From 7558da942e51933b5e6aa5e851d4da1df0cd6752 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 15 May 2008 09:10:50 -0600 Subject: mips: cdev lock_kernel() pushdown Push the cdev lock_kernel() call into MIPS-specific drivers. Signed-off-by: Jonathan Corbet --- arch/mips/kernel/rtlx.c | 7 ++++++- arch/mips/kernel/vpe.c | 12 +++++++++--- arch/mips/sibyte/common/sb_tbprof.c | 25 ++++++++++++++++++------- 3 files changed, 33 insertions(+), 11 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index b88f1c18ff4d..b55641961232 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -392,8 +393,12 @@ out: static int file_open(struct inode *inode, struct file *filp) { int minor = iminor(inode); + int err; - return rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1); + lock_kernel(); + err = rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1); + unlock_kernel(); + return err; } static int file_release(struct inode *inode, struct file *filp) diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 2794501ff302..972b2d2b8401 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include @@ -1050,17 +1051,20 @@ static int vpe_open(struct inode *inode, struct file *filp) enum vpe_state state; struct vpe_notifications *not; struct vpe *v; - int ret; + int ret, err = 0; + lock_kernel(); if (minor != iminor(inode)) { /* assume only 1 device at the moment. */ printk(KERN_WARNING "VPE loader: only vpe1 is supported\n"); - return -ENODEV; + err = -ENODEV; + goto out; } if ((v = get_vpe(tclimit)) == NULL) { printk(KERN_WARNING "VPE loader: unable to get vpe\n"); - return -ENODEV; + err = -ENODEV; + goto out; } state = xchg(&v->state, VPE_STATE_INUSE); @@ -1100,6 +1104,8 @@ static int vpe_open(struct inode *inode, struct file *filp) v->shared_ptr = NULL; v->__start = 0; +out: + unlock_kernel(); return 0; } diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c index 63b444eaf01e..28b012ab8dcb 100644 --- a/arch/mips/sibyte/common/sb_tbprof.c +++ b/arch/mips/sibyte/common/sb_tbprof.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -402,18 +403,26 @@ static int sbprof_zbprof_stop(void) static int sbprof_tb_open(struct inode *inode, struct file *filp) { int minor; + int err = 0; + lock_kernel(); minor = iminor(inode); - if (minor != 0) - return -ENODEV; + if (minor != 0) { + err = -ENODEV; + goto out; + } - if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) - return -EBUSY; + if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) { + err = -EBUSY; + goto out; + } memset(&sbp, 0, sizeof(struct sbprof_tb)); sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES); - if (!sbp.sbprof_tbbuf) - return -ENOMEM; + if (!sbp.sbprof_tbbuf) { + err = -ENOMEM; + goto out; + } memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES); init_waitqueue_head(&sbp.tb_sync); init_waitqueue_head(&sbp.tb_read); @@ -421,7 +430,9 @@ static int sbprof_tb_open(struct inode *inode, struct file *filp) sbp.open = SB_OPEN; - return 0; + out: + unlock_kernel(); + return err; } static int sbprof_tb_release(struct inode *inode, struct file *filp) -- cgit v1.2.3 From b1fb05cdb9096e3fe1af4474e108dedce2515801 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Wed, 7 May 2008 13:42:55 +0200 Subject: [MIPS] Alchemy: export get_au1x00_speed for modules au1xmmc.c driver depends on it, so export it for modules. Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/clocks.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/mips') diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c index 46f8ee0e2657..043429d17c5f 100644 --- a/arch/mips/au1000/common/clocks.c +++ b/arch/mips/au1000/common/clocks.c @@ -45,6 +45,7 @@ unsigned int get_au1x00_speed(void) { return au1x00_clock; } +EXPORT_SYMBOL(get_au1x00_speed); /* * The UART baud base is not known at compile time ... if -- cgit v1.2.3 From ccdb0034f8d5321be42c479dd7fc872ba2a46adb Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Wed, 7 May 2008 13:45:23 +0200 Subject: [MIPS] Alchemy: dbdma: add API to delete custom DDMA device ids. Add API to delete custom DDMA device ids create with au1xxx_ddma_device_add(). Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/dbdma.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c index 42d555236de1..601ee9180ee4 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/au1000/common/dbdma.c @@ -216,6 +216,17 @@ u32 au1xxx_ddma_add_device(dbdev_tab_t *dev) } EXPORT_SYMBOL(au1xxx_ddma_add_device); +void au1xxx_ddma_del_device(u32 devid) +{ + dbdev_tab_t *p = find_dbdev_id(devid); + + if (p != NULL) { + memset(p, 0, sizeof(dbdev_tab_t)); + p->dev_id = ~0; + } +} +EXPORT_SYMBOL(au1xxx_ddma_del_device); + /* Allocate a channel and return a non-zero descriptor if successful. */ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, void (*callback)(int, void *), void *callparam) -- cgit v1.2.3 From 326e2e1a59decc81bea052e8a8c6d75c63daa2db Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 12 May 2008 13:55:42 +0200 Subject: [MIPS] R4700: Fix build_tlb_probe_entry Treat R4700 like R4600 in build_tlb_probe_entry. Without this fix kernel will lock up. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/mm/tlbex.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 382738ca8a0b..76da73a5ab3c 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -224,8 +224,9 @@ static u32 final_handler[64] __cpuinitdata; static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p) { switch (current_cpu_type()) { - /* Found by experiment: R4600 v2.0 needs this, too. */ + /* Found by experiment: R4600 v2.0/R4700 needs this, too. */ case CPU_R4600: + case CPU_R4700: case CPU_R5000: case CPU_R5000A: case CPU_NEVADA: -- cgit v1.2.3 From 10220c884444a1866bb070e207d84fc18188e2a7 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 12 May 2008 17:58:48 +0200 Subject: [MIPS] Fix check for valid stack pointer during backtrace The newly added check for valid stack pointer address breaks at least for 64bit kernels. Use __get_user() for accessing stack content to avoid crashes, when doing the backtrace. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index cb8b0e2c7954..f9165d1a17bf 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -88,15 +88,17 @@ static void show_raw_backtrace(unsigned long reg29) #ifdef CONFIG_KALLSYMS printk("\n"); #endif -#define IS_KVA01(a) ((((unsigned int)a) & 0xc0000000) == 0x80000000) - if (IS_KVA01(sp)) { - while (!kstack_end(sp)) { - addr = *sp++; - if (__kernel_text_address(addr)) - print_ip_sym(addr); + while (!kstack_end(sp)) { + unsigned long __user *p = + (unsigned long __user *)(unsigned long)sp++; + if (__get_user(addr, p)) { + printk(" (Bad stack address)"); + break; } - printk("\n"); + if (__kernel_text_address(addr)) + print_ip_sym(addr); } + printk("\n"); } #ifdef CONFIG_KALLSYMS -- cgit v1.2.3 From c2719d93836b0b0cdf1725449d87705da6ede9a5 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 21 May 2008 01:55:02 +0300 Subject: [MIPS] remove CONFIG_CPU_R4000 line from Makefile The existing options are named CONFIG_CPU_R4300 and CONFIG_CPU_R4X00, and they are directly below. Reported-by: Robert P. J. Day Signed-off-by: Adrian Bunk Signed-off-by: Ralf Baechle --- arch/mips/kernel/Makefile | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index cc0244036aec..65e46a6d4178 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -30,7 +30,6 @@ obj-$(CONFIG_CPU_LOONGSON2) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o -obj-$(CONFIG_CPU_R4000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R4300) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o -- cgit v1.2.3 From 2bf8ec2d8137e66998435ddf6d4060a558e2f727 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 8 Apr 2008 23:43:46 +0200 Subject: [MIPS] IP27: Fix bootmem memory setup Changes in the generic bootmem code broke memory setup for IP27. This patch fixes this by replacing lots of special IP27 code with generic bootmon code. This has been tested only on a single node. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip27/ip27-memory.c | 117 ++++++++------------------------------- 1 file changed, 22 insertions(+), 95 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index bf438d02366e..42cd10956306 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -33,10 +33,6 @@ #define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT) #define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT) -#define SLOT_IGNORED 0xffff - -static short __initdata slot_lastfilled_cache[MAX_COMPACT_NODES]; -static unsigned short __initdata slot_psize_cache[MAX_COMPACT_NODES][MAX_MEM_SLOTS]; static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES]; struct node_data *__node_data[MAX_COMPACT_NODES]; @@ -267,51 +263,6 @@ static pfn_t __init slot_getbasepfn(cnodeid_t cnode, int slot) return ((pfn_t)nasid << PFN_NASIDSHFT) | (slot << SLOT_PFNSHIFT); } -/* - * Return the number of pages of memory provided by the given slot - * on the specified node. - */ -static pfn_t __init slot_getsize(cnodeid_t node, int slot) -{ - return (pfn_t) slot_psize_cache[node][slot]; -} - -/* - * Return highest slot filled - */ -static int __init node_getlastslot(cnodeid_t node) -{ - return (int) slot_lastfilled_cache[node]; -} - -/* - * Return the pfn of the last free page of memory on a node. - */ -static pfn_t __init node_getmaxclick(cnodeid_t node) -{ - pfn_t slot_psize; - int slot; - - /* - * Start at the top slot. When we find a slot with memory in it, - * that's the winner. - */ - for (slot = (MAX_MEM_SLOTS - 1); slot >= 0; slot--) { - if ((slot_psize = slot_getsize(node, slot))) { - if (slot_psize == SLOT_IGNORED) - continue; - /* Return the basepfn + the slot size, minus 1. */ - return slot_getbasepfn(node, slot) + slot_psize - 1; - } - } - - /* - * If there's no memory on the node, return 0. This is likely - * to cause problems. - */ - return 0; -} - static pfn_t __init slot_psize_compute(cnodeid_t node, int slot) { nasid_t nasid; @@ -404,13 +355,13 @@ static void __init mlreset(void) static void __init szmem(void) { pfn_t slot_psize, slot0sz = 0, nodebytes; /* Hack to detect problem configs */ - int slot, ignore; + int slot; cnodeid_t node; num_physpages = 0; for_each_online_node(node) { - ignore = nodebytes = 0; + nodebytes = 0; for (slot = 0; slot < MAX_MEM_SLOTS; slot++) { slot_psize = slot_psize_compute(node, slot); if (slot == 0) @@ -420,21 +371,20 @@ static void __init szmem(void) * kernel text. */ nodebytes += (1LL << SLOT_SHIFT); + + if (!slot_psize) + continue; + if ((nodebytes >> PAGE_SHIFT) * (sizeof(struct page)) > - (slot0sz << PAGE_SHIFT)) - ignore = 1; - if (ignore && slot_psize) { + (slot0sz << PAGE_SHIFT)) { printk("Ignoring slot %d onwards on node %d\n", slot, node); - slot_psize_cache[node][slot] = SLOT_IGNORED; slot = MAX_MEM_SLOTS; continue; } num_physpages += slot_psize; - slot_psize_cache[node][slot] = - (unsigned short) slot_psize; - if (slot_psize) - slot_lastfilled_cache[node] = slot; + add_active_range(node, slot_getbasepfn(node, slot), + slot_getbasepfn(node, slot) + slot_psize); } } } @@ -442,18 +392,20 @@ static void __init szmem(void) static void __init node_mem_init(cnodeid_t node) { pfn_t slot_firstpfn = slot_getbasepfn(node, 0); - pfn_t slot_lastpfn = slot_firstpfn + slot_getsize(node, 0); pfn_t slot_freepfn = node_getfirstfree(node); - struct pglist_data *pd; unsigned long bootmap_size; + pfn_t start_pfn, end_pfn; + + get_pfn_range_for_nid(node, &start_pfn, &end_pfn); /* * Allocate the node data structures on the node first. */ __node_data[node] = __va(slot_freepfn << PAGE_SHIFT); - pd = NODE_DATA(node); - pd->bdata = &plat_node_bdata[node]; + NODE_DATA(node)->bdata = &plat_node_bdata[node]; + NODE_DATA(node)->node_start_pfn = start_pfn; + NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn; cpus_clear(hub_data(node)->h_cpus); @@ -461,12 +413,12 @@ static void __init node_mem_init(cnodeid_t node) sizeof(struct hub_data)); bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn, - slot_firstpfn, slot_lastpfn); - free_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT, - (slot_lastpfn - slot_firstpfn) << PAGE_SHIFT); + start_pfn, end_pfn); + free_bootmem_with_active_regions(node, end_pfn); reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT, ((slot_freepfn - slot_firstpfn) << PAGE_SHIFT) + bootmap_size, BOOTMEM_DEFAULT); + sparse_memory_present_with_active_regions(node); } /* @@ -515,16 +467,15 @@ void __init paging_init(void) pagetable_init(); for_each_online_node(node) { - pfn_t start_pfn = slot_getbasepfn(node, 0); - pfn_t end_pfn = node_getmaxclick(node) + 1; + pfn_t start_pfn, end_pfn; - zones_size[ZONE_NORMAL] = end_pfn - start_pfn; - free_area_init_node(node, NODE_DATA(node), - zones_size, start_pfn, NULL); + get_pfn_range_for_nid(node, &start_pfn, &end_pfn); if (end_pfn > max_low_pfn) max_low_pfn = end_pfn; } + zones_size[ZONE_NORMAL] = max_low_pfn; + free_area_init_nodes(zones_size); } void __init mem_init(void) @@ -535,34 +486,10 @@ void __init mem_init(void) high_memory = (void *) __va(num_physpages << PAGE_SHIFT); for_each_online_node(node) { - unsigned slot, numslots; - struct page *end, *p; - /* * This will free up the bootmem, ie, slot 0 memory. */ totalram_pages += free_all_bootmem_node(NODE_DATA(node)); - - /* - * We need to manually do the other slots. - */ - numslots = node_getlastslot(node); - for (slot = 1; slot <= numslots; slot++) { - p = nid_page_nr(node, slot_getbasepfn(node, slot) - - slot_getbasepfn(node, 0)); - - /* - * Free valid memory in current slot. - */ - for (end = p + slot_getsize(node, slot); p < end; p++) { - /* if (!page_is_ram(pgnr)) continue; */ - /* commented out until page_is_ram works */ - ClearPageReserved(p); - init_page_count(p); - __free_page(p); - totalram_pages++; - } - } } totalram_pages -= setup_zero_pages(); /* This comes from node 0 */ -- cgit v1.2.3 From b32bb803fb52cc669762780d44b4c3d9e3d799f6 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 8 Apr 2008 23:43:57 +0200 Subject: [MIPS] IP27: Fix clockevent setup Fix breakage introduced by converting hub_rt to clockevent. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip27/ip27-smp.c | 5 ++++- arch/mips/sgi-ip27/ip27-timer.c | 27 +++++++++++++-------------- 2 files changed, 17 insertions(+), 15 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index f15fc93d6b35..ba5cdebeaf0d 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -176,11 +176,14 @@ static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action) static void __cpuinit ip27_init_secondary(void) { per_cpu_init(); - local_irq_enable(); } static void __cpuinit ip27_smp_finish(void) { + extern void hub_rt_clock_event_init(void); + + hub_rt_clock_event_init(); + local_irq_enable(); } static void __init ip27_cpus_done(void) diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 9cebc9e7da63..8b4e854af925 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -160,10 +160,13 @@ static void rt_set_mode(enum clock_event_mode mode, int rt_timer_irq; +static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent); +static DEFINE_PER_CPU(char [11], hub_rt_name); + static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id) { - struct clock_event_device *cd = dev_id; unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu); int slice = cputoslice(cpu); /* @@ -192,10 +195,7 @@ struct irqaction hub_rt_irqaction = { #define NSEC_PER_CYCLE 800 #define CYCLES_PER_SEC (NSEC_PER_SEC / NSEC_PER_CYCLE) -static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent); -static DEFINE_PER_CPU(char [11], hub_rt_name); - -static void __cpuinit hub_rt_clock_event_init(void) +void __cpuinit hub_rt_clock_event_init(void) { unsigned int cpu = smp_processor_id(); struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu); @@ -203,17 +203,16 @@ static void __cpuinit hub_rt_clock_event_init(void) int irq = rt_timer_irq; sprintf(name, "hub-rt %d", cpu); - cd->name = "HUB-RT", - cd->features = CLOCK_EVT_FEAT_ONESHOT, + cd->name = name; + cd->features = CLOCK_EVT_FEAT_ONESHOT; clockevent_set_clock(cd, CYCLES_PER_SEC); cd->max_delta_ns = clockevent_delta2ns(0xfffffffffffff, cd); cd->min_delta_ns = clockevent_delta2ns(0x300, cd); - cd->rating = 200, - cd->irq = irq, - cd->cpumask = cpumask_of_cpu(cpu), - cd->rating = 300, - cd->set_next_event = rt_next_event, - cd->set_mode = rt_set_mode, + cd->rating = 200; + cd->irq = irq; + cd->cpumask = cpumask_of_cpu(cpu); + cd->set_next_event = rt_next_event; + cd->set_mode = rt_set_mode; clockevents_register_device(cd); } @@ -261,6 +260,7 @@ void __init plat_time_init(void) { hub_rt_clocksource_init(); hub_rt_clock_event_global_init(); + hub_rt_clock_event_init(); } void __cpuinit cpu_time_init(void) @@ -281,7 +281,6 @@ void __cpuinit cpu_time_init(void) printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed); - hub_rt_clock_event_init(); set_c0_status(SRB_TIMOCLK); } -- cgit v1.2.3 From 96173a6c4ebca4c146bb87026cce78bbe392cb61 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 17 Apr 2008 22:07:42 +0200 Subject: [MIPS] IP27: misc fixes - fix PCI interrupt assignment by emulating ioc3 interrupt pin register - use pci_probe_only mode - select correct page size in bridge - remove no longer needed ioc3_sio_init() code [Ralf: Fix for 64kB or larger pagesizes] Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/pci/ops-bridge.c | 20 ++++++++++++++++++-- arch/mips/pci/pci-ip27.c | 8 ++++++++ arch/mips/sgi-ip27/ip27-init.c | 22 ---------------------- 3 files changed, 26 insertions(+), 24 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c index 1fa09929cd7a..b46b3e211775 100644 --- a/arch/mips/pci/ops-bridge.c +++ b/arch/mips/pci/ops-bridge.c @@ -13,6 +13,22 @@ #include #include +/* + * Most of the IOC3 PCI config register aren't present + * we emulate what is needed for a normal PCI enumeration + */ +static u32 emulate_ioc3_cfg(int where, int size) +{ + if (size == 1 && where == 0x3d) + return 0x01; + else if (size == 2 && where == 0x3c) + return 0x0100; + else if (size == 4 && where == 0x3c) + return 0x00000100; + + return 0; +} + /* * The Bridge ASIC supports both type 0 and type 1 access. Type 1 is * not really documented, so right now I can't write code which uses it. @@ -64,7 +80,7 @@ oh_my_gawd: * generic PCI code a chance to look at the wrong register. */ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { - *value = 0; + *value = emulate_ioc3_cfg(where, size); return PCIBIOS_SUCCESSFUL; } @@ -127,7 +143,7 @@ oh_my_gawd: * generic PCI code a chance to look at the wrong register. */ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { - *value = 0; + *value = emulate_ioc3_cfg(where, size); return PCIBIOS_SUCCESSFUL; } diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index bb64828a92fe..a18516925cdd 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -47,6 +47,9 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) static int num_bridges = 0; bridge_t *bridge; int slot; + extern int pci_probe_only; + + pci_probe_only = 1; printk("a bridge\n"); @@ -100,6 +103,11 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) */ bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP | BRIDGE_CTRL_MEM_SWAP; +#ifdef CONFIG_PAGE_SIZE_4KB + bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE; +#else /* 16kB or larger */ + bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE; +#endif /* * Hmm... IRIX sets additional bits in the address which diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index 7093e7c573a4..4a500e8cd3cc 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -161,27 +161,6 @@ cnodeid_t get_compact_nodeid(void) return NASID_TO_COMPACT_NODEID(get_nasid()); } -/* Extracted from the IOC3 meta driver. FIXME. */ -static inline void ioc3_sio_init(void) -{ - struct ioc3 *ioc3; - nasid_t nid; - long loops; - - nid = get_nasid(); - ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base; - - ioc3->sscr_a = 0; /* PIO mode for uarta. */ - ioc3->sscr_b = 0; /* PIO mode for uartb. */ - ioc3->sio_iec = ~0; - ioc3->sio_ies = (SIO_IR_SA_INT | SIO_IR_SB_INT); - - loops=1000000; while(loops--); - ioc3->sregs.uarta.iu_fcr = 0; - ioc3->sregs.uartb.iu_fcr = 0; - loops=1000000; while(loops--); -} - static inline void ioc3_eth_init(void) { struct ioc3 *ioc3; @@ -234,7 +213,6 @@ void __init plat_mem_setup(void) panic("Kernel compiled for N mode."); #endif - ioc3_sio_init(); ioc3_eth_init(); per_cpu_init(); -- cgit v1.2.3 From 482845a348f76fbf9cec6dda0f1eb113d4fafd9d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 26 May 2008 09:47:55 +0100 Subject: [MIPS] Fix build error - Delete debugging crap that crept in with CMP Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/time.c | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 008fd82b5840..fe2cac1b4514 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -58,27 +58,8 @@ static int mips_cpu_timer_irq; static int mips_cpu_perf_irq; extern int cp0_perfcount_irq; -DEFINE_PER_CPU(unsigned int, tickcount); -#define tickcount_this_cpu __get_cpu_var(tickcount) -static unsigned long ledbitmask; - static void mips_timer_dispatch(void) { -#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS) - /* - * Yes, this is very tacky, won't work as expected with SMTC and - * dyntick will break it, - * but it gives me a nice warm feeling during debug - */ -#define LEDBAR 0xbf000408 - if (tickcount_this_cpu++ >= HZ) { - tickcount_this_cpu = 0; - change_bit(smp_processor_id(), &ledbitmask); - smp_wmb(); /* Make sure every one else sees the change */ - /* This will pick up any recent changes made by other CPU's */ - *(unsigned int *)LEDBAR = ledbitmask; - } -#endif do_IRQ(mips_cpu_timer_irq); } -- cgit v1.2.3 From cd9da13d6ef4f4b652a9a885d4a7c80e40fed229 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Wed, 7 May 2008 23:38:15 +0900 Subject: Fix divide by zero error in build_clear_page() and build_copy_page() Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/mm/page.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index d827d6144369..cab81f42eee5 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -310,8 +310,8 @@ void __cpuinit build_clear_page(void) if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) uasm_i_lui(&buf, AT, 0xa000); - off = min(8, pref_bias_clear_store / cache_line_size) * - cache_line_size; + off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size) + * cache_line_size : 0; while (off) { build_clear_pref(&buf, -off); off -= cache_line_size; @@ -454,12 +454,14 @@ void __cpuinit build_copy_page(void) if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) uasm_i_lui(&buf, AT, 0xa000); - off = min(8, pref_bias_copy_load / cache_line_size) * cache_line_size; + off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * + cache_line_size : 0; while (off) { build_copy_load_pref(&buf, -off); off -= cache_line_size; } - off = min(8, pref_bias_copy_store / cache_line_size) * cache_line_size; + off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * + cache_line_size : 0; while (off) { build_copy_store_pref(&buf, -off); off -= cache_line_size; -- cgit v1.2.3 From 497d2adcbf50bccec6c56620d61d77429d23993a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 6 Jun 2008 14:23:06 +0100 Subject: [MIPS] Export empty_zero_page for sake of the ext4 module. Signed-off-by: Ralf Baechle --- arch/mips/mm/init.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/mips') diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index ecd562d2c348..137c14bafd6b 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -71,6 +71,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); * don't have to care about aliases on other CPUs. */ unsigned long empty_zero_page, zero_page_mask; +EXPORT_SYMBOL_GPL(empty_zero_page); /* * Not static inline because used by IP27 special magic initialization code -- cgit v1.2.3 From d0f9cbd4b29c3d208d6b31519cbb940d98d61e7d Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 9 Jun 2008 17:20:03 +0100 Subject: [MIPS] SB1250: Initialize io_map_base Correctly initialize io_map_base for the SB1250 PCI controller as required for proper iomap support. Based on a proposal from Daniel Jacobowitz. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-sb1250.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index 42e4d2c800fa..2a09ad91ec8c 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -207,6 +207,7 @@ struct pci_controller sb1250_controller = { static int __init sb1250_pcibios_init(void) { + void __iomem *io_map_base; uint32_t cmdreg; uint64_t reg; extern int pci_probe_only; @@ -253,12 +254,13 @@ static int __init sb1250_pcibios_init(void) * works correctly with most of Linux's drivers. * XXX ehs: Should this happen in PCI Device mode? */ - - set_io_port_base((unsigned long) - ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 65536)); isa_slot_offset = (unsigned long) ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024); + io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024); + sb1250_controller.io_map_base = io_map_base; + set_io_port_base((unsigned long)io_map_base); + #ifdef CONFIG_SIBYTE_HAS_LDT /* * Also check the LDT bridge's enable, just in case we didn't -- cgit v1.2.3 From 0e27d7931157fa89cc9afb7735095a0d81ce8fec Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 27 May 2008 01:15:16 +0200 Subject: [MIPS] Better load address for big endian SNI RM Use better load address for big endian kernels to avoid clashes with PROM / SASH. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 69648d01acc0..1ec8e35f2e48 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -565,7 +565,11 @@ load-$(CONFIG_BCM47XX) := 0xffffffff80001000 # core-$(CONFIG_SNI_RM) += arch/mips/sni/ cflags-$(CONFIG_SNI_RM) += -Iinclude/asm-mips/mach-rm +ifdef CONFIG_CPU_LITTLE_ENDIAN load-$(CONFIG_SNI_RM) += 0xffffffff80600000 +else +load-$(CONFIG_SNI_RM) += 0xffffffff80030000 +endif all-$(CONFIG_SNI_RM) := vmlinux.ecoff # -- cgit v1.2.3 From 330117ff2723566e8eb7ad43223081b557f1540e Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 27 May 2008 01:15:20 +0200 Subject: [MIPS] Add RM200 with R5000 CPU to known ARC machines RM200 with R5ks have a little bit different arcname. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/fw/arc/identify.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c index 28dfd2e2989a..23066985a734 100644 --- a/arch/mips/fw/arc/identify.c +++ b/arch/mips/fw/arc/identify.c @@ -67,6 +67,11 @@ static struct smatch mach_table[] = { .liname = "SNI RM200_PCI", .type = MACH_SNI_RM200_PCI, .flags = PROM_FLAG_DONT_FREE_TEMP, + }, { + .arcname = "RM200PCI-R5K", + .liname = "SNI RM200_PCI-R5K", + .type = MACH_SNI_RM200_PCI, + .flags = PROM_FLAG_DONT_FREE_TEMP, } }; -- cgit v1.2.3 From 89052bd7b393434f7c573ce6a3b88c5f143586d2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 12 Jun 2008 17:26:02 +0100 Subject: [MIPS] Fix build for PNX platforms. Build error was caused by commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 26 ++++++++++++++++++++++++++ arch/mips/nxp/pnx8550/jbs/board_setup.c | 11 +---------- arch/mips/nxp/pnx8550/stb810/board_setup.c | 10 +--------- 3 files changed, 28 insertions(+), 19 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 643c8bcffff3..c41ea2284954 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1226,6 +1226,28 @@ void au1x00_fixup_config_od(void) } } +/* CP0 hazard avoidance. */ +#define NXP_BARRIER() \ + __asm__ __volatile__( \ + ".set noreorder\n\t" \ + "nop; nop; nop; nop; nop; nop;\n\t" \ + ".set reorder\n\t") + +static void nxp_pr4450_fixup_config(void) +{ + unsigned long config0; + + config0 = read_c0_config(); + + /* clear all three cache coherency fields */ + config0 &= ~(0x7 | (7 << 25) | (7 << 28)); + config0 |= (((_page_cachable_default >> _CACHE_SHIFT) << 0) | + ((_page_cachable_default >> _CACHE_SHIFT) << 25) | + ((_page_cachable_default >> _CACHE_SHIFT) << 28)); + write_c0_config(config0); + NXP_BARRIER(); +} + static int __cpuinitdata cca = -1; static int __init cca_setup(char *str) @@ -1271,6 +1293,10 @@ static void __cpuinit coherency_setup(void) case CPU_AU1500: /* rev. AB */ au1x00_fixup_config_od(); break; + + case PRID_IMP_PR4450: + nxp_pr4450_fixup_config(); + break; } } diff --git a/arch/mips/nxp/pnx8550/jbs/board_setup.c b/arch/mips/nxp/pnx8550/jbs/board_setup.c index f92826e0096d..57dd903ca408 100644 --- a/arch/mips/nxp/pnx8550/jbs/board_setup.c +++ b/arch/mips/nxp/pnx8550/jbs/board_setup.c @@ -47,16 +47,7 @@ void __init board_setup(void) { - unsigned long config0, configpr; - - config0 = read_c0_config(); - - /* clear all three cache coherency fields */ - config0 &= ~(0x7 | (7<<25) | (7<<28)); - config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | - (CONF_CM_DEFAULT<<28)); - write_c0_config(config0); - BARRIER; + unsigned long configpr; configpr = read_c0_config7(); configpr |= (1<<19); /* enable tlb */ diff --git a/arch/mips/nxp/pnx8550/stb810/board_setup.c b/arch/mips/nxp/pnx8550/stb810/board_setup.c index 1282c27cfcb7..af2a55e0b4e9 100644 --- a/arch/mips/nxp/pnx8550/stb810/board_setup.c +++ b/arch/mips/nxp/pnx8550/stb810/board_setup.c @@ -33,15 +33,7 @@ void __init board_setup(void) { - unsigned long config0, configpr; - - config0 = read_c0_config(); - - /* clear all three cache coherency fields */ - config0 &= ~(0x7 | (7<<25) | (7<<28)); - config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | - (CONF_CM_DEFAULT<<28)); - write_c0_config(config0); + unsigned long configpr; configpr = read_c0_config7(); configpr |= (1<<19); /* enable tlb */ -- cgit v1.2.3 From 7bd0fea2c590d94995c2ee0b32e786c1c62621fa Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 30 May 2008 13:07:21 +0900 Subject: [MIPS] Fix the fix for divide by zero error in build_{clear,copy}_page Signed-off-by: Ralf Baechle --- arch/mips/mm/page.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index cab81f42eee5..1edf0cbbeede 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -460,7 +460,7 @@ void __cpuinit build_copy_page(void) build_copy_load_pref(&buf, -off); off -= cache_line_size; } - off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * + off = cache_line_size ? min(8, pref_bias_copy_store / cache_line_size) * cache_line_size : 0; while (off) { build_copy_store_pref(&buf, -off); -- cgit v1.2.3 From 63a4881a7dd45038f46caa7c3c08b88b01cf9473 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 13 Jun 2008 00:14:10 +0100 Subject: [MIPS] Sibyte: Build RTC support as an object Build the SWARM platform library is as an object rather than an archive so that files which only contain symbols used by initcalls and do not provide any symbols that would pull them from an archive still work. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 14 +++++++------- arch/mips/sibyte/swarm/Makefile | 4 ++-- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 1ec8e35f2e48..ad36c946ff96 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -538,19 +538,19 @@ cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \ # Sibyte SWARM board # Sibyte BCM91x80 (BigSur) board # -libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 # diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile index 2d626039195c..1775755a2619 100644 --- a/arch/mips/sibyte/swarm/Makefile +++ b/arch/mips/sibyte/swarm/Makefile @@ -1,3 +1,3 @@ -lib-y = setup.o rtc_xicor1241.o rtc_m41t81.o +obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o -lib-$(CONFIG_KGDB) += dbg_io.o +obj-$(CONFIG_KGDB) += dbg_io.o -- cgit v1.2.3 From 461a082f870c7fc6a0a245e2f93c9f0e3afbeddd Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 13 Jun 2008 00:10:00 +0100 Subject: [MIPS] Bring the SWARM defconfig up to date The SWARM defconfig file has not been regenerated for over a year now. Here is a patch to bring the file up to date. Additionally some important and sometimes confusing changes happened meanwhile. Here is the list of notable corresponding updates to the configuration: 1. CPU_SB1_PASS_2_2 is now selected rather than CPU_SB1_PASS_1. The latter requires a non-standard -msb1-pass1-workarounds option to be supported by GCC and I am told is quite rare anyway. [Ralf: Afaik -msb1-pass1-workarounds is available only in Monta Vista's special Sibyte gcc 3.0 variant and gcc 3.0 is too old to build a modern kernel anyway.] 2. PHYLIB and BROADCOM_PHY are both built in and NETDEV_1000 enabled as required by SB1250_MAC. 3. USB and USB_OHCI_HCD are enabled as there is an OHCI chip onboard. 4. TMPFS is enabled, because I use it. ;-) Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- arch/mips/configs/sb1250-swarm_defconfig | 676 ++++++++++++++++--------------- 1 file changed, 357 insertions(+), 319 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 117470b60e34..4b8799802788 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -1,67 +1,58 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:40 2007 +# Linux kernel version: 2.6.25 +# Sat May 3 00:38:11 2008 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -CONFIG_SIBYTE_SWARM=y -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +CONFIG_SIBYTE_SWARM=y +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set CONFIG_SIBYTE_SB1250=y CONFIG_SIBYTE_SB1xxx_SOC=y -CONFIG_CPU_SB1_PASS_1=y +# CONFIG_CPU_SB1_PASS_1 is not set # CONFIG_CPU_SB1_PASS_2_1250 is not set -# CONFIG_CPU_SB1_PASS_2_2 is not set +CONFIG_CPU_SB1_PASS_2_2=y # CONFIG_CPU_SB1_PASS_4 is not set # CONFIG_CPU_SB1_PASS_2_112x is not set # CONFIG_CPU_SB1_PASS_3 is not set CONFIG_SIBYTE_HAS_LDT=y +CONFIG_SIBYTE_ENABLE_LDT_IF_PCI=y # CONFIG_SIMULATION is not set # CONFIG_SB1_CEX_ALWAYS_FATAL is not set # CONFIG_SB1_CERR_STALL is not set @@ -69,20 +60,32 @@ CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_CFE_CONSOLE is not set # CONFIG_SIBYTE_BUS_WATCHER is not set # CONFIG_SIBYTE_TBPROF is not set +CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_CEVT_SB1250=y +CONFIG_CSRC_SB1250=y +CONFIG_CFE=y CONFIG_DMA_COHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y CONFIG_SWAP_IO_SPACE=y CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 @@ -90,6 +93,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -130,8 +134,7 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_SB1_PASS_1_WORKAROUNDS=y +CONFIG_SB1_PASS_2_WORKAROUNDS=y CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -140,6 +143,7 @@ CONFIG_IRQ_PER_CPU=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_SYS_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -147,13 +151,19 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS_DEFAULT_2=y CONFIG_NR_CPUS=2 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -166,38 +176,49 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=15 CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set CONFIG_CPUSETS=y -CONFIG_SYSFS_DEPRECATED=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_CGROUP_CPUACCT=y +# CONFIG_RESOURCE_COUNTERS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_PROC_PID_CPUSET is not set CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -209,20 +230,29 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -230,12 +260,10 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_BLK_DEV_BSG=y +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -249,22 +277,19 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_ZONE_DMA32=y # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -272,7 +297,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y @@ -286,7 +310,6 @@ CONFIG_BINFMT_ELF32=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set # # Networking @@ -296,7 +319,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -304,6 +326,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -326,6 +349,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -333,24 +357,15 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -363,26 +378,52 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_RFKILL=m +# CONFIG_NET_9P is not set # # Device Drivers @@ -391,34 +432,15 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -427,49 +449,77 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=9220 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_SGI_IOC4=m # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=y CONFIG_BLK_DEV_IDEFLOPPY=y # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDE_SWARM=y -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -477,89 +527,68 @@ CONFIG_BLK_DEV_IDE_SWARM=y # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +CONFIG_NETDEVICES_MULTIQUEUE=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +CONFIG_MACVLAN=m # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m +CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +CONFIG_BROADCOM_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -568,53 +597,70 @@ CONFIG_SB1250_MAC=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m +# CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH5K is not set +# CONFIG_IWLCORE is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -637,24 +683,8 @@ CONFIG_SERIO_RAW=m # Character devices # # CONFIG_VT is not set -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_COMPUTONE is not set -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_MOXA_INTELLIO is not set -# CONFIG_MOXA_SMARTIO is not set -CONFIG_MOXA_SMARTIO_NEW=m -# CONFIG_ISI is not set -# CONFIG_SYNCLINKMP is not set -# CONFIG_SYNCLINK_GT is not set -# CONFIG_N_HDLC is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set -# CONFIG_STALDRV is not set -CONFIG_SERIAL_SB1250_DUART=y -CONFIG_SERIAL_SB1250_DUART_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -664,37 +694,22 @@ CONFIG_SERIAL_SB1250_DUART_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_SB1250_DUART=y +CONFIG_SERIAL_SB1250_DUART_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -702,109 +717,139 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # -# CONFIG_W1 is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# USB support +# Sound # +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # -# USB Gadget Support +# Miscellaneous USB options # -# CONFIG_USB_GADGET is not set +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set # -# MMC/SD Card support +# USB Host Controller Drivers # -# CONFIG_MMC is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # -# LED devices +# USB Device Class drivers # -# CONFIG_NEW_LEDS is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # -# LED drivers +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# LED Triggers +# may also be needed; see USB_STORAGE Help for more information # +# CONFIG_USB_LIBUSUAL is not set # -# InfiniBand support +# USB Imaging devices # -# CONFIG_INFINIBAND is not set +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB port drivers # +# CONFIG_USB_SERIAL is not set # -# Real Time Clock +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -823,15 +868,14 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -853,9 +897,9 @@ CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=m # @@ -871,14 +915,13 @@ CONFIG_CONFIGFS_FS=m # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -890,6 +933,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -897,45 +941,29 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set # CONFIG_DLM_DEBUG is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_CROSSCOMPILE=y +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_SB1XXX_CORELIS is not set @@ -946,13 +974,12 @@ CONFIG_SYS_SUPPORTS_KGDB=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -970,6 +997,11 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m @@ -983,15 +1015,16 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines @@ -999,10 +1032,15 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3 From a9ad02bdbb0193203a477bbd0e833adf9fb29ac4 Mon Sep 17 00:00:00 2001 From: Zenon Fortuna Date: Fri, 16 May 2008 17:29:48 -0700 Subject: [MIPS] Export smp_call_function and smp_call_function_single. Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/kernel/smp.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 63370cdd3c90..cdf87a9dd4ba 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -216,6 +216,7 @@ int smp_call_function(void (*func) (void *info), void *info, int retry, { return smp_call_function_mask(cpu_online_map, func, info, retry, wait); } +EXPORT_SYMBOL(smp_call_function); void smp_call_function_interrupt(void) { @@ -271,6 +272,7 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info, put_cpu(); return 0; } +EXPORT_SYMBOL(smp_call_function_single); static void stop_this_cpu(void *dummy) { -- cgit v1.2.3 From 0c3bd83b0974238a5808d342663c6407512564d0 Mon Sep 17 00:00:00 2001 From: Thomas Horsten Date: Sat, 14 Jun 2008 02:32:42 +0100 Subject: [MIPS] Lasat: bring back from the dead After the common MIPS CPU interrupt controller (for irq0-7) was introduced the Lasat boards didn't get their interrupts right, so nothing worked. The old routines need to be offset by the new 8 hardware interrupts common to all MIPS CPU's. Signed-off-by: Thomas Horsten Signed-off-by: Ralf Baechle --- arch/mips/lasat/interrupt.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index cfeab669782f..a56c15026965 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -34,11 +34,13 @@ static volatile int lasat_int_mask_shift; void disable_lasat_irq(unsigned int irq_nr) { + irq_nr -= LASAT_IRQ_BASE; *lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift; } void enable_lasat_irq(unsigned int irq_nr) { + irq_nr -= LASAT_IRQ_BASE; *lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift; } -- cgit v1.2.3 From c9c5023d83df5dc7d58830a63fd0e082120f00e3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 14 Jun 2008 22:22:08 +0100 Subject: [MIPS] Fix buggy use of kmap_coherent. Assuming the call of kmap_coherent in local_r4k_flush_cache_page doesn't need fixing this was skipped in fcae549295bcae801ac48fc1c2030ab8cc487020. Turns out it needed the same change after all. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index c41ea2284954..27096751ddce 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -446,6 +446,7 @@ static inline void local_r4k_flush_cache_page(void *args) struct page *page = pfn_to_page(fcp_args->pfn); int exec = vma->vm_flags & VM_EXEC; struct mm_struct *mm = vma->vm_mm; + int map_coherent = 0; pgd_t *pgdp; pud_t *pudp; pmd_t *pmdp; @@ -479,7 +480,9 @@ static inline void local_r4k_flush_cache_page(void *args) * Use kmap_coherent or kmap_atomic to do flushes for * another ASID than the current one. */ - if (cpu_has_dc_aliases) + map_coherent = (cpu_has_dc_aliases && + page_mapped(page) && !Page_dcache_dirty(page)); + if (map_coherent) vaddr = kmap_coherent(page, addr); else vaddr = kmap_atomic(page, KM_USER0); @@ -502,7 +505,7 @@ static inline void local_r4k_flush_cache_page(void *args) } if (vaddr) { - if (cpu_has_dc_aliases) + if (map_coherent) kunmap_coherent(); else kunmap_atomic(vaddr, KM_USER0); -- cgit v1.2.3 From 1f34f2e4262bae8a1aa6d8fd6306b07074d33718 Mon Sep 17 00:00:00 2001 From: Thomas Horsten Date: Sun, 15 Jun 2008 02:17:11 +0100 Subject: [MIPS] Lasat: sysctl fixup LASAT's sysctl interface was broken, it failed a check during boot because a single entry had a sysctl number and the rest were unnumbered. When I fixed it I noticed that the whole sysctl file needed a spring clean, it was using mutexes where it wasn't needed (it's only needed to protect during writes to the EEPROM), so I moved that stuff out and generally cleaned the whole thing up. So now, LASAT's sysctl/proc interface is working again. Signed-off-by: Thomas Horsten Signed-off-by: Ralf Baechle --- arch/mips/lasat/lasat_board.c | 13 ++-- arch/mips/lasat/sysctl.c | 172 ++++++++++++------------------------------ arch/mips/lasat/sysctl.h | 24 ------ 3 files changed, 56 insertions(+), 153 deletions(-) delete mode 100644 arch/mips/lasat/sysctl.h (limited to 'arch/mips') diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c index ec2f658c3709..31e328b3814d 100644 --- a/arch/mips/lasat/lasat_board.c +++ b/arch/mips/lasat/lasat_board.c @@ -23,18 +23,19 @@ #include #include #include +#include #include #include #include "at93c.h" /* New model description table */ #include "lasat_models.h" +static DEFINE_MUTEX(lasat_eeprom_mutex); + #define EEPROM_CRC(data, len) (~crc32(~0, data, len)) struct lasat_info lasat_board_info; -void update_bcastaddr(void); - int EEPROMRead(unsigned int pos, unsigned char *data, int len) { int i; @@ -258,10 +259,6 @@ int lasat_init_board_info(void) sprintf(lasat_board_info.li_typestr, "%d", 10 * c); } -#if defined(CONFIG_INET) && defined(CONFIG_SYSCTL) - update_bcastaddr(); -#endif - return 0; } @@ -269,6 +266,8 @@ void lasat_write_eeprom_info(void) { unsigned long crc; + mutex_lock(&lasat_eeprom_mutex); + /* Generate the CRC */ crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info), sizeof(struct lasat_eeprom_struct) - 4); @@ -277,4 +276,6 @@ void lasat_write_eeprom_info(void) /* Write the EEPROM info */ EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info, sizeof(struct lasat_eeprom_struct)); + + mutex_unlock(&lasat_eeprom_mutex); } diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index 389336c4ecc5..866881ec0cf8 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -29,15 +29,13 @@ #include #include #include -#include #include #include -#include "sysctl.h" +#ifdef CONFIG_DS1603 #include "ds1603.h" - -static DEFINE_MUTEX(lasat_info_mutex); +#endif /* Strategy function to write EEPROM after changing string entry */ int sysctl_lasatstring(ctl_table *table, int *name, int nlen, @@ -46,18 +44,15 @@ int sysctl_lasatstring(ctl_table *table, int *name, int nlen, { int r; - mutex_lock(&lasat_info_mutex); r = sysctl_string(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } + if (newval && newlen) lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 1; + return 0; } @@ -67,14 +62,11 @@ int proc_dolasatstring(ctl_table *table, int write, struct file *filp, { int r; - mutex_lock(&lasat_info_mutex); r = proc_dostring(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if ((!write) || r) return r; - } + lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); return 0; } @@ -85,28 +77,24 @@ int proc_dolasatint(ctl_table *table, int write, struct file *filp, { int r; - mutex_lock(&lasat_info_mutex); r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if ((!write) || r) return r; - } + lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); return 0; } +#ifdef CONFIG_DS1603 static int rtctmp; -#ifdef CONFIG_DS1603 /* proc function to read/write RealTime Clock */ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - mutex_lock(&lasat_info_mutex); if (!write) { rtctmp = read_persistent_clock(); /* check for time < 0 and set to 0 */ @@ -114,12 +102,11 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, rtctmp = 0; } r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if (r) return r; - } - rtc_mips_set_mmss(rtctmp); - mutex_unlock(&lasat_info_mutex); + + if (write) + rtc_mips_set_mmss(rtctmp); return 0; } @@ -132,17 +119,14 @@ int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen, { int r; - mutex_lock(&lasat_info_mutex); r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } + if (newval && newlen) lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 1; + return 0; } #ifdef CONFIG_DS1603 @@ -153,50 +137,27 @@ int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen, { int r; - mutex_lock(&lasat_info_mutex); rtctmp = read_persistent_clock(); if (rtctmp < 0) rtctmp = 0; r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } if (newval && newlen) rtc_mips_set_mmss(rtctmp); - mutex_unlock(&lasat_info_mutex); - return 1; + return r; } #endif #ifdef CONFIG_INET -static char lasat_bcastaddr[16]; - -void update_bcastaddr(void) -{ - unsigned int ip; - - ip = (lasat_board_info.li_eeprom_info.ipaddr & - lasat_board_info.li_eeprom_info.netmask) | - ~lasat_board_info.li_eeprom_info.netmask; - - sprintf(lasat_bcastaddr, "%d.%d.%d.%d", - (ip) & 0xff, - (ip >> 8) & 0xff, - (ip >> 16) & 0xff, - (ip >> 24) & 0xff); -} - -static char proc_lasat_ipbuf[32]; - -/* Parsing of IP address */ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { unsigned int ip; char *p, c; int len; + char ipbuf[32]; if (!table->data || !table->maxlen || !*lenp || (*ppos && !write)) { @@ -204,117 +165,88 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, return 0; } - mutex_lock(&lasat_info_mutex); if (write) { len = 0; p = buffer; while (len < *lenp) { - if (get_user(c, p++)) { - mutex_unlock(&lasat_info_mutex); + if (get_user(c, p++)) return -EFAULT; - } if (c == 0 || c == '\n') break; len++; } - if (len >= sizeof(proc_lasat_ipbuf)-1) - len = sizeof(proc_lasat_ipbuf) - 1; - if (copy_from_user(proc_lasat_ipbuf, buffer, len)) { - mutex_unlock(&lasat_info_mutex); + if (len >= sizeof(ipbuf)-1) + len = sizeof(ipbuf) - 1; + if (copy_from_user(ipbuf, buffer, len)) return -EFAULT; - } - proc_lasat_ipbuf[len] = 0; + ipbuf[len] = 0; *ppos += *lenp; /* Now see if we can convert it to a valid IP */ - ip = in_aton(proc_lasat_ipbuf); + ip = in_aton(ipbuf); *(unsigned int *)(table->data) = ip; lasat_write_eeprom_info(); } else { ip = *(unsigned int *)(table->data); - sprintf(proc_lasat_ipbuf, "%d.%d.%d.%d", + sprintf(ipbuf, "%d.%d.%d.%d", (ip) & 0xff, (ip >> 8) & 0xff, (ip >> 16) & 0xff, (ip >> 24) & 0xff); - len = strlen(proc_lasat_ipbuf); + len = strlen(ipbuf); if (len > *lenp) len = *lenp; if (len) - if (copy_to_user(buffer, proc_lasat_ipbuf, len)) { - mutex_unlock(&lasat_info_mutex); + if (copy_to_user(buffer, ipbuf, len)) return -EFAULT; - } if (len < *lenp) { - if (put_user('\n', ((char *) buffer) + len)) { - mutex_unlock(&lasat_info_mutex); + if (put_user('\n', ((char *) buffer) + len)) return -EFAULT; - } len++; } *lenp = len; *ppos += len; } - update_bcastaddr(); - mutex_unlock(&lasat_info_mutex); return 0; } -#endif /* defined(CONFIG_INET) */ +#endif -static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen, +static int sysctl_lasat_prid(ctl_table *table, int *name, int nlen, void *oldval, size_t *oldlenp, void *newval, size_t newlen) { int r; - mutex_lock(&lasat_info_mutex); r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } - if (newval && newlen) { - if (name && *name == LASAT_PRID) - lasat_board_info.li_eeprom_info.prid = *(int *)newval; - + lasat_board_info.li_eeprom_info.prid = *(int *)newval; lasat_write_eeprom_info(); lasat_init_board_info(); } - mutex_unlock(&lasat_info_mutex); - return 0; } -int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp, +int proc_lasat_prid(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - mutex_lock(&lasat_info_mutex); r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; + if (write) { + lasat_board_info.li_eeprom_info.prid = + lasat_board_info.li_prid; + lasat_write_eeprom_info(); + lasat_init_board_info(); } - if (filp && filp->f_path.dentry) { - if (!strcmp(filp->f_path.dentry->d_name.name, "prid")) - lasat_board_info.li_eeprom_info.prid = - lasat_board_info.li_prid; - if (!strcmp(filp->f_path.dentry->d_name.name, "debugaccess")) - lasat_board_info.li_eeprom_info.debugaccess = - lasat_board_info.li_debugaccess; - } - lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 0; } extern int lasat_boot_to_service; -#ifdef CONFIG_SYSCTL - static ctl_table lasat_table[] = { { .ctl_name = CTL_UNNUMBERED, @@ -349,8 +281,8 @@ static ctl_table lasat_table[] = { .data = &lasat_board_info.li_prid, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = &proc_lasat_eeprom_value, - .strategy = &sysctl_lasat_eeprom_value + .proc_handler = &proc_lasat_prid, + .strategy = &sysctl_lasat_prid }, #ifdef CONFIG_INET { @@ -363,7 +295,7 @@ static ctl_table lasat_table[] = { .strategy = &sysctl_lasat_intvec }, { - .ctl_name = LASAT_NETMASK, + .ctl_name = CTL_UNNUMBERED, .procname = "netmask", .data = &lasat_board_info.li_eeprom_info.netmask, .maxlen = sizeof(int), @@ -371,15 +303,6 @@ static ctl_table lasat_table[] = { .proc_handler = &proc_lasat_ip, .strategy = &sysctl_lasat_intvec }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "bcastaddr", - .data = &lasat_bcastaddr, - .maxlen = sizeof(lasat_bcastaddr), - .mode = 0600, - .proc_handler = &proc_dostring, - .strategy = &sysctl_string - }, #endif { .ctl_name = CTL_UNNUMBERED, @@ -417,7 +340,7 @@ static ctl_table lasat_table[] = { .data = &lasat_board_info.li_namestr, .maxlen = sizeof(lasat_board_info.li_namestr), .mode = 0444, - .proc_handler = &proc_dostring, + .proc_handler = &proc_dostring, .strategy = &sysctl_string }, { @@ -448,9 +371,12 @@ static int __init lasat_register_sysctl(void) lasat_table_header = register_sysctl_table(lasat_root_table); + if (!lasat_table_header) { + printk(KERN_ERR "Unable to register LASAT sysctl\n"); + return -ENOMEM; + } return 0; } __initcall(lasat_register_sysctl); -#endif /* CONFIG_SYSCTL */ diff --git a/arch/mips/lasat/sysctl.h b/arch/mips/lasat/sysctl.h deleted file mode 100644 index 341b97933423..000000000000 --- a/arch/mips/lasat/sysctl.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * LASAT sysctl values - */ - -#ifndef _LASAT_SYSCTL_H -#define _LASAT_SYSCTL_H - -/* /proc/sys/lasat */ -enum { - LASAT_CPU_HZ = 1, - LASAT_BUS_HZ, - LASAT_MODEL, - LASAT_PRID, - LASAT_IPADDR, - LASAT_NETMASK, - LASAT_BCAST, - LASAT_PASSWORD, - LASAT_SBOOT, - LASAT_RTC, - LASAT_NAMESTR, - LASAT_TYPESTR, -}; - -#endif /* _LASAT_SYSCTL_H */ -- cgit v1.2.3 From 938b2b14172bd098972df2a5157bfabf161c90e5 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 29 May 2008 22:05:07 +0200 Subject: [MIPS] Malta: Fix build errors for 64-bit kernels Fix 64-bit Malta by using CKSEG0ADDR and correct casts. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/amon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mips-boards/generic/amon.c index b7633fda4180..96236bf33838 100644 --- a/arch/mips/mips-boards/generic/amon.c +++ b/arch/mips/mips-boards/generic/amon.c @@ -28,7 +28,7 @@ int amon_cpu_avail(int cpu) { - struct cpulaunch *launch = (struct cpulaunch *)KSEG0ADDR(CPULAUNCH); + struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); if (cpu < 0 || cpu >= NCPULAUNCH) { pr_debug("avail: cpu%d is out of range\n", cpu); @@ -53,7 +53,7 @@ void amon_cpu_start(int cpu, unsigned long gp, unsigned long a0) { volatile struct cpulaunch *launch = - (struct cpulaunch *)KSEG0ADDR(CPULAUNCH); + (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); if (!amon_cpu_avail(cpu)) return; -- cgit v1.2.3 From b8157180ccd8bb3752f510c6c434b86394636093 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 16 Jun 2008 00:23:39 +0100 Subject: [MIPS] Malta: Always compile MTD platform device registration code. Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/malta/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index 8dc6e2ac4c03..db4ad654a6d3 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile @@ -19,9 +19,8 @@ # under Linux. # -obj-y := malta_int.o malta_platform.o malta_setup.o +obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o -obj-$(CONFIG_MTD) += malta_mtd.o # FIXME FIXME FIXME obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o -- cgit v1.2.3 From f1304b358a6c952e4cd1f92c8a6f183b1026c103 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Mon, 16 Jun 2008 22:51:08 +0900 Subject: [MIPS] Vr41xx: Initialize PCI io_map_base Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-vr41xx.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c index 33c4f683d067..d1e049b55f34 100644 --- a/arch/mips/pci/pci-vr41xx.c +++ b/arch/mips/pci/pci-vr41xx.c @@ -3,7 +3,7 @@ * * Copyright (C) 2001-2003 MontaVista Software Inc. * Author: Yoichi Yuasa - * Copyright (C) 2004-2005 Yoichi Yuasa + * Copyright (C) 2004-2008 Yoichi Yuasa * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can redistribute it and/or modify @@ -300,6 +300,18 @@ static int __init vr41xx_pciu_init(void) ioport_resource.end = IO_PORT_RESOURCE_END; } + if (setup->master_io) { + void __iomem *io_map_base; + struct resource *res = vr41xx_pci_controller.io_resource; + master = setup->master_io; + io_map_base = ioremap(master->bus_base_address, + res->end - res->start + 1); + if (!io_map_base) + return -EBUSY; + + vr41xx_pci_controller.io_map_base = (unsigned long)io_map_base; + } + register_pci_controller(&vr41xx_pci_controller); return 0; -- cgit v1.2.3 From b185194ef0691c8068c7d764aa8f78899d05512a Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Mon, 16 Jun 2008 22:54:16 +0900 Subject: [MIPS] TANBAC: Update defconfig These boards need cca setup on CMDLINE. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/configs/tb0219_defconfig | 192 +++++++++++++++++----------------- arch/mips/configs/tb0226_defconfig | 192 +++++++++++++++++----------------- arch/mips/configs/tb0287_defconfig | 207 ++++++++++++++++++++----------------- 3 files changed, 303 insertions(+), 288 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index af82e1a1823c..8dd3ae39bcad 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Wed Aug 8 16:11:47 2007 +# Linux kernel version: 2.6.26-rc1 +# Mon May 12 11:54:51 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set @@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_HOTPLUG_CPU is not set @@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -156,23 +171,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -185,10 +206,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -212,18 +242,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -237,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -278,6 +308,7 @@ CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -285,15 +316,10 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -# CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -306,10 +332,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -317,6 +339,7 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -339,6 +362,7 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -360,10 +384,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -375,10 +400,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # @@ -394,6 +415,7 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=m @@ -409,7 +431,8 @@ CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set -# CONFIG_FIXED_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -420,6 +443,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -427,7 +454,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_TC35815 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -439,6 +465,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -451,6 +478,10 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -472,6 +503,7 @@ CONFIG_VIA_VELOCITY=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -480,14 +512,12 @@ CONFIG_VIA_VELOCITY=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -506,7 +536,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -533,7 +562,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -552,52 +583,62 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_GPIO_TB0219=y -# CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support @@ -616,6 +657,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -624,15 +666,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -665,10 +710,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -694,17 +735,11 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -729,9 +764,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -740,23 +776,6 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_VR41XX=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -771,20 +790,16 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=m +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -813,7 +828,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -828,24 +842,21 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -866,47 +877,38 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index a95385b24546..2ba240e897c6 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Thu Aug 9 11:16:55 2007 +# Linux kernel version: 2.6.26-rc1 +# Mon May 12 11:53:54 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set @@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_HOTPLUG_CPU is not set @@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -156,23 +171,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -185,10 +206,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -212,18 +242,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -237,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -277,6 +307,7 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -284,15 +315,10 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -# CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -305,10 +331,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -316,6 +338,7 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -338,6 +361,7 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -359,10 +383,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -402,18 +427,13 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +# CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -428,6 +448,7 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -440,6 +461,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -447,7 +472,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_TC35815 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set @@ -455,6 +479,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -470,6 +495,7 @@ CONFIG_E100=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -478,7 +504,6 @@ CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -486,7 +511,6 @@ CONFIG_USB_RTL8150=m # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -505,7 +529,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -532,7 +555,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -551,52 +576,62 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_GPIO_TB0219 is not set -# CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support @@ -615,6 +650,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -623,15 +659,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -657,13 +696,16 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -676,10 +718,6 @@ CONFIG_USB_STORAGE=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -705,17 +743,11 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -740,9 +772,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -751,23 +784,6 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_VR41XX=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -782,14 +798,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=m +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -818,7 +831,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -833,24 +845,21 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -871,47 +880,38 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=32M console=ttyVR0,115200" +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200" # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=m +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 40d4a40a970e..a5d0f3c55ed1 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Thu Aug 9 14:03:54 2007 +# Linux kernel version: 2.6.26-rc1 +# Mon May 12 11:55:55 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set @@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_HOTPLUG_CPU is not set @@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -156,12 +171,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -173,6 +191,8 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -185,10 +205,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -212,18 +241,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -237,6 +265,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -278,6 +307,7 @@ CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y @@ -302,8 +332,6 @@ CONFIG_DEFAULT_BIC=y CONFIG_DEFAULT_TCP_CONG="bic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -320,10 +348,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -331,6 +355,7 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -353,6 +378,7 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -374,10 +400,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -416,10 +443,14 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -429,7 +460,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -458,7 +488,9 @@ CONFIG_ATA=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set @@ -472,15 +504,9 @@ CONFIG_PATA_SIL680=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -520,6 +546,7 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -532,6 +559,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -539,7 +570,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_TC35815 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -551,6 +581,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -563,6 +594,10 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -584,6 +619,7 @@ CONFIG_VIA_VELOCITY=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -592,7 +628,6 @@ CONFIG_VIA_VELOCITY=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -600,7 +635,6 @@ CONFIG_VIA_VELOCITY=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -622,7 +656,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -649,7 +682,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -668,49 +703,53 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_GPIO_TB0219 is not set -# CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y @@ -719,9 +758,11 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set @@ -757,7 +798,14 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set CONFIG_FB_SM501=y +# CONFIG_FB_COBALT is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -787,6 +835,7 @@ CONFIG_FONT_8x16=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -807,6 +856,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -815,15 +865,18 @@ CONFIG_USB=m CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -849,13 +902,16 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -868,10 +924,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -896,36 +948,14 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -940,25 +970,21 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y -# CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=m +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -987,7 +1013,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1002,24 +1027,21 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1040,47 +1062,38 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set -- cgit v1.2.3 From dab8c6deaf1d654d09c3de8bd4c286d424df255a Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 8 May 2008 23:06:17 +0400 Subject: [MIPS] Au1200: MMC resource size off by one Au12x0 MMC platform device strangely claims 0x41 bytes for its memory-mapped registers. Make it claim the whole 0x80000 instead according to the memory map given in the datasheets. Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/platform.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 8cae7753ef79..74d6d4a593be 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -165,12 +165,12 @@ static struct resource au1xxx_usb_gdt_resources[] = { static struct resource au1xxx_mmc_resources[] = { [0] = { .start = SD0_PHYS_ADDR, - .end = SD0_PHYS_ADDR + 0x40, + .end = SD0_PHYS_ADDR + 0x7ffff, .flags = IORESOURCE_MEM, }, [1] = { .start = SD1_PHYS_ADDR, - .end = SD1_PHYS_ADDR + 0x40, + .end = SD1_PHYS_ADDR + 0x7ffff, .flags = IORESOURCE_MEM, }, [2] = { -- cgit v1.2.3 From 52e7c5e08201e20ddbe93cb1977869c38072bc2f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 20 May 2008 19:15:36 +0200 Subject: basler-excite: BKL pushdown Signed-off-by: Arnd Bergmann --- arch/mips/basler/excite/excite_iodev.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c index 476d20e08d0e..a1e3526b4a94 100644 --- a/arch/mips/basler/excite/excite_iodev.c +++ b/arch/mips/basler/excite/excite_iodev.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "excite_iodev.h" @@ -110,8 +111,14 @@ static int __exit iodev_remove(struct device *dev) static int iodev_open(struct inode *i, struct file *f) { - return request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED, + int ret; + + lock_kernel(); + ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED, iodev_name, &miscdev); + unlock_kernel(); + + return ret; } static int iodev_release(struct inode *i, struct file *f) -- cgit v1.2.3 From 2f304c0a0a55072b80957580f1b66256a615d8da Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 17 Jun 2008 10:45:23 +0200 Subject: mips: convert to generic helpers for IPI function calls This converts mips to use the new helpers for smp_call_function() and friends, and adds support for smp_call_function_single(). Not tested, but it compiles. mips shares the same IPI for smp_call_function() and smp_call_function_single(), since not all mips platforms have enough available IPIs to support seperate setups. Cc: Ralf Baechle Signed-off-by: Jens Axboe --- arch/mips/Kconfig | 1 + arch/mips/kernel/smp.c | 141 ++++-------------------------------------------- arch/mips/kernel/smtc.c | 1 - 3 files changed, 12 insertions(+), 131 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e5a7c5d96364..ea70d5a225ca 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1763,6 +1763,7 @@ config SMP bool "Multi-Processing support" depends on SYS_SUPPORTS_SMP select IRQ_PER_CPU + select USE_GENERIC_SMP_HELPERS help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index cdf87a9dd4ba..c75b26cb61df 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -131,148 +131,29 @@ asmlinkage __cpuinit void start_secondary(void) cpu_idle(); } -DEFINE_SPINLOCK(smp_call_lock); - -struct call_data_struct *call_data; - -/* - * Run a function on all other CPUs. - * - * cpuset_t of all processors to run the function on. - * The function to run. This must be fast and non-blocking. - * An arbitrary pointer to pass to the function. - * If true, keep retrying until ready. - * If true, wait until function has completed on other CPUs. - * [RETURNS] 0 on success, else a negative status code. - * - * Does not return until remote CPUs are nearly ready to execute - * or are or have executed. - * - * You must not call this function with disabled interrupts or from a - * hardware interrupt handler or from a bottom half handler: - * - * CPU A CPU B - * Disable interrupts - * smp_call_function() - * Take call_lock - * Send IPIs - * Wait for all cpus to acknowledge IPI - * CPU A has not responded, spin waiting - * for cpu A to respond, holding call_lock - * smp_call_function() - * Spin waiting for call_lock - * Deadlock Deadlock - */ -int smp_call_function_mask(cpumask_t mask, void (*func) (void *info), - void *info, int retry, int wait) +void arch_send_call_function_ipi(cpumask_t mask) { - struct call_data_struct data; - int cpu = smp_processor_id(); - int cpus; - - /* - * Can die spectacularly if this CPU isn't yet marked online - */ - BUG_ON(!cpu_online(cpu)); - - cpu_clear(cpu, mask); - cpus = cpus_weight(mask); - if (!cpus) - return 0; - - /* Can deadlock when called with interrupts disabled */ - WARN_ON(irqs_disabled()); - - data.func = func; - data.info = info; - atomic_set(&data.started, 0); - data.wait = wait; - if (wait) - atomic_set(&data.finished, 0); - - spin_lock(&smp_call_lock); - call_data = &data; - smp_mb(); - - /* Send a message to all other CPUs and wait for them to respond */ mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION); - - /* Wait for response */ - /* FIXME: lock-up detection, backtrace on lock-up */ - while (atomic_read(&data.started) != cpus) - barrier(); - - if (wait) - while (atomic_read(&data.finished) != cpus) - barrier(); - call_data = NULL; - spin_unlock(&smp_call_lock); - - return 0; } -int smp_call_function(void (*func) (void *info), void *info, int retry, - int wait) +/* + * We reuse the same vector for the single IPI + */ +void arch_send_call_function_single_ipi(int cpu) { - return smp_call_function_mask(cpu_online_map, func, info, retry, wait); + mp_ops->send_ipi_mask(cpumask_of_cpu(cpu), SMP_CALL_FUNCTION); } -EXPORT_SYMBOL(smp_call_function); +/* + * Call into both interrupt handlers, as we share the IPI for them + */ void smp_call_function_interrupt(void) { - void (*func) (void *info) = call_data->func; - void *info = call_data->info; - int wait = call_data->wait; - - /* - * Notify initiating CPU that I've grabbed the data and am - * about to execute the function. - */ - smp_mb(); - atomic_inc(&call_data->started); - - /* - * At this point the info structure may be out of scope unless wait==1. - */ irq_enter(); - (*func)(info); + generic_smp_call_function_single_interrupt(); + generic_smp_call_function_interrupt(); irq_exit(); - - if (wait) { - smp_mb(); - atomic_inc(&call_data->finished); - } -} - -int smp_call_function_single(int cpu, void (*func) (void *info), void *info, - int retry, int wait) -{ - int ret, me; - - /* - * Can die spectacularly if this CPU isn't yet marked online - */ - if (!cpu_online(cpu)) - return 0; - - me = get_cpu(); - BUG_ON(!cpu_online(me)); - - if (cpu == me) { - local_irq_disable(); - func(info); - local_irq_enable(); - put_cpu(); - return 0; - } - - ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, retry, - wait); - - put_cpu(); - return 0; } -EXPORT_SYMBOL(smp_call_function_single); static void stop_this_cpu(void *dummy) { diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 3e863186cd22..a516286532ab 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -877,7 +877,6 @@ static void ipi_resched_interrupt(void) /* Return from interrupt should be enough to cause scheduler check */ } - static void ipi_call_interrupt(void) { /* Invoke generic function invocation code in smp.c */ -- cgit v1.2.3 From 8691e5a8f691cc2a4fda0651e8d307aaba0e7d68 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 6 Jun 2008 11:18:06 +0200 Subject: smp_call_function: get rid of the unused nonatomic/retry argument It's never used and the comments refer to nonatomic and retry interchangably. So get rid of it. Acked-by: Jeremy Fitzhardinge Signed-off-by: Jens Axboe --- arch/mips/kernel/smp.c | 4 ++-- arch/mips/mm/c-r4k.c | 18 +++++++++--------- arch/mips/pmc-sierra/yosemite/prom.c | 2 +- arch/mips/sibyte/cfe/setup.c | 2 +- arch/mips/sibyte/sb1250/prom.c | 2 +- 5 files changed, 14 insertions(+), 14 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index c75b26cb61df..7a9ae830be86 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -167,7 +167,7 @@ static void stop_this_cpu(void *dummy) void smp_send_stop(void) { - smp_call_function(stop_this_cpu, NULL, 1, 0); + smp_call_function(stop_this_cpu, NULL, 0); } void __init smp_cpus_done(unsigned int max_cpus) @@ -266,7 +266,7 @@ static void flush_tlb_mm_ipi(void *mm) static inline void smp_on_other_tlbs(void (*func) (void *info), void *info) { #ifndef CONFIG_MIPS_MT_SMTC - smp_call_function(func, info, 1, 1); + smp_call_function(func, info, 1); #endif } diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 27096751ddce..71df3390c07b 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -43,12 +43,12 @@ * primary cache. */ static inline void r4k_on_each_cpu(void (*func) (void *info), void *info, - int retry, int wait) + int wait) { preempt_disable(); #if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC) - smp_call_function(func, info, retry, wait); + smp_call_function(func, info, wait); #endif func(info); preempt_enable(); @@ -350,7 +350,7 @@ static inline void local_r4k___flush_cache_all(void * args) static void r4k___flush_cache_all(void) { - r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1); + r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1); } static inline int has_valid_asid(const struct mm_struct *mm) @@ -397,7 +397,7 @@ static void r4k_flush_cache_range(struct vm_area_struct *vma, int exec = vma->vm_flags & VM_EXEC; if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) - r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1); } static inline void local_r4k_flush_cache_mm(void * args) @@ -429,7 +429,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm) if (!cpu_has_dc_aliases) return; - r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1); } struct flush_cache_page_args { @@ -521,7 +521,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma, args.addr = addr; args.pfn = pfn; - r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1); } static inline void local_r4k_flush_data_cache_page(void * addr) @@ -535,7 +535,7 @@ static void r4k_flush_data_cache_page(unsigned long addr) local_r4k_flush_data_cache_page((void *)addr); else r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, - 1, 1); + 1); } struct flush_icache_range_args { @@ -571,7 +571,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end) args.start = start; args.end = end; - r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1); + r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1); instruction_hazard(); } @@ -672,7 +672,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg) static void r4k_flush_cache_sigtramp(unsigned long addr) { - r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1); + r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1); } static void r4k_flush_icache_all(void) diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c index 35dc435846a6..cf4c868715ac 100644 --- a/arch/mips/pmc-sierra/yosemite/prom.c +++ b/arch/mips/pmc-sierra/yosemite/prom.c @@ -64,7 +64,7 @@ static void prom_exit(void) #ifdef CONFIG_SMP if (smp_processor_id()) /* CPU 1 */ - smp_call_function(prom_cpu0_exit, NULL, 1, 1); + smp_call_function(prom_cpu0_exit, NULL, 1); #endif prom_cpu0_exit(NULL); } diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c index 33fce826f8bf..fd9604d5555a 100644 --- a/arch/mips/sibyte/cfe/setup.c +++ b/arch/mips/sibyte/cfe/setup.c @@ -74,7 +74,7 @@ static void __noreturn cfe_linux_exit(void *arg) if (!reboot_smp) { /* Get CPU 0 to do the cfe_exit */ reboot_smp = 1; - smp_call_function(cfe_linux_exit, arg, 1, 0); + smp_call_function(cfe_linux_exit, arg, 0); } } else { printk("Passing control back to CFE...\n"); diff --git a/arch/mips/sibyte/sb1250/prom.c b/arch/mips/sibyte/sb1250/prom.c index cf8f6b3de86c..65b1af66b674 100644 --- a/arch/mips/sibyte/sb1250/prom.c +++ b/arch/mips/sibyte/sb1250/prom.c @@ -66,7 +66,7 @@ static void prom_linux_exit(void) { #ifdef CONFIG_SMP if (smp_processor_id()) { - smp_call_function(prom_cpu0_exit, NULL, 1, 1); + smp_call_function(prom_cpu0_exit, NULL, 1); } #endif while(1); -- cgit v1.2.3 From 15c8b6c1aaaf1c4edd67e2f02e4d8e1bd1a51c0d Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 9 May 2008 09:39:44 +0200 Subject: on_each_cpu(): kill unused 'retry' parameter It's not even passed on to smp_call_function() anymore, since that was removed. So kill it. Acked-by: Jeremy Fitzhardinge Reviewed-by: Paul E. McKenney Signed-off-by: Jens Axboe --- arch/mips/kernel/irq-rm9000.c | 4 ++-- arch/mips/kernel/smp.c | 4 ++-- arch/mips/oprofile/common.c | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c index ed9febe63d72..b47e4615ec12 100644 --- a/arch/mips/kernel/irq-rm9000.c +++ b/arch/mips/kernel/irq-rm9000.c @@ -49,7 +49,7 @@ static void local_rm9k_perfcounter_irq_startup(void *args) static unsigned int rm9k_perfcounter_irq_startup(unsigned int irq) { - on_each_cpu(local_rm9k_perfcounter_irq_startup, (void *) irq, 0, 1); + on_each_cpu(local_rm9k_perfcounter_irq_startup, (void *) irq, 1); return 0; } @@ -66,7 +66,7 @@ static void local_rm9k_perfcounter_irq_shutdown(void *args) static void rm9k_perfcounter_irq_shutdown(unsigned int irq) { - on_each_cpu(local_rm9k_perfcounter_irq_shutdown, (void *) irq, 0, 1); + on_each_cpu(local_rm9k_perfcounter_irq_shutdown, (void *) irq, 1); } static struct irq_chip rm9k_irq_controller = { diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 7a9ae830be86..4410f172b8ab 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -246,7 +246,7 @@ static void flush_tlb_all_ipi(void *info) void flush_tlb_all(void) { - on_each_cpu(flush_tlb_all_ipi, NULL, 1, 1); + on_each_cpu(flush_tlb_all_ipi, NULL, 1); } static void flush_tlb_mm_ipi(void *mm) @@ -366,7 +366,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) .addr2 = end, }; - on_each_cpu(flush_tlb_kernel_range_ipi, &fd, 1, 1); + on_each_cpu(flush_tlb_kernel_range_ipi, &fd, 1); } static void flush_tlb_page_ipi(void *info) diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index b5f6f71b27bc..dd2fbd6645c1 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -27,7 +27,7 @@ static int op_mips_setup(void) model->reg_setup(ctr); /* Configure the registers on all cpus. */ - on_each_cpu(model->cpu_setup, NULL, 0, 1); + on_each_cpu(model->cpu_setup, NULL, 1); return 0; } @@ -58,7 +58,7 @@ static int op_mips_create_files(struct super_block * sb, struct dentry * root) static int op_mips_start(void) { - on_each_cpu(model->cpu_start, NULL, 0, 1); + on_each_cpu(model->cpu_start, NULL, 1); return 0; } @@ -66,7 +66,7 @@ static int op_mips_start(void) static void op_mips_stop(void) { /* Disable performance monitoring for all counters. */ - on_each_cpu(model->cpu_stop, NULL, 0, 1); + on_each_cpu(model->cpu_stop, NULL, 1); } int __init oprofile_arch_init(struct oprofile_operations *ops) -- cgit v1.2.3 From 0aea531326d1a17ccef7d9a538429c5b32cf4f12 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 18 Jun 2008 01:33:32 +0300 Subject: PCI: remove unused arch pcibios_update_resource() functions Russell King did the following back in 2003: <-- snip --> [PCI] pci-9: Kill per-architecture pcibios_update_resource() Kill pcibios_update_resource(), replacing it with pci_update_resource(). pci_update_resource() uses pcibios_resource_to_bus() to convert a resource to a device BAR - the transformation should be exactly the same as the transformation used for the PCI bridges. pci_update_resource "knows" about 64-bit BARs, but doesn't attempt to set the high 32-bits to anything non-zero - currently no architecture attempts to do something different. If anyone cares, please fix; I'm going to reflect current behaviour for the time being. Ivan pointed out the following architectures need to examine their pcibios_update_resource() implementation - they should make sure that this new implementation does the right thing. #warning's have been added where appropriate. ia64 mips mips64 This cset also includes a fix for the problem reported by AKPM where 64-bit arch compilers complain about the resource mask being placed in a u32. <-- snip --> This patch removes the unused pcibios_update_resource() functions the kernel gained since, from FRV, m68k, mips & sh architectures. Signed-off-by: Adrian Bunk Acked-by: David Howells Acked-by: Greg Ungerer Acked-by: Paul Mundt Acked-by: Ralf Baechle Signed-off-by: Jesse Barnes --- arch/mips/pmc-sierra/yosemite/ht.c | 36 ------------------------------------ 1 file changed, 36 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c index 6380662bbf3c..678388fd34b1 100644 --- a/arch/mips/pmc-sierra/yosemite/ht.c +++ b/arch/mips/pmc-sierra/yosemite/ht.c @@ -345,42 +345,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pcibios_enable_resources(dev); } - - -void pcibios_update_resource(struct pci_dev *dev, struct resource *root, - struct resource *res, int resource) -{ - u32 new, check; - int reg; - - return; - - new = res->start | (res->flags & PCI_REGION_FLAG_MASK); - if (resource < 6) { - reg = PCI_BASE_ADDRESS_0 + 4 * resource; - } else if (resource == PCI_ROM_RESOURCE) { - res->flags |= IORESOURCE_ROM_ENABLE; - reg = dev->rom_base_reg; - } else { - /* - * Somebody might have asked allocation of a non-standard - * resource - */ - return; - } - - pci_write_config_dword(dev, reg, new); - pci_read_config_dword(dev, reg, &check); - if ((new ^ check) & - ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : - PCI_BASE_ADDRESS_MEM_MASK)) { - printk(KERN_ERR "PCI: Error while updating region " - "%s/%d (%08x != %08x)\n", pci_name(dev), resource, - new, check); - } -} - - void pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) { -- cgit v1.2.3 From 7b4c9505f2fd82b117dd015b561f723b9a5dab79 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 3 Jul 2008 09:17:55 +0200 Subject: stacktrace: export save_stack_trace[_tsk] Andrew Morton reported this against linux-next: ERROR: ".save_stack_trace" [tests/backtracetest.ko] undefined! Reported-by: Andrew Morton Signed-off-by: Ingo Molnar --- arch/mips/kernel/stacktrace.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/mips') diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c index ebd9db8d1ece..5eb4681a73d2 100644 --- a/arch/mips/kernel/stacktrace.c +++ b/arch/mips/kernel/stacktrace.c @@ -73,3 +73,4 @@ void save_stack_trace(struct stack_trace *trace) prepare_frametrace(regs); save_context_stack(trace, regs); } +EXPORT_SYMBOL_GPL(save_stack_trace); -- cgit v1.2.3 From 1faf7f25b2aa4fcd2ae0ec2fd2e9fb9ff4bfee10 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 24 Jun 2008 00:48:05 +0200 Subject: [MIPS] IP32: Fix unexpected irq 71 It's possible that the crime interrupt handler is called without pending interrupts (probably a hardware issue). To avoid irritating "unexpected irq 71" messages, we now just ignore the spurious crime interrupts. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-irq.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index b0ea0e43ba48..0d6b6663d5f6 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -425,6 +425,11 @@ static void ip32_irq0(void) BUILD_BUG_ON(MACEISA_SERIAL2_RDMAOR_IRQ - MACEISA_AUDIO_SW_IRQ != 31); crime_int = crime->istat & crime_mask; + + /* crime sometime delivers spurious interrupts, ignore them */ + if (unlikely(crime_int == 0)) + return; + irq = MACE_VID_IN1_IRQ + __ffs(crime_int); if (crime_int & CRIME_MACEISA_INT_MASK) { -- cgit v1.2.3 From 7e3297dc280f88ec0c6619a895f3d449776f952e Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Fri, 27 Jun 2008 23:52:26 +0200 Subject: [MIPS] IP22: Fix crashes due to wrong L1_CACHE_BYTES The introduction of a real dma cache invalidate makes it important to have a correct cache line size, otherwise the kernel will gives out two memory segment, which might share one cache line. The R4400 Indy/Indigo2 CPU modules are using a second level cache line size of 128 bytes, so MIPS_L1_CACHE_SHIFT needs to be bumped up to 7 for IP22. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e5a7c5d96364..24c5dee91768 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1006,7 +1006,7 @@ config BOOT_ELF32 config MIPS_L1_CACHE_SHIFT int default "4" if MACH_DECSTATION - default "7" if SGI_IP27 || SGI_IP28 || SNI_RM + default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM default "4" if PMC_MSP4200_EVAL default "5" -- cgit v1.2.3 From 8986d2f50e1a9ba63f64ccbf59181886aa7898c3 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 24 Jun 2008 23:26:38 +0900 Subject: [MIPS] cevt-txx9: Reset timer counter on initialization The txx9_tmr_init() will not clear a timer counter register in a certain case. The counter register is cleared on 1->0 transition of TCE bit if CRE=1. So just clearing the TCE bit is not enough. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/cevt-txx9.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c index 795cb8fb0d74..b5fc4eb412d2 100644 --- a/arch/mips/kernel/cevt-txx9.c +++ b/arch/mips/kernel/cevt-txx9.c @@ -161,6 +161,9 @@ void __init txx9_tmr_init(unsigned long baseaddr) struct txx9_tmr_reg __iomem *tmrptr; tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg)); + /* Start once to make CounterResetEnable effective */ + __raw_writel(TXx9_TMTCR_CRE | TXx9_TMTCR_TCE, &tmrptr->tcr); + /* Stop and reset the counter */ __raw_writel(TXx9_TMTCR_CRE, &tmrptr->tcr); __raw_writel(0, &tmrptr->tisr); __raw_writel(0xffffffff, &tmrptr->cpra); -- cgit v1.2.3 From b32dfbb9c54393af32761add16e249664193621f Mon Sep 17 00:00:00 2001 From: Shane McDonald Date: Sat, 5 Jul 2008 17:19:42 -0600 Subject: [MIPS] Atlas, decstation: Fix section mismatches triggered by defconfigs Resolve these mismatches by defining affected functions with the __cpuinit attribute, rather than __init. Signed-off-by: Shane McDonald Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r3k.c | 6 +++--- arch/mips/mm/sc-rm7k.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c index 76935e320214..27a5b466c85c 100644 --- a/arch/mips/mm/c-r3k.c +++ b/arch/mips/mm/c-r3k.c @@ -26,7 +26,7 @@ static unsigned long icache_size, dcache_size; /* Size in bytes */ static unsigned long icache_lsize, dcache_lsize; /* Size in bytes */ -unsigned long __init r3k_cache_size(unsigned long ca_flags) +unsigned long __cpuinit r3k_cache_size(unsigned long ca_flags) { unsigned long flags, status, dummy, size; volatile unsigned long *p; @@ -61,7 +61,7 @@ unsigned long __init r3k_cache_size(unsigned long ca_flags) return size * sizeof(*p); } -unsigned long __init r3k_cache_lsize(unsigned long ca_flags) +unsigned long __cpuinit r3k_cache_lsize(unsigned long ca_flags) { unsigned long flags, status, lsize, i; volatile unsigned long *p; @@ -90,7 +90,7 @@ unsigned long __init r3k_cache_lsize(unsigned long ca_flags) return lsize * sizeof(*p); } -static void __init r3k_probe_cache(void) +static void __cpuinit r3k_probe_cache(void) { dcache_size = r3k_cache_size(ST0_ISC); if (dcache_size) diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c index fc227f3b1199..e3abfb2d7e86 100644 --- a/arch/mips/mm/sc-rm7k.c +++ b/arch/mips/mm/sc-rm7k.c @@ -86,7 +86,7 @@ static void rm7k_sc_inv(unsigned long addr, unsigned long size) /* * This function is executed in uncached address space. */ -static __init void __rm7k_sc_enable(void) +static __cpuinit void __rm7k_sc_enable(void) { int i; @@ -107,7 +107,7 @@ static __init void __rm7k_sc_enable(void) } } -static __init void rm7k_sc_enable(void) +static __cpuinit void rm7k_sc_enable(void) { if (read_c0_config() & RM7K_CONF_SE) return; -- cgit v1.2.3 From 14defd90f5281da8a1bf43bc789efbafe5991cd8 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 8 Jul 2008 14:46:34 +0200 Subject: [MIPS] Fix 32bit kernels on R4k with 128 byte cache line size The generated copy_page for R4k CPU with a 128 byte cache line size used Create Dirty Exclusive cache line operations even if only part of the cache line was filled. This change avoids generating cache operations, if only part of the cache line size is copied in one loop. It also increases the maxmimum loop size, because the generated code even fits into the available space for r4k CPUs with 128 byte cache line size. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/mm/page.c | 61 ++++++++++++++++++++++++++++------------------------- 1 file changed, 32 insertions(+), 29 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index 1edf0cbbeede..1417c6494858 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -235,13 +235,12 @@ static void __cpuinit set_prefetch_parameters(void) } /* * Too much unrolling will overflow the available space in - * clear_space_array / copy_page_array. 8 words sounds generous, - * but a R4000 with 128 byte L2 line length can exceed even that. + * clear_space_array / copy_page_array. */ - half_clear_loop_size = min(8 * clear_word_size, + half_clear_loop_size = min(16 * clear_word_size, max(cache_line_size >> 1, 4 * clear_word_size)); - half_copy_loop_size = min(8 * copy_word_size, + half_copy_loop_size = min(16 * copy_word_size, max(cache_line_size >> 1, 4 * copy_word_size)); } @@ -263,21 +262,23 @@ static inline void __cpuinit build_clear_pref(u32 **buf, int off) if (pref_bias_clear_store) { uasm_i_pref(buf, pref_dst_mode, pref_bias_clear_store + off, A0); - } else if (cpu_has_cache_cdex_s) { - uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0); - } else if (cpu_has_cache_cdex_p) { - if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) { - uasm_i_nop(buf); - uasm_i_nop(buf); - uasm_i_nop(buf); - uasm_i_nop(buf); - } + } else if (cache_line_size == (half_clear_loop_size << 1)) { + if (cpu_has_cache_cdex_s) { + uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0); + } else if (cpu_has_cache_cdex_p) { + if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) { + uasm_i_nop(buf); + uasm_i_nop(buf); + uasm_i_nop(buf); + uasm_i_nop(buf); + } - if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) - uasm_i_lw(buf, ZERO, ZERO, AT); + if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) + uasm_i_lw(buf, ZERO, ZERO, AT); - uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0); - } + uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0); + } + } } void __cpuinit build_clear_page(void) @@ -403,20 +404,22 @@ static inline void build_copy_store_pref(u32 **buf, int off) if (pref_bias_copy_store) { uasm_i_pref(buf, pref_dst_mode, pref_bias_copy_store + off, A0); - } else if (cpu_has_cache_cdex_s) { - uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0); - } else if (cpu_has_cache_cdex_p) { - if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) { - uasm_i_nop(buf); - uasm_i_nop(buf); - uasm_i_nop(buf); - uasm_i_nop(buf); - } + } else if (cache_line_size == (half_copy_loop_size << 1)) { + if (cpu_has_cache_cdex_s) { + uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0); + } else if (cpu_has_cache_cdex_p) { + if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) { + uasm_i_nop(buf); + uasm_i_nop(buf); + uasm_i_nop(buf); + uasm_i_nop(buf); + } - if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) - uasm_i_lw(buf, ZERO, ZERO, AT); + if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) + uasm_i_lw(buf, ZERO, ZERO, AT); - uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0); + uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0); + } } } -- cgit v1.2.3 From 392a0408fdc4c9069c32a9a02b0088eae76c4618 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 14 Jul 2008 22:38:33 +0200 Subject: i2c-sibyte: SWARM I2C board initialization The standard rtc-m41t80.c driver cannot be used with the SWARM as it is, because the board does not provide setup information for the I2C core. As a result the bus and the address to probe for the M41T80 chip is not known. Here is a set of changes that fix the problem: 1. swarm-i2c.c -- SWARM I2C board setup, currently for the M41T80 chip on the bus #1 only (there is a MAX6654 temperature sensor on the bus #0 which may be added in the future if we have a driver for that chip). 2. The i2c-sibyte.c BCM1250A SMBus controller driver now registers its buses as numbered so that board setup is correctly applied. Signed-off-by: Maciej W. Rozycki Signed-off-by: Jean Delvare --- arch/mips/sibyte/swarm/Makefile | 1 + arch/mips/sibyte/swarm/swarm-i2c.c | 37 +++++++++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+) create mode 100644 arch/mips/sibyte/swarm/swarm-i2c.c (limited to 'arch/mips') diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile index 1775755a2619..255d692bfa18 100644 --- a/arch/mips/sibyte/swarm/Makefile +++ b/arch/mips/sibyte/swarm/Makefile @@ -1,3 +1,4 @@ obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o +obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/sibyte/swarm/swarm-i2c.c b/arch/mips/sibyte/swarm/swarm-i2c.c new file mode 100644 index 000000000000..4282ac9d01d2 --- /dev/null +++ b/arch/mips/sibyte/swarm/swarm-i2c.c @@ -0,0 +1,37 @@ +/* + * arch/mips/sibyte/swarm/swarm-i2c.c + * + * Broadcom BCM91250A (SWARM), etc. I2C platform setup. + * + * Copyright (c) 2008 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + + +static struct i2c_board_info swarm_i2c_info1[] __initdata = { + { + I2C_BOARD_INFO("m41t81", 0x68), + }, +}; + +static int __init swarm_i2c_init(void) +{ + int err; + + err = i2c_register_board_info(1, swarm_i2c_info1, + ARRAY_SIZE(swarm_i2c_info1)); + if (err < 0) + printk(KERN_ERR + "swarm-i2c: cannot register board I2C devices\n"); + return err; +} + +arch_initcall(swarm_i2c_init); -- cgit v1.2.3 From cb11dfa0247df479e384c4a7ab6846f3a6bf1570 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 9 Jun 2008 16:30:03 -0700 Subject: [MIPS] Remove board_watchpoint_handler It is not used anywhere in tree. Signed-off-by: David Daney Signed-off-by: Andrew Morton Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index f9165d1a17bf..6e7e4a2775f6 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -71,7 +71,6 @@ extern asmlinkage void handle_reserved(void); extern int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, int has_fpu); -void (*board_watchpoint_handler)(struct pt_regs *regs); void (*board_be_init)(void); int (*board_be_handler)(struct pt_regs *regs, int is_fixup); void (*board_nmi_handler_setup)(void); @@ -892,11 +891,6 @@ asmlinkage void do_mdmx(struct pt_regs *regs) asmlinkage void do_watch(struct pt_regs *regs) { - if (board_watchpoint_handler) { - (*board_watchpoint_handler)(regs); - return; - } - /* * We use the watch exception where available to detect stack * overflows. -- cgit v1.2.3 From c88a8b4ab0e1a1f06938939d9ba42e9da6144ccb Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 9 Jun 2008 17:19:53 +0100 Subject: [MIPS] Remove obsolete isa_slot_offset The isa_slot_offset variable and its __ISA_IO_base macro is not used anywhere anymore. It does not look like a decent interface per today's standards either. Remove both including all places of initialization. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- arch/mips/jazz/setup.c | 1 - arch/mips/kernel/setup.c | 7 ------- arch/mips/pci/pci-bcm1480.c | 2 -- arch/mips/pci/pci-sb1250.c | 3 --- arch/mips/sni/setup.c | 1 - 5 files changed, 14 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index a7947199c99b..f136c8a8591c 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -79,7 +79,6 @@ void __init plat_mem_setup(void) if (mips_machtype == MACH_MIPS_MAGNUM_4000) EISA_bus = 1; #endif - isa_slot_offset = 0xe3000000; /* request I/O space for devices used on all i[345]86 PCs */ for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++) diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index c6a063b2a0d9..c04e4e3afede 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -68,13 +68,6 @@ static char command_line[CL_SIZE]; const unsigned long mips_io_port_base __read_mostly = -1; EXPORT_SYMBOL(mips_io_port_base); -/* - * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped - * for the processor. - */ -unsigned long isa_slot_offset; -EXPORT_SYMBOL(isa_slot_offset); - static struct resource code_resource = { .name = "Kernel code", }; static struct resource data_resource = { .name = "Kernel data", }; diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index 87e2c8f54e2d..d19d262157f2 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -254,8 +254,6 @@ static int __init bcm1480_pcibios_init(void) ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536); bcm1480_controller.io_map_base -= bcm1480_controller.io_offset; set_io_port_base(bcm1480_controller.io_map_base); - isa_slot_offset = (unsigned long) - ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024); register_pci_controller(&bcm1480_controller); diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index 2a09ad91ec8c..9bc102a1380e 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -254,9 +254,6 @@ static int __init sb1250_pcibios_init(void) * works correctly with most of Linux's drivers. * XXX ehs: Should this happen in PCI Device mode? */ - isa_slot_offset = (unsigned long) - ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024); - io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024); sb1250_controller.io_map_base = io_map_base; set_io_port_base((unsigned long)io_map_base); diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index 5484e1c62054..a49272ce7ef5 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -116,7 +116,6 @@ void __init plat_mem_setup(void) /* * Setup (E)ISA I/O memory access stuff */ - isa_slot_offset = CKSEG1ADDR(0xb0000000); #ifdef CONFIG_EISA EISA_bus = 1; #endif -- cgit v1.2.3 From 07cdb78436d52416a582e645b9afb6e26f986bc9 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Thu, 29 May 2008 17:57:08 +0300 Subject: [MIPS] fix sparse warning about setup_early_printk() This patch fixes the following sparse warning: <<<<<<<< arch/mips/kernel/early_printk.c:35:13: warning: symbol 'setup_early_printk' was not declared. Should it be static? <<<<<<<< The fix is to define a prototype of the setup_early_printk() function and to include the appropriate header into arch/mips/kernel/early_printk.c. [Ralf: Sorted includes again] Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/kernel/early_printk.c | 2 ++ arch/mips/kernel/setup.c | 6 +----- 2 files changed, 3 insertions(+), 5 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c index 9dccfa4752b2..9ae813eb782e 100644 --- a/arch/mips/kernel/early_printk.c +++ b/arch/mips/kernel/early_printk.c @@ -10,6 +10,8 @@ #include #include +#include + extern void prom_putchar(char); static void __init diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index c04e4e3afede..8af84867e74d 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -550,11 +550,7 @@ void __init setup_arch(char **cmdline_p) prom_init(); #ifdef CONFIG_EARLY_PRINTK - { - extern void setup_early_printk(void); - - setup_early_printk(); - } + setup_early_printk(); #endif cpu_report(); check_bugs_early(); -- cgit v1.2.3 From 17f61e61b4a1d3ca254668cf12c1c5d828d892fd Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Thu, 29 May 2008 17:57:09 +0300 Subject: [MIPS] Make two functions static The following routines uasm_rel_highest() uasm_rel_higher() are needlessly defined global. This patch makes them static. Compile-tested using a customized config for the Malta board. Booting the same board up to the shell prompt was also successful with this patch applied. Spotted by sparse. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/mm/uasm.c | 4 ++-- arch/mips/mm/uasm.h | 2 -- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c index 1655aa69e133..f467199676a8 100644 --- a/arch/mips/mm/uasm.c +++ b/arch/mips/mm/uasm.c @@ -396,7 +396,7 @@ int __cpuinit uasm_in_compat_space_p(long addr) #endif } -int __cpuinit uasm_rel_highest(long val) +static int __cpuinit uasm_rel_highest(long val) { #ifdef CONFIG_64BIT return ((((val + 0x800080008000L) >> 48) & 0xffff) ^ 0x8000) - 0x8000; @@ -405,7 +405,7 @@ int __cpuinit uasm_rel_highest(long val) #endif } -int __cpuinit uasm_rel_higher(long val) +static int __cpuinit uasm_rel_higher(long val) { #ifdef CONFIG_64BIT return ((((val + 0x80008000L) >> 32) & 0xffff) ^ 0x8000) - 0x8000; diff --git a/arch/mips/mm/uasm.h b/arch/mips/mm/uasm.h index 0d6a66f32030..c6d1e3dd82d4 100644 --- a/arch/mips/mm/uasm.h +++ b/arch/mips/mm/uasm.h @@ -103,8 +103,6 @@ struct uasm_label { void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid); #ifdef CONFIG_64BIT int uasm_in_compat_space_p(long addr); -int uasm_rel_highest(long val); -int uasm_rel_higher(long val); #endif int uasm_rel_hi(long val); int uasm_rel_lo(long val); -- cgit v1.2.3 From f366e2085f28358a5294b8cdc847a377c02eb22d Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Thu, 29 May 2008 17:57:11 +0300 Subject: [MIPS] unexport {allocate,free}_irqno The following routines allocate_irqno() free_irqno() seem not to be used outside of the core kernel code, hence exporting these functions is pointless. This patch removes the export. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/kernel/irq.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index e3309ff9ece4..6045b9a51a35 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -44,8 +44,6 @@ again: return irq; } -EXPORT_SYMBOL_GPL(allocate_irqno); - /* * Allocate the 16 legacy interrupts for i8259 devices. This happens early * in the kernel initialization so treating allocation failure as BUG() is @@ -66,8 +64,6 @@ void free_irqno(unsigned int irq) smp_mb__after_clear_bit(); } -EXPORT_SYMBOL_GPL(free_irqno); - /* * 'what should we do if we get a hw irq event on an illegal vector'. * each architecture has to answer this themselves. -- cgit v1.2.3 From 4b62220b608ab71876d8920d5590f1db4ee2eb4a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:29 +0100 Subject: [MIPS] Alchemy, PNX: Use symbolic constants for DMA masks. Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/platform.c | 29 +++++++++++++++-------------- arch/mips/au1000/pb1200/platform.c | 5 +++-- arch/mips/nxp/pnx8550/common/platform.c | 9 +++++---- 3 files changed, 23 insertions(+), 20 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 74d6d4a593be..dc8a67efac28 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -11,6 +11,7 @@ * warranty of any kind, whether express or implied. */ +#include #include #include #include @@ -77,14 +78,14 @@ static struct resource au1xxx_usb_ohci_resources[] = { }; /* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32)0; +static u64 ohci_dmamask = DMA_32BIT_MASK; static struct platform_device au1xxx_usb_ohci_device = { .name = "au1xxx-ohci", .id = 0, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1xxx_usb_ohci_resources), .resource = au1xxx_usb_ohci_resources, @@ -106,14 +107,14 @@ static struct resource au1100_lcd_resources[] = { } }; -static u64 au1100_lcd_dmamask = ~(u32)0; +static u64 au1100_lcd_dmamask = DMA_32BIT_MASK; static struct platform_device au1100_lcd_device = { .name = "au1100-lcd", .id = 0, .dev = { .dma_mask = &au1100_lcd_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1100_lcd_resources), .resource = au1100_lcd_resources, @@ -135,14 +136,14 @@ static struct resource au1xxx_usb_ehci_resources[] = { }, }; -static u64 ehci_dmamask = ~(u32)0; +static u64 ehci_dmamask = DMA_32BIT_MASK; static struct platform_device au1xxx_usb_ehci_device = { .name = "au1xxx-ehci", .id = 0, .dev = { .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1xxx_usb_ehci_resources), .resource = au1xxx_usb_ehci_resources, @@ -180,14 +181,14 @@ static struct resource au1xxx_mmc_resources[] = { } }; -static u64 udc_dmamask = ~(u32)0; +static u64 udc_dmamask = DMA_32BIT_MASK; static struct platform_device au1xxx_usb_gdt_device = { .name = "au1xxx-udc", .id = 0, .dev = { .dma_mask = &udc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1xxx_usb_gdt_resources), .resource = au1xxx_usb_gdt_resources, @@ -207,14 +208,14 @@ static struct resource au1xxx_usb_otg_resources[] = { }, }; -static u64 uoc_dmamask = ~(u32)0; +static u64 uoc_dmamask = DMA_32BIT_MASK; static struct platform_device au1xxx_usb_otg_device = { .name = "au1xxx-uoc", .id = 0, .dev = { .dma_mask = &uoc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1xxx_usb_otg_resources), .resource = au1xxx_usb_otg_resources, @@ -233,27 +234,27 @@ static struct resource au1200_lcd_resources[] = { } }; -static u64 au1200_lcd_dmamask = ~(u32)0; +static u64 au1200_lcd_dmamask = DMA_32BIT_MASK; static struct platform_device au1200_lcd_device = { .name = "au1200-lcd", .id = 0, .dev = { .dma_mask = &au1200_lcd_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1200_lcd_resources), .resource = au1200_lcd_resources, }; -static u64 au1xxx_mmc_dmamask = ~(u32)0; +static u64 au1xxx_mmc_dmamask = DMA_32BIT_MASK; static struct platform_device au1xxx_mmc_device = { .name = "au1xxx-mmc", .id = 0, .dev = { .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1xxx_mmc_resources), .resource = au1xxx_mmc_resources, diff --git a/arch/mips/au1000/pb1200/platform.c b/arch/mips/au1000/pb1200/platform.c index 5930110b9b6d..f8fb0aeac571 100644 --- a/arch/mips/au1000/pb1200/platform.c +++ b/arch/mips/au1000/pb1200/platform.c @@ -18,6 +18,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #include #include @@ -36,14 +37,14 @@ static struct resource ide_resources[] = { } }; -static u64 ide_dmamask = ~(u32)0; +static u64 ide_dmamask = DMA_32BIT_MASK; static struct platform_device ide_device = { .name = "au1200-ide", .id = 0, .dev = { .dma_mask = &ide_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(ide_resources), .resource = ide_resources diff --git a/arch/mips/nxp/pnx8550/common/platform.c b/arch/mips/nxp/pnx8550/common/platform.c index c7c763dbe588..21d2955359b3 100644 --- a/arch/mips/nxp/pnx8550/common/platform.c +++ b/arch/mips/nxp/pnx8550/common/platform.c @@ -13,6 +13,7 @@ * warranty of any kind, whether express or implied. */ #include +#include #include #include #include @@ -91,16 +92,16 @@ struct pnx8xxx_port pnx8xxx_ports[] = { }; /* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32)0; +static u64 ohci_dmamask = DMA_32BIT_MASK; -static u64 uart_dmamask = ~(u32)0; +static u64 uart_dmamask = DMA_32BIT_MASK; static struct platform_device pnx8550_usb_ohci_device = { .name = "pnx8550-ohci", .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(pnx8550_usb_ohci_resources), .resource = pnx8550_usb_ohci_resources, @@ -111,7 +112,7 @@ static struct platform_device pnx8550_uart_device = { .id = -1, .dev = { .dma_mask = &uart_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, .platform_data = pnx8xxx_ports, }, .num_resources = ARRAY_SIZE(pnx8550_uart_resources), -- cgit v1.2.3 From 2957c9e61ee9c37e7ebf2c8acab03e073fe942fd Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:30 +0100 Subject: [MIPS] IRIX: Goodbye and thanks for all the fish Never terribly functional or popular, plagued by hard to fix bugs the time to say goodbye has more than arrived. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 4 - arch/mips/kernel/Makefile | 4 - arch/mips/kernel/irix5sys.S | 1041 ------------------- arch/mips/kernel/irixelf.c | 1361 ------------------------- arch/mips/kernel/irixinv.c | 78 -- arch/mips/kernel/irixioctl.c | 213 ---- arch/mips/kernel/irixsig.c | 888 ----------------- arch/mips/kernel/process.c | 7 - arch/mips/kernel/scall32-o32.S | 19 - arch/mips/kernel/sysirix.c | 2140 ---------------------------------------- 10 files changed, 5755 deletions(-) delete mode 100644 arch/mips/kernel/irix5sys.S delete mode 100644 arch/mips/kernel/irixelf.c delete mode 100644 arch/mips/kernel/irixinv.c delete mode 100644 arch/mips/kernel/irixioctl.c delete mode 100644 arch/mips/kernel/irixsig.c delete mode 100644 arch/mips/kernel/sysirix.c (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 24c5dee91768..21d6ec1e5368 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2064,10 +2064,6 @@ source "fs/Kconfig.binfmt" config TRAD_SIGNALS bool -config BINFMT_IRIX - bool "Include IRIX binary compatibility" - depends on CPU_BIG_ENDIAN && 32BIT && BROKEN - config MIPS32_COMPAT bool "Kernel support for Linux/MIPS 32-bit binary compatibility" depends on 64BIT diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 65e46a6d4178..48ae915b38e0 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -20,9 +20,6 @@ obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o obj-$(CONFIG_SYNC_R4K) += sync-r4k.o -binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \ - irix5sys.o sysirix.o - obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_MODULES) += mips_ksyms.o module.o @@ -70,7 +67,6 @@ obj-$(CONFIG_IRQ_GIC) += irq-gic.o obj-$(CONFIG_32BIT) += scall32-o32.o obj-$(CONFIG_64BIT) += scall64-64.o -obj-$(CONFIG_BINFMT_IRIX) += binfmt_irix.o obj-$(CONFIG_MIPS32_COMPAT) += linux32.o ptrace32.o signal32.o obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o diff --git a/arch/mips/kernel/irix5sys.S b/arch/mips/kernel/irix5sys.S deleted file mode 100644 index eeef891093ed..000000000000 --- a/arch/mips/kernel/irix5sys.S +++ /dev/null @@ -1,1041 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * 32-bit IRIX5 ABI system call table derived from original file 'irix5sys.h' - * created by David S. Miller. - * - * Copyright (C) 1996 - 2004 David S. Miller - * Copyright (C) 2004 Steven J. Hill - */ -#include - - /* - * Key: - * V == Valid and should work as expected for most cases. - * HV == Half Valid, some things will work, some likely will not - * IV == InValid, certainly will not work at all yet - * ?V == ?'ably Valid, I have not done enough looking into it - * DC == Don't Care, a rats ass we couldn't give - */ - - .macro irix5syscalltable - - sys sys_syscall 0 /* 1000 sysindir() V*/ - sys sys_exit 1 /* 1001 exit() V*/ - sys sys_fork 0 /* 1002 fork() V*/ - sys sys_read 3 /* 1003 read() V*/ - sys sys_write 3 /* 1004 write() V*/ - sys sys_open 3 /* 1005 open() V*/ - sys sys_close 1 /* 1006 close() V*/ - sys irix_unimp 0 /* 1007 (XXX IRIX 4 wait) V*/ - sys sys_creat 2 /* 1008 creat() V*/ - sys sys_link 2 /* 1009 link() V*/ - sys sys_unlink 1 /* 1010 unlink() V*/ - sys irix_exec 0 /* 1011 exec() V*/ - sys sys_chdir 1 /* 1012 chdir() V*/ - sys irix_gtime 0 /* 1013 time() V*/ - sys irix_unimp 0 /* 1014 (XXX IRIX 4 mknod) V*/ - sys sys_chmod 2 /* 1015 chmod() V*/ - sys sys_chown 3 /* 1016 chown() V*/ - sys irix_brk 1 /* 1017 break() V*/ - sys irix_unimp 0 /* 1018 (XXX IRIX 4 stat) V*/ - sys sys_lseek 3 /* 1019 lseek() XXX64bit HV*/ - sys irix_getpid 0 /* 1020 getpid() V*/ - sys irix_mount 6 /* 1021 mount() IV*/ - sys sys_umount 1 /* 1022 umount() V*/ - sys sys_setuid 1 /* 1023 setuid() V*/ - sys irix_getuid 0 /* 1024 getuid() V*/ - sys irix_stime 1 /* 1025 stime() V*/ - sys irix_unimp 4 /* 1026 XXX ptrace() IV*/ - sys irix_alarm 1 /* 1027 alarm() V*/ - sys irix_unimp 0 /* 1028 (XXX IRIX 4 fstat) V*/ - sys irix_pause 0 /* 1029 pause() V*/ - sys sys_utime 2 /* 1030 utime() V*/ - sys irix_unimp 0 /* 1031 nuthin' V*/ - sys irix_unimp 0 /* 1032 nobody home man... V*/ - sys sys_access 2 /* 1033 access() V*/ - sys sys_nice 1 /* 1034 nice() V*/ - sys irix_statfs 2 /* 1035 statfs() V*/ - sys sys_sync 0 /* 1036 sync() V*/ - sys sys_kill 2 /* 1037 kill() V*/ - sys irix_fstatfs 2 /* 1038 fstatfs() V*/ - sys irix_setpgrp 1 /* 1039 setpgrp() V*/ - sys irix_syssgi 0 /* 1040 syssgi() HV*/ - sys sys_dup 1 /* 1041 dup() V*/ - sys sys_pipe 0 /* 1042 pipe() V*/ - sys irix_times 1 /* 1043 times() V*/ - sys irix_unimp 0 /* 1044 XXX profil() IV*/ - sys irix_unimp 0 /* 1045 XXX lock() IV*/ - sys sys_setgid 1 /* 1046 setgid() V*/ - sys irix_getgid 0 /* 1047 getgid() V*/ - sys irix_unimp 0 /* 1048 (XXX IRIX 4 ssig) V*/ - sys irix_msgsys 6 /* 1049 sys_msgsys V*/ - sys sys_sysmips 4 /* 1050 sysmips() HV*/ - sys irix_unimp 0 /* 1051 XXX sysacct() IV*/ - sys irix_shmsys 5 /* 1052 sys_shmsys V*/ - sys irix_semsys 0 /* 1053 sys_semsys V*/ - sys irix_ioctl 3 /* 1054 ioctl() HV*/ - sys irix_uadmin 0 /* 1055 XXX sys_uadmin() HC*/ - sys irix_sysmp 0 /* 1056 sysmp() HV*/ - sys irix_utssys 4 /* 1057 sys_utssys() HV*/ - sys irix_unimp 0 /* 1058 nada enchilada V*/ - sys irix_exece 0 /* 1059 exece() V*/ - sys sys_umask 1 /* 1060 umask() V*/ - sys sys_chroot 1 /* 1061 chroot() V*/ - sys irix_fcntl 3 /* 1062 fcntl() ?V*/ - sys irix_ulimit 2 /* 1063 ulimit() HV*/ - sys irix_unimp 0 /* 1064 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1065 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1066 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1067 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1068 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1069 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1070 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1071 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1072 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1073 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1074 nuttin' V*/ - sys irix_unimp 0 /* 1075 XXX sys_getrlimit64()IV*/ - sys irix_unimp 0 /* 1076 XXX sys_setrlimit64()IV*/ - sys sys_nanosleep 2 /* 1077 nanosleep() V*/ - sys irix_lseek64 5 /* 1078 lseek64() ?V*/ - sys sys_rmdir 1 /* 1079 rmdir() V*/ - sys sys_mkdir 2 /* 1080 mkdir() V*/ - sys sys_getdents 3 /* 1081 getdents() V*/ - sys irix_sginap 1 /* 1082 sys_sginap() V*/ - sys irix_sgikopt 3 /* 1083 sys_sgikopt() DC*/ - sys sys_sysfs 3 /* 1084 sysfs() ?V*/ - sys irix_unimp 0 /* 1085 XXX sys_getmsg() DC*/ - sys irix_unimp 0 /* 1086 XXX sys_putmsg() DC*/ - sys sys_poll 3 /* 1087 poll() V*/ - sys irix_sigreturn 0 /* 1088 sigreturn() ?V*/ - sys sys_accept 3 /* 1089 accept() V*/ - sys sys_bind 3 /* 1090 bind() V*/ - sys sys_connect 3 /* 1091 connect() V*/ - sys irix_gethostid 0 /* 1092 sys_gethostid() ?V*/ - sys sys_getpeername 3 /* 1093 getpeername() V*/ - sys sys_getsockname 3 /* 1094 getsockname() V*/ - sys sys_getsockopt 5 /* 1095 getsockopt() V*/ - sys sys_listen 2 /* 1096 listen() V*/ - sys sys_recv 4 /* 1097 recv() V*/ - sys sys_recvfrom 6 /* 1098 recvfrom() V*/ - sys sys_recvmsg 3 /* 1099 recvmsg() V*/ - sys sys_select 5 /* 1100 select() V*/ - sys sys_send 4 /* 1101 send() V*/ - sys sys_sendmsg 3 /* 1102 sendmsg() V*/ - sys sys_sendto 6 /* 1103 sendto() V*/ - sys irix_sethostid 1 /* 1104 sys_sethostid() ?V*/ - sys sys_setsockopt 5 /* 1105 setsockopt() V*/ - sys sys_shutdown 2 /* 1106 shutdown() ?V*/ - sys irix_socket 3 /* 1107 socket() V*/ - sys sys_gethostname 2 /* 1108 sys_gethostname() ?V*/ - sys sys_sethostname 2 /* 1109 sethostname() ?V*/ - sys irix_getdomainname 2 /* 1110 sys_getdomainname() ?V*/ - sys sys_setdomainname 2 /* 1111 setdomainname() ?V*/ - sys sys_truncate 2 /* 1112 truncate() V*/ - sys sys_ftruncate 2 /* 1113 ftruncate() V*/ - sys sys_rename 2 /* 1114 rename() V*/ - sys sys_symlink 2 /* 1115 symlink() V*/ - sys sys_readlink 3 /* 1116 readlink() V*/ - sys irix_unimp 0 /* 1117 XXX IRIX 4 lstat() DC*/ - sys irix_unimp 0 /* 1118 nothin' V*/ - sys irix_unimp 0 /* 1119 XXX nfs_svc() DC*/ - sys irix_unimp 0 /* 1120 XXX nfs_getfh() DC*/ - sys irix_unimp 0 /* 1121 XXX async_daemon() DC*/ - sys irix_unimp 0 /* 1122 XXX exportfs() DC*/ - sys sys_setregid 2 /* 1123 setregid() V*/ - sys sys_setreuid 2 /* 1124 setreuid() V*/ - sys sys_getitimer 2 /* 1125 getitimer() V*/ - sys sys_setitimer 3 /* 1126 setitimer() V*/ - sys irix_unimp 1 /* 1127 XXX adjtime() IV*/ - sys irix_gettimeofday 1 /* 1128 gettimeofday() V*/ - sys irix_unimp 0 /* 1129 XXX sproc() IV*/ - sys irix_prctl 0 /* 1130 prctl() HV*/ - sys irix_unimp 0 /* 1131 XXX procblk() IV*/ - sys irix_unimp 0 /* 1132 XXX sprocsp() IV*/ - sys irix_unimp 0 /* 1133 XXX sgigsc() IV*/ - sys irix_mmap32 6 /* 1134 mmap() XXXflags? ?V*/ - sys sys_munmap 2 /* 1135 munmap() V*/ - sys sys_mprotect 3 /* 1136 mprotect() V*/ - sys sys_msync 4 /* 1137 msync() V*/ - sys irix_madvise 3 /* 1138 madvise() DC*/ - sys irix_pagelock 3 /* 1139 pagelock() IV*/ - sys irix_getpagesize 0 /* 1140 getpagesize() V*/ - sys irix_quotactl 0 /* 1141 quotactl() V*/ - sys irix_unimp 0 /* 1142 nobody home man V*/ - sys sys_getpgid 1 /* 1143 BSD getpgrp() V*/ - sys irix_BSDsetpgrp 2 /* 1143 BSD setpgrp() V*/ - sys sys_vhangup 0 /* 1144 vhangup() V*/ - sys sys_fsync 1 /* 1145 fsync() V*/ - sys sys_fchdir 1 /* 1146 fchdir() V*/ - sys sys_getrlimit 2 /* 1147 getrlimit() ?V*/ - sys sys_setrlimit 2 /* 1148 setrlimit() ?V*/ - sys sys_cacheflush 3 /* 1150 cacheflush() HV*/ - sys sys_cachectl 3 /* 1151 cachectl() HV*/ - sys sys_fchown 3 /* 1152 fchown() ?V*/ - sys sys_fchmod 2 /* 1153 fchmod() ?V*/ - sys irix_unimp 0 /* 1154 XXX IRIX 4 wait3() V*/ - sys sys_socketpair 4 /* 1155 socketpair() V*/ - sys irix_systeminfo 3 /* 1156 systeminfo() IV*/ - sys irix_uname 1 /* 1157 uname() IV*/ - sys irix_xstat 3 /* 1158 xstat() V*/ - sys irix_lxstat 3 /* 1159 lxstat() V*/ - sys irix_fxstat 3 /* 1160 fxstat() V*/ - sys irix_xmknod 0 /* 1161 xmknod() ?V*/ - sys irix_sigaction 4 /* 1162 sigaction() ?V*/ - sys irix_sigpending 1 /* 1163 sigpending() ?V*/ - sys irix_sigprocmask 3 /* 1164 sigprocmask() ?V*/ - sys irix_sigsuspend 0 /* 1165 sigsuspend() ?V*/ - sys irix_sigpoll_sys 3 /* 1166 sigpoll_sys() IV*/ - sys irix_swapctl 2 /* 1167 swapctl() IV*/ - sys irix_getcontext 0 /* 1168 getcontext() HV*/ - sys irix_setcontext 0 /* 1169 setcontext() HV*/ - sys irix_waitsys 5 /* 1170 waitsys() IV*/ - sys irix_sigstack 2 /* 1171 sigstack() HV*/ - sys irix_sigaltstack 2 /* 1172 sigaltstack() HV*/ - sys irix_sigsendset 2 /* 1173 sigsendset() IV*/ - sys irix_statvfs 2 /* 1174 statvfs() V*/ - sys irix_fstatvfs 2 /* 1175 fstatvfs() V*/ - sys irix_unimp 0 /* 1176 XXX getpmsg() DC*/ - sys irix_unimp 0 /* 1177 XXX putpmsg() DC*/ - sys sys_lchown 3 /* 1178 lchown() V*/ - sys irix_priocntl 0 /* 1179 priocntl() DC*/ - sys irix_sigqueue 4 /* 1180 sigqueue() IV*/ - sys sys_readv 3 /* 1181 readv() V*/ - sys sys_writev 3 /* 1182 writev() V*/ - sys irix_truncate64 4 /* 1183 truncate64() XX32bit HV*/ - sys irix_ftruncate64 4 /* 1184 ftruncate64()XX32bit HV*/ - sys irix_mmap64 0 /* 1185 mmap64() XX32bit HV*/ - sys irix_dmi 0 /* 1186 dmi() DC*/ - sys irix_pread 6 /* 1187 pread() IV*/ - sys irix_pwrite 6 /* 1188 pwrite() IV*/ - sys sys_fsync 1 /* 1189 fdatasync() XXPOSIX HV*/ - sys irix_sgifastpath 7 /* 1190 sgifastpath() WHEEE IV*/ - sys irix_unimp 0 /* 1191 XXX attr_get() DC*/ - sys irix_unimp 0 /* 1192 XXX attr_getf() DC*/ - sys irix_unimp 0 /* 1193 XXX attr_set() DC*/ - sys irix_unimp 0 /* 1194 XXX attr_setf() DC*/ - sys irix_unimp 0 /* 1195 XXX attr_remove() DC*/ - sys irix_unimp 0 /* 1196 XXX attr_removef() DC*/ - sys irix_unimp 0 /* 1197 XXX attr_list() DC*/ - sys irix_unimp 0 /* 1198 XXX attr_listf() DC*/ - sys irix_unimp 0 /* 1199 XXX attr_multi() DC*/ - sys irix_unimp 0 /* 1200 XXX attr_multif() DC*/ - sys irix_statvfs64 2 /* 1201 statvfs64() V*/ - sys irix_fstatvfs64 2 /* 1202 fstatvfs64() V*/ - sys irix_getmountid 2 /* 1203 getmountid()XXXfsids HV*/ - sys irix_nsproc 5 /* 1204 nsproc() IV*/ - sys irix_getdents64 3 /* 1205 getdents64() HV*/ - sys irix_unimp 0 /* 1206 XXX DFS garbage DC*/ - sys irix_ngetdents 4 /* 1207 ngetdents() XXXeop HV*/ - sys irix_ngetdents64 4 /* 1208 ngetdents64() XXXeop HV*/ - sys irix_unimp 0 /* 1209 nothin' V*/ - sys irix_unimp 0 /* 1210 XXX pidsprocsp() */ - sys irix_unimp 0 /* 1211 XXX rexec() */ - sys irix_unimp 0 /* 1212 XXX timer_create() */ - sys irix_unimp 0 /* 1213 XXX timer_delete() */ - sys irix_unimp 0 /* 1214 XXX timer_settime() */ - sys irix_unimp 0 /* 1215 XXX timer_gettime() */ - sys irix_unimp 0 /* 1216 XXX timer_setoverrun() */ - sys sys_sched_rr_get_interval 2 /* 1217 sched_rr_get_interval()V*/ - sys sys_sched_yield 0 /* 1218 sched_yield() V*/ - sys sys_sched_getscheduler 1 /* 1219 sched_getscheduler() V*/ - sys sys_sched_setscheduler 3 /* 1220 sched_setscheduler() V*/ - sys sys_sched_getparam 2 /* 1221 sched_getparam() V*/ - sys sys_sched_setparam 2 /* 1222 sched_setparam() V*/ - sys irix_unimp 0 /* 1223 XXX usync_cntl() */ - sys irix_unimp 0 /* 1224 XXX psema_cntl() */ - sys irix_unimp 0 /* 1225 XXX restartreturn() */ - - /* Just to pad things out nicely. */ - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - - .endm - - /* - * Pre-compute the number of _instruction_ bytes needed to load - * or store the arguments 6-8. Negative values are ignored. - */ - .macro sys function, nargs - PTR \function - LONG (\nargs << 2) - (5 << 2) - .endm - - .align 4 -EXPORT(sys_call_table_irix5) - irix5syscalltable diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c deleted file mode 100644 index 469c7237e5ba..000000000000 --- a/arch/mips/kernel/irixelf.c +++ /dev/null @@ -1,1361 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * irixelf.c: Code to load IRIX ELF executables conforming to the MIPS ABI. - * Based off of work by Eric Youngdale. - * - * Copyright (C) 1993 - 1994 Eric Youngdale - * Copyright (C) 1996 - 2004 David S. Miller - * Copyright (C) 2004 - 2005 Steven J. Hill - */ -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define DLINFO_ITEMS 12 - -#include - -static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs); -static int load_irix_library(struct file *); -static int irix_core_dump(long signr, struct pt_regs * regs, - struct file *file, unsigned long limit); - -static struct linux_binfmt irix_format = { - .module = THIS_MODULE, - .load_binary = load_irix_binary, - .load_shlib = load_irix_library, - .core_dump = irix_core_dump, - .min_coredump = PAGE_SIZE, -}; - -/* Debugging routines. */ -static char *get_elf_p_type(Elf32_Word p_type) -{ -#ifdef DEBUG - switch (p_type) { - case PT_NULL: - return "PT_NULL"; - break; - - case PT_LOAD: - return "PT_LOAD"; - break; - - case PT_DYNAMIC: - return "PT_DYNAMIC"; - break; - - case PT_INTERP: - return "PT_INTERP"; - break; - - case PT_NOTE: - return "PT_NOTE"; - break; - - case PT_SHLIB: - return "PT_SHLIB"; - break; - - case PT_PHDR: - return "PT_PHDR"; - break; - - case PT_LOPROC: - return "PT_LOPROC/REGINFO"; - break; - - case PT_HIPROC: - return "PT_HIPROC"; - break; - - default: - return "PT_BOGUS"; - break; - } -#endif -} - -static void print_elfhdr(struct elfhdr *ehp) -{ - int i; - - pr_debug("ELFHDR: e_ident<"); - for (i = 0; i < (EI_NIDENT - 1); i++) - pr_debug("%x ", ehp->e_ident[i]); - pr_debug("%x>\n", ehp->e_ident[i]); - pr_debug(" e_type[%04x] e_machine[%04x] e_version[%08lx]\n", - (unsigned short) ehp->e_type, (unsigned short) ehp->e_machine, - (unsigned long) ehp->e_version); - pr_debug(" e_entry[%08lx] e_phoff[%08lx] e_shoff[%08lx] " - "e_flags[%08lx]\n", - (unsigned long) ehp->e_entry, (unsigned long) ehp->e_phoff, - (unsigned long) ehp->e_shoff, (unsigned long) ehp->e_flags); - pr_debug(" e_ehsize[%04x] e_phentsize[%04x] e_phnum[%04x]\n", - (unsigned short) ehp->e_ehsize, - (unsigned short) ehp->e_phentsize, - (unsigned short) ehp->e_phnum); - pr_debug(" e_shentsize[%04x] e_shnum[%04x] e_shstrndx[%04x]\n", - (unsigned short) ehp->e_shentsize, - (unsigned short) ehp->e_shnum, - (unsigned short) ehp->e_shstrndx); -} - -static void print_phdr(int i, struct elf_phdr *ep) -{ - pr_debug("PHDR[%d]: p_type[%s] p_offset[%08lx] p_vaddr[%08lx] " - "p_paddr[%08lx]\n", i, get_elf_p_type(ep->p_type), - (unsigned long) ep->p_offset, (unsigned long) ep->p_vaddr, - (unsigned long) ep->p_paddr); - pr_debug(" p_filesz[%08lx] p_memsz[%08lx] p_flags[%08lx] " - "p_align[%08lx]\n", (unsigned long) ep->p_filesz, - (unsigned long) ep->p_memsz, (unsigned long) ep->p_flags, - (unsigned long) ep->p_align); -} - -static void dump_phdrs(struct elf_phdr *ep, int pnum) -{ - int i; - - for (i = 0; i < pnum; i++, ep++) { - if ((ep->p_type == PT_LOAD) || - (ep->p_type == PT_INTERP) || - (ep->p_type == PT_PHDR)) - print_phdr(i, ep); - } -} - -static void set_brk(unsigned long start, unsigned long end) -{ - start = PAGE_ALIGN(start); - end = PAGE_ALIGN(end); - if (end <= start) - return; - down_write(¤t->mm->mmap_sem); - do_brk(start, end - start); - up_write(¤t->mm->mmap_sem); -} - - -/* We need to explicitly zero any fractional pages - * after the data section (i.e. bss). This would - * contain the junk from the file that should not - * be in memory. - */ -static void padzero(unsigned long elf_bss) -{ - unsigned long nbyte; - - nbyte = elf_bss & (PAGE_SIZE-1); - if (nbyte) { - nbyte = PAGE_SIZE - nbyte; - clear_user((void __user *) elf_bss, nbyte); - } -} - -static unsigned long * create_irix_tables(char * p, int argc, int envc, - struct elfhdr * exec, unsigned int load_addr, - unsigned int interp_load_addr, struct pt_regs *regs, - struct elf_phdr *ephdr) -{ - elf_addr_t *argv; - elf_addr_t *envp; - elf_addr_t *sp, *csp; - - pr_debug("create_irix_tables: p[%p] argc[%d] envc[%d] " - "load_addr[%08x] interp_load_addr[%08x]\n", - p, argc, envc, load_addr, interp_load_addr); - - sp = (elf_addr_t *) (~15UL & (unsigned long) p); - csp = sp; - csp -= exec ? DLINFO_ITEMS*2 : 2; - csp -= envc+1; - csp -= argc+1; - csp -= 1; /* argc itself */ - if ((unsigned long)csp & 15UL) { - sp -= (16UL - ((unsigned long)csp & 15UL)) / sizeof(*sp); - } - - /* - * Put the ELF interpreter info on the stack - */ -#define NEW_AUX_ENT(nr, id, val) \ - __put_user((id), sp+(nr*2)); \ - __put_user((val), sp+(nr*2+1)); \ - - sp -= 2; - NEW_AUX_ENT(0, AT_NULL, 0); - - if (exec) { - sp -= 11*2; - - NEW_AUX_ENT(0, AT_PHDR, load_addr + exec->e_phoff); - NEW_AUX_ENT(1, AT_PHENT, sizeof(struct elf_phdr)); - NEW_AUX_ENT(2, AT_PHNUM, exec->e_phnum); - NEW_AUX_ENT(3, AT_PAGESZ, ELF_EXEC_PAGESIZE); - NEW_AUX_ENT(4, AT_BASE, interp_load_addr); - NEW_AUX_ENT(5, AT_FLAGS, 0); - NEW_AUX_ENT(6, AT_ENTRY, (elf_addr_t) exec->e_entry); - NEW_AUX_ENT(7, AT_UID, (elf_addr_t) current->uid); - NEW_AUX_ENT(8, AT_EUID, (elf_addr_t) current->euid); - NEW_AUX_ENT(9, AT_GID, (elf_addr_t) current->gid); - NEW_AUX_ENT(10, AT_EGID, (elf_addr_t) current->egid); - } -#undef NEW_AUX_ENT - - sp -= envc+1; - envp = sp; - sp -= argc+1; - argv = sp; - - __put_user((elf_addr_t)argc, --sp); - current->mm->arg_start = (unsigned long) p; - while (argc-->0) { - __put_user((unsigned long)p, argv++); - p += strlen_user(p); - } - __put_user((unsigned long) NULL, argv); - current->mm->arg_end = current->mm->env_start = (unsigned long) p; - while (envc-->0) { - __put_user((unsigned long)p, envp++); - p += strlen_user(p); - } - __put_user((unsigned long) NULL, envp); - current->mm->env_end = (unsigned long) p; - return sp; -} - - -/* This is much more generalized than the library routine read function, - * so we keep this separate. Technically the library read function - * is only provided so that we can read a.out libraries that have - * an ELF header. - */ -static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex, - struct file * interpreter, - unsigned int *interp_load_addr) -{ - struct elf_phdr *elf_phdata = NULL; - struct elf_phdr *eppnt; - unsigned int len; - unsigned int load_addr; - int elf_bss; - int retval; - unsigned int last_bss; - int error; - int i; - unsigned int k; - - elf_bss = 0; - last_bss = 0; - error = load_addr = 0; - - print_elfhdr(interp_elf_ex); - - /* First of all, some simple consistency checks */ - if ((interp_elf_ex->e_type != ET_EXEC && - interp_elf_ex->e_type != ET_DYN) || - !interpreter->f_op->mmap) { - printk("IRIX interp has bad e_type %d\n", interp_elf_ex->e_type); - return 0xffffffff; - } - - /* Now read in all of the header information */ - if (sizeof(struct elf_phdr) * interp_elf_ex->e_phnum > PAGE_SIZE) { - printk("IRIX interp header bigger than a page (%d)\n", - (sizeof(struct elf_phdr) * interp_elf_ex->e_phnum)); - return 0xffffffff; - } - - elf_phdata = kmalloc(sizeof(struct elf_phdr) * interp_elf_ex->e_phnum, - GFP_KERNEL); - - if (!elf_phdata) { - printk("Cannot kmalloc phdata for IRIX interp.\n"); - return 0xffffffff; - } - - /* If the size of this structure has changed, then punt, since - * we will be doing the wrong thing. - */ - if (interp_elf_ex->e_phentsize != 32) { - printk("IRIX interp e_phentsize == %d != 32 ", - interp_elf_ex->e_phentsize); - kfree(elf_phdata); - return 0xffffffff; - } - - retval = kernel_read(interpreter, interp_elf_ex->e_phoff, - (char *) elf_phdata, - sizeof(struct elf_phdr) * interp_elf_ex->e_phnum); - - dump_phdrs(elf_phdata, interp_elf_ex->e_phnum); - - eppnt = elf_phdata; - for (i = 0; i < interp_elf_ex->e_phnum; i++, eppnt++) { - if (eppnt->p_type == PT_LOAD) { - int elf_type = MAP_PRIVATE | MAP_DENYWRITE; - int elf_prot = 0; - unsigned long vaddr = 0; - if (eppnt->p_flags & PF_R) - elf_prot = PROT_READ; - if (eppnt->p_flags & PF_W) - elf_prot |= PROT_WRITE; - if (eppnt->p_flags & PF_X) - elf_prot |= PROT_EXEC; - elf_type |= MAP_FIXED; - vaddr = eppnt->p_vaddr; - - pr_debug("INTERP do_mmap" - "(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ", - interpreter, vaddr, - (unsigned long) - (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)), - (unsigned long) - elf_prot, (unsigned long) elf_type, - (unsigned long) - (eppnt->p_offset & 0xfffff000)); - - down_write(¤t->mm->mmap_sem); - error = do_mmap(interpreter, vaddr, - eppnt->p_filesz + (eppnt->p_vaddr & 0xfff), - elf_prot, elf_type, - eppnt->p_offset & 0xfffff000); - up_write(¤t->mm->mmap_sem); - - if (error < 0 && error > -1024) { - printk("Aieee IRIX interp mmap error=%d\n", - error); - break; /* Real error */ - } - pr_debug("error=%08lx ", (unsigned long) error); - if (!load_addr && interp_elf_ex->e_type == ET_DYN) { - load_addr = error; - pr_debug("load_addr = error "); - } - - /* - * Find the end of the file mapping for this phdr, and - * keep track of the largest address we see for this. - */ - k = eppnt->p_vaddr + eppnt->p_filesz; - if (k > elf_bss) - elf_bss = k; - - /* Do the same thing for the memory mapping - between - * elf_bss and last_bss is the bss section. - */ - k = eppnt->p_memsz + eppnt->p_vaddr; - if (k > last_bss) - last_bss = k; - pr_debug("\n"); - } - } - - /* Now use mmap to map the library into memory. */ - if (error < 0 && error > -1024) { - pr_debug("got error %d\n", error); - kfree(elf_phdata); - return 0xffffffff; - } - - /* Now fill out the bss section. First pad the last page up - * to the page boundary, and then perform a mmap to make sure - * that there are zero-mapped pages up to and including the - * last bss page. - */ - pr_debug("padzero(%08lx) ", (unsigned long) (elf_bss)); - padzero(elf_bss); - len = (elf_bss + 0xfff) & 0xfffff000; /* What we have mapped so far */ - - pr_debug("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss, - (unsigned long) len); - - /* Map the last of the bss segment */ - if (last_bss > len) { - down_write(¤t->mm->mmap_sem); - do_brk(len, (last_bss - len)); - up_write(¤t->mm->mmap_sem); - } - kfree(elf_phdata); - - *interp_load_addr = load_addr; - return ((unsigned int) interp_elf_ex->e_entry); -} - -/* Check sanity of IRIX elf executable header. */ -static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm) -{ - if (memcmp(ehp->e_ident, ELFMAG, SELFMAG) != 0) - return -ENOEXEC; - - /* First of all, some simple consistency checks */ - if ((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) || - !bprm->file->f_op->mmap) { - return -ENOEXEC; - } - - /* XXX Don't support N32 or 64bit binaries yet because they can - * XXX and do execute 64 bit instructions and expect all registers - * XXX to be 64 bit as well. We need to make the kernel save - * XXX all registers as 64bits on cpu's capable of this at - * XXX exception time plus frob the XTLB exception vector. - */ - if ((ehp->e_flags & EF_MIPS_ABI2)) - return -ENOEXEC; - - return 0; -} - -/* - * This is where the detailed check is performed. Irix binaries - * use interpreters with 'libc.so' in the name, so this function - * can differentiate between Linux and Irix binaries. - */ -static inline int look_for_irix_interpreter(char **name, - struct file **interpreter, - struct elfhdr *interp_elf_ex, - struct elf_phdr *epp, - struct linux_binprm *bprm, int pnum) -{ - int i; - int retval = -EINVAL; - struct file *file = NULL; - - *name = NULL; - for (i = 0; i < pnum; i++, epp++) { - if (epp->p_type != PT_INTERP) - continue; - - /* It is illegal to have two interpreters for one executable. */ - if (*name != NULL) - goto out; - - *name = kmalloc(epp->p_filesz + strlen(IRIX_EMUL), GFP_KERNEL); - if (!*name) - return -ENOMEM; - - strcpy(*name, IRIX_EMUL); - retval = kernel_read(bprm->file, epp->p_offset, (*name + 16), - epp->p_filesz); - if (retval < 0) - goto out; - - file = open_exec(*name); - if (IS_ERR(file)) { - retval = PTR_ERR(file); - goto out; - } - retval = kernel_read(file, 0, bprm->buf, 128); - if (retval < 0) - goto dput_and_out; - - *interp_elf_ex = *(struct elfhdr *) bprm->buf; - } - *interpreter = file; - return 0; - -dput_and_out: - fput(file); -out: - kfree(*name); - return retval; -} - -static inline int verify_irix_interpreter(struct elfhdr *ihp) -{ - if (memcmp(ihp->e_ident, ELFMAG, SELFMAG) != 0) - return -ELIBBAD; - return 0; -} - -#define EXEC_MAP_FLAGS (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE) - -static inline void map_executable(struct file *fp, struct elf_phdr *epp, int pnum, - unsigned int *estack, unsigned int *laddr, - unsigned int *scode, unsigned int *ebss, - unsigned int *ecode, unsigned int *edata, - unsigned int *ebrk) -{ - unsigned int tmp; - int i, prot; - - for (i = 0; i < pnum; i++, epp++) { - if (epp->p_type != PT_LOAD) - continue; - - /* Map it. */ - prot = (epp->p_flags & PF_R) ? PROT_READ : 0; - prot |= (epp->p_flags & PF_W) ? PROT_WRITE : 0; - prot |= (epp->p_flags & PF_X) ? PROT_EXEC : 0; - down_write(¤t->mm->mmap_sem); - (void) do_mmap(fp, (epp->p_vaddr & 0xfffff000), - (epp->p_filesz + (epp->p_vaddr & 0xfff)), - prot, EXEC_MAP_FLAGS, - (epp->p_offset & 0xfffff000)); - up_write(¤t->mm->mmap_sem); - - /* Fixup location tracking vars. */ - if ((epp->p_vaddr & 0xfffff000) < *estack) - *estack = (epp->p_vaddr & 0xfffff000); - if (!*laddr) - *laddr = epp->p_vaddr - epp->p_offset; - if (epp->p_vaddr < *scode) - *scode = epp->p_vaddr; - - tmp = epp->p_vaddr + epp->p_filesz; - if (tmp > *ebss) - *ebss = tmp; - if ((epp->p_flags & PF_X) && *ecode < tmp) - *ecode = tmp; - if (*edata < tmp) - *edata = tmp; - - tmp = epp->p_vaddr + epp->p_memsz; - if (tmp > *ebrk) - *ebrk = tmp; - } - -} - -static inline int map_interpreter(struct elf_phdr *epp, struct elfhdr *ihp, - struct file *interp, unsigned int *iladdr, - int pnum, mm_segment_t old_fs, - unsigned int *eentry) -{ - int i; - - *eentry = 0xffffffff; - for (i = 0; i < pnum; i++, epp++) { - if (epp->p_type != PT_INTERP) - continue; - - /* We should have fielded this error elsewhere... */ - if (*eentry != 0xffffffff) - return -1; - - set_fs(old_fs); - *eentry = load_irix_interp(ihp, interp, iladdr); - old_fs = get_fs(); - set_fs(get_ds()); - - fput(interp); - - if (*eentry == 0xffffffff) - return -1; - } - return 0; -} - -/* - * IRIX maps a page at 0x200000 that holds information about the - * process and the system, here we map the page and fill the - * structure - */ -static int irix_map_prda_page(void) -{ - unsigned long v; - struct prda *pp; - - down_write(¤t->mm->mmap_sem); - v = do_brk(PRDA_ADDRESS, PAGE_SIZE); - up_write(¤t->mm->mmap_sem); - - if (v != PRDA_ADDRESS) - return v; /* v must be an error code */ - - pp = (struct prda *) v; - pp->prda_sys.t_pid = task_pid_vnr(current); - pp->prda_sys.t_prid = read_c0_prid(); - pp->prda_sys.t_rpid = task_pid_vnr(current); - - /* We leave the rest set to zero */ - - return 0; -} - - - -/* These are the functions used to load ELF style executables and shared - * libraries. There is no binary dependent code anywhere else. - */ -static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs) -{ - struct elfhdr elf_ex, interp_elf_ex; - struct file *interpreter; - struct elf_phdr *elf_phdata, *elf_ihdr, *elf_ephdr; - unsigned int load_addr, elf_bss, elf_brk; - unsigned int elf_entry, interp_load_addr = 0; - unsigned int start_code, end_code, end_data, elf_stack; - int retval, has_interp, has_ephdr, size, i; - char *elf_interpreter; - mm_segment_t old_fs; - - load_addr = 0; - has_interp = has_ephdr = 0; - elf_ihdr = elf_ephdr = NULL; - elf_ex = *((struct elfhdr *) bprm->buf); - retval = -ENOEXEC; - - if (verify_binary(&elf_ex, bprm)) - goto out; - - /* - * Telling -o32 static binaries from Linux and Irix apart from each - * other is difficult. There are 2 differences to be noted for static - * binaries from the 2 operating systems: - * - * 1) Irix binaries have their .text section before their .init - * section. Linux binaries are just the opposite. - * - * 2) Irix binaries usually have <= 12 sections and Linux - * binaries have > 20. - * - * We will use Method #2 since Method #1 would require us to read in - * the section headers which is way too much overhead. This appears - * to work for everything we have ran into so far. If anyone has a - * better method to tell the binaries apart, I'm listening. - */ - if (elf_ex.e_shnum > 20) - goto out; - - print_elfhdr(&elf_ex); - - /* Now read in all of the header information */ - size = elf_ex.e_phentsize * elf_ex.e_phnum; - if (size > 65536) - goto out; - elf_phdata = kmalloc(size, GFP_KERNEL); - if (elf_phdata == NULL) { - retval = -ENOMEM; - goto out; - } - - retval = kernel_read(bprm->file, elf_ex.e_phoff, (char *)elf_phdata, size); - if (retval < 0) - goto out_free_ph; - - dump_phdrs(elf_phdata, elf_ex.e_phnum); - - /* Set some things for later. */ - for (i = 0; i < elf_ex.e_phnum; i++) { - switch (elf_phdata[i].p_type) { - case PT_INTERP: - has_interp = 1; - elf_ihdr = &elf_phdata[i]; - break; - case PT_PHDR: - has_ephdr = 1; - elf_ephdr = &elf_phdata[i]; - break; - }; - } - - pr_debug("\n"); - - elf_bss = 0; - elf_brk = 0; - - elf_stack = 0xffffffff; - elf_interpreter = NULL; - start_code = 0xffffffff; - end_code = 0; - end_data = 0; - - /* - * If we get a return value, we change the value to be ENOEXEC - * so that we can exit gracefully and the main binary format - * search loop in 'fs/exec.c' will move onto the next handler - * which should be the normal ELF binary handler. - */ - retval = look_for_irix_interpreter(&elf_interpreter, &interpreter, - &interp_elf_ex, elf_phdata, bprm, - elf_ex.e_phnum); - if (retval) { - retval = -ENOEXEC; - goto out_free_file; - } - - if (elf_interpreter) { - retval = verify_irix_interpreter(&interp_elf_ex); - if (retval) - goto out_free_interp; - } - - /* OK, we are done with that, now set up the arg stuff, - * and then start this sucker up. - */ - retval = -E2BIG; - if (!bprm->sh_bang && !bprm->p) - goto out_free_interp; - - /* Flush all traces of the currently running executable */ - retval = flush_old_exec(bprm); - if (retval) - goto out_free_dentry; - - /* OK, This is the point of no return */ - current->mm->end_data = 0; - current->mm->end_code = 0; - current->mm->mmap = NULL; - current->flags &= ~PF_FORKNOEXEC; - elf_entry = (unsigned int) elf_ex.e_entry; - - /* Do this so that we can load the interpreter, if need be. We will - * change some of these later. - */ - setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT); - current->mm->start_stack = bprm->p; - - /* At this point, we assume that the image should be loaded at - * fixed address, not at a variable address. - */ - old_fs = get_fs(); - set_fs(get_ds()); - - map_executable(bprm->file, elf_phdata, elf_ex.e_phnum, &elf_stack, - &load_addr, &start_code, &elf_bss, &end_code, - &end_data, &elf_brk); - - if (elf_interpreter) { - retval = map_interpreter(elf_phdata, &interp_elf_ex, - interpreter, &interp_load_addr, - elf_ex.e_phnum, old_fs, &elf_entry); - kfree(elf_interpreter); - if (retval) { - set_fs(old_fs); - printk("Unable to load IRIX ELF interpreter\n"); - send_sig(SIGSEGV, current, 0); - retval = 0; - goto out_free_file; - } - } - - set_fs(old_fs); - - kfree(elf_phdata); - set_personality(PER_IRIX32); - set_binfmt(&irix_format); - compute_creds(bprm); - current->flags &= ~PF_FORKNOEXEC; - bprm->p = (unsigned long) - create_irix_tables((char *)bprm->p, bprm->argc, bprm->envc, - (elf_interpreter ? &elf_ex : NULL), - load_addr, interp_load_addr, regs, elf_ephdr); - current->mm->start_brk = current->mm->brk = elf_brk; - current->mm->end_code = end_code; - current->mm->start_code = start_code; - current->mm->end_data = end_data; - current->mm->start_stack = bprm->p; - - /* Calling set_brk effectively mmaps the pages that we need for the - * bss and break sections. - */ - set_brk(elf_bss, elf_brk); - - /* - * IRIX maps a page at 0x200000 which holds some system - * information. Programs depend on this. - */ - if (irix_map_prda_page()) - goto out_free_dentry; - - padzero(elf_bss); - - pr_debug("(start_brk) %lx\n" , (long) current->mm->start_brk); - pr_debug("(end_code) %lx\n" , (long) current->mm->end_code); - pr_debug("(start_code) %lx\n" , (long) current->mm->start_code); - pr_debug("(end_data) %lx\n" , (long) current->mm->end_data); - pr_debug("(start_stack) %lx\n" , (long) current->mm->start_stack); - pr_debug("(brk) %lx\n" , (long) current->mm->brk); - -#if 0 /* XXX No fucking way dude... */ - /* Why this, you ask??? Well SVr4 maps page 0 as read-only, - * and some applications "depend" upon this behavior. - * Since we do not have the power to recompile these, we - * emulate the SVr4 behavior. Sigh. - */ - down_write(¤t->mm->mmap_sem); - (void) do_mmap(NULL, 0, 4096, PROT_READ | PROT_EXEC, - MAP_FIXED | MAP_PRIVATE, 0); - up_write(¤t->mm->mmap_sem); -#endif - - start_thread(regs, elf_entry, bprm->p); - if (current->ptrace & PT_PTRACED) - send_sig(SIGTRAP, current, 0); - return 0; -out: - return retval; - -out_free_dentry: - allow_write_access(interpreter); - fput(interpreter); -out_free_interp: - kfree(elf_interpreter); -out_free_file: -out_free_ph: - kfree(elf_phdata); - goto out; -} - -/* This is really simpleminded and specialized - we are loading an - * a.out library that is given an ELF header. - */ -static int load_irix_library(struct file *file) -{ - struct elfhdr elf_ex; - struct elf_phdr *elf_phdata = NULL; - unsigned int len = 0; - int elf_bss = 0; - int retval; - unsigned int bss; - int error; - int i, j, k; - - error = kernel_read(file, 0, (char *) &elf_ex, sizeof(elf_ex)); - if (error != sizeof(elf_ex)) - return -ENOEXEC; - - if (memcmp(elf_ex.e_ident, ELFMAG, SELFMAG) != 0) - return -ENOEXEC; - - /* First of all, some simple consistency checks. */ - if (elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 || - !file->f_op->mmap) - return -ENOEXEC; - - /* Now read in all of the header information. */ - if (sizeof(struct elf_phdr) * elf_ex.e_phnum > PAGE_SIZE) - return -ENOEXEC; - - elf_phdata = kmalloc(sizeof(struct elf_phdr) * elf_ex.e_phnum, GFP_KERNEL); - if (elf_phdata == NULL) - return -ENOMEM; - - retval = kernel_read(file, elf_ex.e_phoff, (char *) elf_phdata, - sizeof(struct elf_phdr) * elf_ex.e_phnum); - - j = 0; - for (i=0; ip_type == PT_LOAD) j++; - - if (j != 1) { - kfree(elf_phdata); - return -ENOEXEC; - } - - while (elf_phdata->p_type != PT_LOAD) elf_phdata++; - - /* Now use mmap to map the library into memory. */ - down_write(¤t->mm->mmap_sem); - error = do_mmap(file, - elf_phdata->p_vaddr & 0xfffff000, - elf_phdata->p_filesz + (elf_phdata->p_vaddr & 0xfff), - PROT_READ | PROT_WRITE | PROT_EXEC, - MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE, - elf_phdata->p_offset & 0xfffff000); - up_write(¤t->mm->mmap_sem); - - k = elf_phdata->p_vaddr + elf_phdata->p_filesz; - if (k > elf_bss) elf_bss = k; - - if (error != (elf_phdata->p_vaddr & 0xfffff000)) { - kfree(elf_phdata); - return error; - } - - padzero(elf_bss); - - len = (elf_phdata->p_filesz + elf_phdata->p_vaddr+ 0xfff) & 0xfffff000; - bss = elf_phdata->p_memsz + elf_phdata->p_vaddr; - if (bss > len) { - down_write(¤t->mm->mmap_sem); - do_brk(len, bss-len); - up_write(¤t->mm->mmap_sem); - } - kfree(elf_phdata); - return 0; -} - -/* Called through irix_syssgi() to map an elf image given an FD, - * a phdr ptr USER_PHDRP in userspace, and a count CNT telling how many - * phdrs there are in the USER_PHDRP array. We return the vaddr the - * first phdr was successfully mapped to. - */ -unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt) -{ - unsigned long type, vaddr, filesz, offset, flags; - struct elf_phdr __user *hp; - struct file *filp; - int i, retval; - - pr_debug("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n", - fd, user_phdrp, cnt); - - /* First get the verification out of the way. */ - hp = user_phdrp; - if (!access_ok(VERIFY_READ, hp, (sizeof(struct elf_phdr) * cnt))) { - pr_debug("irix_mapelf: bad pointer to ELF PHDR!\n"); - - return -EFAULT; - } - - dump_phdrs(user_phdrp, cnt); - - for (i = 0; i < cnt; i++, hp++) { - if (__get_user(type, &hp->p_type)) - return -EFAULT; - if (type != PT_LOAD) { - printk("irix_mapelf: One section is not PT_LOAD!\n"); - return -ENOEXEC; - } - } - - filp = fget(fd); - if (!filp) - return -EACCES; - if (!filp->f_op) { - printk("irix_mapelf: Bogon filp!\n"); - fput(filp); - return -EACCES; - } - - hp = user_phdrp; - for (i = 0; i < cnt; i++, hp++) { - int prot; - - retval = __get_user(vaddr, &hp->p_vaddr); - retval |= __get_user(filesz, &hp->p_filesz); - retval |= __get_user(offset, &hp->p_offset); - retval |= __get_user(flags, &hp->p_flags); - if (retval) - return retval; - - prot = (flags & PF_R) ? PROT_READ : 0; - prot |= (flags & PF_W) ? PROT_WRITE : 0; - prot |= (flags & PF_X) ? PROT_EXEC : 0; - - down_write(¤t->mm->mmap_sem); - retval = do_mmap(filp, (vaddr & 0xfffff000), - (filesz + (vaddr & 0xfff)), - prot, (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE), - (offset & 0xfffff000)); - up_write(¤t->mm->mmap_sem); - - if (retval != (vaddr & 0xfffff000)) { - printk("irix_mapelf: do_mmap fails with %d!\n", retval); - fput(filp); - return retval; - } - } - - pr_debug("irix_mapelf: Success, returning %08lx\n", - (unsigned long) user_phdrp->p_vaddr); - - fput(filp); - - if (__get_user(vaddr, &user_phdrp->p_vaddr)) - return -EFAULT; - - return vaddr; -} - -/* - * ELF core dumper - * - * Modelled on fs/exec.c:aout_core_dump() - * Jeremy Fitzhardinge - */ - -/* These are the only things you should do on a core-file: use only these - * functions to write out all the necessary info. - */ -static int dump_write(struct file *file, const void __user *addr, int nr) -{ - return file->f_op->write(file, (const char __user *) addr, nr, &file->f_pos) == nr; -} - -static int dump_seek(struct file *file, off_t off) -{ - if (file->f_op->llseek) { - if (file->f_op->llseek(file, off, 0) != off) - return 0; - } else - file->f_pos = off; - return 1; -} - -/* Decide whether a segment is worth dumping; default is yes to be - * sure (missing info is worse than too much; etc). - * Personally I'd include everything, and use the coredump limit... - * - * I think we should skip something. But I am not sure how. H.J. - */ -static inline int maydump(struct vm_area_struct *vma) -{ - if (!(vma->vm_flags & (VM_READ|VM_WRITE|VM_EXEC))) - return 0; -#if 1 - if (vma->vm_flags & (VM_WRITE|VM_GROWSUP|VM_GROWSDOWN)) - return 1; - if (vma->vm_flags & (VM_READ|VM_EXEC|VM_EXECUTABLE|VM_SHARED)) - return 0; -#endif - return 1; -} - -/* An ELF note in memory. */ -struct memelfnote -{ - const char *name; - int type; - unsigned int datasz; - void *data; -}; - -static int notesize(struct memelfnote *en) -{ - int sz; - - sz = sizeof(struct elf_note); - sz += roundup(strlen(en->name) + 1, 4); - sz += roundup(en->datasz, 4); - - return sz; -} - -#define DUMP_WRITE(addr, nr) \ - if (!dump_write(file, (addr), (nr))) \ - goto end_coredump; -#define DUMP_SEEK(off) \ - if (!dump_seek(file, (off))) \ - goto end_coredump; - -static int writenote(struct memelfnote *men, struct file *file) -{ - struct elf_note en; - - en.n_namesz = strlen(men->name) + 1; - en.n_descsz = men->datasz; - en.n_type = men->type; - - DUMP_WRITE(&en, sizeof(en)); - DUMP_WRITE(men->name, en.n_namesz); - /* XXX - cast from long long to long to avoid need for libgcc.a */ - DUMP_SEEK(roundup((unsigned long)file->f_pos, 4)); /* XXX */ - DUMP_WRITE(men->data, men->datasz); - DUMP_SEEK(roundup((unsigned long)file->f_pos, 4)); /* XXX */ - - return 1; - -end_coredump: - return 0; -} -#undef DUMP_WRITE -#undef DUMP_SEEK - -#define DUMP_WRITE(addr, nr) \ - if (!dump_write(file, (addr), (nr))) \ - goto end_coredump; -#define DUMP_SEEK(off) \ - if (!dump_seek(file, (off))) \ - goto end_coredump; - -/* Actual dumper. - * - * This is a two-pass process; first we find the offsets of the bits, - * and then they are actually written out. If we run out of core limit - * we just truncate. - */ -static int irix_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit) -{ - int has_dumped = 0; - mm_segment_t fs; - int segs; - int i; - size_t size; - struct vm_area_struct *vma; - struct elfhdr elf; - off_t offset = 0, dataoff; - int numnote = 3; - struct memelfnote notes[3]; - struct elf_prstatus prstatus; /* NT_PRSTATUS */ - elf_fpregset_t fpu; /* NT_PRFPREG */ - struct elf_prpsinfo psinfo; /* NT_PRPSINFO */ - - /* Count what's needed to dump, up to the limit of coredump size. */ - segs = 0; - size = 0; - for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) { - if (maydump(vma)) - { - int sz = vma->vm_end-vma->vm_start; - - if (size+sz >= limit) - break; - else - size += sz; - } - - segs++; - } - pr_debug("irix_core_dump: %d segs taking %d bytes\n", segs, size); - - /* Set up header. */ - memcpy(elf.e_ident, ELFMAG, SELFMAG); - elf.e_ident[EI_CLASS] = ELFCLASS32; - elf.e_ident[EI_DATA] = ELFDATA2LSB; - elf.e_ident[EI_VERSION] = EV_CURRENT; - elf.e_ident[EI_OSABI] = ELF_OSABI; - memset(elf.e_ident+EI_PAD, 0, EI_NIDENT-EI_PAD); - - elf.e_type = ET_CORE; - elf.e_machine = ELF_ARCH; - elf.e_version = EV_CURRENT; - elf.e_entry = 0; - elf.e_phoff = sizeof(elf); - elf.e_shoff = 0; - elf.e_flags = 0; - elf.e_ehsize = sizeof(elf); - elf.e_phentsize = sizeof(struct elf_phdr); - elf.e_phnum = segs+1; /* Include notes. */ - elf.e_shentsize = 0; - elf.e_shnum = 0; - elf.e_shstrndx = 0; - - fs = get_fs(); - set_fs(KERNEL_DS); - - has_dumped = 1; - current->flags |= PF_DUMPCORE; - - DUMP_WRITE(&elf, sizeof(elf)); - offset += sizeof(elf); /* Elf header. */ - offset += (segs+1) * sizeof(struct elf_phdr); /* Program headers. */ - - /* Set up the notes in similar form to SVR4 core dumps made - * with info from their /proc. - */ - memset(&psinfo, 0, sizeof(psinfo)); - memset(&prstatus, 0, sizeof(prstatus)); - - notes[0].name = "CORE"; - notes[0].type = NT_PRSTATUS; - notes[0].datasz = sizeof(prstatus); - notes[0].data = &prstatus; - prstatus.pr_info.si_signo = prstatus.pr_cursig = signr; - prstatus.pr_sigpend = current->pending.signal.sig[0]; - prstatus.pr_sighold = current->blocked.sig[0]; - psinfo.pr_pid = prstatus.pr_pid = task_pid_vnr(current); - psinfo.pr_ppid = prstatus.pr_ppid = task_pid_vnr(current->parent); - psinfo.pr_pgrp = prstatus.pr_pgrp = task_pgrp_vnr(current); - psinfo.pr_sid = prstatus.pr_sid = task_session_vnr(current); - if (thread_group_leader(current)) { - /* - * This is the record for the group leader. Add in the - * cumulative times of previous dead threads. This total - * won't include the time of each live thread whose state - * is included in the core dump. The final total reported - * to our parent process when it calls wait4 will include - * those sums as well as the little bit more time it takes - * this and each other thread to finish dying after the - * core dump synchronization phase. - */ - jiffies_to_timeval(current->utime + current->signal->utime, - &prstatus.pr_utime); - jiffies_to_timeval(current->stime + current->signal->stime, - &prstatus.pr_stime); - } else { - jiffies_to_timeval(current->utime, &prstatus.pr_utime); - jiffies_to_timeval(current->stime, &prstatus.pr_stime); - } - jiffies_to_timeval(current->signal->cutime, &prstatus.pr_cutime); - jiffies_to_timeval(current->signal->cstime, &prstatus.pr_cstime); - - if (sizeof(elf_gregset_t) != sizeof(struct pt_regs)) { - printk("sizeof(elf_gregset_t) (%d) != sizeof(struct pt_regs) " - "(%d)\n", sizeof(elf_gregset_t), sizeof(struct pt_regs)); - } else { - *(struct pt_regs *)&prstatus.pr_reg = *regs; - } - - notes[1].name = "CORE"; - notes[1].type = NT_PRPSINFO; - notes[1].datasz = sizeof(psinfo); - notes[1].data = &psinfo; - i = current->state ? ffz(~current->state) + 1 : 0; - psinfo.pr_state = i; - psinfo.pr_sname = (i < 0 || i > 5) ? '.' : "RSDZTD"[i]; - psinfo.pr_zomb = psinfo.pr_sname == 'Z'; - psinfo.pr_nice = task_nice(current); - psinfo.pr_flag = current->flags; - psinfo.pr_uid = current->uid; - psinfo.pr_gid = current->gid; - { - int i, len; - - set_fs(fs); - - len = current->mm->arg_end - current->mm->arg_start; - len = len >= ELF_PRARGSZ ? ELF_PRARGSZ : len; - (void *) copy_from_user(&psinfo.pr_psargs, - (const char __user *)current->mm->arg_start, len); - for (i = 0; i < len; i++) - if (psinfo.pr_psargs[i] == 0) - psinfo.pr_psargs[i] = ' '; - psinfo.pr_psargs[len] = 0; - - set_fs(KERNEL_DS); - } - strlcpy(psinfo.pr_fname, current->comm, sizeof(psinfo.pr_fname)); - - /* Try to dump the FPU. */ - prstatus.pr_fpvalid = dump_fpu(regs, &fpu); - if (!prstatus.pr_fpvalid) { - numnote--; - } else { - notes[2].name = "CORE"; - notes[2].type = NT_PRFPREG; - notes[2].datasz = sizeof(fpu); - notes[2].data = &fpu; - } - - /* Write notes phdr entry. */ - { - struct elf_phdr phdr; - int sz = 0; - - for (i = 0; i < numnote; i++) - sz += notesize(¬es[i]); - - phdr.p_type = PT_NOTE; - phdr.p_offset = offset; - phdr.p_vaddr = 0; - phdr.p_paddr = 0; - phdr.p_filesz = sz; - phdr.p_memsz = 0; - phdr.p_flags = 0; - phdr.p_align = 0; - - offset += phdr.p_filesz; - DUMP_WRITE(&phdr, sizeof(phdr)); - } - - /* Page-align dumped data. */ - dataoff = offset = roundup(offset, PAGE_SIZE); - - /* Write program headers for segments dump. */ - for (vma = current->mm->mmap, i = 0; - i < segs && vma != NULL; vma = vma->vm_next) { - struct elf_phdr phdr; - size_t sz; - - i++; - - sz = vma->vm_end - vma->vm_start; - - phdr.p_type = PT_LOAD; - phdr.p_offset = offset; - phdr.p_vaddr = vma->vm_start; - phdr.p_paddr = 0; - phdr.p_filesz = maydump(vma) ? sz : 0; - phdr.p_memsz = sz; - offset += phdr.p_filesz; - phdr.p_flags = vma->vm_flags & VM_READ ? PF_R : 0; - if (vma->vm_flags & VM_WRITE) - phdr.p_flags |= PF_W; - if (vma->vm_flags & VM_EXEC) - phdr.p_flags |= PF_X; - phdr.p_align = PAGE_SIZE; - - DUMP_WRITE(&phdr, sizeof(phdr)); - } - - for (i = 0; i < numnote; i++) - if (!writenote(¬es[i], file)) - goto end_coredump; - - set_fs(fs); - - DUMP_SEEK(dataoff); - - for (i = 0, vma = current->mm->mmap; - i < segs && vma != NULL; - vma = vma->vm_next) { - unsigned long addr = vma->vm_start; - unsigned long len = vma->vm_end - vma->vm_start; - - if (!maydump(vma)) - continue; - i++; - pr_debug("elf_core_dump: writing %08lx %lx\n", addr, len); - DUMP_WRITE((void __user *)addr, len); - } - - if ((off_t) file->f_pos != offset) { - /* Sanity check. */ - printk("elf_core_dump: file->f_pos (%ld) != offset (%ld)\n", - (off_t) file->f_pos, offset); - } - -end_coredump: - set_fs(fs); - return has_dumped; -} - -static int __init init_irix_binfmt(void) -{ - extern int init_inventory(void); - extern asmlinkage unsigned long sys_call_table; - extern asmlinkage unsigned long sys_call_table_irix5; - - init_inventory(); - - /* - * Copy the IRIX5 syscall table (8000 bytes) into the main syscall - * table. The IRIX5 calls are located by an offset of 8000 bytes - * from the beginning of the main table. - */ - memcpy((void *) ((unsigned long) &sys_call_table + 8000), - &sys_call_table_irix5, 8000); - - return register_binfmt(&irix_format); -} - -static void __exit exit_irix_binfmt(void) -{ - /* - * Remove the Irix ELF loader. - */ - unregister_binfmt(&irix_format); -} - -module_init(init_irix_binfmt) -module_exit(exit_irix_binfmt) diff --git a/arch/mips/kernel/irixinv.c b/arch/mips/kernel/irixinv.c deleted file mode 100644 index cf2dcd3d6a93..000000000000 --- a/arch/mips/kernel/irixinv.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Support the inventory interface for IRIX binaries - * This is invoked before the mm layer is working, so we do not - * use the linked lists for the inventory yet. - * - * Miguel de Icaza, 1997. - */ -#include -#include -#include - -#define MAX_INVENTORY 50 -int inventory_items = 0; - -static inventory_t inventory [MAX_INVENTORY]; - -void add_to_inventory(int class, int type, int controller, int unit, int state) -{ - inventory_t *ni = &inventory [inventory_items]; - - if (inventory_items == MAX_INVENTORY) - return; - - ni->inv_class = class; - ni->inv_type = type; - ni->inv_controller = controller; - ni->inv_unit = unit; - ni->inv_state = state; - ni->inv_next = ni; - inventory_items++; -} - -int dump_inventory_to_user(void __user *userbuf, int size) -{ - inventory_t *inv = &inventory [0]; - inventory_t __user *user = userbuf; - int v; - - if (!access_ok(VERIFY_WRITE, userbuf, size)) - return -EFAULT; - - for (v = 0; v < inventory_items; v++){ - inv = &inventory [v]; - if (copy_to_user (user, inv, sizeof (inventory_t))) - return -EFAULT; - user++; - } - return inventory_items * sizeof(inventory_t); -} - -int __init init_inventory(void) -{ - /* - * gross hack while we put the right bits all over the kernel - * most likely this will not let just anyone run the X server - * until we put the right values all over the place - */ - add_to_inventory(10, 3, 0, 0, 16400); - add_to_inventory(1, 1, 150, -1, 12); - add_to_inventory(1, 3, 0, 0, 8976); - add_to_inventory(1, 2, 0, 0, 8976); - add_to_inventory(4, 8, 0, 0, 2); - add_to_inventory(5, 5, 0, 0, 1); - add_to_inventory(3, 3, 0, 0, 32768); - add_to_inventory(3, 4, 0, 0, 32768); - add_to_inventory(3, 8, 0, 0, 524288); - add_to_inventory(3, 9, 0, 0, 64); - add_to_inventory(3, 1, 0, 0, 67108864); - add_to_inventory(12, 3, 0, 0, 16); - add_to_inventory(8, 7, 17, 0, 16777472); - add_to_inventory(8, 0, 0, 0, 1); - add_to_inventory(2, 1, 0, 13, 2); - add_to_inventory(2, 2, 0, 2, 0); - add_to_inventory(2, 2, 0, 1, 0); - add_to_inventory(7, 14, 0, 0, 6); - - return 0; -} diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c deleted file mode 100644 index b39bdba82e02..000000000000 --- a/arch/mips/kernel/irixioctl.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * irixioctl.c: A fucking mess... - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#undef DEBUG_IOCTLS -#undef DEBUG_MISSING_IOCTL - -struct irix_termios { - tcflag_t c_iflag, c_oflag, c_cflag, c_lflag; - cc_t c_cc[NCCS]; -}; - -asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg) -{ - struct tty_struct *tp, *rtp; - mm_segment_t old_fs; - int i, error = 0; - -#ifdef DEBUG_IOCTLS - printk("[%s:%d] irix_ioctl(%d, ", current->comm, current->pid, fd); -#endif - switch(cmd) { - case 0x00005401: -#ifdef DEBUG_IOCTLS - printk("TCGETA, %08lx) ", arg); -#endif - error = sys_ioctl(fd, TCGETA, arg); - break; - - case 0x0000540d: { - struct termios kt; - struct irix_termios __user *it = - (struct irix_termios __user *) arg; - -#ifdef DEBUG_IOCTLS - printk("TCGETS, %08lx) ", arg); -#endif - if (!access_ok(VERIFY_WRITE, it, sizeof(*it))) { - error = -EFAULT; - break; - } - old_fs = get_fs(); set_fs(get_ds()); - error = sys_ioctl(fd, TCGETS, (unsigned long) &kt); - set_fs(old_fs); - if (error) - break; - - error = __put_user(kt.c_iflag, &it->c_iflag); - error |= __put_user(kt.c_oflag, &it->c_oflag); - error |= __put_user(kt.c_cflag, &it->c_cflag); - error |= __put_user(kt.c_lflag, &it->c_lflag); - - for (i = 0; i < NCCS; i++) - error |= __put_user(kt.c_cc[i], &it->c_cc[i]); - break; - } - - case 0x0000540e: { - struct termios kt; - struct irix_termios *it = (struct irix_termios *) arg; - -#ifdef DEBUG_IOCTLS - printk("TCSETS, %08lx) ", arg); -#endif - if (!access_ok(VERIFY_READ, it, sizeof(*it))) { - error = -EFAULT; - break; - } - old_fs = get_fs(); set_fs(get_ds()); - error = sys_ioctl(fd, TCGETS, (unsigned long) &kt); - set_fs(old_fs); - if (error) - break; - - error = __get_user(kt.c_iflag, &it->c_iflag); - error |= __get_user(kt.c_oflag, &it->c_oflag); - error |= __get_user(kt.c_cflag, &it->c_cflag); - error |= __get_user(kt.c_lflag, &it->c_lflag); - - for (i = 0; i < NCCS; i++) - error |= __get_user(kt.c_cc[i], &it->c_cc[i]); - - if (error) - break; - old_fs = get_fs(); set_fs(get_ds()); - error = sys_ioctl(fd, TCSETS, (unsigned long) &kt); - set_fs(old_fs); - break; - } - - case 0x0000540f: -#ifdef DEBUG_IOCTLS - printk("TCSETSW, %08lx) ", arg); -#endif - error = sys_ioctl(fd, TCSETSW, arg); - break; - - case 0x00005471: -#ifdef DEBUG_IOCTLS - printk("TIOCNOTTY, %08lx) ", arg); -#endif - error = sys_ioctl(fd, TIOCNOTTY, arg); - break; - - case 0x00007416: { - pid_t pid; -#ifdef DEBUG_IOCTLS - printk("TIOCGSID, %08lx) ", arg); -#endif - old_fs = get_fs(); set_fs(get_ds()); - error = sys_ioctl(fd, TIOCGSID, (unsigned long)&pid); - set_fs(old_fs); - if (!error) - error = put_user(pid, (unsigned long __user *) arg); - break; - } - case 0x746e: - /* TIOCSTART, same effect as hitting ^Q */ -#ifdef DEBUG_IOCTLS - printk("TIOCSTART, %08lx) ", arg); -#endif - error = sys_ioctl(fd, TCXONC, TCOON); - break; - - case 0x20006968: -#ifdef DEBUG_IOCTLS - printk("SIOCGETLABEL, %08lx) ", arg); -#endif - error = -ENOPKG; - break; - - case 0x40047477: -#ifdef DEBUG_IOCTLS - printk("TIOCGPGRP, %08lx) ", arg); -#endif - error = sys_ioctl(fd, TIOCGPGRP, arg); -#ifdef DEBUG_IOCTLS - printk("arg=%d ", *(int *)arg); -#endif - break; - - case 0x40087468: -#ifdef DEBUG_IOCTLS - printk("TIOCGWINSZ, %08lx) ", arg); -#endif - error = sys_ioctl(fd, TIOCGWINSZ, arg); - break; - - case 0x8004667e: - error = sys_ioctl(fd, FIONBIO, arg); - break; - - case 0x80047476: - error = sys_ioctl(fd, TIOCSPGRP, arg); - break; - - case 0x8020690c: - error = sys_ioctl(fd, SIOCSIFADDR, arg); - break; - - case 0x80206910: - error = sys_ioctl(fd, SIOCSIFFLAGS, arg); - break; - - case 0xc0206911: - error = sys_ioctl(fd, SIOCGIFFLAGS, arg); - break; - - case 0xc020691b: - error = sys_ioctl(fd, SIOCGIFMETRIC, arg); - break; - - default: { -#ifdef DEBUG_MISSING_IOCTL - char *msg = "Unimplemented IOCTL cmd tell linux-mips@linux-mips.org\n"; - -#ifdef DEBUG_IOCTLS - printk("UNIMP_IOCTL, %08lx)\n", arg); -#endif - old_fs = get_fs(); set_fs(get_ds()); - sys_write(2, msg, strlen(msg)); - set_fs(old_fs); - printk("[%s:%d] Does unimplemented IRIX ioctl cmd %08lx\n", - current->comm, current->pid, cmd); - do_exit(255); -#else - error = sys_ioctl(fd, cmd, arg); -#endif - } - - }; -#ifdef DEBUG_IOCTLS - printk("error=%d\n", error); -#endif - return error; -} diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c deleted file mode 100644 index 0215c805a592..000000000000 --- a/arch/mips/kernel/irixsig.c +++ /dev/null @@ -1,888 +0,0 @@ -/* - * irixsig.c: WHEEE, IRIX signals! YOW, am I compatible or what?!?! - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - * Copyright (C) 1997 - 2000 Ralf Baechle (ralf@gnu.org) - * Copyright (C) 2000 Silicon Graphics, Inc. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#undef DEBUG_SIG - -#define _S(nr) (1<<((nr)-1)) - -#define _BLOCKABLE (~(_S(SIGKILL) | _S(SIGSTOP))) - -#define _IRIX_NSIG 128 -#define _IRIX_NSIG_BPW BITS_PER_LONG -#define _IRIX_NSIG_WORDS (_IRIX_NSIG / _IRIX_NSIG_BPW) - -typedef struct { - unsigned long sig[_IRIX_NSIG_WORDS]; -} irix_sigset_t; - -struct sigctx_irix5 { - u32 rmask, cp0_status; - u64 pc; - u64 regs[32]; - u64 fpregs[32]; - u32 usedfp, fpcsr, fpeir, sstk_flags; - u64 hi, lo; - u64 cp0_cause, cp0_badvaddr, _unused0; - irix_sigset_t sigset; - u64 weird_fpu_thing; - u64 _unused1[31]; -}; - -#ifdef DEBUG_SIG -/* Debugging */ -static inline void dump_irix5_sigctx(struct sigctx_irix5 *c) -{ - int i; - - printk("misc: rmask[%08lx] status[%08lx] pc[%08lx]\n", - (unsigned long) c->rmask, - (unsigned long) c->cp0_status, - (unsigned long) c->pc); - printk("regs: "); - for(i = 0; i < 16; i++) - printk("[%d]<%08lx> ", i, (unsigned long) c->regs[i]); - printk("\nregs: "); - for(i = 16; i < 32; i++) - printk("[%d]<%08lx> ", i, (unsigned long) c->regs[i]); - printk("\nfpregs: "); - for(i = 0; i < 16; i++) - printk("[%d]<%08lx> ", i, (unsigned long) c->fpregs[i]); - printk("\nfpregs: "); - for(i = 16; i < 32; i++) - printk("[%d]<%08lx> ", i, (unsigned long) c->fpregs[i]); - printk("misc: usedfp[%d] fpcsr[%08lx] fpeir[%08lx] stk_flgs[%08lx]\n", - (int) c->usedfp, (unsigned long) c->fpcsr, - (unsigned long) c->fpeir, (unsigned long) c->sstk_flags); - printk("misc: hi[%08lx] lo[%08lx] cause[%08lx] badvaddr[%08lx]\n", - (unsigned long) c->hi, (unsigned long) c->lo, - (unsigned long) c->cp0_cause, (unsigned long) c->cp0_badvaddr); - printk("misc: sigset<0>[%08lx] sigset<1>[%08lx] sigset<2>[%08lx] " - "sigset<3>[%08lx]\n", (unsigned long) c->sigset.sig[0], - (unsigned long) c->sigset.sig[1], - (unsigned long) c->sigset.sig[2], - (unsigned long) c->sigset.sig[3]); -} -#endif - -static int setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs, - int signr, sigset_t *oldmask) -{ - struct sigctx_irix5 __user *ctx; - unsigned long sp; - int error, i; - - sp = regs->regs[29]; - sp -= sizeof(struct sigctx_irix5); - sp &= ~(0xf); - ctx = (struct sigctx_irix5 __user *) sp; - if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx))) - goto segv_and_exit; - - error = __put_user(0, &ctx->weird_fpu_thing); - error |= __put_user(~(0x00000001), &ctx->rmask); - error |= __put_user(0, &ctx->regs[0]); - for(i = 1; i < 32; i++) - error |= __put_user((u64) regs->regs[i], &ctx->regs[i]); - - error |= __put_user((u64) regs->hi, &ctx->hi); - error |= __put_user((u64) regs->lo, &ctx->lo); - error |= __put_user((u64) regs->cp0_epc, &ctx->pc); - error |= __put_user(!!used_math(), &ctx->usedfp); - error |= __put_user((u64) regs->cp0_cause, &ctx->cp0_cause); - error |= __put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr); - - error |= __put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */ - - error |= __copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t)) ? -EFAULT : 0; - - if (error) - goto segv_and_exit; - -#ifdef DEBUG_SIG - dump_irix5_sigctx(ctx); -#endif - - regs->regs[4] = (unsigned long) signr; - regs->regs[5] = 0; /* XXX sigcode XXX */ - regs->regs[6] = regs->regs[29] = sp; - regs->regs[7] = (unsigned long) ka->sa.sa_handler; - regs->regs[25] = regs->cp0_epc = (unsigned long) ka->sa_restorer; - - return 1; - -segv_and_exit: - force_sigsegv(signr, current); - return 0; -} - -static int inline -setup_irix_rt_frame(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *oldmask, siginfo_t *info) -{ - printk("Aiee: setup_tr_frame wants to be written"); - do_exit(SIGSEGV); -} - -static inline int handle_signal(unsigned long sig, siginfo_t *info, - struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) -{ - int ret; - - switch(regs->regs[0]) { - case ERESTARTNOHAND: - regs->regs[2] = EINTR; - break; - case ERESTARTSYS: - if(!(ka->sa.sa_flags & SA_RESTART)) { - regs->regs[2] = EINTR; - break; - } - /* fallthrough */ - case ERESTARTNOINTR: /* Userland will reload $v0. */ - regs->cp0_epc -= 8; - } - - regs->regs[0] = 0; /* Don't deal with this again. */ - - if (ka->sa.sa_flags & SA_SIGINFO) - ret = setup_irix_rt_frame(ka, regs, sig, oldset, info); - else - ret = setup_irix_frame(ka, regs, sig, oldset); - - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked, sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - return ret; -} - -void do_irix_signal(struct pt_regs *regs) -{ - struct k_sigaction ka; - siginfo_t info; - int signr; - sigset_t *oldset; - - /* - * We want the common case to go fast, which is why we may in certain - * cases get here from kernel mode. Just return without doing anything - * if so. - */ - if (!user_mode(regs)) - return; - - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - oldset = ¤t->saved_sigmask; - else - oldset = ¤t->blocked; - - signr = get_signal_to_deliver(&info, &ka, regs, NULL); - if (signr > 0) { - /* Whee! Actually deliver the signal. */ - if (handle_signal(signr, &info, &ka, oldset, regs) == 0) { - /* a signal was successfully delivered; the saved - * sigmask will have been stored in the signal frame, - * and will be restored by sigreturn, so we can simply - * clear the TIF_RESTORE_SIGMASK flag */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); - } - - return; - } - - /* - * Who's code doesn't conform to the restartable syscall convention - * dies here!!! The li instruction, a single machine instruction, - * must directly be followed by the syscall instruction. - */ - if (regs->regs[0]) { - if (regs->regs[2] == ERESTARTNOHAND || - regs->regs[2] == ERESTARTSYS || - regs->regs[2] == ERESTARTNOINTR) { - regs->cp0_epc -= 8; - } - if (regs->regs[2] == ERESTART_RESTARTBLOCK) { - regs->regs[2] = __NR_restart_syscall; - regs->regs[7] = regs->regs[26]; - regs->cp0_epc -= 4; - } - regs->regs[0] = 0; /* Don't deal with this again. */ - } - - /* - * If there's no signal to deliver, we just put the saved sigmask - * back - */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) { - clear_thread_flag(TIF_RESTORE_SIGMASK); - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); - } -} - -asmlinkage void -irix_sigreturn(struct pt_regs *regs) -{ - struct sigctx_irix5 __user *context, *magic; - unsigned long umask, mask; - u64 *fregs; - u32 usedfp; - int error, sig, i, base = 0; - sigset_t blocked; - - /* Always make any pending restarted system calls return -EINTR */ - current_thread_info()->restart_block.fn = do_no_restart_syscall; - - if (regs->regs[2] == 1000) - base = 1; - - context = (struct sigctx_irix5 __user *) regs->regs[base + 4]; - magic = (struct sigctx_irix5 __user *) regs->regs[base + 5]; - sig = (int) regs->regs[base + 6]; -#ifdef DEBUG_SIG - printk("[%s:%d] IRIX sigreturn(scp[%p],ucp[%p],sig[%d])\n", - current->comm, current->pid, context, magic, sig); -#endif - if (!context) - context = magic; - if (!access_ok(VERIFY_READ, context, sizeof(struct sigctx_irix5))) - goto badframe; - -#ifdef DEBUG_SIG - dump_irix5_sigctx(context); -#endif - - error = __get_user(regs->cp0_epc, &context->pc); - error |= __get_user(umask, &context->rmask); - - mask = 2; - for (i = 1; i < 32; i++, mask <<= 1) { - if (umask & mask) - error |= __get_user(regs->regs[i], &context->regs[i]); - } - error |= __get_user(regs->hi, &context->hi); - error |= __get_user(regs->lo, &context->lo); - - error |= __get_user(usedfp, &context->usedfp); - if ((umask & 1) && usedfp) { - fregs = (u64 *) ¤t->thread.fpu; - - for(i = 0; i < 32; i++) - error |= __get_user(fregs[i], &context->fpregs[i]); - error |= __get_user(current->thread.fpu.fcr31, &context->fpcsr); - } - - /* XXX do sigstack crapola here... XXX */ - - error |= __copy_from_user(&blocked, &context->sigset, sizeof(blocked)) ? -EFAULT : 0; - - if (error) - goto badframe; - - sigdelsetmask(&blocked, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = blocked; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - /* - * Don't let your children do this ... - */ - __asm__ __volatile__( - "move\t$29,%0\n\t" - "j\tsyscall_exit" - :/* no outputs */ - :"r" (®s)); - /* Unreached */ - -badframe: - force_sig(SIGSEGV, current); -} - -struct sigact_irix5 { - int flags; - void (*handler)(int); - u32 sigset[4]; - int _unused0[2]; -}; - -#define SIG_SETMASK32 256 /* Goodie from SGI for BSD compatibility: - set only the low 32 bit of the sigset. */ - -#ifdef DEBUG_SIG -static inline void dump_sigact_irix5(struct sigact_irix5 *p) -{ - printk("", p->flags, - (unsigned long) p->handler, - (unsigned long) p->sigset[0]); -} -#endif - -asmlinkage int -irix_sigaction(int sig, const struct sigaction __user *act, - struct sigaction __user *oact, void __user *trampoline) -{ - struct k_sigaction new_ka, old_ka; - int ret; - -#ifdef DEBUG_SIG - printk(" (%d,%s,%s,%08lx) ", sig, (!new ? "0" : "NEW"), - (!old ? "0" : "OLD"), trampoline); - if(new) { - dump_sigact_irix5(new); printk(" "); - } -#endif - if (act) { - sigset_t mask; - int err; - - if (!access_ok(VERIFY_READ, act, sizeof(*act))) - return -EFAULT; - err = __get_user(new_ka.sa.sa_handler, &act->sa_handler); - err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags); - - err |= __copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t)) ? -EFAULT : 0; - if (err) - return err; - - /* - * Hmmm... methinks IRIX libc always passes a valid trampoline - * value for all invocations of sigaction. Will have to - * investigate. POSIX POSIX, die die die... - */ - new_ka.sa_restorer = trampoline; - } - -/* XXX Implement SIG_SETMASK32 for IRIX compatibility */ - ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); - - if (!ret && oact) { - int err; - - if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact))) - return -EFAULT; - - err = __put_user(old_ka.sa.sa_handler, &oact->sa_handler); - err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags); - err |= __copy_to_user(&oact->sa_mask, &old_ka.sa.sa_mask, - sizeof(sigset_t)) ? -EFAULT : 0; - if (err) - return -EFAULT; - } - - return ret; -} - -asmlinkage int irix_sigpending(irix_sigset_t __user *set) -{ - return do_sigpending(set, sizeof(*set)); -} - -asmlinkage int irix_sigprocmask(int how, irix_sigset_t __user *new, - irix_sigset_t __user *old) -{ - sigset_t oldbits, newbits; - - if (new) { - if (!access_ok(VERIFY_READ, new, sizeof(*new))) - return -EFAULT; - if (__copy_from_user(&newbits, new, sizeof(unsigned long)*4)) - return -EFAULT; - sigdelsetmask(&newbits, ~_BLOCKABLE); - - spin_lock_irq(¤t->sighand->siglock); - oldbits = current->blocked; - - switch(how) { - case 1: - sigorsets(&newbits, &oldbits, &newbits); - break; - - case 2: - sigandsets(&newbits, &oldbits, &newbits); - break; - - case 3: - break; - - case 256: - siginitset(&newbits, newbits.sig[0]); - break; - - default: - spin_unlock_irq(¤t->sighand->siglock); - return -EINVAL; - } - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } - if (old) - return copy_to_user(old, ¤t->blocked, - sizeof(unsigned long)*4) ? -EFAULT : 0; - - return 0; -} - -asmlinkage int irix_sigsuspend(struct pt_regs *regs) -{ - sigset_t newset; - sigset_t __user *uset; - - uset = (sigset_t __user *) regs->regs[4]; - if (copy_from_user(&newset, uset, sizeof(sigset_t))) - return -EFAULT; - sigdelsetmask(&newset, ~_BLOCKABLE); - - spin_lock_irq(¤t->sighand->siglock); - current->saved_sigmask = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - current->state = TASK_INTERRUPTIBLE; - schedule(); - set_thread_flag(TIF_RESTORE_SIGMASK); - return -ERESTARTNOHAND; -} - -/* hate hate hate... */ -struct irix5_siginfo { - int sig, code, error; - union { - char unused[128 - (3 * 4)]; /* Safety net. */ - struct { - int pid; - union { - int uid; - struct { - int utime, status, stime; - } child; - } procdata; - } procinfo; - - unsigned long fault_addr; - - struct { - int fd; - long band; - } fileinfo; - - unsigned long sigval; - } stuff; -}; - -asmlinkage int irix_sigpoll_sys(unsigned long __user *set, - struct irix5_siginfo __user *info, struct timespec __user *tp) -{ - long expire = MAX_SCHEDULE_TIMEOUT; - sigset_t kset; - int i, sig, error, timeo = 0; - struct timespec ktp; - -#ifdef DEBUG_SIG - printk("[%s:%d] irix_sigpoll_sys(%p,%p,%p)\n", - current->comm, current->pid, set, info, tp); -#endif - - /* Must always specify the signal set. */ - if (!set) - return -EINVAL; - - if (copy_from_user(&kset, set, sizeof(set))) - return -EFAULT; - - if (info && clear_user(info, sizeof(*info))) { - error = -EFAULT; - goto out; - } - - if (tp) { - if (copy_from_user(&ktp, tp, sizeof(*tp))) - return -EFAULT; - - if (!ktp.tv_sec && !ktp.tv_nsec) - return -EINVAL; - - expire = timespec_to_jiffies(&ktp) + - (ktp.tv_sec || ktp.tv_nsec); - } - - while(1) { - long tmp = 0; - - expire = schedule_timeout_interruptible(expire); - - for (i=0; i < _IRIX_NSIG_WORDS; i++) - tmp |= (current->pending.signal.sig[i] & kset.sig[i]); - - if (tmp) - break; - if (!expire) { - timeo = 1; - break; - } - if (signal_pending(current)) - return -EINTR; - } - if (timeo) - return -EAGAIN; - - for (sig = 1; i <= 65 /* IRIX_NSIG */; sig++) { - if (sigismember (&kset, sig)) - continue; - if (sigismember (¤t->pending.signal, sig)) { - /* XXX need more than this... */ - if (info) - return copy_to_user(&info->sig, &sig, sizeof(sig)); - return 0; - } - } - - /* Should not get here, but do something sane if we do. */ - error = -EINTR; - -out: - return error; -} - -/* This is here because of irix5_siginfo definition. */ -#define IRIX_P_PID 0 -#define IRIX_P_PGID 2 -#define IRIX_P_ALL 7 - -#define W_EXITED 1 -#define W_TRAPPED 2 -#define W_STOPPED 4 -#define W_CONT 8 -#define W_NOHANG 64 - -#define W_MASK (W_EXITED | W_TRAPPED | W_STOPPED | W_CONT | W_NOHANG) - -asmlinkage int irix_waitsys(int type, int upid, - struct irix5_siginfo __user *info, int options, - struct rusage __user *ru) -{ - struct pid *pid = NULL; - int flag, retval; - DECLARE_WAITQUEUE(wait, current); - struct task_struct *tsk; - struct task_struct *p; - struct list_head *_p; - - if (!info) - return -EINVAL; - - if (!access_ok(VERIFY_WRITE, info, sizeof(*info))) - return -EFAULT; - - if (ru) - if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru))) - return -EFAULT; - - if (options & ~W_MASK) - return -EINVAL; - - if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL) - return -EINVAL; - - if (type != IRIX_P_ALL) - pid = find_get_pid(upid); - add_wait_queue(¤t->signal->wait_chldexit, &wait); -repeat: - flag = 0; - current->state = TASK_INTERRUPTIBLE; - read_lock(&tasklist_lock); - tsk = current; - list_for_each(_p, &tsk->children) { - p = list_entry(_p, struct task_struct, sibling); - if ((type == IRIX_P_PID) && task_pid(p) != pid) - continue; - if ((type == IRIX_P_PGID) && task_pgrp(p) != pid) - continue; - if ((p->exit_signal != SIGCHLD)) - continue; - flag = 1; - switch (p->state) { - case TASK_STOPPED: - if (!p->exit_code) - continue; - if (!(options & (W_TRAPPED|W_STOPPED)) && - !(p->ptrace & PT_PTRACED)) - continue; - read_unlock(&tasklist_lock); - - /* move to end of parent's list to avoid starvation */ - write_lock_irq(&tasklist_lock); - remove_parent(p); - add_parent(p); - write_unlock_irq(&tasklist_lock); - retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0; - if (retval) - goto end_waitsys; - - retval = __put_user(SIGCHLD, &info->sig); - retval |= __put_user(0, &info->code); - retval |= __put_user(task_pid_vnr(p), &info->stuff.procinfo.pid); - retval |= __put_user((p->exit_code >> 8) & 0xff, - &info->stuff.procinfo.procdata.child.status); - retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime); - retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime); - if (retval) - goto end_waitsys; - - p->exit_code = 0; - goto end_waitsys; - - case EXIT_ZOMBIE: - current->signal->cutime += p->utime + p->signal->cutime; - current->signal->cstime += p->stime + p->signal->cstime; - if (ru != NULL) - getrusage(p, RUSAGE_BOTH, ru); - retval = __put_user(SIGCHLD, &info->sig); - retval |= __put_user(1, &info->code); /* CLD_EXITED */ - retval |= __put_user(task_pid_vnr(p), &info->stuff.procinfo.pid); - retval |= __put_user((p->exit_code >> 8) & 0xff, - &info->stuff.procinfo.procdata.child.status); - retval |= __put_user(p->utime, - &info->stuff.procinfo.procdata.child.utime); - retval |= __put_user(p->stime, - &info->stuff.procinfo.procdata.child.stime); - if (retval) - goto end_waitsys; - - if (p->real_parent != p->parent) { - write_lock_irq(&tasklist_lock); - remove_parent(p); - p->parent = p->real_parent; - add_parent(p); - do_notify_parent(p, SIGCHLD); - write_unlock_irq(&tasklist_lock); - } else - release_task(p); - goto end_waitsys; - default: - continue; - } - tsk = next_thread(tsk); - } - read_unlock(&tasklist_lock); - if (flag) { - retval = 0; - if (options & W_NOHANG) - goto end_waitsys; - retval = -ERESTARTSYS; - if (signal_pending(current)) - goto end_waitsys; - current->state = TASK_INTERRUPTIBLE; - schedule(); - goto repeat; - } - retval = -ECHILD; -end_waitsys: - current->state = TASK_RUNNING; - remove_wait_queue(¤t->signal->wait_chldexit, &wait); - put_pid(pid); - - return retval; -} - -struct irix5_context { - u32 flags; - u32 link; - u32 sigmask[4]; - struct { u32 sp, size, flags; } stack; - int regs[36]; - u32 fpregs[32]; - u32 fpcsr; - u32 _unused0; - u32 _unused1[47]; - u32 weird_graphics_thing; -}; - -asmlinkage int irix_getcontext(struct pt_regs *regs) -{ - int error, i, base = 0; - struct irix5_context __user *ctx; - unsigned long flags; - - if (regs->regs[2] == 1000) - base = 1; - ctx = (struct irix5_context __user *) regs->regs[base + 4]; - -#ifdef DEBUG_SIG - printk("[%s:%d] irix_getcontext(%p)\n", - current->comm, current->pid, ctx); -#endif - - if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx))) - return -EFAULT; - - error = __put_user(current->thread.irix_oldctx, &ctx->link); - - error |= __copy_to_user(&ctx->sigmask, ¤t->blocked, sizeof(irix_sigset_t)) ? -EFAULT : 0; - - /* XXX Do sigstack stuff someday... */ - error |= __put_user(0, &ctx->stack.sp); - error |= __put_user(0, &ctx->stack.size); - error |= __put_user(0, &ctx->stack.flags); - - error |= __put_user(0, &ctx->weird_graphics_thing); - error |= __put_user(0, &ctx->regs[0]); - for (i = 1; i < 32; i++) - error |= __put_user(regs->regs[i], &ctx->regs[i]); - error |= __put_user(regs->lo, &ctx->regs[32]); - error |= __put_user(regs->hi, &ctx->regs[33]); - error |= __put_user(regs->cp0_cause, &ctx->regs[34]); - error |= __put_user(regs->cp0_epc, &ctx->regs[35]); - - flags = 0x0f; - if (!used_math()) { - flags &= ~(0x08); - } else { - /* XXX wheee... */ - printk("Wheee, no code for saving IRIX FPU context yet.\n"); - } - error |= __put_user(flags, &ctx->flags); - - return error; -} - -asmlinkage void irix_setcontext(struct pt_regs *regs) -{ - struct irix5_context __user *ctx; - int err, base = 0; - u32 flags; - - if (regs->regs[2] == 1000) - base = 1; - ctx = (struct irix5_context __user *) regs->regs[base + 4]; - -#ifdef DEBUG_SIG - printk("[%s:%d] irix_setcontext(%p)\n", - current->comm, current->pid, ctx); -#endif - - if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx))) - goto segv_and_exit; - - err = __get_user(flags, &ctx->flags); - if (flags & 0x02) { - /* XXX sigstack garbage, todo... */ - printk("Wheee, cannot do sigstack stuff in setcontext\n"); - } - - if (flags & 0x04) { - int i; - - /* XXX extra control block stuff... todo... */ - for (i = 1; i < 32; i++) - err |= __get_user(regs->regs[i], &ctx->regs[i]); - err |= __get_user(regs->lo, &ctx->regs[32]); - err |= __get_user(regs->hi, &ctx->regs[33]); - err |= __get_user(regs->cp0_epc, &ctx->regs[35]); - } - - if (flags & 0x08) - /* XXX fpu context, blah... */ - printk(KERN_ERR "Wheee, cannot restore FPU context yet...\n"); - - err |= __get_user(current->thread.irix_oldctx, &ctx->link); - if (err) - goto segv_and_exit; - - /* - * Don't let your children do this ... - */ - __asm__ __volatile__( - "move\t$29,%0\n\t" - "j\tsyscall_exit" - :/* no outputs */ - :"r" (®s)); - /* Unreached */ - -segv_and_exit: - force_sigsegv(SIGSEGV, current); -} - -struct irix_sigstack { - unsigned long sp; - int status; -}; - -asmlinkage int irix_sigstack(struct irix_sigstack __user *new, - struct irix_sigstack __user *old) -{ -#ifdef DEBUG_SIG - printk("[%s:%d] irix_sigstack(%p,%p)\n", - current->comm, current->pid, new, old); -#endif - if (new) { - if (!access_ok(VERIFY_READ, new, sizeof(*new))) - return -EFAULT; - } - - if (old) { - if (!access_ok(VERIFY_WRITE, old, sizeof(*old))) - return -EFAULT; - } - - return 0; -} - -struct irix_sigaltstack { unsigned long sp; int size; int status; }; - -asmlinkage int irix_sigaltstack(struct irix_sigaltstack __user *new, - struct irix_sigaltstack __user *old) -{ -#ifdef DEBUG_SIG - printk("[%s:%d] irix_sigaltstack(%p,%p)\n", - current->comm, current->pid, new, old); -#endif - if (new) - if (!access_ok(VERIFY_READ, new, sizeof(*new))) - return -EFAULT; - - if (old) { - if (!access_ok(VERIFY_WRITE, old, sizeof(*old))) - return -EFAULT; - } - - return 0; -} - -struct irix_procset { - int cmd, ltype, lid, rtype, rid; -}; - -asmlinkage int irix_sigsendset(struct irix_procset __user *pset, int sig) -{ - if (!access_ok(VERIFY_READ, pset, sizeof(*pset))) - return -EFAULT; -#ifdef DEBUG_SIG - printk("[%s:%d] irix_sigsendset([%d,%d,%d,%d,%d],%d)\n", - current->comm, current->pid, - pset->cmd, pset->ltype, pset->lid, pset->rtype, pset->rid, - sig); -#endif - return -EINVAL; -} diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 2c09a442e5e5..c06f5b5d764c 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -125,13 +125,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, *childregs = *regs; childregs->regs[7] = 0; /* Clear error flag */ -#if defined(CONFIG_BINFMT_IRIX) - if (current->personality != PER_LINUX) { - /* Under IRIX things are a little different. */ - childregs->regs[3] = 1; - regs->regs[3] = 0; - } -#endif childregs->regs[2] = 0; /* Child gets zero as return value */ regs->regs[2] = p->pid; diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 08a9c5070ea8..c058c0b61a2a 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -34,12 +34,8 @@ NESTED(handle_sys, PT_SIZE, sp) lw t1, PT_EPC(sp) # skip syscall on return -#if defined(CONFIG_BINFMT_IRIX) - sltiu t0, v0, MAX_SYSCALL_NO + 1 # check syscall number -#else subu v0, v0, __NR_O32_Linux # check syscall number sltiu t0, v0, __NR_O32_Linux_syscalls + 1 -#endif addiu t1, 4 # skip to next instruction sw t1, PT_EPC(sp) beqz t0, illegal_syscall @@ -264,22 +260,14 @@ bad_alignment: END(sys_sysmips) LEAF(sys_syscall) -#if defined(CONFIG_BINFMT_IRIX) - sltiu v0, a0, MAX_SYSCALL_NO + 1 # check syscall number -#else subu t0, a0, __NR_O32_Linux # check syscall number sltiu v0, t0, __NR_O32_Linux_syscalls + 1 -#endif sll t1, t0, 3 beqz v0, einval lw t2, sys_call_table(t1) # syscall routine -#if defined(CONFIG_BINFMT_IRIX) - li v1, 4000 # nr of sys_syscall -#else li v1, 4000 - __NR_O32_Linux # index of sys_syscall -#endif beq t0, v1, einval # do not recurse /* Some syscalls like execve get their arguments from struct pt_regs @@ -324,13 +312,6 @@ einval: li v0, -EINVAL .endm .macro syscalltable -#if defined(CONFIG_BINFMT_IRIX) - mille sys_ni_syscall 0 /* 0 - 999 SVR4 flavour */ - mille sys_ni_syscall 0 /* 1000 - 1999 32-bit IRIX */ - mille sys_ni_syscall 0 /* 2000 - 2999 BSD43 flavour */ - mille sys_ni_syscall 0 /* 3000 - 3999 POSIX flavour */ -#endif - sys sys_syscall 8 /* 4000 */ sys sys_exit 1 sys sys_fork 0 diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c deleted file mode 100644 index c357762b8012..000000000000 --- a/arch/mips/kernel/sysirix.c +++ /dev/null @@ -1,2140 +0,0 @@ -/* - * sysirix.c: IRIX system call emulation. - * - * Copyright (C) 1996 David S. Miller - * Copyright (C) 1997 Miguel de Icaza - * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* 2,191 lines of complete and utter shit coming up... */ - -extern int max_threads; - -/* The sysmp commands supported thus far. */ -#define MP_NPROCS 1 /* # processor in complex */ -#define MP_NAPROCS 2 /* # active processors in complex */ -#define MP_PGSIZE 14 /* Return system page size in v1. */ - -asmlinkage int irix_sysmp(struct pt_regs *regs) -{ - unsigned long cmd; - int base = 0; - int error = 0; - - if(regs->regs[2] == 1000) - base = 1; - cmd = regs->regs[base + 4]; - switch(cmd) { - case MP_PGSIZE: - error = PAGE_SIZE; - break; - case MP_NPROCS: - case MP_NAPROCS: - error = num_online_cpus(); - break; - default: - printk("SYSMP[%s:%d]: Unsupported opcode %d\n", - current->comm, current->pid, (int)cmd); - error = -EINVAL; - break; - } - - return error; -} - -/* The prctl commands. */ -#define PR_MAXPROCS 1 /* Tasks/user. */ -#define PR_ISBLOCKED 2 /* If blocked, return 1. */ -#define PR_SETSTACKSIZE 3 /* Set largest task stack size. */ -#define PR_GETSTACKSIZE 4 /* Get largest task stack size. */ -#define PR_MAXPPROCS 5 /* Num parallel tasks. */ -#define PR_UNBLKONEXEC 6 /* When task exec/exit's, unblock. */ -#define PR_SETEXITSIG 8 /* When task exit's, set signal. */ -#define PR_RESIDENT 9 /* Make task unswappable. */ -#define PR_ATTACHADDR 10 /* (Re-)Connect a vma to a task. */ -#define PR_DETACHADDR 11 /* Disconnect a vma from a task. */ -#define PR_TERMCHILD 12 /* Kill child if the parent dies. */ -#define PR_GETSHMASK 13 /* Get the sproc() share mask. */ -#define PR_GETNSHARE 14 /* Number of share group members. */ -#define PR_COREPID 15 /* Add task pid to name when it core. */ -#define PR_ATTACHADDRPERM 16 /* (Re-)Connect vma, with specified prot. */ -#define PR_PTHREADEXIT 17 /* Kill a pthread, only for IRIX 6.[234] */ - -asmlinkage int irix_prctl(unsigned option, ...) -{ - va_list args; - int error = 0; - - va_start(args, option); - switch (option) { - case PR_MAXPROCS: - printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n", - current->comm, current->pid); - error = max_threads; - break; - - case PR_ISBLOCKED: { - struct task_struct *task; - - printk("irix_prctl[%s:%d]: Wants PR_ISBLOCKED\n", - current->comm, current->pid); - read_lock(&tasklist_lock); - task = find_task_by_vpid(va_arg(args, pid_t)); - error = -ESRCH; - if (error) - error = (task->run_list.next != NULL); - read_unlock(&tasklist_lock); - /* Can _your_ OS find this out that fast? */ - break; - } - - case PR_SETSTACKSIZE: { - long value = va_arg(args, long); - - printk("irix_prctl[%s:%d]: Wants PR_SETSTACKSIZE<%08lx>\n", - current->comm, current->pid, (unsigned long) value); - if (value > RLIM_INFINITY) - value = RLIM_INFINITY; - if (capable(CAP_SYS_ADMIN)) { - task_lock(current->group_leader); - current->signal->rlim[RLIMIT_STACK].rlim_max = - current->signal->rlim[RLIMIT_STACK].rlim_cur = value; - task_unlock(current->group_leader); - error = value; - break; - } - task_lock(current->group_leader); - if (value > current->signal->rlim[RLIMIT_STACK].rlim_max) { - error = -EINVAL; - task_unlock(current->group_leader); - break; - } - current->signal->rlim[RLIMIT_STACK].rlim_cur = value; - task_unlock(current->group_leader); - error = value; - break; - } - - case PR_GETSTACKSIZE: - printk("irix_prctl[%s:%d]: Wants PR_GETSTACKSIZE\n", - current->comm, current->pid); - error = current->signal->rlim[RLIMIT_STACK].rlim_cur; - break; - - case PR_MAXPPROCS: - printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n", - current->comm, current->pid); - error = 1; - break; - - case PR_UNBLKONEXEC: - printk("irix_prctl[%s:%d]: Wants PR_UNBLKONEXEC\n", - current->comm, current->pid); - error = -EINVAL; - break; - - case PR_SETEXITSIG: - printk("irix_prctl[%s:%d]: Wants PR_SETEXITSIG\n", - current->comm, current->pid); - - /* We can probably play some game where we set the task - * exit_code to some non-zero value when this is requested, - * and check whether exit_code is already set in do_exit(). - */ - error = -EINVAL; - break; - - case PR_RESIDENT: - printk("irix_prctl[%s:%d]: Wants PR_RESIDENT\n", - current->comm, current->pid); - error = 0; /* Compatibility indeed. */ - break; - - case PR_ATTACHADDR: - printk("irix_prctl[%s:%d]: Wants PR_ATTACHADDR\n", - current->comm, current->pid); - error = -EINVAL; - break; - - case PR_DETACHADDR: - printk("irix_prctl[%s:%d]: Wants PR_DETACHADDR\n", - current->comm, current->pid); - error = -EINVAL; - break; - - case PR_TERMCHILD: - printk("irix_prctl[%s:%d]: Wants PR_TERMCHILD\n", - current->comm, current->pid); - error = -EINVAL; - break; - - case PR_GETSHMASK: - printk("irix_prctl[%s:%d]: Wants PR_GETSHMASK\n", - current->comm, current->pid); - error = -EINVAL; /* Until I have the sproc() stuff in. */ - break; - - case PR_GETNSHARE: - error = 0; /* Until I have the sproc() stuff in. */ - break; - - case PR_COREPID: - printk("irix_prctl[%s:%d]: Wants PR_COREPID\n", - current->comm, current->pid); - error = -EINVAL; - break; - - case PR_ATTACHADDRPERM: - printk("irix_prctl[%s:%d]: Wants PR_ATTACHADDRPERM\n", - current->comm, current->pid); - error = -EINVAL; - break; - - default: - printk("irix_prctl[%s:%d]: Non-existant opcode %d\n", - current->comm, current->pid, option); - error = -EINVAL; - break; - } - va_end(args); - - return error; -} - -#undef DEBUG_PROCGRPS - -extern unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt); -extern char *prom_getenv(char *name); -extern long prom_setenv(char *name, char *value); - -/* The syssgi commands supported thus far. */ -#define SGI_SYSID 1 /* Return unique per-machine identifier. */ -#define SGI_INVENT 5 /* Fetch inventory */ -# define SGI_INV_SIZEOF 1 -# define SGI_INV_READ 2 -#define SGI_RDNAME 6 /* Return string name of a process. */ -#define SGI_SETNVRAM 8 /* Set PROM variable. */ -#define SGI_GETNVRAM 9 /* Get PROM variable. */ -#define SGI_SETPGID 21 /* Set process group id. */ -#define SGI_SYSCONF 22 /* POSIX sysconf garbage. */ -#define SGI_PATHCONF 24 /* POSIX sysconf garbage. */ -#define SGI_SETGROUPS 40 /* POSIX sysconf garbage. */ -#define SGI_GETGROUPS 41 /* POSIX sysconf garbage. */ -#define SGI_RUSAGE 56 /* BSD style rusage(). */ -#define SGI_SSYNC 62 /* Synchronous fs sync. */ -#define SGI_GETSID 65 /* SysVr4 get session id. */ -#define SGI_ELFMAP 68 /* Map an elf image. */ -#define SGI_TOSSTSAVE 108 /* Toss saved vma's. */ -#define SGI_FP_BCOPY 129 /* Should FPU bcopy be used on this machine? */ -#define SGI_PHYSP 1011 /* Translate virtual into physical page. */ - -asmlinkage int irix_syssgi(struct pt_regs *regs) -{ - unsigned long cmd; - int retval, base = 0; - - if (regs->regs[2] == 1000) - base = 1; - - cmd = regs->regs[base + 4]; - switch(cmd) { - case SGI_SYSID: { - char __user *buf = (char __user *) regs->regs[base + 5]; - - /* XXX Use ethernet addr.... */ - retval = clear_user(buf, 64) ? -EFAULT : 0; - break; - } -#if 0 - case SGI_RDNAME: { - int pid = (int) regs->regs[base + 5]; - char __user *buf = (char __user *) regs->regs[base + 6]; - struct task_struct *p; - char tcomm[sizeof(current->comm)]; - - read_lock(&tasklist_lock); - p = find_task_by_pid(pid); - if (!p) { - read_unlock(&tasklist_lock); - retval = -ESRCH; - break; - } - get_task_comm(tcomm, p); - read_unlock(&tasklist_lock); - - /* XXX Need to check sizes. */ - retval = copy_to_user(buf, tcomm, sizeof(tcomm)) ? -EFAULT : 0; - break; - } - - case SGI_GETNVRAM: { - char __user *name = (char __user *) regs->regs[base+5]; - char __user *buf = (char __user *) regs->regs[base+6]; - char *value; - return -EINVAL; /* til I fix it */ - value = prom_getenv(name); /* PROM lock? */ - if (!value) { - retval = -EINVAL; - break; - } - /* Do I strlen() for the length? */ - retval = copy_to_user(buf, value, 128) ? -EFAULT : 0; - break; - } - - case SGI_SETNVRAM: { - char __user *name = (char __user *) regs->regs[base+5]; - char __user *value = (char __user *) regs->regs[base+6]; - return -EINVAL; /* til I fix it */ - retval = prom_setenv(name, value); - /* XXX make sure retval conforms to syssgi(2) */ - printk("[%s:%d] setnvram(\"%s\", \"%s\"): retval %d", - current->comm, current->pid, name, value, retval); -/* if (retval == PROM_ENOENT) - retval = -ENOENT; */ - break; - } -#endif - - case SGI_SETPGID: { -#ifdef DEBUG_PROCGRPS - printk("[%s:%d] setpgid(%d, %d) ", - current->comm, current->pid, - (int) regs->regs[base + 5], (int)regs->regs[base + 6]); -#endif - retval = sys_setpgid(regs->regs[base + 5], regs->regs[base + 6]); - -#ifdef DEBUG_PROCGRPS - printk("retval=%d\n", retval); -#endif - } - - case SGI_SYSCONF: { - switch(regs->regs[base + 5]) { - case 1: - retval = (MAX_ARG_PAGES >> 4); /* XXX estimate... */ - goto out; - case 2: - retval = max_threads; - goto out; - case 3: - retval = HZ; - goto out; - case 4: - retval = NGROUPS_MAX; - goto out; - case 5: - retval = sysctl_nr_open; - goto out; - case 6: - retval = 1; - goto out; - case 7: - retval = 1; - goto out; - case 8: - retval = 199009; - goto out; - case 11: - retval = PAGE_SIZE; - goto out; - case 12: - retval = 4; - goto out; - case 25: - case 26: - case 27: - case 28: - case 29: - case 30: - retval = 0; - goto out; - case 31: - retval = 32; - goto out; - default: - retval = -EINVAL; - goto out; - }; - } - - case SGI_SETGROUPS: - retval = sys_setgroups((int) regs->regs[base + 5], - (gid_t __user *) regs->regs[base + 6]); - break; - - case SGI_GETGROUPS: - retval = sys_getgroups((int) regs->regs[base + 5], - (gid_t __user *) regs->regs[base + 6]); - break; - - case SGI_RUSAGE: { - struct rusage __user *ru = (struct rusage __user *) regs->regs[base + 6]; - - switch((int) regs->regs[base + 5]) { - case 0: - /* rusage self */ - retval = getrusage(current, RUSAGE_SELF, ru); - goto out; - - case -1: - /* rusage children */ - retval = getrusage(current, RUSAGE_CHILDREN, ru); - goto out; - - default: - retval = -EINVAL; - goto out; - }; - } - - case SGI_SSYNC: - sys_sync(); - retval = 0; - break; - - case SGI_GETSID: -#ifdef DEBUG_PROCGRPS - printk("[%s:%d] getsid(%d) ", current->comm, current->pid, - (int) regs->regs[base + 5]); -#endif - retval = sys_getsid(regs->regs[base + 5]); -#ifdef DEBUG_PROCGRPS - printk("retval=%d\n", retval); -#endif - break; - - case SGI_ELFMAP: - retval = irix_mapelf((int) regs->regs[base + 5], - (struct elf_phdr __user *) regs->regs[base + 6], - (int) regs->regs[base + 7]); - break; - - case SGI_TOSSTSAVE: - /* XXX We don't need to do anything? */ - retval = 0; - break; - - case SGI_FP_BCOPY: - retval = 0; - break; - - case SGI_PHYSP: { - unsigned long addr = regs->regs[base + 5]; - int __user *pageno = (int __user *) (regs->regs[base + 6]); - struct mm_struct *mm = current->mm; - pgd_t *pgdp; - pud_t *pudp; - pmd_t *pmdp; - pte_t *ptep; - - down_read(&mm->mmap_sem); - pgdp = pgd_offset(mm, addr); - pudp = pud_offset(pgdp, addr); - pmdp = pmd_offset(pudp, addr); - ptep = pte_offset(pmdp, addr); - retval = -EINVAL; - if (ptep) { - pte_t pte = *ptep; - - if (pte_val(pte) & (_PAGE_VALID | _PAGE_PRESENT)) { - /* b0rked on 64-bit */ - retval = put_user((pte_val(pte) & PAGE_MASK) >> - PAGE_SHIFT, pageno); - } - } - up_read(&mm->mmap_sem); - break; - } - - case SGI_INVENT: { - int arg1 = (int) regs->regs [base + 5]; - void __user *buffer = (void __user *) regs->regs [base + 6]; - int count = (int) regs->regs [base + 7]; - - switch (arg1) { - case SGI_INV_SIZEOF: - retval = sizeof(inventory_t); - break; - case SGI_INV_READ: - retval = dump_inventory_to_user(buffer, count); - break; - default: - retval = -EINVAL; - } - break; - } - - default: - printk("irix_syssgi: Unsupported command %d\n", (int)cmd); - retval = -EINVAL; - break; - }; - -out: - return retval; -} - -asmlinkage int irix_gtime(struct pt_regs *regs) -{ - return get_seconds(); -} - -/* - * IRIX is completely broken... it returns 0 on success, otherwise - * ENOMEM. - */ -asmlinkage int irix_brk(unsigned long brk) -{ - unsigned long rlim; - unsigned long newbrk, oldbrk; - struct mm_struct *mm = current->mm; - int ret; - - down_write(&mm->mmap_sem); - if (brk < mm->end_code) { - ret = -ENOMEM; - goto out; - } - - newbrk = PAGE_ALIGN(brk); - oldbrk = PAGE_ALIGN(mm->brk); - if (oldbrk == newbrk) { - mm->brk = brk; - ret = 0; - goto out; - } - - /* - * Always allow shrinking brk - */ - if (brk <= mm->brk) { - mm->brk = brk; - do_munmap(mm, newbrk, oldbrk-newbrk); - ret = 0; - goto out; - } - /* - * Check against rlimit and stack.. - */ - rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur; - if (rlim >= RLIM_INFINITY) - rlim = ~0; - if (brk - mm->end_code > rlim) { - ret = -ENOMEM; - goto out; - } - - /* - * Check against existing mmap mappings. - */ - if (find_vma_intersection(mm, oldbrk, newbrk+PAGE_SIZE)) { - ret = -ENOMEM; - goto out; - } - - /* - * Ok, looks good - let it rip. - */ - if (do_brk(oldbrk, newbrk-oldbrk) != oldbrk) { - ret = -ENOMEM; - goto out; - } - mm->brk = brk; - ret = 0; - -out: - up_write(&mm->mmap_sem); - return ret; -} - -asmlinkage int irix_getpid(struct pt_regs *regs) -{ - regs->regs[3] = task_pid_vnr(current->real_parent); - return task_pid_vnr(current); -} - -asmlinkage int irix_getuid(struct pt_regs *regs) -{ - regs->regs[3] = current->euid; - return current->uid; -} - -asmlinkage int irix_getgid(struct pt_regs *regs) -{ - regs->regs[3] = current->egid; - return current->gid; -} - -asmlinkage int irix_stime(int value) -{ - int err; - struct timespec tv; - - tv.tv_sec = value; - tv.tv_nsec = 0; - err = security_settime(&tv, NULL); - if (err) - return err; - - write_seqlock_irq(&xtime_lock); - xtime.tv_sec = value; - xtime.tv_nsec = 0; - ntp_clear(); - write_sequnlock_irq(&xtime_lock); - - return 0; -} - -static inline void jiffiestotv(unsigned long jiffies, struct timeval *value) -{ - value->tv_usec = (jiffies % HZ) * (1000000 / HZ); - value->tv_sec = jiffies / HZ; -} - -static inline void getitimer_real(struct itimerval *value) -{ - register unsigned long val, interval; - - interval = current->it_real_incr; - val = 0; - if (del_timer(¤t->real_timer)) { - unsigned long now = jiffies; - val = current->real_timer.expires; - add_timer(¤t->real_timer); - /* look out for negative/zero itimer.. */ - if (val <= now) - val = now+1; - val -= now; - } - jiffiestotv(val, &value->it_value); - jiffiestotv(interval, &value->it_interval); -} - -asmlinkage unsigned int irix_alarm(unsigned int seconds) -{ - return alarm_setitimer(seconds); -} - -asmlinkage int irix_pause(void) -{ - current->state = TASK_INTERRUPTIBLE; - schedule(); - - return -EINTR; -} - -/* XXX need more than this... */ -asmlinkage int irix_mount(char __user *dev_name, char __user *dir_name, - unsigned long flags, char __user *type, void __user *data, int datalen) -{ - printk("[%s:%d] irix_mount(%p,%p,%08lx,%p,%p,%d)\n", - current->comm, current->pid, - dev_name, dir_name, flags, type, data, datalen); - - return sys_mount(dev_name, dir_name, type, flags, data); -} - -struct irix_statfs { - short f_type; - long f_bsize, f_frsize, f_blocks, f_bfree, f_files, f_ffree; - char f_fname[6], f_fpack[6]; -}; - -asmlinkage int irix_statfs(const char __user *path, - struct irix_statfs __user *buf, int len, int fs_type) -{ - struct nameidata nd; - struct kstatfs kbuf; - int error, i; - - /* We don't support this feature yet. */ - if (fs_type) { - error = -EINVAL; - goto out; - } - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statfs))) { - error = -EFAULT; - goto out; - } - - error = user_path_walk(path, &nd); - if (error) - goto out; - - error = vfs_statfs(nd.path.dentry, &kbuf); - if (error) - goto dput_and_out; - - error = __put_user(kbuf.f_type, &buf->f_type); - error |= __put_user(kbuf.f_bsize, &buf->f_bsize); - error |= __put_user(kbuf.f_frsize, &buf->f_frsize); - error |= __put_user(kbuf.f_blocks, &buf->f_blocks); - error |= __put_user(kbuf.f_bfree, &buf->f_bfree); - error |= __put_user(kbuf.f_files, &buf->f_files); - error |= __put_user(kbuf.f_ffree, &buf->f_ffree); - for (i = 0; i < 6; i++) { - error |= __put_user(0, &buf->f_fname[i]); - error |= __put_user(0, &buf->f_fpack[i]); - } - -dput_and_out: - path_put(&nd.path); -out: - return error; -} - -asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs __user *buf) -{ - struct kstatfs kbuf; - struct file *file; - int error, i; - - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statfs))) { - error = -EFAULT; - goto out; - } - - if (!(file = fget(fd))) { - error = -EBADF; - goto out; - } - - error = vfs_statfs(file->f_path.dentry, &kbuf); - if (error) - goto out_f; - - error = __put_user(kbuf.f_type, &buf->f_type); - error |= __put_user(kbuf.f_bsize, &buf->f_bsize); - error |= __put_user(kbuf.f_frsize, &buf->f_frsize); - error |= __put_user(kbuf.f_blocks, &buf->f_blocks); - error |= __put_user(kbuf.f_bfree, &buf->f_bfree); - error |= __put_user(kbuf.f_files, &buf->f_files); - error |= __put_user(kbuf.f_ffree, &buf->f_ffree); - - for (i = 0; i < 6; i++) { - error |= __put_user(0, &buf->f_fname[i]); - error |= __put_user(0, &buf->f_fpack[i]); - } - -out_f: - fput(file); -out: - return error; -} - -asmlinkage int irix_setpgrp(int flags) -{ - int error; - -#ifdef DEBUG_PROCGRPS - printk("[%s:%d] setpgrp(%d) ", current->comm, current->pid, flags); -#endif - if(!flags) - error = task_pgrp_vnr(current); - else - error = sys_setsid(); -#ifdef DEBUG_PROCGRPS - printk("returning %d\n", error); -#endif - - return error; -} - -asmlinkage int irix_times(struct tms __user *tbuf) -{ - int err = 0; - - if (tbuf) { - if (!access_ok(VERIFY_WRITE, tbuf, sizeof *tbuf)) - return -EFAULT; - - err = __put_user(current->utime, &tbuf->tms_utime); - err |= __put_user(current->stime, &tbuf->tms_stime); - err |= __put_user(current->signal->cutime, &tbuf->tms_cutime); - err |= __put_user(current->signal->cstime, &tbuf->tms_cstime); - } - - return err; -} - -asmlinkage int irix_exec(struct pt_regs *regs) -{ - int error, base = 0; - char *filename; - - if(regs->regs[2] == 1000) - base = 1; - filename = getname((char __user *) (long)regs->regs[base + 4]); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - return error; - - error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5], - NULL, regs); - putname(filename); - - return error; -} - -asmlinkage int irix_exece(struct pt_regs *regs) -{ - int error, base = 0; - char *filename; - - if (regs->regs[2] == 1000) - base = 1; - filename = getname((char __user *) (long)regs->regs[base + 4]); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - return error; - error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5], - (char __user * __user *) (long)regs->regs[base + 6], regs); - putname(filename); - - return error; -} - -asmlinkage unsigned long irix_gethostid(void) -{ - printk("[%s:%d]: irix_gethostid() called...\n", - current->comm, current->pid); - - return -EINVAL; -} - -asmlinkage unsigned long irix_sethostid(unsigned long val) -{ - printk("[%s:%d]: irix_sethostid(%08lx) called...\n", - current->comm, current->pid, val); - - return -EINVAL; -} - -asmlinkage int irix_socket(int family, int type, int protocol) -{ - switch(type) { - case 1: - type = SOCK_DGRAM; - break; - - case 2: - type = SOCK_STREAM; - break; - - case 3: - type = 9; /* Invalid... */ - break; - - case 4: - type = SOCK_RAW; - break; - - case 5: - type = SOCK_RDM; - break; - - case 6: - type = SOCK_SEQPACKET; - break; - - default: - break; - } - - return sys_socket(family, type, protocol); -} - -asmlinkage int irix_getdomainname(char __user *name, int len) -{ - int err; - - down_read(&uts_sem); - if (len > __NEW_UTS_LEN) - len = __NEW_UTS_LEN; - err = copy_to_user(name, utsname()->domainname, len) ? -EFAULT : 0; - up_read(&uts_sem); - - return err; -} - -asmlinkage unsigned long irix_getpagesize(void) -{ - return PAGE_SIZE; -} - -asmlinkage int irix_msgsys(int opcode, unsigned long arg0, unsigned long arg1, - unsigned long arg2, unsigned long arg3, - unsigned long arg4) -{ - switch (opcode) { - case 0: - return sys_msgget((key_t) arg0, (int) arg1); - case 1: - return sys_msgctl((int) arg0, (int) arg1, - (struct msqid_ds __user *)arg2); - case 2: - return sys_msgrcv((int) arg0, (struct msgbuf __user *) arg1, - (size_t) arg2, (long) arg3, (int) arg4); - case 3: - return sys_msgsnd((int) arg0, (struct msgbuf __user *) arg1, - (size_t) arg2, (int) arg3); - default: - return -EINVAL; - } -} - -asmlinkage int irix_shmsys(int opcode, unsigned long arg0, unsigned long arg1, - unsigned long arg2, unsigned long arg3) -{ - switch (opcode) { - case 0: - return do_shmat((int) arg0, (char __user *) arg1, (int) arg2, - (unsigned long *) arg3); - case 1: - return sys_shmctl((int)arg0, (int)arg1, - (struct shmid_ds __user *)arg2); - case 2: - return sys_shmdt((char __user *)arg0); - case 3: - return sys_shmget((key_t) arg0, (int) arg1, (int) arg2); - default: - return -EINVAL; - } -} - -asmlinkage int irix_semsys(int opcode, unsigned long arg0, unsigned long arg1, - unsigned long arg2, int arg3) -{ - switch (opcode) { - case 0: - return sys_semctl((int) arg0, (int) arg1, (int) arg2, - (union semun) arg3); - case 1: - return sys_semget((key_t) arg0, (int) arg1, (int) arg2); - case 2: - return sys_semop((int) arg0, (struct sembuf __user *)arg1, - (unsigned int) arg2); - default: - return -EINVAL; - } -} - -static inline loff_t llseek(struct file *file, loff_t offset, int origin) -{ - loff_t (*fn)(struct file *, loff_t, int); - loff_t retval; - - fn = default_llseek; - if (file->f_op && file->f_op->llseek) - fn = file->f_op->llseek; - lock_kernel(); - retval = fn(file, offset, origin); - unlock_kernel(); - - return retval; -} - -asmlinkage int irix_lseek64(int fd, int _unused, int offhi, int offlow, - int origin) -{ - struct file * file; - loff_t offset; - int retval; - - retval = -EBADF; - file = fget(fd); - if (!file) - goto bad; - retval = -EINVAL; - if (origin > 2) - goto out_putf; - - offset = llseek(file, ((loff_t) offhi << 32) | offlow, origin); - retval = (int) offset; - -out_putf: - fput(file); -bad: - return retval; -} - -asmlinkage int irix_sginap(int ticks) -{ - schedule_timeout_interruptible(ticks); - return 0; -} - -asmlinkage int irix_sgikopt(char __user *istring, char __user *ostring, int len) -{ - return -EINVAL; -} - -asmlinkage int irix_gettimeofday(struct timeval __user *tv) -{ - time_t sec; - long nsec, seq; - int err; - - if (!access_ok(VERIFY_WRITE, tv, sizeof(struct timeval))) - return -EFAULT; - - do { - seq = read_seqbegin(&xtime_lock); - sec = xtime.tv_sec; - nsec = xtime.tv_nsec; - } while (read_seqretry(&xtime_lock, seq)); - - err = __put_user(sec, &tv->tv_sec); - err |= __put_user((nsec / 1000), &tv->tv_usec); - - return err; -} - -#define IRIX_MAP_AUTOGROW 0x40 - -asmlinkage unsigned long irix_mmap32(unsigned long addr, size_t len, int prot, - int flags, int fd, off_t offset) -{ - struct file *file = NULL; - unsigned long retval; - - if (!(flags & MAP_ANONYMOUS)) { - if (!(file = fget(fd))) - return -EBADF; - - /* Ok, bad taste hack follows, try to think in something else - * when reading this. */ - if (flags & IRIX_MAP_AUTOGROW) { - unsigned long old_pos; - long max_size = offset + len; - - if (max_size > file->f_path.dentry->d_inode->i_size) { - old_pos = sys_lseek(fd, max_size - 1, 0); - sys_write(fd, (void __user *) "", 1); - sys_lseek(fd, old_pos, 0); - } - } - } - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - retval = do_mmap(file, addr, len, prot, flags, offset); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); - - return retval; -} - -asmlinkage int irix_madvise(unsigned long addr, int len, int behavior) -{ - printk("[%s:%d] Wheee.. irix_madvise(%08lx,%d,%d)\n", - current->comm, current->pid, addr, len, behavior); - - return -EINVAL; -} - -asmlinkage int irix_pagelock(char __user *addr, int len, int op) -{ - printk("[%s:%d] Wheee.. irix_pagelock(%p,%d,%d)\n", - current->comm, current->pid, addr, len, op); - - return -EINVAL; -} - -asmlinkage int irix_quotactl(struct pt_regs *regs) -{ - printk("[%s:%d] Wheee.. irix_quotactl()\n", - current->comm, current->pid); - - return -EINVAL; -} - -asmlinkage int irix_BSDsetpgrp(int pid, int pgrp) -{ - int error; - -#ifdef DEBUG_PROCGRPS - printk("[%s:%d] BSDsetpgrp(%d, %d) ", current->comm, current->pid, - pid, pgrp); -#endif - if(!pid) - pid = task_pid_vnr(current); - - /* Wheee, weird sysv thing... */ - if ((pgrp == 0) && (pid == task_pid_vnr(current))) - error = sys_setsid(); - else - error = sys_setpgid(pid, pgrp); - -#ifdef DEBUG_PROCGRPS - printk("error = %d\n", error); -#endif - - return error; -} - -asmlinkage int irix_systeminfo(int cmd, char __user *buf, int cnt) -{ - printk("[%s:%d] Wheee.. irix_systeminfo(%d,%p,%d)\n", - current->comm, current->pid, cmd, buf, cnt); - - return -EINVAL; -} - -struct iuname { - char sysname[257], nodename[257], release[257]; - char version[257], machine[257]; - char m_type[257], base_rel[257]; - char _unused0[257], _unused1[257], _unused2[257]; - char _unused3[257], _unused4[257], _unused5[257]; -}; - -asmlinkage int irix_uname(struct iuname __user *buf) -{ - down_read(&uts_sem); - if (copy_from_user(utsname()->sysname, buf->sysname, 65) - || copy_from_user(utsname()->nodename, buf->nodename, 65) - || copy_from_user(utsname()->release, buf->release, 65) - || copy_from_user(utsname()->version, buf->version, 65) - || copy_from_user(utsname()->machine, buf->machine, 65)) { - return -EFAULT; - } - up_read(&uts_sem); - - return 1; -} - -#undef DEBUG_XSTAT - -static int irix_xstat32_xlate(struct kstat *stat, void __user *ubuf) -{ - struct xstat32 { - u32 st_dev, st_pad1[3], st_ino, st_mode, st_nlink, st_uid, st_gid; - u32 st_rdev, st_pad2[2], st_size, st_pad3; - u32 st_atime0, st_atime1; - u32 st_mtime0, st_mtime1; - u32 st_ctime0, st_ctime1; - u32 st_blksize, st_blocks; - char st_fstype[16]; - u32 st_pad4[8]; - } ub; - - if (!sysv_valid_dev(stat->dev) || !sysv_valid_dev(stat->rdev)) - return -EOVERFLOW; - ub.st_dev = sysv_encode_dev(stat->dev); - ub.st_ino = stat->ino; - ub.st_mode = stat->mode; - ub.st_nlink = stat->nlink; - SET_UID(ub.st_uid, stat->uid); - SET_GID(ub.st_gid, stat->gid); - ub.st_rdev = sysv_encode_dev(stat->rdev); -#if BITS_PER_LONG == 32 - if (stat->size > MAX_NON_LFS) - return -EOVERFLOW; -#endif - ub.st_size = stat->size; - ub.st_atime0 = stat->atime.tv_sec; - ub.st_atime1 = stat->atime.tv_nsec; - ub.st_mtime0 = stat->mtime.tv_sec; - ub.st_mtime1 = stat->atime.tv_nsec; - ub.st_ctime0 = stat->ctime.tv_sec; - ub.st_ctime1 = stat->atime.tv_nsec; - ub.st_blksize = stat->blksize; - ub.st_blocks = stat->blocks; - strcpy(ub.st_fstype, "efs"); - - return copy_to_user(ubuf, &ub, sizeof(ub)) ? -EFAULT : 0; -} - -static int irix_xstat64_xlate(struct kstat *stat, void __user *ubuf) -{ - struct xstat64 { - u32 st_dev; s32 st_pad1[3]; - unsigned long long st_ino; - u32 st_mode; - u32 st_nlink; s32 st_uid; s32 st_gid; u32 st_rdev; - s32 st_pad2[2]; - long long st_size; - s32 st_pad3; - struct { s32 tv_sec, tv_nsec; } st_atime, st_mtime, st_ctime; - s32 st_blksize; - long long st_blocks; - char st_fstype[16]; - s32 st_pad4[8]; - } ks; - - if (!sysv_valid_dev(stat->dev) || !sysv_valid_dev(stat->rdev)) - return -EOVERFLOW; - - ks.st_dev = sysv_encode_dev(stat->dev); - ks.st_pad1[0] = ks.st_pad1[1] = ks.st_pad1[2] = 0; - ks.st_ino = (unsigned long long) stat->ino; - ks.st_mode = (u32) stat->mode; - ks.st_nlink = (u32) stat->nlink; - ks.st_uid = (s32) stat->uid; - ks.st_gid = (s32) stat->gid; - ks.st_rdev = sysv_encode_dev(stat->rdev); - ks.st_pad2[0] = ks.st_pad2[1] = 0; - ks.st_size = (long long) stat->size; - ks.st_pad3 = 0; - - /* XXX hackety hack... */ - ks.st_atime.tv_sec = (s32) stat->atime.tv_sec; - ks.st_atime.tv_nsec = stat->atime.tv_nsec; - ks.st_mtime.tv_sec = (s32) stat->mtime.tv_sec; - ks.st_mtime.tv_nsec = stat->mtime.tv_nsec; - ks.st_ctime.tv_sec = (s32) stat->ctime.tv_sec; - ks.st_ctime.tv_nsec = stat->ctime.tv_nsec; - - ks.st_blksize = (s32) stat->blksize; - ks.st_blocks = (long long) stat->blocks; - memset(ks.st_fstype, 0, 16); - ks.st_pad4[0] = ks.st_pad4[1] = ks.st_pad4[2] = ks.st_pad4[3] = 0; - ks.st_pad4[4] = ks.st_pad4[5] = ks.st_pad4[6] = ks.st_pad4[7] = 0; - - /* Now write it all back. */ - return copy_to_user(ubuf, &ks, sizeof(ks)) ? -EFAULT : 0; -} - -asmlinkage int irix_xstat(int version, char __user *filename, struct stat __user *statbuf) -{ - int retval; - struct kstat stat; - -#ifdef DEBUG_XSTAT - printk("[%s:%d] Wheee.. irix_xstat(%d,%s,%p) ", - current->comm, current->pid, version, filename, statbuf); -#endif - - retval = vfs_stat(filename, &stat); - if (!retval) { - switch(version) { - case 2: - retval = irix_xstat32_xlate(&stat, statbuf); - break; - case 3: - retval = irix_xstat64_xlate(&stat, statbuf); - break; - default: - retval = -EINVAL; - } - } - return retval; -} - -asmlinkage int irix_lxstat(int version, char __user *filename, struct stat __user *statbuf) -{ - int error; - struct kstat stat; - -#ifdef DEBUG_XSTAT - printk("[%s:%d] Wheee.. irix_lxstat(%d,%s,%p) ", - current->comm, current->pid, version, filename, statbuf); -#endif - - error = vfs_lstat(filename, &stat); - - if (!error) { - switch (version) { - case 2: - error = irix_xstat32_xlate(&stat, statbuf); - break; - case 3: - error = irix_xstat64_xlate(&stat, statbuf); - break; - default: - error = -EINVAL; - } - } - return error; -} - -asmlinkage int irix_fxstat(int version, int fd, struct stat __user *statbuf) -{ - int error; - struct kstat stat; - -#ifdef DEBUG_XSTAT - printk("[%s:%d] Wheee.. irix_fxstat(%d,%d,%p) ", - current->comm, current->pid, version, fd, statbuf); -#endif - - error = vfs_fstat(fd, &stat); - if (!error) { - switch (version) { - case 2: - error = irix_xstat32_xlate(&stat, statbuf); - break; - case 3: - error = irix_xstat64_xlate(&stat, statbuf); - break; - default: - error = -EINVAL; - } - } - return error; -} - -asmlinkage int irix_xmknod(int ver, char __user *filename, int mode, unsigned dev) -{ - int retval; - printk("[%s:%d] Wheee.. irix_xmknod(%d,%s,%x,%x)\n", - current->comm, current->pid, ver, filename, mode, dev); - - switch(ver) { - case 2: - /* shouldn't we convert here as well as on stat()? */ - retval = sys_mknod(filename, mode, dev); - break; - - default: - retval = -EINVAL; - break; - }; - - return retval; -} - -asmlinkage int irix_swapctl(int cmd, char __user *arg) -{ - printk("[%s:%d] Wheee.. irix_swapctl(%d,%p)\n", - current->comm, current->pid, cmd, arg); - - return -EINVAL; -} - -struct irix_statvfs { - u32 f_bsize; u32 f_frsize; u32 f_blocks; - u32 f_bfree; u32 f_bavail; u32 f_files; u32 f_ffree; u32 f_favail; - u32 f_fsid; char f_basetype[16]; - u32 f_flag; u32 f_namemax; - char f_fstr[32]; u32 f_filler[16]; -}; - -asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf) -{ - struct nameidata nd; - struct kstatfs kbuf; - int error, i; - - printk("[%s:%d] Wheee.. irix_statvfs(%s,%p)\n", - current->comm, current->pid, fname, buf); - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) - return -EFAULT; - - error = user_path_walk(fname, &nd); - if (error) - goto out; - error = vfs_statfs(nd.path.dentry, &kbuf); - if (error) - goto dput_and_out; - - error |= __put_user(kbuf.f_bsize, &buf->f_bsize); - error |= __put_user(kbuf.f_frsize, &buf->f_frsize); - error |= __put_user(kbuf.f_blocks, &buf->f_blocks); - error |= __put_user(kbuf.f_bfree, &buf->f_bfree); - error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ - error |= __put_user(kbuf.f_files, &buf->f_files); - error |= __put_user(kbuf.f_ffree, &buf->f_ffree); - error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ -#ifdef __MIPSEB__ - error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); -#else - error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); -#endif - for (i = 0; i < 16; i++) - error |= __put_user(0, &buf->f_basetype[i]); - error |= __put_user(0, &buf->f_flag); - error |= __put_user(kbuf.f_namelen, &buf->f_namemax); - for (i = 0; i < 32; i++) - error |= __put_user(0, &buf->f_fstr[i]); - -dput_and_out: - path_put(&nd.path); -out: - return error; -} - -asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs __user *buf) -{ - struct kstatfs kbuf; - struct file *file; - int error, i; - - printk("[%s:%d] Wheee.. irix_fstatvfs(%d,%p)\n", - current->comm, current->pid, fd, buf); - - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) - return -EFAULT; - - if (!