRATA_769419 if CACHE_L2X0 config SOC_IMX6Q bool "i.MX6 Quad/DualLite support" @@ -775,9 +775,9 @@ config SOC_VF610 select ARM_GIC select PINCTRL_VF610 select VF_PIT_TIMER - select PL310_ERRATA_588369 if CACHE_PL310 - select PL310_ERRATA_727915 if CACHE_PL310 - select PL310_ERRATA_769419 if CACHE_PL310 + select PL310_ERRATA_588369 if CACHE_L2X0 + select PL310_ERRATA_727915 if CACHE_L2X0 + select PL310_ERRATA_769419 if CACHE_L2X0 help This enable support for Freescale Vybrid VF610 processor. diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 0ba482638ebf..2ff3f23e31b0 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -32,8 +32,8 @@ config ARCH_OMAP4 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select OMAP_INTERCONNECT - select PL310_ERRATA_588369 - select PL310_ERRATA_727915 + select PL310_ERRATA_588369 if CACHE_L2X0 + select PL310_ERRATA_727915 if CACHE_L2X0 select PM_OPP if PM select PM_RUNTIME if CPU_IDLE select ARM_ERRATA_754322 diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index abf9ee9bbc3f..1831e9611761 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -11,8 +11,8 @@ menuconfig ARCH_STI select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 - select PL310_ERRATA_753970 if CACHE_PL310 - select PL310_ERRATA_769419 if CACHE_PL310 + select PL310_ERRATA_753970 if CACHE_L2X0 + select PL310_ERRATA_769419 if CACHE_L2X0 help Include support for STiH41x SOCs like STiH415/416 using the device tree for discovery diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index b41a42da1505..86f537277383 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -16,7 +16,7 @@ config ARCH_U8500 select PINCTRL select PINCTRL_ABX500 select PINCTRL_NOMADIK - select PL310_ERRATA_753970 if CACHE_PL310 + select PL310_ERRATA_753970 if CACHE_L2X0 help Support for ST-Ericsson's Ux500 architecture diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 90249cfc37b3..a423de4724ab 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -44,7 +44,7 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA bool "Enable A5 and A9 only errata work-arounds" default y select ARM_ERRATA_720789 - select PL310_ERRATA_753970 if CACHE_PL310 + select PL310_ERRATA_753970 if CACHE_L2X0 help Provides common dependencies for Versatile Express platforms based on Cortex-A5 and Cortex-A9 processors. In order to diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index eda0dd0ab97b..c348eaee7ee2 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -889,9 +889,10 @@ config CACHE_L2X0 help This option enables the L2x0 PrimeCell. +if CACHE_L2X0 + config CACHE_PL310 bool - depends on CACHE_L2X0 default y if CPU_V7 && !(CPU_V6 || CPU_V6K) help This option enables optimisations for the PL310 cache @@ -899,7 +900,6 @@ config CACHE_PL310 config PL310_ERRATA_588369 bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" - depends on CACHE_L2X0 help The PL310 L2 cache controller implements three types of Clean & Invalidate maintenance operations: by Physical Address @@ -912,7 +912,6 @@ config PL310_ERRATA_588369 config PL310_ERRATA_727915 bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" - depends on CACHE_L2X0 help PL310 implements the Clean & Invalidate by Way L2 cache maintenance operation (offset 0x7FC). This operation runs in background so that @@ -923,7 +922,6 @@ config PL310_ERRATA_727915 config PL310_ERRATA_753970 bool "PL310 errata: cache sync operation may be faulty" - depends on CACHE_PL310 help This option enables the workaround for the 753970 PL310 (r3p0) erratum. @@ -938,7 +936,6 @@ config PL310_ERRATA_753970 config PL310_ERRATA_769419 bool "PL310 errata: no automatic Store Buffer drain" - depends on CACHE_L2X0 help On revisions of the PL310 prior to r3p2, the Store Buffer does not automatically drain. This can cause normal, non-cacheable @@ -948,6 +945,8 @@ config PL310_ERRATA_769419 on systems with an outer cache, the store buffer is drained explicitly. +endif + config CACHE_TAUROS2 bool "Enable the Tauros2 L2 cache controller" depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4) -- cgit v1.2.3 From 6a78371acebfe1e9d9eda218a835d712193d35a5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jun 2014 10:39:41 +0100 Subject: ARM: perf: fix compiler warning with gcc 4.6.4 (and tidy code) GCC 4.6.4 spits out the following warning when building perf_event_v7.c: arch/arm/kernel/perf_event_v7.c: In function 'krait_pmu_get_event_idx': arch/arm/kernel/perf_event_v7.c:1927:6: warning: 'bit' may be used uninitialized in this function While upgrading the version of gcc may solve this, the code can also be organised to be more efficient by not carrying more local variables than is necessary across the armv7pmu_get_event_idx function call. If we set 'bit' to -1 (which is invalid for clear_bit) we can use that as an indication whether we need to clear a bit after this function. Acked-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/perf_event_v7.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 2037f7205987..1d37568c547a 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -1924,7 +1924,7 @@ static int krait_pmu_get_event_idx(struct pmu_hw_events *cpuc, struct perf_event *event) { int idx; - int bit; + int bit = -1; unsigned int prefix; unsigned int region; unsigned int code; @@ -1953,7 +1953,7 @@ static int krait_pmu_get_event_idx(struct pmu_hw_events *cpuc, } idx = armv7pmu_get_event_idx(cpuc, event); - if (idx < 0 && krait_event) + if (idx < 0 && bit >= 0) clear_bit(bit, cpuc->used_mask); return idx; -- cgit v1.2.3 From 6d43925f5a21e0cfdb59714f7b78a8d278cf2357 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 18 Jun 2014 09:52:22 +0100 Subject: ARM: multi_v7_defconfig: Add QCOM GSBI driver This patch adds QCOM GSBI config option to multi_v7_defconfig. Serial driver on QCOM APQ8064 depends on GSBI driver, so without this patch there is no serial console on IF6410 board using multi_v7_defconfig. Signed-off-by: Srinivas Kandagatla Signed-off-by: Arnd Bergmann --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 17d9462b9fb9..be1a3455a9fe 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -353,6 +353,7 @@ CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y +CONFIG_QCOM_GSBI=y CONFIG_COMMON_CLK_QCOM=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y -- cgit v1.2.3 From b8d8772e53f83cc87aeeab1c3a60d5d5d45ce38b Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Jun 2014 11:23:02 +0100 Subject: ARM: arm925: ensure assembly sets up writethrough mapping Commit ca8f0b0a545f ("ARM: ensure C page table setup code follows assembly code") did what it said on the tin, but some of the older CPU code omitted the default cache policy from their files. This results in the kernel running with the caches disabled. Fix this for ARM925. Reported-by: Aaro Koskinen Signed-off-by: Russell King --- arch/arm/mm/proc-arm925.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 97448c3acf38..ba0d58e1a2a2 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -502,6 +502,7 @@ __\name\()_proc_info: .long \cpu_val .long \cpu_mask .long PMD_TYPE_SECT | \ + PMD_SECT_CACHEABLE | \ PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ -- cgit v1.2.3 From 8f95da90e9ac2abf38a40cd33c980d7d09b3278b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 20 Jun 2014 00:02:24 -0300 Subject: ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_CORE Since commit 39b9004d1f (gpu: ipu-v3: Move i.MX IPUv3 core driver out of staging) the ipuv3 core driver is no longer built bey default. Select CONFIG_IMX_IPUV3_CORE so that the core ipuv3 code can be built again. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index ef8815327e5b..59b7e45142d8 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -186,6 +186,7 @@ CONFIG_VIDEO_MX3=y CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_CODA=y CONFIG_SOC_CAMERA_OV2640=y +CONFIG_IMX_IPUV3_CORE=y CONFIG_DRM=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_BACKLIGHT_LCD_SUPPORT=y -- cgit v1.2.3 From ed2d859119f9cb04410d94b5fbd2bb12907c8932 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Mon, 9 Jun 2014 17:52:45 -0300 Subject: ARM: mvebu: Fix broken SoC ID detection Currently the mvebu boards need to detect the SoC revision in order to apply some quirks needed to workaround issues found on I2C and thermal controllers present only in very early SoC. This detection requires PCI address translation to work, so we need to explicitly select OF_ADDRESS_PCI. This can be considered a partial revert of the following commit, that wrongly removed the option selection: commit 55400f3a1f89e39761f45c19f6e4235a329c400b Author: Rob Herring Date: Tue Apr 22 14:15:52 2014 -0500 ARM: mvebu: clean-up unneeded kconfig selects Signed-off-by: Ezequiel Garcia Link: https://lkml.kernel.org/r/1402347165-19988-1-git-send-email-ezequiel.garcia@free-electrons.com Acked-by: Rob Herring Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 6090b9eb00c8..61ac80a8acac 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -10,6 +10,7 @@ config ARCH_MVEBU select ZONE_DMA if ARM_LPAE select ARCH_REQUIRE_GPIOLIB select PCI_QUIRKS if PCI + select OF_ADDRESS_PCI if ARCH_MVEBU -- cgit v1.2.3 From 52fcc56753de91ae337aeaa0a664f72d93f19827 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 11 Jun 2014 14:06:37 +0200 Subject: ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platforms On Marvell Armada platforms, the PMSU (Power Management Service Unit) controls a number of power management related activities, needed for things like suspend/resume, CPU hotplug, cpuidle or even simply SMP. Since cpuidle support was added for Armada XP, the pmsu.c file in arch/arm/mach-mvebu/ calls the cpu_suspend() and cpu_resume() ARM functions, which are only available when CONFIG_ARM_CPU_SUSPEND=y. Therefore, configurations that have CONFIG_ARM_CPU_SUSPEND disabled due to PM_SLEEP being disabled no longer build properly, due to undefined references to cpu_suspend() and cpu_resume(). To fix this, this patch simply ensures CONFIG_ARM_CPU_SUSPEND is always enabled for Marvell EBU v7 platforms. Doing things in a more fine-grained way would require a lot of #ifdef-ery in pmsu.c to isolate the parts that use cpu_suspend()/cpu_resume(), and those parts would anyway have been needed as soon as either one of suspend/resume, CPU hotplug or cpuidle was enabled. Reported-by: Ezequiel Garcia Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1402488397-31381-1-git-send-email-thomas.petazzoni@free-electrons.com Acked-by: Ezequiel Garcia Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 61ac80a8acac..ea039ed7a3ae 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -20,6 +20,7 @@ config MACH_MVEBU_V7 bool select ARMADA_370_XP_TIMER select CACHE_L2X0 + select ARM_CPU_SUSPEND config MACH_ARMADA_370 bool "Marvell Armada 370 boards" if ARCH_MULTI_V7 -- cgit v1.2.3 From cbb6c3fe33f94d59c1fb276af00056020bdfd874 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 13 Jun 2014 02:22:39 +0200 Subject: ARM: dts: mx5: Fix IPU port node placement The "port" node was misplaced in the original patch, therefore making the LCD dysfunctional on this board. Fix this by moving the "port" DT node into the "display {}" node. Signed-off-by: Marek Vasut Acked-by: Philipp Zabel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-m53evk.