From 640356a48750ff9ef3303d85158ef9c42c3a18b6 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Tue, 17 May 2016 15:31:04 +0100 Subject: MIPS: Clear Status IPL field when using EIC When using an external interrupt controller (EIC) the interrupt mask bits in the cop0 Status register are reused for the Interrupt Priority Level, and any interrupts with a priority lower than the field will be ignored. Clear the field to 0 by default such that all interrupts are serviced. Without doing so we default to arbitrarily ignoring all or some subset of interrupts. Signed-off-by: Paul Burton Reviewed-by: Matt Redfearn Tested-by: Matt Redfearn Cc: Guenter Roeck Cc: Sergei Shtylyov Cc: Joe Perches Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13272/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/irq.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index 8eb5af805964..f25f7eab7307 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -54,6 +54,9 @@ void __init init_IRQ(void) for (i = 0; i < NR_IRQS; i++) irq_set_noprobe(i); + if (cpu_has_veic) + clear_c0_status(ST0_IM); + arch_init_irq(); } -- cgit v1.2.3 From d642e4e7b42f379fb9383ef1505f9d67895fb815 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Tue, 17 May 2016 15:31:05 +0100 Subject: MIPS: smp-cps: Clear Status IPL field when using EIC When using an external interrupt controller (EIC) the interrupt mask bits in the cop0 Status register are reused for the Interrupt Priority Level, and any interrupts with a priority lower than the field will be ignored. Clear the field to 0 by default such that all interrupts are serviced. Signed-off-by: Paul Burton Reviewed-by: Matt Redfearn Tested-by: Matt Redfearn Cc: Qais Yousef Cc: Thomas Gleixner Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13273/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/smp-cps.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c index 1061bd2e7e9c..4ed36f288d64 100644 --- a/arch/mips/kernel/smp-cps.c +++ b/arch/mips/kernel/smp-cps.c @@ -359,8 +359,12 @@ static void cps_init_secondary(void) BUG_ON(ident != mips_cm_vp_id(smp_processor_id())); } - change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 | - STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7); + if (cpu_has_veic) + clear_c0_status(ST0_IM); + else + change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | + STATUSF_IP4 | STATUSF_IP5 | + STATUSF_IP6 | STATUSF_IP7); } static void cps_smp_finish(void) -- cgit v1.2.3 From 0f2d988d231373bd53d5102bf40792552ed11d87 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Wed, 18 May 2016 00:08:49 +0100 Subject: MIPS: Fix incomplete separation of XPA CPU feature MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 12822570a29b ("MIPS: Separate XPA CPU feature into LPA and MVH") wasn't fully applied, possibly due to a conflict with commit f270d881fa55 ("MIPS: Detect MIPSr6 Virtual Processor support"). This left decode_config5() referring to the non-existent MIPS_CPU_XPA, which breaks the build when XPA is enabled: arch/mips/kernel/cpu-probe.c In function ‘decode_config5’: arch/mips/kernel/cpu-probe.c:838:17: error: ‘MIPS_CPU_XPA’ undeclared (first use in this function) c->options |= MIPS_CPU_XPA; ^ Apply the missing hunk, dropping the CONFIG_XPA ifdef and setting the MIPS_CPU_MVH option when Config5.MVH is set. Fixes: 12822570a29b ("MIPS: Separate XPA CPU feature into LPA and MVH") Signed-off-by: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Link: https://patchwork.linux-mips.org/patch/13112/ Patchwork: https://patchwork.linux-mips.org/patch/13277/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-probe.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 5ac5c3e23460..a88d44247cc8 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -833,10 +833,8 @@ static inline unsigned int decode_config5(struct cpuinfo_mips *c) c->options |= MIPS_CPU_MAAR; if (config5 & MIPS_CONF5_LLB) c->options |= MIPS_CPU_RW_LLB; -#ifdef CONFIG_XPA if (config5 & MIPS_CONF5_MVH) - c->options |= MIPS_CPU_XPA; -#endif + c->options |= MIPS_CPU_MVH; if (cpu_has_mips_r6 && (config5 & MIPS_CONF5_VP)) c->options |= MIPS_CPU_VP; -- cgit v1.2.3 From 5c33f8b2e54c519c42a30cfb34d9ecb70631bf83 Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Wed, 18 May 2016 17:12:35 +0100 Subject: MIPS: Add definitions of SegCtl registers and use them The SegCtl registers are standard for MIPSr3..MIPSr5. Add definitions of these registers and use them rather than constants Signed-off-by: Matt Redfearn Cc: Joshua Kinard Cc: James Hogan Cc: Chris Packham Cc: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13290/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-malta/kernel-entry-init.h | 6 +++--- arch/mips/include/asm/mipsregs.h | 3 +++ 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mach-malta/kernel-entry-init.h b/arch/mips/include/asm/mach-malta/kernel-entry-init.h index 0cf8622db27f..ab03eb3fadac 100644 --- a/arch/mips/include/asm/mach-malta/kernel-entry-init.h +++ b/arch/mips/include/asm/mach-malta/kernel-entry-init.h @@ -56,7 +56,7 @@ (0 << MIPS_SEGCFG_PA_SHIFT) | \ (1 << MIPS_SEGCFG_EU_SHIFT)) << 16) or t0, t2 - mtc0 t0, $5, 2 + mtc0 t0, CP0_SEGCTL0 /* SegCtl1 */ li t0, ((MIPS_SEGCFG_MUSUK << MIPS_SEGCFG_AM_SHIFT) | \ @@ -67,7 +67,7 @@ (0 << MIPS_SEGCFG_PA_SHIFT) | \ (1 << MIPS_SEGCFG_EU_SHIFT)) << 16) ins t0, t1, 16, 3 - mtc0 t0, $5, 3 + mtc0 t0, CP0_SEGCTL1 /* SegCtl2 */ li t0, ((MIPS_SEGCFG_MUSUK << MIPS_SEGCFG_AM_SHIFT) | \ @@ -77,7 +77,7 @@ (4 << MIPS_SEGCFG_PA_SHIFT) | \ (1 << MIPS_SEGCFG_EU_SHIFT)) << 16) or t0, t2 - mtc0 t0, $5, 4 + mtc0 t0, CP0_SEGCTL2 jal mips_ihb mfc0 t0, $16, 5 diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 25d01577d0b5..8471905f9288 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -48,6 +48,9 @@ #define CP0_CONF $3 #define CP0_CONTEXT $4 #define CP0_PAGEMASK $5 +#define CP0_SEGCTL0 $5, 2 +#define CP0_SEGCTL1 $5, 3 +#define CP0_SEGCTL2 $5, 4 #define CP0_WIRED $6 #define CP0_INFO $7 #define CP0_HWRENA $7, 0 -- cgit v1.2.3 From 63a8802f4fb60963d3f91b072f4d0424330ec0d4 Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Wed, 18 May 2016 17:12:36 +0100 Subject: MIPS: CPS: Copy EVA configuration when starting secondary VPs. When starting secondary VPEs which support EVA and the SegCtl registers, copy the memory segmentation configuration from the running VPE to ensure that all VPEs in the core have a consistent virtual memory map. The EVA configuration of secondary cores is dealt with when starting the core via the CM. Signed-off-by: Matt Redfearn Cc: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13291/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/cps-vec.S | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S index 51b98dc371b3..59476a607add 100644 --- a/arch/mips/kernel/cps-vec.S +++ b/arch/mips/kernel/cps-vec.S @@ -441,6 +441,21 @@ LEAF(mips_cps_boot_vpes) mfc0 t0, CP0_CONFIG mttc0 t0, CP0_CONFIG + /* + * Copy the EVA config from this VPE if the CPU supports it. + * CONFIG3 must exist to be running MT startup - just read it. + */ + mfc0 t0, CP0_CONFIG, 3 + and t0, t0, MIPS_CONF3_SC + beqz t0, 3f + nop + mfc0 t0, CP0_SEGCTL0 + mttc0 t0, CP0_SEGCTL0 + mfc0 t0, CP0_SEGCTL1 + mttc0 t0, CP0_SEGCTL1 + mfc0 t0, CP0_SEGCTL2 + mttc0 t0, CP0_SEGCTL2 +3: /* Ensure no software interrupts are pending */ mttc0 zero, CP0_CAUSE mttc0 zero, CP0_STATUS -- cgit v1.2.3 From f03984ca4fcfb356ee0765ae49a36288e6cdb165 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Wed, 18 May 2016 17:04:38 +0100 Subject: MIPS: Fix write_gc0_* macros when writing zero The versions of the __write_{32,64}bit_gc0_register() macros for when there is no virt support in the assembler use the "J" inline asm constraint to allow integer zero, but this needs to be accompanied by the "z" formatting string so that it turns into $0. Fix both macros to do this. Fixes: bad50d79255a ("MIPS: Fix VZ probe gas errors with binutils <2.24") Signed-off-by: James Hogan Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13289/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mipsregs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 8471905f9288..044219e741cc 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1773,7 +1773,7 @@ do { \ __asm__ __volatile__( \ ".set\tpush\n\t" \ ".set\tnoat\n\t" \ - "move\t$1, %0\n\t" \ + "move\t$1, %z0\n\t" \ "# mtgc0\t$1, $%1, %2\n\t" \ ".word\t(0x40610200 | %1 << 11 | %2)\n\t" \ ".set\tpop" \ @@ -1786,7 +1786,7 @@ do { \ __asm__ __volatile__( \ ".set\tpush\n\t" \ ".set\tnoat\n\t" \ - "move\t$1, %0\n\t" \ + "move\t$1, %z0\n\t" \ "# dmtgc0\t$1, $%1, %2\n\t" \ ".word\t(0x40610300 | %1 << 11 | %2)\n\t" \ ".set\tpop" \ -- cgit v1.2.3 From d7146829c9da24e285cb1b1f2156b5b3e2d40c07 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Thu, 19 May 2016 22:07:34 +0200 Subject: MIPS: ralink: fix MT7628 pinmux typos MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Álvaro Fernández Rojas Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13306/ Signed-off-by: Ralf Baechle --- arch/mips/ralink/mt7620.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c index 88b82fe21ae6..38d7d43a905b 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -223,9 +223,9 @@ static struct rt2880_pmx_func wled_an_grp_mt7628[] = { #define MT7628_GPIO_MODE_GPIO 0 static struct rt2880_pmx_group mt7628an_pinmux_data[] = { - GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK, + GRP_G("pwm1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM1), - GRP_G("pmw0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK, + GRP_G("pwm0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM0), GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART2), -- cgit v1.2.3 From 07b50db6e685172a41b9978aebffb2438166d9b6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Thu, 19 May 2016 22:07:35 +0200 Subject: MIPS: ralink: fix MT7628 wled_an pinmux gpio MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Álvaro Fernández Rojas Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13307/ Signed-off-by: Ralf Baechle --- arch/mips/ralink/mt7620.