From cc60a1a4d47a4dea2ca04bad6f16bf43dcd5c1d6 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 23 Jan 2014 14:09:54 -0600 Subject: ARM: dts: msm: split out msm8660 and msm8960 soc into dts include Pull the SoC device tree bits into their own files so other boards based on these SoCs can include them and reduce duplication across a number of boards. Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-msm8660-surf.dts | 59 +-------------------------- arch/arm/boot/dts/qcom-msm8660.dtsi | 63 +++++++++++++++++++++++++++++ arch/arm/boot/dts/qcom-msm8960-cdp.dts | 66 +------------------------------ arch/arm/boot/dts/qcom-msm8960.dtsi | 70 +++++++++++++++++++++++++++++++++ 4 files changed, 135 insertions(+), 123 deletions(-) create mode 100644 arch/arm/boot/dts/qcom-msm8660.dtsi create mode 100644 arch/arm/boot/dts/qcom-msm8960.dtsi (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 68a72f5507b9..169bad90dac9 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -1,63 +1,6 @@ -/dts-v1/; - -/include/ "skeleton.dtsi" - -#include +#include "qcom-msm8660.dtsi" / { model = "Qualcomm MSM8660 SURF"; compatible = "qcom,msm8660-surf", "qcom,msm8660"; - interrupt-parent = <&intc>; - - intc: interrupt-controller@2080000 { - compatible = "qcom,msm-8660-qgic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02080000 0x1000 >, - < 0x02081000 0x1000 >; - }; - - timer@2000000 { - compatible = "qcom,scss-timer", "qcom,msm-timer"; - interrupts = <1 0 0x301>, - <1 1 0x301>, - <1 2 0x301>; - reg = <0x02000000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x40000>; - }; - - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - reg = <0x00800000 0x4000>; - gpio-controller; - #gpio-cells = <2>; - ngpio = <173>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8660"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; - - serial@19c40000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x19c40000 0x1000>, - <0x19c00000 0x1000>; - interrupts = <0 195 0x0>; - clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; - clock-names = "core", "iface"; - }; - - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi new file mode 100644 index 000000000000..69d6c4edea30 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -0,0 +1,63 @@ +/dts-v1/; + +/include/ "skeleton.dtsi" + +#include + +/ { + model = "Qualcomm MSM8660"; + compatible = "qcom,msm8660"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@2080000 { + compatible = "qcom,msm-8660-qgic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02080000 0x1000 >, + < 0x02081000 0x1000 >; + }; + + timer@2000000 { + compatible = "qcom,scss-timer", "qcom,msm-timer"; + interrupts = <1 0 0x301>, + <1 1 0x301>, + <1 2 0x301>; + reg = <0x02000000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x40000>; + }; + + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + reg = <0x00800000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + ngpio = <173>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8660"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; + + serial@19c40000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x19c40000 0x1000>, + <0x19c00000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; + clock-names = "core", "iface"; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 7c30de4fa302..a58fb88315f6 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -1,70 +1,6 @@ -/dts-v1/; - -/include/ "skeleton.dtsi" - -#include +#include "qcom-msm8960.dtsi" / { model = "Qualcomm MSM8960 CDP"; compatible = "qcom,msm8960-cdp", "qcom,msm8960"; - interrupt-parent = <&intc>; - - intc: interrupt-controller@2000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02000000 0x1000 >, - < 0x02002000 0x1000 >; - }; - - timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>; - reg = <0x0200a000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x80000>; - }; - - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - gpio-controller; - #gpio-cells = <2>; - ngpio = <150>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x800000 0x4000>; - }; - - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8960"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; - - clock-controller@4000000 { - compatible = "qcom,mmcc-msm8960"; - reg = <0x4000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - serial@16440000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16440000 0x1000>, - <0x16400000 0x1000>; - interrupts = <0 154 0x0>; - clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - }; - - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi new file mode 100644 index 000000000000..ff002826552a --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -0,0 +1,70 @@ +/dts-v1/; + +/include/ "skeleton.dtsi" + +#include + +/ { + model = "Qualcomm MSM8960"; + compatible = "qcom,msm8960"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02000000 0x1000 >, + < 0x02002000 0x1000 >; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x80000>; + }; + + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + gpio-controller; + #gpio-cells = <2>; + ngpio = <150>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800000 0x4000>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8960"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; + + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; +}; -- cgit v1.2.3 From 52b52b4681df8bad450692cf3fa8a61ca1e1599a Mon Sep 17 00:00:00 2001 From: Rohit Vaswani Date: Fri, 21 Jun 2013 12:17:37 -0700 Subject: ARM: msm: Remove pen_release usage pen_release is no longer required as the synchronization is now managed by generic arm code. This is done as suggested in https://lkml.org/lkml/2013/6/4/184 Cc: Russell King Signed-off-by: Rohit Vaswani Signed-off-by: Stephen Boyd Signed-off-by: Kumar Gala --- arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/headsmp.S | 39 --------------------------------------- arch/arm/mach-msm/hotplug.c | 31 ++++--------------------------- arch/arm/mach-msm/platsmp.c | 37 +++---------------------------------- 4 files changed, 8 insertions(+), 101 deletions(-) delete mode 100644 arch/arm/mach-msm/headsmp.S (limited to 'arch/arm') diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 8e307a10d3c3..721f27f50d96 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -19,7 +19,7 @@ obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_SMP) += headsmp.o platsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S deleted file mode 100644 index 6c62c3f82fe6..000000000000 --- a/arch/arm/mach-msm/headsmp.