From 292aa141277b142148d15bf28104f8890616e291 Mon Sep 17 00:00:00 2001 From: Stoyan Gaydarov Date: Wed, 27 Oct 2010 17:28:33 +0100 Subject: MN10300: BUG to BUG_ON changes Signed-off-by: Stoyan Gaydarov Signed-off-by: David Howells --- arch/mn10300/kernel/irq.c | 3 +-- arch/mn10300/mm/init.c | 3 +-- arch/mn10300/mm/misalignment.c | 3 +-- arch/mn10300/unit-asb2303/include/unit/timex.h | 3 +-- arch/mn10300/unit-asb2305/include/unit/timex.h | 3 +-- 5 files changed, 5 insertions(+), 10 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index e2d5ed891f37..b5b970d2954a 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -159,8 +159,7 @@ asmlinkage void do_IRQ(void) int irq; sp = current_stack_pointer(); - if (sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN) - BUG(); + BUG_ON(sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN); /* make sure local_irq_enable() doesn't muck up the interrupt priority * setting in EPSW */ diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c index 6e6bc0e51521..f86c28315a8e 100644 --- a/arch/mn10300/mm/init.c +++ b/arch/mn10300/mm/init.c @@ -84,8 +84,7 @@ void __init mem_init(void) int codesize, reservedpages, datasize, initsize; int tmp; - if (!mem_map) - BUG(); + BUG_ON(!mem_map); #define START_PFN (contig_page_data.bdata->node_min_pfn) #define MAX_LOW_PFN (contig_page_data.bdata->node_low_pfn) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 6dffbf97ac26..eef989c1d0c1 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -449,8 +449,7 @@ found_opcode: regs->pc, opcode, pop->opcode, pop->params[0], pop->params[1]); tmp = format_tbl[pop->format].opsz; - if (tmp > noc) - BUG(); /* match was less complete than it ought to have been */ + BUG_ON(tmp > noc); /* match was less complete than it ought to have been */ if (tmp < noc) { tmp = noc - tmp; diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h index f206b63c95b4..88cd96bb2527 100644 --- a/arch/mn10300/unit-asb2303/include/unit/timex.h +++ b/arch/mn10300/unit-asb2303/include/unit/timex.h @@ -50,8 +50,7 @@ static inline void startup_jiffies_counter(void) md = TM0MD_SRC_IOCLK_32; rate = MN10300_JCCLK / 32 / HZ; - if (rate > TMJCBR_MAX) - BUG(); + BUG_ON(rate > TMJCBR_MAX); } } diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h index d1c72d59fa9f..0860186eedb2 100644 --- a/arch/mn10300/unit-asb2305/include/unit/timex.h +++ b/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -50,8 +50,7 @@ static inline void startup_jiffies_counter(void) md = TM0MD_SRC_IOCLK_32; rate = MN10300_JCCLK / 32 / HZ; - if (rate > TMJCBR_MAX) - BUG(); + BUG_ON(rate > TMJCBR_MAX); } } -- cgit v1.2.3 From e4acfcac0f3e3b575bb1819052b91b579988c59b Mon Sep 17 00:00:00 2001 From: Justin Chen Date: Wed, 27 Oct 2010 17:28:34 +0100 Subject: bitops: Change the bitmap index from int to unsigned long [mn10300] Change the index to unsigned long in all bitops for [mn10300] Signed-off-by: Justin Chen Reviewed-by: Bjorn Helgaas Signed-off-by: David Howells --- arch/mn10300/include/asm/bitops.h | 12 ++++++------ arch/mn10300/lib/bitops.c | 4 ++-- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h index 3f50e9661076..6208ea60458e 100644 --- a/arch/mn10300/include/asm/bitops.h +++ b/arch/mn10300/include/asm/bitops.h @@ -57,7 +57,7 @@ #define clear_bit(nr, addr) ___clear_bit((nr), (addr)) -static inline void __clear_bit(int nr, volatile void *addr) +static inline void __clear_bit(unsigned long nr, volatile void *addr) { unsigned int *a = (unsigned int *) addr; int mask; @@ -70,7 +70,7 @@ static inline void __clear_bit(int nr, volatile void *addr) /* * test bit */ -static inline int test_bit(int nr, const volatile void *addr) +static inline int test_bit(unsigned long nr, const volatile void *addr) { return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31)); } @@ -78,7 +78,7 @@ static inline int test_bit(int nr, const volatile void *addr) /* * change bit */ -static inline void __change_bit(int nr, volatile void *addr) +static inline void __change_bit(unsigned long nr, volatile void *addr) { int mask; unsigned int *a = (unsigned int *) addr; @@ -88,7 +88,7 @@ static inline void __change_bit(int nr, volatile void *addr) *a ^= mask; } -extern void change_bit(int nr, volatile void *addr); +extern void change_bit(unsigned long nr, volatile void *addr); /* * test and set bit @@ -135,7 +135,7 @@ extern void change_bit(int nr, volatile void *addr); /* * test and change bit */ -static inline int __test_and_change_bit(int nr, volatile void *addr) +static inline int __test_and_change_bit(unsigned long nr, volatile void *addr) { int mask, retval; unsigned int *a = (unsigned int *)addr; @@ -148,7 +148,7 @@ static inline int __test_and_change_bit(int nr, volatile void *addr) return retval; } -extern int test_and_change_bit(int nr, volatile void *addr); +extern int test_and_change_bit(unsigned long nr, volatile void *addr); #include diff --git a/arch/mn10300/lib/bitops.c b/arch/mn10300/lib/bitops.c index 440a7dcbf87b..a66c6cdaf442 100644 --- a/arch/mn10300/lib/bitops.c +++ b/arch/mn10300/lib/bitops.c @@ -15,7 +15,7 @@ /* * try flipping a bit using BSET and BCLR */ -void change_bit(int nr, volatile void *addr) +void change_bit(unsigned long nr, volatile void *addr) { if (test_bit(nr, addr)) goto try_clear_bit; @@ -34,7 +34,7 @@ try_clear_bit: /* * try flipping a bit using BSET and BCLR and returning the old value */ -int test_and_change_bit(int nr, volatile void *addr) +int test_and_change_bit(unsigned long nr, volatile void *addr) { if (test_bit(nr, addr)) goto try_clear_bit; -- cgit v1.2.3 From dcd42ed3ea829aa99cf00d34c61e082ce575b193 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Oct 2010 17:28:34 +0100 Subject: mn10300: Use pci_claim_resource Instead of open-coding pci_find_parent_resource and request_resource, just call pci_claim_resource. Signed-off-by: Matthew Wilcox Signed-off-by: David Howells --- arch/mn10300/unit-asb2305/pci-asb2305.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c index 45b40ac6c464..8e6763e6f250 100644 --- a/arch/mn10300/unit-asb2305/pci-asb2305.c +++ b/arch/mn10300/unit-asb2305/pci-asb2305.c @@ -93,7 +93,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) struct pci_bus *bus; struct pci_dev *dev; int idx; - struct resource *r, *pr; + struct resource *r; /* Depth-First Search on bus tree */ list_for_each_entry(bus, bus_list, node) { @@ -105,10 +105,8 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) r = &dev->resource[idx]; if (!r->flags) continue; - pr = pci_find_parent_resource(dev, r); if (!r->start || - !pr || - request_resource(pr, r) < 0) { + pci_claim_resource(dev, idx) < 0) { printk(KERN_ERR "PCI:" " Cannot allocate resource" " region %d of bridge %s\n", @@ -131,7 +129,7 @@ static void __init pcibios_allocate_resources(int pass) struct pci_dev *dev = NULL; int idx, disabled; u16 command; - struct resource *r, *pr; + struct resource *r; for_each_pci_dev(dev) { pci_read_config_word(dev, PCI_COMMAND, &command); @@ -150,8 +148,7 @@ static void __init pcibios_allocate_resources(int pass) " (f=%lx, d=%d, p=%d)\n", pci_name(dev), r->start, r->end, r->flags, disabled, pass); - pr = pci_find_parent_resource(dev, r); - if (!pr || request_resource(pr, r) < 0) { + if (pci_claim_resource(dev, idx) < 0) { printk(KERN_ERR "PCI:" " Cannot allocate resource" " region %d of device %s\n", @@ -184,7 +181,7 @@ static void __init pcibios_allocate_resources(int pass) static int __init pcibios_assign_resources(void) { struct pci_dev *dev = NULL; - struct resource *r, *pr; + struct resource *r; if (!(pci_probe & PCI_ASSIGN_ROMS)) { /* Try to use BIOS settings for ROMs, otherwise let @@ -194,8 +191,7 @@ static int __init pcibios_assign_resources(void) r = &dev->resource[PCI_ROM_RESOURCE]; if (!r->flags || !r->start) continue; - pr = pci_find_parent_resource(dev, r); - if (!pr || request_resource(pr, r) < 0) { + if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) { r->end -= r->start; r->start = 0; } -- cgit v1.2.3 From 3b950de9c94b4b9fde4f1340358ab52ce0f34be0 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Oct 2010 17:28:35 +0100 Subject: MN10300: Prevent cnt32_to_63() from being preempted in sched_clock() Prevent cnt32_to_63() from being preempted in sched_clock() because it may read its internal counter, get preempted, get delayed for more than the half period of the 'TSC' and then write the internal counter, thus corrupting it. Whilst some callers of sched_clock() have interrupts disabled or hold spinlocks, not all do, and so preemption must be held here. Note that sched_clock() is called from lockdep, but that shouldn't be a problem because although preempt_disable() calls into lockdep, lockdep has a recursion counter to deal with this. Signed-off-by: David Howells --- arch/mn10300/kernel/time.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/mn10300') diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c index 8f7f6d22783d..0b5c856b4266 100644 --- a/arch/mn10300/kernel/time.c +++ b/arch/mn10300/kernel/time.c @@ -54,6 +54,9 @@ unsigned long long sched_clock(void) unsigned long tsc, tmp; unsigned product[3]; /* 96-bit intermediate value */ + /* cnt32_to_63() is not safe with preemption */ + preempt_disable(); + /* read the TSC value */ tsc = 0 - get_cycles(); /* get_cycles() counts down */ @@ -64,6 +67,8 @@ unsigned long long sched_clock(void) */ tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL; + preempt_enable(); + /* scale the 64-bit TSC value to a nanosecond value via a 96-bit * intermediate */ -- cgit v1.2.3 From 3195d0b564c4aa3f8ff13b536e3c09a9ffed8f12 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:36 +0100 Subject: MN10300: Don't cast away the volatile in test_bit() Don't cast away the volatile in test_bit()'s parameter when we change its type from const volatile void * so that we can dereference it. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/include/asm/bitops.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h index 6208ea60458e..3b8a868188f5 100644 --- a/arch/mn10300/include/asm/bitops.h +++ b/arch/mn10300/include/asm/bitops.h @@ -72,7 +72,7 @@ static inline void __clear_bit(unsigned long nr, volatile void *addr) */ static inline int test_bit(unsigned long nr, const volatile void *addr) { - return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31)); + return 1UL & (((const volatile unsigned int *) addr)[nr >> 5] >> (nr & 31)); } /* -- cgit v1.2.3 From 9f59f7d23c912f10ff8767b354a4c5f672a99d76 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:37 +0100 Subject: MN10300: Add reads[bwl]() and writes[bwl]() Add reads[bwl]() and writes[bwl]() for MN10300. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/include/asm/io.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/io.h b/arch/mn10300/include/asm/io.h index c1a4119e6497..787255da744e 100644 --- a/arch/mn10300/include/asm/io.h +++ b/arch/mn10300/include/asm/io.h @@ -206,6 +206,19 @@ static inline void outsl(unsigned long addr, const void *buffer, int count) #define iowrite32_rep(p, src, count) \ outsl((unsigned long) (p), (src), (count)) +#define readsb(p, dst, count) \ + insb((unsigned long) (p), (dst), (count)) +#define readsw(p, dst, count) \ + insw((unsigned long) (p), (dst), (count)) +#define readsl(p, dst, count) \ + insl((unsigned long) (p), (dst), (count)) + +#define writesb(p, src, count) \ + outsb((unsigned long) (p), (src), (count)) +#define writesw(p, src, count) \ + outsw((unsigned long) (p), (src), (count)) +#define writesl(p, src, count) \ + outsl((unsigned long) (p), (src), (count)) #define IO_SPACE_LIMIT 0xffffffff -- cgit v1.2.3 From 9f200d3fed9ca34e94ee03df049f7dcd71538acf Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:37 +0100 Subject: MN10300: Provide the functions to fully disable maskable interrupts The local_irq_disable() function and co. merely raise the interrupt mask on the MN10300 arch to exclude normal interrupts. This still lets other, higher priority maskable interrupts through, such as are used to service gdbstub's serial port and the MN10300 on-chip serial port virtual FIFOs. Provide functions to allow the maskable interrupts to be fully disabled, which will exclude those interrupts. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/include/asm/irqflags.h | 77 +++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h index 5e529a117cb2..f1b64b256060 100644 --- a/arch/mn10300/include/asm/irqflags.h +++ b/arch/mn10300/include/asm/irqflags.h @@ -119,5 +119,82 @@ static inline void arch_safe_halt(void) : "cc"); } +static inline void arch_local_cli(void) +{ + asm volatile( + " and %0,epsw \n" + " nop \n" + " nop \n" + " nop \n" + : + : "i"(~EPSW_IE) + : "memory" + ); +} + +static inline unsigned long arch_local_cli_save(void) +{ + unsigned long flags = arch_local_save_flags(); + arch_local_cli(); + return flags; +} + +static inline void arch_local_sti(void) +{ + asm volatile( + " or %0,epsw \n" + : + : "i"(EPSW_IE) + : "memory"); +} + +static inline void arch_local_change_intr_mask_level(unsigned long level) +{ + asm volatile( + " and %0,epsw \n" + " or %1,epsw \n" + : + : "i"(~EPSW_IM), "i"(EPSW_IE | level) + : "cc", "memory"); +} + +#else /* !__ASSEMBLY__ */ + +#define LOCAL_SAVE_FLAGS(reg) \ + mov epsw,reg + +#define LOCAL_IRQ_DISABLE \ + and ~EPSW_IM,epsw; \ + or EPSW_IE|MN10300_CLI_LEVEL,epsw; \ + nop; \ + nop; \ + nop + +#define LOCAL_IRQ_ENABLE \ + or EPSW_IE|EPSW_IM_7,epsw + +#define LOCAL_IRQ_RESTORE(reg) \ + mov reg,epsw + +#define LOCAL_CLI_SAVE(reg) \ + mov epsw,reg; \ + and ~EPSW_IE,epsw; \ + nop; \ + nop; \ + nop + +#define LOCAL_CLI \ + and ~EPSW_IE,epsw; \ + nop; \ + nop; \ + nop + +#define LOCAL_STI \ + or EPSW_IE,epsw + +#define LOCAL_CHANGE_INTR_MASK_LEVEL(level) \ + and ~EPSW_IM,epsw; \ + or EPSW_IE|(level),epsw + #endif /* __ASSEMBLY__ */ #endif /* _ASM_IRQFLAGS_H */ -- cgit v1.2.3 From 22d4225f6176c44d3fd3565df748651de24497e0 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:38 +0100 Subject: MN10300: Differentiate AM33_2 and AM33_3 in config Differentiate AM33_2 and AM33_3 CPU cores in configuration. The MN103E010 processor contains an AM33_2 core. Whilst we're at it, prepare for AM34-based stuff by declaring AM34_2 too. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/Kconfig | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 7c2a2f7f8dc1..275963eeae13 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -9,8 +9,14 @@ config MN10300 def_bool y select HAVE_OPROFILE -config AM33 - def_bool y +config AM33_2 + def_bool n + +config AM33_3 + def_bool n + +config AM34_2 + def_bool n config MMU def_bool y @@ -99,6 +105,7 @@ choice config MN10300_PROC_MN103E010 bool "MN103E010" depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305 + select AM33_2 select MN10300_PROC_HAS_TTYSM0 select MN10300_PROC_HAS_TTYSM1 select MN10300_PROC_HAS_TTYSM2 -- cgit v1.2.3 From a116956423e1cdc4398110bdc66d66ae4c5ba90f Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:39 +0100 Subject: MN10300: Move DMA engine control reg defs to MN103E010 processor directory Move the DMA engine control register definitions to the MN103E010 processor directory so that the MN2WS0050 processor can have its own. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/include/asm/dmactl-regs.h | 87 +----------------- .../proc-mn103e010/include/proc/dmactl-regs.h | 102 +++++++++++++++++++++ 2 files changed, 103 insertions(+), 86 deletions(-) create mode 100644 arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/dmactl-regs.h b/arch/mn10300/include/asm/dmactl-regs.h index 58a199da0f4a..80337b339c90 100644 --- a/arch/mn10300/include/asm/dmactl-regs.h +++ b/arch/mn10300/include/asm/dmactl-regs.h @@ -11,91 +11,6 @@ #ifndef _ASM_DMACTL_REGS_H #define _ASM_DMACTL_REGS_H -#include - -#ifdef __KERNEL__ - -/* DMA registers */ -#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */ -#define DMxCTR_BG 0x0000001f /* transfer request source */ -#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ -#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ -#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ -#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ -#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ -#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ -#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ -#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ -#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ -#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ -#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ -#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ -#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */ -#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */ -#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */ -#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */ -#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */ -#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */ -#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */ -#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */ -#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */ -#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ -#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ -#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */ -#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ -#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ -#define DMxCTR_TM 0x00001800 /* DMA transfer mode */ -#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */ -#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */ -#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ -#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ -#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ -#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ -#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ -#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ -#define DMxCTR_RQM 0x00060000 /* external request input source mode */ -#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ -#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ -#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ -#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ -#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ -#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ - -#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */ - -#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */ - -#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */ -#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ - -#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent - * size reg */ -#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ - -#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ -#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ -#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ -#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ - -#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ -#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ -#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ -#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ - -#ifndef __ASSEMBLY__ - -struct mn10300_dmactl_regs { - u32 ctr; - const void *src; - void *dst; - u32 siz; - u32 cyc; -} __attribute__((aligned(0x100))); - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ +#include #endif /* _ASM_DMACTL_REGS_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h b/arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h new file mode 100644 index 000000000000..d72d328d1f9c --- /dev/null +++ b/arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h @@ -0,0 +1,102 @@ +/* MN103E010 on-board DMA controller registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_DMACTL_REGS_H +#define _ASM_PROC_DMACTL_REGS_H + +#include + +#ifdef __KERNEL__ + +/* DMA registers */ +#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */ +#define DMxCTR_BG 0x0000001f /* transfer request source */ +#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ +#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ +#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ +#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ +#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ +#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ +#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ +#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ +#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ +#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ +#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ +#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ +#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */ +#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */ +#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */ +#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */ +#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */ +#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */ +#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */ +#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */ +#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */ +#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ +#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ +#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */ +#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ +#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ +#define DMxCTR_TM 0x00001800 /* DMA transfer mode */ +#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */ +#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */ +#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ +#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ +#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ +#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ +#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ +#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ +#define DMxCTR_RQM 0x00060000 /* external request input source mode */ +#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ +#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ +#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ +#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ +#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ +#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ + +#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */ + +#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */ + +#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */ +#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ + +#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent + * size reg */ +#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ + +#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ +#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ +#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ +#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ + +#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ +#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ +#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ +#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ + +#ifndef __ASSEMBLY__ + +struct mn10300_dmactl_regs { + u32 ctr; + const void *src; + void *dst; + u32 siz; + u32 cyc; +} __attribute__((aligned(0x100))); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PROC_DMACTL_REGS_H */ -- cgit v1.2.3 From 06019be31a1b5812eec5bb3e1dbdeced04950e8e Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:39 +0100 Subject: MN10300: Don't hard code the cacheline size in register defs Don't hard code the cacheline size in the cache control register definitions. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/include/asm/cache.h | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/cache.h b/arch/mn10300/include/asm/cache.h index 781bf613366d..f29cde2cfc91 100644 --- a/arch/mn10300/include/asm/cache.h +++ b/arch/mn10300/include/asm/cache.h @@ -43,14 +43,18 @@ /* instruction cache access registers */ #define ICACHE_DATA(WAY, ENTRY, OFF) \ - __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) + __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES + (OFF) * 4, u32) #define ICACHE_TAG(WAY, ENTRY) \ - __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) + __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES, u32) -/* instruction cache access registers */ +/* data cache access registers */ #define DCACHE_DATA(WAY, ENTRY, OFF) \ - __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) + __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES + (OFF) * 4, u32) #define DCACHE_TAG(WAY, ENTRY) \ - __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) + __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES, u32) #endif /* _ASM_CACHE_H */ -- cgit v1.2.3 From 8fbbf7c76a0c89cede075ab7e231970a42e55456 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:40 +0100 Subject: MN10300: Add CPU register bits for AM34 Add CPU register declarations for the AM34 subarch. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/Kconfig | 7 ++++ arch/mn10300/include/asm/cpu-regs.h | 72 ++++++++++++++++++++++++++++++++++--- 2 files changed, 74 insertions(+), 5 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 275963eeae13..eab0c2aa95cd 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -17,6 +17,7 @@ config AM33_3 config AM34_2 def_bool n + select MN10300_HAS_ATOMIC_OPS_UNIT config MMU def_bool y @@ -124,6 +125,12 @@ config MN10300_CPU_AM33V2 endchoice +config MN10300_HAS_ATOMIC_OPS_UNIT + def_bool n + help + This should be enabled if the processor has an atomic ops unit + capable of doing LL/SC equivalent operations. + config FPU bool "FPU present" default y diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h index 757e9b5388ea..00e306ce52ce 100644 --- a/arch/mn10300/include/asm/cpu-regs.h +++ b/arch/mn10300/include/asm/cpu-regs.h @@ -15,7 +15,6 @@ #include #endif -#ifdef CONFIG_MN10300_CPU_AM33V2 /* we tell the compiler to pretend to be AM33 so that it doesn't try and use * the FP regs, but tell the assembler that we're actually allowed AM33v2 * instructions */ @@ -24,7 +23,6 @@ asm(" .am33_2\n"); #else .am33_2 #endif -#endif #ifdef __KERNEL__ @@ -58,6 +56,9 @@ asm(" .am33_2\n"); #define EPSW_nAR 0x00040000 /* register bank control */ #define EPSW_ML 0x00080000 /* monitor level */ #define EPSW_FE 0x00100000 /* FPU enable */ +#define EPSW_IM_SHIFT 8 /* EPSW_IM_SHIFT determines the interrupt mode */ + +#define NUM2EPSW_IM(num) ((num) << EPSW_IM_SHIFT) /* FPU registers */ #define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */ @@ -99,9 +100,11 @@ asm(" .am33_2\n"); #define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */ #define CPUREV_TYPE 0x0000000f /* CPU type */ #define CPUREV_TYPE_S 0 -#define CPUREV_TYPE_AM33V1 0x00000000 /* - AM33 V1 core, AM33/1.00 arch */ -#define CPUREV_TYPE_AM33V2 0x00000001 /* - AM33 V2 core, AM33/2.00 arch */ -#define CPUREV_TYPE_AM34V1 0x00000002 /* - AM34 V1 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM33_1 0x00000000 /* - AM33-1 core, AM33/1.00 arch */ +#define CPUREV_TYPE_AM33_2 0x00000001 /* - AM33-2 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM34_1 0x00000002 /* - AM34-1 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM33_3 0x00000003 /* - AM33-3 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM34_2 0x00000004 /* - AM34-2 core, AM33/3.00 arch */ #define CPUREV_REVISION 0x000000f0 /* CPU revision */ #define CPUREV_REVISION_S 4 #define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */ @@ -180,6 +183,21 @@ asm(" .am33_2\n"); #define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */ #define CHCTR_DCWMD 0xf000 /* data cache way mode */ +#ifdef CONFIG_AM34_2 +#define ICIVCR __SYSREG(0xc0000c00, u32) /* icache area invalidate control */ +#define ICIVCR_ICIVBSY 0x00000008 /* icache area invalidate busy */ +#define ICIVCR_ICI 0x00000001 /* icache area invalidate */ + +#define ICIVMR __SYSREG(0xc0000c04, u32) /* icache area invalidate mask */ + +#define DCPGCR __SYSREG(0xc0000c10, u32) /* data cache area purge control */ +#define DCPGCR_DCPGBSY 0x00000008 /* data cache area purge busy */ +#define DCPGCR_DCP 0x00000002 /* data cache area purge */ +#define DCPGCR_DCI 0x00000001 /* data cache area invalidate */ + +#define DCPGMR __SYSREG(0xc0000c14, u32) /* data cache area purge mask */ +#endif /* CONFIG_AM34_2 */ + /* MMU control registers */ #define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */ #define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */ @@ -203,6 +221,9 @@ asm(" .am33_2\n"); #define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */ #define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */ #define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */ +#ifdef CONFIG_AM34_2 +#define MMUCTR_WTE 0x80000000 /* write-through cache TLB entry bit enable */ +#endif #define PIDR __SYSREG(0xc0000094, u16) /* PID register */ #define PIDR_PID 0x00ff /* process identifier */ @@ -285,6 +306,47 @@ asm(" .am33_2\n"); #define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */ #define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */ +#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT +/* atomic operation registers */ +#define AAR __SYSREG(0xc0000a00, u32) /* cacheable address */ +#define AAR2 __SYSREG(0xc0000a04, u32) /* uncacheable address */ +#define ADR __SYSREG(0xc0000a08, u32) /* data */ +#define ASR __SYSREG(0xc0000a0c, u32) /* status */ +#define AARU __SYSREG(0xd400aa00, u32) /* user address */ +#define ADRU __SYSREG(0xd400aa08, u32) /* user data */ +#define ASRU __SYSREG(0xd400aa0c, u32) /* user status */ + +#define ASR_RW 0x00000008 /* read */ +#define ASR_BW 0x00000004 /* bus error */ +#define ASR_IW 0x00000002 /* interrupt */ +#define ASR_LW 0x00000001 /* bus lock */ + +#define ASRU_RW ASR_RW /* read */ +#define ASRU_BW ASR_BW /* bus error */ +#define ASRU_IW ASR_IW /* interrupt */ +#define ASRU_LW ASR_LW /* bus lock */ + +/* in inline ASM, we stick the base pointer in to a reg and use offsets from + * it */ +#define ATOMIC_OPS_BASE_ADDR 0xc0000a00 +#ifndef __ASSEMBLY__ +asm( + "_AAR = 0\n" + "_AAR2 = 4\n" + "_ADR = 8\n" + "_ASR = 12\n"); +#else +#define _AAR 0 +#define _AAR2 4 +#define _ADR 8 +#define _ASR 12 +#endif + +/* physical page address for userspace atomic operations registers */ +#define USER_ATOMIC_OPS_PAGE_ADDR 0xd400a000 + +#endif /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */ + #endif /* __KERNEL__ */ #endif /* _ASM_CPU_REGS_H */ -- cgit v1.2.3 From 86c0f935c1eee1d778b43895f80c9d27a896dfd9 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:41 +0100 Subject: MN10300: Remove monitor/JTAG functions Remove the monitor trap function and the set_jtag_stub function as they're not really necessary. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/include/asm/exceptions.h | 5 ++--- arch/mn10300/kernel/entry.S | 25 ------------------------- arch/mn10300/kernel/traps.c | 22 ---------------------- arch/mn10300/mm/fault.c | 5 ----- 4 files changed, 2 insertions(+), 55 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h index fa16466ef3f9..3f3826abc745 100644 --- a/arch/mn10300/include/asm/exceptions.h +++ b/arch/mn10300/include/asm/exceptions.h @@ -15,8 +15,8 @@ /* * define the breakpoint instruction opcode to use - * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can - * (can use 0xF7) + * - note that the JTAG unit steals 0xFF, so you can't use JTAG and GDBSTUB at + * the same time. */ #define GDBSTUB_BKPT 0xFF @@ -90,7 +90,6 @@ enum exception_code { extern void __set_intr_stub(enum exception_code code, void *handler); extern void set_intr_stub(enum exception_code code, void *handler); -extern void set_jtag_stub(enum exception_code code, void *handler); struct pt_regs; diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 3d394b4eefba..b82ce7b47fcb 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -214,31 +214,6 @@ ENTRY(irq_handler) jmp ret_from_intr -############################################################################### -# -# Monitor Signal handler entry point -# -############################################################################### -ENTRY(monitor_signal) - movbu (0xae000001),d1 - cmp 1,d1 - beq monsignal - ret [],0 - -monsignal: - or EPSW_NMID,epsw - mov d0,a0 - mov a0,sp - mov (REG_EPSW,fp),d1 - and ~EPSW_nSL,d1 - mov d1,(REG_EPSW,fp) - movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother] - mov (sp),a1 - mov a1,usp - movm (sp),[other] - add 4,sp -here: jmp 0x8e000008-here+0x8e000008 - ############################################################################### # # Double Fault handler entry point diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index 91365adba4f5..a64604b512d5 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -537,28 +537,6 @@ void __init set_intr_stub(enum exception_code code, void *handler) mn10300_icache_inv(); } -/* - * set an interrupt stub to invoke the JTAG unit and then jump to a handler - */ -void __init set_jtag_stub(enum exception_code code, void *handler) -{ - unsigned long addr; - u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code); - - addr = (unsigned long) handler - ((unsigned long) vector + 1); - vector[0] = 0xff; /* PI to jump into JTAG debugger */ - vector[1] = 0xdc; /* jmp handler */ - vector[2] = addr; - vector[3] = addr >> 8; - vector[4] = addr >> 16; - vector[5] = addr >> 24; - vector[6] = 0xcb; - vector[7] = 0xcb; - - mn10300_dcache_flush_inv(); - flush_icache_range((unsigned long) vector, (unsigned long) vector + 8); -} - /* * initialise the exception table */ diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c index 81f153fa51b4..906e4c8f9ab1 100644 --- a/arch/mn10300/mm/fault.c +++ b/arch/mn10300/mm/fault.c @@ -100,8 +100,6 @@ static void print_pagetable_entries(pgd_t *pgdir, unsigned long address) } #endif -asmlinkage void monitor_signal(struct pt_regs *); - /* * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate @@ -279,7 +277,6 @@ good_area: */ bad_area: up_read(&mm->mmap_sem); - monitor_signal(regs); /* User mode accesses just cause a SIGSEGV */ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) { @@ -292,7 +289,6 @@ bad_area: } no_context: - monitor_signal(regs); /* Are we prepared to handle this kernel fault? */ if (fixup_exception(regs)) return; @@ -345,7 +341,6 @@ out_of_memory: do_sigbus: up_read(&mm->mmap_sem); - monitor_signal(regs); /* * Send a sigbus, regardless of whether we were in kernel -- cgit v1.2.3 From 0bc42d7fcb0acaab4202db97ff2de475424bf9b4 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Oct 2010 17:28:41 +0100 Subject: MN10300: Cache: Split cache bits out of arch Kconfig Split the cache bits out of arch/mn10300/Kconfig as they're quite complex. Signed-off-by: David Howells --- arch/mn10300/Kconfig | 29 +---------------------------- arch/mn10300/mm/Kconfig.cache | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 33 insertions(+), 28 deletions(-) create mode 100644 arch/mn10300/mm/Kconfig.cache (limited to 'arch/mn10300') diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index eab0c2aa95cd..069e34d4c4ac 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -136,34 +136,7 @@ config FPU default y depends on MN10300_PROC_MN103E010 -choice - prompt "CPU Caching mode" - default MN10300_CACHE_WBACK - help - This option determines the caching mode for the kernel. - - Write-Back caching mode involves the all reads and writes causing - the affected cacheline to be read into the cache first before being - operated upon. Memory is not then updated by a write until the cache - is filled and a cacheline needs to be displaced from the cache to - make room. Only at that point is it written back. - - Write-Through caching only fetches cachelines from memory on a - read. Writes always get written directly to memory. If the affected - cacheline is also in cache, it will be updated too. - - The final option is to turn of caching entirely. - -config MN10300_CACHE_WBACK - bool "Write-Back" - -config MN10300_CACHE_WTHRU - bool "Write-Through" - -config MN10300_CACHE_DISABLED - bool "Disabled" - -endchoice +source "arch/mn10300/mm/Kconfig.cache" menu "Memory layout options" diff --git a/arch/mn10300/mm/Kconfig.cache b/arch/mn10300/mm/Kconfig.cache new file mode 100644 index 000000000000..f5599f47ec15 --- /dev/null +++ b/arch/mn10300/mm/Kconfig.cache @@ -0,0 +1,32 @@ +# +# MN10300 CPU cache options +# + +choice + prompt "CPU Caching mode" + default MN10300_CACHE_WBACK + help + This option determines the caching mode for the kernel. + + Write-Back caching mode involves the all reads and writes causing + the affected cacheline to be read into the cache first before being + operated upon. Memory is not then updated by a write until the cache + is filled and a cacheline needs to be displaced from the cache to + make room. Only at that point is it written back. + + Write-Through caching only fetches cachelines from memory on a + read. Writes always get written directly to memory. If the affected + cacheline is also in cache, it will be updated too. + + The final option is to turn of caching entirely. + +config MN10300_CACHE_WBACK + bool "Write-Back" + +config MN10300_CACHE_WTHRU + bool "Write-Through" + +config MN10300_CACHE_DISABLED + bool "Disabled" + +endchoice -- cgit v1.2.3 From 344af921e6f23ea82487d76918d2643fcc88c311 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Oct 2010 17:28:42 +0100 Subject: MN10300: Provide a MN10300_CACHE_ENABLED config option Provide a MN10300_CACHE_ENABLED config option as inverted logic of MN10300_CACHE_DISABLED to make things simpler. Signed-off-by: David Howells --- arch/mn10300/include/asm/cacheflush.h | 6 +++--- arch/mn10300/include/asm/gdb-stub.h | 2 +- arch/mn10300/include/asm/processor.h | 4 ++-- arch/mn10300/kernel/Makefile | 2 +- arch/mn10300/kernel/head.S | 6 +++--- arch/mn10300/mm/Kconfig.cache | 3 +++ 6 files changed, 13 insertions(+), 10 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h index 29e692f7f030..b85be1d2fd32 100644 --- a/arch/mn10300/include/asm/cacheflush.h +++ b/arch/mn10300/include/asm/cacheflush.h @@ -34,7 +34,7 @@ /* * physically-indexed cache management */ -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED extern void flush_icache_range(unsigned long start, unsigned long end); extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg); @@ -61,7 +61,7 @@ extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg); /* * primitive routines */ -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED extern void mn10300_icache_inv(void); extern void mn10300_dcache_inv(void); extern void mn10300_dcache_inv_page(unsigned start); @@ -103,7 +103,7 @@ extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size); #define mn10300_dcache_flush_page(start) do {} while (0) #define mn10300_dcache_flush_range(start, end) do {} while (0) #define mn10300_dcache_flush_range2(start, size) do {} while (0) -#endif /* CONFIG_MN10300_CACHE_DISABLED */ +#endif /* CONFIG_MN10300_CACHE_ENABLED */ /* * internal debugging function diff --git a/arch/mn10300/include/asm/gdb-stub.h b/arch/mn10300/include/asm/gdb-stub.h index 41ed26763964..f5495ad82b77 100644 --- a/arch/mn10300/include/asm/gdb-stub.h +++ b/arch/mn10300/include/asm/gdb-stub.h @@ -110,7 +110,7 @@ extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code); extern asmlinkage void __gdbstub_bug_trap(void); extern asmlinkage void __gdbstub_pause(void); -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED extern asmlinkage void gdbstub_purge_cache(void); #else #define gdbstub_purge_cache() do {} while (0) diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h index f7d4b0d285e8..fd96c180e649 100644 --- a/arch/mn10300/include/asm/processor.h +++ b/arch/mn10300/include/asm/processor.h @@ -157,7 +157,7 @@ unsigned long get_wchan(struct task_struct *p); static inline void prefetch(const void *x) { -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED #ifdef CONFIG_MN10300_PROC_MN103E010 asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); #else @@ -168,7 +168,7 @@ static inline void prefetch(const void *x) static inline void prefetchw(const void *x) { -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED #ifdef CONFIG_MN10300_PROC_MN103E010 asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); #else diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile index 23f2ab67574c..c4289e388071 100644 --- a/arch/mn10300/kernel/Makefile +++ b/arch/mn10300/kernel/Makefile @@ -17,7 +17,7 @@ obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-low.o obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o -ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y) +ifeq ($(CONFIG_MN10300_CACHE_ENABLED),y) obj-$(CONFIG_GDBSTUB) += gdb-cache.o endif diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S index 14f27f3bfaf4..a81e34fba651 100644 --- a/arch/mn10300/kernel/head.S +++ b/arch/mn10300/kernel/head.S @@ -61,18 +61,18 @@ _start: btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy lne -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED #ifdef CONFIG_MN10300_CACHE_WBACK #ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 #else mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0 -#endif /* CACHE_DISABLED */ +#endif /* NOWRALLOC */ #else mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 #endif /* WBACK */ movhu d0,(a0) # enable -#endif /* NOWRALLOC */ +#endif /* ENABLED */ # turn on RTS on the debug serial port if applicable #ifdef CONFIG_MN10300_UNIT_ASB2305 diff --git a/arch/mn10300/mm/Kconfig.cache b/arch/mn10300/mm/Kconfig.cache index f5599f47ec15..56a88dd9c70c 100644 --- a/arch/mn10300/mm/Kconfig.cache +++ b/arch/mn10300/mm/Kconfig.cache @@ -30,3 +30,6 @@ config MN10300_CACHE_DISABLED bool "Disabled" endchoice + +config MN10300_CACHE_ENABLED + def_bool y if !MN10300_CACHE_DISABLED -- cgit v1.2.3 From 93c10d3d68c469c1addacbc541da5518f1de021d Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Oct 2010 17:28:43 +0100 Subject: MN10300: Reorder asm/cacheflush.h to put primitives first Reorder asm/cacheflush.h to put arch primitives first, before the main functions so that the main functions can be inline asm rather than #defines when non-trivial. Signed-off-by: David Howells --- arch/mn10300/include/asm/cacheflush.h | 88 +++++++++++++++++------------------ 1 file changed, 44 insertions(+), 44 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h index b85be1d2fd32..0b5d00438374 100644 --- a/arch/mn10300/include/asm/cacheflush.h +++ b/arch/mn10300/include/asm/cacheflush.h @@ -17,49 +17,7 @@ #include /* - * virtually-indexed cache management (our cache is physically indexed) - */ -#define flush_cache_all() do {} while (0) -#define flush_cache_mm(mm) do {} while (0) -#define flush_cache_dup_mm(mm) do {} while (0) -#define flush_cache_range(mm, start, end) do {} while (0) -#define flush_cache_page(vma, vmaddr, pfn) do {} while (0) -#define flush_cache_vmap(start, end) do {} while (0) -#define flush_cache_vunmap(start, end) do {} while (0) -#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -#define flush_dcache_page(page) do {} while (0) -#define flush_dcache_mmap_lock(mapping) do {} while (0) -#define flush_dcache_mmap_unlock(mapping) do {} while (0) - -/* - * physically-indexed cache management - */ -#ifdef CONFIG_MN10300_CACHE_ENABLED - -extern void flush_icache_range(unsigned long start, unsigned long end); -extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg); - -#else - -#define flush_icache_range(start, end) do {} while (0) -#define flush_icache_page(vma, pg) do {} while (0) - -#endif - -#define flush_icache_user_range(vma, pg, adr, len) \ - flush_icache_range(adr, adr + len) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - flush_icache_page(vma, page); \ - } while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -/* - * primitive routines + * Primitive routines */ #ifdef CONFIG_MN10300_CACHE_ENABLED extern void mn10300_icache_inv(void); @@ -106,7 +64,49 @@ extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size); #endif /* CONFIG_MN10300_CACHE_ENABLED */ /* - * internal debugging function + * Virtually-indexed cache management (our cache is physically indexed) + */ +#define flush_cache_all() do {} while (0) +#define flush_cache_mm(mm) do {} while (0) +#define flush_cache_dup_mm(mm) do {} while (0) +#define flush_cache_range(mm, start, end) do {} while (0) +#define flush_cache_page(vma, vmaddr, pfn) do {} while (0) +#define flush_cache_vmap(start, end) do {} while (0) +#define flush_cache_vunmap(start, end) do {} while (0) +#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 +#define flush_dcache_page(page) do {} while (0) +#define flush_dcache_mmap_lock(mapping) do {} while (0) +#define flush_dcache_mmap_unlock(mapping) do {} while (0) + +/* + * Physically-indexed cache management + */ +#ifdef CONFIG_MN10300_CACHE_ENABLED + +extern void flush_icache_range(unsigned long start, unsigned long end); +extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg); + +#else + +#define flush_icache_range(start, end) do {} while (0) +#define flush_icache_page(vma, pg) do {} while (0) + +#endif + +#define flush_icache_user_range(vma, pg, adr, len) \ + flush_icache_range(adr, adr + len) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + flush_icache_page(vma, page); \ + } while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +/* + * Internal debugging function */ #ifdef CONFIG_DEBUG_PAGEALLOC extern void kernel_map_pages(struct page *page, int numpages, int enable); -- cgit v1.2.3 From 518d4bb7464dd3c04aeb23874dc360b54058c01e Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Oct 2010 17:28:43 +0100 Subject: MN10300: AM34: The current cacheflush routines operate by controlling tag regs The current cache flush and invalidate routines operate by controlling the cache tag registers. Rename the files and add config items to select them. This makes it easier to support the use of other cache flush methods instead, such as the use of AM34's area purge registers, if available. Signed-off-by: David Howells --- arch/mn10300/mm/Kconfig.cache | 20 +++ arch/mn10300/mm/Makefile | 5 +- arch/mn10300/mm/cache-flush-by-tag.S | 192 ++++++++++++++++++++++ arch/mn10300/mm/cache-flush-mn10300.S | 192 ---------------------- arch/mn10300/mm/cache-inv-by-tag.S | 289 ++++++++++++++++++++++++++++++++++ arch/mn10300/mm/cache-mn10300.S | 289 ---------------------------------- 6 files changed, 504 insertions(+), 483 deletions(-) create mode 100644 arch/mn10300/mm/cache-flush-by-tag.S delete mode 100644 arch/mn10300/mm/cache-flush-mn10300.S create mode 100644 arch/mn10300/mm/cache-inv-by-tag.S delete mode 100644 arch/mn10300/mm/cache-mn10300.S (limited to 'arch/mn10300') diff --git a/arch/mn10300/mm/Kconfig.cache b/arch/mn10300/mm/Kconfig.cache index 56a88dd9c70c..aa6ff0791138 100644 --- a/arch/mn10300/mm/Kconfig.cache +++ b/arch/mn10300/mm/Kconfig.cache @@ -33,3 +33,23 @@ endchoice config MN10300_CACHE_ENABLED def_bool y if !MN10300_CACHE_DISABLED + + +choice + prompt "CPU cache flush/invalidate method" + default MN10300_CACHE_MANAGE_BY_TAG + depends on MN10300_CACHE_ENABLED + help + This determines the method by which CPU cache flushing and + invalidation is performed. + +config MN10300_CACHE_MANAGE_BY_TAG + bool "Use the cache tag registers directly" + +endchoice + +config MN10300_CACHE_INV_BY_TAG + def_bool y if MN10300_CACHE_MANAGE_BY_TAG && MN10300_CACHE_ENABLED + +config MN10300_CACHE_FLUSH_BY_TAG + def_bool y if MN10300_CACHE_MANAGE_BY_TAG && MN10300_CACHE_WBACK diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile index 1557277fbc5c..dc4b9f0ea65c 100644 --- a/arch/mn10300/mm/Makefile +++ b/arch/mn10300/mm/Makefile @@ -2,8 +2,9 @@ # Makefile for the MN10300-specific memory management code # -cacheflush-y := cache.o cache-mn10300.o -cacheflush-$(CONFIG_MN10300_CACHE_WBACK) += cache-flush-mn10300.o +cacheflush-y := cache.o +cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_TAG) += cache-inv-by-tag.o +cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_TAG) += cache-flush-by-tag.o cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o diff --git a/arch/mn10300/mm/cache-flush-by-tag.S b/arch/mn10300/mm/cache-flush-by-tag.S new file mode 100644 index 000000000000..c8ed1cbac107 --- /dev/null +++ b/arch/mn10300/mm/cache-flush-by-tag.S @@ -0,0 +1,192 @@ +/* MN10300 CPU core caching routines + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include + + .am33_2 + .globl mn10300_dcache_flush + .globl mn10300_dcache_flush_page + .globl mn10300_dcache_flush_range + .globl mn10300_dcache_flush_range2 + .globl mn10300_dcache_flush_inv + .globl mn10300_dcache_flush_inv_page + .globl mn10300_dcache_flush_inv_range + .globl mn10300_dcache_flush_inv_range2 + +############################################################################### +# +# void mn10300_dcache_flush(void) +# Flush the entire data cache back to RAM +# +############################################################################### + ALIGN +mn10300_dcache_flush: + movhu (CHCTR),d0 + btst CHCTR_DCEN,d0 + beq mn10300_dcache_flush_end + + # read the addresses tagged in the cache's tag RAM and attempt to flush + # those addresses specifically + # - we rely on the hardware to filter out invalid tag entry addresses + mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address + mov DCACHE_PURGE(0,0),a1 # dcache purge request address + mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries + +mn10300_dcache_flush_loop: + mov (a0),d0 + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 + or L1_CACHE_TAG_VALID,d0 # retain valid entries in the + # cache + mov d0,(a1) # conditional purge + +mn10300_dcache_flush_skip: + add L1_CACHE_BYTES,a0 + add L1_CACHE_BYTES,a1 + add -1,d1 + bne mn10300_dcache_flush_loop + +mn10300_dcache_flush_end: + ret [],0 + +############################################################################### +# +# void mn10300_dcache_flush_page(unsigned start) +# void mn10300_dcache_flush_range(unsigned start, unsigned end) +# void mn10300_dcache_flush_range2(unsigned start, unsigned size) +# Flush a range of addresses on a page in the dcache +# +############################################################################### + ALIGN +mn10300_dcache_flush_page: + mov PAGE_SIZE,d1 +mn10300_dcache_flush_range2: + add d0,d1 +mn10300_dcache_flush_range: + movm [d2,d3],(sp) + + movhu (CHCTR),d2 + btst CHCTR_DCEN,d2 + beq mn10300_dcache_flush_range_end + + # round start addr down + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 + mov d0,a1 + + add L1_CACHE_BYTES,d1 # round end addr up + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 + + # write a request to flush all instances of an address from the cache + mov DCACHE_PURGE(0,0),a0 + mov a1,d0 + and L1_CACHE_TAG_ENTRY,d0 + add d0,a0 # starting dcache purge control + # reg address + + sub a1,d1 + lsr L1_CACHE_SHIFT,d1 # total number of entries to + # examine + + or L1_CACHE_TAG_VALID,a1 # retain valid entries in the + # cache + +mn10300_dcache_flush_range_loop: + mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line + # all ways + + add L1_CACHE_BYTES,a0 + add L1_CACHE_BYTES,a1 + and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0 + add -1,d1 + bne mn10300_dcache_flush_range_loop + +mn10300_dcache_flush_range_end: + ret [d2,d3],8 + +############################################################################### +# +# void mn10300_dcache_flush_inv(void) +# Flush the entire data cache and invalidate all entries +# +############################################################################### + ALIGN +mn10300_dcache_flush_inv: + movhu (CHCTR),d0 + btst CHCTR_DCEN,d0 + beq mn10300_dcache_flush_inv_end + + # hit each line in the dcache with an unconditional purge + mov DCACHE_PURGE(0,0),a1 # dcache purge request address + mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries + +mn10300_dcache_flush_inv_loop: + mov (a1),d0 # unconditional purge + + add L1_CACHE_BYTES,a1 + add -1,d1 + bne mn10300_dcache_flush_inv_loop + +mn10300_dcache_flush_inv_end: + ret [],0 + +############################################################################### +# +# void mn10300_dcache_flush_inv_page(unsigned start) +# void mn10300_dcache_flush_inv_range(unsigned start, unsigned end) +# void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size) +# Flush and invalidate a range of addresses on a page in the dcache +# +############################################################################### + ALIGN +mn10300_dcache_flush_inv_page: + mov PAGE_SIZE,d1 +mn10300_dcache_flush_inv_range2: + add d0,d1 +mn10300_dcache_flush_inv_range: + movm [d2,d3],(sp) + movhu (CHCTR),d2 + btst CHCTR_DCEN,d2 + beq mn10300_dcache_flush_inv_range_end + + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start + # addr down + mov d0,a1 + + add L1_CACHE_BYTES,d1 # round end addr up + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 + + # write a request to flush and invalidate all instances of an address + # from the cache + mov DCACHE_PURGE(0,0),a0 + mov a1,d0 + and L1_CACHE_TAG_ENTRY,d0 + add d0,a0 # starting dcache purge control + # reg address + + sub a1,d1 + lsr L1_CACHE_SHIFT,d1 # total number of entries to + # examine + +mn10300_dcache_flush_inv_range_loop: + mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line + # in all ways + + add L1_CACHE_BYTES,a0 + add L1_CACHE_BYTES,a1 + and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0 + add -1,d1 + bne mn10300_dcache_flush_inv_range_loop + +mn10300_dcache_flush_inv_range_end: + ret [d2,d3],8 diff --git a/arch/mn10300/mm/cache-flush-mn10300.S b/arch/mn10300/mm/cache-flush-mn10300.S deleted file mode 100644 index c8ed1cbac107..000000000000 --- a/arch/mn10300/mm/cache-flush-mn10300.S +++ /dev/null @@ -1,192 +0,0 @@ -/* MN10300 CPU core caching routines - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include - - .am33_2 - .globl mn10300_dcache_flush - .globl mn10300_dcache_flush_page - .globl mn10300_dcache_flush_range - .globl mn10300_dcache_flush_range2 - .globl mn10300_dcache_flush_inv - .globl mn10300_dcache_flush_inv_page - .globl mn10300_dcache_flush_inv_range - .globl mn10300_dcache_flush_inv_range2 - -############################################################################### -# -# void mn10300_dcache_flush(void) -# Flush the entire data cache back to RAM -# -############################################################################### - ALIGN -mn10300_dcache_flush: - movhu (CHCTR),d0 - btst CHCTR_DCEN,d0 - beq mn10300_dcache_flush_end - - # read the addresses tagged in the cache's tag RAM and attempt to flush - # those addresses specifically - # - we rely on the hardware to filter out invalid tag entry addresses - mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address - mov DCACHE_PURGE(0,0),a1 # dcache purge request address - mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries - -mn10300_dcache_flush_loop: - mov (a0),d0 - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 - or L1_CACHE_TAG_VALID,d0 # retain valid entries in the - # cache - mov d0,(a1) # conditional purge - -mn10300_dcache_flush_skip: - add L1_CACHE_BYTES,a0 - add L1_CACHE_BYTES,a1 - add -1,d1 - bne mn10300_dcache_flush_loop - -mn10300_dcache_flush_end: - ret [],0 - -############################################################################### -# -# void mn10300_dcache_flush_page(unsigned start) -# void mn10300_dcache_flush_range(unsigned start, unsigned end) -# void mn10300_dcache_flush_range2(unsigned start, unsigned size) -# Flush a range of addresses on a page in the dcache -# -############################################################################### - ALIGN -mn10300_dcache_flush_page: - mov PAGE_SIZE,d1 -mn10300_dcache_flush_range2: - add d0,d1 -mn10300_dcache_flush_range: - movm [d2,d3],(sp) - - movhu (CHCTR),d2 - btst CHCTR_DCEN,d2 - beq mn10300_dcache_flush_range_end - - # round start addr down - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 - mov d0,a1 - - add L1_CACHE_BYTES,d1 # round end addr up - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 - - # write a request to flush all instances of an address from the cache - mov DCACHE_PURGE(0,0),a0 - mov a1,d0 - and L1_CACHE_TAG_ENTRY,d0 - add d0,a0 # starting dcache purge control - # reg address - - sub a1,d1 - lsr L1_CACHE_SHIFT,d1 # total number of entries to - # examine - - or L1_CACHE_TAG_VALID,a1 # retain valid entries in the - # cache - -mn10300_dcache_flush_range_loop: - mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line - # all ways - - add L1_CACHE_BYTES,a0 - add L1_CACHE_BYTES,a1 - and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0 - add -1,d1 - bne mn10300_dcache_flush_range_loop - -mn10300_dcache_flush_range_end: - ret [d2,d3],8 - -############################################################################### -# -# void mn10300_dcache_flush_inv(void) -# Flush the entire data cache and invalidate all entries -# -############################################################################### - ALIGN -mn10300_dcache_flush_inv: - movhu (CHCTR),d0 - btst CHCTR_DCEN,d0 - beq mn10300_dcache_flush_inv_end - - # hit each line in the dcache with an unconditional purge - mov DCACHE_PURGE(0,0),a1 # dcache purge request address - mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries - -mn10300_dcache_flush_inv_loop: - mov (a1),d0 # unconditional purge - - add L1_CACHE_BYTES,a1 - add -1,d1 - bne mn10300_dcache_flush_inv_loop - -mn10300_dcache_flush_inv_end: - ret [],0 - -############################################################################### -# -# void mn10300_dcache_flush_inv_page(unsigned start) -# void mn10300_dcache_flush_inv_range(unsigned start, unsigned end) -# void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size) -# Flush and invalidate a range of addresses on a page in the dcache -# -############################################################################### - ALIGN -mn10300_dcache_flush_inv_page: - mov PAGE_SIZE,d1 -mn10300_dcache_flush_inv_range2: - add d0,d1 -mn10300_dcache_flush_inv_range: - movm [d2,d3],(sp) - movhu (CHCTR),d2 - btst CHCTR_DCEN,d2 - beq mn10300_dcache_flush_inv_range_end - - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start - # addr down - mov d0,a1 - - add L1_CACHE_BYTES,d1 # round end addr up - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 - - # write a request to flush and invalidate all instances of an address - # from the cache - mov DCACHE_PURGE(0,0),a0 - mov a1,d0 - and L1_CACHE_TAG_ENTRY,d0 - add d0,a0 # starting dcache purge control - # reg address - - sub a1,d1 - lsr L1_CACHE_SHIFT,d1 # total number of entries to - # examine - -mn10300_dcache_flush_inv_range_loop: - mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line - # in all ways - - add L1_CACHE_BYTES,a0 - add L1_CACHE_BYTES,a1 - and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0 - add -1,d1 - bne mn10300_dcache_flush_inv_range_loop - -mn10300_dcache_flush_inv_range_end: - ret [d2,d3],8 diff --git a/arch/mn10300/mm/cache-inv-by-tag.S b/arch/mn10300/mm/cache-inv-by-tag.S new file mode 100644 index 000000000000..e839d0aedd69 --- /dev/null +++ b/arch/mn10300/mm/cache-inv-by-tag.S @@ -0,0 +1,289 @@ +/* MN10300 CPU core caching routines + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include +#include + +#define mn10300_dcache_inv_range_intr_interval \ + +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1) + +#if mn10300_dcache_inv_range_intr_interval > 0xff +#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less +#endif + + .am33_2 + + .globl mn10300_icache_inv + .globl mn10300_dcache_inv + .globl mn10300_dcache_inv_range + .globl mn10300_dcache_inv_range2 + .globl mn10300_dcache_inv_page + +############################################################################### +# +# void mn10300_icache_inv(void) +# Invalidate the entire icache +# +############################################################################### + ALIGN +mn10300_icache_inv: + mov CHCTR,a0 + + movhu (a0),d0 + btst CHCTR_ICEN,d0 + beq mn10300_icache_inv_end + + mov epsw,d1 + and ~EPSW_IE,epsw + nop + nop + + # disable the icache + and ~CHCTR_ICEN,d0 + movhu d0,(a0) + + # and wait for it to calm down + setlb + movhu (a0),d0 + btst CHCTR_ICBUSY,d0 + lne + + # invalidate + or CHCTR_ICINV,d0 + movhu d0,(a0) + + # wait for the cache to finish + mov CHCTR,a0 + setlb + movhu (a0),d0 + btst CHCTR_ICBUSY,d0 + lne + + # and reenable it + and ~CHCTR_ICINV,d0 + or CHCTR_ICEN,d0 + movhu d0,(a0) + movhu (a0),d0 + + mov d1,epsw + +mn10300_icache_inv_end: + ret [],0 + +############################################################################### +# +# void mn10300_dcache_inv(void) +# Invalidate the entire dcache +# +############################################################################### + ALIGN +mn10300_dcache_inv: + mov CHCTR,a0 + + movhu (a0),d0 + btst CHCTR_DCEN,d0 + beq mn10300_dcache_inv_end + + mov epsw,d1 + and ~EPSW_IE,epsw + nop + nop + + # disable the dcache + and ~CHCTR_DCEN,d0 + movhu d0,(a0) + + # and wait for it to calm down + setlb + movhu (a0),d0 + btst CHCTR_DCBUSY,d0 + lne + + # invalidate + or CHCTR_DCINV,d0 + movhu d0,(a0) + + # wait for the cache to finish + mov CHCTR,a0 + setlb + movhu (a0),d0 + btst CHCTR_DCBUSY,d0 + lne + + # and reenable it + and ~CHCTR_DCINV,d0 + or CHCTR_DCEN,d0 + movhu d0,(a0) + movhu (a0),d0 + + mov d1,epsw + +mn10300_dcache_inv_end: + ret [],0 + +############################################################################### +# +# void mn10300_dcache_inv_range(unsigned start, unsigned end) +# void mn10300_dcache_inv_range2(unsigned start, unsigned size) +# void mn10300_dcache_inv_page(unsigned start) +# Invalidate a range of addresses on a page in the dcache +# +############################################################################### + ALIGN +mn10300_dcache_inv_page: + mov PAGE_SIZE,d1 +mn10300_dcache_inv_range2: + add d0,d1 +mn10300_dcache_inv_range: + movm [d2,d3,a2],(sp) + mov CHCTR,a2 + + movhu (a2),d2 + btst CHCTR_DCEN,d2 + beq mn10300_dcache_inv_range_end + + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start + # addr down + mov d0,a1 + + add L1_CACHE_BYTES,d1 # round end addr up + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 + + clr d2 # we're going to clear tag ram + # entries + + # read the tags from the tag RAM, and if they indicate a valid dirty + # cache line then invalidate that line + mov DCACHE_TAG(0,0),a0 + mov a1,d0 + and L1_CACHE_TAG_ENTRY,d0 + add d0,a0 # starting dcache tag RAM + # access address + + sub a1,d1 + lsr L1_CACHE_SHIFT,d1 # total number of entries to + # examine + + and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base + +mn10300_dcache_inv_range_outer_loop: + # disable interrupts + mov epsw,d3 + and ~EPSW_IE,epsw + nop # note that reading CHCTR and + # AND'ing D0 occupy two delay + # slots after disabling + # interrupts + + # disable the dcache + movhu (a2),d0 + and ~CHCTR_DCEN,d0 + movhu d0,(a2) + + # and wait for it to calm down + setlb + movhu (a2),d0 + btst CHCTR_DCBUSY,d0 + lne + +mn10300_dcache_inv_range_loop: + + # process the way 0 slot + mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot + btst L1_CACHE_TAG_VALID,d0 + beq mn10300_dcache_inv_range_skip_0 # jump if this cacheline is not + # valid + + xor a1,d0 + lsr 12,d0 + bne mn10300_dcache_inv_range_skip_0 # jump if not this cacheline + + mov d2,(a0) # kill the tag + +mn10300_dcache_inv_range_skip_0: + + # process the way 1 slot + mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot + btst L1_CACHE_TAG_VALID,d0 + beq mn10300_dcache_inv_range_skip_1 # jump if this cacheline is not + # valid + + xor a1,d0 + lsr 12,d0 + bne mn10300_dcache_inv_range_skip_1 # jump if not this cacheline + + mov d2,(a0) # kill the tag + +mn10300_dcache_inv_range_skip_1: + + # process the way 2 slot + mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot + btst L1_CACHE_TAG_VALID,d0 + beq mn10300_dcache_inv_range_skip_2 # jump if this cacheline is not + # valid + + xor a1,d0 + lsr 12,d0 + bne mn10300_dcache_inv_range_skip_2 # jump if not this cacheline + + mov d2,(a0) # kill the tag + +mn10300_dcache_inv_range_skip_2: + + # process the way 3 slot + mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot + btst L1_CACHE_TAG_VALID,d0 + beq mn10300_dcache_inv_range_skip_3 # jump if this cacheline is not + # valid + + xor a1,d0 + lsr 12,d0 + bne mn10300_dcache_inv_range_skip_3 # jump if not this cacheline + + mov d2,(a0) # kill the tag + +mn10300_dcache_inv_range_skip_3: + + # approx every N steps we re-enable the cache and see if there are any + # interrupts to be processed + # we also break out if we've reached the end of the loop + # (the bottom nibble of the count is zero in both cases) + add L1_CACHE_BYTES,a0 + add L1_CACHE_BYTES,a1 + add -1,d1 + btst mn10300_dcache_inv_range_intr_interval,d1 + bne mn10300_dcache_inv_range_loop + + # wait for the cache to finish what it's doing + setlb + movhu (a2),d0 + btst CHCTR_DCBUSY,d0 + lne + + # and reenable it + or CHCTR_DCEN,d0 + movhu d0,(a2) + movhu (a2),d0 + + # re-enable interrupts + # - we don't bother with delay NOPs as we'll have enough instructions + # before we disable interrupts again to give the interrupts a chance + # to happen + mov d3,epsw + + # go around again if the counter hasn't yet reached zero + add 0,d1 + bne mn10300_dcache_inv_range_outer_loop + +mn10300_dcache_inv_range_end: + ret [d2,d3,a2],12 diff --git a/arch/mn10300/mm/cache-mn10300.S b/arch/mn10300/mm/cache-mn10300.S deleted file mode 100644 index e839d0aedd69..000000000000 --- a/arch/mn10300/mm/cache-mn10300.S +++ /dev/null @@ -1,289 +0,0 @@ -/* MN10300 CPU core caching routines - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#include -#include -#include -#include -#include - -#define mn10300_dcache_inv_range_intr_interval \ - +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1) - -#if mn10300_dcache_inv_range_intr_interval > 0xff -#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less -#endif - - .am33_2 - - .globl mn10300_icache_inv - .globl mn10300_dcache_inv - .globl mn10300_dcache_inv_range - .globl mn10300_dcache_inv_range2 - .globl mn10300_dcache_inv_page - -############################################################################### -# -# void mn10300_icache_inv(void) -# Invalidate the entire icache -# -############################################################################### - ALIGN -mn10300_icache_inv: - mov CHCTR,a0 - - movhu (a0),d0 - btst CHCTR_ICEN,d0 - beq mn10300_icache_inv_end - - mov epsw,d1 - and ~EPSW_IE,epsw - nop - nop - - # disable the icache - and ~CHCTR_ICEN,d0 - movhu d0,(a0) - - # and wait for it to calm down - setlb - movhu (a0),d0 - btst CHCTR_ICBUSY,d0 - lne - - # invalidate - or CHCTR_ICINV,d0 - movhu d0,(a0) - - # wait for the cache to finish - mov CHCTR,a0 - setlb - movhu (a0),d0 - btst CHCTR_ICBUSY,d0 - lne - - # and reenable it - and ~CHCTR_ICINV,d0 - or CHCTR_ICEN,d0 - movhu d0,(a0) - movhu (a0),d0 - - mov d1,epsw - -mn10300_icache_inv_end: - ret [],0 - -############################################################################### -# -# void mn10300_dcache_inv(void) -# Invalidate the entire dcache -# -############################################################################### - ALIGN -mn10300_dcache_inv: - mov CHCTR,a0 - - movhu (a0),d0 - btst CHCTR_DCEN,d0 - beq mn10300_dcache_inv_end - - mov epsw,d1 - and ~EPSW_IE,epsw - nop - nop - - # disable the dcache - and ~CHCTR_DCEN,d0 - movhu d0,(a0) - - # and wait for it to calm down - setlb - movhu (a0),d0 - btst CHCTR_DCBUSY,d0 - lne - - # invalidate - or CHCTR_DCINV,d0 - movhu d0,(a0) - - # wait for the cache to finish - mov CHCTR,a0 - setlb - movhu (a0),d0 - btst CHCTR_DCBUSY,d0 - lne - - # and reenable it - and ~CHCTR_DCINV,d0 - or CHCTR_DCEN,d0 - movhu d0,(a0) - movhu (a0),d0 - - mov d1,epsw - -mn10300_dcache_inv_end: - ret [],0 - -############################################################################### -# -# void mn10300_dcache_inv_range(unsigned start, unsigned end) -# void mn10300_dcache_inv_range2(unsigned start, unsigned size) -# void mn10300_dcache_inv_page(unsigned start) -# Invalidate a range of addresses on a page in the dcache -# -############################################################################### - ALIGN -mn10300_dcache_inv_page: - mov PAGE_SIZE,d1 -mn10300_dcache_inv_range2: - add d0,d1 -mn10300_dcache_inv_range: - movm [d2,d3,a2],(sp) - mov CHCTR,a2 - - movhu (a2),d2 - btst CHCTR_DCEN,d2 - beq mn10300_dcache_inv_range_end - - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start - # addr down - mov d0,a1 - - add L1_CACHE_BYTES,d1 # round end addr up - and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 - - clr d2 # we're going to clear tag ram - # entries - - # read the tags from the tag RAM, and if they indicate a valid dirty - # cache line then invalidate that line - mov DCACHE_TAG(0,0),a0 - mov a1,d0 - and L1_CACHE_TAG_ENTRY,d0 - add d0,a0 # starting dcache tag RAM - # access address - - sub a1,d1 - lsr L1_CACHE_SHIFT,d1 # total number of entries to - # examine - - and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base - -mn10300_dcache_inv_range_outer_loop: - # disable interrupts - mov epsw,d3 - and ~EPSW_IE,epsw - nop # note that reading CHCTR and - # AND'ing D0 occupy two delay - # slots after disabling - # interrupts - - # disable the dcache - movhu (a2),d0 - and ~CHCTR_DCEN,d0 - movhu d0,(a2) - - # and wait for it to calm down - setlb - movhu (a2),d0 - btst CHCTR_DCBUSY,d0 - lne - -mn10300_dcache_inv_range_loop: - - # process the way 0 slot - mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot - btst L1_CACHE_TAG_VALID,d0 - beq mn10300_dcache_inv_range_skip_0 # jump if this cacheline is not - # valid - - xor a1,d0 - lsr 12,d0 - bne mn10300_dcache_inv_range_skip_0 # jump if not this cacheline - - mov d2,(a0) # kill the tag - -mn10300_dcache_inv_range_skip_0: - - # process the way 1 slot - mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot - btst L1_CACHE_TAG_VALID,d0 - beq mn10300_dcache_inv_range_skip_1 # jump if this cacheline is not - # valid - - xor a1,d0 - lsr 12,d0 - bne mn10300_dcache_inv_range_skip_1 # jump if not this cacheline - - mov d2,(a0) # kill the tag - -mn10300_dcache_inv_range_skip_1: - - # process the way 2 slot - mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot - btst L1_CACHE_TAG_VALID,d0 - beq mn10300_dcache_inv_range_skip_2 # jump if this cacheline is not - # valid - - xor a1,d0 - lsr 12,d0 - bne mn10300_dcache_inv_range_skip_2 # jump if not this cacheline - - mov d2,(a0) # kill the tag - -mn10300_dcache_inv_range_skip_2: - - # process the way 3 slot - mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot - btst L1_CACHE_TAG_VALID,d0 - beq mn10300_dcache_inv_range_skip_3 # jump if this cacheline is not - # valid - - xor a1,d0 - lsr 12,d0 - bne mn10300_dcache_inv_range_skip_3 # jump if not this cacheline - - mov d2,(a0) # kill the tag - -mn10300_dcache_inv_range_skip_3: - - # approx every N steps we re-enable the cache and see if there are any - # interrupts to be processed - # we also break out if we've reached the end of the loop - # (the bottom nibble of the count is zero in both cases) - add L1_CACHE_BYTES,a0 - add L1_CACHE_BYTES,a1 - add -1,d1 - btst mn10300_dcache_inv_range_intr_interval,d1 - bne mn10300_dcache_inv_range_loop - - # wait for the cache to finish what it's doing - setlb - movhu (a2),d0 - btst CHCTR_DCBUSY,d0 - lne - - # and reenable it - or CHCTR_DCEN,d0 - movhu d0,(a2) - movhu (a2),d0 - - # re-enable interrupts - # - we don't bother with delay NOPs as we'll have enough instructions - # before we disable interrupts again to give the interrupts a chance - # to happen - mov d3,epsw - - # go around again if the counter hasn't yet reached zero - add 0,d1 - bne mn10300_dcache_inv_range_outer_loop - -mn10300_dcache_inv_range_end: - ret [d2,d3,a2],12 -- cgit v1.2.3 From 9b287bf9924cedaf1accd7293db3627bef7c46e3 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:44 +0100 Subject: MN10300: Cacheflush functions should take unsigned long addresses The functions that perform cache flushing should take addresses of unsigned long type, not unsigned int. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/include/asm/cacheflush.h | 18 +++++++++--------- arch/mn10300/mm/cache-flush-by-tag.S | 12 ++++++------ 2 files changed, 15 insertions(+), 15 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h index 0b5d00438374..a9f41688961a 100644 --- a/arch/mn10300/include/asm/cacheflush.h +++ b/arch/mn10300/include/asm/cacheflush.h @@ -22,18 +22,18 @@ #ifdef CONFIG_MN10300_CACHE_ENABLED extern void mn10300_icache_inv(void); extern void mn10300_dcache_inv(void); -extern void mn10300_dcache_inv_page(unsigned start); -extern void mn10300_dcache_inv_range(unsigned start, unsigned end); -extern void mn10300_dcache_inv_range2(unsigned start, unsigned size); +extern void mn10300_dcache_inv_page(unsigned long start); +extern void mn10300_dcache_inv_range(unsigned long start, unsigned long end); +extern void mn10300_dcache_inv_range2(unsigned long start, unsigned long size); #ifdef CONFIG_MN10300_CACHE_WBACK extern void mn10300_dcache_flush(void); -extern void mn10300_dcache_flush_page(unsigned start); -extern void mn10300_dcache_flush_range(unsigned start, unsigned end); -extern void mn10300_dcache_flush_range2(unsigned start, unsigned size); +extern void mn10300_dcache_flush_page(unsigned long start); +extern void mn10300_dcache_flush_range(unsigned long start, unsigned long end); +extern void mn10300_dcache_flush_range2(unsigned long start, unsigned long size); extern void mn10300_dcache_flush_inv(void); -extern void mn10300_dcache_flush_inv_page(unsigned start); -extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end); -extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size); +extern void mn10300_dcache_flush_inv_page(unsigned long start); +extern void mn10300_dcache_flush_inv_range(unsigned long start, unsigned long end); +extern void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long size); #else #define mn10300_dcache_flush() do {} while (0) #define mn10300_dcache_flush_page(start) do {} while (0) diff --git a/arch/mn10300/mm/cache-flush-by-tag.S b/arch/mn10300/mm/cache-flush-by-tag.S index c8ed1cbac107..8fe90e49b96c 100644 --- a/arch/mn10300/mm/cache-flush-by-tag.S +++ b/arch/mn10300/mm/cache-flush-by-tag.S @@ -62,9 +62,9 @@ mn10300_dcache_flush_end: ############################################################################### # -# void mn10300_dcache_flush_page(unsigned start) -# void mn10300_dcache_flush_range(unsigned start, unsigned end) -# void mn10300_dcache_flush_range2(unsigned start, unsigned size) +# void mn10300_dcache_flush_page(unsigned long start) +# void mn10300_dcache_flush_range(unsigned long start, unsigned long end) +# void mn10300_dcache_flush_range2(unsigned long start, unsigned long size) # Flush a range of addresses on a page in the dcache # ############################################################################### @@ -142,9 +142,9 @@ mn10300_dcache_flush_inv_end: ############################################################################### # -# void mn10300_dcache_flush_inv_page(unsigned start) -# void mn10300_dcache_flush_inv_range(unsigned start, unsigned end) -# void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size) +# void mn10300_dcache_flush_inv_page(unsigned long start) +# void mn10300_dcache_flush_inv_range(unsigned long start, unsigned long end) +# void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long size) # Flush and invalidate a range of addresses on a page in the dcache # ############################################################################### -- cgit v1.2.3 From 0bd3eb6ca772775da6125ea5b044d4257473d18d Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:45 +0100 Subject: MN10300: SMP: Differentiate local cache flushing Differentiate local cache flushing from global cache flushing so that they can be done differently on SMP systems. Rename the cache functions from: mn10300_[id]cache_*() to: mn10300_[id]_localcache_*() and on a UP system, assign the global labels to the local labels. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/include/asm/cacheflush.h | 50 ++++++ arch/mn10300/mm/cache-flush-by-tag.S | 143 +++++++++++----- arch/mn10300/mm/cache-inv-by-tag.S | 199 +++++++++++++++-------- arch/mn10300/proc-mn103e010/include/proc/cache.h | 9 + 4 files changed, 289 insertions(+), 112 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h index a9f41688961a..748143f65418 100644 --- a/arch/mn10300/include/asm/cacheflush.h +++ b/arch/mn10300/include/asm/cacheflush.h @@ -20,12 +20,31 @@ * Primitive routines */ #ifdef CONFIG_MN10300_CACHE_ENABLED +extern void mn10300_local_icache_inv(void); +extern void mn10300_local_icache_inv_page(unsigned long start); +extern void mn10300_local_icache_inv_range(unsigned long start, unsigned long end); +extern void mn10300_local_icache_inv_range2(unsigned long start, unsigned long size); +extern void mn10300_local_dcache_inv(void); +extern void mn10300_local_dcache_inv_page(unsigned long start); +extern void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end); +extern void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size); extern void mn10300_icache_inv(void); +extern void mn10300_icache_inv_page(unsigned long start); +extern void mn10300_icache_inv_range(unsigned long start, unsigned long end); +extern void mn10300_icache_inv_range2(unsigned long start, unsigned long size); extern void mn10300_dcache_inv(void); extern void mn10300_dcache_inv_page(unsigned long start); extern void mn10300_dcache_inv_range(unsigned long start, unsigned long end); extern void mn10300_dcache_inv_range2(unsigned long start, unsigned long size); #ifdef CONFIG_MN10300_CACHE_WBACK +extern void mn10300_local_dcache_flush(void); +extern void mn10300_local_dcache_flush_page(unsigned long start); +extern void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end); +extern void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size); +extern void mn10300_local_dcache_flush_inv(void); +extern void mn10300_local_dcache_flush_inv_page(unsigned long start); +extern void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end); +extern void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size); extern void mn10300_dcache_flush(void); extern void mn10300_dcache_flush_page(unsigned long start); extern void mn10300_dcache_flush_range(unsigned long start, unsigned long end); @@ -35,6 +54,18 @@ extern void mn10300_dcache_flush_inv_page(unsigned long start); extern void mn10300_dcache_flush_inv_range(unsigned long start, unsigned long end); extern void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long size); #else +#define mn10300_local_dcache_flush() do {} while (0) +#define mn10300_local_dcache_flush_page(start) do {} while (0) +#define mn10300_local_dcache_flush_range(start, end) do {} while (0) +#define mn10300_local_dcache_flush_range2(start, size) do {} while (0) +#define mn10300_local_dcache_flush_inv() \ + mn10300_local_dcache_inv() +#define mn10300_local_dcache_flush_inv_page(start) \ + mn10300_local_dcache_inv_page(start) +#define mn10300_local_dcache_flush_inv_range(start, end) \ + mn10300_local_dcache_inv_range(start, end) +#define mn10300_local_dcache_flush_inv_range2(start, size) \ + mn10300_local_dcache_inv_range2(start, size) #define mn10300_dcache_flush() do {} while (0) #define mn10300_dcache_flush_page(start) do {} while (0) #define mn10300_dcache_flush_range(start, end) do {} while (0) @@ -48,7 +79,26 @@ extern void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long s mn10300_dcache_inv_range2((start), (size)) #endif /* CONFIG_MN10300_CACHE_WBACK */ #else +#define mn10300_local_icache_inv() do {} while (0) +#define mn10300_local_icache_inv_page(start) do {} while (0) +#define mn10300_local_icache_inv_range(start, end) do {} while (0) +#define mn10300_local_icache_inv_range2(start, size) do {} while (0) +#define mn10300_local_dcache_inv() do {} while (0) +#define mn10300_local_dcache_inv_page(start) do {} while (0) +#define mn10300_local_dcache_inv_range(start, end) do {} while (0) +#define mn10300_local_dcache_inv_range2(start, size) do {} while (0) +#define mn10300_local_dcache_flush() do {} while (0) +#define mn10300_local_dcache_flush_inv_page(start) do {} while (0) +#define mn10300_local_dcache_flush_inv() do {} while (0) +#define mn10300_local_dcache_flush_inv_range(start, end)do {} while (0) +#define mn10300_local_dcache_flush_inv_range2(start, size) do {} while (0) +#define mn10300_local_dcache_flush_page(start) do {} while (0) +#define mn10300_local_dcache_flush_range(start, end) do {} while (0) +#define mn10300_local_dcache_flush_range2(start, size) do {} while (0) #define mn10300_icache_inv() do {} while (0) +#define mn10300_icache_inv_page(start) do {} while (0) +#define mn10300_icache_inv_range(start, end) do {} while (0) +#define mn10300_icache_inv_range2(start, size) do {} while (0) #define mn10300_dcache_inv() do {} while (0) #define mn10300_dcache_inv_page(start) do {} while (0) #define mn10300_dcache_inv_range(start, end) do {} while (0) diff --git a/arch/mn10300/mm/cache-flush-by-tag.S b/arch/mn10300/mm/cache-flush-by-tag.S index 8fe90e49b96c..5cd6a27dd63e 100644 --- a/arch/mn10300/mm/cache-flush-by-tag.S +++ b/arch/mn10300/mm/cache-flush-by-tag.S @@ -1,4 +1,4 @@ -/* MN10300 CPU core caching routines +/* MN10300 CPU core caching routines, using direct tag flushing * * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) @@ -14,8 +14,11 @@ #include #include #include +#include .am33_2 + +#ifndef CONFIG_SMP .globl mn10300_dcache_flush .globl mn10300_dcache_flush_page .globl mn10300_dcache_flush_range @@ -25,17 +28,30 @@ .globl mn10300_dcache_flush_inv_range .globl mn10300_dcache_flush_inv_range2 +mn10300_dcache_flush = mn10300_local_dcache_flush +mn10300_dcache_flush_page = mn10300_local_dcache_flush_page +mn10300_dcache_flush_range = mn10300_local_dcache_flush_range +mn10300_dcache_flush_range2 = mn10300_local_dcache_flush_range2 +mn10300_dcache_flush_inv = mn10300_local_dcache_flush_inv +mn10300_dcache_flush_inv_page = mn10300_local_dcache_flush_inv_page +mn10300_dcache_flush_inv_range = mn10300_local_dcache_flush_inv_range +mn10300_dcache_flush_inv_range2 = mn10300_local_dcache_flush_inv_range2 + +#endif /* !CONFIG_SMP */ + ############################################################################### # -# void mn10300_dcache_flush(void) +# void mn10300_local_dcache_flush(void) # Flush the entire data cache back to RAM # ############################################################################### ALIGN -mn10300_dcache_flush: + .globl mn10300_local_dcache_flush + .type mn10300_local_dcache_flush,@function +mn10300_local_dcache_flush: movhu (CHCTR),d0 btst CHCTR_DCEN,d0 - beq mn10300_dcache_flush_end + beq mn10300_local_dcache_flush_end # read the addresses tagged in the cache's tag RAM and attempt to flush # those addresses specifically @@ -44,41 +60,56 @@ mn10300_dcache_flush: mov DCACHE_PURGE(0,0),a1 # dcache purge request address mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries -mn10300_dcache_flush_loop: +mn10300_local_dcache_flush_loop: mov (a0),d0 and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 or L1_CACHE_TAG_VALID,d0 # retain valid entries in the # cache mov d0,(a1) # conditional purge -mn10300_dcache_flush_skip: add L1_CACHE_BYTES,a0 add L1_CACHE_BYTES,a1 add -1,d1 - bne mn10300_dcache_flush_loop + bne mn10300_local_dcache_flush_loop -mn10300_dcache_flush_end: +mn10300_local_dcache_flush_end: ret [],0 + .size mn10300_local_dcache_flush,.-mn10300_local_dcache_flush ############################################################################### # -# void mn10300_dcache_flush_page(unsigned long start) -# void mn10300_dcache_flush_range(unsigned long start, unsigned long end) -# void mn10300_dcache_flush_range2(unsigned long start, unsigned long size) +# void mn10300_local_dcache_flush_page(unsigned long start) +# void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end) +# void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size) # Flush a range of addresses on a page in the dcache # ############################################################################### ALIGN -mn10300_dcache_flush_page: + .globl mn10300_local_dcache_flush_page + .globl mn10300_local_dcache_flush_range + .globl mn10300_local_dcache_flush_range2 + .type mn10300_local_dcache_flush_page,@function + .type mn10300_local_dcache_flush_range,@function + .type mn10300_local_dcache_flush_range2,@function +mn10300_local_dcache_flush_page: + and ~(PAGE_SIZE-1),d0 mov PAGE_SIZE,d1 -mn10300_dcache_flush_range2: +mn10300_local_dcache_flush_range2: add d0,d1 -mn10300_dcache_flush_range: - movm [d2,d3],(sp) +mn10300_local_dcache_flush_range: + movm [d2],(sp) movhu (CHCTR),d2 btst CHCTR_DCEN,d2 - beq mn10300_dcache_flush_range_end + beq mn10300_local_dcache_flush_range_end + + sub d0,d1,a0 + cmp MN10300_DCACHE_FLUSH_BORDER,a0 + ble 1f + + movm (sp),[d2] + bra mn10300_local_dcache_flush +1: # round start addr down and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 @@ -101,7 +132,7 @@ mn10300_dcache_flush_range: or L1_CACHE_TAG_VALID,a1 # retain valid entries in the # cache -mn10300_dcache_flush_range_loop: +mn10300_local_dcache_flush_range_loop: mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line # all ways @@ -109,55 +140,80 @@ mn10300_dcache_flush_range_loop: add L1_CACHE_BYTES,a1 and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0 add -1,d1 - bne mn10300_dcache_flush_range_loop + bne mn10300_local_dcache_flush_range_loop + +mn10300_local_dcache_flush_range_end: + ret [d2],4 -mn10300_dcache_flush_range_end: - ret [d2,d3],8 + .size mn10300_local_dcache_flush_page,.-mn10300_local_dcache_flush_page + .size mn10300_local_dcache_flush_range,.-mn10300_local_dcache_flush_range + .size mn10300_local_dcache_flush_range2,.-mn10300_local_dcache_flush_range2 ############################################################################### # -# void mn10300_dcache_flush_inv(void) +# void mn10300_local_dcache_flush_inv(void) # Flush the entire data cache and invalidate all entries # ############################################################################### ALIGN -mn10300_dcache_flush_inv: + .globl mn10300_local_dcache_flush_inv + .type mn10300_local_dcache_flush_inv,@function +mn10300_local_dcache_flush_inv: movhu (CHCTR),d0 btst CHCTR_DCEN,d0 - beq mn10300_dcache_flush_inv_end + beq mn10300_local_dcache_flush_inv_end - # hit each line in the dcache with an unconditional purge - mov DCACHE_PURGE(0,0),a1 # dcache purge request address - mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries + mov L1_CACHE_NENTRIES,d1 + clr a1 -mn10300_dcache_flush_inv_loop: - mov (a1),d0 # unconditional purge +mn10300_local_dcache_flush_inv_loop: + mov (DCACHE_PURGE_WAY0(0),a1),d0 # unconditional purge + mov (DCACHE_PURGE_WAY1(0),a1),d0 # unconditional purge + mov (DCACHE_PURGE_WAY2(0),a1),d0 # unconditional purge + mov (DCACHE_PURGE_WAY3(0),a1),d0 # unconditional purge add L1_CACHE_BYTES,a1 add -1,d1 - bne mn10300_dcache_flush_inv_loop + bne mn10300_local_dcache_flush_inv_loop -mn10300_dcache_flush_inv_end: +mn10300_local_dcache_flush_inv_end: ret [],0 + .size mn10300_local_dcache_flush_inv,.-mn10300_local_dcache_flush_inv ############################################################################### # -# void mn10300_dcache_flush_inv_page(unsigned long start) -# void mn10300_dcache_flush_inv_range(unsigned long start, unsigned long end) -# void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long size) +# void mn10300_local_dcache_flush_inv_page(unsigned long start) +# void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end) +# void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size) # Flush and invalidate a range of addresses on a page in the dcache # ############################################################################### ALIGN -mn10300_dcache_flush_inv_page: + .globl mn10300_local_dcache_flush_inv_page + .globl mn10300_local_dcache_flush_inv_range + .globl mn10300_local_dcache_flush_inv_range2 + .type mn10300_local_dcache_flush_inv_page,@function + .type mn10300_local_dcache_flush_inv_range,@function + .type mn10300_local_dcache_flush_inv_range2,@function +mn10300_local_dcache_flush_inv_page: + and ~(PAGE_SIZE-1),d0 mov PAGE_SIZE,d1 -mn10300_dcache_flush_inv_range2: +mn10300_local_dcache_flush_inv_range2: add d0,d1 -mn10300_dcache_flush_inv_range: - movm [d2,d3],(sp) +mn10300_local_dcache_flush_inv_range: + movm [d2],(sp) + movhu (CHCTR),d2 btst CHCTR_DCEN,d2 - beq mn10300_dcache_flush_inv_range_end + beq mn10300_local_dcache_flush_inv_range_end + + sub d0,d1,a0 + cmp MN10300_DCACHE_FLUSH_INV_BORDER,a0 + ble 1f + + movm (sp),[d2] + bra mn10300_local_dcache_flush_inv +1: and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start # addr down @@ -178,7 +234,7 @@ mn10300_dcache_flush_inv_range: lsr L1_CACHE_SHIFT,d1 # total number of entries to # examine -mn10300_dcache_flush_inv_range_loop: +mn10300_local_dcache_flush_inv_range_loop: mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line # in all ways @@ -186,7 +242,10 @@ mn10300_dcache_flush_inv_range_loop: add L1_CACHE_BYTES,a1 and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0 add -1,d1 - bne mn10300_dcache_flush_inv_range_loop + bne mn10300_local_dcache_flush_inv_range_loop -mn10300_dcache_flush_inv_range_end: - ret [d2,d3],8 +mn10300_local_dcache_flush_inv_range_end: + ret [d2],4 + .size mn10300_local_dcache_flush_inv_page,.-mn10300_local_dcache_flush_inv_page + .size mn10300_local_dcache_flush_inv_range,.-mn10300_local_dcache_flush_inv_range + .size mn10300_local_dcache_flush_inv_range2,.-mn10300_local_dcache_flush_inv_range2 diff --git a/arch/mn10300/mm/cache-inv-by-tag.S b/arch/mn10300/mm/cache-inv-by-tag.S index e839d0aedd69..e9713b40c0ff 100644 --- a/arch/mn10300/mm/cache-inv-by-tag.S +++ b/arch/mn10300/mm/cache-inv-by-tag.S @@ -13,40 +13,65 @@ #include #include #include +#include +#include -#define mn10300_dcache_inv_range_intr_interval \ +#define mn10300_local_dcache_inv_range_intr_interval \ +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1) -#if mn10300_dcache_inv_range_intr_interval > 0xff +#if mn10300_local_dcache_inv_range_intr_interval > 0xff #error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less #endif .am33_2 - .globl mn10300_icache_inv - .globl mn10300_dcache_inv - .globl mn10300_dcache_inv_range - .globl mn10300_dcache_inv_range2 - .globl mn10300_dcache_inv_page + .globl mn10300_local_icache_inv_page + .globl mn10300_local_icache_inv_range + .globl mn10300_local_icache_inv_range2 + +mn10300_local_icache_inv_page = mn10300_local_icache_inv +mn10300_local_icache_inv_range = mn10300_local_icache_inv +mn10300_local_icache_inv_range2 = mn10300_local_icache_inv + +#ifndef CONFIG_SMP + .globl mn10300_icache_inv + .globl mn10300_icache_inv_page + .globl mn10300_icache_inv_range + .globl mn10300_icache_inv_range2 + .globl mn10300_dcache_inv + .globl mn10300_dcache_inv_page + .globl mn10300_dcache_inv_range + .globl mn10300_dcache_inv_range2 + +mn10300_icache_inv = mn10300_local_icache_inv +mn10300_icache_inv_page = mn10300_local_icache_inv_page +mn10300_icache_inv_range = mn10300_local_icache_inv_range +mn10300_icache_inv_range2 = mn10300_local_icache_inv_range2 +mn10300_dcache_inv = mn10300_local_dcache_inv +mn10300_dcache_inv_page = mn10300_local_dcache_inv_page +mn10300_dcache_inv_range = mn10300_local_dcache_inv_range +mn10300_dcache_inv_range2 = mn10300_local_dcache_inv_range2 + +#endif /* !CONFIG_SMP */ ############################################################################### # -# void mn10300_icache_inv(void) +# void mn10300_local_icache_inv(void) # Invalidate the entire icache # ############################################################################### ALIGN -mn10300_icache_inv: + .globl mn10300_local_icache_inv + .type mn10300_local_icache_inv,@function +mn10300_local_icache_inv: mov CHCTR,a0 movhu (a0),d0 btst CHCTR_ICEN,d0 - beq mn10300_icache_inv_end + beq mn10300_local_icache_inv_end - mov epsw,d1 - and ~EPSW_IE,epsw - nop - nop +#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) + LOCAL_CLI_SAVE(d1) # disable the icache and ~CHCTR_ICEN,d0 @@ -75,29 +100,36 @@ mn10300_icache_inv: movhu d0,(a0) movhu (a0),d0 - mov d1,epsw + LOCAL_IRQ_RESTORE(d1) +#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ + # invalidate + or CHCTR_ICINV,d0 + movhu d0,(a0) + movhu (a0),d0 +#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ -mn10300_icache_inv_end: +mn10300_local_icache_inv_end: ret [],0 + .size mn10300_local_icache_inv,.-mn10300_local_icache_inv ############################################################################### # -# void mn10300_dcache_inv(void) +# void mn10300_local_dcache_inv(void) # Invalidate the entire dcache # ############################################################################### ALIGN -mn10300_dcache_inv: + .globl mn10300_local_dcache_inv + .type mn10300_local_dcache_inv,@function +mn10300_local_dcache_inv: mov CHCTR,a0 movhu (a0),d0 btst CHCTR_DCEN,d0 - beq mn10300_dcache_inv_end + beq mn10300_local_dcache_inv_end - mov epsw,d1 - and ~EPSW_IE,epsw - nop - nop +#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) + LOCAL_CLI_SAVE(d1) # disable the dcache and ~CHCTR_DCEN,d0 @@ -126,40 +158,69 @@ mn10300_dcache_inv: movhu d0,(a0) movhu (a0),d0 - mov d1,epsw + LOCAL_IRQ_RESTORE(d1) +#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ + # invalidate + or CHCTR_DCINV,d0 + movhu d0,(a0) + movhu (a0),d0 +#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ -mn10300_dcache_inv_end: +mn10300_local_dcache_inv_end: ret [],0 + .size mn10300_local_dcache_inv,.-mn10300_local_dcache_inv ############################################################################### # -# void mn10300_dcache_inv_range(unsigned start, unsigned end) -# void mn10300_dcache_inv_range2(unsigned start, unsigned size) -# void mn10300_dcache_inv_page(unsigned start) +# void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end) +# void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size) +# void mn10300_local_dcache_inv_page(unsigned long start) # Invalidate a range of addresses on a page in the dcache # ############################################################################### ALIGN -mn10300_dcache_inv_page: + .globl mn10300_local_dcache_inv_page + .globl mn10300_local_dcache_inv_range + .globl mn10300_local_dcache_inv_range2 + .type mn10300_local_dcache_inv_page,@function + .type mn10300_local_dcache_inv_range,@function + .type mn10300_local_dcache_inv_range2,@function +mn10300_local_dcache_inv_page: + and ~(PAGE_SIZE-1),d0 mov PAGE_SIZE,d1 -mn10300_dcache_inv_range2: +mn10300_local_dcache_inv_range2: add d0,d1 -mn10300_dcache_inv_range: +mn10300_local_dcache_inv_range: + # If we are in writeback mode we check the start and end alignments, + # and if they're not cacheline-aligned, we must flush any bits outside + # the range that share cachelines with stuff inside the range +#ifdef CONFIG_MN10300_CACHE_WBACK + btst ~(L1_CACHE_BYTES-1),d0 + bne 1f + btst ~(L1_CACHE_BYTES-1),d1 + beq 2f +1: + bra mn10300_local_dcache_flush_inv_range +2: +#endif /* CONFIG_MN10300_CACHE_WBACK */ + movm [d2,d3,a2],(sp) - mov CHCTR,a2 + mov CHCTR,a2 movhu (a2),d2 btst CHCTR_DCEN,d2 - beq mn10300_dcache_inv_range_end + beq mn10300_local_dcache_inv_range_end +#ifndef CONFIG_MN10300_CACHE_WBACK and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start # addr down - mov d0,a1 - add L1_CACHE_BYTES,d1 # round end addr up + add L1_CACHE_BYTES,d1 # round end addr up and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 +#endif /* !CONFIG_MN10300_CACHE_WBACK */ + mov d0,a1 - clr d2 # we're going to clear tag ram + clr d2 # we're going to clear tag RAM # entries # read the tags from the tag RAM, and if they indicate a valid dirty @@ -176,14 +237,8 @@ mn10300_dcache_inv_range: and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base -mn10300_dcache_inv_range_outer_loop: - # disable interrupts - mov epsw,d3 - and ~EPSW_IE,epsw - nop # note that reading CHCTR and - # AND'ing D0 occupy two delay - # slots after disabling - # interrupts +mn10300_local_dcache_inv_range_outer_loop: + LOCAL_CLI_SAVE(d3) # disable the dcache movhu (a2),d0 @@ -196,63 +251,63 @@ mn10300_dcache_inv_range_outer_loop: btst CHCTR_DCBUSY,d0 lne -mn10300_dcache_inv_range_loop: +mn10300_local_dcache_inv_range_loop: # process the way 0 slot mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot btst L1_CACHE_TAG_VALID,d0 - beq mn10300_dcache_inv_range_skip_0 # jump if this cacheline is not - # valid + beq mn10300_local_dcache_inv_range_skip_0 # jump if this cacheline + # is not valid xor a1,d0 lsr 12,d0 - bne mn10300_dcache_inv_range_skip_0 # jump if not this cacheline + bne mn10300_local_dcache_inv_range_skip_0 # jump if not this cacheline - mov d2,(a0) # kill the tag + mov d2,(L1_CACHE_WAYDISP*0,a0) # kill the tag -mn10300_dcache_inv_range_skip_0: +mn10300_local_dcache_inv_range_skip_0: # process the way 1 slot mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot btst L1_CACHE_TAG_VALID,d0 - beq mn10300_dcache_inv_range_skip_1 # jump if this cacheline is not - # valid + beq mn10300_local_dcache_inv_range_skip_1 # jump if this cacheline + # is not valid xor a1,d0 lsr 12,d0 - bne mn10300_dcache_inv_range_skip_1 # jump if not this cacheline + bne mn10300_local_dcache_inv_range_skip_1 # jump if not this cacheline - mov d2,(a0) # kill the tag + mov d2,(L1_CACHE_WAYDISP*1,a0) # kill the tag -mn10300_dcache_inv_range_skip_1: +mn10300_local_dcache_inv_range_skip_1: # process the way 2 slot mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot btst L1_CACHE_TAG_VALID,d0 - beq mn10300_dcache_inv_range_skip_2 # jump if this cacheline is not - # valid + beq mn10300_local_dcache_inv_range_skip_2 # jump if this cacheline + # is not valid xor a1,d0 lsr 12,d0 - bne mn10300_dcache_inv_range_skip_2 # jump if not this cacheline + bne mn10300_local_dcache_inv_range_skip_2 # jump if not this cacheline - mov d2,(a0) # kill the tag + mov d2,(L1_CACHE_WAYDISP*2,a0) # kill the tag -mn10300_dcache_inv_range_skip_2: +mn10300_local_dcache_inv_range_skip_2: # process the way 3 slot mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot btst L1_CACHE_TAG_VALID,d0 - beq mn10300_dcache_inv_range_skip_3 # jump if this cacheline is not - # valid + beq mn10300_local_dcache_inv_range_skip_3 # jump if this cacheline + # is not valid xor a1,d0 lsr 12,d0 - bne mn10300_dcache_inv_range_skip_3 # jump if not this cacheline + bne mn10300_local_dcache_inv_range_skip_3 # jump if not this cacheline - mov d2,(a0) # kill the tag + mov d2,(L1_CACHE_WAYDISP*3,a0) # kill the tag -mn10300_dcache_inv_range_skip_3: +mn10300_local_dcache_inv_range_skip_3: # approx every N steps we re-enable the cache and see if there are any # interrupts to be processed @@ -260,9 +315,10 @@ mn10300_dcache_inv_range_skip_3: # (the bottom nibble of the count is zero in both cases) add L1_CACHE_BYTES,a0 add L1_CACHE_BYTES,a1 + and ~L1_CACHE_WAYDISP,a0 add -1,d1 - btst mn10300_dcache_inv_range_intr_interval,d1 - bne mn10300_dcache_inv_range_loop + btst mn10300_local_dcache_inv_range_intr_interval,d1 + bne mn10300_local_dcache_inv_range_loop # wait for the cache to finish what it's doing setlb @@ -279,11 +335,14 @@ mn10300_dcache_inv_range_skip_3: # - we don't bother with delay NOPs as we'll have enough instructions # before we disable interrupts again to give the interrupts a chance # to happen - mov d3,epsw + LOCAL_IRQ_RESTORE(d3) # go around again if the counter hasn't yet reached zero add 0,d1 - bne mn10300_dcache_inv_range_outer_loop + bne mn10300_local_dcache_inv_range_outer_loop -mn10300_dcache_inv_range_end: +mn10300_local_dcache_inv_range_end: ret [d2,d3,a2],12 + .size mn10300_local_dcache_inv_page,.-mn10300_local_dcache_inv_page + .size mn10300_local_dcache_inv_range,.-mn10300_local_dcache_inv_range + .size mn10300_local_dcache_inv_range2,.-mn10300_local_dcache_inv_range2 diff --git a/arch/mn10300/proc-mn103e010/include/proc/cache.h b/arch/mn10300/proc-mn103e010/include/proc/cache.h index bdc1f9a59b4c..c1528004163c 100644 --- a/arch/mn10300/proc-mn103e010/include/proc/cache.h +++ b/arch/mn10300/proc-mn103e010/include/proc/cache.h @@ -30,4 +30,13 @@ */ #define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4 +/* + * The size of range at which it becomes more economical to just flush the + * whole cache rather than trying to flush the specified range. + */ +#define MN10300_DCACHE_FLUSH_BORDER \ + +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) +#define MN10300_DCACHE_FLUSH_INV_BORDER \ + +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) + #endif /* _ASM_PROC_CACHE_H */ -- cgit v1.2.3 From 9731d23710736b96786d68c2e63148ff3f22e6eb Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:45 +0100 Subject: MN10300: AM34: Add cacheflushing by using the AM34 purge registers The AM34 CPU core provides an automated way of purging the cache rather than manually iterating over all the tags in the cache. Make it possible to use these. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/mm/Kconfig.cache | 13 +- arch/mn10300/mm/Makefile | 2 + arch/mn10300/mm/cache-flush-by-reg.S | 308 ++++++++++++++++++++++++++++++ arch/mn10300/mm/cache-inv-by-reg.S | 356 +++++++++++++++++++++++++++++++++++ 4 files changed, 678 insertions(+), 1 deletion(-) create mode 100644 arch/mn10300/mm/cache-flush-by-reg.S create mode 100644 arch/mn10300/mm/cache-inv-by-reg.S (limited to 'arch/mn10300') diff --git a/arch/mn10300/mm/Kconfig.cache b/arch/mn10300/mm/Kconfig.cache index aa6ff0791138..97adc06e7128 100644 --- a/arch/mn10300/mm/Kconfig.cache +++ b/arch/mn10300/mm/Kconfig.cache @@ -37,7 +37,8 @@ config MN10300_CACHE_ENABLED choice prompt "CPU cache flush/invalidate method" - default MN10300_CACHE_MANAGE_BY_TAG + default MN10300_CACHE_MANAGE_BY_TAG if !AM34_2 + default MN10300_CACHE_MANAGE_BY_REG if AM34_2 depends on MN10300_CACHE_ENABLED help This determines the method by which CPU cache flushing and @@ -46,10 +47,20 @@ choice config MN10300_CACHE_MANAGE_BY_TAG bool "Use the cache tag registers directly" +config MN10300_CACHE_MANAGE_BY_REG + bool "Flush areas by way of automatic purge registers (AM34 only)" + depends on AM34_2 + endchoice config MN10300_CACHE_INV_BY_TAG def_bool y if MN10300_CACHE_MANAGE_BY_TAG && MN10300_CACHE_ENABLED +config MN10300_CACHE_INV_BY_REG + def_bool y if MN10300_CACHE_MANAGE_BY_REG && MN10300_CACHE_ENABLED + config MN10300_CACHE_FLUSH_BY_TAG def_bool y if MN10300_CACHE_MANAGE_BY_TAG && MN10300_CACHE_WBACK + +config MN10300_CACHE_FLUSH_BY_REG + def_bool y if MN10300_CACHE_MANAGE_BY_REG && MN10300_CACHE_WBACK diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile index dc4b9f0ea65c..7b997236ed20 100644 --- a/arch/mn10300/mm/Makefile +++ b/arch/mn10300/mm/Makefile @@ -4,7 +4,9 @@ cacheflush-y := cache.o cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_TAG) += cache-inv-by-tag.o +cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_REG) += cache-inv-by-reg.o cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_TAG) += cache-flush-by-tag.o +cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_REG) += cache-flush-by-reg.o cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o diff --git a/arch/mn10300/mm/cache-flush-by-reg.S b/arch/mn10300/mm/cache-flush-by-reg.S new file mode 100644 index 000000000000..1dcae0211671 --- /dev/null +++ b/arch/mn10300/mm/cache-flush-by-reg.S @@ -0,0 +1,308 @@ +/* MN10300 CPU core caching routines, using indirect regs on cache controller + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + + .am33_2 + +#ifndef CONFIG_SMP + .globl mn10300_dcache_flush + .globl mn10300_dcache_flush_page + .globl mn10300_dcache_flush_range + .globl mn10300_dcache_flush_range2 + .globl mn10300_dcache_flush_inv + .globl mn10300_dcache_flush_inv_page + .globl mn10300_dcache_flush_inv_range + .globl mn10300_dcache_flush_inv_range2 + +mn10300_dcache_flush = mn10300_local_dcache_flush +mn10300_dcache_flush_page = mn10300_local_dcache_flush_page +mn10300_dcache_flush_range = mn10300_local_dcache_flush_range +mn10300_dcache_flush_range2 = mn10300_local_dcache_flush_range2 +mn10300_dcache_flush_inv = mn10300_local_dcache_flush_inv +mn10300_dcache_flush_inv_page = mn10300_local_dcache_flush_inv_page +mn10300_dcache_flush_inv_range = mn10300_local_dcache_flush_inv_range +mn10300_dcache_flush_inv_range2 = mn10300_local_dcache_flush_inv_range2 + +#endif /* !CONFIG_SMP */ + +############################################################################### +# +# void mn10300_local_dcache_flush(void) +# Flush the entire data cache back to RAM +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_flush + .type mn10300_local_dcache_flush,@function +mn10300_local_dcache_flush: + movhu (CHCTR),d0 + btst CHCTR_DCEN,d0 + beq mn10300_local_dcache_flush_end + + mov DCPGCR,a0 + + LOCAL_CLI_SAVE(d1) + + # wait for busy bit of area purge + setlb + mov (a0),d0 + btst DCPGCR_DCPGBSY,d0 + lne + + # set mask + clr d0 + mov d0,(DCPGMR) + + # area purge + # + # DCPGCR = DCPGCR_DCP + # + mov DCPGCR_DCP,d0 + mov d0,(a0) + + # wait for busy bit of area purge + setlb + mov (a0),d0 + btst DCPGCR_DCPGBSY,d0 + lne + + LOCAL_IRQ_RESTORE(d1) + +mn10300_local_dcache_flush_end: + ret [],0 + .size mn10300_local_dcache_flush,.-mn10300_local_dcache_flush + +############################################################################### +# +# void mn10300_local_dcache_flush_page(unsigned long start) +# void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end) +# void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size) +# Flush a range of addresses on a page in the dcache +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_flush_page + .globl mn10300_local_dcache_flush_range + .globl mn10300_local_dcache_flush_range2 + .type mn10300_local_dcache_flush_page,@function + .type mn10300_local_dcache_flush_range,@function + .type mn10300_local_dcache_flush_range2,@function +mn10300_local_dcache_flush_page: + and ~(PAGE_SIZE-1),d0 + mov PAGE_SIZE,d1 +mn10300_local_dcache_flush_range2: + add d0,d1 +mn10300_local_dcache_flush_range: + movm [d2,d3,a2],(sp) + + movhu (CHCTR),d2 + btst CHCTR_DCEN,d2 + beq mn10300_local_dcache_flush_range_end + + # calculate alignsize + # + # alignsize = L1_CACHE_BYTES; + # for (i = (end - start - 1) / L1_CACHE_BYTES ; i > 0; i >>= 1) + # alignsize <<= 1; + # d2 = alignsize; + # + mov L1_CACHE_BYTES,d2 + sub d0,d1,d3 + add -1,d3 + lsr L1_CACHE_SHIFT,d3 + beq 2f +1: + add d2,d2 + lsr 1,d3 + bne 1b +2: + mov d1,a1 # a1 = end + + LOCAL_CLI_SAVE(d3) + mov DCPGCR,a0 + + # wait for busy bit of area purge + setlb + mov (a0),d1 + btst DCPGCR_DCPGBSY,d1 + lne + + # determine the mask + mov d2,d1 + add -1,d1 + not d1 # d1 = mask = ~(alignsize-1) + mov d1,(DCPGMR) + + and d1,d0,a2 # a2 = mask & start + +dcpgloop: + # area purge + mov a2,d0 + or DCPGCR_DCP,d0 + mov d0,(a0) # DCPGCR = (mask & start) | DCPGCR_DCP + + # wait for busy bit of area purge + setlb + mov (a0),d1 + btst DCPGCR_DCPGBSY,d1 + lne + + # check purge of end address + add d2,a2 # a2 += alignsize + cmp a1,a2 # if (a2 < end) goto dcpgloop + bns dcpgloop + + LOCAL_IRQ_RESTORE(d3) + +mn10300_local_dcache_flush_range_end: + ret [d2,d3,a2],12 + + .size mn10300_local_dcache_flush_page,.-mn10300_local_dcache_flush_page + .size mn10300_local_dcache_flush_range,.-mn10300_local_dcache_flush_range + .size mn10300_local_dcache_flush_range2,.-mn10300_local_dcache_flush_range2 + +############################################################################### +# +# void mn10300_local_dcache_flush_inv(void) +# Flush the entire data cache and invalidate all entries +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_flush_inv + .type mn10300_local_dcache_flush_inv,@function +mn10300_local_dcache_flush_inv: + movhu (CHCTR),d0 + btst CHCTR_DCEN,d0 + beq mn10300_local_dcache_flush_inv_end + + mov DCPGCR,a0 + + LOCAL_CLI_SAVE(d1) + + # wait for busy bit of area purge & invalidate + setlb + mov (a0),d0 + btst DCPGCR_DCPGBSY,d0 + lne + + # set the mask to cover everything + clr d0 + mov d0,(DCPGMR) + + # area purge & invalidate + mov DCPGCR_DCP|DCPGCR_DCI,d0 + mov d0,(a0) + + # wait for busy bit of area purge & invalidate + setlb + mov (a0),d0 + btst DCPGCR_DCPGBSY,d0 + lne + + LOCAL_IRQ_RESTORE(d1) + +mn10300_local_dcache_flush_inv_end: + ret [],0 + .size mn10300_local_dcache_flush_inv,.-mn10300_local_dcache_flush_inv + +############################################################################### +# +# void mn10300_local_dcache_flush_inv_page(unsigned long start) +# void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end) +# void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size) +# Flush and invalidate a range of addresses on a page in the dcache +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_flush_inv_page + .globl mn10300_local_dcache_flush_inv_range + .globl mn10300_local_dcache_flush_inv_range2 + .type mn10300_local_dcache_flush_inv_page,@function + .type mn10300_local_dcache_flush_inv_range,@function + .type mn10300_local_dcache_flush_inv_range2,@function +mn10300_local_dcache_flush_inv_page: + and ~(PAGE_SIZE-1),d0 + mov PAGE_SIZE,d1 +mn10300_local_dcache_flush_inv_range2: + add d0,d1 +mn10300_local_dcache_flush_inv_range: + movm [d2,d3,a2],(sp) + + movhu (CHCTR),d2 + btst CHCTR_DCEN,d2 + beq mn10300_local_dcache_flush_inv_range_end + + # calculate alignsize + # + # alignsize = L1_CACHE_BYTES; + # for (i = (end - start - 1) / L1_CACHE_BYTES; i > 0; i >>= 1) + # alignsize <<= 1; + # d2 = alignsize + # + mov L1_CACHE_BYTES,d2 + sub d0,d1,d3 + add -1,d3 + lsr L1_CACHE_SHIFT,d3 + beq 2f +1: + add d2,d2 + lsr 1,d3 + bne 1b +2: + mov d1,a1 # a1 = end + + LOCAL_CLI_SAVE(d3) + mov DCPGCR,a0 + + # wait for busy bit of area purge & invalidate + setlb + mov (a0),d1 + btst DCPGCR_DCPGBSY,d1 + lne + + # set the mask + mov d2,d1 + add -1,d1 + not d1 # d1 = mask = ~(alignsize-1) + mov d1,(DCPGMR) + + and d1,d0,a2 # a2 = mask & start + +dcpgivloop: + # area purge & invalidate + mov a2,d0 + or DCPGCR_DCP|DCPGCR_DCI,d0 + mov d0,(a0) # DCPGCR = (mask & start)|DCPGCR_DCP|DCPGCR_DCI + + # wait for busy bit of area purge & invalidate + setlb + mov (a0),d1 + btst DCPGCR_DCPGBSY,d1 + lne + + # check purge & invalidate of end address + add d2,a2 # a2 += alignsize + cmp a1,a2 # if (a2 < end) goto dcpgivloop + bns dcpgivloop + + LOCAL_IRQ_RESTORE(d3) + +mn10300_local_dcache_flush_inv_range_end: + ret [d2,d3,a2],12 + .size mn10300_local_dcache_flush_inv_page,.-mn10300_local_dcache_flush_inv_page + .size mn10300_local_dcache_flush_inv_range,.-mn10300_local_dcache_flush_inv_range + .size mn10300_local_dcache_flush_inv_range2,.-mn10300_local_dcache_flush_inv_range2 diff --git a/arch/mn10300/mm/cache-inv-by-reg.S b/arch/mn10300/mm/cache-inv-by-reg.S new file mode 100644 index 000000000000..c8950861ed77 --- /dev/null +++ b/arch/mn10300/mm/cache-inv-by-reg.S @@ -0,0 +1,356 @@ +/* MN10300 CPU cache invalidation routines, using automatic purge registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include + +#define mn10300_local_dcache_inv_range_intr_interval \ + +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1) + +#if mn10300_local_dcache_inv_range_intr_interval > 0xff +#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less +#endif + + .am33_2 + +#ifndef CONFIG_SMP + .globl mn10300_icache_inv + .globl mn10300_icache_inv_page + .globl mn10300_icache_inv_range + .globl mn10300_icache_inv_range2 + .globl mn10300_dcache_inv + .globl mn10300_dcache_inv_page + .globl mn10300_dcache_inv_range + .globl mn10300_dcache_inv_range2 + +mn10300_icache_inv = mn10300_local_icache_inv +mn10300_icache_inv_page = mn10300_local_icache_inv_page +mn10300_icache_inv_range = mn10300_local_icache_inv_range +mn10300_icache_inv_range2 = mn10300_local_icache_inv_range2 +mn10300_dcache_inv = mn10300_local_dcache_inv +mn10300_dcache_inv_page = mn10300_local_dcache_inv_page +mn10300_dcache_inv_range = mn10300_local_dcache_inv_range +mn10300_dcache_inv_range2 = mn10300_local_dcache_inv_range2 + +#endif /* !CONFIG_SMP */ + +############################################################################### +# +# void mn10300_local_icache_inv(void) +# Invalidate the entire icache +# +############################################################################### + ALIGN + .globl mn10300_local_icache_inv + .type mn10300_local_icache_inv,@function +mn10300_local_icache_inv: + mov CHCTR,a0 + + movhu (a0),d0 + btst CHCTR_ICEN,d0 + beq mn10300_local_icache_inv_end + + # invalidate + or CHCTR_ICINV,d0 + movhu d0,(a0) + movhu (a0),d0 + +mn10300_local_icache_inv_end: + ret [],0 + .size mn10300_local_icache_inv,.-mn10300_local_icache_inv + +############################################################################### +# +# void mn10300_local_dcache_inv(void) +# Invalidate the entire dcache +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_inv + .type mn10300_local_dcache_inv,@function +mn10300_local_dcache_inv: + mov CHCTR,a0 + + movhu (a0),d0 + btst CHCTR_DCEN,d0 + beq mn10300_local_dcache_inv_end + + # invalidate + or CHCTR_DCINV,d0 + movhu d0,(a0) + movhu (a0),d0 + +mn10300_local_dcache_inv_end: + ret [],0 + .size mn10300_local_dcache_inv,.-mn10300_local_dcache_inv + +############################################################################### +# +# void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end) +# void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size) +# void mn10300_local_dcache_inv_page(unsigned long start) +# Invalidate a range of addresses on a page in the dcache +# +############################################################################### + ALIGN + .globl mn10300_local_dcache_inv_page + .globl mn10300_local_dcache_inv_range + .globl mn10300_local_dcache_inv_range2 + .type mn10300_local_dcache_inv_page,@function + .type mn10300_local_dcache_inv_range,@function + .type mn10300_local_dcache_inv_range2,@function +mn10300_local_dcache_inv_page: + and ~(PAGE_SIZE-1),d0 + mov PAGE_SIZE,d1 +mn10300_local_dcache_inv_range2: + add d0,d1 +mn10300_local_dcache_inv_range: + # If we are in writeback mode we check the start and end alignments, + # and if they're not cacheline-aligned, we must flush any bits outside + # the range that share cachelines with stuff inside the range +#ifdef CONFIG_MN10300_CACHE_WBACK + btst ~(L1_CACHE_BYTES-1),d0 + bne 1f + btst ~(L1_CACHE_BYTES-1),d1 + beq 2f +1: + bra mn10300_local_dcache_flush_inv_range +2: +#endif /* CONFIG_MN10300_CACHE_WBACK */ + + movm [d2,d3,a2],(sp) + + mov CHCTR,a0 + movhu (a0),d2 + btst CHCTR_DCEN,d2 + beq mn10300_local_dcache_inv_range_end + + # round the addresses out to be full cachelines, unless we're in + # writeback mode, in which case we would be in flush and invalidate by + # now +#ifndef CONFIG_MN10300_CACHE_WBACK + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start + # addr down + + mov L1_CACHE_BYTES-1,d2 + add d2,d1 + and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 # round end addr up +#endif /* !CONFIG_MN10300_CACHE_WBACK */ + + sub d0,d1,d2 # calculate the total size + mov d0,a2 # A2 = start address + mov d1,a1 # A1 = end address + + LOCAL_CLI_SAVE(d3) + + mov DCPGCR,a0 # make sure the purger isn't busy + setlb + mov (a0),d0 + btst DCPGCR_DCPGBSY,d0 + lne + + # skip initial address alignment calculation if address is zero + mov d2,d1 + cmp 0,a2 + beq 1f + +dcivloop: + /* calculate alignsize + * + * alignsize = L1_CACHE_BYTES; + * while (! start & alignsize) { + * alignsize <<=1; + * } + * d1 = alignsize; + */ + mov L1_CACHE_BYTES,d1 + lsr 1,d1 + setlb + add d1,d1 + mov d1,d0 + and a2,d0 + leq + +1: + /* calculate invsize + * + * if (totalsize > alignsize) { + * invsize = alignsize; + * } else { + * invsize = totalsize; + * tmp = 0x80000000; + * while (! invsize & tmp) { + * tmp >>= 1; + * } + * invsize = tmp; + * } + * d1 = invsize + */ + cmp d2,d1 + bns 2f + mov d2,d1 + + mov 0x80000000,d0 # start from 31bit=1 + setlb + lsr 1,d0 + mov d0,e0 + and d1,e0 + leq + mov d0,d1 + +2: + /* set mask + * + * mask = ~(invsize-1); + * DCPGMR = mask; + */ + mov d1,d0 + add -1,d0 + not d0 + mov d0,(DCPGMR) + + # invalidate area + mov a2,d0 + or DCPGCR_DCI,d0 + mov d0,(a0) # DCPGCR = (mask & start) | DCPGCR_DCI + + setlb # wait for the purge to complete + mov (a0),d0 + btst DCPGCR_DCPGBSY,d0 + lne + + sub d1,d2 # decrease size remaining + add d1,a2 # increase next start address + + /* check invalidating of end address + * + * a2 = a2 + invsize + * if (a2 < end) { + * goto dcivloop; + * } */ + cmp a1,a2 + bns dcivloop + + LOCAL_IRQ_RESTORE(d3) + +mn10300_local_dcache_inv_range_end: + ret [d2,d3,a2],12 + .size mn10300_local_dcache_inv_page,.-mn10300_local_dcache_inv_page + .size mn10300_local_dcache_inv_range,.-mn10300_local_dcache_inv_range + .size mn10300_local_dcache_inv_range2,.-mn10300_local_dcache_inv_range2 + +############################################################################### +# +# void mn10300_local_icache_inv_page(unsigned long start) +# void mn10300_local_icache_inv_range2(unsigned long start, unsigned long size) +# void mn10300_local_icache_inv_range(unsigned long start, unsigned long end) +# Invalidate a range of addresses on a page in the icache +# +############################################################################### + ALIGN + .globl mn10300_local_icache_inv_page + .globl mn10300_local_icache_inv_range + .globl mn10300_local_icache_inv_range2 + .type mn10300_local_icache_inv_page,@function + .type mn10300_local_icache_inv_range,@function + .type mn10300_local_icache_inv_range2,@function +mn10300_local_icache_inv_page: + and ~(PAGE_SIZE-1),d0 + mov PAGE_SIZE,d1 +mn10300_local_icache_inv_range2: + add d0,d1 +mn10300_local_icache_inv_range: + movm [d2,d3,a2],(sp) + + mov CHCTR,a0 + movhu (a0),d2 + btst CHCTR_ICEN,d2 + beq mn10300_local_icache_inv_range_reg_end + + /* calculate alignsize + * + * alignsize = L1_CACHE_BYTES; + * for (i = (end - start - 1) / L1_CACHE_BYTES ; i > 0; i >>= 1) { + * alignsize <<= 1; + * } + * d2 = alignsize; + */ + mov L1_CACHE_BYTES,d2 + sub d0,d1,d3 + add -1,d3 + lsr L1_CACHE_SHIFT,d3 + beq 2f +1: + add d2,d2 + lsr 1,d3 + bne 1b +2: + + /* a1 = end */ + mov d1,a1 + + LOCAL_CLI_SAVE(d3) + + mov ICIVCR,a0 + /* wait for busy bit of area invalidation */ + setlb + mov (a0),d1 + btst ICIVCR_ICIVBSY,d1 + lne + + /* set mask + * + * mask = ~(alignsize-1); + * ICIVMR = mask; + */ + mov d2,d1 + add -1,d1 + not d1 + mov d1,(ICIVMR) + /* a2 = mask & start */ + and d1,d0,a2 + +icivloop: + /* area invalidate + * + * ICIVCR = (mask & start) | ICIVCR_ICI + */ + mov a2,d0 + or ICIVCR_ICI,d0 + mov d0,(a0) + + /* wait for busy bit of area invalidation */ + setlb + mov (a0),d1 + btst ICIVCR_ICIVBSY,d1 + lne + + /* check invalidating of end address + * + * a2 = a2 + alignsize + * if (a2 < end) { + * goto icivloop; + * } */ + add d2,a2 + cmp a1,a2 + bns icivloop + + LOCAL_IRQ_RESTORE(d3) + +mn10300_local_icache_inv_range_reg_end: + ret [d2,d3,a2],12 + .size mn10300_local_icache_inv_page,.-mn10300_local_icache_inv_page + .size mn10300_local_icache_inv_range,.-mn10300_local_icache_inv_range + .size mn10300_local_icache_inv_range2,.