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c index 38d7d43a905b..3b73dacbaf4b 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -196,10 +196,10 @@ static struct rt2880_pmx_func wled_kn_grp_mt7628[] = { }; static struct rt2880_pmx_func wled_an_grp_mt7628[] = { - FUNC("rsvd", 3, 35, 1), - FUNC("rsvd", 2, 35, 1), - FUNC("gpio", 1, 35, 1), - FUNC("wled_an", 0, 35, 1), + FUNC("rsvd", 3, 44, 1), + FUNC("rsvd", 2, 44, 1), + FUNC("gpio", 1, 44, 1), + FUNC("wled_an", 0, 44, 1), }; #define MT7628_GPIO_MODE_MASK 0x3 -- cgit v1.2.3 From 2b436a351803f38d0c8ca9c26103472c8aaeb599 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Thu, 19 May 2016 22:07:36 +0200 Subject: MIPS: ralink: add MT7628 EPHY LEDs pinmux support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Álvaro Fernández Rojas Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13308/ Signed-off-by: Ralf Baechle --- arch/mips/ralink/mt7620.c | 100 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c index 3b73dacbaf4b..d40edda0ca3b 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -188,6 +188,41 @@ static struct rt2880_pmx_func gpio_grp_mt7628[] = { FUNC("gpio", 0, 11, 1), }; +static struct rt2880_pmx_func p4led_kn_grp_mt7628[] = { + FUNC("jtag", 3, 30, 1), + FUNC("util", 2, 30, 1), + FUNC("gpio", 1, 30, 1), + FUNC("p4led_kn", 0, 30, 1), +}; + +static struct rt2880_pmx_func p3led_kn_grp_mt7628[] = { + FUNC("jtag", 3, 31, 1), + FUNC("util", 2, 31, 1), + FUNC("gpio", 1, 31, 1), + FUNC("p3led_kn", 0, 31, 1), +}; + +static struct rt2880_pmx_func p2led_kn_grp_mt7628[] = { + FUNC("jtag", 3, 32, 1), + FUNC("util", 2, 32, 1), + FUNC("gpio", 1, 32, 1), + FUNC("p2led_kn", 0, 32, 1), +}; + +static struct rt2880_pmx_func p1led_kn_grp_mt7628[] = { + FUNC("jtag", 3, 33, 1), + FUNC("util", 2, 33, 1), + FUNC("gpio", 1, 33, 1), + FUNC("p1led_kn", 0, 33, 1), +}; + +static struct rt2880_pmx_func p0led_kn_grp_mt7628[] = { + FUNC("jtag", 3, 34, 1), + FUNC("rsvd", 2, 34, 1), + FUNC("gpio", 1, 34, 1), + FUNC("p0led_kn", 0, 34, 1), +}; + static struct rt2880_pmx_func wled_kn_grp_mt7628[] = { FUNC("rsvd", 3, 35, 1), FUNC("rsvd", 2, 35, 1), @@ -195,6 +230,41 @@ static struct rt2880_pmx_func wled_kn_grp_mt7628[] = { FUNC("wled_kn", 0, 35, 1), }; +static struct rt2880_pmx_func p4led_an_grp_mt7628[] = { + FUNC("jtag", 3, 39, 1), + FUNC("util", 2, 39, 1), + FUNC("gpio", 1, 39, 1), + FUNC("p4led_an", 0, 39, 1), +}; + +static struct rt2880_pmx_func p3led_an_grp_mt7628[] = { + FUNC("jtag", 3, 40, 1), + FUNC("util", 2, 40, 1), + FUNC("gpio", 1, 40, 1), + FUNC("p3led_an", 0, 40, 1), +}; + +static struct rt2880_pmx_func p2led_an_grp_mt7628[] = { + FUNC("jtag", 3, 41, 1), + FUNC("util", 2, 41, 1), + FUNC("gpio", 1, 41, 1), + FUNC("p2led_an", 0, 41, 1), +}; + +static struct rt2880_pmx_func p1led_an_grp_mt7628[] = { + FUNC("jtag", 3, 42, 1), + FUNC("util", 2, 42, 1), + FUNC("gpio", 1, 42, 1), + FUNC("p1led_an", 0, 42, 1), +}; + +static struct rt2880_pmx_func p0led_an_grp_mt7628[] = { + FUNC("jtag", 3, 43, 1), + FUNC("rsvd", 2, 43, 1), + FUNC("gpio", 1, 43, 1), + FUNC("p0led_an", 0, 43, 1), +}; + static struct rt2880_pmx_func wled_an_grp_mt7628[] = { FUNC("rsvd", 3, 44, 1), FUNC("rsvd", 2, 44, 1), @@ -204,7 +274,17 @@ static struct rt2880_pmx_func wled_an_grp_mt7628[] = { #define MT7628_GPIO_MODE_MASK 0x3 +#define MT7628_GPIO_MODE_P4LED_KN 58 +#define MT7628_GPIO_MODE_P3LED_KN 56 +#define MT7628_GPIO_MODE_P2LED_KN 54 +#define MT7628_GPIO_MODE_P1LED_KN 52 +#define MT7628_GPIO_MODE_P0LED_KN 50 #define MT7628_GPIO_MODE_WLED_KN 48 +#define MT7628_GPIO_MODE_P4LED_AN 42 +#define MT7628_GPIO_MODE_P3LED_AN 40 +#define MT7628_GPIO_MODE_P2LED_AN 38 +#define MT7628_GPIO_MODE_P1LED_AN 36 +#define MT7628_GPIO_MODE_P0LED_AN 34 #define MT7628_GPIO_MODE_WLED_AN 32 #define MT7628_GPIO_MODE_PWM1 30 #define MT7628_GPIO_MODE_PWM0 28 @@ -251,8 +331,28 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = { 1, MT7628_GPIO_MODE_GPIO), GRP_G("wled_an", wled_an_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_WLED_AN), + GRP_G("p0led_an", p0led_an_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_P0LED_AN), + GRP_G("p1led_an", p1led_an_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_P1LED_AN), + GRP_G("p2led_an", p2led_an_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_P2LED_AN), + GRP_G("p3led_an", p3led_an_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_P3LED_AN), + GRP_G("p4led_an", p4led_an_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_P4LED_AN), GRP_G("wled_kn", wled_kn_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_WLED_KN), + GRP_G("p0led_kn", p0led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_P0LED_KN), + GRP_G("p1led_kn", p1led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_P1LED_KN), + GRP_G("p2led_kn", p2led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_P2LED_KN), + GRP_G("p3led_kn", p3led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_P3LED_KN), + GRP_G("p4led_kn", p4led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_P4LED_KN), { 0 } }; -- cgit v1.2.3 From 9b987c4d74ba2ac695d28a155e3cf2a8a48d426f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 8 Nov 2013 12:44:31 +0300 Subject: MIPS: Lasat: A couple off by one bugs in picvue_proc.c These should be ">=" instead of ">" or we go past the end of the pvc_lines[] array. Signed-off-by: Dan Carpenter Cc: linux-mips@linux-mips.org Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6124/ Signed-off-by: Ralf Baechle --- arch/mips/lasat/picvue_proc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c index b42095880667..27533c109f92 100644 --- a/arch/mips/lasat/picvue_proc.c +++ b/arch/mips/lasat/picvue_proc.c @@ -43,7 +43,7 @@ static int pvc_line_proc_show(struct seq_file *m, void *v) { int lineno = *(int *)m->private; - if (lineno < 0 || lineno > PVC_NLINES) { + if (lineno < 0 || lineno >= PVC_NLINES) { printk(KERN_WARNING "proc_read_line: invalid lineno %d\n", lineno); return 0; } @@ -67,7 +67,7 @@ static ssize_t pvc_line_proc_write(struct file *file, const char __user *buf, char kbuf[PVC_LINELEN]; size_t len; - BUG_ON(lineno < 0 || lineno > PVC_NLINES); + BUG_ON(lineno < 0 || lineno >= PVC_NLINES); len = min(count, sizeof(kbuf) - 1); if (copy_from_user(kbuf, buf, len)) -- cgit v1.2.3 From 20430e7648c8acd1ab70bd056293c6c571ca8fc5 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 13:59:48 +0200 Subject: MIPS: hazards.h: Fix typo Signed-off-by: Andrea Gelmini Cc: chenhc@lemote.com Cc: james.hogan@imgtec.com Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13317/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/hazards.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h index dbb1eb6e284f..e0fecf206f2c 100644 --- a/arch/mips/include/asm/hazards.h +++ b/arch/mips/include/asm/hazards.h @@ -58,8 +58,8 @@ * address of a label as argument to inline assembler. Gas otoh has the * annoying difference between la and dla which are only usable for 32-bit * rsp. 64-bit code, so can't be used without conditional compilation. - * The alterantive is switching the assembler to 64-bit code which happens - * to work right even for 32-bit code ... + * The alternative is switching the assembler to 64-bit code which happens + * to work right even for 32-bit code... */ #define instruction_hazard() \ do { \ @@ -133,8 +133,8 @@ do { \ * address of a label as argument to inline assembler. Gas otoh has the * annoying difference between la and dla which are only usable for 32-bit * rsp. 64-bit code, so can't be used without conditional compilation. - * The alterantive is switching the assembler to 64-bit code which happens - * to work right even for 32-bit code ... + * The alternative is switching the assembler to 64-bit code which happens + * to work right even for 32-bit code... */ #define __instruction_hazard() \ do { \ -- cgit v1.2.3 From be9fde2eff7987067f58bea5d18d575335f9246f Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 13:59:56 +0200 Subject: MIPS: Alchemy: Fix typo Signed-off-by: Andrea Gelmini Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13318/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-au1x00/gpio-au1300.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h index ce02894271c6..d607d643b973 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h @@ -140,7 +140,7 @@ static inline int au1300_gpio_getinitlvl(unsigned int gpio) * Cases 1 and 3 are intended for boards which want to provide their own * GPIO namespace and -operations (i.e. for example you have 8 GPIOs * which are in part provided by spare Au1300 GPIO pins and in part by -* an external FPGA but you still want them to be accssible in linux +* an external FPGA but you still want them to be accessible in linux * as gpio0-7. The board can of course use the alchemy_gpioX_* functions * as required). */ -- cgit v1.2.3 From e904b94a06c77a4241df7ba239c3b5fd1ddb1809 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 14:00:04 +0200 Subject: MIPS: BCM63xx: Fix typo Signed-off-by: Andrea Gelmini Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13319/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h index 466fc85899f4..c4e856f27040 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h @@ -22,7 +22,7 @@ struct bcm63xx_enet_platform_data { int has_phy_interrupt; int phy_interrupt; - /* if has_phy, use autonegociated pause parameters or force + /* if has_phy, use autonegotiated pause parameters or force * them */ int pause_auto; int pause_rx; -- cgit v1.2.3 From 87fd4e2692a2add7726fb5a497c617c99071de34 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 14:00:11 +0200 Subject: MIPS: IP27: Fix typo Signed-off-by: Andrea Gelmini Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13320/ Patchwork: https://patchwork.linux-mips.org/patch/13335/ Patchwork: https://patchwork.linux-mips.org/patch/13336/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-ip27/dma-coherence.h | 2 +- arch/mips/pci/ops-bridge.c | 4 ++-- arch/mips/sgi-ip27/ip27-hubio.