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/arch/arm/mach-realview/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include - -/* - * MSM specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(msm_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup -ENDPROC(msm_secondary_startup) - - .align -1: .long . - .long pen_release diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c index 326a87261f9a..cea80fc6e48e 100644 --- a/arch/arm/mach-msm/hotplug.c +++ b/arch/arm/mach-msm/hotplug.c @@ -24,33 +24,10 @@ static inline void cpu_leave_lowpower(void) static inline void platform_do_lowpower(unsigned int cpu) { - /* Just enter wfi for now. TODO: Properly shut off the cpu. */ - for (;;) { - /* - * here's the WFI - */ - asm("wfi" - : - : - : "memory", "cc"); - - if (pen_release == cpu_logical_map(cpu)) { - /* - * OK, proper wakeup, we're done - */ - break; - } - - /* - * getting here, means that we have come out of WFI without - * having been woken up - this shouldn't happen - * - * The trouble is, letting people know about this is not really - * possible, since we are currently running incoherently, and - * therefore cannot safely call printk() or anything else - */ - pr_debug("CPU%u: spurious wakeup call\n", cpu); - } + asm("wfi" + : + : + : "memory", "cc"); } /* diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index f10a1f58fde9..3721b31ef6ae 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -12,13 +12,10 @@ #include #include #include -#include #include #include -#include #include -#include #include #include "scm-boot.h" @@ -28,7 +25,7 @@ #define SCSS_CPU1CORE_RESET 0xD80 #define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64 -extern void msm_secondary_startup(void); +extern void secondary_startup(void); static DEFINE_SPINLOCK(boot_lock); @@ -40,13 +37,6 @@ static inline int get_core_count(void) static void msm_secondary_init(unsigned int cpu) { - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - pen_release = -1; - smp_wmb(); - /* * Synchronise with the boot thread. */ @@ -57,7 +47,7 @@ static void msm_secondary_init(unsigned int cpu) static void prepare_cold_cpu(unsigned int cpu) { int ret; - ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup), + ret = scm_set_boot_addr(virt_to_phys(secondary_startup), SCM_FLAG_COLDBOOT_CPU1); if (ret == 0) { void __iomem *sc1_base_ptr; @@ -75,7 +65,6 @@ static void prepare_cold_cpu(unsigned int cpu) static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; static int cold_boot_done; /* Only need to bring cpu out of reset this way once */ @@ -90,17 +79,6 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) */ spin_lock(&boot_lock); - /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. - */ - pen_release = cpu_logical_map(cpu); - sync_cache_w(&pen_release); - /* * Send the secondary CPU a soft interrupt, thereby causing * the boot monitor to read the system wide flags register, @@ -108,22 +86,13 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) */ arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - /* * now the secondary core is starting up let it run its * calibrations, then wait for it to finish */ spin_unlock(&boot_lock); - return pen_release != -1 ? -ENOSYS : 0; + return 0; } /* -- cgit v1.2.3 From 6a032dba7d2329084dca41cc8d82c0cda13103ef Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 31 Jan 2014 13:48:29 -0600 Subject: ARM: msm: kill off hotplug.c Right now hotplug.c only really implements msm_cpu_die as a wfi. Just move that implementation into platsmp.c. At the same time we use the existing wfi() instead of inline asm. Signed-off-by: Kumar Gala --- arch/arm/mach-msm/Makefile | 1 - arch/arm/mach-msm/common.h | 1 - arch/arm/mach-msm/hotplug.c | 51 --------------------------------------------- arch/arm/mach-msm/platsmp.c | 7 +++++++ 4 files changed, 7 insertions(+), 53 deletions(-) delete mode 100644 arch/arm/mach-msm/hotplug.c (limited to 'arch/arm') diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 721f27f50d96..8327f603df4c 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h index 33c7725adae2..0a4899b7d85c 100644 --- a/arch/arm/mach-msm/common.h +++ b/arch/arm/mach-msm/common.h @@ -24,7 +24,6 @@ extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size, unsigned int mtype, void *caller); extern struct smp_operations msm_smp_ops; -extern void msm_cpu_die(unsigned int cpu); struct msm_mmc_platform_data; diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c deleted file mode 100644 index cea80fc6e48e..000000000000 --- a/arch/arm/mach-msm/hotplug.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#include - -#include "common.h" - -static inline void cpu_enter_lowpower(void) -{ -} - -static inline void cpu_leave_lowpower(void) -{ -} - -static inline void platform_do_lowpower(unsigned int cpu) -{ - asm("wfi" - : - : - : "memory", "cc"); -} - -/* - * platform-specific code to shutdown a CPU - * - * Called with IRQs disabled - */ -void __ref msm_cpu_die(unsigned int cpu) -{ - /* - * we're ready for shutdown now, so do it - */ - cpu_enter_lowpower(); - platform_do_lowpower(cpu); - - /* - * bring this CPU back into the world of cache - * coherency, and then restore interrupts - */ - cpu_leave_lowpower(); -} diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 3721b31ef6ae..251a91eb102a 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -29,6 +29,13 @@ extern void secondary_startup(void); static DEFINE_SPINLOCK(boot_lock); +#ifdef CONFIG_HOTPLUG_CPU +static void __ref msm_cpu_die(unsigned int cpu) +{ + wfi(); +} +#endif + static inline int get_core_count(void) { /* 1 + the PART[1:0] field of MIDR */ -- cgit v1.2.3 From 3f8e8cee2f4bd02367583cc2d143887d1f49fd6c Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 29 Jan 2014 16:17:30 -0600 Subject: clocksource: qcom: Move clocksource code out of mach-msm We intend to share the clocksource code for MSM platforms between legacy and multiplatform supported qcom SoCs. Acked-by: Olof Johansson Signed-off-by: Kumar Gala --- arch/arm/mach-msm/Kconfig | 13 +- arch/arm/mach-msm/Makefile | 1 - arch/arm/mach-msm/timer.c | 333 --------------------------------------------- 3 files changed, 5 insertions(+), 342 deletions(-) delete mode 100644 arch/arm/mach-msm/timer.c (limited to 'arch/arm') diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 9625cf378931..3c4eca71f976 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -21,7 +21,7 @@ config ARCH_MSM8X60 select CPU_V7 select HAVE_SMP select MSM_SCM if SMP - select MSM_TIMER + select CLKSRC_QCOM config ARCH_MSM8960 bool "Enable support for MSM8960" @@ -29,7 +29,7 @@ config ARCH_MSM8960 select CPU_V7 select HAVE_SMP select MSM_SCM if SMP - select MSM_TIMER + select CLKSRC_QCOM config ARCH_MSM8974 bool "Enable support for MSM8974" @@ -54,7 +54,7 @@ config ARCH_MSM7X00A select MACH_TROUT if !MACH_HALIBUT select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_SMD_PKG3 config ARCH_MSM7X30 @@ -66,7 +66,7 @@ config ARCH_MSM7X30 select MSM_GPIOMUX