-mn10300_local_icache_inv_range2 -- cgit v1.2.3 From b478491f2628114b2eae76587f22ce3789b66012 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Oct 2010 17:28:46 +0100 Subject: MN10300: Allow some cacheflushes to be avoided if cache snooping is available The AM34 core is able to do cache snooping, and so can skip some of the cache flushing. Signed-off-by: David Howells --- arch/mn10300/Kconfig | 1 + arch/mn10300/include/asm/cacheflush.h | 16 ++-- arch/mn10300/kernel/kprobes.c | 4 + arch/mn10300/kernel/traps.c | 2 + arch/mn10300/mm/Kconfig.cache | 34 +++++++++ arch/mn10300/mm/Makefile | 2 + arch/mn10300/mm/cache-flush-icache.c | 137 ++++++++++++++++++++++++++++++++++ arch/mn10300/mm/cache-inv-icache.c | 119 +++++++++++++++++++++++++++++ arch/mn10300/mm/cache.c | 90 ---------------------- 9 files changed, 309 insertions(+), 96 deletions(-) create mode 100644 arch/mn10300/mm/cache-flush-icache.c create mode 100644 arch/mn10300/mm/cache-inv-icache.c (limited to 'arch/mn10300') diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 069e34d4c4ac..21e2a534d98e 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -18,6 +18,7 @@ config AM33_3 config AM34_2 def_bool n select MN10300_HAS_ATOMIC_OPS_UNIT + select MN10300_HAS_CACHE_SNOOP config MMU def_bool y diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h index 748143f65418..faed90240ded 100644 --- a/arch/mn10300/include/asm/cacheflush.h +++ b/arch/mn10300/include/asm/cacheflush.h @@ -131,18 +131,22 @@ extern void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long s /* * Physically-indexed cache management */ -#ifdef CONFIG_MN10300_CACHE_ENABLED - +#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) +extern void flush_icache_page(struct vm_area_struct *vma, struct page *page); +extern void flush_icache_range(unsigned long start, unsigned long end); +#elif defined(CONFIG_MN10300_CACHE_INV_ICACHE) +static inline void flush_icache_page(struct vm_area_struct *vma, + struct page *page) +{ + mn10300_icache_inv_page(page_to_phys(page)); +} extern void flush_icache_range(unsigned long start, unsigned long end); -extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg); - #else - #define flush_icache_range(start, end) do {} while (0) #define flush_icache_page(vma, pg) do {} while (0) - #endif + #define flush_icache_user_range(vma, pg, adr, len) \ flush_icache_range(adr, adr + len) diff --git a/arch/mn10300/kernel/kprobes.c b/arch/mn10300/kernel/kprobes.c index 67e6389d625a..0311a7fcea16 100644 --- a/arch/mn10300/kernel/kprobes.c +++ b/arch/mn10300/kernel/kprobes.c @@ -377,8 +377,10 @@ void __kprobes arch_arm_kprobe(struct kprobe *p) void __kprobes arch_disarm_kprobe(struct kprobe *p) { +#ifndef CONFIG_MN10300_CACHE_SNOOP mn10300_dcache_flush(); mn10300_icache_inv(); +#endif } void arch_remove_kprobe(struct kprobe *p) @@ -390,8 +392,10 @@ void __kprobes disarm_kprobe(struct kprobe *p, struct pt_regs *regs) { *p->addr = p->opcode; regs->pc = (unsigned long) p->addr; +#ifndef CONFIG_MN10300_CACHE_SNOOP mn10300_dcache_flush(); mn10300_icache_inv(); +#endif } static inline diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index a64604b512d5..c7257a1304a9 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -533,8 +533,10 @@ void __init set_intr_stub(enum exception_code code, void *handler) vector[6] = 0xcb; vector[7] = 0xcb; +#ifndef CONFIG_MN10300_CACHE_SNOOP mn10300_dcache_flush_inv(); mn10300_icache_inv(); +#endif } /* diff --git a/arch/mn10300/mm/Kconfig.cache b/arch/mn10300/mm/Kconfig.cache index 97adc06e7128..653254a34f88 100644 --- a/arch/mn10300/mm/Kconfig.cache +++ b/arch/mn10300/mm/Kconfig.cache @@ -22,12 +22,26 @@ choice config MN10300_CACHE_WBACK bool "Write-Back" + help + The dcache operates in delayed write-back mode. It must be manually + flushed if writes are made that subsequently need to be executed or + to be DMA'd by a device. config MN10300_CACHE_WTHRU bool "Write-Through" + help + The dcache operates in immediate write-through mode. Writes are + committed to RAM immediately in addition to being stored in the + cache. This means that the written data is immediately available for + execution or DMA. + + This is not available for use with an SMP kernel if cache flushing + and invalidation by automatic purge register is not selected. config MN10300_CACHE_DISABLED bool "Disabled" + help + The icache and dcache are disabled. endchoice @@ -64,3 +78,23 @@ config MN10300_CACHE_FLUSH_BY_TAG config MN10300_CACHE_FLUSH_BY_REG def_bool y if MN10300_CACHE_MANAGE_BY_REG && MN10300_CACHE_WBACK + + +config MN10300_HAS_CACHE_SNOOP + def_bool n + +config MN10300_CACHE_SNOOP + bool "Use CPU Cache Snooping" + depends on MN10300_CACHE_ENABLED && MN10300_HAS_CACHE_SNOOP + default y + +config MN10300_CACHE_FLUSH_ICACHE + def_bool y if MN10300_CACHE_WBACK && !MN10300_CACHE_SNOOP + help + Set if we need the dcache flushing before the icache is invalidated. + +config MN10300_CACHE_INV_ICACHE + def_bool y if MN10300_CACHE_WTHRU && !MN10300_CACHE_SNOOP + help + Set if we need the icache to be invalidated, even if the dcache is in + write-through mode and doesn't need flushing. diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile index 7b997236ed20..56c5af83151b 100644 --- a/arch/mn10300/mm/Makefile +++ b/arch/mn10300/mm/Makefile @@ -3,6 +3,8 @@ # cacheflush-y := cache.o +cacheflush-$(CONFIG_MN10300_CACHE_INV_ICACHE) += cache-inv-icache.o +cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_ICACHE) += cache-flush-icache.o cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_TAG) += cache-inv-by-tag.o cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_REG) += cache-inv-by-reg.o cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_TAG) += cache-flush-by-tag.o diff --git a/arch/mn10300/mm/cache-flush-icache.c b/arch/mn10300/mm/cache-flush-icache.c new file mode 100644 index 000000000000..0e471e1cb2da --- /dev/null +++ b/arch/mn10300/mm/cache-flush-icache.c @@ -0,0 +1,137 @@ +/* Flush dcache and invalidate icache when the dcache is in writeback mode + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +/** + * flush_icache_page - Flush a page from the dcache and invalidate the icache + * @vma: The VMA the page is part of. + * @page: The page to be flushed. + * + * Write a page back from the dcache and invalidate the icache so that we can + * run code from it that we've just written into it + */ +void flush_icache_page(struct vm_area_struct *vma, struct page *page) +{ + unsigned long start = page_to_phys(page); + + mn10300_dcache_flush_page(start); + mn10300_icache_inv_page(start); +} +EXPORT_SYMBOL(flush_icache_page); + +/** + * flush_icache_page_range - Flush dcache and invalidate icache for part of a + * single page + * @start: The starting virtual address of the page part. + * @end: The ending virtual address of the page part. + * + * Flush the dcache and invalidate the icache for part of a single page, as + * determined by the virtual addresses given. The page must be in the paged + * area. + */ +static void flush_icache_page_range(unsigned long start, unsigned long end) +{ + unsigned long addr, size, off; + struct page *page; + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *ppte, pte; + + /* work out how much of the page to flush */ + off = start & ~PAGE_MASK; + size = end - start; + + /* get the physical address the page is mapped to from the page + * tables */ + pgd = pgd_offset(current->mm, start); + if (!pgd || !pgd_val(*pgd)) + return; + + pud = pud_offset(pgd, start); + if (!pud || !pud_val(*pud)) + return; + + pmd = pmd_offset(pud, start); + if (!pmd || !pmd_val(*pmd)) + return; + + ppte = pte_offset_map(pmd, start); + if (!ppte) + return; + pte = *ppte; + pte_unmap(ppte); + + if (pte_none(pte)) + return; + + page = pte_page(pte); + if (!page) + return; + + addr = page_to_phys(page); + + /* flush the dcache and invalidate the icache coverage on that + * region */ + mn10300_dcache_flush_range2(addr + off, size); + mn10300_icache_inv_range2(addr + off, size); +} + +/** + * flush_icache_range - Globally flush dcache and invalidate icache for region + * @start: The starting virtual address of the region. + * @end: The ending virtual address of the region. + * + * This is used by the kernel to globally flush some code it has just written + * from the dcache back to RAM and then to globally invalidate the icache over + * that region so that that code can be run on all CPUs in the system. + */ +void flush_icache_range(unsigned long start, unsigned long end) +{ + unsigned long start_page, end_page; + + if (end > 0x80000000UL) { + /* addresses above 0xa0000000 do not go through the cache */ + if (end > 0xa0000000UL) { + end = 0xa0000000UL; + if (start >= end) + return; + } + + /* kernel addresses between 0x80000000 and 0x9fffffff do not + * require page tables, so we just map such addresses + * directly */ + start_page = (start >= 0x80000000UL) ? start : 0x80000000UL; + mn10300_dcache_flush_range(start_page, end); + mn10300_icache_inv_range(start_page, end); + if (start_page == start) + return; + end = start_page; + } + + start_page = start & PAGE_MASK; + end_page = end & PAGE_MASK; + + if (start_page == end_page) { + /* the first and last bytes are on the same page */ + flush_icache_page_range(start, end); + } else if (start_page + 1 == end_page) { + /* split over two virtually contiguous pages */ + flush_icache_page_range(start, end_page); + flush_icache_page_range(end_page, end); + } else { + /* more than 2 pages; just flush the entire cache */ + mn10300_dcache_flush(); + mn10300_icache_inv(); + } +} +EXPORT_SYMBOL(flush_icache_range); diff --git a/arch/mn10300/mm/cache-inv-icache.c b/arch/mn10300/mm/cache-inv-icache.c new file mode 100644 index 000000000000..4a3f7afcfe53 --- /dev/null +++ b/arch/mn10300/mm/cache-inv-icache.c @@ -0,0 +1,119 @@ +/* Invalidate icache when dcache doesn't need invalidation as it's in + * write-through mode + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include + +/** + * flush_icache_page_range - Flush dcache and invalidate icache for part of a + * single page + * @start: The starting virtual address of the page part. + * @end: The ending virtual address of the page part. + * + * Invalidate the icache for part of a single page, as determined by the + * virtual addresses given. The page must be in the paged area. The dcache is + * not flushed as the cache must be in write-through mode to get here. + */ +static void flush_icache_page_range(unsigned long start, unsigned long end) +{ + unsigned long addr, size, off; + struct page *page; + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *ppte, pte; + + /* work out how much of the page to flush */ + off = start & ~PAGE_MASK; + size = end - start; + + /* get the physical address the page is mapped to from the page + * tables */ + pgd = pgd_offset(current->mm, start); + if (!pgd || !pgd_val(*pgd)) + return; + + pud = pud_offset(pgd, start); + if (!pud || !pud_val(*pud)) + return; + + pmd = pmd_offset(pud, start); + if (!pmd || !pmd_val(*pmd)) + return; + + ppte = pte_offset_map(pmd, start); + if (!ppte) + return; + pte = *ppte; + pte_unmap(ppte); + + if (pte_none(pte)) + return; + + page = pte_page(pte); + if (!page) + return; + + addr = page_to_phys(page); + + /* invalidate the icache coverage on that region */ + mn10300_icache_inv_range2(addr + off, size); +} + +/** + * flush_icache_range - Globally flush dcache and invalidate icache for region + * @start: The starting virtual address of the region. + * @end: The ending virtual address of the region. + * + * This is used by the kernel to globally flush some code it has just written + * from the dcache back to RAM and then to globally invalidate the icache over + * that region so that that code can be run on all CPUs in the system. + */ +void flush_icache_range(unsigned long start, unsigned long end) +{ + unsigned long start_page, end_page; + + if (end > 0x80000000UL) { + /* addresses above 0xa0000000 do not go through the cache */ + if (end > 0xa0000000UL) { + end = 0xa0000000UL; + if (start >= end) + return; + } + + /* kernel addresses between 0x80000000 and 0x9fffffff do not + * require page tables, so we just map such addresses + * directly */ + start_page = (start >= 0x80000000UL) ? start : 0x80000000UL; + mn10300_dcache_flush_range(start_page, end); + mn10300_icache_inv_range(start_page, end); + if (start_page == start) + return; + end = start_page; + } + + start_page = start & PAGE_MASK; + end_page = end & PAGE_MASK; + + if (start_page == end_page) { + /* the first and last bytes are on the same page */ + flush_icache_page_range(start, end); + } else if (start_page + 1 == end_page) { + /* split over two virtually contiguous pages */ + flush_icache_page_range(start, end_page); + flush_icache_page_range(end_page, end); + } else { + /* more than 2 pages; just flush the entire cache */ + mn10300_icache_inv(); + } +} +EXPORT_SYMBOL(flush_icache_range); diff --git a/arch/mn10300/mm/cache.c b/arch/mn10300/mm/cache.c index 9261217e8d2c..bc35826f1357 100644 --- a/arch/mn10300/mm/cache.c +++ b/arch/mn10300/mm/cache.c @@ -36,96 +36,6 @@ EXPORT_SYMBOL(mn10300_dcache_flush_range2); EXPORT_SYMBOL(mn10300_dcache_flush_page); #endif -/* - * write a page back from the dcache and invalidate the icache so that we can - * run code from it that we've just written into it - */ -void flush_icache_page(struct vm_area_struct *vma, struct page *page) -{ - mn10300_dcache_flush_page(page_to_phys(page)); - mn10300_icache_inv(); -} -EXPORT_SYMBOL(flush_icache_page); - -/* - * write some code we've just written back from the dcache and invalidate the - * icache so that we can run that code - */ -void flush_icache_range(unsigned long start, unsigned long end) -{ -#ifdef CONFIG_MN10300_CACHE_WBACK - unsigned long addr, size, base, off; - struct page *page; - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *ppte, pte; - - if (end > 0x80000000UL) { - /* addresses above 0xa0000000 do not go through the cache */ - if (end > 0xa0000000UL) { - end = 0xa0000000UL; - if (start >= end) - return; - } - - /* kernel addresses between 0x80000000 and 0x9fffffff do not - * require page tables, so we just map such addresses directly */ - base = (start >= 0x80000000UL) ? start : 0x80000000UL; - mn10300_dcache_flush_range(base, end); - if (base == start) - goto invalidate; - end = base; - } - - for (; start < end; start += size) { - /* work out how much of the page to flush */ - off = start & (PAGE_SIZE - 1); - - size = end - start; - if (size > PAGE_SIZE - off) - size = PAGE_SIZE - off; - - /* get the physical address the page is mapped to from the page - * tables */ - pgd = pgd_offset(current->mm, start); - if (!pgd || !pgd_val(*pgd)) - continue; - - pud = pud_offset(pgd, start); - if (!pud || !pud_val(*pud)) - continue; - - pmd = pmd_offset(pud, start); - if (!pmd || !pmd_val(*pmd)) - continue; - - ppte = pte_offset_map(pmd, start); - if (!ppte) - continue; - pte = *ppte; - pte_unmap(ppte); - - if (pte_none(pte)) - continue; - - page = pte_page(pte); - if (!page) - continue; - - addr = page_to_phys(page); - - /* flush the dcache and invalidate the icache coverage on that - * region */ - mn10300_dcache_flush_range2(addr + off, size); - } -#endif - -invalidate: - mn10300_icache_inv(); -} -EXPORT_SYMBOL(flush_icache_range); - /* * allow userspace to flush the instruction cache */ -- cgit v1.2.3 From 8be062892365b09f41d64cda7fa63d306e95e0c9 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:47 +0100 Subject: MN10300: Cache: Implement SMP global cache flushing Implement SMP global cache flushing for MN10300. This will be used by the AM34 which is SMP capable. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/mm/Kconfig.cache | 1 + arch/mn10300/mm/Makefile | 3 + arch/mn10300/mm/cache-flush-icache.c | 36 ++++++-- arch/mn10300/mm/cache-inv-icache.c | 22 +++-- arch/mn10300/mm/cache-smp-flush.c | 156 +++++++++++++++++++++++++++++++++++ arch/mn10300/mm/cache-smp-inv.c | 153 ++++++++++++++++++++++++++++++++++ arch/mn10300/mm/cache-smp.c | 105 +++++++++++++++++++++++ arch/mn10300/mm/cache-smp.h | 69 ++++++++++++++++ arch/mn10300/mm/cache.c | 5 ++ 9 files changed, 535 insertions(+), 15 deletions(-) create mode 100644 arch/mn10300/mm/cache-smp-flush.c create mode 100644 arch/mn10300/mm/cache-smp-inv.c create mode 100644 arch/mn10300/mm/cache-smp.c create mode 100644 arch/mn10300/mm/cache-smp.h (limited to 'arch/mn10300') diff --git a/arch/mn10300/mm/Kconfig.cache b/arch/mn10300/mm/Kconfig.cache index 653254a34f88..c4fd923a55a0 100644 --- a/arch/mn10300/mm/Kconfig.cache +++ b/arch/mn10300/mm/Kconfig.cache @@ -60,6 +60,7 @@ choice config MN10300_CACHE_MANAGE_BY_TAG bool "Use the cache tag registers directly" + depends on !(SMP && MN10300_CACHE_WTHRU) config MN10300_CACHE_MANAGE_BY_REG bool "Flush areas by way of automatic purge registers (AM34 only)" diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile index 56c5af83151b..184745f94c32 100644 --- a/arch/mn10300/mm/Makefile +++ b/arch/mn10300/mm/Makefile @@ -2,7 +2,10 @@ # Makefile for the MN10300-specific memory management code # +cache-smp-wback-$(CONFIG_MN10300_CACHE_WBACK) := cache-smp-flush.o + cacheflush-y := cache.o +cacheflush-$(CONFIG_SMP) += cache-smp.o cache-smp-inv.o $(cache-smp-wback-y) cacheflush-$(CONFIG_MN10300_CACHE_INV_ICACHE) += cache-inv-icache.o cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_ICACHE) += cache-flush-icache.o cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_TAG) += cache-inv-by-tag.o diff --git a/arch/mn10300/mm/cache-flush-icache.c b/arch/mn10300/mm/cache-flush-icache.c index 0e471e1cb2da..fdb1a9db20f0 100644 --- a/arch/mn10300/mm/cache-flush-icache.c +++ b/arch/mn10300/mm/cache-flush-icache.c @@ -11,6 +11,9 @@ #include #include #include +#include +#include "cache-smp.h" + /** * flush_icache_page - Flush a page from the dcache and invalidate the icache * @vma: The VMA the page is part of. @@ -22,9 +25,15 @@ void flush_icache_page(struct vm_area_struct *vma, struct page *page) { unsigned long start = page_to_phys(page); + unsigned long flags; + + flags = smp_lock_cache(); + + mn10300_local_dcache_flush_page(start); + mn10300_local_icache_inv_page(start); - mn10300_dcache_flush_page(start); - mn10300_icache_inv_page(start); + smp_cache_call(SMP_IDCACHE_INV_FLUSH_RANGE, start, start + PAGE_SIZE); + smp_unlock_cache(flags); } EXPORT_SYMBOL(flush_icache_page); @@ -82,8 +91,9 @@ static void flush_icache_page_range(unsigned long start, unsigned long end) /* flush the dcache and invalidate the icache coverage on that * region */ - mn10300_dcache_flush_range2(addr + off, size); - mn10300_icache_inv_range2(addr + off, size); + mn10300_local_dcache_flush_range2(addr + off, size); + mn10300_local_icache_inv_range2(addr + off, size); + smp_cache_call(SMP_IDCACHE_INV_FLUSH_RANGE, start, end); } /** @@ -98,28 +108,32 @@ static void flush_icache_page_range(unsigned long start, unsigned long end) void flush_icache_range(unsigned long start, unsigned long end) { unsigned long start_page, end_page; + unsigned long flags; + + flags = smp_lock_cache(); if (end > 0x80000000UL) { /* addresses above 0xa0000000 do not go through the cache */ if (end > 0xa0000000UL) { end = 0xa0000000UL; if (start >= end) - return; + goto done; } /* kernel addresses between 0x80000000 and 0x9fffffff do not * require page tables, so we just map such addresses * directly */ start_page = (start >= 0x80000000UL) ? start : 0x80000000UL; - mn10300_dcache_flush_range(start_page, end); - mn10300_icache_inv_range(start_page, end); + mn10300_local_dcache_flush_range(start_page, end); + mn10300_local_icache_inv_range(start_page, end); + smp_cache_call(SMP_IDCACHE_INV_FLUSH_RANGE, start_page, end); if (start_page == start) - return; + goto done; end = start_page; } start_page = start & PAGE_MASK; - end_page = end & PAGE_MASK; + end_page = (end - 1) & PAGE_MASK; if (start_page == end_page) { /* the first and last bytes are on the same page */ @@ -132,6 +146,10 @@ void flush_icache_range(unsigned long start, unsigned long end) /* more than 2 pages; just flush the entire cache */ mn10300_dcache_flush(); mn10300_icache_inv(); + smp_cache_call(SMP_IDCACHE_INV_FLUSH, 0, 0); } + +done: + smp_unlock_cache(flags); } EXPORT_SYMBOL(flush_icache_range); diff --git a/arch/mn10300/mm/cache-inv-icache.c b/arch/mn10300/mm/cache-inv-icache.c index 4a3f7afcfe53..a8933a60b2d4 100644 --- a/arch/mn10300/mm/cache-inv-icache.c +++ b/arch/mn10300/mm/cache-inv-icache.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include "cache-smp.h" /** * flush_icache_page_range - Flush dcache and invalidate icache for part of a @@ -66,7 +68,8 @@ static void flush_icache_page_range(unsigned long start, unsigned long end) addr = page_to_phys(page); /* invalidate the icache coverage on that region */ - mn10300_icache_inv_range2(addr + off, size); + mn10300_local_icache_inv_range2(addr + off, size); + smp_cache_call(SMP_ICACHE_INV_FLUSH_RANGE, start, end); } /** @@ -81,28 +84,31 @@ static void flush_icache_page_range(unsigned long start, unsigned long end) void flush_icache_range(unsigned long start, unsigned long end) { unsigned long start_page, end_page; + unsigned long flags; + + flags = smp_lock_cache(); if (end > 0x80000000UL) { /* addresses above 0xa0000000 do not go through the cache */ if (end > 0xa0000000UL) { end = 0xa0000000UL; if (start >= end) - return; + goto done; } /* kernel addresses between 0x80000000 and 0x9fffffff do not * require page tables, so we just map such addresses * directly */ start_page = (start >= 0x80000000UL) ? start : 0x80000000UL; - mn10300_dcache_flush_range(start_page, end); mn10300_icache_inv_range(start_page, end); + smp_cache_call(SMP_ICACHE_INV_FLUSH_RANGE, start, end); if (start_page == start) - return; + goto done; end = start_page; } start_page = start & PAGE_MASK; - end_page = end & PAGE_MASK; + end_page = (end - 1) & PAGE_MASK; if (start_page == end_page) { /* the first and last bytes are on the same page */ @@ -113,7 +119,11 @@ void flush_icache_range(unsigned long start, unsigned long end) flush_icache_page_range(end_page, end); } else { /* more than 2 pages; just flush the entire cache */ - mn10300_icache_inv(); + mn10300_local_icache_inv(); + smp_cache_call(SMP_ICACHE_INV, 0, 0); } + +done: + smp_unlock_cache(flags); } EXPORT_SYMBOL(flush_icache_range); diff --git a/arch/mn10300/mm/cache-smp-flush.c b/arch/mn10300/mm/cache-smp-flush.c new file mode 100644 index 000000000000..fd51af5eaf70 --- /dev/null +++ b/arch/mn10300/mm/cache-smp-flush.c @@ -0,0 +1,156 @@ +/* Functions for global dcache flush when writeback caching in SMP + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include "cache-smp.h" + +/** + * mn10300_dcache_flush - Globally flush data cache + * + * Flush the data cache on all CPUs. + */ +void mn10300_dcache_flush(void) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_flush(); + smp_cache_call(SMP_DCACHE_FLUSH, 0, 0); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_page - Globally flush a page of data cache + * @start: The address of the page of memory to be flushed. + * + * Flush a range of addresses in the data cache on all CPUs covering + * the page that includes the given address. + */ +void mn10300_dcache_flush_page(unsigned long start) +{ + unsigned long flags; + + start &= ~(PAGE_SIZE-1); + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_page(start); + smp_cache_call(SMP_DCACHE_FLUSH_RANGE, start, start + PAGE_SIZE); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_range - Globally flush range of data cache + * @start: The start address of the region to be flushed. + * @end: The end address of the region to be flushed. + * + * Flush a range of addresses in the data cache on all CPUs, between start and + * end-1 inclusive. + */ +void mn10300_dcache_flush_range(unsigned long start, unsigned long end) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_range(start, end); + smp_cache_call(SMP_DCACHE_FLUSH_RANGE, start, end); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_range2 - Globally flush range of data cache + * @start: The start address of the region to be flushed. + * @size: The size of the region to be flushed. + * + * Flush a range of addresses in the data cache on all CPUs, between start and + * start+size-1 inclusive. + */ +void mn10300_dcache_flush_range2(unsigned long start, unsigned long size) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_range2(start, size); + smp_cache_call(SMP_DCACHE_FLUSH_RANGE, start, start + size); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_inv - Globally flush and invalidate data cache + * + * Flush and invalidate the data cache on all CPUs. + */ +void mn10300_dcache_flush_inv(void) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_inv(); + smp_cache_call(SMP_DCACHE_FLUSH_INV, 0, 0); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_inv_page - Globally flush and invalidate a page of data + * cache + * @start: The address of the page of memory to be flushed and invalidated. + * + * Flush and invalidate a range of addresses in the data cache on all CPUs + * covering the page that includes the given address. + */ +void mn10300_dcache_flush_inv_page(unsigned long start) +{ + unsigned long flags; + + start &= ~(PAGE_SIZE-1); + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_inv_page(start); + smp_cache_call(SMP_DCACHE_FLUSH_INV_RANGE, start, start + PAGE_SIZE); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_inv_range - Globally flush and invalidate range of data + * cache + * @start: The start address of the region to be flushed and invalidated. + * @end: The end address of the region to be flushed and invalidated. + * + * Flush and invalidate a range of addresses in the data cache on all CPUs, + * between start and end-1 inclusive. + */ +void mn10300_dcache_flush_inv_range(unsigned long start, unsigned long end) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_inv_range(start, end); + smp_cache_call(SMP_DCACHE_FLUSH_INV_RANGE, start, end); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_flush_inv_range2 - Globally flush and invalidate range of data + * cache + * @start: The start address of the region to be flushed and invalidated. + * @size: The size of the region to be flushed and invalidated. + * + * Flush and invalidate a range of addresses in the data cache on all CPUs, + * between start and start+size-1 inclusive. + */ +void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long size) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_flush_inv_range2(start, size); + smp_cache_call(SMP_DCACHE_FLUSH_INV_RANGE, start, start + size); + smp_unlock_cache(flags); +} diff --git a/arch/mn10300/mm/cache-smp-inv.c b/arch/mn10300/mm/cache-smp-inv.c new file mode 100644 index 000000000000..ff1787358c8e --- /dev/null +++ b/arch/mn10300/mm/cache-smp-inv.c @@ -0,0 +1,153 @@ +/* Functions for global i/dcache invalidation when caching in SMP + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include "cache-smp.h" + +/** + * mn10300_icache_inv - Globally invalidate instruction cache + * + * Invalidate the instruction cache on all CPUs. + */ +void mn10300_icache_inv(void) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_icache_inv(); + smp_cache_call(SMP_ICACHE_INV, 0, 0); + smp_unlock_cache(flags); +} + +/** + * mn10300_icache_inv_page - Globally invalidate a page of instruction cache + * @start: The address of the page of memory to be invalidated. + * + * Invalidate a range of addresses in the instruction cache on all CPUs + * covering the page that includes the given address. + */ +void mn10300_icache_inv_page(unsigned long start) +{ + unsigned long flags; + + start &= ~(PAGE_SIZE-1); + + flags = smp_lock_cache(); + mn10300_local_icache_inv_page(start); + smp_cache_call(SMP_ICACHE_INV_RANGE, start, start + PAGE_SIZE); + smp_unlock_cache(flags); +} + +/** + * mn10300_icache_inv_range - Globally invalidate range of instruction cache + * @start: The start address of the region to be invalidated. + * @end: The end address of the region to be invalidated. + * + * Invalidate a range of addresses in the instruction cache on all CPUs, + * between start and end-1 inclusive. + */ +void mn10300_icache_inv_range(unsigned long start, unsigned long end) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_icache_inv_range(start, end); + smp_cache_call(SMP_ICACHE_INV_RANGE, start, end); + smp_unlock_cache(flags); +} + +/** + * mn10300_icache_inv_range2 - Globally invalidate range of instruction cache + * @start: The start address of the region to be invalidated. + * @size: The size of the region to be invalidated. + * + * Invalidate a range of addresses in the instruction cache on all CPUs, + * between start and start+size-1 inclusive. + */ +void mn10300_icache_inv_range2(unsigned long start, unsigned long size) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_icache_inv_range2(start, size); + smp_cache_call(SMP_ICACHE_INV_RANGE, start, start + size); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_inv - Globally invalidate data cache + * + * Invalidate the data cache on all CPUs. + */ +void mn10300_dcache_inv(void) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_inv(); + smp_cache_call(SMP_DCACHE_INV, 0, 0); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_inv_page - Globally invalidate a page of data cache + * @start: The address of the page of memory to be invalidated. + * + * Invalidate a range of addresses in the data cache on all CPUs covering the + * page that includes the given address. + */ +void mn10300_dcache_inv_page(unsigned long start) +{ + unsigned long flags; + + start &= ~(PAGE_SIZE-1); + + flags = smp_lock_cache(); + mn10300_local_dcache_inv_page(start); + smp_cache_call(SMP_DCACHE_INV_RANGE, start, start + PAGE_SIZE); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_inv_range - Globally invalidate range of data cache + * @start: The start address of the region to be invalidated. + * @end: The end address of the region to be invalidated. + * + * Invalidate a range of addresses in the data cache on all CPUs, between start + * and end-1 inclusive. + */ +void mn10300_dcache_inv_range(unsigned long start, unsigned long end) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_inv_range(start, end); + smp_cache_call(SMP_DCACHE_INV_RANGE, start, end); + smp_unlock_cache(flags); +} + +/** + * mn10300_dcache_inv_range2 - Globally invalidate range of data cache + * @start: The start address of the region to be invalidated. + * @size: The size of the region to be invalidated. + * + * Invalidate a range of addresses in the data cache on all CPUs, between start + * and start+size-1 inclusive. + */ +void mn10300_dcache_inv_range2(unsigned long start, unsigned long size) +{ + unsigned long flags; + + flags = smp_lock_cache(); + mn10300_local_dcache_inv_range2(start, size); + smp_cache_call(SMP_DCACHE_INV_RANGE, start, start + size); + smp_unlock_cache(flags); +} diff --git a/arch/mn10300/mm/cache-smp.c b/arch/mn10300/mm/cache-smp.c new file mode 100644 index 000000000000..4a6e9a4b5b27 --- /dev/null +++ b/arch/mn10300/mm/cache-smp.c @@ -0,0 +1,105 @@ +/* SMP global caching code + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "cache-smp.h" + +DEFINE_SPINLOCK(smp_cache_lock); +static unsigned long smp_cache_mask; +static unsigned long smp_cache_start; +static unsigned long smp_cache_end; +static cpumask_t smp_cache_ipi_map; /* Bitmask of cache IPI done CPUs */ + +/** + * smp_cache_interrupt - Handle IPI request to flush caches. + * + * Handle a request delivered by IPI to flush the current CPU's + * caches. The parameters are stored in smp_cache_*. + */ +void smp_cache_interrupt(void) +{ + unsigned long opr_mask = smp_cache_mask; + + switch ((enum smp_dcache_ops)(opr_mask & SMP_DCACHE_OP_MASK)) { + case SMP_DCACHE_NOP: + break; + case SMP_DCACHE_INV: + mn10300_local_dcache_inv(); + break; + case SMP_DCACHE_INV_RANGE: + mn10300_local_dcache_inv_range(smp_cache_start, smp_cache_end); + break; + case SMP_DCACHE_FLUSH: + mn10300_local_dcache_flush(); + break; + case SMP_DCACHE_FLUSH_RANGE: + mn10300_local_dcache_flush_range(smp_cache_start, + smp_cache_end); + break; + case SMP_DCACHE_FLUSH_INV: + mn10300_local_dcache_flush_inv(); + break; + case SMP_DCACHE_FLUSH_INV_RANGE: + mn10300_local_dcache_flush_inv_range(smp_cache_start, + smp_cache_end); + break; + } + + switch ((enum smp_icache_ops)(opr_mask & SMP_ICACHE_OP_MASK)) { + case SMP_ICACHE_NOP: + break; + case SMP_ICACHE_INV: + mn10300_local_icache_inv(); + break; + case SMP_ICACHE_INV_RANGE: + mn10300_local_icache_inv_range(smp_cache_start, smp_cache_end); + break; + } + + cpu_clear(smp_processor_id(), smp_cache_ipi_map); +} + +/** + * smp_cache_call - Issue an IPI to request the other CPUs flush caches + * @opr_mask: Cache operation flags + * @start: Start address of request + * @end: End address of request + * + * Send cache flush IPI to other CPUs. This invokes smp_cache_interrupt() + * above on those other CPUs and then waits for them to finish. + * + * The caller must hold smp_cache_lock. + */ +void smp_cache_call(unsigned long opr_mask, + unsigned long start, unsigned long end) +{ + smp_cache_mask = opr_mask; + smp_cache_start = start; + smp_cache_end = end; + smp_cache_ipi_map = cpu_online_map; + cpu_clear(smp_processor_id(), smp_cache_ipi_map); + + send_IPI_allbutself(FLUSH_CACHE_IPI); + + while (!cpus_empty(smp_cache_ipi_map)) + /* nothing. lockup detection does not belong here */ + mb(); +} diff --git a/arch/mn10300/mm/cache-smp.h b/arch/mn10300/mm/cache-smp.h new file mode 100644 index 000000000000..cb52892aa66a --- /dev/null +++ b/arch/mn10300/mm/cache-smp.h @@ -0,0 +1,69 @@ +/* SMP caching definitions + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + + +/* + * Operation requests for smp_cache_call(). + * + * One of smp_icache_ops and one of smp_dcache_ops can be OR'd together. + */ +enum smp_icache_ops { + SMP_ICACHE_NOP = 0x0000, + SMP_ICACHE_INV = 0x0001, + SMP_ICACHE_INV_RANGE = 0x0002, +}; +#define SMP_ICACHE_OP_MASK 0x0003 + +enum smp_dcache_ops { + SMP_DCACHE_NOP = 0x0000, + SMP_DCACHE_INV = 0x0004, + SMP_DCACHE_INV_RANGE = 0x0008, + SMP_DCACHE_FLUSH = 0x000c, + SMP_DCACHE_FLUSH_RANGE = 0x0010, + SMP_DCACHE_FLUSH_INV = 0x0014, + SMP_DCACHE_FLUSH_INV_RANGE = 0x0018, +}; +#define SMP_DCACHE_OP_MASK 0x001c + +#define SMP_IDCACHE_INV_FLUSH (SMP_ICACHE_INV | SMP_DCACHE_FLUSH) +#define SMP_IDCACHE_INV_FLUSH_RANGE (SMP_ICACHE_INV_RANGE | SMP_DCACHE_FLUSH_RANGE) + +/* + * cache-smp.c + */ +#ifdef CONFIG_SMP +extern spinlock_t smp_cache_lock; + +extern void smp_cache_call(unsigned long opr_mask, + unsigned long addr, unsigned long end); + +static inline unsigned long smp_lock_cache(void) + __acquires(&smp_cache_lock) +{ + unsigned long flags; + spin_lock_irqsave(&smp_cache_lock, flags); + return flags; +} + +static inline void smp_unlock_cache(unsigned long flags) + __releases(&smp_cache_lock) +{ + spin_unlock_irqrestore(&smp_cache_lock, flags); +} + +#else +static inline unsigned long smp_lock_cache(void) { return 0; } +static inline void smp_unlock_cache(unsigned long flags) {} +static inline void smp_cache_call(unsigned long opr_mask, + unsigned long addr, unsigned long end) +{ +} +#endif /* CONFIG_SMP */ diff --git a/arch/mn10300/mm/cache.c b/arch/mn10300/mm/cache.c index bc35826f1357..0a1f0aa92ebc 100644 --- a/arch/mn10300/mm/cache.c +++ b/arch/mn10300/mm/cache.c @@ -18,8 +18,13 @@ #include #include #include +#include +#include "cache-smp.h" EXPORT_SYMBOL(mn10300_icache_inv); +EXPORT_SYMBOL(mn10300_icache_inv_range); +EXPORT_SYMBOL(mn10300_icache_inv_range2); +EXPORT_SYMBOL(mn10300_icache_inv_page); EXPORT_SYMBOL(mn10300_dcache_inv); EXPORT_SYMBOL(mn10300_dcache_inv_range); EXPORT_SYMBOL(mn10300_dcache_inv_range2); -- cgit v1.2.3 From 633171861a3120af011bb1ee8dd40069951dfeac Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:47 +0100 Subject: MN10300: Make the boot wrapper able to use writeback caching Make the boot wrapper able to use writeback caching, including flushing the cache before jumping to the main kernel. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/boot/compressed/head.S | 49 ++++++++++++++++++++++++++++++++++++- 1 file changed, 48 insertions(+), 1 deletion(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/boot/compressed/head.S b/arch/mn10300/boot/compressed/head.S index 502e1eb56709..4ef608a62416 100644 --- a/arch/mn10300/boot/compressed/head.S +++ b/arch/mn10300/boot/compressed/head.S @@ -14,6 +14,7 @@ #include #include +#include .globl startup_32 startup_32: @@ -37,8 +38,15 @@ startup_32: mov (a0),d0 btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy lne - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD,d0 # writethru dcache + +#ifdef CONFIG_MN10300_CACHE_ENABLED +#ifdef CONFIG_MN10300_CACHE_WBACK + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 +#else + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 +#endif /* WBACK */ movhu d0,(a0) # enable +#endif /* !ENABLED */ # clear the BSS area mov __bss_start,a0 @@ -54,6 +62,9 @@ bssclear_end: # decompress the kernel call decompress_kernel[],0 +#ifdef CONFIG_MN10300_CACHE_WBACK + call mn10300_dcache_flush_inv[],0 +#endif # disable caches again mov CHCTR,a0 @@ -69,10 +80,46 @@ bssclear_end: mov (4,a0),d1 mov (8,a0),d2 + # jump to the kernel proper entry point mov a3,sp mov CONFIG_KERNEL_TEXT_ADDRESS,a0 jmp (a0) + +############################################################################### +# +# Cache flush routines +# +############################################################################### +#ifdef CONFIG_MN10300_CACHE_WBACK +mn10300_dcache_flush_inv: + movhu (CHCTR),d0 + btst CHCTR_DCEN,d0 + beq mn10300_dcache_flush_inv_end + + mov L1_CACHE_NENTRIES,d1 + clr a1 + +mn10300_dcache_flush_inv_loop: + mov (DCACHE_PURGE_WAY0(0),a1),d0 # unconditional purge + mov (DCACHE_PURGE_WAY1(0),a1),d0 # unconditional purge + mov (DCACHE_PURGE_WAY2(0),a1),d0 # unconditional purge + mov (DCACHE_PURGE_WAY3(0),a1),d0 # unconditional purge + + add L1_CACHE_BYTES,a1 + add -1,d1 + bne mn10300_dcache_flush_inv_loop + +mn10300_dcache_flush_inv_end: + ret [],0 +#endif /* CONFIG_MN10300_CACHE_WBACK */ + + +############################################################################### +# +# Data areas +# +############################################################################### .data .align 4 param_save_area: -- cgit v1.2.3 From 8f19e3daf3fffee9e18a8812067a6a4b538ae6c8 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:48 +0100 Subject: MN10300: AM34 erratum requires MMUCTR read and write on exception entry An AM34 erratum requires MMUCTR read and write on entry to certain exceptions, prior to EPSW.NMID being cleared to allow NMIs to happen. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/Kconfig | 3 +++ arch/mn10300/kernel/entry.S | 8 ++++++++ arch/mn10300/mm/tlb-mn10300.S | 32 ++++++++++++++++++++++++++------ 3 files changed, 37 insertions(+), 6 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 21e2a534d98e..dd7b5700358b 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -20,6 +20,9 @@ config AM34_2 select MN10300_HAS_ATOMIC_OPS_UNIT select MN10300_HAS_CACHE_SNOOP +config ERRATUM_NEED_TO_RELOAD_MMUCTR + def_bool y if AM33_3 || AM34_2 + config MMU def_bool y diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index b82ce7b47fcb..355f68176771 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -251,6 +251,10 @@ double_fault_loop: ENTRY(raw_bus_error) add -4,sp mov d0,(sp) +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d0 + mov d0,(MMUCTR) +#endif mov (BCBERR),d0 # what btst BCBERR_BEMR_DMA,d0 # see if it was an external bus error beq __common_exception_aux # it wasn't @@ -282,6 +286,10 @@ ENTRY(nmi_handler) ENTRY(__common_exception) add -4,sp mov d0,(sp) +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d0 + mov d0,(MMUCTR) +#endif __common_exception_aux: mov (TBR),d0 diff --git a/arch/mn10300/mm/tlb-mn10300.S b/arch/mn10300/mm/tlb-mn10300.S index 7095147dcb8b..ccf622999a5b 100644 --- a/arch/mn10300/mm/tlb-mn10300.S +++ b/arch/mn10300/mm/tlb-mn10300.S @@ -27,7 +27,6 @@ ############################################################################### .type itlb_miss,@function ENTRY(itlb_miss) - and ~EPSW_NMID,epsw #ifdef CONFIG_GDBSTUB movm [d2,d3,a2],(sp) #else @@ -38,6 +37,12 @@ ENTRY(itlb_miss) nop #endif +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d2 + mov d2,(MMUCTR) +#endif + + and ~EPSW_NMID,epsw mov (IPTEU),d3 mov (PTBR),a2 mov d3,d2 @@ -79,7 +84,6 @@ itlb_miss_fault: ############################################################################### .type dtlb_miss,@function ENTRY(dtlb_miss) - and ~EPSW_NMID,epsw #ifdef CONFIG_GDBSTUB movm [d2,d3,a2],(sp) #else @@ -90,6 +94,12 @@ ENTRY(dtlb_miss) nop #endif +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d2 + mov d2,(MMUCTR) +#endif + + and ~EPSW_NMID,epsw mov (DPTEU),d3 mov (PTBR),a2 mov d3,d2 @@ -130,9 +140,15 @@ dtlb_miss_fault: ############################################################################### .type itlb_aerror,@function ENTRY(itlb_aerror) - and ~EPSW_NMID,epsw add -4,sp SAVE_ALL + +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d1 + mov d1,(MMUCTR) +#endif + + and ~EPSW_NMID,epsw add -4,sp # need to pass three params # calculate the fault code @@ -148,7 +164,6 @@ ENTRY(itlb_aerror) clr d0 mov d0,(IPTEL) - and ~EPSW_NMID,epsw or EPSW_IE,epsw mov fp,d0 call do_page_fault[],0 # do_page_fault(regs,code,addr @@ -163,10 +178,16 @@ ENTRY(itlb_aerror) ############################################################################### .type dtlb_aerror,@function ENTRY(dtlb_aerror) - and ~EPSW_NMID,epsw add -4,sp SAVE_ALL + +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d1 + mov d1,(MMUCTR) +#endif + add -4,sp # need to pass three params + and ~EPSW_NMID,epsw # calculate the fault code movhu (MMUFCR_DFC),d1 @@ -180,7 +201,6 @@ ENTRY(dtlb_aerror) clr d0 mov d0,(DPTEL) - and ~EPSW_NMID,epsw or EPSW_IE,epsw mov fp,d0 call do_page_fault[],0 # do_page_fault(regs,code,addr -- cgit v1.2.3 From 492e675116003b99dfcf0fa70084027e86bc0161 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Oct 2010 17:28:49 +0100 Subject: MN10300: Rename __flush_tlb*() to local_flush_tlb*() Rename __flush_tlb*() to local_flush_tlb*() as it's more appropriate, and ready to differentiate local from global TLB flushes when SMP is introduced. Whilst we're at it, get rid of __flush_tlb_global() and make local_flush_tlb_page() take an mm_struct pointer rather than VMA pointer. Signed-off-by: David Howells --- arch/mn10300/include/asm/highmem.h | 4 +-- arch/mn10300/include/asm/mmu_context.h | 2 +- arch/mn10300/include/asm/tlbflush.h | 56 +++++++++++++++++++++------------- arch/mn10300/mm/init.c | 2 +- arch/mn10300/mm/mmu-context.c | 4 +-- arch/mn10300/mm/pgtable.c | 2 +- 6 files changed, 42 insertions(+), 28 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/highmem.h b/arch/mn10300/include/asm/highmem.h index f577ba2268ca..3817d9f34e72 100644 --- a/arch/mn10300/include/asm/highmem.h +++ b/arch/mn10300/include/asm/highmem.h @@ -87,7 +87,7 @@ static inline unsigned long __kmap_atomic(struct page *page) BUG(); #endif set_pte(kmap_pte - idx, mk_pte(page, kmap_prot)); - __flush_tlb_one(vaddr); + local_flush_tlb_one(vaddr); return vaddr; } @@ -116,7 +116,7 @@ static inline void __kunmap_atomic(unsigned long vaddr) * this pte without first remap it */ pte_clear(kmap_pte - idx); - __flush_tlb_one(vaddr); + local_flush_tlb_one(vaddr); } #endif pagefault_enable(); diff --git a/arch/mn10300/include/asm/mmu_context.h b/arch/mn10300/include/asm/mmu_context.h index cb294c244de3..24d63f0f7377 100644 --- a/arch/mn10300/include/asm/mmu_context.h +++ b/arch/mn10300/include/asm/mmu_context.h @@ -58,7 +58,7 @@ static inline unsigned long allocate_mmu_context(struct mm_struct *mm) if (!(mc & MMU_CONTEXT_TLBPID_MASK)) { /* we exhausted the TLB PIDs of this version on this CPU, so we * flush this CPU's TLB in its entirety and start new cycle */ - flush_tlb_all(); + local_flush_tlb_all(); /* fix the TLB version if needed (we avoid version #0 so as to * distingush MMU_NO_CONTEXT) */ diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h index 1a7e29281c5d..5d54bf57e6c3 100644 --- a/arch/mn10300/include/asm/tlbflush.h +++ b/arch/mn10300/include/asm/tlbflush.h @@ -13,21 +13,37 @@ #include -#define __flush_tlb() \ -do { \ - int w; \ - __asm__ __volatile__ \ - (" mov %1,%0 \n" \ - " or %2,%0 \n" \ - " mov %0,%1 \n" \ - : "=d"(w) \ - : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \ - : "cc", "memory" \ - ); \ -} while (0) +/** + * local_flush_tlb - Flush the current MM's entries from the local CPU's TLBs + */ +static inline void local_flush_tlb(void) +{ + int w; + asm volatile( + " mov %1,%0 \n" + " or %2,%0 \n" + " mov %0,%1 \n" + : "=d"(w) + : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) + : "cc", "memory"); +} -#define __flush_tlb_all() __flush_tlb() -#define __flush_tlb_one(addr) __flush_tlb() +/** + * local_flush_tlb_all - Flush all entries from the local CPU's TLBs + */ +#define local_flush_tlb_all() local_flush_tlb() + +/** + * local_flush_tlb_one - Flush one entry from the local CPU's TLBs + */ +#define local_flush_tlb_one(addr) local_flush_tlb() + +/** + * local_flush_tlb_page - Flush a page's entry from the local CPU's TLBs + * @mm: The MM to flush for + * @addr: The address of the target page in RAM (not its page struct) + */ +extern void local_flush_tlb_page(struct mm_struct *mm, unsigned long addr); /* @@ -43,14 +59,14 @@ do { \ #define flush_tlb_all() \ do { \ preempt_disable(); \ - __flush_tlb_all(); \ + local_flush_tlb_all(); \ preempt_enable(); \ } while (0) #define flush_tlb_mm(mm) \ do { \ preempt_disable(); \ - __flush_tlb_all(); \ + local_flush_tlb_all(); \ preempt_enable(); \ } while (0) @@ -59,13 +75,13 @@ do { \ unsigned long __s __attribute__((unused)) = (start); \ unsigned long __e __attribute__((unused)) = (end); \ preempt_disable(); \ - __flush_tlb_all(); \ + local_flush_tlb_all(); \ preempt_enable(); \ } while (0) +#define flush_tlb_page(vma, addr) local_flush_tlb_page((vma)->vm_mm, addr) +#define flush_tlb() flush_tlb_all() -#define __flush_tlb_global() flush_tlb_all() -#define flush_tlb() flush_tlb_all() #define flush_tlb_kernel_range(start, end) \ do { \ unsigned long __s __attribute__((unused)) = (start); \ @@ -73,8 +89,6 @@ do { \ flush_tlb_all(); \ } while (0) -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr); - #define flush_tlb_pgtables(mm, start, end) do {} while (0) #endif /* _ASM_TLBFLUSH_H */ diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c index f86c28315a8e..1daf97fd7c99 100644 --- a/arch/mn10300/mm/init.c +++ b/arch/mn10300/mm/init.c @@ -73,7 +73,7 @@ void __init paging_init(void) /* pass the memory from the bootmem allocator to the main allocator */ free_area_init(zones_size); - __flush_tlb_all(); + local_flush_tlb_all(); } /* diff --git a/arch/mn10300/mm/mmu-context.c b/arch/mn10300/mm/mmu-context.c index 36ba02191d40..3d83966e30e1 100644 --- a/arch/mn10300/mm/mmu-context.c +++ b/arch/mn10300/mm/mmu-context.c @@ -23,7 +23,7 @@ unsigned long mmu_context_cache[NR_CPUS] = { /* * flush the specified TLB entry */ -void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) +void local_flush_tlb_page(struct mm_struct *mm, unsigned long addr) { unsigned long pteu, cnx, flags; @@ -33,7 +33,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) * interference from vmalloc'd regions */ local_irq_save(flags); - cnx = mm_context(vma->vm_mm); + cnx = mm_context(mm); if (cnx != MMU_NO_CONTEXT) { pteu = addr | (cnx & 0x000000ffUL); diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c index 9c1624c9e4e9..450f7ba3f8f2 100644 --- a/arch/mn10300/mm/pgtable.c +++ b/arch/mn10300/mm/pgtable.c @@ -59,7 +59,7 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags) * It's enough to flush this one mapping. * (PGE mappings get flushed as well) */ - __flush_tlb_one(vaddr); + local_flush_tlb_one(vaddr); } pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) -- cgit v1.2.3 From a9bc60ebfd5766ce5f6095d0fed3d9978990122f Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:49 +0100 Subject: MN10300: Make the use of PIDR to mark TLB entries controllable Make controllable the use of the PIDR register to mark TLB entries as belonging to particular processes. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/Kconfig | 3 ++ arch/mn10300/include/asm/mmu_context.h | 59 +++++++++++++++++----------------- arch/mn10300/include/asm/tlbflush.h | 43 +++++++++++++++++++++++-- arch/mn10300/mm/mmu-context.c | 41 +++++++---------------- 4 files changed, 84 insertions(+), 62 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index dd7b5700358b..7bd920b1c06f 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -142,6 +142,9 @@ config FPU source "arch/mn10300/mm/Kconfig.cache" +config MN10300_TLB_USE_PIDR + def_bool y + menu "Memory layout options" config KERNEL_RAM_BASE_ADDRESS diff --git a/arch/mn10300/include/asm/mmu_context.h b/arch/mn10300/include/asm/mmu_context.h index 24d63f0f7377..5fb3648968ae 100644 --- a/arch/mn10300/include/asm/mmu_context.h +++ b/arch/mn10300/include/asm/mmu_context.h @@ -27,28 +27,22 @@ #include #include +#define MMU_CONTEXT_TLBPID_NR 256 #define MMU_CONTEXT_TLBPID_MASK 0x000000ffUL #define MMU_CONTEXT_VERSION_MASK 0xffffff00UL #define MMU_CONTEXT_FIRST_VERSION 0x00000100UL #define MMU_NO_CONTEXT 0x00000000UL - -extern unsigned long mmu_context_cache[NR_CPUS]; -#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()]) +#define MMU_CONTEXT_TLBPID_LOCK_NR 0 #define enter_lazy_tlb(mm, tsk) do {} while (0) -#ifdef CONFIG_SMP -#define cpu_ran_vm(cpu, mm) \ - cpumask_set_cpu((cpu), mm_cpumask(mm)) -#define cpu_maybe_ran_vm(cpu, mm) \ - cpumask_test_and_set_cpu((cpu), mm_cpumask(mm)) -#else -#define cpu_ran_vm(cpu, mm) do {} while (0) -#define cpu_maybe_ran_vm(cpu, mm) true -#endif /* CONFIG_SMP */ +#ifdef CONFIG_MN10300_TLB_USE_PIDR +extern unsigned long mmu_context_cache[NR_CPUS]; +#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()]) -/* - * allocate an MMU context +/** + * allocate_mmu_context - Allocate storage for the arch-specific MMU data + * @mm: The userspace VM context being set up */ static inline unsigned long allocate_mmu_context(struct mm_struct *mm) { @@ -100,35 +94,42 @@ static inline int init_new_context(struct task_struct *tsk, return 0; } -/* - * destroy context related info for an mm_struct that is about to be put to - * rest - */ -#define destroy_context(mm) do { } while (0) - /* * after we have set current->mm to a new value, this activates the context for * the new mm so we see the new mappings. */ -static inline void activate_context(struct mm_struct *mm, int cpu) +static inline void activate_context(struct mm_struct *mm) { PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK; } +#else /* CONFIG_MN10300_TLB_USE_PIDR */ -/* - * change between virtual memory sets +#define init_new_context(tsk, mm) (0) +#define activate_context(mm) local_flush_tlb() + +#endif /* CONFIG_MN10300_TLB_USE_PIDR */ + +/** + * destroy_context - Destroy mm context information + * @mm: The MM being destroyed. + * + * Destroy context related info for an mm_struct that is about to be put to + * rest + */ +#define destroy_context(mm) do {} while (0) + +/** + * switch_mm - Change between userspace virtual memory contexts + * @prev: The outgoing MM context. + * @next: The incoming MM context. + * @tsk: The incoming task. */ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { - int cpu = smp_processor_id(); - if (prev != next) { - cpu_ran_vm(cpu, next); - activate_context(next, cpu); PTBR = (unsigned long) next->pgd; - } else if (!cpu_maybe_ran_vm(cpu, next)) { - activate_context(next, cpu); + activate_context(next); } } diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h index 5d54bf57e6c3..c3c194d4031e 100644 --- a/arch/mn10300/include/asm/tlbflush.h +++ b/arch/mn10300/include/asm/tlbflush.h @@ -13,6 +13,12 @@ #include +struct tlb_state { + struct mm_struct *active_mm; + int state; +}; +DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate); + /** * local_flush_tlb - Flush the current MM's entries from the local CPU's TLBs */ @@ -31,20 +37,51 @@ static inline void local_flush_tlb(void) /** * local_flush_tlb_all - Flush all entries from the local CPU's TLBs */ -#define local_flush_tlb_all() local_flush_tlb() +static inline void local_flush_tlb_all(void) +{ + local_flush_tlb(); +} /** * local_flush_tlb_one - Flush one entry from the local CPU's TLBs */ -#define local_flush_tlb_one(addr) local_flush_tlb() +static inline void local_flush_tlb_one(unsigned long addr) +{ + local_flush_tlb(); +} /** * local_flush_tlb_page - Flush a page's entry from the local CPU's TLBs * @mm: The MM to flush for * @addr: The address of the target page in RAM (not its page struct) */ -extern void local_flush_tlb_page(struct mm_struct *mm, unsigned long addr); +static inline +void local_flush_tlb_page(struct mm_struct *mm, unsigned long addr) +{ + unsigned long pteu, flags, cnx; + + addr &= PAGE_MASK; + local_irq_save(flags); + + cnx = 1; +#ifdef CONFIG_MN10300_TLB_USE_PIDR + cnx = mm->context.tlbpid[smp_processor_id()]; +#endif + if (cnx) { + pteu = addr; +#ifdef CONFIG_MN10300_TLB_USE_PIDR + pteu |= cnx & xPTEU_PID; +#endif + IPTEU = pteu; + DPTEU = pteu; + if (IPTEL & xPTEL_V) + IPTEL = 0; + if (DPTEL & xPTEL_V) + DPTEL = 0; + } + local_irq_restore(flags); +} /* * TLB flushing: diff --git a/arch/mn10300/mm/mmu-context.c b/arch/mn10300/mm/mmu-context.c index 3d83966e30e1..a4f7d3dcc6e6 100644 --- a/arch/mn10300/mm/mmu-context.c +++ b/arch/mn10300/mm/mmu-context.c @@ -13,40 +13,15 @@ #include #include +#ifdef CONFIG_MN10300_TLB_USE_PIDR /* * list of the MMU contexts last allocated on each CPU */ unsigned long mmu_context_cache[NR_CPUS] = { - [0 ... NR_CPUS - 1] = MMU_CONTEXT_FIRST_VERSION * 2 - 1, + [0 ... NR_CPUS - 1] = + MMU_CONTEXT_FIRST_VERSION * 2 - (1 - MMU_CONTEXT_TLBPID_LOCK_NR), }; - -/* - * flush the specified TLB entry - */ -void local_flush_tlb_page(struct mm_struct *mm, unsigned long addr) -{ - unsigned long pteu, cnx, flags; - - addr &= PAGE_MASK; - - /* make sure the context doesn't migrate and defend against - * interference from vmalloc'd regions */ - local_irq_save(flags); - - cnx = mm_context(mm); - - if (cnx != MMU_NO_CONTEXT) { - pteu = addr | (cnx & 0x000000ffUL); - IPTEU = pteu; - DPTEU = pteu; - if (IPTEL & xPTEL_V) - IPTEL = 0; - if (DPTEL & xPTEL_V) - DPTEL = 0; - } - - local_irq_restore(flags); -} +#endif /* CONFIG_MN10300_TLB_USE_PIDR */ /* * preemptively set a TLB entry @@ -63,10 +38,16 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t *pte * interference from vmalloc'd regions */ local_irq_save(flags); + cnx = ~MMU_NO_CONTEXT; +#ifdef CONFIG_MN10300_TLB_USE_PIDR cnx = mm_context(vma->vm_mm); +#endif if (cnx != MMU_NO_CONTEXT) { - pteu = addr | (cnx & 0x000000ffUL); + pteu = addr; +#ifdef CONFIG_MN10300_TLB_USE_PIDR + pteu |= cnx & MMU_CONTEXT_TLBPID_MASK; +#endif if (!(pte_val(pte) & _PAGE_NX)) { IPTEU = pteu; if (IPTEL & xPTEL_V) -- cgit v1.2.3 From dccbf4853a31a3f774f38c402209d23388d99f52 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:50 +0100 Subject: MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control as the bits are a more suitable layout. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/include/asm/cpu-regs.h | 19 ++++++----- arch/mn10300/include/asm/pgtable.h | 66 ++++++++++++++++++++----------------- arch/mn10300/mm/tlb-mn10300.S | 27 ++++++++++----- 3 files changed, 65 insertions(+), 47 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h index 00e306ce52ce..90ed4a365c97 100644 --- a/arch/mn10300/include/asm/cpu-regs.h +++ b/arch/mn10300/include/asm/cpu-regs.h @@ -252,14 +252,6 @@ asm(" .am33_2\n"); #define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */ #define xPTEL_PPN 0xfffff006 /* physical page number */ -#define xPTEL_V_BIT 0 /* bit numbers corresponding to above masks */ -#define xPTEL_UNUSED1_BIT 1 -#define xPTEL_UNUSED2_BIT 2 -#define xPTEL_C_BIT 3 -#define xPTEL_PV_BIT 4 -#define xPTEL_D_BIT 5 -#define xPTEL_G_BIT 9 - #define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */ #define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */ #define xPTEU_VPN 0xfffffc00 /* virtual page number */ @@ -283,7 +275,16 @@ asm(" .am33_2\n"); #define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */ #define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */ #define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */ -#define xPTEL2_PPN 0xfffffc00 /* physical page number */ +#define xPTEL2_CWT 0x00000400 /* cacheable write-through */ +#define xPTEL2_UNUSED1 0x00000800 /* unused bit (broadcast mask) */ +#define xPTEL2_PPN 0xfffff000 /* physical page number */ + +#define xPTEL2_V_BIT 0 /* bit numbers corresponding to above masks */ +#define xPTEL2_C_BIT 1 +#define xPTEL2_PV_BIT 2 +#define xPTEL2_D_BIT 3 +#define xPTEL2_G_BIT 7 +#define xPTEL2_UNUSED1_BIT 11 #define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */ #define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */ diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h index b049a8bd1577..05dda641af80 100644 --- a/arch/mn10300/include/asm/pgtable.h +++ b/arch/mn10300/include/asm/pgtable.h @@ -98,38 +98,44 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE]; #endif -/* IPTEL/DPTEL bit assignments */ -#define _PAGE_BIT_VALID xPTEL_V_BIT -#define _PAGE_BIT_ACCESSED xPTEL_UNUSED1_BIT /* mustn't be loaded into IPTEL/DPTEL */ -#define _PAGE_BIT_NX xPTEL_UNUSED2_BIT /* mustn't be loaded into IPTEL/DPTEL */ -#define _PAGE_BIT_CACHE xPTEL_C_BIT -#define _PAGE_BIT_PRESENT xPTEL_PV_BIT -#define _PAGE_BIT_DIRTY xPTEL_D_BIT -#define _PAGE_BIT_GLOBAL xPTEL_G_BIT - -#define _PAGE_VALID xPTEL_V -#define _PAGE_ACCESSED xPTEL_UNUSED1 -#define _PAGE_NX xPTEL_UNUSED2 /* no-execute bit */ -#define _PAGE_CACHE xPTEL_C -#define _PAGE_PRESENT xPTEL_PV -#define _PAGE_DIRTY xPTEL_D -#define _PAGE_PROT xPTEL_PR -#define _PAGE_PROT_RKNU xPTEL_PR_ROK -#define _PAGE_PROT_WKNU xPTEL_PR_RWK -#define _PAGE_PROT_RKRU xPTEL_PR_ROK_ROU -#define _PAGE_PROT_WKRU xPTEL_PR_RWK_ROU -#define _PAGE_PROT_WKWU xPTEL_PR_RWK_RWU -#define _PAGE_GLOBAL xPTEL_G -#define _PAGE_PSE xPTEL_PS_4Mb /* 4MB page */ - -#define _PAGE_FILE xPTEL_UNUSED1_BIT /* set:pagecache unset:swap */ - -#define __PAGE_PROT_UWAUX 0x040 -#define __PAGE_PROT_USER 0x080 -#define __PAGE_PROT_WRITE 0x100 +/* IPTEL2/DPTEL2 bit assignments */ +#define _PAGE_BIT_VALID xPTEL2_V_BIT +#define _PAGE_BIT_CACHE xPTEL2_C_BIT +#define _PAGE_BIT_PRESENT xPTEL2_PV_BIT +#define _PAGE_BIT_DIRTY xPTEL2_D_BIT +#define _PAGE_BIT_GLOBAL xPTEL2_G_BIT +#define _PAGE_BIT_ACCESSED xPTEL2_UNUSED1_BIT /* mustn't be loaded into IPTEL2/DPTEL2 */ + +#define _PAGE_VALID xPTEL2_V +#define _PAGE_CACHE xPTEL2_C +#define _PAGE_PRESENT xPTEL2_PV +#define _PAGE_DIRTY xPTEL2_D +#define _PAGE_PROT xPTEL2_PR +#define _PAGE_PROT_RKNU xPTEL2_PR_ROK +#define _PAGE_PROT_WKNU xPTEL2_PR_RWK +#define _PAGE_PROT_RKRU xPTEL2_PR_ROK_ROU +#define _PAGE_PROT_WKRU xPTEL2_PR_RWK_ROU +#define _PAGE_PROT_WKWU xPTEL2_PR_RWK_RWU +#define _PAGE_GLOBAL xPTEL2_G +#define _PAGE_PS_MASK xPTEL2_PS +#define _PAGE_PS_4Kb xPTEL2_PS_4Kb +#define _PAGE_PS_128Kb xPTEL2_PS_128Kb +#define _PAGE_PS_1Kb xPTEL2_PS_1Kb +#define _PAGE_PS_4Mb xPTEL2_PS_4Mb +#define _PAGE_PSE xPTEL2_PS_4Mb /* 4MB page */ +#define _PAGE_CACHE_WT xPTEL2_CWT +#define _PAGE_ACCESSED xPTEL2_UNUSED1 +#define _PAGE_NX 0 /* no-execute bit */ + +/* If _PAGE_VALID is clear, we use these: */ +#define _PAGE_FILE xPTEL2_C /* set:pagecache unset:swap */ +#define _PAGE_PROTNONE 0x000 /* If not present */ + +#define __PAGE_PROT_UWAUX 0x010 +#define __PAGE_PROT_USER 0x020 +#define __PAGE_PROT_WRITE 0x040 #define _PAGE_PRESENTV (_PAGE_PRESENT|_PAGE_VALID) -#define _PAGE_PROTNONE 0x000 /* If not present */ #ifndef __ASSEMBLY__ diff --git a/arch/mn10300/mm/tlb-mn10300.S b/arch/mn10300/mm/tlb-mn10300.S index ccf622999a5b..b9940177d81b 100644 --- a/arch/mn10300/mm/tlb-mn10300.S +++ b/arch/mn10300/mm/tlb-mn10300.S @@ -61,10 +61,16 @@ ENTRY(itlb_miss) btst _PAGE_VALID,d2 beq itlb_miss_fault # jump if doesn't point to a page # (might be a swap id) +#if ((_PAGE_ACCESSED & 0xffffff00) == 0) bset _PAGE_ACCESSED,(0,a2) - and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2 +#elif ((_PAGE_ACCESSED & 0xffff00ff) == 0) + bset +(_PAGE_ACCESSED >> 8),(1,a2) +#else +#error "_PAGE_ACCESSED value is out of range" +#endif + and ~xPTEL2_UNUSED1,d2 itlb_miss_set: - mov d2,(IPTEL) # change the TLB + mov d2,(IPTEL2) # change the TLB #ifdef CONFIG_GDBSTUB movm (sp),[d2,d3,a2] #endif @@ -118,10 +124,16 @@ ENTRY(dtlb_miss) btst _PAGE_VALID,d2 beq dtlb_miss_fault # jump if doesn't point to a page # (might be a swap id) +#if ((_PAGE_ACCESSED & 0xffffff00) == 0) bset _PAGE_ACCESSED,(0,a2) - and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2 +#elif ((_PAGE_ACCESSED & 0xffff00ff) == 0) + bset +(_PAGE_ACCESSED >> 8),(1,a2) +#else +#error "_PAGE_ACCESSED value is out of range" +#endif + and ~xPTEL2_UNUSED1,d2 dtlb_miss_set: - mov d2,(DPTEL) # change the TLB + mov d2,(DPTEL2) # change the TLB #ifdef CONFIG_GDBSTUB movm (sp),[d2,d3,a2] #endif @@ -156,13 +168,12 @@ ENTRY(itlb_aerror) or 0x00010000,d1 # it's an instruction fetch # determine the page address - mov (IPTEU),a2 - mov a2,d0 + mov (IPTEU),d0 and PAGE_MASK,d0 mov d0,(12,sp) clr d0 - mov d0,(IPTEL) + mov d0,(IPTEL2) or EPSW_IE,epsw mov fp,d0 @@ -199,7 +210,7 @@ ENTRY(dtlb_aerror) mov d0,(12,sp) clr d0 - mov d0,(DPTEL) + mov d0,(DPTEL2) or EPSW_IE,epsw mov fp,d0 -- cgit v1.2.3 From 965ea4bbb9ae926358273368144ba838c561bc38 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:51 +0100 Subject: MN10300: SMP TLB flushing Implement global TLB flushing for MN10300. This will be used by the AM34 which is SMP capable. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/include/asm/mmu_context.h | 22 ++++ arch/mn10300/include/asm/tlbflush.h | 81 ++++++++----- arch/mn10300/mm/Makefile | 2 + arch/mn10300/mm/tlb-smp.c | 214 +++++++++++++++++++++++++++++++++ 4 files changed, 290 insertions(+), 29 deletions(-) create mode 100644 arch/mn10300/mm/tlb-smp.c (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/mmu_context.h b/arch/mn10300/include/asm/mmu_context.h index 5fb3648968ae..c8f6c82672ad 100644 --- a/arch/mn10300/include/asm/mmu_context.h +++ b/arch/mn10300/include/asm/mmu_context.h @@ -36,6 +36,22 @@ #define enter_lazy_tlb(mm, tsk) do {} while (0) +static inline void cpu_ran_vm(int cpu, struct mm_struct *mm) +{ +#ifdef CONFIG_SMP + cpumask_set_cpu(cpu, mm_cpumask(mm)); +#endif +} + +static inline bool cpu_maybe_ran_vm(int cpu, struct mm_struct *mm) +{ +#ifdef CONFIG_SMP + return cpumask_test_and_set_cpu(cpu, mm_cpumask(mm)); +#else + return true; +#endif +} + #ifdef CONFIG_MN10300_TLB_USE_PIDR extern unsigned long mmu_context_cache[NR_CPUS]; #define mm_context(mm) (mm->context.tlbpid[smp_processor_id()]) @@ -127,7 +143,13 @@ static inline void activate_context(struct mm_struct *mm) static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { + int cpu = smp_processor_id(); + if (prev != next) { +#ifdef CONFIG_SMP + per_cpu(cpu_tlbstate, cpu).active_mm = next; +#endif + cpu_ran_vm(cpu, next); PTBR = (unsigned long) next->pgd; activate_context(next); } diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h index c3c194d4031e..efddd6e1adea 100644 --- a/arch/mn10300/include/asm/tlbflush.h +++ b/arch/mn10300/include/asm/tlbflush.h @@ -11,6 +11,7 @@ #ifndef _ASM_TLBFLUSH_H #define _ASM_TLBFLUSH_H +#include #include struct tlb_state { @@ -93,39 +94,61 @@ void local_flush_tlb_page(struct mm_struct *mm, unsigned long addr) * - flush_tlb_range(mm, start, end) flushes a range of pages * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables */ -#define flush_tlb_all() \ -do { \ - preempt_disable(); \ - local_flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - -#define flush_tlb_mm(mm) \ -do { \ - preempt_disable(); \ - local_flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - -#define flush_tlb_range(vma, start, end) \ -do { \ - unsigned long __s __attribute__((unused)) = (start); \ - unsigned long __e __attribute__((unused)) = (end); \ - preempt_disable(); \ - local_flush_tlb_all(); \ - preempt_enable(); \ -} while (0) +#ifdef CONFIG_SMP + +#include + +extern void flush_tlb_all(void); +extern void flush_tlb_current_task(void); +extern void flush_tlb_mm(struct mm_struct *); +extern void flush_tlb_page(struct vm_area_struct *, unsigned long); + +#define flush_tlb() flush_tlb_current_task() + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + flush_tlb_mm(vma->vm_mm); +} + +#else /* CONFIG_SMP */ + +static inline void flush_tlb_all(void) +{ + preempt_disable(); + local_flush_tlb_all(); + preempt_enable(); +} + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + preempt_disable(); + local_flush_tlb_all(); + preempt_enable(); +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + preempt_disable(); + local_flush_tlb_all(); + preempt_enable(); +} #define flush_tlb_page(vma, addr) local_flush_tlb_page((vma)->vm_mm, addr) #define flush_tlb() flush_tlb_all() -#define flush_tlb_kernel_range(start, end) \ -do { \ - unsigned long __s __attribute__((unused)) = (start); \ - unsigned long __e __attribute__((unused)) = (end); \ - flush_tlb_all(); \ -} while (0) +#endif /* CONFIG_SMP */ -#define flush_tlb_pgtables(mm, start, end) do {} while (0) +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + flush_tlb_all(); +} + +static inline void flush_tlb_pgtables(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ +} #endif /* _ASM_TLBFLUSH_H */ diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile index 184745f94c32..203fee23f7d7 100644 --- a/arch/mn10300/mm/Makefile +++ b/arch/mn10300/mm/Makefile @@ -18,3 +18,5 @@ cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o obj-y := \ init.o fault.o pgtable.o extable.o tlb-mn10300.o mmu-context.o \ misalignment.o dma-alloc.o $(cacheflush-y) + +obj-$(CONFIG_SMP) += tlb-smp.o diff --git a/arch/mn10300/mm/tlb-smp.c b/arch/mn10300/mm/tlb-smp.c new file mode 100644 index 000000000000..0b6a5ad1960e --- /dev/null +++ b/arch/mn10300/mm/tlb-smp.c @@ -0,0 +1,214 @@ +/* SMP TLB support routines. + * + * Copyright (C) 2006-2008 Panasonic Corporation + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * For flush TLB + */ +#define FLUSH_ALL 0xffffffff + +static cpumask_t flush_cpumask; +static struct mm_struct *flush_mm; +static unsigned long flush_va; +static DEFINE_SPINLOCK(tlbstate_lock); + +DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { + &init_mm, 0 +}; + +static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, + unsigned long va); +static void do_flush_tlb_all(void *info); + +/** + * smp_flush_tlb - Callback to invalidate the TLB. + * @unused: Callback context (ignored). + */ +void smp_flush_tlb(void *unused) +{ + unsigned long cpu_id; + + cpu_id = get_cpu(); + + if (!cpu_isset(cpu_id, flush_cpumask)) + /* This was a BUG() but until someone can quote me the line + * from the intel manual that guarantees an IPI to multiple + * CPUs is retried _only_ on the erroring CPUs its staying as a + * return + * + * BUG(); + */ + goto out; + + if (flush_va == FLUSH_ALL) + local_flush_tlb(); + else + local_flush_tlb_page(flush_mm, flush_va); + + smp_mb__before_clear_bit(); + cpu_clear(cpu_id, flush_cpumask); + smp_mb__after_clear_bit(); +out: + put_cpu(); +} + +/** + * flush_tlb_others - Tell the specified CPUs to invalidate their TLBs + * @cpumask: The list of CPUs to target. + * @mm: The VM context to flush from (if va!=FLUSH_ALL). + * @va: Virtual address to flush or FLUSH_ALL to flush everything. + */ +static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, + unsigned long va) +{ + cpumask_t tmp; + + /* A couple of sanity checks (to be removed): + * - mask must not be empty + * - current CPU must not be in mask + * - we do not send IPIs to as-yet unbooted CPUs. + */ + BUG_ON(!mm); + BUG_ON(cpus_empty(cpumask)); + BUG_ON(cpu_isset(smp_processor_id(), cpumask)); + + cpus_and(tmp, cpumask, cpu_online_map); + BUG_ON(!cpus_equal(cpumask, tmp)); + + /* I'm not happy about this global shared spinlock in the MM hot path, + * but we'll see how contended it is. + * + * Temporarily this turns IRQs off, so that lockups are detected by the + * NMI watchdog. + */ + spin_lock(&tlbstate_lock); + + flush_mm = mm; + flush_va = va; +#if NR_CPUS <= BITS_PER_LONG + atomic_set_mask(cpumask.bits[0], &flush_cpumask.bits[0]); +#else +#error Not supported. +#endif + + /* FIXME: if NR_CPUS>=3, change send_IPI_mask */ + smp_call_function(smp_flush_tlb, NULL, 1); + + while (!cpus_empty(flush_cpumask)) + /* Lockup detection does not belong here */ + smp_mb(); + + flush_mm = NULL; + flush_va = 0; + spin_unlock(&tlbstate_lock); +} + +/** + * flush_tlb_mm - Invalidate TLB of specified VM context + * @mm: The VM context to invalidate. + */ +void flush_tlb_mm(struct mm_struct *mm) +{ + cpumask_t cpu_mask; + + preempt_disable(); + cpu_mask = mm->cpu_vm_mask; + cpu_clear(smp_processor_id(), cpu_mask); + + local_flush_tlb(); + if (!cpus_empty(cpu_mask)) + flush_tlb_others(cpu_mask, mm, FLUSH_ALL); + + preempt_enable(); +} + +/** + * flush_tlb_current_task - Invalidate TLB of current task + */ +void flush_tlb_current_task(void) +{ + struct mm_struct *mm = current->mm; + cpumask_t cpu_mask; + + preempt_disable(); + cpu_mask = mm->cpu_vm_mask; + cpu_clear(smp_processor_id(), cpu_mask); + + local_flush_tlb(); + if (!cpus_empty(cpu_mask)) + flush_tlb_others(cpu_mask, mm, FLUSH_ALL); + + preempt_enable(); +} + +/** + * flush_tlb_page - Invalidate TLB of page + * @vma: The VM context to invalidate the page for. + * @va: The virtual address of the page to invalidate. + */ +void flush_tlb_page(struct vm_area_struct *vma, unsigned long va) +{ + struct mm_struct *mm = vma->vm_mm; + cpumask_t cpu_mask; + + preempt_disable(); + cpu_mask = mm->cpu_vm_mask; + cpu_clear(smp_processor_id(), cpu_mask); + + local_flush_tlb_page(mm, va); + if (!cpus_empty(cpu_mask)) + flush_tlb_others(cpu_mask, mm, va); + + preempt_enable(); +} + +/** + * do_flush_tlb_all - Callback to completely invalidate a TLB + * @unused: Callback context (ignored). + */ +static void do_flush_tlb_all(void *unused) +{ + local_flush_tlb_all(); +} + +/** + * flush_tlb_all - Completely invalidate TLBs on all CPUs + */ +void flush_tlb_all(void) +{ + on_each_cpu(do_flush_tlb_all, 0, 1); +} -- cgit v1.2.3 From 278d91c4609d55202c1e63d5fc5f01466cc7bbab Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:52 +0100 Subject: MN10300: Make the FPU operate in non-lazy mode under SMP Make the FPU operate in non-lazy mode under SMP so that when the process that is currently using the FPU migrates to a different CPU, we don't have to ping its previous CPU to flush the FPU context. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/Kconfig | 15 ++ arch/mn10300/include/asm/elf.h | 2 - arch/mn10300/include/asm/exceptions.h | 1 - arch/mn10300/include/asm/fpu.h | 157 ++++++++++++------- arch/mn10300/include/asm/processor.h | 1 + arch/mn10300/include/asm/system.h | 16 ++ arch/mn10300/kernel/Makefile | 8 +- arch/mn10300/kernel/asm-offsets.c | 9 ++ arch/mn10300/kernel/fpu-low.S | 265 ++++++++++++++++++++------------ arch/mn10300/kernel/fpu-nofpu-low.S | 39 +++++ arch/mn10300/kernel/fpu-nofpu.c | 30 ++++ arch/mn10300/kernel/fpu.c | 141 +++++++---------- arch/mn10300/kernel/traps.c | 2 - arch/mn10300/proc-mn103e010/proc-init.c | 2 + 14 files changed, 440 insertions(+), 248 deletions(-) create mode 100644 arch/mn10300/kernel/fpu-nofpu-low.S create mode 100644 arch/mn10300/kernel/fpu-nofpu.c (limited to 'arch/mn10300') diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 7bd920b1c06f..a1f334ce0a36 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -140,6 +140,21 @@ config FPU default y depends on MN10300_PROC_MN103E010 +config LAZY_SAVE_FPU + bool "Save FPU state lazily" + default y + depends on FPU && !SMP + help + Enable this to be lazy in the saving of the FPU state to the owning + task's thread struct. This is useful if most tasks on the system + don't use the FPU as only those tasks that use it will pass it + between them, and the state needn't be saved for a task that isn't + using it. + + This can't be so easily used on SMP as the process that owns the FPU + state on a CPU may be currently running on another CPU, so for the + moment, it is disabled. + source "arch/mn10300/mm/Kconfig.cache" config MN10300_TLB_USE_PIDR diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h index e5fa97cd9a14..a30d220de5ca 100644 --- a/arch/mn10300/include/asm/elf.h +++ b/arch/mn10300/include/asm/elf.h @@ -47,8 +47,6 @@ typedef struct { u_int32_t fpcr; } elf_fpregset_t; -extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); - /* * This is used to ensure we don't load something for the wrong architecture */ diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h index 3f3826abc745..7d8080bc6590 100644 --- a/arch/mn10300/include/asm/exceptions.h +++ b/arch/mn10300/include/asm/exceptions.h @@ -101,7 +101,6 @@ extern asmlinkage void dtlb_aerror(void); extern asmlinkage void raw_bus_error(void); extern asmlinkage void double_fault(void); extern asmlinkage int system_call(struct pt_regs *); -extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); extern asmlinkage void nmi(struct pt_regs *, enum exception_code); extern asmlinkage void uninitialised_exception(struct pt_regs *, enum exception_code); diff --git a/arch/mn10300/include/asm/fpu.h b/arch/mn10300/include/asm/fpu.h index 64a2b83a7a6a..b7625de8eade 100644 --- a/arch/mn10300/include/asm/fpu.h +++ b/arch/mn10300/include/asm/fpu.h @@ -12,74 +12,125 @@ #ifndef _ASM_FPU_H #define _ASM_FPU_H -#include +#ifndef __ASSEMBLY__ + +#include +#include #include -#include #ifdef __KERNEL__ -/* the task that owns the FPU state */ +extern asmlinkage void fpu_disabled(void); + +#ifdef CONFIG_FPU + +#ifdef CONFIG_LAZY_SAVE_FPU +/* the task that currently owns the FPU state */ extern struct task_struct *fpu_state_owner; +#endif -#define set_using_fpu(tsk) \ -do { \ - (tsk)->thread.fpu_flags |= THREAD_USING_FPU; \ -} while (0) +#if (THREAD_USING_FPU & ~0xff) +#error THREAD_USING_FPU must be smaller than 0x100. +#endif -#define clear_using_fpu(tsk) \ -do { \ - (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU; \ -} while (0) +static inline void set_using_fpu(struct task_struct *tsk) +{ + asm volatile( + "bset %0,(0,%1)" + : + : "i"(THREAD_USING_FPU), "a"(&tsk->thread.fpu_flags) + : "memory", "cc"); +} -#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU) +static inline void clear_using_fpu(struct task_struct *tsk) +{ + asm volatile( + "bclr %0,(0,%1)" + : + : "i"(THREAD_USING_FPU), "a"(&tsk->thread.fpu_flags) + : "memory", "cc"); +} -#define unlazy_fpu(tsk) \ -do { \ - preempt_disable(); \ - if (fpu_state_owner == (tsk)) \ - fpu_save(&tsk->thread.fpu_state); \ - preempt_enable(); \ -} while (0) - -#define exit_fpu() \ -do { \ - struct task_struct *__tsk = current; \ - preempt_disable(); \ - if (fpu_state_owner == __tsk) \ - fpu_state_owner = NULL; \ - preempt_enable(); \ -} while (0) - -#define flush_fpu() \ -do { \ - struct task_struct *__tsk = current; \ - preempt_disable(); \ - if (fpu_state_owner == __tsk) { \ - fpu_state_owner = NULL; \ - __tsk->thread.uregs->epsw &= ~EPSW_FE; \ - } \ - preempt_enable(); \ - clear_using_fpu(__tsk); \ -} while (0) +#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU) -extern asmlinkage void fpu_init_state(void); extern asmlinkage void fpu_kill_state(struct task_struct *); -extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code); extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); - -#ifdef CONFIG_FPU +extern asmlinkage void fpu_invalid_op(struct pt_regs *, enum exception_code); +extern asmlinkage void fpu_init_state(void); extern asmlinkage void fpu_save(struct fpu_state_struct *); -extern asmlinkage void fpu_restore(struct fpu_state_struct *); -#else -#define fpu_save(a) -#define fpu_restore(a) -#endif /* CONFIG_FPU */ - -/* - * signal frame handlers - */ extern int fpu_setup_sigcontext(struct fpucontext *buf); extern int fpu_restore_sigcontext(struct fpucontext *buf); +static inline void unlazy_fpu(struct task_struct *tsk) +{ + preempt_disable(); +#ifndef CONFIG_LAZY_SAVE_FPU + if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { + fpu_save(&tsk->thread.fpu_state); + tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; + tsk->thread.uregs->epsw &= ~EPSW_FE; + } +#else + if (fpu_state_owner == tsk) + fpu_save(&tsk->thread.fpu_state); +#endif + preempt_enable(); +} + +static inline void exit_fpu(void) +{ +#ifdef CONFIG_LAZY_SAVE_FPU + struct task_struct *tsk = current; + + preempt_disable(); + if (fpu_state_owner == tsk) + fpu_state_owner = NULL; + preempt_enable(); +#endif +} + +static inline void flush_fpu(void) +{ + struct task_struct *tsk = current; + + preempt_disable(); +#ifndef CONFIG_LAZY_SAVE_FPU + if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { + tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; + tsk->thread.uregs->epsw &= ~EPSW_FE; + } +#else + if (fpu_state_owner == tsk) { + fpu_state_owner = NULL; + tsk->thread.uregs->epsw &= ~EPSW_FE; + } +#endif + preempt_enable(); + clear_using_fpu(tsk); +} + +#else /* CONFIG_FPU */ + +extern asmlinkage +void unexpected_fpu_exception(struct pt_regs *, enum exception_code); +#define fpu_invalid_op unexpected_fpu_exception +#define fpu_exception unexpected_fpu_exception + +struct task_struct; +struct fpu_state_struct; +static inline bool is_using_fpu(struct task_struct *tsk) { return false; } +static inline void set_using_fpu(struct task_struct *tsk) {} +static inline void clear_using_fpu(struct task_struct *tsk) {} +static inline void fpu_init_state(void) {} +static inline void fpu_save(struct fpu_state_struct *s) {} +static inline void fpu_kill_state(struct task_struct *tsk) {} +static inline void unlazy_fpu(struct task_struct *tsk) {} +static inline void exit_fpu(void) {} +static inline void flush_fpu(void) {} +static inline int fpu_setup_sigcontext(struct fpucontext *buf) { return 0; } +static inline int fpu_restore_sigcontext(struct fpucontext *buf) { return 0; } +#endif /* CONFIG_FPU */ + #endif /* __KERNEL__ */ +#endif /* !__ASSEMBLY__ */ #endif /* _ASM_FPU_H */ diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h index fd96c180e649..0032fc76c8ba 100644 --- a/arch/mn10300/include/asm/processor.h +++ b/arch/mn10300/include/asm/processor.h @@ -95,6 +95,7 @@ struct thread_struct { struct pt_regs *__frame; unsigned long fpu_flags; #define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */ +#define THREAD_HAS_FPU 0x00000002 /* T if this task owns the FPU right now */ struct fpu_state_struct fpu_state; }; diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h index 9f7c7e17c01e..3c272a1a1015 100644 --- a/arch/mn10300/include/asm/system.h +++ b/arch/mn10300/include/asm/system.h @@ -19,6 +19,21 @@ #include #include +#if !defined(CONFIG_LAZY_SAVE_FPU) +struct fpu_state_struct; +extern asmlinkage void fpu_save(struct fpu_state_struct *); +#define switch_fpu(prev, next) \ + do { \ + if ((prev)->thread.fpu_flags & THREAD_HAS_FPU) { \ + (prev)->thread.fpu_flags &= ~THREAD_HAS_FPU; \ + (prev)->thread.uregs->epsw &= ~EPSW_FE; \ + fpu_save(&(prev)->thread.fpu_state); \ + } \ + } while (0) +#else +#define switch_fpu(prev, next) do {} while (0) +#endif + struct task_struct; struct thread_struct; @@ -30,6 +45,7 @@ struct task_struct *__switch_to(struct thread_struct *prev, /* context switching is now performed out-of-line in switch_to.S */ #define switch_to(prev, next, last) \ do { \ + switch_fpu(prev, next); \ current->thread.wchan = (u_long) __builtin_return_address(0); \ (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \ mb(); \ diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile index c4289e388071..99022351717a 100644 --- a/arch/mn10300/kernel/Makefile +++ b/arch/mn10300/kernel/Makefile @@ -3,13 +3,15 @@ # extra-y := head.o init_task.o vmlinux.lds -obj-y := process.o signal.o entry.o fpu.o traps.o irq.o \ +fpu-obj-y := fpu-nofpu.o fpu-nofpu-low.o +fpu-obj-$(CONFIG_FPU) := fpu.o fpu-low.o + +obj-y := process.o signal.o entry.o traps.o irq.o \ ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \ - switch_to.o mn10300_ksyms.o kernel_execve.o + switch_to.o mn10300_ksyms.o kernel_execve.o $(fpu-obj-y) obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o -obj-$(CONFIG_FPU) += fpu-low.o obj-$(CONFIG_MN10300_TTYSM) += mn10300-serial.o mn10300-serial-low.o \ mn10300-debug.o diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c index 02dc7e461fef..78e290e342fc 100644 --- a/arch/mn10300/kernel/asm-offsets.c +++ b/arch/mn10300/kernel/asm-offsets.c @@ -67,6 +67,15 @@ void foo(void) OFFSET(THREAD_A3, thread_struct, a3); OFFSET(THREAD_USP, thread_struct, usp); OFFSET(THREAD_FRAME, thread_struct, __frame); +#ifdef CONFIG_FPU + OFFSET(THREAD_FPU_FLAGS, thread_struct, fpu_flags); + OFFSET(THREAD_FPU_STATE, thread_struct, fpu_state); + DEFINE(__THREAD_USING_FPU, THREAD_USING_FPU); + DEFINE(__THREAD_HAS_FPU, THREAD_HAS_FPU); +#endif /* CONFIG_FPU */ + BLANK(); + + OFFSET(TASK_THREAD, task_struct, thread); BLANK(); DEFINE(CLONE_VM_asm, CLONE_VM); diff --git a/arch/mn10300/kernel/fpu-low.S b/arch/mn10300/kernel/fpu-low.S index 96cfd47e68d5..78df25cfae29 100644 --- a/arch/mn10300/kernel/fpu-low.S +++ b/arch/mn10300/kernel/fpu-low.S @@ -8,25 +8,14 @@ * as published by the Free Software Foundation; either version * 2 of the Licence, or (at your option) any later version. */ +#include #include +#include +#include +#include +#include -############################################################################### -# -# void fpu_init_state(void) -# - initialise the FPU -# -############################################################################### - .globl fpu_init_state - .type fpu_init_state,@function -fpu_init_state: - mov epsw,d0 - or EPSW_FE,epsw - -#ifdef CONFIG_MN10300_PROC_MN103E010 - nop - nop - nop -#endif +.macro FPU_INIT_STATE_ALL fmov 0,fs0 fmov fs0,fs1 fmov fs0,fs2 @@ -60,7 +49,100 @@ fpu_init_state: fmov fs0,fs30 fmov fs0,fs31 fmov FPCR_INIT,fpcr +.endm + +.macro FPU_SAVE_ALL areg,dreg + fmov fs0,(\areg+) + fmov fs1,(\areg+) + fmov fs2,(\areg+) + fmov fs3,(\areg+) + fmov fs4,(\areg+) + fmov fs5,(\areg+) + fmov fs6,(\areg+) + fmov fs7,(\areg+) + fmov fs8,(\areg+) + fmov fs9,(\areg+) + fmov fs10,(\areg+) + fmov fs11,(\areg+) + fmov fs12,(\areg+) + fmov fs13,(\areg+) + fmov fs14,(\areg+) + fmov fs15,(\areg+) + fmov fs16,(\areg+) + fmov fs17,(\areg+) + fmov fs18,(\areg+) + fmov fs19,(\areg+) + fmov fs20,(\areg+) + fmov fs21,(\areg+) + fmov fs22,(\areg+) + fmov fs23,(\areg+) + fmov fs24,(\areg+) + fmov fs25,(\areg+) + fmov fs26,(\areg+) + fmov fs27,(\areg+) + fmov fs28,(\areg+) + fmov fs29,(\areg+) + fmov fs30,(\areg+) + fmov fs31,(\areg+) + fmov fpcr,\dreg + mov \dreg,(\areg) +.endm + +.macro FPU_RESTORE_ALL areg,dreg + fmov (\areg+),fs0 + fmov (\areg+),fs1 + fmov (\areg+),fs2 + fmov (\areg+),fs3 + fmov (\areg+),fs4 + fmov (\areg+),fs5 + fmov (\areg+),fs6 + fmov (\areg+),fs7 + fmov (\areg+),fs8 + fmov (\areg+),fs9 + fmov (\areg+),fs10 + fmov (\areg+),fs11 + fmov (\areg+),fs12 + fmov (\areg+),fs13 + fmov (\areg+),fs14 + fmov (\areg+),fs15 + fmov (\areg+),fs16 + fmov (\areg+),fs17 + fmov (\areg+),fs18 + fmov (\areg+),fs19 + fmov (\areg+),fs20 + fmov (\areg+),fs21 + fmov (\areg+),fs22 + fmov (\areg+),fs23 + fmov (\areg+),fs24 + fmov (\areg+),fs25 + fmov (\areg+),fs26 + fmov (\areg+),fs27 + fmov (\areg+),fs28 + fmov (\areg+),fs29 + fmov (\areg+),fs30 + fmov (\areg+),fs31 + mov (\areg),\dreg + fmov \dreg,fpcr +.endm +############################################################################### +# +# void fpu_init_state(void) +# - initialise the FPU +# +############################################################################### + .globl fpu_init_state + .type fpu_init_state,@function +fpu_init_state: + mov epsw,d0 + or EPSW_FE,epsw + +#ifdef CONFIG_MN10300_PROC_MN103E010 + nop + nop + nop +#endif + FPU_INIT_STATE_ALL #ifdef CONFIG_MN10300_PROC_MN103E010 nop nop @@ -89,40 +171,7 @@ fpu_save: nop #endif mov d0,a0 - fmov fs0,(a0+) - fmov fs1,(a0+) - fmov fs2,(a0+) - fmov fs3,(a0+) - fmov fs4,(a0+) - fmov fs5,(a0+) - fmov fs6,(a0+) - fmov fs7,(a0+) - fmov fs8,(a0+) - fmov fs9,(a0+) - fmov fs10,(a0+) - fmov fs11,(a0+) - fmov fs12,(a0+) - fmov fs13,(a0+) - fmov fs14,(a0+) - fmov fs15,(a0+) - fmov fs16,(a0+) - fmov fs17,(a0+) - fmov fs18,(a0+) - fmov fs19,(a0+) - fmov fs20,(a0+) - fmov fs21,(a0+) - fmov fs22,(a0+) - fmov fs23,(a0+) - fmov fs24,(a0+) - fmov fs25,(a0+) - fmov fs26,(a0+) - fmov fs27,(a0+) - fmov fs28,(a0+) - fmov fs29,(a0+) - fmov fs30,(a0+) - fmov fs31,(a0+) - fmov fpcr,d0 - mov d0,(a0) + FPU_SAVE_ALL a0,d0 #ifdef CONFIG_MN10300_PROC_MN103E010 nop nop @@ -135,63 +184,75 @@ fpu_save: ############################################################################### # -# void fpu_restore(struct fpu_state_struct *) -# - restore the fpu state -# - note that an FPU Operational exception might occur during this process +# void fpu_disabled(void) +# - handle an exception due to the FPU being disabled +# when CONFIG_FPU is enabled # ############################################################################### - .globl fpu_restore - .type fpu_restore,@function -fpu_restore: - mov epsw,d1 - or EPSW_FE,epsw /* enable the FPU so we can access it */ - -#ifdef CONFIG_MN10300_PROC_MN103E010 + .type fpu_disabled,@function + .globl fpu_disabled +fpu_disabled: + or EPSW_nAR|EPSW_FE,epsw nop nop -#endif - mov d0,a0 - fmov (a0+),fs0 - fmov (a0+),fs1 - fmov (a0+),fs2 - fmov (a0+),fs3 - fmov (a0+),fs4 - fmov (a0+),fs5 - fmov (a0+),fs6 - fmov (a0+),fs7 - fmov (a0+),fs8 - fmov (a0+),fs9 - fmov (a0+),fs10 - fmov (a0+),fs11 - fmov (a0+),fs12 - fmov (a0+),fs13 - fmov (a0+),fs14 - fmov (a0+),fs15 - fmov (a0+),fs16 - fmov (a0+),fs17 - fmov (a0+),fs18 - fmov (a0+),fs19 - fmov (a0+),fs20 - fmov (a0+),fs21 - fmov (a0+),fs22 - fmov (a0+),fs23 - fmov (a0+),fs24 - fmov (a0+),fs25 - fmov (a0+),fs26 - fmov (a0+),fs27 - fmov (a0+),fs28 - fmov (a0+),fs29 - fmov (a0+),fs30 - fmov (a0+),fs31 - mov (a0),d0 - fmov d0,fpcr -#ifdef CONFIG_MN10300_PROC_MN103E010 nop + + mov sp,a1 + mov (a1),d1 /* get epsw of user context */ + and ~(THREAD_SIZE-1),a1 /* a1: (thread_info *ti) */ + mov (TI_task,a1),a2 /* a2: (task_struct *tsk) */ + btst EPSW_nSL,d1 + beq fpu_used_in_kernel + + or EPSW_FE,d1 + mov d1,(sp) + mov (TASK_THREAD+THREAD_FPU_FLAGS,a2),d1 +#ifndef CONFIG_LAZY_SAVE_FPU + or __THREAD_HAS_FPU,d1 + mov d1,(TASK_THREAD+THREAD_FPU_FLAGS,a2) +#else /* !CONFIG_LAZY_SAVE_FPU */ + mov (fpu_state_owner),a0 + cmp 0,a0 + beq fpu_regs_save_end + + mov (TASK_THREAD+THREAD_UREGS,a0),a1 + add TASK_THREAD+THREAD_FPU_STATE,a0 + FPU_SAVE_ALL a0,d0 + + mov (REG_EPSW,a1),d0 + and ~EPSW_FE,d0 + mov d0,(REG_EPSW,a1) + +fpu_regs_save_end: + mov a2,(fpu_state_owner) +#endif /* !CONFIG_LAZY_SAVE_FPU */ + + btst __THREAD_USING_FPU,d1 + beq fpu_regs_init + add TASK_THREAD+THREAD_FPU_STATE,a2 + FPU_RESTORE_ALL a2,d0 + rti + +fpu_regs_init: + FPU_INIT_STATE_ALL + add TASK_THREAD+THREAD_FPU_FLAGS,a2 + bset __THREAD_USING_FPU,(0,a2) + rti + +fpu_used_in_kernel: + and ~(EPSW_nAR|EPSW_FE),epsw nop nop -#endif - mov d1,epsw - ret [],0 + add -4,sp + SAVE_ALL + mov -1,d0 + mov d0,(REG_ORIG_D0,fp) + + and ~EPSW_NMID,epsw + + mov fp,d0 + call fpu_disabled_in_kernel[],0 + jmp ret_from_exception - .size fpu_restore,.-fpu_restore + .size fpu_disabled,.-fpu_disabled diff --git a/arch/mn10300/kernel/fpu-nofpu-low.S b/arch/mn10300/kernel/fpu-nofpu-low.S new file mode 100644 index 000000000000..7ea087a549f4 --- /dev/null +++ b/arch/mn10300/kernel/fpu-nofpu-low.S @@ -0,0 +1,39 @@ +/* MN10300 Low level FPU management operations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include + +############################################################################### +# +# void fpu_disabled(void) +# - handle an exception due to the FPU being disabled +# when CONFIG_FPU is disabled +# +############################################################################### + .type fpu_disabled,@function + .globl fpu_disabled +fpu_disabled: + add -4,sp + SAVE_ALL + mov -1,d0 + mov d0,(REG_ORIG_D0,fp) + + and ~EPSW_NMID,epsw + + mov fp,d0 + call unexpected_fpu_exception[],0 + jmp ret_from_exception + + .size fpu_disabled,.-fpu_disabled diff --git a/arch/mn10300/kernel/fpu-nofpu.c b/arch/mn10300/kernel/fpu-nofpu.c new file mode 100644 index 000000000000..31c765b92c5d --- /dev/null +++ b/arch/mn10300/kernel/fpu-nofpu.c @@ -0,0 +1,30 @@ +/* MN10300 FPU management + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include + +/* + * handle an FPU operational exception + * - there's a possibility that if the FPU is asynchronous, the signal might + * be meant for a process other than the current one + */ +asmlinkage +void unexpected_fpu_exception(struct pt_regs *regs, enum exception_code code) +{ + panic("An FPU exception was received, but there's no FPU enabled."); +} + +/* + * fill in the FPU structure for a core dump + */ +int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpreg) +{ + return 0; /* not valid */ +} diff --git a/arch/mn10300/kernel/fpu.c b/arch/mn10300/kernel/fpu.c index e705f25ad5ff..5f9c3fa19a85 100644 --- a/arch/mn10300/kernel/fpu.c +++ b/arch/mn10300/kernel/fpu.c @@ -12,56 +12,19 @@ #include #include #include +#include +#ifdef CONFIG_LAZY_SAVE_FPU struct task_struct *fpu_state_owner; +#endif /* - * handle an exception due to the FPU being disabled + * error functions in FPU disabled exception */ -asmlinkage void fpu_disabled(struct pt_regs *regs, enum exception_code code) +asmlinkage void fpu_disabled_in_kernel(struct pt_regs *regs) { - struct task_struct *tsk = current; - - if (!user_mode(regs)) - die_if_no_fixup("An FPU Disabled exception happened in" - " kernel space\n", - regs, code); - -#ifdef CONFIG_FPU - preempt_disable(); - - /* transfer the last process's FPU state to memory */ - if (fpu_state_owner) { - fpu_save(&fpu_state_owner->thread.fpu_state); - fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE; - } - - /* the current process now owns the FPU state */ - fpu_state_owner = tsk; - regs->epsw |= EPSW_FE; - - /* load the FPU with the current process's FPU state or invent a new - * clean one if the process doesn't have one */ - if (is_using_fpu(tsk)) { - fpu_restore(&tsk->thread.fpu_state); - } else { - fpu_init_state(); - set_using_fpu(tsk); - } - - preempt_enable(); -#else - { - siginfo_t info; - - info.si_signo = SIGFPE; - info.si_errno = 0; - info.si_addr = (void *) tsk->thread.uregs->pc; - info.si_code = FPE_FLTINV; - - force_sig_info(SIGFPE, &info, tsk); - } -#endif /* CONFIG_FPU */ + die_if_no_fixup("An FPU Disabled exception happened in kernel space\n", + regs, EXCEP_FPU_DISABLED); } /* @@ -71,15 +34,16 @@ asmlinkage void fpu_disabled(struct pt_regs *regs, enum exception_code code) */ asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code) { - struct task_struct *tsk = fpu_state_owner; + struct task_struct *tsk = current; siginfo_t info; + u32 fpcr; if (!user_mode(regs)) die_if_no_fixup("An FPU Operation exception happened in" " kernel space\n", regs, code); - if (!tsk) + if (!is_using_fpu(tsk)) die_if_no_fixup("An FPU Operation exception happened," " but the FPU is not in use", regs, code); @@ -89,48 +53,45 @@ asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code) info.si_addr = (void *) tsk->thread.uregs->pc; info.si_code = FPE_FLTINV; -#ifdef CONFIG_FPU - { - u32 fpcr; + unlazy_fpu(tsk); - /* get FPCR (we need to enable the FPU whilst we do this) */ - asm volatile(" or %1,epsw \n" -#ifdef CONFIG_MN10300_PROC_MN103E010 - " nop \n" - " nop \n" - " nop \n" -#endif - " fmov fpcr,%0 \n" -#ifdef CONFIG_MN10300_PROC_MN103E010 - " nop \n" - " nop \n" - " nop \n" -#endif - " and %2,epsw \n" - : "=&d"(fpcr) - : "i"(EPSW_FE), "i"(~EPSW_FE) - ); - - if (fpcr & FPCR_EC_Z) - info.si_code = FPE_FLTDIV; - else if (fpcr & FPCR_EC_O) - info.si_code = FPE_FLTOVF; - else if (fpcr & FPCR_EC_U) - info.si_code = FPE_FLTUND; - else if (fpcr & FPCR_EC_I) - info.si_code = FPE_FLTRES; - } -#endif + fpcr = tsk->thread.fpu_state.fpcr; + + if (fpcr & FPCR_EC_Z) + info.si_code = FPE_FLTDIV; + else if (fpcr & FPCR_EC_O) + info.si_code = FPE_FLTOVF; + else if (fpcr & FPCR_EC_U) + info.si_code = FPE_FLTUND; + else if (fpcr & FPCR_EC_I) + info.si_code = FPE_FLTRES; force_sig_info(SIGFPE, &info, tsk); } +/* + * handle an FPU invalid_op exception + * - Derived from DO_EINFO() macro in arch/mn10300/kernel/traps.c + */ +asmlinkage void fpu_invalid_op(struct pt_regs *regs, enum exception_code code) +{ + siginfo_t info; + + if (!user_mode(regs)) + die_if_no_fixup("FPU invalid opcode", regs, code); + + info.si_signo = SIGILL; + info.si_errno = 0; + info.si_code = ILL_COPROC; + info.si_addr = (void *) regs->pc; + force_sig_info(info.si_signo, &info, current); +} + /* * save the FPU state to a signal context */ int fpu_setup_sigcontext(struct fpucontext *fpucontext) { -#ifdef CONFIG_FPU struct task_struct *tsk = current; if (!is_using_fpu(tsk)) @@ -142,11 +103,19 @@ int fpu_setup_sigcontext(struct fpucontext *fpucontext) */ preempt_disable(); +#ifndef CONFIG_LAZY_SAVE_FPU + if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { + fpu_save(&tsk->thread.fpu_state); + tsk->thread.uregs->epsw &= ~EPSW_FE; + tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; + } +#else /* !CONFIG_LAZY_SAVE_FPU */ if (fpu_state_owner == tsk) { fpu_save(&tsk->thread.fpu_state); fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE; fpu_state_owner = NULL; } +#endif /* !CONFIG_LAZY_SAVE_FPU */ preempt_enable(); @@ -161,9 +130,6 @@ int fpu_setup_sigcontext(struct fpucontext *fpucontext) return -1; return 1; -#else - return 0; -#endif } /* @@ -171,17 +137,23 @@ int fpu_setup_sigcontext(struct fpucontext *fpucontext) */ void fpu_kill_state(struct task_struct *tsk) { -#ifdef CONFIG_FPU /* disown anything left in the FPU */ preempt_disable(); +#ifndef CONFIG_LAZY_SAVE_FPU + if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { + tsk->thread.uregs->epsw &= ~EPSW_FE; + tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; + } +#else /* !CONFIG_LAZY_SAVE_FPU */ if (fpu_state_owner == tsk) { fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE; fpu_state_owner = NULL; } +#endif /* !CONFIG_LAZY_SAVE_FPU */ preempt_enable(); -#endif + /* we no longer have a valid current FPU state */ clear_using_fpu(tsk); } @@ -195,8 +167,7 @@ int fpu_restore_sigcontext(struct fpucontext *fpucontext) int ret; /* load up the old FPU state */ - ret = copy_from_user(&tsk->thread.fpu_state, - fpucontext, + ret = copy_from_user(&tsk->thread.fpu_state, fpucontext, min(sizeof(struct fpu_state_struct), sizeof(struct fpucontext))); if (!ret) diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index c7257a1304a9..716a221df2f9 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -101,7 +101,6 @@ DO_EINFO(SIGILL, {}, "invalid opcode", invalid_op, ILL_ILLOPC); DO_EINFO(SIGILL, {}, "invalid ex opcode", invalid_exop, ILL_ILLOPC); DO_EINFO(SIGBUS, {}, "invalid address", mem_error, BUS_ADRERR); DO_EINFO(SIGBUS, {}, "bus error", bus_error, BUS_ADRERR); -DO_EINFO(SIGILL, {}, "FPU invalid opcode", fpu_invalid_op, ILL_COPROC); DO_ERROR(SIGTRAP, #ifndef CONFIG_MN10300_USING_JTAG @@ -561,7 +560,6 @@ void __init trap_init(void) set_excp_vector(EXCEP_PRIVINSACC, insn_acc_error); set_excp_vector(EXCEP_PRIVDATACC, data_acc_error); set_excp_vector(EXCEP_DATINSACC, insn_acc_error); - set_excp_vector(EXCEP_FPU_DISABLED, fpu_disabled); set_excp_vector(EXCEP_FPU_UNIMPINS, fpu_invalid_op); set_excp_vector(EXCEP_FPU_OPERATION, fpu_exception); diff --git a/arch/mn10300/proc-mn103e010/proc-init.c b/arch/mn10300/proc-mn103e010/proc-init.c index 9a482efafa82..0cee7878bee9 100644 --- a/arch/mn10300/proc-mn103e010/proc-init.c +++ b/arch/mn10300/proc-mn103e010/proc-init.c @@ -9,6 +9,7 @@ * 2 of the Licence, or (at your option) any later version. */ #include +#include #include /* @@ -28,6 +29,7 @@ asmlinkage void __init processor_init(void) __set_intr_stub(EXCEP_DAERROR, dtlb_aerror); __set_intr_stub(EXCEP_BUSERROR, raw_bus_error); __set_intr_stub(EXCEP_DOUBLE_FAULT, double_fault); + __set_intr_stub(EXCEP_FPU_DISABLED, fpu_disabled); __set_intr_stub(EXCEP_SYSCALL0, system_call); __set_intr_stub(EXCEP_NMI, nmi_handler); -- cgit v1.2.3 From 4f81ca13532981192c83da95ed8c8cb285817d99 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 27 Oct 2010 17:28:52 +0100 Subject: MN10300: Implement atomic ops using atomic ops unit Implement atomic ops using the atomic ops unit available in the AM34 CPU. This allows the equivalent of the LL/SC instructions to be found on other CPUs. Signed-off-by: Mark Salter Signed-off-by: David Howells --- arch/mn10300/include/asm/atomic.h | 350 ++++++++++++++++++++++++++++++++++++++ arch/mn10300/include/asm/system.h | 48 +----- 2 files changed, 351 insertions(+), 47 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h index f0cc1f84a72f..92d2f9298e38 100644 --- a/arch/mn10300/include/asm/atomic.h +++ b/arch/mn10300/include/asm/atomic.h @@ -1 +1,351 @@ +/* MN10300 Atomic counter operations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_ATOMIC_H +#define _ASM_ATOMIC_H + +#include + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_SMP +#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT +static inline +unsigned long __xchg(volatile unsigned long *m, unsigned long val) +{ + unsigned long status; + unsigned long oldval; + + asm volatile( + "1: mov %4,(_AAR,%3) \n" + " mov (_ADR,%3),%1 \n" + " mov %5,(_ADR,%3) \n" + " mov (_ADR,%3),%0 \n" /* flush */ + " mov (_ASR,%3),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=&r"(oldval), "=m"(*m) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(m), "r"(val) + : "memory", "cc"); + + return oldval; +} + +static inline unsigned long __cmpxchg(volatile unsigned long *m, + unsigned long old, unsigned long new) +{ + unsigned long status; + unsigned long oldval; + + asm volatile( + "1: mov %4,(_AAR,%3) \n" + " mov (_ADR,%3),%1 \n" + " cmp %5,%1 \n" + " bne 2f \n" + " mov %6,(_ADR,%3) \n" + "2: mov (_ADR,%3),%0 \n" /* flush */ + " mov (_ASR,%3),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=&r"(oldval), "=m"(*m) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(m), + "r"(old), "r"(new) + : "memory", "cc"); + + return oldval; +} +#else /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */ +#error "No SMP atomic operation support!" +#endif /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */ + +#else /* CONFIG_SMP */ + +/* + * Emulate xchg for non-SMP MN10300 + */ +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((struct __xchg_dummy *)(x)) + +static inline +unsigned long __xchg(volatile unsigned long *m, unsigned long val) +{ + unsigned long oldval; + unsigned long flags; + + flags = arch_local_cli_save(); + oldval = *m; + *m = val; + arch_local_irq_restore(flags); + return oldval; +} + +/* + * Emulate cmpxchg for non-SMP MN10300 + */ +static inline unsigned long __cmpxchg(volatile unsigned long *m, + unsigned long old, unsigned long new) +{ + unsigned long oldval; + unsigned long flags; + + flags = arch_local_cli_save(); + oldval = *m; + if (oldval == old) + *m = new; + arch_local_irq_restore(flags); + return oldval; +} + +#endif /* CONFIG_SMP */ + +#define xchg(ptr, v) \ + ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \ + (unsigned long)(v))) + +#define cmpxchg(ptr, o, n) \ + ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \ + (unsigned long)(o), \ + (unsigned long)(n))) + +#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v))) +#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new))) + +#endif /* !__ASSEMBLY__ */ + +#ifndef CONFIG_SMP #include +#else + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +#define ATOMIC_INIT(i) { (i) } + +#ifdef __KERNEL__ + +/** + * atomic_read - read atomic variable + * @v: pointer of type atomic_t + * + * Atomically reads the value of @v. Note that the guaranteed + * useful range of an atomic_t is only 24 bits. + */ +#define atomic_read(v) ((v)->counter) + +/** + * atomic_set - set atomic variable + * @v: pointer of type atomic_t + * @i: required value + * + * Atomically sets the value of @v to @i. Note that the guaranteed + * useful range of an atomic_t is only 24 bits. + */ +#define atomic_set(v, i) (((v)->counter) = (i)) + +/** + * atomic_add_return - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v and returns the result + * Note that the guaranteed useful range of an atomic_t is only 24 bits. + */ +static inline int atomic_add_return(int i, atomic_t *v) +{ + int retval; +#ifdef CONFIG_SMP + int status; + + asm volatile( + "1: mov %4,(_AAR,%3) \n" + " mov (_ADR,%3),%1 \n" + " add %5,%1 \n" + " mov %1,(_ADR,%3) \n" + " mov (_ADR,%3),%0 \n" /* flush */ + " mov (_ASR,%3),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=&r"(retval), "=m"(v->counter) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i) + : "memory", "cc"); + +#else + unsigned long flags; + + flags = arch_local_cli_save(); + retval = v->counter; + retval += i; + v->counter = retval; + arch_local_irq_restore(flags); +#endif + return retval; +} + +/** + * atomic_sub_return - subtract integer from atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v and returns the result + * Note that the guaranteed useful range of an atomic_t is only 24 bits. + */ +static inline int atomic_sub_return(int i, atomic_t *v) +{ + int retval; +#ifdef CONFIG_SMP + int status; + + asm volatile( + "1: mov %4,(_AAR,%3) \n" + " mov (_ADR,%3),%1 \n" + " sub %5,%1 \n" + " mov %1,(_ADR,%3) \n" + " mov (_ADR,%3),%0 \n" /* flush */ + " mov (_ASR,%3),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=&r"(retval), "=m"(v->counter) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i) + : "memory", "cc"); + +#else + unsigned long flags; + flags = arch_local_cli_save(); + retval = v->counter; + retval -= i; + v->counter = retval; + arch_local_irq_restore(flags); +#endif + return retval; +} + +static inline int atomic_add_negative(int i, atomic_t *v) +{ + return atomic_add_return(i, v) < 0; +} + +static inline void atomic_add(int i, atomic_t *v) +{ + atomic_add_return(i, v); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + atomic_sub_return(i, v); +} + +static inline void atomic_inc(atomic_t *v) +{ + atomic_add_return(1, v); +} + +static inline void atomic_dec(atomic_t *v) +{ + atomic_sub_return(1, v); +} + +#define atomic_dec_return(v) atomic_sub_return(1, (v)) +#define atomic_inc_return(v) atomic_add_return(1, (v)) + +#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) +#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +/** + * atomic_clear_mask - Atomically clear bits in memory + * @mask: Mask of the bits to be cleared + * @v: pointer to word in memory + * + * Atomically clears the bits set in mask from the memory word specified. + */ +static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) +{ +#ifdef CONFIG_SMP + int status; + + asm volatile( + "1: mov %3,(_AAR,%2) \n" + " mov (_ADR,%2),%0 \n" + " and %4,%0 \n" + " mov %0,(_ADR,%2) \n" + " mov (_ADR,%2),%0 \n" /* flush */ + " mov (_ASR,%2),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=m"(*addr) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(addr), "r"(~mask) + : "memory", "cc"); +#else + unsigned long flags; + + mask = ~mask; + flags = arch_local_cli_save(); + *addr &= mask; + arch_local_irq_restore(flags); +#endif +} + +/** + * atomic_set_mask - Atomically set bits in memory + * @mask: Mask of the bits to be set + * @v: pointer to word in memory + * + * Atomically sets the bits set in mask from the memory word specified. + */ +static inline void atomic_set_mask(unsigned long mask, unsigned long *addr) +{ +#ifdef CONFIG_SMP + int status; + + asm volatile( + "1: mov %3,(_AAR,%2) \n" + " mov (_ADR,%2),%0 \n" + " or %4,%0 \n" + " mov %0,(_ADR,%2) \n" + " mov (_ADR,%2),%0 \n" /* flush */ + " mov (_ASR,%2),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=m"(*addr) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(addr), "r"(mask) + : "memory", "cc"); +#else + unsigned long flags; + + flags = arch_local_cli_save(); + *addr |= mask; + arch_local_irq_restore(flags); +#endif +} + +/* Atomic operations are already serializing on MN10300??? */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include + +#endif /* __KERNEL__ */ +#endif /* CONFIG_SMP */ +#endif /* _ASM_ATOMIC_H */ diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h index 3c272a1a1015..7de90bc4cf80 100644 --- a/arch/mn10300/include/asm/system.h +++ b/arch/mn10300/include/asm/system.h @@ -18,6 +18,7 @@ #include #include +#include #if !defined(CONFIG_LAZY_SAVE_FPU) struct fpu_state_struct; @@ -96,52 +97,5 @@ do { \ #define read_barrier_depends() do {} while (0) #define smp_read_barrier_depends() do {} while (0) -/*****************************************************************************/ -/* - * MN10300 doesn't actually have an exchange instruction - */ -#ifndef __ASSEMBLY__ - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((struct __xchg_dummy *)(x)) - -static inline -unsigned long __xchg(volatile unsigned long *m, unsigned long val) -{ - unsigned long retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - *m = val; - local_irq_restore(flags); - return retval; -} - -#define xchg(ptr, v) \ - ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \ - (unsigned long)(v))) - -static inline unsigned long __cmpxchg(volatile unsigned long *m, - unsigned long old, unsigned long new) -{ - unsigned long retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - if (retval == old) - *m = new; - local_irq_restore(flags); - return retval; -} - -#define cmpxchg(ptr, o, n) \ - ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \ - (unsigned long)(o), \ - (unsigned long)(n))) - -#endif /* !__ASSEMBLY__ */ - #endif /* __KERNEL__ */ #endif /* _ASM_SYSTEM_H */ -- cgit v1.2.3 From ab244c1a08a4e234cd3761a8aba3cb5a7bbe525a Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:53 +0100 Subject: MN10300: Optimise do_csum() Optimise do_csum() to gang up the loads so they're less likely to get interruptions between. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/lib/do_csum.S | 49 +++++++++++++++++++++------------------------- 1 file changed, 22 insertions(+), 27 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/lib/do_csum.S b/arch/mn10300/lib/do_csum.S index e138994e1667..1d27bba0cd8f 100644 --- a/arch/mn10300/lib/do_csum.S +++ b/arch/mn10300/lib/do_csum.S @@ -10,26 +10,25 @@ */ #include - .section .text - .balign L1_CACHE_BYTES + .section .text + .balign L1_CACHE_BYTES ############################################################################### # -# unsigned int do_csum(const unsigned char *buff, size_t len) +# unsigned int do_csum(const unsigned char *buff, int len) # ############################################################################### .globl do_csum - .type do_csum,@function + .type do_csum,@function do_csum: movm [d2,d3],(sp) - mov d0,(12,sp) - mov d1,(16,sp) mov d1,d2 # count mov d0,a0 # buff + mov a0,a1 clr d1 # accumulator cmp +0,d2 - beq do_csum_done # return if zero-length buffer + ble do_csum_done # check for zero length or negative # 4-byte align the buffer pointer btst +3,a0 @@ -41,17 +40,15 @@ do_csum: inc a0 asl +8,d0 add d0,d1 - addc +0,d1 add -1,d2 -do_csum_addr_not_odd: +do_csum_addr_not_odd: cmp +2,d2 bcs do_csum_fewer_than_4 btst +2,a0 beq do_csum_now_4b_aligned movhu (a0+),d0 add d0,d1 - addc +0,d1 add -2,d2 cmp +4,d2 bcs do_csum_fewer_than_4 @@ -66,20 +63,20 @@ do_csum_now_4b_aligned: do_csum_loop: mov (a0+),d0 - add d0,d1 mov (a0+),e0 - addc e0,d1 mov (a0+),e1 - addc e1,d1 mov (a0+),e3 + add d0,d1 + addc e0,d1 + addc e1,d1 addc e3,d1 mov (a0+),d0 - addc d0,d1 mov (a0+),e0 - addc e0,d1 mov (a0+),e1 - addc e1,d1 mov (a0+),e3 + addc d0,d1 + addc e0,d1 + addc e1,d1 addc e3,d1 addc +0,d1 @@ -94,12 +91,12 @@ do_csum_remainder: cmp +16,d2 bcs do_csum_fewer_than_16 mov (a0+),d0 - add d0,d1 mov (a0+),e0 - addc e0,d1 mov (a0+),e1 - addc e1,d1 mov (a0+),e3 + add d0,d1 + addc e0,d1 + addc e1,d1 addc e3,d1 addc +0,d1 add -16,d2 @@ -131,9 +128,9 @@ do_csum_fewer_than_4: xor_cmp d0,d0,+2,d2 bcs do_csum_fewer_than_2 movhu (a0+),d0 -do_csum_fewer_than_2: and +1,d2 beq do_csum_add_last_bit +do_csum_fewer_than_2: movbu (a0),d3 add d3,d0 do_csum_add_last_bit: @@ -142,21 +139,19 @@ do_csum_add_last_bit: do_csum_done: # compress the checksum down to 16 bits - mov +0xffff0000,d2 - and d1,d2 + mov +0xffff0000,d0 + and d1,d0 asl +16,d1 - add d2,d1,d0 + add d1,d0 addc +0xffff,d0 lsr +16,d0 # flip the halves of the word result if the buffer was oddly aligned - mov (12,sp),d1 - and +1,d1 + and +1,a1 beq do_csum_not_oddly_aligned swaph d0,d0 # exchange bits 15:8 with 7:0 do_csum_not_oddly_aligned: ret [d2,d3],8 -do_csum_end: - .size do_csum, do_csum_end-do_csum + .size do_csum, .-do_csum -- cgit v1.2.3 From 37e4ec96365a4b1179b994861e824e3c2fce32a1 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:54 +0100 Subject: MN10300: Make various interrupt priority settings configurable Make the settings of interrupt priorities used by various services configurable at run time. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/Kconfig | 74 +++++++++++++++++++++++++++++++++++++ arch/mn10300/include/asm/irqflags.h | 8 +--- 2 files changed, 76 insertions(+), 6 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index a1f334ce0a36..a0a16e6e4a4e 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -351,6 +351,80 @@ config MN10300_TTYSM2_CTS endmenu +menu "Interrupt request priority options" + +comment "[!] NOTE: A lower number/level indicates a higher priority (0 is highest, 6 is lowest)" + +comment "____Non-maskable interrupt levels____" +comment "The following must be set to a higher priority than local_irq_disable() and on-chip serial" + +config GDBSTUB_IRQ_LEVEL + int "GDBSTUB interrupt priority" + depends on GDBSTUB + range 0 1 if LINUX_CLI_LEVEL = 2 + range 0 2 if LINUX_CLI_LEVEL = 3 + range 0 3 if LINUX_CLI_LEVEL = 4 + range 0 4 if LINUX_CLI_LEVEL = 5 + range 0 5 if LINUX_CLI_LEVEL = 6 + default 0 + +comment "The following must be set to a higher priority than local_irq_disable()" + +config MN10300_SERIAL_IRQ_LEVEL + int "MN10300 on-chip serial interrupt priority" + depends on MN10300_TTYSM + range 1 1 if LINUX_CLI_LEVEL = 2 + range 1 2 if LINUX_CLI_LEVEL = 3 + range 1 3 if LINUX_CLI_LEVEL = 4 + range 1 4 if LINUX_CLI_LEVEL = 5 + range 1 5 if LINUX_CLI_LEVEL = 6 + default 1 + +comment "-" +comment "____Maskable interrupt levels____" + +config LINUX_CLI_LEVEL + int "The highest interrupt priority excluded by local_irq_disable() (2-6)" + range 2 6 + default 2 + help + local_irq_disable() doesn't actually disable maskable interrupts - + what it does is restrict the levels of interrupt which are permitted + (a lower level indicates a higher priority) by lowering the value in + EPSW.IM from 7. Any interrupt is permitted for which the level is + lower than EPSW.IM. + + Certain interrupts, such as GDBSTUB and virtual MN10300 on-chip + serial DMA interrupts are allowed to interrupt normal disabled + sections. + +comment "The following must be set to a equal to or lower priority than LINUX_CLI_LEVEL" + +config TIMER_IRQ_LEVEL + int "Kernel timer interrupt priority" + range LINUX_CLI_LEVEL 6 + default 4 + +config PCI_IRQ_LEVEL + int "PCI interrupt priority" + depends on PCI + range LINUX_CLI_LEVEL 6 + default 5 + +config ETHERNET_IRQ_LEVEL + int "Ethernet interrupt priority" + depends on SMC91X || SMC911X || SMSC911X + range LINUX_CLI_LEVEL 6 + default 6 + +config EXT_SERIAL_IRQ_LEVEL + int "External serial port interrupt priority" + depends on SERIAL_8250 + range LINUX_CLI_LEVEL 6 + default 6 + +endmenu + source "mm/Kconfig" menu "Power management options" diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h index f1b64b256060..b3ab2071354d 100644 --- a/arch/mn10300/include/asm/irqflags.h +++ b/arch/mn10300/include/asm/irqflags.h @@ -23,11 +23,7 @@ * - level 6 - timer interrupt * - "enabled": run in IM7 */ -#ifdef CONFIG_MN10300_TTYSM -#define MN10300_CLI_LEVEL EPSW_IM_2 -#else -#define MN10300_CLI_LEVEL EPSW_IM_1 -#endif +#define MN10300_CLI_LEVEL (CONFIG_LINUX_CLI_LEVEL << EPSW_IM_SHIFT) #ifndef __ASSEMBLY__ @@ -94,7 +90,7 @@ static inline void arch_local_irq_restore(unsigned long flags) static inline bool arch_irqs_disabled_flags(unsigned long flags) { - return (flags & EPSW_IM) <= MN10300_CLI_LEVEL; + return (flags & (EPSW_IE | EPSW_IM)) != (EPSW_IE | EPSW_IM_7); } static inline bool arch_irqs_disabled(void) -- cgit v1.2.3 From 04157a6e7df99fd5ed64955233d6e00ab6613614 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:54 +0100 Subject: MN10300: Delete idle_timestamp from irq_cpustat_t Delete idle_timestamp from irq_cpustat_t as it's an unread relic. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/include/asm/hardirq.h | 1 - arch/mn10300/kernel/process.c | 2 -- 2 files changed, 3 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/hardirq.h b/arch/mn10300/include/asm/hardirq.h index 54d950117674..7bd9b7cc2451 100644 --- a/arch/mn10300/include/asm/hardirq.h +++ b/arch/mn10300/include/asm/hardirq.h @@ -19,7 +19,6 @@ /* assembly code in softirq.h is sensitive to the offsets of these fields */ typedef struct { unsigned int __softirq_pending; - unsigned long idle_timestamp; unsigned int __nmi_count; /* arch dependent */ unsigned int __irq_count; /* arch dependent */ } ____cacheline_aligned irq_cpustat_t; diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c index f48373e2bc1c..243e33cd874b 100644 --- a/arch/mn10300/kernel/process.c +++ b/arch/mn10300/kernel/process.c @@ -88,8 +88,6 @@ void cpu_idle(void) idle = pm_idle; if (!idle) idle = default_idle; - - irq_stat[cpu].idle_timestamp = jiffies; idle(); } -- cgit v1.2.3 From 368dd5acd154b09c043cc4392a74da01599b37d5 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:55 +0100 Subject: MN10300: And Panasonic AM34 subarch and implement SMP Implement the Panasonic MN10300 AM34 CPU subarch and implement SMP support for MN10300. Also implement support for the MN2WS0060 processor and the ASB2364 evaluation board which are AM34 based. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/Kconfig | 119 +- arch/mn10300/Makefile | 6 + arch/mn10300/boot/compressed/head.S | 20 +- arch/mn10300/include/asm/exceptions.h | 2 + arch/mn10300/include/asm/frame.inc | 36 + arch/mn10300/include/asm/hardirq.h | 2 + arch/mn10300/include/asm/intctl-regs.h | 37 +- arch/mn10300/include/asm/irq.h | 4 + arch/mn10300/include/asm/irqflags.h | 26 +- arch/mn10300/include/asm/pgtable.h | 19 +- arch/mn10300/include/asm/processor.h | 47 +- arch/mn10300/include/asm/ptrace.h | 15 +- arch/mn10300/include/asm/reset-regs.h | 2 +- arch/mn10300/include/asm/rtc.h | 11 - arch/mn10300/include/asm/rwlock.h | 125 +++ arch/mn10300/include/asm/serial-regs.h | 51 +- arch/mn10300/include/asm/serial.h | 8 +- arch/mn10300/include/asm/smp.h | 102 +- arch/mn10300/include/asm/spinlock.h | 179 ++- arch/mn10300/include/asm/spinlock_types.h | 20 + arch/mn10300/include/asm/system.h | 11 +- arch/mn10300/include/asm/timer-regs.h | 191 +++- arch/mn10300/include/asm/timex.h | 3 +- arch/mn10300/include/asm/uaccess.h | 2 +- arch/mn10300/kernel/Makefile | 3 +- arch/mn10300/kernel/asm-offsets.c | 2 +- arch/mn10300/kernel/entry.S | 113 +- arch/mn10300/kernel/gdb-io-serial-low.S | 5 +- arch/mn10300/kernel/gdb-io-serial.c | 37 +- arch/mn10300/kernel/gdb-io-ttysm.c | 24 +- arch/mn10300/kernel/gdb-stub.c | 17 +- arch/mn10300/kernel/head.S | 196 +++- arch/mn10300/kernel/internal.h | 12 + arch/mn10300/kernel/irq.c | 266 ++++- arch/mn10300/kernel/mn10300-serial-low.S | 6 +- arch/mn10300/kernel/mn10300-serial.c | 210 +++- arch/mn10300/kernel/mn10300-watchdog-low.S | 9 +- arch/mn10300/kernel/mn10300-watchdog.c | 100 +- arch/mn10300/kernel/process.c | 41 +- arch/mn10300/kernel/profile.c | 2 +- arch/mn10300/kernel/rtc.c | 41 +- arch/mn10300/kernel/setup.c | 75 +- arch/mn10300/kernel/smp-low.S | 97 ++ arch/mn10300/kernel/smp.c | 1141 ++++++++++++++++++++ arch/mn10300/kernel/switch_to.S | 17 + arch/mn10300/kernel/time.c | 32 +- arch/mn10300/kernel/traps.c | 18 +- arch/mn10300/lib/delay.c | 8 +- arch/mn10300/mm/fault.c | 12 +- arch/mn10300/proc-mn103e010/include/proc/clock.h | 2 - .../proc-mn103e010/include/proc/intctl-regs.h | 29 + arch/mn10300/proc-mn103e010/proc-init.c | 35 + arch/mn10300/proc-mn2ws0050/Makefile | 5 + arch/mn10300/proc-mn2ws0050/include/proc/cache.h | 48 + arch/mn10300/proc-mn2ws0050/include/proc/clock.h | 20 + .../proc-mn2ws0050/include/proc/dmactl-regs.h | 103 ++ .../proc-mn2ws0050/include/proc/intctl-regs.h | 29 + arch/mn10300/proc-mn2ws0050/include/proc/irq.h | 49 + .../proc-mn2ws0050/include/proc/nand-regs.h | 120 ++ arch/mn10300/proc-mn2ws0050/include/proc/proc.h | 18 + .../mn10300/proc-mn2ws0050/include/proc/smp-regs.h | 51 + arch/mn10300/proc-mn2ws0050/proc-init.c | 134 +++ arch/mn10300/unit-asb2303/include/unit/clock.h | 25 +- arch/mn10300/unit-asb2303/include/unit/serial.h | 5 + arch/mn10300/unit-asb2303/include/unit/timex.h | 64 +- arch/mn10300/unit-asb2303/unit-init.c | 10 +- arch/mn10300/unit-asb2305/include/unit/clock.h | 25 +- arch/mn10300/unit-asb2305/include/unit/serial.h | 5 + arch/mn10300/unit-asb2305/include/unit/timex.h | 66 +- arch/mn10300/unit-asb2305/pci.c | 2 +- arch/mn10300/unit-asb2305/unit-init.c | 6 +- arch/mn10300/unit-asb2364/Makefile | 10 + arch/mn10300/unit-asb2364/include/unit/clock.h | 29 + arch/mn10300/unit-asb2364/include/unit/fpga-regs.h | 50 + arch/mn10300/unit-asb2364/include/unit/leds.h | 54 + arch/mn10300/unit-asb2364/include/unit/serial.h | 151 +++ arch/mn10300/unit-asb2364/include/unit/timex.h | 125 +++ arch/mn10300/unit-asb2364/leds.c | 98 ++ arch/mn10300/unit-asb2364/unit-init.c | 85 ++ 79 files changed, 4494 insertions(+), 481 deletions(-) create mode 100644 arch/mn10300/include/asm/rwlock.h create mode 100644 arch/mn10300/include/asm/spinlock_types.h create mode 100644 arch/mn10300/kernel/smp-low.S create mode 100644 arch/mn10300/kernel/smp.c create mode 100644 arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h create mode 100644 arch/mn10300/proc-mn2ws0050/Makefile create mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/cache.h create mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/clock.h create mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h create mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h create mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/irq.h create mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h create mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/proc.h create mode 100644 arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h create mode 100644 arch/mn10300/proc-mn2ws0050/proc-init.c create mode 100644 arch/mn10300/unit-asb2364/Makefile create mode 100644 arch/mn10300/unit-asb2364/include/unit/clock.h create mode 100644 arch/mn10300/unit-asb2364/include/unit/fpga-regs.h create mode 100644 arch/mn10300/unit-asb2364/include/unit/leds.h create mode 100644 arch/mn10300/unit-asb2364/include/unit/serial.h create mode 100644 arch/mn10300/unit-asb2364/include/unit/timex.h create mode 100644 arch/mn10300/unit-asb2364/leds.c create mode 100644 arch/mn10300/unit-asb2364/unit-init.c (limited to 'arch/mn10300') diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index a0a16e6e4a4e..81e27816aaf8 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -48,7 +48,7 @@ config GENERIC_CALIBRATE_DELAY def_bool y config GENERIC_CMOS_UPDATE - def_bool y + def_bool n config GENERIC_FIND_NEXT_BIT def_bool y @@ -72,10 +72,6 @@ config GENERIC_HARDIRQS config HOTPLUG_CPU def_bool n -config HZ - int - default 1000 - mainmenu "Matsushita MN10300/AM33 Kernel Configuration" source "init/Kconfig" @@ -98,6 +94,9 @@ config MN10300_UNIT_ASB2303 config MN10300_UNIT_ASB2305 bool "ASB2305" +config MN10300_UNIT_ASB2364 + bool "ASB2364" + endchoice choice @@ -115,17 +114,13 @@ config MN10300_PROC_MN103E010 select MN10300_PROC_HAS_TTYSM1 select MN10300_PROC_HAS_TTYSM2 -endchoice - -choice - prompt "Processor core support" - default MN10300_CPU_AM33V2 - help - This option specifies the processor core for which the kernel will be - compiled. It affects the instruction set used. - -config MN10300_CPU_AM33V2 - bool "AM33v2" +config MN10300_PROC_MN2WS0050 + bool "MN2WS0050" + depends on MN10300_UNIT_ASB2364 + select AM34_2 + select MN10300_PROC_HAS_TTYSM0 + select MN10300_PROC_HAS_TTYSM1 + select MN10300_PROC_HAS_TTYSM2 endchoice @@ -138,7 +133,7 @@ config MN10300_HAS_ATOMIC_OPS_UNIT config FPU bool "FPU present" default y - depends on MN10300_PROC_MN103E010 + depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 config LAZY_SAVE_FPU bool "Save FPU state lazily" @@ -179,24 +174,55 @@ config KERNEL_TEXT_ADDRESS config KERNEL_ZIMAGE_BASE_ADDRESS hex "Base address of compressed vmlinux image" - default "0x90700000" + default "0x50700000" + +config BOOT_STACK_OFFSET + hex + default "0xF00" if SMP + default "0xFF0" if !SMP +config BOOT_STACK_SIZE + hex + depends on SMP + default "0x100" endmenu -config PREEMPT - bool "Preemptible Kernel" - help - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - This allows applications to run more reliably even when the system is - under load. +config SMP + bool "Symmetric multi-processing support" + default y + depends on MN10300_PROC_MN2WS0038 || MN10300_PROC_MN2WS0050 + ---help--- + This enables support for systems with more than one CPU. If you have + a system with only one CPU, like most personal computers, say N. If + you have a system with more than one CPU, say Y. + + If you say N here, the kernel will run on single and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + singleprocessor machines. On a singleprocessor machine, the kernel + will run faster if you say N here. + + See also , + and the SMP-HOWTO available at + . - Say Y here if you are building a kernel for a desktop, embedded - or real-time system. Say N if you are unsure. + If you don't know what to do here, say N. + +config NR_CPUS + int + depends on SMP + default "2" + +config USE_GENERIC_SMP_HELPERS + bool + depends on SMP + default y + +source "kernel/Kconfig.preempt" config MN10300_CURRENT_IN_E2 bool "Hold current task address in E2 register" + depends on !SMP default y help This option removes the E2/R2 register from the set available to gcc @@ -218,12 +244,14 @@ config MN10300_USING_JTAG suppresses the use of certain hardware debugging features, such as single-stepping, which are taken over completely by the JTAG unit. +source "kernel/Kconfig.hz" + config MN10300_RTC bool "Using MN10300 RTC" - depends on MN10300_PROC_MN103E010 + depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 + select GENERIC_CMOS_UPDATE default n help - This option enables support for the RTC, thus enabling time to be tracked, even when system is powered down. This is available on-chip on the MN103E010. @@ -315,14 +343,23 @@ config MN10300_TTYSM1 choice prompt "Select the timer to supply the clock for SIF1" - default MN10300_TTYSM0_TIMER9 + default MN10300_TTYSM1_TIMER12 \ + if !