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index d5d146a8b149..3a04b9eba231 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -43,11 +43,11 @@ vsync-active = <1>; }; }; - }; - port { - display1_in: endpoint { - remote-endpoint = <&ipu_di1_disp1>; + port { + display1_in: endpoint { + remote-endpoint = <&ipu_di1_disp1>; + }; }; }; }; -- cgit v1.2.3 From be149c75fc50961675a6969c72cb0dc38116a0b9 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 13 Jun 2014 02:22:40 +0200 Subject: ARM: dts: mx5: Move the display out of soc {} node Move the display {} node out of the soc {} node . This just aligns the DT with other boards, there is no functional change. Signed-off-by: Marek Vasut Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-m53evk.dts | 48 ++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 25 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index 3a04b9eba231..c4956b0ffb35 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -21,33 +21,31 @@ <0xb0000000 0x20000000>; }; - soc { - display1: display@di1 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "bgr666"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp1>; - - display-timings { - 800x480p60 { - native-mode; - clock-frequency = <31500000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <88>; - hsync-len = <128>; - vback-porch = <33>; - vfront-porch = <9>; - vsync-len = <3>; - vsync-active = <1>; - }; + display1: display@di1 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1>; + + display-timings { + 800x480p60 { + native-mode; + clock-frequency = <31500000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <128>; + vback-porch = <33>; + vfront-porch = <9>; + vsync-len = <3>; + vsync-active = <1>; }; + }; - port { - display1_in: endpoint { - remote-endpoint = <&ipu_di1_disp1>; - }; + port { + display1_in: endpoint { + remote-endpoint = <&ipu_di1_disp1>; }; }; }; -- cgit v1.2.3 From dacf49223fc680e6d5b5ca4ea43dcd197c1814c5 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 23 May 2014 14:33:04 +0200 Subject: ARM: dts: imx51-babbage: Fix esdhc setup Since commit 89d7e5c13122 (mmc: sdhci-esdhc-imx: add runtime pm support), controller based card detection / write protection is not supported anymore by esdhc driver. Let's use GPIO for CD/WP on esdhc1 instead. While at it, fix cd gpio polarity for esdhc2. This is wrong and currently only works because the imx esdhc driver ignores the polarity. Signed-off-by: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-babbage.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 6bc3243a80d3..181d77fa2fa6 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -315,15 +315,15 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - fsl,cd-controller; - fsl,wp-controller; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -468,8 +468,8 @@ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 - MX51_PAD_GPIO1_1__SD1_WP 0x20d5 + MX51_PAD_GPIO1_0__GPIO1_0 0x100 + MX51_PAD_GPIO1_1__GPIO1_1 0x100 >; }; -- cgit v1.2.3 From 7d278f271c082530e6841e40bb47942d526d9b4e Mon Sep 17 00:00:00 2001 From: Denis Carikli Date: Wed, 18 Jun 2014 14:56:56 +0200 Subject: ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc. The following commit: 89d7e5c mmc: sdhci-esdhc-imx: add runtime pm support has the effect of also disabling the hardware card detect in runtime pm. We switch to GPIO based detection to avoid this issue. This patch is based on: ARM: dts: imx51-babbage: Fix esdhc setup Signed-off-by: Denis Carikli Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 75e66c9c6144..31cfb7f2b02e 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -107,7 +107,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>; - fsl,cd-controller; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -206,7 +206,7 @@ pinctrl_esdhc1_cd: esdhc1_cd { fsl,pins = < - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 + MX51_PAD_GPIO1_0__GPIO1_0 0xd5 >; }; -- cgit v1.2.3 From 7cbcb9d46f9194eb1f88c253a08c0292b2883acc Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Sat, 21 Jun 2014 19:30:53 +0900 Subject: ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpm On exynos mcpm systems the firmware is hardcoded to jump to an address in SRAM (0x02073000) when secondary CPUs come up. By default the firmware puts a bunch of code at that location. That code expects the kernel to fill in a few slots with addresses that it uses to jump back to the kernel's entry point for secondary CPUs. Originally (on prerelease hardware) this firmware code contained a bunch of workarounds to deal with boot ROM bugs. However on all shipped hardware we simply use this code to redirect to a kernel function for bringing up the CPUs. Let's stop relying on the code provided by the bootloader and just plumb in our own (simple) code jump to the kernel. This has the nice benefit of fixing problems due to the fact that older bootloaders (like the one shipped on the Samsung Chromebook 2) might have put slightly different code into this location. Once suspend/resume is implemented for systems using exynos-mcpm we'll need to make sure we reinstall our fixed up code after resume. ...but that's not anything new since IRAM (and thus the address of the mcpm_entry_point) is lost across suspend/resume anyway. Signed-off-by: Doug Anderson Acked-by: Kevin Hilman Tested-by: Kevin Hilman Acked-by: Nicolas Pitre Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mcpm-exynos.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index 0498d0b887ef..ace0ed617476 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -25,7 +25,6 @@ #define EXYNOS5420_CPUS_PER_CLUSTER 4 #define EXYNOS5420_NR_CLUSTERS 2 -#define MCPM_BOOT_ADDR_OFFSET 0x1c /* * The common v7_exit_coherency_flush API could not be used because of the @@ -343,11 +342,13 @@ static int __init exynos_mcpm_init(void) pr_info("Exynos MCPM support installed\n"); /* - * Future entries into the kernel can now go - * through the cluster entry vectors. + * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr + * as part of secondary_cpu_start(). Let's redirect it to the + * mcpm_entry_point(). */ - __raw_writel(virt_to_phys(mcpm_entry_point), - ns_sram_base_addr + MCPM_BOOT_ADDR_OFFSET); + __raw_writel(0xe59f0000, ns_sram_base_addr); /* ldr r0, [pc, #0] */ + __raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx r0 */ + __raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 8); iounmap(ns_sram_base_addr); -- cgit v1.2.3 From b514fb28ead93332a1660d3ce81def9eb74ed640 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Mon, 23 Jun 2014 22:25:15 +0200 Subject: ARM: dts: kirkwood: fix phy-connection-type for Guruplug Commit eeb845459a72e792a959278b858f9c417e9995bd ("ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id") added phy-connection-type properties to ethernet PHY nodes. Actually, the property has to be set for the ethernet port node instead. Fix it by moving the corresponding properties to the correct nodes. Signed-off-by: Sebastian Hesselbarth Link: https://lkml.kernel.org/r/1403555115-13111-1-git-send-email-sebastian.hesselbarth@gmail.com Fixes: eeb845459a72: ('ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id') Cc: # v3.16+ Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index c5a1fc75c7a3..b2d9834bf458 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -105,7 +105,6 @@ compatible = "ethernet-phy-id0141.0cb0", "ethernet-phy-ieee802.3-c22"; reg = <0>; - phy-connection-type = "rgmii-id"; }; ethphy1: ethernet-phy@1 { @@ -113,7 +112,6 @@ compatible = "ethernet-phy-id0141.0cb0", "ethernet-phy-ieee802.3-c22"; reg = <1>; - phy-connection-type = "rgmii-id"; }; }; @@ -121,6 +119,7 @@ status = "okay"; ethernet0-port@0 { phy-handle = <ðphy0>; + phy-connection-type = "rgmii-id"; }; }; @@ -128,5 +127,6 @@ status = "okay"; ethernet1-port@0 { phy-handle = <ðphy1>; + phy-connection-type = "rgmii-id"; }; }; -- cgit v1.2.3 From 8dbdb8e704db34085f5978c335c10256b0fb9629 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 23 Jun 2014 16:16:51 +0200 Subject: ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard Wildcards in compatible strings should be avoid. "marvell,armada38x" was recently introduced but was not yet used. The armada 385 SoC is a superset of the armada 380 SoC (with more CPUs and more PCIe slots). So this patch replaces the use of "marvell,armada38x" by the "marvell,armada380" string. Signed-off-by: Gregory CLEMENT Link: https://lkml.kernel.org/r/1403533011-21339-1-git-send-email-gregory.clement@free-electrons.com Acked-by: Andrew Lunn Cc: # v3.15+ Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-380.dtsi | 2 +- arch/arm/boot/dts/armada-385-db.dts | 2 +- arch/arm/boot/dts/armada-385-rd.dts | 2 +- arch/arm/boot/dts/armada-385.dtsi | 2 +- arch/arm/boot/dts/armada-38x.dtsi | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index e69bc6759c39..4173a8ab34e7 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -16,7 +16,7 @@ / { model = "Marvell Armada 380 family SoC"; - compatible = "marvell,armada380", "marvell,armada38x"; + compatible = "marvell,armada380"; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts index ff9637dd8d0f..4be6a2838a41 100644 --- a/arch/arm/boot/dts/armada-385-db.dts +++ b/arch/arm/boot/dts/armada-385-db.dts @@ -16,7 +16,7 @@ / { model = "Marvell Armada 385 Development Board"; - compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada38x"; + compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts index 40893255a3f0..aaca2861dc87 100644 --- a/arch/arm/boot/dts/armada-385-rd.dts +++ b/arch/arm/boot/dts/armada-385-rd.dts @@ -17,7 +17,7 @@ / { model = "Marvell Armada 385 Reference Design"; - compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada38x"; + compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index f011009bf4cf..6283d7912f71 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -16,7 +16,7 @@ / { model = "Marvell Armada 385 family SoC"; - compatible = "marvell,armada385", "marvell,armada38x"; + compatible = "marvell,armada385", "marvell,armada380"; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 3de364e81b52..689fa1a46728 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -20,7 +20,7 @@ / { model = "Marvell Armada 38x family SoC"; - compatible = "marvell,armada38x"; + compatible = "marvell,armada380"; aliases { gpio0 = &gpio0; -- cgit v1.2.3 From 11f9323a48875101bc4de6077155c17aed82cfc8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 24 Jun 2014 14:08:07 +0200 Subject: ARM: integrator: fix OF-related regression Commit 07e461cd7e73a84f0e3757932b93cc80976fd749 "of: Ensure unique names without sacrificing determinism" caused a boot failure regression on the Integrator machines. The problem is probably caused by fiddling too much with the device tree population in the OF init function, such as passing the SoC bus device as parent when populating the device tree. This patch fixes the problem by: - Avoiding to explicitly look up the tree root - Look up devices needed before device population from the match only, passing NULL as root - Passing NULL as root and parent when calling of_platform_populate() After this the Integrators boot again. Tested on Integrator/AP and Integrator/CP. Cc: Grant Likely Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- arch/arm/mach-integrator/integrator_ap.c | 26 +++++++------------------- arch/arm/mach-integrator/integrator_cp.c | 23 ++++++----------------- 2 files changed, 13 insertions(+), 36 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index dd0cc677d596..660ca6feff40 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -480,25 +480,18 @@ static const struct of_device_id ebi_match[] = { static void __init ap_init_of(void) { unsigned long sc_dec; - struct device_node *root; struct device_node *syscon; struct device_node *ebi; struct device *parent; struct soc_device *soc_dev; struct soc_device_attribute *soc_dev_attr; u32 ap_sc_id; - int err; int i; - /* Here we create an SoC device for the root node */ - root = of_find_node_by_path("/"); - if (!root) - return; - - syscon = of_find_matching_node(root, ap_syscon_match); + syscon = of_find_matching_node(NULL, ap_syscon_match); if (!syscon) return; - ebi = of_find_matching_node(root, ebi_match); + ebi = of_find_matching_node(NULL, ebi_match); if (!ebi) return; @@ -509,19 +502,17 @@ static void __init ap_init_of(void) if (!ebi_base) return; + of_platform_populate(NULL, of_default_bus_match_table, + ap_auxdata_lookup, NULL); + ap_sc_id = readl(ap_syscon_base); soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) return; - err = of_property_read_string(root, "compatible", - &soc_dev_attr->soc_id); - if (err) - return; - err = of_property_read_string(root, "model", &soc_dev_attr->machine); - if (err) - return; + soc_dev_attr->soc_id = "XVC"; + soc_dev_attr->machine = "Integrator/AP"; soc_dev_attr->family = "Integrator"; soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c", 'A' + (ap_sc_id & 0x0f)); @@ -536,9 +527,6 @@ static void __init ap_init_of(void) parent = soc_device_to_device(soc_dev); integrator_init_sysfs(parent, ap_sc_id); - of_platform_populate(root, of_default_bus_match_table, - ap_auxdata_lookup, parent); - sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { struct lm_device *lmdev; diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index a938242b0c95..0e57f8f820a5 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -279,20 +279,13 @@ static const struct of_device_id intcp_syscon_match[] = { static void __init intcp_init_of(void) { - struct device_node *root; struct device_node *cpcon; struct device *parent; struct soc_device *soc_dev; struct soc_device_attribute *soc_dev_attr; u32 intcp_sc_id; - int err; - /* Here we create an SoC device for the root node */ - root = of_find_node_by_path("/"); - if (!root) - return; - - cpcon = of_find_matching_node(root, intcp_syscon_match); + cpcon = of_find_matching_node(NULL, intcp_syscon_match); if (!cpcon) return; @@ -300,19 +293,17 @@ static void __init intcp_init_of(void) if (!intcp_con_base) return; + of_platform_populate(NULL, of_default_bus_match_table, + intcp_auxdata_lookup, NULL); + intcp_sc_id = readl(intcp_con_base); soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) return; - err = of_property_read_string(root, "compatible", - &soc_dev_attr->soc_id); - if (err) - return; - err = of_property_read_string(root, "model", &soc_dev_attr->machine); - if (err) - return; + soc_dev_attr->soc_id = "XCV"; + soc_dev_attr->machine = "Integrator/CP"; soc_dev_attr->family = "Integrator"; soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c", 'A' + (intcp_sc_id & 0x0f)); @@ -326,8 +317,6 @@ static void __init intcp_init_of(void) parent = soc_device_to_device(soc_dev); integrator_init_sysfs(parent, intcp_sc_id); - of_platform_populate(root, of_default_bus_match_table, - intcp_auxdata_lookup, parent); } static const char * intcp_dt_board_compat[] = { -- cgit v1.2.3 From b6616f11a85af3868e5080ef38846a0cbc496ed9 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Jun 2014 13:25:34 +0200 Subject: ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values ICPLL can only take 0 or 1, it got mixed with OUT which can be in the [0-3] range. Signed-off-by: Alexandre Belloni Acked-by: Boris BREZILLON Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 1a57298636a5..d6133f497207 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -140,8 +140,8 @@ 595000000 650000000 3 0 545000000 600000000 0 1 495000000 555000000 1 1 - 445000000 500000000 1 2 - 400000000 450000000 1 3>; + 445000000 500000000 2 1 + 400000000 450000000 3 1>; }; plladiv: plladivck { -- cgit v1.2.3 From 8cbff69ca9d57ee53656d187f77774501794bf27 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Jun 2014 13:28:12 +0200 Subject: ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values ICPLL can only take 0 or 1, it got mixed with OUT which can be in the [0-3] range. Signed-off-by: Alexandre Belloni Acked-by: Boris BREZILLON Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9n12.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index d1b82e6635d5..287795985e32 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -132,8 +132,8 @@ <595000000 650000000 3 0>, <545000000 600000000 0 1>, <495000000 555000000 1 1>, - <445000000 500000000 1 2>, - <400000000 450000000 1 3>; + <445000000 500000000 2 1>, + <400000000 450000000 3 1>; }; plladiv: plladivck { -- cgit v1.2.3 From 5de4728450417380d2d49fcf88905218f1787510 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Jun 2014 14:02:29 +0200 Subject: ARM: at91/dt: sam9261: correctly define mainck mainck (CKGR_MCFR register) is actually using main_osc (CKGR_MOR register). Signed-off-by: Alexandre Belloni Acked-by: Boris BREZILLON Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9261.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index b309c1c6e848..9de312e9bb3e 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -581,13 +581,19 @@ clocks = <&slow_rc_osc &slow_xtal>; }; - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MOSCS>; clocks = <&main_xtal>; }; + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + clocks = <&main_osc>; + }; + plla: pllack { compatible = "atmel,at91rm9200-clk-pll"; #clock-cells = <0>; -- cgit v1.2.3 From 78ca2ec920214089cb2c085252536cd04af687ca Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Sat, 14 Jun 2014 02:10:43 +0200 Subject: ARM: at91/dt: define sam9261ek slow crystal frequency Define at91sam9261ek's slow crystal frequencies. Signed-off-by: Alexandre Belloni Acked-by: Boris BREZILLON Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9261ek.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index c6683ea8b743..aa35a7aec9a8 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -20,6 +20,10 @@ reg = <0x20000000 0x4000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + main_xtal { clock-frequency = <18432000>; }; -- cgit v1.2.3 From 971dc9ce106110745f246337f229013589354536 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Mon, 23 Jun 2014 08:51:41 +0200 Subject: ARM: at91/dt: sam9261: remove slow RC osc The at91sam9261 doesn't actually have a slow RC oscillator, remove it from the dtsi. Signed-off-by: Alexandre Belloni Acked-by: Boris BREZILLON Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9261.dtsi | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 9de312e9bb3e..04927db1d6bf 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -568,19 +568,6 @@ #size-cells = <0>; #interrupt-cells = <1>; - slow_rc_osc: slow_rc_osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9260-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_xtal>; - }; - main_osc: main_osc { compatible = "atmel,at91rm9200-clk-main-osc"; #clock-cells = <0>; @@ -621,7 +608,7 @@ compatible = "atmel,at91rm9200-clk-master"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; atmel,clk-output-range = <0 94000000>; atmel,clk-divisors = <1 2 4 0>; }; @@ -638,7 +625,7 @@ #address-cells = <1>; #size-cells = <0>; interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; prog0: prog0 { #clock-cells = <0>; -- cgit v1.2.3 From bfda90cbb8933aa280b22e8ae087e2a850a01288 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 26 Jun 2014 23:10:55 -0700 Subject: ARM: bcm: Fix bcm and multi_v7 defconfigs BCM (Kona/capri platform) has regressed in two ways on this release. First, bcm_defconfig no longer selected the appropriate MMC driver options due to changes in dependencies. Secondly, the new MFD and regulator drivers were not enabled on multi_v7_defconfig, so that caused the system to fail probing MMC there. Fix by enabling the new options as needed. Cc: Matt Porter Cc: Christian Daudt Signed-off-by: Olof Johansson --- arch/arm/configs/bcm_defconfig | 2 +- arch/arm/configs/multi_v7_defconfig | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 9d13dae99125..4bf72264b175 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -94,10 +94,10 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_TEST=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index be1a3455a9fe..534836497998 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -223,12 +223,12 @@ CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_SUN6I=y CONFIG_SENSORS_LM90=y CONFIG_THERMAL=y -CONFIG_DOVE_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MFD_AS3722=y +CONFIG_MFD_BCM590XX=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX8907=y @@ -240,6 +240,7 @@ CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_AS3722=y +CONFIG_REGULATOR_BCM590XX=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_PALMAS=y -- cgit v1.2.3 From 98ea2dba65932ffc456b6d7b11b8a0624e2f7b95 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 13 Jun 2014 10:58:38 +0100 Subject: ARM: 8076/1: mm: add support for HW coherent systems in PL310 cache When a PL310 cache is used on a system that provides hardware coherency, the outer cache sync operation is useless, and can be skipped. Moreover, on some systems, it is harmful as it causes deadlocks between the Marvell coherency mechanism, the Marvell PCIe controller and the Cortex-A9. To avoid this, this commit introduces a new Device Tree property 'arm,io-coherent' for the L2 cache controller node, valid only for the PL310 cache. It identifies the usage of the PL310 cache in an I/O coherent configuration. Internally, it makes the driver disable the outer cache sync operation. Note that technically speaking, a fully coherent system wouldn't require any of the other .outer_cache operations. However, in practice, when booting secondary CPUs, these are not yet coherent, and therefore a set of cache maintenance operations are necessary at this point. This explains why we keep the other .outer_cache operations and only ->sync is disabled. While in theory any write to a PL310 register could cause the deadlock, in practice, disabling ->sync is sufficient to workaround the deadlock, since the other cache maintenance operations are only used in very specific situations. Contrary to previous versions of this patch, this new version does not simply NULL-ify the ->sync member, because the l2c_init_data structures are now 'const' and therefore cannot be modified, which is a good thing. Therefore, this patch introduces a separate l2c_init_data instance, called of_l2c310_coherent_data. Signed-off-by: Thomas Petazzoni Signed-off-by: Russell King --- arch/arm/mm/cache-l2x0.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index efc5cabf70e0..076172b69422 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -1068,6 +1068,33 @@ static const struct l2c_init_data of_l2c310_data __initconst = { }, }; +/* + * This is a variant of the of_l2c310_data with .sync set to + * NULL. Outer sync operations are not needed when the system is I/O + * coherent, and potentially harmful in certain situations (PCIe/PL310 + * deadlock on Armada 375/38x due to hardware I/O coherency). The + * other operations are kept because they are infrequent (therefore do + * not cause the deadlock in practice) and needed for secondary CPU + * boot and other power management activities. + */ +static const struct l2c_init_data of_l2c310_coherent_data __initconst = { + .type = "L2C-310 Coherent", + .way_size_0 = SZ_8K, + .num_lock = 8, + .of_parse = l2c310_of_parse, + .enable = l2c310_enable, + .fixup = l2c310_fixup, + .save = l2c310_save, + .outer_cache = { + .inv_range = l2c210_inv_range, + .clean_range = l2c210_clean_range, + .flush_range = l2c210_flush_range, + .flush_all = l2c210_flush_all, + .disable = l2c310_disable, + .resume = l2c310_resume, + }, +}; + /* * Note that the end addresses passed to Linux primitives are * noninclusive, while the hardware cache range operations use @@ -1487,6 +1514,10 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data = of_match_node(l2x0_ids, np)->data; + if (of_device_is_compatible(np, "arm,pl310-cache") && + of_property_read_bool(np, "arm,io-coherent")) + data = &of_l2c310_coherent_data; + old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); if (old_aux != ((old_aux & aux_mask) | aux_val)) { pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n", -- cgit v1.2.3 From d0ba7cc02cc20a3ae6ad60b842c5e786f584bb47 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 19 Jun 2014 22:57:01 +0100 Subject: ARM: 8080/1: mcpm.h: remove unused variable declaration The sync_phys variable has been replaced by link time computation in mcpm_head.S before the code was submitted upstream. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/mcpm.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index d9702eb0b02b..94060adba174 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -208,8 +208,6 @@ struct sync_struct { struct mcpm_sync_struct clusters[MAX_NR_CLUSTERS]; }; -extern unsigned long sync_phys; /* physical address of *mcpm_sync */ - void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster); void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster); void __mcpm_outbound_leave_critical(unsigned int cluster, int state); -- cgit v1.2.3 From 92183103d87dfa929696187e4ed6be67f56a2f3a Mon Sep 17 00:00:00 2001 From: Andrea Adami Date: Wed, 25 Jun 2014 22:31:15 +0100 Subject: ARM: 8084/1: sa1100: collie: revert back to cfi_probe Reverts commit d26b17edafc45187c30cae134a5e5429d58ad676 ARM: sa1100: collie.c: fall back to jedec_probe flash detection Unfortunately the detection was challenged on the defective unit used for tests: one of the NOR chips did not respond to the CFI query. Moreover that bad device needed extra delays on erase-suspend/resume cycles. Tested personally on 3 different units and with feedback of two other users. Signed-off-by: Andrea Adami Signed-off-by: Russell King --- arch/arm/mach-sa1100/collie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index f9874ba60cc8..f26aeeab9e14 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -356,7 +356,7 @@ static void collie_flash_exit(void) } static struct flash_platform_data collie_flash_data = { - .map_name = "jedec_probe", + .map_name = "cfi_probe", .init = collie_flash_init, .set_vpp = collie_set_vpp, .exit = collie_flash_exit, -- cgit v1.2.3 From 3abe742339567ac5d63c520834826aacd9b5d5f6 Mon Sep 17 00:00:00 2001 From: Andrea Adami Date: Wed, 25 Jun 2014 22:32:26 +0100 Subject: ARM: 8085/1: sa1100: collie: add top boot mtd partition The CFI mapping is now perfect so we can expose the top block, read only. There isn't much to read, though, just the sharpsl_params values. Signed-off-by: Andrea Adami Signed-off-by: Russell King --- arch/arm/mach-sa1100/collie.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index f26aeeab9e14..108939f8d053 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -329,6 +329,11 @@ static struct mtd_partition collie_partitions[] = { .name = "rootfs", .offset = MTDPART_OFS_APPEND, .size = 0x00e20000, + }, { + .name = "bootblock", + .offset = MTDPART_OFS_APPEND, + .size = 0x00020000, + .mask_flags = MTD_WRITEABLE } }; -- cgit v1.2.3 From 6980c3e2514e5ae36b43ec8302f4920d6e3c9434 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Fri, 27 Jun 2014 10:17:27 +0100 Subject: ARM: 8086/1: Set memblock limit for nommu Commit 1c2f87c (ARM: 8025/1: Get rid of meminfo) changed find_limits to use memblock_get_current_limit for calculating the max_low pfn. nommu targets never actually set a limit on memblock though which means memblock_get_current_limit will just return the default value. Set the memblock_limit to be the end of DDR to make sure bounds are calculated correctly. Signed-off-by: Laura Abbott Signed-off-by: Russell King --- arch/arm/mm/nommu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index da1874f9f8cf..a014dfacd5ca 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -300,6 +300,7 @@ void __init sanity_check_meminfo(void) sanity_check_meminfo_mpu(); end = memblock_end_of_DRAM(); high_memory = __va(end - 1) + 1; + memblock_set_current_limit(end); } /* -- cgit v1.2.3 From 42309ab450b608ddcfafa90e4cfa93a5001ecfba Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 27 Jun 2014 17:01:47 +0100 Subject: ARM: 8087/1: ptrace: reload syscall number after secure_computing() check On the syscall tracing path, we call out to secure_computing() to allow seccomp to check the syscall number being attempted. As part of this, a SIGTRAP may be sent to the tracer and the syscall could be re-written by a subsequent SET_SYSCALL ptrace request. Unfortunately, this new syscall is ignored by the current code unless TIF_SYSCALL_TRACE is also set on the current thread. This patch slightly reworks the enter path of the syscall tracing code so that we always reload the syscall number from current_thread_info()->syscall after the potential ptrace traps. Acked-by: Kees Cook Tested-by: Kees Cook Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/ptrace.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 0dd3b79b15c3..0c27ed6f3f23 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -908,7 +908,7 @@ enum ptrace_syscall_dir { PTRACE_SYSCALL_EXIT, }; -static int tracehook_report_syscall(struct pt_regs *regs, +static void tracehook_report_syscall(struct pt_regs *regs, enum ptrace_syscall_dir dir) { unsigned long ip; @@ -926,7 +926,6 @@ static int tracehook_report_syscall(struct pt_regs *regs, current_thread_info()->syscall = -1; regs->ARM_ip = ip; - return current_thread_info()->syscall; } asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) @@ -938,7 +937,9 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) return -1; if (test_thread_flag(TIF_SYSCALL_TRACE)) - scno = tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); + tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); + + scno = current_thread_info()->syscall; if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_enter(regs, scno); -- cgit v1.2.3 From 752ef800a604c0b855077ec480dc9c6ea5b797ee Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 12 Jun 2014 17:09:31 +0200 Subject: ARM: mvebu: move Armada 375 external abort logic as a quirk In preparation to a small re-organization of the initialization sequence in board-v7.c, this commit moves the registration of the custom external abort handler on Armada 375 later in the boot sequence, and makes it more similar to the other quirks that we already have. There is indeed no need to register this abort handler particularly early, it simply needs to be registered before switching to userspace. In addition to this, this commit makes the registration of the custom abort handler conditional on Armada 375 Z1, because Armada 375 A0 and later iterations are not affected by the issue. This commit was tested on both Armada 375 Z1 and Armada 375 A0 platforms. Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1402585772-10405-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/board-v7.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 8bb742fdf5ca..804c952329e2 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -78,10 +78,17 @@ static void __init mvebu_timer_and_clk_init(void) mvebu_scu_enable(); coherency_init(); BUG_ON(mvebu_mbus_dt_init(coherency_available())); +} + +static void __init external_abort_quirk(void) +{ + u32 dev, rev; - if (of_machine_is_compatible("marvell,armada375")) - hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, - "imprecise external abort"); + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV) + return; + + hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, + "imprecise external abort"); } static void __init i2c_quirk(void) @@ -169,8 +176,10 @@ static void __init mvebu_dt_init(void) { if (of_machine_is_compatible("plathome,openblocks-ax3-4")) i2c_quirk(); - if (of_machine_is_compatible("marvell,a375-db")) + if (of_machine_is_compatible("marvell,a375-db")) { + external_abort_quirk(); thermal_quirk(); + } of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -- cgit v1.2.3 From 011788907ba955f87875fcfb4914881b28f7f99d Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 12 Jun 2014 17:09:32 +0200 Subject: ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup Commit 497a92308af8e9385fa3d135f7f416a997e4b93b ("ARM: mvebu: implement L2/PCIe deadlock workaround") introduced some logic in coherency.c to adjust the PL310 cache controller Device Tree node of Armada 375 and Armada 38x platform to include the 'arm,io-coherent' property if the system is running with hardware I/O coherency enabled. However, with the L2CC driver cleanup done by Russell King, the initialization of the L2CC driver has been moved earlier, and is now part of the init_IRQ() ARM function in arch/arm/kernel/irq.c. Therefore, calling coherency_init() in ->init_time() is now too late, as the Device Tree property gets added too late (after the L2CC driver has been initialized). In order to fix this, this commit removes the ->init_time() callback use in board-v7.c and replaces it with an ->init_irq() callback. We therefore no longer use the default ->init_irq() callback, but we now use the default ->init_time() callback. In this newly introduced ->init_irq() callback, we call irqchip_init() which is the default behavior when ->init_irq() isn't defined, and then do the initialization related to the coherency: SCU, coherency fabric, and mvebu-mbus (which is needed to start secondary CPUs). Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1402585772-10405-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/board-v7.