select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_VIC config ARCH_QSD8X50 @@ -78,7 +78,7 @@ config ARCH_QSD8X50 select MSM_GPIOMUX select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_VIC endchoice @@ -153,7 +153,4 @@ config MSM_GPIOMUX config MSM_SCM bool -config MSM_TIMER - bool - endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 8327f603df4c..04b1bee941f5 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,4 +1,3 @@ -obj-$(CONFIG_MSM_TIMER) += timer.o obj-$(CONFIG_MSM_PROC_COMM) += clock.o obj-$(CONFIG_MSM_VIC) += irq-vic.o diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c deleted file mode 100644 index fd1644987534..000000000000 --- a/arch/arm/mach-msm/timer.c +++ /dev/null @@ -1,333 +0,0 @@ -/* - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "common.h" - -#define TIMER_MATCH_VAL 0x0000 -#define TIMER_COUNT_VAL 0x0004 -#define TIMER_ENABLE 0x0008 -#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1) -#define TIMER_ENABLE_EN BIT(0) -#define TIMER_CLEAR 0x000C -#define DGT_CLK_CTL 0x10 -#define DGT_CLK_CTL_DIV_4 0x3 -#define TIMER_STS_GPT0_CLR_PEND BIT(10) - -#define GPT_HZ 32768 - -#define MSM_DGT_SHIFT 5 - -static void __iomem *event_base; -static void __iomem *sts_base; - -static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - /* Stop the timer tick */ - if (evt->mode == CLOCK_EVT_MODE_ONESHOT) { - u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); - ctrl &= ~TIMER_ENABLE_EN; - writel_relaxed(ctrl, event_base + TIMER_ENABLE); - } - evt->event_handler(evt); - return IRQ_HANDLED; -} - -static int msm_timer_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); - - ctrl &= ~TIMER_ENABLE_EN; - writel_relaxed(ctrl, event_base + TIMER_ENABLE); - - writel_relaxed(ctrl, event_base + TIMER_CLEAR); - writel_relaxed(cycles, event_base + TIMER_MATCH_VAL); - - if (sts_base) - while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND) - cpu_relax(); - - writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE); - return 0; -} - -static void msm_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - u32 ctrl; - - ctrl = readl_relaxed(event_base + TIMER_ENABLE); - ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN); - - switch (mode) { - case CLOCK_EVT_MODE_RESUME: - case CLOCK_EVT_MODE_PERIODIC: - break; - case CLOCK_EVT_MODE_ONESHOT: - /* Timer is enabled in set_next_event */ - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - break; - } - writel_relaxed(ctrl, event_base + TIMER_ENABLE); -} - -static struct clock_event_device __percpu *msm_evt; - -static void __iomem *source_base; - -static notrace cycle_t msm_read_timer_count(struct clocksource *cs) -{ - return readl_relaxed(source_base + TIMER_COUNT_VAL); -} - -static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs) -{ - /* - * Shift timer count down by a constant due to unreliable lower bits - * on some targets. - */ - return msm_read_timer_count(cs) >> MSM_DGT_SHIFT; -} - -static struct clocksource msm_clocksource = { - .name = "dg_timer", - .rating = 300, - .read = msm_read_timer_count, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int msm_timer_irq; -static int msm_timer_has_ppi; - -static int msm_local_timer_setup(struct clock_event_device *evt) -{ - int cpu = smp_processor_id(); - int err; - - evt->irq = msm_timer_irq; - evt->name = "msm_timer"; - evt->features = CLOCK_EVT_FEAT_ONESHOT; - evt->rating = 200; - evt->set_mode = msm_timer_set_mode; - evt->set_next_event = msm_timer_set_next_event; - evt->cpumask = cpumask_of(cpu); - - clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff); - - if (msm_timer_has_ppi) { - enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING); - } else { - err = request_irq(evt->irq, msm_timer_interrupt, - IRQF_TIMER | IRQF_NOBALANCING | - IRQF_TRIGGER_RISING, "gp_timer", evt); - if (err) - pr_err("request_irq failed\n"); - } - - return 0; -} - -static void msm_local_timer_stop(struct clock_event_device *evt) -{ - evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); - disable_percpu_irq(evt->irq); -} - -static int msm_timer_cpu_notify(struct notifier_block *self, - unsigned long action, void *hcpu) -{ - /* - * Grab cpu pointer in each case to avoid spurious - * preemptible warnings - */ - switch (action & ~CPU_TASKS_FROZEN) { - case CPU_STARTING: - msm_local_timer_setup(this_cpu_ptr(msm_evt)); - break; - case CPU_DYING: - msm_local_timer_stop(this_cpu_ptr(msm_evt)); - break; - } - - return NOTIFY_OK; -} - -static struct notifier_block msm_timer_cpu_nb = { - .notifier_call = msm_timer_cpu_notify, -}; - -static u64 notrace msm_sched_clock_read(void) -{ - return msm_clocksource.read(&msm_clocksource); -} - -static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq, - bool percpu) -{ - struct clocksource *cs = &msm_clocksource; - int res = 0; - - msm_timer_irq = irq; - msm_timer_has_ppi = percpu; - - msm_evt = alloc_percpu(struct clock_event_device); - if (!msm_evt) { - pr_err("memory allocation failed for clockevents\n"); - goto err; - } - - if (percpu) - res = request_percpu_irq(irq, msm_timer_interrupt, - "gp_timer", msm_evt); - - if (res) { - pr_err("request_percpu_irq failed\n"); - } else { - res = register_cpu_notifier(&msm_timer_cpu_nb); - if (res) { - free_percpu_irq(irq, msm_evt); - goto err; - } - - /* Immediately configure the timer on the boot CPU */ - msm_local_timer_setup(__this_cpu_ptr(msm_evt)); - } - -err: - writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE); - res = clocksource_register_hz(cs, dgt_hz); - if (res) - pr_err("clocksource_register failed\n"); - sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz); -} - -#ifdef CONFIG_OF -static void __init msm_dt_timer_init(struct device_node *np) -{ - u32 freq; - int irq; - struct resource res; - u32 percpu_offset; - void __iomem *base; - void __iomem *cpu0_base; - - base = of_iomap(np, 0); - if (!base) { - pr_err("Failed to map event base\n"); - return; - } - - /* We use GPT0 for the clockevent */ - irq = irq_of_parse_and_map(np, 1); - if (irq <= 0) { - pr_err("Can't get irq\n"); - return; - } - - /* We use CPU0's DGT for the clocksource */ - if (of_property_read_u32(np, "cpu-offset", &percpu_offset)) - percpu_offset = 0; - - if (of_address_to_resource(np, 0, &res)) { - pr_err("Failed to parse DGT resource\n"); - return; - } - - cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res)); - if (!cpu0_base) { - pr_err("Failed to map source base\n"); - return; - } - - if (of_property_read_u32(np, "clock-frequency", &freq)) { - pr_err("Unknown frequency\n"); - return; - } - - event_base = base + 0x4; - sts_base = base + 0x88; - source_base = cpu0_base + 0x24; - freq /= 4; - writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL); - - msm_timer_init(freq, 