(AM33_2 || AM33_3) + default MN10300_TTYSM1_TIMER9 \ + if AM33_2 || AM33_3 depends on MN10300_TTYSM1 +config MN10300_TTYSM1_TIMER12 + bool "Use timer 12 (16-bit)" + depends on !(AM33_2 || AM33_3) + config MN10300_TTYSM1_TIMER9 bool "Use timer 9 (16-bit)" + depends on AM33_2 || AM33_3 config MN10300_TTYSM1_TIMER3 bool "Use timer 3 (8-bit)" + depends on AM33_2 || AM33_3 endchoice @@ -337,17 +374,33 @@ config MN10300_TTYSM2 choice prompt "Select the timer to supply the clock for SIF2" - default MN10300_TTYSM0_TIMER10 + default MN10300_TTYSM2_TIMER3 \ + if !(AM33_2 || AM33_3) + default MN10300_TTYSM2_TIMER10 \ + if AM33_2 || AM33_3 depends on MN10300_TTYSM2 +config MN10300_TTYSM2_TIMER9 + bool "Use timer 9 (16-bit)" + depends on !(AM33_2 || AM33_3) + +config MN10300_TTYSM2_TIMER1 + bool "Use timer 1 (8-bit)" + depends on !(AM33_2 || AM33_3) + +config MN10300_TTYSM2_TIMER3 + bool "Use timer 3 (8-bit)" + depends on !(AM33_2 || AM33_3) + config MN10300_TTYSM2_TIMER10 bool "Use timer 10 (16-bit)" + depends on AM33_2 || AM33_3 endchoice config MN10300_TTYSM2_CTS bool "Enable the use of the CTS line /dev/ttySM2" - depends on MN10300_TTYSM2 + depends on MN10300_TTYSM2 && AM33_2 endmenu diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile index ac5c6bdb2f05..7120282bf0d8 100644 --- a/arch/mn10300/Makefile +++ b/arch/mn10300/Makefile @@ -36,6 +36,9 @@ endif ifeq ($(CONFIG_MN10300_PROC_MN103E010),y) PROCESSOR := mn103e010 endif +ifeq ($(CONFIG_MN10300_PROC_MN2WS0050),y) +PROCESSOR := mn2ws0050 +endif ifeq ($(CONFIG_MN10300_UNIT_ASB2303),y) UNIT := asb2303 @@ -43,6 +46,9 @@ endif ifeq ($(CONFIG_MN10300_UNIT_ASB2305),y) UNIT := asb2305 endif +ifeq ($(CONFIG_MN10300_UNIT_ASB2364),y) +UNIT := asb2364 +endif head-y := arch/mn10300/kernel/head.o arch/mn10300/kernel/init_task.o diff --git a/arch/mn10300/boot/compressed/head.S b/arch/mn10300/boot/compressed/head.S index 4ef608a62416..7b50345b9e84 100644 --- a/arch/mn10300/boot/compressed/head.S +++ b/arch/mn10300/boot/compressed/head.S @@ -15,10 +15,28 @@ #include #include #include +#ifdef CONFIG_SMP +#include +#endif .globl startup_32 startup_32: - # first save off parameters from bootloader +#ifdef CONFIG_SMP + # + # Secondary CPUs jump directly to the kernel entry point + # + # Must save primary CPU's D0-D2 registers as they hold boot parameters + # + mov (CPUID), d3 + and CPUID_MASK,d3 + beq startup_primary + mov CONFIG_KERNEL_TEXT_ADDRESS,a0 + jmp (a0) + +startup_primary: +#endif /* CONFIG_SMP */ + + # first save parameters from bootloader mov param_save_area,a0 mov d0,(a0) mov d1,(4,a0) diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h index 7d8080bc6590..ca3e20508c77 100644 --- a/arch/mn10300/include/asm/exceptions.h +++ b/arch/mn10300/include/asm/exceptions.h @@ -114,6 +114,8 @@ extern void die(const char *, struct pt_regs *, enum exception_code) extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code); +#define NUM2EXCEP_IRQ_LEVEL(num) (EXCEP_IRQ_LEVEL0 + (num) * 8) + #endif /* __ASSEMBLY__ */ #endif /* _ASM_EXCEPTIONS_H */ diff --git a/arch/mn10300/include/asm/frame.inc b/arch/mn10300/include/asm/frame.inc index 5b1949bdf039..406060e5e1c0 100644 --- a/arch/mn10300/include/asm/frame.inc +++ b/arch/mn10300/include/asm/frame.inc @@ -18,6 +18,9 @@ #ifndef __ASM_OFFSETS_H__ #include #endif +#ifdef CONFIG_SMP +#include +#endif #define pi break @@ -37,9 +40,25 @@ movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp) mov sp,fp # FRAME pointer in A3 add -12,sp # allow for calls to be made +#ifdef CONFIG_SMP +#ifdef CONFIG_PREEMPT /* FIXME */ + mov epsw,d2 + and ~EPSW_IE,epsw +#endif + mov (CPUID),a0 + add a0,a0 + add a0,a0 + mov (___frame,a0),a1 + mov a1,(REG_NEXT,fp) + mov fp,(___frame,a0) +#ifdef CONFIG_PREEMPT /* FIXME */ + mov d2,epsw +#endif +#else /* CONFIG_SMP */ mov (__frame),a1 mov a1,(REG_NEXT,fp) mov fp,(__frame) +#endif /* CONFIG_SMP */ and ~EPSW_FE,epsw # disable the FPU inside the kernel @@ -57,10 +76,27 @@ .macro RESTORE_ALL # peel back the stack to the calling frame # - this permits execve() to discard extra frames due to kernel syscalls +#ifdef CONFIG_SMP +#ifdef CONFIG_PREEMPT /* FIXME */ + mov epsw,d2 + and ~EPSW_IE,epsw +#endif + mov (CPUID),a0 + add a0,a0 + add a0,a0 + mov (___frame,a0),fp + mov fp,sp + mov (REG_NEXT,fp),d0 # userspace has regs->next == 0 + mov d0,(___frame,a0) +#ifdef CONFIG_PREEMPT /* FIXME */ + mov d2,epsw +#endif +#else /* CONFIG_SMP */ mov (__frame),fp mov fp,sp mov (REG_NEXT,fp),d0 # userspace has regs->next == 0 mov d0,(__frame) +#endif /* CONFIG_SMP */ #ifndef CONFIG_MN10300_USING_JTAG mov (REG_EPSW,fp),d0 diff --git a/arch/mn10300/include/asm/hardirq.h b/arch/mn10300/include/asm/hardirq.h index 7bd9b7cc2451..0000d650b55f 100644 --- a/arch/mn10300/include/asm/hardirq.h +++ b/arch/mn10300/include/asm/hardirq.h @@ -19,8 +19,10 @@ /* assembly code in softirq.h is sensitive to the offsets of these fields */ typedef struct { unsigned int __softirq_pending; +#ifdef CONFIG_MN10300_WD_TIMER unsigned int __nmi_count; /* arch dependent */ unsigned int __irq_count; /* arch dependent */ +#endif } ____cacheline_aligned irq_cpustat_t; #include /* Standard mappings for irq_cpustat_t above */ diff --git a/arch/mn10300/include/asm/intctl-regs.h b/arch/mn10300/include/asm/intctl-regs.h index ba544c796c5a..585b708c2bc0 100644 --- a/arch/mn10300/include/asm/intctl-regs.h +++ b/arch/mn10300/include/asm/intctl-regs.h @@ -15,24 +15,19 @@ #ifdef __KERNEL__ -/* interrupt controller registers */ -#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */ - -#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */ -#define IAGR_GN 0x00fc /* group number register - * (documentation _has_ to be wrong) - */ +/* + * Interrupt controller registers + * - Registers 64-191 are at addresses offset from the main array + */ +#define GxICR(X) \ + __SYSREG(0xd4000000 + (X) * 4 + \ + (((X) >= 64) && ((X) < 192)) * 0xf00, u16) -#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */ -#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3) +#define GxICR_u8(X) \ + __SYSREG(0xd4000000 + (X) * 4 + \ + (((X) >= 64) && ((X) < 192)) * 0xf00, u8) -#define SET_XIRQ_TRIGGER(X,Y) \ -do { \ - u16 x = EXTMD; \ - x &= ~(3 << ((X) * 2)); \ - x |= ((Y) & 3) << ((X) * 2); \ - EXTMD = x; \ -} while (0) +#include #define XIRQ_TRIGGER_LOWLEVEL 0 #define XIRQ_TRIGGER_HILEVEL 1 @@ -59,10 +54,18 @@ do { \ #define GxICR_LEVEL_5 0x5000 /* - level 5 */ #define GxICR_LEVEL_6 0x6000 /* - level 6 */ #define GxICR_LEVEL_SHIFT 12 +#define GxICR_NMI 0x8000 /* nmi request flag */ + +#define NUM2GxICR_LEVEL(num) ((num) << GxICR_LEVEL_SHIFT) #ifndef __ASSEMBLY__ extern void set_intr_level(int irq, u16 level); -extern void set_intr_postackable(int irq); +extern void mn10300_intc_set_level(unsigned int irq, unsigned int level); +extern void mn10300_intc_clear(unsigned int irq); +extern void mn10300_intc_set(unsigned int irq); +extern void mn10300_intc_enable(unsigned int irq); +extern void mn10300_intc_disable(unsigned int irq); +extern void mn10300_set_lateack_irq_type(int irq); #endif /* external interrupts */ diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h index 25c045d16d1c..b7b8e175b167 100644 --- a/arch/mn10300/include/asm/irq.h +++ b/arch/mn10300/include/asm/irq.h @@ -22,7 +22,11 @@ #define NO_IRQ INT_MAX /* hardware irq numbers */ +#ifdef CONFIG_SMP +#define NR_IRQS GxICR_NUM_EXT_IRQS +#else #define NR_IRQS GxICR_NUM_IRQS +#endif /* external hardware irq numbers */ #define NR_XIRQS GxICR_NUM_XIRQS diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h index b3ab2071354d..7a7ae12c7119 100644 --- a/arch/mn10300/include/asm/irqflags.h +++ b/arch/mn10300/include/asm/irqflags.h @@ -13,6 +13,9 @@ #define _ASM_IRQFLAGS_H #include +#ifndef __ASSEMBLY__ +#include +#endif /* * interrupt control @@ -60,11 +63,12 @@ static inline unsigned long arch_local_irq_save(void) /* * we make sure arch_irq_enable() doesn't cause priority inversion */ -extern unsigned long __mn10300_irq_enabled_epsw; +extern unsigned long __mn10300_irq_enabled_epsw[]; static inline void arch_local_irq_enable(void) { unsigned long tmp; + int cpu = raw_smp_processor_id(); asm volatile( " mov epsw,%0 \n" @@ -72,8 +76,8 @@ static inline void arch_local_irq_enable(void) " or %2,%0 \n" " mov %0,epsw \n" : "=&d"(tmp) - : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) - : "memory"); + : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw[cpu]) + : "memory", "cc"); } static inline void arch_local_irq_restore(unsigned long flags) @@ -105,6 +109,9 @@ static inline bool arch_irqs_disabled(void) */ static inline void arch_safe_halt(void) { +#ifdef CONFIG_SMP + arch_local_irq_enable(); +#else asm volatile( " or %0,epsw \n" " nop \n" @@ -113,8 +120,21 @@ static inline void arch_safe_halt(void) : : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP) : "cc"); +#endif } +#define __sleep_cpu() \ +do { \ + asm volatile( \ + " bset %1,(%0)\n" \ + "1: btst %1,(%0)\n" \ + " bne 1b\n" \ + : \ + : "i"(&CPUM), "i"(CPUM_SLEEP) \ + : "cc" \ + ); \ +} while (0) + static inline void arch_local_cli(void) { asm volatile( diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h index 05dda641af80..cd568bf5407e 100644 --- a/arch/mn10300/include/asm/pgtable.h +++ b/arch/mn10300/include/asm/pgtable.h @@ -90,9 +90,15 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; * The vmalloc() routines also leaves a hole of 4kB between each vmalloced * area to catch addressing errors. */ +#ifndef __ASSEMBLY__ +#define VMALLOC_OFFSET (8UL * 1024 * 1024) +#define VMALLOC_START (0x70000000UL) +#define VMALLOC_END (0x7C000000UL) +#else #define VMALLOC_OFFSET (8 * 1024 * 1024) #define VMALLOC_START (0x70000000) #define VMALLOC_END (0x7C000000) +#endif #ifndef __ASSEMBLY__ extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE]; @@ -329,11 +335,7 @@ static inline int pte_exec_kernel(pte_t pte) return 1; } -/* - * Bits 0 and 1 are taken, split up the 29 bits of offset - * into this range: - */ -#define PTE_FILE_MAX_BITS 29 +#define PTE_FILE_MAX_BITS 30 #define pte_to_pgoff(pte) (pte_val(pte) >> 2) #define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE) @@ -379,8 +381,13 @@ static inline void ptep_mkdirty(pte_t *ptep) * Macro to mark a page protection value as "uncacheable". On processors which * do not support it, this is a no-op. */ -#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE) +#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHE) +/* + * Macro to mark a page protection value as "Write-Through". + * On processors which do not support it, this is a no-op. + */ +#define pgprot_through(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE_WT) /* * Conversion functions: convert a page and protection to a page entry, diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h index 0032fc76c8ba..75c422abcd6b 100644 --- a/arch/mn10300/include/asm/processor.h +++ b/arch/mn10300/include/asm/processor.h @@ -33,6 +33,8 @@ struct mm_struct; __pc; \ }) +extern void get_mem_info(unsigned long *mem_base, unsigned long *mem_size); + extern void show_registers(struct pt_regs *regs); /* @@ -43,17 +45,22 @@ extern void show_registers(struct pt_regs *regs); struct mn10300_cpuinfo { int type; - unsigned long loops_per_sec; + unsigned long loops_per_jiffy; char hard_math; - unsigned long *pgd_quick; - unsigned long *pte_quick; - unsigned long pgtable_cache_sz; }; extern struct mn10300_cpuinfo boot_cpu_data; +#ifdef CONFIG_SMP +#if CONFIG_NR_CPUS < 2 || CONFIG_NR_CPUS > 8 +# error Sorry, NR_CPUS should be 2 to 8 +#endif +extern struct mn10300_cpuinfo cpu_data[]; +#define current_cpu_data cpu_data[smp_processor_id()] +#else /* CONFIG_SMP */ #define cpu_data &boot_cpu_data #define current_cpu_data boot_cpu_data +#endif /* CONFIG_SMP */ extern void identify_cpu(struct mn10300_cpuinfo *); extern void print_cpu_info(struct mn10300_cpuinfo *); @@ -92,21 +99,21 @@ struct thread_struct { unsigned long a3; /* kernel FP */ unsigned long wchan; unsigned long usp; - struct pt_regs *__frame; + struct pt_regs *frame; unsigned long fpu_flags; #define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */ #define THREAD_HAS_FPU 0x00000002 /* T if this task owns the FPU right now */ struct fpu_state_struct fpu_state; }; -#define INIT_THREAD \ -{ \ - .uregs = init_uregs, \ - .pc = 0, \ - .sp = 0, \ - .a3 = 0, \ - .wchan = 0, \ - .__frame = NULL, \ +#define INIT_THREAD \ +{ \ + .uregs = init_uregs, \ + .pc = 0, \ + .sp = 0, \ + .a3 = 0, \ + .wchan = 0, \ + .frame = NULL, \ } #define INIT_MMAP \ @@ -118,6 +125,19 @@ struct thread_struct { * - need to discard the frame stacked by the kernel thread invoking the execve * syscall (see RESTORE_ALL macro) */ +#if defined(CONFIG_SMP) && defined(CONFIG_PREEMPT) /* FIXME */ +#define start_thread(regs, new_pc, new_sp) do { \ + int cpu; \ + preempt_disable(); \ + cpu = CPUID; \ + set_fs(USER_DS); \ + ___frame[cpu] = current->thread.uregs; \ + ___frame[cpu]->epsw = EPSW_nSL | EPSW_IE | EPSW_IM;\ + ___frame[cpu]->pc = new_pc; \ + ___frame[cpu]->sp = new_sp; \ + preempt_enable(); \ +} while (0) +#else /* CONFIG_SMP && CONFIG_PREEMPT */ #define start_thread(regs, new_pc, new_sp) do { \ set_fs(USER_DS); \ __frame = current->thread.uregs; \ @@ -125,6 +145,7 @@ struct thread_struct { __frame->pc = new_pc; \ __frame->sp = new_sp; \ } while (0) +#endif /* CONFIG_SMP && CONFIG_PREEMPT */ /* Free all resources held by a thread. */ extern void release_thread(struct task_struct *); diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h index 7c2e911052b6..c2b77bd3064a 100644 --- a/arch/mn10300/include/asm/ptrace.h +++ b/arch/mn10300/include/asm/ptrace.h @@ -40,7 +40,6 @@ #define PT_PC 26 #define NR_PTREGS 27 -#ifndef __ASSEMBLY__ /* * This defines the way registers are stored in the event of an exception * - the strange order is due to the MOVM instruction @@ -75,7 +74,6 @@ struct pt_regs { unsigned long epsw; unsigned long pc; }; -#endif /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ #define PTRACE_GETREGS 12 @@ -86,12 +84,13 @@ struct pt_regs { /* options set using PTRACE_SETOPTIONS */ #define PTRACE_O_TRACESYSGOOD 0x00000001 -#if defined(__KERNEL__) +#ifdef __KERNEL__ +#ifdef CONFIG_SMP +extern struct pt_regs *___frame[]; /* current frame pointer */ +#else extern struct pt_regs *__frame; /* current frame pointer */ - -#if !defined(__ASSEMBLY__) -struct task_struct; +#endif #define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) #define instruction_pointer(regs) ((regs)->pc) @@ -100,9 +99,7 @@ extern void show_regs(struct pt_regs *); #define arch_has_single_step() (1) -#endif /* !__ASSEMBLY */ - #define profile_pc(regs) ((regs)->pc) -#endif /* __KERNEL__ */ +#endif /* __KERNEL__ */ #endif /* _ASM_PTRACE_H */ diff --git a/arch/mn10300/include/asm/reset-regs.h b/arch/mn10300/include/asm/reset-regs.h index 174523d50132..10c7502a113f 100644 --- a/arch/mn10300/include/asm/reset-regs.h +++ b/arch/mn10300/include/asm/reset-regs.h @@ -50,7 +50,7 @@ static inline void mn10300_proc_hard_reset(void) RSTCTR |= RSTCTR_CHIPRST; } -extern unsigned int watchdog_alert_counter; +extern unsigned int watchdog_alert_counter[]; extern void watchdog_go(void); extern asmlinkage void watchdog_handler(void); diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h index c295194cc703..6c14bb1d0d9b 100644 --- a/arch/mn10300/include/asm/rtc.h +++ b/arch/mn10300/include/asm/rtc.h @@ -15,25 +15,14 @@ #include -extern void check_rtc_time(void); extern void __init calibrate_clock(void); -extern unsigned long __init get_initial_rtc_time(void); #else /* !CONFIG_MN10300_RTC */ -static inline void check_rtc_time(void) -{ -} - static inline void calibrate_clock(void) { } -static inline unsigned long get_initial_rtc_time(void) -{ - return 0; -} - #endif /* !CONFIG_MN10300_RTC */ #include diff --git a/arch/mn10300/include/asm/rwlock.h b/arch/mn10300/include/asm/rwlock.h new file mode 100644 index 000000000000..6d594d4a0e10 --- /dev/null +++ b/arch/mn10300/include/asm/rwlock.h @@ -0,0 +1,125 @@ +/* + * Helpers used by both rw spinlocks and rw semaphores. + * + * Based in part on code from semaphore.h and + * spinlock.h Copyright 1996 Linus Torvalds. + * + * Copyright 1999 Red Hat, Inc. + * + * Written by Benjamin LaHaise. + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Temporarily delete lock functions for SMP support. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ +#ifndef _ASM_RWLOCK_H +#define _ASM_RWLOCK_H + +#define RW_LOCK_BIAS 0x01000000 + +#ifndef CONFIG_SMP + +typedef struct { unsigned long a[100]; } __dummy_lock_t; +#define __dummy_lock(lock) (*(__dummy_lock_t *)(lock)) + +#define RW_LOCK_BIAS_STR "0x01000000" + +#define __build_read_lock_ptr(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_read_lock_const(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_read_lock(rw, helper) \ + do { \ + if (__builtin_constant_p(rw)) \ + __build_read_lock_const(rw, helper); \ + else \ + __build_read_lock_ptr(rw, helper); \ + } while (0) + +#define __build_write_lock_ptr(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_write_lock_const(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_write_lock(rw, helper) \ + do { \ + if (__builtin_constant_p(rw)) \ + __build_write_lock_const(rw, helper); \ + else \ + __build_write_lock_ptr(rw, helper); \ + } while (0) + +#endif /* CONFIG_SMP */ +#endif /* _ASM_RWLOCK_H */ diff --git a/arch/mn10300/include/asm/serial-regs.h b/arch/mn10300/include/asm/serial-regs.h index 6498469e93ac..8320cda32f5a 100644 --- a/arch/mn10300/include/asm/serial-regs.h +++ b/arch/mn10300/include/asm/serial-regs.h @@ -20,18 +20,25 @@ /* serial port 0 */ #define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */ #define SC01CTR_CK 0x0007 /* clock source select */ -#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */ #define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ #define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ +#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ +#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */ +#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) +#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ #define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */ -#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */ +#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */ #define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */ +#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */ +#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 1 only) */ #define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */ -#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ -#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */ +#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ +#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ +#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */ +#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM12UFLOW_8 0x0000 /* - 1/8 timer 12 underflow (serial port 1 only) */ +#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ #define SC01CTR_STB 0x0008 /* stop bit select */ #define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */ #define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */ @@ -100,11 +107,23 @@ /* serial port 2 */ #define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */ +#ifdef CONFIG_AM33_2 #define SC2CTR_CK 0x0003 /* clock source select */ #define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */ #define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */ #define SC2CTR_CK_EXTERN 0x0002 /* - external closk */ #define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */ +#else /* CONFIG_AM33_2 */ +#define SC2CTR_CK 0x0007 /* clock source select */ +#define SC2CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow */ +#define SC2CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ +#define SC2CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ +#define SC2CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow */ +#define SC2CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow */ +#define SC2CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow */ +#define SC2CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ +#define SC2CTR_CK_EXTERN 0x0007 /* - external closk */ +#endif /* CONFIG_AM33_2 */ #define SC2CTR_STB 0x0008 /* stop bit select */ #define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */ #define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */ @@ -134,9 +153,14 @@ #define SC2ICR_RES 0x04 /* receive error select */ #define SC2ICR_RI 0x01 /* receive interrupt cause */ -#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */ -#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */ -#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */ +#define SC2TXB __SYSREG(0xd4002028, u8) /* transmit buffer reg */ +#define SC2RXB __SYSREG(0xd4002029, u8) /* receive buffer reg */ + +#ifdef CONFIG_AM33_2 +#define SC2STR __SYSREG(0xd400202c, u8) /* status reg */ +#else /* CONFIG_AM33_2 */ +#define SC2STR __SYSREG(0xd400202c, u16) /* status reg */ +#endif /* CONFIG_AM33_2 */ #define SC2STR_OEF 0x0001 /* overrun error found */ #define SC2STR_PEF 0x0002 /* parity error found */ #define SC2STR_FEF 0x0004 /* framing error found */ @@ -146,10 +170,17 @@ #define SC2STR_RXF 0x0040 /* receive status */ #define SC2STR_TXF 0x0080 /* transmit status */ +#ifdef CONFIG_AM33_2 #define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */ +#endif +#ifdef CONFIG_AM33_2 #define SC2RXIRQ 24 /* serial 2 Receive IRQ */ #define SC2TXIRQ 25 /* serial 2 Transmit IRQ */ +#else /* CONFIG_AM33_2 */ +#define SC2RXIRQ 68 /* serial 2 Receive IRQ */ +#define SC2TXIRQ 69 /* serial 2 Transmit IRQ */ +#endif /* CONFIG_AM33_2 */ #define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */ #define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */ diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h index a29445cddd6f..23a799293599 100644 --- a/arch/mn10300/include/asm/serial.h +++ b/arch/mn10300/include/asm/serial.h @@ -9,10 +9,8 @@ * 2 of the Licence, or (at your option) any later version. */ -/* - * The ASB2305 has an 18.432 MHz clock the UART - */ -#define BASE_BAUD (18432000 / 16) +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H /* Standard COM flags (except for COM4, because of the 8514 problem) */ #ifdef CONFIG_SERIAL_DETECT_IRQ @@ -34,3 +32,5 @@ #endif #include + +#endif /* _ASM_SERIAL_H */ diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h index 4eb8c61b7dab..b8585b4e8cdf 100644 --- a/arch/mn10300/include/asm/smp.h +++ b/arch/mn10300/include/asm/smp.h @@ -3,6 +3,16 @@ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Define IPI-IRQ number and add inline/macro function + * for SMP support. + * 22-Jan-2007 MEI Add the define related to SMP_BOOT_IRQ. + * 23-Feb-2007 MEI Add the define related to SMP icahce invalidate. + * 23-Jun-2008 MEI Delete INTC_IPI. + * 22-Jul-2008 MEI Add smp_nmi_call_function and related defines. + * 04-Aug-2008 MEI Delete USE_DOIRQ_CACHE_IPI. + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public Licence * as published by the Free Software Foundation; either version @@ -11,8 +21,98 @@ #ifndef _ASM_SMP_H #define _ASM_SMP_H +#ifndef __ASSEMBLY__ +#include +#include +#endif + #ifdef CONFIG_SMP -#error SMP not yet supported for MN10300 +#include + +#define RESCHEDULE_IPI 63 +#define CALL_FUNC_SINGLE_IPI 192 +#define LOCAL_TIMER_IPI 193 +#define FLUSH_CACHE_IPI 194 +#define CALL_FUNCTION_NMI_IPI 195 +#define GDB_NMI_IPI 196 + +#define SMP_BOOT_IRQ 195 + +#define RESCHEDULE_GxICR_LV GxICR_LEVEL_6 +#define CALL_FUNCTION_GxICR_LV GxICR_LEVEL_4 +#define LOCAL_TIMER_GxICR_LV GxICR_LEVEL_4 +#define FLUSH_CACHE_GxICR_LV GxICR_LEVEL_0 +#define SMP_BOOT_GxICR_LV GxICR_LEVEL_0 + +#define TIME_OUT_COUNT_BOOT_IPI 100 +#define DELAY_TIME_BOOT_IPI 75000 + + +#ifndef __ASSEMBLY__ + +/** + * raw_smp_processor_id - Determine the raw CPU ID of the CPU running it + * + * What we really want to do is to use the CPUID hardware CPU register to get + * this information, but accesses to that aren't cached, and run at system bus + * speed, not CPU speed. A copy of this value is, however, stored in the + * thread_info struct, and that can be cached. + * + * An alternate way of dealing with this could be to use the EPSW.S bits to + * cache this information for systems with up to four CPUs. + */ +#if 0 +#define raw_smp_processor_id() (CPUID) +#else +#define raw_smp_processor_id() (current_thread_info()->cpu) #endif +static inline int cpu_logical_map(int cpu) +{ + return cpu; +} + +static inline int cpu_number_map(int cpu) +{ + return cpu; +} + + +extern cpumask_t cpu_boot_map; + +extern void smp_init_cpus(void); +extern void smp_cache_interrupt(void); +extern void send_IPI_allbutself(int irq); +extern int smp_nmi_call_function(smp_call_func_t func, void *info, int wait); + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); + +#ifdef CONFIG_HOTPLUG_CPU +extern int __cpu_disable(void); +extern void __cpu_die(unsigned int cpu); +#endif /* CONFIG_HOTPLUG_CPU */ + +#ifdef CONFIG_PREEMPT /* FIXME */ +#define __frame \ + ({ \ + struct pt_regs *f; \ + preempt_disable(); \ + f = ___frame[CPUID]; \ + preempt_enable(); \ + f; \ + }) +#else +#define __frame ___frame[CPUID] #endif + +#endif /* __ASSEMBLY__ */ +#else /* CONFIG_SMP */ +#ifndef __ASSEMBLY__ + +static inline void smp_init_cpus(void) {} + +#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_SMP */ + +#endif /* _ASM_SMP_H */ diff --git a/arch/mn10300/include/asm/spinlock.h b/arch/mn10300/include/asm/spinlock.h index 4bf9c8b169e0..93429154e898 100644 --- a/arch/mn10300/include/asm/spinlock.h +++ b/arch/mn10300/include/asm/spinlock.h @@ -11,6 +11,183 @@ #ifndef _ASM_SPINLOCK_H #define _ASM_SPINLOCK_H -#error SMP spinlocks not implemented for MN10300 +#include +#include +#include +/* + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * We make no fairness assumptions. They have a cost. + */ + +#define arch_spin_is_locked(x) (*(volatile signed char *)(&(x)->slock) != 0) +#define arch_spin_unlock_wait(x) do { barrier(); } while (arch_spin_is_locked(x)) + +static inline void arch_spin_unlock(arch_spinlock_t *lock) +{ + asm volatile( + " bclr 1,(0,%0) \n" + : + : "a"(&lock->slock) + : "memory", "cc"); +} + +static inline int arch_spin_trylock(arch_spinlock_t *lock) +{ + int ret; + + asm volatile( + " mov 1,%0 \n" + " bset %0,(%1) \n" + " bne 1f \n" + " clr %0 \n" + "1: xor 1,%0 \n" + : "=d"(ret) + : "a"(&lock->slock) + : "memory", "cc"); + + return ret; +} + +static inline void arch_spin_lock(arch_spinlock_t *lock) +{ + asm volatile( + "1: bset 1,(0,%0) \n" + " bne 1b \n" + : + : "a"(&lock->slock) + : "memory", "cc"); +} + +static inline void arch_spin_lock_flags(arch_spinlock_t *lock, + unsigned long flags) +{ + int temp; + + asm volatile( + "1: bset 1,(0,%2) \n" + " beq 3f \n" + " mov %1,epsw \n" + "2: mov (0,%2),%0 \n" + " or %0,%0 \n" + " bne 2b \n" + " mov %3,%0 \n" + " mov %0,epsw \n" + " nop \n" + " nop \n" + " bra 1b\n" + "3: \n" + : "=&d" (temp) + : "d" (flags), "a"(&lock->slock), "i"(EPSW_IE | MN10300_CLI_LEVEL) + : "memory", "cc"); +} + +#ifdef __KERNEL__ + +/* + * Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ + +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define arch_read_can_lock(x) ((int)(x)->lock > 0) + +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define arch_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) + +/* + * On mn10300, we implement read-write locks as a 32-bit counter + * with the high bit (sign) being the "contended" bit. + */ +static inline void arch_read_lock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_read_lock(rw, "__read_lock_failed"); +#else + { + atomic_t *count = (atomic_t *)rw; + while (atomic_dec_return(count) < 0) + atomic_inc(count); + } +#endif +} + +static inline void arch_write_lock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_write_lock(rw, "__write_lock_failed"); +#else + { + atomic_t *count = (atomic_t *)rw; + while (!atomic_sub_and_test(RW_LOCK_BIAS, count)) + atomic_add(RW_LOCK_BIAS, count); + } +#endif +} + +static inline void arch_read_unlock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_read_unlock(rw); +#else + { + atomic_t *count = (atomic_t *)rw; + atomic_inc(count); + } +#endif +} + +static inline void arch_write_unlock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_write_unlock(rw); +#else + { + atomic_t *count = (atomic_t *)rw; + atomic_add(RW_LOCK_BIAS, count); + } +#endif +} + +static inline int arch_read_trylock(arch_rwlock_t *lock) +{ + atomic_t *count = (atomic_t *)lock; + atomic_dec(count); + if (atomic_read(count) >= 0) + return 1; + atomic_inc(count); + return 0; +} + +static inline int arch_write_trylock(arch_rwlock_t *lock) +{ + atomic_t *count = (atomic_t *)lock; + if (atomic_sub_and_test(RW_LOCK_BIAS, count)) + return 1; + atomic_add(RW_LOCK_BIAS, count); + return 0; +} + +#define arch_read_lock_flags(lock, flags) arch_read_lock(lock) +#define arch_write_lock_flags(lock, flags) arch_write_lock(lock) + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* __KERNEL__ */ #endif /* _ASM_SPINLOCK_H */ diff --git a/arch/mn10300/include/asm/spinlock_types.h b/arch/mn10300/include/asm/spinlock_types.h new file mode 100644 index 000000000000..653dc519b405 --- /dev/null +++ b/arch/mn10300/include/asm/spinlock_types.h @@ -0,0 +1,20 @@ +#ifndef _ASM_SPINLOCK_TYPES_H +#define _ASM_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct arch_spinlock { + unsigned int slock; +} arch_spinlock_t; + +#define __ARCH_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + unsigned int lock; +} arch_rwlock_t; + +#define __ARCH_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } + +#endif /* _ASM_SPINLOCK_TYPES_H */ diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h index 7de90bc4cf80..8ff3e5aaca41 100644 --- a/arch/mn10300/include/asm/system.h +++ b/arch/mn10300/include/asm/system.h @@ -12,6 +12,7 @@ #define _ASM_SYSTEM_H #include +#include #ifdef __KERNEL__ #ifndef __ASSEMBLY__ @@ -57,8 +58,6 @@ do { \ #define nop() asm volatile ("nop") -#endif /* !__ASSEMBLY__ */ - /* * Force strict CPU ordering. * And yes, this is required on UP too when we're talking @@ -85,17 +84,19 @@ do { \ #define smp_mb() mb() #define smp_rmb() rmb() #define smp_wmb() wmb() -#else +#define set_mb(var, value) do { xchg(&var, value); } while (0) +#else /* CONFIG_SMP */ #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() -#endif - #define set_mb(var, value) do { var = value; mb(); } while (0) +#endif /* CONFIG_SMP */ + #define set_wmb(var, value) do { var = value; wmb(); } while (0) #define read_barrier_depends() do {} while (0) #define smp_read_barrier_depends() do {} while (0) +#endif /* !__ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_SYSTEM_H */ diff --git a/arch/mn10300/include/asm/timer-regs.h b/arch/mn10300/include/asm/timer-regs.h index 1d883b7f94ab..c634977caf66 100644 --- a/arch/mn10300/include/asm/timer-regs.h +++ b/arch/mn10300/include/asm/timer-regs.h @@ -17,21 +17,27 @@ #ifdef __KERNEL__ -/* timer prescalar control */ +/* + * Timer prescalar control + */ #define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */ #define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */ #define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */ -/* 8 bit timers */ +/* + * 8-bit timers + */ #define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */ #define TM0MD_SRC 0x07 /* timer source */ #define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */ #define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ #define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */ #define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) +#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */ #define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -43,7 +49,9 @@ #define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */ #define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -55,7 +63,9 @@ #define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */ #define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#if defined(CONFIG_AM33_2) #define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -64,11 +74,13 @@ #define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */ #define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ #define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */ +#define TM3MD_SRC_TM2CASCADE 0x03 /* - cascade with timer 2 */ #define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -96,7 +108,9 @@ #define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */ #define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */ -/* 16-bit timers 4,5 & 7-11 */ +/* + * 16-bit timers 4,5 & 7-15 + */ #define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */ #define TM4MD_SRC 0x07 /* timer source */ #define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */ @@ -105,7 +119,9 @@ #define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -118,7 +134,11 @@ #define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM5MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -130,7 +150,9 @@ #define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -143,7 +165,11 @@ #define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM8MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -156,7 +182,11 @@ #define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM9MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -169,7 +199,11 @@ #define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM10MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -178,32 +212,101 @@ #define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */ #define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ #define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */ #define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM11MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */ +#if defined(CONFIG_AM34_2) +#define TM12MD __SYSREG(0xd4003180, u8) /* timer 11 mode register */ +#define TM12MD_SRC 0x07 /* timer source */ +#define TM12MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM12MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM12MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM12MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM12MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM12MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM12MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM12MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM12MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM13MD __SYSREG(0xd4003182, u8) /* timer 11 mode register */ +#define TM13MD_SRC 0x07 /* timer source */ +#define TM13MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM13MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM13MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM13MD_SRC_TM12CASCADE 0x03 /* - cascade with timer 12 */ +#define TM13MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM13MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM13MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM13MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM13MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM13MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM14MD __SYSREG(0xd4003184, u8) /* timer 11 mode register */ +#define TM14MD_SRC 0x07 /* timer source */ +#define TM14MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM14MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM14MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM14MD_SRC_TM13CASCADE 0x03 /* - cascade with timer 13 */ +#define TM14MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM14MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM14MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM14MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM14MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM14MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM15MD __SYSREG(0xd4003186, u8) /* timer 11 mode register */ +#define TM15MD_SRC 0x07 /* timer source */ +#define TM15MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM15MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM15MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM15MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM15MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM15MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM15MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM15MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM15MD_COUNT_ENABLE 0x80 /* timer count enable */ +#endif /* CONFIG_AM34_2 */ + + #define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */ #define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */ +#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */ #define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */ #define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */ #define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */ +#define TM89BR __SYSREG(0xd4003098, u32) /* timer 8:9 base register */ #define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */ #define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */ -#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */ +#if defined(CONFIG_AM34_2) +#define TM12BR __SYSREG(0xd4003190, u16) /* timer 12 base register */ +#define TM13BR __SYSREG(0xd4003192, u16) /* timer 13 base register */ +#define TM14BR __SYSREG(0xd4003194, u16) /* timer 14 base register */ +#define TM15BR __SYSREG(0xd4003196, u16) /* timer 15 base register */ +#endif /* CONFIG_AM34_2 */ #define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */ #define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */ #define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */ - #define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */ #define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */ #define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */ +#define TM89BC __SYSREG(0xd40030a8, u32) /* timer 8:9 binary counter */ #define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */ #define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */ +#if defined(CONFIG_AM34_2) +#define TM12BC __SYSREG(0xd40031a0, u16) /* timer 12 binary counter */ +#define TM13BC __SYSREG(0xd40031a2, u16) /* timer 13 binary counter */ +#define TM14BC __SYSREG(0xd40031a4, u16) /* timer 14 binary counter */ +#define TM15BC __SYSREG(0xd40031a6, u16) /* timer 15 binary counter */ +#endif /* CONFIG_AM34_2 */ #define TM4IRQ 6 /* timer 4 IRQ */ #define TM5IRQ 7 /* timer 5 IRQ */ @@ -212,6 +315,12 @@ #define TM9IRQ 13 /* timer 9 IRQ */ #define TM10IRQ 14 /* timer 10 IRQ */ #define TM11IRQ 15 /* timer 11 IRQ */ +#if defined(CONFIG_AM34_2) +#define TM12IRQ 64 /* timer 12 IRQ */ +#define TM13IRQ 65 /* timer 13 IRQ */ +#define TM14IRQ 66 /* timer 14 IRQ */ +#define TM15IRQ 67 /* timer 15 IRQ */ +#endif /* CONFIG_AM34_2 */ #define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */ #define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */ @@ -220,8 +329,16 @@ #define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */ #define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */ #define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */ - -/* 16-bit timer 6 */ +#if defined(CONFIG_AM34_2) +#define TM12ICR GxICR(TM12IRQ) /* timer 12 uflow intr ctrl reg */ +#define TM13ICR GxICR(TM13IRQ) /* timer 13 uflow intr ctrl reg */ +#define TM14ICR GxICR(TM14IRQ) /* timer 14 uflow intr ctrl reg */ +#define TM15ICR GxICR(TM15IRQ) /* timer 15 uflow intr ctrl reg */ +#endif /* CONFIG_AM34_2 */ + +/* + * 16-bit timer 6 + */ #define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */ #define TM6MD_SRC 0x0007 /* timer source */ #define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */ @@ -229,10 +346,14 @@ #define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */ #define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */ #define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */ -#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */ +#define TM6MD_SRC_TM2UFLOW 0x0006 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) +/* #define TM6MD_SRC_TM6IOB_BOTH 0x0006 */ /* - TM6IOB pin input (both edges) */ #define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */ -#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */ +#endif /* CONFIG_AM33_2 */ #define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */ +#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */ +#if defined(CONFIG_AM33_2) #define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */ #define TM6MD_PWM 0x3800 /* PWM output mode */ #define TM6MD_PWM_DIS 0x0000 /* - disabled */ @@ -240,10 +361,15 @@ #define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */ #define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */ #define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */ +#endif /* CONFIG_AM33_2 */ + #define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */ #define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */ #define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */ +#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ +#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ +#if defined(CONFIG_AM33_2) #define TM6MDA_OUT 0x07 /* output select */ #define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */ #define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */ @@ -251,30 +377,35 @@ #define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */ #define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */ #define TM6MDA_MODE 0xc0 /* compare A register mode */ -#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ #define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ #define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ #define TM6MDA_EDGE 0x20 /* compare A edge select */ #define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */ #define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */ #define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */ +#else /* !CONFIG_AM33_2 */ +#define TM6MDA_MODE 0x40 /* compare A register mode */ +#endif /* CONFIG_AM33_2 */ #define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */ +#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ +#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ +#if defined(CONFIG_AM33_2) #define TM6MDB_OUT 0x07 /* output select */ #define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */ #define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */ #define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */ #define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */ #define TM6MDB_MODE 0xc0 /* compare B register mode */ -#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ #define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ #define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ #define TM6MDB_EDGE 0x20 /* compare B edge select */ #define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */ #define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */ #define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */ +#else /* !CONFIG_AM33_2 */ +#define TM6MDB_MODE 0x40 /* compare B register mode */ +#endif /* CONFIG_AM33_2 */ #define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */ #define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */ @@ -288,6 +419,34 @@ #define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */ #define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */ +#if defined(CONFIG_AM34_2) +/* + * MTM: OS Tick-Timer + */ +#define TMTMD __SYSREG(0xd4004100, u8) /* Tick Timer mode register */ +#define TMTMD_TMTLDE 0x40 /* initialize TMTBC = TMTBR */ +#define TMTMD_TMTCNE 0x80 /* timer count enable */ + +#define TMTBR __SYSREG(0xd4004110, u32) /* Tick Timer mode reg */ +#define TMTBC __SYSREG(0xd4004120, u32) /* Tick Timer mode reg */ + +/* + * MTM: OS Timestamp-Timer + */ +#define TMSMD __SYSREG(0xd4004140, u8) /* Tick Timer mode register */ +#define TMSMD_TMSLDE 0x40 /* initialize TMSBC = TMSBR */ +#define TMSMD_TMSCNE 0x80 /* timer count enable */ + +#define TMSBR __SYSREG(0xd4004150, u32) /* Tick Timer mode register */ +#define TMSBC __SYSREG(0xd4004160, u32) /* Tick Timer mode register */ + +#define TMTIRQ 119 /* OS Tick timer IRQ */ +#define TMSIRQ 120 /* Timestamp timer IRQ */ + +#define TMTICR GxICR(TMTIRQ) /* OS Tick timer uflow intr ctrl reg */ +#define TMSICR GxICR(TMSIRQ) /* Timestamp timer uflow intr ctrl reg */ +#endif /* CONFIG_AM34_2 */ + #endif /* __KERNEL__ */ #endif /* _ASM_TIMER_REGS_H */ diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h index 8d031f9e117d..ce5719a2ce7c 100644 --- a/arch/mn10300/include/asm/timex.h +++ b/arch/mn10300/include/asm/timex.h @@ -16,8 +16,7 @@ #define TICK_SIZE (tick_nsec / 1000) -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set - * to something appropriate, but what? */ +#define CLOCK_TICK_RATE MN10300_JCCLK /* Underlying HZ */ extern cycles_t cacheflush_time; diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h index 197a7af3dd8a..47e7951e6893 100644 --- a/arch/mn10300/include/asm/uaccess.h +++ b/arch/mn10300/include/asm/uaccess.h @@ -377,7 +377,7 @@ unsigned long __generic_copy_to_user_nocheck(void *to, const void *from, #if 0 -#error don't use - these macros don't increment to & from pointers +#error "don't use - these macros don't increment to & from pointers" /* Optimize just a little bit when we know the size of the move. */ #define __constant_copy_user(to, from, size) \ do { \ diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile index 99022351717a..5b41192f496b 100644 --- a/arch/mn10300/kernel/Makefile +++ b/arch/mn10300/kernel/Makefile @@ -10,8 +10,9 @@ obj-y := process.o signal.o entry.o traps.o irq.o \ ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \ switch_to.o mn10300_ksyms.o kernel_execve.o $(fpu-obj-y) -obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o +obj-$(CONFIG_SMP) += smp.o smp-low.o +obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o obj-$(CONFIG_MN10300_TTYSM) += mn10300-serial.o mn10300-serial-low.o \ mn10300-debug.o diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c index 78e290e342fc..54cc5b6b13f2 100644 --- a/arch/mn10300/kernel/asm-offsets.c +++ b/arch/mn10300/kernel/asm-offsets.c @@ -66,7 +66,7 @@ void foo(void) OFFSET(THREAD_SP, thread_struct, sp); OFFSET(THREAD_A3, thread_struct, a3); OFFSET(THREAD_USP, thread_struct, usp); - OFFSET(THREAD_FRAME, thread_struct, __frame); + OFFSET(THREAD_FRAME, thread_struct, frame); #ifdef CONFIG_FPU OFFSET(THREAD_FPU_FLAGS, thread_struct, fpu_flags); OFFSET(THREAD_FPU_STATE, thread_struct, fpu_state); diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 355f68176771..f00b9bafcd3e 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -28,25 +28,17 @@ #include #include +#if defined(CONFIG_SMP) && defined(CONFIG_GDBSTUB) +#include +#endif /* CONFIG_SMP && CONFIG_GDBSTUB */ + #ifdef CONFIG_PREEMPT -#define preempt_stop __cli +#define preempt_stop LOCAL_IRQ_DISABLE #else #define preempt_stop #define resume_kernel restore_all #endif - .macro __cli - and ~EPSW_IM,epsw - or EPSW_IE|MN10300_CLI_LEVEL,epsw - nop - nop - nop - .endm - .macro __sti - or EPSW_IE|EPSW_IM_7,epsw - .endm - - .am33_2 ############################################################################### @@ -88,7 +80,7 @@ syscall_call: syscall_exit: # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti - __cli + LOCAL_IRQ_DISABLE mov (TI_flags,a2),d2 btst _TIF_ALLWORK_MASK,d2 bne syscall_exit_work @@ -105,7 +97,7 @@ restore_all: syscall_exit_work: btst _TIF_SYSCALL_TRACE,d2 beq work_pending - __sti # could let syscall_trace_exit() call + LOCAL_IRQ_ENABLE # could let syscall_trace_exit() call # schedule() instead mov fp,d0 call syscall_trace_exit[],0 # do_syscall_trace(regs) @@ -121,7 +113,7 @@ work_resched: # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti - __cli + LOCAL_IRQ_DISABLE # is there any work to be done other than syscall tracing? mov (TI_flags,a2),d2 @@ -168,7 +160,7 @@ ret_from_intr: ENTRY(resume_userspace) # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti - __cli + LOCAL_IRQ_DISABLE # is there any work to be done on int/exception return? mov (TI_flags,a2),d2 @@ -178,7 +170,7 @@ ENTRY(resume_userspace) #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) - __cli + LOCAL_IRQ_DISABLE mov (TI_preempt_count,a2),d0 # non-zero preempt_count ? cmp 0,d0 bne restore_all @@ -281,6 +273,79 @@ ENTRY(nmi_handler) add -4,sp mov d0,(sp) mov (TBR),d0 + +#ifdef CONFIG_SMP + add -4,sp + mov d0,(sp) # save d0(TBR) + movhu (NMIAGR),d0 + and NMIAGR_GN,d0 + lsr 0x2,d0 + cmp CALL_FUNCTION_NMI_IPI,d0 + bne 5f # if not call function, jump + + # function call nmi ipi + add 4,sp # no need to store TBR + mov GxICR_DETECT,d0 # clear NMI request + movbu d0,(GxICR(CALL_FUNCTION_NMI_IPI)) + movhu (GxICR(CALL_FUNCTION_NMI_IPI)),d0 + and ~EPSW_NMID,epsw # enable NMI + + mov (sp),d0 # restore d0 + SAVE_ALL + call smp_nmi_call_function_interrupt[],0 + RESTORE_ALL + +5: +#ifdef CONFIG_GDBSTUB + cmp GDB_NMI_IPI,d0 + bne 3f # if not gdb nmi ipi, jump + + # gdb nmi ipi + add 4,sp # no need to store TBR + mov GxICR_DETECT,d0 # clear NMI + movbu d0,(GxICR(GDB_NMI_IPI)) + movhu (GxICR(GDB_NMI_IPI)),d0 + and ~EPSW_NMID,epsw # enable NMI +#ifdef CONFIG_MN10300_CACHE_ENABLED + mov (gdbstub_nmi_opr_type),d0 + cmp GDBSTUB_NMI_CACHE_PURGE,d0 + bne 4f # if not gdb cache purge, jump + + # gdb cache purge nmi ipi + add -20,sp + mov d1,(4,sp) + mov a0,(8,sp) + mov a1,(12,sp) + mov mdr,d0 + mov d0,(16,sp) + call gdbstub_local_purge_cache[],0 + mov 0x1,d0 + mov (CPUID),d1 + asl d1,d0 + mov gdbstub_nmi_cpumask,a0 + bclr d0,(a0) + mov (4,sp),d1 + mov (8,sp),a0 + mov (12,sp),a1 + mov (16,sp),d0 + mov d0,mdr + add 20,sp + mov (sp),d0 + add 4,sp + rti +4: +#endif /* CONFIG_MN10300_CACHE_ENABLED */ + # gdb wait nmi ipi + mov (sp),d0 + SAVE_ALL + call gdbstub_nmi_wait[],0 + RESTORE_ALL +3: +#endif /* CONFIG_GDBSTUB */ + mov (sp),d0 # restore TBR to d0 + add 4,sp +#endif /* CONFIG_SMP */ + bra __common_exception_nonmi ENTRY(__common_exception) @@ -314,15 +379,21 @@ __common_exception_nonmi: mov d0,(REG_ORIG_D0,fp) #ifdef CONFIG_GDBSTUB +#ifdef CONFIG_SMP + call gdbstub_busy_check[],0 + and d0,d0 # check return value + beq 2f +#else /* CONFIG_SMP */ btst 0x01,(gdbstub_busy) beq 2f +#endif /* CONFIG_SMP */ and ~EPSW_IE,epsw mov fp,d0 mov a2,d1 call gdbstub_exception[],0 # gdbstub itself caused an exception bra restore_all 2: -#endif +#endif /* CONFIG_GDBSTUB */ mov fp,d0 # arg 0: stacked register file mov a2,d1 # arg 1: exception number @@ -357,11 +428,7 @@ ENTRY(set_excp_vector) add exception_table,d0 mov d1,(d0) mov 4,d1 -#if defined(CONFIG_MN10300_CACHE_WBACK) - jmp mn10300_dcache_flush_inv_range2 -#else ret [],0 -#endif ############################################################################### # diff --git a/arch/mn10300/kernel/gdb-io-serial-low.S b/arch/mn10300/kernel/gdb-io-serial-low.S index 4998b24f5d3a..b1d0152e96cb 100644 --- a/arch/mn10300/kernel/gdb-io-serial-low.S +++ b/arch/mn10300/kernel/gdb-io-serial-low.S @@ -18,6 +18,7 @@ #include #include #include +#include #include .text @@ -69,7 +70,7 @@ gdbstub_io_rx_overflow: bra gdbstub_io_rx_done gdbstub_io_rx_enter: - or EPSW_IE|EPSW_IM_1,epsw + LOCAL_CHANGE_INTR_MASK_LEVEL(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL+1)) add -4,sp SAVE_ALL @@ -80,7 +81,7 @@ gdbstub_io_rx_enter: mov fp,d0 call gdbstub_rx_irq[],0 # gdbstub_rx_irq(regs,excep) - and ~EPSW_IE,epsw + LOCAL_CLI bclr 0x01,(gdbstub_busy) .globl gdbstub_return diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c index ae663dc717e9..0d5d63c91dc3 100644 --- a/arch/mn10300/kernel/gdb-io-serial.c +++ b/arch/mn10300/kernel/gdb-io-serial.c @@ -23,6 +23,7 @@ #include #include #include +#include /* * initialise the GDB stub @@ -45,22 +46,34 @@ void gdbstub_io_init(void) XIRQxICR(GDBPORT_SERIAL_IRQ) = 0; tmp = XIRQxICR(GDBPORT_SERIAL_IRQ); +#if CONFIG_GDBSTUB_IRQ_LEVEL == 0 IVAR0 = EXCEP_IRQ_LEVEL0; - set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler); +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 1 + IVAR1 = EXCEP_IRQ_LEVEL1; +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 2 + IVAR2 = EXCEP_IRQ_LEVEL2; +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 3 + IVAR3 = EXCEP_IRQ_LEVEL3; +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 4 + IVAR4 = EXCEP_IRQ_LEVEL4; +#elif CONFIG_GDBSTUB_IRQ_LEVEL == 5 + IVAR5 = EXCEP_IRQ_LEVEL5; +#else +#error "Unknown irq level for gdbstub." +#endif + + set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL), + gdbstub_io_rx_handler); XIRQxICR(GDBPORT_SERIAL_IRQ) &= ~GxICR_REQUEST; - XIRQxICR(GDBPORT_SERIAL_IRQ) = GxICR_ENABLE | GxICR_LEVEL_0; + XIRQxICR(GDBPORT_SERIAL_IRQ) = + GxICR_ENABLE | NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL); tmp = XIRQxICR(GDBPORT_SERIAL_IRQ); GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI; /* permit level 0 IRQs to take place */ - asm volatile( - " and %0,epsw \n" - " or %1,epsw \n" - : - : "i"(~EPSW_IM), "i"(EPSW_IE | EPSW_IM_1) - ); + local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); } /* @@ -87,6 +100,9 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock) { unsigned ix; u8 ch, st; +#if defined(CONFIG_MN10300_WD_TIMER) + int cpu; +#endif *_ch = 0xff; @@ -104,8 +120,9 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock) if (nonblock) return -EAGAIN; #ifdef CONFIG_MN10300_WD_TIMER - watchdog_alert_counter = 0; -#endif /* CONFIG_MN10300_WD_TIMER */ + for (cpu = 0; cpu < NR_CPUS; cpu++) + watchdog_alert_counter[cpu] = 0; +#endif goto try_again; } diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c index a560bbc3137d..97dfda23342c 100644 --- a/arch/mn10300/kernel/gdb-io-ttysm.c +++ b/arch/mn10300/kernel/gdb-io-ttysm.c @@ -58,9 +58,12 @@ void __init gdbstub_io_init(void) gdbstub_io_set_baud(115200); /* we want to get serial receive interrupts */ - set_intr_level(gdbstub_port->rx_irq, GxICR_LEVEL_0); - set_intr_level(gdbstub_port->tx_irq, GxICR_LEVEL_0); - set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler); + set_intr_level(gdbstub_port->rx_irq, + NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL)); + set_intr_level(gdbstub_port->tx_irq, + NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL)); + set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL), + gdbstub_io_rx_handler); *gdbstub_port->rx_icr |= GxICR_ENABLE; tmp = *gdbstub_port->rx_icr; @@ -84,12 +87,7 @@ void __init gdbstub_io_init(void) tmp = *gdbstub_port->_control; /* permit level 0 IRQs only */ - asm volatile( - " and %0,epsw \n" - " or %1,epsw \n" - : - : "i"(~EPSW_IM), "i"(EPSW_IE|EPSW_IM_1) - ); + local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); } /* @@ -184,6 +182,9 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock) { unsigned ix; u8 ch, st; +#if defined(CONFIG_MN10300_WD_TIMER) + int cpu; +#endif *_ch = 0xff; @@ -201,8 +202,9 @@ try_again: if (nonblock) return -EAGAIN; #ifdef CONFIG_MN10300_WD_TIMER - watchdog_alert_counter = 0; -#endif /* CONFIG_MN10300_WD_TIMER */ + for (cpu = 0; cpu < NR_CPUS; cpu++) + watchdog_alert_counter[cpu] = 0; +#endif goto try_again; } diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c index 41b11706c8ed..a5fc3f05309b 100644 --- a/arch/mn10300/kernel/gdb-stub.c +++ b/arch/mn10300/kernel/gdb-stub.c @@ -440,15 +440,11 @@ static const unsigned char gdbstub_insn_sizes[256] = static int __gdbstub_mark_bp(u8 *addr, int ix) { - if (addr < (u8 *) 0x70000000UL) - return 0; - /* 70000000-7fffffff: vmalloc area */ - if (addr < (u8 *) 0x80000000UL) + /* vmalloc area */ + if (((u8 *) VMALLOC_START <= addr) && (addr < (u8 *) VMALLOC_END)) goto okay; - if (addr < (u8 *) 0x8c000000UL) - return 0; - /* 8c000000-93ffffff: SRAM, SDRAM */ - if (addr < (u8 *) 0x94000000UL) + /* SRAM, SDRAM */ + if (((u8 *) 0x80000000UL <= addr) && (addr < (u8 *) 0xa0000000UL)) goto okay; return 0; @@ -1197,9 +1193,8 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) mn10300_set_gdbleds(1); asm volatile("mov mdr,%0" : "=d"(mdr)); - asm volatile("mov epsw,%0" : "=d"(epsw)); - asm volatile("mov %0,epsw" - :: "d"((epsw & ~EPSW_IM) | EPSW_IE | EPSW_IM_1)); + local_save_flags(epsw); + local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); gdbstub_store_fpu(); diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S index a81e34fba651..73e00fc78072 100644 --- a/arch/mn10300/kernel/head.S +++ b/arch/mn10300/kernel/head.S @@ -19,6 +19,12 @@ #include #include #include +#ifdef CONFIG_SMP +#include +#include +#include +#include +#endif /* CONFIG_SMP */ __HEAD @@ -30,17 +36,51 @@ .globl _start .type _start,@function _start: +#ifdef CONFIG_SMP + # + # If this is a secondary CPU (AP), then deal with that elsewhere + # + mov (CPUID),d3 + and CPUID_MASK,d3 + bne startup_secondary + + # + # We're dealing with the primary CPU (BP) here, then. + # Keep BP's D0,D1,D2 register for boot check. + # + + # Set up the Boot IPI for each secondary CPU + mov 0x1,a0 +loop_set_secondary_icr: + mov a0,a1 + asl CROSS_ICR_CPU_SHIFT,a1 + add CROSS_GxICR(SMP_BOOT_IRQ,0),a1 + movhu (a1),d3 + or GxICR_ENABLE|GxICR_LEVEL_0,d3 + movhu d3,(a1) + movhu (a1),d3 # flush + inc a0 + cmp NR_CPUS,a0 + bne loop_set_secondary_icr +#endif /* CONFIG_SMP */ + # save commandline pointer mov d0,a3 # preload the PGD pointer register mov swapper_pg_dir,d0 mov d0,(PTBR) + clr d0 + movbu d0,(PIDR) # turn on the TLBs mov MMUCTR_IIV|MMUCTR_DIV,d0 mov d0,(MMUCTR) +#ifdef CONFIG_AM34_2 + mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0 +#else mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0 +#endif mov d0,(MMUCTR) # turn on AM33v2 exception handling mode and set the trap table base @@ -51,6 +91,11 @@ _start: mov d0,(TBR) # invalidate and enable both of the caches +#ifdef CONFIG_SMP + mov ECHCTR,a0 + clr d0 + mov d0,(a0) +#endif mov CHCTR,a0 clr d0 movhu d0,(a0) # turn off first @@ -206,6 +251,44 @@ __no_parameters: call processor_init[],0 call unit_init[],0 +#ifdef CONFIG_SMP + # mark the primary CPU in cpu_boot_map + mov cpu_boot_map,a0 + mov 0x1,d0 + mov d0,(a0) + + # signal each secondary CPU to begin booting + mov 0x1,d2 # CPU ID + +loop_request_boot_secondary: + mov d2,a0 + # send SMP_BOOT_IPI to secondary CPU + asl CROSS_ICR_CPU_SHIFT,a0 + add CROSS_GxICR(SMP_BOOT_IRQ,0),a0 + movhu (a0),d0 + or GxICR_REQUEST|GxICR_DETECT,d0 + movhu d0,(a0) + movhu (a0),d0 # flush + + # wait up to 100ms for AP's IPI to be received + clr d3 +wait_on_secondary_boot: + mov DELAY_TIME_BOOT_IPI,d0 + call __delay[],0 + inc d3 + mov cpu_boot_map,a0 + mov (a0),d0 + lsr d2,d0 + btst 0x1,d0 + bne 1f + cmp TIME_OUT_COUNT_BOOT_IPI,d3 + bne wait_on_secondary_boot +1: + inc d2 + cmp NR_CPUS,d2 + bne loop_request_boot_secondary +#endif /* CONFIG_SMP */ + #ifdef CONFIG_GDBSTUB call gdbstub_init[],0 @@ -217,7 +300,118 @@ __gdbstub_pause: #endif jmp start_kernel - .size _start, _start-. + .size _start,.-_start + +############################################################################### +# +# Secondary CPU boot point +# +############################################################################### +#ifdef CONFIG_SMP +startup_secondary: + # preload the PGD pointer register + mov swapper_pg_dir,d0 + mov d0,(PTBR) + clr d0 + movbu d0,(PIDR) + + # turn on the TLBs + mov MMUCTR_IIV|MMUCTR_DIV,d0 + mov d0,(MMUCTR) +#ifdef CONFIG_AM34_2 + mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0 +#else + mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0 +#endif + mov d0,(MMUCTR) + + # turn on AM33v2 exception handling mode and set the trap table base + movhu (CPUP),d0 + or CPUP_EXM_AM33V2,d0 + movhu d0,(CPUP) + + # set the interrupt vector table + mov CONFIG_INTERRUPT_VECTOR_BASE,d0 + mov d0,(TBR) + + # invalidate and enable both of the caches + mov ECHCTR,a0 + clr d0 + mov d0,(a0) + mov CHCTR,a0 + clr d0 + movhu d0,(a0) # turn off first + mov CHCTR_ICINV|CHCTR_DCINV,d0 + movhu d0,(a0) + setlb + mov (a0),d0 + btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer) + lne + +#ifdef CONFIG_MN10300_CACHE_ENABLED +#ifdef CONFIG_MN10300_CACHE_WBACK +#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 +#else + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0 +#endif /* !NOWRALLOC */ +#else + mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 +#endif /* WBACK */ + movhu d0,(a0) # enable +#endif /* ENABLED */ + + # Clear the boot IPI interrupt for this CPU + movhu (GxICR(SMP_BOOT_IRQ)),d0 + and ~GxICR_REQUEST,d0 + movhu d0,(GxICR(SMP_BOOT_IRQ)) + movhu (GxICR(SMP_BOOT_IRQ)),d0 # flush + + /* get stack */ + mov CONFIG_INTERRUPT_VECTOR_BASE + CONFIG_BOOT_STACK_OFFSET,a0 + mov (CPUID),d0 + and CPUID_MASK,d0 + mulu CONFIG_BOOT_STACK_SIZE,d0 + sub d0,a0 + mov a0,sp + + # init interrupt for AP + call smp_prepare_cpu_init[],0 + + # mark this secondary CPU in cpu_boot_map + mov (CPUID),d0 + mov 0x1,d1 + asl d0,d1 + mov cpu_boot_map,a0 + bset d1,(a0) + + or EPSW_IE|EPSW_IM_1,epsw # permit level 0 interrupts + nop + nop +#ifdef CONFIG_MN10300_CACHE_WBACK + # flush the local cache if it's in writeback mode + call mn10300_local_dcache_flush_inv[],0 + setlb + mov (CHCTR),d0 + btst CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer) + lne +#endif + + # now sleep waiting for further instructions +secondary_sleep: + mov CPUM_SLEEP,d0 + movhu d0,(CPUM) + nop + nop + bra secondary_sleep + .size startup_secondary,.