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 804c952329e2..b2524d689f21 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -71,10 +72,9 @@ static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr, return 1; } -static void __init mvebu_timer_and_clk_init(void) +static void __init mvebu_init_irq(void) { - of_clk_init(NULL); - clocksource_of_init(); + irqchip_init(); mvebu_scu_enable(); coherency_init(); BUG_ON(mvebu_mbus_dt_init(coherency_available())); @@ -194,7 +194,7 @@ DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") .l2c_aux_mask = ~0, .smp = smp_ops(armada_xp_smp_ops), .init_machine = mvebu_dt_init, - .init_time = mvebu_timer_and_clk_init, + .init_irq = mvebu_init_irq, .restart = mvebu_restart, .dt_compat = armada_370_xp_dt_compat, MACHINE_END @@ -207,7 +207,7 @@ static const char * const armada_375_dt_compat[] = { DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, - .init_time = mvebu_timer_and_clk_init, + .init_irq = mvebu_init_irq, .init_machine = mvebu_dt_init, .restart = mvebu_restart, .dt_compat = armada_375_dt_compat, @@ -222,7 +222,7 @@ static const char * const armada_38x_dt_compat[] = { DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, - .init_time = mvebu_timer_and_clk_init, + .init_irq = mvebu_init_irq, .restart = mvebu_restart, .dt_compat = armada_38x_dt_compat, MACHINE_END -- cgit v1.2.3 From 6509dc74c9f55ffaa558738b96c4da8b98d39571 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Mon, 30 Jun 2014 14:09:25 +0200 Subject: ARM: mvebu: fix cpuidle implementation to work on big-endian systems On Marvell Armada XP, when a CPU comes back from deep idle state of cpuidle, it restarts its execution at armada_370_xp_cpu_resume(), which puts back the CPU into the coherency, and then calls the generic cpu_resume() function. While this works on little-endian configurations, it doesn't work on big-endian configurations because the CPU restarts in little-endian, and therefore must be switched back to big-endian to operate properly. To achieve this, a 'setend be' instruction must be executed in big-endian configurations. However, the ARM_BE8() macro that is used to implement nice compile-time conditional for ARM LE vs. ARM BE8 is not easily usable in inline assembly. Therefore, this patch moves the armada_370_xp_cpu_resume() C function, which was anyway just a block of inline assembly, into a proper pmsu_ll.S file, and adds the appropriate ARM_BE8(setend be) instruction. Without this patch, an Armada XP big endian configuration with cpuidle enabled fails to boot, as it hangs as soon as one of the CPU hits the deep idle state. Signed-off-by: Thomas Petazzoni Link: https://lkml.kernel.org/r/1404130165-3593-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/Makefile | 2 +- arch/arm/mach-mvebu/pmsu.c | 9 ++------- arch/arm/mach-mvebu/pmsu_ll.S | 25 +++++++++++++++++++++++++ 3 files changed, 28 insertions(+), 8 deletions(-) create mode 100644 arch/arm/mach-mvebu/pmsu_ll.S (limited to 'arch/arm') diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 2ecb828e4a8b..1636cdbef01a 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -7,7 +7,7 @@ CFLAGS_pmsu.o := -march=armv7-a obj-y += system-controller.o mvebu-soc-id.o ifeq ($(CONFIG_MACH_MVEBU_V7),y) -obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o +obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o endif diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 53a55c8520bf..a1d407c0febe 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -66,6 +66,8 @@ static void __iomem *pmsu_mp_base; extern void ll_disable_coherency(void); extern void ll_enable_coherency(void); +extern void armada_370_xp_cpu_resume(void); + static struct platform_device armada_xp_cpuidle_device = { .name = "cpuidle-armada-370-xp", }; @@ -140,13 +142,6 @@ static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void) writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL); } -static void armada_370_xp_cpu_resume(void) -{ - asm volatile("bl ll_add_cpu_to_smp_group\n\t" - "bl ll_enable_coherency\n\t" - "b cpu_resume\n\t"); -} - /* No locking is needed because we only access per-CPU registers */ void armada_370_xp_pmsu_idle_prepare(bool deepidle) { diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S new file mode 100644 index 000000000000..fc3de68d8c54 --- /dev/null +++ b/arch/arm/mach-mvebu/pmsu_ll.S @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2014 Marvell + * + * Thomas Petazzoni + * Gregory Clement + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include + +/* + * This is the entry point through which CPUs exiting cpuidle deep + * idle state are going. + */ +ENTRY(armada_370_xp_cpu_resume) +ARM_BE8(setend be ) @ go BE8 if entered LE + bl ll_add_cpu_to_smp_group + bl ll_enable_coherency + b cpu_resume +ENDPROC(armada_370_xp_cpu_resume) + -- cgit v1.2.3 From 48f7bc86b6e75bcb71441c77378c1cde6ecbe475 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Thu, 23 Jan 2014 15:05:49 -0500 Subject: ARM: kprobes: Prevent known test failures stopping other tests running Due to a long-standing issue with Thumb symbol lookup [1] the jprobes tests fail when built into a kernel compiled as Thumb mode. (They work fine for ARM mode kernels or for Thumb when built as a loadable module.) Rather than have this problem terminate testing prematurely lets instead emit an error message and carry on with the main kprobes tests, delaying the final failure report until the end. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-August/063026.html Signed-off-by: Jon Medhurst --- arch/arm/kernel/kprobes-test.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c index 379639998d5a..08d731294bcd 100644 --- a/arch/arm/kernel/kprobes-test.c +++ b/arch/arm/kernel/kprobes-test.c @@ -225,6 +225,7 @@ static int pre_handler_called; static int post_handler_called; static int jprobe_func_called; static int kretprobe_handler_called; +static int tests_failed; #define FUNC_ARG1 0x12345678 #define FUNC_ARG2 0xabcdef @@ -461,6 +462,13 @@ static int run_api_tests(long (*func)(long, long)) pr_info(" jprobe\n"); ret = test_jprobe(func); +#if defined(CONFIG_THUMB2_KERNEL) && !defined(MODULE) + if (ret == -EINVAL) { + pr_err("FAIL: Known longtime bug with jprobe on Thumb kernels\n"); + tests_failed = ret; + ret = 0; + } +#endif if (ret < 0) return ret; @@ -1671,6 +1679,8 @@ static int __init run_all_tests(void) #endif out: + if (ret == 0) + ret = tests_failed; if (ret == 0) pr_info("Finished kprobe tests OK\n"); else -- cgit v1.2.3 From 272226007f436eff953c4398c1f5509cb74889ac Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Mon, 3 Mar 2014 15:08:30 +0000 Subject: ARM: kprobes: Disallow instructions with PC and register specified shift ARM data processing instructions which have a register specified shift are defined as UNPREDICTABLE if PC is used for any register, not just the shift value as the code was previous assuming. This issue manifests on A15 devices as either test case failures or undefined instructions aborts. Reported-by: David Long Signed-off-by: Jon Medhurst --- arch/arm/kernel/kprobes-test-arm.c | 22 ++++++++++++---------- arch/arm/kernel/probes-arm.c | 6 +++--- 2 files changed, 15 insertions(+), 13 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index 9db4b659d03e..e73f9cff9225 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -74,8 +74,6 @@ void kprobe_arm_test_cases(void) TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\ TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\ TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\ - TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\ - TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\ TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \ TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \ TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \ @@ -103,8 +101,6 @@ void kprobe_arm_test_cases(void) TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \ TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \ TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \ - TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \ - TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \ TEST_R( op "eq r",11,VAL1,", #0xf5") \ TEST_R( op "ne r",0, VAL1,", #0xf5000000") \ TEST_R( op " r",8, VAL2,", #0x000af000") @@ -125,7 +121,6 @@ void kprobe_arm_test_cases(void) TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \ TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \ TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \ - TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \ TEST( op "eq" s " r0, #0xf5") \ TEST( op "ne" s " r11, #0xf5000000") \ TEST( op s " r7, #0x000af000") \ @@ -159,12 +154,19 @@ void kprobe_arm_test_cases(void) TEST_SUPPORTED("cmp pc, #0x1000"); TEST_SUPPORTED("cmp sp, #0x1000"); - /* Data-processing with PC as shift*/ + /* Data-processing with PC and a shift count in a register */ TEST_UNSUPPORTED(__inst_arm(0xe15c0f1e) " @ cmp r12, r14, asl pc") TEST_UNSUPPORTED(__inst_arm(0xe1a0cf1e) " @ mov r12, r14, asl pc") TEST_UNSUPPORTED(__inst_arm(0xe08caf1e) " @ add r10, r12, r14, asl pc") - - /* Data-processing with PC as shift*/ + TEST_UNSUPPORTED(__inst_arm(0xe151021f) " @ cmp r1, pc, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe17f0211) " @ cmn pc, r1, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe1a0121f) " @ mov r1, pc, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe1a0f211) " @ mov pc, r1, lsl r2") + TEST_UNSUPPORTED(__inst_arm(0xe042131f) " @ sub r1, r2, pc, lsl r3") + TEST_UNSUPPORTED(__inst_arm(0xe1cf1312) " @ bic r1, pc, r2, lsl r3") + TEST_UNSUPPORTED(__inst_arm(0xe081f312) " @ add pc, r1, r2, lsl r3") + + /* Data-processing with PC as a target and status registers updated */ TEST_UNSUPPORTED("movs pc, r1") TEST_UNSUPPORTED("movs pc, r1, lsl r2") TEST_UNSUPPORTED("movs pc, #0x10000") @@ -187,14 +189,14 @@ void kprobe_arm_test_cases(void) TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"") TEST_BF_R ("add pc, r",14,2f-1f-8,", pc") TEST_BF_R ("mov pc, r",0,2f,"") - TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"") + TEST_BF_R ("add pc, pc, r",14,(2f-1f-8)*2,", asr #1") TEST_BB( "sub pc, pc, #1b-2b+8") #if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7) TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */ #endif TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"") TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc") - TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"") + TEST_R( "add pc, pc, r",10,-2,", asl #1") #ifdef CONFIG_THUMB2_KERNEL TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"") TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8") diff --git a/arch/arm/kernel/probes-arm.c b/arch/arm/kernel/probes-arm.c index 51a13a027989..8eaef81d8344 100644 --- a/arch/arm/kernel/probes-arm.c +++ b/arch/arm/kernel/probes-arm.c @@ -341,12 +341,12 @@ static const union decode_item arm_cccc_000x_table[] = { /* CMP (reg-shift reg) cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */ /* CMN (reg-shift reg) cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0f900090, 0x01100010, PROBES_DATA_PROCESSING_REG, - REGS(ANY, 0, NOPC, 0, ANY)), + REGS(NOPC, 0, NOPC, 0, NOPC)), /* MOV (reg-shift reg) cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */ /* MVN (reg-shift reg) cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0fa00090, 0x01a00010, PROBES_DATA_PROCESSING_REG, - REGS(0, ANY, NOPC, 0, ANY)), + REGS(0, NOPC, NOPC, 0, NOPC)), /* AND (reg-shift reg) cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */ /* EOR (reg-shift reg) cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */ @@ -359,7 +359,7 @@ static const union decode_item arm_cccc_000x_table[] = { /* ORR (reg-shift reg) cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */ /* BIC (reg-shift reg) cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */ DECODE_EMULATEX (0x0e000090, 0x00000010, PROBES_DATA_PROCESSING_REG, - REGS(ANY, ANY, NOPC, 0, ANY)), + REGS(NOPC, NOPC, NOPC, 0, NOPC)), DECODE_END }; -- cgit v1.2.3 From 449fd15fbcde239875031d70fd06abb4a0e1ed09 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Tue, 11 Mar 2014 14:05:26 +0000 Subject: ARM: kprobes: Fix test code compilation errors for ARMv4 targets Conditionally compile kprobes test cases for ARMv5 instructions to avoid compilation errors with ARMv4 targets like: /tmp/cc7Tx8ST.s:16740: Error: selected processor does not support ARM mode `clz r0,r0' Signed-off-by: Jon Medhurst --- arch/arm/kernel/kprobes-test-arm.