32, irq, !!percpu_offset); -} -CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init); -CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init); -#endif - -static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source, - u32 sts) -{ - void __iomem *base; - - base = ioremap(addr, SZ_256); - if (!base) { - pr_err("Failed to map timer base\n"); - return -ENOMEM; - } - event_base = base + event; - source_base = base + source; - if (sts) - sts_base = base + sts; - - return 0; -} - -void __init msm7x01_timer_init(void) -{ - struct clocksource *cs = &msm_clocksource; - - if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0)) - return; - cs->read = msm_read_timer_count_shift; - cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)); - /* 600 KHz */ - msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7, - false); -} - -void __init msm7x30_timer_init(void) -{ - if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80)) - return; - msm_timer_init(24576000 / 4, 32, 1, false); -} - -void __init qsd8x50_timer_init(void) -{ - if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34)) - return; - msm_timer_init(19200000 / 4, 32, 7, false); -} -- cgit v1.2.3 From 8fc1b0f87d9fcc7f05873c70b3003328c3d7defa Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 21 Jan 2014 17:14:10 -0600 Subject: ARM: qcom: Split Qualcomm support into legacy and multiplatform Introduce a new mach-qcom that will support SoCs that intend to be multiplatform compatible while keeping mach-msm to legacy SoC/board support that will not transition over to multiplatform. As part of this, we move support for MSM8X60, MSM8960 and MSM8974 over to mach-qcom. Signed-off-by: Kumar Gala --- arch/arm/Kconfig | 7 +- arch/arm/Kconfig.debug | 2 +- arch/arm/Makefile | 1 + arch/arm/boot/dts/Makefile | 6 +- arch/arm/mach-msm/Kconfig | 45 +------ arch/arm/mach-msm/Makefile | 6 - arch/arm/mach-msm/board-dt.c | 41 ------ arch/arm/mach-msm/platsmp.c | 137 ------------------- arch/arm/mach-msm/scm-boot.c | 39 ------ arch/arm/mach-msm/scm-boot.h | 22 ---- arch/arm/mach-msm/scm.c | 299 ------------------------------------------ arch/arm/mach-msm/scm.h | 25 ---- arch/arm/mach-qcom/Kconfig | 33 +++++ arch/arm/mach-qcom/Makefile | 5 + arch/arm/mach-qcom/board.c | 40 ++++++ arch/arm/mach-qcom/platsmp.c | 137 +++++++++++++++++++ arch/arm/mach-qcom/scm-boot.c | 39 ++++++ arch/arm/mach-qcom/scm-boot.h | 22 ++++ arch/arm/mach-qcom/scm.c | 299 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-qcom/scm.h | 25 ++++ 20 files changed, 611 insertions(+), 619 deletions(-) delete mode 100644 arch/arm/mach-msm/board-dt.c delete mode 100644 arch/arm/mach-msm/platsmp.c delete mode 100644 arch/arm/mach-msm/scm-boot.c delete mode 100644 arch/arm/mach-msm/scm-boot.h delete mode 100644 arch/arm/mach-msm/scm.c delete mode 100644 arch/arm/mach-msm/scm.h create mode 100644 arch/arm/mach-qcom/Kconfig create mode 100644 arch/arm/mach-qcom/Makefile create mode 100644 arch/arm/mach-qcom/board.c create mode 100644 arch/arm/mach-qcom/platsmp.c create mode 100644 arch/arm/mach-qcom/scm-boot.c create mode 100644 arch/arm/mach-qcom/scm-boot.h create mode 100644 arch/arm/mach-qcom/scm.c create mode 100644 arch/arm/mach-qcom/scm.h (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e25419817791..f093f2030c1c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -657,9 +657,8 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MSM_NODT - bool "Qualcomm MSM" - select ARCH_MSM +config ARCH_MSM + bool "Qualcomm MSM (non-multiplatform)" select ARCH_REQUIRE_GPIOLIB select COMMON_CLK select GENERIC_CLOCKEVENTS @@ -1005,6 +1004,8 @@ source "arch/arm/plat-pxa/Kconfig" source "arch/arm/mach-mmp/Kconfig" +source "arch/arm/mach-qcom/Kconfig" + source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-rockchip/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 0531da8e5216..4491c7b05275 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -956,7 +956,7 @@ config DEBUG_STI_UART config DEBUG_MSM_UART bool - depends on ARCH_MSM + depends on ARCH_MSM || ARCH_QCOM config DEBUG_LL_INCLUDE string diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 08a9ef58d9c3..51e5bede657f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -180,6 +180,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell machine-$(CONFIG_ARCH_PXA) += pxa +machine-$(CONFIG_ARCH_QCOM) += qcom machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_ARCH_RPC) += rpc diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9d6a8b485e0..c9eaf1f87041 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -118,9 +118,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ts219-6282.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb -dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb \ - qcom-apq8074-dragonboard.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ armada-370-netgear-rn102.dtb \ @@ -232,6 +229,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ dra7-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-apq8074-dragonboard.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ ste-hrefprev60-stuib.dtb \ ste-hrefprev60-tvk.dtb \ diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 3c4eca71f976..a7f959e58c3d 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -1,50 +1,9 @@ -config ARCH_MSM - bool - -config ARCH_MSM_DT - bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7 - select ARCH_MSM - select ARCH_REQUIRE_GPIOLIB - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - help - Support for Qualcomm's devicetree based MSM systems. - if ARCH_MSM -menu "Qualcomm MSM SoC Selection" - depends on ARCH_MSM_DT - -config ARCH_MSM8X60 - bool "Enable support for MSM8X60" - select ARM_GIC - select CPU_V7 - select HAVE_SMP - select MSM_SCM if SMP - select CLKSRC_QCOM - -config ARCH_MSM8960 - bool "Enable support for MSM8960" - select ARM_GIC - select CPU_V7 - select HAVE_SMP - select MSM_SCM if SMP - select CLKSRC_QCOM - -config ARCH_MSM8974 - bool "Enable support for MSM8974" - select ARM_GIC - select CPU_V7 - select HAVE_ARM_ARCH_TIMER - select HAVE_SMP - select MSM_SCM if SMP - -endmenu - choice prompt "Qualcomm MSM SoC Type" default ARCH_MSM7X00A - depends on ARCH_MSM_NODT + depends on ARCH_MSM config ARCH_MSM7X00A bool "MSM7x00A / MSM7x01A" @@ -99,7 +58,7 @@ config MSM_VIC bool menu "Qualcomm MSM Board Type" - depends on ARCH_MSM_NODT + depends on ARCH_MSM config MACH_HALIBUT depends on ARCH_MSM diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 04b1bee941f5..27c078a568df 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -13,17 +13,11 @@ obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o -obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o - -CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) - -obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o -obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-msm/board-dt.c deleted file mode 100644 index 1f11d93e700e..000000000000 --- a/arch/arm/mach-msm/board-dt.c +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include - -#include -#include - -#include "common.h" - -static const char * const msm_dt_match[] __initconst = { - "qcom,msm8660-fluid", - "qcom,msm8660-surf", - "qcom,msm8960-cdp", - NULL -}; - -static const char * const apq8074_dt_match[] __initconst = { - "qcom,apq8074-dragonboard", - NULL -}; - -DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") - .smp = smp_ops(msm_smp_ops), - .dt_compat = msm_dt_match, -MACHINE_END - -DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)") - .dt_compat = apq8074_dt_match, -MACHINE_END diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c deleted file mode 100644 index 251a91eb102a..000000000000 --- a/arch/arm/mach-msm/platsmp.