(file = fget(fd))) { - error = -EBADF; - goto out; - } - error = vfs_statfs(file->f_path.dentry, &kbuf); - if (error) - goto out_f; - - error = __put_user(kbuf.f_bsize, &buf->f_bsize); - error |= __put_user(kbuf.f_frsize, &buf->f_frsize); - error |= __put_user(kbuf.f_blocks, &buf->f_blocks); - error |= __put_user(kbuf.f_bfree, &buf->f_bfree); - error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ - error |= __put_user(kbuf.f_files, &buf->f_files); - error |= __put_user(kbuf.f_ffree, &buf->f_ffree); - error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ -#ifdef __MIPSEB__ - error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); -#else - error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); -#endif - for(i = 0; i < 16; i++) - error |= __put_user(0, &buf->f_basetype[i]); - error |= __put_user(0, &buf->f_flag); - error |= __put_user(kbuf.f_namelen, &buf->f_namemax); - error |= __clear_user(&buf->f_fstr, sizeof(buf->f_fstr)) ? -EFAULT : 0; - -out_f: - fput(file); -out: - return error; -} - -asmlinkage int irix_priocntl(struct pt_regs *regs) -{ - printk("[%s:%d] Wheee.. irix_priocntl()\n", - current->comm, current->pid); - - return -EINVAL; -} - -asmlinkage int irix_sigqueue(int pid, int sig, int code, int val) -{ - printk("[%s:%d] Wheee.. irix_sigqueue(%d,%d,%d,%d)\n", - current->comm, current->pid, pid, sig, code, val); - - return -EINVAL; -} - -asmlinkage int irix_truncate64(char __user *name, int pad, int size1, int size2) -{ - int retval; - - if (size1) { - retval = -EINVAL; - goto out; - } - retval = sys_truncate(name, size2); - -out: - return retval; -} - -asmlinkage int irix_ftruncate64(int fd, int pad, int size1, int size2) -{ - int retval; - - if (size1) { - retval = -EINVAL; - goto out; - } - retval = sys_ftruncate(fd, size2); - -out: - return retval; -} - -asmlinkage int irix_mmap64(struct pt_regs *regs) -{ - int len, prot, flags, fd, off1, off2, error, base = 0; - unsigned long addr, pgoff, *sp; - struct file *file = NULL; - int err; - - if (regs->regs[2] == 1000) - base = 1; - sp = (unsigned long *) (regs->regs[29] + 16); - addr = regs->regs[base + 4]; - len = regs->regs[base + 5]; - prot = regs->regs[base + 6]; - if (!base) { - flags = regs->regs[base + 7]; - if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long)))) - return -EFAULT; - fd = sp[0]; - err = __get_user(off1, &sp[1]); - err |= __get_user(off2, &sp[2]); - } else { - if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long)))) - return -EFAULT; - err = __get_user(flags, &sp[0]); - err |= __get_user(fd, &sp[1]); - err |= __get_user(off1, &sp[2]); - err |= __get_user(off2, &sp[3]); - } - - if (err) - return err; - - if (off1 & PAGE_MASK) - return -EOVERFLOW; - - pgoff = (off1 << (32 - PAGE_SHIFT)) | (off2 >> PAGE_SHIFT); - - if (!(flags & MAP_ANONYMOUS)) { - if (!(file = fget(fd))) - return -EBADF; - - /* Ok, bad taste hack follows, try to think in something else - when reading this */ - if (flags & IRIX_MAP_AUTOGROW) { - unsigned long old_pos; - long max_size = off2 + len; - - if (max_size > file->f_path.dentry->d_inode->i_size) { - old_pos = sys_lseek(fd, max_size - 1, 0); - sys_write(fd, (void __user *) "", 1); - sys_lseek(fd, old_pos, 0); - } - } - } - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); - - return error; -} - -asmlinkage int irix_dmi(struct pt_regs *regs) -{ - printk("[%s:%d] Wheee.. irix_dmi()\n", - current->comm, current->pid); - - return -EINVAL; -} - -asmlinkage int irix_pread(int fd, char __user *buf, int cnt, int off64, - int off1, int off2) -{ - printk("[%s:%d] Wheee.. irix_pread(%d,%p,%d,%d,%d,%d)\n", - current->comm, current->pid, fd, buf, cnt, off64, off1, off2); - - return -EINVAL; -} - -asmlinkage int irix_pwrite(int fd, char __user *buf, int cnt, int off64, - int off1, int off2) -{ - printk("[%s:%d] Wheee.. irix_pwrite(%d,%p,%d,%d,%d,%d)\n", - current->comm, current->pid, fd, buf, cnt, off64, off1, off2); - - return -EINVAL; -} - -asmlinkage int irix_sgifastpath(int cmd, unsigned long arg0, unsigned long arg1, - unsigned long arg2, unsigned long arg3, - unsigned long arg4, unsigned long arg5) -{ - printk("[%s:%d] Wheee.. irix_fastpath(%d,%08lx,%08lx,%08lx,%08lx," - "%08lx,%08lx)\n", - current->comm, current->pid, cmd, arg0, arg1, arg2, - arg3, arg4, arg5); - - return -EINVAL; -} - -struct irix_statvfs64 { - u32 f_bsize; u32 f_frsize; - u64 f_blocks; u64 f_bfree; u64 f_bavail; - u64 f_files; u64 f_ffree; u64 f_favail; - u32 f_fsid; - char f_basetype[16]; - u32 f_flag; u32 f_namemax; - char f_fstr[32]; - u32 f_filler[16]; -}; - -asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *buf) -{ - struct nameidata nd; - struct kstatfs kbuf; - int error, i; - - printk("[%s:%d] Wheee.. irix_statvfs64(%s,%p)\n", - current->comm, current->pid, fname, buf); - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs64))) { - error = -EFAULT; - goto out; - } - - error = user_path_walk(fname, &nd); - if (error) - goto out; - error = vfs_statfs(nd.path.dentry, &kbuf); - if (error) - goto dput_and_out; - - error = __put_user(kbuf.f_bsize, &buf->f_bsize); - error |= __put_user(kbuf.f_frsize, &buf->f_frsize); - error |= __put_user(kbuf.f_blocks, &buf->f_blocks); - error |= __put_user(kbuf.f_bfree, &buf->f_bfree); - error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ - error |= __put_user(kbuf.f_files, &buf->f_files); - error |= __put_user(kbuf.f_ffree, &buf->f_ffree); - error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ -#ifdef __MIPSEB__ - error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); -#else - error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); -#endif - for(i = 0; i < 16; i++) - error |= __put_user(0, &buf->f_basetype[i]); - error |= __put_user(0, &buf->f_flag); - error |= __put_user(kbuf.f_namelen, &buf->f_namemax); - for(i = 0; i < 32; i++) - error |= __put_user(0, &buf->f_fstr[i]); - -dput_and_out: - path_put(&nd.path); -out: - return error; -} - -asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs __user *buf) -{ - struct kstatfs kbuf; - struct file *file; - int error, i; - - printk("[%s:%d] Wheee.. irix_fstatvfs64(%d,%p)\n", - current->comm, current->pid, fd, buf); - - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) { - error = -EFAULT; - goto out; - } - if (!(file = fget(fd))) { - error = -EBADF; - goto out; - } - error = vfs_statfs(file->f_path.dentry, &kbuf); - if (error) - goto out_f; - - error = __put_user(kbuf.f_bsize, &buf->f_bsize); - error |= __put_user(kbuf.f_frsize, &buf->f_frsize); - error |= __put_user(kbuf.f_blocks, &buf->f_blocks); - error |= __put_user(kbuf.f_bfree, &buf->f_bfree); - error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ - error |= __put_user(kbuf.f_files, &buf->f_files); - error |= __put_user(kbuf.f_ffree, &buf->f_ffree); - error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ -#ifdef __MIPSEB__ - error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); -#else - error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); -#endif - for(i = 0; i < 16; i++) - error |= __put_user(0, &buf->f_basetype[i]); - error |= __put_user(0, &buf->f_flag); - error |= __put_user(kbuf.f_namelen, &buf->f_namemax); - error |= __clear_user(buf->f_fstr, sizeof(buf->f_fstr[i])) ? -EFAULT : 0; - -out_f: - fput(file); -out: - return error; -} - -asmlinkage int irix_getmountid(char __user *fname, unsigned long __user *midbuf) -{ - int err; - - printk("[%s:%d] irix_getmountid(%s, %p)\n", - current->comm, current->pid, fname, midbuf); - if (!access_ok(VERIFY_WRITE, midbuf, (sizeof(unsigned long) * 4))) - return -EFAULT; - - /* - * The idea with this system call is that when trying to determine - * 'pwd' and it's a toss-up for some reason, userland can use the - * fsid of the filesystem to try and make the right decision, but - * we don't have this so for now. XXX - */ - err = __put_user(0, &midbuf[0]); - err |= __put_user(0, &midbuf[1]); - err |= __put_user(0, &midbuf[2]); - err |= __put_user(0, &midbuf[3]); - - return err; -} - -asmlinkage int irix_nsproc(unsigned long entry, unsigned long mask, - unsigned long arg, unsigned long sp, int slen) -{ - printk("[%s:%d] Wheee.. irix_nsproc(%08lx,%08lx,%08lx,%08lx,%d)\n", - current->comm, current->pid, entry, mask, arg, sp, slen); - - return -EINVAL; -} - -#undef DEBUG_GETDENTS - -struct irix_dirent32 { - u32 d_ino; - u32 d_off; - unsigned short d_reclen; - char d_name[1]; -}; - -struct irix_dirent32_callback { - struct irix_dirent32 __user *current_dir; - struct irix_dirent32 __user *previous; - int count; - int error; -}; - -#define NAME_OFFSET32(de) ((int) ((de)->d_name - (char *) (de))) -#define ROUND_UP32(x) (((x)+sizeof(u32)-1) & ~(sizeof(u32)-1)) - -static int irix_filldir32(void *__buf, const char *name, - int namlen, loff_t offset, u64 ino, unsigned int d_type) -{ - struct irix_dirent32 __user *dirent; - struct irix_dirent32_callback *buf = __buf; - unsigned short reclen = ROUND_UP32(NAME_OFFSET32(dirent) + namlen + 1); - int err = 0; - u32 d_ino; - -#ifdef DEBUG_GETDENTS - printk("\nirix_filldir32[reclen<%d>namlen<%d>count<%d>]", - reclen, namlen, buf->count); -#endif - buf->error = -EINVAL; /* only used if we fail.. */ - if (reclen > buf->count) - return -EINVAL; - d_ino = ino; - if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) - return -EOVERFLOW; - dirent = buf->previous; - if (dirent) - err = __put_user(offset, &dirent->d_off); - dirent = buf->current_dir; - err |= __put_user(dirent, &buf->previous); - err |= __put_user(d_ino, &dirent->d_ino); - err |= __put_user(reclen, &dirent->d_reclen); - err |= copy_to_user((char __user *)dirent->d_name, name, namlen) ? -EFAULT : 0; - err |= __put_user(0, &dirent->d_name[namlen]); - dirent = (struct irix_dirent32 __user *) ((char __user *) dirent + reclen); - - buf->current_dir = dirent; - buf->count -= reclen; - - return err; -} - -asmlinkage int irix_ngetdents(unsigned int fd, void __user * dirent, - unsigned int count, int __user *eob) -{ - struct file *file; - struct irix_dirent32 __user *lastdirent; - struct irix_dirent32_callback buf; - int error; - -#ifdef DEBUG_GETDENTS - printk("[%s:%d] ngetdents(%d, %p, %d, %p) ", current->comm, - current->pid, fd, dirent, count, eob); -#endif - error = -EBADF; - file = fget(fd); - if (!file) - goto out; - - buf.current_dir = (struct irix_dirent32 __user *) dirent; - buf.previous = NULL; - buf.count = count; - buf.error = 0; - - error = vfs_readdir(file, irix_filldir32, &buf); - if (error < 0) - goto out_putf; - - error = buf.error; - lastdirent = buf.previous; - if (lastdirent) { - put_user(file->f_pos, &lastdirent->d_off); - error = count - buf.count; - } - - if (put_user(0, eob) < 0) { - error = -EFAULT; - goto out_putf; - } - -#ifdef DEBUG_GETDENTS - printk("eob=%d returning %d\n", *eob, count - buf.count); -#endif - error = count - buf.count; - -out_putf: - fput(file); -out: - return error; -} - -struct irix_dirent64 { - u64 d_ino; - u64 d_off; - unsigned short d_reclen; - char d_name[1]; -}; - -struct irix_dirent64_callback { - struct irix_dirent64 __user *curr; - struct irix_dirent64 __user *previous; - int count; - int error; -}; - -#define NAME_OFFSET64(de) ((int) ((de)->d_name - (char *) (de))) -#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1)) - -static int irix_filldir64(void *__buf, const char *name, - int namlen, loff_t offset, u64 ino, unsigned int d_type) -{ - struct irix_dirent64 __user *dirent; - struct irix_dirent64_callback * buf = __buf; - unsigned short reclen = ROUND_UP64(NAME_OFFSET64(dirent) + namlen + 1); - int err = 0; - - if (!access_ok(VERIFY_WRITE, buf, sizeof(*buf))) - return -EFAULT; - - if (__put_user(-EINVAL, &buf->error)) /* only used if we fail.. */ - return -EFAULT; - if (reclen > buf->count) - return -EINVAL; - dirent = buf->previous; - if (dirent) - err = __put_user(offset, &dirent->d_off); - dirent = buf->curr; - buf->previous = dirent; - err |= __put_user(ino, &dirent->d_ino); - err |= __put_user(reclen, &dirent->d_reclen); - err |= __copy_to_user((char __user *)dirent->d_name, name, namlen) - ? -EFAULT : 0; - err |= __put_user(0, &dirent->d_name[namlen]); - - dirent = (struct irix_dirent64 __user *) ((char __user *) dirent + reclen); - - buf->curr = dirent; - buf->count -= reclen; - - return err; -} - -asmlinkage int irix_getdents64(int fd, void __user *dirent, int cnt) -{ - struct file *file; - struct irix_dirent64 __user *lastdirent; - struct irix_dirent64_callback buf; - int error; - -#ifdef DEBUG_GETDENTS - printk("[%s:%d] getdents64(%d, %p, %d) ", current->comm, - current->pid, fd, dirent, cnt); -#endif - error = -EBADF; - if (!(file = fget(fd))) - goto out; - - error = -EFAULT; - if (!access_ok(VERIFY_WRITE, dirent, cnt)) - goto out_f; - - error = -EINVAL; - if (cnt < (sizeof(struct irix_dirent64) + 255)) - goto out_f; - - buf.curr = (struct irix_dirent64 __user *) dirent; - buf.previous = NULL; - buf.count = cnt; - buf.error = 0; - error = vfs_readdir(file, irix_filldir64, &buf); - if (error < 0) - goto out_f; - lastdirent = buf.previous; - if (!lastdirent) { - error = buf.error; - goto out_f; - } - if (put_user(file->f_pos, &lastdirent->d_off)) - return -EFAULT; -#ifdef DEBUG_GETDENTS - printk("returning %d\n", cnt - buf.count); -#endif - error = cnt - buf.count; - -out_f: - fput(file); -out: - return error; -} - -asmlinkage int irix_ngetdents64(int fd, void __user *dirent, int cnt, int *eob) -{ - struct file *file; - struct irix_dirent64 __user *lastdirent; - struct irix_dirent64_callback buf; - int error; - -#ifdef DEBUG_GETDENTS - printk("[%s:%d] ngetdents64(%d, %p, %d) ", current->comm, - current->pid, fd, dirent, cnt); -#endif - error = -EBADF; - if (!(file = fget(fd))) - goto out; - - error = -EFAULT; - if (!access_ok(VERIFY_WRITE, dirent, cnt) || - !access_ok(VERIFY_WRITE, eob, sizeof(*eob))) - goto out_f; - - error = -EINVAL; - if (cnt < (sizeof(struct irix_dirent64) + 255)) - goto out_f; - - *eob = 0; - buf.curr = (struct irix_dirent64 __user *) dirent; - buf.previous = NULL; - buf.count = cnt; - buf.error = 0; - error = vfs_readdir(file, irix_filldir64, &buf); - if (error < 0) - goto out_f; - lastdirent = buf.previous; - if (!lastdirent) { - error = buf.error; - goto out_f; - } - if (put_user(file->f_pos, &lastdirent->d_off)) - return -EFAULT; -#ifdef DEBUG_GETDENTS - printk("eob=%d returning %d\n", *eob, cnt - buf.count); -#endif - error = cnt - buf.count; - -out_f: - fput(file); -out: - return error; -} - -asmlinkage int irix_uadmin(unsigned long op, unsigned long func, unsigned long arg) -{ - int retval; - - switch (op) { - case 1: - /* Reboot */ - printk("[%s:%d] irix_uadmin: Wants to reboot...\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 2: - /* Shutdown */ - printk("[%s:%d] irix_uadmin: Wants to shutdown...\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 4: - /* Remount-root */ - printk("[%s:%d] irix_uadmin: Wants to remount root...\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 8: - /* Kill all tasks. */ - printk("[%s:%d] irix_uadmin: Wants to kill all tasks...\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 256: - /* Set magic mushrooms... */ - printk("[%s:%d] irix_uadmin: Wants to set magic mushroom[%d]...\n", - current->comm, current->pid, (int) func); - retval = -EINVAL; - goto out; - - default: - printk("[%s:%d] irix_uadmin: Unknown operation [%d]...\n", - current->comm, current->pid, (int) op); - retval = -EINVAL; - goto out; - }; - -out: - return retval; -} - -asmlinkage int irix_utssys(char __user *inbuf, int arg, int type, char __user *outbuf) -{ - int retval; - - switch(type) { - case 0: - /* uname() */ - retval = irix_uname((struct iuname __user *)inbuf); - goto out; - - case 2: - /* ustat() */ - printk("[%s:%d] irix_utssys: Wants to do ustat()\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 3: - /* fusers() */ - printk("[%s:%d] irix_utssys: Wants to do fusers()\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - default: - printk("[%s:%d] irix_utssys: Wants to do unknown type[%d]\n", - current->comm, current->pid, (int) type); - retval = -EINVAL; - goto out; - } - -out: - return retval; -} - -#undef DEBUG_FCNTL - -#define IRIX_F_ALLOCSP 10 - -asmlinkage int irix_fcntl(int fd, int cmd, int arg) -{ - int retval; - -#ifdef DEBUG_FCNTL - printk("[%s:%d] irix_fcntl(%d, %d, %d) ", current->comm, - current->pid, fd, cmd, arg); -#endif - if (cmd == IRIX_F_ALLOCSP){ - return 0; - } - retval = sys_fcntl(fd, cmd, arg); -#ifdef DEBUG_FCNTL - printk("%d\n", retval); -#endif - return retval; -} - -asmlinkage int irix_ulimit(int cmd, int arg) -{ - int retval; - - switch(cmd) { - case 1: - printk("[%s:%d] irix_ulimit: Wants to get file size limit.\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 2: - printk("[%s:%d] irix_ulimit: Wants to set file size limit.\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 3: - printk("[%s:%d] irix_ulimit: Wants to get brk limit.\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 4: -#if 0 - printk("[%s:%d] irix_ulimit: Wants to get fd limit.\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; -#endif - retval = current->signal->rlim[RLIMIT_NOFILE].rlim_cur; - goto out; - - case 5: - printk("[%s:%d] irix_ulimit: Wants to get txt offset.\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - default: - printk("[%s:%d] irix_ulimit: Unknown command [%d].\n", - current->comm, current->pid, cmd); - retval = -EINVAL; - goto out; - } -out: - return retval; -} - -asmlinkage int irix_unimp(struct pt_regs *regs) -{ - printk("irix_unimp [%s:%d] v0=%d v1=%d a0=%08lx a1=%08lx a2=%08lx " - "a3=%08lx\n", current->comm, current->pid, - (int) regs->regs[2], (int) regs->regs[3], - regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]); - - return -ENOSYS; -} -- cgit v1.2.3 From 52f4f6bbcff5510f662a002ec1219660ea25af62 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 12 Jun 2008 15:20:05 -0400 Subject: [MIPS] Use kernel-supplied ARRAY_SIZE() macro. Signed-off-by: Robert P. J. Day Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/malta/malta_int.c | 2 +- arch/mips/sgi-ip22/ip28-berr.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index 8c495104b321..4b5694e19d33 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -527,7 +527,7 @@ void __init arch_init_irq(void) .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3 } }; -#define NIPI (sizeof(ipiirq)/sizeof(ipiirq[0])) +#define NIPI ARRAY_SIZE(ipiirq) fill_ipi_map(); gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); if (!gcmp_present) { diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c index 30e12e2ec4b5..fee7a2e0e538 100644 --- a/arch/mips/sgi-ip22/ip28-berr.c +++ b/arch/mips/sgi-ip22/ip28-berr.c @@ -412,7 +412,7 @@ static int ip28_be_interrupt(const struct pt_regs *regs) * Now we have an asynchronous bus error, speculatively or DMA caused. * Need to search all DMA descriptors for the error address. */ - for (i = 0; i < sizeof(hpc3)/sizeof(struct hpc3_stat); ++i) { + for (i = 0; i < ARRAY_SIZE(hpc3); ++i) { struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i; if ((cpu_err_stat & CPU_ERRMASK) && (cpu_err_addr == hp->ndptr || cpu_err_addr == hp->cbp)) @@ -421,7 +421,7 @@ static int ip28_be_interrupt(const struct pt_regs *regs) (gio_err_addr == hp->ndptr || gio_err_addr == hp->cbp)) break; } - if (i < sizeof(hpc3)/sizeof(struct hpc3_stat)) { + if (i < ARRAY_SIZE(hpc3)) { struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i; printk(KERN_ERR "at DMA addresses: HPC3 @ %08lx:" " ctl %08x, ndp %08x, cbp %08x\n", -- cgit v1.2.3 From f2bc713f15103372c0efab5fc09dd813655c5096 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 26 Jun 2008 21:52:51 +0900 Subject: [MIPS] Cobalt: Register new LCD platform device. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/cobalt/Makefile | 2 +- arch/mips/cobalt/lcd.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 1 deletion(-) create mode 100644 arch/mips/cobalt/lcd.c (limited to 'arch/mips') diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile index d73833b7c781..237926288d6d 100644 --- a/arch/mips/cobalt/Makefile +++ b/arch/mips/cobalt/Makefile @@ -2,7 +2,7 @@ # Makefile for the Cobalt micro systems family specific parts of the kernel # -obj-y := buttons.o irq.o led.o reset.o rtc.o serial.o setup.o time.o +obj-y := buttons.o irq.o lcd.o led.o reset.o rtc.o serial.o setup.o time.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_EARLY_PRINTK) += console.o diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c new file mode 100644 index 000000000000..0720e4fae311 --- /dev/null +++ b/arch/mips/cobalt/lcd.c @@ -0,0 +1,55 @@ +/* + * Registration of Cobalt LCD platform device. + * + * Copyright (C) 2008 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include +#include + +static struct resource cobalt_lcd_resource __initdata = { + .start = 0x1f000000, + .end = 0x1f00001f, + .flags = IORESOURCE_MEM, +}; + +static __init int cobalt_lcd_add(void) +{ + struct platform_device *pdev; + int retval; + + pdev = platform_device_alloc("cobalt-lcd", -1); + if (!pdev) + return -ENOMEM; + + retval = platform_device_add_resources(pdev, &cobalt_lcd_resource, 1); + if (retval) + goto err_free_device; + + retval = platform_device_add(pdev); + if (retval) + goto err_free_device; + + return 0; + +err_free_device: + platform_device_put(pdev); + + return retval; +} +device_initcall(cobalt_lcd_add); -- cgit v1.2.3 From 8736595bb2b0ce6188ca31308c40921f3f02f35b Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Wed, 2 Jul 2008 21:06:03 +0200 Subject: [MIPS] Enable FAST-20 for onboard scsi Both onboard controller of the O2 support FAST-20 transfer speeds, but the bit, which signals that to the aic driver, isn't set. Instead of adding detection code to the scsi driver, we just fake the missing bit in the PCI config space of the scsi chips. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/pci/ops-mace.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/pci/ops-mace.c b/arch/mips/pci/ops-mace.c index e95881897ec9..1cfb5588699f 100644 --- a/arch/mips/pci/ops-mace.c +++ b/arch/mips/pci/ops-mace.c @@ -61,6 +61,13 @@ mace_pci_read_config(struct pci_bus *bus, unsigned int devfn, /* ack possible master abort */ mace->pci.error &= ~MACEPCI_ERROR_MASTER_ABORT; mace->pci.control = control; + /* + * someone forgot to set the ultra bit for the onboard + * scsi chips; we fake it here + */ + if (bus->number == 0 && reg == 0x40 && size == 4 && + (devfn == (1 << 3) || devfn == (2 << 3))) + *val |= 0x1000; DPRINTK("read%d: reg=%08x,val=%02x\n", size * 8, reg, *val); -- cgit v1.2.3 From 1ea6428cbdbb0fd1a6e7e8c3044253eab9aff4c7 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Wed, 18 Jun 2008 10:18:19 +0300 Subject: [MIPS] i8253: make the pit_clockevent variable static The pit_clockevent symbol is needlessly defined global. This patch makes that variable static. Spotted by sparse. Compile-tested using Malta defconfig. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/kernel/i8253.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index 38fa1a194bf4..b6ac55162b9a 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -80,7 +80,7 @@ static int pit_next_event(unsigned long delta, struct clock_event_device *evt) * registered. This mechanism replaces the previous #ifdef LOCAL_APIC - * !using_apic_timer decisions in do_timer_interrupt_hook() */ -struct clock_event_device pit_clockevent = { +static struct clock_event_device pit_clockevent = { .name = "pit", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = init_pit_timer, -- cgit v1.2.3 From d58eaab5a01b9cf1819ec57271ac214a39bf6278 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Wed, 18 Jun 2008 10:18:20 +0300 Subject: [MIPS] Namespace clean-up in arch/mips/pci/pci.c The following symbols hose_head hose_tail are needlessly defined global in arch/mips/pci/pci.c, and this patch makes them static. The variable pci_isa_hose is not used, and is removed by this patch. Spotted by namespacecheck. Tested by booting a Malta 4Kc board up to the shell prompt. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/pci/pci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 358ad6210949..d7d6cb063d26 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -29,8 +29,7 @@ unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES; * The PCI controller list. */ -struct pci_controller *hose_head, **hose_tail = &hose_head; -struct pci_controller *pci_isa_hose; +static struct pci_controller *hose_head, **hose_tail = &hose_head; unsigned long PCIBIOS_MIN_IO = 0x0000; unsigned long PCIBIOS_MIN_MEM = 0; -- cgit v1.2.3 From 7afed6a6c92fadedde8474bbfd92d6debc5e23b0 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Wed, 18 Jun 2008 10:18:21 +0300 Subject: [MIPS] A few cleanups in malta_int.c Both the fill_ipi_map() routine and the gic_intr_map array defined in arch/mips/mips-boards/malta/malta_int.c are not used outside of the latter file. Thus, these objects can become static. Moreover, these two objects are used by the MT code only, which is why this patch adds the appropriate ifdef. While at it, this patch removes an unnecessary preprocessing macro in favor of the commonly used ARRAY_SIZE. Successfully tested using a Qemu-emulated Malta board for both SMP and UP kernels. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/malta/malta_int.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index 4b5694e19d33..b393982c0cc0 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -363,6 +363,7 @@ static msc_irqmap_t __initdata msc_eicirqmap[] = { static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); +#if defined(CONFIG_MIPS_MT_SMP) /* * This GIC specific tabular array defines the association between External * Interrupts and CPUs/Core Interrupts. The nature of the External @@ -394,6 +395,7 @@ static struct gic_intr_map gic_intr_map[] = { { GIC_EXT_INTR(22), 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, { GIC_EXT_INTR(23), 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, }; +#endif /* * GCMP needs to be detected before any SMP initialisation @@ -412,7 +414,8 @@ int __init gcmp_probe(unsigned long addr, unsigned long size) return gcmp_present; } -void __init fill_ipi_map(void) +#if defined(CONFIG_MIPS_MT_SMP) +static void __init fill_ipi_map(void) { int i; @@ -422,6 +425,7 @@ void __init fill_ipi_map(void) (1 << (gic_intr_map[i].pin + 2)); } } +#endif void __init arch_init_irq(void) { @@ -527,7 +531,6 @@ void __init arch_init_irq(void) .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3 } }; -#define NIPI ARRAY_SIZE(ipiirq) fill_ipi_map(); gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); if (!gcmp_present) { @@ -549,7 +552,7 @@ void __init arch_init_irq(void) printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status()); write_c0_status(0x1100dc00); printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); - for (i = 0; i < NIPI; i++) { + for (i = 0; i < ARRAY_SIZE(ipiirq); i++) { setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched); setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call); -- cgit v1.2.3 From 6ccab43b49beced70d8663b47ab471c4a23cb580 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Wed, 18 Jun 2008 10:18:22 +0300 Subject: [MIPS] Make gcmp_probe() static The gcmp_probe() function is needlessly defined global, and this patch makes it static. Tested by booting a Malta 4Kc board up to the shell prompt. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/malta/malta_int.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index b393982c0cc0..ea176113fea9 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -400,7 +400,7 @@ static struct gic_intr_map gic_intr_map[] = { /* * GCMP needs to be detected before any SMP initialisation */ -int __init gcmp_probe(unsigned long addr, unsigned long size) +static int __init gcmp_probe(unsigned long addr, unsigned long size) { if (gcmp_present >= 0) return gcmp_present; -- cgit v1.2.3 From c3dd3de789630b9b1ac8f5175f1c21bbf1cca939 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Wed, 18 Jun 2008 10:18:23 +0300 Subject: [MIPS] Add an appropriate header into display.c The following errors were caught by sparse: >>>>>>>>>>> arch/mips/mips-boards/generic/display.c:30:6: warning: symbol 'mips_display_message' was not declared. Should it be static? arch/mips/mips-boards/generic/display.c:58:6: warning: symbol 'mips_scroll_message' was not declared. Should it be static? >>>>>>>>>>> This patch includes the asm/mips-boards/prom.h header file into arch/mips/mips-boards/generic/display.c. This adds the needed function declarations, and the errors are gone. Compile-tested using defconfigs for Malta, Atlas and SEAD boards. Runtime test was successfully performed by booting a Malta 4Kc board up to the shell prompt. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/display.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/mips') diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mips-boards/generic/display.c index 2a0057cfc30d..7c8828fcb0ad 100644 --- a/arch/mips/mips-boards/generic/display.c +++ b/arch/mips/mips-boards/generic/display.c @@ -22,6 +22,7 @@ #include #include #include +#include extern const char display_string[]; static unsigned int display_count; -- cgit v1.2.3 From 7a2852e49fe2d19296812c0f0f833b0ee3043bbb Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 18 Mar 2008 22:47:56 +0100 Subject: [MIPS] IP28: switch to "normal" mode after PROM no longer needed SGI-IP28 is running in so called slow mode, when kernel is started from the PROM. PROM calls must be done in slow mode otherwise the PROM will issue an error. To get better memory performance we now switch to normal mode, when the PROM is no longer needed. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip22/ip22-mc.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c index 3f35d6367bec..5268ac187bbd 100644 --- a/arch/mips/sgi-ip22/ip22-mc.c +++ b/arch/mips/sgi-ip22/ip22-mc.c @@ -208,4 +208,30 @@ void __init sgimc_init(void) void __init prom_meminit(void) {} void __init prom_free_prom_memory(void) { +#ifdef CONFIG_SGI_IP28 + u32 mconfig1; + unsigned long flags; + spinlock_t lock; + + /* + * because ARCS accesses memory uncached we wait until ARCS + * isn't needed any longer, before we switch from slow to + * normal mode + */ + spin_lock_irqsave(&lock, flags); + mconfig1 = sgimc->mconfig1; + /* map ECC register */ + sgimc->mconfig1 = (mconfig1 & 0xffff0000) | 0x2060; + iob(); + /* switch to normal mode */ + *(unsigned long *)PHYS_TO_XKSEG_UNCACHED(0x60000000) = 0; + iob(); + /* reduce WR_COL */ + sgimc->cmacc = (sgimc->cmacc & ~0xf) | 4; + iob(); + /* restore old config */ + sgimc->mconfig1 = mconfig1; + iob(); + spin_unlock_irqrestore(&lock, flags); +#endif } -- cgit v1.2.3 From 8fa9cc16f820915fbe8ab6047c420703a87c307e Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Sat, 5 Jul 2008 01:12:13 +0200 Subject: [MIPS] IP32: Add platform devices for audio and volume button Create platform devices for audio and volume button driver. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-platform.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c index 89a71f49b692..2ee401ba0b25 100644 --- a/arch/mips/sgi-ip32/ip32-platform.c +++ b/arch/mips/sgi-ip32/ip32-platform.c @@ -65,6 +65,42 @@ static __init int meth_devinit(void) device_initcall(meth_devinit); +static __init int sgio2audio_devinit(void) +{ + struct platform_device *pd; + int ret; + + pd = platform_device_alloc("sgio2audio", -1); + if (!pd) + return -ENOMEM; + + ret = platform_device_add(pd); + if (ret) + platform_device_put(pd); + + return ret; +} + +device_initcall(sgio2audio_devinit); + +static __init int sgio2btns_devinit(void) +{ + struct platform_device *pd; + int ret; + + pd = platform_device_alloc("sgio2btns", -1); + if (!pd) + return -ENOMEM; + + ret = platform_device_add(pd); + if (ret) + platform_device_put(pd); + + return ret; +} + +device_initcall(sgio2btns_devinit); + MODULE_AUTHOR("Ralf Baechle "); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2"); -- cgit v1.2.3 From af3e69cfc9644c742a22647a5091779b9dfb9653 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 4 Jul 2008 00:59:40 +0900 Subject: [MIPS] Declare some pci variables in header file Declare pci_probe_only, etc. in asm-mips/pci.h file. This will fix some sparse warnings. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/pci/fixup-vr4133.c | 1 - arch/mips/pci/pci-bcm1480.c | 1 - arch/mips/pci/pci-ip27.c | 1 - arch/mips/pci/pci-sb1250.c | 1 - 4 files changed, 4 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c index de5e5f6bbf4c..34e651bd2b5e 100644 --- a/arch/mips/pci/fixup-vr4133.c +++ b/arch/mips/pci/fixup-vr4133.c @@ -171,7 +171,6 @@ void i8259_init(void) int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - extern int pci_probe_only; pci_probe_only = 1; #ifdef CONFIG_ROCKHOPPER diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index d19d262157f2..a9060c771840 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -202,7 +202,6 @@ static int __init bcm1480_pcibios_init(void) { uint32_t cmdreg; uint64_t reg; - extern int pci_probe_only; /* CFE will assign PCI resources */ pci_probe_only = 1; diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index a18516925cdd..ce92f82b16d2 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -47,7 +47,6 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) static int num_bridges = 0; bridge_t *bridge; int slot; - extern int pci_probe_only; pci_probe_only = 1; diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index 9bc102a1380e..bf639590b8b2 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -210,7 +210,6 @@ static int __init sb1250_pcibios_init(void) void __iomem *io_map_base; uint32_t cmdreg; uint64_t reg; - extern int pci_probe_only; /* CFE will assign PCI resources */ pci_probe_only = 1; -- cgit v1.2.3 From b29eee4935d9e5952a7ea8543ea499f06fb86808 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 16 Apr 2008 02:00:45 +0900 Subject: [MIPS] rbtx4927: misc cleanups * Merge tx4927_pci.h into tx4927.h * Kill (broken) external PCI clock frequency reporting * Kill unnecessary wbflush() * Kill unnecessary includes * Kill debug garbages Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/pci/fixup-rbtx4927.c | 1 - arch/mips/pci/ops-tx4927.c | 5 +- arch/mips/tx4927/common/tx4927_dbgio.c | 5 +- arch/mips/tx4927/common/tx4927_prom.c | 8 +- .../tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c | 234 +-------------- .../toshiba_rbtx4927/toshiba_rbtx4927_prom.c | 7 +- .../toshiba_rbtx4927/toshiba_rbtx4927_setup.c | 322 +-------------------- 7 files changed, 29 insertions(+), 553 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c index 7450c335b387..2d234ca017db 100644 --- a/arch/mips/pci/fixup-rbtx4927.c +++ b/arch/mips/pci/fixup-rbtx4927.c @@ -38,7 +38,6 @@ #include #include -#include #undef DEBUG #ifdef DEBUG diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index 150419c8b414..1bbafeb4a774 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -40,10 +40,7 @@ #include #include #include - -#include -#include -#include +#include /* initialize in setup */ struct resource pci_io_resource = { diff --git a/arch/mips/tx4927/common/tx4927_dbgio.c b/arch/mips/tx4927/common/tx4927_dbgio.c index d8423e001b2d..ea1ff23f4b72 100644 --- a/arch/mips/tx4927/common/tx4927_dbgio.c +++ b/arch/mips/tx4927/common/tx4927_dbgio.c @@ -28,9 +28,7 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - -#include -#include +#include u8 getDebugChar(void) { @@ -38,7 +36,6 @@ u8 getDebugChar(void) return (txx9_sio_kdbg_rd()); } - int putDebugChar(u8 byte) { extern int txx9_sio_kdbg_wr( u8 ch ); diff --git a/arch/mips/tx4927/common/tx4927_prom.c b/arch/mips/tx4927/common/tx4927_prom.c index 6eed53d8f386..cc2aa9d63e82 100644 --- a/arch/mips/tx4927/common/tx4927_prom.c +++ b/arch/mips/tx4927/common/tx4927_prom.c @@ -30,12 +30,8 @@ */ #include -#include -#include -#include - -#include -#include +#include +#include #include static unsigned int __init tx4927_process_sdccr(unsigned long addr) diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c index 6d31f2a98abf..c18901a75cc4 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c @@ -28,8 +28,6 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - - /* IRQ Device 00 RBTX4927-ISA/00 @@ -112,76 +110,14 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB */ #include -#include #include -#include -#include -#include -#include #include -#include -#include -#include -#include #include -#include -#include -#include -#include -#include -#include -#include -#include #ifdef CONFIG_TOSHIBA_FPCIB0 #include -#include #endif #include - -#undef TOSHIBA_RBTX4927_IRQ_DEBUG - -#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG -#define TOSHIBA_RBTX4927_IRQ_NONE 0x00000000 - -#define TOSHIBA_RBTX4927_IRQ_INFO ( 1 << 0 ) -#define TOSHIBA_RBTX4927_IRQ_WARN ( 1 << 1 ) -#define TOSHIBA_RBTX4927_IRQ_EROR ( 1 << 2 ) - -#define TOSHIBA_RBTX4927_IRQ_IOC_INIT ( 1 << 10 ) -#define TOSHIBA_RBTX4927_IRQ_IOC_ENABLE ( 1 << 13 ) -#define TOSHIBA_RBTX4927_IRQ_IOC_DISABLE ( 1 << 14 ) - -#define TOSHIBA_RBTX4927_SETUP_ALL 0xffffffff -#endif - - -#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG -static const u32 toshiba_rbtx4927_irq_debug_flag = - (TOSHIBA_RBTX4927_IRQ_NONE | TOSHIBA_RBTX4927_IRQ_INFO | - TOSHIBA_RBTX4927_IRQ_WARN | TOSHIBA_RBTX4927_IRQ_EROR -// | TOSHIBA_RBTX4927_IRQ_IOC_INIT -// | TOSHIBA_RBTX4927_IRQ_IOC_ENABLE -// | TOSHIBA_RBTX4927_IRQ_IOC_DISABLE - ); -#endif - - -#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG -#define TOSHIBA_RBTX4927_IRQ_DPRINTK(flag,str...) \ - if ( (toshiba_rbtx4927_irq_debug_flag) & (flag) ) \ - { \ - char tmp[100]; \ - sprintf( tmp, str ); \ - printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \ - } -#else -#define TOSHIBA_RBTX4927_IRQ_DPRINTK(flag, str...) -#endif - - - - #define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG 0 #define TOSHIBA_RBTX4927_IRQ_IOC_RAW_END 7 @@ -207,39 +143,22 @@ static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { #define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL #define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL - -u32 bit2num(u32 num) -{ - u32 i; - - for (i = 0; i < (sizeof(num) * 8); i++) { - if (num & (1 << i)) { - return (i); - } - } - return (0); -} - int toshiba_rbtx4927_irq_nested(int sw_irq) { - u32 level3; + u8 level3; level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f; if (level3) { - sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + bit2num(level3); - if (sw_irq != TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC) { - goto RETURN; - } - } + sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + fls(level3) - 1; #ifdef CONFIG_TOSHIBA_FPCIB0 - if (tx4927_using_backplane) { - int irq = i8259_irq(); - if (irq >= 0) - sw_irq = irq; - } + if (sw_irq == TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC && + tx4927_using_backplane) { + int irq = i8259_irq(); + if (irq >= 0) + sw_irq = irq; + } #endif - - RETURN: + } return (sw_irq); } @@ -250,21 +169,10 @@ static struct irqaction toshiba_rbtx4927_irq_ioc_action = { .name = TOSHIBA_RBTX4927_IOC_NAME }; - -/**********************************************************************************/ -/* Functions for ioc */ -/**********************************************************************************/ - - static void __init toshiba_rbtx4927_irq_ioc_init(void) { int i; - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_INIT, - "beg=%d end=%d\n", - TOSHIBA_RBTX4927_IRQ_IOC_BEG, - TOSHIBA_RBTX4927_IRQ_IOC_END); - for (i = TOSHIBA_RBTX4927_IRQ_IOC_BEG; i <= TOSHIBA_RBTX4927_IRQ_IOC_END; i++) set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type, @@ -276,37 +184,16 @@ static void __init toshiba_rbtx4927_irq_ioc_init(void) static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq) { - volatile unsigned char v; - - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_ENABLE, - "irq=%d\n", irq); - - if (irq < TOSHIBA_RBTX4927_IRQ_IOC_BEG - || irq > TOSHIBA_RBTX4927_IRQ_IOC_END) { - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR, - "bad irq=%d\n", irq); - panic("\n"); - } + unsigned char v; v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); v |= (1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); } - static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq) { - volatile unsigned char v; - - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_DISABLE, - "irq=%d\n", irq); - - if (irq < TOSHIBA_RBTX4927_IRQ_IOC_BEG - || irq > TOSHIBA_RBTX4927_IRQ_IOC_END) { - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR, - "bad irq=%d\n", irq); - panic("\n"); - } + unsigned char v; v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); v &= ~(1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); @@ -314,7 +201,6 @@ static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq) mmiowb(); } - void __init arch_init_irq(void) { extern void tx4927_irq_init(void); @@ -327,102 +213,4 @@ void __init arch_init_irq(void) #endif /* Onboard 10M Ether: High Active */ set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH); - - wbflush(); -} - -void toshiba_rbtx4927_irq_dump(char *key) -{ -#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG - { - u32 i, j = 0; - for (i = 0; i < NR_IRQS; i++) { - if (strcmp(irq_desc[i].chip->name, "none") - == 0) - continue; - - if ((i >= 1) - && (irq_desc[i - 1].chip->name == - irq_desc[i].chip->name)) { - j++; - } else { - j = 0; - } - TOSHIBA_RBTX4927_IRQ_DPRINTK - (TOSHIBA_RBTX4927_IRQ_INFO, - "%s irq=0x%02x/%3d s=0x%08x h=0x%08x a=0x%08x ah=0x%08x d=%1d n=%s/%02d\n", - key, i, i, irq_desc[i].status, - (u32) irq_desc[i].chip, - (u32) irq_desc[i].action, - (u32) (irq_desc[i].action ? irq_desc[i]. - action->handler : 0), - irq_desc[i].depth, - irq_desc[i].chip->name, j); - } - } -#endif -} - -void toshiba_rbtx4927_irq_dump_pics(char *s) -{ - u32 level0_m; - u32 level0_s; - u32 level1_m; - u32 level1_s; - u32 level2; - u32 level2_p; - u32 level2_s; - u32 level3_m; - u32 level3_s; - u32 level4_m; - u32 level4_s; - u32 level5_m; - u32 level5_s; - - if (s == NULL) - s = "null"; - - level0_m = (read_c0_status() & 0x0000ff00) >> 8; - level0_s = (read_c0_cause() & 0x0000ff00) >> 8; - - level1_m = level0_m; - level1_s = level0_s & 0x87; - - level2 = __raw_readl((void __iomem *)0xff1ff6a0UL); - level2_p = (((level2 & 0x10000)) ? 0 : 1); - level2_s = (((level2 & 0x1f) == 0x1f) ? 0 : (level2 & 0x1f)); - - level3_m = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB) & 0x1f; - level3_s = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f; - - level4_m = inb(0x21); - outb(0x0A, 0x20); - level4_s = inb(0x20); - - level5_m = inb(0xa1); - outb(0x0A, 0xa0); - level5_s = inb(0xa0); - - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "dump_raw_pic() "); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "cp0:m=0x%02x/s=0x%02x ", level0_m, - level0_s); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "cp0:m=0x%02x/s=0x%02x ", level1_m, - level1_s); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "pic:e=0x%02x/s=0x%02x ", level2_p, - level2_s); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "ioc:m=0x%02x/s=0x%02x ", level3_m, - level3_s); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "sbm:m=0x%02x/s=0x%02x ", level4_m, - level4_s); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "sbs:m=0x%02x/s=0x%02x ", level5_m, - level5_s); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, "[%s]\n", - s); } diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c index f3f86857beae..fdbad4bc6021 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c @@ -30,13 +30,10 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include -#include -#include -#include - -#include +#include #include #include +#include #include void __init prom_init_cmdline(void) diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c index 2203c77b2ce2..185f303c0e2a 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c @@ -62,43 +62,10 @@ #include #endif #include -#ifdef CONFIG_PCI -#include -#endif #ifdef CONFIG_SERIAL_TXX9 #include #endif -#undef TOSHIBA_RBTX4927_SETUP_DEBUG - -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG -#define TOSHIBA_RBTX4927_SETUP_SETUP ( 1 << 4 ) -#define TOSHIBA_RBTX4927_SETUP_PCIBIOS ( 1 << 7 ) -#define TOSHIBA_RBTX4927_SETUP_PCI1 ( 1 << 8 ) -#define TOSHIBA_RBTX4927_SETUP_PCI2 ( 1 << 9 ) - -#define TOSHIBA_RBTX4927_SETUP_ALL 0xffffffff -#endif - -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG -static const u32 toshiba_rbtx4927_setup_debug_flag = - (TOSHIBA_RBTX4927_SETUP_SETUP | - | TOSHIBA_RBTX4927_SETUP_PCIBIOS | TOSHIBA_RBTX4927_SETUP_PCI1 | - TOSHIBA_RBTX4927_SETUP_PCI2); -#endif - -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG -#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag,str...) \ - if ( (toshiba_rbtx4927_setup_debug_flag) & (flag) ) \ - { \ - char tmp[100]; \ - sprintf( tmp, str ); \ - printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \ - } -#else -#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag, str...) -#endif - /* These functions are used for rebooting or halting the machine*/ extern void toshiba_rbtx4927_restart(char *command); extern void toshiba_rbtx4927_halt(void); @@ -124,7 +91,6 @@ unsigned long mips_memory_upper; static int tx4927_ccfg_toeon = 1; static int tx4927_pcic_trdyto = 0; /* default: disabled */ unsigned long tx4927_ce_base[8]; -void tx4927_reset_pci_pcic(void); int tx4927_pci66 = 0; /* 0:auto */ #endif @@ -172,9 +138,6 @@ static int __init tx4927_pcibios_init(void) int busno = 0; /* One bus on the Toshiba */ struct pci_controller *hose = &tx4927_controller; - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS, - "-\n"); - for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) { early_read_config_dword(hose, busno, busno, pci_devfn, PCI_VENDOR_ID, &id); @@ -187,13 +150,6 @@ static int __init tx4927_pcibios_init(void) u8 v08_64; u32 v32_b0; u8 v08_e1; -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG - char *s = " sb/isa --"; -#endif - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n", - s); early_read_config_byte(hose, busno, busno, pci_devfn, 0x64, &v08_64); @@ -202,16 +158,6 @@ static int __init tx4927_pcibios_init(void) early_read_config_byte(hose, busno, busno, pci_devfn, 0xe1, &v08_e1); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0x64 = 0x%02x\n", s, v08_64); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0xb0 = 0x%02x\n", s, v32_b0); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0xe1 = 0x%02x\n", s, v08_e1); - /* serial irq control */ v08_64 = 0xd0; @@ -222,50 +168,12 @@ static int __init tx4927_pcibios_init(void) v08_e1 &= 0xf0; v08_e1 |= 0x0d; - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0x64 = 0x%02x\n", s, v08_64); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0xb0 = 0x%02x\n", s, v32_b0); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0xe1 = 0x%02x\n", s, v08_e1); - early_write_config_byte(hose, busno, busno, pci_devfn, 0x64, v08_64); early_write_config_dword(hose, busno, busno, pci_devfn, 0xb0, v32_b0); early_write_config_byte(hose, busno, busno, pci_devfn, 0xe1, v08_e1); - -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG - { - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x64, - &v08_64); - early_read_config_dword(hose, busno, busno, - pci_devfn, 0xb0, - &v32_b0); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0xe1, - &v08_e1); - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0x64 = 0x%02x\n", s, v08_64); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0xb0 = 0x%02x\n", s, v32_b0); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0xe1 = 0x%02x\n", s, v08_e1); - } -#endif - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n", - s); } if (id == 0x91301055) { @@ -274,13 +182,6 @@ static int __init tx4927_pcibios_init(void) u8 v08_41; u8 v08_43; u8 v08_5c; -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG - char *s = " sb/ide --"; -#endif - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n", - s); early_read_config_byte(hose, busno, busno, pci_devfn, 0x04, &v08_04); @@ -293,22 +194,6 @@ static int __init tx4927_pcibios_init(void) early_read_config_byte(hose, busno, busno, pci_devfn, 0x5c, &v08_5c); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0x04 = 0x%02x\n", s, v08_04); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0x09 = 0x%02x\n", s, v08_09); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0x41 = 0x%02x\n", s, v08_41); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0x43 = 0x%02x\n", s, v08_43); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0x5c = 0x%02x\n", s, v08_5c); - /* enable ide master/io */ v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO); @@ -332,22 +217,6 @@ static int __init tx4927_pcibios_init(void) */ v08_5c |= 0x01; - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0x04 = 0x%02x\n", s, v08_04); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0x09 = 0x%02x\n", s, v08_09); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0x41 = 0x%02x\n", s, v08_41); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0x43 = 0x%02x\n", s, v08_43); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0x5c = 0x%02x\n", s, v08_5c); - early_write_config_byte(hose, busno, busno, pci_devfn, 0x5c, v08_5c); early_write_config_byte(hose, busno, busno, @@ -358,54 +227,11 @@ static int __init tx4927_pcibios_init(void) pci_devfn, 0x41, v08_41); early_write_config_byte(hose, busno, busno, pci_devfn, 0x43, v08_43); - -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG - { - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x04, - &v08_04); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x09, - &v08_09); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x41, - &v08_41); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x43, - &v08_43); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x5c, - &v08_5c); - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0x04 = 0x%02x\n", s, v08_04); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0x09 = 0x%02x\n", s, v08_09); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0x41 = 0x%02x\n", s, v08_41); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0x43 = 0x%02x\n", s, v08_43); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0x5c = 0x%02x\n", s, v08_5c); - } -#endif - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n", - s); } } register_pci_controller(&tx4927_controller); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS, - "+\n"); - return 0; } @@ -419,45 +245,13 @@ void __init tx4927_pci_setup(void) static int called = 0; extern unsigned int tx4927_get_mem_size(void); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "-\n"); - mips_memory_upper = tx4927_get_mem_size() << 20; mips_memory_upper += KSEG0; - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=mips_memory_upper\n", - mips_memory_upper); mips_pci_io_base = TX4927_PCIIO; mips_pci_io_size = TX4927_PCIIO_SIZE; mips_pci_mem_base = TX4927_PCIMEM; mips_pci_mem_size = TX4927_PCIMEM_SIZE; - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=mips_pci_io_base\n", - mips_pci_io_base); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=mips_pci_io_size\n", - mips_pci_io_size); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=mips_pci_mem_base\n", - mips_pci_mem_base); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=mips_pci_mem_size\n", - mips_pci_mem_size); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=pci_io_resource.start\n", - pci_io_resource.start); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=pci_io_resource.end\n", - pci_io_resource.end); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=pci_mem_resource.start\n", - pci_mem_resource.start); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=pci_mem_resource.end\n", - pci_mem_resource.end); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=mips_io_port_base", - mips_io_port_base); if (!called) { printk ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", @@ -521,29 +315,10 @@ void __init tx4927_pci_setup(void) } printk("Internal(%dMHz)", pciclk / 1000000); - } else { - int pciclk = 0; - int pciclk_setting = *tx4927_pci_clk_ptr; - switch (pciclk_setting & TX4927_PCI_CLK_MASK) { - case TX4927_PCI_CLK_33: - pciclk = 33333333; - break; - case TX4927_PCI_CLK_25: - pciclk = 25000000; - break; - case TX4927_PCI_CLK_66: - pciclk = 66666666; - break; - case TX4927_PCI_CLK_50: - pciclk = 50000000; - break; - } - printk("External(%dMHz)", pciclk / 1000000); - } + } else + printk("External"); printk("\n"); - - /* GB->PCI mappings */ tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4; tx4927_pcicptr->g2piogbase = mips_pci_io_base | @@ -644,12 +419,7 @@ void __init tx4927_pci_setup(void) tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - ":pci setup complete:\n"); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "+\n"); } - #endif /* CONFIG_PCI */ static void __noreturn wait_forever(void) @@ -679,7 +449,6 @@ void toshiba_rbtx4927_restart(char *command) /* no return */ } - void toshiba_rbtx4927_halt(void) { printk(KERN_NOTICE "System Halted\n"); @@ -702,33 +471,19 @@ void __init plat_mem_setup(void) printk("CPU is %s\n", toshiba_name); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - "-\n"); - /* f/w leaves this on at startup */ - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - ":Clearing STO_ERL.\n"); clear_c0_status(ST0_ERL); /* enable caches -- HCP5 does this, pmon does not */ - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - ":Enabling TX49_CONF_IC,TX49_CONF_DC.\n"); cp0_config = read_c0_config(); cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); write_c0_config(cp0_config); set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - ":mips_io_port_base=0x%08lx\n", - mips_io_port_base); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - ":Resource\n"); ioport_resource.end = 0xffffffff; iomem_resource.end = 0xffffffff; - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - ":ResetRoutines\n"); _machine_restart = toshiba_rbtx4927_restart; _machine_halt = toshiba_rbtx4927_halt; pm_power_off = toshiba_rbtx4927_power_off; @@ -761,23 +516,6 @@ void __init plat_mem_setup(void) * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) * */ - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1, - "ccfg is %lx, PCIDIVMODE is %x\n", - (unsigned long) tx4927_ccfgptr->ccfg, - (unsigned long) tx4927_ccfgptr->ccfg & - (mips_machtype == MACH_TOSHIBA_RBTX4937 ? - TX4937_CCFG_PCIDIVMODE_MASK : - TX4927_CCFG_PCIDIVMODE_MASK)); - - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1, - "PCI66 mode is %lx, PCI mode is %lx, pci arb is %lx\n", - (unsigned long) tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCI66, - (unsigned long) tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIMIDE, - (unsigned long) tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIXARB); - if (mips_machtype == MACH_TOSHIBA_RBTX4937) switch ((unsigned long)tx4927_ccfgptr-> ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { @@ -818,49 +556,18 @@ void __init plat_mem_setup(void) /* this is on ISA bus behind PCI bus, so need PCI up first */ #ifdef CONFIG_TOSHIBA_FPCIB0 - { - if (tx4927_using_backplane) { - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, - ":fpcibo=yes\n"); - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, - ":smsc_fdc37m81x_init()\n"); - smsc_fdc37m81x_init(0x3f0); - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, - ":smsc_fdc37m81x_config_beg()\n"); - smsc_fdc37m81x_config_beg(); - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, - ":smsc_fdc37m81x_config_set(KBD)\n"); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, - SMSC_FDC37M81X_KBD); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, - 1); - - smsc_fdc37m81x_config_end(); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, - ":smsc_fdc37m81x_config_end()\n"); - } else { - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, - ":fpcibo=not_found\n"); - } - } -#else - { - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, ":fpcibo=no\n"); + if (tx4927_using_backplane) { + smsc_fdc37m81x_init(0x3f0); + smsc_fdc37m81x_config_beg(); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, + SMSC_FDC37M81X_KBD); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, + 1); + smsc_fdc37m81x_config_end(); } #endif - #endif /* CONFIG_PCI */ #ifdef CONFIG_SERIAL_TXX9 @@ -894,17 +601,12 @@ void __init plat_mem_setup(void) } #endif - #ifdef CONFIG_IP_PNP argptr = prom_getcmdline(); if (strstr(argptr, "ip=") == NULL) { strcat(argptr, " ip=any"); } #endif - - - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - "+\n"); } void __init plat_time_init(void) -- cgit v1.2.3 From b012cffe7f6971e9ba5afca034a3d80e1cf1435c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:33 +0100 Subject: [MIPS] Replace use of print_symbol with new %sP pointer format. Signed-off-by: Ralf Baechle --- arch/mips/kernel/mips-mt.c | 11 +++++------ arch/mips/kernel/traps.c | 8 ++++---- arch/mips/sgi-ip27/ip27-nmi.c | 10 +++------- 3 files changed, 12 insertions(+), 17 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c index 640fb0cc6e39..d01665a453f5 100644 --- a/arch/mips/kernel/mips-mt.c +++ b/arch/mips/kernel/mips-mt.c @@ -4,7 +4,6 @@ */ #include -#include #include #include #include @@ -84,9 +83,9 @@ void mips_mt_regdump(unsigned long mvpctl) read_vpe_c0_vpeconf0()); printk(" VPE%d.Status : %08lx\n", i, read_vpe_c0_status()); - printk(" VPE%d.EPC : %08lx ", - i, read_vpe_c0_epc()); - print_symbol("%s\n", read_vpe_c0_epc()); + printk(" VPE%d.EPC : %08lx %pS\n", + i, read_vpe_c0_epc(), + (void *) read_vpe_c0_epc()); printk(" VPE%d.Cause : %08lx\n", i, read_vpe_c0_cause()); printk(" VPE%d.Config7 : %08lx\n", @@ -111,8 +110,8 @@ void mips_mt_regdump(unsigned long mvpctl) } printk(" TCStatus : %08lx\n", tcstatval); printk(" TCBind : %08lx\n", read_tc_c0_tcbind()); - printk(" TCRestart : %08lx ", read_tc_c0_tcrestart()); - print_symbol("%s\n", read_tc_c0_tcrestart()); + printk(" TCRestart : %08lx %pS\n", + read_tc_c0_tcrestart(), (void *) read_tc_c0_tcrestart()); printk(" TCHalt : %08lx\n", haltval); printk(" TCContext : %08lx\n", read_tc_c0_tccontext()); if (!haltval) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 6e7e4a2775f6..b8ea4e9d0d87 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -248,11 +248,11 @@ static void __show_regs(const struct pt_regs *regs) /* * Saved cp0 registers */ - printk("epc : %0*lx ", field, regs->cp0_epc); - print_symbol("%s ", regs->cp0_epc); + printk("epc : %0*lx %pS\n", field, regs->cp0_epc, + (void *) regs->cp0_epc); printk(" %s\n", print_tainted()); - printk("ra : %0*lx ", field, regs->regs[31]); - print_symbol("%s\n", regs->regs[31]); + printk("ra : %0*lx %pS\n", field, regs->regs[31], + (void *) regs->regs[31]); printk("Status: %08x ", (uint32_t) regs->cp0_status); diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c index b0a25e1ee8b7..64459e7d891b 100644 --- a/arch/mips/sgi-ip27/ip27-nmi.c +++ b/arch/mips/sgi-ip27/ip27-nmi.c @@ -1,4 +1,3 @@ -#include #include #include #include @@ -84,13 +83,10 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice) /* * Saved cp0 registers */ - printk("epc : %016lx ", nr->epc); - print_symbol("%s ", nr->epc); + printk("epc : %016lx %pS\n", nr->epc, (void *) nr->epc); printk("%s\n", print_tainted()); - printk("ErrEPC: %016lx ", nr->error_epc); - print_symbol("%s\n", nr->error_epc); - printk("ra : %016lx ", nr->gpr[31]); - print_symbol("%s\n", nr->gpr[31]); + printk("ErrEPC: %016lx %pS\n", nr->error_epc, (void *) nr->error_epc); + printk("ra : %016lx %pS\n", nr->gpr[31], (void *) nr->gpr[31]); printk("Status: %08lx ", nr->sr); if (nr->sr & ST0_KX) -- cgit v1.2.3 From 74c8494eeb7b321e5922ee43120f91c7c9b7317f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:33 +0100 Subject: [MIPS] Bigsur: Make defconfig a bit more useful. Signed-off-by: Ralf Baechle --- arch/mips/configs/bigsur_defconfig | 162 ++++++++++++++++++++++++------------- 1 file changed, 104 insertions(+), 58 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 3b42cea2e402..2b4ad5f3e959 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 08:11:19 2008 +# Linux kernel version: 2.6.26-rc8 +# Wed Jul 2 17:02:55 2008 # CONFIG_MIPS=y @@ -148,6 +148,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=0 @@ -156,6 +157,7 @@ CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS_DEFAULT_4=y CONFIG_NR_CPUS=4 +# CONFIG_MIPS_CMP is not set CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -223,6 +225,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -241,12 +244,14 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y @@ -302,7 +307,6 @@ CONFIG_BINFMT_ELF32=y # Power management options # CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # @@ -399,9 +403,11 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y +# CONFIG_IPV6_MROUTE is not set CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -600,7 +606,7 @@ CONFIG_BLK_DEV_IT8213=m CONFIG_BLK_DEV_TC86C001=m # CONFIG_BLK_DEV_IDE_SWARM is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -617,11 +623,12 @@ CONFIG_SCSI_PROC_FS=y # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set +CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -650,6 +657,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set @@ -675,7 +683,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +CONFIG_SATA_SIL24=y +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -685,7 +696,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -CONFIG_SATA_SIL24=y # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -730,12 +740,17 @@ CONFIG_PATA_SIL680=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -797,7 +812,6 @@ CONFIG_SB1250_MAC=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -815,6 +829,7 @@ CONFIG_NETXEN_NIC=m # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -822,6 +837,7 @@ CONFIG_NETXEN_NIC=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -867,6 +883,7 @@ CONFIG_SERIO_RAW=m # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set @@ -903,7 +920,6 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -913,13 +929,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -946,6 +955,7 @@ CONFIG_I2C_SIBYTE=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -955,23 +965,18 @@ CONFIG_SENSORS_EEPROM=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set CONFIG_SENSORS_PCF8591=y -# CONFIG_TPS65010 is not set CONFIG_SENSORS_MAX6875=y # CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y CONFIG_I2C_DEBUG_CHIP=y - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -984,12 +989,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -1015,6 +1030,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1023,13 +1040,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1123,7 +1137,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1194,6 +1207,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1204,6 +1218,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1217,6 +1232,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1237,53 +1253,82 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CTR=m +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=y + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_CTR=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CCM=m -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -# CONFIG_CRYPTO_CRC32C is not set -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set -CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1292,9 +1337,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m -- cgit v1.2.3 From 372a775f50347f5c1dd87752b16e5c05ea965790 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:33 +0100 Subject: [MIPS] Enable -ffunction-sections sections. -ffunction-sections serves as a workaround for the problems caused by the limited branch range in some inline assembler fragments for very large compilation units. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index ad36c946ff96..0b8d82d55c66 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -14,7 +14,7 @@ KBUILD_DEFCONFIG := ip22_defconfig -cflags-y := +cflags-y := -ffunction-sections # # Select the object file format to substitute into the linker script. -- cgit v1.2.3 From 2157bc68711bf0e69f9aca4d310bd863298fbb3f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:33 +0100 Subject: [MIPS] Atlas: Remove support code. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 32 - arch/mips/Makefile | 9 - arch/mips/configs/atlas_defconfig | 1472 ---------------------------- arch/mips/configs/bcm47xx_defconfig | 1 - arch/mips/configs/bigsur_defconfig | 1 - arch/mips/configs/capcella_defconfig | 1 - arch/mips/configs/cobalt_defconfig | 1 - arch/mips/configs/db1000_defconfig | 1 - arch/mips/configs/db1100_defconfig | 1 - arch/mips/configs/db1200_defconfig | 1 - arch/mips/configs/db1500_defconfig | 1 - arch/mips/configs/db1550_defconfig | 1 - arch/mips/configs/decstation_defconfig | 1 - arch/mips/configs/e55_defconfig | 1 - arch/mips/configs/emma2rh_defconfig | 1 - arch/mips/configs/excite_defconfig | 1 - arch/mips/configs/fulong_defconfig | 1 - arch/mips/configs/ip22_defconfig | 1 - arch/mips/configs/ip27_defconfig | 1 - arch/mips/configs/ip28_defconfig | 1 - arch/mips/configs/ip32_defconfig | 1 - arch/mips/configs/jazz_defconfig | 1 - arch/mips/configs/jmr3927_defconfig | 1 - arch/mips/configs/lasat_defconfig | 1 - arch/mips/configs/malta_defconfig | 1 - arch/mips/configs/mipssim_defconfig | 1 - arch/mips/configs/mpc30x_defconfig | 1 - arch/mips/configs/msp71xx_defconfig | 1 - arch/mips/configs/mtx1_defconfig | 1 - arch/mips/configs/pb1100_defconfig | 1 - arch/mips/configs/pb1500_defconfig | 1 - arch/mips/configs/pb1550_defconfig | 1 - arch/mips/configs/pnx8550-jbs_defconfig | 1 - arch/mips/configs/pnx8550-stb810_defconfig | 1 - arch/mips/configs/rbhma4200_defconfig | 1 - arch/mips/configs/rbhma4500_defconfig | 1 - arch/mips/configs/rm200_defconfig | 1 - arch/mips/configs/sb1250-swarm_defconfig | 1 - arch/mips/configs/sead_defconfig | 1 - arch/mips/configs/tb0219_defconfig | 1 - arch/mips/configs/tb0226_defconfig | 1 - arch/mips/configs/tb0287_defconfig | 1 - arch/mips/configs/workpad_defconfig | 1 - arch/mips/configs/wrppmc_defconfig | 1 - arch/mips/configs/yosemite_defconfig | 1 - arch/mips/mips-boards/atlas/Makefile | 22 - arch/mips/mips-boards/atlas/atlas_gdb.c | 97 -- arch/mips/mips-boards/atlas/atlas_int.c | 272 ----- arch/mips/mips-boards/atlas/atlas_setup.c | 82 -- arch/mips/mips-boards/generic/console.c | 11 +- arch/mips/mips-boards/generic/init.c | 8 - arch/mips/mips-boards/generic/reset.c | 17 - arch/mips/mips-boards/generic/time.c | 5 +- arch/mips/pci/Makefile | 1 - arch/mips/pci/fixup-atlas.c | 91 -- 55 files changed, 2 insertions(+), 2159 deletions(-) delete mode 100644 arch/mips/configs/atlas_defconfig delete mode 100644 arch/mips/mips-boards/atlas/Makefile delete mode 100644 arch/mips/mips-boards/atlas/atlas_gdb.c delete mode 100644 arch/mips/mips-boards/atlas/atlas_int.c delete mode 100644 arch/mips/mips-boards/atlas/atlas_setup.c delete mode 100644 arch/mips/pci/fixup-atlas.c (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 21d6ec1e5368..6383c700686c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -181,38 +181,6 @@ config LEMOTE_FULONG Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and an FPGA northbridge -config MIPS_ATLAS - bool "MIPS Atlas board" - select BOOT_ELF32 - select BOOT_RAW - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select SYS_HAS_EARLY_PRINTK - select IRQ_CPU - select HW_HAS_PCI - select MIPS_BOARDS_GEN - select MIPS_BONITO64 - select PCI_GT64XXX_PCI0 - select MIPS_MSC - select RM7000_CPU_SCACHE - select SWAP_IO_SPACE - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_HAS_CPU_MIPS64_R1 - select SYS_HAS_CPU_NEVADA - select SYS_HAS_CPU_RM7000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL - select SYS_SUPPORTS_SMARTMIPS - select GENERIC_HARDIRQS_NO__DO_IRQ - help - This enables support for the MIPS Technologies Atlas evaluation - board. - config MIPS_MALTA bool "MIPS Malta board" select ARCH_MAY_HAVE_PC_FDC diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 0b8d82d55c66..9bc2c763909f 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -309,15 +309,6 @@ cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote # core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/ -# -# MIPS Atlas board -# -core-$(CONFIG_MIPS_ATLAS) += arch/mips/mips-boards/atlas/ -cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-atlas -cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-mips -load-$(CONFIG_MIPS_ATLAS) += 0xffffffff80100000 -all-$(CONFIG_MIPS_ATLAS) := vmlinux.bin - # # MIPS Malta board # diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig deleted file mode 100644 index 3443f6cd57bb..000000000000 --- a/arch/mips/configs/atlas_defconfig +++ /dev/null @@ -1,1472 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Sun Feb 18 21:27:35 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -CONFIG_MIPS_ATLAS=y -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_MIPS_BONITO64=y -CONFIG_MIPS_MSC=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_MIPS_BOARDS_GEN=y -CONFIG_MIPS_GT64120=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_BOOT_ELF32=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_CPU_MIPS64_R1=y -CONFIG_SYS_HAS_CPU_NEVADA=y -CONFIG_SYS_HAS_CPU_RM7000=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPSR1=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_BOARD_SCACHE=y -CONFIG_RM7000_CPU_SCACHE=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_SYS_SUPPORTS_MULTITHREADING=y -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y -# CONFIG_CPU_HAS_SMARTMIPS is not set -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_SYS_SUPPORTS_SMARTMIPS=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -CONFIG_HZ_100=y -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=100 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -CONFIG_IP_VS=m -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IPV6=m -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=y -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_GRE=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_NF_NAT_SIP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_RAW=m - -# -# Bridge: Netfilter Configuration -# -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_ULOG=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_FIFO=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_INGRESS=m - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -# CONFIG_CLS_U32_MARK is not set -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -CONFIG_NET_CLS_POLICE=y -CONFIG_NET_CLS_IND=y -CONFIG_NET_ESTIMATOR=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y -CONFIG_FIB_RULES=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -CONFIG_BLK_DEV_UMEM=m -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=y -CONFIG_SCSI_TGT=m -CONFIG_SCSI_NETLINK=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -CONFIG_SCSI_SAS_LIBSAS_DEBUG=y - -# -# SCSI low-level drivers -# -CONFIG_ISCSI_TCP=m -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -CONFIG_SCSI_SYM53C8XX_MMIO=y -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_PCNET32_NAPI is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -CONFIG_LAN_SAA9730=y -# CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -CONFIG_MOUSE_SERIAL=m -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_RAW=y -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -CONFIG_REISERFS_PROC_INFO=y -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=m -CONFIG_ROMFS_FS=m -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_QUOTA=y -# CONFIG_QFMT_V1 is not set -CONFIG_QFMT_V2=y -CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=m -CONFIG_VXFS_FS=m -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig index c0e42e74dfbd..10d83e4aca58 100644 --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -16,7 +16,6 @@ CONFIG_BCM47XX=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 2b4ad5f3e959..a9926861f14c 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index a94f14b5c8fa..ee8a7fc99f54 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index b7295e988381..ce31a47f1a15 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS_COBALT=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 36578968d386..f99b6f8c9788 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 5a90740c363a..0d6ba9e65ff5 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index 76f37a1159fe..0c6f2a469f09 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_DB1200=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 508c91944f30..02db28f5dc03 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 0c2c70d21db9..a0f19f2e7d59 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_DB1550=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 58c2cd68c3a7..c1ab8a21bb07 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set CONFIG_MACH_DECSTATION=y # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 90d81f5dcebc..88c2420bc627 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig index f9a003c2b3a1..03f0baad1b67 100644 --- a/arch/mips/configs/emma2rh_defconfig +++ b/arch/mips/configs/emma2rh_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 15efacc75d73..873597a4aaf1 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -27,7 +27,6 @@ CONFIG_BASLER_EXCITE=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig index 5887a1735fba..13e1ef2240ea 100644 --- a/arch/mips/configs/fulong_defconfig +++ b/arch/mips/configs/fulong_defconfig @@ -14,7 +14,6 @@ CONFIG_LEMOTE_FULONG=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 4f5e56c9335e..7daf203c1481 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -15,7 +15,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index f40e437bd9e5..83d769f941d6 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig index ec188be9a67a..3c5090a248b7 100644 --- a/arch/mips/configs/ip28_defconfig +++ b/arch/mips/configs/ip28_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index 2c5c624c5d42..f8d1cf3e8749 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index 56148745e8f2..72ff710c878f 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set CONFIG_MACH_JAZZ=y -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index a7cd67753aac..8dc8bef471b4 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig index e6aef999854c..a8fa2055c071 100644 --- a/arch/mips/configs/lasat_defconfig +++ b/arch/mips/configs/lasat_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set CONFIG_LASAT=y # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 3d0da952811c..9a8ed74cc1a9 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -15,7 +15,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set CONFIG_MIPS_MALTA=y # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index 4f6bce99d5cf..1d205446ee70 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set CONFIG_MIPS_SIM=y diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 27e23fc9363a..0c7f35acb702 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index b12b73f6d74f..2dd2a4f38fbe 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index fa3aa3919448..17d66526fa48 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -14,7 +14,6 @@ CONFIG_MACH_ALCHEMY=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 1d0157d3a5bb..eaf608ca65a6 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index d0491a05ee58..62c5a7098ab1 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 16d78d3cd2aa..29c8548b68f7 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 780c7fc24b82..c714f43e7dc8 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index 267f21ed1d0f..c1adcfac6c54 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig index 470f6f4d3ea2..9e1083626292 100644 --- a/arch/mips/configs/rbhma4200_defconfig +++ b/arch/mips/configs/rbhma4200_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 5a39f56b175e..462a652ee022 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 56371b860eb0..2562f355dbf1 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 4b8799802788..ff89765f87f7 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index 3ee75b15c0b0..d3db59bf399b 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set CONFIG_MIPS_SEAD=y # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index 8dd3ae39bcad..34ce11de5367 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index 2ba240e897c6..e5ae6b1839b2 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index a5d0f3c55ed1..2fdfd6659ef1 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index edf90b321fe6..ee411216d373 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index 2e3c683b2052..66d3c11a0382 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set CONFIG_WR_PPMC=y diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index b6178ffbc523..daa4e48a7232 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/mips-boards/atlas/Makefile b/arch/mips/mips-boards/atlas/Makefile deleted file mode 100644 index f71c2dd1041a..000000000000 --- a/arch/mips/mips-boards/atlas/Makefile +++ /dev/null @@ -1,22 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# - -obj-y := atlas_int.o atlas_setup.o -obj-$(CONFIG_KGDB) += atlas_gdb.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mips-boards/atlas/atlas_gdb.c b/arch/mips/mips-boards/atlas/atlas_gdb.c deleted file mode 100644 index 00c98cff62dc..000000000000 --- a/arch/mips/mips-boards/atlas/atlas_gdb.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * This is the interface to the remote debugger stub. - */ -#include -#include -#include - -#define INB(a) inb((unsigned long)a) -#define OUTB(x, a) outb(x, (unsigned long)a) - -/* - * This is the interface to the remote debugger stub - * if the Philips part is used for the debug port, - * called from the platform setup code. - */ -void *saa9730_base = (void *)ATLAS_SAA9730_REG; - -static int saa9730_kgdb_active = 0; - -#define SAA9730_BAUDCLOCK(baud) (((ATLAS_SAA9730_BAUDCLOCK/(baud))/16)-1) - -int saa9730_kgdb_hook(int speed) -{ - int baudclock; - t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR); - - /* - * Clear all interrupts - */ - (void) INB(&kgdb_uart->Lsr); - (void) INB(&kgdb_uart->Msr); - (void) INB(&kgdb_uart->Thr_Rbr); - (void) INB(&kgdb_uart->Iir_Fcr); - - /* - * Now, initialize the UART - */ - /* 8 data bits, one stop bit, no parity */ - OUTB(SAA9730_LCR_DATA8, &kgdb_uart->Lcr); - - baudclock = SAA9730_BAUDCLOCK(speed); - - OUTB((baudclock >> 16) & 0xff, &kgdb_uart->BaudDivMsb); - OUTB( baudclock & 0xff, &kgdb_uart->BaudDivLsb); - - /* Set RTS/DTR active */ - OUTB(SAA9730_MCR_DTR | SAA9730_MCR_RTS, &kgdb_uart->Mcr); - saa9730_kgdb_active = 1; - - return speed; -} - -int saa9730_putDebugChar(char c) -{ - t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR); - - if (!saa9730_kgdb_active) { /* need to init device first */ - return 0; - } - - while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_THRE)) - ; - OUTB(c, &kgdb_uart->Thr_Rbr); - - return 1; -} - -char saa9730_getDebugChar(void) -{ - t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR); - char c; - - if (!saa9730_kgdb_active) { /* need to init device first */ - return 0; - } - while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_DR)) - ; - - c = INB(&kgdb_uart->Thr_Rbr); - return(c); -} diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c deleted file mode 100644 index 6fb29c3ff62d..000000000000 --- a/arch/mips/mips-boards/atlas/atlas_int.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Copyright (C) 1999, 2000, 2006 MIPS Technologies, Inc. - * All rights reserved. - * Authors: Carsten Langgaard - * Maciej W. Rozycki - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Routines for generic manipulation of the interrupts found on the MIPS - * Atlas board. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include - -static struct atlas_ictrl_regs *atlas_hw0_icregs; - -#if 0 -#define DEBUG_INT(x...) printk(x) -#else -#define DEBUG_INT(x...) -#endif - -void disable_atlas_irq(unsigned int irq_nr) -{ - atlas_hw0_icregs->intrsten = 1 << (irq_nr - ATLAS_INT_BASE); - iob(); -} - -void enable_atlas_irq(unsigned int irq_nr) -{ - atlas_hw0_icregs->intseten = 1 << (irq_nr - ATLAS_INT_BASE); - iob(); -} - -static void end_atlas_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_atlas_irq(irq); -} - -static struct irq_chip atlas_irq_type = { - .name = "Atlas", - .ack = disable_atlas_irq, - .mask = disable_atlas_irq, - .mask_ack = disable_atlas_irq, - .unmask = enable_atlas_irq, - .eoi = enable_atlas_irq, - .end = end_atlas_irq, -}; - -static inline int ls1bit32(unsigned int x) -{ - int b = 31, s; - - s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s; - s = 8; if (x << 8 == 0) s = 0; b -= s; x <<= s; - s = 4; if (x << 4 == 0) s = 0; b -= s; x <<= s; - s = 2; if (x << 2 == 0) s = 0; b -= s; x <<= s; - s = 1; if (x << 1 == 0) s = 0; b -= s; - - return b; -} - -static inline void atlas_hw0_irqdispatch(void) -{ - unsigned long int_status; - int irq; - - int_status = atlas_hw0_icregs->intstatus; - - /* if int_status == 0, then the interrupt has already been cleared */ - if (unlikely(int_status == 0)) - return; - - irq = ATLAS_INT_BASE + ls1bit32(int_status); - - DEBUG_INT("atlas_hw0_irqdispatch: irq=%d\n", irq); - - do_IRQ(irq); -} - -static inline int clz(unsigned long x) -{ - __asm__( - " .set push \n" - " .set mips32 \n" - " clz %0, %1 \n" - " .set pop \n" - : "=r" (x) - : "r" (x)); - - return x; -} - -/* - * Version of ffs that only looks at bits 12..15. - */ -static inline unsigned int irq_ffs(unsigned int pending) -{ -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - return -clz(pending) + 31 - CAUSEB_IP; -#else - unsigned int a0 = 7; - unsigned int t0; - - t0 = s0 & 0xf000; - t0 = t0 < 1; - t0 = t0 << 2; - a0 = a0 - t0; - s0 = s0 << t0; - - t0 = s0 & 0xc000; - t0 = t0 < 1; - t0 = t0 << 1; - a0 = a0 - t0; - s0 = s0 << t0; - - t0 = s0 & 0x8000; - t0 = t0 < 1; - //t0 = t0 << 2; - a0 = a0 - t0; - //s0 = s0 << t0; - - return a0; -#endif -} - -/* - * IRQs on the Atlas board look basically like (all external interrupt - * sources are combined together on hardware interrupt 0 (MIPS IRQ 2)): - * - * MIPS IRQ Source - * -------- ------ - * 0 Software 0 (reschedule IPI on MT) - * 1 Software 1 (remote call IPI on MT) - * 2 Combined Atlas hardware interrupt (hw0) - * 3 Hardware (ignored) - * 4 Hardware (ignored) - * 5 Hardware (ignored) - * 6 Hardware (ignored) - * 7 R4k timer (what we use) - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Lowest ---- Software 0 - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; - int irq; - - irq = irq_ffs(pending); - - if (irq == MIPSCPU_INT_ATLAS) - atlas_hw0_irqdispatch(); - else if (irq >= 0) - do_IRQ(MIPS_CPU_IRQ_BASE + irq); - else - spurious_interrupt(); -} - -static inline void init_atlas_irqs(int base) -{ - int i; - - atlas_hw0_icregs = (struct atlas_ictrl_regs *) - ioremap(ATLAS_ICTRL_REGS_BASE, - sizeof(struct atlas_ictrl_regs *)); - - /* - * Mask out all interrupt by writing "1" to all bit position in - * the interrupt reset reg. - */ - atlas_hw0_icregs->intrsten = 0xffffffff; - - for (i = ATLAS_INT_BASE; i <= ATLAS_INT_END; i++) - set_irq_chip_and_handler(i, &atlas_irq_type, handle_level_irq); -} - -static struct irqaction atlasirq = { - .handler = no_action, - .name = "Atlas cascade" -}; - -msc_irqmap_t __initdata msc_irqmap[] = { - {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0}, - {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0}, -}; -int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap); - -msc_irqmap_t __initdata msc_eicirqmap[] = { - {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_ATLAS, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0}, - {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} -}; -int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); - -void __init arch_init_irq(void) -{ - init_atlas_irqs(ATLAS_INT_BASE); - - if (!cpu_has_veic) - mips_cpu_irq_init(); - - switch(mips_revision_corid) { - case MIPS_REVISION_CORID_CORE_MSC: - case MIPS_REVISION_CORID_CORE_FPGA2: - case MIPS_REVISION_CORID_CORE_FPGA3: - case MIPS_REVISION_CORID_CORE_FPGA4: - case MIPS_REVISION_CORID_CORE_24K: - case MIPS_REVISION_CORID_CORE_EMUL_MSC: - if (cpu_has_veic) - init_msc_irqs(MSC01E_INT_BASE, MSC01E_INT_BASE, - msc_eicirqmap, msc_nr_eicirqs); - else - init_msc_irqs(MSC01E_INT_BASE, MSC01C_INT_BASE, - msc_irqmap, msc_nr_irqs); - } - - if (cpu_has_veic) { - set_vi_handler(MSC01E_INT_ATLAS, atlas_hw0_irqdispatch); - setup_irq(MSC01E_INT_BASE + MSC01E_INT_ATLAS, &atlasirq); - } else if (cpu_has_vint) { - set_vi_handler(MIPSCPU_INT_ATLAS, atlas_hw0_irqdispatch); -#ifdef CONFIG_MIPS_MT_SMTC - setup_irq_smtc(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, - &atlasirq, (0x100 << MIPSCPU_INT_ATLAS)); -#else /* Not SMTC */ - setup_irq(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, &atlasirq); -#endif /* CONFIG_MIPS_MT_SMTC */ - } else - setup_irq(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, &atlasirq); -} diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c deleted file mode 100644 index 5c500802271e..000000000000 --- a/arch/mips/mips-boards/atlas/atlas_setup.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static void __init serial_init(void); - -const char *get_system_type(void) -{ - return "MIPS Atlas"; -} - -const char display_string[] = " LINUX ON ATLAS "; - -void __init plat_mem_setup(void) -{ - mips_pcibios_init(); - - ioport_resource.end = 0x7fffffff; - - serial_init(); - -#ifdef CONFIG_KGDB - kgdb_config(); -#endif - mips_reboot_setup(); -} - -static void __init serial_init(void) -{ -#ifdef CONFIG_SERIAL_8250 - struct uart_port s; - - memset(&s, 0, sizeof(s)); - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - s.iobase = ATLAS_UART_REGS_BASE; -#else - s.iobase = ATLAS_UART_REGS_BASE+3; -#endif - s.irq = ATLAS_INT_UART; - s.uartclk = ATLAS_BASE_BAUD * 16; - s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ; - s.iotype = UPIO_PORT; - s.regshift = 3; - - if (early_serial_setup(&s) != 0) { - printk(KERN_ERR "Serial setup failed!\n"); - } -#endif -} diff --git a/arch/mips/mips-boards/generic/console.c b/arch/mips/mips-boards/generic/console.c index 4d8ab99e4155..4a2aecc6da1b 100644 --- a/arch/mips/mips-boards/generic/console.c +++ b/arch/mips/mips-boards/generic/console.c @@ -22,16 +22,7 @@ #include #include -#ifdef CONFIG_MIPS_ATLAS -#include - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define PORT(offset) (ATLAS_UART_REGS_BASE + ((offset)<<3)) -#else -#define PORT(offset) (ATLAS_UART_REGS_BASE + 3 + ((offset)<<3)) -#endif - -#elif defined(CONFIG_MIPS_SEAD) +#if defined(CONFIG_MIPS_SEAD) #include diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c index 83b9dc739203..bac23b5fbf3f 100644 --- a/arch/mips/mips-boards/generic/init.c +++ b/arch/mips/mips-boards/generic/init.c @@ -197,14 +197,6 @@ void __init kgdb_config(void) while ((c = *++argptr) && ('0' <= c && c <= '9')) speed = speed * 10 + c - '0'; } -#ifdef CONFIG_MIPS_ATLAS - if (line == 1) { - speed = saa9730_kgdb_hook(speed); - generic_putDebugChar = saa9730_putDebugChar; - generic_getDebugChar = saa9730_getDebugChar; - } - else -#endif { speed = rs_kgdb_hook(line, speed); generic_putDebugChar = rs_putDebugChar; diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c index 583d468d98a9..5f73ff6180eb 100644 --- a/arch/mips/mips-boards/generic/reset.c +++ b/arch/mips/mips-boards/generic/reset.c @@ -27,15 +27,9 @@ #include #include #include -#if defined(CONFIG_MIPS_ATLAS) -#include -#endif static void mips_machine_restart(char *command); static void mips_machine_halt(void); -#if defined(CONFIG_MIPS_ATLAS) -static void atlas_machine_power_off(void); -#endif static void mips_machine_restart(char *command) { @@ -53,22 +47,11 @@ static void mips_machine_halt(void) __raw_writel(GORESET, softres_reg); } -#if defined(CONFIG_MIPS_ATLAS) -static void atlas_machine_power_off(void) -{ - unsigned int __iomem *psustby_reg = ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int)); - - writew(ATLAS_GOSTBY, psustby_reg); -} -#endif void mips_reboot_setup(void) { _machine_restart = mips_machine_restart; _machine_halt = mips_machine_halt; -#if defined(CONFIG_MIPS_ATLAS) - pm_power_off = atlas_machine_power_off; -#endif #if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD) pm_power_off = mips_machine_halt; #endif diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index fe2cac1b4514..d224267846b0 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -42,9 +42,6 @@ #include #include -#ifdef CONFIG_MIPS_ATLAS -#include -#endif #ifdef CONFIG_MIPS_MALTA #include #endif @@ -89,7 +86,7 @@ static unsigned int __init estimate_cpu_frequency(void) else count = 6000000; #endif -#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA) +#ifdef CONFIG_MIPS_MALTA unsigned long flags; unsigned int start; diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index ed0c07622baa..80fa5abb25d4 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -21,7 +21,6 @@ obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o # obj-$(CONFIG_BASLER_EXCITE) += ops-titan.o pci-excite.o fixup-excite.o obj-$(CONFIG_LASAT) += pci-lasat.o -obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c deleted file mode 100644 index 506e883a8c71..000000000000 --- a/arch/mips/pci/fixup-atlas.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. - * Author: Maciej W. Rozycki - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include - -#include - -#define PCIA ATLAS_INT_PCIA -#define PCIB ATLAS_INT_PCIB -#define PCIC ATLAS_INT_PCIC -#define PCID ATLAS_INT_PCID -#define INTA ATLAS_INT_INTA -#define INTB ATLAS_INT_INTB -#define ETH ATLAS_INT_ETH -#define INTC ATLAS_INT_INTC -#define SCSI ATLAS_INT_SCSI -#define INTD ATLAS_INT_INTD - -static char irq_tab[][5] __initdata = { - /* INTA INTB INTC INTD */ - {0, 0, 0, 0, 0 }, /* 0: Unused */ - {0, 0, 0, 0, 0 }, /* 1: Unused */ - {0, 0, 0, 0, 0 }, /* 2: Unused */ - {0, 0, 0, 0, 0 }, /* 3: Unused */ - {0, 0, 0, 0, 0 }, /* 4: Unused */ - {0, 0, 0, 0, 0 }, /* 5: Unused */ - {0, 0, 0, 0, 0 }, /* 6: Unused */ - {0, 0, 0, 0, 0 }, /* 7: Unused */ - {0, 0, 0, 0, 0 }, /* 8: Unused */ - {0, 0, 0, 0, 0 }, /* 9: Unused */ - {0, 0, 0, 0, 0 }, /* 10: Unused */ - {0, 0, 0, 0, 0 }, /* 11: Unused */ - {0, 0, 0, 0, 0 }, /* 12: Unused */ - {0, 0, 0, 0, 0 }, /* 13: Unused */ - {0, 0, 0, 0, 0 }, /* 14: Unused */ - {0, PCIA, PCIB, PCIC, PCID }, /* 15: cPCI (behind 21150) */ - {0, SCSI, 0, 0, 0 }, /* 16: SYM53C810A SCSI */ - {0, 0, 0, 0, 0 }, /* 17: Core */ - {0, INTA, INTB, INTC, INTD }, /* 18: PCI Slot */ - {0, ETH, 0, 0, 0 }, /* 19: SAA9730 Eth. et al. */ - {0, 0, 0, 0, 0 }, /* 20: Unused */ - {0, 0, 0, 0, 0 } /* 21: Unused */ -}; - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return irq_tab[slot][pin]; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} - -#ifdef CONFIG_KGDB -/* - * The PCI scan may have moved the saa9730 I/O address, so reread - * the address here. - * This does mean that it's not possible to debug the PCI bus configuration - * code, but it is better than nothing... - */ - -static void atlas_saa9730_base_fixup(struct pci_dev *pdev) -{ - extern void *saa9730_base; - if (pdev->bus == 0 && PCI_SLOT(pdev->devfn) == 19) - (void) pci_read_config_dword(pdev, 0x14, (u32 *)&saa9730_base); - printk("saa9730_base = %x\n", saa9730_base); -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9730, - atlas_saa9730_base_fixup); - -#endif -- cgit v1.2.3 From 1398ddb2ebdb41e8efe6ba42505fd452704c8405 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:33 +0100 Subject: [MIPS] SEAD: Remove support code. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 20 - arch/mips/Makefile | 8 - arch/mips/configs/bcm47xx_defconfig | 1 - arch/mips/configs/bigsur_defconfig | 1 - arch/mips/configs/capcella_defconfig | 1 - arch/mips/configs/cobalt_defconfig | 1 - arch/mips/configs/db1000_defconfig | 1 - arch/mips/configs/db1100_defconfig | 1 - arch/mips/configs/db1200_defconfig | 1 - arch/mips/configs/db1500_defconfig | 1 - arch/mips/configs/db1550_defconfig | 1 - arch/mips/configs/decstation_defconfig | 1 - arch/mips/configs/e55_defconfig | 1 - arch/mips/configs/emma2rh_defconfig | 1 - arch/mips/configs/excite_defconfig | 1 - arch/mips/configs/fulong_defconfig | 1 - arch/mips/configs/ip22_defconfig | 1 - arch/mips/configs/ip27_defconfig | 1 - arch/mips/configs/ip28_defconfig | 1 - arch/mips/configs/ip32_defconfig | 1 - arch/mips/configs/jazz_defconfig | 1 - arch/mips/configs/jmr3927_defconfig | 1 - arch/mips/configs/lasat_defconfig | 1 - arch/mips/configs/malta_defconfig | 1 - arch/mips/configs/mipssim_defconfig | 1 - arch/mips/configs/mpc30x_defconfig | 1 - arch/mips/configs/msp71xx_defconfig | 1 - arch/mips/configs/mtx1_defconfig | 1 - arch/mips/configs/pb1100_defconfig | 1 - arch/mips/configs/pb1500_defconfig | 1 - arch/mips/configs/pb1550_defconfig | 1 - arch/mips/configs/pnx8550-jbs_defconfig | 1 - arch/mips/configs/pnx8550-stb810_defconfig | 1 - arch/mips/configs/rbhma4200_defconfig | 1 - arch/mips/configs/rbhma4500_defconfig | 1 - arch/mips/configs/rm200_defconfig | 1 - arch/mips/configs/sb1250-swarm_defconfig | 1 - arch/mips/configs/sead_defconfig | 641 ----------------------------- arch/mips/configs/tb0219_defconfig | 1 - arch/mips/configs/tb0226_defconfig | 1 - arch/mips/configs/tb0287_defconfig | 1 - arch/mips/configs/workpad_defconfig | 1 - arch/mips/configs/wrppmc_defconfig | 1 - arch/mips/configs/yosemite_defconfig | 1 - arch/mips/mips-boards/generic/console.c | 12 - arch/mips/mips-boards/generic/init.c | 4 - arch/mips/mips-boards/generic/reset.c | 2 +- arch/mips/mips-boards/generic/time.c | 5 +- arch/mips/mips-boards/sead/Makefile | 28 -- arch/mips/mips-boards/sead/sead_int.c | 117 ------ arch/mips/mips-boards/sead/sead_setup.c | 77 ---- 51 files changed, 2 insertions(+), 953 deletions(-) delete mode 100644 arch/mips/configs/sead_defconfig delete mode 100644 arch/mips/mips-boards/sead/Makefile delete mode 100644 arch/mips/mips-boards/sead/sead_int.c delete mode 100644 arch/mips/mips-boards/sead/sead_setup.c (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 6383c700686c..a0381427ec5c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -217,26 +217,6 @@ config MIPS_MALTA This enables support for the MIPS Technologies Malta evaluation board. -config MIPS_SEAD - bool "MIPS SEAD board" - select CEVT_R4K - select CSRC_R4K - select IRQ_CPU - select DMA_NONCOHERENT - select SYS_HAS_EARLY_PRINTK - select MIPS_BOARDS_GEN - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_HAS_CPU_MIPS64_R1 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_SMARTMIPS - help - This enables support for the MIPS Technologies SEAD evaluation - board. - config MIPS_SIM bool 'MIPS simulator (MIPSsim)' select CEVT_R4K diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 9bc2c763909f..800a73db822a 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -317,14 +317,6 @@ cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-mips load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 all-$(CONFIG_MIPS_MALTA) := vmlinux.bin -# -# MIPS SEAD board -# -core-$(CONFIG_MIPS_SEAD) += arch/mips/mips-boards/sead/ -cflags-$(CONFIG_MIPS_SEAD) += -Iinclude/asm-mips/mach-mips -load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000 -all-$(CONFIG_MIPS_SEAD) := vmlinux.srec - # # MIPS SIM # diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig index 10d83e4aca58..d8694332b344 100644 --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -17,7 +17,6 @@ CONFIG_BCM47XX=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index a9926861f14c..a3bbbf067a3b 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index ee8a7fc99f54..185df23fd460 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index ce31a47f1a15..2678b7ec3351 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS_COBALT=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index f99b6f8c9788..ebb8ad62b3a3 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 0d6ba9e65ff5..ad4e5ef65592 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index 0c6f2a469f09..d0dc2e83ad35 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_DB1200=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 02db28f5dc03..9155082313c8 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index a0f19f2e7d59..e4e324422cd9 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_DB1550=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index c1ab8a21bb07..9e65e6a2dcb3 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y CONFIG_MACH_DECSTATION=y # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 88c2420bc627..1bd84d42b14f 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig index 03f0baad1b67..634bb4eaf132 100644 --- a/arch/mips/configs/emma2rh_defconfig +++ b/arch/mips/configs/emma2rh_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 873597a4aaf1..3572e80356d2 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -28,7 +28,6 @@ CONFIG_BASLER_EXCITE=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig index 13e1ef2240ea..620980081a30 100644 --- a/arch/mips/configs/fulong_defconfig +++ b/arch/mips/configs/fulong_defconfig @@ -15,7 +15,6 @@ CONFIG_LEMOTE_FULONG=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 7daf203c1481..cc8e6bf2b245 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -16,7 +16,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 83d769f941d6..138c575a0151 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig index 3c5090a248b7..822b01f643e3 100644 --- a/arch/mips/configs/ip28_defconfig +++ b/arch/mips/configs/ip28_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index f8d1cf3e8749..fe4699df9626 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index 72ff710c878f..bbacc35d804f 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set CONFIG_MACH_JAZZ=y # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 8dc8bef471b4..92000a3a871d 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig index a8fa2055c071..bc9159fda728 100644 --- a/arch/mips/configs/lasat_defconfig +++ b/arch/mips/configs/lasat_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y CONFIG_LASAT=y # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 9a8ed74cc1a9..55288cf50b72 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -16,7 +16,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set CONFIG_MIPS_MALTA=y -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index 1d205446ee70..2c0a6314e901 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set CONFIG_MIPS_SIM=y # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 0c7f35acb702..8c720e51795b 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index 2dd2a4f38fbe..59d19472b161 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 17d66526fa48..bacf0dd0e345 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -15,7 +15,6 @@ CONFIG_MACH_ALCHEMY=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index eaf608ca65a6..6dfe6f793cef 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index 62c5a7098ab1..c965a87e6a96 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 29c8548b68f7..0778996c682f 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index c714f43e7dc8..37c7b5ffd474 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index c1adcfac6c54..893e5c4ab66d 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig index 9e1083626292..f89482a2aa6b 100644 --- a/arch/mips/configs/rbhma4200_defconfig +++ b/arch/mips/configs/rbhma4200_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 462a652ee022..70cf69761673 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 2562f355dbf1..0f4da0325ea4 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index ff89765f87f7..1ea97865f2ce 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig deleted file mode 100644 index d3db59bf399b..000000000000 --- a/arch/mips/configs/sead_defconfig +++ /dev/null @@ -1,641 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Sun Feb 18 21:28:10 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_SEAD=y -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_MIPS_BOARDS_GEN=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_CPU_MIPS64_R1=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPSR1=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y -# CONFIG_CPU_HAS_SMARTMIPS is not set -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_SYS_SUPPORTS_SMARTMIPS=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_UTS_NS is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -# CONFIG_NET is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=18432 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# Misc devices -# - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_RAID_ATTRS=y -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# ISDN subsystem -# - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=y -# CONFIG_CRC32 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index 34ce11de5367..b5059881bc7e 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index e5ae6b1839b2..b06a716bf23f 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 2fdfd6659ef1..46512cf7ce04 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index ee411216d373..b437eb7f8672 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index 66d3c11a0382..fc2c56731b98 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set CONFIG_WR_PPMC=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index daa4e48a7232..7f86c43d1bda 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/mips-boards/generic/console.c b/arch/mips/mips-boards/generic/console.c index 4a2aecc6da1b..43bcfb4f8167 100644 --- a/arch/mips/mips-boards/generic/console.c +++ b/arch/mips/mips-boards/generic/console.c @@ -22,21 +22,9 @@ #include #include -#if defined(CONFIG_MIPS_SEAD) - -#include - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define PORT(offset) (SEAD_UART0_REGS_BASE + ((offset)<<3)) -#else -#define PORT(offset) (SEAD_UART0_REGS_BASE + 3 + ((offset)<<3)) -#endif - -#else #define PORT(offset) (0x3f8 + (offset)) -#endif static inline unsigned int serial_in(int offset) { diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c index bac23b5fbf3f..c0653021a171 100644 --- a/arch/mips/mips-boards/generic/init.c +++ b/arch/mips/mips-boards/generic/init.c @@ -252,9 +252,6 @@ void __init prom_init(void) mips_display_message("LINUX"); -#ifdef CONFIG_MIPS_SEAD - set_io_port_base(KSEG1); -#else /* * early setup of _pcictrl_bonito so that we can determine * the system controller on a CORE_EMUL board @@ -406,7 +403,6 @@ void __init prom_init(void) mips_display_message("SC Error"); while (1); /* We die here... */ } -#endif board_nmi_handler_setup = mips_nmi_setup; board_ejtag_handler_setup = mips_ejtag_setup; diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c index 5f73ff6180eb..ea932b843962 100644 --- a/arch/mips/mips-boards/generic/reset.c +++ b/arch/mips/mips-boards/generic/reset.c @@ -52,7 +52,7 @@ void mips_reboot_setup(void) { _machine_restart = mips_machine_restart; _machine_halt = mips_machine_halt; -#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD) +#ifdef CONFIG_MIPS_MALTA pm_power_off = mips_machine_halt; #endif } diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index d224267846b0..637897e8e4fb 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -45,9 +45,6 @@ #ifdef CONFIG_MIPS_MALTA #include #endif -#ifdef CONFIG_MIPS_SEAD -#include -#endif unsigned long cpu_khz; @@ -73,7 +70,7 @@ static unsigned int __init estimate_cpu_frequency(void) unsigned int prid = read_c0_prid() & 0xffff00; unsigned int count; -#if defined(CONFIG_MIPS_SEAD) || defined(CONFIG_MIPS_SIM) +#ifdef CONFIG_MIPS_SIM /* * The SEAD board doesn't have a real time clock, so we can't * really calculate the timer frequency diff --git a/arch/mips/mips-boards/sead/Makefile b/arch/mips/mips-boards/sead/Makefile deleted file mode 100644 index 3682fe217bd5..000000000000 --- a/arch/mips/mips-boards/sead/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. -# -# ######################################################################## -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# ####################################################################### -# -# Makefile for the MIPS SEAD specific kernel interface routines -# under Linux. -# - -obj-y := sead_int.o sead_setup.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c deleted file mode 100644 index ec6dd194c14a..000000000000 --- a/arch/mips/mips-boards/sead/sead_int.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. - * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2004 Maciej W. Rozycki - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Routines for generic manipulation of the interrupts found on the MIPS - * Sead board. - */ -#include -#include - -#include -#include -#include - -#include - -static inline int clz(unsigned long x) -{ - __asm__( - " .set push \n" - " .set mips32 \n" - " clz %0, %1 \n" - " .set pop \n" - : "=r" (x) - : "r" (x)); - - return x; -} - -/* - * Version of ffs that only looks at bits 12..15. - */ -static inline unsigned int irq_ffs(unsigned int pending) -{ -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - return -clz(pending) + 31 - CAUSEB_IP; -#else - unsigned int a0 = 7; - unsigned int t0; - - t0 = s0 & 0xf000; - t0 = t0 < 1; - t0 = t0 << 2; - a0 = a0 - t0; - s0 = s0 << t0; - - t0 = s0 & 0xc000; - t0 = t0 < 1; - t0 = t0 << 1; - a0 = a0 - t0; - s0 = s0 << t0; - - t0 = s0 & 0x8000; - t0 = t0 < 1; - //t0 = t0 << 2; - a0 = a0 - t0; - //s0 = s0 << t0; - - return a0; -#endif -} - -/* - * IRQs on the SEAD board look basically are combined together on hardware - * interrupt 0 (MIPS IRQ 2)) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 UART0 (hw0) - * 3 UART1 (hw1) - * 4 Hardware (ignored) - * 5 Hardware (ignored) - * 6 Hardware (ignored) - * 7 R4k timer (what we use) - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Lowest ---- Combined hardware interrupt - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; - int irq; - - irq = irq_ffs(pending); - - if (irq >= 0) - do_IRQ(MIPS_CPU_IRQ_BASE + irq); - else - spurious_interrupt(); -} - -void __init arch_init_irq(void) -{ - mips_cpu_irq_init(); -} diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c deleted file mode 100644 index 8aa8e5b7b074..000000000000 --- a/arch/mips/mips-boards/sead/sead_setup.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * SEAD specific setup. - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -static void __init serial_init(void); - -const char *get_system_type(void) -{ - return "MIPS SEAD"; -} - -const char display_string[] = " LINUX ON SEAD "; - -void __init plat_mem_setup(void) -{ - ioport_resource.end = 0x7fffffff; - - serial_init(); - - mips_reboot_setup(); -} - -static void __init serial_init(void) -{ -#ifdef CONFIG_SERIAL_8250 - struct uart_port s; - - memset(&s, 0, sizeof(s)); - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - s.iobase = SEAD_UART0_REGS_BASE; -#else - s.iobase = SEAD_UART0_REGS_BASE+3; -#endif - s.irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_UART0; - s.uartclk = SEAD_BASE_BAUD * 16; - s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ; - s.iotype = UPIO_PORT; - s.regshift = 3; - - if (early_serial_setup(&s) != 0) { - printk(KERN_ERR "Serial setup failed!\n"); - } -#endif -} -- cgit v1.2.3 From 6da5e30b879394f0c55b2bbf3353d797097c8f0f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:34 +0100 Subject: [MIPS] Remove impossible ifdef and code wrapped by it. Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/time.c | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 637897e8e4fb..744dbfc6e484 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -70,19 +70,6 @@ static unsigned int __init estimate_cpu_frequency(void) unsigned int prid = read_c0_prid() & 0xffff00; unsigned int count; -#ifdef CONFIG_MIPS_SIM - /* - * The SEAD board doesn't have a real time clock, so we can't - * really calculate the timer frequency - * For now we hardwire the SEAD board frequency to 12MHz. - */ - - if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) || - (prid == (PRID_COMP_MIPS | PRID_IMP_25KF))) - count = 12000000; - else - count = 6000000; -#endif #ifdef CONFIG_MIPS_MALTA unsigned long flags; unsigned int start; -- cgit v1.2.3 From d5deda6fa1ca434d36c2daffb63127e92c6470f5 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:34 +0100 Subject: [MIPS] MSC01: Cleanup configuration. This shouldn't depend on CONFIG_MIPS_BOARDS_GEN which is about to go away. Signed-off-by: Ralf Baechle --- arch/mips/kernel/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 48ae915b38e0..0fd31974ba28 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -60,7 +60,7 @@ obj-$(CONFIG_I8259) += i8259.o obj-$(CONFIG_IRQ_CPU) += irq_cpu.o obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o obj-$(CONFIG_IRQ_CPU_RM9K) += irq-rm9000.o -obj-$(CONFIG_MIPS_BOARDS_GEN) += irq-msc01.o +obj-$(CONFIG_MIPS_MSC) += irq-msc01.o obj-$(CONFIG_IRQ_TXX9) += irq_txx9.o obj-$(CONFIG_IRQ_GT641XX) += irq-gt641xx.o obj-$(CONFIG_IRQ_GIC) += irq-gic.o -- cgit v1.2.3 From eda49eeebf263f3a34f6968959fc2e4825b42beb Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:34 +0100 Subject: [MIPS] Remove always true ifdef conditions. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 8 ++------ arch/mips/configs/malta_defconfig | 1 - arch/mips/mips-boards/generic/memory.c | 6 ------ arch/mips/mips-boards/generic/reset.c | 2 -- arch/mips/mips-boards/generic/time.c | 4 ---- 5 files changed, 2 insertions(+), 19 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 800a73db822a..ed8821ac8a8e 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -304,15 +304,11 @@ core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/ load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000 cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote -# -# For all MIPS, Inc. eval boards -# -core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/ - # # MIPS Malta board # -core-$(CONFIG_MIPS_MALTA) += arch/mips/mips-boards/malta/ +core-$(CONFIG_MIPS_MALTA) += arch/mips/mips-boards/generic/ \ + arch/mips/mips-boards/malta/ cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-mips load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 all-$(CONFIG_MIPS_MALTA) := vmlinux.bin diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 55288cf50b72..74daa0cf87e6 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -66,7 +66,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y -CONFIG_MIPS_BOARDS_GEN=y CONFIG_PCI_GT64XXX_PCI0=y CONFIG_SWAP_IO_SPACE=y CONFIG_BOOT_ELF32=y diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c index 5e443bba5662..61888ff72c87 100644 --- a/arch/mips/mips-boards/generic/memory.c +++ b/arch/mips/mips-boards/generic/memory.c @@ -97,7 +97,6 @@ static struct prom_pmemblock * __init prom_getmdesc(void) mdesc[1].base = 0x00001000; mdesc[1].size = 0x000ef000; -#ifdef CONFIG_MIPS_MALTA /* * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the * south bridge and PCI access always forwarded to the ISA Bus and @@ -108,11 +107,6 @@ static struct prom_pmemblock * __init prom_getmdesc(void) mdesc[2].type = yamon_dontuse; mdesc[2].base = 0x000f0000; mdesc[2].size = 0x00010000; -#else - mdesc[2].type = yamon_prom; - mdesc[2].base = 0x000f0000; - mdesc[2].size = 0x00010000; -#endif mdesc[3].type = yamon_dontuse; mdesc[3].base = 0x00100000; diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c index ea932b843962..42dee4da37ba 100644 --- a/arch/mips/mips-boards/generic/reset.c +++ b/arch/mips/mips-boards/generic/reset.c @@ -52,7 +52,5 @@ void mips_reboot_setup(void) { _machine_restart = mips_machine_restart; _machine_halt = mips_machine_halt; -#ifdef CONFIG_MIPS_MALTA pm_power_off = mips_machine_halt; -#endif } diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 744dbfc6e484..0b97d47691fc 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -42,9 +42,7 @@ #include #include -#ifdef CONFIG_MIPS_MALTA #include -#endif unsigned long cpu_khz; @@ -70,7 +68,6 @@ static unsigned int __init estimate_cpu_frequency(void) unsigned int prid = read_c0_prid() & 0xffff00; unsigned int count; -#ifdef CONFIG_MIPS_MALTA unsigned long flags; unsigned int start; @@ -91,7 +88,6 @@ static unsigned int __init estimate_cpu_frequency(void) /* restore interrupts */ local_irq_restore(flags); -#endif mips_hpt_frequency = count; if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && -- cgit v1.2.3 From 315806cb19f9d375dccbc2d60fa14e16afdcd5ac Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:34 +0100 Subject: [MIPS] Malta: Cleanup organization of code into directories. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 5 +- arch/mips/mips-boards/generic/Makefile | 29 -- arch/mips/mips-boards/generic/amon.c | 80 --- arch/mips/mips-boards/generic/cmdline.c | 59 --- arch/mips/mips-boards/generic/console.c | 47 -- arch/mips/mips-boards/generic/display.c | 64 --- arch/mips/mips-boards/generic/gdb_hook.c | 133 ----- arch/mips/mips-boards/generic/init.c | 424 ---------------- arch/mips/mips-boards/generic/memory.c | 177 ------- arch/mips/mips-boards/generic/pci.c | 243 --------- arch/mips/mips-boards/generic/reset.c | 56 --- arch/mips/mips-boards/generic/time.c | 163 ------ arch/mips/mips-boards/malta/Makefile | 27 - arch/mips/mips-boards/malta/malta_int.c | 712 --------------------------- arch/mips/mips-boards/malta/malta_mtd.c | 63 --- arch/mips/mips-boards/malta/malta_platform.c | 65 --- arch/mips/mips-boards/malta/malta_setup.c | 229 --------- arch/mips/mips-boards/malta/malta_smtc.c | 154 ------ arch/mips/mti-malta/Makefile | 21 + arch/mips/mti-malta/malta-amon.c | 80 +++ arch/mips/mti-malta/malta-cmdline.c | 59 +++ arch/mips/mti-malta/malta-console.c | 47 ++ arch/mips/mti-malta/malta-display.c | 64 +++ arch/mips/mti-malta/malta-init.c | 424 ++++++++++++++++ arch/mips/mti-malta/malta-int.c | 712 +++++++++++++++++++++++++++ arch/mips/mti-malta/malta-kgdb.c | 133 +++++ arch/mips/mti-malta/malta-memory.c | 177 +++++++ arch/mips/mti-malta/malta-mtd.c | 63 +++ arch/mips/mti-malta/malta-pci.c | 243 +++++++++ arch/mips/mti-malta/malta-platform.c | 65 +++ arch/mips/mti-malta/malta-reset.c | 56 +++ arch/mips/mti-malta/malta-setup.c | 229 +++++++++ arch/mips/mti-malta/malta-smtc.c | 154 ++++++ arch/mips/mti-malta/malta-time.c | 163 ++++++ 34 files changed, 2692 insertions(+), 2728 deletions(-) delete mode 100644 arch/mips/mips-boards/generic/Makefile delete mode 100644 arch/mips/mips-boards/generic/amon.c delete mode 100644 arch/mips/mips-boards/generic/cmdline.c delete mode 100644 arch/mips/mips-boards/generic/console.c delete mode 100644 arch/mips/mips-boards/generic/display.c delete mode 100644 arch/mips/mips-boards/generic/gdb_hook.c delete mode 100644 arch/mips/mips-boards/generic/init.c delete mode 100644 arch/mips/mips-boards/generic/memory.c delete mode 100644 arch/mips/mips-boards/generic/pci.c delete mode 100644 arch/mips/mips-boards/generic/reset.c delete mode 100644 arch/mips/mips-boards/generic/time.c delete mode 100644 arch/mips/mips-boards/malta/Makefile delete mode 100644 arch/mips/mips-boards/malta/malta_int.c delete mode 100644 arch/mips/mips-boards/malta/malta_mtd.c delete mode 100644 arch/mips/mips-boards/malta/malta_platform.c delete mode 100644 arch/mips/mips-boards/malta/malta_setup.c delete mode 100644 arch/mips/mips-boards/malta/malta_smtc.c create mode 100644 arch/mips/mti-malta/Makefile create mode 100644 arch/mips/mti-malta/malta-amon.c create mode 100644 arch/mips/mti-malta/malta-cmdline.c create mode 100644 arch/mips/mti-malta/malta-console.c create mode 100644 arch/mips/mti-malta/malta-display.c create mode 100644 arch/mips/mti-malta/malta-init.c create mode 100644 arch/mips/mti-malta/malta-int.c create mode 100644 arch/mips/mti-malta/malta-kgdb.c create mode 100644 arch/mips/mti-malta/malta-memory.c create mode 100644 arch/mips/mti-malta/malta-mtd.c create mode 100644 arch/mips/mti-malta/malta-pci.c create mode 100644 arch/mips/mti-malta/malta-platform.c create mode 100644 arch/mips/mti-malta/malta-reset.c create mode 100644 arch/mips/mti-malta/malta-setup.c create mode 100644 arch/mips/mti-malta/malta-smtc.c create mode 100644 arch/mips/mti-malta/malta-time.c (limited to 'arch/mips') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index ed8821ac8a8e..36aa690484c8 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -307,9 +307,8 @@ cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote # # MIPS Malta board # -core-$(CONFIG_MIPS_MALTA) += arch/mips/mips-boards/generic/ \ - arch/mips/mips-boards/malta/ -cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-mips +core-$(CONFIG_MIPS_MALTA) += arch/mips/mti-malta/ +cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-malta load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 all-$(CONFIG_MIPS_MALTA) := vmlinux.bin diff --git a/arch/mips/mips-boards/generic/Makefile b/arch/mips/mips-boards/generic/Makefile deleted file mode 100644 index f7f87fc09d1e..000000000000 --- a/arch/mips/mips-boards/generic/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# Makefile for the MIPS boards generic routines under Linux. -# - -obj-y := reset.o display.o init.o memory.o \ - cmdline.o time.o -obj-y += amon.o - -obj-$(CONFIG_EARLY_PRINTK) += console.o -obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_KGDB) += gdb_hook.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mips-boards/generic/amon.c deleted file mode 100644 index 96236bf33838..000000000000 --- a/arch/mips/mips-boards/generic/amon.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Copyright (C) 2007 MIPS Technologies, Inc. - * All rights reserved. - - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Arbitrary Monitor interface - */ - -#include -#include -#include - -#include -#include -#include - -int amon_cpu_avail(int cpu) -{ - struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); - - if (cpu < 0 || cpu >= NCPULAUNCH) { - pr_debug("avail: cpu%d is out of range\n", cpu); - return 0; - } - - launch += cpu; - if (!(launch->flags & LAUNCH_FREADY)) { - pr_debug("avail: cpu%d is not ready\n", cpu); - return 0; - } - if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) { - pr_debug("avail: too late.. cpu%d is already gone\n", cpu); - return 0; - } - - return 1; -} - -void amon_cpu_start(int cpu, - unsigned long pc, unsigned long sp, - unsigned long gp, unsigned long a0) -{ - volatile struct cpulaunch *launch = - (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); - - if (!amon_cpu_avail(cpu)) - return; - if (cpu == smp_processor_id()) { - pr_debug("launch: I am cpu%d!\n", cpu); - return; - } - launch += cpu; - - pr_debug("launch: starting cpu%d\n", cpu); - - launch->pc = pc; - launch->gp = gp; - launch->sp = sp; - launch->a0 = a0; - - /* Make sure target sees parameters before the go bit */ - smp_mb(); - - launch->flags |= LAUNCH_FGO; - while ((launch->flags & LAUNCH_FGONE) == 0) - ; - pr_debug("launch: cpu%d gone!\n", cpu); -} diff --git a/arch/mips/mips-boards/generic/cmdline.c b/arch/mips/mips-boards/generic/cmdline.c deleted file mode 100644 index 1871c30ed2eb..000000000000 --- a/arch/mips/mips-boards/generic/cmdline.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Kernel command line creation using the prom monitor (YAMON) argc/argv. - */ -#include -#include - -#include - -extern int prom_argc; -extern int *_prom_argv; - -/* - * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. - * This macro take care of sign extension. - */ -#define prom_argv(index) ((char *)(long)_prom_argv[(index)]) - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - - -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { - strcpy(cp, prom_argv(actr)); - cp += strlen(prom_argv(actr)); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) { - /* get rid of trailing space */ - --cp; - *cp = '\0'; - } -} diff --git a/arch/mips/mips-boards/generic/console.c b/arch/mips/mips-boards/generic/console.c deleted file mode 100644 index 43bcfb4f8167..000000000000 --- a/arch/mips/mips-boards/generic/console.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Putting things on the screen/serial line using YAMONs facilities. - */ -#include -#include -#include -#include - - -#define PORT(offset) (0x3f8 + (offset)) - - -static inline unsigned int serial_in(int offset) -{ - return inb(PORT(offset)); -} - -static inline void serial_out(int offset, int value) -{ - outb(value, PORT(offset)); -} - -int prom_putchar(char c) -{ - while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0) - ; - - serial_out(UART_TX, c); - - return 1; -} diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mips-boards/generic/display.c deleted file mode 100644 index 7c8828fcb0ad..000000000000 --- a/arch/mips/mips-boards/generic/display.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Display routines for display messages in MIPS boards ascii display. - */ - -#include -#include -#include -#include -#include - -extern const char display_string[]; -static unsigned int display_count; -static unsigned int max_display_count; - -void mips_display_message(const char *str) -{ - static unsigned int __iomem *display = NULL; - int i; - - if (unlikely(display == NULL)) - display = ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int)); - - for (i = 0; i <= 14; i=i+2) { - if (*str) - __raw_writel(*str++, display + i); - else - __raw_writel(' ', display + i); - } -} - -static void scroll_display_message(unsigned long data); -static DEFINE_TIMER(mips_scroll_timer, scroll_display_message, HZ, 0); - -static void scroll_display_message(unsigned long data) -{ - mips_display_message(&display_string[display_count++]); - if (display_count == max_display_count) - display_count = 0; - - mod_timer(&mips_scroll_timer, jiffies + HZ); -} - -void mips_scroll_message(void) -{ - del_timer_sync(&mips_scroll_timer); - max_display_count = strlen(display_string) + 1 - 8; - mod_timer(&mips_scroll_timer, jiffies + 1); -} diff --git a/arch/mips/mips-boards/generic/gdb_hook.c b/arch/mips/mips-boards/generic/gdb_hook.c deleted file mode 100644 index 6a1854de4579..000000000000 --- a/arch/mips/mips-boards/generic/gdb_hook.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * This is the interface to the remote debugger stub. - */ -#include -#include -#include -#include - -#include -#include - -static struct serial_state rs_table[] = { - SERIAL_PORT_DFNS /* Defined in serial.h */ -}; - -static struct async_struct kdb_port_info = {0}; - -int (*generic_putDebugChar)(char); -char (*generic_getDebugChar)(void); - -static __inline__ unsigned int serial_in(struct async_struct *info, int offset) -{ - return inb(info->port + offset); -} - -static __inline__ void serial_out(struct async_struct *info, int offset, - int value) -{ - outb(value, info->port+offset); -} - -int rs_kgdb_hook(int tty_no, int speed) { - int t; - struct serial_state *ser = &rs_table[tty_no]; - - kdb_port_info.state = ser; - kdb_port_info.magic = SERIAL_MAGIC; - kdb_port_info.port = ser->port; - kdb_port_info.flags = ser->flags; - - /* - * Clear all interrupts - */ - serial_in(&kdb_port_info, UART_LSR); - serial_in(&kdb_port_info, UART_RX); - serial_in(&kdb_port_info, UART_IIR); - serial_in(&kdb_port_info, UART_MSR); - - /* - * Now, initialize the UART - */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */ - if (kdb_port_info.flags & ASYNC_FOURPORT) { - kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS; - t = UART_MCR_DTR | UART_MCR_OUT1; - } else { - kdb_port_info.MCR - = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; - t = UART_MCR_DTR | UART_MCR_RTS; - } - - kdb_port_info.MCR = t; /* no interrupts, please */ - serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR); - - /* - * and set the speed of the serial port - */ - if (speed == 0) - speed = 9600; - - t = kdb_port_info.state->baud_base / speed; - /* set DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB); - serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */ - serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */ - /* reset DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); - - return speed; -} - -int putDebugChar(char c) -{ - return generic_putDebugChar(c); -} - -char getDebugChar(void) -{ - return generic_getDebugChar(); -} - -int rs_putDebugChar(char c) -{ - - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0) - ; - - serial_out(&kdb_port_info, UART_TX, c); - - return 1; -} - -char rs_getDebugChar(void) -{ - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while (!(serial_in(&kdb_port_info, UART_LSR) & 1)) - ; - - return serial_in(&kdb_port_info, UART_RX); -} diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c deleted file mode 100644 index c0653021a171..000000000000 --- a/arch/mips/mips-boards/generic/init.c +++ /dev/null @@ -1,424 +0,0 @@ -/* - * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. - * All rights reserved. - * Authors: Carsten Langgaard - * Maciej W. Rozycki - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * PROM library initialisation code. - */ -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -#ifdef CONFIG_KGDB -extern int rs_kgdb_hook(int, int); -extern int rs_putDebugChar(char); -extern char rs_getDebugChar(void); -extern int saa9730_kgdb_hook(int); -extern int saa9730_putDebugChar(char); -extern char saa9730_getDebugChar(void); -#endif - -int prom_argc; -int *_prom_argv, *_prom_envp; - -/* - * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. - * This macro take care of sign extension, if running in 64-bit mode. - */ -#define prom_envp(index) ((char *)(long)_prom_envp[(index)]) - -int init_debug = 0; - -int mips_revision_corid; -int mips_revision_sconid; - -/* Bonito64 system controller register base. */ -unsigned long _pcictrl_bonito; -unsigned long _pcictrl_bonito_pcicfg; - -/* GT64120 system controller register base */ -unsigned long _pcictrl_gt64120; - -/* MIPS System controller register base */ -unsigned long _pcictrl_msc; - -char *prom_getenv(char *envname) -{ - /* - * Return a pointer to the given environment variable. - * In 64-bit mode: we're using 64-bit pointers, but all pointers - * in the PROM structures are only 32-bit, so we need some - * workarounds, if we are running in 64-bit mode. - */ - int i, index=0; - - i = strlen(envname); - - while (prom_envp(index)) { - if(strncmp(envname, prom_envp(index), i) == 0) { - return(prom_envp(index+1)); - } - index += 2; - } - - return NULL; -} - -static inline unsigned char str2hexnum(unsigned char c) -{ - if (c >= '0' && c <= '9') - return c - '0'; - if (c >= 'a' && c <= 'f') - return c - 'a' + 10; - return 0; /* foo */ -} - -static inline void str2eaddr(unsigned char *ea, unsigned char *str) -{ - int i; - - for (i = 0; i < 6; i++) { - unsigned char num; - - if((*str == '.') || (*str == ':')) - str++; - num = str2hexnum(*str++) << 4; - num |= (str2hexnum(*str++)); - ea[i] = num; - } -} - -int get_ethernet_addr(char *ethernet_addr) -{ - char *ethaddr_str; - - ethaddr_str = prom_getenv("ethaddr"); - if (!ethaddr_str) { - printk("ethaddr not set in boot prom\n"); - return -1; - } - str2eaddr(ethernet_addr, ethaddr_str); - - if (init_debug > 1) { - int i; - printk("get_ethernet_addr: "); - for (i=0; i<5; i++) - printk("%02x:", (unsigned char)*(ethernet_addr+i)); - printk("%02x\n", *(ethernet_addr+i)); - } - - return 0; -} - -#ifdef CONFIG_SERIAL_8250_CONSOLE -static void __init console_config(void) -{ - char console_string[40]; - int baud = 0; - char parity = '\0', bits = '\0', flow = '\0'; - char *s; - - if ((strstr(prom_getcmdline(), "console=")) == NULL) { - s = prom_getenv("modetty0"); - if (s) { - while (*s >= '0' && *s <= '9') - baud = baud*10 + *s++ - '0'; - if (*s == ',') s++; - if (*s) parity = *s++; - if (*s == ',') s++; - if (*s) bits = *s++; - if (*s == ',') s++; - if (*s == 'h') flow = 'r'; - } - if (baud == 0) - baud = 38400; - if (parity != 'n' && parity != 'o' && parity != 'e') - parity = 'n'; - if (bits != '7' && bits != '8') - bits = '8'; - if (flow == '\0') - flow = 'r'; - sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, parity, bits, flow); - strcat(prom_getcmdline(), console_string); - pr_info("Config serial console:%s\n", console_string); - } -} -#endif - -#ifdef CONFIG_KGDB -void __init kgdb_config(void) -{ - extern int (*generic_putDebugChar)(char); - extern char (*generic_getDebugChar)(void); - char *argptr; - int line, speed; - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { - argptr += strlen("kgdb=ttyS"); - if (*argptr != '0' && *argptr != '1') - printk("KGDB: Unknown serial line /dev/ttyS%c, " - "falling back to /dev/ttyS1\n", *argptr); - line = *argptr == '0' ? 0 : 1; - printk("KGDB: Using serial line /dev/ttyS%d for session\n", line); - - speed = 0; - if (*++argptr == ',') - { - int c; - while ((c = *++argptr) && ('0' <= c && c <= '9')) - speed = speed * 10 + c - '0'; - } - { - speed = rs_kgdb_hook(line, speed); - generic_putDebugChar = rs_putDebugChar; - generic_getDebugChar = rs_getDebugChar; - } - - pr_info("KGDB: Using serial line /dev/ttyS%d at %d for " - "session, please connect your debugger\n", - line ? 1 : 0, speed); - - { - char *s; - for (s = "Please connect GDB to this port\r\n"; *s; ) - generic_putDebugChar(*s++); - } - - /* Breakpoint is invoked after interrupts are initialised */ - } -} -#endif - -static void __init mips_nmi_setup(void) -{ - void *base; - extern char except_vec_nmi; - - base = cpu_has_veic ? - (void *)(CAC_BASE + 0xa80) : - (void *)(CAC_BASE + 0x380); - memcpy(base, &except_vec_nmi, 0x80); - flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); -} - -static void __init mips_ejtag_setup(void) -{ - void *base; - extern char except_vec_ejtag_debug; - - base = cpu_has_veic ? - (void *)(CAC_BASE + 0xa00) : - (void *)(CAC_BASE + 0x300); - memcpy(base, &except_vec_ejtag_debug, 0x80); - flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); -} - -extern struct plat_smp_ops msmtc_smp_ops; - -void __init prom_init(void) -{ - prom_argc = fw_arg0; - _prom_argv = (int *) fw_arg1; - _prom_envp = (int *) fw_arg2; - - mips_display_message("LINUX"); - - /* - * early setup of _pcictrl_bonito so that we can determine - * the system controller on a CORE_EMUL board - */ - _pcictrl_bonito = (unsigned long)ioremap(BONITO_REG_BASE, BONITO_REG_SIZE); - - mips_revision_corid = MIPS_REVISION_CORID; - - if (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL) { - if (BONITO_PCIDID == 0x0001df53 || - BONITO_PCIDID == 0x0003df53) - mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_BON; - else - mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_MSC; - } - - mips_revision_sconid = MIPS_REVISION_SCONID; - if (mips_revision_sconid == MIPS_REVISION_SCON_OTHER) { - switch (mips_revision_corid) { - case MIPS_REVISION_CORID_QED_RM5261: - case MIPS_REVISION_CORID_CORE_LV: - case MIPS_REVISION_CORID_CORE_FPGA: - case MIPS_REVISION_CORID_CORE_FPGAR2: - mips_revision_sconid = MIPS_REVISION_SCON_GT64120; - break; - case MIPS_REVISION_CORID_CORE_EMUL_BON: - case MIPS_REVISION_CORID_BONITO64: - case MIPS_REVISION_CORID_CORE_20K: - mips_revision_sconid = MIPS_REVISION_SCON_BONITO; - break; - case MIPS_REVISION_CORID_CORE_MSC: - case MIPS_REVISION_CORID_CORE_FPGA2: - case MIPS_REVISION_CORID_CORE_24K: - /* - * SOCit/ROCit support is essentially identical - * but make an attempt to distinguish them - */ - mips_revision_sconid = MIPS_REVISION_SCON_SOCIT; - break; - case MIPS_REVISION_CORID_CORE_FPGA3: - case MIPS_REVISION_CORID_CORE_FPGA4: - case MIPS_REVISION_CORID_CORE_FPGA5: - case MIPS_REVISION_CORID_CORE_EMUL_MSC: - default: - /* See above */ - mips_revision_sconid = MIPS_REVISION_SCON_ROCIT; - break; - } - } - - switch (mips_revision_sconid) { - u32 start, map, mask, data; - - case MIPS_REVISION_SCON_GT64120: - /* - * Setup the North bridge to do Master byte-lane swapping - * when running in bigendian. - */ - _pcictrl_gt64120 = (unsigned long)ioremap(MIPS_GT_BASE, 0x2000); - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - GT_WRITE(GT_PCI0_CMD_OFS, GT_PCI0_CMD_MBYTESWAP_BIT | - GT_PCI0_CMD_SBYTESWAP_BIT); -#else - GT_WRITE(GT_PCI0_CMD_OFS, 0); -#endif - /* Fix up PCI I/O mapping if necessary (for Atlas). */ - start = GT_READ(GT_PCI0IOLD_OFS); - map = GT_READ(GT_PCI0IOREMAP_OFS); - if ((start & map) != 0) { - map &= ~start; - GT_WRITE(GT_PCI0IOREMAP_OFS, map); - } - - set_io_port_base(MALTA_GT_PORT_BASE); - break; - - case MIPS_REVISION_SCON_BONITO: - _pcictrl_bonito_pcicfg = (unsigned long)ioremap(BONITO_PCICFG_BASE, BONITO_PCICFG_SIZE); - - /* - * Disable Bonito IOBC. - */ - BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & - ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | - BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); - - /* - * Setup the North bridge to do Master byte-lane swapping - * when running in bigendian. - */ -#ifdef CONFIG_CPU_LITTLE_ENDIAN - BONITO_BONGENCFG = BONITO_BONGENCFG & - ~(BONITO_BONGENCFG_MSTRBYTESWAP | - BONITO_BONGENCFG_BYTESWAP); -#else - BONITO_BONGENCFG = BONITO_BONGENCFG | - BONITO_BONGENCFG_MSTRBYTESWAP | - BONITO_BONGENCFG_BYTESWAP; -#endif - - set_io_port_base(MALTA_BONITO_PORT_BASE); - break; - - case MIPS_REVISION_SCON_SOCIT: - case MIPS_REVISION_SCON_ROCIT: - _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000); - mips_pci_controller: - mb(); - MSC_READ(MSC01_PCI_CFG, data); - MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT); - wmb(); - - /* Fix up lane swapping. */ -#ifdef CONFIG_CPU_LITTLE_ENDIAN - MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP); -#else - MSC_WRITE(MSC01_PCI_SWAP, - MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_IO_SHF | - MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF | - MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF); -#endif - /* Fix up target memory mapping. */ - MSC_READ(MSC01_PCI_BAR0, mask); - MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK); - - /* Don't handle target retries indefinitely. */ - if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) == - MSC01_PCI_CFG_MAXRTRY_MSK) - data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK << - MSC01_PCI_CFG_MAXRTRY_SHF)) | - ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) << - MSC01_PCI_CFG_MAXRTRY_SHF); - - wmb(); - MSC_WRITE(MSC01_PCI_CFG, data); - mb(); - - set_io_port_base(MALTA_MSC_PORT_BASE); - break; - - case MIPS_REVISION_SCON_SOCITSC: - case MIPS_REVISION_SCON_SOCITSCP: - _pcictrl_msc = (unsigned long)ioremap(MIPS_SOCITSC_PCI_REG_BASE, 0x2000); - goto mips_pci_controller; - - default: - /* Unknown system controller */ - mips_display_message("SC Error"); - while (1); /* We die here... */ - } - board_nmi_handler_setup = mips_nmi_setup; - board_ejtag_handler_setup = mips_ejtag_setup; - - pr_info("\nLINUX started...\n"); - prom_init_cmdline(); - prom_meminit(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - console_config(); -#endif -#ifdef CONFIG_MIPS_CMP - register_smp_ops(&cmp_smp_ops); -#endif -#ifdef CONFIG_MIPS_MT_SMP - register_smp_ops(&vsmp_smp_ops); -#endif -#ifdef CONFIG_MIPS_MT_SMTC - register_smp_ops(&msmtc_smp_ops); -#endif -} diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c deleted file mode 100644 index 61888ff72c87..000000000000 --- a/arch/mips/mips-boards/generic/memory.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * PROM library functions for acquiring/using memory descriptors given to - * us from the YAMON. - */ -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -/*#define DEBUG*/ - -enum yamon_memtypes { - yamon_dontuse, - yamon_prom, - yamon_free, -}; -static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; - -#ifdef DEBUG -static char *mtypes[3] = { - "Dont use memory", - "YAMON PROM memory", - "Free memmory", -}; -#endif - -/* determined physical memory size, not overridden by command line args */ -unsigned long physical_memsize = 0L; - -static struct prom_pmemblock * __init prom_getmdesc(void) -{ - char *memsize_str; - unsigned int memsize; - char cmdline[CL_SIZE], *ptr; - - /* otherwise look in the environment */ - memsize_str = prom_getenv("memsize"); - if (!memsize_str) { - printk(KERN_WARNING - "memsize not set in boot prom, set to default (32Mb)\n"); - physical_memsize = 0x02000000; - } else { -#ifdef DEBUG - pr_debug("prom_memsize = %s\n", memsize_str); -#endif - physical_memsize = simple_strtol(memsize_str, NULL, 0); - } - -#ifdef CONFIG_CPU_BIG_ENDIAN - /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last - word of physical memory */ - physical_memsize -= PAGE_SIZE; -#endif - - /* Check the command line for a memsize directive that overrides - the physical/default amount */ - strcpy(cmdline, arcs_cmdline); - ptr = strstr(cmdline, "memsize="); - if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) - ptr = strstr(ptr, " memsize="); - - if (ptr) - memsize = memparse(ptr + 8, &ptr); - else - memsize = physical_memsize; - - memset(mdesc, 0, sizeof(mdesc)); - - mdesc[0].type = yamon_dontuse; - mdesc[0].base = 0x00000000; - mdesc[0].size = 0x00001000; - - mdesc[1].type = yamon_prom; - mdesc[1].base = 0x00001000; - mdesc[1].size = 0x000ef000; - - /* - * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the - * south bridge and PCI access always forwarded to the ISA Bus and - * BIOSCS# is always generated. - * This mean that this area can't be used as DMA memory for PCI - * devices. - */ - mdesc[2].type = yamon_dontuse; - mdesc[2].base = 0x000f0000; - mdesc[2].size = 0x00010000; - - mdesc[3].type = yamon_dontuse; - mdesc[3].base = 0x00100000; - mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - mdesc[3].base; - - mdesc[4].type = yamon_free; - mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end)); - mdesc[4].size = memsize - mdesc[4].base; - - return &mdesc[0]; -} - -static int __init prom_memtype_classify(unsigned int type) -{ - switch (type) { - case yamon_free: - return BOOT_MEM_RAM; - case yamon_prom: - return BOOT_MEM_ROM_DATA; - default: - return BOOT_MEM_RESERVED; - } -} - -void __init prom_meminit(void) -{ - struct prom_pmemblock *p; - -#ifdef DEBUG - pr_debug("YAMON MEMORY DESCRIPTOR dump:\n"); - p = prom_getmdesc(); - while (p->size) { - int i = 0; - pr_debug("[%d,%p]: base<%08lx> size<%08lx> type<%s>\n", - i, p, p->base, p->size, mtypes[p->type]); - p++; - i++; - } -#endif - p = prom_getmdesc(); - - while (p->size) { - long type; - unsigned long base, size; - - type = prom_memtype_classify(p->type); - base = p->base; - size = p->size; - - add_memory_region(base, size, type); - p++; - } -} - -void __init prom_free_prom_memory(void) -{ - unsigned long addr; - int i; - - for (i = 0; i < boot_mem_map.nr_map; i++) { - if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) - continue; - - addr = boot_mem_map.map[i].addr; - free_init_pages("prom memory", - addr, addr + boot_mem_map.map[i].size); - } -} diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c deleted file mode 100644 index b9743190609a..000000000000 --- a/arch/mips/mips-boards/generic/pci.c +++ /dev/null @@ -1,243 +0,0 @@ -/* - * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. - * All rights reserved. - * Authors: Carsten Langgaard - * Maciej W. Rozycki - * - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * MIPS boards specific PCI support. - */ -#include -#include -#include -#include - -#include - -#include -#include -#include - -static struct resource bonito64_mem_resource = { - .name = "Bonito PCI MEM", - .flags = IORESOURCE_MEM, -}; - -static struct resource bonito64_io_resource = { - .name = "Bonito PCI I/O", - .start = 0x00000000UL, - .end = 0x000fffffUL, - .flags = IORESOURCE_IO, -}; - -static struct resource gt64120_mem_resource = { - .name = "GT-64120 PCI MEM", - .flags = IORESOURCE_MEM, -}; - -static struct resource gt64120_io_resource = { - .name = "GT-64120 PCI I/O", - .flags = IORESOURCE_IO, -}; - -static struct resource msc_mem_resource = { - .name = "MSC PCI MEM", - .flags = IORESOURCE_MEM, -}; - -static struct resource msc_io_resource = { - .name = "MSC PCI I/O", - .flags = IORESOURCE_IO, -}; - -extern struct pci_ops bonito64_pci_ops; -extern struct pci_ops gt64xxx_pci0_ops; -extern struct pci_ops msc_pci_ops; - -static struct pci_controller bonito64_controller = { - .pci_ops = &bonito64_pci_ops, - .io_resource = &bonito64_io_resource, - .mem_resource = &bonito64_mem_resource, - .io_offset = 0x00000000UL, -}; - -static struct pci_controller gt64120_controller = { - .pci_ops = >64xxx_pci0_ops, - .io_resource = >64120_io_resource, - .mem_resource = >64120_mem_resource, -}; - -static struct pci_controller msc_controller = { - .pci_ops = &msc_pci_ops, - .io_resource = &msc_io_resource, - .mem_resource = &msc_mem_resource, -}; - -void __init mips_pcibios_init(void) -{ - struct pci_controller *controller; - resource_size_t start, end, map, start1, end1, map1, map2, map3, mask; - - switch (mips_revision_sconid) { - case MIPS_REVISION_SCON_GT64120: - /* - * Due to a bug in the Galileo system controller, we need - * to setup the PCI BAR for the Galileo internal registers. - * This should be done in the bios/bootprom and will be - * fixed in a later revision of YAMON (the MIPS boards - * boot prom). - */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, - (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | /* Local bus */ - (0 << GT_PCI0_CFGADDR_DEVNUM_SHF) | /* GT64120 dev */ - (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | /* Function 0*/ - ((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) | /* BAR 4*/ - GT_PCI0_CFGADDR_CONFIGEN_BIT); - - /* Perform the write */ - GT_WRITE(GT_PCI0_CFGDATA_OFS, CPHYSADDR(MIPS_GT_BASE)); - - /* Set up resource ranges from the controller's registers. */ - start = GT_READ(GT_PCI0M0LD_OFS); - end = GT_READ(GT_PCI0M0HD_OFS); - map = GT_READ(GT_PCI0M0REMAP_OFS); - end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK); - start1 = GT_READ(GT_PCI0M1LD_OFS); - end1 = GT_READ(GT_PCI0M1HD_OFS); - map1 = GT_READ(GT_PCI0M1REMAP_OFS); - end1 = (end1 & GT_PCI_HD_MSK) | (start1 & ~GT_PCI_HD_MSK); - /* Cannot support multiple windows, use the wider. */ - if (end1 - start1 > end - start) { - start = start1; - end = end1; - map = map1; - } - mask = ~(start ^ end); - /* We don't support remapping with a discontiguous mask. */ - BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && - mask != ~((mask & -mask) - 1)); - gt64120_mem_resource.start = start; - gt64120_mem_resource.end = end; - gt64120_controller.mem_offset = (start & mask) - (map & mask); - /* Addresses are 36-bit, so do shifts in the destinations. */ - gt64120_mem_resource.start <<= GT_PCI_DCRM_SHF; - gt64120_mem_resource.end <<= GT_PCI_DCRM_SHF; - gt64120_mem_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1; - gt64120_controller.mem_offset <<= GT_PCI_DCRM_SHF; - - start = GT_READ(GT_PCI0IOLD_OFS); - end = GT_READ(GT_PCI0IOHD_OFS); - map = GT_READ(GT_PCI0IOREMAP_OFS); - end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK); - mask = ~(start ^ end); - /* We don't support remapping with a discontiguous mask. */ - BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && - mask != ~((mask & -mask) - 1)); - gt64120_io_resource.start = map & mask; - gt64120_io_resource.end = (map & mask) | ~mask; - gt64120_controller.io_offset = 0; - /* Addresses are 36-bit, so do shifts in the destinations. */ - gt64120_io_resource.start <<= GT_PCI_DCRM_SHF; - gt64120_io_resource.end <<= GT_PCI_DCRM_SHF; - gt64120_io_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1; - - controller = >64120_controller; - break; - - case MIPS_REVISION_SCON_BONITO: - /* Set up resource ranges from the controller's registers. */ - map = BONITO_PCIMAP; - map1 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO0) >> - BONITO_PCIMAP_PCIMAP_LO0_SHIFT; - map2 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO1) >> - BONITO_PCIMAP_PCIMAP_LO1_SHIFT; - map3 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO2) >> - BONITO_PCIMAP_PCIMAP_LO2_SHIFT; - /* Combine as many adjacent windows as possible. */ - map = map1; - start = BONITO_PCILO0_BASE; - end = 1; - if (map3 == map2 + 1) { - map = map2; - start = BONITO_PCILO1_BASE; - end++; - } - if (map2 == map1 + 1) { - map = map1; - start = BONITO_PCILO0_BASE; - end++; - } - bonito64_mem_resource.start = start; - bonito64_mem_resource.end = start + - BONITO_PCIMAP_WINBASE(end) - 1; - bonito64_controller.mem_offset = start - - BONITO_PCIMAP_WINBASE(map); - - controller = &bonito64_controller; - break; - - case MIPS_REVISION_SCON_SOCIT: - case MIPS_REVISION_SCON_ROCIT: - case MIPS_REVISION_SCON_SOCITSC: - case MIPS_REVISION_SCON_SOCITSCP: - /* Set up resource ranges from the controller's registers. */ - MSC_READ(MSC01_PCI_SC2PMBASL, start); - MSC_READ(MSC01_PCI_SC2PMMSKL, mask); - MSC_READ(MSC01_PCI_SC2PMMAPL, map); - msc_mem_resource.start = start & mask; - msc_mem_resource.end = (start & mask) | ~mask; - msc_controller.mem_offset = (start & mask) - (map & mask); - - MSC_READ(MSC01_PCI_SC2PIOBASL, start); - MSC_READ(MSC01_PCI_SC2PIOMSKL, mask); - MSC_READ(MSC01_PCI_SC2PIOMAPL, map); - msc_io_resource.start = map & mask; - msc_io_resource.end = (map & mask) | ~mask; - msc_controller.io_offset = 0; - ioport_resource.end = ~mask; - - /* If ranges overlap I/O takes precedence. */ - start = start & mask; - end = start | ~mask; - if ((start >= msc_mem_resource.start && - start <= msc_mem_resource.end) || - (end >= msc_mem_resource.start && - end <= msc_mem_resource.end)) { - /* Use the larger space. */ - start = max(start, msc_mem_resource.start); - end = min(end, msc_mem_resource.end); - if (start - msc_mem_resource.start >= - msc_mem_resource.end - end) - msc_mem_resource.end = start - 1; - else - msc_mem_resource.start = end + 1; - } - - controller = &msc_controller; - break; - default: - return; - } - - if (controller->io_resource->start < 0x00001000UL) /* FIXME */ - controller->io_resource->start = 0x00001000UL; - - iomem_resource.end &= 0xfffffffffULL; /* 64 GB */ - ioport_resource.end = controller->io_resource->end; - - register_pci_controller(controller); -} diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c deleted file mode 100644 index 42dee4da37ba..000000000000 --- a/arch/mips/mips-boards/generic/reset.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Reset the MIPS boards. - * - */ -#include - -#include -#include -#include - -static void mips_machine_restart(char *command); -static void mips_machine_halt(void); - -static void mips_machine_restart(char *command) -{ - unsigned int __iomem *softres_reg = - ioremap(SOFTRES_REG, sizeof(unsigned int)); - - __raw_writel(GORESET, softres_reg); -} - -static void mips_machine_halt(void) -{ - unsigned int __iomem *softres_reg = - ioremap(SOFTRES_REG, sizeof(unsigned int)); - - __raw_writel(GORESET, softres_reg); -} - - -void mips_reboot_setup(void) -{ - _machine_restart = mips_machine_restart; - _machine_halt = mips_machine_halt; - pm_power_off = mips_machine_halt; -} diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c deleted file mode 100644 index 0b97d47691fc..000000000000 --- a/arch/mips/mips-boards/generic/time.c +++ /dev/null @@ -1,163 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Setting up the clock on the MIPS boards. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -unsigned long cpu_khz; - -static int mips_cpu_timer_irq; -static int mips_cpu_perf_irq; -extern int cp0_perfcount_irq; - -static void mips_timer_dispatch(void) -{ - do_IRQ(mips_cpu_timer_irq); -} - -static void mips_perf_dispatch(void) -{ - do_IRQ(mips_cpu_perf_irq); -} - -/* - * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect - */ -static unsigned int __init estimate_cpu_frequency(void) -{ - unsigned int prid = read_c0_prid() & 0xffff00; - unsigned int count; - - unsigned long flags; - unsigned int start; - - local_irq_save(flags); - - /* Start counter exactly on falling edge of update flag */ - while (CMOS_READ(RTC_REG_A) & RTC_UIP); - while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - - /* Start r4k counter. */ - start = read_c0_count(); - - /* Read counter exactly on falling edge of update flag */ - while (CMOS_READ(RTC_REG_A) & RTC_UIP); - while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - - count = read_c0_count() - start; - - /* restore interrupts */ - local_irq_restore(flags); - - mips_hpt_frequency = count; - if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && - (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) - count *= 2; - - count += 5000; /* round */ - count -= count%10000; - - return count; -} - -unsigned long read_persistent_clock(void) -{ - return mc146818_get_cmos_time(); -} - -static void __init plat_perf_setup(void) -{ -#ifdef MSC01E_INT_BASE - if (cpu_has_veic) { - set_vi_handler(MSC01E_INT_PERFCTR, mips_perf_dispatch); - mips_cpu_perf_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR; - } else -#endif - if (cp0_perfcount_irq >= 0) { - if (cpu_has_vint) - set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch); - mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq; -#ifdef CONFIG_SMP - set_irq_handler(mips_cpu_perf_irq, handle_percpu_irq); -#endif - } -} - -unsigned int __cpuinit get_c0_compare_int(void) -{ -#ifdef MSC01E_INT_BASE - if (cpu_has_veic) { - set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch); - mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR; - } else -#endif - { - if (cpu_has_vint) - set_vi_handler(cp0_compare_irq, mips_timer_dispatch); - mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; - } - - return mips_cpu_timer_irq; -} - -void __init plat_time_init(void) -{ - unsigned int est_freq; - - /* Set Data mode - binary. */ - CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); - - est_freq = estimate_cpu_frequency(); - - printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, - (est_freq%1000000)*100/1000000); - - cpu_khz = est_freq / 1000; - - mips_scroll_message(); -#ifdef CONFIG_I8253 /* Only Malta has a PIT */ - setup_pit_timer(); -#endif - - plat_perf_setup(); -} diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile deleted file mode 100644 index db4ad654a6d3..000000000000 --- a/arch/mips/mips-boards/malta/Makefile +++ /dev/null @@ -1,27 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# Makefile for the MIPS Malta specific kernel interface routines -# under Linux. -# - -obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o - -# FIXME FIXME FIXME -obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c deleted file mode 100644 index ea176113fea9..000000000000 --- a/arch/mips/mips-boards/malta/malta_int.c +++ /dev/null @@ -1,712 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. - * Copyright (C) 2001 Ralf Baechle - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Routines for generic manipulation of the interrupts found on the MIPS - * Malta board. - * The interrupt controller is located in the South Bridge a PIIX4 device - * with two internal 82C95 interrupt controllers. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -int gcmp_present = -1; -int gic_present; -static unsigned long _msc01_biu_base; -static unsigned long _gcmp_base; -static unsigned int ipi_map[NR_CPUS]; - -static DEFINE_SPINLOCK(mips_irq_lock); - -static inline int mips_pcibios_iack(void) -{ - int irq; - u32 dummy; - - /* - * Determine highest priority pending interrupt by performing - * a PCI Interrupt Acknowledge cycle. - */ - switch (mips_revision_sconid) { - case MIPS_REVISION_SCON_SOCIT: - case MIPS_REVISION_SCON_ROCIT: - case MIPS_REVISION_SCON_SOCITSC: - case MIPS_REVISION_SCON_SOCITSCP: - MSC_READ(MSC01_PCI_IACK, irq); - irq &= 0xff; - break; - case MIPS_REVISION_SCON_GT64120: - irq = GT_READ(GT_PCI0_IACK_OFS); - irq &= 0xff; - break; - case MIPS_REVISION_SCON_BONITO: - /* The following will generate a PCI IACK cycle on the - * Bonito controller. It's a little bit kludgy, but it - * was the easiest way to implement it in hardware at - * the given time. - */ - BONITO_PCIMAP_CFG = 0x20000; - - /* Flush Bonito register block */ - dummy = BONITO_PCIMAP_CFG; - iob(); /* sync */ - - irq = readl((u32 *)_pcictrl_bonito_pcicfg); - iob(); /* sync */ - irq &= 0xff; - BONITO_PCIMAP_CFG = 0; - break; - default: - printk(KERN_WARNING "Unknown system controller.\n"); - return -1; - } - return irq; -} - -static inline int get_int(void) -{ - unsigned long flags; - int irq; - spin_lock_irqsave(&mips_irq_lock, flags); - - irq = mips_pcibios_iack(); - - /* - * The only way we can decide if an interrupt is spurious - * is by checking the 8259 registers. This needs a spinlock - * on an SMP system, so leave it up to the generic code... - */ - - spin_unlock_irqrestore(&mips_irq_lock, flags); - - return irq; -} - -static void malta_hw0_irqdispatch(void) -{ - int irq; - - irq = get_int(); - if (irq < 0) { - /* interrupt has already been cleared */ - return; - } - - do_IRQ(MALTA_INT_BASE + irq); -} - -static void malta_ipi_irqdispatch(void) -{ - int irq; - - irq = gic_get_int(); - if (irq < 0) - return; /* interrupt has already been cleared */ - - do_IRQ(MIPS_GIC_IRQ_BASE + irq); -} - -static void corehi_irqdispatch(void) -{ - unsigned int intedge, intsteer, pcicmd, pcibadaddr; - unsigned int pcimstat, intisr, inten, intpol; - unsigned int intrcause, datalo, datahi; - struct pt_regs *regs = get_irq_regs(); - - printk(KERN_EMERG "CoreHI interrupt, shouldn't happen, we die here!\n"); - printk(KERN_EMERG "epc : %08lx\nStatus: %08lx\n" - "Cause : %08lx\nbadVaddr : %08lx\n", - regs->cp0_epc, regs->cp0_status, - regs->cp0_cause, regs->cp0_badvaddr); - - /* Read all the registers and then print them as there is a - problem with interspersed printk's upsetting the Bonito controller. - Do it for the others too. - */ - - switch (mips_revision_sconid) { - case MIPS_REVISION_SCON_SOCIT: - case MIPS_REVISION_SCON_ROCIT: - case MIPS_REVISION_SCON_SOCITSC: - case MIPS_REVISION_SCON_SOCITSCP: - ll_msc_irq(); - break; - case MIPS_REVISION_SCON_GT64120: - intrcause = GT_READ(GT_INTRCAUSE_OFS); - datalo = GT_READ(GT_CPUERR_ADDRLO_OFS); - datahi = GT_READ(GT_CPUERR_ADDRHI_OFS); - printk(KERN_EMERG "GT_INTRCAUSE = %08x\n", intrcause); - printk(KERN_EMERG "GT_CPUERR_ADDR = %02x%08x\n", - datahi, datalo); - break; - case MIPS_REVISION_SCON_BONITO: - pcibadaddr = BONITO_PCIBADADDR; - pcimstat = BONITO_PCIMSTAT; - intisr = BONITO_INTISR; - inten = BONITO_INTEN; - intpol = BONITO_INTPOL; - intedge = BONITO_INTEDGE; - intsteer = BONITO_INTSTEER; - pcicmd = BONITO_PCICMD; - printk(KERN_EMERG "BONITO_INTISR = %08x\n", intisr); - printk(KERN_EMERG "BONITO_INTEN = %08x\n", inten); - printk(KERN_EMERG "BONITO_INTPOL = %08x\n", intpol); - printk(KERN_EMERG "BONITO_INTEDGE = %08x\n", intedge); - printk(KERN_EMERG "BONITO_INTSTEER = %08x\n", intsteer); - printk(KERN_EMERG "BONITO_PCICMD = %08x\n", pcicmd); - printk(KERN_EMERG "BONITO_PCIBADADDR = %08x\n", pcibadaddr); - printk(KERN_EMERG "BONITO_PCIMSTAT = %08x\n", pcimstat); - break; - } - - die("CoreHi interrupt", regs); -} - -static inline int clz(unsigned long x) -{ - __asm__( - " .set push \n" - " .set mips32 \n" - " clz %0, %1 \n" - " .set pop \n" - : "=r" (x) - : "r" (x)); - - return x; -} - -/* - * Version of ffs that only looks at bits 12..15. - */ -static inline unsigned int irq_ffs(unsigned int pending) -{ -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - return -clz(pending) + 31 - CAUSEB_IP; -#else - unsigned int a0 = 7; - unsigned int t0; - - t0 = pending & 0xf000; - t0 = t0 < 1; - t0 = t0 << 2; - a0 = a0 - t0; - pending = pending << t0; - - t0 = pending & 0xc000; - t0 = t0 < 1; - t0 = t0 << 1; - a0 = a0 - t0; - pending = pending << t0; - - t0 = pending & 0x8000; - t0 = t0 < 1; - /* t0 = t0 << 2; */ - a0 = a0 - t0; - /* pending = pending << t0; */ - - return a0; -#endif -} - -/* - * IRQs on the Malta board look basically (barring software IRQs which we - * don't use at all and all external interrupt sources are combined together - * on hardware interrupt 0 (MIPS IRQ 2)) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Combined hardware interrupt (hw0) - * 3 Hardware (ignored) - * 4 Hardware (ignored) - * 5 Hardware (ignored) - * 6 Hardware (ignored) - * 7 R4k timer (what we use) - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Lowest ---- Combined hardware interrupt - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; - int irq; - - irq = irq_ffs(pending); - - if (irq == MIPSCPU_INT_I8259A) - malta_hw0_irqdispatch(); - else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()])) - malta_ipi_irqdispatch(); - else if (irq >= 0) - do_IRQ(MIPS_CPU_IRQ_BASE + irq); - else - spurious_interrupt(); -} - -#ifdef CONFIG_MIPS_MT_SMP - - -#define GIC_MIPS_CPU_IPI_RESCHED_IRQ 3 -#define GIC_MIPS_CPU_IPI_CALL_IRQ 4 - -#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */ -#define C_RESCHED C_SW0 -#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for resched */ -#define C_CALL C_SW1 -static int cpu_ipi_resched_irq, cpu_ipi_call_irq; - -static void ipi_resched_dispatch(void) -{ - do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ); -} - -static void ipi_call_dispatch(void) -{ - do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ); -} - -static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) -{ - return IRQ_HANDLED; -} - -static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) -{ - smp_call_function_interrupt(); - - return IRQ_HANDLED; -} - -static struct irqaction irq_resched = { - .handler = ipi_resched_interrupt, - .flags = IRQF_DISABLED|IRQF_PERCPU, - .name = "IPI_resched" -}; - -static struct irqaction irq_call = { - .handler = ipi_call_interrupt, - .flags = IRQF_DISABLED|IRQF_PERCPU, - .name = "IPI_call" -}; -#endif /* CONFIG_MIPS_MT_SMP */ - -static struct irqaction i8259irq = { - .handler = no_action, - .name = "XT-PIC cascade" -}; - -static struct irqaction corehi_irqaction = { - .handler = no_action, - .name = "CoreHi" -}; - -static msc_irqmap_t __initdata msc_irqmap[] = { - {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0}, - {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0}, -}; -static int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap); - -static msc_irqmap_t __initdata msc_eicirqmap[] = { - {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_I8259A, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_SMI, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_COREHI, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_CORELO, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0}, - {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} -}; - -static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); - -#if defined(CONFIG_MIPS_MT_SMP) -/* - * This GIC specific tabular array defines the association between External - * Interrupts and CPUs/Core Interrupts. The nature of the External - * Interrupts is also defined here - polarity/trigger. - */ -static struct gic_intr_map gic_intr_map[] = { - { GIC_EXT_INTR(0), X, X, X, X, 0 }, - { GIC_EXT_INTR(1), X, X, X, X, 0 }, - { GIC_EXT_INTR(2), X, X, X, X, 0 }, - { GIC_EXT_INTR(3), 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(4), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(5), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(6), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(7), 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(8), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(9), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(10), X, X, X, X, 0 }, - { GIC_EXT_INTR(11), X, X, X, X, 0 }, - { GIC_EXT_INTR(12), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(15), X, X, X, X, 0 }, - { GIC_EXT_INTR(16), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(17), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(18), 1, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(19), 1, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(20), 2, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(21), 2, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(22), 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(23), 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, -}; -#endif - -/* - * GCMP needs to be detected before any SMP initialisation - */ -static int __init gcmp_probe(unsigned long addr, unsigned long size) -{ - if (gcmp_present >= 0) - return gcmp_present; - - _gcmp_base = (unsigned long) ioremap_nocache(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); - _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ); - gcmp_present = (GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) == GCMP_BASE_ADDR; - - if (gcmp_present) - printk(KERN_DEBUG "GCMP present\n"); - return gcmp_present; -} - -#if defined(CONFIG_MIPS_MT_SMP) -static void __init fill_ipi_map(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) { - if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X)) - ipi_map[gic_intr_map[i].cpunum] |= - (1 << (gic_intr_map[i].pin + 2)); - } -} -#endif - -void __init arch_init_irq(void) -{ - int gic_present, gcmp_present; - - init_i8259_irqs(); - - if (!cpu_has_veic) - mips_cpu_irq_init(); - - gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); - if (gcmp_present) { - GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK; - gic_present = 1; - } else { - _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ); - gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) & - MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF; - } - if (gic_present) - printk(KERN_DEBUG "GIC present\n"); - - switch (mips_revision_sconid) { - case MIPS_REVISION_SCON_SOCIT: - case MIPS_REVISION_SCON_ROCIT: - if (cpu_has_veic) - init_msc_irqs(MIPS_MSC01_IC_REG_BASE, - MSC01E_INT_BASE, msc_eicirqmap, - msc_nr_eicirqs); - else - init_msc_irqs(MIPS_MSC01_IC_REG_BASE, - MSC01C_INT_BASE, msc_irqmap, - msc_nr_irqs); - break; - - case MIPS_REVISION_SCON_SOCITSC: - case MIPS_REVISION_SCON_SOCITSCP: - if (cpu_has_veic) - init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, - MSC01E_INT_BASE, msc_eicirqmap, - msc_nr_eicirqs); - else - init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, - MSC01C_INT_BASE, msc_irqmap, - msc_nr_irqs); - } - - if (cpu_has_veic) { - set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch); - set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch); - setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq); - setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction); - } else if (cpu_has_vint) { - set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch); - set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch); -#ifdef CONFIG_MIPS_MT_SMTC - setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq, - (0x100 << MIPSCPU_INT_I8259A)); - setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, - &corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI)); - /* - * Temporary hack to ensure that the subsidiary device - * interrupts coing in via the i8259A, but associated - * with low IRQ numbers, will restore the Status.IM - * value associated with the i8259A. - */ - { - int i; - - for (i = 0; i < 16; i++) - irq_hwmask[i] = (0x100 << MIPSCPU_INT_I8259A); - } -#else /* Not SMTC */ - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, - &corehi_irqaction); -#endif /* CONFIG_MIPS_MT_SMTC */ - } else { - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, - &corehi_irqaction); - } - -#if defined(CONFIG_MIPS_MT_SMP) - if (gic_present) { - /* FIXME */ - int i; - struct { - unsigned int resched; - unsigned int call; - } ipiirq[] = { - { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE0, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE0}, - { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE1, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE1 - }, { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE2, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE2 - }, { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE3, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3 - } - }; - fill_ipi_map(); - gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); - if (!gcmp_present) { - /* Enable the GIC */ - i = REG(_msc01_biu_base, MSC01_SC_CFG); - REG(_msc01_biu_base, MSC01_SC_CFG) = - (i | (0x1 << MSC01_SC_CFG_GICENA_SHF)); - pr_debug("GIC Enabled\n"); - } - - /* set up ipi interrupts */ - if (cpu_has_vint) { - set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch); - set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch); - } - /* Argh.. this really needs sorting out.. */ - printk("CPU%d: status register was %08x\n", smp_processor_id(), read_c0_status()); - write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4); - printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status()); - write_c0_status(0x1100dc00); - printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); - for (i = 0; i < ARRAY_SIZE(ipiirq); i++) { - setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched); - setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call); - - set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq); - set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq); - } - } else { - /* set up ipi interrupts */ - if (cpu_has_veic) { - set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch); - set_vi_handler (MSC01E_INT_SW1, ipi_call_dispatch); - cpu_ipi_resched_irq = MSC01E_INT_SW0; - cpu_ipi_call_irq = MSC01E_INT_SW1; - } else { - if (cpu_has_vint) { - set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); - set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); - } - cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ; - cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ; - } - - setup_irq(cpu_ipi_resched_irq, &irq_resched); - setup_irq(cpu_ipi_call_irq, &irq_call); - - set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq); - set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq); - } -#endif -} - -void malta_be_init(void) -{ - if (gcmp_present) { - /* Could change CM error mask register */ - } -} - - -static char *tr[8] = { - "mem", "gcr", "gic", "mmio", - "0x04", "0x05", "0x06", "0x07" -}; - -static char *mcmd[32] = { - [0x00] = "0x00", - [0x01] = "Legacy Write", - [0x02] = "Legacy Read", - [0x03] = "0x03", - [0x04] = "0x04", - [0x05] = "0x05", - [0x06] = "0x06", - [0x07] = "0x07", - [0x08] = "Coherent Read Own", - [0x09] = "Coherent Read Share", - [0x0a] = "Coherent Read Discard", - [0x0b] = "Coherent Ready Share Always", - [0x0c] = "Coherent Upgrade", - [0x0d] = "Coherent Writeback", - [0x0e] = "0x0e", - [0x0f] = "0x0f", - [0x10] = "Coherent Copyback", - [0x11] = "Coherent Copyback Invalidate", - [0x12] = "Coherent Invalidate", - [0x13] = "Coherent Write Invalidate", - [0x14] = "Coherent Completion Sync", - [0x15] = "0x15", - [0x16] = "0x16", - [0x17] = "0x17", - [0x18] = "0x18", - [0x19] = "0x19", - [0x1a] = "0x1a", - [0x1b] = "0x1b", - [0x1c] = "0x1c", - [0x1d] = "0x1d", - [0x1e] = "0x1e", - [0x1f] = "0x1f" -}; - -static char *core[8] = { - "Invalid/OK", "Invalid/Data", - "Shared/OK", "Shared/Data", - "Modified/OK", "Modified/Data", - "Exclusive/OK", "Exclusive/Data" -}; - -static char *causes[32] = { - "None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR", - "COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07", - "0x08", "0x09", "0x0a", "0x0b", - "0x0c", "0x0d", "0x0e", "0x0f", - "0x10", "0x11", "0x12", "0x13", - "0x14", "0x15", "0x16", "INTVN_WR_ERR", - "INTVN_RD_ERR", "0x19", "0x1a", "0x1b", - "0x1c", "0x1d", "0x1e", "0x1f" -}; - -int malta_be_handler(struct pt_regs *regs, int is_fixup) -{ - /* This duplicates the handling in do_be which seems wrong */ - int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL; - - if (gcmp_present) { - unsigned long cm_error = GCMPGCB(GCMEC); - unsigned long cm_addr = GCMPGCB(GCMEA); - unsigned long cm_other = GCMPGCB(GCMEO); - unsigned long cause, ocause; - char buf[256]; - - cause = (cm_error & GCMP_GCB_GMEC_ERROR_TYPE_MSK); - if (cause != 0) { - cause >>= GCMP_GCB_GMEC_ERROR_TYPE_SHF; - if (cause < 16) { - unsigned long cca_bits = (cm_error >> 15) & 7; - unsigned long tr_bits = (cm_error >> 12) & 7; - unsigned long mcmd_bits = (cm_error >> 7) & 0x1f; - unsigned long stag_bits = (cm_error >> 3) & 15; - unsigned long sport_bits = (cm_error >> 0) & 7; - - snprintf(buf, sizeof(buf), - "CCA=%lu TR=%s MCmd=%s STag=%lu " - "SPort=%lu\n", - cca_bits, tr[tr_bits], mcmd[mcmd_bits], - stag_bits, sport_bits); - } else { - /* glob state & sresp together */ - unsigned long c3_bits = (cm_error >> 18) & 7; - unsigned long c2_bits = (cm_error >> 15) & 7; - unsigned long c1_bits = (cm_error >> 12) & 7; - unsigned long c0_bits = (cm_error >> 9) & 7; - unsigned long sc_bit = (cm_error >> 8) & 1; - unsigned long mcmd_bits = (cm_error >> 3) & 0x1f; - unsigned long sport_bits = (cm_error >> 0) & 7; - snprintf(buf, sizeof(buf), - "C3=%s C2=%s C1=%s C0=%s SC=%s " - "MCmd=%s SPort=%lu\n", - core[c3_bits], core[c2_bits], - core[c1_bits], core[c0_bits], - sc_bit ? "True" : "False", - mcmd[mcmd_bits], sport_bits); - } - - ocause = (cm_other & GCMP_GCB_GMEO_ERROR_2ND_MSK) >> - GCMP_GCB_GMEO_ERROR_2ND_SHF; - - printk("CM_ERROR=%08lx %s <%s>\n", cm_error, - causes[cause], buf); - printk("CM_ADDR =%08lx\n", cm_addr); - printk("CM_OTHER=%08lx %s\n", cm_other, causes[ocause]); - - /* reprime cause register */ - GCMPGCB(GCMEC) = 0; - } - } - - return retval; -} diff --git a/arch/mips/mips-boards/malta/malta_mtd.c b/arch/mips/mips-boards/malta/malta_mtd.c deleted file mode 100644 index 8ad9bdf25dce..000000000000 --- a/arch/mips/mips-boards/malta/malta_mtd.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 MIPS Technologies, Inc. - * written by Ralf Baechle - */ - -#include -#include -#include -#include -#include - -static struct mtd_partition malta_mtd_partitions[] = { - { - .name = "YAMON", - .offset = 0x0, - .size = 0x100000, - .mask_flags = MTD_WRITEABLE - }, { - .name = "User FS", - .offset = 0x100000, - .size = 0x2e0000 - }, { - .name = "Board Config", - .offset = 0x3e0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE - } -}; - -static struct physmap_flash_data malta_flash_data = { - .width = 4, - .nr_parts = ARRAY_SIZE(malta_mtd_partitions), - .parts = malta_mtd_partitions -}; - -static struct resource malta_flash_resource = { - .start = 0x1e000000, - .end = 0x1e3fffff, - .flags = IORESOURCE_MEM -}; - -static struct platform_device malta_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &malta_flash_data, - }, - .num_resources = 1, - .resource = &malta_flash_resource, -}; - -static int __init malta_mtd_init(void) -{ - platform_device_register(&malta_flash); - - return 0; -} - -module_init(malta_mtd_init) diff --git a/arch/mips/mips-boards/malta/malta_platform.c b/arch/mips/mips-boards/malta/malta_platform.c deleted file mode 100644 index 83b9bab3cd3f..000000000000 --- a/arch/mips/mips-boards/malta/malta_platform.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 MIPS Technologies, Inc. - * written by Ralf Baechle (ralf@linux-mips.org) - * - * Probe driver for the Malta's UART ports: - * - * o 2 ports in the SMC SuperIO - * o 1 port in the CBUS UART, a discrete 16550 which normally is only used - * for bringups. - * - * We don't use 8250_platform.c on Malta as it would result in the CBUS - * UART becoming ttyS0. - */ -#include -#include -#include - -#define SMC_PORT(base, int) \ -{ \ - .iobase = base, \ - .irq = int, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -#define CBUS_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) - -static struct plat_serial8250_port uart8250_data[] = { - SMC_PORT(0x3F8, 4), - SMC_PORT(0x2F8, 3), - { - .mapbase = 0x1f000900, /* The CBUS UART */ - .irq = MIPS_CPU_IRQ_BASE + 2, - .uartclk = 3686400, /* Twice the usual clk! */ - .iotype = UPIO_MEM32, - .flags = CBUS_UART_FLAGS, - .regshift = 3, - }, - { }, -}; - -static struct platform_device uart8250_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, - .dev = { - .platform_data = uart8250_data, - }, -}; - -static int __init uart8250_init(void) -{ - return platform_device_register(&uart8250_device); -} - -module_init(uart8250_init); - -MODULE_AUTHOR("Ralf Baechle "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("8250 UART probe driver for the Malta CBUS UART"); diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c deleted file mode 100644 index e7cad54936ca..000000000000 --- a/arch/mips/mips-boards/malta/malta_setup.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * Copyright (C) 2008 Dmitri Vorobiev - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_VT -#include -#endif - -extern void malta_be_init(void); -extern int malta_be_handler(struct pt_regs *regs, int is_fixup); - -static struct resource standard_io_resources[] = { - { - .name = "dma1", - .start = 0x00, - .end = 0x1f, - .flags = IORESOURCE_BUSY - }, - { - .name = "timer", - .start = 0x40, - .end = 0x5f, - .flags = IORESOURCE_BUSY - }, - { - .name = "keyboard", - .start = 0x60, - .end = 0x6f, - .flags = IORESOURCE_BUSY - }, - { - .name = "dma page reg", - .start = 0x80, - .end = 0x8f, - .flags = IORESOURCE_BUSY - }, - { - .name = "dma2", - .start = 0xc0, - .end = 0xdf, - .flags = IORESOURCE_BUSY - }, -}; - -const char *get_system_type(void) -{ - return "MIPS Malta"; -} - -#if defined(CONFIG_MIPS_MT_SMTC) -const char display_string[] = " SMTC LINUX ON MALTA "; -#else -const char display_string[] = " LINUX ON MALTA "; -#endif /* CONFIG_MIPS_MT_SMTC */ - -#ifdef CONFIG_BLK_DEV_FD -static void __init fd_activate(void) -{ - /* - * Activate Floppy Controller in the SMSC FDC37M817 Super I/O - * Controller. - * Done by YAMON 2.00 onwards - */ - /* Entering config state. */ - SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG); - - /* Activate floppy controller. */ - SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG); - SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG); - SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG); - SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG); - - /* Exit config state. */ - SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG); -} -#endif - -#ifdef CONFIG_BLK_DEV_IDE -static void __init pci_clock_check(void) -{ - unsigned int __iomem *jmpr_p = - (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int)); - int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07; - static const int pciclocks[] __initdata = { - 33, 20, 25, 30, 12, 16, 37, 10 - }; - int pciclock = pciclocks[jmpr]; - char *argptr = prom_getcmdline(); - - if (pciclock != 33 && !strstr(argptr, "idebus=")) { - printk(KERN_WARNING "WARNING: PCI clock is %dMHz, " - "setting idebus\n", pciclock); - argptr += strlen(argptr); - sprintf(argptr, " idebus=%d", pciclock); - if (pciclock < 20 || pciclock > 66) - printk(KERN_WARNING "WARNING: IDE timing " - "calculations will be incorrect\n"); - } -} -#endif - -#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) -static void __init screen_info_setup(void) -{ - screen_info = (struct screen_info) { - .orig_x = 0, - .orig_y = 25, - .ext_mem_k = 0, - .orig_video_page = 0, - .orig_video_mode = 0, - .orig_video_cols = 80, - .unused2 = 0, - .orig_video_ega_bx = 0, - .unused3 = 0, - .orig_video_lines = 25, - .orig_video_isVGA = VIDEO_TYPE_VGAC, - .orig_video_points = 16 - }; -} -#endif - -static void __init bonito_quirks_setup(void) -{ - char *argptr; - - argptr = prom_getcmdline(); - if (strstr(argptr, "debug")) { - BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE; - printk(KERN_INFO "Enabled Bonito debug mode\n"); - } else - BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE; - -#ifdef CONFIG_DMA_COHERENT - if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) { - BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN; - printk(KERN_INFO "Enabled Bonito CPU coherency\n"); - - argptr = prom_getcmdline(); - if (strstr(argptr, "iobcuncached")) { - BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN; - BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & - ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | - BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); - printk(KERN_INFO "Disabled Bonito IOBC coherency\n"); - } else { - BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN; - BONITO_PCIMEMBASECFG |= - (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | - BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); - printk(KERN_INFO "Enabled Bonito IOBC coherency\n"); - } - } else - panic("Hardware DMA cache coherency not supported"); -#endif -} - -void __init plat_mem_setup(void) -{ - unsigned int i; - - mips_pcibios_init(); - - /* Request I/O space for devices used on the Malta board. */ - for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) - request_resource(&ioport_resource, standard_io_resources+i); - - /* - * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge. - */ - enable_dma(4); - -#ifdef CONFIG_KGDB - kgdb_config(); -#endif - -#ifdef CONFIG_DMA_COHERENT - if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO) - panic("Hardware DMA cache coherency not supported"); -#endif - - if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO) - bonito_quirks_setup(); - -#ifdef CONFIG_BLK_DEV_IDE - pci_clock_check(); -#endif - -#ifdef CONFIG_BLK_DEV_FD - fd_activate(); -#endif - -#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) - screen_info_setup(); -#endif - mips_reboot_setup(); - - board_be_init = malta_be_init; - board_be_handler = malta_be_handler; -} diff --git a/arch/mips/mips-boards/malta/malta_smtc.c b/arch/mips/mips-boards/malta/malta_smtc.c deleted file mode 100644 index 5ea705e49454..000000000000 --- a/arch/mips/mips-boards/malta/malta_smtc.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * Malta Platform-specific hooks for SMP operation - */ -#include -#include - -#include -#include -#include -#include - -/* VPE/SMP Prototype implements platform interfaces directly */ - -/* - * Cause the specified action to be performed on a targeted "CPU" - */ - -static void msmtc_send_ipi_single(int cpu, unsigned int action) -{ - /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ - smtc_send_ipi(cpu, LINUX_SMP_IPI, action); -} - -static void msmtc_send_ipi_mask(cpumask_t mask, unsigned int action) -{ - unsigned int i; - - for_each_cpu_mask(i, mask) - msmtc_send_ipi_single(i, action); -} - -/* - * Post-config but pre-boot cleanup entry point - */ -static void __cpuinit msmtc_init_secondary(void) -{ - void smtc_init_secondary(void); - int myvpe; - - /* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */ - myvpe = read_c0_tcbind() & TCBIND_CURVPE; - if (myvpe != 0) { - /* Ideally, this should be done only once per VPE, but... */ - clear_c0_status(ST0_IM); - set_c0_status((0x100 << cp0_compare_irq) - | (0x100 << MIPS_CPU_IPI_IRQ)); - if (cp0_perfcount_irq >= 0) - set_c0_status(0x100 << cp0_perfcount_irq); - } - - smtc_init_secondary(); -} - -/* - * Platform "CPU" startup hook - */ -static void __cpuinit msmtc_boot_secondary(int cpu, struct task_struct *idle) -{ - smtc_boot_secondary(cpu, idle); -} - -/* - * SMP initialization finalization entry point - */ -static void __cpuinit msmtc_smp_finish(void) -{ - smtc_smp_finish(); -} - -/* - * Hook for after all CPUs are online - */ - -static void msmtc_cpus_done(void) -{ -} - -/* - * Platform SMP pre-initialization - * - * As noted above, we can assume a single CPU for now - * but it may be multithreaded. - */ - -static void __init msmtc_smp_setup(void) -{ - mipsmt_build_cpu_map(0); -} - -static void __init msmtc_prepare_cpus(unsigned int max_cpus) -{ - mipsmt_prepare_cpus(); -} - -struct plat_smp_ops msmtc_smp_ops = { - .send_ipi_single = msmtc_send_ipi_single, - .send_ipi_mask = msmtc_send_ipi_mask, - .init_secondary = msmtc_init_secondary, - .smp_finish = msmtc_smp_finish, - .cpus_done = msmtc_cpus_done, - .boot_secondary = msmtc_boot_secondary, - .smp_setup = msmtc_smp_setup, - .prepare_cpus = msmtc_prepare_cpus, -}; - -#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF -/* - * IRQ affinity hook - */ - - -void plat_set_irq_affinity(unsigned int irq, cpumask_t affinity) -{ - cpumask_t tmask = affinity; - int cpu = 0; - void smtc_set_irq_affinity(unsigned int irq, cpumask_t aff); - - /* - * On the legacy Malta development board, all I/O interrupts - * are routed through the 8259 and combined in a single signal - * to the CPU daughterboard, and on the CoreFPGA2/3 34K models, - * that signal is brought to IP2 of both VPEs. To avoid racing - * concurrent interrupt service events, IP2 is enabled only on - * one VPE, by convention VPE0. So long as no bits are ever - * cleared in the affinity mask, there will never be any - * interrupt forwarding. But as soon as a program or operator - * sets affinity for one of the related IRQs, we need to make - * sure that we don't ever try to forward across the VPE boundry, - * at least not until we engineer a system where the interrupt - * _ack() or _end() function can somehow know that it corresponds - * to an interrupt taken on another VPE, and perform the appropriate - * restoration of Status.IM state using MFTR/MTTR instead of the - * normal local behavior. We also ensure that no attempt will - * be made to forward to an offline "CPU". - */ - - for_each_cpu_mask(cpu, affinity) { - if ((cpu_data[cpu].vpe_id != 0) || !cpu_online(cpu)) - cpu_clear(cpu, tmask); - } - irq_desc[irq].affinity = tmask; - - if (cpus_empty(tmask)) - /* - * We could restore a default mask here, but the - * runtime code can anyway deal with the null set - */ - printk(KERN_WARNING - "IRQ affinity leaves no legal CPU for IRQ %d\n", irq); - - /* Do any generic SMTC IRQ affinity setup */ - smtc_set_irq_affinity(irq, tmask); -} -#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile new file mode 100644 index 000000000000..f8064446e812 --- /dev/null +++ b/arch/mips/mti-malta/Makefile @@ -0,0 +1,21 @@ +# +# Carsten Langgaard, carstenl@mips.com +# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. +# +# Copyright (C) 2008 Wind River Systems, Inc. +# written by Ralf Baechle +# +obj-y := malta-amon.o malta-cmdline.o \ + malta-display.o malta-init.o malta-int.o \ + malta-memory.o malta-mtd.o \ + malta-platform.o malta-reset.o \ + malta-setup.o malta-time.o + +obj-$(CONFIG_EARLY_PRINTK) += malta-console.o +obj-$(CONFIG_PCI) += malta-pci.o +obj-$(CONFIG_KGDB) += malta-kgdb.o + +# FIXME FIXME FIXME +obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mti-malta/malta-amon.c b/arch/mips/mti-malta/malta-amon.c new file mode 100644 index 000000000000..96236bf33838 --- /dev/null +++ b/arch/mips/mti-malta/malta-amon.c @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2007 MIPS Technologies, Inc. + * All rights reserved. + + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Arbitrary Monitor interface + */ + +#include +#include +#include + +#include +#include +#include + +int amon_cpu_avail(int cpu) +{ + struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); + + if (cpu < 0 || cpu >= NCPULAUNCH) { + pr_debug("avail: cpu%d is out of range\n", cpu); + return 0; + } + + launch += cpu; + if (!(launch->flags & LAUNCH_FREADY)) { + pr_debug("avail: cpu%d is not ready\n", cpu); + return 0; + } + if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) { + pr_debug("avail: too late.. cpu%d is already gone\n", cpu); + return 0; + } + + return 1; +} + +void amon_cpu_start(int cpu, + unsigned long pc, unsigned long sp, + unsigned long gp, unsigned long a0) +{ + volatile struct cpulaunch *launch = + (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); + + if (!amon_cpu_avail(cpu)) + return; + if (cpu == smp_processor_id()) { + pr_debug("launch: I am cpu%d!\n", cpu); + return; + } + launch += cpu; + + pr_debug("launch: starting cpu%d\n", cpu); + + launch->pc = pc; + launch->gp = gp; + launch->sp = sp; + launch->a0 = a0; + + /* Make sure target sees parameters before the go bit */ + smp_mb(); + + launch->flags |= LAUNCH_FGO; + while ((launch->flags & LAUNCH_FGONE) == 0) + ; + pr_debug("launch: cpu%d gone!\n", cpu); +} diff --git a/arch/mips/mti-malta/malta-cmdline.c b/arch/mips/mti-malta/malta-cmdline.c new file mode 100644 index 000000000000..1871c30ed2eb --- /dev/null +++ b/arch/mips/mti-malta/malta-cmdline.c @@ -0,0 +1,59 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Kernel command line creation using the prom monitor (YAMON) argc/argv. + */ +#include +#include + +#include + +extern int prom_argc; +extern int *_prom_argv; + +/* + * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. + * This macro take care of sign extension. + */ +#define prom_argv(index) ((char *)(long)_prom_argv[(index)]) + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + + +void __init prom_init_cmdline(void) +{ + char *cp; + int actr; + + actr = 1; /* Always ignore argv[0] */ + + cp = &(arcs_cmdline[0]); + while(actr < prom_argc) { + strcpy(cp, prom_argv(actr)); + cp += strlen(prom_argv(actr)); + *cp++ = ' '; + actr++; + } + if (cp != &(arcs_cmdline[0])) { + /* get rid of trailing space */ + --cp; + *cp = '\0'; + } +} diff --git a/arch/mips/mti-malta/malta-console.c b/arch/mips/mti-malta/malta-console.c new file mode 100644 index 000000000000..43bcfb4f8167 --- /dev/null +++ b/arch/mips/mti-malta/malta-console.c @@ -0,0 +1,47 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Putting things on the screen/serial line using YAMONs facilities. + */ +#include +#include +#include +#include + + +#define PORT(offset) (0x3f8 + (offset)) + + +static inline unsigned int serial_in(int offset) +{ + return inb(PORT(offset)); +} + +static inline void serial_out(int offset, int value) +{ + outb(value, PORT(offset)); +} + +int prom_putchar(char c) +{ + while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0) + ; + + serial_out(UART_TX, c); + + return 1; +} diff --git a/arch/mips/mti-malta/malta-display.c b/arch/mips/mti-malta/malta-display.c new file mode 100644 index 000000000000..7c8828fcb0ad --- /dev/null +++ b/arch/mips/mti-malta/malta-display.c @@ -0,0 +1,64 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Display routines for display messages in MIPS boards ascii display. + */ + +#include +#include +#include +#include +#include + +extern const char display_string[]; +static unsigned int display_count; +static unsigned int max_display_count; + +void mips_display_message(const char *str) +{ + static unsigned int __iomem *display = NULL; + int i; + + if (unlikely(display == NULL)) + display = ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int)); + + for (i = 0; i <= 14; i=i+2) { + if (*str) + __raw_writel(*str++, display + i); + else + __raw_writel(' ', display + i); + } +} + +static void scroll_display_message(unsigned long data); +static DEFINE_TIMER(mips_scroll_timer, scroll_display_message, HZ, 0); + +static void scroll_display_message(unsigned long data) +{ + mips_display_message(&display_string[display_count++]); + if (display_count == max_display_count) + display_count = 0; + + mod_timer(&mips_scroll_timer, jiffies + HZ); +} + +void mips_scroll_message(void) +{ + del_timer_sync(&mips_scroll_timer); + max_display_count = strlen(display_string) + 1 - 8; + mod_timer(&mips_scroll_timer, jiffies + 1); +} diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c new file mode 100644 index 000000000000..c0653021a171 --- /dev/null +++ b/arch/mips/mti-malta/malta-init.c @@ -0,0 +1,424 @@ +/* + * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * PROM library initialisation code. + */ +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#ifdef CONFIG_KGDB +extern int rs_kgdb_hook(int, int); +extern int rs_putDebugChar(char); +extern char rs_getDebugChar(void); +extern int saa9730_kgdb_hook(int); +extern int saa9730_putDebugChar(char); +extern char saa9730_getDebugChar(void); +#endif + +int prom_argc; +int *_prom_argv, *_prom_envp; + +/* + * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. + * This macro take care of sign extension, if running in 64-bit mode. + */ +#define prom_envp(index) ((char *)(long)_prom_envp[(index)]) + +int init_debug = 0; + +int mips_revision_corid; +int mips_revision_sconid; + +/* Bonito64 system controller register base. */ +unsigned long _pcictrl_bonito; +unsigned long _pcictrl_bonito_pcicfg; + +/* GT64120 system controller register base */ +unsigned long _pcictrl_gt64120; + +/* MIPS System controller register base */ +unsigned long _pcictrl_msc; + +char *prom_getenv(char *envname) +{ + /* + * Return a pointer to the given environment variable. + * In 64-bit mode: we're using 64-bit pointers, but all pointers + * in the PROM structures are only 32-bit, so we need some + * workarounds, if we are running in 64-bit mode. + */ + int i, index=0; + + i = strlen(envname); + + while (prom_envp(index)) { + if(strncmp(envname, prom_envp(index), i) == 0) { + return(prom_envp(index+1)); + } + index += 2; + } + + return NULL; +} + +static inline unsigned char str2hexnum(unsigned char c) +{ + if (c >= '0' && c <= '9') + return c - '0'; + if (c >= 'a' && c <= 'f') + return c - 'a' + 10; + return 0; /* foo */ +} + +static inline void str2eaddr(unsigned char *ea, unsigned char *str) +{ + int i; + + for (i = 0; i < 6; i++) { + unsigned char num; + + if((*str == '.') || (*str == ':')) + str++; + num = str2hexnum(*str++) << 4; + num |= (str2hexnum(*str++)); + ea[i] = num; + } +} + +int get_ethernet_addr(char *ethernet_addr) +{ + char *ethaddr_str; + + ethaddr_str = prom_getenv("ethaddr"); + if (!ethaddr_str) { + printk("ethaddr not set in boot prom\n"); + return -1; + } + str2eaddr(ethernet_addr, ethaddr_str); + + if (init_debug > 1) { + int i; + printk("get_ethernet_addr: "); + for (i=0; i<5; i++) + printk("%02x:", (unsigned char)*(ethernet_addr+i)); + printk("%02x\n", *(ethernet_addr+i)); + } + + return 0; +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static void __init console_config(void) +{ + char console_string[40]; + int baud = 0; + char parity = '\0', bits = '\0', flow = '\0'; + char *s; + + if ((strstr(prom_getcmdline(), "console=")) == NULL) { + s = prom_getenv("modetty0"); + if (s) { + while (*s >= '0' && *s <= '9') + baud = baud*10 + *s++ - '0'; + if (*s == ',') s++; + if (*s) parity = *s++; + if (*s == ',') s++; + if (*s) bits = *s++; + if (*s == ',') s++; + if (*s == 'h') flow = 'r'; + } + if (baud == 0) + baud = 38400; + if (parity != 'n' && parity != 'o' && parity != 'e') + parity = 'n'; + if (bits != '7' && bits != '8') + bits = '8'; + if (flow == '\0') + flow = 'r'; + sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, parity, bits, flow); + strcat(prom_getcmdline(), console_string); + pr_info("Config serial console:%s\n", console_string); + } +} +#endif + +#ifdef CONFIG_KGDB +void __init kgdb_config(void) +{ + extern int (*generic_putDebugChar)(char); + extern char (*generic_getDebugChar)(void); + char *argptr; + int line, speed; + + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { + argptr += strlen("kgdb=ttyS"); + if (*argptr != '0' && *argptr != '1') + printk("KGDB: Unknown serial line /dev/ttyS%c, " + "falling back to /dev/ttyS1\n", *argptr); + line = *argptr == '0' ? 0 : 1; + printk("KGDB: Using serial line /dev/ttyS%d for session\n", line); + + speed = 0; + if (*++argptr == ',') + { + int c; + while ((c = *++argptr) && ('0' <= c && c <= '9')) + speed = speed * 10 + c - '0'; + } + { + speed = rs_kgdb_hook(line, speed); + generic_putDebugChar = rs_putDebugChar; + generic_getDebugChar = rs_getDebugChar; + } + + pr_info("KGDB: Using serial line /dev/ttyS%d at %d for " + "session, please connect your debugger\n", + line ? 1 : 0, speed); + + { + char *s; + for (s = "Please connect GDB to this port\r\n"; *s; ) + generic_putDebugChar(*s++); + } + + /* Breakpoint is invoked after interrupts are initialised */ + } +} +#endif + +static void __init mips_nmi_setup(void) +{ + void *base; + extern char except_vec_nmi; + + base = cpu_has_veic ? + (void *)(CAC_BASE + 0xa80) : + (void *)(CAC_BASE + 0x380); + memcpy(base, &except_vec_nmi, 0x80); + flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); +} + +static void __init mips_ejtag_setup(void) +{ + void *base; + extern char except_vec_ejtag_debug; + + base = cpu_has_veic ? + (void *)(CAC_BASE + 0xa00) : + (void *)(CAC_BASE + 0x300); + memcpy(base, &except_vec_ejtag_debug, 0x80); + flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); +} + +extern struct plat_smp_ops msmtc_smp_ops; + +void __init prom_init(void) +{ + prom_argc = fw_arg0; + _prom_argv = (int *) fw_arg1; + _prom_envp = (int *) fw_arg2; + + mips_display_message("LINUX"); + + /* + * early setup of _pcictrl_bonito so that we can determine + * the system controller on a CORE_EMUL board + */ + _pcictrl_bonito = (unsigned long)ioremap(BONITO_REG_BASE, BONITO_REG_SIZE); + + mips_revision_corid = MIPS_REVISION_CORID; + + if (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL) { + if (BONITO_PCIDID == 0x0001df53 || + BONITO_PCIDID == 0x0003df53) + mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_BON; + else + mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_MSC; + } + + mips_revision_sconid = MIPS_REVISION_SCONID; + if (mips_revision_sconid == MIPS_REVISION_SCON_OTHER) { + switch (mips_revision_corid) { + case MIPS_REVISION_CORID_QED_RM5261: + case MIPS_REVISION_CORID_CORE_LV: + case MIPS_REVISION_CORID_CORE_FPGA: + case MIPS_REVISION_CORID_CORE_FPGAR2: + mips_revision_sconid = MIPS_REVISION_SCON_GT64120; + break; + case MIPS_REVISION_CORID_CORE_EMUL_BON: + case MIPS_REVISION_CORID_BONITO64: + case MIPS_REVISION_CORID_CORE_20K: + mips_revision_sconid = MIPS_REVISION_SCON_BONITO; + break; + case MIPS_REVISION_CORID_CORE_MSC: + case MIPS_REVISION_CORID_CORE_FPGA2: + case MIPS_REVISION_CORID_CORE_24K: + /* + * SOCit/ROCit support is essentially identical + * but make an attempt to distinguish them + */ + mips_revision_sconid = MIPS_REVISION_SCON_SOCIT; + break; + case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_FPGA4: + case MIPS_REVISION_CORID_CORE_FPGA5: + case MIPS_REVISION_CORID_CORE_EMUL_MSC: + default: + /* See above */ + mips_revision_sconid = MIPS_REVISION_SCON_ROCIT; + break; + } + } + + switch (mips_revision_sconid) { + u32 start, map, mask, data; + + case MIPS_REVISION_SCON_GT64120: + /* + * Setup the North bridge to do Master byte-lane swapping + * when running in bigendian. + */ + _pcictrl_gt64120 = (unsigned long)ioremap(MIPS_GT_BASE, 0x2000); + +#ifdef CONFIG_CPU_LITTLE_ENDIAN + GT_WRITE(GT_PCI0_CMD_OFS, GT_PCI0_CMD_MBYTESWAP_BIT | + GT_PCI0_CMD_SBYTESWAP_BIT); +#else + GT_WRITE(GT_PCI0_CMD_OFS, 0); +#endif + /* Fix up PCI I/O mapping if necessary (for Atlas). */ + start = GT_READ(GT_PCI0IOLD_OFS); + map = GT_READ(GT_PCI0IOREMAP_OFS); + if ((start & map) != 0) { + map &= ~start; + GT_WRITE(GT_PCI0IOREMAP_OFS, map); + } + + set_io_port_base(MALTA_GT_PORT_BASE); + break; + + case MIPS_REVISION_SCON_BONITO: + _pcictrl_bonito_pcicfg = (unsigned long)ioremap(BONITO_PCICFG_BASE, BONITO_PCICFG_SIZE); + + /* + * Disable Bonito IOBC. + */ + BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & + ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | + BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); + + /* + * Setup the North bridge to do Master byte-lane swapping + * when running in bigendian. + */ +#ifdef CONFIG_CPU_LITTLE_ENDIAN + BONITO_BONGENCFG = BONITO_BONGENCFG & + ~(BONITO_BONGENCFG_MSTRBYTESWAP | + BONITO_BONGENCFG_BYTESWAP); +#else + BONITO_BONGENCFG = BONITO_BONGENCFG | + BONITO_BONGENCFG_MSTRBYTESWAP | + BONITO_BONGENCFG_BYTESWAP; +#endif + + set_io_port_base(MALTA_BONITO_PORT_BASE); + break; + + case MIPS_REVISION_SCON_SOCIT: + case MIPS_REVISION_SCON_ROCIT: + _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000); + mips_pci_controller: + mb(); + MSC_READ(MSC01_PCI_CFG, data); + MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT); + wmb(); + + /* Fix up lane swapping. */ +#ifdef CONFIG_CPU_LITTLE_ENDIAN + MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP); +#else + MSC_WRITE(MSC01_PCI_SWAP, + MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_IO_SHF | + MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF | + MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF); +#endif + /* Fix up target memory mapping. */ + MSC_READ(MSC01_PCI_BAR0, mask); + MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK); + + /* Don't handle target retries indefinitely. */ + if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) == + MSC01_PCI_CFG_MAXRTRY_MSK) + data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK << + MSC01_PCI_CFG_MAXRTRY_SHF)) | + ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) << + MSC01_PCI_CFG_MAXRTRY_SHF); + + wmb(); + MSC_WRITE(MSC01_PCI_CFG, data); + mb(); + + set_io_port_base(MALTA_MSC_PORT_BASE); + break; + + case MIPS_REVISION_SCON_SOCITSC: + case MIPS_REVISION_SCON_SOCITSCP: + _pcictrl_msc = (unsigned long)ioremap(MIPS_SOCITSC_PCI_REG_BASE, 0x2000); + goto mips_pci_controller; + + default: + /* Unknown system controller */ + mips_display_message("SC Error"); + while (1); /* We die here... */ + } + board_nmi_handler_setup = mips_nmi_setup; + board_ejtag_handler_setup = mips_ejtag_setup; + + pr_info("\nLINUX started...\n"); + prom_init_cmdline(); + prom_meminit(); +#ifdef CONFIG_SERIAL_8250_CONSOLE + console_config(); +#endif +#ifdef CONFIG_MIPS_CMP + register_smp_ops(&cmp_smp_ops); +#endif +#ifdef CONFIG_MIPS_MT_SMP + register_smp_ops(&vsmp_smp_ops); +#endif +#ifdef CONFIG_MIPS_MT_SMTC + register_smp_ops(&msmtc_smp_ops); +#endif +} diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c new file mode 100644 index 000000000000..ea176113fea9 --- /dev/null +++ b/arch/mips/mti-malta/malta-int.c @@ -0,0 +1,712 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. + * Copyright (C) 2001 Ralf Baechle + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Routines for generic manipulation of the interrupts found on the MIPS + * Malta board. + * The interrupt controller is located in the South Bridge a PIIX4 device + * with two internal 82C95 interrupt controllers. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +int gcmp_present = -1; +int gic_present; +static unsigned long _msc01_biu_base; +static unsigned long _gcmp_base; +static unsigned int ipi_map[NR_CPUS]; + +static DEFINE_SPINLOCK(mips_irq_lock); + +static inline int mips_pcibios_iack(void) +{ + int irq; + u32 dummy; + + /* + * Determine highest priority pending interrupt by performing + * a PCI Interrupt Acknowledge cycle. + */ + switch (mips_revision_sconid) { + case MIPS_REVISION_SCON_SOCIT: + case MIPS_REVISION_SCON_ROCIT: + case MIPS_REVISION_SCON_SOCITSC: + case MIPS_REVISION_SCON_SOCITSCP: + MSC_READ(MSC01_PCI_IACK, irq); + irq &= 0xff; + break; + case MIPS_REVISION_SCON_GT64120: + irq = GT_READ(GT_PCI0_IACK_OFS); + irq &= 0xff; + break; + case MIPS_REVISION_SCON_BONITO: + /* The following will generate a PCI IACK cycle on the + * Bonito controller. It's a little bit kludgy, but it + * was the easiest way to implement it in hardware at + * the given time. + */ + BONITO_PCIMAP_CFG = 0x20000; + + /* Flush Bonito register block */ + dummy = BONITO_PCIMAP_CFG; + iob(); /* sync */ + + irq = readl((u32 *)_pcictrl_bonito_pcicfg); + iob(); /* sync */ + irq &= 0xff; + BONITO_PCIMAP_CFG = 0; + break; + default: + printk(KERN_WARNING "Unknown system controller.\n"); + return -1; + } + return irq; +} + +static inline int get_int(void) +{ + unsigned long flags; + int irq; + spin_lock_irqsave(&mips_irq_lock, flags); + + irq = mips_pcibios_iack(); + + /* + * The only way we can decide if an interrupt is spurious + * is by checking the 8259 registers. This needs a spinlock + * on an SMP system, so leave it up to the generic code... + */ + + spin_unlock_irqrestore(&mips_irq_lock, flags); + + return irq; +} + +static void malta_hw0_irqdispatch(void) +{ + int irq; + + irq = get_int(); + if (irq < 0) { + /* interrupt has already been cleared */ + return; + } + + do_IRQ(MALTA_INT_BASE + irq); +} + +static void malta_ipi_irqdispatch(void) +{ + int irq; + + irq = gic_get_int(); + if (irq < 0) + return; /* interrupt has already been cleared */ + + do_IRQ(MIPS_GIC_IRQ_BASE + irq); +} + +static void corehi_irqdispatch(void) +{ + unsigned int intedge, intsteer, pcicmd, pcibadaddr; + unsigned int pcimstat, intisr, inten, intpol; + unsigned int intrcause, datalo, datahi; + struct pt_regs *regs = get_irq_regs(); + + printk(KERN_EMERG "CoreHI interrupt, shouldn't happen, we die here!\n"); + printk(KERN_EMERG "epc : %08lx\nStatus: %08lx\n" + "Cause : %08lx\nbadVaddr : %08lx\n", + regs->cp0_epc, regs->cp0_status, + regs->cp0_cause, regs->cp0_badvaddr); + + /* Read all the registers and then print them as there is a + problem with interspersed printk's upsetting the Bonito controller. + Do it for the others too. + */ + + switch (mips_revision_sconid) { + case MIPS_REVISION_SCON_SOCIT: + case MIPS_REVISION_SCON_ROCIT: + case MIPS_REVISION_SCON_SOCITSC: + case MIPS_REVISION_SCON_SOCITSCP: + ll_msc_irq(); + break; + case MIPS_REVISION_SCON_GT64120: + intrcause = GT_READ(GT_INTRCAUSE_OFS); + datalo = GT_READ(GT_CPUERR_ADDRLO_OFS); + datahi = GT_READ(GT_CPUERR_ADDRHI_OFS); + printk(KERN_EMERG "GT_INTRCAUSE = %08x\n", intrcause); + printk(KERN_EMERG "GT_CPUERR_ADDR = %02x%08x\n", + datahi, datalo); + break; + case MIPS_REVISION_SCON_BONITO: + pcibadaddr = BONITO_PCIBADADDR; + pcimstat = BONITO_PCIMSTAT; + intisr = BONITO_INTISR; + inten = BONITO_INTEN; + intpol = BONITO_INTPOL; + intedge = BONITO_INTEDGE; + intsteer = BONITO_INTSTEER; + pcicmd = BONITO_PCICMD; + printk(KERN_EMERG "BONITO_INTISR = %08x\n", intisr); + printk(KERN_EMERG "BONITO_INTEN = %08x\n", inten); + printk(KERN_EMERG "BONITO_INTPOL = %08x\n", intpol); + printk(KERN_EMERG "BONITO_INTEDGE = %08x\n", intedge); + printk(KERN_EMERG "BONITO_INTSTEER = %08x\n", intsteer); + printk(KERN_EMERG "BONITO_PCICMD = %08x\n", pcicmd); + printk(KERN_EMERG "BONITO_PCIBADADDR = %08x\n", pcibadaddr); + printk(KERN_EMERG "BONITO_PCIMSTAT = %08x\n", pcimstat); + break; + } + + die("CoreHi interrupt", regs); +} + +static inline int clz(unsigned long x) +{ + __asm__( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + return -clz(pending) + 31 - CAUSEB_IP; +#else + unsigned int a0 = 7; + unsigned int t0; + + t0 = pending & 0xf000; + t0 = t0 < 1; + t0 = t0 << 2; + a0 = a0 - t0; + pending = pending << t0; + + t0 = pending & 0xc000; + t0 = t0 < 1; + t0 = t0 << 1; + a0 = a0 - t0; + pending = pending << t0; + + t0 = pending & 0x8000; + t0 = t0 < 1; + /* t0 = t0 << 2; */ + a0 = a0 - t0; + /* pending = pending << t0; */ + + return a0; +#endif +} + +/* + * IRQs on the Malta board look basically (barring software IRQs which we + * don't use at all and all external interrupt sources are combined together + * on hardware interrupt 0 (MIPS IRQ 2)) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware (ignored) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + + if (irq == MIPSCPU_INT_I8259A) + malta_hw0_irqdispatch(); + else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()])) + malta_ipi_irqdispatch(); + else if (irq >= 0) + do_IRQ(MIPS_CPU_IRQ_BASE + irq); + else + spurious_interrupt(); +} + +#ifdef CONFIG_MIPS_MT_SMP + + +#define GIC_MIPS_CPU_IPI_RESCHED_IRQ 3 +#define GIC_MIPS_CPU_IPI_CALL_IRQ 4 + +#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */ +#define C_RESCHED C_SW0 +#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for resched */ +#define C_CALL C_SW1 +static int cpu_ipi_resched_irq, cpu_ipi_call_irq; + +static void ipi_resched_dispatch(void) +{ + do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ); +} + +static void ipi_call_dispatch(void) +{ + do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ); +} + +static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) +{ + return IRQ_HANDLED; +} + +static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) +{ + smp_call_function_interrupt(); + + return IRQ_HANDLED; +} + +static struct irqaction irq_resched = { + .handler = ipi_resched_interrupt, + .flags = IRQF_DISABLED|IRQF_PERCPU, + .name = "IPI_resched" +}; + +static struct irqaction irq_call = { + .handler = ipi_call_interrupt, + .flags = IRQF_DISABLED|IRQF_PERCPU, + .name = "IPI_call" +}; +#endif /* CONFIG_MIPS_MT_SMP */ + +static struct irqaction i8259irq = { + .handler = no_action, + .name = "XT-PIC cascade" +}; + +static struct irqaction corehi_irqaction = { + .handler = no_action, + .name = "CoreHi" +}; + +static msc_irqmap_t __initdata msc_irqmap[] = { + {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0}, + {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0}, +}; +static int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap); + +static msc_irqmap_t __initdata msc_eicirqmap[] = { + {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_I8259A, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_SMI, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_COREHI, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_CORELO, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0}, + {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} +}; + +static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); + +#if defined(CONFIG_MIPS_MT_SMP) +/* + * This GIC specific tabular array defines the association between External + * Interrupts and CPUs/Core Interrupts. The nature of the External + * Interrupts is also defined here - polarity/trigger. + */ +static struct gic_intr_map gic_intr_map[] = { + { GIC_EXT_INTR(0), X, X, X, X, 0 }, + { GIC_EXT_INTR(1), X, X, X, X, 0 }, + { GIC_EXT_INTR(2), X, X, X, X, 0 }, + { GIC_EXT_INTR(3), 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(4), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(5), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(6), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(7), 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(8), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(9), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(10), X, X, X, X, 0 }, + { GIC_EXT_INTR(11), X, X, X, X, 0 }, + { GIC_EXT_INTR(12), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(15), X, X, X, X, 0 }, + { GIC_EXT_INTR(16), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(17), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(18), 1, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(19), 1, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(20), 2, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(21), 2, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(22), 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(23), 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, +}; +#endif + +/* + * GCMP needs to be detected before any SMP initialisation + */ +static int __init gcmp_probe(unsigned long addr, unsigned long size) +{ + if (gcmp_present >= 0) + return gcmp_present; + + _gcmp_base = (unsigned long) ioremap_nocache(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); + _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ); + gcmp_present = (GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) == GCMP_BASE_ADDR; + + if (gcmp_present) + printk(KERN_DEBUG "GCMP present\n"); + return gcmp_present; +} + +#if defined(CONFIG_MIPS_MT_SMP) +static void __init fill_ipi_map(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) { + if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X)) + ipi_map[gic_intr_map[i].cpunum] |= + (1 << (gic_intr_map[i].pin + 2)); + } +} +#endif + +void __init arch_init_irq(void) +{ + int gic_present, gcmp_present; + + init_i8259_irqs(); + + if (!cpu_has_veic) + mips_cpu_irq_init(); + + gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); + if (gcmp_present) { + GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK; + gic_present = 1; + } else { + _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ); + gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) & + MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF; + } + if (gic_present) + printk(KERN_DEBUG "GIC present\n"); + + switch (mips_revision_sconid) { + case MIPS_REVISION_SCON_SOCIT: + case MIPS_REVISION_SCON_ROCIT: + if (cpu_has_veic) + init_msc_irqs(MIPS_MSC01_IC_REG_BASE, + MSC01E_INT_BASE, msc_eicirqmap, + msc_nr_eicirqs); + else + init_msc_irqs(MIPS_MSC01_IC_REG_BASE, + MSC01C_INT_BASE, msc_irqmap, + msc_nr_irqs); + break; + + case MIPS_REVISION_SCON_SOCITSC: + case MIPS_REVISION_SCON_SOCITSCP: + if (cpu_has_veic) + init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, + MSC01E_INT_BASE, msc_eicirqmap, + msc_nr_eicirqs); + else + init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, + MSC01C_INT_BASE, msc_irqmap, + msc_nr_irqs); + } + + if (cpu_has_veic) { + set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch); + set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch); + setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq); + setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction); + } else if (cpu_has_vint) { + set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch); + set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch); +#ifdef CONFIG_MIPS_MT_SMTC + setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq, + (0x100 << MIPSCPU_INT_I8259A)); + setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, + &corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI)); + /* + * Temporary hack to ensure that the subsidiary device + * interrupts coing in via the i8259A, but associated + * with low IRQ numbers, will restore the Status.IM + * value associated with the i8259A. + */ + { + int i; + + for (i = 0; i < 16; i++) + irq_hwmask[i] = (0x100 << MIPSCPU_INT_I8259A); + } +#else /* Not SMTC */ + setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); + setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, + &corehi_irqaction); +#endif /* CONFIG_MIPS_MT_SMTC */ + } else { + setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); + setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, + &corehi_irqaction); + } + +#if defined(CONFIG_MIPS_MT_SMP) + if (gic_present) { + /* FIXME */ + int i; + struct { + unsigned int resched; + unsigned int call; + } ipiirq[] = { + { + .resched = GIC_IPI_EXT_INTR_RESCHED_VPE0, + .call = GIC_IPI_EXT_INTR_CALLFNC_VPE0}, + { + .resched = GIC_IPI_EXT_INTR_RESCHED_VPE1, + .call = GIC_IPI_EXT_INTR_CALLFNC_VPE1 + }, { + .resched = GIC_IPI_EXT_INTR_RESCHED_VPE2, + .call = GIC_IPI_EXT_INTR_CALLFNC_VPE2 + }, { + .resched = GIC_IPI_EXT_INTR_RESCHED_VPE3, + .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3 + } + }; + fill_ipi_map(); + gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); + if (!gcmp_present) { + /* Enable the GIC */ + i = REG(_msc01_biu_base, MSC01_SC_CFG); + REG(_msc01_biu_base, MSC01_SC_CFG) = + (i | (0x1 << MSC01_SC_CFG_GICENA_SHF)); + pr_debug("GIC Enabled\n"); + } + + /* set up ipi interrupts */ + if (cpu_has_vint) { + set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch); + set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch); + } + /* Argh.. this really needs sorting out.. */ + printk("CPU%d: status register was %08x\n", smp_processor_id(), read_c0_status()); + write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4); + printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status()); + write_c0_status(0x1100dc00); + printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); + for (i = 0; i < ARRAY_SIZE(ipiirq); i++) { + setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched); + setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call); + + set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq); + set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq); + } + } else { + /* set up ipi interrupts */ + if (cpu_has_veic) { + set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch); + set_vi_handler (MSC01E_INT_SW1, ipi_call_dispatch); + cpu_ipi_resched_irq = MSC01E_INT_SW0; + cpu_ipi_call_irq = MSC01E_INT_SW1; + } else { + if (cpu_has_vint) { + set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); + set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); + } + cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ; + cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ; + } + + setup_irq(cpu_ipi_resched_irq, &irq_resched); + setup_irq(cpu_ipi_call_irq, &irq_call); + + set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq); + set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq); + } +#endif +} + +void malta_be_init(void) +{ + if (gcmp_present) { + /* Could change CM error mask register */ + } +} + + +static char *tr[8] = { + "mem", "gcr", "gic", "mmio", + "0x04", "0x05", "0x06", "0x07" +}; + +static char *mcmd[32] = { + [0x00] = "0x00", + [0x01] = "Legacy Write", + [0x02] = "Legacy Read", + [0x03] = "0x03", + [0x04] = "0x04", + [0x05] = "0x05", + [0x06] = "0x06", + [0x07] = "0x07", + [0x08] = "Coherent Read Own", + [0x09] = "Coherent Read Share", + [0x0a] = "Coherent Read Discard", + [0x0b] = "Coherent Ready Share Always", + [0x0c] = "Coherent Upgrade", + [0x0d] = "Coherent Writeback", + [0x0e] = "0x0e", + [0x0f] = "0x0f", + [0x10] = "Coherent Copyback", + [0x11] = "Coherent Copyback Invalidate", + [0x12] = "Coherent Invalidate", + [0x13] = "Coherent Write Invalidate", + [0x14] = "Coherent Completion Sync", + [0x15] = "0x15", + [0x16] = "0x16", + [0x17] = "0x17", + [0x18] = "0x18", + [0x19] = "0x19", + [0x1a] = "0x1a", + [0x1b] = "0x1b", + [0x1c] = "0x1c", + [0x1d] = "0x1d", + [0x1e] = "0x1e", + [0x1f] = "0x1f" +}; + +static char *core[8] = { + "Invalid/OK", "Invalid/Data", + "Shared/OK", "Shared/Data", + "Modified/OK", "Modified/Data", + "Exclusive/OK", "Exclusive/Data" +}; + +static char *causes[32] = { + "None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR", + "COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07", + "0x08", "0x09", "0x0a", "0x0b", + "0x0c", "0x0d", "0x0e", "0x0f", + "0x10", "0x11", "0x12", "0x13", + "0x14", "0x15", "0x16", "INTVN_WR_ERR", + "INTVN_RD_ERR", "0x19", "0x1a", "0x1b", + "0x1c", "0x1d", "0x1e", "0x1f" +}; + +int malta_be_handler(struct pt_regs *regs, int is_fixup) +{ + /* This duplicates the handling in do_be which seems wrong */ + int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL; + + if (gcmp_present) { + unsigned long cm_error = GCMPGCB(GCMEC); + unsigned long cm_addr = GCMPGCB(GCMEA); + unsigned long cm_other = GCMPGCB(GCMEO); + unsigned long cause, ocause; + char buf[256]; + + cause = (cm_error & GCMP_GCB_GMEC_ERROR_TYPE_MSK); + if (cause != 0) { + cause >>= GCMP_GCB_GMEC_ERROR_TYPE_SHF; + if (cause < 16) { + unsigned long cca_bits = (cm_error >> 15) & 7; + unsigned long tr_bits = (cm_error >> 12) & 7; + unsigned long mcmd_bits = (cm_error >> 7) & 0x1f; + unsigned long stag_bits = (cm_error >> 3) & 15; + unsigned long sport_bits = (cm_error >> 0) & 7; + + snprintf(buf, sizeof(buf), + "CCA=%lu TR=%s MCmd=%s STag=%lu " + "SPort=%lu\n", + cca_bits, tr[tr_bits], mcmd[mcmd_bits], + stag_bits, sport_bits); + } else { + /* glob state & sresp together */ + unsigned long c3_bits = (cm_error >> 18) & 7; + unsigned long c2_bits = (cm_error >> 15) & 7; + unsigned long c1_bits = (cm_error >> 12) & 7; + unsigned long c0_bits = (cm_error >> 9) & 7; + unsigned long sc_bit = (cm_error >> 8) & 1; + unsigned long mcmd_bits = (cm_error >> 3) & 0x1f; + unsigned long sport_bits = (cm_error >> 0) & 7; + snprintf(buf, sizeof(buf), + "C3=%s C2=%s C1=%s C0=%s SC=%s " + "MCmd=%s SPort=%lu\n", + core[c3_bits], core[c2_bits], + core[c1_bits], core[c0_bits], + sc_bit ? "True" : "False", + mcmd[mcmd_bits], sport_bits); + } + + ocause = (cm_other & GCMP_GCB_GMEO_ERROR_2ND_MSK) >> + GCMP_GCB_GMEO_ERROR_2ND_SHF; + + printk("CM_ERROR=%08lx %s <%s>\n", cm_error, + causes[cause], buf); + printk("CM_ADDR =%08lx\n", cm_addr); + printk("CM_OTHER=%08lx %s\n", cm_other, causes[ocause]); + + /* reprime cause register */ + GCMPGCB(GCMEC) = 0; + } + } + + return retval; +} diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c new file mode 100644 index 000000000000..6a1854de4579 --- /dev/null +++ b/arch/mips/mti-malta/malta-kgdb.c @@ -0,0 +1,133 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * This is the interface to the remote debugger stub. + */ +#include +#include +#include +#include + +#include +#include + +static struct serial_state rs_table[] = { + SERIAL_PORT_DFNS /* Defined in serial.h */ +}; + +static struct async_struct kdb_port_info = {0}; + +int (*generic_putDebugChar)(char); +char (*generic_getDebugChar)(void); + +static __inline__ unsigned int serial_in(struct async_struct *info, int offset) +{ + return inb(info->port + offset); +} + +static __inline__ void serial_out(struct async_struct *info, int offset, + int value) +{ + outb(value, info->port+offset); +} + +int rs_kgdb_hook(int tty_no, int speed) { + int t; + struct serial_state *ser = &rs_table[tty_no]; + + kdb_port_info.state = ser; + kdb_port_info.magic = SERIAL_MAGIC; + kdb_port_info.port = ser->port; + kdb_port_info.flags = ser->flags; + + /* + * Clear all interrupts + */ + serial_in(&kdb_port_info, UART_LSR); + serial_in(&kdb_port_info, UART_RX); + serial_in(&kdb_port_info, UART_IIR); + serial_in(&kdb_port_info, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */ + if (kdb_port_info.flags & ASYNC_FOURPORT) { + kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS; + t = UART_MCR_DTR | UART_MCR_OUT1; + } else { + kdb_port_info.MCR + = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; + t = UART_MCR_DTR | UART_MCR_RTS; + } + + kdb_port_info.MCR = t; /* no interrupts, please */ + serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR); + + /* + * and set the speed of the serial port + */ + if (speed == 0) + speed = 9600; + + t = kdb_port_info.state->baud_base / speed; + /* set DLAB */ + serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB); + serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */ + serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */ + /* reset DLAB */ + serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); + + return speed; +} + +int putDebugChar(char c) +{ + return generic_putDebugChar(c); +} + +char getDebugChar(void) +{ + return generic_getDebugChar(); +} + +int rs_putDebugChar(char c) +{ + + if (!kdb_port_info.state) { /* need to init device first */ + return 0; + } + + while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0) + ; + + serial_out(&kdb_port_info, UART_TX, c); + + return 1; +} + +char rs_getDebugChar(void) +{ + if (!kdb_port_info.state) { /* need to init device first */ + return 0; + } + + while (!