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h index 1daa64412569..04d862020ac9 100644 --- a/arch/mips/include/asm/mach-ip27/dma-coherence.h +++ b/arch/mips/include/asm/mach-ip27/dma-coherence.h @@ -64,7 +64,7 @@ static inline void plat_post_dma_flush(struct device *dev) static inline int plat_device_is_coherent(struct device *dev) { - return 1; /* IP27 non-cohernet mode is unsupported */ + return 1; /* IP27 non-coherent mode is unsupported */ } #endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */ diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c index 438319465cb4..57e1463fcd02 100644 --- a/arch/mips/pci/ops-bridge.c +++ b/arch/mips/pci/ops-bridge.c @@ -33,9 +33,9 @@ static u32 emulate_ioc3_cfg(int where, int size) * The Bridge ASIC supports both type 0 and type 1 access. Type 1 is * not really documented, so right now I can't write code which uses it. * Therefore we use type 0 accesses for now even though they won't work - * correcly for PCI-to-PCI bridges. + * correctly for PCI-to-PCI bridges. * - * The function is complicated by the ultimate brokeness of the IOC3 chip + * The function is complicated by the ultimate brokenness of the IOC3 chip * which is used in SGI systems. The IOC3 can only handle 32-bit PCI * accesses and does only decode parts of it's address space. */ diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c index 328ceb3c86ec..2abe016a0ffc 100644 --- a/arch/mips/sgi-ip27/ip27-hubio.c +++ b/arch/mips/sgi-ip27/ip27-hubio.c @@ -105,7 +105,7 @@ static void hub_setup_prb(nasid_t nasid, int prbnum, int credits) prb.iprb_ff = force_fire_and_forget ? 1 : 0; /* - * Set the appropriate number of PIO cresits for the widget. + * Set the appropriate number of PIO credits for the widget. */ prb.iprb_xtalkctr = credits; -- cgit v1.2.3 From dc3c27394d25360ac614c638fd505041792dd450 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 14:00:18 +0200 Subject: MIPS: IP32: Fix typo Signed-off-by: Andrea Gelmini Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13321/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-ip32/dma-coherence.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h index 0a0b0e2ced60..7bdf212587a0 100644 --- a/arch/mips/include/asm/mach-ip32/dma-coherence.h +++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h @@ -86,7 +86,7 @@ static inline void plat_post_dma_flush(struct device *dev) static inline int plat_device_is_coherent(struct device *dev) { - return 0; /* IP32 is non-cohernet */ + return 0; /* IP32 is non-coherent */ } #endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */ -- cgit v1.2.3 From fb0f6e8a2c0f01599bdf88a0ca146a44a0a58b5f Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 14:00:26 +0200 Subject: MIPS: Loongson64: Fix typo Signed-off-by: Andrea Gelmini Cc: chenhc@lemote.com Cc: viresh.kumar@linaro.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13322/ Patchwork: https://patchwork.linux-mips.org/patch/13332/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-loongson64/loongson_hwmon.h | 2 +- arch/mips/loongson64/loongson-3/hpet.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h b/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h index 4431fc54a36c..74230d0ca98b 100644 --- a/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h +++ b/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h @@ -24,7 +24,7 @@ struct temp_range { u8 level; }; -#define CONSTANT_SPEED_POLICY 0 /* at constent speed */ +#define CONSTANT_SPEED_POLICY 0 /* at constant speed */ #define STEP_SPEED_POLICY 1 /* use up/down arrays to describe policy */ #define KERNEL_HELPER_POLICY 2 /* kernel as a helper to fan control */ diff --git a/arch/mips/loongson64/loongson-3/hpet.c b/arch/mips/loongson64/loongson-3/hpet.c index a2631a52ca99..249039af66c4 100644 --- a/arch/mips/loongson64/loongson-3/hpet.c +++ b/arch/mips/loongson64/loongson-3/hpet.c @@ -212,7 +212,7 @@ static void hpet_setup(void) /* set hpet base address */ smbus_write(SMBUS_PCI_REGB4, HPET_ADDR); - /* enable decodeing of access to HPET MMIO*/ + /* enable decoding of access to HPET MMIO*/ smbus_enable(SMBUS_PCI_REG40, (1 << 28)); /* HPET irq enable */ -- cgit v1.2.3 From 7a448b57a6165e9ff93adb4440459c22cbfa73a9 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 14:00:33 +0200 Subject: MIPS: MT: Fix typo Signed-off-by: Andrea Gelmini Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13323/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mips_mt.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mips_mt.h b/arch/mips/include/asm/mips_mt.h index f6ba004a7711..aa4cca060e0a 100644 --- a/arch/mips/include/asm/mips_mt.h +++ b/arch/mips/include/asm/mips_mt.h @@ -1,5 +1,5 @@ /* - * Definitions and decalrations for MIPS MT support that are common between + * Definitions and declarations for MIPS MT support that are common between * the VSMP, and AP/SP kernel models. */ #ifndef __ASM_MIPS_MT_H -- cgit v1.2.3 From da66f8e637b1d9fbe285d9f3d1ea37e4b3029978 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 14:00:40 +0200 Subject: MIPS: Cavium: Fix typo Signed-off-by: Andrea Gelmini Cc: david.daney@cavium.com Cc: janne.huttunen@nokia.com Cc: aaro.koskinen@nokia.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13324/ Patchwork: https://patchwork.linux-mips.org/patch/13325/ Patchwork: https://patchwork.linux-mips.org/patch/13326/ Patchwork: https://patchwork.linux-mips.org/patch/13327/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/octeon/cvmx-cmd-queue.h | 2 +- arch/mips/include/asm/octeon/cvmx-helper-board.h | 2 +- arch/mips/include/asm/octeon/cvmx-ipd.h | 2 +- arch/mips/include/asm/octeon/cvmx-pow.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h index 8d05d9069823..a07a36f7d814 100644 --- a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h +++ b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h @@ -146,7 +146,7 @@ typedef struct { * This structure contains the global state of all command queues. * It is stored in a bootmem named block and shared by all * applications running on Octeon. Tickets are stored in a differnet - * cahce line that queue information to reduce the contention on the + * cache line that queue information to reduce the contention on the * ll/sc used to get a ticket. If this is not the case, the update * of queue state causes the ll/sc to fail quite often. */ diff --git a/arch/mips/include/asm/octeon/cvmx-helper-board.h b/arch/mips/include/asm/octeon/cvmx-helper-board.h index 893320375aef..cda93aee712c 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-board.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-board.h @@ -94,7 +94,7 @@ extern int cvmx_helper_board_get_mii_address(int ipd_port); * @phy_addr: The address of the PHY to program * @link_flags: * Flags to control autonegotiation. Bit 0 is autonegotiation - * enable/disable to maintain backware compatibility. + * enable/disable to maintain backward compatibility. * @link_info: Link speed to program. If the speed is zero and autonegotiation * is enabled, all possible negotiation speeds are advertised. * diff --git a/arch/mips/include/asm/octeon/cvmx-ipd.h b/arch/mips/include/asm/octeon/cvmx-ipd.h index e13490ebbb27..cbdc14b77435 100644 --- a/arch/mips/include/asm/octeon/cvmx-ipd.h +++ b/arch/mips/include/asm/octeon/cvmx-ipd.h @@ -39,7 +39,7 @@ enum cvmx_ipd_mode { CVMX_IPD_OPC_MODE_STT = 0LL, /* All blocks DRAM, not cached in L2 */ - CVMX_IPD_OPC_MODE_STF = 1LL, /* All bloccks into L2 */ + CVMX_IPD_OPC_MODE_STF = 1LL, /* All blocks into L2 */ CVMX_IPD_OPC_MODE_STF1_STT = 2LL, /* 1st block L2, rest DRAM */ CVMX_IPD_OPC_MODE_STF2_STT = 3LL /* 1st, 2nd blocks L2, rest DRAM */ }; diff --git a/arch/mips/include/asm/octeon/cvmx-pow.h b/arch/mips/include/asm/octeon/cvmx-pow.h index 51531563f8dc..410bb70e5aac 100644 --- a/arch/mips/include/asm/octeon/cvmx-pow.h +++ b/arch/mips/include/asm/octeon/cvmx-pow.h @@ -2051,7 +2051,7 @@ static inline void cvmx_pow_tag_sw_desched(uint32_t tag, } /** - * Descchedules the current work queue entry. + * Deschedules the current work queue entry. * * @no_sched: no schedule flag value to be set on the work queue * entry. If this is set the entry will not be -- cgit v1.2.3 From a9e7e4518c5152023b9ddebf1d47ee0473f3fab4 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 14:01:12 +0200 Subject: MIPS: IP22/IP28: Fix typo Signed-off-by: Andrea Gelmini Cc: adam.buchbinder@gmail.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13328/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/sgi/hpc3.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/sgi/hpc3.h b/arch/mips/include/asm/sgi/hpc3.h index 4a9c99050c13..c0e3dc0293a7 100644 --- a/arch/mips/include/asm/sgi/hpc3.h +++ b/arch/mips/include/asm/sgi/hpc3.h @@ -39,7 +39,7 @@ struct hpc3_pbus_dmacregs { volatile u32 pbdma_dptr; /* pbus dma channel desc ptr */ u32 _unused0[0x1000/4 - 2]; /* padding */ volatile u32 pbdma_ctrl; /* pbus dma channel control register has - * copletely different meaning for read + * completely different meaning for read * compared with write */ /* read */ #define HPC3_PDMACTRL_INT 0x00000001 /* interrupt (cleared after read) */ -- cgit v1.2.3 From f5be47f5a4b74ca4bc58348a0b2a6aa4c8cba1be Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 14:01:20 +0200 Subject: MIPS: R6: Fix typo Signed-off-by: Andrea Gelmini Cc: macro@imgtec.com Cc: paul.burton@imgtec.com Cc: Leonid.Yegoshin@imgtec.