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "scm-boot.h" -#include "common.h" - -#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0 -#define SCSS_CPU1CORE_RESET 0xD80 -#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64 - -extern void secondary_startup(void); - -static DEFINE_SPINLOCK(boot_lock); - -#ifdef CONFIG_HOTPLUG_CPU -static void __ref msm_cpu_die(unsigned int cpu) -{ - wfi(); -} -#endif - -static inline int get_core_count(void) -{ - /* 1 + the PART[1:0] field of MIDR */ - return ((read_cpuid_id() >> 4) & 3) + 1; -} - -static void msm_secondary_init(unsigned int cpu) -{ - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -static void prepare_cold_cpu(unsigned int cpu) -{ - int ret; - ret = scm_set_boot_addr(virt_to_phys(secondary_startup), - SCM_FLAG_COLDBOOT_CPU1); - if (ret == 0) { - void __iomem *sc1_base_ptr; - sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2); - if (sc1_base_ptr) { - writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL); - writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET); - writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP); - iounmap(sc1_base_ptr); - } - } else - printk(KERN_DEBUG "Failed to set secondary core boot " - "address\n"); -} - -static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - static int cold_boot_done; - - /* Only need to bring cpu out of reset this way once */ - if (cold_boot_done == false) { - prepare_cold_cpu(cpu); - cold_boot_done = true; - } - - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return 0; -} - -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. The msm8x60 - * does not support the ARM SCU, so just set the possible cpu mask to - * NR_CPUS. - */ -static void __init msm_smp_init_cpus(void) -{ - unsigned int i, ncores = get_core_count(); - - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); -} - -static void __init msm_smp_prepare_cpus(unsigned int max_cpus) -{ -} - -struct smp_operations msm_smp_ops __initdata = { - .smp_init_cpus = msm_smp_init_cpus, - .smp_prepare_cpus = msm_smp_prepare_cpus, - .smp_secondary_init = msm_secondary_init, - .smp_boot_secondary = msm_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_die = msm_cpu_die, -#endif -}; diff --git a/arch/arm/mach-msm/scm-boot.c b/arch/arm/mach-msm/scm-boot.c deleted file mode 100644 index 45cee3e469a5..000000000000 --- a/arch/arm/mach-msm/scm-boot.c +++ /dev/null @@ -1,39 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include -#include - -#include "scm.h" -#include "scm-boot.h" - -/* - * Set the cold/warm boot address for one of the CPU cores. - */ -int scm_set_boot_addr(phys_addr_t addr, int flags) -{ - struct { - unsigned int flags; - phys_addr_t addr; - } cmd; - - cmd.addr = addr; - cmd.flags = flags; - return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR, - &cmd, sizeof(cmd), NULL, 0); -} -EXPORT_SYMBOL(scm_set_boot_addr); diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-msm/scm-boot.h deleted file mode 100644 index 7be32ff5d687..000000000000 --- a/arch/arm/mach-msm/scm-boot.h +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_SCM_BOOT_H -#define __MACH_SCM_BOOT_H - -#define SCM_BOOT_ADDR 0x1 -#define SCM_FLAG_COLDBOOT_CPU1 0x1 -#define SCM_FLAG_WARMBOOT_CPU1 0x2 -#define SCM_FLAG_WARMBOOT_CPU0 0x4 - -int scm_set_boot_addr(phys_addr_t addr, int flags); - -#endif diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c deleted file mode 100644 index c536fd6bf827..000000000000 --- a/arch/arm/mach-msm/scm.c +++ /dev/null @@ -1,299 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include "scm.h" - -/* Cache line size for msm8x60 */ -#define CACHELINESIZE 32 - -#define SCM_ENOMEM -5 -#define SCM_EOPNOTSUPP -4 -#define SCM_EINVAL_ADDR -3 -#define SCM_EINVAL_ARG -2 -#define SCM_ERROR -1 -#define SCM_INTERRUPTED 1 - -static DEFINE_MUTEX(scm_lock); - -/** - * struct scm_command - one SCM command buffer - * @len: total available memory for command and response - * @buf_offset: start of command buffer - * @resp_hdr_offset: start of response buffer - * @id: command to be executed - * @buf: buffer returned from scm_get_command_buffer() - * - * An SCM command is laid out in memory as follows: - * - * ------------------- <--- struct scm_command - * | command header | - * ------------------- <--- scm_get_command_buffer() - * | command buffer | - * ------------------- <--- struct scm_response and - * | response header | scm_command_to_response() - * ------------------- <--- scm_get_response_buffer() - * | response buffer | - * ------------------- - * - * There can be arbitrary padding between the headers and buffers so - * you should always use the appropriate scm_get_*_buffer() routines - * to access the buffers in a safe manner. - */ -struct scm_command { - u32 len; - u32 buf_offset; - u32 resp_hdr_offset; - u32 id; - u32 buf[0]; -}; - -/** - * struct scm_response - one SCM response buffer - * @len: total available memory for response - * @buf_offset: start of response data relative to start of scm_response - * @is_complete: indicates if the command has finished processing - */ -struct scm_response { - u32 len; - u32 buf_offset; - u32 is_complete; -}; - -/** - * alloc_scm_command() - Allocate an SCM command - * @cmd_size: size of the command buffer - * @resp_size: size of the response buffer - * - * Allocate an SCM command, including enough room for the command - * and response headers as well as the command and response buffers. - * - * Returns a valid &scm_command on success or %NULL if the allocation fails. - */ -static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size) -{ - struct scm_command *cmd; - size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size + - resp_size; - - cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); - if (cmd) { - cmd->len = len; - cmd->buf_offset = offsetof(struct scm_command, buf); - cmd->resp_hdr_offset = cmd->buf_offset + cmd_size; - } - return cmd; -} - -/** - * free_scm_command() - Free an SCM command - * @cmd: command to free - * - * Free an SCM command. - */ -static inline void free_scm_command(struct scm_command *cmd) -{ - kfree(cmd); -} - -/** - * scm_command_to_response() - Get a pointer to a scm_response - * @cmd: command - * - * Returns a pointer to a response for a command. - */ -static inline struct scm_response *scm_command_to_response( - const struct scm_command *cmd) -{ - return (void *)cmd + cmd->resp_hdr_offset; -} - -/** - * scm_get_command_buffer() - Get a pointer to a command buffer - * @cmd: command - * - * Returns a pointer to the command buffer of a command. - */ -static inline void *scm_get_command_buffer(const struct scm_command *cmd) -{ - return (void *)cmd->buf; -} - -/** - * scm_get_response_buffer() - Get a pointer to a response buffer - * @rsp: response - * - * Returns a pointer to a response buffer of a response. - */ -static inline void *scm_get_response_buffer(const struct scm_response *rsp) -{ - return (void *)rsp + rsp->buf_offset; -} - -static int scm_remap_error(int err) -{ - switch (err) { - case SCM_ERROR: - return -EIO; - case SCM_EINVAL_ADDR: - case SCM_EINVAL_ARG: - return -EINVAL; - case SCM_EOPNOTSUPP: - return -EOPNOTSUPP; - case SCM_ENOMEM: - return -ENOMEM; - } - return -EINVAL; -} - -static u32 smc(u32 cmd_addr) -{ - int context_id; - register u32 r0 asm("r0") = 1; - register u32 r1 asm("r1") = (u32)&context_id; - register u32 r2 asm("r2") = cmd_addr; - do { - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r0") - __asmeq("%2", "r1") - __asmeq("%3", "r2") -#ifdef REQUIRES_SEC - ".arch_extension sec\n" -#endif - "smc #0 @ switch to secure world\n" - : "=r" (r0) - : "r" (r0), "r" (r1), "r" (r2) - : "r3"); - } while (r0 == SCM_INTERRUPTED); - - return r0; -} - -static int __scm_call(const struct scm_command *cmd) -{ - int ret; - u32 cmd_addr = virt_to_phys(cmd); - - /* - * Flush the entire cache here so callers don't have to remember - * to flush the cache when passing physical addresses to the secure - * side in the buffer. - */ - flush_cache_all(); - ret = smc(cmd_addr); - if (ret < 0) - ret = scm_remap_error(ret); - - return ret; -} - -/** - * scm_call() - Send an SCM command - * @svc_id: service identifier - * @cmd_id: command identifier - * @cmd_buf: command buffer - * @cmd_len: length of the command buffer - * @resp_buf: response buffer - * @resp_len: length of the response buffer - * - * Sends a command to the SCM and waits for the command to finish processing. - */ -int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, - void *resp_buf, size_t resp_len) -{ - int ret; - struct scm_command *cmd; - struct scm_response *rsp; - - cmd = alloc_scm_command(cmd_len, resp_len); - if (!cmd) - return -ENOMEM; - - cmd->id = (svc_id << 10) | cmd_id; - if (cmd_buf) - memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len); - - mutex_lock(&scm_lock); - ret = __scm_call(cmd); - mutex_unlock(&scm_lock); - if (ret) - goto out; - - rsp = scm_command_to_response(cmd); - do { - u32 start = (u32)rsp; - u32 end = (u32)scm_get_response_buffer(rsp) + resp_len; - start &= ~(CACHELINESIZE - 1); - while (start < end) { - asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) - : "memory"); - start += CACHELINESIZE; - } - } while (!rsp->is_complete); - - if (resp_buf) - memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len); -out: - free_scm_command(cmd); - return ret; -} -EXPORT_SYMBOL(scm_call); - -u32 scm_get_version(void) -{ - int context_id; - static u32 version = -1; - register u32 r0 asm("r0"); - register u32 r1 asm("r1"); - - if (version != -1) - return version; - - mutex_lock(&scm_lock); - - r0 = 0x1 << 8; - r1 = (u32)&context_id; - do { - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r1") - __asmeq("%2", "r0") - __asmeq("%3", "r1") -#ifdef REQUIRES_SEC - ".arch_extension sec\n" -#endif - "smc #0 @ switch to secure world\n" - : "=r" (r0), "=r" (r1) - : "r" (r0), "r" (r1) - : "r2", "r3"); - } while (r0 == SCM_INTERRUPTED); - - version = r1; - mutex_unlock(&scm_lock); - - return version; -} -EXPORT_SYMBOL(scm_get_version); diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-msm/scm.h deleted file mode 100644 index 00b31ea58f29..000000000000 --- a/arch/arm/mach-msm/scm.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_SCM_H -#define __MACH_SCM_H - -#define SCM_SVC_BOOT 0x1 -#define SCM_SVC_PIL 0x2 - -extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, - void *resp_buf, size_t resp_len); - -#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) - -extern u32 scm_get_version(void); - -#endif diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig new file mode 100644 index 000000000000..a028be234334 --- /dev/null +++ b/arch/arm/mach-qcom/Kconfig @@ -0,0 +1,33 @@ +config ARCH_QCOM + bool "Qualcomm Support" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB + select ARM_GIC + select CLKSRC_OF + select GENERIC_CLOCKEVENTS + select HAVE_SMP + select QCOM_SCM if SMP + help + Support for Qualcomm's devicetree based systems. + +if ARCH_QCOM + +menu "Qualcomm SoC Selection" + +config ARCH_MSM8X60 + bool "Enable support for MSM8X60" + select CLKSRC_QCOM + +config ARCH_MSM8960 + bool "Enable support for MSM8960" + select CLKSRC_QCOM + +config ARCH_MSM8974 + bool "Enable support for MSM8974" + select HAVE_ARM_ARCH_TIMER + +endmenu + +config QCOM_SCM + bool + +endif diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile new file mode 100644 index 000000000000..8f756ae1ae31 --- /dev/null +++ b/arch/arm/mach-qcom/Makefile @@ -0,0 +1,5 @@ +obj-y := board.o +obj-$(CONFIG_SMP) += platsmp.o +obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o + +CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c new file mode 100644 index 000000000000..4529f6b222d3 --- /dev/null +++ b/arch/arm/mach-qcom/board.c @@ -0,0 +1,40 @@ +/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +#include +#include + +extern struct smp_operations msm_smp_ops; + +static const char * const qcom_dt_match[] __initconst = { + "qcom,msm8660-surf", + "qcom,msm8960-cdp", + NULL +}; + +static const char * const apq8074_dt_match[] __initconst = { + "qcom,apq8074-dragonboard", + NULL +}; + +DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)") + .smp = smp_ops(msm_smp_ops), + .dt_compat = qcom_dt_match, +MACHINE_END + +DT_MACHINE_START(APQ_DT, "Qualcomm (Flattened Device Tree)") + .dt_compat = apq8074_dt_match, +MACHINE_END diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c new file mode 100644 index 000000000000..67823a7bec0d --- /dev/null +++ b/arch/arm/mach-qcom/platsmp.c @@ -0,0 +1,137 @@ +/* + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2014 