(serial_in(&kdb_port_info, UART_LSR) & 1)) + ; + + return serial_in(&kdb_port_info, UART_RX); +} diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c new file mode 100644 index 000000000000..61888ff72c87 --- /dev/null +++ b/arch/mips/mti-malta/malta-memory.c @@ -0,0 +1,177 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * PROM library functions for acquiring/using memory descriptors given to + * us from the YAMON. + */ +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +/*#define DEBUG*/ + +enum yamon_memtypes { + yamon_dontuse, + yamon_prom, + yamon_free, +}; +static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; + +#ifdef DEBUG +static char *mtypes[3] = { + "Dont use memory", + "YAMON PROM memory", + "Free memmory", +}; +#endif + +/* determined physical memory size, not overridden by command line args */ +unsigned long physical_memsize = 0L; + +static struct prom_pmemblock * __init prom_getmdesc(void) +{ + char *memsize_str; + unsigned int memsize; + char cmdline[CL_SIZE], *ptr; + + /* otherwise look in the environment */ + memsize_str = prom_getenv("memsize"); + if (!memsize_str) { + printk(KERN_WARNING + "memsize not set in boot prom, set to default (32Mb)\n"); + physical_memsize = 0x02000000; + } else { +#ifdef DEBUG + pr_debug("prom_memsize = %s\n", memsize_str); +#endif + physical_memsize = simple_strtol(memsize_str, NULL, 0); + } + +#ifdef CONFIG_CPU_BIG_ENDIAN + /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last + word of physical memory */ + physical_memsize -= PAGE_SIZE; +#endif + + /* Check the command line for a memsize directive that overrides + the physical/default amount */ + strcpy(cmdline, arcs_cmdline); + ptr = strstr(cmdline, "memsize="); + if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) + ptr = strstr(ptr, " memsize="); + + if (ptr) + memsize = memparse(ptr + 8, &ptr); + else + memsize = physical_memsize; + + memset(mdesc, 0, sizeof(mdesc)); + + mdesc[0].type = yamon_dontuse; + mdesc[0].base = 0x00000000; + mdesc[0].size = 0x00001000; + + mdesc[1].type = yamon_prom; + mdesc[1].base = 0x00001000; + mdesc[1].size = 0x000ef000; + + /* + * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the + * south bridge and PCI access always forwarded to the ISA Bus and + * BIOSCS# is always generated. + * This mean that this area can't be used as DMA memory for PCI + * devices. + */ + mdesc[2].type = yamon_dontuse; + mdesc[2].base = 0x000f0000; + mdesc[2].size = 0x00010000; + + mdesc[3].type = yamon_dontuse; + mdesc[3].base = 0x00100000; + mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - mdesc[3].base; + + mdesc[4].type = yamon_free; + mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end)); + mdesc[4].size = memsize - mdesc[4].base; + + return &mdesc[0]; +} + +static int __init prom_memtype_classify(unsigned int type) +{ + switch (type) { + case yamon_free: + return BOOT_MEM_RAM; + case yamon_prom: + return BOOT_MEM_ROM_DATA; + default: + return BOOT_MEM_RESERVED; + } +} + +void __init prom_meminit(void) +{ + struct prom_pmemblock *p; + +#ifdef DEBUG + pr_debug("YAMON MEMORY DESCRIPTOR dump:\n"); + p = prom_getmdesc(); + while (p->size) { + int i = 0; + pr_debug("[%d,%p]: base<%08lx> size<%08lx> type<%s>\n", + i, p, p->base, p->size, mtypes[p->type]); + p++; + i++; + } +#endif + p = prom_getmdesc(); + + while (p->size) { + long type; + unsigned long base, size; + + type = prom_memtype_classify(p->type); + base = p->base; + size = p->size; + + add_memory_region(base, size, type); + p++; + } +} + +void __init prom_free_prom_memory(void) +{ + unsigned long addr; + int i; + + for (i = 0; i < boot_mem_map.nr_map; i++) { + if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) + continue; + + addr = boot_mem_map.map[i].addr; + free_init_pages("prom memory", + addr, addr + boot_mem_map.map[i].size); + } +} diff --git a/arch/mips/mti-malta/malta-mtd.c b/arch/mips/mti-malta/malta-mtd.c new file mode 100644 index 000000000000..8ad9bdf25dce --- /dev/null +++ b/arch/mips/mti-malta/malta-mtd.c @@ -0,0 +1,63 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 MIPS Technologies, Inc. + * written by Ralf Baechle + */ + +#include +#include +#include +#include +#include + +static struct mtd_partition malta_mtd_partitions[] = { + { + .name = "YAMON", + .offset = 0x0, + .size = 0x100000, + .mask_flags = MTD_WRITEABLE + }, { + .name = "User FS", + .offset = 0x100000, + .size = 0x2e0000 + }, { + .name = "Board Config", + .offset = 0x3e0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE + } +}; + +static struct physmap_flash_data malta_flash_data = { + .width = 4, + .nr_parts = ARRAY_SIZE(malta_mtd_partitions), + .parts = malta_mtd_partitions +}; + +static struct resource malta_flash_resource = { + .start = 0x1e000000, + .end = 0x1e3fffff, + .flags = IORESOURCE_MEM +}; + +static struct platform_device malta_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &malta_flash_data, + }, + .num_resources = 1, + .resource = &malta_flash_resource, +}; + +static int __init malta_mtd_init(void) +{ + platform_device_register(&malta_flash); + + return 0; +} + +module_init(malta_mtd_init) diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c new file mode 100644 index 000000000000..b9743190609a --- /dev/null +++ b/arch/mips/mti-malta/malta-pci.c @@ -0,0 +1,243 @@ +/* + * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki + * + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * MIPS boards specific PCI support. + */ +#include +#include +#include +#include + +#include + +#include +#include +#include + +static struct resource bonito64_mem_resource = { + .name = "Bonito PCI MEM", + .flags = IORESOURCE_MEM, +}; + +static struct resource bonito64_io_resource = { + .name = "Bonito PCI I/O", + .start = 0x00000000UL, + .end = 0x000fffffUL, + .flags = IORESOURCE_IO, +}; + +static struct resource gt64120_mem_resource = { + .name = "GT-64120 PCI MEM", + .flags = IORESOURCE_MEM, +}; + +static struct resource gt64120_io_resource = { + .name = "GT-64120 PCI I/O", + .flags = IORESOURCE_IO, +}; + +static struct resource msc_mem_resource = { + .name = "MSC PCI MEM", + .flags = IORESOURCE_MEM, +}; + +static struct resource msc_io_resource = { + .name = "MSC PCI I/O", + .flags = IORESOURCE_IO, +}; + +extern struct pci_ops bonito64_pci_ops; +extern struct pci_ops gt64xxx_pci0_ops; +extern struct pci_ops msc_pci_ops; + +static struct pci_controller bonito64_controller = { + .pci_ops = &bonito64_pci_ops, + .io_resource = &bonito64_io_resource, + .mem_resource = &bonito64_mem_resource, + .io_offset = 0x00000000UL, +}; + +static struct pci_controller gt64120_controller = { + .pci_ops = >64xxx_pci0_ops, + .io_resource = >64120_io_resource, + .mem_resource = >64120_mem_resource, +}; + +static struct pci_controller msc_controller = { + .pci_ops = &msc_pci_ops, + .io_resource = &msc_io_resource, + .mem_resource = &msc_mem_resource, +}; + +void __init mips_pcibios_init(void) +{ + struct pci_controller *controller; + resource_size_t start, end, map, start1, end1, map1, map2, map3, mask; + + switch (mips_revision_sconid) { + case MIPS_REVISION_SCON_GT64120: + /* + * Due to a bug in the Galileo system controller, we need + * to setup the PCI BAR for the Galileo internal registers. + * This should be done in the bios/bootprom and will be + * fixed in a later revision of YAMON (the MIPS boards + * boot prom). + */ + GT_WRITE(GT_PCI0_CFGADDR_OFS, + (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | /* Local bus */ + (0 << GT_PCI0_CFGADDR_DEVNUM_SHF) | /* GT64120 dev */ + (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | /* Function 0*/ + ((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) | /* BAR 4*/ + GT_PCI0_CFGADDR_CONFIGEN_BIT); + + /* Perform the write */ + GT_WRITE(GT_PCI0_CFGDATA_OFS, CPHYSADDR(MIPS_GT_BASE)); + + /* Set up resource ranges from the controller's registers. */ + start = GT_READ(GT_PCI0M0LD_OFS); + end = GT_READ(GT_PCI0M0HD_OFS); + map = GT_READ(GT_PCI0M0REMAP_OFS); + end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK); + start1 = GT_READ(GT_PCI0M1LD_OFS); + end1 = GT_READ(GT_PCI0M1HD_OFS); + map1 = GT_READ(GT_PCI0M1REMAP_OFS); + end1 = (end1 & GT_PCI_HD_MSK) | (start1 & ~GT_PCI_HD_MSK); + /* Cannot support multiple windows, use the wider. */ + if (end1 - start1 > end - start) { + start = start1; + end = end1; + map = map1; + } + mask = ~(start ^ end); + /* We don't support remapping with a discontiguous mask. */ + BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && + mask != ~((mask & -mask) - 1)); + gt64120_mem_resource.start = start; + gt64120_mem_resource.end = end; + gt64120_controller.mem_offset = (start & mask) - (map & mask); + /* Addresses are 36-bit, so do shifts in the destinations. */ + gt64120_mem_resource.start <<= GT_PCI_DCRM_SHF; + gt64120_mem_resource.end <<= GT_PCI_DCRM_SHF; + gt64120_mem_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1; + gt64120_controller.mem_offset <<= GT_PCI_DCRM_SHF; + + start = GT_READ(GT_PCI0IOLD_OFS); + end = GT_READ(GT_PCI0IOHD_OFS); + map = GT_READ(GT_PCI0IOREMAP_OFS); + end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK); + mask = ~(start ^ end); + /* We don't support remapping with a discontiguous mask. */ + BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && + mask != ~((mask & -mask) - 1)); + gt64120_io_resource.start = map & mask; + gt64120_io_resource.end = (map & mask) | ~mask; + gt64120_controller.io_offset = 0; + /* Addresses are 36-bit, so do shifts in the destinations. */ + gt64120_io_resource.start <<= GT_PCI_DCRM_SHF; + gt64120_io_resource.end <<= GT_PCI_DCRM_SHF; + gt64120_io_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1; + + controller = >64120_controller; + break; + + case MIPS_REVISION_SCON_BONITO: + /* Set up resource ranges from the controller's registers. */ + map = BONITO_PCIMAP; + map1 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO0) >> + BONITO_PCIMAP_PCIMAP_LO0_SHIFT; + map2 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO1) >> + BONITO_PCIMAP_PCIMAP_LO1_SHIFT; + map3 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO2) >> + BONITO_PCIMAP_PCIMAP_LO2_SHIFT; + /* Combine as many adjacent windows as possible. */ + map = map1; + start = BONITO_PCILO0_BASE; + end = 1; + if (map3 == map2 + 1) { + map = map2; + start = BONITO_PCILO1_BASE; + end++; + } + if (map2 == map1 + 1) { + map = map1; + start = BONITO_PCILO0_BASE; + end++; + } + bonito64_mem_resource.start = start; + bonito64_mem_resource.end = start + + BONITO_PCIMAP_WINBASE(end) - 1; + bonito64_controller.mem_offset = start - + BONITO_PCIMAP_WINBASE(map); + + controller = &bonito64_controller; + break; + + case MIPS_REVISION_SCON_SOCIT: + case MIPS_REVISION_SCON_ROCIT: + case MIPS_REVISION_SCON_SOCITSC: + case MIPS_REVISION_SCON_SOCITSCP: + /* Set up resource ranges from the controller's registers. */ + MSC_READ(MSC01_PCI_SC2PMBASL, start); + MSC_READ(MSC01_PCI_SC2PMMSKL, mask); + MSC_READ(MSC01_PCI_SC2PMMAPL, map); + msc_mem_resource.start = start & mask; + msc_mem_resource.end = (start & mask) | ~mask; + msc_controller.mem_offset = (start & mask) - (map & mask); + + MSC_READ(MSC01_PCI_SC2PIOBASL, start); + MSC_READ(MSC01_PCI_SC2PIOMSKL, mask); + MSC_READ(MSC01_PCI_SC2PIOMAPL, map); + msc_io_resource.start = map & mask; + msc_io_resource.end = (map & mask) | ~mask; + msc_controller.io_offset = 0; + ioport_resource.end = ~mask; + + /* If ranges overlap I/O takes precedence. */ + start = start & mask; + end = start | ~mask; + if ((start >= msc_mem_resource.start && + start <= msc_mem_resource.end) || + (end >= msc_mem_resource.start && + end <= msc_mem_resource.end)) { + /* Use the larger space. */ + start = max(start, msc_mem_resource.start); + end = min(end, msc_mem_resource.end); + if (start - msc_mem_resource.start >= + msc_mem_resource.end - end) + msc_mem_resource.end = start - 1; + else + msc_mem_resource.start = end + 1; + } + + controller = &msc_controller; + break; + default: + return; + } + + if (controller->io_resource->start < 0x00001000UL) /* FIXME */ + controller->io_resource->start = 0x00001000UL; + + iomem_resource.end &= 0xfffffffffULL; /* 64 GB */ + ioport_resource.end = controller->io_resource->end; + + register_pci_controller(controller); +} diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c new file mode 100644 index 000000000000..83b9bab3cd3f --- /dev/null +++ b/arch/mips/mti-malta/malta-platform.c @@ -0,0 +1,65 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 MIPS Technologies, Inc. + * written by Ralf Baechle (ralf@linux-mips.org) + * + * Probe driver for the Malta's UART ports: + * + * o 2 ports in the SMC SuperIO + * o 1 port in the CBUS UART, a discrete 16550 which normally is only used + * for bringups. + * + * We don't use 8250_platform.c on Malta as it would result in the CBUS + * UART becoming ttyS0. + */ +#include +#include +#include + +#define SMC_PORT(base, int) \ +{ \ + .iobase = base, \ + .irq = int, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +#define CBUS_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) + +static struct plat_serial8250_port uart8250_data[] = { + SMC_PORT(0x3F8, 4), + SMC_PORT(0x2F8, 3), + { + .mapbase = 0x1f000900, /* The CBUS UART */ + .irq = MIPS_CPU_IRQ_BASE + 2, + .uartclk = 3686400, /* Twice the usual clk! */ + .iotype = UPIO_MEM32, + .flags = CBUS_UART_FLAGS, + .regshift = 3, + }, + { }, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = uart8250_data, + }, +}; + +static int __init uart8250_init(void) +{ + return platform_device_register(&uart8250_device); +} + +module_init(uart8250_init); + +MODULE_AUTHOR("Ralf Baechle "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("8250 UART probe driver for the Malta CBUS UART"); diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c new file mode 100644 index 000000000000..42dee4da37ba --- /dev/null +++ b/arch/mips/mti-malta/malta-reset.c @@ -0,0 +1,56 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * Reset the MIPS boards. + * + */ +#include + +#include +#include +#include + +static void mips_machine_restart(char *command); +static void mips_machine_halt(void); + +static void mips_machine_restart(char *command) +{ + unsigned int __iomem *softres_reg = + ioremap(SOFTRES_REG, sizeof(unsigned int)); + + __raw_writel(GORESET, softres_reg); +} + +static void mips_machine_halt(void) +{ + unsigned int __iomem *softres_reg = + ioremap(SOFTRES_REG, sizeof(unsigned int)); + + __raw_writel(GORESET, softres_reg); +} + + +void mips_reboot_setup(void) +{ + _machine_restart = mips_machine_restart; + _machine_halt = mips_machine_halt; + pm_power_off = mips_machine_halt; +} diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c new file mode 100644 index 000000000000..e7cad54936ca --- /dev/null +++ b/arch/mips/mti-malta/malta-setup.c @@ -0,0 +1,229 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2008 Dmitri Vorobiev + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_VT +#include +#endif + +extern void malta_be_init(void); +extern int malta_be_handler(struct pt_regs *regs, int is_fixup); + +static struct resource standard_io_resources[] = { + { + .name = "dma1", + .start = 0x00, + .end = 0x1f, + .flags = IORESOURCE_BUSY + }, + { + .name = "timer", + .start = 0x40, + .end = 0x5f, + .flags = IORESOURCE_BUSY + }, + { + .name = "keyboard", + .start = 0x60, + .end = 0x6f, + .flags = IORESOURCE_BUSY + }, + { + .name = "dma page reg", + .start = 0x80, + .end = 0x8f, + .flags = IORESOURCE_BUSY + }, + { + .name = "dma2", + .start = 0xc0, + .end = 0xdf, + .flags = IORESOURCE_BUSY + }, +}; + +const char *get_system_type(void) +{ + return "MIPS Malta"; +} + +#if defined(CONFIG_MIPS_MT_SMTC) +const char display_string[] = " SMTC LINUX ON MALTA "; +#else +const char display_string[] = " LINUX ON MALTA "; +#endif /* CONFIG_MIPS_MT_SMTC */ + +#ifdef CONFIG_BLK_DEV_FD +static void __init fd_activate(void) +{ + /* + * Activate Floppy Controller in the SMSC FDC37M817 Super I/O + * Controller. + * Done by YAMON 2.00 onwards + */ + /* Entering config state. */ + SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG); + + /* Activate floppy controller. */ + SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG); + SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG); + SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG); + SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG); + + /* Exit config state. */ + SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG); +} +#endif + +#ifdef CONFIG_BLK_DEV_IDE +static void __init pci_clock_check(void) +{ + unsigned int __iomem *jmpr_p = + (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int)); + int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07; + static const int pciclocks[] __initdata = { + 33, 20, 25, 30, 12, 16, 37, 10 + }; + int pciclock = pciclocks[jmpr]; + char *argptr = prom_getcmdline(); + + if (pciclock != 33 && !strstr(argptr, "idebus=")) { + printk(KERN_WARNING "WARNING: PCI clock is %dMHz, " + "setting idebus\n", pciclock); + argptr += strlen(argptr); + sprintf(argptr, " idebus=%d", pciclock); + if (pciclock < 20 || pciclock > 66) + printk(KERN_WARNING "WARNING: IDE timing " + "calculations will be incorrect\n"); + } +} +#endif + +#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) +static void __init screen_info_setup(void) +{ + screen_info = (struct screen_info) { + .orig_x = 0, + .orig_y = 25, + .ext_mem_k = 0, + .orig_video_page = 0, + .orig_video_mode = 0, + .orig_video_cols = 80, + .unused2 = 0, + .orig_video_ega_bx = 0, + .unused3 = 0, + .orig_video_lines = 25, + .orig_video_isVGA = VIDEO_TYPE_VGAC, + .orig_video_points = 16 + }; +} +#endif + +static void __init bonito_quirks_setup(void) +{ + char *argptr; + + argptr = prom_getcmdline(); + if (strstr(argptr, "debug")) { + BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE; + printk(KERN_INFO "Enabled Bonito debug mode\n"); + } else + BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE; + +#ifdef CONFIG_DMA_COHERENT + if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) { + BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN; + printk(KERN_INFO "Enabled Bonito CPU coherency\n"); + + argptr = prom_getcmdline(); + if (strstr(argptr, "iobcuncached")) { + BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN; + BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & + ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | + BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); + printk(KERN_INFO "Disabled Bonito IOBC coherency\n"); + } else { + BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN; + BONITO_PCIMEMBASECFG |= + (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | + BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); + printk(KERN_INFO "Enabled Bonito IOBC coherency\n"); + } + } else + panic("Hardware DMA cache coherency not supported"); +#endif +} + +void __init plat_mem_setup(void) +{ + unsigned int i; + + mips_pcibios_init(); + + /* Request I/O space for devices used on the Malta board. */ + for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) + request_resource(&ioport_resource, standard_io_resources+i); + + /* + * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge. + */ + enable_dma(4); + +#ifdef CONFIG_KGDB + kgdb_config(); +#endif + +#ifdef CONFIG_DMA_COHERENT + if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO) + panic("Hardware DMA cache coherency not supported"); +#endif + + if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO) + bonito_quirks_setup(); + +#ifdef CONFIG_BLK_DEV_IDE + pci_clock_check(); +#endif + +#ifdef CONFIG_BLK_DEV_FD + fd_activate(); +#endif + +#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) + screen_info_setup(); +#endif + mips_reboot_setup(); + + board_be_init = malta_be_init; + board_be_handler = malta_be_handler; +} diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c new file mode 100644 index 000000000000..5ea705e49454 --- /dev/null +++ b/arch/mips/mti-malta/malta-smtc.c @@ -0,0 +1,154 @@ +/* + * Malta Platform-specific hooks for SMP operation + */ +#include +#include + +#include +#include +#include +#include + +/* VPE/SMP Prototype implements platform interfaces directly */ + +/* + * Cause the specified action to be performed on a targeted "CPU" + */ + +static void msmtc_send_ipi_single(int cpu, unsigned int action) +{ + /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ + smtc_send_ipi(cpu, LINUX_SMP_IPI, action); +} + +static void msmtc_send_ipi_mask(cpumask_t mask, unsigned int action) +{ + unsigned int i; + + for_each_cpu_mask(i, mask) + msmtc_send_ipi_single(i, action); +} + +/* + * Post-config but pre-boot cleanup entry point + */ +static void __cpuinit msmtc_init_secondary(void) +{ + void smtc_init_secondary(void); + int myvpe; + + /* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */ + myvpe = read_c0_tcbind() & TCBIND_CURVPE; + if (myvpe != 0) { + /* Ideally, this should be done only once per VPE, but... */ + clear_c0_status(ST0_IM); + set_c0_status((0x100 << cp0_compare_irq) + | (0x100 << MIPS_CPU_IPI_IRQ)); + if (cp0_perfcount_irq >= 0) + set_c0_status(0x100 << cp0_perfcount_irq); + } + + smtc_init_secondary(); +} + +/* + * Platform "CPU" startup hook + */ +static void __cpuinit msmtc_boot_secondary(int cpu, struct task_struct *idle) +{ + smtc_boot_secondary(cpu, idle); +} + +/* + * SMP initialization finalization entry point + */ +static void __cpuinit msmtc_smp_finish(void) +{ + smtc_smp_finish(); +} + +/* + * Hook for after all CPUs are online + */ + +static void msmtc_cpus_done(void) +{ +} + +/* + * Platform SMP pre-initialization + * + * As noted above, we can assume a single CPU for now + * but it may be multithreaded. + */ + +static void __init msmtc_smp_setup(void) +{ + mipsmt_build_cpu_map(0); +} + +static void __init msmtc_prepare_cpus(unsigned int max_cpus) +{ + mipsmt_prepare_cpus(); +} + +struct plat_smp_ops msmtc_smp_ops = { + .send_ipi_single = msmtc_send_ipi_single, + .send_ipi_mask = msmtc_send_ipi_mask, + .init_secondary = msmtc_init_secondary, + .smp_finish = msmtc_smp_finish, + .cpus_done = msmtc_cpus_done, + .boot_secondary = msmtc_boot_secondary, + .smp_setup = msmtc_smp_setup, + .prepare_cpus = msmtc_prepare_cpus, +}; + +#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF +/* + * IRQ affinity hook + */ + + +void plat_set_irq_affinity(unsigned int irq, cpumask_t affinity) +{ + cpumask_t tmask = affinity; + int cpu = 0; + void smtc_set_irq_affinity(unsigned int irq, cpumask_t aff); + + /* + * On the legacy Malta development board, all I/O interrupts + * are routed through the 8259 and combined in a single signal + * to the CPU daughterboard, and on the CoreFPGA2/3 34K models, + * that signal is brought to IP2 of both VPEs. To avoid racing + * concurrent interrupt service events, IP2 is enabled only on + * one VPE, by convention VPE0. So long as no bits are ever + * cleared in the affinity mask, there will never be any + * interrupt forwarding. But as soon as a program or operator + * sets affinity for one of the related IRQs, we need to make + * sure that we don't ever try to forward across the VPE boundry, + * at least not until we engineer a system where the interrupt + * _ack() or _end() function can somehow know that it corresponds + * to an interrupt taken on another VPE, and perform the appropriate + * restoration of Status.IM state using MFTR/MTTR instead of the + * normal local behavior. We also ensure that no attempt will + * be made to forward to an offline "CPU". + */ + + for_each_cpu_mask(cpu, affinity) { + if ((cpu_data[cpu].vpe_id != 0) || !cpu_online(cpu)) + cpu_clear(cpu, tmask); + } + irq_desc[irq].affinity = tmask; + + if (cpus_empty(tmask)) + /* + * We could restore a default mask here, but the + * runtime code can anyway deal with the null set + */ + printk(KERN_WARNING + "IRQ affinity leaves no legal CPU for IRQ %d\n", irq); + + /* Do any generic SMTC IRQ affinity setup */ + smtc_set_irq_affinity(irq, tmask); +} +#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c new file mode 100644 index 000000000000..0b97d47691fc --- /dev/null +++ b/arch/mips/mti-malta/malta-time.c @@ -0,0 +1,163 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Setting up the clock on the MIPS boards. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +unsigned long cpu_khz; + +static int mips_cpu_timer_irq; +static int mips_cpu_perf_irq; +extern int cp0_perfcount_irq; + +static void mips_timer_dispatch(void) +{ + do_IRQ(mips_cpu_timer_irq); +} + +static void mips_perf_dispatch(void) +{ + do_IRQ(mips_cpu_perf_irq); +} + +/* + * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect + */ +static unsigned int __init estimate_cpu_frequency(void) +{ + unsigned int prid = read_c0_prid() & 0xffff00; + unsigned int count; + + unsigned long flags; + unsigned int start; + + local_irq_save(flags); + + /* Start counter exactly on falling edge of update flag */ + while (CMOS_READ(RTC_REG_A) & RTC_UIP); + while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); + + /* Start r4k counter. */ + start = read_c0_count(); + + /* Read counter exactly on falling edge of update flag */ + while (CMOS_READ(RTC_REG_A) & RTC_UIP); + while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); + + count = read_c0_count() - start; + + /* restore interrupts */ + local_irq_restore(flags); + + mips_hpt_frequency = count; + if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && + (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) + count *= 2; + + count += 5000; /* round */ + count -= count%10000; + + return count; +} + +unsigned long read_persistent_clock(void) +{ + return mc146818_get_cmos_time(); +} + +static void __init plat_perf_setup(void) +{ +#ifdef MSC01E_INT_BASE + if (cpu_has_veic) { + set_vi_handler(MSC01E_INT_PERFCTR, mips_perf_dispatch); + mips_cpu_perf_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR; + } else +#endif + if (cp0_perfcount_irq >= 0) { + if (cpu_has_vint) + set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch); + mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq; +#ifdef CONFIG_SMP + set_irq_handler(mips_cpu_perf_irq, handle_percpu_irq); +#endif + } +} + +unsigned int __cpuinit get_c0_compare_int(void) +{ +#ifdef MSC01E_INT_BASE + if (cpu_has_veic) { + set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch); + mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR; + } else +#endif + { + if (cpu_has_vint) + set_vi_handler(cp0_compare_irq, mips_timer_dispatch); + mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; + } + + return mips_cpu_timer_irq; +} + +void __init plat_time_init(void) +{ + unsigned int est_freq; + + /* Set Data mode - binary. */ + CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); + + est_freq = estimate_cpu_frequency(); + + printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, + (est_freq%1000000)*100/1000000); + + cpu_khz = est_freq / 1000; + + mips_scroll_message(); +#ifdef CONFIG_I8253 /* Only Malta has a PIT */ + setup_pit_timer(); +#endif + + plat_perf_setup(); +} -- cgit v1.2.3 From 14476007c90005c8992b786c15a59cca31f53268 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 10 Jul 2008 01:02:08 +0900 Subject: [MIPS] txx9: Make gpio_txx9 entirely spinlock-safe TXx9 GPIO set/get routines are spinlock-safe. This patch make gpio_direction_{input,output} routines also spinlock-safe so that they can be used during early board setup. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/gpio_txx9.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/gpio_txx9.c b/arch/mips/kernel/gpio_txx9.c index b1436a857998..c6854d9df926 100644 --- a/arch/mips/kernel/gpio_txx9.c +++ b/arch/mips/kernel/gpio_txx9.c @@ -47,23 +47,25 @@ static void txx9_gpio_set(struct gpio_chip *chip, unsigned int offset, static int txx9_gpio_dir_in(struct gpio_chip *chip, unsigned int offset) { - spin_lock_irq(&txx9_gpio_lock); + unsigned long flags; + spin_lock_irqsave(&txx9_gpio_lock, flags); __raw_writel(__raw_readl(&txx9_pioptr->dir) & ~(1 << offset), &txx9_pioptr->dir); mmiowb(); - spin_unlock_irq(&txx9_gpio_lock); + spin_unlock_irqrestore(&txx9_gpio_lock, flags); return 0; } static int txx9_gpio_dir_out(struct gpio_chip *chip, unsigned int offset, int value) { - spin_lock_irq(&txx9_gpio_lock); + unsigned long flags; + spin_lock_irqsave(&txx9_gpio_lock, flags); txx9_gpio_set_raw(offset, value); __raw_writel(__raw_readl(&txx9_pioptr->dir) | (1 << offset), &txx9_pioptr->dir); mmiowb(); - spin_unlock_irq(&txx9_gpio_lock); + spin_unlock_irqrestore(&txx9_gpio_lock, flags); return 0; } -- cgit v1.2.3 From 22b1d707ffc99faebd86257ad19d5bb9fc624734 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 11 Jul 2008 00:31:36 +0900 Subject: [MIPS] TXx9: Reorganize code Move arch/mips/{jmr3927,tx4927,tx4938} into arch/mips/txx9/ tree. This will help more code sharing and maintainance. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 3 +- arch/mips/Makefile | 12 +- arch/mips/jmr3927/common/Makefile | 7 - arch/mips/jmr3927/common/prom.c | 72 -- arch/mips/jmr3927/common/puts.c | 60 -- arch/mips/jmr3927/rbhma3100/Makefile | 8 - arch/mips/jmr3927/rbhma3100/init.c | 57 - arch/mips/jmr3927/rbhma3100/irq.c | 174 --- arch/mips/jmr3927/rbhma3100/kgdb_io.c | 105 -- arch/mips/jmr3927/rbhma3100/setup.c | 445 -------- arch/mips/pci/Makefile | 2 +- arch/mips/pci/fixup-jmr3927.c | 2 +- arch/mips/pci/fixup-rbtx4927.c | 2 +- arch/mips/pci/fixup-rbtx4938.c | 92 ++ arch/mips/pci/fixup-tx4938.c | 92 -- arch/mips/pci/ops-tx3927.c | 2 +- arch/mips/pci/ops-tx4927.c | 2 +- arch/mips/pci/ops-tx4938.c | 2 +- arch/mips/pci/pci-jmr3927.c | 2 +- arch/mips/tx4927/Kconfig | 3 - arch/mips/tx4927/common/Makefile | 10 - arch/mips/tx4927/common/smsc_fdc37m81x.c | 172 --- arch/mips/tx4927/common/tx4927_dbgio.c | 43 - arch/mips/tx4927/common/tx4927_irq.c | 65 -- arch/mips/tx4927/common/tx4927_prom.c | 142 --- arch/mips/tx4927/toshiba_rbtx4927/Makefile | 5 - .../tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c | 216 ---- .../toshiba_rbtx4927/toshiba_rbtx4927_prom.c | 91 -- .../toshiba_rbtx4927/toshiba_rbtx4927_setup.c | 703 ------------ arch/mips/tx4938/Kconfig | 24 - arch/mips/tx4938/common/Makefile | 8 - arch/mips/tx4938/common/dbgio.c | 48 - arch/mips/tx4938/common/irq.c | 48 - arch/mips/tx4938/common/prom.c | 124 --- arch/mips/tx4938/toshiba_rbtx4938/Makefile | 7 - arch/mips/tx4938/toshiba_rbtx4938/irq.c | 161 --- arch/mips/tx4938/toshiba_rbtx4938/prom.c | 74 -- arch/mips/tx4938/toshiba_rbtx4938/setup.c | 1124 -------------------- arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c | 99 -- arch/mips/txx9/Kconfig | 28 + arch/mips/txx9/generic/Makefile | 10 + arch/mips/txx9/generic/dbgio.c | 48 + arch/mips/txx9/generic/irq_tx4927.c | 64 ++ arch/mips/txx9/generic/irq_tx4938.c | 48 + arch/mips/txx9/generic/mem_tx4927.c | 141 +++ arch/mips/txx9/generic/mem_tx4938.c | 124 +++ arch/mips/txx9/generic/smsc_fdc37m81x.c | 172 +++ arch/mips/txx9/jmr3927/Makefile | 8 + arch/mips/txx9/jmr3927/init.c | 57 + arch/mips/txx9/jmr3927/irq.c | 174 +++ arch/mips/txx9/jmr3927/kgdb_io.c | 105 ++ arch/mips/txx9/jmr3927/prom.c | 98 ++ arch/mips/txx9/jmr3927/setup.c | 445 ++++++++ arch/mips/txx9/rbtx4927/Makefile | 3 + arch/mips/txx9/rbtx4927/irq.c | 214 ++++ arch/mips/txx9/rbtx4927/prom.c | 91 ++ arch/mips/txx9/rbtx4927/setup.c | 703 ++++++++++++ arch/mips/txx9/rbtx4938/Makefile | 3 + arch/mips/txx9/rbtx4938/irq.c | 159 +++ arch/mips/txx9/rbtx4938/prom.c | 72 ++ arch/mips/txx9/rbtx4938/setup.c | 1122 +++++++++++++++++++ arch/mips/txx9/rbtx4938/spi_eeprom.c | 99 ++ 62 files changed, 4094 insertions(+), 4202 deletions(-) delete mode 100644 arch/mips/jmr3927/common/Makefile delete mode 100644 arch/mips/jmr3927/common/prom.c delete mode 100644 arch/mips/jmr3927/common/puts.c delete mode 100644 arch/mips/jmr3927/rbhma3100/Makefile delete mode 100644 arch/mips/jmr3927/rbhma3100/init.c delete mode 100644 arch/mips/jmr3927/rbhma3100/irq.c delete mode 100644 arch/mips/jmr3927/rbhma3100/kgdb_io.c delete mode 100644 arch/mips/jmr3927/rbhma3100/setup.c create mode 100644 arch/mips/pci/fixup-rbtx4938.c delete mode 100644 arch/mips/pci/fixup-tx4938.c delete mode 100644 arch/mips/tx4927/Kconfig delete mode 100644 arch/mips/tx4927/common/Makefile delete mode 100644 arch/mips/tx4927/common/smsc_fdc37m81x.c delete mode 100644 arch/mips/tx4927/common/tx4927_dbgio.c delete mode 100644 arch/mips/tx4927/common/tx4927_irq.c delete mode 100644 arch/mips/tx4927/common/tx4927_prom.c delete mode 100644 arch/mips/tx4927/toshiba_rbtx4927/Makefile delete mode 100644 arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c delete mode 100644 arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c delete mode 100644 arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c delete mode 100644 arch/mips/tx4938/Kconfig delete mode 100644 arch/mips/tx4938/common/Makefile delete mode 100644 arch/mips/tx4938/common/dbgio.c delete mode 100644 arch/mips/tx4938/common/irq.c delete mode 100644 arch/mips/tx4938/common/prom.c delete mode 100644 arch/mips/tx4938/toshiba_rbtx4938/Makefile delete mode 100644 arch/mips/tx4938/toshiba_rbtx4938/irq.c delete mode 100644 arch/mips/tx4938/toshiba_rbtx4938/prom.c delete mode 100644 arch/mips/tx4938/toshiba_rbtx4938/setup.c delete mode 100644 arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c create mode 100644 arch/mips/txx9/Kconfig create mode 100644 arch/mips/txx9/generic/Makefile create mode 100644 arch/mips/txx9/generic/dbgio.c create mode 100644 arch/mips/txx9/generic/irq_tx4927.c create mode 100644 arch/mips/txx9/generic/irq_tx4938.c create mode 100644 arch/mips/txx9/generic/mem_tx4927.c create mode 100644 arch/mips/txx9/generic/mem_tx4938.c create mode 100644 arch/mips/txx9/generic/smsc_fdc37m81x.c create mode 100644 arch/mips/txx9/jmr3927/Makefile create mode 100644 arch/mips/txx9/jmr3927/init.c create mode 100644 arch/mips/txx9/jmr3927/irq.c create mode 100644 arch/mips/txx9/jmr3927/kgdb_io.c create mode 100644 arch/mips/txx9/jmr3927/prom.c create mode 100644 arch/mips/txx9/jmr3927/setup.c create mode 100644 arch/mips/txx9/rbtx4927/Makefile create mode 100644 arch/mips/txx9/rbtx4927/irq.c create mode 100644 arch/mips/txx9/rbtx4927/prom.c create mode 100644 arch/mips/txx9/rbtx4927/setup.c create mode 100644 arch/mips/txx9/rbtx4938/Makefile create mode 100644 arch/mips/txx9/rbtx4938/irq.c create mode 100644 arch/mips/txx9/rbtx4938/prom.c create mode 100644 arch/mips/txx9/rbtx4938/setup.c create mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a0381427ec5c..3202960f7597 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -642,8 +642,7 @@ source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" -source "arch/mips/tx4927/Kconfig" -source "arch/mips/tx4938/Kconfig" +source "arch/mips/txx9/Kconfig" source "arch/mips/vr41xx/Kconfig" endmenu diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 36aa690484c8..8e1e49c5186b 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -553,8 +553,8 @@ all-$(CONFIG_SNI_RM) := vmlinux.ecoff # # Toshiba JMR-TX3927 board # -core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/jmr3927/rbhma3100/ \ - arch/mips/jmr3927/common/ +core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/txx9/jmr3927/ \ + arch/mips/txx9/generic/ cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927 load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000 @@ -562,16 +562,16 @@ load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000 # Toshiba RBTX4927 board or # Toshiba RBTX4937 board # -core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/toshiba_rbtx4927/ -core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/common/ +core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/rbtx4927/ +core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/generic/ cflags-$(CONFIG_TOSHIBA_RBTX4927) += -Iinclude/asm-mips/mach-tx49xx load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000 # # Toshiba RBTX4938 board # -core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/ -core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/ +core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/ +core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/generic/ cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000 diff --git a/arch/mips/jmr3927/common/Makefile b/arch/mips/jmr3927/common/Makefile deleted file mode 100644 index 8fd4fcccf10e..000000000000 --- a/arch/mips/jmr3927/common/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the common code of TOSHIBA JMR-TX3927 board -# - -obj-y += prom.o puts.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/jmr3927/common/prom.c b/arch/mips/jmr3927/common/prom.c deleted file mode 100644 index 5398813e50e6..000000000000 --- a/arch/mips/jmr3927/common/prom.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * PROM library initialisation code, assuming a version of - * pmon is the boot code. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * Based on arch/mips/au1000/common/prom.c - * - * This file was derived from Carsten Langgaard's - * arch/mips/mips-boards/xx files. - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include - -#include - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - int prom_argc = fw_arg0; - char **prom_argv = (char **) fw_arg1; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { - strcpy(cp, prom_argv[actr]); - cp += strlen(prom_argv[actr]); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ - --cp; - *cp = '\0'; -} - -void __init prom_free_prom_memory(void) -{ -} diff --git a/arch/mips/jmr3927/common/puts.c b/arch/mips/jmr3927/common/puts.c deleted file mode 100644 index c611ab497888..000000000000 --- a/arch/mips/jmr3927/common/puts.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Low level uart routines to directly access a TX[34]927 SIO. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com or source@mvista.com - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * Based on arch/mips/au1000/common/puts.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#define TIMEOUT 0xffffff - -void -prom_putchar(char c) -{ - int i = 0; - - do { - i++; - if (i>TIMEOUT) - break; - } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS)); - tx3927_sioptr(1)->tfifo = c; - return; -} - -void -puts(const char *cp) -{ - while (*cp) - prom_putchar(*cp++); - prom_putchar('\r'); - prom_putchar('\n'); -} diff --git a/arch/mips/jmr3927/rbhma3100/Makefile b/arch/mips/jmr3927/rbhma3100/Makefile deleted file mode 100644 index d86e30dca8f3..000000000000 --- a/arch/mips/jmr3927/rbhma3100/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for TOSHIBA JMR-TX3927 board -# - -obj-y += init.o irq.o setup.o -obj-$(CONFIG_KGDB) += kgdb_io.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/jmr3927/rbhma3100/init.c b/arch/mips/jmr3927/rbhma3100/init.c deleted file mode 100644 index 700b9cf8eb9d..000000000000 --- a/arch/mips/jmr3927/rbhma3100/init.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * arch/mips/jmr3927/common/init.c - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include - -extern void __init prom_init_cmdline(void); - -const char *get_system_type(void) -{ - return "Toshiba" -#ifdef CONFIG_TOSHIBA_JMR3927 - " JMR_TX3927" -#endif - ; -} - -extern void puts(const char *cp); - -void __init prom_init(void) -{ -#ifdef CONFIG_TOSHIBA_JMR3927 - /* CCFG */ - if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) - puts("Warning: TX3927 TLB off\n"); -#endif - - prom_init_cmdline(); - add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); -} diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c deleted file mode 100644 index 3a47e8ce1196..000000000000 --- a/arch/mips/jmr3927/rbhma3100/irq.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#if JMR3927_IRQ_END > NR_IRQS -#error JMR3927_IRQ_END > NR_IRQS -#endif - -static unsigned char irc_level[TX3927_NUM_IR] = { - 5, 5, 5, 5, 5, 5, /* INT[5:0] */ - 7, 7, /* SIO */ - 5, 5, 5, 0, 0, /* DMA, PIO, PCI */ - 6, 6, 6 /* TMR */ -}; - -/* - * CP0_STATUS is a thread's resource (saved/restored on context switch). - * So disable_irq/enable_irq MUST handle IOC/IRC registers. - */ -static void mask_irq_ioc(unsigned int irq) -{ - /* 0: mask */ - unsigned int irq_nr = irq - JMR3927_IRQ_IOC; - unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR); - unsigned int bit = 1 << irq_nr; - jmr3927_ioc_reg_out(imask & ~bit, JMR3927_IOC_INTM_ADDR); - /* flush write buffer */ - (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); -} -static void unmask_irq_ioc(unsigned int irq) -{ - /* 0: mask */ - unsigned int irq_nr = irq - JMR3927_IRQ_IOC; - unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR); - unsigned int bit = 1 << irq_nr; - jmr3927_ioc_reg_out(imask | bit, JMR3927_IOC_INTM_ADDR); - /* flush write buffer */ - (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned long cp0_cause = read_c0_cause(); - int irq; - - if ((cp0_cause & CAUSEF_IP7) == 0) - return; - irq = (cp0_cause >> CAUSEB_IP2) & 0x0f; - - do_IRQ(irq + JMR3927_IRQ_IRC); -} - -static irqreturn_t jmr3927_ioc_interrupt(int irq, void *dev_id) -{ - unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR); - int i; - - for (i = 0; i < JMR3927_NR_IRQ_IOC; i++) { - if (istat & (1 << i)) { - irq = JMR3927_IRQ_IOC + i; - do_IRQ(irq); - } - } - return IRQ_HANDLED; -} - -static struct irqaction ioc_action = { - .handler = jmr3927_ioc_interrupt, - .mask = CPU_MASK_NONE, - .name = "IOC", -}; - -static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id) -{ - printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq); - printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n", - tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat); - - return IRQ_HANDLED; -} -static struct irqaction pcierr_action = { - .handler = jmr3927_pcierr_interrupt, - .mask = CPU_MASK_NONE, - .name = "PCI error", -}; - -static void __init jmr3927_irq_init(void); - -void __init arch_init_irq(void) -{ - /* Now, interrupt control disabled, */ - /* all IRC interrupts are masked, */ - /* all IRC interrupt mode are Low Active. */ - - /* mask all IOC interrupts */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_INTM_ADDR); - /* setup IOC interrupt mode (SOFT:High Active, Others:Low Active) */ - jmr3927_ioc_reg_out(JMR3927_IOC_INTF_SOFT, JMR3927_IOC_INTP_ADDR); - - /* clear PCI Soft interrupts */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_INTS1_ADDR); - /* clear PCI Reset interrupts */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - - jmr3927_irq_init(); - - /* setup IOC interrupt 1 (PCI, MODEM) */ - setup_irq(JMR3927_IRQ_IOCINT, &ioc_action); - -#ifdef CONFIG_PCI - setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action); -#endif - - /* enable all CPU interrupt bits. */ - set_c0_status(ST0_IM); /* IE bit is still 0. */ -} - -static struct irq_chip jmr3927_irq_ioc = { - .name = "jmr3927_ioc", - .ack = mask_irq_ioc, - .mask = mask_irq_ioc, - .mask_ack = mask_irq_ioc, - .unmask = unmask_irq_ioc, -}; - -static void __init jmr3927_irq_init(void) -{ - u32 i; - - txx9_irq_init(TX3927_IRC_REG); - for (i = 0; i < TXx9_MAX_IR; i++) - txx9_irq_set_pri(i, irc_level[i]); - for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++) - set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq); -} diff --git a/arch/mips/jmr3927/rbhma3100/kgdb_io.c b/arch/mips/jmr3927/rbhma3100/kgdb_io.c deleted file mode 100644 index 342579cfdc01..000000000000 --- a/arch/mips/jmr3927/rbhma3100/kgdb_io.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Low level uart routines to directly access a TX[34]927 SIO. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com or source@mvista.com - * - * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#define TIMEOUT 0xffffff - -static int remoteDebugInitialized = 0; -static void debugInit(int baud); - -int putDebugChar(unsigned char c) -{ - int i = 0; - - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(38400); - } - - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS)); - tx3927_sioptr(0)->tfifo = c; - - return 1; -} - -unsigned char getDebugChar(void) -{ - int i = 0; - int dicr; - char c; - - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(38400); - } - - /* diable RX int. */ - dicr = tx3927_sioptr(0)->dicr; - tx3927_sioptr(0)->dicr = 0; - - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID) - ; - c = tx3927_sioptr(0)->rfifo; - - /* clear RX int. status */ - tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS; - /* enable RX int. */ - tx3927_sioptr(0)->dicr = dicr; - - return c; -} - -static void debugInit(int baud) -{ - tx3927_sioptr(0)->lcr = 0x020; - tx3927_sioptr(0)->dicr = 0; - tx3927_sioptr(0)->disr = 0x4100; - tx3927_sioptr(0)->cisr = 0x014; - tx3927_sioptr(0)->fcr = 0; - tx3927_sioptr(0)->flcr = 0x02; - tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) | - TXx927_SIBGR_BCLK_T0; -} diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c deleted file mode 100644 index f39c444e42d4..000000000000 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ /dev/null @@ -1,445 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * Copyright (C) 2000-2001 Toshiba Corporation - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_SERIAL_TXX9 -#include -#endif - -#include -#include -#include -#include -#include - -extern void puts(const char *cp); - -/* don't enable - see errata */ -static int jmr3927_ccfg_toeon; - -static inline void do_reset(void) -{ -#if 1 /* Resetting PCI bus */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR); - (void)jmr3927_ioc_reg_in(JMR3927_IOC_RESET_ADDR); /* flush WB */ - mdelay(1); - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); -#endif - jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR); -} - -static void jmr3927_machine_restart(char *command) -{ - local_irq_disable(); - puts("Rebooting..."); - do_reset(); -} - -static void jmr3927_machine_halt(void) -{ - puts("JMR-TX3927 halted.\n"); - while (1); -} - -static void jmr3927_machine_power_off(void) -{ - puts("JMR-TX3927 halted. Please turn off the power.\n"); - while (1); -} - -void __init plat_time_init(void) -{ - txx9_clockevent_init(TX3927_TMR_REG(0), - TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0), - JMR3927_IMCLK); - txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK); -} - -#define DO_WRITE_THROUGH -#define DO_ENABLE_CACHE - -extern char * __init prom_getcmdline(void); -static void jmr3927_board_init(void); -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; - -void __init plat_mem_setup(void) -{ - char *argptr; - - set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO); - - _machine_restart = jmr3927_machine_restart; - _machine_halt = jmr3927_machine_halt; - pm_power_off = jmr3927_machine_power_off; - - /* - * IO/MEM resources. - */ - ioport_resource.start = pci_io_resource.start; - ioport_resource.end = pci_io_resource.end; - iomem_resource.start = 0; - iomem_resource.end = 0xffffffff; - - /* Reboot on panic */ - panic_timeout = 180; - - /* cache setup */ - { - unsigned int conf; -#ifdef DO_ENABLE_CACHE - int mips_ic_disable = 0, mips_dc_disable = 0; -#else - int mips_ic_disable = 1, mips_dc_disable = 1; -#endif -#ifdef DO_WRITE_THROUGH - int mips_config_cwfon = 0; - int mips_config_wbon = 0; -#else - int mips_config_cwfon = 1; - int mips_config_wbon = 1; -#endif - - conf = read_c0_conf(); - conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON); - conf |= mips_ic_disable ? 0 : TX39_CONF_ICE; - conf |= mips_dc_disable ? 0 : TX39_CONF_DCE; - conf |= mips_config_wbon ? TX39_CONF_WBON : 0; - conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0; - - write_c0_conf(conf); - write_c0_cache(0); - } - - /* initialize board */ - jmr3927_board_init(); - - argptr = prom_getcmdline(); - - if ((argptr = strstr(argptr, "toeon")) != NULL) - jmr3927_ccfg_toeon = 1; - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "ip=")) == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " ip=bootp"); - } - -#ifdef CONFIG_SERIAL_TXX9 - { - extern int early_serial_txx9_setup(struct uart_port *port); - int i; - struct uart_port req; - for(i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i); - req.mapbase = TX3927_SIO_REG(i); - req.irq = i == 0 ? - JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1; - if (i == 0) - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = JMR3927_IMCLK; - early_serial_txx9_setup(&req); - } - } -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "console=")) == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS1,115200"); - } -#endif -#endif -} - -static void tx3927_setup(void); - -static void __init jmr3927_board_init(void) -{ - tx3927_setup(); - - /* SIO0 DTR on */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); - - jmr3927_led_set(0); - - printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", - jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, - jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, - jmr3927_dipsw1(), jmr3927_dipsw2(), - jmr3927_dipsw3(), jmr3927_dipsw4()); -} - -static void __init tx3927_setup(void) -{ - int i; -#ifdef CONFIG_PCI - unsigned long mips_pci_io_base = JMR3927_PCIIO; - unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE; - unsigned long mips_pci_mem_base = JMR3927_PCIMEM; - unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE; - /* for legacy I/O, PCI I/O PCI Bus address must be 0 */ - unsigned long mips_pci_io_pciaddr = 0; -#endif - - /* SDRAMC are configured by PROM */ - - /* ROMC */ - tx3927_romcptr->cr[1] = JMR3927_ROMCE1 | 0x00030048; - tx3927_romcptr->cr[2] = JMR3927_ROMCE2 | 0x000064c8; - tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698; - tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218; - - /* CCFG */ - /* enable Timeout BusError */ - if (jmr3927_ccfg_toeon) - tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; - - /* clear BusErrorOnWrite flag */ - tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; - /* Disable PCI snoop */ - tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; - /* do reset on watchdog */ - tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; - -#ifdef DO_WRITE_THROUGH - /* Enable PCI SNOOP - with write through only */ - tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; -#endif - - /* Pin selection */ - tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL; - tx3927_ccfgptr->pcfg |= - TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL | - (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1)); - - printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", - tx3927_ccfgptr->crir, - tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); - - /* TMR */ - for (i = 0; i < TX3927_NR_TMR; i++) - txx9_tmr_init(TX3927_TMR_REG(i)); - - /* DMA */ - tx3927_dmaptr->mcr = 0; - for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { - /* reset channel */ - tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; - tx3927_dmaptr->ch[i].ccr = 0; - } - /* enable DMA */ -#ifdef __BIG_ENDIAN - tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; -#else - tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; -#endif - -#ifdef CONFIG_PCI - /* PCIC */ - printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:", - tx3927_pcicptr->did, tx3927_pcicptr->vid, - tx3927_pcicptr->rid); - if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) { - printk("External\n"); - /* XXX */ - } else { - printk("Internal\n"); - - /* Reset PCI Bus */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - udelay(100); - jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, - JMR3927_IOC_RESET_ADDR); - udelay(100); - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - - - /* Disable External PCI Config. Access */ - tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD; -#ifdef __BIG_ENDIAN - tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE | - TX3927_PCIC_LBC_TIBSE | - TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE; -#endif - /* LB->PCI mappings */ - tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1); - tx3927_pcicptr->ilbioma = mips_pci_io_base; - tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr; - tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1); - tx3927_pcicptr->ilbmma = mips_pci_mem_base; - tx3927_pcicptr->ipbmma = mips_pci_mem_base; - /* PCI->LB mappings */ - tx3927_pcicptr->iobas = 0xffffffff; - tx3927_pcicptr->ioba = 0; - tx3927_pcicptr->tlbioma = 0; - tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1); - tx3927_pcicptr->mba = 0; - tx3927_pcicptr->tlbmma = 0; - /* Enable Direct mapping Address Space Decoder */ - tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE; - - /* Clear All Local Bus Status */ - tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL; - /* Enable All Local Bus Interrupts */ - tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL; - /* Clear All PCI Status Error */ - tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL; - /* Enable All PCI Status Error Interrupts */ - tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL; - - /* PCIC Int => IRC IRQ10 */ - tx3927_pcicptr->il = TX3927_IR_PCI; - /* Target Control (per errata) */ - tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E; - - /* Enable Bus Arbiter */ - tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN; - - tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | - PCI_COMMAND_IO | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - } -#endif /* CONFIG_PCI */ - - /* PIO */ - /* PIO[15:12] connected to LEDs */ - __raw_writel(0x0000f000, &tx3927_pioptr->dir); - __raw_writel(0, &tx3927_pioptr->maskcpu); - __raw_writel(0, &tx3927_pioptr->maskext); - txx9_gpio_init(TX3927_PIO_REG, 0, 16); - gpio_request(11, "dipsw1"); - gpio_request(10, "dipsw2"); - { - unsigned int conf; - - conf = read_c0_conf(); - if (!(conf & TX39_CONF_ICE)) - printk("TX3927 I-Cache disabled.\n"); - if (!(conf & TX39_CONF_DCE)) - printk("TX3927 D-Cache disabled.\n"); - else if (!(conf & TX39_CONF_WBON)) - printk("TX3927 D-Cache WriteThrough.\n"); - else if (!(conf & TX39_CONF_CWFON)) - printk("TX3927 D-Cache WriteBack.\n"); - else - printk("TX3927 D-Cache WriteBack (CWF) .\n"); - } -} - -/* This trick makes rtc-ds1742 driver usable as is. */ -unsigned long __swizzle_addr_b(unsigned long port) -{ - if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR) - return port; - port = (port & 0xffff0000) | (port & 0x7fff << 1); -#ifdef __BIG_ENDIAN - return port; -#else - return port | 1; -#endif -} -EXPORT_SYMBOL(__swizzle_addr_b); - -static int __init jmr3927_rtc_init(void) -{ - static struct resource __initdata res = { - .start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE, - .end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev; - dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} -device_initcall(jmr3927_rtc_init); - -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init jmr3927_wdt_init(void) -{ - return txx9_wdt_init(TX3927_TMR_REG(2)); -} -device_initcall(jmr3927_wdt_init); - -/* Minimum CLK support */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "imbus_clk")) - return (struct clk *)JMR3927_IMCLK; - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return (unsigned long)clk; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 80fa5abb25d4..4608e43de28c 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -43,7 +43,7 @@ obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o pci-jmr3927.o obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o ops-tx4927.o -obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-tx4938.o ops-tx4938.o +obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o ops-tx4938.o obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c index e974394be7bc..41dcd6a3aae5 100644 --- a/arch/mips/pci/fixup-jmr3927.c +++ b/arch/mips/pci/fixup-jmr3927.c @@ -31,7 +31,7 @@ #include #include -#include +#include int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c index 2d234ca017db..26013badfe1f 100644 --- a/arch/mips/pci/fixup-rbtx4927.c +++ b/arch/mips/pci/fixup-rbtx4927.c @@ -37,7 +37,7 @@ #include #include -#include +#include #undef DEBUG #ifdef DEBUG diff --git a/arch/mips/pci/fixup-rbtx4938.c b/arch/mips/pci/fixup-rbtx4938.c new file mode 100644 index 000000000000..64d4510c0265 --- /dev/null +++ b/arch/mips/pci/fixup-rbtx4938.c @@ -0,0 +1,92 @@ +/* + * Toshiba rbtx4938 pci routines + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#include +#include +#include +#include + +#include + +extern struct pci_controller tx4938_pci_controller[]; + +static int pci_get_irq(const struct pci_dev *dev, int pin) +{ + int irq = pin; + u8 slot = PCI_SLOT(dev->devfn); + struct pci_controller *controller = (struct pci_controller *)dev->sysdata; + + if (controller == &tx4938_pci_controller[1]) { + /* TX4938 PCIC1 */ + switch (slot) { + case TX4938_PCIC_IDSEL_AD_TO_SLOT(31): + if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL) + return RBTX4938_IRQ_IRC + TX4938_IR_ETH0; + break; + case TX4938_PCIC_IDSEL_AD_TO_SLOT(30): + if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL) + return RBTX4938_IRQ_IRC + TX4938_IR_ETH1; + break; + } + return 0; + } + + /* IRQ rotation */ + irq--; /* 0-3 */ + if (dev->bus->parent == NULL && + (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) { + /* PCI CardSlot (IDSEL=A23) */ + /* PCIA => PCIA (IDSEL=A23) */ + irq = (irq + 0 + slot) % 4; + } else { + /* PCI Backplane */ + irq = (irq + 33 - slot) % 4; + } + irq++; /* 1-4 */ + + switch (irq) { + case 1: + irq = RBTX4938_IRQ_IOC_PCIA; + break; + case 2: + irq = RBTX4938_IRQ_IOC_PCIB; + break; + case 3: + irq = RBTX4938_IRQ_IOC_PCIC; + break; + case 4: + irq = RBTX4938_IRQ_IOC_PCID; + break; + } + return irq; +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + unsigned char irq = 0; + + irq = pci_get_irq(dev, pin); + + printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n", + dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn), + PCI_FUNC(dev->devfn), irq); + + return irq; +} + +/* + * Do platform specific device initialization at pci_enable_device() time + */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + diff --git a/arch/mips/pci/fixup-tx4938.c b/arch/mips/pci/fixup-tx4938.c deleted file mode 100644 index f2ba06ee0c10..000000000000 --- a/arch/mips/pci/fixup-tx4938.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Toshiba rbtx4938 pci routines - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include - -#include - -extern struct pci_controller tx4938_pci_controller[]; - -static int pci_get_irq(const struct pci_dev *dev, int pin) -{ - int irq = pin; - u8 slot = PCI_SLOT(dev->devfn); - struct pci_controller *controller = (struct pci_controller *)dev->sysdata; - - if (controller == &tx4938_pci_controller[1]) { - /* TX4938 PCIC1 */ - switch (slot) { - case TX4938_PCIC_IDSEL_AD_TO_SLOT(31): - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL) - return RBTX4938_IRQ_IRC + TX4938_IR_ETH0; - break; - case TX4938_PCIC_IDSEL_AD_TO_SLOT(30): - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL) - return RBTX4938_IRQ_IRC + TX4938_IR_ETH1; - break; - } - return 0; - } - - /* IRQ rotation */ - irq--; /* 0-3 */ - if (dev->bus->parent == NULL && - (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) { - /* PCI CardSlot (IDSEL=A23) */ - /* PCIA => PCIA (IDSEL=A23) */ - irq = (irq + 0 + slot) % 4; - } else { - /* PCI Backplane */ - irq = (irq + 33 - slot) % 4; - } - irq++; /* 1-4 */ - - switch (irq) { - case 1: - irq = RBTX4938_IRQ_IOC_PCIA; - break; - case 2: - irq = RBTX4938_IRQ_IOC_PCIB; - break; - case 3: - irq = RBTX4938_IRQ_IOC_PCIC; - break; - case 4: - irq = RBTX4938_IRQ_IOC_PCID; - break; - } - return irq; -} - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - unsigned char irq = 0; - - irq = pci_get_irq(dev, pin); - - printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n", - dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn), - PCI_FUNC(dev->devfn), irq); - - return irq; -} - -/* - * Do platform specific device initialization at pci_enable_device() time - */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} - diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index aa698bd0d5e3..5d398f694682 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -39,7 +39,7 @@ #include #include -#include +#include static inline int mkaddr(unsigned char bus, unsigned char dev_fn, unsigned char where) diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index 1bbafeb4a774..54730eee451b 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -40,7 +40,7 @@ #include #include #include -#include +#include /* initialize in setup */ struct resource pci_io_resource = { diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c index a450c4062031..34494b82cb22 100644 --- a/arch/mips/pci/ops-tx4938.c +++ b/arch/mips/pci/ops-tx4938.c @@ -15,7 +15,7 @@ #include #include -#include +#include /* initialize in setup */ struct resource pci_io_resource = { diff --git a/arch/mips/pci/pci-jmr3927.c b/arch/mips/pci/pci-jmr3927.c index cb84f4e8ccae..7fb6bd71901a 100644 --- a/arch/mips/pci/pci-jmr3927.c +++ b/arch/mips/pci/pci-jmr3927.c @@ -31,7 +31,7 @@ #include #include -#include +#include #include struct resource pci_io_resource = { diff --git a/arch/mips/tx4927/Kconfig b/arch/mips/tx4927/Kconfig deleted file mode 100644 index 5fbbe12e0fc1..000000000000 --- a/arch/mips/tx4927/Kconfig +++ /dev/null @@ -1,3 +0,0 @@ -config TOSHIBA_FPCIB0 - bool "FPCIB0 Backplane Support" - depends on TOSHIBA_RBTX4927 diff --git a/arch/mips/tx4927/common/Makefile b/arch/mips/tx4927/common/Makefile deleted file mode 100644 index a7fe76a64964..000000000000 --- a/arch/mips/tx4927/common/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# Makefile for common code for Toshiba TX4927 based systems -# - -obj-y += tx4927_prom.o tx4927_irq.o - -obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o -obj-$(CONFIG_KGDB) += tx4927_dbgio.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4927/common/smsc_fdc37m81x.c b/arch/mips/tx4927/common/smsc_fdc37m81x.c deleted file mode 100644 index 33f517bc9a08..000000000000 --- a/arch/mips/tx4927/common/smsc_fdc37m81x.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Interface for smsc fdc48m81x Super IO chip - * - * Author: MontaVista Software, Inc. source@mvista.com - * - * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Copyright 2004 (c) MontaVista Software, Inc. - */ -#include -#include -#include -#include - -#define DEBUG - -/* Common Registers */ -#define SMSC_FDC37M81X_CONFIG_INDEX 0x00 -#define SMSC_FDC37M81X_CONFIG_DATA 0x01 -#define SMSC_FDC37M81X_CONF 0x02 -#define SMSC_FDC37M81X_INDEX 0x03 -#define SMSC_FDC37M81X_DNUM 0x07 -#define SMSC_FDC37M81X_DID 0x20 -#define SMSC_FDC37M81X_DREV 0x21 -#define SMSC_FDC37M81X_PCNT 0x22 -#define SMSC_FDC37M81X_PMGT 0x23 -#define SMSC_FDC37M81X_OSC 0x24 -#define SMSC_FDC37M81X_CONFPA0 0x26 -#define SMSC_FDC37M81X_CONFPA1 0x27 -#define SMSC_FDC37M81X_TEST4 0x2B -#define SMSC_FDC37M81X_TEST5 0x2C -#define SMSC_FDC37M81X_TEST1 0x2D -#define SMSC_FDC37M81X_TEST2 0x2E -#define SMSC_FDC37M81X_TEST3 0x2F - -/* Logical device numbers */ -#define SMSC_FDC37M81X_FDD 0x00 -#define SMSC_FDC37M81X_SERIAL1 0x04 -#define SMSC_FDC37M81X_SERIAL2 0x05 -#define SMSC_FDC37M81X_KBD 0x07 - -/* Logical device Config Registers */ -#define SMSC_FDC37M81X_ACTIVE 0x30 -#define SMSC_FDC37M81X_BASEADDR0 0x60 -#define SMSC_FDC37M81X_BASEADDR1 0x61 -#define SMSC_FDC37M81X_INT 0x70 -#define SMSC_FDC37M81X_INT2 0x72 -#define SMSC_FDC37M81X_MODE 0xF0 - -/* Chip Config Values */ -#define SMSC_FDC37M81X_CONFIG_ENTER 0x55 -#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa -#define SMSC_FDC37M81X_CHIP_ID 0x4d - -static unsigned long g_smsc_fdc37m81x_base = 0; - -static inline unsigned char smsc_fdc37m81x_rd(unsigned char index) -{ - outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); - - return inb(g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA); -} - -static inline void smsc_dc37m81x_wr(unsigned char index, unsigned char data) -{ - outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); - outb(data, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA); -} - -void smsc_fdc37m81x_config_beg(void) -{ - if (g_smsc_fdc37m81x_base) { - outb(SMSC_FDC37M81X_CONFIG_ENTER, - g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); - } -} - -void smsc_fdc37m81x_config_end(void) -{ - if (g_smsc_fdc37m81x_base) - outb(SMSC_FDC37M81X_CONFIG_EXIT, - g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); -} - -u8 smsc_fdc37m81x_config_get(u8 reg) -{ - u8 val = 0; - - if (g_smsc_fdc37m81x_base) - val = smsc_fdc37m81x_rd(reg); - - return val; -} - -void smsc_fdc37m81x_config_set(u8 reg, u8 val) -{ - if (g_smsc_fdc37m81x_base) - smsc_dc37m81x_wr(reg, val); -} - -unsigned long __init smsc_fdc37m81x_init(unsigned long port) -{ - const int field = sizeof(unsigned long) * 2; - u8 chip_id; - - if (g_smsc_fdc37m81x_base) - printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n", - field, g_smsc_fdc37m81x_base); - - g_smsc_fdc37m81x_base = port; - - smsc_fdc37m81x_config_beg(); - - chip_id = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DID); - if (chip_id == SMSC_FDC37M81X_CHIP_ID) - smsc_fdc37m81x_config_end(); - else { - printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n", - chip_id); - g_smsc_fdc37m81x_base = 0; - } - - return g_smsc_fdc37m81x_base; -} - -#ifdef DEBUG -void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg) -{ - printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg, - smsc_fdc37m81x_rd(reg)); -} - -void smsc_fdc37m81x_config_dump(void) -{ - u8 orig; - char *fname = "smsc_fdc37m81x_config_dump()"; - - smsc_fdc37m81x_config_beg(); - - orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM); - - printk("%s: common\n", fname); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, - SMSC_FDC37M81X_DNUM); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, - SMSC_FDC37M81X_DID); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, - SMSC_FDC37M81X_DREV); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, - SMSC_FDC37M81X_PCNT); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, - SMSC_FDC37M81X_PMGT); - - printk("%s: keyboard\n", fname); - smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, - SMSC_FDC37M81X_ACTIVE); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, - SMSC_FDC37M81X_INT); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, - SMSC_FDC37M81X_INT2); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, - SMSC_FDC37M81X_LDCR_F0); - - smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, orig); - - smsc_fdc37m81x_config_end(); -} -#endif diff --git a/arch/mips/tx4927/common/tx4927_dbgio.c b/arch/mips/tx4927/common/tx4927_dbgio.c deleted file mode 100644 index ea1ff23f4b72..000000000000 --- a/arch/mips/tx4927/common/tx4927_dbgio.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * linux/arch/mips/tx4927/common/tx4927_dbgio.c - * - * kgdb interface for gdb - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include - -u8 getDebugChar(void) -{ - extern u8 txx9_sio_kdbg_rd(void); - return (txx9_sio_kdbg_rd()); -} - -int putDebugChar(u8 byte) -{ - extern int txx9_sio_kdbg_wr( u8 ch ); - return (txx9_sio_kdbg_wr(byte)); -} diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/tx4927/common/tx4927_irq.c deleted file mode 100644 index 0aabd57fdad2..000000000000 --- a/arch/mips/tx4927/common/tx4927_irq.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Common tx4927 irq handler - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include -#ifdef CONFIG_TOSHIBA_RBTX4927 -#include -#endif - -void __init tx4927_irq_init(void) -{ - mips_cpu_irq_init(); - txx9_irq_init(TX4927_IRC_REG); - set_irq_chained_handler(TX4927_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP7) /* cpu timer */ - do_IRQ(TX4927_IRQ_CPU_TIMER); - else if (pending & STATUSF_IP2) { /* tx4927 pic */ - int irq = txx9_irq(); -#ifdef CONFIG_TOSHIBA_RBTX4927 - if (irq == TX4927_IRQ_NEST_EXT_ON_PIC) - irq = toshiba_rbtx4927_irq_nested(irq); -#endif - if (unlikely(irq < 0)) { - spurious_interrupt(); - return; - } - do_IRQ(irq); - } else if (pending & STATUSF_IP0) /* user line 0 */ - do_IRQ(TX4927_IRQ_USER0); - else if (pending & STATUSF_IP1) /* user line 1 */ - do_IRQ(TX4927_IRQ_USER1); - else - spurious_interrupt(); -} diff --git a/arch/mips/tx4927/common/tx4927_prom.c b/arch/mips/tx4927/common/tx4927_prom.c deleted file mode 100644 index cc2aa9d63e82..000000000000 --- a/arch/mips/tx4927/common/tx4927_prom.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * linux/arch/mips/tx4927/common/tx4927_prom.c - * - * common tx4927 memory interface - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include - -static unsigned int __init tx4927_process_sdccr(unsigned long addr) -{ - u64 val; - unsigned int sdccr_ce; - unsigned int sdccr_bs; - unsigned int sdccr_rs; - unsigned int sdccr_cs; - unsigned int sdccr_mw; - unsigned int bs = 0; - unsigned int rs = 0; - unsigned int cs = 0; - unsigned int mw = 0; - unsigned int msize = 0; - - val = __raw_readq((void __iomem *)addr); - - /* MVMCP -- need #defs for these bits masks */ - sdccr_ce = ((val & (1 << 10)) >> 10); - sdccr_bs = ((val & (1 << 8)) >> 8); - sdccr_rs = ((val & (3 << 5)) >> 5); - sdccr_cs = ((val & (3 << 2)) >> 2); - sdccr_mw = ((val & (1 << 0)) >> 0); - - if (sdccr_ce) { - switch (sdccr_bs) { - case 0:{ - bs = 2; - break; - } - case 1:{ - bs = 4; - break; - } - } - switch (sdccr_rs) { - case 0:{ - rs = 2048; - break; - } - case 1:{ - rs = 4096; - break; - } - case 2:{ - rs = 8192; - break; - } - case 3:{ - rs = 0; - break; - } - } - switch (sdccr_cs) { - case 0:{ - cs = 256; - break; - } - case 1:{ - cs = 512; - break; - } - case 2:{ - cs = 1024; - break; - } - case 3:{ - cs = 2048; - break; - } - } - switch (sdccr_mw) { - case 0:{ - mw = 8; - break; - } /* 8 bytes = 64 bits */ - case 1:{ - mw = 4; - break; - } /* 4 bytes = 32 bits */ - } - } - - /* bytes per chip MB per chip num chips */ - msize = (((rs * cs * mw) / (1024 * 1024)) * bs); - - return (msize); -} - - -unsigned int __init tx4927_get_mem_size(void) -{ - unsigned int c0; - unsigned int c1; - unsigned int c2; - unsigned int c3; - unsigned int total; - - /* MVMCP -- need #defs for these registers */ - c0 = tx4927_process_sdccr(0xff1f8000); - c1 = tx4927_process_sdccr(0xff1f8008); - c2 = tx4927_process_sdccr(0xff1f8010); - c3 = tx4927_process_sdccr(0xff1f8018); - total = c0 + c1 + c2 + c3; - - return (total); -} diff --git a/arch/mips/tx4927/toshiba_rbtx4927/Makefile b/arch/mips/tx4927/toshiba_rbtx4927/Makefile deleted file mode 100644 index 13f96725d772..000000000000 --- a/arch/mips/tx4927/toshiba_rbtx4927/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -obj-y += toshiba_rbtx4927_prom.o -obj-y += toshiba_rbtx4927_setup.o -obj-y += toshiba_rbtx4927_irq.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c deleted file mode 100644 index c18901a75cc4..000000000000 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * linux/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c - * - * Toshiba RBTX4927 specific interrupt handlers - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -/* -IRQ Device -00 RBTX4927-ISA/00 -01 RBTX4927-ISA/01 PS2/Keyboard -02 RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15) -03 RBTX4927-ISA/03 -04 RBTX4927-ISA/04 -05 RBTX4927-ISA/05 -06 RBTX4927-ISA/06 -07 RBTX4927-ISA/07 -08 RBTX4927-ISA/08 -09 RBTX4927-ISA/09 -10 RBTX4927-ISA/10 -11 RBTX4927-ISA/11 -12 RBTX4927-ISA/12 PS2/Mouse (not supported at this time) -13 RBTX4927-ISA/13 -14 RBTX4927-ISA/14 IDE -15 RBTX4927-ISA/15 - -16 TX4927-CP0/00 Software 0 -17 TX4927-CP0/01 Software 1 -18 TX4927-CP0/02 Cascade TX4927-CP0 -19 TX4927-CP0/03 Multiplexed -- do not use -20 TX4927-CP0/04 Multiplexed -- do not use -21 TX4927-CP0/05 Multiplexed -- do not use -22 TX4927-CP0/06 Multiplexed -- do not use -23 TX4927-CP0/07 CPU TIMER - -24 TX4927-PIC/00 -25 TX4927-PIC/01 -26 TX4927-PIC/02 -27 TX4927-PIC/03 Cascade RBTX4927-IOC -28 TX4927-PIC/04 -29 TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet -30 TX4927-PIC/06 -31 TX4927-PIC/07 -32 TX4927-PIC/08 TX4927 SerialIO Channel 0 -33 TX4927-PIC/09 TX4927 SerialIO Channel 1 -34 TX4927-PIC/10 -35 TX4927-PIC/11 -36 TX4927-PIC/12 -37 TX4927-PIC/13 -38 TX4927-PIC/14 -39 TX4927-PIC/15 -40 TX4927-PIC/16 TX4927 PCI PCI-C -41 TX4927-PIC/17 -42 TX4927-PIC/18 -43 TX4927-PIC/19 -44 TX4927-PIC/20 -45 TX4927-PIC/21 -46 TX4927-PIC/22 TX4927 PCI PCI-ERR -47 TX4927-PIC/23 TX4927 PCI PCI-PMA (not used) -48 TX4927-PIC/24 -49 TX4927-PIC/25 -50 TX4927-PIC/26 -51 TX4927-PIC/27 -52 TX4927-PIC/28 -53 TX4927-PIC/29 -54 TX4927-PIC/30 -55 TX4927-PIC/31 - -56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed) [RTL-8139=PJ4] -57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed) [RTL-8139=PJ5] -58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported] -59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4) [RTL-8139=PJ6] -60 RBTX4927-IOC/04 -61 RBTX4927-IOC/05 -62 RBTX4927-IOC/06 -63 RBTX4927-IOC/07 - -NOTES: -SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58 -SouthBridge/ISA/pin=0 no pci irq used by this device -SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14 -SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59 -SouthBridge/PMC/pin=0 no pci irq used by this device -SuperIO/PS2/Keyboard, using INTR via ISA IRQ1 -SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported) -JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6 -*/ - -#include -#include -#include -#include -#ifdef CONFIG_TOSHIBA_FPCIB0 -#include -#endif -#include - -#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG 0 -#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_END 7 - -#define TOSHIBA_RBTX4927_IRQ_IOC_BEG ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG) /* 56 */ -#define TOSHIBA_RBTX4927_IRQ_IOC_END ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_END) /* 63 */ - -#define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC -#define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2) - -extern int tx4927_using_backplane; - -static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq); -static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq); - -#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC" -static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { - .name = TOSHIBA_RBTX4927_IOC_NAME, - .ack = toshiba_rbtx4927_irq_ioc_disable, - .mask = toshiba_rbtx4927_irq_ioc_disable, - .mask_ack = toshiba_rbtx4927_irq_ioc_disable, - .unmask = toshiba_rbtx4927_irq_ioc_enable, -}; -#define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL -#define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL - -int toshiba_rbtx4927_irq_nested(int sw_irq) -{ - u8 level3; - - level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f; - if (level3) { - sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + fls(level3) - 1; -#ifdef CONFIG_TOSHIBA_FPCIB0 - if (sw_irq == TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC && - tx4927_using_backplane) { - int irq = i8259_irq(); - if (irq >= 0) - sw_irq = irq; - } -#endif - } - return (sw_irq); -} - -static struct irqaction toshiba_rbtx4927_irq_ioc_action = { - .handler = no_action, - .flags = IRQF_SHARED, - .mask = CPU_MASK_NONE, - .name = TOSHIBA_RBTX4927_IOC_NAME -}; - -static void __init toshiba_rbtx4927_irq_ioc_init(void) -{ - int i; - - for (i = TOSHIBA_RBTX4927_IRQ_IOC_BEG; - i <= TOSHIBA_RBTX4927_IRQ_IOC_END; i++) - set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type, - handle_level_irq); - - setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC, - &toshiba_rbtx4927_irq_ioc_action); -} - -static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq) -{ - unsigned char v; - - v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); - v |= (1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); - writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); -} - -static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq) -{ - unsigned char v; - - v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); - v &= ~(1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); - writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); - mmiowb(); -} - -void __init arch_init_irq(void) -{ - extern void tx4927_irq_init(void); - - tx4927_irq_init(); - toshiba_rbtx4927_irq_ioc_init(); -#ifdef CONFIG_TOSHIBA_FPCIB0 - if (tx4927_using_backplane) - init_i8259_irqs(); -#endif - /* Onboard 10M Ether: High Active */ - set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH); -} diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c deleted file mode 100644 index fdbad4bc6021..000000000000 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * rbtx4927 specific prom routines - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include -#include - -void __init prom_init_cmdline(void) -{ - int argc = (int) fw_arg0; - char **argv = (char **) fw_arg1; - int i; /* Always ignore the "-c" at argv[0] */ - - /* ignore all built-in args if any f/w args given */ - if (argc > 1) { - *arcs_cmdline = '\0'; - } - - for (i = 1; i < argc; i++) { - if (i != 1) { - strcat(arcs_cmdline, " "); - } - strcat(arcs_cmdline, argv[i]); - } -} - -void __init prom_init(void) -{ - extern int tx4927_get_mem_size(void); - extern char* toshiba_name; - int msize; - - prom_init_cmdline(); - - if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) { - mips_machtype = MACH_TOSHIBA_RBTX4927; - toshiba_name = "TX4927"; - } else { - mips_machtype = MACH_TOSHIBA_RBTX4937; - toshiba_name = "TX4937"; - } - - msize = tx4927_get_mem_size(); - add_memory_region(0, msize << 20, BOOT_MEM_RAM); -} - -void __init prom_free_prom_memory(void) -{ -} - -const char *get_system_type(void) -{ - return "Toshiba RBTX4927/RBTX4937"; -} - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c deleted file mode 100644 index 185f303c0e2a..000000000000 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +++ /dev/null @@ -1,703 +0,0 @@ -/* - * Toshiba rbtx4927 specific setup - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2000 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * Copyright 2002 MontaVista Software Inc. - * Author: Michael Pruznick, michael_pruznick@mvista.com - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_TOSHIBA_FPCIB0 -#include -#endif -#include -#ifdef CONFIG_SERIAL_TXX9 -#include -#endif - -/* These functions are used for rebooting or halting the machine*/ -extern void toshiba_rbtx4927_restart(char *command); -extern void toshiba_rbtx4927_halt(void); -extern void toshiba_rbtx4927_power_off(void); - -int tx4927_using_backplane = 0; - -extern void toshiba_rbtx4927_irq_setup(void); - -char *prom_getcmdline(void); - -#ifdef CONFIG_PCI -#undef TX4927_SUPPORT_COMMAND_IO -#undef TX4927_SUPPORT_PCI_66 -int tx4927_cpu_clock = 100000000; /* 100MHz */ -unsigned long mips_pci_io_base; -unsigned long mips_pci_io_size; -unsigned long mips_pci_mem_base; -unsigned long mips_pci_mem_size; -/* for legacy I/O, PCI I/O PCI Bus address must be 0 */ -unsigned long mips_pci_io_pciaddr = 0; -unsigned long mips_memory_upper; -static int tx4927_ccfg_toeon = 1; -static int tx4927_pcic_trdyto = 0; /* default: disabled */ -unsigned long tx4927_ce_base[8]; -int tx4927_pci66 = 0; /* 0:auto */ -#endif - -char *toshiba_name = ""; - -#ifdef CONFIG_PCI -extern struct pci_controller tx4927_controller; - -static struct pci_dev *fake_pci_dev(struct pci_controller *hose, - int top_bus, int busnr, int devfn) -{ - static struct pci_dev dev; - static struct pci_bus bus; - - dev.sysdata = (void *)hose; - dev.devfn = devfn; - bus.number = busnr; - bus.ops = hose->pci_ops; - bus.parent = NULL; - dev.bus = &bus; - - return &dev; -} - -#define EARLY_PCI_OP(rw, size, type) \ -static int early_##rw##_config_##size(struct pci_controller *hose, \ - int top_bus, int bus, int devfn, int offset, type value) \ -{ \ - return pci_##rw##_config_##size( \ - fake_pci_dev(hose, top_bus, bus, devfn), \ - offset, value); \ -} - -EARLY_PCI_OP(read, byte, u8 *) -EARLY_PCI_OP(read, dword, u32 *) -EARLY_PCI_OP(write, byte, u8) -EARLY_PCI_OP(write, dword, u32) - -static int __init tx4927_pcibios_init(void) -{ - unsigned int id; - u32 pci_devfn; - int devfn_start = 0; - int devfn_stop = 0xff; - int busno = 0; /* One bus on the Toshiba */ - struct pci_controller *hose = &tx4927_controller; - - for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) { - early_read_config_dword(hose, busno, busno, pci_devfn, - PCI_VENDOR_ID, &id); - - if (id == 0xffffffff) { - continue; - } - - if (id == 0x94601055) { - u8 v08_64; - u32 v32_b0; - u8 v08_e1; - - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x64, &v08_64); - early_read_config_dword(hose, busno, busno, - pci_devfn, 0xb0, &v32_b0); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0xe1, &v08_e1); - - /* serial irq control */ - v08_64 = 0xd0; - - /* serial irq pin */ - v32_b0 |= 0x00010000; - - /* ide irq on isa14 */ - v08_e1 &= 0xf0; - v08_e1 |= 0x0d; - - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x64, v08_64); - early_write_config_dword(hose, busno, busno, - pci_devfn, 0xb0, v32_b0); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0xe1, v08_e1); - } - - if (id == 0x91301055) { - u8 v08_04; - u8 v08_09; - u8 v08_41; - u8 v08_43; - u8 v08_5c; - - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x04, &v08_04); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x09, &v08_09); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x41, &v08_41); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x43, &v08_43); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x5c, &v08_5c); - - /* enable ide master/io */ - v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO); - - /* enable ide native mode */ - v08_09 |= 0x05; - - /* enable primary ide */ - v08_41 |= 0x80; - - /* enable secondary ide */ - v08_43 |= 0x80; - - /* - * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! - * - * This line of code is intended to provide the user with a work - * around solution to the anomalies cited in SMSC's anomaly sheet - * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"". - * - * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! - */ - v08_5c |= 0x01; - - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x5c, v08_5c); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x04, v08_04); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x09, v08_09); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x41, v08_41); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x43, v08_43); - } - - } - - register_pci_controller(&tx4927_controller); - return 0; -} - -arch_initcall(tx4927_pcibios_init); - -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; - -void __init tx4927_pci_setup(void) -{ - static int called = 0; - extern unsigned int tx4927_get_mem_size(void); - - mips_memory_upper = tx4927_get_mem_size() << 20; - mips_memory_upper += KSEG0; - mips_pci_io_base = TX4927_PCIIO; - mips_pci_io_size = TX4927_PCIIO_SIZE; - mips_pci_mem_base = TX4927_PCIMEM; - mips_pci_mem_size = TX4927_PCIMEM_SIZE; - - if (!called) { - printk - ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", - toshiba_name, - (unsigned short) (tx4927_pcicptr->pciid >> 16), - (unsigned short) (tx4927_pcicptr->pciid & 0xffff), - (unsigned short) (tx4927_pcicptr->pciccrev & 0xff), - (!(tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIXARB)) ? "External" : - "Internal"); - called = 1; - } - printk("%s PCIC --%s PCICLK:", toshiba_name, - (tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : ""); - if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) { - int pciclk = 0; - if (mips_machtype == MACH_TOSHIBA_RBTX4937) - switch ((unsigned long) tx4927_ccfgptr-> - ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { - case TX4937_CCFG_PCIDIVMODE_4: - pciclk = tx4927_cpu_clock / 4; - break; - case TX4937_CCFG_PCIDIVMODE_4_5: - pciclk = tx4927_cpu_clock * 2 / 9; - break; - case TX4937_CCFG_PCIDIVMODE_5: - pciclk = tx4927_cpu_clock / 5; - break; - case TX4937_CCFG_PCIDIVMODE_5_5: - pciclk = tx4927_cpu_clock * 2 / 11; - break; - case TX4937_CCFG_PCIDIVMODE_8: - pciclk = tx4927_cpu_clock / 8; - break; - case TX4937_CCFG_PCIDIVMODE_9: - pciclk = tx4927_cpu_clock / 9; - break; - case TX4937_CCFG_PCIDIVMODE_10: - pciclk = tx4927_cpu_clock / 10; - break; - case TX4937_CCFG_PCIDIVMODE_11: - pciclk = tx4927_cpu_clock / 11; - break; - } - - else - switch ((unsigned long) tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { - case TX4927_CCFG_PCIDIVMODE_2_5: - pciclk = tx4927_cpu_clock * 2 / 5; - break; - case TX4927_CCFG_PCIDIVMODE_3: - pciclk = tx4927_cpu_clock / 3; - break; - case TX4927_CCFG_PCIDIVMODE_5: - pciclk = tx4927_cpu_clock / 5; - break; - case TX4927_CCFG_PCIDIVMODE_6: - pciclk = tx4927_cpu_clock / 6; - break; - } - - printk("Internal(%dMHz)", pciclk / 1000000); - } else - printk("External"); - printk("\n"); - - /* GB->PCI mappings */ - tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4; - tx4927_pcicptr->g2piogbase = mips_pci_io_base | -#ifdef __BIG_ENDIAN - TX4927_PCIC_G2PIOGBASE_ECHG -#else - TX4927_PCIC_G2PIOGBASE_BSDIS -#endif - ; - - tx4927_pcicptr->g2piopbase = 0; - - tx4927_pcicptr->g2pmmask[0] = (mips_pci_mem_size - 1) >> 4; - tx4927_pcicptr->g2pmgbase[0] = mips_pci_mem_base | -#ifdef __BIG_ENDIAN - TX4927_PCIC_G2PMnGBASE_ECHG -#else - TX4927_PCIC_G2PMnGBASE_BSDIS -#endif - ; - tx4927_pcicptr->g2pmpbase[0] = mips_pci_mem_base; - - tx4927_pcicptr->g2pmmask[1] = 0; - tx4927_pcicptr->g2pmgbase[1] = 0; - tx4927_pcicptr->g2pmpbase[1] = 0; - tx4927_pcicptr->g2pmmask[2] = 0; - tx4927_pcicptr->g2pmgbase[2] = 0; - tx4927_pcicptr->g2pmpbase[2] = 0; - - - /* PCI->GB mappings (I/O 256B) */ - tx4927_pcicptr->p2giopbase = 0; /* 256B */ - - /* PCI->GB mappings (MEM 512MB) M0 gets all of memory */ - tx4927_pcicptr->p2gm0plbase = 0; - tx4927_pcicptr->p2gm0pubase = 0; - tx4927_pcicptr->p2gmgbase[0] = 0 | TX4927_PCIC_P2GMnGBASE_TMEMEN | -#ifdef __BIG_ENDIAN - TX4927_PCIC_P2GMnGBASE_TECHG -#else - TX4927_PCIC_P2GMnGBASE_TBSDIS -#endif - ; - - /* PCI->GB mappings (MEM 16MB) -not used */ - tx4927_pcicptr->p2gm1plbase = 0xffffffff; - tx4927_pcicptr->p2gm1pubase = 0xffffffff; - tx4927_pcicptr->p2gmgbase[1] = 0; - - /* PCI->GB mappings (MEM 1MB) -not used */ - tx4927_pcicptr->p2gm2pbase = 0xffffffff; - tx4927_pcicptr->p2gmgbase[2] = 0; - - - /* Enable Initiator Memory 0 Space, I/O Space, Config */ - tx4927_pcicptr->pciccfg &= TX4927_PCIC_PCICCFG_LBWC_MASK; - tx4927_pcicptr->pciccfg |= - TX4927_PCIC_PCICCFG_IMSE0 | TX4927_PCIC_PCICCFG_IISE | - TX4927_PCIC_PCICCFG_ICAE | TX4927_PCIC_PCICCFG_ATR; - - - /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ - tx4927_pcicptr->pcicfg1 = 0; - - if (tx4927_pcic_trdyto >= 0) { - tx4927_pcicptr->g2ptocnt &= ~0xff; - tx4927_pcicptr->g2ptocnt |= (tx4927_pcic_trdyto & 0xff); - } - - /* Clear All Local Bus Status */ - tx4927_pcicptr->pcicstatus = TX4927_PCIC_PCICSTATUS_ALL; - /* Enable All Local Bus Interrupts */ - tx4927_pcicptr->pcicmask = TX4927_PCIC_PCICSTATUS_ALL; - /* Clear All Initiator Status */ - tx4927_pcicptr->g2pstatus = TX4927_PCIC_G2PSTATUS_ALL; - /* Enable All Initiator Interrupts */ - tx4927_pcicptr->g2pmask = TX4927_PCIC_G2PSTATUS_ALL; - /* Clear All PCI Status Error */ - tx4927_pcicptr->pcistatus = - (tx4927_pcicptr->pcistatus & 0x0000ffff) | - (TX4927_PCIC_PCISTATUS_ALL << 16); - /* Enable All PCI Status Error Interrupts */ - tx4927_pcicptr->pcimask = TX4927_PCIC_PCISTATUS_ALL; - - /* PCIC Int => IRC IRQ16 */ - tx4927_pcicptr->pcicfg2 = - (tx4927_pcicptr->pcicfg2 & 0xffffff00) | TX4927_IR_PCIC; - - if (!(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCIXARB)) { - /* XXX */ - } else { - /* Reset Bus Arbiter */ - tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_RPBA; - /* Enable Bus Arbiter */ - tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_PBAEN; - } - - tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; -} -#endif /* CONFIG_PCI */ - -static void __noreturn wait_forever(void) -{ - while (1) - if (cpu_wait) - (*cpu_wait)(); -} - -void toshiba_rbtx4927_restart(char *command) -{ - printk(KERN_NOTICE "System Rebooting...\n"); - - /* enable the s/w reset register */ - writeb(RBTX4927_SW_RESET_ENABLE_SET, RBTX4927_SW_RESET_ENABLE); - - /* wait for enable to be seen */ - while ((readb(RBTX4927_SW_RESET_ENABLE) & - RBTX4927_SW_RESET_ENABLE_SET) == 0x00); - - /* do a s/w reset */ - writeb(RBTX4927_SW_RESET_DO_SET, RBTX4927_SW_RESET_DO); - - /* do something passive while waiting for reset */ - local_irq_disable(); - wait_forever(); - /* no return */ -} - -void toshiba_rbtx4927_halt(void) -{ - printk(KERN_NOTICE "System Halted\n"); - local_irq_disable(); - wait_forever(); - /* no return */ -} - -void toshiba_rbtx4927_power_off(void) -{ - toshiba_rbtx4927_halt(); - /* no return */ -} - -void __init plat_mem_setup(void) -{ - int i; - u32 cp0_config; - char *argptr; - - printk("CPU is %s\n", toshiba_name); - - /* f/w leaves this on at startup */ - clear_c0_status(ST0_ERL); - - /* enable caches -- HCP5 does this, pmon does not */ - cp0_config = read_c0_config(); - cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); - write_c0_config(cp0_config); - - set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET); - - ioport_resource.end = 0xffffffff; - iomem_resource.end = 0xffffffff; - - _machine_restart = toshiba_rbtx4927_restart; - _machine_halt = toshiba_rbtx4927_halt; - pm_power_off = toshiba_rbtx4927_power_off; - - for (i = 0; i < TX4927_NR_TMR; i++) - txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL); - -#ifdef CONFIG_PCI - - /* PCIC */ - /* - * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. - * - * For TX4927: - * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1). - * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5) - * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3) - * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) - * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) - * i.e. S9[3]: ON (83MHz), OFF (100MHz) - * - * For TX4937: - * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) - * PCIDIVMODE[10] is 0. - * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8) - * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4) - * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9) - * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5) - * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) - * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) - * - */ - if (mips_machtype == MACH_TOSHIBA_RBTX4937) - switch ((unsigned long)tx4927_ccfgptr-> - ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { - case TX4937_CCFG_PCIDIVMODE_8: - case TX4937_CCFG_PCIDIVMODE_4: - tx4927_cpu_clock = 266666666; /* 266MHz */ - break; - case TX4937_CCFG_PCIDIVMODE_9: - case TX4937_CCFG_PCIDIVMODE_4_5: - tx4927_cpu_clock = 300000000; /* 300MHz */ - break; - default: - tx4927_cpu_clock = 333333333; /* 333MHz */ - } - else - switch ((unsigned long)tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { - case TX4927_CCFG_PCIDIVMODE_2_5: - case TX4927_CCFG_PCIDIVMODE_5: - tx4927_cpu_clock = 166666666; /* 166MHz */ - break; - default: - tx4927_cpu_clock = 200000000; /* 200MHz */ - } - - /* CCFG */ - /* do reset on watchdog */ - tx4927_ccfgptr->ccfg |= TX4927_CCFG_WR; - /* enable Timeout BusError */ - if (tx4927_ccfg_toeon) - tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE; - - tx4927_pci_setup(); - if (tx4927_using_backplane == 1) - printk("backplane board IS installed\n"); - else - printk("No Backplane \n"); - - /* this is on ISA bus behind PCI bus, so need PCI up first */ -#ifdef CONFIG_TOSHIBA_FPCIB0 - if (tx4927_using_backplane) { - smsc_fdc37m81x_init(0x3f0); - smsc_fdc37m81x_config_beg(); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, - SMSC_FDC37M81X_KBD); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, - 1); - smsc_fdc37m81x_config_end(); - } -#endif -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_SERIAL_TXX9 - { - extern int early_serial_txx9_setup(struct uart_port *port); - struct uart_port req; - for(i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (char *)(0xff1ff300 + i * 0x100); - req.mapbase = 0xff1ff300 + i * 0x100; - req.irq = TX4927_IRQ_PIC_BEG + 8 + i; - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = 50000000; - early_serial_txx9_setup(&req); - } - } -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (strstr(argptr, "console=") == NULL) { - strcat(argptr, " console=ttyS0,38400"); - } -#endif -#endif - -#ifdef CONFIG_ROOT_NFS - argptr = prom_getcmdline(); - if (strstr(argptr, "root=") == NULL) { - strcat(argptr, " root=/dev/nfs rw"); - } -#endif - -#ifdef CONFIG_IP_PNP - argptr = prom_getcmdline(); - if (strstr(argptr, "ip=") == NULL) { - strcat(argptr, " ip=any"); - } -#endif -} - -void __init plat_time_init(void) -{ - mips_hpt_frequency = tx4927_cpu_clock / 2; - if (tx4927_ccfgptr->ccfg & TX4927_CCFG_TINTDIS) - txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL, - TXX9_IRQ_BASE + 17, - 50000000); -} - -static int __init toshiba_rbtx4927_rtc_init(void) -{ - static struct resource __initdata res = { - .start = 0x1c010000, - .end = 0x1c010000 + 0x800 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("rtc-ds1742", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} -device_initcall(toshiba_rbtx4927_rtc_init); - -static int __init rbtx4927_ne_init(void) -{ - static struct resource __initdata res[] = { - { - .start = RBTX4927_RTL_8019_BASE, - .end = RBTX4927_RTL_8019_BASE + 0x20 - 1, - .flags = IORESOURCE_IO, - }, { - .start = RBTX4927_RTL_8019_IRQ, - .flags = IORESOURCE_IRQ, - } - }; - struct platform_device *dev = - platform_device_register_simple("ne", -1, - res, ARRAY_SIZE(res)); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} -device_initcall(rbtx4927_ne_init); - -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init rbtx4927_wdt_init(void) -{ - return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); -} -device_initcall(rbtx4927_wdt_init); - -/* Minimum CLK support */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "imbus_clk")) - return (struct clk *)50000000; - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return (unsigned long)clk; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/tx4938/Kconfig b/arch/mips/tx4938/Kconfig deleted file mode 100644 index d90e9cd85138..000000000000 --- a/arch/mips/tx4938/Kconfig +++ /dev/null @@ -1,24 +0,0 @@ -if TOSHIBA_RBTX4938 - -comment "Multiplex Pin Select" -choice - prompt "PIO[58:61]" - default TOSHIBA_RBTX4938_MPLEX_PIO58_61 - -config TOSHIBA_RBTX4938_MPLEX_PIO58_61 - bool "PIO" -config TOSHIBA_RBTX4938_MPLEX_NAND - bool "NAND" -config TOSHIBA_RBTX4938_MPLEX_ATA - bool "ATA" - -endchoice - -config TX4938_NAND_BOOT - depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND - bool "NAND Boot Support (EXPERIMENTAL)" - help - This is only for Toshiba RBTX4938 reference board, which has NAND IPL. - Select this option if you need to use NAND boot. - -endif diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile deleted file mode 100644 index 56aa1ed1ee0c..000000000000 --- a/arch/mips/tx4938/common/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for common code for Toshiba TX4927 based systems -# - -obj-y += prom.o irq.o -obj-$(CONFIG_KGDB) += dbgio.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4938/common/dbgio.c b/arch/mips/tx4938/common/dbgio.c deleted file mode 100644 index 33b9c672a322..000000000000 --- a/arch/mips/tx4938/common/dbgio.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/dbgio.c - * - * kgdb interface for gdb - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Support for TX4938 in 2.6 - Hiroshi DOYU - */ - -#include - -extern u8 txx9_sio_kdbg_rd(void); -extern int txx9_sio_kdbg_wr( u8 ch ); - -u8 getDebugChar(void) -{ - return (txx9_sio_kdbg_rd()); -} - -int putDebugChar(u8 byte) -{ - return (txx9_sio_kdbg_wr(byte)); -} - diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c deleted file mode 100644 index c059b899d120..000000000000 --- a/arch/mips/tx4938/common/irq.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/irq.c - * - * Common tx4938 irq handler - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include -#include - -void __init -tx4938_irq_init(void) -{ - mips_cpu_irq_init(); - txx9_irq_init(TX4938_IRC_REG); - set_irq_chained_handler(TX4938_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); -} - -int toshiba_rbtx4938_irq_nested(int irq); - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status(); - - if (pending & STATUSF_IP7) - do_IRQ(TX4938_IRQ_CPU_TIMER); - else if (pending & STATUSF_IP2) { - int irq = txx9_irq(); - if (irq == TX4938_IRQ_PIC_BEG + TX4938_IR_INT(0)) - irq = toshiba_rbtx4938_irq_nested(irq); - if (irq >= 0) - do_IRQ(irq); - else - spurious_interrupt(); - } else if (pending & STATUSF_IP1) - do_IRQ(TX4938_IRQ_USER1); - else if (pending & STATUSF_IP0) - do_IRQ(TX4938_IRQ_USER0); -} diff --git a/arch/mips/tx4938/common/prom.c b/arch/mips/tx4938/common/prom.c deleted file mode 100644 index 20baeaeba4cd..000000000000 --- a/arch/mips/tx4938/common/prom.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/prom.c - * - * common tx4938 memory interface - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ - -#include -#include -#include - -static unsigned int __init -tx4938_process_sdccr(u64 * addr) -{ - u64 val; - unsigned int sdccr_ce; - unsigned int sdccr_rs; - unsigned int sdccr_cs; - unsigned int sdccr_mw; - unsigned int rs = 0; - unsigned int cs = 0; - unsigned int mw = 0; - unsigned int bc = 4; - unsigned int msize = 0; - - val = ____raw_readq((void __iomem *)addr); - - /* MVMCP -- need #defs for these bits masks */ - sdccr_ce = ((val & (1 << 10)) >> 10); - sdccr_rs = ((val & (3 << 5)) >> 5); - sdccr_cs = ((val & (7 << 2)) >> 2); - sdccr_mw = ((val & (1 << 0)) >> 0); - - if (sdccr_ce) { - switch (sdccr_rs) { - case 0:{ - rs = 2048; - break; - } - case 1:{ - rs = 4096; - break; - } - case 2:{ - rs = 8192; - break; - } - default:{ - rs = 0; - break; - } - } - switch (sdccr_cs) { - case 0:{ - cs = 256; - break; - } - case 1:{ - cs = 512; - break; - } - case 2:{ - cs = 1024; - break; - } - case 3:{ - cs = 2048; - break; - } - case 4:{ - cs = 4096; - break; - } - default:{ - cs = 0; - break; - } - } - switch (sdccr_mw) { - case 0:{ - mw = 8; - break; - } /* 8 bytes = 64 bits */ - case 1:{ - mw = 4; - break; - } /* 4 bytes = 32 bits */ - } - } - - /* bytes per chip MB per chip bank count */ - msize = (((rs * cs * mw) / (1024 * 1024)) * (bc)); - - /* MVMCP -- bc hard coded to 4 from table 9.3.1 */ - /* boad supports bc=2 but no way to detect */ - - return (msize); -} - -unsigned int __init -tx4938_get_mem_size(void) -{ - unsigned int c0; - unsigned int c1; - unsigned int c2; - unsigned int c3; - unsigned int total; - - /* MVMCP -- need #defs for these registers */ - c0 = tx4938_process_sdccr((u64 *) 0xff1f8000); - c1 = tx4938_process_sdccr((u64 *) 0xff1f8008); - c2 = tx4938_process_sdccr((u64 *) 0xff1f8010); - c3 = tx4938_process_sdccr((u64 *) 0xff1f8018); - total = c0 + c1 + c2 + c3; - - return (total); -} diff --git a/arch/mips/tx4938/toshiba_rbtx4938/Makefile b/arch/mips/tx4938/toshiba_rbtx4938/Makefile deleted file mode 100644 index 2316dd7dd1bd..000000000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for common code for Toshiba TX4927 based systems -# - -obj-y += prom.o setup.o irq.o spi_eeprom.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c deleted file mode 100644 index 4d6a8dc46c76..000000000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * linux/arch/mips/tx4938/toshiba_rbtx4938/irq.c - * - * Toshiba RBTX4938 specific interrupt handlers - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ - -/* -IRQ Device - -16 TX4938-CP0/00 Software 0 -17 TX4938-CP0/01 Software 1 -18 TX4938-CP0/02 Cascade TX4938-CP0 -19 TX4938-CP0/03 Multiplexed -- do not use -20 TX4938-CP0/04 Multiplexed -- do not use -21 TX4938-CP0/05 Multiplexed -- do not use -22 TX4938-CP0/06 Multiplexed -- do not use -23 TX4938-CP0/07 CPU TIMER - -24 TX4938-PIC/00 -25 TX4938-PIC/01 -26 TX4938-PIC/02 Cascade RBTX4938-IOC -27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet -28 TX4938-PIC/04 -29 TX4938-PIC/05 TX4938 ETH1 -30 TX4938-PIC/06 TX4938 ETH0 -31 TX4938-PIC/07 -32 TX4938-PIC/08 TX4938 SIO 0 -33 TX4938-PIC/09 TX4938 SIO 1 -34 TX4938-PIC/10 TX4938 DMA0 -35 TX4938-PIC/11 TX4938 DMA1 -36 TX4938-PIC/12 TX4938 DMA2 -37 TX4938-PIC/13 TX4938 DMA3 -38 TX4938-PIC/14 -39 TX4938-PIC/15 -40 TX4938-PIC/16 TX4938 PCIC -41 TX4938-PIC/17 TX4938 TMR0 -42 TX4938-PIC/18 TX4938 TMR1 -43 TX4938-PIC/19 TX4938 TMR2 -44 TX4938-PIC/20 -45 TX4938-PIC/21 -46 TX4938-PIC/22 TX4938 PCIERR -47 TX4938-PIC/23 -48 TX4938-PIC/24 -49 TX4938-PIC/25 -50 TX4938-PIC/26 -51 TX4938-PIC/27 -52 TX4938-PIC/28 -53 TX4938-PIC/29 -54 TX4938-PIC/30 -55 TX4938-PIC/31 TX4938 SPI - -56 RBTX4938-IOC/00 PCI-D -57 RBTX4938-IOC/01 PCI-C -58 RBTX4938-IOC/02 PCI-B -59 RBTX4938-IOC/03 PCI-A -60 RBTX4938-IOC/04 RTC -61 RBTX4938-IOC/05 ATA -62 RBTX4938-IOC/06 MODEM -63 RBTX4938-IOC/07 SWINT -*/ -#include -#include -#include - -static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq); -static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq); - -#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC" -static struct irq_chip toshiba_rbtx4938_irq_ioc_type = { - .name = TOSHIBA_RBTX4938_IOC_NAME, - .ack = toshiba_rbtx4938_irq_ioc_disable, - .mask = toshiba_rbtx4938_irq_ioc_disable, - .mask_ack = toshiba_rbtx4938_irq_ioc_disable, - .unmask = toshiba_rbtx4938_irq_ioc_enable, -}; - -int -toshiba_rbtx4938_irq_nested(int sw_irq) -{ - u8 level3; - - level3 = readb(rbtx4938_imstat_addr); - if (level3) - /* must use fls so onboard ATA has priority */ - sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1; - - return sw_irq; -} - -static struct irqaction toshiba_rbtx4938_irq_ioc_action = { - .handler = no_action, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = TOSHIBA_RBTX4938_IOC_NAME, -}; - -/**********************************************************************************/ -/* Functions for ioc */ -/**********************************************************************************/ -static void __init -toshiba_rbtx4938_irq_ioc_init(void) -{ - int i; - - for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG; - i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++) - set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type, - handle_level_irq); - - setup_irq(RBTX4938_IRQ_IOCINT, - &toshiba_rbtx4938_irq_ioc_action); -} - -static void -toshiba_rbtx4938_irq_ioc_enable(unsigned int irq) -{ - unsigned char v; - - v = readb(rbtx4938_imask_addr); - v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); - writeb(v, rbtx4938_imask_addr); - mmiowb(); -} - -static void -toshiba_rbtx4938_irq_ioc_disable(unsigned int irq) -{ - unsigned char v; - - v = readb(rbtx4938_imask_addr); - v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); - writeb(v, rbtx4938_imask_addr); - mmiowb(); -} - -void __init arch_init_irq(void) -{ - extern void tx4938_irq_init(void); - - /* Now, interrupt control disabled, */ - /* all IRC interrupts are masked, */ - /* all IRC interrupt mode are Low Active. */ - - /* mask all IOC interrupts */ - writeb(0, rbtx4938_imask_addr); - - /* clear SoftInt interrupts */ - writeb(0, rbtx4938_softint_addr); - tx4938_irq_init(); - toshiba_rbtx4938_irq_ioc_init(); - /* Onboard 10M Ether: High Active */ - set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH); -} diff --git a/arch/mips/tx4938/toshiba_rbtx4938/prom.c b/arch/mips/tx4938/toshiba_rbtx4938/prom.c deleted file mode 100644 index 1644bffa501a..000000000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/prom.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/arch/mips/tx4938/toshiba_rbtx4938/prom.c - * - * rbtx4938 specific prom routines - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ - -#include -#include -#include -#include - -#include -#include -#include - -void __init prom_init_cmdline(void) -{ - int argc = (int) fw_arg0; - char **argv = (char **) fw_arg1; - int i; - - /* ignore all built-in args if any f/w args given */ - if (argc > 1) { - *arcs_cmdline = '\0'; - } - - for (i = 1; i < argc; i++) { - if (i != 1) { - strcat(arcs_cmdline, " "); - } - strcat(arcs_cmdline, argv[i]); - } -} - -void __init prom_init(void) -{ - extern int tx4938_get_mem_size(void); - int msize; -#ifndef CONFIG_TX4938_NAND_BOOT - prom_init_cmdline(); -#endif - - msize = tx4938_get_mem_size(); - add_memory_region(0, msize << 20, BOOT_MEM_RAM); - - return; -} - -void __init prom_free_prom_memory(void) -{ -} - -void __init prom_fixup_mem_map(unsigned long start, unsigned long end) -{ - return; -} - -const char *get_system_type(void) -{ - return "Toshiba RBTX4938"; -} - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c deleted file mode 100644 index 3a3659e8633a..000000000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c +++ /dev/null @@ -1,1124 +0,0 @@ -/* - * linux/arch/mips/tx4938/toshiba_rbtx4938/setup.c - * - * Setup pointers to hardware-dependent routines. - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_SERIAL_TXX9 -#include -#endif -#include -#include -#include - -extern char * __init prom_getcmdline(void); -static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr); - -/* These functions are used for rebooting or halting the machine*/ -extern void rbtx4938_machine_restart(char *command); -extern void rbtx4938_machine_halt(void); -extern void rbtx4938_machine_power_off(void); - -/* clocks */ -unsigned int txx9_master_clock; -unsigned int txx9_cpu_clock; -unsigned int txx9_gbus_clock; - -unsigned long rbtx4938_ce_base[8]; -unsigned long rbtx4938_ce_size[8]; -int txboard_pci66_mode; -static int tx4938_pcic_trdyto; /* default: disabled */ -static int tx4938_pcic_retryto; /* default: disabled */ -static int tx4938_ccfg_toeon = 1; - -struct tx4938_pcic_reg *pcicptrs[4] = { - tx4938_pcicptr /* default setting for TX4938 */ -}; - -static struct { - unsigned long base; - unsigned long size; -} phys_regions[16] __initdata; -static int num_phys_regions __initdata; - -#define PHYS_REGION_MINSIZE 0x10000 - -void rbtx4938_machine_halt(void) -{ - printk(KERN_NOTICE "System Halted\n"); - local_irq_disable(); - - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -void rbtx4938_machine_power_off(void) -{ - rbtx4938_machine_halt(); - /* no return */ -} - -void rbtx4938_machine_restart(char *command) -{ - local_irq_disable(); - - printk("Rebooting..."); - writeb(1, rbtx4938_softresetlock_addr); - writeb(1, rbtx4938_sfvol_addr); - writeb(1, rbtx4938_softreset_addr); - while(1) - ; -} - -void __init -txboard_add_phys_region(unsigned long base, unsigned long size) -{ - if (num_phys_regions >= ARRAY_SIZE(phys_regions)) { - printk("phys_region overflow\n"); - return; - } - phys_regions[num_phys_regions].base = base; - phys_regions[num_phys_regions].size = size; - num_phys_regions++; -} -unsigned long __init -txboard_find_free_phys_region(unsigned long begin, unsigned long end, - unsigned long size) -{ - unsigned long base; - int i; - - for (base = begin / size * size; base < end; base += size) { - for (i = 0; i < num_phys_regions; i++) { - if (phys_regions[i].size && - base <= phys_regions[i].base + (phys_regions[i].size - 1) && - base + (size - 1) >= phys_regions[i].base) - break; - } - if (i == num_phys_regions) - return base; - } - return 0; -} -unsigned long __init -txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end, - unsigned long *size) -{ - unsigned long sz, base; - for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) { - base = txboard_find_free_phys_region(begin, end, sz); - if (base) { - *size = sz; - return base; - } - } - return 0; -} -unsigned long __init -txboard_request_phys_region_range(unsigned long begin, unsigned long end, - unsigned long size) -{ - unsigned long base; - base = txboard_find_free_phys_region(begin, end, size); - if (base) - txboard_add_phys_region(base, size); - return base; -} -unsigned long __init -txboard_request_phys_region(unsigned long size) -{ - unsigned long base; - unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ - base = txboard_find_free_phys_region(begin, end, size); - if (base) - txboard_add_phys_region(base, size); - return base; -} -unsigned long __init -txboard_request_phys_region_shrink(unsigned long *size) -{ - unsigned long base; - unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ - base = txboard_find_free_phys_region_shrink(begin, end, size); - if (base) - txboard_add_phys_region(base, *size); - return base; -} - -#ifdef CONFIG_PCI -void __init -tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr, - struct pci_controller *channel, - unsigned long pci_io_base, - int extarb) -{ - int i; - - /* Disable All Initiator Space */ - pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)| - TX4938_PCIC_PCICCFG_G2PMEN(1)| - TX4938_PCIC_PCICCFG_G2PMEN(2)| - TX4938_PCIC_PCICCFG_G2PIOEN); - - /* GB->PCI mappings */ - pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4; - pcicptr->g2piogbase = pci_io_base | -#ifdef __BIG_ENDIAN - TX4938_PCIC_G2PIOGBASE_ECHG -#else - TX4938_PCIC_G2PIOGBASE_BSDIS -#endif - ; - pcicptr->g2piopbase = 0; - for (i = 0; i < 3; i++) { - pcicptr->g2pmmask[i] = 0; - pcicptr->g2pmgbase[i] = 0; - pcicptr->g2pmpbase[i] = 0; - } - if (channel->mem_resource->end) { - pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4; - pcicptr->g2pmgbase[0] = channel->mem_resource->start | -#ifdef __BIG_ENDIAN - TX4938_PCIC_G2PMnGBASE_ECHG -#else - TX4938_PCIC_G2PMnGBASE_BSDIS -#endif - ; - pcicptr->g2pmpbase[0] = channel->mem_resource->start; - } - /* PCI->GB mappings (I/O 256B) */ - pcicptr->p2giopbase = 0; /* 256B */ - pcicptr->p2giogbase = 0; - /* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */ - pcicptr->p2gm0plbase = 0; - pcicptr->p2gm0pubase = 0; - pcicptr->p2gmgbase[0] = 0 | - TX4938_PCIC_P2GMnGBASE_TMEMEN | -#ifdef __BIG_ENDIAN - TX4938_PCIC_P2GMnGBASE_TECHG -#else - TX4938_PCIC_P2GMnGBASE_TBSDIS -#endif - ; - /* PCI->GB mappings (MEM 16MB) */ - pcicptr->p2gm1plbase = 0xffffffff; - pcicptr->p2gm1pubase = 0xffffffff; - pcicptr->p2gmgbase[1] = 0; - /* PCI->GB mappings (MEM 1MB) */ - pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */ - pcicptr->p2gmgbase[2] = 0; - - pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK; - /* Enable Initiator Memory Space */ - if (channel->mem_resource->end) - pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0); - /* Enable Initiator I/O Space */ - if (channel->io_resource->end) - pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN; - /* Enable Initiator Config */ - pcicptr->pciccfg |= - TX4938_PCIC_PCICCFG_ICAEN | - TX4938_PCIC_PCICCFG_TCAR; - - /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ - pcicptr->pcicfg1 = 0; - - pcicptr->g2ptocnt &= ~0xffff; - - if (tx4938_pcic_trdyto >= 0) { - pcicptr->g2ptocnt &= ~0xff; - pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff); - } - - if (tx4938_pcic_retryto >= 0) { - pcicptr->g2ptocnt &= ~0xff00; - pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00); - } - - /* Clear All Local Bus Status */ - pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL; - /* Enable All Local Bus Interrupts */ - pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL; - /* Clear All Initiator Status */ - pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL; - /* Enable All Initiator Interrupts */ - pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL; - /* Clear All PCI Status Error */ - pcicptr->pcistatus = - (pcicptr->pcistatus & 0x0000ffff) | - (TX4938_PCIC_PCISTATUS_ALL << 16); - /* Enable All PCI Status Error Interrupts */ - pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL; - - if (!extarb) { - /* Reset Bus Arbiter */ - pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA; - pcicptr->pbabm = 0; - /* Enable Bus Arbiter */ - pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN; - } - - /* PCIC Int => IRC IRQ16 */ - pcicptr->pcicfg2 = - (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC; - - pcicptr->pcistatus = PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; -} - -int __init -tx4938_report_pciclk(void) -{ - unsigned long pcode = TX4938_REV_PCODE(); - int pciclk = 0; - printk("TX%lx PCIC --%s PCICLK:", - pcode, - (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : ""); - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { - - switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) { - case TX4938_CCFG_PCIDIVMODE_4: - pciclk = txx9_cpu_clock / 4; break; - case TX4938_CCFG_PCIDIVMODE_4_5: - pciclk = txx9_cpu_clock * 2 / 9; break; - case TX4938_CCFG_PCIDIVMODE_5: - pciclk = txx9_cpu_clock / 5; break; - case TX4938_CCFG_PCIDIVMODE_5_5: - pciclk = txx9_cpu_clock * 2 / 11; break; - case TX4938_CCFG_PCIDIVMODE_8: - pciclk = txx9_cpu_clock / 8; break; - case TX4938_CCFG_PCIDIVMODE_9: - pciclk = txx9_cpu_clock / 9; break; - case TX4938_CCFG_PCIDIVMODE_10: - pciclk = txx9_cpu_clock / 10; break; - case TX4938_CCFG_PCIDIVMODE_11: - pciclk = txx9_cpu_clock / 11; break; - } - printk("Internal(%dMHz)", pciclk / 1000000); - } else { - printk("External"); - pciclk = -1; - } - printk("\n"); - return pciclk; -} - -void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr) -{ - pcicptrs[ch] = pcicptr; -} - -struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch) -{ - return pcicptrs[ch]; -} - -static struct pci_dev *fake_pci_dev(struct pci_controller *hose, - int top_bus, int busnr, int devfn) -{ - static struct pci_dev dev; - static struct pci_bus bus; - - dev.sysdata = bus.sysdata = hose; - dev.devfn = devfn; - bus.number = busnr; - bus.ops = hose->pci_ops; - bus.parent = NULL; - dev.bus = &bus; - - return &dev; -} - -#define EARLY_PCI_OP(rw, size, type) \ -static int early_##rw##_config_##size(struct pci_controller *hose, \ - int top_bus, int bus, int devfn, int offset, type value) \ -{ \ - return pci_##rw##_config_##size( \ - fake_pci_dev(hose, top_bus, bus, devfn), \ - offset, value); \ -} - -EARLY_PCI_OP(read, word, u16 *) - -int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus) -{ - u32 pci_devfn; - unsigned short vid; - int devfn_start = 0; - int devfn_stop = 0xff; - int cap66 = -1; - u16 stat; - - printk("PCI: Checking 66MHz capabilities...