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13329/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/mips-r2-to-r6-emul.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c index 625ee770b1aa..58681aea50a1 100644 --- a/arch/mips/kernel/mips-r2-to-r6-emul.c +++ b/arch/mips/kernel/mips-r2-to-r6-emul.c @@ -2202,7 +2202,7 @@ fpu_emul: } /* - * Lets not return to userland just yet. It's constly and + * Lets not return to userland just yet. It's costly and * it's likely we have more R2 instructions to emulate */ if (!err && (pass++ < MIPS_R2_EMUL_TOTAL_PASS)) { -- cgit v1.2.3 From a90c59e636da2352ab9d2f51bf0d6c9b2eef3c13 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 14:01:27 +0200 Subject: MIPS: kernel: Fix typo Signed-off-by: Andrea Gelmini Cc: paul.burton@imgtec.com Cc: macro@imgtec.com Cc: james.hogan@imgtec.com Cc: jslaby@suse.cz Cc: adam.buchbinder@gmail.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13330/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index a6b3dc54260a..866d083f2d81 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -349,7 +349,7 @@ static int get_frame_info(struct mips_frame_info *info) return 0; if (info->pc_offset < 0) /* leaf */ return 1; - /* prologue seems boggus... */ + /* prologue seems bogus... */ err: return -1; } -- cgit v1.2.3 From 209b877833ef256cae4091763f32635ba0b79fdc Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 14:01:36 +0200 Subject: MIPS: lib: Fix typo Signed-off-by: Andrea Gelmini Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13331/ Signed-off-by: Ralf Baechle --- arch/mips/lib/memcpy.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S index 9245e1705e69..6c303a94a196 100644 --- a/arch/mips/lib/memcpy.S +++ b/arch/mips/lib/memcpy.S @@ -256,7 +256,7 @@ /* * Macro to build the __copy_user common code - * Arguements: + * Arguments: * mode : LEGACY_MODE or EVA_MODE * from : Source operand. USEROP or KERNELOP * to : Destination operand. USEROP or KERNELOP -- cgit v1.2.3 From e7e3346cc64fff306694bdc41908283d195339c1 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 14:01:51 +0200 Subject: MIPS: math-emu: Fix typo Signed-off-by: Andrea Gelmini Cc: macro@imgtec.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13333/ Signed-off-by: Ralf Baechle --- arch/mips/math-emu/dsemul.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c index d4ceacd4fa12..47074887e64c 100644 --- a/arch/mips/math-emu/dsemul.c +++ b/arch/mips/math-emu/dsemul.c @@ -8,7 +8,7 @@ #include "ieee754.h" /* - * Emulate the arbritrary instruction ir at xcp->cp0_epc. Required when + * Emulate the arbitrary instruction ir at xcp->cp0_epc. Required when * we have to emulate the instruction in a COP1 branch delay slot. Do * not change cp0_epc due to the instruction * @@ -88,7 +88,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc) fr = (struct emuframe __user *) ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7); - /* Verify that the stack pointer is not competely insane */ + /* Verify that the stack pointer is not completely insane */ if (unlikely(!access_ok(VERIFY_WRITE, fr, sizeof(struct emuframe)))) return SIGBUS; -- cgit v1.2.3 From 5004614b34e8af205356f557ef1fec4a710bba20 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 14:01:57 +0200 Subject: MIPS: oprofile: Fix typo Signed-off-by: Andrea Gelmini Cc: rric@kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Cc: oprofile-list@lists.sf.net Patchwork: https://patchwork.linux-mips.org/patch/13334/ Signed-off-by: Ralf Baechle --- arch/mips/oprofile/op_impl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h index 7c2da27ece04..a4e758a39af4 100644 --- a/arch/mips/oprofile/op_impl.h +++ b/arch/mips/oprofile/op_impl.h @@ -24,7 +24,7 @@ struct op_counter_config { unsigned long unit_mask; }; -/* Per-architecture configury and hooks. */ +/* Per-architecture configure and hooks. */ struct op_mips_model { void (*reg_setup) (struct op_counter_config *); void (*cpu_setup) (void *dummy); -- cgit v1.2.3 From a320a1156ac987ae45d2a922f8f7355d67658e83 Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 14:02:26 +0200 Subject: MIPS: VR41xx: Fix typo Signed-off-by: Andrea Gelmini Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13338/ Signed-off-by: Ralf Baechle --- arch/mips/vr41xx/common/cmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c index 05302bfdd114..89bac9885695 100644 --- a/arch/mips/vr41xx/common/cmu.c +++ b/arch/mips/vr41xx/common/cmu.c @@ -3,7 +3,7 @@ * * Copyright (C) 2001-2002 MontaVista Software Inc. * Author: Yoichi Yuasa - * Copuright (C) 2003-2005 Yoichi Yuasa + * Copyright (C) 2003-2005 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by -- cgit v1.2.3 From 4939788eb8559754a120531c49ffa96bb30fee06 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 22 May 2016 00:39:18 +0200 Subject: MIPS: Spelling fix lets -> let's As noticed by Sergei in the discussion of Andrea Gelmini's patch series. Signed-off-by: Ralf Baechle Reported-by: Sergei Shtylyov --- arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h | 2 +- arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h | 2 +- arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 2 +- arch/mips/kernel/branch.c | 4 ++-- arch/mips/kernel/elf.c | 2 +- arch/mips/kernel/mips-r2-to-r6-emul.c | 2 +- arch/mips/sgi-ip27/ip27-nmi.c | 2 +- arch/mips/sgi-ip27/ip27-xtalk.c | 2 +- arch/mips/sni/rm200.c | 2 +- 9 files changed, 10 insertions(+), 10 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index ca8077afac4a..456ddba152c4 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -100,7 +100,7 @@ typedef volatile struct au1xxx_ddma_desc { u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */ /* * First 32 bytes are HW specific!!! - * Lets have some SW data following -- make sure it's 32 bytes. + * Let's have some SW data following -- make sure it's 32 bytes. */ u32 sw_status; u32 sw_context; diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h index 7023883ca50f..8e9b022c3594 100644 --- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h +++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h @@ -22,7 +22,7 @@ /* * during early_printk no ioremap possible at this early stage - * lets use KSEG1 instead + * let's use KSEG1 instead */ #define LTQ_ASC0_BASE_ADDR 0x1E100C00 #define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC0_BASE_ADDR) diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h index f87310755319..17b41bb5991f 100644 --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h @@ -75,7 +75,7 @@ extern __iomem void *ltq_cgu_membase; /* * during early_printk no ioremap is possible - * lets use KSEG1 instead + * let's use KSEG1 instead */ #define LTQ_ASC1_BASE_ADDR 0x1E100C00 #define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC1_BASE_ADDR) diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c index ceca6cc41b2b..6dc3f1fdaccc 100644 --- a/arch/mips/kernel/branch.c +++ b/arch/mips/kernel/branch.c @@ -481,7 +481,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, /* * OK we are here either because we hit a NAL * instruction or because we are emulating an - * old bltzal{,l} one. Lets figure out what the + * old bltzal{,l} one. Let's figure out what the * case really is. */ if (!insn.i_format.rs) { @@ -515,7 +515,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, /* * OK we are here either because we hit a BAL * instruction or because we are emulating an - * old bgezal{,l} one. Lets figure out what the + * old bgezal{,l} one. Let's figure out what the * case really is. */ if (!insn.i_format.rs) { diff --git a/arch/mips/kernel/elf.c b/arch/mips/kernel/elf.c index c3c234dc0c07..891f5ee63983 100644 --- a/arch/mips/kernel/elf.c +++ b/arch/mips/kernel/elf.c @@ -88,7 +88,7 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf, elf32 = ehdr->e32.e_ident[EI_CLASS] == ELFCLASS32; flags = elf32 ? ehdr->e32.e_flags : ehdr->e64.e_flags; - /* Lets see if this is an O32 ELF */ + /* Let's see if this is an O32 ELF */ if (elf32) { if (flags & EF_MIPS_FP64) { /* diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c index 58681aea50a1..7ff2a557f4aa 100644 --- a/arch/mips/kernel/mips-r2-to-r6-emul.c +++ b/arch/mips/kernel/mips-r2-to-r6-emul.c @@ -2202,7 +2202,7 @@ fpu_emul: } /* - * Lets not return to userland just yet. It's costly and + * Let's not return to userland just yet. It's costly and * it's likely we have more R2 instructions to emulate */ if (!err && (pass++ < MIPS_R2_EMUL_TOTAL_PASS)) { diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c index a2358b44420c..cfceaea92724 100644 --- a/arch/mips/sgi-ip27/ip27-nmi.c +++ b/arch/mips/sgi-ip27/ip27-nmi.c @@ -23,7 +23,7 @@ typedef unsigned long machreg_t; static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED; /* - * Lets see what else we need to do here. Set up sp, gp? + * Let's see what else we need to do here. Set up sp, gp? */ void nmi_dump(void) { diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c index 20f582a2137a..4fe5678ba74d 100644 --- a/arch/mips/sgi-ip27/ip27-xtalk.c +++ b/arch/mips/sgi-ip27/ip27-xtalk.c @@ -67,7 +67,7 @@ static int xbow_probe(nasid_t nasid) return -ENODEV; /* - * Okay, here's a xbow. Lets arbitrate and find + * Okay, here's a xbow. Let's arbitrate and find * out if we should initialize it. Set enabled * hub connected at highest or lowest widget as * master. diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c index a046b302623e..160b88000b4b 100644 --- a/arch/mips/sni/rm200.c +++ b/arch/mips/sni/rm200.c @@ -263,7 +263,7 @@ spurious_8259A_irq: static int spurious_irq_mask; /* * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] + * let's ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { printk(KERN_DEBUG -- cgit v1.2.3 From 0dfa1c12f300d06f95d861d2718ef198e37473a6 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 20 May 2016 23:28:37 +0100 Subject: MIPS: Add inline asm encoding helpers To allow simplification of macros which use inline assembly to explicitly encode instructions, add a few simple abstractions to mipsregs.h which expand to specific microMIPS or normal MIPS encodings depending on what type of kernel is being built: _ASM_INSN_IF_MIPS(_enc) : Emit a 32bit MIPS instruction if microMIPS is not enabled. _ASM_INSN32_IF_MM(_enc) : Emit a 32bit microMIPS instruction if enabled. _ASM_INSN16_IF_MM(_enc) : Emit a 16bit microMIPS instruction if enabled. The macros can be used one after another since the MIPS / microMIPS macros are mutually exclusive, for example: __asm__ __volatile__( ".set push\n\t" ".set noat\n\t" "# mfgc0 $1, $%1, %2\n\t" _ASM_INSN_IF_MIPS(0x40610000 | %1 << 11 | %2) _ASM_INSN32_IF_MM(0x002004fc | %1 << 16 | %2 << 11) "move %0, $1\n\t" ".set pop" : "=r" (__res) : "i" (source), "i" (sel)); Signed-off-by: James Hogan Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13310/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mipsregs.