The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "scm-boot.h" + +#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0 +#define SCSS_CPU1CORE_RESET 0xD80 +#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64 + +extern void secondary_startup(void); + +static DEFINE_SPINLOCK(boot_lock); + +#ifdef CONFIG_HOTPLUG_CPU +static void __ref msm_cpu_die(unsigned int cpu) +{ + wfi(); +} +#endif + +static inline int get_core_count(void) +{ + /* 1 + the PART[1:0] field of MIDR */ + return ((read_cpuid_id() >> 4) & 3) + 1; +} + +static void msm_secondary_init(unsigned int cpu) +{ + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +static void prepare_cold_cpu(unsigned int cpu) +{ + int ret; + ret = scm_set_boot_addr(virt_to_phys(secondary_startup), + SCM_FLAG_COLDBOOT_CPU1); + if (ret == 0) { + void __iomem *sc1_base_ptr; + sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2); + if (sc1_base_ptr) { + writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL); + writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET); + writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP); + iounmap(sc1_base_ptr); + } + } else + printk(KERN_DEBUG "Failed to set secondary core boot " + "address\n"); +} + +static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + static int cold_boot_done; + + /* Only need to bring cpu out of reset this way once */ + if (cold_boot_done == false) { + prepare_cold_cpu(cpu); + cold_boot_done = true; + } + + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return 0; +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. The msm8x60 + * does not support the ARM SCU, so just set the possible cpu mask to + * NR_CPUS. + */ +static void __init msm_smp_init_cpus(void) +{ + unsigned int i, ncores = get_core_count(); + + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); +} + +static void __init msm_smp_prepare_cpus(unsigned int max_cpus) +{ +} + +struct smp_operations msm_smp_ops __initdata = { + .smp_init_cpus = msm_smp_init_cpus, + .smp_prepare_cpus = msm_smp_prepare_cpus, + .smp_secondary_init = msm_secondary_init, + .smp_boot_secondary = msm_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = msm_cpu_die, +#endif +}; diff --git a/arch/arm/mach-qcom/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c new file mode 100644 index 000000000000..45cee3e469a5 --- /dev/null +++ b/arch/arm/mach-qcom/scm-boot.c @@ -0,0 +1,39 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include +#include + +#include "scm.h" +#include "scm-boot.h" + +/* + * Set the cold/warm boot address for one of the CPU cores. + */ +int scm_set_boot_addr(phys_addr_t addr, int flags) +{ + struct { + unsigned int flags; + phys_addr_t addr; + } cmd; + + cmd.addr = addr; + cmd.flags = flags; + return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR, + &cmd, sizeof(cmd), NULL, 0); +} +EXPORT_SYMBOL(scm_set_boot_addr); diff --git a/arch/arm/mach-qcom/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h new file mode 100644 index 000000000000..7be32ff5d687 --- /dev/null +++ b/arch/arm/mach-qcom/scm-boot.h @@ -0,0 +1,22 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __MACH_SCM_BOOT_H +#define __MACH_SCM_BOOT_H + +#define SCM_BOOT_ADDR 0x1 +#define SCM_FLAG_COLDBOOT_CPU1 0x1 +#define SCM_FLAG_WARMBOOT_CPU1 0x2 +#define SCM_FLAG_WARMBOOT_CPU0 0x4 + +int scm_set_boot_addr(phys_addr_t addr, int flags); + +#endif diff --git a/arch/arm/mach-qcom/scm.c b/arch/arm/mach-qcom/scm.c new file mode 100644 index 000000000000..c536fd6bf827 --- /dev/null +++ b/arch/arm/mach-qcom/scm.c @@ -0,0 +1,299 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "scm.h" + +/* Cache line size for msm8x60 */ +#define CACHELINESIZE 32 + +#define SCM_ENOMEM -5 +#define SCM_EOPNOTSUPP -4 +#define SCM_EINVAL_ADDR -3 +#define SCM_EINVAL_ARG -2 +#define SCM_ERROR -1 +#define SCM_INTERRUPTED 1 + +static DEFINE_MUTEX(scm_lock); + +/** + * struct scm_command - one SCM command buffer + * @len: total available memory for command and response + * @buf_offset: start of command buffer + * @resp_hdr_offset: start of response buffer + * @id: command to be executed + * @buf: buffer returned from scm_get_command_buffer() + * + * An SCM command is laid out in memory as follows: + * + * ------------------- <--- struct scm_command + * | command header | + * ------------------- <--- scm_get_command_buffer() + * | command buffer | + * ------------------- <--- struct scm_response and + * | response header | scm_command_to_response() + * ------------------- <--- scm_get_response_buffer() + * | response buffer | + * ------------------- + * + * There can be arbitrary padding between the headers and buffers so + * you should always use the appropriate scm_get_*_buffer() routines + * to access the buffers in a safe manner. + */ +struct scm_command { + u32 len; + u32 buf_offset; + u32 resp_hdr_offset; + u32 id; + u32 buf[0]; +}; + +/** + * struct scm_response - one SCM response buffer + * @len: total available memory for response + * @buf_offset: start of response data relative to start of scm_response + * @is_complete: indicates if the command has finished processing + */ +struct scm_response { + u32 len; + u32 buf_offset; + u32 is_complete; +}; + +/** + * alloc_scm_command() - Allocate an SCM command + * @cmd_size: size of the command buffer + * @resp_size: size of the response buffer + * + * Allocate an SCM command, including enough room for the command + * and response headers as well as the command and response buffers. + * + * Returns a valid &scm_command on success or %NULL if the allocation fails. + */ +static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size) +{ + struct scm_command *cmd; + size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size + + resp_size; + + cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); + if (cmd) { + cmd->len = len; + cmd->buf_offset = offsetof(struct scm_command, buf); + cmd->resp_hdr_offset = cmd->buf_offset + cmd_size; + } + return cmd; +} + +/** + * free_scm_command() - Free an SCM command + * @cmd: command to free + * + * Free an SCM command. + */ +static inline void free_scm_command(struct scm_command *cmd) +{ + kfree(cmd); +} + +/** + * scm_command_to_response() - Get a pointer to a scm_response + * @cmd: command + * + * Returns a pointer to a response for a command. + */ +static inline struct scm_response *scm_command_to_response( + const struct scm_command *cmd) +{ + return (void *)cmd + cmd->resp_hdr_offset; +} + +/** + * scm_get_command_buffer() - Get a pointer to a command buffer + * @cmd: command + * + * Returns a pointer to the command buffer of a command. + */ +static inline void *scm_get_command_buffer(const struct scm_command *cmd) +{ + return (void *)cmd->buf; +} + +/** + * scm_get_response_buffer() - Get a pointer to a response buffer + * @rsp: response + * + * Returns a pointer to a response buffer of a response. + */ +static inline void *scm_get_response_buffer(const struct scm_response *rsp) +{ + return (void *)rsp + rsp->buf_offset; +} + +static int scm_remap_error(int err) +{ + switch (err) { + case SCM_ERROR: + return -EIO; + case SCM_EINVAL_ADDR: + case SCM_EINVAL_ARG: + return -EINVAL; + case SCM_EOPNOTSUPP: + return -EOPNOTSUPP; + case SCM_ENOMEM: + return -ENOMEM; + } + return -EINVAL; +} + +static u32 smc(u32 cmd_addr) +{ + int context_id; + register u32 r0 asm("r0") = 1; + register u32 r1 asm("r1") = (u32)&context_id; + register u32 r2 asm("r2") = cmd_addr; + do { + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r0") + __asmeq("%2", "r1") + __asmeq("%3", "r2") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0) + : "r" (r0), "r" (r1), "r" (r2) + : "r3"); + } while (r0 == SCM_INTERRUPTED); + + return r0; +} + +static int __scm_call(const struct scm_command *cmd) +{ + int ret; + u32 cmd_addr = virt_to_phys(cmd); + + /* + * Flush the entire cache here so callers don't have to remember + * to flush the cache when passing physical addresses to the secure + * side in the buffer. + */ + flush_cache_all(); + ret = smc(cmd_addr); + if (ret < 0) + ret = scm_remap_error(ret); + + return ret; +} + +/** + * scm_call() - Send an SCM command + * @svc_id: service identifier + * @cmd_id: command identifier + * @cmd_buf: command buffer + * @cmd_len: length of the command buffer + * @resp_buf: response buffer + * @resp_len: length of the response buffer + * + * Sends a command to the SCM and waits for the command to finish processing. + */ +int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, + void *resp_buf, size_t resp_len) +{ + int ret; + struct scm_command *cmd; + struct scm_response *rsp; + + cmd = alloc_scm_command(cmd_len, resp_len); + if (!cmd) + return -ENOMEM; + + cmd->id = (svc_id << 10) | cmd_id; + if (cmd_buf) + memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len); + + mutex_lock(&scm_lock); + ret = __scm_call(cmd); + mutex_unlock(&scm_lock); + if (ret) + goto out; + + rsp = scm_command_to_response(cmd); + do { + u32 start = (u32)rsp; + u32 end = (u32)scm_get_response_buffer(rsp) + resp_len; + start &= ~(CACHELINESIZE - 1); + while (start < end) { + asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) + : "memory"); + start += CACHELINESIZE; + } + } while (!rsp->is_complete); + + if (resp_buf) + memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len); +out: + free_scm_command(cmd); + return ret; +} +EXPORT_SYMBOL(scm_call); + +u32 scm_get_version(void) +{ + int context_id; + static u32 version = -1; + register u32 r0 asm("r0"); + register u32 r1 asm("r1"); + + if (version != -1) + return version; + + mutex_lock(&scm_lock); + + r0 = 0x1 << 8; + r1 = (u32)&context_id; + do { + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r1") + __asmeq("%2", "r0") + __asmeq("%3", "r1") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0), "=r" (r1) + : "r" (r0), "r" (r1) + : "r2", "r3"); + } while (r0 == SCM_INTERRUPTED); + + version = r1; + mutex_unlock(&scm_lock); + + return version; +} +EXPORT_SYMBOL(scm_get_version); diff --git a/arch/arm/mach-qcom/scm.h b/arch/arm/mach-qcom/scm.h new file mode 100644 index 000000000000..00b31ea58f29 --- /dev/null +++ b/arch/arm/mach-qcom/scm.h @@ -0,0 +1,25 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __MACH_SCM_H +#define __MACH_SCM_H + +#define SCM_SVC_BOOT 0x1 +#define SCM_SVC_PIL 0x2 + +extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, + void *resp_buf, size_t resp_len); + +#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) + +extern u32 scm_get_version(void); + +#endif -- cgit v1.2.3 From cf1e8f0cd665e2a9966d2bee4e11ecc0938ff166 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 4 Feb 2014 15:38:45 -0600 Subject: ARM: qcom: Rename various msm prefixed functions to qcom As mach-qcom will support a number of different Qualcomm SoC platforms we replace the msm prefix on function names with qcom to be a bit more generic. Signed-off-by: Kumar Gala --- arch/arm/mach-qcom/board.c | 4 ++-- arch/arm/mach-qcom/platsmp.c | 22 +++++++++++----------- 2 files changed, 13 insertions(+), 13 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c index 4529f6b222d3..830f69c3a3ce 100644 --- a/arch/arm/mach-qcom/board.c +++ b/arch/arm/mach-qcom/board.c @@ -17,7 +17,7 @@ #include #include -extern struct smp_operations msm_smp_ops; +extern struct smp_operations qcom_smp_ops; static const char * const qcom_dt_match[] __initconst = { "qcom,msm8660-surf", @@ -31,7 +31,7 @@ static const char * const apq8074_dt_match[] __initconst = { }; DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)") - .smp = smp_ops(msm_smp_ops), + .smp = smp_ops(qcom_smp_ops), .dt_compat = qcom_dt_match, MACHINE_END diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c index 67823a7bec0d..9c53ea70550d 100644 --- a/arch/arm/mach-qcom/platsmp.c +++ b/arch/arm/mach-qcom/platsmp.c @@ -30,7 +30,7 @@ extern void secondary_startup(void); static DEFINE_SPINLOCK(boot_lock); #ifdef CONFIG_HOTPLUG_CPU -static void __ref msm_cpu_die(unsigned int cpu) +static void __ref qcom_cpu_die(unsigned int cpu) { wfi(); } @@ -42,7 +42,7 @@ static inline int get_core_count(void) return ((read_cpuid_id() >> 4) & 3) + 1; } -static void msm_secondary_init(unsigned int cpu) +static void qcom_secondary_init(unsigned int cpu) { /* * Synchronise with the boot thread. @@ -70,7 +70,7 @@ static void prepare_cold_cpu(unsigned int cpu) "address\n"); } -static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int qcom_boot_secondary(unsigned int cpu, struct task_struct *idle) { static int cold_boot_done; @@ -108,7 +108,7 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) * does not support the ARM SCU, so just set the possible cpu mask to * NR_CPUS. */ -static void __init msm_smp_init_cpus(void) +static void __init qcom_smp_init_cpus(void) { unsigned int i, ncores = get_core_count(); @@ -122,16 +122,16 @@ static void __init msm_smp_init_cpus(void) set_cpu_possible(i, true); } -static void __init msm_smp_prepare_cpus(unsigned int max_cpus) +static void __init qcom_smp_prepare_cpus(unsigned int max_cpus) { } -struct smp_operations msm_smp_ops __initdata = { - .smp_init_cpus = msm_smp_init_cpus, - .smp_prepare_cpus = msm_smp_prepare_cpus, - .smp_secondary_init = msm_secondary_init, - .smp_boot_secondary = msm_boot_secondary, +struct smp_operations qcom_smp_ops __initdata = { + .smp_init_cpus = qcom_smp_init_cpus, + .smp_prepare_cpus = qcom_smp_prepare_cpus, + .smp_secondary_init = qcom_secondary_init, + .smp_boot_secondary = qcom_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU - .cpu_die = msm_cpu_die, + .cpu_die = qcom_cpu_die, #endif }; -- cgit v1.2.3