-startup_secondary +#endif /* CONFIG_SMP */ + +############################################################################### +# +# +# +############################################################################### ENTRY(__head_end) /* diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h index eee2eee86267..3b1f48b7e7f4 100644 --- a/arch/mn10300/kernel/internal.h +++ b/arch/mn10300/kernel/internal.h @@ -18,3 +18,15 @@ extern int kernel_thread_helper(int); * entry.S */ extern void ret_from_fork(struct task_struct *) __attribute__((noreturn)); + +/* + * smp-low.S + */ +#ifdef CONFIG_SMP +extern void mn10300_low_ipi_handler(void); +#endif + +/* + * time.c + */ +extern irqreturn_t local_timer_interrupt(void); diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index b5b970d2954a..80f15725ecad 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -12,11 +12,34 @@ #include #include #include +#include #include +#include -unsigned long __mn10300_irq_enabled_epsw = EPSW_IE | EPSW_IM_7; +#ifdef CONFIG_SMP +#undef GxICR +#define GxICR(X) CROSS_GxICR(X, irq_affinity_online[X]) + +#undef GxICR_u8 +#define GxICR_u8(X) CROSS_GxICR_u8(X, irq_affinity_online[X]) +#endif /* CONFIG_SMP */ + +unsigned long __mn10300_irq_enabled_epsw[NR_CPUS] __cacheline_aligned_in_smp = { + [0 ... NR_CPUS - 1] = EPSW_IE | EPSW_IM_7 +}; EXPORT_SYMBOL(__mn10300_irq_enabled_epsw); +#ifdef CONFIG_SMP +static char irq_affinity_online[NR_IRQS] = { + [0 ... NR_IRQS - 1] = 0 +}; + +#define NR_IRQ_WORDS ((NR_IRQS + 31) / 32) +static unsigned long irq_affinity_request[NR_IRQ_WORDS] = { + [0 ... NR_IRQ_WORDS - 1] = 0 +}; +#endif /* CONFIG_SMP */ + atomic_t irq_err_count; /* @@ -24,30 +47,65 @@ atomic_t irq_err_count; */ static void mn10300_cpupic_ack(unsigned int irq) { + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + GxICR_u8(irq) = GxICR_DETECT; + tmp = GxICR(irq); + arch_local_irq_restore(flags); +} + +static void __mask_and_set_icr(unsigned int irq, + unsigned int mask, unsigned int set) +{ + unsigned long flags; u16 tmp; - *(volatile u8 *) &GxICR(irq) = GxICR_DETECT; + + flags = arch_local_cli_save(); tmp = GxICR(irq); + GxICR(irq) = (tmp & mask) | set; + tmp = GxICR(irq); + arch_local_irq_restore(flags); } static void mn10300_cpupic_mask(unsigned int irq) { - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL); - tmp = GxICR(irq); + __mask_and_set_icr(irq, GxICR_LEVEL, 0); } static void mn10300_cpupic_mask_ack(unsigned int irq) { - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; - tmp = GxICR(irq); +#ifdef CONFIG_SMP + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + if (!test_and_clear_bit(irq, irq_affinity_request)) { + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; + tmp = GxICR(irq); + } else { + u16 tmp2; + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL); + tmp2 = GxICR(irq); + + irq_affinity_online[irq] = any_online_cpu(*irq_desc[irq].affinity); + GxICR(irq) = (tmp & (GxICR_LEVEL | GxICR_ENABLE)) | GxICR_DETECT; + tmp = GxICR(irq); + } + + arch_local_irq_restore(flags); +#else /* CONFIG_SMP */ + __mask_and_set_icr(irq, GxICR_LEVEL, GxICR_DETECT); +#endif /* CONFIG_SMP */ } static void mn10300_cpupic_unmask(unsigned int irq) { - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; - tmp = GxICR(irq); + __mask_and_set_icr(irq, GxICR_LEVEL, GxICR_ENABLE); } static void mn10300_cpupic_unmask_clear(unsigned int irq) @@ -56,11 +114,89 @@ static void mn10300_cpupic_unmask_clear(unsigned int irq) * device has ceased to assert its interrupt line and the interrupt * channel has been disabled in the PIC, so for level-triggered * interrupts we need to clear the request bit when we re-enable */ - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; - tmp = GxICR(irq); +#ifdef CONFIG_SMP + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + if (!test_and_clear_bit(irq, irq_affinity_request)) { + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; + tmp = GxICR(irq); + } else { + tmp = GxICR(irq); + + irq_affinity_online[irq] = any_online_cpu(*irq_desc[irq].affinity); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; + tmp = GxICR(irq); + } + + arch_local_irq_restore(flags); +#else /* CONFIG_SMP */ + __mask_and_set_icr(irq, GxICR_LEVEL, GxICR_ENABLE | GxICR_DETECT); +#endif /* CONFIG_SMP */ } +#ifdef CONFIG_SMP +static int +mn10300_cpupic_setaffinity(unsigned int irq, const struct cpumask *mask) +{ + unsigned long flags; + int err; + + flags = arch_local_cli_save(); + + /* check irq no */ + switch (irq) { + case TMJCIRQ: + case RESCHEDULE_IPI: + case CALL_FUNC_SINGLE_IPI: + case LOCAL_TIMER_IPI: + case FLUSH_CACHE_IPI: + case CALL_FUNCTION_NMI_IPI: + case GDB_NMI_IPI: +#ifdef CONFIG_MN10300_TTYSM0 + case SC0RXIRQ: + case SC0TXIRQ: +#ifdef CONFIG_MN10300_TTYSM0_TIMER8 + case TM8IRQ: +#elif CONFIG_MN10300_TTYSM0_TIMER2 + case TM2IRQ: +#endif /* CONFIG_MN10300_TTYSM0_TIMER8 */ +#endif /* CONFIG_MN10300_TTYSM0 */ + +#ifdef CONFIG_MN10300_TTYSM1 + case SC1RXIRQ: + case SC1TXIRQ: +#ifdef CONFIG_MN10300_TTYSM1_TIMER12 + case TM12IRQ: +#elif CONFIG_MN10300_TTYSM1_TIMER9 + case TM9IRQ: +#elif CONFIG_MN10300_TTYSM1_TIMER3 + case TM3IRQ: +#endif /* CONFIG_MN10300_TTYSM1_TIMER12 */ +#endif /* CONFIG_MN10300_TTYSM1 */ + +#ifdef CONFIG_MN10300_TTYSM2 + case SC2RXIRQ: + case SC2TXIRQ: + case TM10IRQ: +#endif /* CONFIG_MN10300_TTYSM2 */ + err = -1; + break; + + default: + set_bit(irq, irq_affinity_request); + err = 0; + break; + } + + arch_local_irq_restore(flags); + return err; +} +#endif /* CONFIG_SMP */ + /* * MN10300 PIC level-triggered IRQ handling. * @@ -79,6 +215,9 @@ static struct irq_chip mn10300_cpu_pic_level = { .mask = mn10300_cpupic_mask, .mask_ack = mn10300_cpupic_mask, .unmask = mn10300_cpupic_unmask_clear, +#ifdef CONFIG_SMP + .set_affinity = mn10300_cpupic_setaffinity, +#endif /* CONFIG_SMP */ }; /* @@ -94,6 +233,9 @@ static struct irq_chip mn10300_cpu_pic_edge = { .mask = mn10300_cpupic_mask, .mask_ack = mn10300_cpupic_mask_ack, .unmask = mn10300_cpupic_unmask, +#ifdef CONFIG_SMP + .set_affinity = mn10300_cpupic_setaffinity, +#endif /* CONFIG_SMP */ }; /* @@ -111,14 +253,34 @@ void ack_bad_irq(int irq) */ void set_intr_level(int irq, u16 level) { - u16 tmp; + BUG_ON(in_interrupt()); - if (in_interrupt()) - BUG(); + __mask_and_set_icr(irq, GxICR_ENABLE, level); +} - tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_ENABLE) | level; - tmp = GxICR(irq); +void mn10300_intc_set_level(unsigned int irq, unsigned int level) +{ + set_intr_level(irq, NUM2GxICR_LEVEL(level) & GxICR_LEVEL); +} + +void mn10300_intc_clear(unsigned int irq) +{ + __mask_and_set_icr(irq, GxICR_LEVEL | GxICR_ENABLE, GxICR_DETECT); +} + +void mn10300_intc_set(unsigned int irq) +{ + __mask_and_set_icr(irq, 0, GxICR_REQUEST | GxICR_DETECT); +} + +void mn10300_intc_enable(unsigned int irq) +{ + mn10300_cpupic_unmask(irq); +} + +void mn10300_intc_disable(unsigned int irq) +{ + mn10300_cpupic_mask(irq); } /* @@ -126,7 +288,7 @@ void set_intr_level(int irq, u16 level) * than before * - see Documentation/mn10300/features.txt */ -void set_intr_postackable(int irq) +void mn10300_set_lateack_irq_type(int irq) { set_irq_chip_and_handler(irq, &mn10300_cpu_pic_level, handle_level_irq); @@ -147,6 +309,7 @@ void __init init_IRQ(void) * interrupts */ set_irq_chip_and_handler(irq, &mn10300_cpu_pic_edge, handle_level_irq); + unit_init_IRQ(); } @@ -156,6 +319,7 @@ void __init init_IRQ(void) asmlinkage void do_IRQ(void) { unsigned long sp, epsw, irq_disabled_epsw, old_irq_enabled_epsw; + unsigned int cpu_id = smp_processor_id(); int irq; sp = current_stack_pointer(); @@ -163,12 +327,14 @@ asmlinkage void do_IRQ(void) /* make sure local_irq_enable() doesn't muck up the interrupt priority * setting in EPSW */ - old_irq_enabled_epsw = __mn10300_irq_enabled_epsw; + old_irq_enabled_epsw = __mn10300_irq_enabled_epsw[cpu_id]; local_save_flags(epsw); - __mn10300_irq_enabled_epsw = EPSW_IE | (EPSW_IM & epsw); + __mn10300_irq_enabled_epsw[cpu_id] = EPSW_IE | (EPSW_IM & epsw); irq_disabled_epsw = EPSW_IE | MN10300_CLI_LEVEL; - __IRQ_STAT(smp_processor_id(), __irq_count)++; +#ifdef CONFIG_MN10300_WD_TIMER + __IRQ_STAT(cpu_id, __irq_count)++; +#endif irq_enter(); @@ -188,7 +354,7 @@ asmlinkage void do_IRQ(void) local_irq_restore(epsw); } - __mn10300_irq_enabled_epsw = old_irq_enabled_epsw; + __mn10300_irq_enabled_epsw[cpu_id] = old_irq_enabled_epsw; irq_exit(); } @@ -239,11 +405,13 @@ int show_interrupts(struct seq_file *p, void *v) /* polish off with NMI and error counters */ case NR_IRQS: +#ifdef CONFIG_MN10300_WD_TIMER seq_printf(p, "NMI: "); for (j = 0; j < NR_CPUS; j++) if (cpu_online(j)) seq_printf(p, "%10u ", nmi_count(j)); seq_putc(p, '\n'); +#endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); break; @@ -251,3 +419,51 @@ int show_interrupts(struct seq_file *p, void *v) return 0; } + +#ifdef CONFIG_HOTPLUG_CPU +void migrate_irqs(void) +{ + irq_desc_t *desc; + int irq; + unsigned int self, new; + unsigned long flags; + + self = smp_processor_id(); + for (irq = 0; irq < NR_IRQS; irq++) { + desc = irq_desc + irq; + + if (desc->status == IRQ_PER_CPU) + continue; + + if (cpu_isset(self, irq_desc[irq].affinity) && + !cpus_intersects(irq_affinity[irq], cpu_online_map)) { + int cpu_id; + cpu_id = first_cpu(cpu_online_map); + cpu_set(cpu_id, irq_desc[irq].affinity); + } + /* We need to operate irq_affinity_online atomically. */ + arch_local_cli_save(flags); + if (irq_affinity_online[irq] == self) { + u16 x, tmp; + + x = CROSS_GxICR(irq, self); + CROSS_GxICR(irq, self) = x & GxICR_LEVEL; + tmp = CROSS_GxICR(irq, self); + + new = any_online_cpu(irq_desc[irq].affinity); + irq_affinity_online[irq] = new; + + CROSS_GxICR(irq, new) = + (x & GxICR_LEVEL) | GxICR_DETECT; + tmp = CROSS_GxICR(irq, new); + + x &= GxICR_LEVEL | GxICR_ENABLE; + if (CROSS_GxICR(irq, self) & GxICR_REQUEST) + x |= GxICR_REQUEST | GxICR_DETECT; + CROSS_GxICR(irq, new) = x; + tmp = CROSS_GxICR(irq, new); + } + arch_local_irq_restore(flags); + } +} +#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S index 66702d256610..dfc1b6f2fa9a 100644 --- a/arch/mn10300/kernel/mn10300-serial-low.S +++ b/arch/mn10300/kernel/mn10300-serial-low.S @@ -39,7 +39,7 @@ ############################################################################### .balign L1_CACHE_BYTES ENTRY(mn10300_serial_vdma_interrupt) - or EPSW_IE,psw # permit overriding by +# or EPSW_IE,psw # permit overriding by # debugging interrupts movm [d2,d3,a2,a3,exreg0],(sp) @@ -164,7 +164,7 @@ mnsc_vdma_tx_noint: rti mnsc_vdma_tx_empty: - mov +(GxICR_LEVEL_1|GxICR_DETECT),d2 + mov +(NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)|GxICR_DETECT),d2 movhu d2,(e3) # disable the interrupt movhu (e3),d2 # flush @@ -175,7 +175,7 @@ mnsc_vdma_tx_break: movhu (SCxCTR,e2),d2 # turn on break mode or SC01CTR_BKE,d2 movhu d2,(SCxCTR,e2) - mov +(GxICR_LEVEL_1|GxICR_DETECT),d2 + mov +(NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)|GxICR_DETECT),d2 movhu d2,(e3) # disable transmit interrupts on this # channel movhu (e3),d2 # flush diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c index db509dd80565..996384dba45d 100644 --- a/arch/mn10300/kernel/mn10300-serial.c +++ b/arch/mn10300/kernel/mn10300-serial.c @@ -44,6 +44,11 @@ static const char serial_revdate[] = "2007-11-06"; #include #include "mn10300-serial.h" +#ifdef CONFIG_SMP +#undef GxICR +#define GxICR(X) CROSS_GxICR(X, 0) +#endif /* CONFIG_SMP */ + #define kenter(FMT, ...) \ printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__) #define _enter(FMT, ...) \ @@ -57,6 +62,11 @@ static const char serial_revdate[] = "2007-11-06"; #define _proto(FMT, ...) \ no_printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__) +#ifndef CODMSB +/* c_cflag bit meaning */ +#define CODMSB 004000000000 /* change Transfer bit-order */ +#endif + #define NR_UARTS 3 #ifdef CONFIG_MN10300_TTYSM_CONSOLE @@ -152,26 +162,35 @@ struct mn10300_serial_port mn10300_serial_port_sif0 = { .name = "ttySM0", ._iobase = &SC0CTR, ._control = &SC0CTR, - ._status = (volatile u8 *) &SC0STR, + ._status = (volatile u8 *)&SC0STR, ._intr = &SC0ICR, ._rxb = &SC0RXB, ._txb = &SC0TXB, .rx_name = "ttySM0:Rx", .tx_name = "ttySM0:Tx", -#ifdef CONFIG_MN10300_TTYSM0_TIMER8 +#if defined(CONFIG_MN10300_TTYSM0_TIMER8) .tm_name = "ttySM0:Timer8", ._tmxmd = &TM8MD, ._tmxbr = &TM8BR, ._tmicr = &TM8ICR, .tm_irq = TM8IRQ, .div_timer = MNSCx_DIV_TIMER_16BIT, -#else /* CONFIG_MN10300_TTYSM0_TIMER2 */ +#elif defined(CONFIG_MN10300_TTYSM0_TIMER0) + .tm_name = "ttySM0:Timer0", + ._tmxmd = &TM0MD, + ._tmxbr = (volatile u16 *)&TM0BR, + ._tmicr = &TM0ICR, + .tm_irq = TM0IRQ, + .div_timer = MNSCx_DIV_TIMER_8BIT, +#elif defined(CONFIG_MN10300_TTYSM0_TIMER2) .tm_name = "ttySM0:Timer2", ._tmxmd = &TM2MD, - ._tmxbr = (volatile u16 *) &TM2BR, + ._tmxbr = (volatile u16 *)&TM2BR, ._tmicr = &TM2ICR, .tm_irq = TM2IRQ, .div_timer = MNSCx_DIV_TIMER_8BIT, +#else +#error "Unknown config for ttySM0" #endif .rx_irq = SC0RXIRQ, .tx_irq = SC0TXIRQ, @@ -205,26 +224,35 @@ struct mn10300_serial_port mn10300_serial_port_sif1 = { .name = "ttySM1", ._iobase = &SC1CTR, ._control = &SC1CTR, - ._status = (volatile u8 *) &SC1STR, + ._status = (volatile u8 *)&SC1STR, ._intr = &SC1ICR, ._rxb = &SC1RXB, ._txb = &SC1TXB, .rx_name = "ttySM1:Rx", .tx_name = "ttySM1:Tx", -#ifdef CONFIG_MN10300_TTYSM1_TIMER9 +#if defined(CONFIG_MN10300_TTYSM1_TIMER9) .tm_name = "ttySM1:Timer9", ._tmxmd = &TM9MD, ._tmxbr = &TM9BR, ._tmicr = &TM9ICR, .tm_irq = TM9IRQ, .div_timer = MNSCx_DIV_TIMER_16BIT, -#else /* CONFIG_MN10300_TTYSM1_TIMER3 */ +#elif defined(CONFIG_MN10300_TTYSM1_TIMER3) .tm_name = "ttySM1:Timer3", ._tmxmd = &TM3MD, - ._tmxbr = (volatile u16 *) &TM3BR, + ._tmxbr = (volatile u16 *)&TM3BR, ._tmicr = &TM3ICR, .tm_irq = TM3IRQ, .div_timer = MNSCx_DIV_TIMER_8BIT, +#elif defined(CONFIG_MN10300_TTYSM1_TIMER12) + .tm_name = "ttySM1/Timer12", + ._tmxmd = &TM12MD, + ._tmxbr = &TM12BR, + ._tmicr = &TM12ICR, + .tm_irq = TM12IRQ, + .div_timer = MNSCx_DIV_TIMER_16BIT, +#else +#error "Unknown config for ttySM1" #endif .rx_irq = SC1RXIRQ, .tx_irq = SC1TXIRQ, @@ -260,20 +288,45 @@ struct mn10300_serial_port mn10300_serial_port_sif2 = { .uart.lock = __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock), .name = "ttySM2", - .rx_name = "ttySM2:Rx", - .tx_name = "ttySM2:Tx", - .tm_name = "ttySM2:Timer10", ._iobase = &SC2CTR, ._control = &SC2CTR, - ._status = &SC2STR, + ._status = (volatile u8 *)&SC2STR, ._intr = &SC2ICR, ._rxb = &SC2RXB, ._txb = &SC2TXB, + .rx_name = "ttySM2:Rx", + .tx_name = "ttySM2:Tx", +#if defined(CONFIG_MN10300_TTYSM2_TIMER10) + .tm_name = "ttySM2/Timer10", ._tmxmd = &TM10MD, ._tmxbr = &TM10BR, ._tmicr = &TM10ICR, .tm_irq = TM10IRQ, .div_timer = MNSCx_DIV_TIMER_16BIT, +#elif defined(CONFIG_MN10300_TTYSM2_TIMER9) + .tm_name = "ttySM2/Timer9", + ._tmxmd = &TM9MD, + ._tmxbr = &TM9BR, + ._tmicr = &TM9ICR, + .tm_irq = TM9IRQ, + .div_timer = MNSCx_DIV_TIMER_16BIT, +#elif defined(CONFIG_MN10300_TTYSM2_TIMER1) + .tm_name = "ttySM2/Timer1", + ._tmxmd = &TM1MD, + ._tmxbr = (volatile u16 *)&TM1BR, + ._tmicr = &TM1ICR, + .tm_irq = TM1IRQ, + .div_timer = MNSCx_DIV_TIMER_8BIT, +#elif defined(CONFIG_MN10300_TTYSM2_TIMER3) + .tm_name = "ttySM2/Timer3", + ._tmxmd = &TM3MD, + ._tmxbr = (volatile u16 *)&TM3BR, + ._tmicr = &TM3ICR, + .tm_irq = TM3IRQ, + .div_timer = MNSCx_DIV_TIMER_8BIT, +#else +#error "Unknown config for ttySM2" +#endif .rx_irq = SC2RXIRQ, .tx_irq = SC2TXIRQ, .rx_icr = &GxICR(SC2RXIRQ), @@ -322,9 +375,13 @@ struct mn10300_serial_port *mn10300_serial_ports[NR_UARTS + 1] = { */ static void mn10300_serial_mask_ack(unsigned int irq) { + unsigned long flags; u16 tmp; + + flags = arch_local_cli_save(); GxICR(irq) = GxICR_LEVEL_6; tmp = GxICR(irq); /* flush write buffer */ + arch_local_irq_restore(flags); } static void mn10300_serial_nop(unsigned int irq) @@ -348,23 +405,36 @@ struct mn10300_serial_int mn10300_serial_int_tbl[NR_IRQS]; static void mn10300_serial_dis_tx_intr(struct mn10300_serial_port *port) { + unsigned long flags; u16 x; - *port->tx_icr = GxICR_LEVEL_1 | GxICR_DETECT; + + flags = arch_local_cli_save(); + *port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); x = *port->tx_icr; + arch_local_irq_restore(flags); } static void mn10300_serial_en_tx_intr(struct mn10300_serial_port *port) { + unsigned long flags; u16 x; - *port->tx_icr = GxICR_LEVEL_1 | GxICR_ENABLE; + + flags = arch_local_cli_save(); + *port->tx_icr = + NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL) | GxICR_ENABLE; x = *port->tx_icr; + arch_local_irq_restore(flags); } static void mn10300_serial_dis_rx_intr(struct mn10300_serial_port *port) { + unsigned long flags; u16 x; - *port->rx_icr = GxICR_LEVEL_1 | GxICR_DETECT; + + flags = arch_local_cli_save(); + *port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); x = *port->rx_icr; + arch_local_irq_restore(flags); } /* @@ -650,7 +720,7 @@ static unsigned int mn10300_serial_tx_empty(struct uart_port *_port) static void mn10300_serial_set_mctrl(struct uart_port *_port, unsigned int mctrl) { - struct mn10300_serial_port *port = + struct mn10300_serial_port *port __attribute__ ((unused)) = container_of(_port, struct mn10300_serial_port, uart); _enter("%s,%x", port->name, mctrl); @@ -706,6 +776,7 @@ static void mn10300_serial_start_tx(struct uart_port *_port) UART_XMIT_SIZE)); /* kick the virtual DMA controller */ + arch_local_cli(); x = *port->tx_icr; x |= GxICR_ENABLE; @@ -716,10 +787,14 @@ static void mn10300_serial_start_tx(struct uart_port *_port) _debug("CTR=%04hx ICR=%02hx STR=%04x TMD=%02hx TBR=%04hx ICR=%04hx", *port->_control, *port->_intr, *port->_status, - *port->_tmxmd, *port->_tmxbr, *port->tx_icr); + *port->_tmxmd, + (port->div_timer == MNSCx_DIV_TIMER_8BIT) ? + *(volatile u8 *)port->_tmxbr : *port->_tmxbr, + *port->tx_icr); *port->tx_icr = x; x = *port->tx_icr; + arch_local_sti(); } /* @@ -842,8 +917,10 @@ static int mn10300_serial_startup(struct uart_port *_port) pint->port = port; pint->vdma = mn10300_serial_vdma_tx_handler; - set_intr_level(port->rx_irq, GxICR_LEVEL_1); - set_intr_level(port->tx_irq, GxICR_LEVEL_1); + set_intr_level(port->rx_irq, + NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)); + set_intr_level(port->tx_irq, + NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)); set_irq_chip(port->tm_irq, &mn10300_serial_pic); if (request_irq(port->rx_irq, mn10300_serial_interrupt, @@ -876,6 +953,7 @@ error: */ static void mn10300_serial_shutdown(struct uart_port *_port) { + u16 x; struct mn10300_serial_port *port = container_of(_port, struct mn10300_serial_port, uart); @@ -897,8 +975,12 @@ static void mn10300_serial_shutdown(struct uart_port *_port) free_irq(port->rx_irq, port); free_irq(port->tx_irq, port); - *port->rx_icr = GxICR_LEVEL_1; - *port->tx_icr = GxICR_LEVEL_1; + arch_local_cli(); + *port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); + x = *port->rx_icr; + *port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); + x = *port->tx_icr; + arch_local_sti(); } /* @@ -947,11 +1029,66 @@ static void mn10300_serial_change_speed(struct mn10300_serial_port *port, /* Determine divisor based on baud rate */ battempt = 0; - if (div_timer == MNSCx_DIV_TIMER_16BIT) - scxctr |= SC0CTR_CK_TM8UFLOW_8; /* ( == SC1CTR_CK_TM9UFLOW_8 - * == SC2CTR_CK_TM10UFLOW) */ - else if (div_timer == MNSCx_DIV_TIMER_8BIT) + switch (port->uart.line) { +#ifdef CONFIG_MN10300_TTYSM0 + case 0: /* ttySM0 */ +#if defined(CONFIG_MN10300_TTYSM0_TIMER8) + scxctr |= SC0CTR_CK_TM8UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM0_TIMER0) + scxctr |= SC0CTR_CK_TM0UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM0_TIMER2) scxctr |= SC0CTR_CK_TM2UFLOW_8; +#else +#error "Unknown config for ttySM0" +#endif + break; +#endif /* CONFIG_MN10300_TTYSM0 */ + +#ifdef CONFIG_MN10300_TTYSM1 + case 1: /* ttySM1 */ +#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) +#if defined(CONFIG_MN10300_TTYSM1_TIMER9) + scxctr |= SC1CTR_CK_TM9UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM1_TIMER3) + scxctr |= SC1CTR_CK_TM3UFLOW_8; +#else +#error "Unknown config for ttySM1" +#endif +#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ +#if defined(CONFIG_MN10300_TTYSM1_TIMER12) + scxctr |= SC1CTR_CK_TM12UFLOW_8; +#else +#error "Unknown config for ttySM1" +#endif +#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ + break; +#endif /* CONFIG_MN10300_TTYSM1 */ + +#ifdef CONFIG_MN10300_TTYSM2 + case 2: /* ttySM2 */ +#if defined(CONFIG_AM33_2) +#if defined(CONFIG_MN10300_TTYSM2_TIMER10) + scxctr |= SC2CTR_CK_TM10UFLOW; +#else +#error "Unknown config for ttySM2" +#endif +#else /* CONFIG_AM33_2 */ +#if defined(CONFIG_MN10300_TTYSM2_TIMER9) + scxctr |= SC2CTR_CK_TM9UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM2_TIMER1) + scxctr |= SC2CTR_CK_TM1UFLOW_8; +#elif defined(CONFIG_MN10300_TTYSM2_TIMER3) + scxctr |= SC2CTR_CK_TM3UFLOW_8; +#else +#error "Unknown config for ttySM2" +#endif +#endif /* CONFIG_AM33_2 */ + break; +#endif /* CONFIG_MN10300_TTYSM2 */ + + default: + break; + } try_alternative: baud = uart_get_baud_rate(&port->uart, new, old, 0, @@ -1195,6 +1332,12 @@ static void mn10300_serial_set_termios(struct uart_port *_port, ctr &= ~SC2CTR_TWE; *port->_control = ctr; } + + /* change Transfer bit-order (LSB/MSB) */ + if (new->c_cflag & CODMSB) + *port->_control |= SC01CTR_OD_MSBFIRST; /* MSB MODE */ + else + *port->_control &= ~SC01CTR_OD_MSBFIRST; /* LSB MODE */ } /* @@ -1302,11 +1445,16 @@ static int __init mn10300_serial_init(void) printk(KERN_INFO "%s version %s (%s)\n", serial_name, serial_version, serial_revdate); -#ifdef CONFIG_MN10300_TTYSM2 - SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */ +#if defined(CONFIG_MN10300_TTYSM2) && defined(CONFIG_AM33_2) + { + int tmp; + SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */ + tmp = SC2TIM; + } #endif - set_intr_stub(EXCEP_IRQ_LEVEL1, mn10300_serial_vdma_interrupt); + set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL), + mn10300_serial_vdma_interrupt); ret = uart_register_driver(&mn10300_serial_driver); if (!ret) { @@ -1366,9 +1514,11 @@ static void mn10300_serial_console_write(struct console *co, port = mn10300_serial_ports[co->index]; /* firstly hijack the serial port from the "virtual DMA" controller */ + arch_local_cli(); txicr = *port->tx_icr; - *port->tx_icr = GxICR_LEVEL_1; + *port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL); tmp = *port->tx_icr; + arch_local_sti(); /* the transmitter may be disabled */ scxctr = *port->_control; @@ -1422,8 +1572,10 @@ static void mn10300_serial_console_write(struct console *co, if (!(scxctr & SC01CTR_TXE)) *port->_control = scxctr; + arch_local_cli(); *port->tx_icr = txicr; tmp = *port->tx_icr; + arch_local_sti(); } /* diff --git a/arch/mn10300/kernel/mn10300-watchdog-low.S b/arch/mn10300/kernel/mn10300-watchdog-low.S index 996244745cca..f2f5c9cfaabd 100644 --- a/arch/mn10300/kernel/mn10300-watchdog-low.S +++ b/arch/mn10300/kernel/mn10300-watchdog-low.S @@ -16,6 +16,7 @@ #include #include #include +#include .text @@ -53,7 +54,13 @@ watchdog_handler: .type touch_nmi_watchdog,@function touch_nmi_watchdog: clr d0 - mov d0,(watchdog_alert_counter) + clr d1 + mov watchdog_alert_counter, a0 + setlb + mov d0, (a0+) + inc d1 + cmp NR_CPUS, d1 + lne ret [],0 .size touch_nmi_watchdog,.-touch_nmi_watchdog diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c index f362d9d138f1..965dd61656c3 100644 --- a/arch/mn10300/kernel/mn10300-watchdog.c +++ b/arch/mn10300/kernel/mn10300-watchdog.c @@ -30,7 +30,7 @@ static DEFINE_SPINLOCK(watchdog_print_lock); static unsigned int watchdog; static unsigned int watchdog_hz = 1; -unsigned int watchdog_alert_counter; +unsigned int watchdog_alert_counter[NR_CPUS]; EXPORT_SYMBOL(touch_nmi_watchdog); @@ -39,9 +39,6 @@ EXPORT_SYMBOL(touch_nmi_watchdog); * is to check its timer makes IRQ counts. If they are not * changing then that CPU has some problem. * - * as these watchdog NMI IRQs are generated on every CPU, we only - * have to check the current processor. - * * since NMIs dont listen to _any_ locks, we have to be extremely * careful not to rely on unsafe variables. The printk might lock * up though, so we have to break up any console locks first ... @@ -69,8 +66,8 @@ int __init check_watchdog(void) printk(KERN_INFO "OK.\n"); - /* now that we know it works we can reduce NMI frequency to - * something more reasonable; makes a difference in some configs + /* now that we know it works we can reduce NMI frequency to something + * more reasonable; makes a difference in some configs */ watchdog_hz = 1; @@ -121,15 +118,22 @@ void __init watchdog_go(void) } } +#ifdef CONFIG_SMP +static void watchdog_dump_register(void *dummy) +{ + printk(KERN_ERR "--- Register Dump (CPU%d) ---\n", CPUID); + show_registers(__frame); +} +#endif + asmlinkage void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep) { - /* * Since current-> is always on the stack, and we always switch * the stack NMI-atomically, it's safe to use smp_processor_id(). */ - int sum, cpu = smp_processor_id(); + int sum, cpu; int irq = NMIIRQ; u8 wdt, tmp; @@ -138,43 +142,61 @@ void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep) tmp = WDCTR; NMICR = NMICR_WDIF; - nmi_count(cpu)++; + nmi_count(smp_processor_id())++; kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); - sum = irq_stat[cpu].__irq_count; - - if (last_irq_sums[cpu] == sum) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - watchdog_alert_counter++; - if (watchdog_alert_counter == 5 * watchdog_hz) { - spin_lock(&watchdog_print_lock); + + for_each_online_cpu(cpu) { + + sum = irq_stat[cpu].__irq_count; + + if ((last_irq_sums[cpu] == sum) +#if defined(CONFIG_GDBSTUB) && defined(CONFIG_SMP) + && !(CHK_GDBSTUB_BUSY() + || atomic_read(&cpu_doing_single_step)) +#endif + ) { /* - * We are in trouble anyway, lets at least try - * to get a message out. + * Ayiee, looks like this CPU is stuck ... + * wait a few IRQs (5 seconds) before doing the oops ... */ - bust_spinlocks(1); - printk(KERN_ERR - "NMI Watchdog detected LOCKUP on CPU%d," - " pc %08lx, registers:\n", - cpu, regs->pc); - show_registers(regs); - printk("console shuts up ...\n"); - console_silent(); - spin_unlock(&watchdog_print_lock); - bust_spinlocks(0); + watchdog_alert_counter[cpu]++; + if (watchdog_alert_counter[cpu] == 5 * watchdog_hz) { + spin_lock(&watchdog_print_lock); + /* + * We are in trouble anyway, lets at least try + * to get a message out. + */ + bust_spinlocks(1); + printk(KERN_ERR + "NMI Watchdog detected LOCKUP on CPU%d," + " pc %08lx, registers:\n", + cpu, regs->pc); +#ifdef CONFIG_SMP + printk(KERN_ERR + "--- Register Dump (CPU%d) ---\n", + CPUID); +#endif + show_registers(regs); +#ifdef CONFIG_SMP + smp_nmi_call_function(watchdog_dump_register, + NULL, 1); +#endif + printk(KERN_NOTICE "console shuts up ...\n"); + console_silent(); + spin_unlock(&watchdog_print_lock); + bust_spinlocks(0); #ifdef CONFIG_GDBSTUB - if (gdbstub_busy) - gdbstub_exception(regs, excep); - else - gdbstub_intercept(regs, excep); + if (CHK_GDBSTUB_BUSY_AND_ACTIVE()) + gdbstub_exception(regs, excep); + else + gdbstub_intercept(regs, excep); #endif - do_exit(SIGSEGV); + do_exit(SIGSEGV); + } + } else { + last_irq_sums[cpu] = sum; + watchdog_alert_counter[cpu] = 0; } - } else { - last_irq_sums[cpu] = sum; - watchdog_alert_counter = 0; } WDCTR = wdt | WDCTR_WDRST; diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c index 243e33cd874b..b2e85ed73a54 100644 --- a/arch/mn10300/kernel/process.c +++ b/arch/mn10300/kernel/process.c @@ -57,6 +57,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk) void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); +#if !defined(CONFIG_SMP) || defined(CONFIG_HOTPLUG_CPU) /* * we use this if we don't have any better idle routine */ @@ -69,6 +70,35 @@ static void default_idle(void) local_irq_enable(); } +#else /* !CONFIG_SMP || CONFIG_HOTPLUG_CPU */ +/* + * On SMP it's slightly faster (but much more power-consuming!) + * to poll the ->work.need_resched flag instead of waiting for the + * cross-CPU IPI to arrive. Use this option with caution. + */ +static inline void poll_idle(void) +{ + int oldval; + + local_irq_enable(); + + /* + * Deal with another CPU just having chosen a thread to + * run here: + */ + oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); + + if (!oldval) { + set_thread_flag(TIF_POLLING_NRFLAG); + while (!need_resched()) + cpu_relax(); + clear_thread_flag(TIF_POLLING_NRFLAG); + } else { + set_need_resched(); + } +} +#endif /* !CONFIG_SMP || CONFIG_HOTPLUG_CPU */ + /* * the idle thread * - there's no useful work to be done, so just try to conserve power and have @@ -77,8 +107,6 @@ static void default_idle(void) */ void cpu_idle(void) { - int cpu = smp_processor_id(); - /* endless idle loop with no priority at all */ for (;;) { while (!need_resched()) { @@ -86,8 +114,13 @@ void cpu_idle(void) smp_rmb(); idle = pm_idle; - if (!idle) + if (!idle) { +#if defined(CONFIG_SMP) && !defined(CONFIG_HOTPLUG_CPU) + idle = poll_idle; +#else /* CONFIG_SMP && !CONFIG_HOTPLUG_CPU */ idle = default_idle; +#endif /* CONFIG_SMP && !CONFIG_HOTPLUG_CPU */ + } idle(); } @@ -233,7 +266,7 @@ int copy_thread(unsigned long clone_flags, } /* set up things up so the scheduler can start the new task */ - p->thread.__frame = c_kregs; + p->thread.frame = c_kregs; p->thread.a3 = (unsigned long) c_kregs; p->thread.sp = c_ksp; p->thread.pc = (unsigned long) ret_from_fork; diff --git a/arch/mn10300/kernel/profile.c b/arch/mn10300/kernel/profile.c index 20d7d0306b16..4f342f75d00c 100644 --- a/arch/mn10300/kernel/profile.c +++ b/arch/mn10300/kernel/profile.c @@ -41,7 +41,7 @@ static __init int profile_init(void) tmp = TM11ICR; printk(KERN_INFO "Profiling initiated on timer 11, priority 0, %uHz\n", - mn10300_ioclk / 8 / (TM11BR + 1)); + MN10300_IOCLK / 8 / (TM11BR + 1)); printk(KERN_INFO "Profile histogram stored %p-%p\n", prof_buffer, (u8 *)(prof_buffer + prof_len) - 1); diff --git a/arch/mn10300/kernel/rtc.c b/arch/mn10300/kernel/rtc.c index 4eef0e7224f6..e9e20f9a4dd3 100644 --- a/arch/mn10300/kernel/rtc.c +++ b/arch/mn10300/kernel/rtc.c @@ -20,18 +20,22 @@ DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); -/* time for RTC to update itself in ioclks */ -static unsigned long mn10300_rtc_update_period; - +/* + * Read the current RTC time + */ void read_persistent_clock(struct timespec *ts) { struct rtc_time tm; get_rtc_time(&tm); - ts->tv_sec = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); ts->tv_nsec = 0; + ts->tv_sec = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec); + + /* if rtc is way off in the past, set something reasonable */ + if (ts->tv_sec < 0) + ts->tv_sec = mktime(2009, 1, 1, 12, 0, 0); } /* @@ -115,39 +119,14 @@ int update_persistent_clock(struct timespec now) */ void __init calibrate_clock(void) { - unsigned long count0, counth, count1; unsigned char status; /* make sure the RTC is running and is set to operate in 24hr mode */ status = RTSRC; RTCRB |= RTCRB_SET; RTCRB |= RTCRB_TM_24HR; + RTCRB &= ~RTCRB_DM_BINARY; RTCRA |= RTCRA_DVR; RTCRA &= ~RTCRA_DVR; RTCRB &= ~RTCRB_SET; - - /* work out the clock speed by counting clock cycles between ends of - * the RTC update cycle - track the RTC through one complete update - * cycle (1 second) - */ - startup_timestamp_counter(); - - while (!(RTCRA & RTCRA_UIP)) {} - while ((RTCRA & RTCRA_UIP)) {} - - count0 = TMTSCBC; - - while (!(RTCRA & RTCRA_UIP)) {} - - counth = TMTSCBC; - - while ((RTCRA & RTCRA_UIP)) {} - - count1 = TMTSCBC; - - shutdown_timestamp_counter(); - - MN10300_TSCCLK = count0 - count1; /* the timers count down */ - mn10300_rtc_update_period = counth - count1; - MN10300_TSC_PER_HZ = MN10300_TSCCLK / HZ; } diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index d464affcba0e..12514570ed5d 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -30,7 +31,6 @@ #include #include #include -#include #include #include @@ -64,11 +64,13 @@ unsigned long memory_size; struct thread_info *__current_ti = &init_thread_union.thread_info; struct task_struct *__current = &init_task; -#define mn10300_known_cpus 3 +#define mn10300_known_cpus 5 static const char *const mn10300_cputypes[] = { - "am33v1", - "am33v2", - "am34v1", + "am33-1", + "am33-2", + "am34-1", + "am33-3", + "am34-2", "unknown" }; @@ -123,6 +125,7 @@ void __init setup_arch(char **cmdline_p) cpu_init(); unit_setup(); + smp_init_cpus(); parse_mem_cmdline(cmdline_p); init_mm.start_code = (unsigned long)&_text; @@ -179,7 +182,6 @@ void __init setup_arch(char **cmdline_p) void __init cpu_init(void) { unsigned long cpurev = CPUREV, type; - unsigned long base, size; type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S; if (type > mn10300_known_cpus) @@ -189,47 +191,46 @@ void __init cpu_init(void) mn10300_cputypes[type], (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S); - /* determine the memory size and base from the memory controller regs */ - memory_size = 0; - - base = SDBASE(0); - if (base & SDBASE_CE) { - size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; - size = ~size + 1; - base &= SDBASE_CBA; + get_mem_info(&phys_memory_base, &memory_size); + phys_memory_end = phys_memory_base + memory_size; - printk(KERN_INFO "SDRAM[0]: %luMb @%08lx\n", size >> 20, base); - memory_size += size; - phys_memory_base = base; - } + fpu_init_state(); +} - base = SDBASE(1); - if (base & SDBASE_CE) { - size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; - size = ~size + 1; - base &= SDBASE_CBA; +static struct cpu cpu_devices[NR_CPUS]; - printk(KERN_INFO "SDRAM[1]: %luMb @%08lx\n", size >> 20, base); - memory_size += size; - if (phys_memory_base == 0) - phys_memory_base = base; - } +static int __init topology_init(void) +{ + int i; - phys_memory_end = phys_memory_base + memory_size; + for_each_present_cpu(i) + register_cpu(&cpu_devices[i], i); -#ifdef CONFIG_FPU - fpu_init_state(); -#endif + return 0; } +subsys_initcall(topology_init); + /* * Get CPU information for use by the procfs. */ static int show_cpuinfo(struct seq_file *m, void *v) { +#ifdef CONFIG_SMP + struct mn10300_cpuinfo *c = v; + unsigned long cpu_id = c - cpu_data; + unsigned long cpurev = c->type, type, icachesz, dcachesz; +#else /* CONFIG_SMP */ + unsigned long cpu_id = 0; unsigned long cpurev = CPUREV, type, icachesz, dcachesz; +#endif /* CONFIG_SMP */ - type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S; +#ifdef CONFIG_SMP + if (!cpu_online(cpu_id)) + return 0; +#endif + + type = (cpurev & CPUREV_TYPE) >> CPUREV_TYPE_S; if (type > mn10300_known_cpus) type = mn10300_known_cpus; @@ -244,13 +245,14 @@ static int show_cpuinfo(struct seq_file *m, void *v) 1024; seq_printf(m, - "processor : 0\n" + "processor : %ld\n" "vendor_id : Matsushita\n" "cpu core : %s\n" "cpu rev : %lu\n" "model name : " PROCESSOR_MODEL_NAME "\n" "icache size: %lu\n" "dcache size: %lu\n", + cpu_id, mn10300_cputypes[type], (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S, icachesz, @@ -262,8 +264,13 @@ static int show_cpuinfo(struct seq_file *m, void *v) "bogomips : %lu.%02lu\n\n", MN10300_IOCLK / 1000000, (MN10300_IOCLK / 10000) % 100, +#ifdef CONFIG_SMP + c->loops_per_jiffy / (500000 / HZ), + (c->loops_per_jiffy / (5000 / HZ)) % 100 +#else /* CONFIG_SMP */ loops_per_jiffy / (500000 / HZ), (loops_per_jiffy / (5000 / HZ)) % 100 +#endif /* CONFIG_SMP */ ); return 0; diff --git a/arch/mn10300/kernel/smp-low.S b/arch/mn10300/kernel/smp-low.S new file mode 100644 index 000000000000..72938cefc05e --- /dev/null +++ b/arch/mn10300/kernel/smp-low.S @@ -0,0 +1,97 @@ +/* SMP IPI low-level handler + * + * Copyright (C) 2006-2007 Matsushita Electric Industrial Co., Ltd. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + + .am33_2 + +############################################################################### +# +# IPI interrupt handler +# +############################################################################### + .globl mn10300_low_ipi_handler +mn10300_low_ipi_handler: + add -4,sp + mov d0,(sp) + movhu (IAGR),d0 + and IAGR_GN,d0 + lsr 0x2,d0 +#ifdef CONFIG_MN10300_CACHE_ENABLED + cmp FLUSH_CACHE_IPI,d0 + beq mn10300_flush_cache_ipi +#endif + cmp SMP_BOOT_IRQ,d0 + beq mn10300_smp_boot_ipi + /* OTHERS */ + mov (sp),d0 + add 4,sp +#ifdef CONFIG_GDBSTUB + jmp gdbstub_io_rx_handler +#else + jmp end +#endif + +############################################################################### +# +# Cache flush IPI interrupt handler +# +############################################################################### +#ifdef CONFIG_MN10300_CACHE_ENABLED +mn10300_flush_cache_ipi: + mov (sp),d0 + add 4,sp + + /* FLUSH_CACHE_IPI */ + add -4,sp + SAVE_ALL + mov GxICR_DETECT,d2 + movbu d2,(GxICR(FLUSH_CACHE_IPI)) # ACK the interrupt + movhu (GxICR(FLUSH_CACHE_IPI)),d2 + call smp_cache_interrupt[],0 + RESTORE_ALL + jmp end +#endif + +############################################################################### +# +# SMP boot CPU IPI interrupt handler +# +############################################################################### +mn10300_smp_boot_ipi: + /* clear interrupt */ + movhu (GxICR(SMP_BOOT_IRQ)),d0 + and ~GxICR_REQUEST,d0 + movhu d0,(GxICR(SMP_BOOT_IRQ)) + mov (sp),d0 + add 4,sp + + # get stack + mov (CPUID),a0 + add -1,a0 + add a0,a0 + add a0,a0 + mov (start_stack,a0),a0 + mov a0,sp + jmp initialize_secondary + + +# Jump here after RTI to suppress the icache lookahead +end: diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c new file mode 100644 index 000000000000..b80234c28e0d --- /dev/null +++ b/arch/mn10300/kernel/smp.c @@ -0,0 +1,1141 @@ +/* SMP support routines. + * + * Copyright (C) 2006-2008 Panasonic Corporation + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "internal.h" + +#ifdef CONFIG_HOTPLUG_CPU +#include +#include + +static unsigned long sleep_mode[NR_CPUS]; + +static void run_sleep_cpu(unsigned int cpu); +static void run_wakeup_cpu(unsigned int cpu); +#endif /* CONFIG_HOTPLUG_CPU */ + +/* + * Debug Message function + */ + +#undef DEBUG_SMP +#ifdef DEBUG_SMP +#define Dprintk(fmt, ...) printk(KERN_DEBUG fmt, ##__VA_ARGS__) +#else +#define Dprintk(fmt, ...) no_printk(KERN_DEBUG fmt, ##__VA_ARGS__) +#endif + +/* timeout value in msec for smp_nmi_call_function. zero is no timeout. */ +#define CALL_FUNCTION_NMI_IPI_TIMEOUT 0 + +/* + * Structure and data for smp_nmi_call_function(). + */ +struct nmi_call_data_struct { + smp_call_func_t func; + void *info; + cpumask_t started; + cpumask_t finished; + int wait; + char size_alignment[0] + __attribute__ ((__aligned__(SMP_CACHE_BYTES))); +} __attribute__ ((__aligned__(SMP_CACHE_BYTES))); + +static DEFINE_SPINLOCK(smp_nmi_call_lock); +static struct nmi_call_data_struct *nmi_call_data; + +/* + * Data structures and variables + */ +static cpumask_t cpu_callin_map; /* Bitmask of callin CPUs */ +static cpumask_t cpu_callout_map; /* Bitmask of callout CPUs */ +cpumask_t cpu_boot_map; /* Bitmask of boot APs */ +unsigned long start_stack[NR_CPUS - 1]; + +/* + * Per CPU parameters + */ +struct mn10300_cpuinfo cpu_data[NR_CPUS] __cacheline_aligned; + +static int cpucount; /* The count of boot CPUs */ +static cpumask_t smp_commenced_mask; +cpumask_t cpu_initialized __initdata = CPU_MASK_NONE; + +/* + * Function Prototypes + */ +static int do_boot_cpu(int); +static void smp_show_cpu_info(int cpu_id); +static void smp_callin(void); +static void smp_online(void); +static void smp_store_cpu_info(int); +static void smp_cpu_init(void); +static void smp_tune_scheduling(void); +static void send_IPI_mask(const cpumask_t *cpumask, int irq); +static void init_ipi(void); + +/* + * IPI Initialization interrupt definitions + */ +static void mn10300_ipi_disable(unsigned int irq); +static void mn10300_ipi_enable(unsigned int irq); +static void mn10300_ipi_ack(unsigned int irq); +static void mn10300_ipi_nop(unsigned int irq); + +static struct irq_chip mn10300_ipi_type = { + .name = "cpu_ipi", + .disable = mn10300_ipi_disable, + .enable = mn10300_ipi_enable, + .ack = mn10300_ipi_ack, + .eoi = mn10300_ipi_nop +}; + +static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id); +static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id); +static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id); + +static struct irqaction reschedule_ipi = { + .handler = smp_reschedule_interrupt, + .name = "smp reschedule IPI" +}; +static struct irqaction call_function_ipi = { + .handler = smp_call_function_interrupt, + .name = "smp call function IPI" +}; +static struct irqaction local_timer_ipi = { + .handler = smp_ipi_timer_interrupt, + .flags = IRQF_DISABLED, + .name = "smp local timer IPI" +}; + +/** + * init_ipi - Initialise the IPI mechanism + */ +static void init_ipi(void) +{ + unsigned long flags; + u16 tmp16; + + /* set up the reschedule IPI */ + set_irq_chip_and_handler(RESCHEDULE_IPI, + &mn10300_ipi_type, handle_percpu_irq); + setup_irq(RESCHEDULE_IPI, &reschedule_ipi); + set_intr_level(RESCHEDULE_IPI, RESCHEDULE_GxICR_LV); + mn10300_ipi_enable(RESCHEDULE_IPI); + + /* set up the call function IPI */ + set_irq_chip_and_handler(CALL_FUNC_SINGLE_IPI, + &mn10300_ipi_type, handle_percpu_irq); + setup_irq(CALL_FUNC_SINGLE_IPI, &call_function_ipi); + set_intr_level(CALL_FUNC_SINGLE_IPI, CALL_FUNCTION_GxICR_LV); + mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI); + + /* set up the local timer IPI */ + set_irq_chip_and_handler(LOCAL_TIMER_IPI, + &mn10300_ipi_type, handle_percpu_irq); + setup_irq(LOCAL_TIMER_IPI, &local_timer_ipi); + set_intr_level(LOCAL_TIMER_IPI, LOCAL_TIMER_GxICR_LV); + mn10300_ipi_enable(LOCAL_TIMER_IPI); + +#ifdef CONFIG_MN10300_CACHE_ENABLED + /* set up the cache flush IPI */ + flags = arch_local_cli_save(); + __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(FLUSH_CACHE_GxICR_LV), + mn10300_low_ipi_handler); + GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(FLUSH_CACHE_IPI); + arch_local_irq_restore(flags); +#endif + + /* set up the NMI call function IPI */ + flags = arch_local_cli_save(); + GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; + tmp16 = GxICR(CALL_FUNCTION_NMI_IPI); + arch_local_irq_restore(flags); + + /* set up the SMP boot IPI */ + flags = arch_local_cli_save(); + __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(SMP_BOOT_GxICR_LV), + mn10300_low_ipi_handler); + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_shutdown - Shut down handling of an IPI + * @irq: The IPI to be shut down. + */ +static void mn10300_ipi_shutdown(unsigned int irq) +{ + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; + tmp = GxICR(irq); + + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_enable - Enable an IPI + * @irq: The IPI to be enabled. + */ +static void mn10300_ipi_enable(unsigned int irq) +{ + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + tmp = GxICR(irq); + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; + tmp = GxICR(irq); + + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_disable - Disable an IPI + * @irq: The IPI to be disabled. + */ +static void mn10300_ipi_disable(unsigned int irq) +{ + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + + tmp = GxICR(irq); + GxICR(irq) = tmp & GxICR_LEVEL; + tmp = GxICR(irq); + + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_ack - Acknowledge an IPI interrupt in the PIC + * @irq: The IPI to be acknowledged. + * + * Clear the interrupt detection flag for the IPI on the appropriate interrupt + * channel in the PIC. + */ +static void mn10300_ipi_ack(unsigned int irq) +{ + unsigned long flags; + u16 tmp; + + flags = arch_local_cli_save(); + GxICR_u8(irq) = GxICR_DETECT; + tmp = GxICR(irq); + arch_local_irq_restore(flags); +} + +/** + * mn10300_ipi_nop - Dummy IPI action + * @irq: The IPI to be acted upon. + */ +static void mn10300_ipi_nop(unsigned int irq) +{ +} + +/** + * send_IPI_mask - Send IPIs to all CPUs in list + * @cpumask: The list of CPUs to target. + * @irq: The IPI request to be sent. + * + * Send the specified IPI to all the CPUs in the list, not waiting for them to + * finish before returning. The caller is responsible for synchronisation if + * that is needed. + */ +static void send_IPI_mask(const cpumask_t *cpumask, int irq) +{ + int i; + u16 tmp; + + for (i = 0; i < NR_CPUS; i++) { + if (cpu_isset(i, *cpumask)) { + /* send IPI */ + tmp = CROSS_GxICR(irq, i); + CROSS_GxICR(irq, i) = + tmp | GxICR_REQUEST | GxICR_DETECT; + tmp = CROSS_GxICR(irq, i); /* flush write buffer */ + } + } +} + +/** + * send_IPI_self - Send an IPI to this CPU. + * @irq: The IPI request to be sent. + * + * Send the specified IPI to the current CPU. + */ +void send_IPI_self(int irq) +{ + send_IPI_mask(cpumask_of(smp_processor_id()), irq); +} + +/** + * send_IPI_allbutself - Send IPIs to all the other CPUs. + * @irq: The IPI request to be sent. + * + * Send the specified IPI to all CPUs in the system barring the current one, + * not waiting for them to finish before returning. The caller is responsible + * for synchronisation if that is needed. + */ +void send_IPI_allbutself(int irq) +{ + cpumask_t cpumask; + + cpumask = cpu_online_map; + cpu_clear(smp_processor_id(), cpumask); + send_IPI_mask(&cpumask, irq); +} + +void arch_send_call_function_ipi_mask(const struct cpumask *mask) +{ + BUG(); + /*send_IPI_mask(mask, CALL_FUNCTION_IPI);*/ +} + +void arch_send_call_function_single_ipi(int cpu) +{ + send_IPI_mask(cpumask_of(cpu), CALL_FUNC_SINGLE_IPI); +} + +/** + * smp_send_reschedule - Send reschedule IPI to a CPU + * @cpu: The CPU to target. + */ +void smp_send_reschedule(int cpu) +{ + send_IPI_mask(cpumask_of(cpu), RESCHEDULE_IPI); +} + +/** + * smp_nmi_call_function - Send a call function NMI IPI to all CPUs + * @func: The function to ask to be run. + * @info: The context data to pass to that function. + * @wait: If true, wait (atomically) until function is run on all CPUs. + * + * Send a non-maskable request to all CPUs in the system, requesting them to + * run the specified function with the given context data, and, potentially, to + * wait for completion of that function on all CPUs. + * + * Returns 0 if successful, -ETIMEDOUT if we were asked to wait, but hit the + * timeout. + */ +int smp_nmi_call_function(smp_call_func_t func, void *info, int wait) +{ + struct nmi_call_data_struct data; + unsigned long flags; + unsigned int cnt; + int cpus, ret = 0; + + cpus = num_online_cpus() - 1; + if (cpus < 1) + return 0; + + data.func = func; + data.info = info; + data.started = cpu_online_map; + cpu_clear(smp_processor_id(), data.started); + data.wait = wait; + if (wait) + data.finished = data.started; + + spin_lock_irqsave(&smp_nmi_call_lock, flags); + nmi_call_data = &data; + smp_mb(); + + /* Send a message to all other CPUs and wait for them to respond */ + send_IPI_allbutself(CALL_FUNCTION_NMI_IPI); + + /* Wait for response */ + if (CALL_FUNCTION_NMI_IPI_TIMEOUT > 0) { + for (cnt = 0; + cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT && + !cpus_empty(data.started); + cnt++) + mdelay(1); + + if (wait && cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT) { + for (cnt = 0; + cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT && + !cpus_empty(data.finished); + cnt++) + mdelay(1); + } + + if (cnt >= CALL_FUNCTION_NMI_IPI_TIMEOUT) + ret = -ETIMEDOUT; + + } else { + /* If timeout value is zero, wait until cpumask has been + * cleared */ + while (!cpus_empty(data.started)) + barrier(); + if (wait) + while (!cpus_empty(data.finished)) + barrier(); + } + + spin_unlock_irqrestore(&smp_nmi_call_lock, flags); + return ret; +} + +/** + * stop_this_cpu - Callback to stop a CPU. + * @unused: Callback context (ignored). + */ +void stop_this_cpu(void *unused) +{ + static volatile int stopflag; + unsigned long flags; + +#ifdef CONFIG_GDBSTUB + /* In case of single stepping smp_send_stop by other CPU, + * clear procindebug to avoid deadlock. + */ + atomic_set(&procindebug[smp_processor_id()], 0); +#endif /* CONFIG_GDBSTUB */ + + flags = arch_local_cli_save(); + cpu_clear(smp_processor_id(), cpu_online_map); + + while (!stopflag) + cpu_relax(); + + cpu_set(smp_processor_id(), cpu_online_map); + arch_local_irq_restore(flags); +} + +/** + * smp_send_stop - Send a stop request to all CPUs. + */ +void smp_send_stop(void) +{ + smp_nmi_call_function(stop_this_cpu, NULL, 0); +} + +/** + * smp_reschedule_interrupt - Reschedule IPI handler + * @irq: The interrupt number. + * @dev_id: The device ID. + * + * We need do nothing here, since the scheduling will be effected on our way + * back through entry.S. + * + * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. + */ +static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id) +{ + /* do nothing */ + return IRQ_HANDLED; +} + +/** + * smp_call_function_interrupt - Call function IPI handler + * @irq: The interrupt number. + * @dev_id: The device ID. + * + * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. + */ +static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id) +{ + /* generic_smp_call_function_interrupt(); */ + generic_smp_call_function_single_interrupt(); + return IRQ_HANDLED; +} + +/** + * smp_nmi_call_function_interrupt - Non-maskable call function IPI handler + */ +void smp_nmi_call_function_interrupt(void) +{ + smp_call_func_t func = nmi_call_data->func; + void *info = nmi_call_data->info; + int wait = nmi_call_data->wait; + + /* Notify the initiating CPU that I've grabbed the data and am about to + * execute the function + */ + smp_mb(); + cpu_clear(smp_processor_id(), nmi_call_data->started); + (*func)(info); + + if (wait) { + smp_mb(); + cpu_clear(smp_processor_id(), nmi_call_data->finished); + } +} + +/** + * smp_ipi_timer_interrupt - Local timer IPI handler + * @irq: The interrupt number. + * @dev_id: The device ID. + * + * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. + */ +static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id) +{ + return local_timer_interrupt(); +} + +void __init smp_init_cpus(void) +{ + int i; + for (i = 0; i < NR_CPUS; i++) { + set_cpu_possible(i, true); + set_cpu_present(i, true); + } +} + +/** + * smp_cpu_init - Initialise AP in start_secondary. + * + * For this Application Processor, set up init_mm, initialise FPU and set + * interrupt level 0-6 setting. + */ +static void __init smp_cpu_init(void) +{ + unsigned long flags; + int cpu_id = smp_processor_id(); + u16 tmp16; + + if (test_and_set_bit(cpu_id, &cpu_initialized)) { + printk(KERN_WARNING "CPU#%d already initialized!\n", cpu_id); + for (;;) + local_irq_enable(); + } + printk(KERN_INFO "Initializing CPU#%d\n", cpu_id); + + atomic_inc(&init_mm.mm_count); + current->active_mm = &init_mm; + BUG_ON(current->mm); + + enter_lazy_tlb(&init_mm, current); + + /* Force FPU initialization */ + clear_using_fpu(current); + + GxICR(CALL_FUNC_SINGLE_IPI) = CALL_FUNCTION_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI); + + GxICR(LOCAL_TIMER_IPI) = LOCAL_TIMER_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(LOCAL_TIMER_IPI); + + GxICR(RESCHEDULE_IPI) = RESCHEDULE_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(RESCHEDULE_IPI); + +#ifdef CONFIG_MN10300_CACHE_ENABLED + GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT; + mn10300_ipi_enable(FLUSH_CACHE_IPI); +#endif + + mn10300_ipi_shutdown(SMP_BOOT_IRQ); + + /* Set up the non-maskable call function IPI */ + flags = arch_local_cli_save(); + GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; + tmp16 = GxICR(CALL_FUNCTION_NMI_IPI); + arch_local_irq_restore(flags); +} + +/** + * smp_prepare_cpu_init - Initialise CPU in startup_secondary + * + * Set interrupt level 0-6 setting and init ICR of gdbstub. + */ +void smp_prepare_cpu_init(void) +{ + int loop; + + /* Set the interrupt vector registers */ + IVAR0 = EXCEP_IRQ_LEVEL0; + IVAR1 = EXCEP_IRQ_LEVEL1; + IVAR2 = EXCEP_IRQ_LEVEL2; + IVAR3 = EXCEP_IRQ_LEVEL3; + IVAR4 = EXCEP_IRQ_LEVEL4; + IVAR5 = EXCEP_IRQ_LEVEL5; + IVAR6 = EXCEP_IRQ_LEVEL6; + + /* Disable all interrupts and set to priority 6 (lowest) */ + for (loop = 0; loop < GxICR_NUM_IRQS; loop++) + GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; + +#ifdef CONFIG_GDBSTUB + /* initialise GDB-stub */ + do { + unsigned long flags; + u16 tmp16; + + flags = arch_local_cli_save(); + GxICR(GDB_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; + tmp16 = GxICR(GDB_NMI_IPI); + arch_local_irq_restore(flags); + } while (0); +#endif +} + +/** + * start_secondary - Activate a secondary CPU (AP) + * @unused: Thread parameter (ignored). + */ +int __init start_secondary(void *unused) +{ + smp_cpu_init(); + + smp_callin(); + while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) + cpu_relax(); + + local_flush_tlb(); + preempt_disable(); + smp_online(); + + cpu_idle(); + return 0; +} + +/** + * smp_prepare_cpus - Boot up secondary CPUs (APs) + * @max_cpus: Maximum number of CPUs to boot. + * + * Call do_boot_cpu, and boot up APs. + */ +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + int phy_id; + + /* Setup boot CPU information */ + smp_store_cpu_info(0); + smp_tune_scheduling(); + + init_ipi(); + + /* If SMP should be disabled, then finish */ + if (max_cpus == 0) { + printk(KERN_INFO "SMP mode deactivated.\n"); + goto smp_done; + } + + /* Boot secondary CPUs (for which phy_id > 0) */ + for (phy_id = 0; phy_id < NR_CPUS; phy_id++) { + /* Don't boot primary CPU */ + if (max_cpus <= cpucount + 1) + continue; + if (phy_id != 0) + do_boot_cpu(phy_id); + set_cpu_possible(phy_id, true); + smp_show_cpu_info(phy_id); + } + +smp_done: + Dprintk("Boot done.\n"); +} + +/** + * smp_store_cpu_info - Save a CPU's information + * @cpu: The CPU to save for. + * + * Save boot_cpu_data and jiffy for the specified CPU. + */ +static void __init smp_store_cpu_info(int cpu) +{ + struct mn10300_cpuinfo *ci = &cpu_data[cpu]; + + *ci = boot_cpu_data; + ci->loops_per_jiffy = loops_per_jiffy; + ci->type = CPUREV; +} + +/** + * smp_tune_scheduling - Set time slice value + * + * Nothing to do here. + */ +static void __init smp_tune_scheduling(void) +{ +} + +/** + * do_boot_cpu: Boot up one CPU + * @phy_id: Physical ID of CPU to boot. + * + * Send an IPI to a secondary CPU to boot it. Returns 0 on success, 1 + * otherwise. + */ +static int __init do_boot_cpu(int phy_id) +{ + struct task_struct *idle; + unsigned long send_status, callin_status; + int timeout, cpu_id; + + send_status = GxICR_REQUEST; + callin_status = 0; + timeout = 0; + cpu_id = phy_id; + + cpucount++; + + /* Create idle thread for this CPU */ + idle = fork_idle(cpu_id); + if (IS_ERR(idle)) + panic("Failed fork for CPU#%d.", cpu_id); + + idle->thread.pc = (unsigned long)start_secondary; + + printk(KERN_NOTICE "Booting CPU#%d\n", cpu_id); + start_stack[cpu_id - 1] = idle->thread.sp; + + task_thread_info(idle)->cpu = cpu_id; + + /* Send boot IPI to AP */ + send_IPI_mask(cpumask_of(phy_id), SMP_BOOT_IRQ); + + Dprintk("Waiting for send to finish...\n"); + + /* Wait for AP's IPI receive in 100[ms] */ + do { + udelay(1000); + send_status = + CROSS_GxICR(SMP_BOOT_IRQ, phy_id) & GxICR_REQUEST; + } while (send_status == GxICR_REQUEST && timeout++ < 100); + + Dprintk("Waiting for cpu_callin_map.\n"); + + if (send_status == 0) { + /* Allow AP to start initializing */ + cpu_set(cpu_id, cpu_callout_map); + + /* Wait for setting cpu_callin_map */ + timeout = 0; + do { + udelay(1000); + callin_status = cpu_isset(cpu_id, cpu_callin_map); + } while (callin_status == 0 && timeout++ < 5000); + + if (callin_status == 0) + Dprintk("Not responding.\n"); + } else { + printk(KERN_WARNING "IPI not delivered.\n"); + } + + if (send_status == GxICR_REQUEST || callin_status == 0) { + cpu_clear(cpu_id, cpu_callout_map); + cpu_clear(cpu_id, cpu_callin_map); + cpu_clear(cpu_id, cpu_initialized); + cpucount--; + return 1; + } + return 0; +} + +/** + * smp_show_cpu_info - Show SMP CPU information + * @cpu: The CPU of interest. + */ +static void __init smp_show_cpu_info(int cpu) +{ + struct mn10300_cpuinfo *ci = &cpu_data[cpu]; + + printk(KERN_INFO + "CPU#%d : ioclk speed: %lu.%02luMHz : bogomips : %lu.%02lu\n", + cpu, + MN10300_IOCLK / 1000000, + (MN10300_IOCLK / 10000) % 100, + ci->loops_per_jiffy / (500000 / HZ), + (ci->loops_per_jiffy / (5000 / HZ)) % 100); +} + +/** + * smp_callin - Set cpu_callin_map of the current CPU ID + */ +static void __init smp_callin(void) +{ + unsigned long timeout; + int cpu; + + cpu = smp_processor_id(); + timeout = jiffies + (2 * HZ); + + if (cpu_isset(cpu, cpu_callin_map)) { + printk(KERN_ERR "CPU#%d already present.\n", cpu); + BUG(); + } + Dprintk("CPU#%d waiting for CALLOUT\n", cpu); + + /* Wait for AP startup 2s total */ + while (time_before(jiffies, timeout)) { + if (cpu_isset(cpu, cpu_callout_map)) + break; + cpu_relax(); + } + + if (!time_before(jiffies, timeout)) { + printk(KERN_ERR + "BUG: CPU#%d started up but did not get a callout!