From 6fc655ed4986f88b91e3f7b339222fc1c4ffba08 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 27 Sep 2022 12:19:18 +0100 Subject: riscv: dts: microchip: icicle: update pci address properties For the v2022.09 reference design the PCI root port's data region has been moved to FIC1 from FIC0. This is a shorter path, allowing for higher clock rates and improved through-put. As a result, the address at which the PCIe's data region appears to the core complex has changed. The config region's address is unchanged. As FIC0 is no longer used, its clock can be removed too. Signed-off-by: Conor Dooley --- arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/riscv') diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi index 688ef0fc5a64..9ca2ac4ad8e2 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi @@ -38,13 +38,13 @@ clock-frequency = <125000000>; }; - pcie: pcie@2000000000 { + pcie: pcie@3000000000 { compatible = "microchip,pcie-host-1.0"; #address-cells = <0x3>; #interrupt-cells = <0x1>; #size-cells = <0x2>; device_type = "pci"; - reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg = <0x30 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; reg-names = "cfg", "apb"; bus-range = <0x0 0x7f>; interrupt-parent = <&plic>; @@ -54,9 +54,9 @@ <0 0 0 3 &pcie_intc 2>, <0 0 0 4 &pcie_intc 3>; interrupt-map-mask = <0 0 0 7>; - clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; - clock-names = "fic0", "fic1", "fic3"; - ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + clocks = <&fabric_clk1>, <&fabric_clk3>; + clock-names = "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x30 0x8000000 0x0 0x80000000>; dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>; msi-parent = <&pcie>; msi-controller; -- cgit v1.2.3