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index e73f9cff9225..cb1424240ff6 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -218,6 +218,7 @@ void kprobe_arm_test_cases(void) TEST_BB_R("bx r",7,2f,"") TEST_BF_R("bxeq r",14,2f,"") +#if __LINUX_ARM_ARCH__ >= 5 TEST_R("clz r0, r",0, 0x0,"") TEST_R("clzeq r7, r",14,0x1,"") TEST_R("clz lr, r",7, 0xffffffff,"") @@ -339,6 +340,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(__inst_arm(0xe16f02e1) " @ smultt pc, r1, r2") TEST_UNSUPPORTED(__inst_arm(0xe16002ef) " @ smultt r0, pc, r2") TEST_UNSUPPORTED(__inst_arm(0xe1600fe1) " @ smultt r0, r1, pc") +#endif TEST_GROUP("Multiply and multiply-accumulate") @@ -561,6 +563,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED("ldrsht r1, [r2], #48") #endif +#if __LINUX_ARM_ARCH__ >= 5 TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]") TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]") TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!") @@ -597,6 +600,7 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(__inst_arm(0xe1efc3d0) " @ ldrd r12, [pc, #48]!") TEST_UNSUPPORTED(__inst_arm(0xe0c9f3d0) " @ ldrd pc, [r9], #48") TEST_UNSUPPORTED(__inst_arm(0xe0c9e3d0) " @ ldrd lr, [r9], #48") +#endif TEST_GROUP("Miscellaneous") @@ -1229,7 +1233,9 @@ void kprobe_arm_test_cases(void) TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0") COPROCESSOR_INSTRUCTIONS_ST_LD("",e) +#if __LINUX_ARM_ARCH__ >= 5 COPROCESSOR_INSTRUCTIONS_MC_MR("",e) +#endif TEST_UNSUPPORTED("svc 0") TEST_UNSUPPORTED("svc 0xffffff") @@ -1289,7 +1295,9 @@ void kprobe_arm_test_cases(void) TEST( "blx __dummy_thumb_subroutine_odd") #endif /* __LINUX_ARM_ARCH__ >= 6 */ +#if __LINUX_ARM_ARCH__ >= 5 COPROCESSOR_INSTRUCTIONS_ST_LD("2",f) +#endif #if __LINUX_ARM_ARCH__ >= 6 COPROCESSOR_INSTRUCTIONS_MC_MR("2",f) #endif -- cgit v1.2.3 From dd94324b983afe114ba9e7ee3649313b451f63ce Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 27 May 2014 14:25:43 +0530 Subject: ARM: dts: dra7xx-clocks: Fix the l3 and l4 clock rates Without the patch: /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div/l4_root_clk_div # cat clk_rate 532000000 With the patch: /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div # cat clk_rate 266000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div/l4_root_clk_div # cat clk_rate 133000000 The l3 clock derived from core DPLL is actually a divider clock, with the default divider set to 2. l4 then derived from l3 is a fixed factor clock, but the fixed divider is 2 and not 1. Which means the l3 clock is half of core DPLLs h12x2 and l4 is half of l3 (as seen with this patch) Signed-off-by: Rajendra Nayak Signed-off-by: Tero Kristo --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index b03cfe49d22b..d126d5763422 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -673,10 +673,12 @@ l3_iclk_div: l3_iclk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x0100>; clocks = <&dpll_core_h12x2_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; l4_root_clk_div: l4_root_clk_div { @@ -684,7 +686,7 @@ compatible = "fixed-factor-clock"; clocks = <&l3_iclk_div>; clock-mult = <1>; - clock-div = <1>; + clock-div = <2>; }; video1_clk2_div: video1_clk2_div { -- cgit v1.2.3 From 73ea6ec66a9f6b81335e55ca642f25172c283b20 Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Sat, 5 Jul 2014 06:09:18 +0900 Subject: ARM: EXYNOS: Fix the check for non-smp configuration Commit 1754c42e3db5("ARM: exynos: move sysram info to exynos.c") missed out the CONFIG_ prefix causing exynos_sysram_init() to get called twice for SMP configurations. Signed-off-by: Abhilash Kesavan Reviewed-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index f38cf7c110cc..95cad252eb1b 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -297,7 +297,7 @@ static void __init exynos_dt_machine_init(void) * This is called from smp_prepare_cpus if we've built for SMP, but * we still need to set it up for PM and firmware ops if not. */ - if (!IS_ENABLED(SMP)) + if (!IS_ENABLED(CONFIG_SMP)) exynos_sysram_init(); exynos_cpuidle_init(); -- cgit v1.2.3 From 2fd82d33011479e4ee3b1df8ddaa561201fe145d Mon Sep 17 00:00:00 2001 From: Jaewon Kim Date: Sat, 5 Jul 2014 06:31:31 +0900 Subject: ARM: dts: fix pwm-cells in pwm node for exynos4 pwm-cells should be 3. Third cell is optional PWM flags. And This flag supported by this binding is PWM_POLARITY_INVERTED. Signed-off-by: Jaewon Kim Reviewed-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index fbaf426d2daa..17b22e9cc2aa 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -554,7 +554,7 @@ interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; clocks = <&clock CLK_PWM>; clock-names = "timers"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; -- cgit v1.2.3 From d767af5e66ee11928bd17df32b342a8737177376 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 29 Jun 2014 15:48:53 +0200 Subject: ARM: sunxi: Reintroduce the restart code for A10/A20 SoCs This partly reverts commits 553600502b84 (ARM: sunxi: Remove reset code from the platform) and 5e669ec583e2 (ARM: sunxi: Remove init_machine callback) for the sun4i, sun5i and sun7i families. This is needed because the watchdog counterpart of these commits was dropped, and didn't make it into 3.16. In order to still be able to reboot the board, we need to reintroduce that code. Of course, the long term view is still to get rid of that code in mach-sunxi. Signed-off-by: Maxime Ripard Signed-off-by: Olof Johansson --- arch/arm/mach-sunxi/sunxi.c | 77 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 3f9587bb51f6..b6085084e0ff 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -12,8 +12,81 @@ #include #include +#include +#include +#include +#include +#include +#include +#include +#include #include +#include +#include + +#define SUN4I_WATCHDOG_CTRL_REG 0x00 +#define SUN4I_WATCHDOG_CTRL_RESTART BIT(0) +#define SUN4I_WATCHDOG_MODE_REG 0x04 +#define SUN4I_WATCHDOG_MODE_ENABLE BIT(0) +#define SUN4I_WATCHDOG_MODE_RESET_ENABLE BIT(1) + +#define SUN6I_WATCHDOG1_IRQ_REG 0x00 +#define SUN6I_WATCHDOG1_CTRL_REG 0x10 +#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0) +#define SUN6I_WATCHDOG1_CONFIG_REG 0x14 +#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0) +#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1) +#define SUN6I_WATCHDOG1_MODE_REG 0x18 +#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0) + +static void __iomem *wdt_base; + +static void sun4i_restart(enum reboot_mode mode, const char *cmd) +{ + if (!wdt_base) + return; + + /* Enable timer and set reset bit in the watchdog */ + writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, + wdt_base + SUN4I_WATCHDOG_MODE_REG); + + /* + * Restart the watchdog. The default (and lowest) interval + * value for the watchdog is 0.5s. + */ + writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG); + + while (1) { + mdelay(5); + writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, + wdt_base + SUN4I_WATCHDOG_MODE_REG); + } +} + +static struct of_device_id sunxi_restart_ids[] = { + { .compatible = "allwinner,sun4i-a10-wdt" }, + { /*sentinel*/ } +}; + +static void sunxi_setup_restart(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, sunxi_restart_ids); + if (WARN(!np, "unable to setup watchdog restart")) + return; + + wdt_base = of_iomap(np, 0); + WARN(!wdt_base, "failed to map watchdog base address"); +} + +static void __init sunxi_dt_init(void) +{ + sunxi_setup_restart(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} static const char * const sunxi_board_dt_compat[] = { "allwinner,sun4i-a10", @@ -23,7 +96,9 @@ static const char * const sunxi_board_dt_compat[] = { }; DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") + .init_machine = sunxi_dt_init, .dt_compat = sunxi_board_dt_compat, + .restart = sun4i_restart, MACHINE_END static const char * const sun6i_board_dt_compat[] = { @@ -51,5 +126,7 @@ static const char * const sun7i_board_dt_compat[] = { }; DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family") + .init_machine = sunxi_dt_init, .dt_compat = sun7i_board_dt_compat, + .restart = sun4i_restart, MACHINE_END -- cgit v1.2.3 From 0cd8d4052ae4c690fc3ea6133a0ad5404360308d Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Sun, 6 Jul 2014 15:51:23 -0600 Subject: ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver The commit 7be914f {ARM: OMAP3: PRM/CM: Cleanup unused header} removed some of the macros used by the TI DSP/Bridge driver. This fixes the following build errors when trying to build DSP/Bridge driver (disabled at present), otherwise results in the following build errors: drivers/staging/tidspbridge/core/tiomap3430.c:531:31: error: 'OMAP3430_AUTO_IVA2_DPLL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430.c:531:31: note: each undeclared identifier is reported only once for each function it appears in make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430.o] Error 1 make[3]: *** Waiting for unfinished jobs.... drivers/staging/tidspbridge/core/tiomap_io.c: In function 'sm_interrupt_dsp': drivers/staging/tidspbridge/core/tiomap_io.c:404:31: error: 'OMAP3430_AUTO_IVA2_DPLL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap_io.c:404:31: note: each undeclared identifier is reported only once for each function it appears in drivers/staging/tidspbridge/core/tiomap_io.c:414:12: error: 'OMAP3430_IVA2_DPLL_FREQSEL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap_io.c:415:12: error: 'OMAP3430_EN_IVA2_DPLL_SHIFT' undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap_io.o] Error 1 drivers/staging/tidspbridge/core/tiomap3430_pwr.c: In function 'dsp_clk_wakeup_event_ctrl': drivers/staging/tidspbridge/core/tiomap3430_pwr.c:442:19: error: 'OMAP3430_GRPSEL_GPT5_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:442:19: note: each undeclared identifier is reported only once for each function it appears in drivers/staging/tidspbridge/core/tiomap3430_pwr.c:455:19: error: 'OMAP3430_GRPSEL_GPT6_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:468:19: error: 'OMAP3430_GRPSEL_GPT7_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:481:19: error: 'OMAP3430_GRPSEL_GPT8_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:494:19: error: 'OMAP3430_GRPSEL_MCBSP1_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:546:19: error: 'OMAP3430_GRPSEL_MCBSP5_MASK' undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430_pwr.o] Error 1 make[2]: *** [drivers/staging/tidspbridge] Error 2 Fixes: 7be914f (ARM: OMAP3: PRM/CM: Cleanup unused header) Cc: Rajendra Nayak Cc: Paul Walmsley Signed-off-by: Suman Anna Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cm-regbits-34xx.h | 3 +++ arch/arm/mach-omap2/prm-regbits-34xx.h | 6 ++++++ 2 files changed, 9 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 04dab2fcf862..ee6c784cd6b7 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -26,11 +26,14 @@ #define OMAP3430_EN_WDT3_SHIFT 12 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0) #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0 +#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT 4 #define OMAP3430_IVA2_DPLL_FREQSEL_MASK (0xf << 4) #define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT 3 +#define OMAP3430_EN_IVA2_DPLL_SHIFT 0 #define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) #define OMAP3430_ST_IVA2_SHIFT 0 #define OMAP3430_ST_IVA2_CLK_MASK (1 << 0) +#define OMAP3430_AUTO_IVA2_DPLL_SHIFT 0 #define OMAP3430_AUTO_IVA2_DPLL_MASK (0x7 << 0) #define OMAP3430_IVA2_CLK_SRC_SHIFT 19 #define OMAP3430_IVA2_CLK_SRC_WIDTH 3 diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 106132db532b..cbefbd7cfdb5 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -35,6 +35,8 @@ #define OMAP3430_LOGICSTATEST_MASK (1 << 2) #define OMAP3430_LASTLOGICSTATEENTERED_MASK (1 << 2) #define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0) +#define OMAP3430_GRPSEL_MCBSP5_MASK (1 << 10) +#define OMAP3430_GRPSEL_MCBSP1_MASK (1 << 9) #define OMAP3630_GRPSEL_UART4_MASK (1 << 18) #define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17) #define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16) @@ -42,6 +44,10 @@ #define OMAP3430_GRPSEL_GPIO3_MASK (1 << 14) #define OMAP3430_GRPSEL_GPIO2_MASK (1 << 13) #define OMAP3430_GRPSEL_UART3_MASK (1 << 11) +#define OMAP3430_GRPSEL_GPT8_MASK (1 << 9) +#define OMAP3430_GRPSEL_GPT7_MASK (1 << 8) +#define OMAP3430_GRPSEL_GPT6_MASK (1 << 7) +#define OMAP3430_GRPSEL_GPT5_MASK (1 << 6) #define OMAP3430_GRPSEL_MCBSP4_MASK (1 << 2) #define OMAP3430_GRPSEL_MCBSP3_MASK (1 << 1) #define OMAP3430_GRPSEL_MCBSP2_MASK (1 << 0) -- cgit v1.2.3 From 1ea0999e085acb5dacaff163c3941b1d91d59c89 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Sun, 6 Jul 2014 15:51:24 -0600 Subject: ARM: DRA7: hwmod: Fixup SATA hwmod Get rid of optional clock as that is now managed by the AHCI platform driver. Correct .mpu_rt_idx to 1 as the module register space (SYSCONFIG..) is passed as the second memory resource in the device tree. Signed-off-by: Roger Quadros Reviewed-by: Rajendra Nayak Tested-by: Sekhar Nori Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 20b4398cec05..1209266a96b1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1268,9 +1268,6 @@ static struct omap_hwmod_class dra7xx_sata_hwmod_class = { }; /* sata */ -static struct omap_hwmod_opt_clk sata_opt_clks[] = { - { .role = "ref_clk", .clk = "sata_ref_clk" }, -}; static struct omap_hwmod dra7xx_sata_hwmod = { .name = "sata", @@ -1278,6 +1275,7 @@ static struct omap_hwmod dra7xx_sata_hwmod = { .clkdm_name = "l3init_clkdm", .