\n", + cpu); + BUG(); + } + +#ifdef CONFIG_CALIBRATE_DELAY + calibrate_delay(); /* Get our bogomips */ +#endif + + /* Save our processor parameters */ + smp_store_cpu_info(cpu); + + /* Allow the boot processor to continue */ + cpu_set(cpu, cpu_callin_map); +} + +/** + * smp_online - Set cpu_online_map + */ +static void __init smp_online(void) +{ + int cpu; + + cpu = smp_processor_id(); + + local_irq_enable(); + + cpu_set(cpu, cpu_online_map); + smp_wmb(); +} + +/** + * smp_cpus_done - + * @max_cpus: Maximum CPU count. + * + * Do nothing. + */ +void __init smp_cpus_done(unsigned int max_cpus) +{ +} + +/* + * smp_prepare_boot_cpu - Set up stuff for the boot processor. + * + * Set up the cpu_online_map, cpu_callout_map and cpu_callin_map of the boot + * processor (CPU 0). + */ +void __devinit smp_prepare_boot_cpu(void) +{ + cpu_set(0, cpu_callout_map); + cpu_set(0, cpu_callin_map); + current_thread_info()->cpu = 0; +} + +/* + * initialize_secondary - Initialise a secondary CPU (Application Processor). + * + * Set SP register and jump to thread's PC address. + */ +void initialize_secondary(void) +{ + asm volatile ( + "mov %0,sp \n" + "jmp (%1) \n" + : + : "a"(current->thread.sp), "a"(current->thread.pc)); +} + +/** + * __cpu_up - Set smp_commenced_mask for the nominated CPU + * @cpu: The target CPU. + */ +int __devinit __cpu_up(unsigned int cpu) +{ + int timeout; + +#ifdef CONFIG_HOTPLUG_CPU + if (num_online_cpus() == 1) + disable_hlt(); + if (sleep_mode[cpu]) + run_wakeup_cpu(cpu); +#endif /* CONFIG_HOTPLUG_CPU */ + + cpu_set(cpu, smp_commenced_mask); + + /* Wait 5s total for a response */ + for (timeout = 0 ; timeout < 5000 ; timeout++) { + if (cpu_isset(cpu, cpu_online_map)) + break; + udelay(1000); + } + + BUG_ON(!cpu_isset(cpu, cpu_online_map)); + return 0; +} + +/** + * setup_profiling_timer - Set up the profiling timer + * @multiplier - The frequency multiplier to use + * + * The frequency of the profiling timer can be changed by writing a multiplier + * value into /proc/profile. + */ +int setup_profiling_timer(unsigned int multiplier) +{ + return -EINVAL; +} + +/* + * CPU hotplug routines + */ +#ifdef CONFIG_HOTPLUG_CPU + +static DEFINE_PER_CPU(struct cpu, cpu_devices); + +static int __init topology_init(void) +{ + int cpu, ret; + + for_each_cpu(cpu) { + ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL); + if (ret) + printk(KERN_WARNING + "topology_init: register_cpu %d failed (%d)\n", + cpu, ret); + } + return 0; +} + +subsys_initcall(topology_init); + +int __cpu_disable(void) +{ + int cpu = smp_processor_id(); + if (cpu == 0) + return -EBUSY; + + migrate_irqs(); + cpu_clear(cpu, current->active_mm->cpu_vm_mask); + return 0; +} + +void __cpu_die(unsigned int cpu) +{ + run_sleep_cpu(cpu); + + if (num_online_cpus() == 1) + enable_hlt(); +} + +#ifdef CONFIG_MN10300_CACHE_ENABLED +static inline void hotplug_cpu_disable_cache(void) +{ + int tmp; + asm volatile( + " movhu (%1),%0 \n" + " and %2,%0 \n" + " movhu %0,(%1) \n" + "1: movhu (%1),%0 \n" + " btst %3,%0 \n" + " bne 1b \n" + : "=&r"(tmp) + : "a"(&CHCTR), + "i"(~(CHCTR_ICEN | CHCTR_DCEN)), + "i"(CHCTR_ICBUSY | CHCTR_DCBUSY) + : "memory", "cc"); +} + +static inline void hotplug_cpu_enable_cache(void) +{ + int tmp; + asm volatile( + "movhu (%1),%0 \n" + "or %2,%0 \n" + "movhu %0,(%1) \n" + : "=&r"(tmp) + : "a"(&CHCTR), + "i"(CHCTR_ICEN | CHCTR_DCEN) + : "memory", "cc"); +} + +static inline void hotplug_cpu_invalidate_cache(void) +{ + int tmp; + asm volatile ( + "movhu (%1),%0 \n" + "or %2,%0 \n" + "movhu %0,(%1) \n" + : "=&r"(tmp) + : "a"(&CHCTR), + "i"(CHCTR_ICINV | CHCTR_DCINV) + : "cc"); +} + +#else /* CONFIG_MN10300_CACHE_ENABLED */ +#define hotplug_cpu_disable_cache() do {} while (0) +#define hotplug_cpu_enable_cache() do {} while (0) +#define hotplug_cpu_invalidate_cache() do {} while (0) +#endif /* CONFIG_MN10300_CACHE_ENABLED */ + +/** + * hotplug_cpu_nmi_call_function - Call a function on other CPUs for hotplug + * @cpumask: List of target CPUs. + * @func: The function to call on those CPUs. + * @info: The context data for the function to be called. + * @wait: Whether to wait for the calls to complete. + * + * Non-maskably call a function on another CPU for hotplug purposes. + * + * This function must be called with maskable interrupts disabled. + */ +static int hotplug_cpu_nmi_call_function(cpumask_t cpumask, + smp_call_func_t func, void *info, + int wait) +{ + /* + * The address and the size of nmi_call_func_mask_data + * need to be aligned on L1_CACHE_BYTES. + */ + static struct nmi_call_data_struct nmi_call_func_mask_data + __cacheline_aligned; + unsigned long start, end; + + start = (unsigned long)&nmi_call_func_mask_data; + end = start + sizeof(struct nmi_call_data_struct); + + nmi_call_func_mask_data.func = func; + nmi_call_func_mask_data.info = info; + nmi_call_func_mask_data.started = cpumask; + nmi_call_func_mask_data.wait = wait; + if (wait) + nmi_call_func_mask_data.finished = cpumask; + + spin_lock(&smp_nmi_call_lock); + nmi_call_data = &nmi_call_func_mask_data; + mn10300_local_dcache_flush_range(start, end); + smp_wmb(); + + send_IPI_mask(cpumask, CALL_FUNCTION_NMI_IPI); + + do { + mn10300_local_dcache_inv_range(start, end); + barrier(); + } while (!cpus_empty(nmi_call_func_mask_data.started)); + + if (wait) { + do { + mn10300_local_dcache_inv_range(start, end); + barrier(); + } while (!cpus_empty(nmi_call_func_mask_data.finished)); + } + + spin_unlock(&smp_nmi_call_lock); + return 0; +} + +static void restart_wakeup_cpu(void) +{ + unsigned int cpu = smp_processor_id(); + + cpu_set(cpu, cpu_callin_map); + local_flush_tlb(); + cpu_set(cpu, cpu_online_map); + smp_wmb(); +} + +static void prepare_sleep_cpu(void *unused) +{ + sleep_mode[smp_processor_id()] = 1; + smp_mb(); + mn10300_local_dcache_flush_inv(); + hotplug_cpu_disable_cache(); + hotplug_cpu_invalidate_cache(); +} + +/* when this function called, IE=0, NMID=0. */ +static void sleep_cpu(void *unused) +{ + unsigned int cpu_id = smp_processor_id(); + /* + * CALL_FUNCTION_NMI_IPI for wakeup_cpu() shall not be requested, + * before this cpu goes in SLEEP mode. + */ + do { + smp_mb(); + __sleep_cpu(); + } while (sleep_mode[cpu_id]); + restart_wakeup_cpu(); +} + +static void run_sleep_cpu(unsigned int cpu) +{ + unsigned long flags; + cpumask_t cpumask = cpumask_of(cpu); + + flags = arch_local_cli_save(); + hotplug_cpu_nmi_call_function(cpumask, prepare_sleep_cpu, NULL, 1); + hotplug_cpu_nmi_call_function(cpumask, sleep_cpu, NULL, 0); + udelay(1); /* delay for the cpu to sleep. */ + arch_local_irq_restore(flags); +} + +static void wakeup_cpu(void) +{ + hotplug_cpu_invalidate_cache(); + hotplug_cpu_enable_cache(); + smp_mb(); + sleep_mode[smp_processor_id()] = 0; +} + +static void run_wakeup_cpu(unsigned int cpu) +{ + unsigned long flags; + + flags = arch_local_cli_save(); +#if NR_CPUS == 2 + mn10300_local_dcache_flush_inv(); +#else + /* + * Before waking up the cpu, + * all online cpus should stop and flush D-Cache for global data. + */ +#error not support NR_CPUS > 2, when CONFIG_HOTPLUG_CPU=y. +#endif + hotplug_cpu_nmi_call_function(cpumask_of(cpu), wakeup_cpu, NULL, 1); + arch_local_irq_restore(flags); +} + +#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/mn10300/kernel/switch_to.S b/arch/mn10300/kernel/switch_to.S index 630aad71b946..b08cb2e3aebd 100644 --- a/arch/mn10300/kernel/switch_to.S +++ b/arch/mn10300/kernel/switch_to.S @@ -15,6 +15,9 @@ #include #include #include +#ifdef CONFIG_SMP +#include +#endif /* CONFIG_SMP */ .text @@ -35,7 +38,14 @@ ENTRY(__switch_to) mov d1,a1 # save prev context +#ifdef CONFIG_SMP + mov (CPUID),a2 + add a2,a2 + add a2,a2 + mov (___frame,a2),d0 +#else /* CONFIG_SMP */ mov (__frame),d0 +#endif /* CONFIG_SMP */ mov d0,(THREAD_FRAME,a0) mov __switch_back,d0 mov d0,(THREAD_PC,a0) @@ -59,7 +69,14 @@ ENTRY(__switch_to) #endif mov (THREAD_FRAME,a1),a2 +#ifdef CONFIG_SMP + mov (CPUID),a0 + add a0,a0 + add a0,a0 + mov a2,(___frame,a0) +#else /* CONFIG_SMP */ mov a2,(__frame) +#endif /* CONFIG_SMP */ mov (THREAD_PC,a1),a2 mov d2,d0 # for ret_from_fork mov d0,a0 # for __switch_to diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c index 0b5c856b4266..0cb9bdb3b6bd 100644 --- a/arch/mn10300/kernel/time.c +++ b/arch/mn10300/kernel/time.c @@ -22,12 +22,7 @@ #include #include #include - -#ifdef CONFIG_MN10300_RTC -unsigned long mn10300_ioclk; /* system I/O clock frequency */ -unsigned long mn10300_iobclk; /* system I/O clock frequency */ -unsigned long mn10300_tsc_per_HZ; /* number of ioclks per jiffy */ -#endif /* CONFIG_MN10300_RTC */ +#include "internal.h" static unsigned long mn10300_last_tsc; /* time-stamp counter at last time * interrupt occurred */ @@ -95,6 +90,19 @@ static void __init mn10300_sched_clock_init(void) __muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK); } +/** + * local_timer_interrupt - Local timer interrupt handler + * + * Handle local timer interrupts for this CPU. They may have been propagated + * to this CPU from the CPU that actually gets them by way of an IPI. + */ +irqreturn_t local_timer_interrupt(void) +{ + profile_tick(CPU_PROFILING); + update_process_times(user_mode(get_irq_regs())); + return IRQ_HANDLED; +} + /* * advance the kernel's time keeping clocks (xtime and jiffies) * - we use Timer 0 & 1 cascaded as a clock to nudge us the next time @@ -103,6 +111,7 @@ static void __init mn10300_sched_clock_init(void) static irqreturn_t timer_interrupt(int irq, void *dev_id) { unsigned tsc, elapse; + irqreturn_t ret; write_seqlock(&xtime_lock); @@ -114,15 +123,16 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) mn10300_last_tsc -= MN10300_TSC_PER_HZ; /* advance the kernel's time tracking system */ - profile_tick(CPU_PROFILING); do_timer(1); } write_sequnlock(&xtime_lock); - update_process_times(user_mode(get_irq_regs())); - - return IRQ_HANDLED; + ret = local_timer_interrupt(); +#ifdef CONFIG_SMP + send_IPI_allbutself(LOCAL_TIMER_IPI); +#endif + return ret; } /* @@ -148,7 +158,7 @@ void __init time_init(void) /* use timer 0 & 1 cascaded to tick at as close to HZ as possible */ setup_irq(TMJCIRQ, &timer_irq); - set_intr_level(TMJCIRQ, TMJCICR_LEVEL); + set_intr_level(TMJCIRQ, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL)); startup_jiffies_counter(); diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index 716a221df2f9..c924a1dd3323 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -45,8 +45,13 @@ #error "INTERRUPT_VECTOR_BASE not aligned to 16MiB boundary!" #endif +#ifdef CONFIG_SMP +struct pt_regs *___frame[NR_CPUS]; /* current frame pointer */ +EXPORT_SYMBOL(___frame); +#else /* CONFIG_SMP */ struct pt_regs *__frame; /* current frame pointer */ EXPORT_SYMBOL(__frame); +#endif /* CONFIG_SMP */ int kstack_depth_to_print = 24; @@ -221,11 +226,14 @@ void show_registers_only(struct pt_regs *regs) printk(KERN_EMERG "threadinfo=%p task=%p)\n", current_thread_info(), current); - if ((unsigned long) current >= 0x90000000UL && - (unsigned long) current < 0x94000000UL) + if ((unsigned long) current >= PAGE_OFFSET && + (unsigned long) current < (unsigned long)high_memory) printk(KERN_EMERG "Process %s (pid: %d)\n", current->comm, current->pid); +#ifdef CONFIG_SMP + printk(KERN_EMERG "CPUID: %08x\n", CPUID); +#endif printk(KERN_EMERG "CPUP: %04hx\n", CPUP); printk(KERN_EMERG "TBR: %08x\n", TBR); printk(KERN_EMERG "DEAR: %08x\n", DEAR); @@ -521,8 +529,12 @@ void __init set_intr_stub(enum exception_code code, void *handler) { unsigned long addr; u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code); + unsigned long flags; addr = (unsigned long) handler - (unsigned long) vector; + + flags = arch_local_cli_save(); + vector[0] = 0xdc; /* JMP handler */ vector[1] = addr; vector[2] = addr >> 8; @@ -532,6 +544,8 @@ void __init set_intr_stub(enum exception_code code, void *handler) vector[6] = 0xcb; vector[7] = 0xcb; + arch_local_irq_restore(flags); + #ifndef CONFIG_MN10300_CACHE_SNOOP mn10300_dcache_flush_inv(); mn10300_icache_inv(); diff --git a/arch/mn10300/lib/delay.c b/arch/mn10300/lib/delay.c index fdf6f710f94e..8e7ceb8ba33d 100644 --- a/arch/mn10300/lib/delay.c +++ b/arch/mn10300/lib/delay.c @@ -38,14 +38,14 @@ EXPORT_SYMBOL(__delay); */ void __udelay(unsigned long usecs) { - signed long ioclk, stop; + unsigned long start, stop, cnt; /* usecs * CLK / 1E6 */ stop = __muldiv64u(usecs, MN10300_TSCCLK, 1000000); - stop = TMTSCBC - stop; + start = TMTSCBC; do { - ioclk = TMTSCBC; - } while (stop < ioclk); + cnt = start - TMTSCBC; + } while (cnt < stop); } EXPORT_SYMBOL(__udelay); diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c index 906e4c8f9ab1..59c3da49d9d9 100644 --- a/arch/mn10300/mm/fault.c +++ b/arch/mn10300/mm/fault.c @@ -39,10 +39,6 @@ void bust_spinlocks(int yes) { if (yes) { oops_in_progress = 1; -#ifdef CONFIG_SMP - /* Many serial drivers do __global_cli() */ - global_irq_lock = 0; -#endif } else { int loglevel_save = console_loglevel; #ifdef CONFIG_VT @@ -334,10 +330,10 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - if ((fault_code & MMUFCR_xFC_ACCESS) != MMUFCR_xFC_ACCESS_USR) - goto no_context; - pagefault_out_of_memory(); - return; + printk(KERN_ALERT "VM: killing process %s\n", tsk->comm); + if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) + do_exit(SIGKILL); + goto no_context; do_sigbus: up_read(&mm->mmap_sem); diff --git a/arch/mn10300/proc-mn103e010/include/proc/clock.h b/arch/mn10300/proc-mn103e010/include/proc/clock.h index aa23e147d620..704a819f1f4b 100644 --- a/arch/mn10300/proc-mn103e010/include/proc/clock.h +++ b/arch/mn10300/proc-mn103e010/include/proc/clock.h @@ -13,6 +13,4 @@ #include -#define MN10300_WDCLK MN10300_IOCLK - #endif /* _ASM_PROC_CLOCK_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h b/arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h new file mode 100644 index 000000000000..f537801a44ba --- /dev/null +++ b/arch/mn10300/proc-mn103e010/include/proc/intctl-regs.h @@ -0,0 +1,29 @@ +#ifndef _ASM_PROC_INTCTL_REGS_H +#define _ASM_PROC_INTCTL_REGS_H + +#ifndef _ASM_INTCTL_REGS_H +# error "please don't include this file directly" +#endif + +/* intr acceptance group reg */ +#define IAGR __SYSREG(0xd4000100, u16) + +/* group number register */ +#define IAGR_GN 0x00fc + +#define __GET_XIRQ_TRIGGER(X, Z) (((Z) >> ((X) * 2)) & 3) + +#define __SET_XIRQ_TRIGGER(X, Y, Z) \ +({ \ + typeof(Z) x = (Z); \ + x &= ~(3 << ((X) * 2)); \ + x |= ((Y) & 3) << ((X) * 2); \ + (Z) = x; \ +}) + +/* external pin intr spec reg */ +#define EXTMD __SYSREG(0xd4000200, u16) +#define GET_XIRQ_TRIGGER(X) __GET_XIRQ_TRIGGER(X, EXTMD) +#define SET_XIRQ_TRIGGER(X, Y) __SET_XIRQ_TRIGGER(X, Y, EXTMD) + +#endif /* _ASM_PROC_INTCTL_REGS_H */ diff --git a/arch/mn10300/proc-mn103e010/proc-init.c b/arch/mn10300/proc-mn103e010/proc-init.c index 0cee7878bee9..27b97980dca4 100644 --- a/arch/mn10300/proc-mn103e010/proc-init.c +++ b/arch/mn10300/proc-mn103e010/proc-init.c @@ -11,6 +11,7 @@ #include #include #include +#include /* * initialise the on-silicon processor peripherals @@ -75,3 +76,37 @@ asmlinkage void __init processor_init(void) calibrate_clock(); } + +/* + * determine the memory size and base from the memory controller regs + */ +void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size) +{ + unsigned long base, size; + + *mem_base = 0; + *mem_size = 0; + + base = SDBASE(0); + if (base & SDBASE_CE) { + size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; + size = ~size + 1; + base &= SDBASE_CBA; + + printk(KERN_INFO "SDRAM[0]: %luMb @%08lx\n", size >> 20, base); + *mem_size += size; + *mem_base = base; + } + + base = SDBASE(1); + if (base & SDBASE_CE) { + size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT; + size = ~size + 1; + base &= SDBASE_CBA; + + printk(KERN_INFO "SDRAM[1]: %luMb @%08lx\n", size >> 20, base); + *mem_size += size; + if (*mem_base == 0) + *mem_base = base; + } +} diff --git a/arch/mn10300/proc-mn2ws0050/Makefile b/arch/mn10300/proc-mn2ws0050/Makefile new file mode 100644 index 000000000000..d4ca13309a85 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the linux kernel. +# + +obj-y := proc-init.o diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/cache.h b/arch/mn10300/proc-mn2ws0050/include/proc/cache.h new file mode 100644 index 000000000000..cafd7b5b55b4 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/cache.h @@ -0,0 +1,48 @@ +/* Cache specification + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Add L1_CACHE_SHIFT_MAX definition. + * 29-Jul-2008 MEI Add define for MN10300_HAS_AREAPURGE_REG. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_PROC_CACHE_H +#define _ASM_PROC_CACHE_H + +/* + * L1 cache + */ +#define L1_CACHE_NWAYS 4 /* number of ways in caches */ +#define L1_CACHE_NENTRIES 128 /* number of entries in each way */ +#define L1_CACHE_BYTES 32 /* bytes per entry */ +#define L1_CACHE_SHIFT 5 /* shift for bytes per entry */ +#define L1_CACHE_WAYDISP 0x1000 /* distance from one way to the next */ + +#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */ +#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */ +#define L1_CACHE_TAG_ENTRY 0x00000fe0 /* cache tag entry address mask */ +#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */ + +/* + * specification of the interval between interrupt checking intervals whilst + * managing the cache with the interrupts disabled + */ +#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4 + +/* + * The size of range at which it becomes more economical to just flush the + * whole cache rather than trying to flush the specified range. + */ +#define MN10300_DCACHE_FLUSH_BORDER \ + +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) +#define MN10300_DCACHE_FLUSH_INV_BORDER \ + +(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES) + +#endif /* _ASM_PROC_CACHE_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/clock.h b/arch/mn10300/proc-mn2ws0050/include/proc/clock.h new file mode 100644 index 000000000000..fe4c0a4a53a2 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/clock.h @@ -0,0 +1,20 @@ +/* clock.h: proc-specific clocks + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 23-Feb-2007 MEI Delete define for watchdog timer. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_PROC_CLOCK_H +#define _ASM_PROC_CLOCK_H + +#include + +#endif /* _ASM_PROC_CLOCK_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h new file mode 100644 index 000000000000..4c4319e241d1 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h @@ -0,0 +1,103 @@ +/* MN2WS0050 on-board DMA controller registers + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#ifndef _ASM_PROC_DMACTL_REGS_H +#define _ASM_PROC_DMACTL_REGS_H + +#include + +#ifdef __KERNEL__ + +/* DMA registers */ +#define DMxCTR(N) __SYSREG(0xd4005000+(N*0x100), u32) /* control reg */ +#define DMxCTR_BG 0x0000001f /* transfer request source */ +#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ +#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ +#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ +#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ +#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ +#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ +#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ +#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ +#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ +#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ +#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ +#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ +#define DMxCTR_BG_RYBY 0x0000000d /* - NAND Flash RY/BY request source */ +#define DMxCTR_BG_RMC 0x0000000e /* - remote controller output */ +#define DMxCTR_BG_XIRQ12 0x00000011 /* - XIRQ12 pin interrupt source */ +#define DMxCTR_BG_XIRQ13 0x00000012 /* - XIRQ13 pin interrupt source */ +#define DMxCTR_BG_TCK 0x00000014 /* - tick timer underflow */ +#define DMxCTR_BG_SC4TX 0x00000019 /* - serial port4 transmission */ +#define DMxCTR_BG_SC4RX 0x0000001a /* - serial port4 reception */ +#define DMxCTR_BG_SC5TX 0x0000001b /* - serial port5 transmission */ +#define DMxCTR_BG_SC5RX 0x0000001c /* - serial port5 reception */ +#define DMxCTR_BG_SC6TX 0x0000001d /* - serial port6 transmission */ +#define DMxCTR_BG_SC6RX 0x0000001e /* - serial port6 reception */ +#define DMxCTR_BG_TMSUFLOW 0x0000001f /* - timestamp timer underflow */ +#define DMxCTR_SAM 0x00000060 /* DMA transfer src addr mode */ +#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ +#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ +#define DMxCTR_DAM 0x00000300 /* DMA transfer dest addr mode */ +#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ +#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ +#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ +#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ +#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ +#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ +#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ +#define DMxCTR_RRE 0x00008000 /* DMA round robin enable */ +#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ +#define DMxCTR_RQM 0x00060000 /* external request input source mode */ +#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ +#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ +#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ +#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ +#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ +#define DMxCTR_PERR 0x40000000 /* DMA transfer parameter error flag */ +#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ + +#define DMxSRC(N) __SYSREG(0xd4005004+(N*0x100), u32) /* control reg */ + +#define DMxDST(N) __SYSREG(0xd4005008+(N*0x100), u32) /* source addr reg */ + +#define DMxSIZ(N) __SYSREG(0xd400500c+(N*0x100), u32) /* dest addr reg */ +#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ + +#define DMxCYC(N) __SYSREG(0xd4005010+(N*0x100), u32) /* intermittent size reg */ +#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ + +#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ +#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ +#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ +#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ + +#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ +#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ +#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ +#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ + +#ifndef __ASSEMBLY__ + +struct mn10300_dmactl_regs { + u32 ctr; + const void *src; + void *dst; + u32 siz; + u32 cyc; +} __attribute__((aligned(0x100))); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PROC_DMACTL_REGS_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h new file mode 100644 index 000000000000..a1e977273d19 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h @@ -0,0 +1,29 @@ +#ifndef _ASM_PROC_INTCTL_REGS_H +#define _ASM_PROC_INTCTL_REGS_H + +#ifndef _ASM_INTCTL_REGS_H +# error "please don't include this file directly" +#endif + +/* intr acceptance group reg */ +#define IAGR __SYSREG(0xd4000100, u16) + +/* group number register */ +#define IAGR_GN 0x003fc + +#define __GET_XIRQ_TRIGGER(X, Z) (((Z) >> ((X) * 2)) & 3) + +#define __SET_XIRQ_TRIGGER(X, Y, Z) \ +({ \ + typeof(Z) x = (Z); \ + x &= ~(3 << ((X) * 2)); \ + x |= ((Y) & 3) << ((X) * 2); \ + (Z) = x; \ +}) + +/* external pin intr spec reg */ +#define EXTMD0 __SYSREG(0xd4000200, u32) +#define GET_XIRQ_TRIGGER(X) __GET_XIRQ_TRIGGER(X, EXTMD0) +#define SET_XIRQ_TRIGGER(X, Y) __SET_XIRQ_TRIGGER(X, Y, EXTMD0) + +#endif /* _ASM_PROC_INTCTL_REGS_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/irq.h b/arch/mn10300/proc-mn2ws0050/include/proc/irq.h new file mode 100644 index 000000000000..37777a85ab6f --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/irq.h @@ -0,0 +1,49 @@ +/* MN2WS0050 on-board interrupt controller registers + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Define extended IRQ number for SMP support. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _PROC_IRQ_H +#define _PROC_IRQ_H + +#ifdef __KERNEL__ + +#define GxICR_NUM_IRQS 163 +#ifdef CONFIG_SMP +#define GxICR_NUM_EXT_IRQS 197 +#endif /* CONFIG_SMP */ + +#define GxICR_NUM_XIRQS 16 + +#define XIRQ0 34 +#define XIRQ1 35 +#define XIRQ2 36 +#define XIRQ3 37 +#define XIRQ4 38 +#define XIRQ5 39 +#define XIRQ6 40 +#define XIRQ7 41 +#define XIRQ8 42 +#define XIRQ9 43 +#define XIRQ10 44 +#define XIRQ11 45 +#define XIRQ12 46 +#define XIRQ13 47 +#define XIRQ14 48 +#define XIRQ15 49 + +#define XIRQ2IRQ(num) (XIRQ0 + num) + +#endif /* __KERNEL__ */ + +#endif /* _PROC_IRQ_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h new file mode 100644 index 000000000000..84448f3828b3 --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h @@ -0,0 +1,120 @@ +/* NAND flash interface register definitions + * + * Copyright (C) 2008-2009 Panasonic Corporation + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _PROC_NAND_REGS_H_ +#define _PROC_NAND_REGS_H_ + +/* command register */ +#define FCOMMAND_0 __SYSREG(0xd8f00000, u8) /* fcommand[24:31] */ +#define FCOMMAND_1 __SYSREG(0xd8f00001, u8) /* fcommand[16:23] */ +#define FCOMMAND_2 __SYSREG(0xd8f00002, u8) /* fcommand[8:15] */ +#define FCOMMAND_3 __SYSREG(0xd8f00003, u8) /* fcommand[0:7] */ + +/* for dma 16 byte trans, use FCOMMAND2 register */ +#define FCOMMAND2_0 __SYSREG(0xd8f00110, u8) /* fcommand2[24:31] */ +#define FCOMMAND2_1 __SYSREG(0xd8f00111, u8) /* fcommand2[16:23] */ +#define FCOMMAND2_2 __SYSREG(0xd8f00112, u8) /* fcommand2[8:15] */ +#define FCOMMAND2_3 __SYSREG(0xd8f00113, u8) /* fcommand2[0:7] */ + +#define FCOMMAND_FIEN 0x80 /* nand flash I/F enable */ +#define FCOMMAND_BW_8BIT 0x00 /* 8bit bus width */ +#define FCOMMAND_BW_16BIT 0x40 /* 16bit bus width */ +#define FCOMMAND_BLOCKSZ_SMALL 0x00 /* small block */ +#define FCOMMAND_BLOCKSZ_LARGE 0x20 /* large block */ +#define FCOMMAND_DMASTART 0x10 /* dma start */ +#define FCOMMAND_RYBY 0x08 /* ready/busy flag */ +#define FCOMMAND_RYBYINTMSK 0x04 /* mask ready/busy interrupt */ +#define FCOMMAND_XFWP 0x02 /* write protect enable */ +#define FCOMMAND_XFCE 0x01 /* flash device disable */ +#define FCOMMAND_SEQKILL 0x10 /* stop seq-read */ +#define FCOMMAND_ANUM 0x07 /* address cycle */ +#define FCOMMAND_ANUM_NONE 0x00 /* address cycle none */ +#define FCOMMAND_ANUM_1CYC 0x01 /* address cycle 1cycle */ +#define FCOMMAND_ANUM_2CYC 0x02 /* address cycle 2cycle */ +#define FCOMMAND_ANUM_3CYC 0x03 /* address cycle 3cycle */ +#define FCOMMAND_ANUM_4CYC 0x04 /* address cycle 4cycle */ +#define FCOMMAND_ANUM_5CYC 0x05 /* address cycle 5cycle */ +#define FCOMMAND_FCMD_READ0 0x00 /* read1 command */ +#define FCOMMAND_FCMD_SEQIN 0x80 /* page program 1st command */ +#define FCOMMAND_FCMD_PAGEPROG 0x10 /* page program 2nd command */ +#define FCOMMAND_FCMD_RESET 0xff /* reset command */ +#define FCOMMAND_FCMD_ERASE1 0x60 /* erase 1st command */ +#define FCOMMAND_FCMD_ERASE2 0xd0 /* erase 2nd command */ +#define FCOMMAND_FCMD_STATUS 0x70 /* read status command */ +#define FCOMMAND_FCMD_READID 0x90 /* read id command */ +#define FCOMMAND_FCMD_READOOB 0x50 /* read3 command */ +/* address register */ +#define FADD __SYSREG(0xd8f00004, u32) +/* address register 2 */ +#define FADD2 __SYSREG(0xd8f00008, u32) +/* error judgement register */ +#define FJUDGE __SYSREG(0xd8f0000c, u32) +#define FJUDGE_NOERR 0x0 /* no error */ +#define FJUDGE_1BITERR 0x1 /* 1bit error in data area */ +#define FJUDGE_PARITYERR 0x2 /* parity error */ +#define FJUDGE_UNCORRECTABLE 0x3 /* uncorrectable error */ +#define FJUDGE_ERRJDG_MSK 0x3 /* mask of judgement result */ +/* 1st ECC store register */ +#define FECC11 __SYSREG(0xd8f00010, u32) +/* 2nd ECC store register */ +#define FECC12 __SYSREG(0xd8f00014, u32) +/* 3rd ECC store register */ +#define FECC21 __SYSREG(0xd8f00018, u32) +/* 4th ECC store register */ +#define FECC22 __SYSREG(0xd8f0001c, u32) +/* 5th ECC store register */ +#define FECC31 __SYSREG(0xd8f00020, u32) +/* 6th ECC store register */ +#define FECC32 __SYSREG(0xd8f00024, u32) +/* 7th ECC store register */ +#define FECC41 __SYSREG(0xd8f00028, u32) +/* 8th ECC store register */ +#define FECC42 __SYSREG(0xd8f0002c, u32) +/* data register */ +#define FDATA __SYSREG(0xd8f00030, u32) +/* access pulse register */ +#define FPWS __SYSREG(0xd8f00100, u32) +#define FPWS_PWS1W_2CLK 0x00000000 /* write pulse width 1clock */ +#define FPWS_PWS1W_3CLK 0x01000000 /* write pulse width 2clock */ +#define FPWS_PWS1W_4CLK 0x02000000 /* write pulse width 4clock */ +#define FPWS_PWS1W_5CLK 0x03000000 /* write pulse width 5clock */ +#define FPWS_PWS1W_6CLK 0x04000000 /* write pulse width 6clock */ +#define FPWS_PWS1W_7CLK 0x05000000 /* write pulse width 7clock */ +#define FPWS_PWS1W_8CLK 0x06000000 /* write pulse width 8clock */ +#define FPWS_PWS1R_3CLK 0x00010000 /* read pulse width 3clock */ +#define FPWS_PWS1R_4CLK 0x00020000 /* read pulse width 4clock */ +#define FPWS_PWS1R_5CLK 0x00030000 /* read pulse width 5clock */ +#define FPWS_PWS1R_6CLK 0x00040000 /* read pulse width 6clock */ +#define FPWS_PWS1R_7CLK 0x00050000 /* read pulse width 7clock */ +#define FPWS_PWS1R_8CLK 0x00060000 /* read pulse width 8clock */ +#define FPWS_PWS2W_2CLK 0x00000100 /* write pulse interval 2clock */ +#define FPWS_PWS2W_3CLK 0x00000200 /* write pulse interval 3clock */ +#define FPWS_PWS2W_4CLK 0x00000300 /* write pulse interval 4clock */ +#define FPWS_PWS2W_5CLK 0x00000400 /* write pulse interval 5clock */ +#define FPWS_PWS2W_6CLK 0x00000500 /* write pulse interval 6clock */ +#define FPWS_PWS2R_2CLK 0x00000001 /* read pulse interval 2clock */ +#define FPWS_PWS2R_3CLK 0x00000002 /* read pulse interval 3clock */ +#define FPWS_PWS2R_4CLK 0x00000003 /* read pulse interval 4clock */ +#define FPWS_PWS2R_5CLK 0x00000004 /* read pulse interval 5clock */ +#define FPWS_PWS2R_6CLK 0x00000005 /* read pulse interval 6clock */ +/* command register 2 */ +#define FCOMMAND2 __SYSREG(0xd8f00110, u32) +/* transfer frequency register */ +#define FNUM __SYSREG(0xd8f00114, u32) +#define FSDATA_ADDR 0xd8f00400 +/* active data register */ +#define FSDATA __SYSREG(FSDATA_ADDR, u32) + +#endif /* _PROC_NAND_REGS_H_ */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/proc.h b/arch/mn10300/proc-mn2ws0050/include/proc/proc.h new file mode 100644 index 000000000000..90d5cadd05bd --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/proc.h @@ -0,0 +1,18 @@ +/* proc.h: MN2WS0050 processor description + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_PROC_H +#define _ASM_PROC_PROC_H + +#define PROCESSOR_VENDOR_NAME "Panasonic" +#define PROCESSOR_MODEL_NAME "mn2ws0050" + +#endif /* _ASM_PROC_PROC_H */ diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h new file mode 100644 index 000000000000..22f277fbb4de --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h @@ -0,0 +1,51 @@ +/* MN10300/AM33v2 Microcontroller SMP registers + * + * Copyright (C) 2006 Matsushita Electric Industrial Co., Ltd. + * All Rights Reserved. + * Created: + * 13-Nov-2006 MEI Add extended cache and atomic operation register + * for SMP support. + * 23-Feb-2007 MEI Add define for gdbstub SMP. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_SMP_REGS_H +#define _ASM_PROC_SMP_REGS_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#include +#endif +#include + +/* + * Reference to the interrupt controllers of other CPUs + */ +#define CROSS_ICR_CPU_SHIFT 16 + +#define CROSS_GxICR(X, CPU) __SYSREG(0xc4000000 + (X) * 4 + \ + ((X) >= 64 && (X) < 192) * 0xf00 + ((CPU) << CROSS_ICR_CPU_SHIFT), u16) +#define CROSS_GxICR_u8(X, CPU) __SYSREG(0xc4000000 + (X) * 4 + \ + (((X) >= 64) && ((X) < 192)) * 0xf00 + ((CPU) << CROSS_ICR_CPU_SHIFT), u8) + +/* CPU ID register */ +#define CPUID __SYSREGC(0xc0000054, u32) +#define CPUID_MASK 0x00000007 /* CPU ID mask */ + +/* extended cache control register */ +#define ECHCTR __SYSREG(0xc0000c20, u32) +#define ECHCTR_IBCM 0x00000001 /* instruction cache broad cast mask */ +#define ECHCTR_DBCM 0x00000002 /* data cache broad cast mask */ +#define ECHCTR_ISPM 0x00000004 /* instruction cache snoop mask */ +#define ECHCTR_DSPM 0x00000008 /* data cache snoop mask */ + +#define NMIAGR __SYSREG(0xd400013c, u16) +#define NMIAGR_GN 0x03fc + +#endif /* __KERNEL__ */ +#endif /* _ASM_PROC_SMP_REGS_H */ diff --git a/arch/mn10300/proc-mn2ws0050/proc-init.c b/arch/mn10300/proc-mn2ws0050/proc-init.c new file mode 100644 index 000000000000..c58249b9525a --- /dev/null +++ b/arch/mn10300/proc-mn2ws0050/proc-init.c @@ -0,0 +1,134 @@ +/* MN2WS0050 processor initialisation + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MEMCONF __SYSREGC(0xdf800400, u32) + +/* + * initialise the on-silicon processor peripherals + */ +asmlinkage void __init processor_init(void) +{ + int loop; + + /* set up the exception table first */ + for (loop = 0x000; loop < 0x400; loop += 8) + __set_intr_stub(loop, __common_exception); + + __set_intr_stub(EXCEP_ITLBMISS, itlb_miss); + __set_intr_stub(EXCEP_DTLBMISS, dtlb_miss); + __set_intr_stub(EXCEP_IAERROR, itlb_aerror); + __set_intr_stub(EXCEP_DAERROR, dtlb_aerror); + __set_intr_stub(EXCEP_BUSERROR, raw_bus_error); + __set_intr_stub(EXCEP_DOUBLE_FAULT, double_fault); + __set_intr_stub(EXCEP_FPU_DISABLED, fpu_disabled); + __set_intr_stub(EXCEP_SYSCALL0, system_call); + + __set_intr_stub(EXCEP_NMI, nmi_handler); + __set_intr_stub(EXCEP_WDT, nmi_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL0, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL1, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL2, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL3, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL4, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL5, irq_handler); + __set_intr_stub(EXCEP_IRQ_LEVEL6, irq_handler); + + IVAR0 = EXCEP_IRQ_LEVEL0; + IVAR1 = EXCEP_IRQ_LEVEL1; + IVAR2 = EXCEP_IRQ_LEVEL2; + IVAR3 = EXCEP_IRQ_LEVEL3; + IVAR4 = EXCEP_IRQ_LEVEL4; + IVAR5 = EXCEP_IRQ_LEVEL5; + IVAR6 = EXCEP_IRQ_LEVEL6; + +#ifndef CONFIG_MN10300_HAS_CACHE_SNOOP + mn10300_dcache_flush_inv(); + mn10300_icache_inv(); +#endif + + /* disable all interrupts and set to priority 6 (lowest) */ +#ifdef CONFIG_SMP + for (loop = 0; loop < GxICR_NUM_IRQS; loop++) + GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; +#else /* !CONFIG_SMP */ + for (loop = 0; loop < NR_IRQS; loop++) + GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; +#endif /* !CONFIG_SMP */ + + /* clear the timers */ + TM0MD = 0; + TM1MD = 0; + TM2MD = 0; + TM3MD = 0; + TM4MD = 0; + TM5MD = 0; + TM6MD = 0; + TM6MDA = 0; + TM6MDB = 0; + TM7MD = 0; + TM8MD = 0; + TM9MD = 0; + TM10MD = 0; + TM11MD = 0; + TM12MD = 0; + TM13MD = 0; + TM14MD = 0; + TM15MD = 0; + + calibrate_clock(); +} + +/* + * determine the memory size and base from the memory controller regs + */ +void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size) +{ + unsigned long memconf = MEMCONF; + unsigned long size = 0; /* order: MByte */ + + *mem_base = 0x90000000; /* fixed address */ + + switch (memconf & 0x00000003) { + case 0x01: + size = 256 / 8; /* 256 Mbit per chip */ + break; + case 0x02: + size = 512 / 8; /* 512 Mbit per chip */ + break; + case 0x03: + size = 1024 / 8; /* 1 Gbit per chip */ + break; + default: + panic("Invalid SDRAM size"); + break; + } + + printk(KERN_INFO "DDR2-SDRAM: %luMB x 2 @%08lx\n", size, *mem_base); + + *mem_size = (size * 2) << 20; +} diff --git a/arch/mn10300/unit-asb2303/include/unit/clock.h b/arch/mn10300/unit-asb2303/include/unit/clock.h index 2a0bf79ab968..0316907a012e 100644 --- a/arch/mn10300/unit-asb2303/include/unit/clock.h +++ b/arch/mn10300/unit-asb2303/include/unit/clock.h @@ -14,32 +14,11 @@ #ifndef __ASSEMBLY__ -#ifdef CONFIG_MN10300_RTC - -extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ -extern unsigned long mn10300_iobclk; -extern unsigned long mn10300_tsc_per_HZ; - -#define MN10300_IOCLK mn10300_ioclk -/* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK mn10300_iobclk */ - -#else /* !CONFIG_MN10300_RTC */ - #define MN10300_IOCLK 33333333UL /* #define MN10300_IOBCLK 66666666UL */ -#endif /* !CONFIG_MN10300_RTC */ - -#define MN10300_JCCLK MN10300_IOCLK -#define MN10300_TSCCLK MN10300_IOCLK - -#ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ -#else /* !CONFIG_MN10300_RTC */ -#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) -#endif /* !CONFIG_MN10300_RTC */ - #endif /* !__ASSEMBLY__ */ +#define MN10300_WDCLK MN10300_IOCLK + #endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/serial.h b/arch/mn10300/unit-asb2303/include/unit/serial.h index 047566cd2e36..991e356bac5f 100644 --- a/arch/mn10300/unit-asb2303/include/unit/serial.h +++ b/arch/mn10300/unit-asb2303/include/unit/serial.h @@ -21,6 +21,11 @@ #define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ +/* + * The ASB2303 has an 18.432 MHz clock the UART + */ +#define BASE_BAUD (18432000 / 16) + /* * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports */ diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h index 88cd96bb2527..d1b8dafe7d7d 100644 --- a/arch/mn10300/unit-asb2303/include/unit/timex.h +++ b/arch/mn10300/unit-asb2303/include/unit/timex.h @@ -1,4 +1,4 @@ -/* ASB2303-specific timer specifcations +/* ASB2303-specific timer specifications * * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) @@ -17,6 +17,7 @@ #include #include +#include /* * jiffies counter specifications @@ -29,32 +30,43 @@ #define TMJCBR TM01BR #define TMJCIRQ TM1IRQ #define TMJCICR TM1ICR -#define TMJCICR_LEVEL GxICR_LEVEL_5 #ifndef __ASSEMBLY__ +#define MN10300_SRC_IOCLK MN10300_IOCLK + +#ifndef HZ +# error HZ undeclared. +#endif /* !HZ */ +/* use as little prescaling as possible to avoid losing accuracy */ +#if (MN10300_SRC_IOCLK + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 1 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK +#elif (MN10300_SRC_IOCLK / 8 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 8 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_8 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_8 +#elif (MN10300_SRC_IOCLK / 32 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 32 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_32 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_32 +#else +# error You lose. +#endif + +#define MN10300_JCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) +#define MN10300_TSCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) + +#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) +#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) + static inline void startup_jiffies_counter(void) { - unsigned rate; u16 md, t16; - /* use as little prescaling as possible to avoid losing accuracy */ - md = TM0MD_SRC_IOCLK; - rate = MN10300_JCCLK / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_8; - rate = MN10300_JCCLK / 8 / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_32; - rate = MN10300_JCCLK / 32 / HZ; - - BUG_ON(rate > TMJCBR_MAX); - } - } - - TMJCBR = rate - 1; + md = JC_TIMER_CLKSRC; + TMJCBR = MN10300_JC_PER_HZ - 1; t16 = TMJCBR; TMJCMD = @@ -93,29 +105,39 @@ static inline void shutdown_jiffies_counter(void) static inline void startup_timestamp_counter(void) { + u32 t32; + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time * - count down from 4Gig-1 to 0 and wrap at IOCLK rate */ TM45BR = TMTSCBR_MAX; + t32 = TM45BR; - TM4MD = TM4MD_SRC_IOCLK; + TM4MD = TSC_TIMER_CLKSRC; TM4MD |= TM4MD_INIT_COUNTER; TM4MD &= ~TM4MD_INIT_COUNTER; TM4ICR = 0; + t32 = TM4ICR; TM5MD = TM5MD_SRC_TM4CASCADE; TM5MD |= TM5MD_INIT_COUNTER; TM5MD &= ~TM5MD_INIT_COUNTER; TM5ICR = 0; + t32 = TM5ICR; TM5MD |= TM5MD_COUNT_ENABLE; TM4MD |= TM4MD_COUNT_ENABLE; + t32 = TM5MD; + t32 = TM4MD; } static inline void shutdown_timestamp_counter(void) { + u8 t8; TM4MD = 0; TM5MD = 0; + t8 = TM4MD; + t8 = TM5MD; } /* diff --git a/arch/mn10300/unit-asb2303/unit-init.c b/arch/mn10300/unit-asb2303/unit-init.c index 70e8cb4ea266..834a76aa551a 100644 --- a/arch/mn10300/unit-asb2303/unit-init.c +++ b/arch/mn10300/unit-asb2303/unit-init.c @@ -31,6 +31,14 @@ asmlinkage void __init unit_init(void) SET_XIRQ_TRIGGER(3, XIRQ_TRIGGER_HILEVEL); SET_XIRQ_TRIGGER(4, XIRQ_TRIGGER_LOWLEVEL); SET_XIRQ_TRIGGER(5, XIRQ_TRIGGER_LOWLEVEL); + +#ifdef CONFIG_EXT_SERIAL_IRQ_LEVEL + set_intr_level(XIRQ0, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); +#endif + +#ifdef CONFIG_ETHERNET_IRQ_LEVEL + set_intr_level(XIRQ3, NUM2GxICR_LEVEL(CONFIG_ETHERNET_IRQ_LEVEL)); +#endif } /* @@ -51,7 +59,7 @@ void __init unit_init_IRQ(void) switch (GET_XIRQ_TRIGGER(extnum)) { case XIRQ_TRIGGER_HILEVEL: case XIRQ_TRIGGER_LOWLEVEL: - set_intr_postackable(XIRQ2IRQ(extnum)); + mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); break; default: break; diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h index 67be3f2eb18e..29e3425431cf 100644 --- a/arch/mn10300/unit-asb2305/include/unit/clock.h +++ b/arch/mn10300/unit-asb2305/include/unit/clock.h @@ -14,32 +14,11 @@ #ifndef __ASSEMBLY__ -#ifdef CONFIG_MN10300_RTC - -extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ -extern unsigned long mn10300_iobclk; -extern unsigned long mn10300_tsc_per_HZ; - -#define MN10300_IOCLK mn10300_ioclk -/* If this processors has a another clock, uncomment the below. */ -/* #define MN10300_IOBCLK mn10300_iobclk */ - -#else /* !CONFIG_MN10300_RTC */ - #define MN10300_IOCLK 33333333UL /* #define MN10300_IOBCLK 66666666UL */ -#endif /* !CONFIG_MN10300_RTC */ - -#define MN10300_JCCLK MN10300_IOCLK -#define MN10300_TSCCLK MN10300_IOCLK - -#ifdef CONFIG_MN10300_RTC -#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ -#else /* !CONFIG_MN10300_RTC */ -#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) -#endif /* !CONFIG_MN10300_RTC */ - #endif /* !__ASSEMBLY__ */ +#define MN10300_WDCLK MN10300_IOCLK + #endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h index 8086cc092cec..88c08219315f 100644 --- a/arch/mn10300/unit-asb2305/include/unit/serial.h +++ b/arch/mn10300/unit-asb2305/include/unit/serial.h @@ -20,6 +20,11 @@ #define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ +/* + * The ASB2305 has an 18.432 MHz clock the UART + */ +#define BASE_BAUD (18432000 / 16) + /* * dispose of the /dev/ttyS0 serial port */ diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h index 0860186eedb2..cd8bc14e3ca3 100644 --- a/arch/mn10300/unit-asb2305/include/unit/timex.h +++ b/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -1,4 +1,4 @@ -/* ASB2305 timer specifcations +/* ASB2305-specific timer specifications * * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) @@ -17,6 +17,7 @@ #include #include +#include /* * jiffies counter specifications @@ -29,32 +30,43 @@ #define TMJCBR TM01BR #define TMJCIRQ TM1IRQ #define TMJCICR TM1ICR -#define TMJCICR_LEVEL GxICR_LEVEL_5 #ifndef __ASSEMBLY__ +#define MN10300_SRC_IOCLK MN10300_IOCLK + +#ifndef HZ +# error HZ undeclared. +#endif /* !HZ */ +/* use as little prescaling as possible to avoid losing accuracy */ +#if (MN10300_SRC_IOCLK + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 1 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK +#elif (MN10300_SRC_IOCLK / 8 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 8 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_8 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_8 +#elif (MN10300_SRC_IOCLK / 32 + HZ / 2) / HZ - 1 <= TMJCBR_MAX +# define IOCLK_PRESCALE 32 +# define JC_TIMER_CLKSRC TM0MD_SRC_IOCLK_32 +# define TSC_TIMER_CLKSRC TM4MD_SRC_IOCLK_32 +#else +# error You lose. +#endif + +#define MN10300_JCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) +#define MN10300_TSCCLK (MN10300_SRC_IOCLK / IOCLK_PRESCALE) + +#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) +#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) + static inline void startup_jiffies_counter(void) { - unsigned rate; u16 md, t16; - /* use as little prescaling as possible to avoid losing accuracy */ - md = TM0MD_SRC_IOCLK; - rate = MN10300_JCCLK / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_8; - rate = MN10300_JCCLK / 8 / HZ; - - if (rate > TMJCBR_MAX) { - md = TM0MD_SRC_IOCLK_32; - rate = MN10300_JCCLK / 32 / HZ; - - BUG_ON(rate > TMJCBR_MAX); - } - } - - TMJCBR = rate - 1; + md = JC_TIMER_CLKSRC; + TMJCBR = MN10300_JC_PER_HZ - 1; t16 = TMJCBR; TMJCMD = @@ -93,29 +105,39 @@ static inline void shutdown_jiffies_counter(void) static inline void startup_timestamp_counter(void) { + u32 t32; + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time * - count down from 4Gig-1 to 0 and wrap at IOCLK rate */ TM45BR = TMTSCBR_MAX; + t32 = TM45BR; - TM4MD = TM4MD_SRC_IOCLK; + TM4MD = TSC_TIMER_CLKSRC; TM4MD |= TM4MD_INIT_COUNTER; TM4MD &= ~TM4MD_INIT_COUNTER; TM4ICR = 0; + t32 = TM4ICR; TM5MD = TM5MD_SRC_TM4CASCADE; TM5MD |= TM5MD_INIT_COUNTER; TM5MD &= ~TM5MD_INIT_COUNTER; TM5ICR = 0; + t32 = TM5ICR; TM5MD |= TM5MD_COUNT_ENABLE; TM4MD |= TM4MD_COUNT_ENABLE; + t32 = TM5MD; + t32 = TM4MD; } static inline void shutdown_timestamp_counter(void) { + u8 t8; TM4MD = 0; TM5MD = 0; + t8 = TM4MD; + t8 = TM5MD; } /* @@ -126,7 +148,7 @@ typedef unsigned long cycles_t; static inline cycles_t read_timestamp_counter(void) { - return (cycles_t) TMTSCBC; + return (cycles_t)TMTSCBC; } #endif /* !__ASSEMBLY__ */ diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 6d8720a0a599..a4954fe82094 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -503,7 +503,7 @@ asmlinkage void __init unit_pci_init(void) struct pci_ops *o = &pci_direct_ampci; u32 x; - set_intr_level(XIRQ1, GxICR_LEVEL_3); + set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_PCI_IRQ_LEVEL)); memset(&bus, 0, sizeof(bus)); diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index a76c8e0ab90f..e1becd6b7571 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -26,8 +26,10 @@ asmlinkage void __init unit_init(void) { #ifndef CONFIG_GDBSTUB_ON_TTYSx /* set the 16550 interrupt line to level 3 if not being used for GDB */ - set_intr_level(XIRQ0, GxICR_LEVEL_3); +#ifdef CONFIG_EXT_SERIAL_IRQ_LEVEL + set_intr_level(XIRQ0, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); #endif +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ } /* @@ -51,7 +53,7 @@ void __init unit_init_IRQ(void) switch (GET_XIRQ_TRIGGER(extnum)) { case XIRQ_TRIGGER_HILEVEL: case XIRQ_TRIGGER_LOWLEVEL: - set_intr_postackable(XIRQ2IRQ(extnum)); + mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); break; default: break; diff --git a/arch/mn10300/unit-asb2364/Makefile b/arch/mn10300/unit-asb2364/Makefile new file mode 100644 index 000000000000..6dd27d65877a --- /dev/null +++ b/arch/mn10300/unit-asb2364/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the linux kernel. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# +# Note 2! The CFLAGS definitions are now in the main makefile... + +obj-y := unit-init.o leds.o diff --git a/arch/mn10300/unit-asb2364/include/unit/clock.h b/arch/mn10300/unit-asb2364/include/unit/clock.h new file mode 100644 index 000000000000..d34ac9a7508b --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/clock.h @@ -0,0 +1,29 @@ +/* clock.h: unit-specific clocks + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 23-Feb-2007 MEI Add define for watchdog timer. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_CLOCK_H +#define _ASM_UNIT_CLOCK_H + +#ifndef __ASSEMBLY__ + +#define MN10300_IOCLK 100000000UL /* for DDR800 */ +/*#define MN10300_IOCLK 83333333UL */ /* for DDR667 */ +#define MN10300_IOBCLK MN10300_IOCLK /* IOBCLK is equal to IOCLK */ + +#endif /* !__ASSEMBLY__ */ + +#define MN10300_WDCLK 27000000UL + +#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h b/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h new file mode 100644 index 000000000000..a039a50c91db --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h @@ -0,0 +1,50 @@ +/* ASB2364 FPGA registers + */ + +#ifndef _ASM_UNIT_FPGA_REGS_H +#define _ASM_UNIT_FPGA_REGS_H + +#include + +#ifdef __KERNEL__ + +#define ASB2364_FPGA_REG_RESET_LAN __SYSREG(0xa9001300, u16) +#define ASB2364_FPGA_REG_RESET_UART __SYSREG(0xa9001304, u16) +#define ASB2364_FPGA_REG_RESET_I2C __SYSREG(0xa9001308, u16) +#define ASB2364_FPGA_REG_RESET_USB __SYSREG(0xa900130c, u16) +#define ASB2364_FPGA_REG_RESET_AV __SYSREG(0xa9001310, u16) + +#define ASB2364_FPGA_REG_IRQ_LAN __SYSREG(0xa9001510, u16) +#define ASB2364_FPGA_REG_IRQ_UART __SYSREG(0xa9001514, u16) +#define ASB2364_FPGA_REG_IRQ_I2C __SYSREG(0xa9001518, u16) +#define ASB2364_FPGA_REG_IRQ_USB __SYSREG(0xa900151c, u16) +#define ASB2364_FPGA_REG_IRQ_FPGA __SYSREG(0xa9001524, u16) + +#define ASB2364_FPGA_REG_MASK_LAN __SYSREG(0xa9001590, u16) +#define ASB2364_FPGA_REG_MASK_UART __SYSREG(0xa9001594, u16) +#define ASB2364_FPGA_REG_MASK_I2C __SYSREG(0xa9001598, u16) +#define ASB2364_FPGA_REG_MASK_USB __SYSREG(0xa900159c, u16) +#define ASB2364_FPGA_REG_MASK_FPGA __SYSREG(0xa90015a4, u16) + +#define ASB2364_FPGA_REG_CPLD5_SET1 __SYSREG(0xa9002500, u16) +#define ASB2364_FPGA_REG_CPLD5_SET2 __SYSREG(0xa9002504, u16) +#define ASB2364_FPGA_REG_CPLD6_SET1 __SYSREG(0xa9002600, u16) +#define ASB2364_FPGA_REG_CPLD6_SET2 __SYSREG(0xa9002604, u16) +#define ASB2364_FPGA_REG_CPLD7_SET1 __SYSREG(0xa9002700, u16) +#define ASB2364_FPGA_REG_CPLD7_SET2 __SYSREG(0xa9002704, u16) +#define ASB2364_FPGA_REG_CPLD8_SET1 __SYSREG(0xa9002800, u16) +#define ASB2364_FPGA_REG_CPLD8_SET2 __SYSREG(0xa9002804, u16) +#define ASB2364_FPGA_REG_CPLD9_SET1 __SYSREG(0xa9002900, u16) +#define ASB2364_FPGA_REG_CPLD9_SET2 __SYSREG(0xa9002904, u16) +#define ASB2364_FPGA_REG_CPLD10_SET1 __SYSREG(0xa9002a00, u16) +#define ASB2364_FPGA_REG_CPLD10_SET2 __SYSREG(0xa9002a04, u16) + +#define SyncExBus() \ + do { \ + unsigned short w; \ + w = *(volatile short *)0xa9000000; \ + } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_UNIT_FPGA_REGS_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/leds.h b/arch/mn10300/unit-asb2364/include/unit/leds.h new file mode 100644 index 000000000000..03a3933ad323 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/leds.h @@ -0,0 +1,54 @@ +/* Unit-specific leds + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_LEDS_H +#define _ASM_UNIT_LEDS_H + +#include +#include +#include + +#define MN10300_USE_7SEGLEDS 0 + +#define ASB2364_7SEGLEDS __SYSREG(0xA9001630, u32) + +/* + * use the 7-segment LEDs to indicate states + */ + +#if MN10300_USE_7SEGLEDS +/* flip the 7-segment LEDs between "Gdb-" and "----" */ +#define mn10300_set_gdbleds(ONOFF) \ + do { \ + ASB2364_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ + } while (0) +#else +#define mn10300_set_gdbleds(ONOFF) do {} while (0) +#endif + +#if MN10300_USE_7SEGLEDS +/* indicate double-fault by displaying "db-f" on the LEDs */ +#define mn10300_set_dbfleds \ + mov 0x43077f1d,d0 ; \ + mov d0,(ASB2364_7SEGLEDS) +#else +#define mn10300_set_dbfleds +#endif + +#ifndef __ASSEMBLY__ +extern void peripheral_leds_display_exception(enum exception_code); +extern void peripheral_leds_led_chase(void); +extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); +extern void debug_to_serial(const char *, int); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/serial.h b/arch/mn10300/unit-asb2364/include/unit/serial.h new file mode 100644 index 000000000000..7f048bbfdfd7 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/serial.h @@ -0,0 +1,151 @@ +/* Unit-specific 8250 serial ports + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_SERIAL_H +#define _ASM_UNIT_SERIAL_H + +#include +#include +#include +#include + +#define SERIAL_PORT0_BASE_ADDRESS 0xA8200000 + +#define SERIAL_IRQ XIRQ1 /* single serial (TL16C550C) (Lo) */ + +/* + * The ASB2364 has an 12.288 MHz clock + * for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD (12288000 / 16) + +/* + * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports + */ +#ifndef CONFIG_GDBSTUB_ON_TTYSx + +#define SERIAL_PORT_DFNS \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ + .iomem_reg_shift = 1, \ + .io_type = SERIAL_IO_MEM, \ + }, + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ +} + +#endif /* !__ASSEMBLY__ */ + +#else /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ + +#if defined(CONFIG_GDBSTUB_ON_TTYS0) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ + +#elif defined(CONFIG_GDBSTUB_ON_TTYS1) +#error The ASB2364 does not have a /dev/ttyS1 +#endif + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ + char ch; + +#define LSR_WAIT_FOR(STATE) \ + do {} while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) +#define FLOWCTL_QUERY(LINE) \ + ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) +#define FLOWCTL_WAIT_FOR(LINE) \ + do {} while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) +#define FLOWCTL_CLEAR(LINE) \ + do { GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; } while (0) +#define FLOWCTL_SET(LINE) \ + do { GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; } while (0) + + FLOWCTL_SET(DTR); + + for (; n > 0; n--) { + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + + ch = *p++; + if (ch == 0x0a) { + GDBPORT_SERIAL_TX = 0x0d; + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + } + GDBPORT_SERIAL_TX = ch; + } + + FLOWCTL_CLEAR(DTR); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_INITIALIZE \ +do { \ + /* release reset */ \ + ASB2364_FPGA_REG_RESET_UART = 0x0001; \ + SyncExBus(); \ +} while (0) + +#define SERIAL_CHECK_INTERRUPT \ +do { \ + if ((ASB2364_FPGA_REG_IRQ_UART & 0x0001) == 0x0001) { \ + return IRQ_NONE; \ + } \ +} while (0) + +#define SERIAL_CLEAR_INTERRUPT \ +do { \ + ASB2364_FPGA_REG_IRQ_UART = 0x0001; \ + SyncExBus(); \ +} while (0) + +#define SERIAL_SET_INT_MASK \ +do { \ + ASB2364_FPGA_REG_MASK_UART = 0x0001; \ + SyncExBus(); \ +} while (0) + +#define SERIAL_CLEAR_INT_MASK \ +do { \ + ASB2364_FPGA_REG_MASK_UART = 0x0000; \ + SyncExBus(); \ +} while (0) + +#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/unit-asb2364/include/unit/timex.h b/arch/mn10300/unit-asb2364/include/unit/timex.h new file mode 100644 index 000000000000..b5223f705ef8 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/timex.h @@ -0,0 +1,125 @@ +/* timex.h: MN2WS0038 architecture timer specifications + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_TIMEX_H +#define _ASM_UNIT_TIMEX_H + +#ifndef __ASSEMBLY__ +#include +#endif /* __ASSEMBLY__ */ + +#include +#include +#include + +/* + * jiffies counter specifications + */ + +#define TMJCBR_MAX 0xffffff /* 24bit */ +#define TMJCBC TMTBC + +#define TMJCMD TMTMD +#define TMJCBR TMTBR +#define TMJCIRQ TMTIRQ +#define TMJCICR TMTICR + +#ifndef __ASSEMBLY__ + +#define MN10300_SRC_IOBCLK MN10300_IOBCLK + +#ifndef HZ +# error HZ undeclared. +#endif /* !HZ */ + +#define MN10300_JCCLK (MN10300_SRC_IOBCLK) +#define MN10300_TSCCLK (MN10300_SRC_IOBCLK) + +#define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) +#define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) + +/* Check bit width of MTM interval value that sets base register */ +#if (MN10300_JC_PER_HZ - 1) > TMJCBR_MAX +# error MTM tick timer interval value is overflow. +#endif + + +static inline void startup_jiffies_counter(void) +{ + u32 sync; + + TMJCBR = MN10300_JC_PER_HZ - 1; + sync = TMJCBR; + + TMJCMD = TMTMD_TMTLDE; + TMJCMD = TMTMD_TMTCNE; + sync = TMJCMD; + + TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + sync = TMJCICR; +} + +static inline void shutdown_jiffies_counter(void) +{ +} + +#endif /* !__ASSEMBLY__ */ + + +/* + * timestamp counter specifications + */ + +#define TMTSCBR_MAX 0xffffffff +#define TMTSCMD TMSMD +#define TMTSCBR TMSBR +#define TMTSCBC TMSBC +#define TMTSCICR TMSICR + +#ifndef __ASSEMBLY__ + +static inline void startup_timestamp_counter(void) +{ + u32 sync; + + /* set up TMS(Timestamp) 32bit timer register to count real time + * - count down from 4Gig-1 to 0 and wrap at IOBCLK rate + */ + + TMTSCBR = TMTSCBR_MAX; + sync = TMTSCBR; + + TMTSCICR = 0; + sync = TMTSCICR; + + TMTSCMD = TMTMD_TMTLDE; + TMTSCMD = TMTMD_TMTCNE; + sync = TMTSCMD; +} + +static inline void shutdown_timestamp_counter(void) +{ + TMTSCMD = 0; +} + +/* + * we use a cascaded pair of 16-bit down-counting timers to count I/O + * clock cycles for the purposes of time keeping + */ +typedef unsigned long cycles_t; + +static inline cycles_t read_timestamp_counter(void) +{ + return (cycles_t)TMTSCBC; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/unit-asb2364/leds.c b/arch/mn10300/unit-asb2364/leds.c new file mode 100644 index 000000000000..1ff830c372b3 --- /dev/null +++ b/arch/mn10300/unit-asb2364/leds.c @@ -0,0 +1,98 @@ +/* leds.c: ASB2364 peripheral 7seg LEDs x4 support + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + +#include +#include +#include +#include +#include + +#if MN10300_USE_7SEGLEDS +static const u8 asb2364_led_hex_tbl[16] = { + 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0, + 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c +}; + +static const u32 asb2364_led_chase_tbl[6] = { + ~0x02020202, /* top - segA */ + ~0x04040404, /* right top - segB */ + ~0x08080808, /* right bottom - segC */ + ~0x10101010, /* bottom - segD */ + ~0x20202020, /* left bottom - segE */ + ~0x40404040, /* left top - segF */ +}; + +static unsigned asb2364_led_chase; + +void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points) +{ + u32 leds; + + leds = asb2364_led_hex_tbl[(val/1000) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/100) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/10) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[val % 10]; + leds |= points^0x01010101; + + ASB2364_7SEGLEDS = leds; +} + +void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points) +{ + u32 leds; + + leds = asb2364_led_hex_tbl[(val/1000) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/100) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(val/10) % 10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[val % 10]; + leds |= points^0x01010101; + + ASB2364_7SEGLEDS = leds; +} + +/* display triple horizontal bar and exception code */ +void peripheral_leds_display_exception(enum exception_code code) +{ + u32 leds; + + leds = asb2364_led_hex_tbl[(code/0x100) % 0x10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[(code/0x10) % 0x10]; + leds <<= 8; + leds |= asb2364_led_hex_tbl[code % 0x10]; + leds |= 0x6d010101; + + ASB2364_7SEGLEDS = leds; +} + +void peripheral_leds_led_chase(void) +{ + ASB2364_7SEGLEDS = asb2364_led_chase_tbl[asb2364_led_chase]; + asb2364_led_chase++; + if (asb2364_led_chase >= 6) + asb2364_led_chase = 0; +} +#else /* MN10300_USE_7SEGLEDS */ +void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points) { } +void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points) { } +void peripheral_leds_display_exception(enum exception_code code) { } +void peripheral_leds_led_chase(void) { } +#endif /* MN10300_USE_7SEGLEDS */ diff --git a/arch/mn10300/unit-asb2364/unit-init.c b/arch/mn10300/unit-asb2364/unit-init.c new file mode 100644 index 000000000000..a3fc09b43f84 --- /dev/null +++ b/arch/mn10300/unit-asb2364/unit-init.c @@ -0,0 +1,85 @@ +/* ASB2364 initialisation + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * initialise some of the unit hardware before gdbstub is set up + */ +asmlinkage void __init unit_init(void) +{ + /* set up the external interrupts */ + + /* XIRQ[0]: NAND RXBY */ + /* SET_XIRQ_TRIGGER(0, XIRQ_TRIGGER_LOWLEVEL); */ + + /* XIRQ[1]: LAN, UART, I2C, USB, PCI, FPGA */ + SET_XIRQ_TRIGGER(1, XIRQ_TRIGGER_LOWLEVEL); + + /* XIRQ[2]: Extend Slot 1-9 */ + /* SET_XIRQ_TRIGGER(2, XIRQ_TRIGGER_LOWLEVEL); */ + +#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL) && \ + defined(CONFIG_ETHERNET_IRQ_LEVEL) && \ + (CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL) +# error CONFIG_EXT_SERIAL_IRQ_LEVEL != CONFIG_ETHERNET_IRQ_LEVEL +#endif + +#if defined(CONFIG_EXT_SERIAL_IRQ_LEVEL) + set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL)); +#elif defined(CONFIG_ETHERNET_IRQ_LEVEL) + set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_ETHERNET_IRQ_LEVEL)); +#endif +} + +/* + * initialise the rest of the unit hardware after gdbstub is ready + */ +asmlinkage void __init unit_setup(void) +{ + +} + +/* + * initialise the external interrupts used by a unit of this type + */ +void __init unit_init_IRQ(void) +{ + unsigned int extnum; + + for (extnum = 0 ; extnum < NR_XIRQS ; extnum++) { + switch (GET_XIRQ_TRIGGER(extnum)) { + /* LEVEL triggered interrupts should be made + * post-ACK'able as they hold their lines until + * serviced + */ + case XIRQ_TRIGGER_HILEVEL: + case XIRQ_TRIGGER_LOWLEVEL: + mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum)); + break; + default: + break; + } + } + +#define IRQCTL __SYSREG(0xd5000090, u32) + IRQCTL |= 0x02; +} -- cgit v1.2.3 From 5a226c6f5c374a0d565dac609907085b944979b5 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 27 Oct 2010 17:28:56 +0100 Subject: MN10300: Map userspace atomic op regs as a vmalloc page The AM34 processor has an atomic operation that's the equivalent of LL/SC on other architectures. However, rather than being done through a pair of instructions, it's driven by writing to a pair of memory-mapped CPU control registers. One set of these registers (AARU/ADRU/ASRU) is available for use by userspace, but for userspace to access them a PTE must be set up to cover the region. This is done by dedicating the first vmalloc region page to this purpose, setting the permissions on its PTE such that userspace can access the page. glibc is hardcoded to expect the registers to be there. The way atomic ops are done through these registers is straightforward: (1) Write the address of the word you wish to access into AARU. This causes the CPU to go and fetch that word and load it into ADRU. The status bits are also cleared in ASRU. (2) The current data value is read from the ADRU register and modified. (3) To alter the data in RAM, the revised data is written back to the ADRU register, which causes the CPU to attempt to write it back. (4) The ASRU.RW flag (ASRU read watch), ASRU.LW flag (bus lock watch), ASRU.IW (interrupt watch) and the ASRU.BW (bus error watch) flags then must be checked to confirm that the operation wasn't aborted. If any of the watches have been set to true, the operation was aborted. Signed-off-by: Mark Salter Signed-off-by: David Howells --- arch/mn10300/include/asm/pgtable.h | 3 +++ arch/mn10300/mm/init.c | 21 +++++++++++++++++++++ 2 files changed, 24 insertions(+) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h index cd568bf5407e..a1e894b5f65b 100644 --- a/arch/mn10300/include/asm/pgtable.h +++ b/arch/mn10300/include/asm/pgtable.h @@ -182,6 +182,9 @@ extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE]; #define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE) #define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC) +#define __PAGE_USERIO (__PAGE_KERNEL_BASE | _PAGE_PROT_WKWU | _PAGE_NX) +#define PAGE_USERIO __pgprot(__PAGE_USERIO) + /* * Whilst the MN10300 can do page protection for execute (given separate data * and insn TLBs), we are not supporting it at the moment. Write permission, diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c index 1daf97fd7c99..48907cc3bdb7 100644 --- a/arch/mn10300/mm/init.c +++ b/arch/mn10300/mm/init.c @@ -41,6 +41,10 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); unsigned long highstart_pfn, highend_pfn; +#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT +static struct vm_struct user_iomap_vm; +#endif + /* * set up paging */ @@ -73,6 +77,23 @@ void __init paging_init(void) /* pass the memory from the bootmem allocator to the main allocator */ free_area_init(zones_size); +#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + /* The Atomic Operation Unit registers need to be mapped to userspace + * for all processes. The following uses vm_area_register_early() to + * reserve the first page of the vmalloc area and sets the pte for that + * page. + * + * glibc hardcodes this virtual mapping, so we're pretty much stuck with + * it from now on. + */ + user_iomap_vm.flags = VM_USERMAP; + user_iomap_vm.size = 1 << PAGE_SHIFT; + vm_area_register_early(&user_iomap_vm, PAGE_SIZE); + ppte = kernel_vmalloc_ptes; + set_pte(ppte, pfn_pte(USER_ATOMIC_OPS_PAGE_ADDR >> PAGE_SHIFT, + PAGE_USERIO)); +#endif + local_flush_tlb_all(); } -- cgit v1.2.3 From 2502c64eeb125c5d57e3e7dc38320b500d69e088 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 27 Oct 2010 17:28:56 +0100 Subject: MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support Use an ELF HWCAP flag to indicate to the process that the CPU provides LL/SC equivalent atomic operations unit support in addition to BSET/BCLR. Signed-off-by: Mark Salter Signed-off-by: David Howells --- arch/mn10300/include/asm/elf.