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 044219e741cc..1ce2c72ab88d 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1048,6 +1048,33 @@ static inline int mm_insn_16bit(u16 insn) return (opcode >= 1 && opcode <= 3) ? 1 : 0; } +/* + * Helper macros for generating raw instruction encodings in inline asm. + */ +#ifdef CONFIG_CPU_MICROMIPS +#define _ASM_INSN16_IF_MM(_enc) \ + ".insn\n\t" \ + ".hword (" #_enc ")\n\t" +#define _ASM_INSN32_IF_MM(_enc) \ + ".insn\n\t" \ + ".hword ((" #_enc ") >> 16)\n\t" \ + ".hword ((" #_enc ") & 0xffff)\n\t" +#else +#define _ASM_INSN_IF_MIPS(_enc) \ + ".insn\n\t" \ + ".word (" #_enc ")\n\t" +#endif + +#ifndef _ASM_INSN16_IF_MM +#define _ASM_INSN16_IF_MM(_enc) +#endif +#ifndef _ASM_INSN32_IF_MM +#define _ASM_INSN32_IF_MM(_enc) +#endif +#ifndef _ASM_INSN_IF_MIPS +#define _ASM_INSN_IF_MIPS(_enc) +#endif + /* * TLB Invalidate Flush */ -- cgit v1.2.3 From 1c48a177351ba8cbf6871f035496fce0e11d8fa3 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 20 May 2016 23:28:38 +0100 Subject: MIPS: Add missing VZ accessor microMIPS encodings Toolchains may be used which support microMIPS but not VZ instructions (i.e. binutis 2.22 & 2.23), so extend the explicitly encoded versions of the guest COP0 register & guest TLB access macros to support microMIPS encodings too, using the new macros. This prevents non-microMIPS instructions being executed in microMIPS mode during CPU probe on cores supporting VZ (e.g. M5150), which cause reserved instruction exceptions early during boot. Fixes: bad50d79255a ("MIPS: Fix VZ probe gas errors with binutils <2.24") Signed-off-by: James Hogan Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13311/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mipsregs.h | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 1ce2c72ab88d..98b289af6245 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1773,7 +1773,8 @@ do { \ ".set\tpush\n\t" \ ".set\tnoat\n\t" \ "# mfgc0\t$1, $%1, %2\n\t" \ - ".word\t(0x40610000 | %1 << 11 | %2)\n\t" \ + _ASM_INSN_IF_MIPS(0x40610000 | %1 << 11 | %2) \ + _ASM_INSN32_IF_MM(0x002004fc | %1 << 16 | %2 << 11) \ "move\t%0, $1\n\t" \ ".set\tpop" \ : "=r" (__res) \ @@ -1787,7 +1788,8 @@ do { \ ".set\tpush\n\t" \ ".set\tnoat\n\t" \ "# dmfgc0\t$1, $%1, %2\n\t" \ - ".word\t(0x40610100 | %1 << 11 | %2)\n\t" \ + _ASM_INSN_IF_MIPS(0x40610100 | %1 << 11 | %2) \ + _ASM_INSN32_IF_MM(0x582004fc | %1 << 16 | %2 << 11) \ "move\t%0, $1\n\t" \ ".set\tpop" \ : "=r" (__res) \ @@ -1802,7 +1804,8 @@ do { \ ".set\tnoat\n\t" \ "move\t$1, %z0\n\t" \ "# mtgc0\t$1, $%1, %2\n\t" \ - ".word\t(0x40610200 | %1 << 11 | %2)\n\t" \ + _ASM_INSN_IF_MIPS(0x40610200 | %1 << 11 | %2) \ + _ASM_INSN32_IF_MM(0x002006fc | %1 << 16 | %2 << 11) \ ".set\tpop" \ : : "Jr" ((unsigned int)(value)), \ "i" (register), "i" (sel)); \ @@ -1815,7 +1818,8 @@ do { \ ".set\tnoat\n\t" \ "move\t$1, %z0\n\t" \ "# dmtgc0\t$1, $%1, %2\n\t" \ - ".word\t(0x40610300 | %1 << 11 | %2)\n\t" \ + _ASM_INSN_IF_MIPS(0x40610300 | %1 << 11 | %2) \ + _ASM_INSN32_IF_MM(0x582006fc | %1 << 16 | %2 << 11) \ ".set\tpop" \ : : "Jr" (value), \ "i" (register), "i" (sel)); \ @@ -2586,28 +2590,32 @@ static inline void guest_tlb_probe(void) { __asm__ __volatile__( "# tlbgp\n\t" - ".word 0x42000010"); + _ASM_INSN_IF_MIPS(0x42000010) + _ASM_INSN32_IF_MM(0x0000017c)); } static inline void guest_tlb_read(void) { __asm__ __volatile__( "# tlbgr\n\t" - ".word 0x42000009"); + _ASM_INSN_IF_MIPS(0x42000009) + _ASM_INSN32_IF_MM(0x0000117c)); } static inline void guest_tlb_write_indexed(void) { __asm__ __volatile__( "# tlbgwi\n\t" - ".word 0x4200000a"); + _ASM_INSN_IF_MIPS(0x4200000a) + _ASM_INSN32_IF_MM(0x0000217c)); } static inline void guest_tlb_write_random(void) { __asm__ __volatile__( "# tlbgwr\n\t" - ".word 0x4200000e"); + _ASM_INSN_IF_MIPS(0x4200000e) + _ASM_INSN32_IF_MM(0x0000317c)); } /* @@ -2617,7 +2625,8 @@ static inline void guest_tlbinvf(void) { __asm__ __volatile__( "# tlbginvf\n\t" - ".word 0x4200000c"); + _ASM_INSN_IF_MIPS(0x4200000c) + _ASM_INSN32_IF_MM(0x0000517c)); } #endif /* !TOOLCHAIN_SUPPORTS_VIRT */ -- cgit v1.2.3 From 6e1b29c3094688b6803fa1f9d5da676a7d0fbff9 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 20 May 2016 23:28:39 +0100 Subject: MIPS: Fix little endian microMIPS MSA encodings When the toolchain doesn't support MSA we encode MSA instructions explicitly in assembly. Unfortunately we use .word for both MIPS and microMIPS encodings which is wrong, since 32-bit microMIPS instructions are made up from a pair of halfwords. - The most significant halfword always comes first, so for little endian builds the halves will be emitted in the wrong order. - 32-bit alignment isn't guaranteed, so the assembler may insert a 16-bit nop instruction to pad the instruction stream to a 32-bit boundary. Use the new instruction encoding macros to encode microMIPS MSA instructions correctly. Fixes: d96cc3d1ec5d ("MIPS: Add microMIPS MSA support.") Signed-off-by: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13312/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/asmmacro.h | 99 ++++++++++++++++++++-------------------- arch/mips/include/asm/msa.h | 21 ++++----- 2 files changed, 58 insertions(+), 62 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h index 6741673c92ca..56584a659183 100644 --- a/arch/mips/include/asm/asmmacro.h +++ b/arch/mips/include/asm/asmmacro.h @@ -19,6 +19,28 @@ #include #endif +/* + * Helper macros for generating raw instruction encodings. + */ +#ifdef CONFIG_CPU_MICROMIPS + .macro insn32_if_mm enc + .insn + .hword ((\enc) >> 16) + .hword ((\enc) & 0xffff) + .endm + + .macro insn_if_mips enc + .endm +#else + .macro insn32_if_mm enc + .endm + + .macro insn_if_mips enc + .insn + .word (\enc) + .endm +#endif + #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) .macro local_irq_enable reg=t0 ei @@ -341,38 +363,6 @@ .endm #else -#ifdef CONFIG_CPU_MICROMIPS -#define CFC_MSA_INSN 0x587e0056 -#define CTC_MSA_INSN 0x583e0816 -#define LDB_MSA_INSN 0x58000807 -#define LDH_MSA_INSN 0x58000817 -#define LDW_MSA_INSN 0x58000827 -#define LDD_MSA_INSN 0x58000837 -#define STB_MSA_INSN 0x5800080f -#define STH_MSA_INSN 0x5800081f -#define STW_MSA_INSN 0x5800082f -#define STD_MSA_INSN 0x5800083f -#define COPY_SW_MSA_INSN 0x58b00056 -#define COPY_SD_MSA_INSN 0x58b80056 -#define INSERT_W_MSA_INSN 0x59300816 -#define INSERT_D_MSA_INSN 0x59380816 -#else -#define CFC_MSA_INSN 0x787e0059 -#define CTC_MSA_INSN 0x783e0819 -#define LDB_MSA_INSN 0x78000820 -#define LDH_MSA_INSN 0x78000821 -#define LDW_MSA_INSN 0x78000822 -#define LDD_MSA_INSN 0x78000823 -#define STB_MSA_INSN 0x78000824 -#define STH_MSA_INSN 0x78000825 -#define STW_MSA_INSN 0x78000826 -#define STD_MSA_INSN 0x78000827 -#define COPY_SW_MSA_INSN 0x78b00059 -#define COPY_SD_MSA_INSN 0x78b80059 -#define INSERT_W_MSA_INSN 0x79300819 -#define INSERT_D_MSA_INSN 0x79380819 -#endif - /* * Temporary until all toolchains in use include MSA support. */ @@ -380,8 +370,8 @@ .set push .set noat SET_HARDFLOAT - .insn - .word CFC_MSA_INSN | (\cs << 11) + insn_if_mips 0x787e0059 | (\cs << 11) + insn32_if_mm 0x587e0056 | (\cs << 11) move \rd, $1 .set pop .endm @@ -391,7 +381,8 @@ .set noat SET_HARDFLOAT move $1, \rs - .word CTC_MSA_INSN | (\cd << 6) + insn_if_mips 0x783e0819 | (\cd << 6) + insn32_if_mm 0x583e0816 | (\cd << 6) .set pop .endm @@ -400,7 +391,8 @@ .set noat SET_HARDFLOAT PTR_ADDU $1, \base, \off - .word LDB_MSA_INSN | (\wd << 6) + insn_if_mips 0x78000820 | (\wd << 6) + insn32_if_mm 0x58000807 | (\wd << 6) .set pop .endm @@ -409,7 +401,8 @@ .set noat SET_HARDFLOAT PTR_ADDU $1, \base, \off - .word LDH_MSA_INSN | (\wd << 6) + insn_if_mips 0x78000821 | (\wd << 6) + insn32_if_mm 0x58000817 | (\wd << 6) .set pop .endm @@ -418,7 +411,8 @@ .set noat SET_HARDFLOAT PTR_ADDU $1, \base, \off - .word LDW_MSA_INSN | (\wd << 6) + insn_if_mips 0x78000822 | (\wd << 6) + insn32_if_mm 0x58000827 | (\wd << 6) .set pop .endm @@ -427,7 +421,8 @@ .set noat SET_HARDFLOAT PTR_ADDU $1, \base, \off - .word LDD_MSA_INSN | (\wd << 6) + insn_if_mips 0x78000823 | (\wd << 6) + insn32_if_mm 0x58000837 | (\wd << 6) .set pop .endm @@ -436,7 +431,8 @@ .set noat SET_HARDFLOAT PTR_ADDU $1, \base, \off - .word STB_MSA_INSN | (\wd << 6) + insn_if_mips 0x78000824 | (\wd << 6) + insn32_if_mm 0x5800080f | (\wd << 6) .set pop .endm @@ -445,7 +441,8 @@ .set noat SET_HARDFLOAT PTR_ADDU $1, \base, \off - .word STH_MSA_INSN | (\wd << 6) + insn_if_mips 0x78000825 | (\wd << 6) + insn32_if_mm 0x5800081f | (\wd << 6) .set pop .endm @@ -454,7 +451,8 @@ .set noat SET_HARDFLOAT PTR_ADDU $1, \base, \off - .word STW_MSA_INSN | (\wd << 6) + insn_if_mips 0x78000826 | (\wd << 6) + insn32_if_mm 0x5800082f | (\wd << 6) .set pop .endm @@ -463,7 +461,8 @@ .set noat SET_HARDFLOAT PTR_ADDU $1, \base, \off - .word STD_MSA_INSN | (\wd << 6) + insn_if_mips 0x78000827 | (\wd << 6) + insn32_if_mm 0x5800083f | (\wd << 6) .set pop .endm @@ -471,8 +470,8 @@ .set push .set noat SET_HARDFLOAT - .insn - .word COPY_SW_MSA_INSN | (\n << 16) | (\ws << 11) + insn_if_mips 0x78b00059 | (\n << 16) | (\ws << 11) + insn32_if_mm 0x58b00056 | (\n << 16) | (\ws << 11) .set pop .endm @@ -480,8 +479,8 @@ .set push .set noat SET_HARDFLOAT - .insn - .word COPY_SD_MSA_INSN | (\n << 16) | (\ws << 11) + insn_if_mips 0x78b80059 | (\n << 16) | (\ws << 11) + insn32_if_mm 0x58b80056 | (\n << 16) | (\ws << 11) .set pop .endm @@ -489,7 +488,8 @@ .set push .set noat SET_HARDFLOAT - .word INSERT_W_MSA_INSN | (\n << 16) | (\wd << 6) + insn_if_mips 0x79300819 | (\n << 16) | (\wd << 6) + insn32_if_mm 0x59300816 | (\n << 16) | (\wd << 6) .set pop .endm @@ -497,7 +497,8 @@ .set push .set noat SET_HARDFLOAT - .word INSERT_D_MSA_INSN | (\n << 16) | (\wd << 6) + insn_if_mips 0x79380819 | (\n << 16) | (\wd << 6) + insn32_if_mm 0x59380816 | (\n << 16) | (\wd << 6) .set pop .endm #endif diff --git a/arch/mips/include/asm/msa.h b/arch/mips/include/asm/msa.h index 6e4effa6f626..ddf496cb2a2a 100644 --- a/arch/mips/include/asm/msa.h +++ b/arch/mips/include/asm/msa.h @@ -192,13 +192,6 @@ static inline void write_msa_##name(unsigned int val) \ * allow compilation with toolchains that do not support MSA. Once all * toolchains in use support MSA these can be removed. */ -#ifdef CONFIG_CPU_MICROMIPS -#define CFC_MSA_INSN 0x587e0056 -#define CTC_MSA_INSN 0x583e0816 -#else -#define CFC_MSA_INSN 0x787e0059 -#define CTC_MSA_INSN 0x783e0819 -#endif #define __BUILD_MSA_CTL_REG(name, cs) \ static inline unsigned int read_msa_##name(void) \ @@ -207,11 +200,12 @@ static inline unsigned int read_msa_##name(void) \ __asm__ __volatile__( \ " .set push\n" \ " .set noat\n" \ - " .insn\n" \ - " .word %1 | (" #cs " << 11)\n" \ + " # cfcmsa $1, $%1\n" \ + _ASM_INSN_IF_MIPS(0x787e0059 | %1 << 11) \ + _ASM_INSN32_IF_MM(0x587e0056 | %1 << 11) \ " move %0, $1\n" \ " .set pop\n" \ - : "=r"(reg) : "i"(CFC_MSA_INSN)); \ + : "=r"(reg) : "i"(cs)); \ return reg; \ } \ \ @@ -221,10 +215,11 @@ static inline void write_msa_##name(unsigned int val) \ " .set push\n" \ " .set noat\n" \ " move $1, %0\n" \ - " .insn\n" \ - " .word %1 | (" #cs " << 6)\n" \ + " # ctcmsa $%1, $1\n" \ + _ASM_INSN_IF_MIPS(0x783e0819 | %1 << 6) \ + _ASM_INSN32_IF_MM(0x583e0816 | %1 << 6) \ " .set pop\n" \ - : : "r"(val), "i"(CTC_MSA_INSN)); \ + : : "r"(val), "i"(cs)); \ } #endif /* !TOOLCHAIN_SUPPORTS_MSA */ -- cgit v1.2.3 From c84700cc575f4625e719817595b3df33c00307c7 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 20 May 2016 23:28:40 +0100 Subject: MIPS: Add missing tlbinvf/XPA microMIPS encodings Hardcoded MIPS instruction encodings are provided for tlbinvf, mfhc0 & mthc0 instructions, but microMIPS encodings are missing. I doubt any microMIPS cores exist at present which support these instructions, but the microMIPS encodings exist, and microMIPS cores may support them in the future. Add the missing microMIPS encodings using the new macros. Signed-off-by: James Hogan Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13313/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mipsregs.h | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 98b289af6245..918c576bf9ec 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1083,7 +1083,9 @@ static inline void tlbinvf(void) __asm__ __volatile__( ".set push\n\t" ".set noreorder\n\t" - ".word 0x42000004\n\t" /* tlbinvf */ + "# tlbinvf\n\t" + _ASM_INSN_IF_MIPS(0x42000004) + _ASM_INSN32_IF_MM(0x0000537c) ".set pop"); } @@ -1304,9 +1306,9 @@ do { \ " .set push \n" \ " .set noat \n" \ " .set mips32r2 \n" \ - " .insn \n" \ " # mfhc0 $1, %1 \n" \ - " .word (0x40410000 | ((%1 & 0x1f) << 11)) \n" \ + _ASM_INSN_IF_MIPS(0x40410000 | ((%1 & 0x1f) << 11)) \ + _ASM_INSN32_IF_MM(0x002000f4 | ((%1 & 0x1f) << 16)) \ " move %0, $1 \n" \ " .set pop \n" \ : "=r" (__res) \ @@ -1322,8 +1324,8 @@ do { \ " .set mips32r2 \n" \ " move $1, %0 \n" \ " # mthc0 $1, %1 \n" \ - " .insn \n" \ - " .word (0x40c10000 | ((%1 & 0x1f) << 11)) \n" \ + _ASM_INSN_IF_MIPS(0x40c10000 | ((%1 & 0x1f) << 11)) \ + _ASM_INSN32_IF_MM(0x002002f4 | ((%1 & 0x1f) << 16)) \ " .set pop \n" \ : \ : "r" (value), "i" (register)); \ -- cgit v1.2.3 From 5aadab0c1a3451565dec3b02ebbe162854d39181 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 20 May 2016 23:28:41 +0100 Subject: MIPS: Simplify DSP instruction encoding macros Simplify the DSP instruction wrapper macros which use explicit encodings for microMIPS and normal MIPS by using the new encoding macros and removing duplication. To me this makes it easier to read since it is much shorter, but it also ensures .insn is used, preventing objdump disassembling the microMIPS code as normal MIPS. Signed-off-by: James Hogan Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13314/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mipsregs.h | 107 +++++++-------------------------------- 1 file changed, 17 insertions(+), 90 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 918c576bf9ec..3a062ae933a4 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -2282,7 +2282,6 @@ do { \ #else -#ifdef CONFIG_CPU_MICROMIPS #define rddsp(mask) \ ({ \ unsigned int __res; \ @@ -2291,8 +2290,8 @@ do { \ " .set push \n" \ " .set noat \n" \ " # rddsp $1, %x1 \n" \ - " .hword ((0x0020067c | (%x1 << 14)) >> 16) \n" \ - " .hword ((0x0020067c | (%x1 << 14)) & 0xffff) \n" \ + _ASM_INSN_IF_MIPS(0x7c000cb8 | (%x1 << 16)) \ + _ASM_INSN32_IF_MM(0x0020067c | (%x1 << 14)) \ " move %0, $1 \n" \ " .set pop \n" \ : "=r" (__res) \ @@ -2307,22 +2306,22 @@ do { \ " .set noat \n" \ " move $1, %0 \n" \ " # wrdsp $1, %x1 \n" \ - " .hword ((0x0020167c | (%x1 << 14)) >> 16) \n" \ - " .hword ((0x0020167c | (%x1 << 14)) & 0xffff) \n" \ + _ASM_INSN_IF_MIPS(0x7c2004f8 | (%x1 << 11)) \ + _ASM_INSN32_IF_MM(0x0020167c | (%x1 << 14)) \ " .set pop \n" \ : \ : "r" (val), "i" (mask)); \ } while (0) -#define _umips_dsp_mfxxx(ins) \ +#define _dsp_mfxxx(ins) \ ({ \ unsigned long __treg; \ \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ - " .hword 0x0001 \n" \ - " .hword %x1 \n" \ + _ASM_INSN_IF_MIPS(0x00000810 | %X1) \ + _ASM_INSN32_IF_MM(0x0001007c | %x1) \ " move %0, $1 \n" \ " .set pop \n" \ : "=r" (__treg) \ @@ -2330,101 +2329,28 @@ do { \ __treg; \ }) -#define _umips_dsp_mtxxx(val, ins) \ +#define _dsp_mtxxx(val, ins) \ do { \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " move $1, %0 \n" \ - " .hword 0x0001 \n" \ - " .hword %x1 \n" \ + _ASM_INSN_IF_MIPS(0x00200011 | %X1) \ + _ASM_INSN32_IF_MM(0x0001207c | %x1) \ " .set pop \n" \ : \ : "r" (val), "i" (ins)); \ } while (0) -#define _umips_dsp_mflo(reg) _umips_dsp_mfxxx((reg << 14) | 0x107c) -#define _umips_dsp_mfhi(reg) _umips_dsp_mfxxx((reg << 14) | 0x007c) - -#define _umips_dsp_mtlo(val, reg) _umips_dsp_mtxxx(val, ((reg << 14) | 0x307c)) -#define _umips_dsp_mthi(val, reg) _umips_dsp_mtxxx(val, ((reg << 14) | 0x207c)) - -#define mflo0() _umips_dsp_mflo(0) -#define mflo1() _umips_dsp_mflo(1) -#define mflo2() _umips_dsp_mflo(2) -#define mflo3() _umips_dsp_mflo(3) - -#define mfhi0() _umips_dsp_mfhi(0) -#define mfhi1() _umips_dsp_mfhi(1) -#define mfhi2() _umips_dsp_mfhi(2) -#define mfhi3() _umips_dsp_mfhi(3) +#ifdef CONFIG_CPU_MICROMIPS -#define mtlo0(x) _umips_dsp_mtlo(x, 0) -#define mtlo1(x) _umips_dsp_mtlo(x, 1) -#define mtlo2(x) _umips_dsp_mtlo(x, 2) -#define mtlo3(x) _umips_dsp_mtlo(x, 3) +#define _dsp_mflo(reg) _dsp_mfxxx((reg << 14) | 0x1000) +#define _dsp_mfhi(reg) _dsp_mfxxx((reg << 14) | 0x0000) -#define mthi0(x) _umips_dsp_mthi(x, 0) -#define mthi1(x) _umips_dsp_mthi(x, 1) -#define mthi2(x) _umips_dsp_mthi(x, 2) -#define mthi3(x) _umips_dsp_mthi(x, 3) +#define _dsp_mtlo(val, reg) _dsp_mtxxx(val, ((reg << 14) | 0x1000)) +#define _dsp_mthi(val, reg) _dsp_mtxxx(val, ((reg << 14) | 0x0000)) #else /* !CONFIG_CPU_MICROMIPS */ -#define rddsp(mask) \ -({ \ - unsigned int __res; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # rddsp $1, %x1 \n" \ - " .word 0x7c000cb8 | (%x1 << 16) \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__res) \ - : "i" (mask)); \ - __res; \ -}) - -#define wrdsp(val, mask) \ -do { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # wrdsp $1, %x1 \n" \ - " .word 0x7c2004f8 | (%x1 << 11) \n" \ - " .set pop \n" \ - : \ - : "r" (val), "i" (mask)); \ -} while (0) - -#define _dsp_mfxxx(ins) \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " .word (0x00000810 | %1) \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg) \ - : "i" (ins)); \ - __treg; \ -}) - -#define _dsp_mtxxx(val, ins) \ -do { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " .word (0x00200011 | %1) \n" \ - " .set pop \n" \ - : \ - : "r" (val), "i" (ins)); \ -} while (0) #define _dsp_mflo(reg) _dsp_mfxxx((reg << 21) | 0x0002) #define _dsp_mfhi(reg) _dsp_mfxxx((reg << 21) | 0x0000) @@ -2432,6 +2358,8 @@ do { \ #define _dsp_mtlo(val, reg) _dsp_mtxxx(val, ((reg << 11) | 0x0002)) #define _dsp_mthi(val, reg) _dsp_mtxxx(val, ((reg << 11) | 0x0000)) +#endif /* CONFIG_CPU_MICROMIPS */ + #define mflo0() _dsp_mflo(0) #define mflo1() _dsp_mflo(1) #define mflo2() _dsp_mflo(2) @@ -2452,7 +2380,6 @@ do { \ #define