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, .main_clk = "func_48m_fclk", + .mpu_rt_idx = 1, .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, @@ -1285,8 +1283,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .opt_clks = sata_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(sata_opt_clks), }; /* -- cgit v1.2.3 From d904b38df0db137dc5f562010231f76c443cbe28 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Sun, 6 Jul 2014 15:51:24 -0600 Subject: ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss Add the sysconfig class bits for the Super Speed USB controllers Signed-off-by: Roger Quadros Reviewed-by: Rajendra Nayak Tested-by: Sekhar Nori Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 1209266a96b1..284324f2b98a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1727,8 +1727,20 @@ static struct omap_hwmod dra7xx_uart6_hwmod = { * */ +static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = { .name = "usb_otg_ss", + .sysc = &dra7xx_usb_otg_ss_sysc, }; /* usb_otg_ss1 */ -- cgit v1.2.3 From 6340c8720ce34f35b41a2e15d69fe3d755cb2104 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 2 Jul 2014 11:47:35 +0300 Subject: ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflow The divider value provided to the _dpll_test_fint can reach value of 256 with J type DPLLs (USB etc.), which causes an overflow with the u8 datatype. Fix this by changing the parameter to be an int instead. Signed-off-by: Tero Kristo [paul@pwsan.com: changed type of 'n' to unsigned int] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clkt_dpll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 332af927f4d3..67fd26a18441 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -76,7 +76,7 @@ * (assuming that it is counting N upwards), or -2 if the enclosing loop * should skip to the next iteration (again assuming N is increasing). */ -static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n) +static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n) { struct dpll_data *dd; long fint, fint_min, fint_max; -- cgit v1.2.3 From 7abb1a530e87fce0d73f85ac7802648bb542cf26 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 16 May 2014 17:36:09 -0500 Subject: ARM: DRA7/AM43XX: fix header definition for omap44xx_restart omap44xx_restart is defined as a static void inline when DRA7/AM437X is defined alone, which implies that the restart function is no longer functional even though it is built in. So, fix the definition of the same. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/common.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index b2d252bf4a53..dc571f1d3b8a 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -162,7 +162,8 @@ static inline void omap3xxx_restart(enum reboot_mode mode, const char *cmd) } #endif -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) void omap44xx_restart(enum reboot_mode mode, const char *cmd); #else static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd) -- cgit v1.2.3 From e120fb459693bbc1ac3eabdd65c3659d7cfbfd2a Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 4 Jul 2014 12:55:43 +0300 Subject: ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on After clarification from the hardware team it was found that this 1.8V PHY supply can't be switched OFF when SoC is Active. Since the PHY IPs don't contain isolation logic built in the design to allow the power rail to be switched off, there is a very high risk of IP reliability and additional leakage paths which can result in additional power consumption. The only scenario where this rail can be switched off is part of Power on reset sequencing, but it needs to be kept always-on during operation. This patch is required for proper functionality of USB, SATA and PCIe on DRA7-evm. CC: Rajendra Nayak CC: Tero Kristo Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4adc28039c30..83089540e324 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -240,6 +240,7 @@ regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; }; -- cgit v1.2.3 From 526570cb2067363ec93681837e43b4c774b1616c Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Tue, 24 Jun 2014 00:24:27 -0500 Subject: ARM: OMAP2+: create dsp device only on OMAP3 SoCs The DSP platform device for TI DSP/Bridge is currently created unconditionally whenever CONFIG_TIDSPBRIDGE is enabled. This device should only be created on OMAP34xx/ OMAP36xx SoCs, and not for other OMAP3 derived SoCs or when booting multi-arch images on other SoCs. So, add a check for the SoC family both before creating the device and allocating the carveout memory for the device. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/dsp.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index b8208b4b1bd9..f7492df1cbba 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -29,6 +29,7 @@ #ifdef CONFIG_TIDSPBRIDGE_DVFS #include "omap-pm.h" #endif +#include "soc.h" #include @@ -59,6 +60,9 @@ void __init omap_dsp_reserve_sdram_memblock(void) phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE; phys_addr_t paddr; + if (!cpu_is_omap34xx()) + return; + if (!size) return; @@ -83,6 +87,9 @@ static int __init omap_dsp_init(void) int err = -ENOMEM; struct omap_dsp_platform_data *pdata = &omap_dsp_pdata; + if (!cpu_is_omap34xx()) + return 0; + pdata->phys_mempool_base = omap_dsp_get_mempool_base(); if (pdata->phys_mempool_base) { @@ -115,6 +122,9 @@ module_init(omap_dsp_init); static void __exit omap_dsp_exit(void) { + if (!cpu_is_omap34xx()) + return; + platform_device_unregister(omap_dsp_pdev); } module_exit(omap_dsp_exit); -- cgit v1.2.3 From 68e2eb533ef84197d6a60d23f45070cddcf51753 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Guido=20Mart=C3=ADnez?= Date: Wed, 2 Jul 2014 10:35:18 -0300 Subject: ARM: OMAP2+: Make GPMC skip disabled devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, child nodes of the gpmc node are iterated and probed regardless of their 'status' property. This means adding 'status = "disabled";' has no effect. This patch changes the iteration to only probe nodes marked as available. Signed-off-by: Guido Martínez Tested-by: Pekon Gupta Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 2c0c2816900f..8bc13380f0a0 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1615,7 +1615,7 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } - for_each_child_of_node(pdev->dev.of_node, child) { + for_each_available_child_of_node(pdev->dev.of_node, child) { if (!child->name) continue; -- cgit v1.2.3 From 90571d856a01bb2d4eaa6339bcd7c28d9cb4bc59 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 3 Jul 2014 12:51:22 +0300 Subject: ARM: dts: am335x-evm: Enable the McASP FIFO for audio The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evm.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index ecb267767cf5..e2156a583de7 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -529,8 +529,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tps { -- cgit v1.2.3 From 6f2f52b5960d090e81db59f4682cea7463bfd7cd Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 3 Jul 2014 12:51:23 +0300 Subject: ARM: dts: am335x-evmsk: Enable the McASP FIFO for audio The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evmsk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ab9a34ce524c..80a3b215e7d6 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -560,8 +560,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tscadc { -- cgit v1.2.3 From 24faebd641ba75ccbbbb6d8f9131a32881e3dcd2 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 25 Jun 2014 13:42:05 +0200 Subject: ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA. As this board use external clock for RMII interface we should specify 'rmii' phy mode and 'rmii-clock-ext' to make ethernet working. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-igep0033.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 8a0a72dc7dd7..a1a0cc5eb35c 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -105,10 +105,16 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; }; &elm { -- cgit v1.2.3 From 9a2c33a422d60e8e55c5aff6752522dc39993b16 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 7 Jul 2014 13:53:03 +0100 Subject: ARM: l2c: fix revision checking The revision checking in l2c310_enable() was not correct; we were masking the part number rather than the revision number. Fix this to use the correct macro. Fixes: 4374d64933b1 ("ARM: l2c: add automatic enable of early BRESP") Signed-off-by: Russell King --- arch/arm/mm/cache-l2x0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 076172b69422..7c3fb41a462e 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -664,7 +664,7 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) { - unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK; + unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK; bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; if (rev >= L310_CACHE_ID_RTL_R2P0) { -- cgit v1.2.3 From 35e75645f16c86918f26df1bfc2c24ad8ebb5a17 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 8 Jul 2014 08:03:49 +0900 Subject: ARM: EXYNOS: Update secondary boot addr for secure mode Almost all Exynos-series of SoCs that run in secure mode don't need additional offset for every CPU, with Exynos4412 being the only exception. Tested on Origen-Quad (Exynos4412) and Arndale-Octa (Exynos5420). While at it, fix the coding style (space around *). Signed-off-by: Sachin Kamat Signed-off-by: Tushar Behera Tested-by: Andreas Faerber Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/firmware.