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h index a30d220de5ca..8157c9267f42 100644 --- a/arch/mn10300/include/asm/elf.h +++ b/arch/mn10300/include/asm/elf.h @@ -31,6 +31,12 @@ #define R_MN10300_SYM_DIFF 33 /* Adjustment when relaxing. */ #define R_MN10300_ALIGN 34 /* Alignment requirement. */ +/* + * AM33/AM34 HW Capabilities + */ +#define HWCAP_MN10300_ATOMIC_OP_UNIT 1 /* Has AM34 Atomic Operations */ + + /* * ELF register definitions.. */ @@ -128,7 +134,11 @@ do { \ * instruction set this CPU supports. This could be done in user space, * but it's not easy, and we've already done it here. */ +#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT +#define ELF_HWCAP (HWCAP_MN10300_ATOMIC_OP_UNIT) +#else #define ELF_HWCAP (0) +#endif /* * This yields a string that ld.so will use to load implementation -- cgit v1.2.3 From 730c1fad0ee22a170d2ee76a904709ee304931c0 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 27 Oct 2010 17:28:57 +0100 Subject: MN10300: Generic time support Implement generic time support for MN10300. Signed-off-by: Mark Salter Signed-off-by: David Howells --- arch/mn10300/Kconfig | 22 +++++ arch/mn10300/include/asm/timex.h | 17 +++- arch/mn10300/kernel/Makefile | 2 + arch/mn10300/kernel/cevt-mn10300.c | 131 +++++++++++++++++++++++++ arch/mn10300/kernel/csrc-mn10300.c | 35 +++++++ arch/mn10300/kernel/internal.h | 13 +++ arch/mn10300/kernel/irq.c | 32 +++--- arch/mn10300/kernel/smp.c | 15 ++- arch/mn10300/kernel/time.c | 79 +++++++++++---- arch/mn10300/unit-asb2303/include/unit/timex.h | 48 ++++----- arch/mn10300/unit-asb2305/include/unit/timex.h | 48 ++++----- arch/mn10300/unit-asb2364/include/unit/timex.h | 74 ++++++++++---- 12 files changed, 401 insertions(+), 115 deletions(-) create mode 100644 arch/mn10300/kernel/cevt-mn10300.c create mode 100644 arch/mn10300/kernel/csrc-mn10300.c (limited to 'arch/mn10300') diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 81e27816aaf8..42ca55a47377 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -56,6 +56,27 @@ config GENERIC_FIND_NEXT_BIT config GENERIC_HWEIGHT def_bool y +config GENERIC_TIME + def_bool y + +config GENERIC_CLOCKEVENTS + def_bool y + +config GENERIC_CLOCKEVENTS_BUILD + def_bool y + depends on GENERIC_CLOCKEVENTS + +config GENERIC_CLOCKEVENTS_BROADCAST + bool + +config CEVT_MN10300 + def_bool y + depends on GENERIC_CLOCKEVENTS + +config CSRC_MN10300 + def_bool y + depends on GENERIC_TIME + config GENERIC_BUG def_bool y @@ -245,6 +266,7 @@ config MN10300_USING_JTAG single-stepping, which are taken over completely by the JTAG unit. source "kernel/Kconfig.hz" +source "kernel/time/Kconfig" config MN10300_RTC bool "Using MN10300 RTC" diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h index ce5719a2ce7c..bd4e90dfe6c2 100644 --- a/arch/mn10300/include/asm/timex.h +++ b/arch/mn10300/include/asm/timex.h @@ -18,15 +18,28 @@ #define CLOCK_TICK_RATE MN10300_JCCLK /* Underlying HZ */ -extern cycles_t cacheflush_time; - #ifdef __KERNEL__ +extern cycles_t cacheflush_time; + static inline cycles_t get_cycles(void) { return read_timestamp_counter(); } +extern int init_clockevents(void); +extern int init_clocksource(void); + +static inline void setup_jiffies_interrupt(int irq, + struct irqaction *action) +{ + u16 tmp; + setup_irq(irq, action); + set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL)); + GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + tmp = GxICR(irq); +} + #endif /* __KERNEL__ */ #endif /* _ASM_TIMEX_H */ diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile index 5b41192f496b..8f5f1e81baf5 100644 --- a/arch/mn10300/kernel/Makefile +++ b/arch/mn10300/kernel/Makefile @@ -28,3 +28,5 @@ obj-$(CONFIG_MN10300_RTC) += rtc.o obj-$(CONFIG_PROFILE) += profile.o profile-low.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_KPROBES) += kprobes.o +obj-$(CONFIG_CSRC_MN10300) += csrc-mn10300.o +obj-$(CONFIG_CEVT_MN10300) += cevt-mn10300.o diff --git a/arch/mn10300/kernel/cevt-mn10300.c b/arch/mn10300/kernel/cevt-mn10300.c new file mode 100644 index 000000000000..d4cb535bf786 --- /dev/null +++ b/arch/mn10300/kernel/cevt-mn10300.c @@ -0,0 +1,131 @@ +/* MN10300 clockevents + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by Mark Salter (msalter@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include "internal.h" + +#ifdef CONFIG_SMP +#if (CONFIG_NR_CPUS > 2) && !defined(CONFIG_GEENERIC_CLOCKEVENTS_BROADCAST) +#error "This doesn't scale well! Need per-core local timers." +#endif +#else /* CONFIG_SMP */ +#define stop_jiffies_counter1() +#define reload_jiffies_counter1(x) +#define TMJC1IRQ TMJCIRQ +#endif + + +static int next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned int cpu = smp_processor_id(); + + if (cpu == 0) { + stop_jiffies_counter(); + reload_jiffies_counter(delta - 1); + } else { + stop_jiffies_counter1(); + reload_jiffies_counter1(delta - 1); + } + return 0; +} + +static void set_clock_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + /* Nothing to do ... */ +} + +static DEFINE_PER_CPU(struct clock_event_device, mn10300_clockevent_device); +static DEFINE_PER_CPU(struct irqaction, timer_irq); + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *cd; + unsigned int cpu = smp_processor_id(); + + if (cpu == 0) + stop_jiffies_counter(); + else + stop_jiffies_counter1(); + + cd = &per_cpu(mn10300_clockevent_device, cpu); + cd->event_handler(cd); + + return IRQ_HANDLED; +} + +static void event_handler(struct clock_event_device *dev) +{ +} + +int __init init_clockevents(void) +{ + struct clock_event_device *cd; + struct irqaction *iact; + unsigned int cpu = smp_processor_id(); + + cd = &per_cpu(mn10300_clockevent_device, cpu); + + if (cpu == 0) { + stop_jiffies_counter(); + cd->irq = TMJCIRQ; + } else { + stop_jiffies_counter1(); + cd->irq = TMJC1IRQ; + } + + cd->name = "Timestamp"; + cd->features = CLOCK_EVT_FEAT_ONESHOT; + + /* Calculate the min / max delta */ + clockevent_set_clock(cd, MN10300_JCCLK); + + cd->max_delta_ns = clockevent_delta2ns(TMJCBR_MAX, cd); + cd->min_delta_ns = clockevent_delta2ns(100, cd); + + cd->rating = 200; + cd->cpumask = cpumask_of(smp_processor_id()); + cd->set_mode = set_clock_mode; + cd->event_handler = event_handler; + cd->set_next_event = next_event; + + iact = &per_cpu(timer_irq, cpu); + iact->flags = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER; + iact->handler = timer_interrupt; + + clockevents_register_device(cd); + +#if defined(CONFIG_SMP) && !defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) + /* setup timer irq affinity so it only runs on this cpu */ + { + struct irq_desc *desc; + desc = irq_to_desc(cd->irq); + cpumask_copy(desc->affinity, cpumask_of(cpu)); + iact->flags |= IRQF_NOBALANCING; + } +#endif + + if (cpu == 0) { + reload_jiffies_counter(MN10300_JC_PER_HZ - 1); + iact->name = "CPU0 Timer"; + } else { + reload_jiffies_counter1(MN10300_JC_PER_HZ - 1); + iact->name = "CPU1 Timer"; + } + + setup_jiffies_interrupt(cd->irq, iact); + + return 0; +} diff --git a/arch/mn10300/kernel/csrc-mn10300.c b/arch/mn10300/kernel/csrc-mn10300.c new file mode 100644 index 000000000000..ba2f0c4d6e01 --- /dev/null +++ b/arch/mn10300/kernel/csrc-mn10300.c @@ -0,0 +1,35 @@ +/* MN10300 clocksource + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by Mark Salter (msalter@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#include +#include +#include +#include "internal.h" + +static cycle_t mn10300_read(struct clocksource *cs) +{ + return read_timestamp_counter(); +} + +static struct clocksource clocksource_mn10300 = { + .name = "TSC", + .rating = 200, + .read = mn10300_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +int __init init_clocksource(void) +{ + startup_timestamp_counter(); + clocksource_set_clock(&clocksource_mn10300, MN10300_TSCCLK); + clocksource_register(&clocksource_mn10300); + return 0; +} diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h index 3b1f48b7e7f4..6a064ab5af07 100644 --- a/arch/mn10300/kernel/internal.h +++ b/arch/mn10300/kernel/internal.h @@ -9,6 +9,9 @@ * 2 of the Licence, or (at your option) any later version. */ +struct clocksource; +struct clock_event_device; + /* * kthread.S */ @@ -30,3 +33,13 @@ extern void mn10300_low_ipi_handler(void); * time.c */ extern irqreturn_t local_timer_interrupt(void); + +/* + * time.c + */ +#ifdef CONFIG_CEVT_MN10300 +extern void clockevent_set_clock(struct clock_event_device *, unsigned int); +#endif +#ifdef CONFIG_CSRC_MN10300 +extern void clocksource_set_clock(struct clocksource *, unsigned int); +#endif diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 80f15725ecad..2f66a45dcd18 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -16,14 +16,6 @@ #include #include -#ifdef CONFIG_SMP -#undef GxICR -#define GxICR(X) CROSS_GxICR(X, irq_affinity_online[X]) - -#undef GxICR_u8 -#define GxICR_u8(X) CROSS_GxICR_u8(X, irq_affinity_online[X]) -#endif /* CONFIG_SMP */ - unsigned long __mn10300_irq_enabled_epsw[NR_CPUS] __cacheline_aligned_in_smp = { [0 ... NR_CPUS - 1] = EPSW_IE | EPSW_IM_7 }; @@ -92,9 +84,11 @@ static void mn10300_cpupic_mask_ack(unsigned int irq) GxICR(irq) = (tmp & GxICR_LEVEL); tmp2 = GxICR(irq); - irq_affinity_online[irq] = any_online_cpu(*irq_desc[irq].affinity); - GxICR(irq) = (tmp & (GxICR_LEVEL | GxICR_ENABLE)) | GxICR_DETECT; - tmp = GxICR(irq); + irq_affinity_online[irq] = + any_online_cpu(*irq_desc[irq].affinity); + CROSS_GxICR(irq, irq_affinity_online[irq]) = + (tmp & (GxICR_LEVEL | GxICR_ENABLE)) | GxICR_DETECT; + tmp = CROSS_GxICR(irq, irq_affinity_online[irq]); } arch_local_irq_restore(flags); @@ -128,8 +122,8 @@ static void mn10300_cpupic_unmask_clear(unsigned int irq) tmp = GxICR(irq); irq_affinity_online[irq] = any_online_cpu(*irq_desc[irq].affinity); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; - tmp = GxICR(irq); + CROSS_GxICR(irq, irq_affinity_online[irq]) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; + tmp = CROSS_GxICR(irq, irq_affinity_online[irq]); } arch_local_irq_restore(flags); @@ -217,7 +211,7 @@ static struct irq_chip mn10300_cpu_pic_level = { .unmask = mn10300_cpupic_unmask_clear, #ifdef CONFIG_SMP .set_affinity = mn10300_cpupic_setaffinity, -#endif /* CONFIG_SMP */ +#endif }; /* @@ -235,7 +229,7 @@ static struct irq_chip mn10300_cpu_pic_edge = { .unmask = mn10300_cpupic_unmask, #ifdef CONFIG_SMP .set_affinity = mn10300_cpupic_setaffinity, -#endif /* CONFIG_SMP */ +#endif }; /* @@ -446,9 +440,9 @@ void migrate_irqs(void) if (irq_affinity_online[irq] == self) { u16 x, tmp; - x = CROSS_GxICR(irq, self); - CROSS_GxICR(irq, self) = x & GxICR_LEVEL; - tmp = CROSS_GxICR(irq, self); + x = GxICR(irq); + GxICR(irq) = x & GxICR_LEVEL; + tmp = GxICR(irq); new = any_online_cpu(irq_desc[irq].affinity); irq_affinity_online[irq] = new; @@ -458,7 +452,7 @@ void migrate_irqs(void) tmp = CROSS_GxICR(irq, new); x &= GxICR_LEVEL | GxICR_ENABLE; - if (CROSS_GxICR(irq, self) & GxICR_REQUEST) + if (GxICR(irq) & GxICR_REQUEST) { x |= GxICR_REQUEST | GxICR_DETECT; CROSS_GxICR(irq, new) = x; tmp = CROSS_GxICR(irq, new); diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c index b80234c28e0d..0dcd1c686ba8 100644 --- a/arch/mn10300/kernel/smp.c +++ b/arch/mn10300/kernel/smp.c @@ -126,7 +126,6 @@ static struct irq_chip mn10300_ipi_type = { static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id); static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id); -static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id); static struct irqaction reschedule_ipi = { .handler = smp_reschedule_interrupt, @@ -136,11 +135,15 @@ static struct irqaction call_function_ipi = { .handler = smp_call_function_interrupt, .name = "smp call function IPI" }; + +#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) +static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id); static struct irqaction local_timer_ipi = { .handler = smp_ipi_timer_interrupt, .flags = IRQF_DISABLED, .name = "smp local timer IPI" }; +#endif /** * init_ipi - Initialise the IPI mechanism @@ -165,11 +168,14 @@ static void init_ipi(void) mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI); /* set up the local timer IPI */ +#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || \ + defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) set_irq_chip_and_handler(LOCAL_TIMER_IPI, &mn10300_ipi_type, handle_percpu_irq); setup_irq(LOCAL_TIMER_IPI, &local_timer_ipi); set_intr_level(LOCAL_TIMER_IPI, LOCAL_TIMER_GxICR_LV); mn10300_ipi_enable(LOCAL_TIMER_IPI); +#endif #ifdef CONFIG_MN10300_CACHE_ENABLED /* set up the cache flush IPI */ @@ -505,6 +511,8 @@ void smp_nmi_call_function_interrupt(void) } } +#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || \ + defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) /** * smp_ipi_timer_interrupt - Local timer IPI handler * @irq: The interrupt number. @@ -516,6 +524,7 @@ static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id) { return local_timer_interrupt(); } +#endif void __init smp_init_cpus(void) { @@ -620,7 +629,6 @@ void smp_prepare_cpu_init(void) int __init start_secondary(void *unused) { smp_cpu_init(); - smp_callin(); while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) cpu_relax(); @@ -629,6 +637,9 @@ int __init start_secondary(void *unused) preempt_disable(); smp_online(); +#ifdef CONFIG_GENERIC_CLOCKEVENTS + init_clockevents(); +#endif cpu_idle(); return 0; } diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c index 0cb9bdb3b6bd..f860a340acc9 100644 --- a/arch/mn10300/kernel/time.c +++ b/arch/mn10300/kernel/time.c @@ -17,6 +17,8 @@ #include #include #include +#include +#include #include #include #include @@ -27,14 +29,6 @@ static unsigned long mn10300_last_tsc; /* time-stamp counter at last time * interrupt occurred */ -static irqreturn_t timer_interrupt(int irq, void *dev_id); - -static struct irqaction timer_irq = { - .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER, - .name = "timer", -}; - static unsigned long sched_clock_multiplier; /* @@ -54,7 +48,7 @@ unsigned long long sched_clock(void) /* read the TSC value */ - tsc = 0 - get_cycles(); /* get_cycles() counts down */ + tsc = get_cycles(); /* expand to 64-bits. * - sched_clock() must be called once a minute or better or the @@ -103,6 +97,7 @@ irqreturn_t local_timer_interrupt(void) return IRQ_HANDLED; } +#ifndef CONFIG_GENERIC_TIME /* * advance the kernel's time keeping clocks (xtime and jiffies) * - we use Timer 0 & 1 cascaded as a clock to nudge us the next time @@ -116,11 +111,11 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) write_seqlock(&xtime_lock); while (tsc = get_cycles(), - elapse = mn10300_last_tsc - tsc, /* time elapsed since last + elapse = tsc - mn10300_last_tsc, /* time elapsed since last * tick */ elapse > MN10300_TSC_PER_HZ ) { - mn10300_last_tsc -= MN10300_TSC_PER_HZ; + mn10300_last_tsc += MN10300_TSC_PER_HZ; /* advance the kernel's time tracking system */ do_timer(1); @@ -135,6 +130,50 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) return ret; } +static struct irqaction timer_irq = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER, + .name = "timer", +}; +#endif /* CONFIG_GENERIC_TIME */ + +#ifdef CONFIG_CSRC_MN10300 +void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock) +{ + u64 temp; + u32 shift; + + /* Find a shift value */ + for (shift = 32; shift > 0; shift--) { + temp = (u64) NSEC_PER_SEC << shift; + do_div(temp, clock); + if ((temp >> 32) == 0) + break; + } + cs->shift = shift; + cs->mult = (u32) temp; +} +#endif + +#if CONFIG_CEVT_MN10300 +void __cpuinit clockevent_set_clock(struct clock_event_device *cd, + unsigned int clock) +{ + u64 temp; + u32 shift; + + /* Find a shift value */ + for (shift = 32; shift > 0; shift--) { + temp = (u64) clock << shift; + do_div(temp, NSEC_PER_SEC); + if ((temp >> 32) == 0) + break; + } + cd->shift = shift; + cd->mult = (u32) temp; +} +#endif + /* * initialise the various timers used by the main part of the kernel */ @@ -146,21 +185,25 @@ void __init time_init(void) */ TMPSCNT |= TMPSCNT_ENABLE; +#ifdef CONFIG_GENERIC_TIME + init_clocksource(); +#else startup_timestamp_counter(); +#endif printk(KERN_INFO "timestamp counter I/O clock running at %lu.%02lu" " (calibrated against RTC)\n", MN10300_TSCCLK / 1000000, (MN10300_TSCCLK / 10000) % 100); - mn10300_last_tsc = TMTSCBC; + mn10300_last_tsc = read_timestamp_counter(); - /* use timer 0 & 1 cascaded to tick at as close to HZ as possible */ - setup_irq(TMJCIRQ, &timer_irq); - - set_intr_level(TMJCIRQ, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL)); - - startup_jiffies_counter(); +#ifdef CONFIG_GENERIC_CLOCKEVENTS + init_clockevents(); +#else + reload_jiffies_counter(MN10300_JC_PER_HZ - 1); + setup_jiffies_interrupt(TMJCIRQ, &timer_irq, CONFIG_TIMER_IRQ_LEVEL); +#endif #ifdef CONFIG_MN10300_WD_TIMER /* start the watchdog timer */ diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h index d1b8dafe7d7d..cc18fe7d8b90 100644 --- a/arch/mn10300/unit-asb2303/include/unit/timex.h +++ b/arch/mn10300/unit-asb2303/include/unit/timex.h @@ -1,6 +1,6 @@ /* ASB2303-specific timer specifications * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2007, 2010 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * * This program is free software; you can redistribute it and/or @@ -24,10 +24,6 @@ */ #define TMJCBR_MAX 0xffff -#define TMJCBC TM01BC - -#define TMJCMD TM01MD -#define TMJCBR TM01BR #define TMJCIRQ TM1IRQ #define TMJCICR TM1ICR @@ -61,34 +57,32 @@ #define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) #define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) -static inline void startup_jiffies_counter(void) +static inline void stop_jiffies_counter(void) { - u16 md, t16; + u16 tmp; + TM01MD = JC_TIMER_CLKSRC | TM1MD_SRC_TM0CASCADE << 8; + tmp = TM01MD; +} - md = JC_TIMER_CLKSRC; - TMJCBR = MN10300_JC_PER_HZ - 1; - t16 = TMJCBR; +static inline void reload_jiffies_counter(u32 cnt) +{ + u32 tmp; - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_INIT_COUNTER | - TM1MD_INIT_COUNTER << 8; + TM01BR = cnt; + tmp = TM01BR; - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_COUNT_ENABLE | - TM1MD_COUNT_ENABLE << 8; + TM01MD = JC_TIMER_CLKSRC | \ + TM1MD_SRC_TM0CASCADE << 8 | \ + TM0MD_INIT_COUNTER | \ + TM1MD_INIT_COUNTER << 8; - t16 = TMJCMD; - TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - t16 = TMJCICR; -} + TM01MD = JC_TIMER_CLKSRC | \ + TM1MD_SRC_TM0CASCADE << 8 | \ + TM0MD_COUNT_ENABLE | \ + TM1MD_COUNT_ENABLE << 8; -static inline void shutdown_jiffies_counter(void) -{ + tmp = TM01MD; } #endif /* !__ASSEMBLY__ */ @@ -148,7 +142,7 @@ typedef unsigned long cycles_t; static inline cycles_t read_timestamp_counter(void) { - return (cycles_t)TMTSCBC; + return (cycles_t)~TMTSCBC; } #endif /* !__ASSEMBLY__ */ diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h index cd8bc14e3ca3..758af30d1a16 100644 --- a/arch/mn10300/unit-asb2305/include/unit/timex.h +++ b/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -1,6 +1,6 @@ /* ASB2305-specific timer specifications * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2007, 2010 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * * This program is free software; you can redistribute it and/or @@ -24,10 +24,6 @@ */ #define TMJCBR_MAX 0xffff -#define TMJCBC TM01BC - -#define TMJCMD TM01MD -#define TMJCBR TM01BR #define TMJCIRQ TM1IRQ #define TMJCICR TM1ICR @@ -61,34 +57,32 @@ #define MN10300_JC_PER_HZ ((MN10300_JCCLK + HZ / 2) / HZ) #define MN10300_TSC_PER_HZ ((MN10300_TSCCLK + HZ / 2) / HZ) -static inline void startup_jiffies_counter(void) +static inline void stop_jiffies_counter(void) { - u16 md, t16; + u16 tmp; + TM01MD = JC_TIMER_CLKSRC | TM1MD_SRC_TM0CASCADE << 8; + tmp = TM01MD; +} - md = JC_TIMER_CLKSRC; - TMJCBR = MN10300_JC_PER_HZ - 1; - t16 = TMJCBR; +static inline void reload_jiffies_counter(u32 cnt) +{ + u32 tmp; - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_INIT_COUNTER | - TM1MD_INIT_COUNTER << 8; + TM01BR = cnt; + tmp = TM01BR; - TMJCMD = - md | - TM1MD_SRC_TM0CASCADE << 8 | - TM0MD_COUNT_ENABLE | - TM1MD_COUNT_ENABLE << 8; + TM01MD = JC_TIMER_CLKSRC | \ + TM1MD_SRC_TM0CASCADE << 8 | \ + TM0MD_INIT_COUNTER | \ + TM1MD_INIT_COUNTER << 8; - t16 = TMJCMD; - TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - t16 = TMJCICR; -} + TM01MD = JC_TIMER_CLKSRC | \ + TM1MD_SRC_TM0CASCADE << 8 | \ + TM0MD_COUNT_ENABLE | \ + TM1MD_COUNT_ENABLE << 8; -static inline void shutdown_jiffies_counter(void) -{ + tmp = TM01MD; } #endif /* !__ASSEMBLY__ */ @@ -148,7 +142,7 @@ typedef unsigned long cycles_t; static inline cycles_t read_timestamp_counter(void) { - return (cycles_t)TMTSCBC; + return (cycles_t)~TMTSCBC; } #endif /* !__ASSEMBLY__ */ diff --git a/arch/mn10300/unit-asb2364/include/unit/timex.h b/arch/mn10300/unit-asb2364/include/unit/timex.h index b5223f705ef8..ddb7ed010706 100644 --- a/arch/mn10300/unit-asb2364/include/unit/timex.h +++ b/arch/mn10300/unit-asb2364/include/unit/timex.h @@ -1,6 +1,6 @@ /* timex.h: MN2WS0038 architecture timer specifications * - * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2002, 2010 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * * This program is free software; you can redistribute it and/or @@ -24,12 +24,7 @@ */ #define TMJCBR_MAX 0xffffff /* 24bit */ -#define TMJCBC TMTBC - -#define TMJCMD TMTMD -#define TMJCBR TMTBR #define TMJCIRQ TMTIRQ -#define TMJCICR TMTICR #ifndef __ASSEMBLY__ @@ -50,25 +45,63 @@ # error MTM tick timer interval value is overflow. #endif +static inline void stop_jiffies_counter(void) +{ + u16 tmp; + TMTMD = 0; + tmp = TMTMD; +} -static inline void startup_jiffies_counter(void) +static inline void reload_jiffies_counter(u32 cnt) { - u32 sync; + u32 tmp; + + TMTBR = cnt; + tmp = TMTBR; - TMJCBR = MN10300_JC_PER_HZ - 1; - sync = TMJCBR; + TMTMD = TMTMD_TMTLDE; + TMTMD = TMTMD_TMTCNE; + tmp = TMTMD; +} - TMJCMD = TMTMD_TMTLDE; - TMJCMD = TMTMD_TMTCNE; - sync = TMJCMD; +#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS) && \ + !defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) +/* + * If we aren't using broadcasting, each core needs its own event timer. + * Since CPU0 uses the tick timer which is 24-bits, we use timer 4 & 5 + * cascaded to 32-bits for CPU1 (but only really use 24-bits to match + * CPU0). + */ - TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - sync = TMJCICR; +#define TMJC1IRQ TM5IRQ + +static inline void stop_jiffies_counter1(void) +{ + u8 tmp; + TM4MD = 0; + TM5MD = 0; + tmp = TM4MD; + tmp = TM5MD; } -static inline void shutdown_jiffies_counter(void) +static inline void reload_jiffies_counter1(u32 cnt) { + u32 tmp; + + TM45BR = cnt; + tmp = TM45BR; + + TM4MD = TM4MD_INIT_COUNTER; + tmp = TM4MD; + + TM5MD = TM5MD_SRC_TM4CASCADE | TM5MD_INIT_COUNTER; + TM5MD = TM5MD_SRC_TM4CASCADE | TM5MD_COUNT_ENABLE; + tmp = TM5MD; + + TM4MD = TM4MD_COUNT_ENABLE; + tmp = TM4MD; } +#endif /* CONFIG_SMP&GENERIC_CLOCKEVENTS&!GENERIC_CLOCKEVENTS_BROADCAST */ #endif /* !__ASSEMBLY__ */ @@ -76,15 +109,16 @@ static inline void shutdown_jiffies_counter(void) /* * timestamp counter specifications */ - #define TMTSCBR_MAX 0xffffffff + +#ifndef __ASSEMBLY__ + +/* Use 32-bit timestamp counter */ #define TMTSCMD TMSMD #define TMTSCBR TMSBR #define TMTSCBC TMSBC #define TMTSCICR TMSICR -#ifndef __ASSEMBLY__ - static inline void startup_timestamp_counter(void) { u32 sync; @@ -117,7 +151,7 @@ typedef unsigned long cycles_t; static inline cycles_t read_timestamp_counter(void) { - return (cycles_t)TMTSCBC; + return (cycles_t)~TMTSCBC; } #endif /* !__ASSEMBLY__ */ -- cgit v1.2.3 From 6044cf1d9426dfd5cdc1e7b9cf8eaed6418e1ff6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Oct 2010 17:28:58 +0100 Subject: MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA Handle the IRQ multiplexer in the FPGA by implementing a cascade interrupt driver for it. Signed-off-by: David Howells --- arch/mn10300/include/asm/irq.h | 12 ++- arch/mn10300/kernel/irq.c | 13 ++- arch/mn10300/unit-asb2364/Makefile | 2 +- arch/mn10300/unit-asb2364/include/unit/fpga-regs.h | 24 +++--- arch/mn10300/unit-asb2364/include/unit/irq.h | 35 ++++++++ arch/mn10300/unit-asb2364/irq-fpga.c | 96 ++++++++++++++++++++++ arch/mn10300/unit-asb2364/unit-init.c | 3 + 7 files changed, 166 insertions(+), 19 deletions(-) create mode 100644 arch/mn10300/unit-asb2364/include/unit/irq.h create mode 100644 arch/mn10300/unit-asb2364/irq-fpga.c (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h index b7b8e175b167..1a73fb3f60c6 100644 --- a/arch/mn10300/include/asm/irq.h +++ b/arch/mn10300/include/asm/irq.h @@ -21,11 +21,15 @@ /* this number is used when no interrupt has been assigned */ #define NO_IRQ INT_MAX -/* hardware irq numbers */ -#ifdef CONFIG_SMP -#define NR_IRQS GxICR_NUM_EXT_IRQS +/* + * hardware irq numbers + * - the ASB2364 has an FPGA with an IRQ multiplexer on it + */ +#ifdef CONFIG_MN10300_UNIT_ASB2364 +#include #else -#define NR_IRQS GxICR_NUM_IRQS +#define NR_CPU_IRQS GxICR_NUM_IRQS +#define NR_IRQS NR_CPU_IRQS #endif /* external hardware irq numbers */ diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 2f66a45dcd18..c2e44597c22b 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -381,9 +381,16 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%3d: ", i); for_each_present_cpu(cpu) seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu)); - seq_printf(p, " %14s.%u", irq_desc[i].chip->name, - (GxICR(i) & GxICR_LEVEL) >> - GxICR_LEVEL_SHIFT); + + if (i < NR_CPU_IRQS) + seq_printf(p, " %14s.%u", + irq_desc[i].chip->name, + (GxICR(i) & GxICR_LEVEL) >> + GxICR_LEVEL_SHIFT); + else + seq_printf(p, " %14s", + irq_desc[i].chip->name); + seq_printf(p, " %s", action->name); for (action = action->next; diff --git a/arch/mn10300/unit-asb2364/Makefile b/arch/mn10300/unit-asb2364/Makefile index 6dd27d65877a..e9d9b90ef6da 100644 --- a/arch/mn10300/unit-asb2364/Makefile +++ b/arch/mn10300/unit-asb2364/Makefile @@ -7,4 +7,4 @@ # # Note 2! The CFLAGS definitions are now in the main makefile... -obj-y := unit-init.o leds.o +obj-y := unit-init.o leds.o irq-fpga.o diff --git a/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h b/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h index a039a50c91db..7cf12054db65 100644 --- a/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h +++ b/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h @@ -14,17 +14,19 @@ #define ASB2364_FPGA_REG_RESET_USB __SYSREG(0xa900130c, u16) #define ASB2364_FPGA_REG_RESET_AV __SYSREG(0xa9001310, u16) -#define ASB2364_FPGA_REG_IRQ_LAN __SYSREG(0xa9001510, u16) -#define ASB2364_FPGA_REG_IRQ_UART __SYSREG(0xa9001514, u16) -#define ASB2364_FPGA_REG_IRQ_I2C __SYSREG(0xa9001518, u16) -#define ASB2364_FPGA_REG_IRQ_USB __SYSREG(0xa900151c, u16) -#define ASB2364_FPGA_REG_IRQ_FPGA __SYSREG(0xa9001524, u16) - -#define ASB2364_FPGA_REG_MASK_LAN __SYSREG(0xa9001590, u16) -#define ASB2364_FPGA_REG_MASK_UART __SYSREG(0xa9001594, u16) -#define ASB2364_FPGA_REG_MASK_I2C __SYSREG(0xa9001598, u16) -#define ASB2364_FPGA_REG_MASK_USB __SYSREG(0xa900159c, u16) -#define ASB2364_FPGA_REG_MASK_FPGA __SYSREG(0xa90015a4, u16) +#define ASB2364_FPGA_REG_IRQ(X) __SYSREG(0xa9001590+((X)*4), u16) +#define ASB2364_FPGA_REG_IRQ_LAN ASB2364_FPGA_REG_IRQ(0) +#define ASB2364_FPGA_REG_IRQ_UART ASB2364_FPGA_REG_IRQ(1) +#define ASB2364_FPGA_REG_IRQ_I2C ASB2364_FPGA_REG_IRQ(2) +#define ASB2364_FPGA_REG_IRQ_USB ASB2364_FPGA_REG_IRQ(3) +#define ASB2364_FPGA_REG_IRQ_FPGA ASB2364_FPGA_REG_IRQ(5) + +#define ASB2364_FPGA_REG_MASK(X) __SYSREG(0xa9001590+((X)*4), u16) +#define ASB2364_FPGA_REG_MASK_LAN ASB2364_FPGA_REG_MASK(0) +#define ASB2364_FPGA_REG_MASK_UART ASB2364_FPGA_REG_MASK(1) +#define ASB2364_FPGA_REG_MASK_I2C ASB2364_FPGA_REG_MASK(2) +#define ASB2364_FPGA_REG_MASK_USB ASB2364_FPGA_REG_MASK(3) +#define ASB2364_FPGA_REG_MASK_FPGA ASB2364_FPGA_REG_MASK(5) #define ASB2364_FPGA_REG_CPLD5_SET1 __SYSREG(0xa9002500, u16) #define ASB2364_FPGA_REG_CPLD5_SET2 __SYSREG(0xa9002504, u16) diff --git a/arch/mn10300/unit-asb2364/include/unit/irq.h b/arch/mn10300/unit-asb2364/include/unit/irq.h new file mode 100644 index 000000000000..786148e46565 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/irq.h @@ -0,0 +1,35 @@ +/* ASB2364 FPGA irq numbers + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _UNIT_IRQ_H +#define _UNIT_IRQ_H + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_SMP +#define NR_CPU_IRQS GxICR_NUM_EXT_IRQS +#else +#define NR_CPU_IRQS GxICR_NUM_IRQS +#endif + +enum { + FPGA_LAN_IRQ = NR_CPU_IRQS, + FPGA_UART_IRQ, + FPGA_I2C_IRQ, + FPGA_USB_IRQ, + FPGA_RESERVED_IRQ, + FPGA_FPGA_IRQ, + NR_IRQS +}; + +extern void __init irq_fpga_init(void); + +#endif /* !__ASSEMBLY__ */ +#endif /* _UNIT_IRQ_H */ diff --git a/arch/mn10300/unit-asb2364/irq-fpga.c b/arch/mn10300/unit-asb2364/irq-fpga.c new file mode 100644 index 000000000000..fcf29754e4d1 --- /dev/null +++ b/arch/mn10300/unit-asb2364/irq-fpga.c @@ -0,0 +1,96 @@ +/* ASB2364 FPGA interrupt multiplexing + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include +#include +#include +#include + +/* + * FPGA PIC operations + */ +static void asb2364_fpga_mask(unsigned int irq) +{ + ASB2364_FPGA_REG_MASK(irq - NR_CPU_IRQS) = 0x0001; + SyncExBus(); +} + +static void asb2364_fpga_ack(unsigned int irq) +{ + ASB2364_FPGA_REG_IRQ(irq - NR_CPU_IRQS) = 0x0001; + SyncExBus(); +} + +static void asb2364_fpga_mask_ack(unsigned int irq) +{ + ASB2364_FPGA_REG_MASK(irq - NR_CPU_IRQS) = 0x0001; + SyncExBus(); + ASB2364_FPGA_REG_IRQ(irq - NR_CPU_IRQS) = 0x0001; + SyncExBus(); +} + +static void asb2364_fpga_unmask(unsigned int irq) +{ + ASB2364_FPGA_REG_MASK(irq - NR_CPU_IRQS) = 0x0000; + SyncExBus(); +} + +static struct irq_chip asb2364_fpga_pic = { + .name = "fpga", + .ack = asb2364_fpga_ack, + .mask = asb2364_fpga_mask, + .mask_ack = asb2364_fpga_mask_ack, + .unmask = asb2364_fpga_unmask, +}; + +/* + * FPGA PIC interrupt handler + */ +static irqreturn_t fpga_interrupt(int irq, void *_mask) +{ + if ((ASB2364_FPGA_REG_IRQ_LAN & 0x0001) != 0x0001) + generic_handle_irq(FPGA_LAN_IRQ); + if ((ASB2364_FPGA_REG_IRQ_UART & 0x0001) != 0x0001) + generic_handle_irq(FPGA_UART_IRQ); + if ((ASB2364_FPGA_REG_IRQ_I2C & 0x0001) != 0x0001) + generic_handle_irq(FPGA_I2C_IRQ); + if ((ASB2364_FPGA_REG_IRQ_USB & 0x0001) != 0x0001) + generic_handle_irq(FPGA_USB_IRQ); + if ((ASB2364_FPGA_REG_IRQ_FPGA & 0x0001) != 0x0001) + generic_handle_irq(FPGA_FPGA_IRQ); + + return IRQ_HANDLED; +} + +/* + * Define an interrupt action for each FPGA PIC output + */ +static struct irqaction fpga_irq[] = { + [0] = { + .handler = fpga_interrupt, + .flags = IRQF_DISABLED | IRQF_SHARED, + .name = "fpga", + }, +}; + +/* + * Initialise the FPGA's PIC + */ +void __init irq_fpga_init(void) +{ + int irq; + + for (irq = NR_CPU_IRQS; irq < NR_IRQS; irq++) + set_irq_chip_and_handler(irq, &asb2364_fpga_pic, handle_level_irq); + + /* the FPGA drives the XIRQ1 input on the CPU PIC */ + setup_irq(XIRQ1, &fpga_irq[0]); +} diff --git a/arch/mn10300/unit-asb2364/unit-init.c b/arch/mn10300/unit-asb2364/unit-init.c index a3fc09b43f84..11440803db10 100644 --- a/arch/mn10300/unit-asb2364/unit-init.c +++ b/arch/mn10300/unit-asb2364/unit-init.c @@ -20,6 +20,7 @@ #include #include #include +#include /* * initialise some of the unit hardware before gdbstub is set up @@ -82,4 +83,6 @@ void __init unit_init_IRQ(void) #define IRQCTL __SYSREG(0xd5000090, u32) IRQCTL |= 0x02; + + irq_fpga_init(); } -- cgit v1.2.3 From 62747cd27ee241ffa32d501e45980cdc441d4a09 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:58 +0100 Subject: MN10300: ASB2364: Add support for SMSC911X and SMC911X Add support for SMSC911X and SMC911X for the ASB2364 unit. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells cc: steve.glendinning@smsc.com cc: netdev@vger.kernel.org --- arch/mn10300/Kconfig | 1 + arch/mn10300/include/asm/smsc911x.h | 1 + arch/mn10300/unit-asb2364/Makefile | 2 + arch/mn10300/unit-asb2364/include/unit/smsc911x.h | 171 ++++++++++++++++++++++ arch/mn10300/unit-asb2364/smsc911x.c | 58 ++++++++ 5 files changed, 233 insertions(+) create mode 100644 arch/mn10300/include/asm/smsc911x.h create mode 100644 arch/mn10300/unit-asb2364/include/unit/smsc911x.h create mode 100644 arch/mn10300/unit-asb2364/smsc911x.c (limited to 'arch/mn10300') diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 42ca55a47377..129ca492e917 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -117,6 +117,7 @@ config MN10300_UNIT_ASB2305 config MN10300_UNIT_ASB2364 bool "ASB2364" + select SMSC911X_ARCH_HOOKS if SMSC911X endchoice diff --git a/arch/mn10300/include/asm/smsc911x.h b/arch/mn10300/include/asm/smsc911x.h new file mode 100644 index 000000000000..2fcd1080322b --- /dev/null +++ b/arch/mn10300/include/asm/smsc911x.h @@ -0,0 +1 @@ +#include diff --git a/arch/mn10300/unit-asb2364/Makefile b/arch/mn10300/unit-asb2364/Makefile index e9d9b90ef6da..b3263ecfc4ff 100644 --- a/arch/mn10300/unit-asb2364/Makefile +++ b/arch/mn10300/unit-asb2364/Makefile @@ -8,3 +8,5 @@ # Note 2! The CFLAGS definitions are now in the main makefile... obj-y := unit-init.o leds.o irq-fpga.o + +obj-$(CONFIG_SMSC911X) += smsc911x.o diff --git a/arch/mn10300/unit-asb2364/include/unit/smsc911x.h b/arch/mn10300/unit-asb2364/include/unit/smsc911x.h new file mode 100644 index 000000000000..4c1ede535fa9 --- /dev/null +++ b/arch/mn10300/unit-asb2364/include/unit/smsc911x.h @@ -0,0 +1,171 @@ +/* Support for the SMSC911x NIC + * + * Copyright (C) 2006 Matsushita Electric Industrial Co., Ltd. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_SMSC911X_H +#define _ASM_UNIT_SMSC911X_H + +#include +#include +#include + +#define MN10300_USE_EXT_EEPROM + + +#define SMSC911X_BASE 0xA8000000UL +#define SMSC911X_BASE_END 0xA8000100UL +#define SMSC911X_IRQ FPGA_LAN_IRQ + +/* + * Allow the FPGA to be initialised by the SMSC911x driver + */ +#undef SMSC_INITIALIZE +#define SMSC_INITIALIZE() \ +do { \ + /* release reset */ \ + ASB2364_FPGA_REG_RESET_LAN = 0x0001; \ + SyncExBus(); \ +} while (0) + +#ifdef MN10300_USE_EXT_EEPROM +#include +#include + +#define EEPROM_ADDRESS 0xA0 +#define MAC_OFFSET 0x0008 +#define USE_IIC_CH 0 /* 0 or 1 */ +#define IIC_OFFSET (0x80000 * USE_IIC_CH) +#define IIC_DTRM __SYSREG(0xd8400000 + IIC_OFFSET, u32) +#define IIC_DREC __SYSREG(0xd8400004 + IIC_OFFSET, u32) +#define IIC_MYADD __SYSREG(0xd8400008 + IIC_OFFSET, u32) +#define IIC_CLK __SYSREG(0xd840000c + IIC_OFFSET, u32) +#define IIC_BRST __SYSREG(0xd8400010 + IIC_OFFSET, u32) +#define IIC_HOLD __SYSREG(0xd8400014 + IIC_OFFSET, u32) +#define IIC_BSTS __SYSREG(0xd8400018 + IIC_OFFSET, u32) +#define IIC_ICR __SYSREG(0xd4000080 + 4 * USE_IIC_CH, u16) + +#define IIC_CLK_PLS ((unsigned short)(MN10300_IOCLK / 100000 - 1)) +#define IIC_CLK_LOW ((unsigned short)(IIC_CLK_PLS / 2)) + +#define SYS_IIC_DTRM_Bit_STA ((unsigned short)0x0400) +#define SYS_IIC_DTRM_Bit_STO ((unsigned short)0x0200) +#define SYS_IIC_DTRM_Bit_ACK ((unsigned short)0x0100) +#define SYS_IIC_DTRM_Bit_DATA ((unsigned short)0x00FF) + +static inline void POLL_INT_REQ(volatile u16 *icr) +{ + unsigned long flags; + u16 tmp; + + while (!(*icr & GxICR_REQUEST)) + ; + flags = arch_local_cli_save(); + tmp = *icr; + *icr = (tmp & GxICR_LEVEL) | GxICR_DETECT; + tmp = *icr; + arch_local_irq_restore(flags); +} + +/* + * Implement the SMSC911x hook for MAC address retrieval + */ +#undef smsc_get_mac +static inline int smsc_get_mac(struct net_device *dev) +{ + unsigned char *mac_buf = dev->dev_addr; + int i; + unsigned short value; + unsigned int data; + int mac_length = 6; + int check; + u16 orig_gicr, tmp; + unsigned long flags; + + /* save original GnICR and clear GnICR.IE */ + flags = arch_local_cli_save(); + orig_gicr = IIC_ICR; + IIC_ICR = orig_gicr & GxICR_LEVEL; + tmp = IIC_ICR; + arch_local_irq_restore(flags); + + IIC_MYADD = 0x00000008; + IIC_CLK = (IIC_CLK_LOW << 16) + (IIC_CLK_PLS); + /* bus hung recovery */ + + while (1) { + check = 0; + for (i = 0; i < 3; i++) { + if ((IIC_BSTS & 0x00000003) == 0x00000003) + check++; + udelay(3); + } + + if (check == 3) { + IIC_BRST = 0x00000003; + break; + } else { + for (i = 0; i < 3; i++) { + IIC_BRST = 0x00000002; + udelay(8); + IIC_BRST = 0x00000003; + udelay(8); + } + } + } + + IIC_BRST = 0x00000002; + IIC_BRST = 0x00000003; + + value = SYS_IIC_DTRM_Bit_STA | SYS_IIC_DTRM_Bit_ACK; + value |= (((unsigned short)EEPROM_ADDRESS & SYS_IIC_DTRM_Bit_DATA) | + (unsigned short)0x0000); + IIC_DTRM = value; + POLL_INT_REQ(&IIC_ICR); + + /** send offset of MAC address in EEPROM **/ + IIC_DTRM = (unsigned char)((MAC_OFFSET & 0xFF00) >> 8); + POLL_INT_REQ(&IIC_ICR); + + IIC_DTRM = (unsigned char)(MAC_OFFSET & 0x00FF); + POLL_INT_REQ(&IIC_ICR); + + udelay(1000); + + value = SYS_IIC_DTRM_Bit_STA; + value |= (((unsigned short)EEPROM_ADDRESS & SYS_IIC_DTRM_Bit_DATA) | + (unsigned short)0x0001); + IIC_DTRM = value; + POLL_INT_REQ(&IIC_ICR); + + IIC_DTRM = 0x00000000; + while (mac_length > 0) { + POLL_INT_REQ(&IIC_ICR); + + data = IIC_DREC; + mac_length--; + if (mac_length == 0) + value = 0x00000300; /* stop IIC bus */ + else if (mac_length == 1) + value = 0x00000100; /* no ack */ + else + value = 0x00000000; /* ack */ + IIC_DTRM = value; + *mac_buf++ = (unsigned char)(data & 0xff); + } + + /* restore GnICR.LV and GnICR.IE */ + flags = arch_local_cli_save(); + IIC_ICR = (orig_gicr & (GxICR_LEVEL | GxICR_ENABLE)); + tmp = IIC_ICR; + arch_local_irq_restore(flags); + + return 0; +} +#endif /* MN10300_USE_EXT_EEPROM */ +#endif /* _ASM_UNIT_SMSC911X_H */ diff --git a/arch/mn10300/unit-asb2364/smsc911x.c b/arch/mn10300/unit-asb2364/smsc911x.c new file mode 100644 index 000000000000..544a73e94c81 --- /dev/null +++ b/arch/mn10300/unit-asb2364/smsc911x.c @@ -0,0 +1,58 @@ +/* Specification for the SMSC911x NIC + * + * Copyright (C) 2006 Matsushita Electric Industrial Co., Ltd. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .start = SMSC911X_BASE, + .end = SMSC911X_BASE_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SMSC911X_IRQ, + .end = SMSC911X_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + } +}; + +/* + * add platform devices + */ +static int __init unit_device_init(void) +{ + platform_device_register(&smsc911x_device); + return 0; +} + +device_initcall(unit_device_init); -- cgit v1.2.3 From 711beda5cfd91c148cab98c18bded3b8dea52111 Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:28:59 +0100 Subject: MN10300: Update the ASB2303 defconfig Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/configs/asb2303_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/mn10300') diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig index d80dfcb2c902..3f749b69ca71 100644 --- a/arch/mn10300/configs/asb2303_defconfig +++ b/arch/mn10300/configs/asb2303_defconfig @@ -12,6 +12,8 @@ CONFIG_SLAB=y CONFIG_PROFILING=y # CONFIG_BLOCK is not set CONFIG_PREEMPT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_MN10300_RTC=y CONFIG_MN10300_TTYSM_CONSOLE=y CONFIG_MN10300_TTYSM0=y -- cgit v1.2.3 From 72d36faffbe2f12233026118e169fc1a10c6cb8e Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:29:00 +0100 Subject: MN10300: Create a defconfig for the ASB2364 board Create a defconfig for the ASB2364 board. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/configs/asb2364_defconfig | 98 ++++++++++++++++++++++++++++++++++ 1 file changed, 98 insertions(+) create mode 100644 arch/mn10300/configs/asb2364_defconfig (limited to 'arch/mn10300') diff --git a/arch/mn10300/configs/asb2364_defconfig b/arch/mn10300/configs/asb2364_defconfig new file mode 100644 index 000000000000..83ce2f27b12a --- /dev/null +++ b/arch/mn10300/configs/asb2364_defconfig @@ -0,0 +1,98 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +CONFIG_CGROUP_NS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_RELAY=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLAB=y +CONFIG_PROFILING=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLOCK is not set +CONFIG_MN10300_UNIT_ASB2364=y +CONFIG_PREEMPT=y +# CONFIG_MN10300_USING_JTAG is not set +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MN10300_TTYSM_CONSOLE=y +CONFIG_MN10300_TTYSM0=y +CONFIG_MN10300_TTYSM0_TIMER2=y +CONFIG_MN10300_TTYSM1=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_CFI_I4=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_SMSC911X=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_PROC_KCORE=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_JFFS2_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set -- cgit v1.2.3 From a5e03ca2fd57a5823b759981bff8d19b46ddad4d Mon Sep 17 00:00:00 2001 From: Akira Takeuchi Date: Wed, 27 Oct 2010 17:29:00 +0100 Subject: MN10300: Change "Matsushita" to "Panasonic". Change externally visible "Matsushita" instances to "Panasonic" throughout the MN10300 arch code. Signed-off-by: Akira Takeuchi Signed-off-by: Kiyoshi Owada Signed-off-by: David Howells --- arch/mn10300/Kconfig | 4 ++-- arch/mn10300/kernel/setup.c | 4 ++-- arch/mn10300/proc-mn103e010/include/proc/proc.h | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 129ca492e917..365766a3d536 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -93,14 +93,14 @@ config GENERIC_HARDIRQS config HOTPLUG_CPU def_bool n -mainmenu "Matsushita MN10300/AM33 Kernel Configuration" +mainmenu "Panasonic MN10300/AM33 Kernel Configuration" source "init/Kconfig" source "kernel/Kconfig.freezer" -menu "Matsushita MN10300 system setup" +menu "Panasonic MN10300 system setup" choice prompt "Unit type" diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index 12514570ed5d..9e7a3209a3e1 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -187,7 +187,7 @@ void __init cpu_init(void) if (type > mn10300_known_cpus) type = mn10300_known_cpus; - printk(KERN_INFO "Matsushita %s, rev %ld\n", + printk(KERN_INFO "Panasonic %s, rev %ld\n", mn10300_cputypes[type], (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S); @@ -246,7 +246,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "processor : %ld\n" - "vendor_id : Matsushita\n" + "vendor_id : " PROCESSOR_VENDOR_NAME "\n" "cpu core : %s\n" "cpu rev : %lu\n" "model name : " PROCESSOR_MODEL_NAME "\n" diff --git a/arch/mn10300/proc-mn103e010/include/proc/proc.h b/arch/mn10300/proc-mn103e010/include/proc/proc.h index 22a2b93f70b7..39c4f8e7d2d3 100644 --- a/arch/mn10300/proc-mn103e010/include/proc/proc.h +++ b/arch/mn10300/proc-mn103e010/include/proc/proc.h @@ -12,7 +12,7 @@ #ifndef _ASM_PROC_PROC_H #define _ASM_PROC_PROC_H -#define PROCESSOR_VENDOR_NAME "Matsushita" +#define PROCESSOR_VENDOR_NAME "Panasonic" #define PROCESSOR_MODEL_NAME "mn103e010" #endif /* _ASM_PROC_PROC_H */ -- cgit v1.2.3 From 7c7fcf762e405eb040ee10d22d656a791f616122 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Oct 2010 17:29:01 +0100 Subject: MN10300: Save frame pointer in thread_info struct rather than global var Save the current exception frame pointer in the thread_info struct rather than in a global variable as the latter makes SMP tricky, especially when preemption is also enabled. This also replaces __frame with current_frame() and rearranges header file inclusions to make it all compile. Signed-off-by: David Howells Acked-by: Akira Takeuchi --- arch/mn10300/include/asm/frame.inc | 56 ++++++++-------------------------- arch/mn10300/include/asm/irq_regs.h | 6 +++- arch/mn10300/include/asm/pgalloc.h | 1 - arch/mn10300/include/asm/processor.h | 46 +++++++++++----------------- arch/mn10300/include/asm/ptrace.h | 6 ---- arch/mn10300/include/asm/smp.h | 13 -------- arch/mn10300/include/asm/thread_info.h | 18 ++++++++--- arch/mn10300/include/asm/uaccess.h | 4 +-- arch/mn10300/kernel/asm-offsets.c | 2 +- arch/mn10300/kernel/mn10300-watchdog.c | 2 +- arch/mn10300/kernel/process.c | 20 ++++++------ arch/mn10300/kernel/signal.c | 20 ++++++------ arch/mn10300/kernel/switch_to.S | 18 ----------- arch/mn10300/kernel/traps.c | 8 ----- 14 files changed, 75 insertions(+), 145 deletions(-) (limited to 'arch/mn10300') diff --git a/arch/mn10300/include/asm/frame.inc b/arch/mn10300/include/asm/frame.inc index 406060e5e1c0..2ee58e3eb6b3 100644 --- a/arch/mn10300/include/asm/frame.inc +++ b/arch/mn10300/include/asm/frame.inc @@ -18,9 +18,7 @@ #ifndef __ASM_OFFSETS_H__ #include #endif -#ifdef CONFIG_SMP -#include -#endif +#include #define pi break @@ -40,27 +38,15 @@ movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp) mov sp,fp # FRAME pointer in A3 add -12,sp # allow for calls to be made -#ifdef CONFIG_SMP -#ifdef CONFIG_PREEMPT /* FIXME */ - mov epsw,d2 - and ~EPSW_IE,epsw -#endif - mov (CPUID),a0 - add a0,a0 - add a0,a0 - mov (___frame,a0),a1 - mov a1,(REG_NEXT,fp) - mov fp,(___frame,a0) -#ifdef CONFIG_PREEMPT /* FIXME */ - mov d2,epsw -#endif -#else /* CONFIG_SMP */ - mov (__frame),a1 - mov a1,(REG_NEXT,fp) - mov fp,(__frame) -#endif /* CONFIG_SMP */ - and ~EPSW_FE,epsw # disable the FPU inside the kernel + # push the exception frame onto the front of the list + GET_THREAD_INFO a1 + mov (TI_frame,a1),a0 + mov a0,(REG_NEXT,fp) + mov fp,(TI_frame,a1) + + # disable the FPU inside the kernel + and ~EPSW_FE,epsw # we may be holding current in E2 #ifdef CONFIG_MN10300_CURRENT_IN_E2 @@ -76,27 +62,11 @@ .macro RESTORE_ALL # peel back the stack to the calling frame # - this permits execve() to discard extra frames due to kernel syscalls -#ifdef CONFIG_SMP -#ifdef CONFIG_PREEMPT /* FIXME */ - mov epsw,d2 - and ~EPSW_IE,epsw -#endif - mov (CPUID),a0 - add a0,a0 - add a0,a0 - mov (___frame,a0),fp - mov fp,sp - mov (REG_NEXT,fp),d0 # userspace has regs->next == 0 - mov d0,(___frame,a0) -#ifdef CONFIG_PREEMPT /* FIXME */ - mov d2,epsw -#endif -#else /* CONFIG_SMP */ - mov (__frame),fp + GET_THREAD_INFO a0 + mov (TI_frame,a0),fp mov fp,sp - mov (REG_NEXT,fp),d0 # userspace has regs->next == 0 - mov d0,(__frame) -#endif /* CONFIG_SMP */ + mov (REG_NEXT,fp),d0 + mov d0,(TI_frame,a0) # userspace has regs->next == 0 #ifndef CONFIG_MN10300_USING_JTAG mov (REG_EPSW,fp),d0 diff --git a/arch/mn10300/include/asm/irq_regs.h b/arch/mn10300/include/asm/irq_regs.h index a848cd232eb4..97d0cb5af807 100644 --- a/arch/mn10300/include/asm/irq_regs.h +++ b/arch/mn10300/include/asm/irq_regs.h @@ -18,7 +18,11 @@ #define ARCH_HAS_OWN_IRQ_REGS #ifndef __ASSEMBLY__ -#define get_irq_regs() (__frame) +static inline __attribute__((const)) +struct pt_regs *get_irq_regs(void) +{ + return current_frame(); +} #endif #endif /* _ASM_IRQ_REGS_H */ diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h index a19f11327cd8..146bacf193ea 100644 --- a/arch/mn10300/include/asm/pgalloc.h +++ b/arch/mn10300/include/asm/pgalloc.h @@ -11,7 +11,6 @@ #ifndef _ASM_PGALLOC_H #define _ASM_PGALLOC_H -#include #include #include #include /* for struct page */ diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h index 75c422abcd6b..4c1b5cc14c19 100644 --- a/arch/mn10300/include/asm/processor.h +++ b/arch/mn10300/include/asm/processor.h @@ -13,10 +13,13 @@ #ifndef _ASM_PROCESSOR_H #define _ASM_PROCESSOR_H +#include +#include #include #include #include -#include +#include +#include /* Forward declaration, a strange C thing */ struct task_struct; @@ -83,10 +86,6 @@ extern void dodgy_tsc(void); */ #define TASK_UNMAPPED_BASE 0x30000000 -typedef struct { - unsigned long seg; -} mm_segment_t; - struct fpu_state_struct { unsigned long fs[32]; /* fpu registers */ unsigned long fpcr; /* fpu control register */ @@ -99,7 +98,6 @@ struct thread_struct { unsigned long a3; /* kernel FP */ unsigned long wchan; unsigned long usp; - struct pt_regs *frame; unsigned long fpu_flags; #define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */ #define THREAD_HAS_FPU 0x00000002 /* T if this task owns the FPU right now */ @@ -113,7 +111,6 @@ struct thread_struct { .sp = 0, \ .a3 = 0, \ .wchan = 0, \ - .frame = NULL, \ } #define INIT_MMAP \ @@ -125,27 +122,20 @@ struct thread_struct { * - need to discard the frame stacked by the kernel thread invoking the execve * syscall (see RESTORE_ALL macro) */ -#if defined(CONFIG_SMP) && defined(CONFIG_PREEMPT) /* FIXME */ -#define start_thread(regs, new_pc, new_sp) do { \ - int cpu; \ - preempt_disable(); \ - cpu = CPUID; \ - set_fs(USER_DS); \ - ___frame[cpu] = current->thread.uregs; \ - ___frame[cpu]->epsw = EPSW_nSL | EPSW_IE | EPSW_IM;\ - ___frame[cpu]->pc = new_pc; \ - ___frame[cpu]->sp = new_sp; \ - preempt_enable(); \ -} while (0) -#else /* CONFIG_SMP && CONFIG_PREEMPT */ -#define start_thread(regs, new_pc, new_sp) do { \ - set_fs(USER_DS); \ - __frame = current->thread.uregs; \ - __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; \ - __frame->pc = new_pc; \ - __frame->sp = new_sp; \ -} while (0) -#endif /* CONFIG_SMP && CONFIG_PREEMPT */ +static inline void start_thread(struct pt_regs *regs, + unsigned long new_pc, unsigned long new_sp) +{ + struct thread_info *ti = current_thread_info(); + struct pt_regs *frame0; + set_fs(USER_DS); + + frame0 = thread_info_to_uregs(ti); + frame0->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; + frame0->pc = new_pc; + frame0->sp = new_sp; + ti->frame = frame0; +} + /* Free all resources held by a thread. */ extern void release_thread(struct task_struct *); diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h index c2b77bd3064a..b6961811d445 100644 --- a/arch/mn10300/include/asm/ptrace.h +++ b/arch/mn10300/include/asm/ptrace.h @@ -86,12 +86,6 @@ struct pt_regs { #ifdef __KERNEL__ -#ifdef CONFIG_SMP -extern struct pt_regs *___frame[]; /* current frame pointer */ -#else -extern struct pt_regs *__frame; /* current frame pointer */ -#endif - #define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) #define instruction_pointer(regs) ((regs)->pc) #define user_stack_pointer(regs) ((regs)->sp) diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h index b8585b4e8cdf..a3930e43a958 100644 --- a/arch/mn10300/include/asm/smp.h +++ b/arch/mn10300/include/asm/smp.h @@ -93,19 +93,6 @@ extern int __cpu_disable(void); extern void __cpu_die(unsigned int cpu); #endif /* CONFIG_HOTPLUG_CPU */ -#ifdef CONFIG_PREEMPT /* FIXME */ -#define __frame \ - ({ \ - struct pt_regs *f; \ - preempt_disable(); \ - f = ___frame[CPUID]; \ - preempt_enable(); \ - f; \ - }) -#else -#define __frame ___frame[CPUID] -#endif - #endif /* __ASSEMBLY__ */ #else /* CONFIG_SMP */ #ifndef __ASSEMBLY__ diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h index 2001cb657a95..aa07a4a5d794 100644 --- a/arch/mn10300/include/asm/thread_info.h +++ b/arch/mn10300/include/asm/thread_info.h @@ -16,10 +16,6 @@ #include -#ifndef __ASSEMBLY__ -#include -#endif - #define PREEMPT_ACTIVE 0x10000000 #ifdef CONFIG_4KSTACKS @@ -38,10 +34,14 @@ * must also be changed */ #ifndef __ASSEMBLY__ +typedef struct { + unsigned long seg; +} mm_segment_t; struct thread_info { struct task_struct *task; /* main task structure */ struct exec_domain *exec_domain; /* execution domain */ + struct pt_regs *frame; /* current exception frame */ unsigned long flags; /* low level flags */ __u32 cpu; /* current CPU */ __s32 preempt_count; /* 0 => preemptable, <0 => BUG */ @@ -55,6 +55,10 @@ struct thread_info { __u8 supervisor_stack[0]; }; +#define thread_info_to_uregs(ti) \ + ((struct pt_regs *) \ + ((unsigned long)ti + THREAD_SIZE - sizeof(struct pt_regs))) + #else /* !__ASSEMBLY__ */ #ifndef __ASM_OFFSETS_H__ @@ -102,6 +106,12 @@ struct thread_info *current_thread_info(void) return ti; } +static inline __attribute__((const)) +struct pt_regs *current_frame(void) +{ + return current_thread_info()->frame; +} + /* how to get the current stack pointer from C */ static inline unsigned long current_stack_pointer(void) { diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h index 47e7951e6893..679dee0bbd08 100644 --- a/arch/mn10300/include/asm/uaccess.h +++ b/arch/mn10300/include/asm/uaccess.h @@ -14,9 +14,8 @@ /* * User space memory access functions */ -#include +#include #include -#include #include #define VERIFY_READ 0 @@ -29,7 +28,6 @@ * * For historical reasons, these macros are grossly misnamed. */ - #define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) #define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF) diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c index 54cc5b6b13f2..96f24fab7de6 100644 --- a/arch/mn10300/kernel/asm-offsets.c +++ b/arch/mn10300/kernel/asm-offsets.c @@ -23,6 +23,7 @@ void foo(void) OFFSET(TI_task, thread_info, task); OFFSET(TI_exec_domain, thread_info, exec_domain); + OFFSET(TI_frame, thread_info, frame); OFFSET(TI_flags, thread_info, flags); OFFSET(TI_cpu, thread_info, cpu); OFFSET(TI_preempt_count, thread_info, preempt_count); @@ -66,7 +67,6 @@ void foo(void) OFFSET(THREAD_SP, thread_struct, sp); OFFSET(THREAD_A3, thread_struct, a3); OFFSET(THREAD_USP, thread_struct, usp); - OFFSET(THREAD_FRAME, thread_struct, frame); #ifdef CONFIG_FPU OFFSET(THREAD_FPU_FLAGS, thread_struct, fpu_flags); OFFSET(THREAD_FPU_STATE, thread_struct, fpu_state); diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c index 965dd61656c3..c5e12bfd9fcd 100644 --- a/arch/mn10300/kernel/mn10300-watchdog.c +++ b/arch/mn10300/kernel/mn10300-watchdog.c @@ -122,7 +122,7 @@ void __init watchdog_go(void) static void watchdog_dump_register(void *dummy) { printk(KERN_ERR "--- Register Dump (CPU%d) ---\n", CPUID); - show_registers(__frame); + show_registers(current_frame()); } #endif diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c index b2e85ed73a54..0d0f8049a17b 100644 --- a/arch/mn10300/kernel/process.c +++ b/arch/mn10300/kernel/process.c @@ -228,6 +228,7 @@ int copy_thread(unsigned long clone_flags, unsigned long c_usp, unsigned long ustk_size, struct task_struct *p, struct pt_regs *kregs) { + struct thread_info *ti = task_thread_info(p); struct pt_regs *c_uregs, *c_kregs, *uregs; unsigned long c_ksp; @@ -248,7 +249,7 @@ int copy_thread(unsigned long clone_flags, /* the new TLS pointer is passed in as arg #5 to sys_clone() */ if (clone_flags & CLONE_SETTLS) - c_uregs->e2 = __frame->d3; + c_uregs->e2 = current_frame()->d3; /* set up the return kernel frame if called from kernel_thread() */ c_kregs = c_uregs; @@ -266,7 +267,7 @@ int copy_thread(unsigned long clone_flags, } /* set up things up so the scheduler can start the new task */ - p->thread.frame = c_kregs; + ti->frame = c_kregs; p->thread.a3 = (unsigned long) c_kregs; p->thread.sp = c_ksp; p->thread.pc = (unsigned long) ret_from_fork; @@ -278,25 +279,26 @@ int copy_thread(unsigned long clone_flags, /* * clone a process - * - tlsptr is retrieved by copy_thread() from __frame->d3 + * - tlsptr is retrieved by copy_thread() from current_frame()->d3 */ asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp, int __user *parent_tidptr, int __user *child_tidptr, int __user *tlsptr) { - return do_fork(clone_flags, newsp ?: __frame->sp, __frame, 0, - parent_tidptr, child_tidptr); + return do_fork(clone_flags, newsp ?: current_frame()->sp, + current_frame(), 0, parent_tidptr, child_tidptr); } asmlinkage long sys_fork(void) { - return do_fork(SIGCHLD, __frame->sp, __frame, 0, NULL, NULL); + return do_fork(SIGCHLD, current_frame()->sp, + current_frame(), 0, NULL, NULL); } asmlinkage long sys_vfork(void) { - return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, __frame->sp, __frame, - 0, NULL, NULL); + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, current_frame()->sp, + current_frame(), 0, NULL, NULL); } asmlinkage long sys_execve(const char __user *name, @@ -310,7 +312,7 @@ asmlinkage long sys_execve(const char __user *name, error = PTR_ERR(filename); if (IS_ERR(filename)) return error; - error = do_execve(filename, argv, envp, __frame); + error = do_execve(filename, argv, envp, current_frame()); putname(filename); return error; } diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c index d4de05ab7864..690f4e9507d7 100644 --- a/arch/mn10300/kernel/signal.c +++ b/arch/mn10300/kernel/signal.c @@ -91,7 +91,7 @@ asmlinkage long sys_sigaction(int sig, */ asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t *uoss) { - return do_sigaltstack(uss, uoss, __frame->sp); + return do_sigaltstack(uss, uoss, current_frame()->sp); } /* @@ -156,10 +156,11 @@ badframe: */ asmlinkage long sys_sigreturn(void) { - struct sigframe __user *frame = (struct sigframe __user *) __frame->sp; + struct sigframe __user *frame; sigset_t set; long d0; + frame = (struct sigframe __user *) current_frame()->sp; if (verify_area(VERIFY_READ, frame, sizeof(*frame))) goto badframe; if (__get_user(set.sig[0], &frame->sc.oldmask)) @@ -176,7 +177,7 @@ asmlinkage long sys_sigreturn(void) recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - if (restore_sigcontext(__frame, &frame->sc, &d0)) + if (restore_sigcontext(current_frame(), &frame->sc, &d0)) goto badframe; return d0; @@ -191,11 +192,11 @@ badframe: */ asmlinkage long sys_rt_sigreturn(void) { - struct rt_sigframe __user *frame = - (struct rt_sigframe __user *) __frame->sp; + struct rt_sigframe __user *frame; sigset_t set; - unsigned long d0; + long d0; + frame = (struct rt_sigframe __user *) current_frame()->sp; if (verify_area(VERIFY_READ, frame, sizeof(*frame))) goto badframe; if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) @@ -207,10 +208,11 @@ asmlinkage long sys_rt_sigreturn(void) recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - if (restore_sigcontext(__frame, &frame->uc.uc_mcontext, &d0)) + if (restore_sigcontext(current_frame(), &frame->uc.uc_mcontext, &d0)) goto badframe; - if (do_sigaltstack(&frame->uc.uc_stack, NULL, __frame->sp) == -EFAULT) + if (do_sigaltstack(&frame->uc.uc_stack, NULL, current_frame()->sp) == + -EFAULT) goto badframe; return d0; @@ -572,7 +574,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags) if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); - tracehook_notify_resume(__frame); + tracehook_notify_resume(current_frame()); if (current->replacement_session_keyring) key_replace_session_keyring(); } diff --git a/arch/mn10300/kernel/switch_to.S b/arch/mn10300/kernel/switch_to.S index b08cb2e3aebd..9074d0fb8788 100644 --- a/arch/mn10300/kernel/switch_to.S +++ b/arch/mn10300/kernel/switch_to.S @@ -38,15 +38,6 @@ ENTRY(__switch_to) mov d1,a1 # save prev context -#ifdef CONFIG_SMP - mov (CPUID),a2 - add a2,a2 - add a2,a2 - mov (___frame,a2),d0 -#else /* CONFIG_SMP */ - mov (__frame),d0 -#endif /* CONFIG_SMP */ - mov d0,(THREAD_FRAME,a0) mov __switch_back,d0 mov d0,(THREAD_PC,a0) mov sp,a2 @@ -68,15 +59,6 @@ ENTRY(__switch_to) mov a2,e2 #endif - mov (THREAD_FRAME,a1),a2 -#ifdef CONFIG_SMP - mov (CPUID),a0 - add a0,a0 - add a0,a0 - mov a2,(___frame,a0) -#else /* CONFIG_SMP */ - mov a2,(__frame) -#endif /* CONFIG_SMP */ mov (THREAD_PC,a1),a2 mov d2,d0 # for ret_from_fork mov d0,a0 # for __switch_to diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index c924a1dd3323..b90c3f160c77 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -45,14 +45,6 @@ #error "INTERRUPT_VECTOR_BASE not aligned to 16MiB boundary!" #endif -#ifdef CONFIG_SMP -struct pt_regs *___frame[NR_CPUS]; /* current frame pointer */ -EXPORT_SYMBOL(___frame); -#else /* CONFIG_SMP */ -struct pt_regs *__frame; /* current frame pointer */ -EXPORT_SYMBOL(__frame); -#endif /* CONFIG_SMP */ - int kstack_depth_to_print = 24; spinlock_t die_lock = __SPIN_LOCK_UNLOCKED(die_lock); -- cgit v1.2.3