\n"); - - for (pci_devfn=devfn_start; pci_devfn 0; -} - -int __init -tx4938_pciclk66_setup(void) -{ - int pciclk; - - /* Assert M66EN */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66; - /* Double PCICLK (if possible) */ - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { - unsigned int pcidivmode = - tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK; - switch (pcidivmode) { - case TX4938_CCFG_PCIDIVMODE_8: - case TX4938_CCFG_PCIDIVMODE_4: - pcidivmode = TX4938_CCFG_PCIDIVMODE_4; - pciclk = txx9_cpu_clock / 4; - break; - case TX4938_CCFG_PCIDIVMODE_9: - case TX4938_CCFG_PCIDIVMODE_4_5: - pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5; - pciclk = txx9_cpu_clock * 2 / 9; - break; - case TX4938_CCFG_PCIDIVMODE_10: - case TX4938_CCFG_PCIDIVMODE_5: - pcidivmode = TX4938_CCFG_PCIDIVMODE_5; - pciclk = txx9_cpu_clock / 5; - break; - case TX4938_CCFG_PCIDIVMODE_11: - case TX4938_CCFG_PCIDIVMODE_5_5: - default: - pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5; - pciclk = txx9_cpu_clock * 2 / 11; - break; - } - tx4938_ccfgptr->ccfg = - (tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK) - | pcidivmode; - printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n", - (unsigned long)tx4938_ccfgptr->ccfg); - } else { - pciclk = -1; - } - return pciclk; -} - -extern struct pci_controller tx4938_pci_controller[]; -static int __init tx4938_pcibios_init(void) -{ - unsigned long mem_base[2]; - unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0, TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */ - unsigned long io_base[2]; - unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0, TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */ - /* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */ - int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB); - - PCIBIOS_MIN_IO = 0x00001000UL; - - mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]); - io_base[0] = txboard_request_phys_region_shrink(&io_size[0]); - - printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", - (unsigned short)(tx4938_pcicptr->pciid >> 16), - (unsigned short)(tx4938_pcicptr->pciid & 0xffff), - (unsigned short)(tx4938_pcicptr->pciccrev & 0xff), - extarb ? "External" : "Internal"); - - /* setup PCI area */ - tx4938_pci_controller[0].io_resource->start = io_base[0]; - tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1; - tx4938_pci_controller[0].mem_resource->start = mem_base[0]; - tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1; - - set_tx4938_pcicptr(0, tx4938_pcicptr); - - register_pci_controller(&tx4938_pci_controller[0]); - - if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) { - printk("TX4938_CCFG_PCI66 already configured\n"); - txboard_pci66_mode = -1; /* already configured */ - } - - /* Reset PCI Bus */ - writeb(0, rbtx4938_pcireset_addr); - /* Reset PCIC */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; - if (txboard_pci66_mode > 0) - tx4938_pciclk66_setup(); - mdelay(10); - /* clear PCIC reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; - writeb(1, rbtx4938_pcireset_addr); - mmiowb(); - tx4938_report_pcic_status1(tx4938_pcicptr); - - tx4938_report_pciclk(); - tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); - if (txboard_pci66_mode == 0 && - txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) { - /* Reset PCI Bus */ - writeb(0, rbtx4938_pcireset_addr); - /* Reset PCIC */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; - tx4938_pciclk66_setup(); - mdelay(10); - /* clear PCIC reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; - writeb(1, rbtx4938_pcireset_addr); - mmiowb(); - /* Reinitialize PCIC */ - tx4938_report_pciclk(); - tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); - } - - mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]); - io_base[1] = txboard_request_phys_region_shrink(&io_size[1]); - /* Reset PCIC1 */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST; - /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */ - if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD)) - tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66; - else - tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66; - mdelay(10); - /* clear PCIC1 reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; - tx4938_report_pcic_status1(tx4938_pcic1ptr); - - printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x", - (unsigned short)(tx4938_pcic1ptr->pciid >> 16), - (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff), - (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff)); - printk("%s PCICLK:%dMHz\n", - (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "", - txx9_gbus_clock / - ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) / - 1000000); - - /* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */ - tx4938_pci_controller[1].io_resource->start = - io_base[1] - io_base[0]; - tx4938_pci_controller[1].io_resource->end = - io_base[1] - io_base[0] + io_size[1] - 1; - tx4938_pci_controller[1].mem_resource->start = mem_base[1]; - tx4938_pci_controller[1].mem_resource->end = - mem_base[1] + mem_size[1] - 1; - set_tx4938_pcicptr(1, tx4938_pcic1ptr); - - register_pci_controller(&tx4938_pci_controller[1]); - - tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb); - - /* map ioport 0 to PCI I/O space address 0 */ - set_io_port_base(KSEG1 + io_base[0]); - - return 0; -} - -arch_initcall(tx4938_pcibios_init); - -#endif /* CONFIG_PCI */ - -/* SPI support */ - -/* chip select for SPI devices */ -#define SEEPROM1_CS 7 /* PIO7 */ -#define SEEPROM2_CS 0 /* IOC */ -#define SEEPROM3_CS 1 /* IOC */ -#define SRTC_CS 2 /* IOC */ - -#ifdef CONFIG_PCI -static int __init rbtx4938_ethaddr_init(void) -{ - unsigned char dat[17]; - unsigned char sum; - int i; - - /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ - if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) { - printk(KERN_ERR "seeprom: read error.\n"); - return -ENODEV; - } else { - if (strcmp(dat, "MAC") != 0) - printk(KERN_WARNING "seeprom: bad signature.\n"); - for (i = 0, sum = 0; i < sizeof(dat); i++) - sum += dat[i]; - if (sum) - printk(KERN_WARNING "seeprom: bad checksum.\n"); - } - for (i = 0; i < 2; i++) { - unsigned int id = - TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0); - struct platform_device *pdev; - if (!(tx4938_ccfgptr->pcfg & - (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL))) - continue; - pdev = platform_device_alloc("tc35815-mac", id); - if (!pdev || - platform_device_add_data(pdev, &dat[4 + 6 * i], 6) || - platform_device_add(pdev)) - platform_device_put(pdev); - } - return 0; -} -device_initcall(rbtx4938_ethaddr_init); -#endif /* CONFIG_PCI */ - -static void __init rbtx4938_spi_setup(void) -{ - /* set SPI_SEL */ - tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL; -} - -static struct resource rbtx4938_fpga_resource; - -static char pcode_str[8]; -static struct resource tx4938_reg_resource = { - .start = TX4938_REG_BASE, - .end = TX4938_REG_BASE + TX4938_REG_SIZE, - .name = pcode_str, - .flags = IORESOURCE_MEM -}; - -void __init tx4938_board_setup(void) -{ - int i; - unsigned long divmode; - int cpuclk = 0; - unsigned long pcode = TX4938_REV_PCODE(); - - ioport_resource.start = 0x1000; - ioport_resource.end = 0xffffffff; - iomem_resource.start = 0x1000; - iomem_resource.end = 0xffffffff; /* expand to 4GB */ - - sprintf(pcode_str, "TX%lx", pcode); - /* SDRAMC,EBUSC are configured by PROM */ - for (i = 0; i < 8; i++) { - if (!(tx4938_ebuscptr->cr[i] & 0x8)) - continue; /* disabled */ - rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i); - txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i)); - } - - /* clocks */ - if (txx9_master_clock) { - /* calculate gbus_clock and cpu_clock_freq from master_clock */ - divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; - switch (divmode) { - case TX4938_CCFG_DIVMODE_8: - case TX4938_CCFG_DIVMODE_10: - case TX4938_CCFG_DIVMODE_12: - case TX4938_CCFG_DIVMODE_16: - case TX4938_CCFG_DIVMODE_18: - txx9_gbus_clock = txx9_master_clock * 4; break; - default: - txx9_gbus_clock = txx9_master_clock; - } - switch (divmode) { - case TX4938_CCFG_DIVMODE_2: - case TX4938_CCFG_DIVMODE_8: - cpuclk = txx9_gbus_clock * 2; break; - case TX4938_CCFG_DIVMODE_2_5: - case TX4938_CCFG_DIVMODE_10: - cpuclk = txx9_gbus_clock * 5 / 2; break; - case TX4938_CCFG_DIVMODE_3: - case TX4938_CCFG_DIVMODE_12: - cpuclk = txx9_gbus_clock * 3; break; - case TX4938_CCFG_DIVMODE_4: - case TX4938_CCFG_DIVMODE_16: - cpuclk = txx9_gbus_clock * 4; break; - case TX4938_CCFG_DIVMODE_4_5: - case TX4938_CCFG_DIVMODE_18: - cpuclk = txx9_gbus_clock * 9 / 2; break; - } - txx9_cpu_clock = cpuclk; - } else { - if (txx9_cpu_clock == 0) { - txx9_cpu_clock = 300000000; /* 300MHz */ - } - /* calculate gbus_clock and master_clock from cpu_clock_freq */ - cpuclk = txx9_cpu_clock; - divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; - switch (divmode) { - case TX4938_CCFG_DIVMODE_2: - case TX4938_CCFG_DIVMODE_8: - txx9_gbus_clock = cpuclk / 2; break; - case TX4938_CCFG_DIVMODE_2_5: - case TX4938_CCFG_DIVMODE_10: - txx9_gbus_clock = cpuclk * 2 / 5; break; - case TX4938_CCFG_DIVMODE_3: - case TX4938_CCFG_DIVMODE_12: - txx9_gbus_clock = cpuclk / 3; break; - case TX4938_CCFG_DIVMODE_4: - case TX4938_CCFG_DIVMODE_16: - txx9_gbus_clock = cpuclk / 4; break; - case TX4938_CCFG_DIVMODE_4_5: - case TX4938_CCFG_DIVMODE_18: - txx9_gbus_clock = cpuclk * 2 / 9; break; - } - switch (divmode) { - case TX4938_CCFG_DIVMODE_8: - case TX4938_CCFG_DIVMODE_10: - case TX4938_CCFG_DIVMODE_12: - case TX4938_CCFG_DIVMODE_16: - case TX4938_CCFG_DIVMODE_18: - txx9_master_clock = txx9_gbus_clock / 4; break; - default: - txx9_master_clock = txx9_gbus_clock; - } - } - /* change default value to udelay/mdelay take reasonable time */ - loops_per_jiffy = txx9_cpu_clock / HZ / 2; - - /* CCFG */ - /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW; - /* do reset on watchdog */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_WR; - /* clear PCIC1 reset */ - if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST) - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; - - /* enable Timeout BusError */ - if (tx4938_ccfg_toeon) - tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE; - - /* DMA selection */ - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL; - - /* Use external clock for external arbiter */ - if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB)) - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL; - - printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n", - pcode_str, - cpuclk / 1000000, txx9_master_clock / 1000000, - (unsigned long)tx4938_ccfgptr->crir, - tx4938_ccfgptr->ccfg, - tx4938_ccfgptr->pcfg); - - printk("%s SDRAMC --", pcode_str); - for (i = 0; i < 4; i++) { - unsigned long long cr = tx4938_sdramcptr->cr[i]; - unsigned long ram_base, ram_size; - if (!((unsigned long)cr & 0x00000400)) - continue; /* disabled */ - ram_base = (unsigned long)(cr >> 49) << 21; - ram_size = ((unsigned long)(cr >> 33) + 1) << 21; - if (ram_base >= 0x20000000) - continue; /* high memory (ignore) */ - printk(" CR%d:%016Lx", i, cr); - txboard_add_phys_region(ram_base, ram_size); - } - printk(" TR:%09Lx\n", tx4938_sdramcptr->tr); - - /* SRAM */ - if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) { - unsigned int size = 0x800; - unsigned long base = - (tx4938_sramcptr->cr >> (39-11)) & ~(size - 1); - txboard_add_phys_region(base, size); - } - - /* TMR */ - for (i = 0; i < TX4938_NR_TMR; i++) - txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL); - - /* enable DMA */ - for (i = 0; i < 2; i++) - ____raw_writeq(TX4938_DMA_MCR_MSTEN, - (void __iomem *)(TX4938_DMA_REG(i) + 0x50)); - - /* PIO */ - __raw_writel(0, &tx4938_pioptr->maskcpu); - __raw_writel(0, &tx4938_pioptr->maskext); - - /* TX4938 internal registers */ - if (request_resource(&iomem_resource, &tx4938_reg_resource)) - printk("request resource for internal registers failed\n"); -} - -#ifdef CONFIG_PCI -static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr) -{ - unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16); - unsigned long g2pstatus = pcicptr->g2pstatus; - unsigned long pcicstatus = pcicptr->pcicstatus; - static struct { - unsigned long flag; - const char *str; - } pcistat_tbl[] = { - { PCI_STATUS_DETECTED_PARITY, "DetectedParityError" }, - { PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" }, - { PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" }, - { PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" }, - { PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" }, - { PCI_STATUS_PARITY, "MasterParityError" }, - }, g2pstat_tbl[] = { - { TX4938_PCIC_G2PSTATUS_TTOE, "TIOE" }, - { TX4938_PCIC_G2PSTATUS_RTOE, "RTOE" }, - }, pcicstat_tbl[] = { - { TX4938_PCIC_PCICSTATUS_PME, "PME" }, - { TX4938_PCIC_PCICSTATUS_TLB, "TLB" }, - { TX4938_PCIC_PCICSTATUS_NIB, "NIB" }, - { TX4938_PCIC_PCICSTATUS_ZIB, "ZIB" }, - { TX4938_PCIC_PCICSTATUS_PERR, "PERR" }, - { TX4938_PCIC_PCICSTATUS_SERR, "SERR" }, - { TX4938_PCIC_PCICSTATUS_GBE, "GBE" }, - { TX4938_PCIC_PCICSTATUS_IWB, "IWB" }, - }; - int i; - - printk("pcistat:%04x(", pcistatus); - for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++) - if (pcistatus & pcistat_tbl[i].flag) - printk("%s ", pcistat_tbl[i].str); - printk("), g2pstatus:%08lx(", g2pstatus); - for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++) - if (g2pstatus & g2pstat_tbl[i].flag) - printk("%s ", g2pstat_tbl[i].str); - printk("), pcicstatus:%08lx(", pcicstatus); - for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++) - if (pcicstatus & pcicstat_tbl[i].flag) - printk("%s ", pcicstat_tbl[i].str); - printk(")\n"); -} - -void tx4938_report_pcic_status(void) -{ - int i; - struct tx4938_pcic_reg *pcicptr; - for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++) - tx4938_report_pcic_status1(pcicptr); -} - -#endif /* CONFIG_PCI */ - -void __init plat_time_init(void) -{ - mips_hpt_frequency = txx9_cpu_clock / 2; - if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS) - txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL, - TXX9_IRQ_BASE + TX4938_IR_TMR(0), - txx9_gbus_clock / 2); -} - -void __init plat_mem_setup(void) -{ - unsigned long long pcfg; - char *argptr; - - iomem_resource.end = 0xffffffff; /* 4GB */ - - if (txx9_master_clock == 0) - txx9_master_clock = 25000000; /* 25MHz */ - tx4938_board_setup(); -#ifndef CONFIG_PCI - set_io_port_base(RBTX4938_ETHER_BASE); -#endif - -#ifdef CONFIG_SERIAL_TXX9 - { - extern int early_serial_txx9_setup(struct uart_port *port); - int i; - struct uart_port req; - for(i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (char *)(0xff1ff300 + i * 0x100); - req.mapbase = 0xff1ff300 + i * 0x100; - req.irq = RBTX4938_IRQ_IRC_SIO(i); - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = 50000000; - early_serial_txx9_setup(&req); - } - } -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (strstr(argptr, "console=") == NULL) { - strcat(argptr, " console=ttyS0,38400"); - } -#endif -#endif - -#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 - printk("PIOSEL: disabling both ata and nand selection\n"); - local_irq_disable(); - tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); -#endif - -#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND - printk("PIOSEL: enabling nand selection\n"); - tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL; - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL; -#endif - -#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA - printk("PIOSEL: enabling ata selection\n"); - tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL; - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL; -#endif - -#ifdef CONFIG_IP_PNP - argptr = prom_getcmdline(); - if (strstr(argptr, "ip=") == NULL) { - strcat(argptr, " ip=any"); - } -#endif - - -#ifdef CONFIG_FB - { - conswitchp = &dummy_con; - } -#endif - - rbtx4938_spi_setup(); - pcfg = tx4938_ccfgptr->pcfg; /* updated */ - /* fixup piosel */ - if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == - TX4938_PCFG_ATA_SEL) - writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04, - rbtx4938_piosel_addr); - else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == - TX4938_PCFG_NDF_SEL) - writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08, - rbtx4938_piosel_addr); - else - writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04), - rbtx4938_piosel_addr); - - rbtx4938_fpga_resource.name = "FPGA Registers"; - rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR); - rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff; - rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY; - if (request_resource(&iomem_resource, &rbtx4938_fpga_resource)) - printk("request resource for fpga failed\n"); - - _machine_restart = rbtx4938_machine_restart; - _machine_halt = rbtx4938_machine_halt; - pm_power_off = rbtx4938_machine_power_off; - - writeb(0xff, rbtx4938_led_addr); - printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", - readb(rbtx4938_fpga_rev_addr), - readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr)); -} - -static int __init rbtx4938_ne_init(void) -{ - struct resource res[] = { - { - .start = RBTX4938_RTL_8019_BASE, - .end = RBTX4938_RTL_8019_BASE + 0x20 - 1, - .flags = IORESOURCE_IO, - }, { - .start = RBTX4938_RTL_8019_IRQ, - .flags = IORESOURCE_IRQ, - } - }; - struct platform_device *dev = - platform_device_register_simple("ne", -1, - res, ARRAY_SIZE(res)); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} -device_initcall(rbtx4938_ne_init); - -/* GPIO support */ - -int gpio_to_irq(unsigned gpio) -{ - return -EINVAL; -} - -int irq_to_gpio(unsigned irq) -{ - return -EINVAL; -} - -static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock); - -static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset, - int value) -{ - u8 val; - unsigned long flags; - spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags); - val = readb(rbtx4938_spics_addr); - if (value) - val |= 1 << offset; - else - val &= ~(1 << offset); - writeb(val, rbtx4938_spics_addr); - mmiowb(); - spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags); -} - -static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip, - unsigned int offset, int value) -{ - rbtx4938_spi_gpio_set(chip, offset, value); - return 0; -} - -static struct gpio_chip rbtx4938_spi_gpio_chip = { - .set = rbtx4938_spi_gpio_set, - .direction_output = rbtx4938_spi_gpio_dir_out, - .label = "RBTX4938-SPICS", - .base = 16, - .ngpio = 3, -}; - -/* SPI support */ - -static void __init txx9_spi_init(unsigned long base, int irq) -{ - struct resource res[] = { - { - .start = base, - .end = base + 0x20 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = irq, - .flags = IORESOURCE_IRQ, - }, - }; - platform_device_register_simple("spi_txx9", 0, - res, ARRAY_SIZE(res)); -} - -static int __init rbtx4938_spi_init(void) -{ - struct spi_board_info srtc_info = { - .modalias = "rtc-rs5c348", - .max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */ - .bus_num = 0, - .chip_select = 16 + SRTC_CS, - /* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS */ - .mode = SPI_MODE_1 | SPI_CS_HIGH, - }; - spi_register_board_info(&srtc_info, 1); - spi_eeprom_register(SEEPROM1_CS); - spi_eeprom_register(16 + SEEPROM2_CS); - spi_eeprom_register(16 + SEEPROM3_CS); - gpio_request(16 + SRTC_CS, "rtc-rs5c348"); - gpio_direction_output(16 + SRTC_CS, 0); - gpio_request(SEEPROM1_CS, "seeprom1"); - gpio_direction_output(SEEPROM1_CS, 1); - gpio_request(16 + SEEPROM2_CS, "seeprom2"); - gpio_direction_output(16 + SEEPROM2_CS, 1); - gpio_request(16 + SEEPROM3_CS, "seeprom3"); - gpio_direction_output(16 + SEEPROM3_CS, 1); - txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI); - return 0; -} - -static int __init rbtx4938_arch_init(void) -{ - txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16); - gpiochip_add(&rbtx4938_spi_gpio_chip); - return rbtx4938_spi_init(); -} -arch_initcall(rbtx4938_arch_init); - -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init rbtx4938_wdt_init(void) -{ - return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); -} -device_initcall(rbtx4938_wdt_init); - -/* Minimum CLK support */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "spi-baseclk")) - return (struct clk *)(txx9_gbus_clock / 2 / 4); - if (!strcmp(id, "imbus_clk")) - return (struct clk *)(txx9_gbus_clock / 2); - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return (unsigned long)clk; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c deleted file mode 100644 index 4d6b4ade5e8c..000000000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include -#include - -#define AT250X0_PAGE_SIZE 8 - -/* register board information for at25 driver */ -int __init spi_eeprom_register(int chipid) -{ - static struct spi_eeprom eeprom = { - .name = "at250x0", - .byte_len = 128, - .page_size = AT250X0_PAGE_SIZE, - .flags = EE_ADDR1, - }; - struct spi_board_info info = { - .modalias = "at25", - .max_speed_hz = 1500000, /* 1.5Mbps */ - .bus_num = 0, - .chip_select = chipid, - .platform_data = &eeprom, - /* Mode 0: High-Active, Sample-Then-Shift */ - }; - - return spi_register_board_info(&info, 1); -} - -/* simple temporary spi driver to provide early access to seeprom. */ - -static struct read_param { - int chipid; - int address; - unsigned char *buf; - int len; -} *read_param; - -static int __init early_seeprom_probe(struct spi_device *spi) -{ - int stat = 0; - u8 cmd[2]; - int len = read_param->len; - char *buf = read_param->buf; - int address = read_param->address; - - dev_info(&spi->dev, "spiclk %u KHz.\n", - (spi->max_speed_hz + 500) / 1000); - if (read_param->chipid != spi->chip_select) - return -ENODEV; - while (len > 0) { - /* spi_write_then_read can only work with small chunk */ - int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE; - cmd[0] = 0x03; /* AT25_READ */ - cmd[1] = address; - stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c); - buf += c; - len -= c; - address += c; - } - return stat; -} - -static struct spi_driver early_seeprom_driver __initdata = { - .driver = { - .name = "at25", - .owner = THIS_MODULE, - }, - .probe = early_seeprom_probe, -}; - -int __init spi_eeprom_read(int chipid, int address, - unsigned char *buf, int len) -{ - int ret; - struct read_param param = { - .chipid = chipid, - .address = address, - .buf = buf, - .len = len - }; - - read_param = ¶m; - ret = spi_register_driver(&early_seeprom_driver); - if (!ret) - spi_unregister_driver(&early_seeprom_driver); - return ret; -} diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig new file mode 100644 index 000000000000..98d103402b10 --- /dev/null +++ b/arch/mips/txx9/Kconfig @@ -0,0 +1,28 @@ +config TOSHIBA_FPCIB0 + bool "FPCIB0 Backplane Support" + depends on TOSHIBA_RBTX4927 + +if TOSHIBA_RBTX4938 + +comment "Multiplex Pin Select" +choice + prompt "PIO[58:61]" + default TOSHIBA_RBTX4938_MPLEX_PIO58_61 + +config TOSHIBA_RBTX4938_MPLEX_PIO58_61 + bool "PIO" +config TOSHIBA_RBTX4938_MPLEX_NAND + bool "NAND" +config TOSHIBA_RBTX4938_MPLEX_ATA + bool "ATA" + +endchoice + +config TX4938_NAND_BOOT + depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND + bool "NAND Boot Support (EXPERIMENTAL)" + help + This is only for Toshiba RBTX4938 reference board, which has NAND IPL. + Select this option if you need to use NAND boot. + +endif diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile new file mode 100644 index 000000000000..8cb4a7e81473 --- /dev/null +++ b/arch/mips/txx9/generic/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for common code for TXx9 based systems +# + +obj-$(CONFIG_TOSHIBA_RBTX4927) += mem_tx4927.o irq_tx4927.o +obj-$(CONFIG_TOSHIBA_RBTX4938) += mem_tx4938.o irq_tx4938.o +obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o +obj-$(CONFIG_KGDB) += dbgio.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/generic/dbgio.c b/arch/mips/txx9/generic/dbgio.c new file mode 100644 index 000000000000..33b9c672a322 --- /dev/null +++ b/arch/mips/txx9/generic/dbgio.c @@ -0,0 +1,48 @@ +/* + * linux/arch/mips/tx4938/common/dbgio.c + * + * kgdb interface for gdb + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2005 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Support for TX4938 in 2.6 - Hiroshi DOYU + */ + +#include + +extern u8 txx9_sio_kdbg_rd(void); +extern int txx9_sio_kdbg_wr( u8 ch ); + +u8 getDebugChar(void) +{ + return (txx9_sio_kdbg_rd()); +} + +int putDebugChar(u8 byte) +{ + return (txx9_sio_kdbg_wr(byte)); +} + diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c new file mode 100644 index 000000000000..685ecc2ed551 --- /dev/null +++ b/arch/mips/txx9/generic/irq_tx4927.c @@ -0,0 +1,64 @@ +/* + * Common tx4927 irq handler + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#ifdef CONFIG_TOSHIBA_RBTX4927 +#include +#endif + +void __init tx4927_irq_init(void) +{ + mips_cpu_irq_init(); + txx9_irq_init(TX4927_IRC_REG); + set_irq_chained_handler(TX4927_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) /* cpu timer */ + do_IRQ(TX4927_IRQ_CPU_TIMER); + else if (pending & STATUSF_IP2) { /* tx4927 pic */ + int irq = txx9_irq(); +#ifdef CONFIG_TOSHIBA_RBTX4927 + if (irq == TX4927_IRQ_NEST_EXT_ON_PIC) + irq = toshiba_rbtx4927_irq_nested(irq); +#endif + if (unlikely(irq < 0)) { + spurious_interrupt(); + return; + } + do_IRQ(irq); + } else if (pending & STATUSF_IP0) /* user line 0 */ + do_IRQ(TX4927_IRQ_USER0); + else if (pending & STATUSF_IP1) /* user line 1 */ + do_IRQ(TX4927_IRQ_USER1); + else + spurious_interrupt(); +} diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c new file mode 100644 index 000000000000..0886d9138818 --- /dev/null +++ b/arch/mips/txx9/generic/irq_tx4938.c @@ -0,0 +1,48 @@ +/* + * linux/arch/mips/tx4938/common/irq.c + * + * Common tx4938 irq handler + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#include +#include +#include +#include +#include + +void __init +tx4938_irq_init(void) +{ + mips_cpu_irq_init(); + txx9_irq_init(TX4938_IRC_REG); + set_irq_chained_handler(TX4938_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); +} + +int toshiba_rbtx4938_irq_nested(int irq); + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP7) + do_IRQ(TX4938_IRQ_CPU_TIMER); + else if (pending & STATUSF_IP2) { + int irq = txx9_irq(); + if (irq == TX4938_IRQ_PIC_BEG + TX4938_IR_INT(0)) + irq = toshiba_rbtx4938_irq_nested(irq); + if (irq >= 0) + do_IRQ(irq); + else + spurious_interrupt(); + } else if (pending & STATUSF_IP1) + do_IRQ(TX4938_IRQ_USER1); + else if (pending & STATUSF_IP0) + do_IRQ(TX4938_IRQ_USER0); +} diff --git a/arch/mips/txx9/generic/mem_tx4927.c b/arch/mips/txx9/generic/mem_tx4927.c new file mode 100644 index 000000000000..12dfc377bf2f --- /dev/null +++ b/arch/mips/txx9/generic/mem_tx4927.c @@ -0,0 +1,141 @@ +/* + * linux/arch/mips/tx4927/common/tx4927_prom.c + * + * common tx4927 memory interface + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +static unsigned int __init tx4927_process_sdccr(unsigned long addr) +{ + u64 val; + unsigned int sdccr_ce; + unsigned int sdccr_bs; + unsigned int sdccr_rs; + unsigned int sdccr_cs; + unsigned int sdccr_mw; + unsigned int bs = 0; + unsigned int rs = 0; + unsigned int cs = 0; + unsigned int mw = 0; + unsigned int msize = 0; + + val = __raw_readq((void __iomem *)addr); + + /* MVMCP -- need #defs for these bits masks */ + sdccr_ce = ((val & (1 << 10)) >> 10); + sdccr_bs = ((val & (1 << 8)) >> 8); + sdccr_rs = ((val & (3 << 5)) >> 5); + sdccr_cs = ((val & (3 << 2)) >> 2); + sdccr_mw = ((val & (1 << 0)) >> 0); + + if (sdccr_ce) { + switch (sdccr_bs) { + case 0:{ + bs = 2; + break; + } + case 1:{ + bs = 4; + break; + } + } + switch (sdccr_rs) { + case 0:{ + rs = 2048; + break; + } + case 1:{ + rs = 4096; + break; + } + case 2:{ + rs = 8192; + break; + } + case 3:{ + rs = 0; + break; + } + } + switch (sdccr_cs) { + case 0:{ + cs = 256; + break; + } + case 1:{ + cs = 512; + break; + } + case 2:{ + cs = 1024; + break; + } + case 3:{ + cs = 2048; + break; + } + } + switch (sdccr_mw) { + case 0:{ + mw = 8; + break; + } /* 8 bytes = 64 bits */ + case 1:{ + mw = 4; + break; + } /* 4 bytes = 32 bits */ + } + } + + /* bytes per chip MB per chip num chips */ + msize = (((rs * cs * mw) / (1024 * 1024)) * bs); + + return (msize); +} + + +unsigned int __init tx4927_get_mem_size(void) +{ + unsigned int c0; + unsigned int c1; + unsigned int c2; + unsigned int c3; + unsigned int total; + + /* MVMCP -- need #defs for these registers */ + c0 = tx4927_process_sdccr(0xff1f8000); + c1 = tx4927_process_sdccr(0xff1f8008); + c2 = tx4927_process_sdccr(0xff1f8010); + c3 = tx4927_process_sdccr(0xff1f8018); + total = c0 + c1 + c2 + c3; + + return (total); +} diff --git a/arch/mips/txx9/generic/mem_tx4938.c b/arch/mips/txx9/generic/mem_tx4938.c new file mode 100644 index 000000000000..20baeaeba4cd --- /dev/null +++ b/arch/mips/txx9/generic/mem_tx4938.c @@ -0,0 +1,124 @@ +/* + * linux/arch/mips/tx4938/common/prom.c + * + * common tx4938 memory interface + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ + +#include +#include +#include + +static unsigned int __init +tx4938_process_sdccr(u64 * addr) +{ + u64 val; + unsigned int sdccr_ce; + unsigned int sdccr_rs; + unsigned int sdccr_cs; + unsigned int sdccr_mw; + unsigned int rs = 0; + unsigned int cs = 0; + unsigned int mw = 0; + unsigned int bc = 4; + unsigned int msize = 0; + + val = ____raw_readq((void __iomem *)addr); + + /* MVMCP -- need #defs for these bits masks */ + sdccr_ce = ((val & (1 << 10)) >> 10); + sdccr_rs = ((val & (3 << 5)) >> 5); + sdccr_cs = ((val & (7 << 2)) >> 2); + sdccr_mw = ((val & (1 << 0)) >> 0); + + if (sdccr_ce) { + switch (sdccr_rs) { + case 0:{ + rs = 2048; + break; + } + case 1:{ + rs = 4096; + break; + } + case 2:{ + rs = 8192; + break; + } + default:{ + rs = 0; + break; + } + } + switch (sdccr_cs) { + case 0:{ + cs = 256; + break; + } + case 1:{ + cs = 512; + break; + } + case 2:{ + cs = 1024; + break; + } + case 3:{ + cs = 2048; + break; + } + case 4:{ + cs = 4096; + break; + } + default:{ + cs = 0; + break; + } + } + switch (sdccr_mw) { + case 0:{ + mw = 8; + break; + } /* 8 bytes = 64 bits */ + case 1:{ + mw = 4; + break; + } /* 4 bytes = 32 bits */ + } + } + + /* bytes per chip MB per chip bank count */ + msize = (((rs * cs * mw) / (1024 * 1024)) * (bc)); + + /* MVMCP -- bc hard coded to 4 from table 9.3.1 */ + /* boad supports bc=2 but no way to detect */ + + return (msize); +} + +unsigned int __init +tx4938_get_mem_size(void) +{ + unsigned int c0; + unsigned int c1; + unsigned int c2; + unsigned int c3; + unsigned int total; + + /* MVMCP -- need #defs for these registers */ + c0 = tx4938_process_sdccr((u64 *) 0xff1f8000); + c1 = tx4938_process_sdccr((u64 *) 0xff1f8008); + c2 = tx4938_process_sdccr((u64 *) 0xff1f8010); + c3 = tx4938_process_sdccr((u64 *) 0xff1f8018); + total = c0 + c1 + c2 + c3; + + return (total); +} diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c new file mode 100644 index 000000000000..69e487467fa5 --- /dev/null +++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c @@ -0,0 +1,172 @@ +/* + * Interface for smsc fdc48m81x Super IO chip + * + * Author: MontaVista Software, Inc. source@mvista.com + * + * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright 2004 (c) MontaVista Software, Inc. + */ +#include +#include +#include +#include + +#define DEBUG + +/* Common Registers */ +#define SMSC_FDC37M81X_CONFIG_INDEX 0x00 +#define SMSC_FDC37M81X_CONFIG_DATA 0x01 +#define SMSC_FDC37M81X_CONF 0x02 +#define SMSC_FDC37M81X_INDEX 0x03 +#define SMSC_FDC37M81X_DNUM 0x07 +#define SMSC_FDC37M81X_DID 0x20 +#define SMSC_FDC37M81X_DREV 0x21 +#define SMSC_FDC37M81X_PCNT 0x22 +#define SMSC_FDC37M81X_PMGT 0x23 +#define SMSC_FDC37M81X_OSC 0x24 +#define SMSC_FDC37M81X_CONFPA0 0x26 +#define SMSC_FDC37M81X_CONFPA1 0x27 +#define SMSC_FDC37M81X_TEST4 0x2B +#define SMSC_FDC37M81X_TEST5 0x2C +#define SMSC_FDC37M81X_TEST1 0x2D +#define SMSC_FDC37M81X_TEST2 0x2E +#define SMSC_FDC37M81X_TEST3 0x2F + +/* Logical device numbers */ +#define SMSC_FDC37M81X_FDD 0x00 +#define SMSC_FDC37M81X_SERIAL1 0x04 +#define SMSC_FDC37M81X_SERIAL2 0x05 +#define SMSC_FDC37M81X_KBD 0x07 + +/* Logical device Config Registers */ +#define SMSC_FDC37M81X_ACTIVE 0x30 +#define SMSC_FDC37M81X_BASEADDR0 0x60 +#define SMSC_FDC37M81X_BASEADDR1 0x61 +#define SMSC_FDC37M81X_INT 0x70 +#define SMSC_FDC37M81X_INT2 0x72 +#define SMSC_FDC37M81X_MODE 0xF0 + +/* Chip Config Values */ +#define SMSC_FDC37M81X_CONFIG_ENTER 0x55 +#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa +#define SMSC_FDC37M81X_CHIP_ID 0x4d + +static unsigned long g_smsc_fdc37m81x_base = 0; + +static inline unsigned char smsc_fdc37m81x_rd(unsigned char index) +{ + outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); + + return inb(g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA); +} + +static inline void smsc_dc37m81x_wr(unsigned char index, unsigned char data) +{ + outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); + outb(data, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA); +} + +void smsc_fdc37m81x_config_beg(void) +{ + if (g_smsc_fdc37m81x_base) { + outb(SMSC_FDC37M81X_CONFIG_ENTER, + g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); + } +} + +void smsc_fdc37m81x_config_end(void) +{ + if (g_smsc_fdc37m81x_base) + outb(SMSC_FDC37M81X_CONFIG_EXIT, + g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); +} + +u8 smsc_fdc37m81x_config_get(u8 reg) +{ + u8 val = 0; + + if (g_smsc_fdc37m81x_base) + val = smsc_fdc37m81x_rd(reg); + + return val; +} + +void smsc_fdc37m81x_config_set(u8 reg, u8 val) +{ + if (g_smsc_fdc37m81x_base) + smsc_dc37m81x_wr(reg, val); +} + +unsigned long __init smsc_fdc37m81x_init(unsigned long port) +{ + const int field = sizeof(unsigned long) * 2; + u8 chip_id; + + if (g_smsc_fdc37m81x_base) + printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n", + field, g_smsc_fdc37m81x_base); + + g_smsc_fdc37m81x_base = port; + + smsc_fdc37m81x_config_beg(); + + chip_id = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DID); + if (chip_id == SMSC_FDC37M81X_CHIP_ID) + smsc_fdc37m81x_config_end(); + else { + printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n", + chip_id); + g_smsc_fdc37m81x_base = 0; + } + + return g_smsc_fdc37m81x_base; +} + +#ifdef DEBUG +void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg) +{ + printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg, + smsc_fdc37m81x_rd(reg)); +} + +void smsc_fdc37m81x_config_dump(void) +{ + u8 orig; + char *fname = "smsc_fdc37m81x_config_dump()"; + + smsc_fdc37m81x_config_beg(); + + orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM); + + printk("%s: common\n", fname); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_DNUM); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_DID); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_DREV); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_PCNT); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_PMGT); + + printk("%s: keyboard\n", fname); + smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, + SMSC_FDC37M81X_ACTIVE); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, + SMSC_FDC37M81X_INT); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, + SMSC_FDC37M81X_INT2); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, + SMSC_FDC37M81X_LDCR_F0); + + smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, orig); + + smsc_fdc37m81x_config_end(); +} +#endif diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile new file mode 100644 index 000000000000..5f83ea375225 --- /dev/null +++ b/arch/mips/txx9/jmr3927/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for TOSHIBA JMR-TX3927 board +# + +obj-y += prom.o init.o irq.o setup.o +obj-$(CONFIG_KGDB) += kgdb_io.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/jmr3927/init.c b/arch/mips/txx9/jmr3927/init.c new file mode 100644 index 000000000000..1bbb5343baf4 --- /dev/null +++ b/arch/mips/txx9/jmr3927/init.c @@ -0,0 +1,57 @@ +/* + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com + * + * arch/mips/jmr3927/common/init.c + * + * Copyright (C) 2000-2001 Toshiba Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include + +extern void __init prom_init_cmdline(void); + +const char *get_system_type(void) +{ + return "Toshiba" +#ifdef CONFIG_TOSHIBA_JMR3927 + " JMR_TX3927" +#endif + ; +} + +extern void puts(const char *cp); + +void __init prom_init(void) +{ +#ifdef CONFIG_TOSHIBA_JMR3927 + /* CCFG */ + if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) + puts("Warning: TX3927 TLB off\n"); +#endif + + prom_init_cmdline(); + add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); +} diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c new file mode 100644 index 000000000000..85e1daf15c7b --- /dev/null +++ b/arch/mips/txx9/jmr3927/irq.c @@ -0,0 +1,174 @@ +/* + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2001 Toshiba Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#if JMR3927_IRQ_END > NR_IRQS +#error JMR3927_IRQ_END > NR_IRQS +#endif + +static unsigned char irc_level[TX3927_NUM_IR] = { + 5, 5, 5, 5, 5, 5, /* INT[5:0] */ + 7, 7, /* SIO */ + 5, 5, 5, 0, 0, /* DMA, PIO, PCI */ + 6, 6, 6 /* TMR */ +}; + +/* + * CP0_STATUS is a thread's resource (saved/restored on context switch). + * So disable_irq/enable_irq MUST handle IOC/IRC registers. + */ +static void mask_irq_ioc(unsigned int irq) +{ + /* 0: mask */ + unsigned int irq_nr = irq - JMR3927_IRQ_IOC; + unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR); + unsigned int bit = 1 << irq_nr; + jmr3927_ioc_reg_out(imask & ~bit, JMR3927_IOC_INTM_ADDR); + /* flush write buffer */ + (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); +} +static void unmask_irq_ioc(unsigned int irq) +{ + /* 0: mask */ + unsigned int irq_nr = irq - JMR3927_IRQ_IOC; + unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR); + unsigned int bit = 1 << irq_nr; + jmr3927_ioc_reg_out(imask | bit, JMR3927_IOC_INTM_ADDR); + /* flush write buffer */ + (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long cp0_cause = read_c0_cause(); + int irq; + + if ((cp0_cause & CAUSEF_IP7) == 0) + return; + irq = (cp0_cause >> CAUSEB_IP2) & 0x0f; + + do_IRQ(irq + JMR3927_IRQ_IRC); +} + +static irqreturn_t jmr3927_ioc_interrupt(int irq, void *dev_id) +{ + unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR); + int i; + + for (i = 0; i < JMR3927_NR_IRQ_IOC; i++) { + if (istat & (1 << i)) { + irq = JMR3927_IRQ_IOC + i; + do_IRQ(irq); + } + } + return IRQ_HANDLED; +} + +static struct irqaction ioc_action = { + .handler = jmr3927_ioc_interrupt, + .mask = CPU_MASK_NONE, + .name = "IOC", +}; + +static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id) +{ + printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq); + printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n", + tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat); + + return IRQ_HANDLED; +} +static struct irqaction pcierr_action = { + .handler = jmr3927_pcierr_interrupt, + .mask = CPU_MASK_NONE, + .name = "PCI error", +}; + +static void __init jmr3927_irq_init(void); + +void __init arch_init_irq(void) +{ + /* Now, interrupt control disabled, */ + /* all IRC interrupts are masked, */ + /* all IRC interrupt mode are Low Active. */ + + /* mask all IOC interrupts */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_INTM_ADDR); + /* setup IOC interrupt mode (SOFT:High Active, Others:Low Active) */ + jmr3927_ioc_reg_out(JMR3927_IOC_INTF_SOFT, JMR3927_IOC_INTP_ADDR); + + /* clear PCI Soft interrupts */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_INTS1_ADDR); + /* clear PCI Reset interrupts */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + + jmr3927_irq_init(); + + /* setup IOC interrupt 1 (PCI, MODEM) */ + setup_irq(JMR3927_IRQ_IOCINT, &ioc_action); + +#ifdef CONFIG_PCI + setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action); +#endif + + /* enable all CPU interrupt bits. */ + set_c0_status(ST0_IM); /* IE bit is still 0. */ +} + +static struct irq_chip jmr3927_irq_ioc = { + .name = "jmr3927_ioc", + .ack = mask_irq_ioc, + .mask = mask_irq_ioc, + .mask_ack = mask_irq_ioc, + .unmask = unmask_irq_ioc, +}; + +static void __init jmr3927_irq_init(void) +{ + u32 i; + + txx9_irq_init(TX3927_IRC_REG); + for (i = 0; i < TXx9_MAX_IR; i++) + txx9_irq_set_pri(i, irc_level[i]); + for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++) + set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq); +} diff --git a/arch/mips/txx9/jmr3927/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c new file mode 100644 index 000000000000..5bd757e56f79 --- /dev/null +++ b/arch/mips/txx9/jmr3927/kgdb_io.c @@ -0,0 +1,105 @@ +/* + * BRIEF MODULE DESCRIPTION + * Low level uart routines to directly access a TX[34]927 SIO. + * + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com or source@mvista.com + * + * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c + * + * Copyright (C) 2000-2001 Toshiba Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#define TIMEOUT 0xffffff + +static int remoteDebugInitialized = 0; +static void debugInit(int baud); + +int putDebugChar(unsigned char c) +{ + int i = 0; + + if (!remoteDebugInitialized) { + remoteDebugInitialized = 1; + debugInit(38400); + } + + do { + slow_down(); + i++; + if (i>TIMEOUT) { + break; + } + } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS)); + tx3927_sioptr(0)->tfifo = c; + + return 1; +} + +unsigned char getDebugChar(void) +{ + int i = 0; + int dicr; + char c; + + if (!remoteDebugInitialized) { + remoteDebugInitialized = 1; + debugInit(38400); + } + + /* diable RX int. */ + dicr = tx3927_sioptr(0)->dicr; + tx3927_sioptr(0)->dicr = 0; + + do { + slow_down(); + i++; + if (i>TIMEOUT) { + break; + } + } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID) + ; + c = tx3927_sioptr(0)->rfifo; + + /* clear RX int. status */ + tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS; + /* enable RX int. */ + tx3927_sioptr(0)->dicr = dicr; + + return c; +} + +static void debugInit(int baud) +{ + tx3927_sioptr(0)->lcr = 0x020; + tx3927_sioptr(0)->dicr = 0; + tx3927_sioptr(0)->disr = 0x4100; + tx3927_sioptr(0)->cisr = 0x014; + tx3927_sioptr(0)->fcr = 0; + tx3927_sioptr(0)->flcr = 0x02; + tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) | + TXx927_SIBGR_BCLK_T0; +} diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c new file mode 100644 index 000000000000..8bc1049b622e --- /dev/null +++ b/arch/mips/txx9/jmr3927/prom.c @@ -0,0 +1,98 @@ +/* + * BRIEF MODULE DESCRIPTION + * PROM library initialisation code, assuming a version of + * pmon is the boot code. + * + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com + * + * Based on arch/mips/au1000/common/prom.c + * + * This file was derived from Carsten Langgaard's + * arch/mips/mips-boards/xx files. + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include + +#include +#include + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +void __init prom_init_cmdline(void) +{ + char *cp; + int actr; + int prom_argc = fw_arg0; + char **prom_argv = (char **) fw_arg1; + + actr = 1; /* Always ignore argv[0] */ + + cp = &(arcs_cmdline[0]); + while(actr < prom_argc) { + strcpy(cp, prom_argv[actr]); + cp += strlen(prom_argv[actr]); + *cp++ = ' '; + actr++; + } + if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ + --cp; + *cp = '\0'; +} + +void __init prom_free_prom_memory(void) +{ +} + +#define TIMEOUT 0xffffff + +void +prom_putchar(char c) +{ + int i = 0; + + do { + i++; + if (i>TIMEOUT) + break; + } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS)); + tx3927_sioptr(1)->tfifo = c; + return; +} + +void +puts(const char *cp) +{ + while (*cp) + prom_putchar(*cp++); + prom_putchar('\r'); + prom_putchar('\n'); +} diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c new file mode 100644 index 000000000000..41e0f3b3af2c --- /dev/null +++ b/arch/mips/txx9/jmr3927/setup.c @@ -0,0 +1,445 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com + * + * Copyright (C) 2000-2001 Toshiba Corporation + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SERIAL_TXX9 +#include +#endif + +#include +#include +#include +#include +#include + +extern void puts(const char *cp); + +/* don't enable - see errata */ +static int jmr3927_ccfg_toeon; + +static inline void do_reset(void) +{ +#if 1 /* Resetting PCI bus */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR); + (void)jmr3927_ioc_reg_in(JMR3927_IOC_RESET_ADDR); /* flush WB */ + mdelay(1); + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); +#endif + jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR); +} + +static void jmr3927_machine_restart(char *command) +{ + local_irq_disable(); + puts("Rebooting..."); + do_reset(); +} + +static void jmr3927_machine_halt(void) +{ + puts("JMR-TX3927 halted.\n"); + while (1); +} + +static void jmr3927_machine_power_off(void) +{ + puts("JMR-TX3927 halted. Please turn off the power.\n"); + while (1); +} + +void __init plat_time_init(void) +{ + txx9_clockevent_init(TX3927_TMR_REG(0), + TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0), + JMR3927_IMCLK); + txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK); +} + +#define DO_WRITE_THROUGH +#define DO_ENABLE_CACHE + +extern char * __init prom_getcmdline(void); +static void jmr3927_board_init(void); +extern struct resource pci_io_resource; +extern struct resource pci_mem_resource; + +void __init plat_mem_setup(void) +{ + char *argptr; + + set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO); + + _machine_restart = jmr3927_machine_restart; + _machine_halt = jmr3927_machine_halt; + pm_power_off = jmr3927_machine_power_off; + + /* + * IO/MEM resources. + */ + ioport_resource.start = pci_io_resource.start; + ioport_resource.end = pci_io_resource.end; + iomem_resource.start = 0; + iomem_resource.end = 0xffffffff; + + /* Reboot on panic */ + panic_timeout = 180; + + /* cache setup */ + { + unsigned int conf; +#ifdef DO_ENABLE_CACHE + int mips_ic_disable = 0, mips_dc_disable = 0; +#else + int mips_ic_disable = 1, mips_dc_disable = 1; +#endif +#ifdef DO_WRITE_THROUGH + int mips_config_cwfon = 0; + int mips_config_wbon = 0; +#else + int mips_config_cwfon = 1; + int mips_config_wbon = 1; +#endif + + conf = read_c0_conf(); + conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON); + conf |= mips_ic_disable ? 0 : TX39_CONF_ICE; + conf |= mips_dc_disable ? 0 : TX39_CONF_DCE; + conf |= mips_config_wbon ? TX39_CONF_WBON : 0; + conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0; + + write_c0_conf(conf); + write_c0_cache(0); + } + + /* initialize board */ + jmr3927_board_init(); + + argptr = prom_getcmdline(); + + if ((argptr = strstr(argptr, "toeon")) != NULL) + jmr3927_ccfg_toeon = 1; + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "ip=")) == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " ip=bootp"); + } + +#ifdef CONFIG_SERIAL_TXX9 + { + extern int early_serial_txx9_setup(struct uart_port *port); + int i; + struct uart_port req; + for(i = 0; i < 2; i++) { + memset(&req, 0, sizeof(req)); + req.line = i; + req.iotype = UPIO_MEM; + req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i); + req.mapbase = TX3927_SIO_REG(i); + req.irq = i == 0 ? + JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1; + if (i == 0) + req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; + req.uartclk = JMR3927_IMCLK; + early_serial_txx9_setup(&req); + } + } +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "console=")) == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " console=ttyS1,115200"); + } +#endif +#endif +} + +static void tx3927_setup(void); + +static void __init jmr3927_board_init(void) +{ + tx3927_setup(); + + /* SIO0 DTR on */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); + + jmr3927_led_set(0); + + printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", + jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, + jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, + jmr3927_dipsw1(), jmr3927_dipsw2(), + jmr3927_dipsw3(), jmr3927_dipsw4()); +} + +static void __init tx3927_setup(void) +{ + int i; +#ifdef CONFIG_PCI + unsigned long mips_pci_io_base = JMR3927_PCIIO; + unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE; + unsigned long mips_pci_mem_base = JMR3927_PCIMEM; + unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE; + /* for legacy I/O, PCI I/O PCI Bus address must be 0 */ + unsigned long mips_pci_io_pciaddr = 0; +#endif + + /* SDRAMC are configured by PROM */ + + /* ROMC */ + tx3927_romcptr->cr[1] = JMR3927_ROMCE1 | 0x00030048; + tx3927_romcptr->cr[2] = JMR3927_ROMCE2 | 0x000064c8; + tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698; + tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218; + + /* CCFG */ + /* enable Timeout BusError */ + if (jmr3927_ccfg_toeon) + tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; + + /* clear BusErrorOnWrite flag */ + tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; + /* Disable PCI snoop */ + tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; + /* do reset on watchdog */ + tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; + +#ifdef DO_WRITE_THROUGH + /* Enable PCI SNOOP - with write through only */ + tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; +#endif + + /* Pin selection */ + tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL; + tx3927_ccfgptr->pcfg |= + TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL | + (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1)); + + printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", + tx3927_ccfgptr->crir, + tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); + + /* TMR */ + for (i = 0; i < TX3927_NR_TMR; i++) + txx9_tmr_init(TX3927_TMR_REG(i)); + + /* DMA */ + tx3927_dmaptr->mcr = 0; + for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { + /* reset channel */ + tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; + tx3927_dmaptr->ch[i].ccr = 0; + } + /* enable DMA */ +#ifdef __BIG_ENDIAN + tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; +#else + tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; +#endif + +#ifdef CONFIG_PCI + /* PCIC */ + printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:", + tx3927_pcicptr->did, tx3927_pcicptr->vid, + tx3927_pcicptr->rid); + if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) { + printk("External\n"); + /* XXX */ + } else { + printk("Internal\n"); + + /* Reset PCI Bus */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + udelay(100); + jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, + JMR3927_IOC_RESET_ADDR); + udelay(100); + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + + + /* Disable External PCI Config. Access */ + tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD; +#ifdef __BIG_ENDIAN + tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE | + TX3927_PCIC_LBC_TIBSE | + TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE; +#endif + /* LB->PCI mappings */ + tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1); + tx3927_pcicptr->ilbioma = mips_pci_io_base; + tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr; + tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1); + tx3927_pcicptr->ilbmma = mips_pci_mem_base; + tx3927_pcicptr->ipbmma = mips_pci_mem_base; + /* PCI->LB mappings */ + tx3927_pcicptr->iobas = 0xffffffff; + tx3927_pcicptr->ioba = 0; + tx3927_pcicptr->tlbioma = 0; + tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1); + tx3927_pcicptr->mba = 0; + tx3927_pcicptr->tlbmma = 0; + /* Enable Direct mapping Address Space Decoder */ + tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE; + + /* Clear All Local Bus Status */ + tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL; + /* Enable All Local Bus Interrupts */ + tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL; + /* Clear All PCI Status Error */ + tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL; + /* Enable All PCI Status Error Interrupts */ + tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL; + + /* PCIC Int => IRC IRQ10 */ + tx3927_pcicptr->il = TX3927_IR_PCI; + /* Target Control (per errata) */ + tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E; + + /* Enable Bus Arbiter */ + tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN; + + tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | + PCI_COMMAND_IO | + PCI_COMMAND_PARITY | PCI_COMMAND_SERR; + } +#endif /* CONFIG_PCI */ + + /* PIO */ + /* PIO[15:12] connected to LEDs */ + __raw_writel(0x0000f000, &tx3927_pioptr->dir); + __raw_writel(0, &tx3927_pioptr->maskcpu); + __raw_writel(0, &tx3927_pioptr->maskext); + txx9_gpio_init(TX3927_PIO_REG, 0, 16); + gpio_request(11, "dipsw1"); + gpio_request(10, "dipsw2"); + { + unsigned int conf; + + conf = read_c0_conf(); + if (!(conf & TX39_CONF_ICE)) + printk("TX3927 I-Cache disabled.\n"); + if (!(conf & TX39_CONF_DCE)) + printk("TX3927 D-Cache disabled.\n"); + else if (!(conf & TX39_CONF_WBON)) + printk("TX3927 D-Cache WriteThrough.\n"); + else if (!(conf & TX39_CONF_CWFON)) + printk("TX3927 D-Cache WriteBack.\n"); + else + printk("TX3927 D-Cache WriteBack (CWF) .\n"); + } +} + +/* This trick makes rtc-ds1742 driver usable as is. */ +unsigned long __swizzle_addr_b(unsigned long port) +{ + if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR) + return port; + port = (port & 0xffff0000) | (port & 0x7fff << 1); +#ifdef __BIG_ENDIAN + return port; +#else + return port | 1; +#endif +} +EXPORT_SYMBOL(__swizzle_addr_b); + +static int __init jmr3927_rtc_init(void) +{ + static struct resource __initdata res = { + .start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE, + .end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev; + dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} +device_initcall(jmr3927_rtc_init); + +/* Watchdog support */ + +static int __init txx9_wdt_init(unsigned long base) +{ + struct resource res = { + .start = base, + .end = base + 0x100 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev = + platform_device_register_simple("txx9wdt", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} + +static int __init jmr3927_wdt_init(void) +{ + return txx9_wdt_init(TX3927_TMR_REG(2)); +} +device_initcall(jmr3927_wdt_init); + +/* Minimum CLK support */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "imbus_clk")) + return (struct clk *)JMR3927_IMCLK; + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/txx9/rbtx4927/Makefile b/arch/mips/txx9/rbtx4927/Makefile new file mode 100644 index 000000000000..f3e1f597b4f1 --- /dev/null +++ b/arch/mips/txx9/rbtx4927/Makefile @@ -0,0 +1,3 @@ +obj-y += prom.o setup.o irq.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c new file mode 100644 index 000000000000..936e50e91d95 --- /dev/null +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -0,0 +1,214 @@ +/* + * Toshiba RBTX4927 specific interrupt handlers + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +/* +IRQ Device +00 RBTX4927-ISA/00 +01 RBTX4927-ISA/01 PS2/Keyboard +02 RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15) +03 RBTX4927-ISA/03 +04 RBTX4927-ISA/04 +05 RBTX4927-ISA/05 +06 RBTX4927-ISA/06 +07 RBTX4927-ISA/07 +08 RBTX4927-ISA/08 +09 RBTX4927-ISA/09 +10 RBTX4927-ISA/10 +11 RBTX4927-ISA/11 +12 RBTX4927-ISA/12 PS2/Mouse (not supported at this time) +13 RBTX4927-ISA/13 +14 RBTX4927-ISA/14 IDE +15 RBTX4927-ISA/15 + +16 TX4927-CP0/00 Software 0 +17 TX4927-CP0/01 Software 1 +18 TX4927-CP0/02 Cascade TX4927-CP0 +19 TX4927-CP0/03 Multiplexed -- do not use +20 TX4927-CP0/04 Multiplexed -- do not use +21 TX4927-CP0/05 Multiplexed -- do not use +22 TX4927-CP0/06 Multiplexed -- do not use +23 TX4927-CP0/07 CPU TIMER + +24 TX4927-PIC/00 +25 TX4927-PIC/01 +26 TX4927-PIC/02 +27 TX4927-PIC/03 Cascade RBTX4927-IOC +28 TX4927-PIC/04 +29 TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet +30 TX4927-PIC/06 +31 TX4927-PIC/07 +32 TX4927-PIC/08 TX4927 SerialIO Channel 0 +33 TX4927-PIC/09 TX4927 SerialIO Channel 1 +34 TX4927-PIC/10 +35 TX4927-PIC/11 +36 TX4927-PIC/12 +37 TX4927-PIC/13 +38 TX4927-PIC/14 +39 TX4927-PIC/15 +40 TX4927-PIC/16 TX4927 PCI PCI-C +41 TX4927-PIC/17 +42 TX4927-PIC/18 +43 TX4927-PIC/19 +44 TX4927-PIC/20 +45 TX4927-PIC/21 +46 TX4927-PIC/22 TX4927 PCI PCI-ERR +47 TX4927-PIC/23 TX4927 PCI PCI-PMA (not used) +48 TX4927-PIC/24 +49 TX4927-PIC/25 +50 TX4927-PIC/26 +51 TX4927-PIC/27 +52 TX4927-PIC/28 +53 TX4927-PIC/29 +54 TX4927-PIC/30 +55 TX4927-PIC/31 + +56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed) [RTL-8139=PJ4] +57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed) [RTL-8139=PJ5] +58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported] +59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4) [RTL-8139=PJ6] +60 RBTX4927-IOC/04 +61 RBTX4927-IOC/05 +62 RBTX4927-IOC/06 +63 RBTX4927-IOC/07 + +NOTES: +SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58 +SouthBridge/ISA/pin=0 no pci irq used by this device +SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14 +SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59 +SouthBridge/PMC/pin=0 no pci irq used by this device +SuperIO/PS2/Keyboard, using INTR via ISA IRQ1 +SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported) +JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6 +*/ + +#include +#include +#include +#include +#ifdef CONFIG_TOSHIBA_FPCIB0 +#include +#endif +#include + +#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG 0 +#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_END 7 + +#define TOSHIBA_RBTX4927_IRQ_IOC_BEG ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG) /* 56 */ +#define TOSHIBA_RBTX4927_IRQ_IOC_END ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_END) /* 63 */ + +#define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC +#define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2) + +extern int tx4927_using_backplane; + +static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq); +static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq); + +#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC" +static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { + .name = TOSHIBA_RBTX4927_IOC_NAME, + .ack = toshiba_rbtx4927_irq_ioc_disable, + .mask = toshiba_rbtx4927_irq_ioc_disable, + .mask_ack = toshiba_rbtx4927_irq_ioc_disable, + .unmask = toshiba_rbtx4927_irq_ioc_enable, +}; +#define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL +#define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL + +int toshiba_rbtx4927_irq_nested(int sw_irq) +{ + u8 level3; + + level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f; + if (level3) { + sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + fls(level3) - 1; +#ifdef CONFIG_TOSHIBA_FPCIB0 + if (sw_irq == TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC && + tx4927_using_backplane) { + int irq = i8259_irq(); + if (irq >= 0) + sw_irq = irq; + } +#endif + } + return (sw_irq); +} + +static struct irqaction toshiba_rbtx4927_irq_ioc_action = { + .handler = no_action, + .flags = IRQF_SHARED, + .mask = CPU_MASK_NONE, + .name = TOSHIBA_RBTX4927_IOC_NAME +}; + +static void __init toshiba_rbtx4927_irq_ioc_init(void) +{ + int i; + + for (i = TOSHIBA_RBTX4927_IRQ_IOC_BEG; + i <= TOSHIBA_RBTX4927_IRQ_IOC_END; i++) + set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type, + handle_level_irq); + + setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC, + &toshiba_rbtx4927_irq_ioc_action); +} + +static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq) +{ + unsigned char v; + + v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); + v |= (1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); + writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); +} + +static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq) +{ + unsigned char v; + + v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); + v &= ~(1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); + writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); + mmiowb(); +} + +void __init arch_init_irq(void) +{ + extern void tx4927_irq_init(void); + + tx4927_irq_init(); + toshiba_rbtx4927_irq_ioc_init(); +#ifdef CONFIG_TOSHIBA_FPCIB0 + if (tx4927_using_backplane) + init_i8259_irqs(); +#endif + /* Onboard 10M Ether: High Active */ + set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH); +} diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c new file mode 100644 index 000000000000..0020bbee838b --- /dev/null +++ b/arch/mips/txx9/rbtx4927/prom.c @@ -0,0 +1,91 @@ +/* + * rbtx4927 specific prom routines + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * Copyright (C) 2004 MontaVista Software Inc. + * Author: Manish Lachwani, mlachwani@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include + +void __init prom_init_cmdline(void) +{ + int argc = (int) fw_arg0; + char **argv = (char **) fw_arg1; + int i; /* Always ignore the "-c" at argv[0] */ + + /* ignore all built-in args if any f/w args given */ + if (argc > 1) { + *arcs_cmdline = '\0'; + } + + for (i = 1; i < argc; i++) { + if (i != 1) { + strcat(arcs_cmdline, " "); + } + strcat(arcs_cmdline, argv[i]); + } +} + +void __init prom_init(void) +{ + extern int tx4927_get_mem_size(void); + extern char* toshiba_name; + int msize; + + prom_init_cmdline(); + + if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) { + mips_machtype = MACH_TOSHIBA_RBTX4927; + toshiba_name = "TX4927"; + } else { + mips_machtype = MACH_TOSHIBA_RBTX4937; + toshiba_name = "TX4937"; + } + + msize = tx4927_get_mem_size(); + add_memory_region(0, msize << 20, BOOT_MEM_RAM); +} + +void __init prom_free_prom_memory(void) +{ +} + +const char *get_system_type(void) +{ + return "Toshiba RBTX4927/RBTX4937"; +} + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c new file mode 100644 index 000000000000..df1b6e99b666 --- /dev/null +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -0,0 +1,703 @@ +/* + * Toshiba rbtx4927 specific setup + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2000 RidgeRun, Inc. + * Author: RidgeRun, Inc. + * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com + * + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * Copyright 2002 MontaVista Software Inc. + * Author: Michael Pruznick, michael_pruznick@mvista.com + * + * Copyright (C) 2000-2001 Toshiba Corporation + * + * Copyright (C) 2004 MontaVista Software Inc. + * Author: Manish Lachwani, mlachwani@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_TOSHIBA_FPCIB0 +#include +#endif +#include +#ifdef CONFIG_SERIAL_TXX9 +#include +#endif + +/* These functions are used for rebooting or halting the machine*/ +extern void toshiba_rbtx4927_restart(char *command); +extern void toshiba_rbtx4927_halt(void); +extern void toshiba_rbtx4927_power_off(void); + +int tx4927_using_backplane = 0; + +extern void toshiba_rbtx4927_irq_setup(void); + +char *prom_getcmdline(void); + +#ifdef CONFIG_PCI +#undef TX4927_SUPPORT_COMMAND_IO +#undef TX4927_SUPPORT_PCI_66 +int tx4927_cpu_clock = 100000000; /* 100MHz */ +unsigned long mips_pci_io_base; +unsigned long mips_pci_io_size; +unsigned long mips_pci_mem_base; +unsigned long mips_pci_mem_size; +/* for legacy I/O, PCI I/O PCI Bus address must be 0 */ +unsigned long mips_pci_io_pciaddr = 0; +unsigned long mips_memory_upper; +static int tx4927_ccfg_toeon = 1; +static int tx4927_pcic_trdyto = 0; /* default: disabled */ +unsigned long tx4927_ce_base[8]; +int tx4927_pci66 = 0; /* 0:auto */ +#endif + +char *toshiba_name = ""; + +#ifdef CONFIG_PCI +extern struct pci_controller tx4927_controller; + +static struct pci_dev *fake_pci_dev(struct pci_controller *hose, + int top_bus, int busnr, int devfn) +{ + static struct pci_dev dev; + static struct pci_bus bus; + + dev.sysdata = (void *)hose; + dev.devfn = devfn; + bus.number = busnr; + bus.ops = hose->pci_ops; + bus.parent = NULL; + dev.bus = &bus; + + return &dev; +} + +#define EARLY_PCI_OP(rw, size, type) \ +static int early_##rw##_config_##size(struct pci_controller *hose, \ + int top_bus, int bus, int devfn, int offset, type value) \ +{ \ + return pci_##rw##_config_##size( \ + fake_pci_dev(hose, top_bus, bus, devfn), \ + offset, value); \ +} + +EARLY_PCI_OP(read, byte, u8 *) +EARLY_PCI_OP(read, dword, u32 *) +EARLY_PCI_OP(write, byte, u8) +EARLY_PCI_OP(write, dword, u32) + +static int __init tx4927_pcibios_init(void) +{ + unsigned int id; + u32 pci_devfn; + int devfn_start = 0; + int devfn_stop = 0xff; + int busno = 0; /* One bus on the Toshiba */ + struct pci_controller *hose = &tx4927_controller; + + for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) { + early_read_config_dword(hose, busno, busno, pci_devfn, + PCI_VENDOR_ID, &id); + + if (id == 0xffffffff) { + continue; + } + + if (id == 0x94601055) { + u8 v08_64; + u32 v32_b0; + u8 v08_e1; + + early_read_config_byte(hose, busno, busno, + pci_devfn, 0x64, &v08_64); + early_read_config_dword(hose, busno, busno, + pci_devfn, 0xb0, &v32_b0); + early_read_config_byte(hose, busno, busno, + pci_devfn, 0xe1, &v08_e1); + + /* serial irq control */ + v08_64 = 0xd0; + + /* serial irq pin */ + v32_b0 |= 0x00010000; + + /* ide irq on isa14 */ + v08_e1 &= 0xf0; + v08_e1 |= 0x0d; + + early_write_config_byte(hose, busno, busno, + pci_devfn, 0x64, v08_64); + early_write_config_dword(hose, busno, busno, + pci_devfn, 0xb0, v32_b0); + early_write_config_byte(hose, busno, busno, + pci_devfn, 0xe1, v08_e1); + } + + if (id == 0x91301055) { + u8 v08_04; + u8 v08_09; + u8 v08_41; + u8 v08_43; + u8 v08_5c; + + early_read_config_byte(hose, busno, busno, + pci_devfn, 0x04, &v08_04); + early_read_config_byte(hose, busno, busno, + pci_devfn, 0x09, &v08_09); + early_read_config_byte(hose, busno, busno, + pci_devfn, 0x41, &v08_41); + early_read_config_byte(hose, busno, busno, + pci_devfn, 0x43, &v08_43); + early_read_config_byte(hose, busno, busno, + pci_devfn, 0x5c, &v08_5c); + + /* enable ide master/io */ + v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO); + + /* enable ide native mode */ + v08_09 |= 0x05; + + /* enable primary ide */ + v08_41 |= 0x80; + + /* enable secondary ide */ + v08_43 |= 0x80; + + /* + * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! + * + * This line of code is intended to provide the user with a work + * around solution to the anomalies cited in SMSC's anomaly sheet + * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"". + * + * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! + */ + v08_5c |= 0x01; + + early_write_config_byte(hose, busno, busno, + pci_devfn, 0x5c, v08_5c); + early_write_config_byte(hose, busno, busno, + pci_devfn, 0x04, v08_04); + early_write_config_byte(hose, busno, busno, + pci_devfn, 0x09, v08_09); + early_write_config_byte(hose, busno, busno, + pci_devfn, 0x41, v08_41); + early_write_config_byte(hose, busno, busno, + pci_devfn, 0x43, v08_43); + } + + } + + register_pci_controller(&tx4927_controller); + return 0; +} + +arch_initcall(tx4927_pcibios_init); + +extern struct resource pci_io_resource; +extern struct resource pci_mem_resource; + +void __init tx4927_pci_setup(void) +{ + static int called = 0; + extern unsigned int tx4927_get_mem_size(void); + + mips_memory_upper = tx4927_get_mem_size() << 20; + mips_memory_upper += KSEG0; + mips_pci_io_base = TX4927_PCIIO; + mips_pci_io_size = TX4927_PCIIO_SIZE; + mips_pci_mem_base = TX4927_PCIMEM; + mips_pci_mem_size = TX4927_PCIMEM_SIZE; + + if (!called) { + printk + ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", + toshiba_name, + (unsigned short) (tx4927_pcicptr->pciid >> 16), + (unsigned short) (tx4927_pcicptr->pciid & 0xffff), + (unsigned short) (tx4927_pcicptr->pciccrev & 0xff), + (!(tx4927_ccfgptr-> + ccfg & TX4927_CCFG_PCIXARB)) ? "External" : + "Internal"); + called = 1; + } + printk("%s PCIC --%s PCICLK:", toshiba_name, + (tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : ""); + if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) { + int pciclk = 0; + if (mips_machtype == MACH_TOSHIBA_RBTX4937) + switch ((unsigned long) tx4927_ccfgptr-> + ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { + case TX4937_CCFG_PCIDIVMODE_4: + pciclk = tx4927_cpu_clock / 4; + break; + case TX4937_CCFG_PCIDIVMODE_4_5: + pciclk = tx4927_cpu_clock * 2 / 9; + break; + case TX4937_CCFG_PCIDIVMODE_5: + pciclk = tx4927_cpu_clock / 5; + break; + case TX4937_CCFG_PCIDIVMODE_5_5: + pciclk = tx4927_cpu_clock * 2 / 11; + break; + case TX4937_CCFG_PCIDIVMODE_8: + pciclk = tx4927_cpu_clock / 8; + break; + case TX4937_CCFG_PCIDIVMODE_9: + pciclk = tx4927_cpu_clock / 9; + break; + case TX4937_CCFG_PCIDIVMODE_10: + pciclk = tx4927_cpu_clock / 10; + break; + case TX4937_CCFG_PCIDIVMODE_11: + pciclk = tx4927_cpu_clock / 11; + break; + } + + else + switch ((unsigned long) tx4927_ccfgptr-> + ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { + case TX4927_CCFG_PCIDIVMODE_2_5: + pciclk = tx4927_cpu_clock * 2 / 5; + break; + case TX4927_CCFG_PCIDIVMODE_3: + pciclk = tx4927_cpu_clock / 3; + break; + case TX4927_CCFG_PCIDIVMODE_5: + pciclk = tx4927_cpu_clock / 5; + break; + case TX4927_CCFG_PCIDIVMODE_6: + pciclk = tx4927_cpu_clock / 6; + break; + } + + printk("Internal(%dMHz)", pciclk / 1000000); + } else + printk("External"); + printk("\n"); + + /* GB->PCI mappings */ + tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4; + tx4927_pcicptr->g2piogbase = mips_pci_io_base | +#ifdef __BIG_ENDIAN + TX4927_PCIC_G2PIOGBASE_ECHG +#else + TX4927_PCIC_G2PIOGBASE_BSDIS +#endif + ; + + tx4927_pcicptr->g2piopbase = 0; + + tx4927_pcicptr->g2pmmask[0] = (mips_pci_mem_size - 1) >> 4; + tx4927_pcicptr->g2pmgbase[0] = mips_pci_mem_base | +#ifdef __BIG_ENDIAN + TX4927_PCIC_G2PMnGBASE_ECHG +#else + TX4927_PCIC_G2PMnGBASE_BSDIS +#endif + ; + tx4927_pcicptr->g2pmpbase[0] = mips_pci_mem_base; + + tx4927_pcicptr->g2pmmask[1] = 0; + tx4927_pcicptr->g2pmgbase[1] = 0; + tx4927_pcicptr->g2pmpbase[1] = 0; + tx4927_pcicptr->g2pmmask[2] = 0; + tx4927_pcicptr->g2pmgbase[2] = 0; + tx4927_pcicptr->g2pmpbase[2] = 0; + + + /* PCI->GB mappings (I/O 256B) */ + tx4927_pcicptr->p2giopbase = 0; /* 256B */ + + /* PCI->GB mappings (MEM 512MB) M0 gets all of memory */ + tx4927_pcicptr->p2gm0plbase = 0; + tx4927_pcicptr->p2gm0pubase = 0; + tx4927_pcicptr->p2gmgbase[0] = 0 | TX4927_PCIC_P2GMnGBASE_TMEMEN | +#ifdef __BIG_ENDIAN + TX4927_PCIC_P2GMnGBASE_TECHG +#else + TX4927_PCIC_P2GMnGBASE_TBSDIS +#endif + ; + + /* PCI->GB mappings (MEM 16MB) -not used */ + tx4927_pcicptr->p2gm1plbase = 0xffffffff; + tx4927_pcicptr->p2gm1pubase = 0xffffffff; + tx4927_pcicptr->p2gmgbase[1] = 0; + + /* PCI->GB mappings (MEM 1MB) -not used */ + tx4927_pcicptr->p2gm2pbase = 0xffffffff; + tx4927_pcicptr->p2gmgbase[2] = 0; + + + /* Enable Initiator Memory 0 Space, I/O Space, Config */ + tx4927_pcicptr->pciccfg &= TX4927_PCIC_PCICCFG_LBWC_MASK; + tx4927_pcicptr->pciccfg |= + TX4927_PCIC_PCICCFG_IMSE0 | TX4927_PCIC_PCICCFG_IISE | + TX4927_PCIC_PCICCFG_ICAE | TX4927_PCIC_PCICCFG_ATR; + + + /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ + tx4927_pcicptr->pcicfg1 = 0; + + if (tx4927_pcic_trdyto >= 0) { + tx4927_pcicptr->g2ptocnt &= ~0xff; + tx4927_pcicptr->g2ptocnt |= (tx4927_pcic_trdyto & 0xff); + } + + /* Clear All Local Bus Status */ + tx4927_pcicptr->pcicstatus = TX4927_PCIC_PCICSTATUS_ALL; + /* Enable All Local Bus Interrupts */ + tx4927_pcicptr->pcicmask = TX4927_PCIC_PCICSTATUS_ALL; + /* Clear All Initiator Status */ + tx4927_pcicptr->g2pstatus = TX4927_PCIC_G2PSTATUS_ALL; + /* Enable All Initiator Interrupts */ + tx4927_pcicptr->g2pmask = TX4927_PCIC_G2PSTATUS_ALL; + /* Clear All PCI Status Error */ + tx4927_pcicptr->pcistatus = + (tx4927_pcicptr->pcistatus & 0x0000ffff) | + (TX4927_PCIC_PCISTATUS_ALL << 16); + /* Enable All PCI Status Error Interrupts */ + tx4927_pcicptr->pcimask = TX4927_PCIC_PCISTATUS_ALL; + + /* PCIC Int => IRC IRQ16 */ + tx4927_pcicptr->pcicfg2 = + (tx4927_pcicptr->pcicfg2 & 0xffffff00) | TX4927_IR_PCIC; + + if (!(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCIXARB)) { + /* XXX */ + } else { + /* Reset Bus Arbiter */ + tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_RPBA; + /* Enable Bus Arbiter */ + tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_PBAEN; + } + + tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | + PCI_COMMAND_PARITY | PCI_COMMAND_SERR; +} +#endif /* CONFIG_PCI */ + +static void __noreturn wait_forever(void) +{ + while (1) + if (cpu_wait) + (*cpu_wait)(); +} + +void toshiba_rbtx4927_restart(char *command) +{ + printk(KERN_NOTICE "System Rebooting...\n"); + + /* enable the s/w reset register */ + writeb(RBTX4927_SW_RESET_ENABLE_SET, RBTX4927_SW_RESET_ENABLE); + + /* wait for enable to be seen */ + while ((readb(RBTX4927_SW_RESET_ENABLE) & + RBTX4927_SW_RESET_ENABLE_SET) == 0x00); + + /* do a s/w reset */ + writeb(RBTX4927_SW_RESET_DO_SET, RBTX4927_SW_RESET_DO); + + /* do something passive while waiting for reset */ + local_irq_disable(); + wait_forever(); + /* no return */ +} + +void toshiba_rbtx4927_halt(void) +{ + printk(KERN_NOTICE "System Halted\n"); + local_irq_disable(); + wait_forever(); + /* no return */ +} + +void toshiba_rbtx4927_power_off(void) +{ + toshiba_rbtx4927_halt(); + /* no return */ +} + +void __init plat_mem_setup(void) +{ + int i; + u32 cp0_config; + char *argptr; + + printk("CPU is %s\n", toshiba_name); + + /* f/w leaves this on at startup */ + clear_c0_status(ST0_ERL); + + /* enable caches -- HCP5 does this, pmon does not */ + cp0_config = read_c0_config(); + cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); + write_c0_config(cp0_config); + + set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET); + + ioport_resource.end = 0xffffffff; + iomem_resource.end = 0xffffffff; + + _machine_restart = toshiba_rbtx4927_restart; + _machine_halt = toshiba_rbtx4927_halt; + pm_power_off = toshiba_rbtx4927_power_off; + + for (i = 0; i < TX4927_NR_TMR; i++) + txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL); + +#ifdef CONFIG_PCI + + /* PCIC */ + /* + * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. + * + * For TX4927: + * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1). + * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5) + * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3) + * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) + * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) + * i.e. S9[3]: ON (83MHz), OFF (100MHz) + * + * For TX4937: + * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) + * PCIDIVMODE[10] is 0. + * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8) + * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4) + * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9) + * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5) + * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) + * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) + * + */ + if (mips_machtype == MACH_TOSHIBA_RBTX4937) + switch ((unsigned long)tx4927_ccfgptr-> + ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { + case TX4937_CCFG_PCIDIVMODE_8: + case TX4937_CCFG_PCIDIVMODE_4: + tx4927_cpu_clock = 266666666; /* 266MHz */ + break; + case TX4937_CCFG_PCIDIVMODE_9: + case TX4937_CCFG_PCIDIVMODE_4_5: + tx4927_cpu_clock = 300000000; /* 300MHz */ + break; + default: + tx4927_cpu_clock = 333333333; /* 333MHz */ + } + else + switch ((unsigned long)tx4927_ccfgptr-> + ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { + case TX4927_CCFG_PCIDIVMODE_2_5: + case TX4927_CCFG_PCIDIVMODE_5: + tx4927_cpu_clock = 166666666; /* 166MHz */ + break; + default: + tx4927_cpu_clock = 200000000; /* 200MHz */ + } + + /* CCFG */ + /* do reset on watchdog */ + tx4927_ccfgptr->ccfg |= TX4927_CCFG_WR; + /* enable Timeout BusError */ + if (tx4927_ccfg_toeon) + tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE; + + tx4927_pci_setup(); + if (tx4927_using_backplane == 1) + printk("backplane board IS installed\n"); + else + printk("No Backplane \n"); + + /* this is on ISA bus behind PCI bus, so need PCI up first */ +#ifdef CONFIG_TOSHIBA_FPCIB0 + if (tx4927_using_backplane) { + smsc_fdc37m81x_init(0x3f0); + smsc_fdc37m81x_config_beg(); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, + SMSC_FDC37M81X_KBD); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, + 1); + smsc_fdc37m81x_config_end(); + } +#endif +#endif /* CONFIG_PCI */ + +#ifdef CONFIG_SERIAL_TXX9 + { + extern int early_serial_txx9_setup(struct uart_port *port); + struct uart_port req; + for(i = 0; i < 2; i++) { + memset(&req, 0, sizeof(req)); + req.line = i; + req.iotype = UPIO_MEM; + req.membase = (char *)(0xff1ff300 + i * 0x100); + req.mapbase = 0xff1ff300 + i * 0x100; + req.irq = TX4927_IRQ_PIC_BEG + 8 + i; + req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; + req.uartclk = 50000000; + early_serial_txx9_setup(&req); + } + } +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + argptr = prom_getcmdline(); + if (strstr(argptr, "console=") == NULL) { + strcat(argptr, " console=ttyS0,38400"); + } +#endif +#endif + +#ifdef CONFIG_ROOT_NFS + argptr = prom_getcmdline(); + if (strstr(argptr, "root=") == NULL) { + strcat(argptr, " root=/dev/nfs rw"); + } +#endif + +#ifdef CONFIG_IP_PNP + argptr = prom_getcmdline(); + if (strstr(argptr, "ip=") == NULL) { + strcat(argptr, " ip=any"); + } +#endif +} + +void __init plat_time_init(void) +{ + mips_hpt_frequency = tx4927_cpu_clock / 2; + if (tx4927_ccfgptr->ccfg & TX4927_CCFG_TINTDIS) + txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL, + TXX9_IRQ_BASE + 17, + 50000000); +} + +static int __init toshiba_rbtx4927_rtc_init(void) +{ + static struct resource __initdata res = { + .start = 0x1c010000, + .end = 0x1c010000 + 0x800 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev = + platform_device_register_simple("rtc-ds1742", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} +device_initcall(toshiba_rbtx4927_rtc_init); + +static int __init rbtx4927_ne_init(void) +{ + static struct resource __initdata res[] = { + { + .start = RBTX4927_RTL_8019_BASE, + .end = RBTX4927_RTL_8019_BASE + 0x20 - 1, + .flags = IORESOURCE_IO, + }, { + .start = RBTX4927_RTL_8019_IRQ, + .flags = IORESOURCE_IRQ, + } + }; + struct platform_device *dev = + platform_device_register_simple("ne", -1, + res, ARRAY_SIZE(res)); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} +device_initcall(rbtx4927_ne_init); + +/* Watchdog support */ + +static int __init txx9_wdt_init(unsigned long base) +{ + struct resource res = { + .start = base, + .end = base + 0x100 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev = + platform_device_register_simple("txx9wdt", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} + +static int __init rbtx4927_wdt_init(void) +{ + return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); +} +device_initcall(rbtx4927_wdt_init); + +/* Minimum CLK support */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "imbus_clk")) + return (struct clk *)50000000; + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/txx9/rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile new file mode 100644 index 000000000000..9dcc52ae5b9d --- /dev/null +++ b/arch/mips/txx9/rbtx4938/Makefile @@ -0,0 +1,3 @@ +obj-y += prom.o setup.o irq.o spi_eeprom.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c new file mode 100644 index 000000000000..f4984820251a --- /dev/null +++ b/arch/mips/txx9/rbtx4938/irq.c @@ -0,0 +1,159 @@ +/* + * Toshiba RBTX4938 specific interrupt handlers + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ + +/* +IRQ Device + +16 TX4938-CP0/00 Software 0 +17 TX4938-CP0/01 Software 1 +18 TX4938-CP0/02 Cascade TX4938-CP0 +19 TX4938-CP0/03 Multiplexed -- do not use +20 TX4938-CP0/04 Multiplexed -- do not use +21 TX4938-CP0/05 Multiplexed -- do not use +22 TX4938-CP0/06 Multiplexed -- do not use +23 TX4938-CP0/07 CPU TIMER + +24 TX4938-PIC/00 +25 TX4938-PIC/01 +26 TX4938-PIC/02 Cascade RBTX4938-IOC +27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet +28 TX4938-PIC/04 +29 TX4938-PIC/05 TX4938 ETH1 +30 TX4938-PIC/06 TX4938 ETH0 +31 TX4938-PIC/07 +32 TX4938-PIC/08 TX4938 SIO 0 +33 TX4938-PIC/09 TX4938 SIO 1 +34 TX4938-PIC/10 TX4938 DMA0 +35 TX4938-PIC/11 TX4938 DMA1 +36 TX4938-PIC/12 TX4938 DMA2 +37 TX4938-PIC/13 TX4938 DMA3 +38 TX4938-PIC/14 +39 TX4938-PIC/15 +40 TX4938-PIC/16 TX4938 PCIC +41 TX4938-PIC/17 TX4938 TMR0 +42 TX4938-PIC/18 TX4938 TMR1 +43 TX4938-PIC/19 TX4938 TMR2 +44 TX4938-PIC/20 +45 TX4938-PIC/21 +46 TX4938-PIC/22 TX4938 PCIERR +47 TX4938-PIC/23 +48 TX4938-PIC/24 +49 TX4938-PIC/25 +50 TX4938-PIC/26 +51 TX4938-PIC/27 +52 TX4938-PIC/28 +53 TX4938-PIC/29 +54 TX4938-PIC/30 +55 TX4938-PIC/31 TX4938 SPI + +56 RBTX4938-IOC/00 PCI-D +57 RBTX4938-IOC/01 PCI-C +58 RBTX4938-IOC/02 PCI-B +59 RBTX4938-IOC/03 PCI-A +60 RBTX4938-IOC/04 RTC +61 RBTX4938-IOC/05 ATA +62 RBTX4938-IOC/06 MODEM +63 RBTX4938-IOC/07 SWINT +*/ +#include +#include +#include + +static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq); +static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq); + +#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC" +static struct irq_chip toshiba_rbtx4938_irq_ioc_type = { + .name = TOSHIBA_RBTX4938_IOC_NAME, + .ack = toshiba_rbtx4938_irq_ioc_disable, + .mask = toshiba_rbtx4938_irq_ioc_disable, + .mask_ack = toshiba_rbtx4938_irq_ioc_disable, + .unmask = toshiba_rbtx4938_irq_ioc_enable, +}; + +int +toshiba_rbtx4938_irq_nested(int sw_irq) +{ + u8 level3; + + level3 = readb(rbtx4938_imstat_addr); + if (level3) + /* must use fls so onboard ATA has priority */ + sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1; + + return sw_irq; +} + +static struct irqaction toshiba_rbtx4938_irq_ioc_action = { + .handler = no_action, + .flags = 0, + .mask = CPU_MASK_NONE, + .name = TOSHIBA_RBTX4938_IOC_NAME, +}; + +/**********************************************************************************/ +/* Functions for ioc */ +/**********************************************************************************/ +static void __init +toshiba_rbtx4938_irq_ioc_init(void) +{ + int i; + + for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG; + i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++) + set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type, + handle_level_irq); + + setup_irq(RBTX4938_IRQ_IOCINT, + &toshiba_rbtx4938_irq_ioc_action); +} + +static void +toshiba_rbtx4938_irq_ioc_enable(unsigned int irq) +{ + unsigned char v; + + v = readb(rbtx4938_imask_addr); + v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); + writeb(v, rbtx4938_imask_addr); + mmiowb(); +} + +static void +toshiba_rbtx4938_irq_ioc_disable(unsigned int irq) +{ + unsigned char v; + + v = readb(rbtx4938_imask_addr); + v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); + writeb(v, rbtx4938_imask_addr); + mmiowb(); +} + +void __init arch_init_irq(void) +{ + extern void tx4938_irq_init(void); + + /* Now, interrupt control disabled, */ + /* all IRC interrupts are masked, */ + /* all IRC interrupt mode are Low Active. */ + + /* mask all IOC interrupts */ + writeb(0, rbtx4938_imask_addr); + + /* clear SoftInt interrupts */ + writeb(0, rbtx4938_softint_addr); + tx4938_irq_init(); + toshiba_rbtx4938_irq_ioc_init(); + /* Onboard 10M Ether: High Active */ + set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH); +} diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c new file mode 100644 index 000000000000..134fcc2dc7d2 --- /dev/null +++ b/arch/mips/txx9/rbtx4938/prom.c @@ -0,0 +1,72 @@ +/* + * rbtx4938 specific prom routines + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ + +#include +#include +#include +#include + +#include +#include +#include + +void __init prom_init_cmdline(void) +{ + int argc = (int) fw_arg0; + char **argv = (char **) fw_arg1; + int i; + + /* ignore all built-in args if any f/w args given */ + if (argc > 1) { + *arcs_cmdline = '\0'; + } + + for (i = 1; i < argc; i++) { + if (i != 1) { + strcat(arcs_cmdline, " "); + } + strcat(arcs_cmdline, argv[i]); + } +} + +void __init prom_init(void) +{ + extern int tx4938_get_mem_size(void); + int msize; +#ifndef CONFIG_TX4938_NAND_BOOT + prom_init_cmdline(); +#endif + + msize = tx4938_get_mem_size(); + add_memory_region(0, msize << 20, BOOT_MEM_RAM); + + return; +} + +void __init prom_free_prom_memory(void) +{ +} + +void __init prom_fixup_mem_map(unsigned long start, unsigned long end) +{ + return; +} + +const char *get_system_type(void) +{ + return "Toshiba RBTX4938"; +} + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c new file mode 100644 index 000000000000..bbd572c9675b --- /dev/null +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -0,0 +1,1122 @@ +/* + * Setup pointers to hardware-dependent routines. + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SERIAL_TXX9 +#include +#endif +#include +#include +#include + +extern char * __init prom_getcmdline(void); +static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr); + +/* These functions are used for rebooting or halting the machine*/ +extern void rbtx4938_machine_restart(char *command); +extern void rbtx4938_machine_halt(void); +extern void rbtx4938_machine_power_off(void); + +/* clocks */ +unsigned int txx9_master_clock; +unsigned int txx9_cpu_clock; +unsigned int txx9_gbus_clock; + +unsigned long rbtx4938_ce_base[8]; +unsigned long rbtx4938_ce_size[8]; +int txboard_pci66_mode; +static int tx4938_pcic_trdyto; /* default: disabled */ +static int tx4938_pcic_retryto; /* default: disabled */ +static int tx4938_ccfg_toeon = 1; + +struct tx4938_pcic_reg *pcicptrs[4] = { + tx4938_pcicptr /* default setting for TX4938 */ +}; + +static struct { + unsigned long base; + unsigned long size; +} phys_regions[16] __initdata; +static int num_phys_regions __initdata; + +#define PHYS_REGION_MINSIZE 0x10000 + +void rbtx4938_machine_halt(void) +{ + printk(KERN_NOTICE "System Halted\n"); + local_irq_disable(); + + while (1) + __asm__(".set\tmips3\n\t" + "wait\n\t" + ".set\tmips0"); +} + +void rbtx4938_machine_power_off(void) +{ + rbtx4938_machine_halt(); + /* no return */ +} + +void rbtx4938_machine_restart(char *command) +{ + local_irq_disable(); + + printk("Rebooting..."); + writeb(1, rbtx4938_softresetlock_addr); + writeb(1, rbtx4938_sfvol_addr); + writeb(1, rbtx4938_softreset_addr); + while(1) + ; +} + +void __init +txboard_add_phys_region(unsigned long base, unsigned long size) +{ + if (num_phys_regions >= ARRAY_SIZE(phys_regions)) { + printk("phys_region overflow\n"); + return; + } + phys_regions[num_phys_regions].base = base; + phys_regions[num_phys_regions].size = size; + num_phys_regions++; +} +unsigned long __init +txboard_find_free_phys_region(unsigned long begin, unsigned long end, + unsigned long size) +{ + unsigned long base; + int i; + + for (base = begin / size * size; base < end; base += size) { + for (i = 0; i < num_phys_regions; i++) { + if (phys_regions[i].size && + base <= phys_regions[i].base + (phys_regions[i].size - 1) && + base + (size - 1) >= phys_regions[i].base) + break; + } + if (i == num_phys_regions) + return base; + } + return 0; +} +unsigned long __init +txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end, + unsigned long *size) +{ + unsigned long sz, base; + for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) { + base = txboard_find_free_phys_region(begin, end, sz); + if (base) { + *size = sz; + return base; + } + } + return 0; +} +unsigned long __init +txboard_request_phys_region_range(unsigned long begin, unsigned long end, + unsigned long size) +{ + unsigned long base; + base = txboard_find_free_phys_region(begin, end, size); + if (base) + txboard_add_phys_region(base, size); + return base; +} +unsigned long __init +txboard_request_phys_region(unsigned long size) +{ + unsigned long base; + unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ + base = txboard_find_free_phys_region(begin, end, size); + if (base) + txboard_add_phys_region(base, size); + return base; +} +unsigned long __init +txboard_request_phys_region_shrink(unsigned long *size) +{ + unsigned long base; + unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ + base = txboard_find_free_phys_region_shrink(begin, end, size); + if (base) + txboard_add_phys_region(base, *size); + return base; +} + +#ifdef CONFIG_PCI +void __init +tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr, + struct pci_controller *channel, + unsigned long pci_io_base, + int extarb) +{ + int i; + + /* Disable All Initiator Space */ + pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)| + TX4938_PCIC_PCICCFG_G2PMEN(1)| + TX4938_PCIC_PCICCFG_G2PMEN(2)| + TX4938_PCIC_PCICCFG_G2PIOEN); + + /* GB->PCI mappings */ + pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4; + pcicptr->g2piogbase = pci_io_base | +#ifdef __BIG_ENDIAN + TX4938_PCIC_G2PIOGBASE_ECHG +#else + TX4938_PCIC_G2PIOGBASE_BSDIS +#endif + ; + pcicptr->g2piopbase = 0; + for (i = 0; i < 3; i++) { + pcicptr->g2pmmask[i] = 0; + pcicptr->g2pmgbase[i] = 0; + pcicptr->g2pmpbase[i] = 0; + } + if (channel->mem_resource->end) { + pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4; + pcicptr->g2pmgbase[0] = channel->mem_resource->start | +#ifdef __BIG_ENDIAN + TX4938_PCIC_G2PMnGBASE_ECHG +#else + TX4938_PCIC_G2PMnGBASE_BSDIS +#endif + ; + pcicptr->g2pmpbase[0] = channel->mem_resource->start; + } + /* PCI->GB mappings (I/O 256B) */ + pcicptr->p2giopbase = 0; /* 256B */ + pcicptr->p2giogbase = 0; + /* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */ + pcicptr->p2gm0plbase = 0; + pcicptr->p2gm0pubase = 0; + pcicptr->p2gmgbase[0] = 0 | + TX4938_PCIC_P2GMnGBASE_TMEMEN | +#ifdef __BIG_ENDIAN + TX4938_PCIC_P2GMnGBASE_TECHG +#else + TX4938_PCIC_P2GMnGBASE_TBSDIS +#endif + ; + /* PCI->GB mappings (MEM 16MB) */ + pcicptr->p2gm1plbase = 0xffffffff; + pcicptr->p2gm1pubase = 0xffffffff; + pcicptr->p2gmgbase[1] = 0; + /* PCI->GB mappings (MEM 1MB) */ + pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */ + pcicptr->p2gmgbase[2] = 0; + + pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK; + /* Enable Initiator Memory Space */ + if (channel->mem_resource->end) + pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0); + /* Enable Initiator I/O Space */ + if (channel->io_resource->end) + pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN; + /* Enable Initiator Config */ + pcicptr->pciccfg |= + TX4938_PCIC_PCICCFG_ICAEN | + TX4938_PCIC_PCICCFG_TCAR; + + /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ + pcicptr->pcicfg1 = 0; + + pcicptr->g2ptocnt &= ~0xffff; + + if (tx4938_pcic_trdyto >= 0) { + pcicptr->g2ptocnt &= ~0xff; + pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff); + } + + if (tx4938_pcic_retryto >= 0) { + pcicptr->g2ptocnt &= ~0xff00; + pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00); + } + + /* Clear All Local Bus Status */ + pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL; + /* Enable All Local Bus Interrupts */ + pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL; + /* Clear All Initiator Status */ + pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL; + /* Enable All Initiator Interrupts */ + pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL; + /* Clear All PCI Status Error */ + pcicptr->pcistatus = + (pcicptr->pcistatus & 0x0000ffff) | + (TX4938_PCIC_PCISTATUS_ALL << 16); + /* Enable All PCI Status Error Interrupts */ + pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL; + + if (!extarb) { + /* Reset Bus Arbiter */ + pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA; + pcicptr->pbabm = 0; + /* Enable Bus Arbiter */ + pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN; + } + + /* PCIC Int => IRC IRQ16 */ + pcicptr->pcicfg2 = + (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC; + + pcicptr->pcistatus = PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | + PCI_COMMAND_PARITY | PCI_COMMAND_SERR; +} + +int __init +tx4938_report_pciclk(void) +{ + unsigned long pcode = TX4938_REV_PCODE(); + int pciclk = 0; + printk("TX%lx PCIC --%s PCICLK:", + pcode, + (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : ""); + if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { + + switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) { + case TX4938_CCFG_PCIDIVMODE_4: + pciclk = txx9_cpu_clock / 4; break; + case TX4938_CCFG_PCIDIVMODE_4_5: + pciclk = txx9_cpu_clock * 2 / 9; break; + case TX4938_CCFG_PCIDIVMODE_5: + pciclk = txx9_cpu_clock / 5; break; + case TX4938_CCFG_PCIDIVMODE_5_5: + pciclk = txx9_cpu_clock * 2 / 11; break; + case TX4938_CCFG_PCIDIVMODE_8: + pciclk = txx9_cpu_clock / 8; break; + case TX4938_CCFG_PCIDIVMODE_9: + pciclk = txx9_cpu_clock / 9; break; + case TX4938_CCFG_PCIDIVMODE_10: + pciclk = txx9_cpu_clock / 10; break; + case TX4938_CCFG_PCIDIVMODE_11: + pciclk = txx9_cpu_clock / 11; break; + } + printk("Internal(%dMHz)", pciclk / 1000000); + } else { + printk("External"); + pciclk = -1; + } + printk("\n"); + return pciclk; +} + +void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr) +{ + pcicptrs[ch] = pcicptr; +} + +struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch) +{ + return pcicptrs[ch]; +} + +static struct pci_dev *fake_pci_dev(struct pci_controller *hose, + int top_bus, int busnr, int devfn) +{ + static struct pci_dev dev; + static struct pci_bus bus; + + dev.sysdata = bus.sysdata = hose; + dev.devfn = devfn; + bus.number = busnr; + bus.ops = hose->pci_ops; + bus.parent = NULL; + dev.bus = &bus; + + return &dev; +} + +#define EARLY_PCI_OP(rw, size, type) \ +static int early_##rw##_config_##size(struct pci_controller *hose, \ + int top_bus, int bus, int devfn, int offset, type value) \ +{ \ + return pci_##rw##_config_##size( \ + fake_pci_dev(hose, top_bus, bus, devfn), \ + offset, value); \ +} + +EARLY_PCI_OP(read, word, u16 *) + +int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus) +{ + u32 pci_devfn; + unsigned short vid; + int devfn_start = 0; + int devfn_stop = 0xff; + int cap66 = -1; + u16 stat; + + printk("PCI: Checking 66MHz capabilities...\n"); + + for (pci_devfn=devfn_start; pci_devfn 0; +} + +int __init +tx4938_pciclk66_setup(void) +{ + int pciclk; + + /* Assert M66EN */ + tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66; + /* Double PCICLK (if possible) */ + if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { + unsigned int pcidivmode = + tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK; + switch (pcidivmode) { + case TX4938_CCFG_PCIDIVMODE_8: + case TX4938_CCFG_PCIDIVMODE_4: + pcidivmode = TX4938_CCFG_PCIDIVMODE_4; + pciclk = txx9_cpu_clock / 4; + break; + case TX4938_CCFG_PCIDIVMODE_9: + case TX4938_CCFG_PCIDIVMODE_4_5: + pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5; + pciclk = txx9_cpu_clock * 2 / 9; + break; + case TX4938_CCFG_PCIDIVMODE_10: + case TX4938_CCFG_PCIDIVMODE_5: + pcidivmode = TX4938_CCFG_PCIDIVMODE_5; + pciclk = txx9_cpu_clock / 5; + break; + case TX4938_CCFG_PCIDIVMODE_11: + case TX4938_CCFG_PCIDIVMODE_5_5: + default: + pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5; + pciclk = txx9_cpu_clock * 2 / 11; + break; + } + tx4938_ccfgptr->ccfg = + (tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK) + | pcidivmode; + printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n", + (unsigned long)tx4938_ccfgptr->ccfg); + } else { + pciclk = -1; + } + return pciclk; +} + +extern struct pci_controller tx4938_pci_controller[]; +static int __init tx4938_pcibios_init(void) +{ + unsigned long mem_base[2]; + unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0, TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */ + unsigned long io_base[2]; + unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0, TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */ + /* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */ + int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB); + + PCIBIOS_MIN_IO = 0x00001000UL; + + mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]); + io_base[0] = txboard_request_phys_region_shrink(&io_size[0]); + + printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", + (unsigned short)(tx4938_pcicptr->pciid >> 16), + (unsigned short)(tx4938_pcicptr->pciid & 0xffff), + (unsigned short)(tx4938_pcicptr->pciccrev & 0xff), + extarb ? "External" : "Internal"); + + /* setup PCI area */ + tx4938_pci_controller[0].io_resource->start = io_base[0]; + tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1; + tx4938_pci_controller[0].mem_resource->start = mem_base[0]; + tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1; + + set_tx4938_pcicptr(0, tx4938_pcicptr); + + register_pci_controller(&tx4938_pci_controller[0]); + + if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) { + printk("TX4938_CCFG_PCI66 already configured\n"); + txboard_pci66_mode = -1; /* already configured */ + } + + /* Reset PCI Bus */ + writeb(0, rbtx4938_pcireset_addr); + /* Reset PCIC */ + tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; + if (txboard_pci66_mode > 0) + tx4938_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; + writeb(1, rbtx4938_pcireset_addr); + mmiowb(); + tx4938_report_pcic_status1(tx4938_pcicptr); + + tx4938_report_pciclk(); + tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); + if (txboard_pci66_mode == 0 && + txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) { + /* Reset PCI Bus */ + writeb(0, rbtx4938_pcireset_addr); + /* Reset PCIC */ + tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; + tx4938_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; + writeb(1, rbtx4938_pcireset_addr); + mmiowb(); + /* Reinitialize PCIC */ + tx4938_report_pciclk(); + tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); + } + + mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]); + io_base[1] = txboard_request_phys_region_shrink(&io_size[1]); + /* Reset PCIC1 */ + tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST; + /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */ + if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD)) + tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66; + else + tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66; + mdelay(10); + /* clear PCIC1 reset */ + tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; + tx4938_report_pcic_status1(tx4938_pcic1ptr); + + printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x", + (unsigned short)(tx4938_pcic1ptr->pciid >> 16), + (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff), + (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff)); + printk("%s PCICLK:%dMHz\n", + (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "", + txx9_gbus_clock / + ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) / + 1000000); + + /* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */ + tx4938_pci_controller[1].io_resource->start = + io_base[1] - io_base[0]; + tx4938_pci_controller[1].io_resource->end = + io_base[1] - io_base[0] + io_size[1] - 1; + tx4938_pci_controller[1].mem_resource->start = mem_base[1]; + tx4938_pci_controller[1].mem_resource->end = + mem_base[1] + mem_size[1] - 1; + set_tx4938_pcicptr(1, tx4938_pcic1ptr); + + register_pci_controller(&tx4938_pci_controller[1]); + + tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb); + + /* map ioport 0 to PCI I/O space address 0 */ + set_io_port_base(KSEG1 + io_base[0]); + + return 0; +} + +arch_initcall(tx4938_pcibios_init); + +#endif /* CONFIG_PCI */ + +/* SPI support */ + +/* chip select for SPI devices */ +#define SEEPROM1_CS 7 /* PIO7 */ +#define SEEPROM2_CS 0 /* IOC */ +#define SEEPROM3_CS 1 /* IOC */ +#define SRTC_CS 2 /* IOC */ + +#ifdef CONFIG_PCI +static int __init rbtx4938_ethaddr_init(void) +{ + unsigned char dat[17]; + unsigned char sum; + int i; + + /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ + if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) { + printk(KERN_ERR "seeprom: read error.\n"); + return -ENODEV; + } else { + if (strcmp(dat, "MAC") != 0) + printk(KERN_WARNING "seeprom: bad signature.\n"); + for (i = 0, sum = 0; i < sizeof(dat); i++) + sum += dat[i]; + if (sum) + printk(KERN_WARNING "seeprom: bad checksum.\n"); + } + for (i = 0; i < 2; i++) { + unsigned int id = + TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0); + struct platform_device *pdev; + if (!(tx4938_ccfgptr->pcfg & + (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL))) + continue; + pdev = platform_device_alloc("tc35815-mac", id); + if (!pdev || + platform_device_add_data(pdev, &dat[4 + 6 * i], 6) || + platform_device_add(pdev)) + platform_device_put(pdev); + } + return 0; +} +device_initcall(rbtx4938_ethaddr_init); +#endif /* CONFIG_PCI */ + +static void __init rbtx4938_spi_setup(void) +{ + /* set SPI_SEL */ + tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL; +} + +static struct resource rbtx4938_fpga_resource; + +static char pcode_str[8]; +static struct resource tx4938_reg_resource = { + .start = TX4938_REG_BASE, + .end = TX4938_REG_BASE + TX4938_REG_SIZE, + .name = pcode_str, + .flags = IORESOURCE_MEM +}; + +void __init tx4938_board_setup(void) +{ + int i; + unsigned long divmode; + int cpuclk = 0; + unsigned long pcode = TX4938_REV_PCODE(); + + ioport_resource.start = 0x1000; + ioport_resource.end = 0xffffffff; + iomem_resource.start = 0x1000; + iomem_resource.end = 0xffffffff; /* expand to 4GB */ + + sprintf(pcode_str, "TX%lx", pcode); + /* SDRAMC,EBUSC are configured by PROM */ + for (i = 0; i < 8; i++) { + if (!(tx4938_ebuscptr->cr[i] & 0x8)) + continue; /* disabled */ + rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i); + txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i)); + } + + /* clocks */ + if (txx9_master_clock) { + /* calculate gbus_clock and cpu_clock_freq from master_clock */ + divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; + switch (divmode) { + case TX4938_CCFG_DIVMODE_8: + case TX4938_CCFG_DIVMODE_10: + case TX4938_CCFG_DIVMODE_12: + case TX4938_CCFG_DIVMODE_16: + case TX4938_CCFG_DIVMODE_18: + txx9_gbus_clock = txx9_master_clock * 4; break; + default: + txx9_gbus_clock = txx9_master_clock; + } + switch (divmode) { + case TX4938_CCFG_DIVMODE_2: + case TX4938_CCFG_DIVMODE_8: + cpuclk = txx9_gbus_clock * 2; break; + case TX4938_CCFG_DIVMODE_2_5: + case TX4938_CCFG_DIVMODE_10: + cpuclk = txx9_gbus_clock * 5 / 2; break; + case TX4938_CCFG_DIVMODE_3: + case TX4938_CCFG_DIVMODE_12: + cpuclk = txx9_gbus_clock * 3; break; + case TX4938_CCFG_DIVMODE_4: + case TX4938_CCFG_DIVMODE_16: + cpuclk = txx9_gbus_clock * 4; break; + case TX4938_CCFG_DIVMODE_4_5: + case TX4938_CCFG_DIVMODE_18: + cpuclk = txx9_gbus_clock * 9 / 2; break; + } + txx9_cpu_clock = cpuclk; + } else { + if (txx9_cpu_clock == 0) { + txx9_cpu_clock = 300000000; /* 300MHz */ + } + /* calculate gbus_clock and master_clock from cpu_clock_freq */ + cpuclk = txx9_cpu_clock; + divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; + switch (divmode) { + case TX4938_CCFG_DIVMODE_2: + case TX4938_CCFG_DIVMODE_8: + txx9_gbus_clock = cpuclk / 2; break; + case TX4938_CCFG_DIVMODE_2_5: + case TX4938_CCFG_DIVMODE_10: + txx9_gbus_clock = cpuclk * 2 / 5; break; + case TX4938_CCFG_DIVMODE_3: + case TX4938_CCFG_DIVMODE_12: + txx9_gbus_clock = cpuclk / 3; break; + case TX4938_CCFG_DIVMODE_4: + case TX4938_CCFG_DIVMODE_16: + txx9_gbus_clock = cpuclk / 4; break; + case TX4938_CCFG_DIVMODE_4_5: + case TX4938_CCFG_DIVMODE_18: + txx9_gbus_clock = cpuclk * 2 / 9; break; + } + switch (divmode) { + case TX4938_CCFG_DIVMODE_8: + case TX4938_CCFG_DIVMODE_10: + case TX4938_CCFG_DIVMODE_12: + case TX4938_CCFG_DIVMODE_16: + case TX4938_CCFG_DIVMODE_18: + txx9_master_clock = txx9_gbus_clock / 4; break; + default: + txx9_master_clock = txx9_gbus_clock; + } + } + /* change default value to udelay/mdelay take reasonable time */ + loops_per_jiffy = txx9_cpu_clock / HZ / 2; + + /* CCFG */ + /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */ + tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW; + /* do reset on watchdog */ + tx4938_ccfgptr->ccfg |= TX4938_CCFG_WR; + /* clear PCIC1 reset */ + if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST) + tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; + + /* enable Timeout BusError */ + if (tx4938_ccfg_toeon) + tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE; + + /* DMA selection */ + tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL; + + /* Use external clock for external arbiter */ + if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB)) + tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL; + + printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n", + pcode_str, + cpuclk / 1000000, txx9_master_clock / 1000000, + (unsigned long)tx4938_ccfgptr->crir, + tx4938_ccfgptr->ccfg, + tx4938_ccfgptr->pcfg); + + printk("%s SDRAMC --", pcode_str); + for (i = 0; i < 4; i++) { + unsigned long long cr = tx4938_sdramcptr->cr[i]; + unsigned long ram_base, ram_size; + if (!((unsigned long)cr & 0x00000400)) + continue; /* disabled */ + ram_base = (unsigned long)(cr >> 49) << 21; + ram_size = ((unsigned long)(cr >> 33) + 1) << 21; + if (ram_base >= 0x20000000) + continue; /* high memory (ignore) */ + printk(" CR%d:%016Lx", i, cr); + txboard_add_phys_region(ram_base, ram_size); + } + printk(" TR:%09Lx\n", tx4938_sdramcptr->tr); + + /* SRAM */ + if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) { + unsigned int size = 0x800; + unsigned long base = + (tx4938_sramcptr->cr >> (39-11)) & ~(size - 1); + txboard_add_phys_region(base, size); + } + + /* TMR */ + for (i = 0; i < TX4938_NR_TMR; i++) + txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL); + + /* enable DMA */ + for (i = 0; i < 2; i++) + ____raw_writeq(TX4938_DMA_MCR_MSTEN, + (void __iomem *)(TX4938_DMA_REG(i) + 0x50)); + + /* PIO */ + __raw_writel(0, &tx4938_pioptr->maskcpu); + __raw_writel(0, &tx4938_pioptr->maskext); + + /* TX4938 internal registers */ + if (request_resource(&iomem_resource, &tx4938_reg_resource)) + printk("request resource for internal registers failed\n"); +} + +#ifdef CONFIG_PCI +static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr) +{ + unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16); + unsigned long g2pstatus = pcicptr->g2pstatus; + unsigned long pcicstatus = pcicptr->pcicstatus; + static struct { + unsigned long flag; + const char *str; + } pcistat_tbl[] = { + { PCI_STATUS_DETECTED_PARITY, "DetectedParityError" }, + { PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" }, + { PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" }, + { PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" }, + { PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" }, + { PCI_STATUS_PARITY, "MasterParityError" }, + }, g2pstat_tbl[] = { + { TX4938_PCIC_G2PSTATUS_TTOE, "TIOE" }, + { TX4938_PCIC_G2PSTATUS_RTOE, "RTOE" }, + }, pcicstat_tbl[] = { + { TX4938_PCIC_PCICSTATUS_PME, "PME" }, + { TX4938_PCIC_PCICSTATUS_TLB, "TLB" }, + { TX4938_PCIC_PCICSTATUS_NIB, "NIB" }, + { TX4938_PCIC_PCICSTATUS_ZIB, "ZIB" }, + { TX4938_PCIC_PCICSTATUS_PERR, "PERR" }, + { TX4938_PCIC_PCICSTATUS_SERR, "SERR" }, + { TX4938_PCIC_PCICSTATUS_GBE, "GBE" }, + { TX4938_PCIC_PCICSTATUS_IWB, "IWB" }, + }; + int i; + + printk("pcistat:%04x(", pcistatus); + for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++) + if (pcistatus & pcistat_tbl[i].flag) + printk("%s ", pcistat_tbl[i].str); + printk("), g2pstatus:%08lx(", g2pstatus); + for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++) + if (g2pstatus & g2pstat_tbl[i].flag) + printk("%s ", g2pstat_tbl[i].str); + printk("), pcicstatus:%08lx(", pcicstatus); + for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++) + if (pcicstatus & pcicstat_tbl[i].flag) + printk("%s ", pcicstat_tbl[i].str); + printk(")\n"); +} + +void tx4938_report_pcic_status(void) +{ + int i; + struct tx4938_pcic_reg *pcicptr; + for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++) + tx4938_report_pcic_status1(pcicptr); +} + +#endif /* CONFIG_PCI */ + +void __init plat_time_init(void) +{ + mips_hpt_frequency = txx9_cpu_clock / 2; + if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS) + txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4938_IR_TMR(0), + txx9_gbus_clock / 2); +} + +void __init plat_mem_setup(void) +{ + unsigned long long pcfg; + char *argptr; + + iomem_resource.end = 0xffffffff; /* 4GB */ + + if (txx9_master_clock == 0) + txx9_master_clock = 25000000; /* 25MHz */ + tx4938_board_setup(); +#ifndef CONFIG_PCI + set_io_port_base(RBTX4938_ETHER_BASE); +#endif + +#ifdef CONFIG_SERIAL_TXX9 + { + extern int early_serial_txx9_setup(struct uart_port *port); + int i; + struct uart_port req; + for(i = 0; i < 2; i++) { + memset(&req, 0, sizeof(req)); + req.line = i; + req.iotype = UPIO_MEM; + req.membase = (char *)(0xff1ff300 + i * 0x100); + req.mapbase = 0xff1ff300 + i * 0x100; + req.irq = RBTX4938_IRQ_IRC_SIO(i); + req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; + req.uartclk = 50000000; + early_serial_txx9_setup(&req); + } + } +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + argptr = prom_getcmdline(); + if (strstr(argptr, "console=") == NULL) { + strcat(argptr, " console=ttyS0,38400"); + } +#endif +#endif + +#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 + printk("PIOSEL: disabling both ata and nand selection\n"); + local_irq_disable(); + tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); +#endif + +#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND + printk("PIOSEL: enabling nand selection\n"); + tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL; + tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL; +#endif + +#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA + printk("PIOSEL: enabling ata selection\n"); + tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL; + tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL; +#endif + +#ifdef CONFIG_IP_PNP + argptr = prom_getcmdline(); + if (strstr(argptr, "ip=") == NULL) { + strcat(argptr, " ip=any"); + } +#endif + + +#ifdef CONFIG_FB + { + conswitchp = &dummy_con; + } +#endif + + rbtx4938_spi_setup(); + pcfg = tx4938_ccfgptr->pcfg; /* updated */ + /* fixup piosel */ + if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == + TX4938_PCFG_ATA_SEL) + writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04, + rbtx4938_piosel_addr); + else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == + TX4938_PCFG_NDF_SEL) + writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08, + rbtx4938_piosel_addr); + else + writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04), + rbtx4938_piosel_addr); + + rbtx4938_fpga_resource.name = "FPGA Registers"; + rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR); + rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff; + rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY; + if (request_resource(&iomem_resource, &rbtx4938_fpga_resource)) + printk("request resource for fpga failed\n"); + + _machine_restart = rbtx4938_machine_restart; + _machine_halt = rbtx4938_machine_halt; + pm_power_off = rbtx4938_machine_power_off; + + writeb(0xff, rbtx4938_led_addr); + printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", + readb(rbtx4938_fpga_rev_addr), + readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr)); +} + +static int __init rbtx4938_ne_init(void) +{ + struct resource res[] = { + { + .start = RBTX4938_RTL_8019_BASE, + .end = RBTX4938_RTL_8019_BASE + 0x20 - 1, + .flags = IORESOURCE_IO, + }, { + .start = RBTX4938_RTL_8019_IRQ, + .flags = IORESOURCE_IRQ, + } + }; + struct platform_device *dev = + platform_device_register_simple("ne", -1, + res, ARRAY_SIZE(res)); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} +device_initcall(rbtx4938_ne_init); + +/* GPIO support */ + +int gpio_to_irq(unsigned gpio) +{ + return -EINVAL; +} + +int irq_to_gpio(unsigned irq) +{ + return -EINVAL; +} + +static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock); + +static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + u8 val; + unsigned long flags; + spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags); + val = readb(rbtx4938_spics_addr); + if (value) + val |= 1 << offset; + else + val &= ~(1 << offset); + writeb(val, rbtx4938_spics_addr); + mmiowb(); + spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags); +} + +static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip, + unsigned int offset, int value) +{ + rbtx4938_spi_gpio_set(chip, offset, value); + return 0; +} + +static struct gpio_chip rbtx4938_spi_gpio_chip = { + .set = rbtx4938_spi_gpio_set, + .direction_output = rbtx4938_spi_gpio_dir_out, + .label = "RBTX4938-SPICS", + .base = 16, + .ngpio = 3, +}; + +/* SPI support */ + +static void __init txx9_spi_init(unsigned long base, int irq) +{ + struct resource res[] = { + { + .start = base, + .end = base + 0x20 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .flags = IORESOURCE_IRQ, + }, + }; + platform_device_register_simple("spi_txx9", 0, + res, ARRAY_SIZE(res)); +} + +static int __init rbtx4938_spi_init(void) +{ + struct spi_board_info srtc_info = { + .modalias = "rtc-rs5c348", + .max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */ + .bus_num = 0, + .chip_select = 16 + SRTC_CS, + /* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS */ + .mode = SPI_MODE_1 | SPI_CS_HIGH, + }; + spi_register_board_info(&srtc_info, 1); + spi_eeprom_register(SEEPROM1_CS); + spi_eeprom_register(16 + SEEPROM2_CS); + spi_eeprom_register(16 + SEEPROM3_CS); + gpio_request(16 + SRTC_CS, "rtc-rs5c348"); + gpio_direction_output(16 + SRTC_CS, 0); + gpio_request(SEEPROM1_CS, "seeprom1"); + gpio_direction_output(SEEPROM1_CS, 1); + gpio_request(16 + SEEPROM2_CS, "seeprom2"); + gpio_direction_output(16 + SEEPROM2_CS, 1); + gpio_request(16 + SEEPROM3_CS, "seeprom3"); + gpio_direction_output(16 + SEEPROM3_CS, 1); + txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI); + return 0; +} + +static int __init rbtx4938_arch_init(void) +{ + txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16); + gpiochip_add(&rbtx4938_spi_gpio_chip); + return rbtx4938_spi_init(); +} +arch_initcall(rbtx4938_arch_init); + +/* Watchdog support */ + +static int __init txx9_wdt_init(unsigned long base) +{ + struct resource res = { + .start = base, + .end = base + 0x100 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev = + platform_device_register_simple("txx9wdt", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} + +static int __init rbtx4938_wdt_init(void) +{ + return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); +} +device_initcall(rbtx4938_wdt_init); + +/* Minimum CLK support */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "spi-baseclk")) + return (struct clk *)(txx9_gbus_clock / 2 / 4); + if (!strcmp(id, "imbus_clk")) + return (struct clk *)(txx9_gbus_clock / 2); + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/txx9/rbtx4938/spi_eeprom.c b/arch/mips/txx9/rbtx4938/spi_eeprom.c new file mode 100644 index 000000000000..a7ea8b041c1d --- /dev/null +++ b/arch/mips/txx9/rbtx4938/spi_eeprom.c @@ -0,0 +1,99 @@ +/* + * spi_eeprom.c + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#include +#include +#include +#include +#include + +#define AT250X0_PAGE_SIZE 8 + +/* register board information for at25 driver */ +int __init spi_eeprom_register(int chipid) +{ + static struct spi_eeprom eeprom = { + .name = "at250x0", + .byte_len = 128, + .page_size = AT250X0_PAGE_SIZE, + .flags = EE_ADDR1, + }; + struct spi_board_info info = { + .modalias = "at25", + .max_speed_hz = 1500000, /* 1.5Mbps */ + .bus_num = 0, + .chip_select = chipid, + .platform_data = &eeprom, + /* Mode 0: High-Active, Sample-Then-Shift */ + }; + + return spi_register_board_info(&info, 1); +} + +/* simple temporary spi driver to provide early access to seeprom. */ + +static struct read_param { + int chipid; + int address; + unsigned char *buf; + int len; +} *read_param; + +static int __init early_seeprom_probe(struct spi_device *spi) +{ + int stat = 0; + u8 cmd[2]; + int len = read_param->len; + char *buf = read_param->buf; + int address = read_param->address; + + dev_info(&spi->dev, "spiclk %u KHz.