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index eb91d2350f8c..e8797bb78871 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -57,8 +57,13 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) boot_reg = sysram_ns_base_addr + 0x1c; - if (!soc_is_exynos4212() && !soc_is_exynos3250()) - boot_reg += 4*cpu; + /* + * Almost all Exynos-series of SoCs that run in secure mode don't need + * additional offset for every CPU, with Exynos4412 being the only + * exception. + */ + if (soc_is_exynos4412()) + boot_reg += 4 * cpu; __raw_writel(boot_addr, boot_reg); return 0; -- cgit v1.2.3 From be0b420ad6123e587738a67a9eff3ec213a57604 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Tue, 8 Jul 2014 08:31:41 +0900 Subject: ARM: dts: Update the parent for Audss clocks in Exynos5420 Currently CLK_FOUT_EPLL was set as one of the parents of AUDSS mux. As per the user manual, it should be CLK_MAU_EPLL. The problem surfaced when the bootloader in Peach-pit board set the EPLL clock as the parent of AUDSS mux. While booting the kernel, we used to get a system hang during late boot if CLK_MAU_EPLL was disabled. Signed-off-by: Tushar Behera Signed-off-by: Shaik Ameer Basha Reported-by: Kevin Hilman Tested-by: Javier Martinez Canillas Tested-by: Doug Anderson Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index e38532271ef9..79e9119d3f8d 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -167,7 +167,7 @@ compatible = "samsung,exynos5420-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; -- cgit v1.2.3 From 63288b721a80fb58c00cd47e61a90bc8b33ba588 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 7 Jul 2014 10:53:51 +0800 Subject: ARM: imx: fix shared gate clock Let's say clock A and B are two gate clocks that share the same register bit in hardware. Therefore they are registered as shared gate clocks with imx_clk_gate2_shared(). In a scenario that only clock A is enabled by clk_enable(A) while B is not used, the shared gate will be unexpectedly disabled in hardware. It happens because clk_enable(A) increments the share_count from 0 to 1, while clock B is unused to clock core, and therefore the core function will just disable B by calling clk->ops->disable() directly. The consequence of that call is share_count is decremented to 0 and the gate is disabled in hardware, even though clock A is still in use. The patch fixes the issue by initializing the share_count per hardware state and returns enable state per share_count from .is_enabled() hook, in case it's a shared gate. While at it, add a check in clk_gate2_disable() to ensure it's never called with a zero share_count. Reported-by: Fabio Estevam Fixes: f9f28cdf2167 ("ARM: imx: add shared gate clock support") Signed-off-by: Shawn Guo Tested-by: Fabio Estevam Signed-off-by: Olof Johansson --- arch/arm/mach-imx/clk-gate2.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 4ba587da89d2..84acdfd1d715 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -67,8 +67,12 @@ static void clk_gate2_disable(struct clk_hw *hw) spin_lock_irqsave(gate->lock, flags); - if (gate->share_count && --(*gate->share_count) > 0) - goto out; + if (gate->share_count) { + if (WARN_ON(*gate->share_count == 0)) + goto out; + else if (--(*gate->share_count) > 0) + goto out; + } reg = readl(gate->reg); reg &= ~(3 << gate->bit_idx); @@ -78,19 +82,26 @@ out: spin_unlock_irqrestore(gate->lock, flags); } -static int clk_gate2_is_enabled(struct clk_hw *hw) +static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx) { - u32 reg; - struct clk_gate2 *gate = to_clk_gate2(hw); + u32 val = readl(reg); - reg = readl(gate->reg); - - if (((reg >> gate->bit_idx) & 1) == 1) + if (((val >> bit_idx) & 1) == 1) return 1; return 0; } +static int clk_gate2_is_enabled(struct clk_hw *hw) +{ + struct clk_gate2 *gate = to_clk_gate2(hw); + + if (gate->share_count) + return !!(*gate->share_count); + else + return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx); +} + static struct clk_ops clk_gate2_ops = { .enable = clk_gate2_enable, .disable = clk_gate2_disable, @@ -116,6 +127,10 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, gate->bit_idx = bit_idx; gate->flags = clk_gate2_flags; gate->lock = lock; + + /* Initialize share_count per hardware state */ + if (share_count) + *share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0; gate->share_count = share_count; init.name = name; -- cgit v1.2.3 From 1d29a0722f6c38f79785c9ffb911730598de84e2 Mon Sep 17 00:00:00 2001 From: Jyri Sarha Date: Thu, 26 Jun 2014 22:20:52 +0300 Subject: ARM: OMAP2+: Remove non working OMAP HDMI audio initialization This code is not working currently and it can be removed. There is a conflict in sharing resources with the actual HDMI driver and with the ASoC HDMI audio DAI driver. Signed-off-by: Jyri Sarha Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 28 ---------------------------- 1 file changed, 28 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 592ba0a0ecf3..b6f8f348296e 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -297,33 +297,6 @@ static void omap_init_audio(void) static inline void omap_init_audio(void) {} #endif -#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \ - defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE) - -static struct platform_device omap_hdmi_audio = { - .name = "omap-hdmi-audio", - .id = -1, -}; - -static void __init omap_init_hdmi_audio(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - - oh = omap_hwmod_lookup("dss_hdmi"); - if (!oh) - return; - - pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0); - WARN(IS_ERR(pdev), - "Can't build omap_device for omap-hdmi-audio-dai.\n"); - - platform_device_register(&omap_hdmi_audio); -} -#else -static inline void omap_init_hdmi_audio(void) {} -#endif - #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include @@ -459,7 +432,6 @@ static int __init omap2_init_devices(void) */ omap_init_audio(); omap_init_camera(); - omap_init_hdmi_audio(); omap_init_mbox(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { -- cgit v1.2.3 From c760569d0e9c06b39dd19e82bff0b704d90a73b7 Mon Sep 17 00:00:00 2001 From: Prathyush K Date: Fri, 11 Jul 2014 08:02:15 +0900 Subject: ARM: EXYNOS: Add support for clock handling in power domain While powering on/off a local powerdomain in exynos5 chipsets, the input clocks to each device gets modified. This behaviour is based on the SYSCLK_SYS_PWR_REG registers. E.g. SYSCLK_MFC_SYS_PWR_REG = 0x0, the parent of input clock to MFC (aclk333) gets modified to oscclk = 0x1, no change in clocks. The recommended value of SYSCLK_SYS_PWR_REG before power gating any domain is 0x0. So we must also restore the clocks while powering on a domain everytime. This patch adds the framework for getting the required mux and parent clocks through a power domain device node. With this patch, while powering off a domain, parent is set to oscclk and while powering back on, its re-set to the correct parent which is as per the recommended pd on/off sequence. Signed-off-by: Prathyush K Signed-off-by: Andrew Bresticker Signed-off-by: Arun Kumar K Signed-off-by: Shaik Ameer Basha Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/pm_domains.c | 61 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 60 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index fe6570ebbdde..797cb134bfff 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -24,6 +25,8 @@ #include "regs-pmu.h" +#define MAX_CLK_PER_DOMAIN 4 + /* * Exynos specific wrapper around the generic power domain */ @@ -32,6 +35,9 @@ struct exynos_pm_domain { char const *name; bool is_off; struct generic_pm_domain pd; + struct clk *oscclk; + struct clk *clk[MAX_CLK_PER_DOMAIN]; + struct clk *pclk[MAX_CLK_PER_DOMAIN]; }; static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) @@ -44,6 +50,19 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) pd = container_of(domain, struct exynos_pm_domain, pd); base = pd->base; + /* Set oscclk before powering off a domain*/ + if (!power_on) { + int i; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->clk[i])) + break; + if (clk_set_parent(pd->clk[i], pd->oscclk)) + pr_err("%s: error setting oscclk as parent to clock %d\n", + pd->name, i); + } + } + pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0; __raw_writel(pwr, base); @@ -60,6 +79,20 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) cpu_relax(); usleep_range(80, 100); } + + /* Restore clocks after powering on a domain*/ + if (power_on) { + int i; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + if (IS_ERR(pd->clk[i])) + break; + if (clk_set_parent(pd->clk[i], pd->pclk[i])) + pr_err("%s: error setting parent to clock%d\n", + pd->name, i); + } + } + return 0; } @@ -152,9 +185,11 @@ static __init int exynos4_pm_init_power_domain(void) for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { struct exynos_pm_domain *pd; - int on; + int on, i; + struct device *dev; pdev = of_find_device_by_node(np); + dev = &pdev->dev; pd = kzalloc(sizeof(*pd), GFP_KERNEL); if (!pd) { @@ -170,6 +205,30 @@ static __init int exynos4_pm_init_power_domain(void) pd->pd.power_on = exynos_pd_power_on; pd->pd.of_node = np; + pd->oscclk = clk_get(dev, "oscclk"); + if (IS_ERR(pd->oscclk)) + goto no_clk; + + for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { + char clk_name[8]; + + snprintf(clk_name, sizeof(clk_name), "clk%d", i); + pd->clk[i] = clk_get(dev, clk_name); + if (IS_ERR(pd->clk[i])) + break; + snprintf(clk_name, sizeof(clk_name), "pclk%d", i); + pd->pclk[i] = clk_get(dev, clk_name); + if (IS_ERR(pd->pclk[i])) { + clk_put(pd->clk[i]); + pd->clk[i] = ERR_PTR(-EINVAL); + break; + } + } + + if (IS_ERR(pd->clk[0])) + clk_put(pd->oscclk); + +no_clk: platform_set_drvdata(pdev, pd); on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; -- cgit v1.2.3 From cacaeb829385ef57b267c8e30308360a89994c1f Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Fri, 11 Jul 2014 08:04:03 +0900 Subject: ARM: dts: Add clock property for mfc_pd in exynos5420 Adding the optional clock property for the mfc_pd for handling the re-parenting while pd on/off. Signed-off-by: Arun Kumar K Signed-off-by: Shaik Ameer Basha Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 79e9119d3f8d..15957227ffda 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -260,6 +260,9 @@ mfc_pd: power-domain@10044060 { compatible = "samsung,exynos4210-pd"; reg = <0x10044060 0x20>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, + <&clock CLK_MOUT_USER_ACLK333>; + clock-names = "oscclk", "pclk0", "clk0"; }; disp_pd: power-domain@100440C0 { -- cgit v1.2.3 From bed7118988ef48063c72f67cc2701c72663b3870 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 11 Jul 2014 08:15:32 +0900 Subject: ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250 Currently, the exynos cpuidle driver works correctly only on exynos4210 and 5250. Trying to use it with just one CPU online on any other exynos SoCs will lead to system failure, due to unsupported AFTR mode on other SoCs. This patch fixes the problem by registering the driver only on supported SoCs and letting others simply use default WFI mode until support for them is added. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index f38cf7c110cc..176bbf574d45 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -173,10 +173,8 @@ static struct platform_device exynos_cpuidle = { void __init exynos_cpuidle_init(void) { - if (soc_is_exynos5440()) - return; - - platform_device_register(&exynos_cpuidle); + if (soc_is_exynos4210() || soc_is_exynos5250()) + platform_device_register(&exynos_cpuidle); } void __init exynos_cpufreq_init(void) -- cgit v1.2.3 From 363d4ddc17320ad0906778924d40ba5955ccf194 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Fri, 11 Jul 2014 18:34:56 +0200 Subject: ARM: at91: at91sam9x5: add clocks for usb device Add clocks for usb device, or else switch to CCF, the gadget won't work. Reported-by: Jiri Prchal Signed-off-by: Bo Shen Acked-by: Alexandre Belloni Tested-by: Jiri Prchal Signed-off-by: Nicolas Ferre Signed-off-by: Olof Johansson --- arch/arm/boot/dts/at91sam9x5.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index d6133f497207..2ebc42140ea6 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1045,6 +1045,8 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&usb>, <&udphs_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; ep0 { -- cgit v1.2.3