mthi2(x) _dsp_mthi(x, 2) #define mthi3(x) _dsp_mthi(x, 3) -#endif /* CONFIG_CPU_MICROMIPS */ #endif /* -- cgit v1.2.3 From 6446e6cf440f6ee0f8b64c32968a8434205c1f59 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 27 May 2016 22:25:22 +0100 Subject: MIPS: Add 64-bit HTW fields Add field definitions for some of the 64-bit specific Hardware page Table Walker (HTW) register fields in PWSize and PWCtl, in preparation for fixing the 64-bit HTW configuration. Also print these fields out along with the others in print_htw_config(). Signed-off-by: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13363/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mipsregs.h | 8 ++++++++ arch/mips/mm/tlbex.c | 8 ++++++-- 2 files changed, 14 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 3a062ae933a4..e1ca65c62f6a 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -729,6 +729,8 @@ #define MIPS_PWFIELD_PTEI_SHIFT 0 #define MIPS_PWFIELD_PTEI_MASK 0x0000003f +#define MIPS_PWSIZE_PS_SHIFT 30 +#define MIPS_PWSIZE_PS_MASK 0x40000000 #define MIPS_PWSIZE_GDW_SHIFT 24 #define MIPS_PWSIZE_GDW_MASK 0x3f000000 #define MIPS_PWSIZE_UDW_SHIFT 18 @@ -742,6 +744,12 @@ #define MIPS_PWCTL_PWEN_SHIFT 31 #define MIPS_PWCTL_PWEN_MASK 0x80000000 +#define MIPS_PWCTL_XK_SHIFT 28 +#define MIPS_PWCTL_XK_MASK 0x10000000 +#define MIPS_PWCTL_XS_SHIFT 27 +#define MIPS_PWCTL_XS_MASK 0x08000000 +#define MIPS_PWCTL_XU_SHIFT 26 +#define MIPS_PWCTL_XU_MASK 0x04000000 #define MIPS_PWCTL_DPH_SHIFT 7 #define MIPS_PWCTL_DPH_MASK 0x00000080 #define MIPS_PWCTL_HUGEPG_SHIFT 6 diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 274da90adf0d..c363890368cd 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -2361,8 +2361,9 @@ static void print_htw_config(void) (config & MIPS_PWFIELD_PTEI_MASK) >> MIPS_PWFIELD_PTEI_SHIFT); config = read_c0_pwsize(); - pr_debug("PWSize (0x%0*lx): GDW: 0x%02lx UDW: 0x%02lx MDW: 0x%02lx PTW: 0x%02lx PTEW: 0x%02lx\n", + pr_debug("PWSize (0x%0*lx): PS: 0x%lx GDW: 0x%02lx UDW: 0x%02lx MDW: 0x%02lx PTW: 0x%02lx PTEW: 0x%02lx\n", field, config, + (config & MIPS_PWSIZE_PS_MASK) >> MIPS_PWSIZE_PS_SHIFT, (config & MIPS_PWSIZE_GDW_MASK) >> MIPS_PWSIZE_GDW_SHIFT, (config & MIPS_PWSIZE_UDW_MASK) >> MIPS_PWSIZE_UDW_SHIFT, (config & MIPS_PWSIZE_MDW_MASK) >> MIPS_PWSIZE_MDW_SHIFT, @@ -2370,9 +2371,12 @@ static void print_htw_config(void) (config & MIPS_PWSIZE_PTEW_MASK) >> MIPS_PWSIZE_PTEW_SHIFT); pwctl = read_c0_pwctl(); - pr_debug("PWCtl (0x%x): PWEn: 0x%x DPH: 0x%x HugePg: 0x%x Psn: 0x%x\n", + pr_debug("PWCtl (0x%x): PWEn: 0x%x XK: 0x%x XS: 0x%x XU: 0x%x DPH: 0x%x HugePg: 0x%x Psn: 0x%x\n", pwctl, (pwctl & MIPS_PWCTL_PWEN_MASK) >> MIPS_PWCTL_PWEN_SHIFT, + (pwctl & MIPS_PWCTL_XK_MASK) >> MIPS_PWCTL_XK_SHIFT, + (pwctl & MIPS_PWCTL_XS_MASK) >> MIPS_PWCTL_XS_SHIFT, + (pwctl & MIPS_PWCTL_XU_MASK) >> MIPS_PWCTL_XU_SHIFT, (pwctl & MIPS_PWCTL_DPH_MASK) >> MIPS_PWCTL_DPH_SHIFT, (pwctl & MIPS_PWCTL_HUGEPG_MASK) >> MIPS_PWCTL_HUGEPG_SHIFT, (pwctl & MIPS_PWCTL_PSN_MASK) >> MIPS_PWCTL_PSN_SHIFT); -- cgit v1.2.3 From aa76042a016474775ccd187c068669148c30c3bb Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 27 May 2016 22:25:23 +0100 Subject: MIPS: Fix 64-bit HTW configuration The Hardware page Table Walker (HTW) is being misconfigured on 64-bit kernels. The PWSize.PS (pointer size) bit determines whether pointers within directories are loaded as 32-bit or 64-bit addresses, but was never being set to 1 for 64-bit kernels where the unsigned long in pgd_t is 64-bits wide. This actually reduces rather than improves performance when the HTW is enabled on P6600 since the HTW is initiated lots, but walks are all aborted due I think to bad intermediate pointers. Since we were already taking the width of the PTEs into account by setting PWSize.PTEW, which is the left shift applied to the page table index *in addition to* the native pointer size, we also need to reduce PTEW by 1 when PS=1. This is done by calculating PTEW based on the relative size of pte_t compared to pgd_t. Finally in order for the HTW to be used when PS=1, the appropriate XK/XS/XU bits corresponding to the different 64-bit segments need to be set in PWCtl. We enable only XU for now to enable walking for XUSeg. Supporting walking for XKSeg would be a bit more involved so is left for a future patch. It would either require the use of a per-CPU top level base directory if supported by the HTW (a bit like pgd_current but with a second entry pointing at swapper_pg_dir), or the HTW would prepend bit 63 of the address to the global directory index which doesn't really match how we split user and kernel page directories. Fixes: cab25bc7537b ("MIPS: Extend hardware table walking support to MIPS64") Signed-off-by: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13364/ Signed-off-by: Ralf Baechle --- arch/mips/mm/tlbex.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index c363890368cd..4004b659ce50 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -2431,15 +2431,25 @@ static void config_htw_params(void) if (CONFIG_PGTABLE_LEVELS >= 3) pwsize |= ilog2(PTRS_PER_PMD) << MIPS_PWSIZE_MDW_SHIFT; - pwsize |= ilog2(sizeof(pte_t)/4) << MIPS_PWSIZE_PTEW_SHIFT; + /* Set pointer size to size of directory pointers */ + if (config_enabled(CONFIG_64BIT)) + pwsize |= MIPS_PWSIZE_PS_MASK; + /* PTEs may be multiple pointers long (e.g. with XPA) */ + pwsize |= ((PTE_T_LOG2 - PGD_T_LOG2) << MIPS_PWSIZE_PTEW_SHIFT) + & MIPS_PWSIZE_PTEW_MASK; write_c0_pwsize(pwsize); /* Make sure everything is set before we enable the HTW */ back_to_back_c0_hazard(); - /* Enable HTW and disable the rest of the pwctl fields */ + /* + * Enable HTW (and only for XUSeg on 64-bit), and disable the rest of + * the pwctl fields. + */ config = 1 << MIPS_PWCTL_PWEN_SHIFT; + if (config_enabled(CONFIG_64BIT)) + config |= MIPS_PWCTL_XU_MASK; write_c0_pwctl(config); pr_info("Hardware Page Table Walker enabled\n"); -- cgit v1.2.3 From aedcfbe06558a9f53002e82d5be64c6c94687726 Mon Sep 17 00:00:00 2001 From: Harvey Hunt Date: Wed, 25 May 2016 11:06:35 +0100 Subject: MIPS: lib: Mark intrinsics notrace On certain MIPS32 devices, the ftrace tracer "function_graph" uses __lshrdi3() during the capturing of trace data. ftrace then attempts to trace __lshrdi3() which leads to infinite recursion and a stack overflow. Fix this by marking __lshrdi3() as notrace. Mark the other compiler intrinsics as notrace in case the compiler decides to use them in the ftrace path. Signed-off-by: Harvey Hunt Cc: Cc: Cc: # 4.2.x- Patchwork: https://patchwork.linux-mips.org/patch/13354/ Signed-off-by: Ralf Baechle --- arch/mips/lib/ashldi3.c | 2 +- arch/mips/lib/ashrdi3.c | 2 +- arch/mips/lib/bswapdi.c | 2 +- arch/mips/lib/bswapsi.c | 2 +- arch/mips/lib/cmpdi2.c | 2 +- arch/mips/lib/lshrdi3.c | 2 +- arch/mips/lib/ucmpdi2.c | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/lib/ashldi3.c b/arch/mips/lib/ashldi3.c index beb80f316095..927dc94a030f 100644 --- a/arch/mips/lib/ashldi3.c +++ b/arch/mips/lib/ashldi3.c @@ -2,7 +2,7 @@ #include "libgcc.h" -long long __ashldi3(long long u, word_type b) +long long notrace __ashldi3(long long u, word_type b) { DWunion uu, w; word_type bm; diff --git a/arch/mips/lib/ashrdi3.c b/arch/mips/lib/ashrdi3.c index c884a912b660..9fdf1a598428 100644 --- a/arch/mips/lib/ashrdi3.c +++ b/arch/mips/lib/ashrdi3.c @@ -2,7 +2,7 @@ #include "libgcc.h" -long long __ashrdi3(long long u, word_type b) +long long notrace __ashrdi3(long long u, word_type b) { DWunion uu, w; word_type bm; diff --git a/arch/mips/lib/bswapdi.c b/arch/mips/lib/bswapdi.c index 77e5f9c1f005..e3e77aa52c95 100644 --- a/arch/mips/lib/bswapdi.c +++ b/arch/mips/lib/bswapdi.c @@ -1,6 +1,6 @@ #include -unsigned long long __bswapdi2(unsigned long long u) +unsigned long long notrace __bswapdi2(unsigned long long u) { return (((u) & 0xff00000000000000ull) >> 56) | (((u) & 0x00ff000000000000ull) >> 40) | diff --git a/arch/mips/lib/bswapsi.c b/arch/mips/lib/bswapsi.c index 2b302ff121d2..530a8afe6fda 100644 --- a/arch/mips/lib/bswapsi.c +++ b/arch/mips/lib/bswapsi.c @@ -1,6 +1,6 @@ #include -unsigned int __bswapsi2(unsigned int u) +unsigned int notrace __bswapsi2(unsigned int u) { return (((u) & 0xff000000) >> 24) | (((u) & 0x00ff0000) >> 8) | diff --git a/arch/mips/lib/cmpdi2.c b/arch/mips/lib/cmpdi2.c index 8c1306437ed1..06857da96993 100644 --- a/arch/mips/lib/cmpdi2.c +++ b/arch/mips/lib/cmpdi2.c @@ -2,7 +2,7 @@ #include "libgcc.h" -word_type __cmpdi2(long long a, long long b) +word_type notrace __cmpdi2(long long a, long long b) { const DWunion au = { .ll = a diff --git a/arch/mips/lib/lshrdi3.c b/arch/mips/lib/lshrdi3.c index dcf8d6810b7c..364547449c65 100644 --- a/arch/mips/lib/lshrdi3.c +++ b/arch/mips/lib/lshrdi3.c @@ -2,7 +2,7 @@ #include "libgcc.h" -long long __lshrdi3(long long u, word_type b) +long long notrace __lshrdi3(long long u, word_type b) { DWunion uu, w; word_type bm; diff --git a/arch/mips/lib/ucmpdi2.c b/arch/mips/lib/ucmpdi2.c index bb4cb2f828ea..bd599f58234c 100644 --- a/arch/mips/lib/ucmpdi2.c +++ b/arch/mips/lib/ucmpdi2.c @@ -2,7 +2,7 @@ #include "libgcc.h" -word_type __ucmpdi2(unsigned long long a, unsigned long long b) +word_type notrace __ucmpdi2(unsigned long long a, unsigned long long b) { const DWunion au = {.ll = a}; const DWunion bu = {.ll = b}; -- cgit v1.2.3 From 41cc07be42835a5c35b409af3914b8fcaedd0d72 Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Wed, 25 May 2016 12:58:40 +0100 Subject: MIPS: Pistachio: Enable KASLR Allow KASLR to be selected on Pistachio based systems. Tested on a Creator Ci40. Signed-off-by: Matt Redfearn Reviewed-by: James Hogan Cc: Andrew Bresticker Cc: Jonas Gorski Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13356/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + arch/mips/pistachio/init.c | 8 ++++++-- 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ac9bfad794eb..7ce55623b522 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -399,6 +399,7 @@ config MACH_PISTACHIO select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_MIPS_CPS select SYS_SUPPORTS_MULTITHREADING + select SYS_SUPPORTS_RELOCATABLE select SYS_SUPPORTS_ZBOOT select SYS_HAS_EARLY_PRINTK select USE_GENERIC_EARLY_PRINTK_8250 diff --git a/arch/mips/pistachio/init.c b/arch/mips/pistachio/init.c index 956c92eabfab..ab79828230ab 100644 --- a/arch/mips/pistachio/init.c +++ b/arch/mips/pistachio/init.c @@ -83,12 +83,16 @@ static void __init plat_setup_iocoherency(void) } } -void __init plat_mem_setup(void) +void __init *plat_get_fdt(void) { if (fw_arg0 != -2) panic("Device-tree not present"); + return (void *)fw_arg1; +} - __dt_setup_arch((void *)fw_arg1); +void __init plat_mem_setup(void) +{ + __dt_setup_arch(plat_get_fdt()); plat_setup_iocoherency(); } -- cgit v1.2.3 From 94cc36b84acc29f543b48bc5ed786011b112a666 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 26 May 2016 12:55:45 +0100 Subject: MIPS: VDSO: Build with `-fno-strict-aliasing' Avoid an aliasing issue causing a build error in VDSO: In file included from include/linux/srcu.h:34:0, from include/linux/notifier.h:15, from ./arch/mips/include/asm/uprobes.h:9, from include/linux/uprobes.h:61, from include/linux/mm_types.h:13, from ./arch/mips/include/asm/vdso.h:14, from arch/mips/vdso/vdso.h:27, from arch/mips/vdso/gettimeofday.c:11: include/linux/workqueue.h: In function 'work_static': include/linux/workqueue.h:186:2: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasing] return *work_data_bits(work) & WORK_STRUCT_STATIC; ^ cc1: all warnings being treated as errors make[2]: *** [arch/mips/vdso/gettimeofday.o] Error 1 with a CONFIG_DEBUG_OBJECTS_WORK configuration and GCC 5.2.0. Include `-fno-strict-aliasing' along with compiler options used, as required for kernel code, fixing a problem present since the introduction of VDSO with commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO"). Thanks to Tejun for diagnosing this properly! Signed-off-by: Maciej W. Rozycki Reviewed-by: James Hogan Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Cc: Tejun Heo Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.3+ Patchwork: https://patchwork.linux-mips.org/patch/13357/ Signed-off-by: Ralf Baechle --- arch/mips/vdso/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile index b369509e9753..fff01eddf3e9 100644 --- a/arch/mips/vdso/Makefile +++ b/arch/mips/vdso/Makefile @@ -8,7 +8,8 @@ ccflags-vdso := \ $(filter -march=%,$(KBUILD_CFLAGS)) cflags-vdso := $(ccflags-vdso) \ $(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \ - -O2 -g -fPIC -fno-common -fno-builtin -G 0 -DDISABLE_BRANCH_PROFILING \ + -O2 -g -fPIC -fno-strict-aliasing -fno-common -fno-builtin -G 0 \ + -DDISABLE_BRANCH_PROFILING \ $(call cc-option, -fno-stack-protector) aflags-vdso := $(ccflags-vdso) \ $(filter -I%,$(KBUILD_CFLAGS)) \ -- cgit v1.2.3 From 5214cae77c11f5fdb13ebe478067a6008c4da630 Mon Sep 17 00:00:00 2001 From: Antony Pavlov Date: Mon, 23 May 2016 14:39:00 +0300 Subject: MIPS: devicetree: fix cpu interrupt controller node-names MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Here is the quote from [1]: The unit-address must match the first address specified in the reg property of the node. If the node has no reg property, the @ and unit-address must be omitted and the node-name alone differentiates the node from other nodes at the same level This patch adjusts MIPS dts-files and devicetree binding documentation in accordance with [1]. [1] Power.org(tm) Standard for Embedded Power Architecture(tm) Platform Requirements (ePAPR). Version 1.1 – 08 April 2011. Chapter 2.2.1.1 Node Name Requirements Signed-off-by: Antony Pavlov Cc: Paul Burton Cc: Zubair Lutfullah Kakakhel Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13345/ Acked-by: Rob Herring Signed-off-by: Ralf Baechle --- arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +- arch/mips/boot/dts/ralink/mt7620a.dtsi | 2 +- arch/mips/boot/dts/ralink/rt2880.dtsi | 2 +- arch/mips/boot/dts/ralink/rt3050.dtsi | 2 +- arch/mips/boot/dts/ralink/rt3883.dtsi | 2 +- arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi index 4a9c8f2a72d6..f6ae6ed9c4b1 100644 --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi @@ -5,7 +5,7 @@ #size-cells = <1>; compatible = "ingenic,jz4740"; - cpuintc: interrupt-controller@0 { + cpuintc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/ralink/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi index 08bf24fefe9f..793c0c7ca921 100644 --- a/arch/mips/boot/dts/ralink/mt7620a.dtsi +++ b/arch/mips/boot/dts/ralink/mt7620a.dtsi @@ -9,7 +9,7 @@ }; }; - cpuintc: cpuintc@0 { + cpuintc: cpuintc { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/ralink/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi index 182afde2f2e1..fb2faef0ab79 100644 --- a/arch/mips/boot/dts/ralink/rt2880.dtsi +++ b/arch/mips/boot/dts/ralink/rt2880.dtsi @@ -9,7 +9,7 @@ }; }; - cpuintc: cpuintc@0 { + cpuintc: cpuintc { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/ralink/rt3050.dtsi b/arch/mips/boot/dts/ralink/rt3050.dtsi index e3203d414fee..d3cb57f985da 100644 --- a/arch/mips/boot/dts/ralink/rt3050.dtsi +++ b/arch/mips/boot/dts/ralink/rt3050.dtsi @@ -9,7 +9,7 @@ }; }; - cpuintc: cpuintc@0 { + cpuintc: cpuintc { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/ralink/rt3883.dtsi b/arch/mips/boot/dts/ralink/rt3883.dtsi index 3b131dd0d5ac..3d6fc9afdaf6 100644 --- a/arch/mips/boot/dts/ralink/rt3883.dtsi +++ b/arch/mips/boot/dts/ralink/rt3883.dtsi @@ -9,7 +9,7 @@ }; }; - cpuintc: cpuintc@0 { + cpuintc: cpuintc { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts index 686ebd11386d..48d21127c3f3 100644 --- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts +++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts @@ -10,7 +10,7 @@ reg = <0x0 0x08000000>; }; - cpuintc: interrupt-controller@0 { + cpuintc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; -- cgit v1.2.3 From 13eb192d10bcc9ac518d57356179071d603bcb4e Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 24 May 2016 09:35:10 +0100 Subject: MIPS: Fix sigreturn via VDSO on microMIPS kernel In microMIPS kernels, handle_signal() sets the isa16 mode bit in the vdso address so that the sigreturn trampolines (which are offset from the VDSO) get executed as microMIPS. However commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") changed the offsets to come from the VDSO image, which already have the isa16 mode bit set correctly since they're extracted from the VDSO shared library symbol table. Drop the isa16 mode bit handling from handle_signal() to fix sigreturn for cores which support both microMIPS and normal MIPS. This doesn't fix microMIPS only cores, since the VDSO is still built for normal MIPS, but thats a separate problem. Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Cc: # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/13348/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index ab042291fbfd..ae4231452115 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -770,15 +770,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) sigset_t *oldset = sigmask_to_save(); int ret; struct mips_abi *abi = current->thread.abi; -#ifdef CONFIG_CPU_MICROMIPS - void *vdso; - unsigned long tmp = (unsigned long)current->mm->context.vdso; - - set_isa16_mode(tmp); - vdso = (void *)tmp; -#else void *vdso = current->mm->context.vdso; -#endif if (regs->regs[0]) { switch(regs->regs[2]) { -- cgit v1.2.3 From bb93078e655be1e24d68f28f2756676e62c037ce Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 24 May 2016 09:35:11 +0100 Subject: MIPS: Build microMIPS VDSO for microMIPS kernels MicroMIPS kernels may be expected to run on microMIPS only cores which don't support the normal MIPS instruction set, so be sure to pass the -mmicromips flag through to the VDSO cflags. Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Cc: # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/13349/ Signed-off-by: Ralf Baechle --- arch/mips/vdso/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/mips') diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile index fff01eddf3e9..3b4538ec0102 100644 --- a/arch/mips/vdso/Makefile +++ b/arch/mips/vdso/Makefile @@ -5,6 +5,7 @@ obj-vdso-y := elf.o gettimeofday.o sigreturn.o ccflags-vdso := \ $(filter -I%,$(KBUILD_CFLAGS)) \ $(filter -E%,$(KBUILD_CFLAGS)) \ + $(filter -mmicromips,$(KBUILD_CFLAGS)) \ $(filter -march=%,$(KBUILD_CFLAGS)) cflags-vdso := $(ccflags-vdso) \ $(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \ -- cgit v1.2.3 From a8c5ddf08f1f7e587240c44f82f4762bd37df1f3 Mon Sep 17 00:00:00 2001 From: Anna-Maria Gleixner Date: Tue, 24 May 2016 15:08:47 +0200 Subject: MIPS: Add missing FROZEN hotplug notifier transitions The corresponding FROZEN hotplug notifier transitions used on suspend/resume are ignored. Therefore the switch case action argument is masked with the frozen hotplug notifier transition mask. Signed-off-by: Anna-Maria Gleixner Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: rt@linutronix.de Patchwork: https://patchwork.linux-mips.org/patch/13351/ Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index dff88aa7e377..33aab89259f3 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -384,7 +384,7 @@ static int octeon_cpu_callback(struct notifier_block *nfb, { unsigned int cpu = (unsigned long)hcpu; - switch (action) { + switch (action & ~CPU_TASKS_FROZEN) { case CPU_UP_PREPARE: octeon_update_boot_vector(cpu); break; -- cgit v1.2.3