\n", + (spi->max_speed_hz + 500) / 1000); + if (read_param->chipid != spi->chip_select) + return -ENODEV; + while (len > 0) { + /* spi_write_then_read can only work with small chunk */ + int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE; + cmd[0] = 0x03; /* AT25_READ */ + cmd[1] = address; + stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c); + buf += c; + len -= c; + address += c; + } + return stat; +} + +static struct spi_driver early_seeprom_driver __initdata = { + .driver = { + .name = "at25", + .owner = THIS_MODULE, + }, + .probe = early_seeprom_probe, +}; + +int __init spi_eeprom_read(int chipid, int address, + unsigned char *buf, int len) +{ + int ret; + struct read_param param = { + .chipid = chipid, + .address = address, + .buf = buf, + .len = len + }; + + read_param = ¶m; + ret = spi_register_driver(&early_seeprom_driver); + if (!ret) + spi_unregister_driver(&early_seeprom_driver); + return ret; +} -- cgit v1.2.3 From 89d63fe179520b11f54de1f26755b7444c79e73a Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 11 Jul 2008 00:33:08 +0900 Subject: [MIPS] TXx9: Reorganize PCI code Split out PCIC dependent code and SoC dependent code from board dependent code. Now TX4927 PCIC code is independent from TX4927/TX4938 SoC code. Also fix some build problems on CONFIG_PCI=n. As a bonus, "FPCIB0 Backplane Support" is available for all TX39/TX49 boards and PCI66 support is available for all TX49 boards. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 3 +- arch/mips/pci/Makefile | 8 +- arch/mips/pci/fixup-jmr3927.c | 25 +- arch/mips/pci/fixup-rbtx4927.c | 112 ++----- arch/mips/pci/fixup-rbtx4938.c | 52 +--- arch/mips/pci/ops-tx3927.c | 87 +++++- arch/mips/pci/ops-tx4927.c | 514 +++++++++++++++++++++---------- arch/mips/pci/ops-tx4938.c | 214 ------------- arch/mips/pci/pci-jmr3927.c | 58 ---- arch/mips/pci/pci-tx4927.c | 83 +++++ arch/mips/pci/pci-tx4938.c | 134 ++++++++ arch/mips/txx9/Kconfig | 11 +- arch/mips/txx9/generic/Makefile | 2 + arch/mips/txx9/generic/pci.c | 377 +++++++++++++++++++++++ arch/mips/txx9/generic/setup.c | 51 +++ arch/mips/txx9/jmr3927/irq.c | 2 + arch/mips/txx9/jmr3927/setup.c | 108 ++----- arch/mips/txx9/rbtx4927/irq.c | 20 +- arch/mips/txx9/rbtx4927/setup.c | 499 ++++++++---------------------- arch/mips/txx9/rbtx4938/setup.c | 667 ++++++---------------------------------- 20 files changed, 1397 insertions(+), 1630 deletions(-) delete mode 100644 arch/mips/pci/ops-tx4938.c delete mode 100644 arch/mips/pci/pci-jmr3927.c create mode 100644 arch/mips/pci/pci-tx4927.c create mode 100644 arch/mips/pci/pci-tx4938.c create mode 100644 arch/mips/txx9/generic/pci.c create mode 100644 arch/mips/txx9/generic/setup.c (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 3202960f7597..2ea6fff88811 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -575,7 +575,7 @@ config TOSHIBA_RBTX4927 select HW_HAS_PCI select IRQ_CPU select IRQ_TXX9 - select I8259 if TOSHIBA_FPCIB0 + select PCI_TX4927 select SWAP_IO_SPACE select SYS_HAS_CPU_TX49XX select SYS_SUPPORTS_32BIT_KERNEL @@ -598,6 +598,7 @@ config TOSHIBA_RBTX4938 select HW_HAS_PCI select IRQ_CPU select IRQ_TXX9 + select PCI_TX4927 select SWAP_IO_SPACE select SYS_HAS_CPU_TX49XX select SYS_SUPPORTS_32BIT_KERNEL diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 4608e43de28c..908764878ac8 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -15,6 +15,8 @@ obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o +obj-$(CONFIG_PCI_TX3927) += ops-tx3927.o +obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o # # These are still pretty much in the old state, watch, go blind. @@ -41,9 +43,9 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o -obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o pci-jmr3927.o -obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o ops-tx4927.o -obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o ops-tx4938.o +obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o +obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o pci-tx4927.o pci-tx4938.o +obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o pci-tx4938.o obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c index 41dcd6a3aae5..d5edaf21e088 100644 --- a/arch/mips/pci/fixup-jmr3927.c +++ b/arch/mips/pci/fixup-jmr3927.c @@ -28,36 +28,31 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include -#include -#include - +#include #include int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq = pin; - /* SMSC SLC90E66 IDE uses irq 14, 15 (default) */ - if (dev->vendor == PCI_VENDOR_ID_EFAR && - dev->device == PCI_DEVICE_ID_EFAR_SLC90E66_1) - return irq; /* IRQ rotation (PICMG) */ irq--; /* 0-3 */ - if (dev->bus->parent == NULL && - slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(23)) { + if (slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(23)) { /* PCI CardSlot (IDSEL=A23, DevNu=12) */ /* PCIA => PCIC (IDSEL=A23) */ /* NOTE: JMR3927 JP1 must be set to OPEN */ irq = (irq + 2) % 4; - } else if (dev->bus->parent == NULL && - slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(22)) { + } else if (slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(22)) { /* PCI CardSlot (IDSEL=A22, DevNu=11) */ /* PCIA => PCIA (IDSEL=A22) */ /* NOTE: JMR3927 JP1 must be set to OPEN */ irq = (irq + 0) % 4; } else { /* PCI Backplane */ - irq = (irq + 3 + slot) % 4; + if (txx9_pci_option & TXX9_PCI_OPT_PICMG) + irq = (irq + 33 - slot) % 4; + else + irq = (irq + 3 + slot) % 4; } irq++; /* 1-4 */ @@ -66,15 +61,13 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) irq = JMR3927_IRQ_IOC_PCIA; break; case 2: - // wrong for backplane irq = JMR3927_IRQ_IOC_PCIB; - irq = JMR3927_IRQ_IOC_PCID; + irq = JMR3927_IRQ_IOC_PCIB; break; case 3: irq = JMR3927_IRQ_IOC_PCIC; break; case 4: - // wrong for backplane irq = JMR3927_IRQ_IOC_PCID; - irq = JMR3927_IRQ_IOC_PCIB; + irq = JMR3927_IRQ_IOC_PCID; break; } diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c index 26013badfe1f..abab4852d158 100644 --- a/arch/mips/pci/fixup-rbtx4927.c +++ b/arch/mips/pci/fixup-rbtx4927.c @@ -33,102 +33,42 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include -#include -#include -#include +#include +#include -#include - -#undef DEBUG -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -/* look up table for backplane pci irq for slots 17-20 by pin # */ -static unsigned char backplane_pci_irq[4][4] = { - /* PJ6 SLOT: 17, PIN: 1 */ {TX4927_IRQ_IOC_PCIA, - /* PJ6 SLOT: 17, PIN: 2 */ - TX4927_IRQ_IOC_PCIB, - /* PJ6 SLOT: 17, PIN: 3 */ - TX4927_IRQ_IOC_PCIC, - /* PJ6 SLOT: 17, PIN: 4 */ - TX4927_IRQ_IOC_PCID}, - /* SB SLOT: 18, PIN: 1 */ {TX4927_IRQ_IOC_PCIB, - /* SB SLOT: 18, PIN: 2 */ - TX4927_IRQ_IOC_PCIC, - /* SB SLOT: 18, PIN: 3 */ - TX4927_IRQ_IOC_PCID, - /* SB SLOT: 18, PIN: 4 */ - TX4927_IRQ_IOC_PCIA}, - /* PJ5 SLOT: 19, PIN: 1 */ {TX4927_IRQ_IOC_PCIC, - /* PJ5 SLOT: 19, PIN: 2 */ - TX4927_IRQ_IOC_PCID, - /* PJ5 SLOT: 19, PIN: 3 */ - TX4927_IRQ_IOC_PCIA, - /* PJ5 SLOT: 19, PIN: 4 */ - TX4927_IRQ_IOC_PCIB}, - /* PJ4 SLOT: 20, PIN: 1 */ {TX4927_IRQ_IOC_PCID, - /* PJ4 SLOT: 20, PIN: 2 */ - TX4927_IRQ_IOC_PCIA, - /* PJ4 SLOT: 20, PIN: 3 */ - TX4927_IRQ_IOC_PCIB, - /* PJ4 SLOT: 20, PIN: 4 */ - TX4927_IRQ_IOC_PCIC} -}; - -static int pci_get_irq(const struct pci_dev *dev, int pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq = pin; - DBG("pci_get_irq: pin is %d\n", pin); /* IRQ rotation */ irq--; /* 0-3 */ - if (dev->bus->parent == NULL && - PCI_SLOT(dev->devfn) == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) { - printk("Onboard PCI_SLOT(dev->devfn) is %d\n", - PCI_SLOT(dev->devfn)); - /* IDSEL=A23 is tx4927 onboard pci slot */ - irq = (irq + PCI_SLOT(dev->devfn)) % 4; - irq++; /* 1-4 */ - DBG("irq is now %d\n", irq); - - switch (irq) { - case 1: - irq = TX4927_IRQ_IOC_PCIA; - break; - case 2: - irq = TX4927_IRQ_IOC_PCIB; - break; - case 3: - irq = TX4927_IRQ_IOC_PCIC; - break; - case 4: - irq = TX4927_IRQ_IOC_PCID; - break; - } + if (slot == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) { + /* PCI CardSlot (IDSEL=A23) */ + /* PCIA => PCIA */ + irq = (irq + 0 + slot) % 4; } else { /* PCI Backplane */ - DBG("PCI Backplane PCI_SLOT(dev->devfn) is %d\n", - PCI_SLOT(dev->devfn)); - irq = backplane_pci_irq[PCI_SLOT(dev->devfn) - 17][irq]; + if (txx9_pci_option & TXX9_PCI_OPT_PICMG) + irq = (irq + 33 - slot) % 4; + else + irq = (irq + 3 + slot) % 4; } - DBG("assigned irq %d\n", irq); - return irq; -} - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - unsigned char irq; - - printk("PCI Setup for pin %d \n", pin); - - if (dev->device == 0x9130) /* IDE */ - irq = 14; - else - irq = pci_get_irq(dev, pin); + irq++; /* 1-4 */ + switch (irq) { + case 1: + irq = RBTX4927_IRQ_IOC_PCIA; + break; + case 2: + irq = RBTX4927_IRQ_IOC_PCIB; + break; + case 3: + irq = RBTX4927_IRQ_IOC_PCIC; + break; + case 4: + irq = RBTX4927_IRQ_IOC_PCID; + break; + } return irq; } diff --git a/arch/mips/pci/fixup-rbtx4938.c b/arch/mips/pci/fixup-rbtx4938.c index 64d4510c0265..39c995830384 100644 --- a/arch/mips/pci/fixup-rbtx4938.c +++ b/arch/mips/pci/fixup-rbtx4938.c @@ -10,45 +10,28 @@ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) */ #include -#include -#include -#include - +#include #include -extern struct pci_controller tx4938_pci_controller[]; - -static int pci_get_irq(const struct pci_dev *dev, int pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - int irq = pin; - u8 slot = PCI_SLOT(dev->devfn); - struct pci_controller *controller = (struct pci_controller *)dev->sysdata; - - if (controller == &tx4938_pci_controller[1]) { - /* TX4938 PCIC1 */ - switch (slot) { - case TX4938_PCIC_IDSEL_AD_TO_SLOT(31): - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL) - return RBTX4938_IRQ_IRC + TX4938_IR_ETH0; - break; - case TX4938_PCIC_IDSEL_AD_TO_SLOT(30): - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL) - return RBTX4938_IRQ_IRC + TX4938_IR_ETH1; - break; - } - return 0; - } + int irq = tx4938_pcic1_map_irq(dev, slot); + if (irq >= 0) + return irq; + irq = pin; /* IRQ rotation */ irq--; /* 0-3 */ - if (dev->bus->parent == NULL && - (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) { + if (slot == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) { /* PCI CardSlot (IDSEL=A23) */ /* PCIA => PCIA (IDSEL=A23) */ irq = (irq + 0 + slot) % 4; } else { /* PCI Backplane */ - irq = (irq + 33 - slot) % 4; + if (txx9_pci_option & TXX9_PCI_OPT_PICMG) + irq = (irq + 33 - slot) % 4; + else + irq = (irq + 3 + slot) % 4; } irq++; /* 1-4 */ @@ -69,19 +52,6 @@ static int pci_get_irq(const struct pci_dev *dev, int pin) return irq; } -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - unsigned char irq = 0; - - irq = pci_get_irq(dev, pin); - - printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n", - dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn), - PCI_FUNC(dev->devfn), irq); - - return irq; -} - /* * Do platform specific device initialization at pci_enable_device() time */ diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index 5d398f694682..8a17a39e5bf2 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -8,7 +8,7 @@ * * Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c * - * Define the pci_ops for JMR3927. + * Define the pci_ops for TX3927. * * Much of the code is derived from the original DDB5074 port by * Geert Uytterhoeven @@ -39,7 +39,7 @@ #include #include -#include +#include static inline int mkaddr(unsigned char bus, unsigned char dev_fn, unsigned char where) @@ -68,7 +68,7 @@ static inline int check_abort(void) return PCIBIOS_SUCCESSFUL; } -static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, +static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) { int ret; @@ -94,7 +94,7 @@ static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, return check_abort(); } -static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, +static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { int ret; @@ -125,7 +125,80 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, return check_abort(); } -struct pci_ops jmr3927_pci_ops = { - jmr3927_pci_read_config, - jmr3927_pci_write_config, +static struct pci_ops tx3927_pci_ops = { + .read = tx3927_pci_read_config, + .write = tx3927_pci_write_config, }; + +void __init tx3927_pcic_setup(struct pci_controller *channel, + unsigned long sdram_size, int extarb) +{ + unsigned long flags; + unsigned long io_base = + channel->io_resource->start + mips_io_port_base - IO_BASE; + unsigned long io_size = + channel->io_resource->end - channel->io_resource->start; + unsigned long io_pciaddr = + channel->io_resource->start - channel->io_offset; + unsigned long mem_base = + channel->mem_resource->start; + unsigned long mem_size = + channel->mem_resource->end - channel->mem_resource->start; + unsigned long mem_pciaddr = + channel->mem_resource->start - channel->mem_offset; + + printk(KERN_INFO "TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s", + tx3927_pcicptr->did, tx3927_pcicptr->vid, + tx3927_pcicptr->rid, + extarb ? "External" : "Internal"); + channel->pci_ops = &tx3927_pci_ops; + + local_irq_save(flags); + /* Disable External PCI Config. Access */ + tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD; +#ifdef __BIG_ENDIAN + tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE | + TX3927_PCIC_LBC_TIBSE | + TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE; +#endif + /* LB->PCI mappings */ + tx3927_pcicptr->iomas = ~(io_size - 1); + tx3927_pcicptr->ilbioma = io_base; + tx3927_pcicptr->ipbioma = io_pciaddr; + tx3927_pcicptr->mmas = ~(mem_size - 1); + tx3927_pcicptr->ilbmma = mem_base; + tx3927_pcicptr->ipbmma = mem_pciaddr; + /* PCI->LB mappings */ + tx3927_pcicptr->iobas = 0xffffffff; + tx3927_pcicptr->ioba = 0; + tx3927_pcicptr->tlbioma = 0; + tx3927_pcicptr->mbas = ~(sdram_size - 1); + tx3927_pcicptr->mba = 0; + tx3927_pcicptr->tlbmma = 0; + /* Enable Direct mapping Address Space Decoder */ + tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE; + + /* Clear All Local Bus Status */ + tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL; + /* Enable All Local Bus Interrupts */ + tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL; + /* Clear All PCI Status Error */ + tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL; + /* Enable All PCI Status Error Interrupts */ + tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL; + + /* PCIC Int => IRC IRQ10 */ + tx3927_pcicptr->il = TX3927_IR_PCI; + /* Target Control (per errata) */ + tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E; + + /* Enable Bus Arbiter */ + if (!extarb) + tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN; + + tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | + PCI_COMMAND_IO | + PCI_COMMAND_PARITY | PCI_COMMAND_SERR; + local_irq_restore(flags); +} diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index 54730eee451b..c6b49bccd274 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -1,206 +1,408 @@ /* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com + * Define the pci_ops for the PCIC on Toshiba TX4927, TX4938, etc. * - * Copyright (C) 2000-2001 Toshiba Corporation - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c - * - * Define the pci_ops for the Toshiba rbtx4927 - * - * Much of the code is derived from the original DDB5074 port by - * Geert Uytterhoeven - * - * Copyright 2004 MontaVista Software Inc. - * Author: Manish Lachwani (mlachwani@mvista.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * Based on linux/arch/mips/pci/ops-tx4938.c, + * linux/arch/mips/pci/fixup-rbtx4938.c, + * linux/arch/mips/txx9/rbtx4938/setup.c, + * and RBTX49xx patch from CELF patch archive. * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * 2003-2005 (c) MontaVista Software, Inc. + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. */ -#include -#include #include -#include -#include - -/* initialize in setup */ -struct resource pci_io_resource = { - .name = "TX4927 PCI IO SPACE", - .start = 0x1000, - .end = (0x1000 + (TX4927_PCIIO_SIZE)) - 1, - .flags = IORESOURCE_IO -}; +#include -/* initialize in setup */ -struct resource pci_mem_resource = { - .name = "TX4927 PCI MEM SPACE", - .start = TX4927_PCIMEM, - .end = TX4927_PCIMEM + TX4927_PCIMEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; +static struct { + struct pci_controller *channel; + struct tx4927_pcic_reg __iomem *pcicptr; +} pcicptrs[2]; /* TX4938 has 2 pcic */ + +static void __init set_tx4927_pcicptr(struct pci_controller *channel, + struct tx4927_pcic_reg __iomem *pcicptr) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) { + if (pcicptrs[i].channel == channel) { + pcicptrs[i].pcicptr = pcicptr; + return; + } + } + for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) { + if (!pcicptrs[i].channel) { + pcicptrs[i].channel = channel; + pcicptrs[i].pcicptr = pcicptr; + return; + } + } + BUG(); +} -static int mkaddr(int bus, int dev_fn, int where, int *flagsp) +struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr( + struct pci_controller *channel) { - if (bus > 0) { - /* Type 1 configuration */ - tx4927_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | - ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1; - } else { - if (dev_fn >= PCI_DEVFN(TX4927_PCIC_MAX_DEVNU, 0)) - return -1; + int i; - /* Type 0 configuration */ - tx4927_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | - ((dev_fn & 0xff) << 0x08) | (where & 0xfc); + for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) { + if (pcicptrs[i].channel == channel) + return pcicptrs[i].pcicptr; } + return NULL; +} + +static int mkaddr(struct pci_bus *bus, unsigned int devfn, int where, + struct tx4927_pcic_reg __iomem *pcicptr) +{ + if (bus->parent == NULL && + devfn >= PCI_DEVFN(TX4927_PCIC_MAX_DEVNU, 0)) + return -1; + __raw_writel(((bus->number & 0xff) << 0x10) + | ((devfn & 0xff) << 0x08) | (where & 0xfc) + | (bus->parent ? 1 : 0), + &pcicptr->g2pcfgadrs); /* clear M_ABORT and Disable M_ABORT Int. */ - tx4927_pcicptr->pcistatus = - (tx4927_pcicptr->pcistatus & 0x0000ffff) | - (PCI_STATUS_REC_MASTER_ABORT << 16); - tx4927_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT; + __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff) + | (PCI_STATUS_REC_MASTER_ABORT << 16), + &pcicptr->pcistatus); return 0; } -static int check_abort(int flags) +static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr) { int code = PCIBIOS_SUCCESSFUL; - if (tx4927_pcicptr-> - pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) { - tx4927_pcicptr->pcistatus = - (tx4927_pcicptr-> - pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT - << 16); - tx4927_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT; + + /* wait write cycle completion before checking error status */ + while (__raw_readl(&pcicptr->pcicstatus) & TX4927_PCIC_PCICSTATUS_IWB) + ; + if (__raw_readl(&pcicptr->pcistatus) + & (PCI_STATUS_REC_MASTER_ABORT << 16)) { + __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff) + | (PCI_STATUS_REC_MASTER_ABORT << 16), + &pcicptr->pcistatus); code = PCIBIOS_DEVICE_NOT_FOUND; } return code; } -static int tx4927_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 * val) +static u8 icd_readb(int offset, struct tx4927_pcic_reg __iomem *pcicptr) +{ +#ifdef __BIG_ENDIAN + offset ^= 3; +#endif + return __raw_readb((void __iomem *)&pcicptr->g2pcfgdata + offset); +} +static u16 icd_readw(int offset, struct tx4927_pcic_reg __iomem *pcicptr) +{ +#ifdef __BIG_ENDIAN + offset ^= 2; +#endif + return __raw_readw((void __iomem *)&pcicptr->g2pcfgdata + offset); +} +static u32 icd_readl(struct tx4927_pcic_reg __iomem *pcicptr) +{ + return __raw_readl(&pcicptr->g2pcfgdata); +} +static void icd_writeb(u8 val, int offset, + struct tx4927_pcic_reg __iomem *pcicptr) +{ +#ifdef __BIG_ENDIAN + offset ^= 3; +#endif + __raw_writeb(val, (void __iomem *)&pcicptr->g2pcfgdata + offset); +} +static void icd_writew(u16 val, int offset, + struct tx4927_pcic_reg __iomem *pcicptr) +{ +#ifdef __BIG_ENDIAN + offset ^= 2; +#endif + __raw_writew(val, (void __iomem *)&pcicptr->g2pcfgdata + offset); +} +static void icd_writel(u32 val, struct tx4927_pcic_reg __iomem *pcicptr) { - int flags, retval, dev, busno, func; + __raw_writel(val, &pcicptr->g2pcfgdata); +} - busno = bus->number; - dev = PCI_SLOT(devfn); - func = PCI_FUNC(devfn); +static struct tx4927_pcic_reg __iomem *pci_bus_to_pcicptr(struct pci_bus *bus) +{ + struct pci_controller *channel = bus->sysdata; + return get_tx4927_pcicptr(channel); +} - /* check if the bus is top-level */ - if (bus->parent != NULL) { - busno = bus->number; - } else { - busno = 0; - } +static int tx4927_pci_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(bus); - if (mkaddr(busno, devfn, where, &flags)) + if (mkaddr(bus, devfn, where, pcicptr)) { + *val = 0xffffffff; return -1; - + } switch (size) { case 1: - *val = *(volatile u8 *) ((unsigned long) & tx4927_pcicptr-> - g2pcfgdata | -#ifdef __LITTLE_ENDIAN - (where & 3)); -#else - ((where & 0x3) ^ 0x3)); -#endif + *val = icd_readb(where & 3, pcicptr); break; case 2: - *val = *(volatile u16 *) ((unsigned long) & tx4927_pcicptr-> - g2pcfgdata | -#ifdef __LITTLE_ENDIAN - (where & 3)); -#else - ((where & 0x3) ^ 0x2)); -#endif - break; - case 4: - *val = tx4927_pcicptr->g2pcfgdata; + *val = icd_readw(where & 3, pcicptr); break; + default: + *val = icd_readl(pcicptr); } + return check_abort(pcicptr); +} - retval = check_abort(flags); - if (retval == PCIBIOS_DEVICE_NOT_FOUND) - *val = 0xffffffff; +static int tx4927_pci_config_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(bus); - return retval; + if (mkaddr(bus, devfn, where, pcicptr)) + return -1; + switch (size) { + case 1: + icd_writeb(val, where & 3, pcicptr); + break; + case 2: + icd_writew(val, where & 3, pcicptr); + break; + default: + icd_writel(val, pcicptr); + } + return check_abort(pcicptr); } -static int tx4927_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) +static struct pci_ops tx4927_pci_ops = { + .read = tx4927_pci_config_read, + .write = tx4927_pci_config_write, +}; + +static struct { + u8 trdyto; + u8 retryto; + u16 gbwc; +} tx4927_pci_opts __devinitdata = { + .trdyto = 0, + .retryto = 0, + .gbwc = 0xfe0, /* 4064 GBUSCLK for CCFG.GTOT=0b11 */ +}; + +void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, + struct pci_controller *channel, int extarb) { - int flags, dev, busno, func; - busno = bus->number; - dev = PCI_SLOT(devfn); - func = PCI_FUNC(devfn); + int i; + unsigned long flags; - /* check if the bus is top-level */ - if (bus->parent != NULL) { - busno = bus->number; - } else { - busno = 0; - } + set_tx4927_pcicptr(channel, pcicptr); - if (mkaddr(busno, devfn, where, &flags)) - return -1; + if (!channel->pci_ops) + printk(KERN_INFO + "PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", + __raw_readl(&pcicptr->pciid) >> 16, + __raw_readl(&pcicptr->pciid) & 0xffff, + __raw_readl(&pcicptr->pciccrev) & 0xff, + extarb ? "External" : "Internal"); + channel->pci_ops = &tx4927_pci_ops; - switch (size) { - case 1: - *(volatile u8 *) ((unsigned long) & tx4927_pcicptr-> - g2pcfgdata | -#ifdef __LITTLE_ENDIAN - (where & 3)) = val; + local_irq_save(flags); + + /* Disable All Initiator Space */ + __raw_writel(__raw_readl(&pcicptr->pciccfg) + & ~(TX4927_PCIC_PCICCFG_G2PMEN(0) + | TX4927_PCIC_PCICCFG_G2PMEN(1) + | TX4927_PCIC_PCICCFG_G2PMEN(2) + | TX4927_PCIC_PCICCFG_G2PIOEN), + &pcicptr->pciccfg); + + /* GB->PCI mappings */ + __raw_writel((channel->io_resource->end - channel->io_resource->start) + >> 4, + &pcicptr->g2piomask); + ____raw_writeq((channel->io_resource->start + + channel->io_map_base - IO_BASE) | +#ifdef __BIG_ENDIAN + TX4927_PCIC_G2PIOGBASE_ECHG #else - ((where & 0x3) ^ 0x3)) = val; + TX4927_PCIC_G2PIOGBASE_BSDIS #endif - break; - - case 2: - *(volatile u16 *) ((unsigned long) & tx4927_pcicptr-> - g2pcfgdata | -#ifdef __LITTLE_ENDIAN - (where & 3)) = val; + , &pcicptr->g2piogbase); + ____raw_writeq(channel->io_resource->start - channel->io_offset, + &pcicptr->g2piopbase); + for (i = 0; i < 3; i++) { + __raw_writel(0, &pcicptr->g2pmmask[i]); + ____raw_writeq(0, &pcicptr->g2pmgbase[i]); + ____raw_writeq(0, &pcicptr->g2pmpbase[i]); + } + if (channel->mem_resource->end) { + __raw_writel((channel->mem_resource->end + - channel->mem_resource->start) >> 4, + &pcicptr->g2pmmask[0]); + ____raw_writeq(channel->mem_resource->start | +#ifdef __BIG_ENDIAN + TX4927_PCIC_G2PMnGBASE_ECHG #else - ((where & 0x3) ^ 0x2)) = val; + TX4927_PCIC_G2PMnGBASE_BSDIS #endif - break; - case 4: - tx4927_pcicptr->g2pcfgdata = val; - break; + , &pcicptr->g2pmgbase[0]); + ____raw_writeq(channel->mem_resource->start - + channel->mem_offset, + &pcicptr->g2pmpbase[0]); + } + /* PCI->GB mappings (I/O 256B) */ + __raw_writel(0, &pcicptr->p2giopbase); /* 256B */ + ____raw_writeq(0, &pcicptr->p2giogbase); + /* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */ + __raw_writel(0, &pcicptr->p2gm0plbase); + __raw_writel(0, &pcicptr->p2gm0pubase); + ____raw_writeq(TX4927_PCIC_P2GMnGBASE_TMEMEN | +#ifdef __BIG_ENDIAN + TX4927_PCIC_P2GMnGBASE_TECHG +#else + TX4927_PCIC_P2GMnGBASE_TBSDIS +#endif + , &pcicptr->p2gmgbase[0]); + /* PCI->GB mappings (MEM 16MB) */ + __raw_writel(0xffffffff, &pcicptr->p2gm1plbase); + __raw_writel(0xffffffff, &pcicptr->p2gm1pubase); + ____raw_writeq(0, &pcicptr->p2gmgbase[1]); + /* PCI->GB mappings (MEM 1MB) */ + __raw_writel(0xffffffff, &pcicptr->p2gm2pbase); /* 1MB */ + ____raw_writeq(0, &pcicptr->p2gmgbase[2]); + + /* Clear all (including IRBER) except for GBWC */ + __raw_writel((tx4927_pci_opts.gbwc << 16) + & TX4927_PCIC_PCICCFG_GBWC_MASK, + &pcicptr->pciccfg); + /* Enable Initiator Memory Space */ + if (channel->mem_resource->end) + __raw_writel(__raw_readl(&pcicptr->pciccfg) + | TX4927_PCIC_PCICCFG_G2PMEN(0), + &pcicptr->pciccfg); + /* Enable Initiator I/O Space */ + if (channel->io_resource->end) + __raw_writel(__raw_readl(&pcicptr->pciccfg) + | TX4927_PCIC_PCICCFG_G2PIOEN, + &pcicptr->pciccfg); + /* Enable Initiator Config */ + __raw_writel(__raw_readl(&pcicptr->pciccfg) + | TX4927_PCIC_PCICCFG_ICAEN | TX4927_PCIC_PCICCFG_TCAR, + &pcicptr->pciccfg); + + /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ + __raw_writel(0, &pcicptr->pcicfg1); + + __raw_writel((__raw_readl(&pcicptr->g2ptocnt) & ~0xffff) + | (tx4927_pci_opts.trdyto & 0xff) + | ((tx4927_pci_opts.retryto & 0xff) << 8), + &pcicptr->g2ptocnt); + + /* Clear All Local Bus Status */ + __raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus); + /* Enable All Local Bus Interrupts */ + __raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicmask); + /* Clear All Initiator Status */ + __raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus); + /* Enable All Initiator Interrupts */ + __raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pmask); + /* Clear All PCI Status Error */ + __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff) + | (TX4927_PCIC_PCISTATUS_ALL << 16), + &pcicptr->pcistatus); + /* Enable All PCI Status Error Interrupts */ + __raw_writel(TX4927_PCIC_PCISTATUS_ALL, &pcicptr->pcimask); + + if (!extarb) { + /* Reset Bus Arbiter */ + __raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg); + __raw_writel(0, &pcicptr->pbabm); + /* Enable Bus Arbiter */ + __raw_writel(TX4927_PCIC_PBACFG_PBAEN, &pcicptr->pbacfg); } - return check_abort(flags); + __raw_writel(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY + | PCI_COMMAND_PARITY | PCI_COMMAND_SERR, + &pcicptr->pcistatus); + local_irq_restore(flags); + + printk(KERN_DEBUG + "PCI: COMMAND=%04x,PCIMASK=%04x," + "TRDYTO=%02x,RETRYTO=%02x,GBWC=%03x\n", + __raw_readl(&pcicptr->pcistatus) & 0xffff, + __raw_readl(&pcicptr->pcimask) & 0xffff, + __raw_readl(&pcicptr->g2ptocnt) & 0xff, + (__raw_readl(&pcicptr->g2ptocnt) & 0xff00) >> 8, + (__raw_readl(&pcicptr->pciccfg) >> 16) & 0xfff); } -struct pci_ops tx4927_pci_ops = { - tx4927_pcibios_read_config, - tx4927_pcibios_write_config -}; +static void tx4927_report_pcic_status1(struct tx4927_pcic_reg __iomem *pcicptr) +{ + __u16 pcistatus = (__u16)(__raw_readl(&pcicptr->pcistatus) >> 16); + __u32 g2pstatus = __raw_readl(&pcicptr->g2pstatus); + __u32 pcicstatus = __raw_readl(&pcicptr->pcicstatus); + static struct { + __u32 flag; + const char *str; + } pcistat_tbl[] = { + { PCI_STATUS_DETECTED_PARITY, "DetectedParityError" }, + { PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" }, + { PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" }, + { PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" }, + { PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" }, + { PCI_STATUS_PARITY, "MasterParityError" }, + }, g2pstat_tbl[] = { + { TX4927_PCIC_G2PSTATUS_TTOE, "TIOE" }, + { TX4927_PCIC_G2PSTATUS_RTOE, "RTOE" }, + }, pcicstat_tbl[] = { + { TX4927_PCIC_PCICSTATUS_PME, "PME" }, + { TX4927_PCIC_PCICSTATUS_TLB, "TLB" }, + { TX4927_PCIC_PCICSTATUS_NIB, "NIB" }, + { TX4927_PCIC_PCICSTATUS_ZIB, "ZIB" }, + { TX4927_PCIC_PCICSTATUS_PERR, "PERR" }, + { TX4927_PCIC_PCICSTATUS_SERR, "SERR" }, + { TX4927_PCIC_PCICSTATUS_GBE, "GBE" }, + { TX4927_PCIC_PCICSTATUS_IWB, "IWB" }, + }; + int i, cont; -/* - * h/w only supports devices 0x00 to 0x14 - */ -struct pci_controller tx4927_controller = { - .pci_ops = &tx4927_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; + printk(KERN_ERR ""); + if (pcistatus & TX4927_PCIC_PCISTATUS_ALL) { + printk(KERN_CONT "pcistat:%04x(", pcistatus); + for (i = 0, cont = 0; i < ARRAY_SIZE(pcistat_tbl); i++) + if (pcistatus & pcistat_tbl[i].flag) + printk(KERN_CONT "%s%s", + cont++ ? " " : "", pcistat_tbl[i].str); + printk(KERN_CONT ") "); + } + if (g2pstatus & TX4927_PCIC_G2PSTATUS_ALL) { + printk(KERN_CONT "g2pstatus:%08x(", g2pstatus); + for (i = 0, cont = 0; i < ARRAY_SIZE(g2pstat_tbl); i++) + if (g2pstatus & g2pstat_tbl[i].flag) + printk(KERN_CONT "%s%s", + cont++ ? " " : "", g2pstat_tbl[i].str); + printk(KERN_CONT ") "); + } + if (pcicstatus & TX4927_PCIC_PCICSTATUS_ALL) { + printk(KERN_CONT "pcicstatus:%08x(", pcicstatus); + for (i = 0, cont = 0; i < ARRAY_SIZE(pcicstat_tbl); i++) + if (pcicstatus & pcicstat_tbl[i].flag) + printk(KERN_CONT "%s%s", + cont++ ? " " : "", pcicstat_tbl[i].str); + printk(KERN_CONT ")"); + } + printk(KERN_CONT "\n"); +} + +void tx4927_report_pcic_status(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) { + if (pcicptrs[i].pcicptr) + tx4927_report_pcic_status1(pcicptrs[i].pcicptr); + } +} diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c deleted file mode 100644 index 34494b82cb22..000000000000 --- a/arch/mips/pci/ops-tx4938.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Define the pci_ops for the Toshiba rbtx4938 - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include - -#include -#include - -/* initialize in setup */ -struct resource pci_io_resource = { - .name = "pci IO space", - .start = 0, - .end = 0, - .flags = IORESOURCE_IO -}; - -/* initialize in setup */ -struct resource pci_mem_resource = { - .name = "pci memory space", - .start = 0, - .end = 0, - .flags = IORESOURCE_MEM -}; - -struct resource tx4938_pcic1_pci_io_resource = { - .name = "PCI1 IO", - .start = 0, - .end = 0, - .flags = IORESOURCE_IO -}; -struct resource tx4938_pcic1_pci_mem_resource = { - .name = "PCI1 mem", - .start = 0, - .end = 0, - .flags = IORESOURCE_MEM -}; - -static int mkaddr(int bus, int dev_fn, int where, - struct tx4938_pcic_reg *pcicptr) -{ - if (bus > 0) { - /* Type 1 configuration */ - pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | - ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1; - } else { - if (dev_fn >= PCI_DEVFN(TX4938_PCIC_MAX_DEVNU, 0)) - return -1; - - /* Type 0 configuration */ - pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | - ((dev_fn & 0xff) << 0x08) | (where & 0xfc); - } - /* clear M_ABORT and Disable M_ABORT Int. */ - pcicptr->pcistatus = - (pcicptr->pcistatus & 0x0000ffff) | - (PCI_STATUS_REC_MASTER_ABORT << 16); - pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT; - - return 0; -} - -static int check_abort(struct tx4938_pcic_reg *pcicptr) -{ - int code = PCIBIOS_SUCCESSFUL; - /* wait write cycle completion before checking error status */ - while (pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB) - ; - if (pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) { - pcicptr->pcistatus = - (pcicptr-> - pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT - << 16); - pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT; - code = PCIBIOS_DEVICE_NOT_FOUND; - } - return code; -} - -extern struct pci_controller tx4938_pci_controller[]; -extern struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch); - -static struct tx4938_pcic_reg *pci_bus_to_pcicptr(struct pci_bus *bus) -{ - struct pci_controller *channel = bus->sysdata; - return get_tx4938_pcicptr(channel - &tx4938_pci_controller[0]); -} - -static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 * val) -{ - int retval, dev, busno, func; - struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus); - void __iomem *cfgdata = - (void __iomem *)(unsigned long)&pcicptr->g2pcfgdata; - - dev = PCI_SLOT(devfn); - func = PCI_FUNC(devfn); - - /* check if the bus is top-level */ - if (bus->parent != NULL) - busno = bus->number; - else { - busno = 0; - } - - if (mkaddr(busno, devfn, where, pcicptr)) - return -1; - - switch (size) { - case 1: -#ifdef __BIG_ENDIAN - cfgdata += (where & 3) ^ 3; -#else - cfgdata += where & 3; -#endif - *val = __raw_readb(cfgdata); - break; - case 2: -#ifdef __BIG_ENDIAN - cfgdata += (where & 2) ^ 2; -#else - cfgdata += where & 2; -#endif - *val = __raw_readw(cfgdata); - break; - case 4: - *val = __raw_readl(cfgdata); - break; - } - - retval = check_abort(pcicptr); - if (retval == PCIBIOS_DEVICE_NOT_FOUND) - *val = 0xffffffff; - - return retval; -} - -static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - int dev, busno, func; - struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus); - void __iomem *cfgdata = - (void __iomem *)(unsigned long)&pcicptr->g2pcfgdata; - - busno = bus->number; - dev = PCI_SLOT(devfn); - func = PCI_FUNC(devfn); - - /* check if the bus is top-level */ - if (bus->parent != NULL) { - busno = bus->number; - } else { - busno = 0; - } - - if (mkaddr(busno, devfn, where, pcicptr)) - return -1; - - switch (size) { - case 1: -#ifdef __BIG_ENDIAN - cfgdata += (where & 3) ^ 3; -#else - cfgdata += where & 3; -#endif - __raw_writeb(val, cfgdata); - break; - case 2: -#ifdef __BIG_ENDIAN - cfgdata += (where & 2) ^ 2; -#else - cfgdata += where & 2; -#endif - __raw_writew(val, cfgdata); - break; - case 4: - __raw_writel(val, cfgdata); - break; - } - - return check_abort(pcicptr); -} - -struct pci_ops tx4938_pci_ops = { - tx4938_pcibios_read_config, - tx4938_pcibios_write_config -}; - -struct pci_controller tx4938_pci_controller[] = { - /* h/w only supports devices 0x00 to 0x14 */ - { - .pci_ops = &tx4938_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, - }, - /* h/w only supports devices 0x00 to 0x14 */ - { - .pci_ops = &tx4938_pci_ops, - .io_resource = &tx4938_pcic1_pci_io_resource, - .mem_resource = &tx4938_pcic1_pci_mem_resource, - } -}; diff --git a/arch/mips/pci/pci-jmr3927.c b/arch/mips/pci/pci-jmr3927.c deleted file mode 100644 index 7fb6bd71901a..000000000000 --- a/arch/mips/pci/pci-jmr3927.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * Copyright (C) 2000-2001 Toshiba Corporation - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include - -#include -#include - -struct resource pci_io_resource = { - .name = "IO MEM", - .start = 0x1000, /* reserve regacy I/O space */ - .end = 0x1000 + JMR3927_PCIIO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -struct resource pci_mem_resource = { - .name = "PCI MEM", - .start = JMR3927_PCIMEM, - .end = JMR3927_PCIMEM + JMR3927_PCIMEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops jmr3927_pci_ops; - -struct pci_controller jmr3927_controller = { - .pci_ops = &jmr3927_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, - .mem_offset = JMR3927_PCIMEM -}; diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c new file mode 100644 index 000000000000..27e86a09dd41 --- /dev/null +++ b/arch/mips/pci/pci-tx4927.c @@ -0,0 +1,83 @@ +/* + * linux/arch/mips/pci/pci-tx4927.c + * + * Based on linux/arch/mips/txx9/rbtx4938/setup.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright 2001, 2003-2005 MontaVista Software Inc. + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +int __init tx4927_report_pciclk(void) +{ + int pciclk = 0; + + printk(KERN_INFO "PCIC --%s PCICLK:", + (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66) ? + " PCI66" : ""); + if (__raw_readq(&tx4927_ccfgptr->pcfg) & TX4927_PCFG_PCICLKEN_ALL) { + u64 ccfg = __raw_readq(&tx4927_ccfgptr->ccfg); + switch ((unsigned long)ccfg & + TX4927_CCFG_PCIDIVMODE_MASK) { + case TX4927_CCFG_PCIDIVMODE_2_5: + pciclk = txx9_cpu_clock * 2 / 5; break; + case TX4927_CCFG_PCIDIVMODE_3: + pciclk = txx9_cpu_clock / 3; break; + case TX4927_CCFG_PCIDIVMODE_5: + pciclk = txx9_cpu_clock / 5; break; + case TX4927_CCFG_PCIDIVMODE_6: + pciclk = txx9_cpu_clock / 6; break; + } + printk("Internal(%u.%uMHz)", + (pciclk + 50000) / 1000000, + ((pciclk + 50000) / 100000) % 10); + } else { + printk("External"); + pciclk = -1; + } + printk("\n"); + return pciclk; +} + +int __init tx4927_pciclk66_setup(void) +{ + int pciclk; + + /* Assert M66EN */ + tx4927_ccfg_set(TX4927_CCFG_PCI66); + /* Double PCICLK (if possible) */ + if (__raw_readq(&tx4927_ccfgptr->pcfg) & TX4927_PCFG_PCICLKEN_ALL) { + unsigned int pcidivmode = 0; + u64 ccfg = __raw_readq(&tx4927_ccfgptr->ccfg); + pcidivmode = (unsigned long)ccfg & + TX4927_CCFG_PCIDIVMODE_MASK; + switch (pcidivmode) { + case TX4927_CCFG_PCIDIVMODE_5: + case TX4927_CCFG_PCIDIVMODE_2_5: + pcidivmode = TX4927_CCFG_PCIDIVMODE_2_5; + pciclk = txx9_cpu_clock * 2 / 5; + break; + case TX4927_CCFG_PCIDIVMODE_6: + case TX4927_CCFG_PCIDIVMODE_3: + default: + pcidivmode = TX4927_CCFG_PCIDIVMODE_3; + pciclk = txx9_cpu_clock / 3; + } + tx4927_ccfg_change(TX4927_CCFG_PCIDIVMODE_MASK, + pcidivmode); + printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n", + (unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg)); + } else + pciclk = -1; + return pciclk; +} diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c new file mode 100644 index 000000000000..e5375511c2b7 --- /dev/null +++ b/arch/mips/pci/pci-tx4938.c @@ -0,0 +1,134 @@ +/* + * linux/arch/mips/pci/pci-tx4938.c + * + * Based on linux/arch/mips/txx9/rbtx4938/setup.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright 2001, 2003-2005 MontaVista Software Inc. + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +int __init tx4938_report_pciclk(void) +{ + int pciclk = 0; + + printk(KERN_INFO "PCIC --%s PCICLK:", + (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) ? + " PCI66" : ""); + if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_PCICLKEN_ALL) { + u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg); + switch ((unsigned long)ccfg & + TX4938_CCFG_PCIDIVMODE_MASK) { + case TX4938_CCFG_PCIDIVMODE_4: + pciclk = txx9_cpu_clock / 4; break; + case TX4938_CCFG_PCIDIVMODE_4_5: + pciclk = txx9_cpu_clock * 2 / 9; break; + case TX4938_CCFG_PCIDIVMODE_5: + pciclk = txx9_cpu_clock / 5; break; + case TX4938_CCFG_PCIDIVMODE_5_5: + pciclk = txx9_cpu_clock * 2 / 11; break; + case TX4938_CCFG_PCIDIVMODE_8: + pciclk = txx9_cpu_clock / 8; break; + case TX4938_CCFG_PCIDIVMODE_9: + pciclk = txx9_cpu_clock / 9; break; + case TX4938_CCFG_PCIDIVMODE_10: + pciclk = txx9_cpu_clock / 10; break; + case TX4938_CCFG_PCIDIVMODE_11: + pciclk = txx9_cpu_clock / 11; break; + } + printk("Internal(%u.%uMHz)", + (pciclk + 50000) / 1000000, + ((pciclk + 50000) / 100000) % 10); + } else { + printk("External"); + pciclk = -1; + } + printk("\n"); + return pciclk; +} + +void __init tx4938_report_pci1clk(void) +{ + __u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg); + unsigned int pciclk = + txx9_gbus_clock / ((ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2); + + printk(KERN_INFO "PCIC1 -- %sPCICLK:%u.%uMHz\n", + (ccfg & TX4938_CCFG_PCI1_66) ? "PCI66 " : "", + (pciclk + 50000) / 1000000, + ((pciclk + 50000) / 100000) % 10); +} + +int __init tx4938_pciclk66_setup(void) +{ + int pciclk; + + /* Assert M66EN */ + tx4938_ccfg_set(TX4938_CCFG_PCI66); + /* Double PCICLK (if possible) */ + if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_PCICLKEN_ALL) { + unsigned int pcidivmode = 0; + u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg); + pcidivmode = (unsigned long)ccfg & + TX4938_CCFG_PCIDIVMODE_MASK; + switch (pcidivmode) { + case TX4938_CCFG_PCIDIVMODE_8: + case TX4938_CCFG_PCIDIVMODE_4: + pcidivmode = TX4938_CCFG_PCIDIVMODE_4; + pciclk = txx9_cpu_clock / 4; + break; + case TX4938_CCFG_PCIDIVMODE_9: + case TX4938_CCFG_PCIDIVMODE_4_5: + pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5; + pciclk = txx9_cpu_clock * 2 / 9; + break; + case TX4938_CCFG_PCIDIVMODE_10: + case TX4938_CCFG_PCIDIVMODE_5: + pcidivmode = TX4938_CCFG_PCIDIVMODE_5; + pciclk = txx9_cpu_clock / 5; + break; + case TX4938_CCFG_PCIDIVMODE_11: + case TX4938_CCFG_PCIDIVMODE_5_5: + default: + pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5; + pciclk = txx9_cpu_clock * 2 / 11; + break; + } + tx4938_ccfg_change(TX4938_CCFG_PCIDIVMODE_MASK, + pcidivmode); + printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n", + (unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg)); + } else + pciclk = -1; + return pciclk; +} + +int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot) +{ + if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4938_pcic1ptr) { + switch (slot) { + case TX4927_PCIC_IDSEL_AD_TO_SLOT(31): + if (__raw_readq(&tx4938_ccfgptr->pcfg) & + TX4938_PCFG_ETH0_SEL) + return TXX9_IRQ_BASE + TX4938_IR_ETH0; + break; + case TX4927_PCIC_IDSEL_AD_TO_SLOT(30): + if (__raw_readq(&tx4938_ccfgptr->pcfg) & + TX4938_PCFG_ETH1_SEL) + return TXX9_IRQ_BASE + TX4938_IR_ETH1; + break; + } + return 0; + } + return -1; +} diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 98d103402b10..b8cdb192543a 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -1,6 +1,12 @@ config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" - depends on TOSHIBA_RBTX4927 + depends on PCI && (SYS_HAS_CPU_TX49XX || SYS_HAS_CPU_TX39XX) + select I8259 + +config PICMG_PCI_BACKPLANE_DEFAULT + bool "Support for PICMG PCI Backplane" + depends on PCI && (SYS_HAS_CPU_TX49XX || SYS_HAS_CPU_TX39XX) + default y if !TOSHIBA_FPCIB0 if TOSHIBA_RBTX4938 @@ -26,3 +32,6 @@ config TX4938_NAND_BOOT Select this option if you need to use NAND boot. endif + +config PCI_TX4927 + bool diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index 8cb4a7e81473..b80b6e072284 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -2,6 +2,8 @@ # Makefile for common code for TXx9 based systems # +obj-y += setup.o +obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_TOSHIBA_RBTX4927) += mem_tx4927.o irq_tx4927.o obj-$(CONFIG_TOSHIBA_RBTX4938) += mem_tx4938.o irq_tx4938.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c new file mode 100644 index 000000000000..8173faab99bb --- /dev/null +++ b/arch/mips/txx9/generic/pci.c @@ -0,0 +1,377 @@ +/* + * linux/arch/mips/txx9/pci.c + * + * Based on linux/arch/mips/txx9/rbtx4927/setup.c, + * linux/arch/mips/txx9/rbtx4938/setup.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright 2001-2005 MontaVista Software Inc. + * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org) + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#ifdef CONFIG_TOSHIBA_FPCIB0 +#include +#include +#include +#endif + +static int __init +early_read_config_word(struct pci_controller *hose, + int top_bus, int bus, int devfn, int offset, u16 *value) +{ + struct pci_dev fake_dev; + struct pci_bus fake_bus; + + fake_dev.bus = &fake_bus; + fake_dev.sysdata = hose; + fake_dev.devfn = devfn; + fake_bus.number = bus; + fake_bus.sysdata = hose; + fake_bus.ops = hose->pci_ops; + + if (bus != top_bus) + /* Fake a parent bus structure. */ + fake_bus.parent = &fake_bus; + else + fake_bus.parent = NULL; + + return pci_read_config_word(&fake_dev, offset, value); +} + +int __init txx9_pci66_check(struct pci_controller *hose, int top_bus, + int current_bus) +{ + u32 pci_devfn; + unsigned short vid; + int cap66 = -1; + u16 stat; + + /* It seems SLC90E66 needs some time after PCI reset... */ + mdelay(80); + + printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n"); + + for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { + if (PCI_FUNC(pci_devfn)) + continue; + if (early_read_config_word(hose, top_bus, current_bus, + pci_devfn, PCI_VENDOR_ID, &vid) != + PCIBIOS_SUCCESSFUL) + continue; + if (vid == 0xffff) + continue; + + /* check 66MHz capability */ + if (cap66 < 0) + cap66 = 1; + if (cap66) { + early_read_config_word(hose, top_bus, current_bus, + pci_devfn, PCI_STATUS, &stat); + if (!(stat & PCI_STATUS_66MHZ)) { + printk(KERN_DEBUG + "PCI: %02x:%02x not 66MHz capable.\n", + current_bus, pci_devfn); + cap66 = 0; + break; + } + } + } + return cap66 > 0; +} + +static struct resource primary_pci_mem_res[2] = { + { .name = "PCI MEM" }, + { .name = "PCI MMIO" }, +}; +static struct resource primary_pci_io_res = { .name = "PCI IO" }; +struct pci_controller txx9_primary_pcic = { + .mem_resource = &primary_pci_mem_res[0], + .io_resource = &primary_pci_io_res, +}; + +#ifdef CONFIG_64BIT +int txx9_pci_mem_high __initdata = 1; +#else +int txx9_pci_mem_high __initdata; +#endif + +/* + * allocate pci_controller and resources. + * mem_base, io_base: physical addresss. 0 for auto assignment. + * mem_size and io_size means max size on auto assignment. + * pcic must be &txx9_primary_pcic or NULL. + */ +struct pci_controller *__init +txx9_alloc_pci_controller(struct pci_controller *pcic, + unsigned long mem_base, unsigned long mem_size, + unsigned long io_base, unsigned long io_size) +{ + struct pcic { + struct pci_controller c; + struct resource r_mem[2]; + struct resource r_io; + } *new = NULL; + int min_size = 0x10000; + + if (!pcic) { + new = kzalloc(sizeof(*new), GFP_KERNEL); + if (!new) + return NULL; + new->r_mem[0].name = "PCI mem"; + new->r_mem[1].name = "PCI mmio"; + new->r_io.name = "PCI io"; + new->c.mem_resource = new->r_mem; + new->c.io_resource = &new->r_io; + pcic = &new->c; + } else + BUG_ON(pcic != &txx9_primary_pcic); + pcic->io_resource->flags = IORESOURCE_IO; + + /* + * for auto assignment, first search a (big) region for PCI + * MEM, then search a region for PCI IO. + */ + if (mem_base) { + pcic->mem_resource[0].start = mem_base; + pcic->mem_resource[0].end = mem_base + mem_size - 1; + if (request_resource(&iomem_resource, &pcic->mem_resource[0])) + goto free_and_exit; + } else { + unsigned long min = 0, max = 0x20000000; /* low 512MB */ + if (!mem_size) { + /* default size for auto assignment */ + if (txx9_pci_mem_high) + mem_size = 0x20000000; /* mem:512M(max) */ + else + mem_size = 0x08000000; /* mem:128M(max) */ + } + if (txx9_pci_mem_high) { + min = 0x20000000; + max = 0xe0000000; + } + /* search free region for PCI MEM */ + for (; mem_size >= min_size; mem_size /= 2) { + if (allocate_resource(&iomem_resource, + &pcic->mem_resource[0], + mem_size, min, max, + mem_size, NULL, NULL) == 0) + break; + } + if (mem_size < min_size) + goto free_and_exit; + } + + pcic->mem_resource[1].flags = IORESOURCE_MEM | IORESOURCE_BUSY; + if (io_base) { + pcic->mem_resource[1].start = io_base; + pcic->mem_resource[1].end = io_base + io_size - 1; + if (request_resource(&iomem_resource, &pcic->mem_resource[1])) + goto release_and_exit; + } else { + if (!io_size) + /* default size for auto assignment */ + io_size = 0x01000000; /* io:16M(max) */ + /* search free region for PCI IO in low 512MB */ + for (; io_size >= min_size; io_size /= 2) { + if (allocate_resource(&iomem_resource, + &pcic->mem_resource[1], + io_size, 0, 0x20000000, + io_size, NULL, NULL) == 0) + break; + } + if (io_size < min_size) + goto release_and_exit; + io_base = pcic->mem_resource[1].start; + } + + pcic->mem_resource[0].flags = IORESOURCE_MEM; + if (pcic == &txx9_primary_pcic && + mips_io_port_base == (unsigned long)-1) { + /* map ioport 0 to PCI I/O space address 0 */ + set_io_port_base(IO_BASE + pcic->mem_resource[1].start); + pcic->io_resource->start = 0; + pcic->io_offset = 0; /* busaddr == ioaddr */ + pcic->io_map_base = IO_BASE + pcic->mem_resource[1].start; + } else { + /* physaddr to ioaddr */ + pcic->io_resource->start = + io_base - (mips_io_port_base - IO_BASE); + pcic->io_offset = io_base - (mips_io_port_base - IO_BASE); + pcic->io_map_base = mips_io_port_base; + } + pcic->io_resource->end = pcic->io_resource->start + io_size - 1; + + pcic->mem_offset = 0; /* busaddr == physaddr */ + + printk(KERN_INFO "PCI: IO 0x%08llx-0x%08llx MEM 0x%08llx-0x%08llx\n", + (unsigned long long)pcic->mem_resource[1].start, + (unsigned long long)pcic->mem_resource[1].end, + (unsigned long long)pcic->mem_resource[0].start, + (unsigned long long)pcic->mem_resource[0].end); + + /* register_pci_controller() will request MEM resource */ + release_resource(&pcic->mem_resource[0]); + return pcic; + release_and_exit: + release_resource(&pcic->mem_resource[0]); + free_and_exit: + kfree(new); + printk(KERN_ERR "PCI: Failed to allocate resources.\n"); + return NULL; +} + +static int __init +txx9_arch_pci_init(void) +{ + PCIBIOS_MIN_IO = 0x8000; /* reseve legacy I/O space */ + return 0; +} +arch_initcall(txx9_arch_pci_init); + +/* IRQ/IDSEL mapping */ +int txx9_pci_option = +#ifdef CONFIG_PICMG_PCI_BACKPLANE_DEFAULT + TXX9_PCI_OPT_PICMG | +#endif + TXX9_PCI_OPT_CLK_AUTO; + +enum txx9_pci_err_action txx9_pci_err_action = TXX9_PCI_ERR_REPORT; + +#ifdef CONFIG_TOSHIBA_FPCIB0 +static irqreturn_t i8259_interrupt(int irq, void *dev_id) +{ + int isairq; + + isairq = i8259_irq(); + if (unlikely(isairq <= I8259A_IRQ_BASE)) + return IRQ_NONE; + generic_handle_irq(isairq); + return IRQ_HANDLED; +} + +static int __init +txx9_i8259_irq_setup(int irq) +{ + int err; + + init_i8259_irqs(); + err = request_irq(irq, &i8259_interrupt, IRQF_DISABLED|IRQF_SHARED, + "cascade(i8259)", (void *)(long)irq); + if (!err) + printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq); + return err; +} + +static void __init quirk_slc90e66_bridge(struct pci_dev *dev) +{ + int irq; /* PCI/ISA Bridge interrupt */ + u8 reg_64; + u32 reg_b0; + u8 reg_e1; + irq = pcibios_map_irq(dev, PCI_SLOT(dev->devfn), 1); /* INTA */ + if (!irq) + return; + txx9_i8259_irq_setup(irq); + pci_read_config_byte(dev, 0x64, ®_64); + pci_read_config_dword(dev, 0xb0, ®_b0); + pci_read_config_byte(dev, 0xe1, ®_e1); + /* serial irq control */ + reg_64 = 0xd0; + /* serial irq pin */ + reg_b0 |= 0x00010000; + /* ide irq on isa14 */ + reg_e1 &= 0xf0; + reg_e1 |= 0x0d; + pci_write_config_byte(dev, 0x64, reg_64); + pci_write_config_dword(dev, 0xb0, reg_b0); + pci_write_config_byte(dev, 0xe1, reg_e1); + + smsc_fdc37m81x_init(0x3f0); + smsc_fdc37m81x_config_beg(); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, + SMSC_FDC37M81X_KBD); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, + 1); + smsc_fdc37m81x_config_end(); +} + +static void quirk_slc90e66_ide(struct pci_dev *dev) +{ + unsigned char dat; + int regs[2] = {0x41, 0x43}; + int i; + + /* SMSC SLC90E66 IDE uses irq 14, 15 (default) */ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14); + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat); + printk(KERN_INFO "PCI: %s: IRQ %02x", pci_name(dev), dat); + /* enable SMSC SLC90E66 IDE */ + for (i = 0; i < ARRAY_SIZE(regs); i++) { + pci_read_config_byte(dev, regs[i], &dat); + pci_write_config_byte(dev, regs[i], dat | 0x80); + pci_read_config_byte(dev, regs[i], &dat); + printk(KERN_CONT " IDETIM%d %02x", i, dat); + } + pci_read_config_byte(dev, 0x5c, &dat); + /* + * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! + * + * This line of code is intended to provide the user with a work + * around solution to the anomalies cited in SMSC's anomaly sheet + * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"". + * + * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! + */ + dat |= 0x01; + pci_write_config_byte(dev, regs[i], dat); + pci_read_config_byte(dev, 0x5c, &dat); + printk(KERN_CONT " REG5C %02x", dat); + printk(KERN_CONT "\n"); +} +#endif /* CONFIG_TOSHIBA_FPCIB0 */ + +static void final_fixup(struct pci_dev *dev) +{ + unsigned char bist; + + /* Do build-in self test */ + if (pci_read_config_byte(dev, PCI_BIST, &bist) == PCIBIOS_SUCCESSFUL && + (bist & PCI_BIST_CAPABLE)) { + unsigned long timeout; + pci_set_power_state(dev, PCI_D0); + printk(KERN_INFO "PCI: %s BIST...", pci_name(dev)); + pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START); + timeout = jiffies + HZ * 2; /* timeout after 2 sec */ + do { + pci_read_config_byte(dev, PCI_BIST, &bist); + if (time_after(jiffies, timeout)) + break; + } while (bist & PCI_BIST_START); + if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START)) + printk(KERN_CONT "failed. (0x%x)\n", bist); + else + printk(KERN_CONT "OK.\n"); + } +} + +#ifdef CONFIG_TOSHIBA_FPCIB0 +#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460 +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0, + quirk_slc90e66_bridge); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, + quirk_slc90e66_ide); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, + quirk_slc90e66_ide); +#endif +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup); +DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup); diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c new file mode 100644 index 000000000000..46a631177757 --- /dev/null +++ b/arch/mips/txx9/generic/setup.c @@ -0,0 +1,51 @@ +/* + * linux/arch/mips/txx9/generic/setup.c + * + * Based on linux/arch/mips/txx9/rbtx4938/setup.c, + * and RBTX49xx patch from CELF patch archive. + * + * 2003-2005 (c) MontaVista Software, Inc. + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +/* EBUSC settings of TX4927, etc. */ +struct resource txx9_ce_res[8]; +static char txx9_ce_res_name[8][4]; /* "CEn" */ + +/* pcode, internal register */ +char txx9_pcode_str[8]; +static struct resource txx9_reg_res = { + .name = txx9_pcode_str, + .flags = IORESOURCE_MEM, +}; +void __init +txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(txx9_ce_res); i++) { + sprintf(txx9_ce_res_name[i], "CE%d", i); + txx9_ce_res[i].flags = IORESOURCE_MEM; + txx9_ce_res[i].name = txx9_ce_res_name[i]; + } + + sprintf(txx9_pcode_str, "TX%x", pcode); + if (base) { + txx9_reg_res.start = base & 0xfffffffffULL; + txx9_reg_res.end = (base & 0xfffffffffULL) + (size - 1); + request_resource(&iomem_resource, &txx9_reg_res); + } +} + +/* clocks */ +unsigned int txx9_master_clock; +unsigned int txx9_cpu_clock; +unsigned int txx9_gbus_clock; diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c index 85e1daf15c7b..b97d22e15da6 100644 --- a/arch/mips/txx9/jmr3927/irq.c +++ b/arch/mips/txx9/jmr3927/irq.c @@ -109,6 +109,7 @@ static struct irqaction ioc_action = { .name = "IOC", }; +#ifdef CONFIG_PCI static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id) { printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq); @@ -122,6 +123,7 @@ static struct irqaction pcierr_action = { .mask = CPU_MASK_NONE, .name = "PCI error", }; +#endif static void __init jmr3927_irq_init(void); diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 41e0f3b3af2c..baa8c8db9a94 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include @@ -44,6 +43,7 @@ #include #include #include +#include #include #include @@ -96,8 +96,6 @@ void __init plat_time_init(void) extern char * __init prom_getcmdline(void); static void jmr3927_board_init(void); -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; void __init plat_mem_setup(void) { @@ -112,8 +110,8 @@ void __init plat_mem_setup(void) /* * IO/MEM resources. */ - ioport_resource.start = pci_io_resource.start; - ioport_resource.end = pci_io_resource.end; + ioport_resource.start = 0; + ioport_resource.end = 0xffffffff; iomem_resource.start = 0; iomem_resource.end = 0xffffffff; @@ -191,9 +189,33 @@ void __init plat_mem_setup(void) static void tx3927_setup(void); +static void __init jmr3927_pci_setup(void) +{ +#ifdef CONFIG_PCI + int extarb = !(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB); + struct pci_controller *c; + + c = txx9_alloc_pci_controller(&txx9_primary_pcic, + JMR3927_PCIMEM, JMR3927_PCIMEM_SIZE, + JMR3927_PCIIO, JMR3927_PCIIO_SIZE); + register_pci_controller(c); + if (!extarb) { + /* Reset PCI Bus */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + udelay(100); + jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, + JMR3927_IOC_RESET_ADDR); + udelay(100); + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + } + tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb); +#endif /* CONFIG_PCI */ +} + static void __init jmr3927_board_init(void) { tx3927_setup(); + jmr3927_pci_setup(); /* SIO0 DTR on */ jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); @@ -210,14 +232,6 @@ static void __init jmr3927_board_init(void) static void __init tx3927_setup(void) { int i; -#ifdef CONFIG_PCI - unsigned long mips_pci_io_base = JMR3927_PCIIO; - unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE; - unsigned long mips_pci_mem_base = JMR3927_PCIMEM; - unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE; - /* for legacy I/O, PCI I/O PCI Bus address must be 0 */ - unsigned long mips_pci_io_pciaddr = 0; -#endif /* SDRAMC are configured by PROM */ @@ -272,74 +286,6 @@ static void __init tx3927_setup(void) tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; #endif -#ifdef CONFIG_PCI - /* PCIC */ - printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:", - tx3927_pcicptr->did, tx3927_pcicptr->vid, - tx3927_pcicptr->rid); - if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) { - printk("External\n"); - /* XXX */ - } else { - printk("Internal\n"); - - /* Reset PCI Bus */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - udelay(100); - jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, - JMR3927_IOC_RESET_ADDR); - udelay(100); - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - - - /* Disable External PCI Config. Access */ - tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD; -#ifdef __BIG_ENDIAN - tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE | - TX3927_PCIC_LBC_TIBSE | - TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE; -#endif - /* LB->PCI mappings */ - tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1); - tx3927_pcicptr->ilbioma = mips_pci_io_base; - tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr; - tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1); - tx3927_pcicptr->ilbmma = mips_pci_mem_base; - tx3927_pcicptr->ipbmma = mips_pci_mem_base; - /* PCI->LB mappings */ - tx3927_pcicptr->iobas = 0xffffffff; - tx3927_pcicptr->ioba = 0; - tx3927_pcicptr->tlbioma = 0; - tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1); - tx3927_pcicptr->mba = 0; - tx3927_pcicptr->tlbmma = 0; - /* Enable Direct mapping Address Space Decoder */ - tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE; - - /* Clear All Local Bus Status */ - tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL; - /* Enable All Local Bus Interrupts */ - tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL; - /* Clear All PCI Status Error */ - tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL; - /* Enable All PCI Status Error Interrupts */ - tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL; - - /* PCIC Int => IRC IRQ10 */ - tx3927_pcicptr->il = TX3927_IR_PCI; - /* Target Control (per errata) */ - tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E; - - /* Enable Bus Arbiter */ - tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN; - - tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | - PCI_COMMAND_IO | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - } -#endif /* CONFIG_PCI */ - /* PIO */ /* PIO[15:12] connected to LEDs */ __raw_writel(0x0000f000, &tx3927_pioptr->dir); diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c index 936e50e91d95..bef1447aeed2 100644 --- a/arch/mips/txx9/rbtx4927/irq.c +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -111,9 +111,6 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB #include #include #include -#ifdef CONFIG_TOSHIBA_FPCIB0 -#include -#endif #include #define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG 0 @@ -125,8 +122,6 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB #define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC #define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2) -extern int tx4927_using_backplane; - static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq); static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq); @@ -146,17 +141,8 @@ int toshiba_rbtx4927_irq_nested(int sw_irq) u8 level3; level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f; - if (level3) { + if (level3) sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + fls(level3) - 1; -#ifdef CONFIG_TOSHIBA_FPCIB0 - if (sw_irq == TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC && - tx4927_using_backplane) { - int irq = i8259_irq(); - if (irq >= 0) - sw_irq = irq; - } -#endif - } return (sw_irq); } @@ -205,10 +191,6 @@ void __init arch_init_irq(void) tx4927_irq_init(); toshiba_rbtx4927_irq_ioc_init(); -#ifdef CONFIG_TOSHIBA_FPCIB0 - if (tx4927_using_backplane) - init_i8259_irqs(); -#endif /* Onboard 10M Ether: High Active */ set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH); } diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index df1b6e99b666..86b870abc319 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -47,10 +47,10 @@ #include #include #include -#include #include #include #include +#include #include #include @@ -58,10 +58,10 @@ #include #include #include -#ifdef CONFIG_TOSHIBA_FPCIB0 -#include -#endif +#include +#include #include +#include /* for TX4937 */ #ifdef CONFIG_SERIAL_TXX9 #include #endif @@ -70,356 +70,116 @@ extern void toshiba_rbtx4927_restart(char *command); extern void toshiba_rbtx4927_halt(void); extern void toshiba_rbtx4927_power_off(void); - -int tx4927_using_backplane = 0; - extern void toshiba_rbtx4927_irq_setup(void); char *prom_getcmdline(void); -#ifdef CONFIG_PCI -#undef TX4927_SUPPORT_COMMAND_IO -#undef TX4927_SUPPORT_PCI_66 -int tx4927_cpu_clock = 100000000; /* 100MHz */ -unsigned long mips_pci_io_base; -unsigned long mips_pci_io_size; -unsigned long mips_pci_mem_base; -unsigned long mips_pci_mem_size; -/* for legacy I/O, PCI I/O PCI Bus address must be 0 */ -unsigned long mips_pci_io_pciaddr = 0; -unsigned long mips_memory_upper; static int tx4927_ccfg_toeon = 1; -static int tx4927_pcic_trdyto = 0; /* default: disabled */ -unsigned long tx4927_ce_base[8]; -int tx4927_pci66 = 0; /* 0:auto */ -#endif char *toshiba_name = ""; #ifdef CONFIG_PCI -extern struct pci_controller tx4927_controller; - -static struct pci_dev *fake_pci_dev(struct pci_controller *hose, - int top_bus, int busnr, int devfn) +static void __init tx4927_pci_setup(void) { - static struct pci_dev dev; - static struct pci_bus bus; - - dev.sysdata = (void *)hose; - dev.devfn = devfn; - bus.number = busnr; - bus.ops = hose->pci_ops; - bus.parent = NULL; - dev.bus = &bus; - - return &dev; -} - -#define EARLY_PCI_OP(rw, size, type) \ -static int early_##rw##_config_##size(struct pci_controller *hose, \ - int top_bus, int bus, int devfn, int offset, type value) \ -{ \ - return pci_##rw##_config_##size( \ - fake_pci_dev(hose, top_bus, bus, devfn), \ - offset, value); \ + int extarb = !(__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB); + struct pci_controller *c = &txx9_primary_pcic; + + register_pci_controller(c); + + if (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66) + txx9_pci_option = + (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | + TXX9_PCI_OPT_CLK_66; /* already configured */ + + /* Reset PCI Bus */ + writeb(1, rbtx4927_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_66) + tx4927_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); + writeb(0, rbtx4927_pcireset_addr); + iob(); + + tx4927_report_pciclk(); + tx4927_pcic_setup(tx4927_pcicptr, c, extarb); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_AUTO && + txx9_pci66_check(c, 0, 0)) { + /* Reset PCI Bus */ + writeb(1, rbtx4927_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); + tx4927_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); + writeb(0, rbtx4927_pcireset_addr); + iob(); + /* Reinitialize PCIC */ + tx4927_report_pciclk(); + tx4927_pcic_setup(tx4927_pcicptr, c, extarb); + } } -EARLY_PCI_OP(read, byte, u8 *) -EARLY_PCI_OP(read, dword, u32 *) -EARLY_PCI_OP(write, byte, u8) -EARLY_PCI_OP(write, dword, u32) - -static int __init tx4927_pcibios_init(void) +static void __init tx4937_pci_setup(void) { - unsigned int id; - u32 pci_devfn; - int devfn_start = 0; - int devfn_stop = 0xff; - int busno = 0; /* One bus on the Toshiba */ - struct pci_controller *hose = &tx4927_controller; - - for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) { - early_read_config_dword(hose, busno, busno, pci_devfn, - PCI_VENDOR_ID, &id); - - if (id == 0xffffffff) { - continue; - } - - if (id == 0x94601055) { - u8 v08_64; - u32 v32_b0; - u8 v08_e1; - - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x64, &v08_64); - early_read_config_dword(hose, busno, busno, - pci_devfn, 0xb0, &v32_b0); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0xe1, &v08_e1); - - /* serial irq control */ - v08_64 = 0xd0; - - /* serial irq pin */ - v32_b0 |= 0x00010000; - - /* ide irq on isa14 */ - v08_e1 &= 0xf0; - v08_e1 |= 0x0d; - - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x64, v08_64); - early_write_config_dword(hose, busno, busno, - pci_devfn, 0xb0, v32_b0); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0xe1, v08_e1); - } - - if (id == 0x91301055) { - u8 v08_04; - u8 v08_09; - u8 v08_41; - u8 v08_43; - u8 v08_5c; - - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x04, &v08_04); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x09, &v08_09); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x41, &v08_41); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x43, &v08_43); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x5c, &v08_5c); - - /* enable ide master/io */ - v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO); - - /* enable ide native mode */ - v08_09 |= 0x05; - - /* enable primary ide */ - v08_41 |= 0x80; - - /* enable secondary ide */ - v08_43 |= 0x80; - - /* - * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! - * - * This line of code is intended to provide the user with a work - * around solution to the anomalies cited in SMSC's anomaly sheet - * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"". - * - * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! - */ - v08_5c |= 0x01; - - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x5c, v08_5c); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x04, v08_04); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x09, v08_09); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x41, v08_41); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x43, v08_43); - } - + int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB); + struct pci_controller *c = &txx9_primary_pcic; + + register_pci_controller(c); + + if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) + txx9_pci_option = + (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | + TXX9_PCI_OPT_CLK_66; /* already configured */ + + /* Reset PCI Bus */ + writeb(1, rbtx4927_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_66) + tx4938_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + writeb(0, rbtx4927_pcireset_addr); + iob(); + + tx4938_report_pciclk(); + tx4927_pcic_setup(tx4938_pcicptr, c, extarb); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_AUTO && + txx9_pci66_check(c, 0, 0)) { + /* Reset PCI Bus */ + writeb(1, rbtx4927_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + tx4938_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + writeb(0, rbtx4927_pcireset_addr); + iob(); + /* Reinitialize PCIC */ + tx4938_report_pciclk(); + tx4927_pcic_setup(tx4938_pcicptr, c, extarb); } - - register_pci_controller(&tx4927_controller); - return 0; } -arch_initcall(tx4927_pcibios_init); - -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; - -void __init tx4927_pci_setup(void) +static int __init rbtx4927_arch_init(void) { - static int called = 0; - extern unsigned int tx4927_get_mem_size(void); - - mips_memory_upper = tx4927_get_mem_size() << 20; - mips_memory_upper += KSEG0; - mips_pci_io_base = TX4927_PCIIO; - mips_pci_io_size = TX4927_PCIIO_SIZE; - mips_pci_mem_base = TX4927_PCIMEM; - mips_pci_mem_size = TX4927_PCIMEM_SIZE; - - if (!called) { - printk - ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", - toshiba_name, - (unsigned short) (tx4927_pcicptr->pciid >> 16), - (unsigned short) (tx4927_pcicptr->pciid & 0xffff), - (unsigned short) (tx4927_pcicptr->pciccrev & 0xff), - (!(tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIXARB)) ? "External" : - "Internal"); - called = 1; - } - printk("%s PCIC --%s PCICLK:", toshiba_name, - (tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : ""); - if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) { - int pciclk = 0; - if (mips_machtype == MACH_TOSHIBA_RBTX4937) - switch ((unsigned long) tx4927_ccfgptr-> - ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { - case TX4937_CCFG_PCIDIVMODE_4: - pciclk = tx4927_cpu_clock / 4; - break; - case TX4937_CCFG_PCIDIVMODE_4_5: - pciclk = tx4927_cpu_clock * 2 / 9; - break; - case TX4937_CCFG_PCIDIVMODE_5: - pciclk = tx4927_cpu_clock / 5; - break; - case TX4937_CCFG_PCIDIVMODE_5_5: - pciclk = tx4927_cpu_clock * 2 / 11; - break; - case TX4937_CCFG_PCIDIVMODE_8: - pciclk = tx4927_cpu_clock / 8; - break; - case TX4937_CCFG_PCIDIVMODE_9: - pciclk = tx4927_cpu_clock / 9; - break; - case TX4937_CCFG_PCIDIVMODE_10: - pciclk = tx4927_cpu_clock / 10; - break; - case TX4937_CCFG_PCIDIVMODE_11: - pciclk = tx4927_cpu_clock / 11; - break; - } - - else - switch ((unsigned long) tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { - case TX4927_CCFG_PCIDIVMODE_2_5: - pciclk = tx4927_cpu_clock * 2 / 5; - break; - case TX4927_CCFG_PCIDIVMODE_3: - pciclk = tx4927_cpu_clock / 3; - break; - case TX4927_CCFG_PCIDIVMODE_5: - pciclk = tx4927_cpu_clock / 5; - break; - case TX4927_CCFG_PCIDIVMODE_6: - pciclk = tx4927_cpu_clock / 6; - break; - } - - printk("Internal(%dMHz)", pciclk / 1000000); - } else - printk("External"); - printk("\n"); - - /* GB->PCI mappings */ - tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4; - tx4927_pcicptr->g2piogbase = mips_pci_io_base | -#ifdef __BIG_ENDIAN - TX4927_PCIC_G2PIOGBASE_ECHG -#else - TX4927_PCIC_G2PIOGBASE_BSDIS -#endif - ; - - tx4927_pcicptr->g2piopbase = 0; - - tx4927_pcicptr->g2pmmask[0] = (mips_pci_mem_size - 1) >> 4; - tx4927_pcicptr->g2pmgbase[0] = mips_pci_mem_base | -#ifdef __BIG_ENDIAN - TX4927_PCIC_G2PMnGBASE_ECHG -#else - TX4927_PCIC_G2PMnGBASE_BSDIS -#endif - ; - tx4927_pcicptr->g2pmpbase[0] = mips_pci_mem_base; - - tx4927_pcicptr->g2pmmask[1] = 0; - tx4927_pcicptr->g2pmgbase[1] = 0; - tx4927_pcicptr->g2pmpbase[1] = 0; - tx4927_pcicptr->g2pmmask[2] = 0; - tx4927_pcicptr->g2pmgbase[2] = 0; - tx4927_pcicptr->g2pmpbase[2] = 0; - - - /* PCI->GB mappings (I/O 256B) */ - tx4927_pcicptr->p2giopbase = 0; /* 256B */ - - /* PCI->GB mappings (MEM 512MB) M0 gets all of memory */ - tx4927_pcicptr->p2gm0plbase = 0; - tx4927_pcicptr->p2gm0pubase = 0; - tx4927_pcicptr->p2gmgbase[0] = 0 | TX4927_PCIC_P2GMnGBASE_TMEMEN | -#ifdef __BIG_ENDIAN - TX4927_PCIC_P2GMnGBASE_TECHG -#else - TX4927_PCIC_P2GMnGBASE_TBSDIS -#endif - ; - - /* PCI->GB mappings (MEM 16MB) -not used */ - tx4927_pcicptr->p2gm1plbase = 0xffffffff; - tx4927_pcicptr->p2gm1pubase = 0xffffffff; - tx4927_pcicptr->p2gmgbase[1] = 0; - - /* PCI->GB mappings (MEM 1MB) -not used */ - tx4927_pcicptr->p2gm2pbase = 0xffffffff; - tx4927_pcicptr->p2gmgbase[2] = 0; - - - /* Enable Initiator Memory 0 Space, I/O Space, Config */ - tx4927_pcicptr->pciccfg &= TX4927_PCIC_PCICCFG_LBWC_MASK; - tx4927_pcicptr->pciccfg |= - TX4927_PCIC_PCICCFG_IMSE0 | TX4927_PCIC_PCICCFG_IISE | - TX4927_PCIC_PCICCFG_ICAE | TX4927_PCIC_PCICCFG_ATR; - - - /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ - tx4927_pcicptr->pcicfg1 = 0; - - if (tx4927_pcic_trdyto >= 0) { - tx4927_pcicptr->g2ptocnt &= ~0xff; - tx4927_pcicptr->g2ptocnt |= (tx4927_pcic_trdyto & 0xff); - } - - /* Clear All Local Bus Status */ - tx4927_pcicptr->pcicstatus = TX4927_PCIC_PCICSTATUS_ALL; - /* Enable All Local Bus Interrupts */ - tx4927_pcicptr->pcicmask = TX4927_PCIC_PCICSTATUS_ALL; - /* Clear All Initiator Status */ - tx4927_pcicptr->g2pstatus = TX4927_PCIC_G2PSTATUS_ALL; - /* Enable All Initiator Interrupts */ - tx4927_pcicptr->g2pmask = TX4927_PCIC_G2PSTATUS_ALL; - /* Clear All PCI Status Error */ - tx4927_pcicptr->pcistatus = - (tx4927_pcicptr->pcistatus & 0x0000ffff) | - (TX4927_PCIC_PCISTATUS_ALL << 16); - /* Enable All PCI Status Error Interrupts */ - tx4927_pcicptr->pcimask = TX4927_PCIC_PCISTATUS_ALL; - - /* PCIC Int => IRC IRQ16 */ - tx4927_pcicptr->pcicfg2 = - (tx4927_pcicptr->pcicfg2 & 0xffffff00) | TX4927_IR_PCIC; - - if (!(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCIXARB)) { - /* XXX */ - } else { - /* Reset Bus Arbiter */ - tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_RPBA; - /* Enable Bus Arbiter */ - tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_PBAEN; - } - - tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; + if (mips_machtype == MACH_TOSHIBA_RBTX4937) + tx4937_pci_setup(); + else + tx4927_pci_setup(); + return 0; } +arch_initcall(rbtx4927_arch_init); #endif /* CONFIG_PCI */ static void __noreturn wait_forever(void) @@ -479,8 +239,6 @@ void __init plat_mem_setup(void) cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); write_c0_config(cp0_config); - set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET); - ioport_resource.end = 0xffffffff; iomem_resource.end = 0xffffffff; @@ -492,8 +250,13 @@ void __init plat_mem_setup(void) txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL); #ifdef CONFIG_PCI + txx9_alloc_pci_controller(&txx9_primary_pcic, + RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE, + RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE); +#else + set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET); +#endif - /* PCIC */ /* * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. * @@ -517,58 +280,38 @@ void __init plat_mem_setup(void) * */ if (mips_machtype == MACH_TOSHIBA_RBTX4937) - switch ((unsigned long)tx4927_ccfgptr-> - ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { - case TX4937_CCFG_PCIDIVMODE_8: - case TX4937_CCFG_PCIDIVMODE_4: - tx4927_cpu_clock = 266666666; /* 266MHz */ + switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) & + TX4938_CCFG_PCIDIVMODE_MASK) { + case TX4938_CCFG_PCIDIVMODE_8: + case TX4938_CCFG_PCIDIVMODE_4: + txx9_cpu_clock = 266666666; /* 266MHz */ break; - case TX4937_CCFG_PCIDIVMODE_9: - case TX4937_CCFG_PCIDIVMODE_4_5: - tx4927_cpu_clock = 300000000; /* 300MHz */ + case TX4938_CCFG_PCIDIVMODE_9: + case TX4938_CCFG_PCIDIVMODE_4_5: + txx9_cpu_clock = 300000000; /* 300MHz */ break; default: - tx4927_cpu_clock = 333333333; /* 333MHz */ + txx9_cpu_clock = 333333333; /* 333MHz */ } else - switch ((unsigned long)tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { + switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) & + TX4927_CCFG_PCIDIVMODE_MASK) { case TX4927_CCFG_PCIDIVMODE_2_5: case TX4927_CCFG_PCIDIVMODE_5: - tx4927_cpu_clock = 166666666; /* 166MHz */ + txx9_cpu_clock = 166666666; /* 166MHz */ break; default: - tx4927_cpu_clock = 200000000; /* 200MHz */ + txx9_cpu_clock = 200000000; /* 200MHz */ } + /* change default value to udelay/mdelay take reasonable time */ + loops_per_jiffy = txx9_cpu_clock / HZ / 2; /* CCFG */ /* do reset on watchdog */ - tx4927_ccfgptr->ccfg |= TX4927_CCFG_WR; + tx4927_ccfg_set(TX4927_CCFG_WR); /* enable Timeout BusError */ if (tx4927_ccfg_toeon) - tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE; - - tx4927_pci_setup(); - if (tx4927_using_backplane == 1) - printk("backplane board IS installed\n"); - else - printk("No Backplane \n"); - - /* this is on ISA bus behind PCI bus, so need PCI up first */ -#ifdef CONFIG_TOSHIBA_FPCIB0 - if (tx4927_using_backplane) { - smsc_fdc37m81x_init(0x3f0); - smsc_fdc37m81x_config_beg(); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, - SMSC_FDC37M81X_KBD); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, - 1); - smsc_fdc37m81x_config_end(); - } -#endif -#endif /* CONFIG_PCI */ + tx4927_ccfg_set(TX4927_CCFG_TOE); #ifdef CONFIG_SERIAL_TXX9 { @@ -611,8 +354,8 @@ void __init plat_mem_setup(void) void __init plat_time_init(void) { - mips_hpt_frequency = tx4927_cpu_clock / 2; - if (tx4927_ccfgptr->ccfg & TX4927_CCFG_TINTDIS) + mips_hpt_frequency = txx9_cpu_clock / 2; + if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS) txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL, TXX9_IRQ_BASE + 17, 50000000); diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index bbd572c9675b..144d2cada820 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -26,6 +25,8 @@ #include #include #include +#include +#include #include #ifdef CONFIG_SERIAL_TXX9 #include @@ -35,37 +36,13 @@ #include extern char * __init prom_getcmdline(void); -static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr); - /* These functions are used for rebooting or halting the machine*/ extern void rbtx4938_machine_restart(char *command); extern void rbtx4938_machine_halt(void); extern void rbtx4938_machine_power_off(void); -/* clocks */ -unsigned int txx9_master_clock; -unsigned int txx9_cpu_clock; -unsigned int txx9_gbus_clock; - -unsigned long rbtx4938_ce_base[8]; -unsigned long rbtx4938_ce_size[8]; -int txboard_pci66_mode; -static int tx4938_pcic_trdyto; /* default: disabled */ -static int tx4938_pcic_retryto; /* default: disabled */ static int tx4938_ccfg_toeon = 1; -struct tx4938_pcic_reg *pcicptrs[4] = { - tx4938_pcicptr /* default setting for TX4938 */ -}; - -static struct { - unsigned long base; - unsigned long size; -} phys_regions[16] __initdata; -static int num_phys_regions __initdata; - -#define PHYS_REGION_MINSIZE 0x10000 - void rbtx4938_machine_halt(void) { printk(KERN_NOTICE "System Halted\n"); @@ -95,473 +72,72 @@ void rbtx4938_machine_restart(char *command) ; } -void __init -txboard_add_phys_region(unsigned long base, unsigned long size) -{ - if (num_phys_regions >= ARRAY_SIZE(phys_regions)) { - printk("phys_region overflow\n"); - return; - } - phys_regions[num_phys_regions].base = base; - phys_regions[num_phys_regions].size = size; - num_phys_regions++; -} -unsigned long __init -txboard_find_free_phys_region(unsigned long begin, unsigned long end, - unsigned long size) -{ - unsigned long base; - int i; - - for (base = begin / size * size; base < end; base += size) { - for (i = 0; i < num_phys_regions; i++) { - if (phys_regions[i].size && - base <= phys_regions[i].base + (phys_regions[i].size - 1) && - base + (size - 1) >= phys_regions[i].base) - break; - } - if (i == num_phys_regions) - return base; - } - return 0; -} -unsigned long __init -txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end, - unsigned long *size) -{ - unsigned long sz, base; - for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) { - base = txboard_find_free_phys_region(begin, end, sz); - if (base) { - *size = sz; - return base; - } - } - return 0; -} -unsigned long __init -txboard_request_phys_region_range(unsigned long begin, unsigned long end, - unsigned long size) -{ - unsigned long base; - base = txboard_find_free_phys_region(begin, end, size); - if (base) - txboard_add_phys_region(base, size); - return base; -} -unsigned long __init -txboard_request_phys_region(unsigned long size) +static void __init rbtx4938_pci_setup(void) { - unsigned long base; - unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ - base = txboard_find_free_phys_region(begin, end, size); - if (base) - txboard_add_phys_region(base, size); - return base; -} -unsigned long __init -txboard_request_phys_region_shrink(unsigned long *size) -{ - unsigned long base; - unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ - base = txboard_find_free_phys_region_shrink(begin, end, size); - if (base) - txboard_add_phys_region(base, *size); - return base; -} - #ifdef CONFIG_PCI -void __init -tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr, - struct pci_controller *channel, - unsigned long pci_io_base, - int extarb) -{ - int i; + int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB); + struct pci_controller *c = &txx9_primary_pcic; - /* Disable All Initiator Space */ - pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)| - TX4938_PCIC_PCICCFG_G2PMEN(1)| - TX4938_PCIC_PCICCFG_G2PMEN(2)| - TX4938_PCIC_PCICCFG_G2PIOEN); - - /* GB->PCI mappings */ - pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4; - pcicptr->g2piogbase = pci_io_base | -#ifdef __BIG_ENDIAN - TX4938_PCIC_G2PIOGBASE_ECHG -#else - TX4938_PCIC_G2PIOGBASE_BSDIS -#endif - ; - pcicptr->g2piopbase = 0; - for (i = 0; i < 3; i++) { - pcicptr->g2pmmask[i] = 0; - pcicptr->g2pmgbase[i] = 0; - pcicptr->g2pmpbase[i] = 0; - } - if (channel->mem_resource->end) { - pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4; - pcicptr->g2pmgbase[0] = channel->mem_resource->start | -#ifdef __BIG_ENDIAN - TX4938_PCIC_G2PMnGBASE_ECHG -#else - TX4938_PCIC_G2PMnGBASE_BSDIS -#endif - ; - pcicptr->g2pmpbase[0] = channel->mem_resource->start; - } - /* PCI->GB mappings (I/O 256B) */ - pcicptr->p2giopbase = 0; /* 256B */ - pcicptr->p2giogbase = 0; - /* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */ - pcicptr->p2gm0plbase = 0; - pcicptr->p2gm0pubase = 0; - pcicptr->p2gmgbase[0] = 0 | - TX4938_PCIC_P2GMnGBASE_TMEMEN | -#ifdef __BIG_ENDIAN - TX4938_PCIC_P2GMnGBASE_TECHG -#else - TX4938_PCIC_P2GMnGBASE_TBSDIS -#endif - ; - /* PCI->GB mappings (MEM 16MB) */ - pcicptr->p2gm1plbase = 0xffffffff; - pcicptr->p2gm1pubase = 0xffffffff; - pcicptr->p2gmgbase[1] = 0; - /* PCI->GB mappings (MEM 1MB) */ - pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */ - pcicptr->p2gmgbase[2] = 0; - - pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK; - /* Enable Initiator Memory Space */ - if (channel->mem_resource->end) - pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0); - /* Enable Initiator I/O Space */ - if (channel->io_resource->end) - pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN; - /* Enable Initiator Config */ - pcicptr->pciccfg |= - TX4938_PCIC_PCICCFG_ICAEN | - TX4938_PCIC_PCICCFG_TCAR; - - /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ - pcicptr->pcicfg1 = 0; - - pcicptr->g2ptocnt &= ~0xffff; - - if (tx4938_pcic_trdyto >= 0) { - pcicptr->g2ptocnt &= ~0xff; - pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff); - } - - if (tx4938_pcic_retryto >= 0) { - pcicptr->g2ptocnt &= ~0xff00; - pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00); - } - - /* Clear All Local Bus Status */ - pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL; - /* Enable All Local Bus Interrupts */ - pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL; - /* Clear All Initiator Status */ - pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL; - /* Enable All Initiator Interrupts */ - pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL; - /* Clear All PCI Status Error */ - pcicptr->pcistatus = - (pcicptr->pcistatus & 0x0000ffff) | - (TX4938_PCIC_PCISTATUS_ALL << 16); - /* Enable All PCI Status Error Interrupts */ - pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL; - - if (!extarb) { - /* Reset Bus Arbiter */ - pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA; - pcicptr->pbabm = 0; - /* Enable Bus Arbiter */ - pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN; - } - - /* PCIC Int => IRC IRQ16 */ - pcicptr->pcicfg2 = - (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC; - - pcicptr->pcistatus = PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; -} - -int __init -tx4938_report_pciclk(void) -{ - unsigned long pcode = TX4938_REV_PCODE(); - int pciclk = 0; - printk("TX%lx PCIC --%s PCICLK:", - pcode, - (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : ""); - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { - - switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) { - case TX4938_CCFG_PCIDIVMODE_4: - pciclk = txx9_cpu_clock / 4; break; - case TX4938_CCFG_PCIDIVMODE_4_5: - pciclk = txx9_cpu_clock * 2 / 9; break; - case TX4938_CCFG_PCIDIVMODE_5: - pciclk = txx9_cpu_clock / 5; break; - case TX4938_CCFG_PCIDIVMODE_5_5: - pciclk = txx9_cpu_clock * 2 / 11; break; - case TX4938_CCFG_PCIDIVMODE_8: - pciclk = txx9_cpu_clock / 8; break; - case TX4938_CCFG_PCIDIVMODE_9: - pciclk = txx9_cpu_clock / 9; break; - case TX4938_CCFG_PCIDIVMODE_10: - pciclk = txx9_cpu_clock / 10; break; - case TX4938_CCFG_PCIDIVMODE_11: - pciclk = txx9_cpu_clock / 11; break; - } - printk("Internal(%dMHz)", pciclk / 1000000); - } else { - printk("External"); - pciclk = -1; - } - printk("\n"); - return pciclk; -} - -void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr) -{ - pcicptrs[ch] = pcicptr; -} - -struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch) -{ - return pcicptrs[ch]; -} - -static struct pci_dev *fake_pci_dev(struct pci_controller *hose, - int top_bus, int busnr, int devfn) -{ - static struct pci_dev dev; - static struct pci_bus bus; + register_pci_controller(c); - dev.sysdata = bus.sysdata = hose; - dev.devfn = devfn; - bus.number = busnr; - bus.ops = hose->pci_ops; - bus.parent = NULL; - dev.bus = &bus; - - return &dev; -} - -#define EARLY_PCI_OP(rw, size, type) \ -static int early_##rw##_config_##size(struct pci_controller *hose, \ - int top_bus, int bus, int devfn, int offset, type value) \ -{ \ - return pci_##rw##_config_##size( \ - fake_pci_dev(hose, top_bus, bus, devfn), \ - offset, value); \ -} - -EARLY_PCI_OP(read, word, u16 *) - -int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus) -{ - u32 pci_devfn; - unsigned short vid; - int devfn_start = 0; - int devfn_stop = 0xff; - int cap66 = -1; - u16 stat; - - printk("PCI: Checking 66MHz capabilities...\n"); - - for (pci_devfn=devfn_start; pci_devfn 0; -} - -int __init -tx4938_pciclk66_setup(void) -{ - int pciclk; - - /* Assert M66EN */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66; - /* Double PCICLK (if possible) */ - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { - unsigned int pcidivmode = - tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK; - switch (pcidivmode) { - case TX4938_CCFG_PCIDIVMODE_8: - case TX4938_CCFG_PCIDIVMODE_4: - pcidivmode = TX4938_CCFG_PCIDIVMODE_4; - pciclk = txx9_cpu_clock / 4; - break; - case TX4938_CCFG_PCIDIVMODE_9: - case TX4938_CCFG_PCIDIVMODE_4_5: - pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5; - pciclk = txx9_cpu_clock * 2 / 9; - break; - case TX4938_CCFG_PCIDIVMODE_10: - case TX4938_CCFG_PCIDIVMODE_5: - pcidivmode = TX4938_CCFG_PCIDIVMODE_5; - pciclk = txx9_cpu_clock / 5; - break; - case TX4938_CCFG_PCIDIVMODE_11: - case TX4938_CCFG_PCIDIVMODE_5_5: - default: - pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5; - pciclk = txx9_cpu_clock * 2 / 11; - break; - } - tx4938_ccfgptr->ccfg = - (tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK) - | pcidivmode; - printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n", - (unsigned long)tx4938_ccfgptr->ccfg); - } else { - pciclk = -1; - } - return pciclk; -} - -extern struct pci_controller tx4938_pci_controller[]; -static int __init tx4938_pcibios_init(void) -{ - unsigned long mem_base[2]; - unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0, TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */ - unsigned long io_base[2]; - unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0, TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */ - /* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */ - int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB); - - PCIBIOS_MIN_IO = 0x00001000UL; - - mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]); - io_base[0] = txboard_request_phys_region_shrink(&io_size[0]); - - printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", - (unsigned short)(tx4938_pcicptr->pciid >> 16), - (unsigned short)(tx4938_pcicptr->pciid & 0xffff), - (unsigned short)(tx4938_pcicptr->pciccrev & 0xff), - extarb ? "External" : "Internal"); - - /* setup PCI area */ - tx4938_pci_controller[0].io_resource->start = io_base[0]; - tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1; - tx4938_pci_controller[0].mem_resource->start = mem_base[0]; - tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1; - - set_tx4938_pcicptr(0, tx4938_pcicptr); - - register_pci_controller(&tx4938_pci_controller[0]); - - if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) { - printk("TX4938_CCFG_PCI66 already configured\n"); - txboard_pci66_mode = -1; /* already configured */ - } + if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) + txx9_pci_option = + (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | + TXX9_PCI_OPT_CLK_66; /* already configured */ /* Reset PCI Bus */ writeb(0, rbtx4938_pcireset_addr); /* Reset PCIC */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; - if (txboard_pci66_mode > 0) + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_66) tx4938_pciclk66_setup(); mdelay(10); /* clear PCIC reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); writeb(1, rbtx4938_pcireset_addr); - mmiowb(); - tx4938_report_pcic_status1(tx4938_pcicptr); + iob(); tx4938_report_pciclk(); - tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); - if (txboard_pci66_mode == 0 && - txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) { + tx4927_pcic_setup(tx4938_pcicptr, c, extarb); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_AUTO && + txx9_pci66_check(c, 0, 0)) { /* Reset PCI Bus */ writeb(0, rbtx4938_pcireset_addr); /* Reset PCIC */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); tx4938_pciclk66_setup(); mdelay(10); /* clear PCIC reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); writeb(1, rbtx4938_pcireset_addr); - mmiowb(); + iob(); /* Reinitialize PCIC */ tx4938_report_pciclk(); - tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); + tx4927_pcic_setup(tx4938_pcicptr, c, extarb); } - mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]); - io_base[1] = txboard_request_phys_region_shrink(&io_size[1]); - /* Reset PCIC1 */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST; - /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */ - if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD)) - tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66; - else - tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66; - mdelay(10); - /* clear PCIC1 reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; - tx4938_report_pcic_status1(tx4938_pcic1ptr); - - printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x", - (unsigned short)(tx4938_pcic1ptr->pciid >> 16), - (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff), - (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff)); - printk("%s PCICLK:%dMHz\n", - (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "", - txx9_gbus_clock / - ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) / - 1000000); - - /* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */ - tx4938_pci_controller[1].io_resource->start = - io_base[1] - io_base[0]; - tx4938_pci_controller[1].io_resource->end = - io_base[1] - io_base[0] + io_size[1] - 1; - tx4938_pci_controller[1].mem_resource->start = mem_base[1]; - tx4938_pci_controller[1].mem_resource->end = - mem_base[1] + mem_size[1] - 1; - set_tx4938_pcicptr(1, tx4938_pcic1ptr); - - register_pci_controller(&tx4938_pci_controller[1]); - - tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb); - - /* map ioport 0 to PCI I/O space address 0 */ - set_io_port_base(KSEG1 + io_base[0]); - - return 0; -} - -arch_initcall(tx4938_pcibios_init); - + if (__raw_readq(&tx4938_ccfgptr->pcfg) & + (TX4938_PCFG_ETH0_SEL|TX4938_PCFG_ETH1_SEL)) { + /* Reset PCIC1 */ + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST); + /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */ + if (!(__raw_readq(&tx4938_ccfgptr->ccfg) + & TX4938_CCFG_PCI1DMD)) + tx4938_ccfg_set(TX4938_CCFG_PCI1_66); + mdelay(10); + /* clear PCIC1 reset */ + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST); + tx4938_report_pci1clk(); + + /* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */ + c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000); + register_pci_controller(c); + tx4927_pcic_setup(tx4938_pcic1ptr, c, 0); + } #endif /* CONFIG_PCI */ +} /* SPI support */ @@ -594,7 +170,7 @@ static int __init rbtx4938_ethaddr_init(void) unsigned int id = TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0); struct platform_device *pdev; - if (!(tx4938_ccfgptr->pcfg & + if (!(__raw_readq(&tx4938_ccfgptr->pcfg) & (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL))) continue; pdev = platform_device_alloc("tc35815-mac", id); @@ -611,18 +187,12 @@ device_initcall(rbtx4938_ethaddr_init); static void __init rbtx4938_spi_setup(void) { /* set SPI_SEL */ - tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL; + txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_SPI_SEL); } static struct resource rbtx4938_fpga_resource; - -static char pcode_str[8]; -static struct resource tx4938_reg_resource = { - .start = TX4938_REG_BASE, - .end = TX4938_REG_BASE + TX4938_REG_SIZE, - .name = pcode_str, - .flags = IORESOURCE_MEM -}; +static struct resource tx4938_sdram_resource[4]; +static struct resource tx4938_sram_resource; void __init tx4938_board_setup(void) { @@ -631,24 +201,28 @@ void __init tx4938_board_setup(void) int cpuclk = 0; unsigned long pcode = TX4938_REV_PCODE(); - ioport_resource.start = 0x1000; + ioport_resource.start = 0; ioport_resource.end = 0xffffffff; - iomem_resource.start = 0x1000; + iomem_resource.start = 0; iomem_resource.end = 0xffffffff; /* expand to 4GB */ - sprintf(pcode_str, "TX%lx", pcode); + txx9_reg_res_init(pcode, TX4938_REG_BASE, + TX4938_REG_SIZE); /* SDRAMC,EBUSC are configured by PROM */ for (i = 0; i < 8; i++) { - if (!(tx4938_ebuscptr->cr[i] & 0x8)) + if (!(TX4938_EBUSC_CR(i) & 0x8)) continue; /* disabled */ - rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i); - txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i)); + txx9_ce_res[i].start = (unsigned long)TX4938_EBUSC_BA(i); + txx9_ce_res[i].end = + txx9_ce_res[i].start + TX4938_EBUSC_SIZE(i) - 1; + request_resource(&iomem_resource, &txx9_ce_res[i]); } /* clocks */ if (txx9_master_clock) { + u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg); /* calculate gbus_clock and cpu_clock_freq from master_clock */ - divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; + divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK; switch (divmode) { case TX4938_CCFG_DIVMODE_8: case TX4938_CCFG_DIVMODE_10: @@ -678,12 +252,13 @@ void __init tx4938_board_setup(void) } txx9_cpu_clock = cpuclk; } else { + u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg); if (txx9_cpu_clock == 0) { txx9_cpu_clock = 300000000; /* 300MHz */ } /* calculate gbus_clock and master_clock from cpu_clock_freq */ cpuclk = txx9_cpu_clock; - divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; + divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK; switch (divmode) { case TX4938_CCFG_DIVMODE_2: case TX4938_CCFG_DIVMODE_8: @@ -717,32 +292,32 @@ void __init tx4938_board_setup(void) /* CCFG */ /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW; + tx4938_ccfg_set(TX4938_CCFG_WDRST | TX4938_CCFG_BEOW); /* do reset on watchdog */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_WR; + tx4938_ccfg_set(TX4938_CCFG_WR); /* clear PCIC1 reset */ - if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST) - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST); /* enable Timeout BusError */ if (tx4938_ccfg_toeon) - tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE; + tx4938_ccfg_set(TX4938_CCFG_TOE); /* DMA selection */ - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL; + txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_DMASEL_ALL); /* Use external clock for external arbiter */ - if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB)) - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL; - - printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n", - pcode_str, - cpuclk / 1000000, txx9_master_clock / 1000000, - (unsigned long)tx4938_ccfgptr->crir, - tx4938_ccfgptr->ccfg, - tx4938_ccfgptr->pcfg); - - printk("%s SDRAMC --", pcode_str); + if (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB)) + txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_PCICLKEN_ALL); + + printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n", + txx9_pcode_str, + (cpuclk + 500000) / 1000000, + (txx9_master_clock + 500000) / 1000000, + (__u32)____raw_readq(&tx4938_ccfgptr->crir), + (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg), + (unsigned long long)____raw_readq(&tx4938_ccfgptr->pcfg)); + + printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str); for (i = 0; i < 4; i++) { unsigned long long cr = tx4938_sdramcptr->cr[i]; unsigned long ram_base, ram_size; @@ -753,16 +328,24 @@ void __init tx4938_board_setup(void) if (ram_base >= 0x20000000) continue; /* high memory (ignore) */ printk(" CR%d:%016Lx", i, cr); - txboard_add_phys_region(ram_base, ram_size); + tx4938_sdram_resource[i].name = "SDRAM"; + tx4938_sdram_resource[i].start = ram_base; + tx4938_sdram_resource[i].end = ram_base + ram_size - 1; + tx4938_sdram_resource[i].flags = IORESOURCE_MEM; + request_resource(&iomem_resource, &tx4938_sdram_resource[i]); } printk(" TR:%09Lx\n", tx4938_sdramcptr->tr); /* SRAM */ - if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) { + if (tx4938_sramcptr->cr & 1) { unsigned int size = 0x800; unsigned long base = (tx4938_sramcptr->cr >> (39-11)) & ~(size - 1); - txboard_add_phys_region(base, size); + tx4938_sram_resource.name = "SRAM"; + tx4938_sram_resource.start = base; + tx4938_sram_resource.end = base + size - 1; + tx4938_sram_resource.flags = IORESOURCE_MEM; + request_resource(&iomem_resource, &tx4938_sram_resource); } /* TMR */ @@ -778,71 +361,15 @@ void __init tx4938_board_setup(void) __raw_writel(0, &tx4938_pioptr->maskcpu); __raw_writel(0, &tx4938_pioptr->maskext); - /* TX4938 internal registers */ - if (request_resource(&iomem_resource, &tx4938_reg_resource)) - printk("request resource for internal registers failed\n"); -} - #ifdef CONFIG_PCI -static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr) -{ - unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16); - unsigned long g2pstatus = pcicptr->g2pstatus; - unsigned long pcicstatus = pcicptr->pcicstatus; - static struct { - unsigned long flag; - const char *str; - } pcistat_tbl[] = { - { PCI_STATUS_DETECTED_PARITY, "DetectedParityError" }, - { PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" }, - { PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" }, - { PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" }, - { PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" }, - { PCI_STATUS_PARITY, "MasterParityError" }, - }, g2pstat_tbl[] = { - { TX4938_PCIC_G2PSTATUS_TTOE, "TIOE" }, - { TX4938_PCIC_G2PSTATUS_RTOE, "RTOE" }, - }, pcicstat_tbl[] = { - { TX4938_PCIC_PCICSTATUS_PME, "PME" }, - { TX4938_PCIC_PCICSTATUS_TLB, "TLB" }, - { TX4938_PCIC_PCICSTATUS_NIB, "NIB" }, - { TX4938_PCIC_PCICSTATUS_ZIB, "ZIB" }, - { TX4938_PCIC_PCICSTATUS_PERR, "PERR" }, - { TX4938_PCIC_PCICSTATUS_SERR, "SERR" }, - { TX4938_PCIC_PCICSTATUS_GBE, "GBE" }, - { TX4938_PCIC_PCICSTATUS_IWB, "IWB" }, - }; - int i; - - printk("pcistat:%04x(", pcistatus); - for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++) - if (pcistatus & pcistat_tbl[i].flag) - printk("%s ", pcistat_tbl[i].str); - printk("), g2pstatus:%08lx(", g2pstatus); - for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++) - if (g2pstatus & g2pstat_tbl[i].flag) - printk("%s ", g2pstat_tbl[i].str); - printk("), pcicstatus:%08lx(", pcicstatus); - for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++) - if (pcicstatus & pcicstat_tbl[i].flag) - printk("%s ", pcicstat_tbl[i].str); - printk(")\n"); -} - -void tx4938_report_pcic_status(void) -{ - int i; - struct tx4938_pcic_reg *pcicptr; - for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++) - tx4938_report_pcic_status1(pcicptr); + txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0); +#endif } -#endif /* CONFIG_PCI */ - void __init plat_time_init(void) { mips_hpt_frequency = txx9_cpu_clock / 2; - if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS) + if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS) txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL, TXX9_IRQ_BASE + TX4938_IR_TMR(0), txx9_gbus_clock / 2); @@ -890,19 +417,20 @@ void __init plat_mem_setup(void) #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 printk("PIOSEL: disabling both ata and nand selection\n"); local_irq_disable(); - tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); + txx9_clear64(&tx4938_ccfgptr->pcfg, + TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND printk("PIOSEL: enabling nand selection\n"); - tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL; - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL; + txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); + txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA printk("PIOSEL: enabling ata selection\n"); - tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL; - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL; + txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); + txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); #endif #ifdef CONFIG_IP_PNP @@ -920,7 +448,7 @@ void __init plat_mem_setup(void) #endif rbtx4938_spi_setup(); - pcfg = tx4938_ccfgptr->pcfg; /* updated */ + pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */ /* fixup piosel */ if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == TX4938_PCFG_ATA_SEL) @@ -1063,6 +591,7 @@ static int __init rbtx4938_arch_init(void) { txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16); gpiochip_add(&rbtx4938_spi_gpio_chip); + rbtx4938_pci_setup(); return rbtx4938_spi_init(); } arch_initcall(rbtx4938_arch_init); -- cgit v1.2.3 From 766891565bdaf605ea4aebe3e75de77e848254d0 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 11 Jul 2008 00:33:21 +0900 Subject: [MIPS] TXx9: Update defconfigs Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/configs/jmr3927_defconfig | 180 ++++++++++++++++++++----------- arch/mips/configs/rbhma4200_defconfig | 153 +++++++++++++++----------- arch/mips/configs/rbhma4500_defconfig | 196 ++++++++++++++++++++++------------ 3 files changed, 340 insertions(+), 189 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 92000a3a871d..ab16e67ff08b 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc1 -# Thu Aug 2 23:07:36 2007 +# Linux kernel version: 2.6.26-rc9 +# Fri Jul 11 00:25:19 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set @@ -24,6 +26,7 @@ CONFIG_MIPS=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -38,18 +41,27 @@ CONFIG_TOSHIBA_JMR3927=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set # CONFIG_WR_PPMC is not set +# CONFIG_TOSHIBA_FPCIB0 is not set +CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_TXX9=y +CONFIG_GPIO_TXX9=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y @@ -102,13 +114,20 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -142,18 +161,25 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -166,6 +192,14 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -187,19 +221,18 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y -# -# PCCARD (PCMCIA/CardBus) support -# - # # Executable file formats # @@ -210,6 +243,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -243,25 +277,21 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set +# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -269,6 +299,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -277,6 +308,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -305,6 +337,7 @@ CONFIG_BLK_DEV=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -316,10 +349,6 @@ CONFIG_BLK_DEV=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # @@ -327,7 +356,7 @@ CONFIG_BLK_DEV=y # # -# An alternative FireWire stack is available with EXPERIMENTAL=y +# A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -337,10 +366,27 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=y +# CONFIG_MII is not set # CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set @@ -349,6 +395,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -356,13 +406,13 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_TC35815=y -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -377,6 +427,7 @@ CONFIG_TC35815=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -398,7 +449,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -422,6 +472,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set @@ -429,7 +480,6 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set -# CONFIG_MOXA_SMARTIO_NEW is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set @@ -461,22 +511,30 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_HAVE_GPIO_LIB=y # -# SPI support +# GPIO Support +# + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -492,30 +550,47 @@ CONFIG_TXX9_WDT=y # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Sound @@ -524,7 +599,9 @@ CONFIG_TXX9_WDT=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -549,9 +626,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_DS1742=y +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -559,23 +637,6 @@ CONFIG_RTC_DRV_DS1742=y # # on-CPU RTC drivers # - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -588,12 +649,10 @@ CONFIG_RTC_DRV_DS1742=y # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -620,7 +679,7 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -628,17 +687,15 @@ CONFIG_RAMFS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -654,10 +711,6 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set # @@ -665,13 +718,15 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" # @@ -685,6 +740,7 @@ CONFIG_CMDLINE="" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig index f89482a2aa6b..e0af6a9f9f0c 100644 --- a/arch/mips/configs/rbhma4200_defconfig +++ b/arch/mips/configs/rbhma4200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc1 -# Thu Aug 2 22:55:57 2007 +# Linux kernel version: 2.6.26-rc9 +# Thu Jul 10 23:52:40 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set @@ -24,6 +26,7 @@ CONFIG_MIPS=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -39,17 +42,26 @@ CONFIG_TOSHIBA_RBTX4927=y # CONFIG_TOSHIBA_RBTX4938 is not set # CONFIG_WR_PPMC is not set # CONFIG_TOSHIBA_FPCIB0 is not set +CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y +CONFIG_PCI_TX4927=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_TXX9=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set @@ -107,13 +119,20 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -148,19 +167,26 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set CONFIG_ANON_INODES=y @@ -173,9 +199,18 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set @@ -197,19 +232,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set CONFIG_MMU=y -# -# PCCARD (PCMCIA/CardBus) support -# - # # Executable file formats # @@ -220,6 +254,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -254,26 +289,22 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set +# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -281,6 +312,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -289,6 +321,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -317,10 +350,11 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -332,10 +366,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # @@ -343,7 +373,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # -# An alternative FireWire stack is available with EXPERIMENTAL=y +# A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -353,6 +383,7 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -366,7 +397,12 @@ CONFIG_NET_ETHERNET=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NE2000=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set +# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -376,6 +412,7 @@ CONFIG_NE2000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -405,6 +442,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -428,22 +466,17 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -451,7 +484,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_TXX9_WDT=m +CONFIG_TXX9_WDT=y # # PCI-based Watchdog Cards @@ -459,30 +492,47 @@ CONFIG_TXX9_WDT=m # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Sound @@ -490,7 +540,9 @@ CONFIG_TXX9_WDT=m # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -515,9 +567,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_DS1742=y +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -525,23 +578,6 @@ CONFIG_RTC_DRV_DS1742=y # # on-CPU RTC drivers # - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -554,12 +590,10 @@ CONFIG_RTC_DRV_DS1742=y CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -588,7 +622,7 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -596,18 +630,16 @@ CONFIG_RAMFS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -624,10 +656,6 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set # @@ -635,13 +663,15 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" CONFIG_SYS_SUPPORTS_KGDB=y @@ -656,6 +686,7 @@ CONFIG_SYS_SUPPORTS_KGDB=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 70cf69761673..50aa1b641360 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc1 -# Thu Aug 2 22:59:53 2007 +# Linux kernel version: 2.6.26-rc9 +# Thu Jul 10 23:53:27 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set @@ -24,6 +26,7 @@ CONFIG_MIPS=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -38,6 +41,8 @@ CONFIG_MIPS=y # CONFIG_TOSHIBA_RBTX4927 is not set CONFIG_TOSHIBA_RBTX4938=y # CONFIG_WR_PPMC is not set +# CONFIG_TOSHIBA_FPCIB0 is not set +CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y # # Multiplex Pin Select @@ -45,21 +50,30 @@ CONFIG_TOSHIBA_RBTX4938=y CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set +CONFIG_PCI_TX4927=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_TXX9=y +CONFIG_CSRC_R4K=y +CONFIG_GPIO_TXX9=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y @@ -113,13 +127,20 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -154,19 +175,26 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set CONFIG_ANON_INODES=y @@ -179,9 +207,18 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set @@ -203,19 +240,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set CONFIG_MMU=y -# -# PCCARD (PCMCIA/CardBus) support -# - # # Executable file formats # @@ -226,6 +262,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -260,26 +297,22 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set +# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -287,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -295,6 +329,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -323,10 +358,11 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -338,10 +374,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # @@ -349,7 +381,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # -# An alternative FireWire stack is available with EXPERIMENTAL=y +# A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -359,10 +391,27 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=y +# CONFIG_MII is not set # CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set @@ -372,6 +421,10 @@ CONFIG_MII=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NE2000=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -379,13 +432,13 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_TC35815=y -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -400,6 +453,7 @@ CONFIG_TC35815=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -424,6 +478,7 @@ CONFIG_TC35815=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -447,17 +502,11 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -471,9 +520,25 @@ CONFIG_SPI_TXX9=y # CONFIG_SPI_AT25=y # CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -489,30 +554,47 @@ CONFIG_TXX9_WDT=m # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Sound @@ -520,7 +602,9 @@ CONFIG_TXX9_WDT=m # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -540,16 +624,18 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y # # SPI RTC drivers # -CONFIG_RTC_DRV_RS5C348=y # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +CONFIG_RTC_DRV_RS5C348=y # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -557,23 +643,6 @@ CONFIG_RTC_DRV_RS5C348=y # # on-CPU RTC drivers # - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -586,12 +655,10 @@ CONFIG_RTC_DRV_RS5C348=y CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -620,7 +687,7 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -628,18 +695,16 @@ CONFIG_RAMFS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -656,10 +721,6 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set # @@ -667,13 +728,15 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" CONFIG_SYS_SUPPORTS_KGDB=y @@ -688,6 +751,7 @@ CONFIG_SYS_SUPPORTS_KGDB=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set -- cgit v1.2.3 From edcaf1a6a77315562e9781245cc8e028c9a921dc Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 11 Jul 2008 23:27:54 +0900 Subject: [MIPS] TXx9: Make single kernel can support multiple boards Make single kernel can be used on RBTX4927/37/38. Also make some SoC-specific code independent from board-specific code. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 67 +------------- arch/mips/Makefile | 21 ++--- arch/mips/pci/Makefile | 9 +- arch/mips/pci/fixup-jmr3927.c | 8 +- arch/mips/pci/fixup-rbtx4927.c | 8 +- arch/mips/pci/fixup-rbtx4938.c | 11 +-- arch/mips/txx9/Kconfig | 82 ++++++++++++++++- arch/mips/txx9/generic/Makefile | 4 +- arch/mips/txx9/generic/irq_tx4927.c | 33 +------ arch/mips/txx9/generic/irq_tx4938.c | 31 +------ arch/mips/txx9/generic/pci.c | 11 +++ arch/mips/txx9/generic/setup.c | 169 ++++++++++++++++++++++++++++++++++++ arch/mips/txx9/jmr3927/Makefile | 2 +- arch/mips/txx9/jmr3927/init.c | 57 ------------ arch/mips/txx9/jmr3927/irq.c | 45 +++++----- arch/mips/txx9/jmr3927/prom.c | 46 +++------- arch/mips/txx9/jmr3927/setup.c | 54 +++++------- arch/mips/txx9/rbtx4927/irq.c | 57 ++++++------ arch/mips/txx9/rbtx4927/prom.c | 52 +---------- arch/mips/txx9/rbtx4927/setup.c | 78 ++++++++--------- arch/mips/txx9/rbtx4938/irq.c | 48 ++++++---- arch/mips/txx9/rbtx4938/prom.c | 49 +---------- arch/mips/txx9/rbtx4938/setup.c | 64 +++++--------- 23 files changed, 470 insertions(+), 536 deletions(-) delete mode 100644 arch/mips/txx9/jmr3927/init.c (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 2ea6fff88811..72baa1a70fcb 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -550,66 +550,11 @@ config SNI_RM Technology and now in turn merged with Fujitsu. Say Y here to support this machine type. -config TOSHIBA_JMR3927 - bool "Toshiba JMR-TX3927 board" - select CEVT_TXX9 - select DMA_NONCOHERENT - select HW_HAS_PCI - select MIPS_TX3927 - select IRQ_TXX9 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX39XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ - select GPIO_TXX9 +config MACH_TX39XX + bool "Toshiba TX39 series based machines" -config TOSHIBA_RBTX4927 - bool "Toshiba RBTX49[23]7 board" - select CEVT_R4K - select CSRC_R4K - select CEVT_TXX9 - select DMA_NONCOHERENT - select HAS_TXX9_SERIAL - select HW_HAS_PCI - select IRQ_CPU - select IRQ_TXX9 - select PCI_TX4927 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ - help - This Toshiba board is based on the TX4927 processor. Say Y here to - support this machine type - -config TOSHIBA_RBTX4938 - bool "Toshiba RBTX4938 board" - select CEVT_R4K - select CSRC_R4K - select CEVT_TXX9 - select DMA_NONCOHERENT - select HAS_TXX9_SERIAL - select HW_HAS_PCI - select IRQ_CPU - select IRQ_TXX9 - select PCI_TX4927 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ - select GPIO_TXX9 - help - This Toshiba board is based on the TX4938 processor. Say Y here to - support this machine type +config MACH_TX49XX + bool "Toshiba TX49 series based machines" config WR_PPMC bool "Wind River PPMC board" @@ -887,10 +832,6 @@ config PCI_GT64XXX_PCI0 config NO_EXCEPT_FILL bool -config MIPS_TX3927 - bool - select HAS_TXX9_SERIAL - config MIPS_RM9122 bool select SERIAL_RM9000 diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 8e1e49c5186b..d319cd624135 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -550,30 +550,31 @@ load-$(CONFIG_SNI_RM) += 0xffffffff80030000 endif all-$(CONFIG_SNI_RM) := vmlinux.ecoff +# +# Common TXx9 +# +core-$(CONFIG_MACH_TX39XX) += arch/mips/txx9/generic/ +cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-jmr3927 +load-$(CONFIG_MACH_TX39XX) += 0xffffffff80050000 +core-$(CONFIG_MACH_TX49XX) += arch/mips/txx9/generic/ +cflags-$(CONFIG_MACH_TX49XX) += -Iinclude/asm-mips/mach-tx49xx +load-$(CONFIG_MACH_TX49XX) += 0xffffffff80100000 + # # Toshiba JMR-TX3927 board # -core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/txx9/jmr3927/ \ - arch/mips/txx9/generic/ -cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927 -load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000 +core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/txx9/jmr3927/ # # Toshiba RBTX4927 board or # Toshiba RBTX4937 board # core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/rbtx4927/ -core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/generic/ -cflags-$(CONFIG_TOSHIBA_RBTX4927) += -Iinclude/asm-mips/mach-tx49xx -load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000 # # Toshiba RBTX4938 board # core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/ -core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/generic/ -cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx -load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000 cflags-y += -Iinclude/asm-mips/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 908764878ac8..875b643438c0 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -11,11 +11,10 @@ obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o obj-$(CONFIG_PCI_GT64XXX_PCI0) += ops-gt64xxx_pci0.o obj-$(CONFIG_MIPS_MSC) += ops-msc.o obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o -obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o +obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o -obj-$(CONFIG_PCI_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o # @@ -44,8 +43,10 @@ obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o -obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o pci-tx4927.o pci-tx4938.o -obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o pci-tx4938.o +obj-$(CONFIG_SOC_TX4927) += pci-tx4927.o +obj-$(CONFIG_SOC_TX4938) += pci-tx4938.o +obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o +obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c index d5edaf21e088..0f1069527cba 100644 --- a/arch/mips/pci/fixup-jmr3927.c +++ b/arch/mips/pci/fixup-jmr3927.c @@ -31,7 +31,7 @@ #include #include -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +int __init jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq = pin; @@ -77,9 +77,3 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) irq = JMR3927_IRQ_ETHER0; return irq; } - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c index abab4852d158..321db265829c 100644 --- a/arch/mips/pci/fixup-rbtx4927.c +++ b/arch/mips/pci/fixup-rbtx4927.c @@ -36,7 +36,7 @@ #include #include -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +int __init rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq = pin; @@ -71,9 +71,3 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) } return irq; } - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/fixup-rbtx4938.c b/arch/mips/pci/fixup-rbtx4938.c index 39c995830384..a80579af609b 100644 --- a/arch/mips/pci/fixup-rbtx4938.c +++ b/arch/mips/pci/fixup-rbtx4938.c @@ -13,7 +13,7 @@ #include #include -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +int __init rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq = tx4938_pcic1_map_irq(dev, slot); @@ -51,12 +51,3 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) } return irq; } - -/* - * Do platform specific device initialization at pci_enable_device() time - */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} - diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index b8cdb192543a..b92a134ef124 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -1,11 +1,89 @@ +config TOSHIBA_JMR3927 + bool "Toshiba JMR-TX3927 board" + depends on MACH_TX39XX + select SOC_TX3927 + +config TOSHIBA_RBTX4927 + bool "Toshiba RBTX49[23]7 board" + depends on MACH_TX49XX + select SOC_TX4927 + help + This Toshiba board is based on the TX4927 processor. Say Y here to + support this machine type + +config TOSHIBA_RBTX4938 + bool "Toshiba RBTX4938 board" + depends on MACH_TX49XX + select SOC_TX4938 + help + This Toshiba board is based on the TX4938 processor. Say Y here to + support this machine type + +config SOC_TX3927 + bool + select CEVT_TXX9 + select DMA_NONCOHERENT + select HAS_TXX9_SERIAL + select HW_HAS_PCI + select IRQ_TXX9 + select SWAP_IO_SPACE + select SYS_HAS_CPU_TX39XX + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_BIG_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ + select GPIO_TXX9 + +config SOC_TX4927 + bool + select CEVT_R4K + select CSRC_R4K + select CEVT_TXX9 + select DMA_NONCOHERENT + select HAS_TXX9_SERIAL + select HW_HAS_PCI + select IRQ_CPU + select IRQ_TXX9 + select PCI_TX4927 + select SWAP_IO_SPACE + select SYS_HAS_CPU_TX49XX + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB + select GENERIC_HARDIRQS_NO__DO_IRQ + select GPIO_TXX9 + +config SOC_TX4938 + bool + select CEVT_R4K + select CSRC_R4K + select CEVT_TXX9 + select DMA_NONCOHERENT + select HAS_TXX9_SERIAL + select HW_HAS_PCI + select IRQ_CPU + select IRQ_TXX9 + select PCI_TX4927 + select SWAP_IO_SPACE + select SYS_HAS_CPU_TX49XX + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB + select GENERIC_HARDIRQS_NO__DO_IRQ + select GPIO_TXX9 + config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" - depends on PCI && (SYS_HAS_CPU_TX49XX || SYS_HAS_CPU_TX39XX) + depends on PCI && (MACH_TX39XX || MACH_TX49XX) select I8259 config PICMG_PCI_BACKPLANE_DEFAULT bool "Support for PICMG PCI Backplane" - depends on PCI && (SYS_HAS_CPU_TX49XX || SYS_HAS_CPU_TX39XX) + depends on PCI && (MACH_TX39XX || MACH_TX49XX) default y if !TOSHIBA_FPCIB0 if TOSHIBA_RBTX4938 diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index b80b6e072284..668fdaad6448 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -4,8 +4,8 @@ obj-y += setup.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_TOSHIBA_RBTX4927) += mem_tx4927.o irq_tx4927.o -obj-$(CONFIG_TOSHIBA_RBTX4938) += mem_tx4938.o irq_tx4938.o +obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o irq_tx4927.o +obj-$(CONFIG_SOC_TX4938) += mem_tx4938.o irq_tx4938.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o obj-$(CONFIG_KGDB) += dbgio.o diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c index 685ecc2ed551..6377bd8a9050 100644 --- a/arch/mips/txx9/generic/irq_tx4927.c +++ b/arch/mips/txx9/generic/irq_tx4927.c @@ -26,39 +26,12 @@ #include #include #include -#include -#ifdef CONFIG_TOSHIBA_RBTX4927 -#include -#endif +#include void __init tx4927_irq_init(void) { mips_cpu_irq_init(); txx9_irq_init(TX4927_IRC_REG); - set_irq_chained_handler(TX4927_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP7) /* cpu timer */ - do_IRQ(TX4927_IRQ_CPU_TIMER); - else if (pending & STATUSF_IP2) { /* tx4927 pic */ - int irq = txx9_irq(); -#ifdef CONFIG_TOSHIBA_RBTX4927 - if (irq == TX4927_IRQ_NEST_EXT_ON_PIC) - irq = toshiba_rbtx4927_irq_nested(irq); -#endif - if (unlikely(irq < 0)) { - spurious_interrupt(); - return; - } - do_IRQ(irq); - } else if (pending & STATUSF_IP0) /* user line 0 */ - do_IRQ(TX4927_IRQ_USER0); - else if (pending & STATUSF_IP1) /* user line 1 */ - do_IRQ(TX4927_IRQ_USER1); - else - spurious_interrupt(); + set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4927_IRC_INT, + handle_simple_irq); } diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c index 0886d9138818..5fc86c9c9d2f 100644 --- a/arch/mips/txx9/generic/irq_tx4938.c +++ b/arch/mips/txx9/generic/irq_tx4938.c @@ -14,35 +14,12 @@ #include #include #include -#include -#include +#include -void __init -tx4938_irq_init(void) +void __init tx4938_irq_init(void) { mips_cpu_irq_init(); txx9_irq_init(TX4938_IRC_REG); - set_irq_chained_handler(TX4938_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); -} - -int toshiba_rbtx4938_irq_nested(int irq); - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status(); - - if (pending & STATUSF_IP7) - do_IRQ(TX4938_IRQ_CPU_TIMER); - else if (pending & STATUSF_IP2) { - int irq = txx9_irq(); - if (irq == TX4938_IRQ_PIC_BEG + TX4938_IR_INT(0)) - irq = toshiba_rbtx4938_irq_nested(irq); - if (irq >= 0) - do_IRQ(irq); - else - spurious_interrupt(); - } else if (pending & STATUSF_IP1) - do_IRQ(TX4938_IRQ_USER1); - else if (pending & STATUSF_IP0) - do_IRQ(TX4938_IRQ_USER0); + set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4938_IRC_INT, + handle_simple_irq); } diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c index 8173faab99bb..0b92d8c13208 100644 --- a/arch/mips/txx9/generic/pci.c +++ b/arch/mips/txx9/generic/pci.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #ifdef CONFIG_TOSHIBA_FPCIB0 #include @@ -375,3 +376,13 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, #endif DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup); DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup); + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return txx9_board_vec->pci_map_irq(dev, slot, pin); +} diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 46a631177757..66ff74f80c6b 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -14,7 +14,16 @@ #include #include #include +#include +#include +#include +#include +#include +#include #include +#ifdef CONFIG_CPU_TX49XX +#include +#endif /* EBUSC settings of TX4927, etc. */ struct resource txx9_ce_res[8]; @@ -49,3 +58,163 @@ txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size) unsigned int txx9_master_clock; unsigned int txx9_cpu_clock; unsigned int txx9_gbus_clock; + + +/* Minimum CLK support */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "spi-baseclk")) + return (struct clk *)(txx9_gbus_clock / 2 / 4); + if (!strcmp(id, "imbus_clk")) + return (struct clk *)(txx9_gbus_clock / 2); + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + +extern struct txx9_board_vec jmr3927_vec; +extern struct txx9_board_vec rbtx4927_vec; +extern struct txx9_board_vec rbtx4937_vec; +extern struct txx9_board_vec rbtx4938_vec; + +/* board definitions */ +static struct txx9_board_vec *board_vecs[] __initdata = { +#ifdef CONFIG_TOSHIBA_JMR3927 + &jmr3927_vec, +#endif +#ifdef CONFIG_TOSHIBA_RBTX4927 + &rbtx4927_vec, + &rbtx4937_vec, +#endif +#ifdef CONFIG_TOSHIBA_RBTX4938 + &rbtx4938_vec, +#endif +}; +struct txx9_board_vec *txx9_board_vec __initdata; +static char txx9_system_type[32]; + +void __init prom_init_cmdline(void) +{ + int argc = (int)fw_arg0; + char **argv = (char **)fw_arg1; + int i; /* Always ignore the "-c" at argv[0] */ + + /* ignore all built-in args if any f/w args given */ + if (argc > 1) + *arcs_cmdline = '\0'; + + for (i = 1; i < argc; i++) { + if (i != 1) + strcat(arcs_cmdline, " "); + strcat(arcs_cmdline, argv[i]); + } +} + +void __init prom_init(void) +{ + int i; + +#ifdef CONFIG_CPU_TX39XX + mips_machtype = MACH_TOSHIBA_JMR3927; +#endif +#ifdef CONFIG_CPU_TX49XX + switch (TX4938_REV_PCODE()) { + case 0x4927: + mips_machtype = MACH_TOSHIBA_RBTX4927; + break; + case 0x4937: + mips_machtype = MACH_TOSHIBA_RBTX4937; + break; + case 0x4938: + mips_machtype = MACH_TOSHIBA_RBTX4938; + break; + } +#endif + for (i = 0; i < ARRAY_SIZE(board_vecs); i++) { + if (board_vecs[i]->type == mips_machtype) { + txx9_board_vec = board_vecs[i]; + strcpy(txx9_system_type, txx9_board_vec->system); + return txx9_board_vec->prom_init(); + } + } +} + +void __init prom_free_prom_memory(void) +{ +} + +const char *get_system_type(void) +{ + return txx9_system_type; +} + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +/* wrappers */ +void __init plat_mem_setup(void) +{ + txx9_board_vec->mem_setup(); +} + +void __init arch_init_irq(void) +{ + txx9_board_vec->irq_setup(); +} + +void __init plat_time_init(void) +{ + txx9_board_vec->time_init(); +} + +static int __init _txx9_arch_init(void) +{ + if (txx9_board_vec->arch_init) + txx9_board_vec->arch_init(); + return 0; +} +arch_initcall(_txx9_arch_init); + +static int __init _txx9_device_init(void) +{ + if (txx9_board_vec->device_init) + txx9_board_vec->device_init(); + return 0; +} +device_initcall(_txx9_device_init); + +int (*txx9_irq_dispatch)(int pending); +asmlinkage void plat_irq_dispatch(void) +{ + int pending = read_c0_status() & read_c0_cause() & ST0_IM; + int irq = txx9_irq_dispatch(pending); + + if (likely(irq >= 0)) + do_IRQ(irq); + else + spurious_interrupt(); +} diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile index 5f83ea375225..ba292c945669 100644 --- a/arch/mips/txx9/jmr3927/Makefile +++ b/arch/mips/txx9/jmr3927/Makefile @@ -2,7 +2,7 @@ # Makefile for TOSHIBA JMR-TX3927 board # -obj-y += prom.o init.o irq.o setup.o +obj-y += prom.o irq.o setup.o obj-$(CONFIG_KGDB) += kgdb_io.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/jmr3927/init.c b/arch/mips/txx9/jmr3927/init.c deleted file mode 100644 index 1bbb5343baf4..000000000000 --- a/arch/mips/txx9/jmr3927/init.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * arch/mips/jmr3927/common/init.c - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include - -extern void __init prom_init_cmdline(void); - -const char *get_system_type(void) -{ - return "Toshiba" -#ifdef CONFIG_TOSHIBA_JMR3927 - " JMR_TX3927" -#endif - ; -} - -extern void puts(const char *cp); - -void __init prom_init(void) -{ -#ifdef CONFIG_TOSHIBA_JMR3927 - /* CCFG */ - if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) - puts("Warning: TX3927 TLB off\n"); -#endif - - prom_init_cmdline(); - add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); -} diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c index b97d22e15da6..070c9a115e57 100644 --- a/arch/mips/txx9/jmr3927/irq.c +++ b/arch/mips/txx9/jmr3927/irq.c @@ -39,6 +39,7 @@ #include #include +#include #include #if JMR3927_IRQ_END > NR_IRQS @@ -77,37 +78,30 @@ static void unmask_irq_ioc(unsigned int irq) (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); } -asmlinkage void plat_irq_dispatch(void) -{ - unsigned long cp0_cause = read_c0_cause(); - int irq; - - if ((cp0_cause & CAUSEF_IP7) == 0) - return; - irq = (cp0_cause >> CAUSEB_IP2) & 0x0f; - - do_IRQ(irq + JMR3927_IRQ_IRC); -} - -static irqreturn_t jmr3927_ioc_interrupt(int irq, void *dev_id) +static int jmr3927_ioc_irqroute(void) { unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR); int i; for (i = 0; i < JMR3927_NR_IRQ_IOC; i++) { - if (istat & (1 << i)) { - irq = JMR3927_IRQ_IOC + i; - do_IRQ(irq); - } + if (istat & (1 << i)) + return JMR3927_IRQ_IOC + i; } - return IRQ_HANDLED; + return -1; } -static struct irqaction ioc_action = { - .handler = jmr3927_ioc_interrupt, - .mask = CPU_MASK_NONE, - .name = "IOC", -}; +static int jmr3927_irq_dispatch(int pending) +{ + int irq; + + if ((pending & CAUSEF_IP7) == 0) + return -1; + irq = (pending >> CAUSEB_IP2) & 0x0f; + irq += JMR3927_IRQ_IRC; + if (irq == JMR3927_IRQ_IOCINT) + irq = jmr3927_ioc_irqroute(); + return irq; +} #ifdef CONFIG_PCI static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id) @@ -127,8 +121,9 @@ static struct irqaction pcierr_action = { static void __init jmr3927_irq_init(void); -void __init arch_init_irq(void) +void __init jmr3927_irq_setup(void) { + txx9_irq_dispatch = jmr3927_irq_dispatch; /* Now, interrupt control disabled, */ /* all IRC interrupts are masked, */ /* all IRC interrupt mode are Low Active. */ @@ -146,7 +141,7 @@ void __init arch_init_irq(void) jmr3927_irq_init(); /* setup IOC interrupt 1 (PCI, MODEM) */ - setup_irq(JMR3927_IRQ_IOCINT, &ioc_action); + set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq); #ifdef CONFIG_PCI setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action); diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c index 8bc1049b622e..2cadb423face 100644 --- a/arch/mips/txx9/jmr3927/prom.c +++ b/arch/mips/txx9/jmr3927/prom.c @@ -35,42 +35,10 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include -#include - #include -#include - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - int prom_argc = fw_arg0; - char **prom_argv = (char **) fw_arg1; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { - strcpy(cp, prom_argv[actr]); - cp += strlen(prom_argv[actr]); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ - --cp; - *cp = '\0'; -} - -void __init prom_free_prom_memory(void) -{ -} +#include +#include #define TIMEOUT 0xffffff @@ -96,3 +64,13 @@ puts(const char *cp) prom_putchar('\r'); prom_putchar('\n'); } + +void __init jmr3927_prom_init(void) +{ + /* CCFG */ + if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) + puts("Warning: TX3927 TLB off\n"); + + prom_init_cmdline(); + add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); +} diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index baa8c8db9a94..128a4ae3e72e 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -34,15 +34,16 @@ #include #include #include -#include #include #ifdef CONFIG_SERIAL_TXX9 #include #endif +#include #include #include #include +#include #include #include #include @@ -83,7 +84,7 @@ static void jmr3927_machine_power_off(void) while (1); } -void __init plat_time_init(void) +static void __init jmr3927_time_init(void) { txx9_clockevent_init(TX3927_TMR_REG(0), TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0), @@ -97,7 +98,7 @@ void __init plat_time_init(void) extern char * __init prom_getcmdline(void); static void jmr3927_board_init(void); -void __init plat_mem_setup(void) +static void __init jmr3927_mem_setup(void) { char *argptr; @@ -233,6 +234,8 @@ static void __init tx3927_setup(void) { int i; + txx9_cpu_clock = JMR3927_CORECLK; + txx9_gbus_clock = JMR3927_GBUSCLK; /* SDRAMC are configured by PROM */ /* ROMC */ @@ -336,7 +339,6 @@ static int __init jmr3927_rtc_init(void) dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1); return IS_ERR(dev) ? PTR_ERR(dev) : 0; } -device_initcall(jmr3927_rtc_init); /* Watchdog support */ @@ -356,36 +358,22 @@ static int __init jmr3927_wdt_init(void) { return txx9_wdt_init(TX3927_TMR_REG(2)); } -device_initcall(jmr3927_wdt_init); -/* Minimum CLK support */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "imbus_clk")) - return (struct clk *)JMR3927_IMCLK; - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) +static void __init jmr3927_device_init(void) { + jmr3927_rtc_init(); + jmr3927_wdt_init(); } -EXPORT_SYMBOL(clk_disable); -unsigned long clk_get_rate(struct clk *clk) -{ - return (unsigned long)clk; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); +struct txx9_board_vec jmr3927_vec __initdata = { + .type = MACH_TOSHIBA_JMR3927, + .system = "Toshiba JMR_TX3927", + .prom_init = jmr3927_prom_init, + .mem_setup = jmr3927_mem_setup, + .irq_setup = jmr3927_irq_setup, + .time_init = jmr3927_time_init, + .device_init = jmr3927_device_init, +#ifdef CONFIG_PCI + .pci_map_irq = jmr3927_pci_map_irq, +#endif +}; diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c index bef1447aeed2..70f13211bc2a 100644 --- a/arch/mips/txx9/rbtx4927/irq.c +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -111,17 +111,10 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB #include #include #include +#include +#include #include -#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG 0 -#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_END 7 - -#define TOSHIBA_RBTX4927_IRQ_IOC_BEG ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG) /* 56 */ -#define TOSHIBA_RBTX4927_IRQ_IOC_END ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_END) /* 63 */ - -#define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC -#define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2) - static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq); static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq); @@ -136,34 +129,25 @@ static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { #define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL #define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL -int toshiba_rbtx4927_irq_nested(int sw_irq) +static int toshiba_rbtx4927_irq_nested(int sw_irq) { u8 level3; level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f; if (level3) - sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + fls(level3) - 1; + sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1; return (sw_irq); } -static struct irqaction toshiba_rbtx4927_irq_ioc_action = { - .handler = no_action, - .flags = IRQF_SHARED, - .mask = CPU_MASK_NONE, - .name = TOSHIBA_RBTX4927_IOC_NAME -}; - static void __init toshiba_rbtx4927_irq_ioc_init(void) { int i; - for (i = TOSHIBA_RBTX4927_IRQ_IOC_BEG; - i <= TOSHIBA_RBTX4927_IRQ_IOC_END; i++) + for (i = RBTX4927_IRQ_IOC; + i < RBTX4927_IRQ_IOC + RBTX4927_NR_IRQ_IOC; i++) set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type, handle_level_irq); - - setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC, - &toshiba_rbtx4927_irq_ioc_action); + set_irq_chained_handler(RBTX4927_IRQ_IOCINT, handle_simple_irq); } static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq) @@ -171,7 +155,7 @@ static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq) unsigned char v; v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); - v |= (1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); + v |= (1 << (irq - RBTX4927_IRQ_IOC)); writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); } @@ -180,15 +164,34 @@ static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq) unsigned char v; v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); - v &= ~(1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); + v &= ~(1 << (irq - RBTX4927_IRQ_IOC)); writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); mmiowb(); } -void __init arch_init_irq(void) + +static int rbtx4927_irq_dispatch(int pending) { - extern void tx4927_irq_init(void); + int irq; + + if (pending & STATUSF_IP7) /* cpu timer */ + irq = MIPS_CPU_IRQ_BASE + 7; + else if (pending & STATUSF_IP2) { /* tx4927 pic */ + irq = txx9_irq(); + if (irq == RBTX4927_IRQ_IOCINT) + irq = toshiba_rbtx4927_irq_nested(irq); + } else if (pending & STATUSF_IP0) /* user line 0 */ + irq = MIPS_CPU_IRQ_BASE + 0; + else if (pending & STATUSF_IP1) /* user line 1 */ + irq = MIPS_CPU_IRQ_BASE + 1; + else + irq = -1; + return irq; +} +void __init rbtx4927_irq_setup(void) +{ + txx9_irq_dispatch = rbtx4927_irq_dispatch; tx4927_irq_init(); toshiba_rbtx4927_irq_ioc_init(); /* Onboard 10M Ether: High Active */ diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c index 0020bbee838b..942e627d2dc1 100644 --- a/arch/mips/txx9/rbtx4927/prom.c +++ b/arch/mips/txx9/rbtx4927/prom.c @@ -30,62 +30,16 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include -#include #include -#include -#include -#include +#include +#include -void __init prom_init_cmdline(void) -{ - int argc = (int) fw_arg0; - char **argv = (char **) fw_arg1; - int i; /* Always ignore the "-c" at argv[0] */ - - /* ignore all built-in args if any f/w args given */ - if (argc > 1) { - *arcs_cmdline = '\0'; - } - - for (i = 1; i < argc; i++) { - if (i != 1) { - strcat(arcs_cmdline, " "); - } - strcat(arcs_cmdline, argv[i]); - } -} - -void __init prom_init(void) +void __init rbtx4927_prom_init(void) { extern int tx4927_get_mem_size(void); - extern char* toshiba_name; int msize; prom_init_cmdline(); - - if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) { - mips_machtype = MACH_TOSHIBA_RBTX4927; - toshiba_name = "TX4927"; - } else { - mips_machtype = MACH_TOSHIBA_RBTX4937; - toshiba_name = "TX4937"; - } - msize = tx4927_get_mem_size(); add_memory_region(0, msize << 20, BOOT_MEM_RAM); } - -void __init prom_free_prom_memory(void) -{ -} - -const char *get_system_type(void) -{ - return "Toshiba RBTX4927/RBTX4937"; -} - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 86b870abc319..c3566c39c26c 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -49,7 +49,6 @@ #include #include #include -#include #include #include @@ -76,8 +75,6 @@ char *prom_getcmdline(void); static int tx4927_ccfg_toeon = 1; -char *toshiba_name = ""; - #ifdef CONFIG_PCI static void __init tx4927_pci_setup(void) { @@ -171,15 +168,15 @@ static void __init tx4937_pci_setup(void) } } -static int __init rbtx4927_arch_init(void) +static void __init rbtx4927_arch_init(void) { if (mips_machtype == MACH_TOSHIBA_RBTX4937) tx4937_pci_setup(); else tx4927_pci_setup(); - return 0; } -arch_initcall(rbtx4927_arch_init); +#else +#define rbtx4927_arch_init NULL #endif /* CONFIG_PCI */ static void __noreturn wait_forever(void) @@ -223,14 +220,12 @@ void toshiba_rbtx4927_power_off(void) /* no return */ } -void __init plat_mem_setup(void) +static void __init rbtx4927_mem_setup(void) { int i; u32 cp0_config; char *argptr; - printk("CPU is %s\n", toshiba_name); - /* f/w leaves this on at startup */ clear_c0_status(ST0_ERL); @@ -323,7 +318,7 @@ void __init plat_mem_setup(void) req.iotype = UPIO_MEM; req.membase = (char *)(0xff1ff300 + i * 0x100); req.mapbase = 0xff1ff300 + i * 0x100; - req.irq = TX4927_IRQ_PIC_BEG + 8 + i; + req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i); req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; req.uartclk = 50000000; early_serial_txx9_setup(&req); @@ -352,7 +347,7 @@ void __init plat_mem_setup(void) #endif } -void __init plat_time_init(void) +static void __init rbtx4927_time_init(void) { mips_hpt_frequency = txx9_cpu_clock / 2; if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS) @@ -372,7 +367,6 @@ static int __init toshiba_rbtx4927_rtc_init(void) platform_device_register_simple("rtc-ds1742", -1, &res, 1); return IS_ERR(dev) ? PTR_ERR(dev) : 0; } -device_initcall(toshiba_rbtx4927_rtc_init); static int __init rbtx4927_ne_init(void) { @@ -391,7 +385,6 @@ static int __init rbtx4927_ne_init(void) res, ARRAY_SIZE(res)); return IS_ERR(dev) ? PTR_ERR(dev) : 0; } -device_initcall(rbtx4927_ne_init); /* Watchdog support */ @@ -411,36 +404,37 @@ static int __init rbtx4927_wdt_init(void) { return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); } -device_initcall(rbtx4927_wdt_init); - -/* Minimum CLK support */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "imbus_clk")) - return (struct clk *)50000000; - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); -void clk_disable(struct clk *clk) +static void __init rbtx4927_device_init(void) { + toshiba_rbtx4927_rtc_init(); + rbtx4927_ne_init(); + rbtx4927_wdt_init(); } -EXPORT_SYMBOL(clk_disable); -unsigned long clk_get_rate(struct clk *clk) -{ - return (unsigned long)clk; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); +struct txx9_board_vec rbtx4927_vec __initdata = { + .type = MACH_TOSHIBA_RBTX4927, + .system = "Toshiba RBTX4927", + .prom_init = rbtx4927_prom_init, + .mem_setup = rbtx4927_mem_setup, + .irq_setup = rbtx4927_irq_setup, + .time_init = rbtx4927_time_init, + .device_init = rbtx4927_device_init, + .arch_init = rbtx4927_arch_init, +#ifdef CONFIG_PCI + .pci_map_irq = rbtx4927_pci_map_irq, +#endif +}; +struct txx9_board_vec rbtx4937_vec __initdata = { + .type = MACH_TOSHIBA_RBTX4937, + .system = "Toshiba RBTX4937", + .prom_init = rbtx4927_prom_init, + .mem_setup = rbtx4927_mem_setup, + .irq_setup = rbtx4927_irq_setup, + .time_init = rbtx4927_time_init, + .device_init = rbtx4927_device_init, + .arch_init = rbtx4927_arch_init, +#ifdef CONFIG_PCI + .pci_map_irq = rbtx4927_pci_map_irq, +#endif +}; diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c index f4984820251a..3971a061657a 100644 --- a/arch/mips/txx9/rbtx4938/irq.c +++ b/arch/mips/txx9/rbtx4938/irq.c @@ -66,6 +66,8 @@ IRQ Device */ #include #include +#include +#include #include static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq); @@ -80,26 +82,17 @@ static struct irq_chip toshiba_rbtx4938_irq_ioc_type = { .unmask = toshiba_rbtx4938_irq_ioc_enable, }; -int -toshiba_rbtx4938_irq_nested(int sw_irq) +static int toshiba_rbtx4938_irq_nested(int sw_irq) { u8 level3; level3 = readb(rbtx4938_imstat_addr); if (level3) /* must use fls so onboard ATA has priority */ - sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1; - + sw_irq = RBTX4938_IRQ_IOC + fls(level3) - 1; return sw_irq; } -static struct irqaction toshiba_rbtx4938_irq_ioc_action = { - .handler = no_action, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = TOSHIBA_RBTX4938_IOC_NAME, -}; - /**********************************************************************************/ /* Functions for ioc */ /**********************************************************************************/ @@ -108,13 +101,12 @@ toshiba_rbtx4938_irq_ioc_init(void) { int i; - for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG; - i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++) + for (i = RBTX4938_IRQ_IOC; + i < RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC; i++) set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type, handle_level_irq); - setup_irq(RBTX4938_IRQ_IOCINT, - &toshiba_rbtx4938_irq_ioc_action); + set_irq_chained_handler(RBTX4938_IRQ_IOCINT, handle_simple_irq); } static void @@ -123,7 +115,7 @@ toshiba_rbtx4938_irq_ioc_enable(unsigned int irq) unsigned char v; v = readb(rbtx4938_imask_addr); - v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); + v |= (1 << (irq - RBTX4938_IRQ_IOC)); writeb(v, rbtx4938_imask_addr); mmiowb(); } @@ -134,15 +126,33 @@ toshiba_rbtx4938_irq_ioc_disable(unsigned int irq) unsigned char v; v = readb(rbtx4938_imask_addr); - v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); + v &= ~(1 << (irq - RBTX4938_IRQ_IOC)); writeb(v, rbtx4938_imask_addr); mmiowb(); } -void __init arch_init_irq(void) +static int rbtx4938_irq_dispatch(int pending) { - extern void tx4938_irq_init(void); + int irq; + + if (pending & STATUSF_IP7) + irq = MIPS_CPU_IRQ_BASE + 7; + else if (pending & STATUSF_IP2) { + irq = txx9_irq(); + if (irq == RBTX4938_IRQ_IOCINT) + irq = toshiba_rbtx4938_irq_nested(irq); + } else if (pending & STATUSF_IP1) + irq = MIPS_CPU_IRQ_BASE + 0; + else if (pending & STATUSF_IP0) + irq = MIPS_CPU_IRQ_BASE + 1; + else + irq = -1; + return irq; +} +void __init rbtx4938_irq_setup(void) +{ + txx9_irq_dispatch = rbtx4938_irq_dispatch; /* Now, interrupt control disabled, */ /* all IRC interrupts are masked, */ /* all IRC interrupt mode are Low Active. */ diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c index 134fcc2dc7d2..fbb37458ddb2 100644 --- a/arch/mips/txx9/rbtx4938/prom.c +++ b/arch/mips/txx9/rbtx4938/prom.c @@ -11,34 +11,12 @@ */ #include -#include -#include #include - -#include #include -#include - -void __init prom_init_cmdline(void) -{ - int argc = (int) fw_arg0; - char **argv = (char **) fw_arg1; - int i; - - /* ignore all built-in args if any f/w args given */ - if (argc > 1) { - *arcs_cmdline = '\0'; - } - - for (i = 1; i < argc; i++) { - if (i != 1) { - strcat(arcs_cmdline, " "); - } - strcat(arcs_cmdline, argv[i]); - } -} +#include +#include -void __init prom_init(void) +void __init rbtx4938_prom_init(void) { extern int tx4938_get_mem_size(void); int msize; @@ -48,25 +26,4 @@ void __init prom_init(void) msize = tx4938_get_mem_size(); add_memory_region(0, msize << 20, BOOT_MEM_RAM); - - return; -} - -void __init prom_free_prom_memory(void) -{ -} - -void __init prom_fixup_mem_map(unsigned long start, unsigned long end) -{ - return; -} - -const char *get_system_type(void) -{ - return "Toshiba RBTX4938"; -} - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); } diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 144d2cada820..8306ba333dda 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include @@ -147,9 +146,9 @@ static void __init rbtx4938_pci_setup(void) #define SEEPROM3_CS 1 /* IOC */ #define SRTC_CS 2 /* IOC */ -#ifdef CONFIG_PCI static int __init rbtx4938_ethaddr_init(void) { +#ifdef CONFIG_PCI unsigned char dat[17]; unsigned char sum; int i; @@ -179,10 +178,9 @@ static int __init rbtx4938_ethaddr_init(void) platform_device_add(pdev)) platform_device_put(pdev); } +#endif /* CONFIG_PCI */ return 0; } -device_initcall(rbtx4938_ethaddr_init); -#endif /* CONFIG_PCI */ static void __init rbtx4938_spi_setup(void) { @@ -366,7 +364,7 @@ void __init tx4938_board_setup(void) #endif } -void __init plat_time_init(void) +static void __init rbtx4938_time_init(void) { mips_hpt_frequency = txx9_cpu_clock / 2; if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS) @@ -375,7 +373,7 @@ void __init plat_time_init(void) txx9_gbus_clock / 2); } -void __init plat_mem_setup(void) +static void __init rbtx4938_mem_setup(void) { unsigned long long pcfg; char *argptr; @@ -496,7 +494,6 @@ static int __init rbtx4938_ne_init(void) res, ARRAY_SIZE(res)); return IS_ERR(dev) ? PTR_ERR(dev) : 0; } -device_initcall(rbtx4938_ne_init); /* GPIO support */ @@ -587,14 +584,13 @@ static int __init rbtx4938_spi_init(void) return 0; } -static int __init rbtx4938_arch_init(void) +static void __init rbtx4938_arch_init(void) { txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16); gpiochip_add(&rbtx4938_spi_gpio_chip); rbtx4938_pci_setup(); - return rbtx4938_spi_init(); + rbtx4938_spi_init(); } -arch_initcall(rbtx4938_arch_init); /* Watchdog support */ @@ -614,38 +610,24 @@ static int __init rbtx4938_wdt_init(void) { return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); } -device_initcall(rbtx4938_wdt_init); - -/* Minimum CLK support */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "spi-baseclk")) - return (struct clk *)(txx9_gbus_clock / 2 / 4); - if (!strcmp(id, "imbus_clk")) - return (struct clk *)(txx9_gbus_clock / 2); - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); -unsigned long clk_get_rate(struct clk *clk) +static void __init rbtx4938_device_init(void) { - return (unsigned long)clk; + rbtx4938_ethaddr_init(); + rbtx4938_ne_init(); + rbtx4938_wdt_init(); } -EXPORT_SYMBOL(clk_get_rate); -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); +struct txx9_board_vec rbtx4938_vec __initdata = { + .type = MACH_TOSHIBA_RBTX4938, + .system = "Toshiba RBTX4938", + .prom_init = rbtx4938_prom_init, + .mem_setup = rbtx4938_mem_setup, + .irq_setup = rbtx4938_irq_setup, + .time_init = rbtx4938_time_init, + .device_init = rbtx4938_device_init, + .arch_init = rbtx4938_arch_init, +#ifdef CONFIG_PCI + .pci_map_irq = rbtx4938_pci_map_irq, +#endif +}; -- cgit v1.2.3 From bf744d417ff2fe1e8e386c7ad06e79c34a078642 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 11 Jul 2008 23:28:04 +0900 Subject: [MIPS] TXx9: Update and merge defconfigs Merge rbhma4200(RBTX4927/37) and rbhma4500(RBTX4938) defconfig into single rbtx49xx defconfig. And jmr3927 defconfig is also updated. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/configs/jmr3927_defconfig | 10 +- arch/mips/configs/rbhma4200_defconfig | 698 ------------------------------- arch/mips/configs/rbhma4500_defconfig | 763 --------------------------------- arch/mips/configs/rbtx49xx_defconfig | 767 ++++++++++++++++++++++++++++++++++ 4 files changed, 772 insertions(+), 1466 deletions(-) delete mode 100644 arch/mips/configs/rbhma4200_defconfig delete mode 100644 arch/mips/configs/rbhma4500_defconfig create mode 100644 arch/mips/configs/rbtx49xx_defconfig (limited to 'arch/mips') diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index ab16e67ff08b..9d5bd2a0af3d 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc9 -# Fri Jul 11 00:25:19 2008 +# Fri Jul 11 23:01:36 2008 # CONFIG_MIPS=y @@ -37,10 +37,11 @@ CONFIG_MIPS=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -CONFIG_TOSHIBA_JMR3927=y -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_MACH_TX39XX=y +# CONFIG_MACH_TX49XX is not set # CONFIG_WR_PPMC is not set +CONFIG_TOSHIBA_JMR3927=y +CONFIG_SOC_TX3927=y # CONFIG_TOSHIBA_FPCIB0 is not set CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -67,7 +68,6 @@ CONFIG_CPU_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_TXX9=y -CONFIG_MIPS_TX3927=y CONFIG_SWAP_IO_SPACE=y CONFIG_MIPS_L1_CACHE_SHIFT=5 diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig deleted file mode 100644 index e0af6a9f9f0c..000000000000 --- a/arch/mips/configs/rbhma4200_defconfig +++ /dev/null @@ -1,698 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc9 -# Thu Jul 10 23:52:40 2008 -# -CONFIG_MIPS=y - -# -# Machine selection -# -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_BCM47XX is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -CONFIG_TOSHIBA_RBTX4927=y -# CONFIG_TOSHIBA_RBTX4938 is not set -# CONFIG_WR_PPMC is not set -# CONFIG_TOSHIBA_FPCIB0 is not set -CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y -CONFIG_PCI_TX4927=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_TXX9=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -# CONFIG_HOTPLUG_CPU is not set -# CONFIG_NO_IOPORT is not set -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_TXX9=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_LOONGSON2 is not set -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -CONFIG_CPU_TX49XX=y -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_TX49XX=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_VIRT_TO_BUS=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_256 is not set -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_SECCOMP is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -# CONFIG_EXPERIMENTAL is not set -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -# CONFIG_PCSPKR_PLATFORM is not set -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y -# CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -# CONFIG_MODULE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCI_LEGACY is not set -CONFIG_MMU=y - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# A new alternative FireWire stack is available with EXPERIMENTAL=y -# -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_AX88796 is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NE2000=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_TXX9=y -CONFIG_HAS_TXX9_SERIAL=y -CONFIG_SERIAL_TXX9_NR_UARTS=6 -CONFIG_SERIAL_TXX9_CONSOLE=y -CONFIG_SERIAL_TXX9_STDSERIAL=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -CONFIG_DEVPORT=y -# CONFIG_I2C is not set -# CONFIG_SPI is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_TXX9_WDT=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -CONFIG_RTC_DRV_DS1742=y -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_HFSPLUS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig deleted file mode 100644 index 50aa1b641360..000000000000 --- a/arch/mips/configs/rbhma4500_defconfig +++ /dev/null @@ -1,763 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc9 -# Thu Jul 10 23:53:27 2008 -# -CONFIG_MIPS=y - -# -# Machine selection -# -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_BCM47XX is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -CONFIG_TOSHIBA_RBTX4938=y -# CONFIG_WR_PPMC is not set -# CONFIG_TOSHIBA_FPCIB0 is not set -CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y - -# -# Multiplex Pin Select -# -CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y -# CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set -# CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set -CONFIG_PCI_TX4927=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_TXX9=y -CONFIG_CSRC_R4K=y -CONFIG_GPIO_TXX9=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -# CONFIG_HOTPLUG_CPU is not set -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_GPIO=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_TXX9=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_LOONGSON2 is not set -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -CONFIG_CPU_TX49XX=y -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_TX49XX=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_VIRT_TO_BUS=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_256 is not set -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_SECCOMP is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -# CONFIG_EXPERIMENTAL is not set -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -# CONFIG_PCSPKR_PLATFORM is not set -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y -# CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -# CONFIG_MODULE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCI_LEGACY is not set -CONFIG_MMU=y - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# A new alternative FireWire stack is available with EXPERIMENTAL=y -# -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_AX88796 is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NE2000=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -CONFIG_TC35815=y -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139TOO is not set -# CONFIG_R6040 is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_TXX9=y -CONFIG_HAS_TXX9_SERIAL=y -CONFIG_SERIAL_TXX9_NR_UARTS=6 -CONFIG_SERIAL_TXX9_CONSOLE=y -CONFIG_SERIAL_TXX9_STDSERIAL=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -CONFIG_DEVPORT=y -# CONFIG_I2C is not set -CONFIG_SPI=y -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -CONFIG_SPI_TXX9=y - -# -# SPI Protocol Masters -# -CONFIG_SPI_AT25=y -# CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_GPIO_MCP23S08 is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_TXX9_WDT=m - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -# CONFIG_RTC_DRV_TEST is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_R9701 is not set -CONFIG_RTC_DRV_RS5C348=y - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_HFSPLUS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig new file mode 100644 index 000000000000..e42aed5a38bb --- /dev/null +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -0,0 +1,767 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc9 +# Fri Jul 11 23:03:21 2008 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +CONFIG_MACH_TX49XX=y +# CONFIG_WR_PPMC is not set +CONFIG_TOSHIBA_RBTX4927=y +CONFIG_TOSHIBA_RBTX4938=y +CONFIG_SOC_TX4927=y +CONFIG_SOC_TX4938=y +# CONFIG_TOSHIBA_FPCIB0 is not set +CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y + +# +# Multiplex Pin Select +# +CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y +# CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set +# CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set +CONFIG_PCI_TX4927=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_TXX9=y +CONFIG_CSRC_R4K=y +CONFIG_GPIO_TXX9=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_TXX9=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +CONFIG_CPU_TX49XX=y +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_TX49XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y +# CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +CONFIG_MMU=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# A new alternative FireWire stack is available with EXPERIMENTAL=y +# +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NE2000=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +CONFIG_TC35815=y +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139TOO is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_TXX9=y +CONFIG_HAS_TXX9_SERIAL=y +CONFIG_SERIAL_TXX9_NR_UARTS=6 +CONFIG_SERIAL_TXX9_CONSOLE=y +CONFIG_SERIAL_TXX9_STDSERIAL=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_TXX9=y + +# +# SPI Protocol Masters +# +CONFIG_SPI_AT25=y +# CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_TXX9_WDT=m + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +CONFIG_RTC_DRV_RS5C348=y + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +CONFIG_RTC_DRV_DS1742=y +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="" +CONFIG_SYS_SUPPORTS_KGDB=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3 From 5b438c44082d9f09fed10f3621fe8d5c93d3676d Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 10 Jul 2008 20:29:55 +0200 Subject: [MIPS] IP22/28: Add platform devices for HAL2 Create platform devices for hal2 and add option for selecting HAL2 alsa driver. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 5 +++++ arch/mips/sgi-ip22/ip22-platform.c | 7 +++++++ 2 files changed, 12 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 72baa1a70fcb..d23204e29e16 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -385,6 +385,8 @@ config SGI_IP28 select SGI_HAS_DS1286 select SGI_HAS_I8042 select SGI_HAS_INDYDOG + select SGI_HAS_HAL2 + select SGI_HAS_HAL2 select SGI_HAS_SEEQ select SGI_HAS_WD93 select SGI_HAS_ZILOG @@ -868,6 +870,9 @@ config SGI_HAS_DS1286 config SGI_HAS_INDYDOG bool +config SGI_HAS_HAL2 + bool + config SGI_HAS_SEEQ bool diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c index 28ffec8e5d1a..d93d07a8c317 100644 --- a/arch/mips/sgi-ip22/ip22-platform.c +++ b/arch/mips/sgi-ip22/ip22-platform.c @@ -175,3 +175,10 @@ static int __init sgiseeq_devinit(void) } device_initcall(sgiseeq_devinit); + +static int __init sgi_hal2_devinit(void) +{ + return IS_ERR(platform_device_register_simple("sgihal2", 0, NULL, 0)); +} + +device_initcall(sgi_hal2_devinit); -- cgit v1.2.3 From 9ecb1ff1b295a515b21d0ac83d8bd39b07335aab Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 11 Jul 2008 22:39:14 +0900 Subject: [MIPS] replace inline assembler to cpu_wait() Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/gt64120/wrppmc/reset.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/gt64120/wrppmc/reset.c b/arch/mips/gt64120/wrppmc/reset.c index c355cff38f6c..e66c87164a02 100644 --- a/arch/mips/gt64120/wrppmc/reset.c +++ b/arch/mips/gt64120/wrppmc/reset.c @@ -5,10 +5,12 @@ * * Copyright (C) 1997 Ralf Baechle */ +#include #include #include #include +#include void wrppmc_machine_restart(char *command) { @@ -32,11 +34,8 @@ void wrppmc_machine_halt(void) printk(KERN_NOTICE "You can safely turn off the power\n"); while (1) { - __asm__( - ".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0" - ); + if (cpu_wait) + cpu_wait(); } } -- cgit v1.2.3 From 3f16654f36723f5ef1ca38c4e2078ca377a0f86f Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 11 Jul 2008 22:39:18 +0900 Subject: [MIPS] remove wrppmc_machine_power_off() It can be replace wrppmc_machine_halt(). Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/gt64120/wrppmc/reset.c | 5 ----- arch/mips/gt64120/wrppmc/setup.c | 3 +-- 2 files changed, 1 insertion(+), 7 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/gt64120/wrppmc/reset.c b/arch/mips/gt64120/wrppmc/reset.c index e66c87164a02..cc5474b24f06 100644 --- a/arch/mips/gt64120/wrppmc/reset.c +++ b/arch/mips/gt64120/wrppmc/reset.c @@ -38,8 +38,3 @@ void wrppmc_machine_halt(void) cpu_wait(); } } - -void wrppmc_machine_power_off(void) -{ - wrppmc_machine_halt(); -} diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c index 728ef6a80edd..ca65c84031a7 100644 --- a/arch/mips/gt64120/wrppmc/setup.c +++ b/arch/mips/gt64120/wrppmc/setup.c @@ -98,11 +98,10 @@ void __init plat_mem_setup(void) { extern void wrppmc_machine_restart(char *command); extern void wrppmc_machine_halt(void); - extern void wrppmc_machine_power_off(void); _machine_restart = wrppmc_machine_restart; _machine_halt = wrppmc_machine_halt; - pm_power_off = wrppmc_machine_power_off; + pm_power_off = wrppmc_machine_halt; /* This makes the operations of 'in/out[bwl]' to the * physical address ( < KSEG0) can work via KSEG1 -- cgit v1.2.3 From efff4ae259b8f750ea426d3084007f85c0a15a85 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 11 Jul 2008 22:45:21 +0900 Subject: [MIPS] cmbvr4133: Remove support It cannot be built for a long time and nobody maintains it. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 6 - arch/mips/pci/Makefile | 1 - arch/mips/pci/fixup-vr4133.c | 194 ---------------------- arch/mips/vr41xx/Kconfig | 17 -- arch/mips/vr41xx/nec-cmbvr4133/Makefile | 8 - arch/mips/vr41xx/nec-cmbvr4133/init.c | 65 -------- arch/mips/vr41xx/nec-cmbvr4133/irq.c | 46 ------ arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c | 249 ----------------------------- arch/mips/vr41xx/nec-cmbvr4133/setup.c | 89 ----------- 9 files changed, 675 deletions(-) delete mode 100644 arch/mips/pci/fixup-vr4133.c delete mode 100644 arch/mips/vr41xx/nec-cmbvr4133/Makefile delete mode 100644 arch/mips/vr41xx/nec-cmbvr4133/init.c delete mode 100644 arch/mips/vr41xx/nec-cmbvr4133/irq.c delete mode 100644 arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c delete mode 100644 arch/mips/vr41xx/nec-cmbvr4133/setup.c (limited to 'arch/mips') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index d319cd624135..c4a3098a58c6 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -354,12 +354,6 @@ load-$(CONFIG_LASAT) += 0xffffffff80000000 core-$(CONFIG_MACH_VR41XX) += arch/mips/vr41xx/common/ cflags-$(CONFIG_MACH_VR41XX) += -Iinclude/asm-mips/mach-vr41xx -# -# NEC VR4133 -# -core-$(CONFIG_NEC_CMBVR4133) += arch/mips/vr41xx/nec-cmbvr4133/ -load-$(CONFIG_NEC_CMBVR4133) += 0xffffffff80100000 - # # ZAO Networks Capcella (VR4131) # diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 875b643438c0..57e34cafa497 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_MIPS_MSC) += ops-msc.o obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o -obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c deleted file mode 100644 index 34e651bd2b5e..000000000000 --- a/arch/mips/pci/fixup-vr4133.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * arch/mips/pci/fixup-vr4133.c - * - * The NEC CMB-VR4133 Board specific PCI fixups. - * - * Author: Yoichi Yuasa and - * Alex Sapkov - * - * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Modified for support in 2.6 - * Author: Manish Lachwani (mlachwani@mvista.com) - * - */ -#include -#include -#include - -#include -#include -#include - -extern int vr4133_rockhopper; -extern void ali_m1535plus_init(struct pci_dev *dev); -extern void ali_m5229_init(struct pci_dev *dev); - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - /* - * We have to reset AMD PCnet adapter on Rockhopper since - * PMON leaves it enabled and generating interrupts. This leads - * to a lock if some PCI device driver later enables the IRQ line - * shared with PCnet and there is no AMD PCnet driver to catch its - * interrupts. - */ -#ifdef CONFIG_ROCKHOPPER - if (dev->vendor == PCI_VENDOR_ID_AMD && - dev->device == PCI_DEVICE_ID_AMD_LANCE) { - inl(pci_resource_start(dev, 0) + 0x18); - } -#endif - - /* - * we have to open the bridges' windows down to 0 because otherwise - * we cannot access ISA south bridge I/O registers that get mapped from - * 0. for example, 8259 PIC would be unaccessible without that - */ - if(dev->vendor == PCI_VENDOR_ID_INTEL && dev->device == PCI_DEVICE_ID_INTEL_S21152BB) { - pci_write_config_byte(dev, PCI_IO_BASE, 0); - if(dev->bus->number == 0) { - pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0); - } else { - pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 1); - } - } - - return 0; -} - -/* - * M1535 IRQ mapping - * Feel free to change this, although it shouldn't be needed - */ -#define M1535_IRQ_INTA 7 -#define M1535_IRQ_INTB 9 -#define M1535_IRQ_INTC 10 -#define M1535_IRQ_INTD 11 - -#define M1535_IRQ_USB 9 -#define M1535_IRQ_IDE 14 -#define M1535_IRQ_IDE2 15 -#define M1535_IRQ_PS2 12 -#define M1535_IRQ_RTC 8 -#define M1535_IRQ_FDC 6 -#define M1535_IRQ_AUDIO 5 -#define M1535_IRQ_COM1 4 -#define M1535_IRQ_COM2 4 -#define M1535_IRQ_IRDA 3 -#define M1535_IRQ_KBD 1 -#define M1535_IRQ_TMR 0 - -/* Rockhopper "slots" assignment; this is hard-coded ... */ -#define ROCKHOPPER_M5451_SLOT 1 -#define ROCKHOPPER_M1535_SLOT 2 -#define ROCKHOPPER_M5229_SLOT 11 -#define ROCKHOPPER_M5237_SLOT 15 -#define ROCKHOPPER_PMU_SLOT 12 -/* ... and hard-wired. */ -#define ROCKHOPPER_PCI1_SLOT 3 -#define ROCKHOPPER_PCI2_SLOT 4 -#define ROCKHOPPER_PCI3_SLOT 5 -#define ROCKHOPPER_PCI4_SLOT 6 -#define ROCKHOPPER_PCNET_SLOT 1 - -#define M1535_IRQ_MASK(n) (1 << (n)) - -#define M1535_IRQ_EDGE (M1535_IRQ_MASK(M1535_IRQ_TMR) | \ - M1535_IRQ_MASK(M1535_IRQ_KBD) | \ - M1535_IRQ_MASK(M1535_IRQ_COM1) | \ - M1535_IRQ_MASK(M1535_IRQ_COM2) | \ - M1535_IRQ_MASK(M1535_IRQ_IRDA) | \ - M1535_IRQ_MASK(M1535_IRQ_RTC) | \ - M1535_IRQ_MASK(M1535_IRQ_FDC) | \ - M1535_IRQ_MASK(M1535_IRQ_PS2)) - -#define M1535_IRQ_LEVEL (M1535_IRQ_MASK(M1535_IRQ_IDE) | \ - M1535_IRQ_MASK(M1535_IRQ_USB) | \ - M1535_IRQ_MASK(M1535_IRQ_INTA) | \ - M1535_IRQ_MASK(M1535_IRQ_INTB) | \ - M1535_IRQ_MASK(M1535_IRQ_INTC) | \ - M1535_IRQ_MASK(M1535_IRQ_INTD)) - -struct irq_map_entry { - u16 bus; - u8 slot; - u8 irq; -}; -static struct irq_map_entry int_map[] = { - {1, ROCKHOPPER_M5451_SLOT, M1535_IRQ_AUDIO}, /* Audio controller */ - {1, ROCKHOPPER_PCI1_SLOT, M1535_IRQ_INTD}, /* PCI slot #1 */ - {1, ROCKHOPPER_PCI2_SLOT, M1535_IRQ_INTC}, /* PCI slot #2 */ - {1, ROCKHOPPER_M5237_SLOT, M1535_IRQ_USB}, /* USB host controller */ - {1, ROCKHOPPER_M5229_SLOT, IDE_PRIMARY_IRQ}, /* IDE controller */ - {2, ROCKHOPPER_PCNET_SLOT, M1535_IRQ_INTD}, /* AMD Am79c973 on-board - ethernet */ - {2, ROCKHOPPER_PCI3_SLOT, M1535_IRQ_INTB}, /* PCI slot #3 */ - {2, ROCKHOPPER_PCI4_SLOT, M1535_IRQ_INTC} /* PCI slot #4 */ -}; - -static int pci_intlines[] = - { M1535_IRQ_INTA, M1535_IRQ_INTB, M1535_IRQ_INTC, M1535_IRQ_INTD }; - -/* Determine the Rockhopper IRQ line number for the PCI device */ -int rockhopper_get_irq(struct pci_dev *dev, u8 pin, u8 slot) -{ - struct pci_bus *bus; - int i; - - bus = dev->bus; - if (bus == NULL) - return -1; - - for (i = 0; i < ARRAY_SIZE(int_map); i++) { - if (int_map[i].bus == bus->number && int_map[i].slot == slot) { - int line; - for (line = 0; line < 4; line++) - if (pci_intlines[line] == int_map[i].irq) - break; - if (line < 4) - return pci_intlines[(line + (pin - 1)) % 4]; - else - return int_map[i].irq; - } - } - return -1; -} - -#ifdef CONFIG_ROCKHOPPER -void i8259_init(void) -{ - init_i8259_irqs(); - - outb(0x00, 0x4d0); - outb(0x02, 0x4d1); /* USB IRQ9 is level */ -} -#endif - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - pci_probe_only = 1; - -#ifdef CONFIG_ROCKHOPPER - if( dev->bus->number == 1 && vr4133_rockhopper ) { - if(slot == ROCKHOPPER_PCI1_SLOT || slot == ROCKHOPPER_PCI2_SLOT) - dev->irq = CMBVR41XX_INTA_IRQ; - else - dev->irq = rockhopper_get_irq(dev, pin, slot); - } else - dev->irq = CMBVR41XX_INTA_IRQ; -#else - dev->irq = CMBVR41XX_INTA_IRQ; -#endif - - return dev->irq; -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, ali_m1535plus_init); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, ali_m5229_init); - - diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig index 559acc09c819..c1be6b37fb2a 100644 --- a/arch/mips/vr41xx/Kconfig +++ b/arch/mips/vr41xx/Kconfig @@ -23,16 +23,6 @@ config IBM_WORKPAD select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN -config NEC_CMBVR4133 - bool "NEC CMB-VR4133" - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select IRQ_CPU - select HW_HAS_PCI - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - config TANBAC_TB022X bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM" select CEVT_R4K @@ -73,13 +63,6 @@ config ZAO_CAPCELLA endchoice -config ROCKHOPPER - bool "Support for Rockhopper base board" - depends on NEC_CMBVR4133 - select PCI_VR41XX - select I8259 - select HAVE_STD_PC_SERIAL_PORT - choice prompt "Base board type" depends on TANBAC_TB022X diff --git a/arch/mips/vr41xx/nec-cmbvr4133/Makefile b/arch/mips/vr41xx/nec-cmbvr4133/Makefile deleted file mode 100644 index 5835cae54aca..000000000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the NEC-CMBVR4133 -# - -obj-y := init.o setup.o - -obj-$(CONFIG_PCI) += m1535plus.o -obj-$(CONFIG_ROCKHOPPER) += irq.o diff --git a/arch/mips/vr41xx/nec-cmbvr4133/init.c b/arch/mips/vr41xx/nec-cmbvr4133/init.c deleted file mode 100644 index 7c5e18ee2231..000000000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/init.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * arch/mips/vr41xx/nec-cmbvr4133/init.c - * - * PROM library initialisation code for NEC CMB-VR4133 board. - * - * Author: Yoichi Yuasa and - * Jun Sun and - * Alex Sapkov - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for NEC-CMBVR4133 in 2.6 - * Manish Lachwani (mlachwani@mvista.com) - */ - -#ifdef CONFIG_ROCKHOPPER -#include -#include - -#define PCICONFDREG 0xaf000c14 -#define PCICONFAREG 0xaf000c18 - -void disable_pcnet(void) -{ - u32 data; - - /* - * Workaround for the bug in PMON on VR4133. PMON leaves - * AMD PCNet controller (on Rockhopper) initialized and running in - * bus master mode. We have do disable it before doing any - * further initialization. Or we get problems with PCI bus 2 - * and random lockups and crashes. - */ - - writel((2 << 16) | - (PCI_DEVFN(1, 0) << 8) | - (0 & 0xfc) | - 1UL, - PCICONFAREG); - - data = readl(PCICONFDREG); - - writel((2 << 16) | - (PCI_DEVFN(1, 0) << 8) | - (4 & 0xfc) | - 1UL, - PCICONFAREG); - - data = readl(PCICONFDREG); - - writel((2 << 16) | - (PCI_DEVFN(1, 0) << 8) | - (4 & 0xfc) | - 1UL, - PCICONFAREG); - - data &= ~4; - - writel(data, PCICONFDREG); -} -#endif - diff --git a/arch/mips/vr41xx/nec-cmbvr4133/irq.c b/arch/mips/vr41xx/nec-cmbvr4133/irq.c deleted file mode 100644 index 7d2d076b0f54..000000000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/irq.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/mips/vr41xx/nec-cmbvr4133/irq.c - * - * Interrupt routines for the NEC CMB-VR4133 board. - * - * Author: Yoichi Yuasa and - * Alex Sapkov - * - * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for NEC-CMBVR4133 in 2.6 - * Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include -#include - -#include -#include -#include - -extern int vr4133_rockhopper; - -static int i8259_get_irq_number(int irq) -{ - return i8259_irq(); -} - -void __init rockhopper_init_irq(void) -{ - int i; - - if(!vr4133_rockhopper) { - printk(KERN_ERR "Not a Rockhopper Board \n"); - return; - } - - vr41xx_set_irq_trigger(CMBVR41XX_INTC_PIN, TRIGGER_LEVEL, SIGNAL_THROUGH); - vr41xx_set_irq_level(CMBVR41XX_INTC_PIN, LEVEL_HIGH); - vr41xx_cascade_irq(CMBVR41XX_INTC_IRQ, i8259_get_irq_number); -} diff --git a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c b/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c deleted file mode 100644 index 1341f3287d04..000000000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c - * - * Initialize for ALi M1535+(included M5229 and M5237). - * - * Author: Yoichi Yuasa and - * Alex Sapkov - * - * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for NEC-CMBVR4133 in 2.6 - * Author: Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include - -#include -#include -#include - -#define CONFIG_PORT(port) ((port) ? 0x3f0 : 0x370) -#define DATA_PORT(port) ((port) ? 0x3f1 : 0x371) -#define INDEX_PORT(port) CONFIG_PORT(port) - -#define ENTER_CONFIG_MODE(port) \ - do { \ - outb_p(0x51, CONFIG_PORT(port)); \ - outb_p(0x23, CONFIG_PORT(port)); \ - } while(0) - -#define SELECT_LOGICAL_DEVICE(port, dev_no) \ - do { \ - outb_p(0x07, INDEX_PORT(port)); \ - outb_p((dev_no), DATA_PORT(port)); \ - } while(0) - -#define WRITE_CONFIG_DATA(port, index, data) \ - do { \ - outb_p((index), INDEX_PORT(port)); \ - outb_p((data), DATA_PORT(port)); \ - } while(0) - -#define EXIT_CONFIG_MODE(port) outb(0xbb, CONFIG_PORT(port)) - -#define PCI_CONFIG_ADDR KSEG1ADDR(0x0f000c18) -#define PCI_CONFIG_DATA KSEG1ADDR(0x0f000c14) - -#ifdef CONFIG_BLK_DEV_FD - -void __devinit ali_m1535plus_fdc_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 0); /* FDC */ - WRITE_CONFIG_DATA(port, 0x30, 0x01); /* FDC: enable */ - WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x3f0 */ - WRITE_CONFIG_DATA(port, 0x61, 0xf0); - WRITE_CONFIG_DATA(port, 0x70, 0x06); /* IRQ: 6 */ - WRITE_CONFIG_DATA(port, 0x74, 0x02); /* DMA: channel 2 */ - WRITE_CONFIG_DATA(port, 0xf0, 0x08); - WRITE_CONFIG_DATA(port, 0xf1, 0x00); - WRITE_CONFIG_DATA(port, 0xf2, 0xff); - WRITE_CONFIG_DATA(port, 0xf4, 0x00); - EXIT_CONFIG_MODE(port); -} - -#endif - -void __devinit ali_m1535plus_parport_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 3); /* Parallel Port */ - WRITE_CONFIG_DATA(port, 0x30, 0x01); - WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x378 */ - WRITE_CONFIG_DATA(port, 0x61, 0x78); - WRITE_CONFIG_DATA(port, 0x70, 0x07); /* IRQ: 7 */ - WRITE_CONFIG_DATA(port, 0x74, 0x04); /* DMA: None */ - WRITE_CONFIG_DATA(port, 0xf0, 0x8c); /* IRQ polarity: Active Low */ - WRITE_CONFIG_DATA(port, 0xf1, 0xc5); - EXIT_CONFIG_MODE(port); -} - -void __devinit ali_m1535plus_keyboard_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 7); /* KEYBOARD */ - WRITE_CONFIG_DATA(port, 0x30, 0x01); /* KEYBOARD: eable */ - WRITE_CONFIG_DATA(port, 0x70, 0x01); /* IRQ: 1 */ - WRITE_CONFIG_DATA(port, 0x72, 0x0c); /* PS/2 Mouse IRQ: 12 */ - WRITE_CONFIG_DATA(port, 0xf0, 0x00); - EXIT_CONFIG_MODE(port); -} - -void __devinit ali_m1535plus_hotkey_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 0xc); /* HOTKEY */ - WRITE_CONFIG_DATA(port, 0x30, 0x00); - WRITE_CONFIG_DATA(port, 0xf0, 0x35); - WRITE_CONFIG_DATA(port, 0xf1, 0x14); - WRITE_CONFIG_DATA(port, 0xf2, 0x11); - WRITE_CONFIG_DATA(port, 0xf3, 0x71); - WRITE_CONFIG_DATA(port, 0xf5, 0x05); - EXIT_CONFIG_MODE(port); -} - -void ali_m1535plus_init(struct pci_dev *dev) -{ - pci_write_config_byte(dev, 0x40, 0x18); /* PCI Interface Control */ - pci_write_config_byte(dev, 0x41, 0xc0); /* PS2 keyb & mouse enable */ - pci_write_config_byte(dev, 0x42, 0x41); /* ISA bus cycle control */ - pci_write_config_byte(dev, 0x43, 0x00); /* ISA bus cycle control 2 */ - pci_write_config_byte(dev, 0x44, 0x5d); /* IDE enable & IRQ 14 */ - pci_write_config_byte(dev, 0x45, 0x0b); /* PCI int polling mode */ - pci_write_config_byte(dev, 0x47, 0x00); /* BIOS chip select control */ - - /* IRQ routing */ - pci_write_config_byte(dev, 0x48, 0x03); /* INTA IRQ10, INTB disable */ - pci_write_config_byte(dev, 0x49, 0x00); /* INTC and INTD disable */ - pci_write_config_byte(dev, 0x4a, 0x00); /* INTE and INTF disable */ - pci_write_config_byte(dev, 0x4b, 0x90); /* Audio IRQ11, Modem disable */ - - pci_write_config_word(dev, 0x50, 0x4000); /* Parity check IDE enable */ - pci_write_config_word(dev, 0x52, 0x0000); /* USB & RTC disable */ - pci_write_config_word(dev, 0x54, 0x0002); /* ??? no info */ - pci_write_config_word(dev, 0x56, 0x0002); /* PCS1J signal disable */ - - pci_write_config_byte(dev, 0x59, 0x00); /* PCSDS */ - pci_write_config_byte(dev, 0x5a, 0x00); - pci_write_config_byte(dev, 0x5b, 0x00); - pci_write_config_word(dev, 0x5c, 0x0000); - pci_write_config_byte(dev, 0x5e, 0x00); - pci_write_config_byte(dev, 0x5f, 0x00); - pci_write_config_word(dev, 0x60, 0x0000); - - pci_write_config_byte(dev, 0x6c, 0x00); - pci_write_config_byte(dev, 0x6d, 0x48); /* ROM address mapping */ - pci_write_config_byte(dev, 0x6e, 0x00); /* ??? what for? */ - - pci_write_config_byte(dev, 0x70, 0x12); /* Serial IRQ control */ - pci_write_config_byte(dev, 0x71, 0xEF); /* DMA channel select */ - pci_write_config_byte(dev, 0x72, 0x03); /* USB IDSEL */ - pci_write_config_byte(dev, 0x73, 0x00); /* ??? no info */ - - /* - * IRQ setup ALi M5237 USB Host Controller - * IRQ: 9 - */ - pci_write_config_byte(dev, 0x74, 0x01); /* USB IRQ9 */ - - pci_write_config_byte(dev, 0x75, 0x1f); /* IDE2 IRQ 15 */ - pci_write_config_byte(dev, 0x76, 0x80); /* ACPI disable */ - pci_write_config_byte(dev, 0x77, 0x40); /* Modem disable */ - pci_write_config_dword(dev, 0x78, 0x20000000); /* Pin select 2 */ - pci_write_config_byte(dev, 0x7c, 0x00); /* Pin select 3 */ - pci_write_config_byte(dev, 0x81, 0x00); /* ID read/write control */ - pci_write_config_byte(dev, 0x90, 0x00); /* PCI PM block control */ - pci_write_config_word(dev, 0xa4, 0x0000); /* PMSCR */ - -#ifdef CONFIG_BLK_DEV_FD - ali_m1535plus_fdc_init(1); -#endif - - ali_m1535plus_keyboard_init(1); - ali_m1535plus_hotkey_init(1); -} - -static inline void ali_config_writeb(u8 reg, u8 val, int devfn) -{ - u32 data; - int shift; - - writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR); - data = readl(PCI_CONFIG_DATA); - - shift = (reg & 3) << 3; - data &= ~(0xff << shift); - data |= (((u32)val) << shift); - - writel(data, PCI_CONFIG_DATA); -} - -static inline u8 ali_config_readb(u8 reg, int devfn) -{ - u32 data; - - writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR); - data = readl(PCI_CONFIG_DATA); - - return (u8)(data >> ((reg & 3) << 3)); -} - -static inline u16 ali_config_readw(u8 reg, int devfn) -{ - u32 data; - - writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR); - data = readl(PCI_CONFIG_DATA); - - return (u16)(data >> ((reg & 2) << 3)); -} - -int vr4133_rockhopper = 0; -void __init ali_m5229_preinit(void) -{ - if (ali_config_readw(PCI_VENDOR_ID, 16) == PCI_VENDOR_ID_AL && - ali_config_readw(PCI_DEVICE_ID, 16) == PCI_DEVICE_ID_AL_M1533) { - printk(KERN_INFO "Found an NEC Rockhopper \n"); - vr4133_rockhopper = 1; - /* - * Enable ALi M5229 IDE Controller (both channels) - * IDSEL: A27 - */ - ali_config_writeb(0x58, 0x4c, 16); - } -} - -void __init ali_m5229_init(struct pci_dev *dev) -{ - /* - * Enable Primary/Secondary Channel Cable Detect 40-Pin - */ - pci_write_config_word(dev, 0x4a, 0xc023); - - /* - * Set only the 3rd byteis for the master IDE's cycle and - * enable Internal IDE Function - */ - pci_write_config_byte(dev, 0x50, 0x23); /* Class code attr register */ - - pci_write_config_byte(dev, 0x09, 0xff); /* Set native mode & stuff */ - pci_write_config_byte(dev, 0x52, 0x00); /* use timing registers */ - pci_write_config_byte(dev, 0x58, 0x02); /* Primary addr setup timing */ - pci_write_config_byte(dev, 0x59, 0x22); /* Primary cmd block timing */ - pci_write_config_byte(dev, 0x5a, 0x22); /* Pr drv 0 R/W timing */ - pci_write_config_byte(dev, 0x5b, 0x22); /* Pr drv 1 R/W timing */ - pci_write_config_byte(dev, 0x5c, 0x02); /* Sec addr setup timing */ - pci_write_config_byte(dev, 0x5d, 0x22); /* Sec cmd block timing */ - pci_write_config_byte(dev, 0x5e, 0x22); /* Sec drv 0 R/W timing */ - pci_write_config_byte(dev, 0x5f, 0x22); /* Sec drv 1 R/W timing */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); - pci_write_config_word(dev, PCI_COMMAND, - PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | - PCI_COMMAND_IO); -} - diff --git a/arch/mips/vr41xx/nec-cmbvr4133/setup.c b/arch/mips/vr41xx/nec-cmbvr4133/setup.c deleted file mode 100644 index 7723d2011b08..000000000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/setup.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/mips/vr41xx/nec-cmbvr4133/setup.c - * - * Setup for the NEC CMB-VR4133. - * - * Author: Yoichi Yuasa and - * Alex Sapkov - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for CMBVR4133 board in 2.6 - * Author: Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include - -#include -#include -#include -#include - -#ifdef CONFIG_MTD -#include -#include -#include -#include - -static struct mtd_partition cmbvr4133_mtd_parts[] = { - { - .name = "User FS", - .size = 0x1be0000, - .offset = 0, - .mask_flags = 0, - }, - { - .name = "PMON", - .size = 0x140000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "User FS2", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - .mask_flags = 0, - } -}; - -#define number_partitions ARRAY_SIZE(cmbvr4133_mtd_parts) -#endif - -extern void i8259_init(void); - -static void __init nec_cmbvr4133_setup(void) -{ -#ifdef CONFIG_ROCKHOPPER - extern void disable_pcnet(void); - - disable_pcnet(); -#endif - set_io_port_base(KSEG1ADDR(0x16000000)); - -#ifdef CONFIG_PCI -#ifdef CONFIG_ROCKHOPPER - ali_m5229_preinit(); -#endif -#endif - -#ifdef CONFIG_ROCKHOPPER - rockhopper_init_irq(); -#endif - -#ifdef CONFIG_MTD - /* we use generic physmap mapping driver and we use partitions */ - physmap_configure(0x1C000000, 0x02000000, 4, NULL); - physmap_set_partitions(cmbvr4133_mtd_parts, number_partitions); -#endif - - /* 128 MB memory support */ - add_memory_region(0, 0x08000000, BOOT_MEM_RAM); - -#ifdef CONFIG_ROCKHOPPER - i8259_init(); -#endif -} -- cgit v1.2.3 From b03d7b18fd783f39e31560d568e7db954f3080af Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Fri, 11 Jul 2008 23:03:03 +0200 Subject: [MIPS] IP22: Add platform device for Indy volume buttons Create platform device for Indy volume buttons and remove button handling from ip22-reset.c Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip22/ip22-platform.c | 11 ++++++++ arch/mips/sgi-ip22/ip22-reset.c | 51 ++------------------------------------ 2 files changed, 13 insertions(+), 49 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c index d93d07a8c317..fc6df96305ed 100644 --- a/arch/mips/sgi-ip22/ip22-platform.c +++ b/arch/mips/sgi-ip22/ip22-platform.c @@ -182,3 +182,14 @@ static int __init sgi_hal2_devinit(void) } device_initcall(sgi_hal2_devinit); + +static int __init sgi_button_devinit(void) +{ + if (ip22_is_fullhouse()) + return 0; /* full house has no volume buttons */ + + return IS_ERR(platform_device_register_simple("sgiindybtns", + -1, NULL, 0)); +} + +device_initcall(sgi_button_devinit); diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c index a435b31cf031..4ad5c3393fd3 100644 --- a/arch/mips/sgi-ip22/ip22-reset.c +++ b/arch/mips/sgi-ip22/ip22-reset.c @@ -39,7 +39,7 @@ #define POWERDOWN_FREQ (HZ / 4) #define PANIC_FREQ (HZ / 8) -static struct timer_list power_timer, blink_timer, debounce_timer, volume_timer; +static struct timer_list power_timer, blink_timer, debounce_timer; #define MACHINE_PANICED 1 #define MACHINE_SHUTTING_DOWN 2 @@ -139,36 +139,6 @@ static inline void power_button(void) add_timer(&power_timer); } -void (*indy_volume_button)(int) = NULL; - -EXPORT_SYMBOL(indy_volume_button); - -static inline void volume_up_button(unsigned long data) -{ - del_timer(&volume_timer); - - if (indy_volume_button) - indy_volume_button(1); - - if (sgint->istat1 & SGINT_ISTAT1_PWR) { - volume_timer.expires = jiffies + (HZ / 100); - add_timer(&volume_timer); - } -} - -static inline void volume_down_button(unsigned long data) -{ - del_timer(&volume_timer); - - if (indy_volume_button) - indy_volume_button(-1); - - if (sgint->istat1 & SGINT_ISTAT1_PWR) { - volume_timer.expires = jiffies + (HZ / 100); - add_timer(&volume_timer); - } -} - static irqreturn_t panel_int(int irq, void *dev_id) { unsigned int buttons; @@ -190,25 +160,8 @@ static irqreturn_t panel_int(int irq, void *dev_id) * House. Only lowest 2 bits are used. Guiness uses upper four bits * for volume control". This is not true, all bits are pulled high * on fullhouse */ - if (ip22_is_fullhouse() || !(buttons & SGIOC_PANEL_POWERINTR)) { + if (!(buttons & SGIOC_PANEL_POWERINTR)) power_button(); - return IRQ_HANDLED; - } - /* TODO: mute/unmute */ - /* Volume up button was pressed */ - if (!(buttons & SGIOC_PANEL_VOLUPINTR)) { - init_timer(&volume_timer); - volume_timer.function = volume_up_button; - volume_timer.expires = jiffies + (HZ / 100); - add_timer(&volume_timer); - } - /* Volume down button was pressed */ - if (!(buttons & SGIOC_PANEL_VOLDNINTR)) { - init_timer(&volume_timer); - volume_timer.function = volume_down_button; - volume_timer.expires = jiffies + (HZ / 100); - add_timer(&volume_timer); - } return IRQ_HANDLED; } -- cgit v1.2.3 From 7a1fdf1946b641f7c2866b3386414657eeb88084 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 13 Jul 2008 19:51:55 +0900 Subject: [MIPS] txx9_board_vec set directly without mips_machtype Signed-off-by: Yoichi Yuasa Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 34 ++++++++-------------------------- 1 file changed, 8 insertions(+), 26 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 66ff74f80c6b..517828e1ec92 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -99,19 +99,6 @@ extern struct txx9_board_vec rbtx4927_vec; extern struct txx9_board_vec rbtx4937_vec; extern struct txx9_board_vec rbtx4938_vec; -/* board definitions */ -static struct txx9_board_vec *board_vecs[] __initdata = { -#ifdef CONFIG_TOSHIBA_JMR3927 - &jmr3927_vec, -#endif -#ifdef CONFIG_TOSHIBA_RBTX4927 - &rbtx4927_vec, - &rbtx4937_vec, -#endif -#ifdef CONFIG_TOSHIBA_RBTX4938 - &rbtx4938_vec, -#endif -}; struct txx9_board_vec *txx9_board_vec __initdata; static char txx9_system_type[32]; @@ -134,31 +121,26 @@ void __init prom_init_cmdline(void) void __init prom_init(void) { - int i; - #ifdef CONFIG_CPU_TX39XX - mips_machtype = MACH_TOSHIBA_JMR3927; + txx9_board_vec = &jmr3927_vec; #endif #ifdef CONFIG_CPU_TX49XX switch (TX4938_REV_PCODE()) { case 0x4927: - mips_machtype = MACH_TOSHIBA_RBTX4927; + txx9_board_vec = &rbtx4927_vec; break; case 0x4937: - mips_machtype = MACH_TOSHIBA_RBTX4937; + txx9_board_vec = &rbtx4937_vec; break; case 0x4938: - mips_machtype = MACH_TOSHIBA_RBTX4938; + txx9_board_vec = &rbtx4938_vec; break; } #endif - for (i = 0; i < ARRAY_SIZE(board_vecs); i++) { - if (board_vecs[i]->type == mips_machtype) { - txx9_board_vec = board_vecs[i]; - strcpy(txx9_system_type, txx9_board_vec->system); - return txx9_board_vec->prom_init(); - } - } + + strcpy(txx9_system_type, txx9_board_vec->system); + + return txx9_board_vec->prom_init(); } void __init prom_free_prom_memory(void) -- cgit v1.2.3 From a00fb6694f15b3bccf105f34f10bbcb6b47af67c Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 13 Jul 2008 19:54:08 +0900 Subject: [MIPS] txx9_cpu_clock setup move to rbtx4927_time_init() Signed-off-by: Yoichi Yuasa Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/rbtx4927/setup.c | 98 ++++++++++++++++++++--------------------- 1 file changed, 49 insertions(+), 49 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index c3566c39c26c..bba6ef9db068 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -252,55 +252,6 @@ static void __init rbtx4927_mem_setup(void) set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET); #endif - /* - * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. - * - * For TX4927: - * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1). - * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5) - * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3) - * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) - * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) - * i.e. S9[3]: ON (83MHz), OFF (100MHz) - * - * For TX4937: - * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) - * PCIDIVMODE[10] is 0. - * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8) - * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4) - * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9) - * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5) - * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) - * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) - * - */ - if (mips_machtype == MACH_TOSHIBA_RBTX4937) - switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) & - TX4938_CCFG_PCIDIVMODE_MASK) { - case TX4938_CCFG_PCIDIVMODE_8: - case TX4938_CCFG_PCIDIVMODE_4: - txx9_cpu_clock = 266666666; /* 266MHz */ - break; - case TX4938_CCFG_PCIDIVMODE_9: - case TX4938_CCFG_PCIDIVMODE_4_5: - txx9_cpu_clock = 300000000; /* 300MHz */ - break; - default: - txx9_cpu_clock = 333333333; /* 333MHz */ - } - else - switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) & - TX4927_CCFG_PCIDIVMODE_MASK) { - case TX4927_CCFG_PCIDIVMODE_2_5: - case TX4927_CCFG_PCIDIVMODE_5: - txx9_cpu_clock = 166666666; /* 166MHz */ - break; - default: - txx9_cpu_clock = 200000000; /* 200MHz */ - } - /* change default value to udelay/mdelay take reasonable time */ - loops_per_jiffy = txx9_cpu_clock / HZ / 2; - /* CCFG */ /* do reset on watchdog */ tx4927_ccfg_set(TX4927_CCFG_WR); @@ -349,6 +300,55 @@ static void __init rbtx4927_mem_setup(void) static void __init rbtx4927_time_init(void) { + /* + * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. + * + * For TX4927: + * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1). + * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5) + * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3) + * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) + * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) + * i.e. S9[3]: ON (83MHz), OFF (100MHz) + * + * For TX4937: + * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) + * PCIDIVMODE[10] is 0. + * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8) + * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4) + * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9) + * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5) + * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) + * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) + */ + if (mips_machtype == MACH_TOSHIBA_RBTX4937) + switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) & + TX4938_CCFG_PCIDIVMODE_MASK) { + case TX4938_CCFG_PCIDIVMODE_8: + case TX4938_CCFG_PCIDIVMODE_4: + txx9_cpu_clock = 266666666; /* 266MHz */ + break; + case TX4938_CCFG_PCIDIVMODE_9: + case TX4938_CCFG_PCIDIVMODE_4_5: + txx9_cpu_clock = 300000000; /* 300MHz */ + break; + default: + txx9_cpu_clock = 333333333; /* 333MHz */ + } + else + switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) & + TX4927_CCFG_PCIDIVMODE_MASK) { + case TX4927_CCFG_PCIDIVMODE_2_5: + case TX4927_CCFG_PCIDIVMODE_5: + txx9_cpu_clock = 166666666; /* 166MHz */ + break; + default: + txx9_cpu_clock = 200000000; /* 200MHz */ + } + + /* change default value to udelay/mdelay take reasonable time */ + loops_per_jiffy = txx9_cpu_clock / HZ / 2; + mips_hpt_frequency = txx9_cpu_clock / 2; if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS) txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL, -- cgit v1.2.3 From a38c47519832f22659244fd8437722b7aaa67f9a Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 13 Jul 2008 20:01:04 +0900 Subject: [MIPS] separate rbtx4927_arch_init() and rbtx4937_arch_init() Signed-off-by: Yoichi Yuasa Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/rbtx4927/setup.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index bba6ef9db068..b4c4178607c4 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -170,13 +170,16 @@ static void __init tx4937_pci_setup(void) static void __init rbtx4927_arch_init(void) { - if (mips_machtype == MACH_TOSHIBA_RBTX4937) - tx4937_pci_setup(); - else - tx4927_pci_setup(); + tx4927_pci_setup(); +} + +static void __init rbtx4937_arch_init(void) +{ + tx4937_pci_setup(); } #else #define rbtx4927_arch_init NULL +#define rbtx4937_arch_init NULL #endif /* CONFIG_PCI */ static void __noreturn wait_forever(void) @@ -433,7 +436,7 @@ struct txx9_board_vec rbtx4937_vec __initdata = { .irq_setup = rbtx4927_irq_setup, .time_init = rbtx4927_time_init, .device_init = rbtx4927_device_init, - .arch_init = rbtx4927_arch_init, + .arch_init = rbtx4937_arch_init, #ifdef CONFIG_PCI .pci_map_irq = rbtx4927_pci_map_irq, #endif -- cgit v1.2.3 From b6c4053610f04011bc0ecbc5a0417afe169b2693 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 13 Jul 2008 20:02:13 +0900 Subject: [MIPS] separate rbtx4927_time_init() and rbtx4937_time_init() Signed-off-by: Yoichi Yuasa Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/rbtx4927/setup.c | 78 ++++++++++++++++++++++++----------------- 1 file changed, 45 insertions(+), 33 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index b4c4178607c4..adc91c0bbb95 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -301,6 +301,18 @@ static void __init rbtx4927_mem_setup(void) #endif } +static void __init rbtx49x7_common_time_init(void) +{ + /* change default value to udelay/mdelay take reasonable time */ + loops_per_jiffy = txx9_cpu_clock / HZ / 2; + + mips_hpt_frequency = txx9_cpu_clock / 2; + if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS) + txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL, + TXX9_IRQ_BASE + 17, + 50000000); +} + static void __init rbtx4927_time_init(void) { /* @@ -313,6 +325,24 @@ static void __init rbtx4927_time_init(void) * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) * i.e. S9[3]: ON (83MHz), OFF (100MHz) + */ + switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) & + TX4927_CCFG_PCIDIVMODE_MASK) { + case TX4927_CCFG_PCIDIVMODE_2_5: + case TX4927_CCFG_PCIDIVMODE_5: + txx9_cpu_clock = 166666666; /* 166MHz */ + break; + default: + txx9_cpu_clock = 200000000; /* 200MHz */ + } + + rbtx49x7_common_time_init(); +} + +static void __init rbtx4937_time_init(void) +{ + /* + * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. * * For TX4937: * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) @@ -324,39 +354,21 @@ static void __init rbtx4927_time_init(void) * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) */ - if (mips_machtype == MACH_TOSHIBA_RBTX4937) - switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) & - TX4938_CCFG_PCIDIVMODE_MASK) { - case TX4938_CCFG_PCIDIVMODE_8: - case TX4938_CCFG_PCIDIVMODE_4: - txx9_cpu_clock = 266666666; /* 266MHz */ - break; - case TX4938_CCFG_PCIDIVMODE_9: - case TX4938_CCFG_PCIDIVMODE_4_5: - txx9_cpu_clock = 300000000; /* 300MHz */ - break; - default: - txx9_cpu_clock = 333333333; /* 333MHz */ - } - else - switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) & - TX4927_CCFG_PCIDIVMODE_MASK) { - case TX4927_CCFG_PCIDIVMODE_2_5: - case TX4927_CCFG_PCIDIVMODE_5: - txx9_cpu_clock = 166666666; /* 166MHz */ - break; - default: - txx9_cpu_clock = 200000000; /* 200MHz */ - } - - /* change default value to udelay/mdelay take reasonable time */ - loops_per_jiffy = txx9_cpu_clock / HZ / 2; + switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) & + TX4938_CCFG_PCIDIVMODE_MASK) { + case TX4938_CCFG_PCIDIVMODE_8: + case TX4938_CCFG_PCIDIVMODE_4: + txx9_cpu_clock = 266666666; /* 266MHz */ + break; + case TX4938_CCFG_PCIDIVMODE_9: + case TX4938_CCFG_PCIDIVMODE_4_5: + txx9_cpu_clock = 300000000; /* 300MHz */ + break; + default: + txx9_cpu_clock = 333333333; /* 333MHz */ + } - mips_hpt_frequency = txx9_cpu_clock / 2; - if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS) - txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL, - TXX9_IRQ_BASE + 17, - 50000000); + rbtx49x7_common_time_init(); } static int __init toshiba_rbtx4927_rtc_init(void) @@ -434,7 +446,7 @@ struct txx9_board_vec rbtx4937_vec __initdata = { .prom_init = rbtx4927_prom_init, .mem_setup = rbtx4927_mem_setup, .irq_setup = rbtx4927_irq_setup, - .time_init = rbtx4927_time_init, + .time_init = rbtx4937_time_init, .device_init = rbtx4927_device_init, .arch_init = rbtx4937_arch_init, #ifdef CONFIG_PCI -- cgit v1.2.3 From 6e68665e51b9937b132a990b9ae7f04118e64688 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 13 Jul 2008 20:04:18 +0900 Subject: [MIPS] remove machtype for group Toshiba Signed-off-by: Yoichi Yuasa Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/jmr3927/setup.c | 1 - arch/mips/txx9/rbtx4927/setup.c | 2 -- arch/mips/txx9/rbtx4938/setup.c | 1 - 3 files changed, 4 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 128a4ae3e72e..43a8dad22ef7 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -366,7 +366,6 @@ static void __init jmr3927_device_init(void) } struct txx9_board_vec jmr3927_vec __initdata = { - .type = MACH_TOSHIBA_JMR3927, .system = "Toshiba JMR_TX3927", .prom_init = jmr3927_prom_init, .mem_setup = jmr3927_mem_setup, diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index adc91c0bbb95..aba11f376a51 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -428,7 +428,6 @@ static void __init rbtx4927_device_init(void) } struct txx9_board_vec rbtx4927_vec __initdata = { - .type = MACH_TOSHIBA_RBTX4927, .system = "Toshiba RBTX4927", .prom_init = rbtx4927_prom_init, .mem_setup = rbtx4927_mem_setup, @@ -441,7 +440,6 @@ struct txx9_board_vec rbtx4927_vec __initdata = { #endif }; struct txx9_board_vec rbtx4937_vec __initdata = { - .type = MACH_TOSHIBA_RBTX4937, .system = "Toshiba RBTX4937", .prom_init = rbtx4927_prom_init, .mem_setup = rbtx4927_mem_setup, diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 8306ba333dda..2ef71adea827 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -619,7 +619,6 @@ static void __init rbtx4938_device_init(void) } struct txx9_board_vec rbtx4938_vec __initdata = { - .type = MACH_TOSHIBA_RBTX4938, .system = "Toshiba RBTX4938", .prom_init = rbtx4938_prom_init, .mem_setup = rbtx4938_mem_setup, -- cgit v1.2.3 From 4c642f3f5e9f3f1a2fcce2c3fa1a94bf80142202 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 13 Jul 2008 23:37:56 +0900 Subject: [MIPS] TXx9: rename asm-mips/mach-jmr3927 to asm-mips/mach-tx39xx Rename mach-jmr3927 directory to more proper name to make adding other platforms easier. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 2 +- arch/mips/txx9/generic/setup.c | 10 ++++++++++ arch/mips/txx9/jmr3927/setup.c | 4 ++-- 3 files changed, 13 insertions(+), 3 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index c4a3098a58c6..356453322b49 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -548,7 +548,7 @@ all-$(CONFIG_SNI_RM) := vmlinux.ecoff # Common TXx9 # core-$(CONFIG_MACH_TX39XX) += arch/mips/txx9/generic/ -cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-jmr3927 +cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-tx39xx load-$(CONFIG_MACH_TX39XX) += 0xffffffff80050000 core-$(CONFIG_MACH_TX49XX) += arch/mips/txx9/generic/ cflags-$(CONFIG_MACH_TX49XX) += -Iinclude/asm-mips/mach-tx49xx diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 517828e1ec92..452cb9ea12c0 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -200,3 +200,13 @@ asmlinkage void plat_irq_dispatch(void) else spurious_interrupt(); } + +/* see include/asm-mips/mach-tx39xx/mangle-port.h, for example. */ +#ifdef NEEDS_TXX9_SWIZZLE_ADDR_B +static unsigned long __swizzle_addr_none(unsigned long port) +{ + return port; +} +unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none; +EXPORT_SYMBOL(__swizzle_addr_b); +#endif diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 43a8dad22ef7..61edc4ac1dbc 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -315,7 +315,7 @@ static void __init tx3927_setup(void) } /* This trick makes rtc-ds1742 driver usable as is. */ -unsigned long __swizzle_addr_b(unsigned long port) +static unsigned long jmr3927_swizzle_addr_b(unsigned long port) { if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR) return port; @@ -326,7 +326,6 @@ unsigned long __swizzle_addr_b(unsigned long port) return port | 1; #endif } -EXPORT_SYMBOL(__swizzle_addr_b); static int __init jmr3927_rtc_init(void) { @@ -361,6 +360,7 @@ static int __init jmr3927_wdt_init(void) static void __init jmr3927_device_init(void) { + __swizzle_addr_b = jmr3927_swizzle_addr_b; jmr3927_rtc_init(); jmr3927_wdt_init(); } -- cgit v1.2.3 From 7b22609442a32050e37cec5f6735376af61e68a1 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 14 Jul 2008 00:15:04 +0900 Subject: [MIPS] TXx9: cleanup and fix some sparse warnings * Do not return void value * Make some functions static * Do not include unnecessary bootinfo.h Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 2 +- arch/mips/txx9/jmr3927/setup.c | 3 --- arch/mips/txx9/rbtx4927/setup.c | 16 +++------------- arch/mips/txx9/rbtx4938/setup.c | 13 +++---------- 4 files changed, 7 insertions(+), 27 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 452cb9ea12c0..5afc5d5cab03 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -140,7 +140,7 @@ void __init prom_init(void) strcpy(txx9_system_type, txx9_board_vec->system); - return txx9_board_vec->prom_init(); + txx9_board_vec->prom_init(); } void __init prom_free_prom_memory(void) diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 61edc4ac1dbc..5e35ef73c5a5 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -38,8 +38,6 @@ #ifdef CONFIG_SERIAL_TXX9 #include #endif - -#include #include #include #include @@ -95,7 +93,6 @@ static void __init jmr3927_time_init(void) #define DO_WRITE_THROUGH #define DO_ENABLE_CACHE -extern char * __init prom_getcmdline(void); static void jmr3927_board_init(void); static void __init jmr3927_mem_setup(void) diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index aba11f376a51..1657fd935da8 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -50,8 +50,6 @@ #include #include #include - -#include #include #include #include @@ -65,14 +63,6 @@ #include #endif -/* These functions are used for rebooting or halting the machine*/ -extern void toshiba_rbtx4927_restart(char *command); -extern void toshiba_rbtx4927_halt(void); -extern void toshiba_rbtx4927_power_off(void); -extern void toshiba_rbtx4927_irq_setup(void); - -char *prom_getcmdline(void); - static int tx4927_ccfg_toeon = 1; #ifdef CONFIG_PCI @@ -189,7 +179,7 @@ static void __noreturn wait_forever(void) (*cpu_wait)(); } -void toshiba_rbtx4927_restart(char *command) +static void toshiba_rbtx4927_restart(char *command) { printk(KERN_NOTICE "System Rebooting...\n"); @@ -209,7 +199,7 @@ void toshiba_rbtx4927_restart(char *command) /* no return */ } -void toshiba_rbtx4927_halt(void) +static void toshiba_rbtx4927_halt(void) { printk(KERN_NOTICE "System Halted\n"); local_irq_disable(); @@ -217,7 +207,7 @@ void toshiba_rbtx4927_halt(void) /* no return */ } -void toshiba_rbtx4927_power_off(void) +static void toshiba_rbtx4927_power_off(void) { toshiba_rbtx4927_halt(); /* no return */ diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 2ef71adea827..aaa987ae0f83 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include @@ -34,15 +33,9 @@ #include #include -extern char * __init prom_getcmdline(void); -/* These functions are used for rebooting or halting the machine*/ -extern void rbtx4938_machine_restart(char *command); -extern void rbtx4938_machine_halt(void); -extern void rbtx4938_machine_power_off(void); - static int tx4938_ccfg_toeon = 1; -void rbtx4938_machine_halt(void) +static void rbtx4938_machine_halt(void) { printk(KERN_NOTICE "System Halted\n"); local_irq_disable(); @@ -53,13 +46,13 @@ void rbtx4938_machine_halt(void) ".set\tmips0"); } -void rbtx4938_machine_power_off(void) +static void rbtx4938_machine_power_off(void) { rbtx4938_machine_halt(); /* no return */ } -void rbtx4938_machine_restart(char *command) +static void rbtx4938_machine_restart(char *command) { local_irq_disable(); -- cgit v1.2.3 From 9528356308ecd2fb6368472615996a8602c02964 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 11 Jul 2008 22:34:48 +0900 Subject: [MIPS] MTX-1 flash partition setup move to platform devices registration Signed-off-by: Yoichi Yuasa Acked-By: David Woodhouse Signed-off-by: Ralf Baechle --- arch/mips/au1000/mtx-1/platform.c | 51 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c index 9807be37c32f..8b5914d1241f 100644 --- a/arch/mips/au1000/mtx-1/platform.c +++ b/arch/mips/au1000/mtx-1/platform.c @@ -24,6 +24,9 @@ #include #include #include +#include +#include +#include static struct gpio_keys_button mtx1_gpio_button[] = { { @@ -85,10 +88,56 @@ static struct platform_device mtx1_gpio_leds = { } }; +static struct mtd_partition mtx1_mtd_partitions[] = { + { + .name = "filesystem", + .size = 0x01C00000, + .offset = 0, + }, + { + .name = "yamon", + .size = 0x00100000, + .offset = MTDPART_OFS_APPEND, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "kernel", + .size = 0x002c0000, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "yamon env", + .size = 0x00040000, + .offset = MTDPART_OFS_APPEND, + }, +}; + +static struct physmap_flash_data mtx1_flash_data = { + .width = 4, + .nr_parts = 4, + .parts = mtx1_mtd_partitions, +}; + +static struct resource mtx1_mtd_resource = { + .start = 0x1e000000, + .end = 0x1fffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mtx1_mtd = { + .name = "physmap-flash", + .dev = { + .platform_data = &mtx1_flash_data, + }, + .num_resources = 1, + .resource = &mtx1_mtd_resource, +}; + static struct __initdata platform_device * mtx1_devs[] = { &mtx1_gpio_leds, &mtx1_wdt, - &mtx1_button + &mtx1_button, + &mtx1_mtd, }; static int __init mtx1_register_devices(void) -- cgit v1.2.3 From c660729501894e0b88054ad4b66a5f98a1a2a37e Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 14 Jul 2008 15:11:40 +0200 Subject: [MIPS] Remove mips_machtype from ARC based machines This is the ARC part of the mips_machtype removal. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/fw/arc/identify.c | 11 ----------- arch/mips/jazz/setup.c | 3 +-- 2 files changed, 1 insertion(+), 13 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c index 23066985a734..0ce9acf10c39 100644 --- a/arch/mips/fw/arc/identify.c +++ b/arch/mips/fw/arc/identify.c @@ -22,7 +22,6 @@ struct smatch { char *arcname; char *liname; - int type; int flags; }; @@ -30,47 +29,38 @@ static struct smatch mach_table[] = { { .arcname = "SGI-IP22", .liname = "SGI Indy", - .type = MACH_SGI_IP22, .flags = PROM_FLAG_ARCS, }, { .arcname = "SGI-IP27", .liname = "SGI Origin", - .type = MACH_SGI_IP27, .flags = PROM_FLAG_ARCS, }, { .arcname = "SGI-IP28", .liname = "SGI IP28", - .type = MACH_SGI_IP28, .flags = PROM_FLAG_ARCS, }, { .arcname = "SGI-IP30", .liname = "SGI Octane", - .type = MACH_SGI_IP30, .flags = PROM_FLAG_ARCS, }, { .arcname = "SGI-IP32", .liname = "SGI O2", - .type = MACH_SGI_IP32, .flags = PROM_FLAG_ARCS, }, { .arcname = "Microsoft-Jazz", .liname = "Jazz MIPS_Magnum_4000", - .type = MACH_MIPS_MAGNUM_4000, .flags = 0, }, { .arcname = "PICA-61", .liname = "Jazz Acer_PICA_61", - .type = MACH_ACER_PICA_61, .flags = 0, }, { .arcname = "RM200PCI", .liname = "SNI RM200_PCI", - .type = MACH_SNI_RM200_PCI, .flags = PROM_FLAG_DONT_FREE_TEMP, }, { .arcname = "RM200PCI-R5K", .liname = "SNI RM200_PCI-R5K", - .type = MACH_SNI_RM200_PCI, .flags = PROM_FLAG_DONT_FREE_TEMP, } }; @@ -121,6 +111,5 @@ void __init prom_identify_arch(void) mach = string_to_mach(iname); system_type = mach->liname; - mips_machtype = mach->type; prom_flags = mach->flags; } diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index f136c8a8591c..f60524e8bc44 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -76,8 +76,7 @@ void __init plat_mem_setup(void) set_io_port_base(JAZZ_PORT_BASE); #ifdef CONFIG_EISA - if (mips_machtype == MACH_MIPS_MAGNUM_4000) - EISA_bus = 1; + EISA_bus = 1; #endif /* request I/O space for devices used on all i[345]86 PCs */ -- cgit v1.2.3 From 0b56fd8c7abbf85baeecb77be25c54d3c7d11587 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 14 Jul 2008 15:54:30 +0200 Subject: [MIPS] Remove mips_machtype from EMMA2RH machines This is the EMMA2RH part of the mips_machtype removal. [Ralf: Fixed to the #error statements] Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/emma2rh/common/prom.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/emma2rh/common/prom.c b/arch/mips/emma2rh/common/prom.c index 0f791eb6bb66..5e92b3a9c5b8 100644 --- a/arch/mips/emma2rh/common/prom.c +++ b/arch/mips/emma2rh/common/prom.c @@ -34,12 +34,11 @@ const char *get_system_type(void) { - switch (mips_machtype) { - case MACH_NEC_MARKEINS: - return "NEC EMMA2RH Mark-eins"; - default: - return "Unknown NEC board"; - } +#if defined(CONFIG_MARKEINS) + return "NEC EMMA2RH Mark-eins"; +#else +#error Unknown NEC board +#endif } /* [jsun@junsun.net] PMON passes arguments in C main() style */ @@ -63,10 +62,10 @@ void __init prom_init(void) } #if defined(CONFIG_MARKEINS) - mips_machtype = MACH_NEC_MARKEINS; add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM); +#else +#error Unknown NEC board #endif - } void __init prom_free_prom_memory(void) -- cgit v1.2.3 From b27418aa551a153e8bf1bd16cf93e5786f9590a9 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 14 Jul 2008 16:58:47 +0200 Subject: [MIPS] Remove mips_machtype for LASAT machines This is the LASAT part of the mips_machtype removal. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/lasat/interrupt.c | 21 ++++++++------------- arch/mips/lasat/lasat_board.c | 3 +-- arch/mips/lasat/prom.c | 8 +++----- arch/mips/lasat/serial.c | 3 +-- arch/mips/lasat/setup.c | 8 +++++--- arch/mips/pci/pci-lasat.c | 14 ++++---------- 6 files changed, 22 insertions(+), 35 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index a56c15026965..d1ac7a25c856 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -22,8 +22,8 @@ #include #include -#include #include +#include #include #include @@ -112,23 +112,18 @@ void __init arch_init_irq(void) { int i; - switch (mips_machtype) { - case MACH_LASAT_100: - lasat_int_status = (void *)LASAT_INT_STATUS_REG_100; - lasat_int_mask = (void *)LASAT_INT_MASK_REG_100; - lasat_int_mask_shift = LASATINT_MASK_SHIFT_100; - get_int_status = get_int_status_100; - *lasat_int_mask = 0; - break; - case MACH_LASAT_200: + if (IS_LASAT_200()) { lasat_int_status = (void *)LASAT_INT_STATUS_REG_200; lasat_int_mask = (void *)LASAT_INT_MASK_REG_200; lasat_int_mask_shift = LASATINT_MASK_SHIFT_200; get_int_status = get_int_status_200; *lasat_int_mask &= 0xffff; - break; - default: - panic("arch_init_irq: mips_machtype incorrect"); + } else { + lasat_int_status = (void *)LASAT_INT_STATUS_REG_100; + lasat_int_mask = (void *)LASAT_INT_MASK_REG_100; + lasat_int_mask_shift = LASATINT_MASK_SHIFT_100; + get_int_status = get_int_status_100; + *lasat_int_mask = 0; } mips_cpu_irq_init(); diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c index 31e328b3814d..577bb463a871 100644 --- a/arch/mips/lasat/lasat_board.c +++ b/arch/mips/lasat/lasat_board.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include "at93c.h" /* New model description table */ @@ -66,7 +65,7 @@ static void init_flash_sizes(void) ls[LASAT_MTD_SERVICE] = 0xC0000; ls[LASAT_MTD_NORMAL] = 0x100000; - if (mips_machtype == MACH_LASAT_100) { + if (!IS_LASAT_200()) { lasat_board_info.li_flash_base = 0x1e000000; lb[LASAT_MTD_BOOTLOADER] = 0x1e400000; diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c index 209edcc26f07..6acc6cb85f0a 100644 --- a/arch/mips/lasat/prom.c +++ b/arch/mips/lasat/prom.c @@ -86,18 +86,16 @@ void __init prom_init(void) setup_prom_vectors(); - if (current_cpu_data.cputype == CPU_R5000) { + if (IS_LASAT_200()) { printk(KERN_INFO "LASAT 200 board\n"); - mips_machtype = MACH_LASAT_200; lasat_ndelay_divider = LASAT_200_DIVIDER; + at93c = &at93c_defs[1]; } else { printk(KERN_INFO "LASAT 100 board\n"); - mips_machtype = MACH_LASAT_100; lasat_ndelay_divider = LASAT_100_DIVIDER; + at93c = &at93c_defs[0]; } - at93c = &at93c_defs[mips_machtype]; - lasat_init_board_info(); /* Read info from EEPROM */ /* Get the command line */ diff --git a/arch/mips/lasat/serial.c b/arch/mips/lasat/serial.c index 205bd397d75b..5bcb6e89ab78 100644 --- a/arch/mips/lasat/serial.c +++ b/arch/mips/lasat/serial.c @@ -23,7 +23,6 @@ #include #include -#include #include #include @@ -47,7 +46,7 @@ static __init int lasat_uart_add(void) if (!pdev) return -ENOMEM; - if (mips_machtype == MACH_LASAT_100) { + if (!IS_LASAT_200()) { lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_100); lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_100 * 8 - 1; lasat_serial_res[0].flags = IORESOURCE_MEM; diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c index e072da4ff3b3..dbd3163a85c2 100644 --- a/arch/mips/lasat/setup.c +++ b/arch/mips/lasat/setup.c @@ -127,9 +127,11 @@ void __init plat_time_init(void) void __init plat_mem_setup(void) { int i; - lasat_misc = &lasat_misc_info[mips_machtype]; + int lasat_type = IS_LASAT_200() ? 1 : 0; + + lasat_misc = &lasat_misc_info[lasat_type]; #ifdef CONFIG_PICVUE - picvue = &pvc_defs[mips_machtype]; + picvue = &pvc_defs[lasat_type]; #endif /* Set up panic notifier */ @@ -140,7 +142,7 @@ void __init plat_mem_setup(void) lasat_reboot_setup(); #ifdef CONFIG_DS1603 - ds1603 = &ds_defs[mips_machtype]; + ds1603 = &ds_defs[lasat_type]; #endif #ifdef DYNAMIC_SERIAL_INIT diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c index e70ae3236e0b..a98e543a514a 100644 --- a/arch/mips/pci/pci-lasat.c +++ b/arch/mips/pci/pci-lasat.c @@ -10,7 +10,7 @@ #include #include -#include +#include #include @@ -39,16 +39,10 @@ static int __init lasat_pci_setup(void) { printk(KERN_DEBUG "PCI: starting\n"); - switch (mips_machtype) { - case MACH_LASAT_100: - lasat_pci_controller.pci_ops = >64xxx_pci0_ops; - break; - case MACH_LASAT_200: + if (IS_LASAT_200()) lasat_pci_controller.pci_ops = &nile4_pci_ops; - break; - default: - panic("pcibios_init: mips_machtype incorrect"); - } + else + lasat_pci_controller.pci_ops = >64xxx_pci0_ops; register_pci_controller(&lasat_pci_controller); -- cgit v1.2.3 From f6f88e9bfb6ced9871ed65ebe85c371de3c9e4be Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 15 Jul 2008 22:08:52 +0200 Subject: generic-ipi: more merge fallout fix more API change fallout in recently merged upstream changes. Signed-off-by: Ingo Molnar --- arch/mips/oprofile/op_model_mipsxx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index b40df7d2cf44..54759f1669d3 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -313,7 +313,7 @@ static int __init mipsxx_init(void) if (!cpu_has_mipsmt_pertccounters) counters = counters_total_to_per_cpu(counters); #endif - on_each_cpu(reset_counters, (void *)(long)counters, 0, 1); + on_each_cpu(reset_counters, (void *)(long)counters, 1); op_model_mipsxx_ops.num_counters = counters; switch (current_cpu_type()) { @@ -382,7 +382,7 @@ static void mipsxx_exit(void) int counters = op_model_mipsxx_ops.num_counters; counters = counters_per_cpu_to_total(counters); - on_each_cpu(reset_counters, (void *)(long)counters, 0, 1); + on_each_cpu(reset_counters, (void *)(long)counters, 1); perf_irq = save_perf_irq; } -- cgit v1.2.3