From 2b3e50234eafc40a04f5f4a2b7bb24b506fd7e87 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 2 Nov 2010 19:38:53 +0000 Subject: MIPS: Swarm: Fix typo in symbol name: RTC_M4LT81 -> RTC_M41T81 Signed-off-by: Ralf Baechle --- arch/mips/sibyte/swarm/setup.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index c308989fc464..41707a245dea 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -82,7 +82,7 @@ int swarm_be_handler(struct pt_regs *regs, int is_fixup) enum swarm_rtc_type { RTC_NONE, RTC_XICOR, - RTC_M4LT81 + RTC_M41T81, }; enum swarm_rtc_type swarm_rtc_type; @@ -96,7 +96,7 @@ void read_persistent_clock(struct timespec *ts) sec = xicor_get_time(); break; - case RTC_M4LT81: + case RTC_M41T81: sec = m41t81_get_time(); break; @@ -115,7 +115,7 @@ int rtc_mips_set_time(unsigned long sec) case RTC_XICOR: return xicor_set_time(sec); - case RTC_M4LT81: + case RTC_M41T81: return m41t81_set_time(sec); case RTC_NONE: @@ -141,7 +141,7 @@ void __init plat_mem_setup(void) if (xicor_probe()) swarm_rtc_type = RTC_XICOR; if (m41t81_probe()) - swarm_rtc_type = RTC_M4LT81; + swarm_rtc_type = RTC_M41T81; #ifdef CONFIG_VT screen_info = (struct screen_info) { -- cgit v1.2.3 From a989ff898f9740651d00388c33bdf4f2a7914920 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 4 Nov 2010 11:13:59 +0000 Subject: MIPS: Don't stomp on caller's ->regs[2] in copy_thread() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We never needed that (->regs[2] is overwritten on return from syscall paths with return value of syscall, so storing it there early made no sense) and with new restart logics since d27240bf7e61d2656de18e158ec910a902030847 it has become really bad - we lose the original syscall number before the place where we decide that we might need a syscall restart. Note that for child we do need the assignment to regs[2] - it won't go through the normal return from syscall path. [Ralf: Issue found and reported by Lluís; initial investigations by me; bug finally found and patch by Al; testing by me and Lluís.] Signed-off-by: Al Viro Tested-by: Lluís Batlle i Rossell Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 99960940d4a4..ae167df73ddd 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -142,7 +142,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, childregs->regs[7] = 0; /* Clear error flag */ childregs->regs[2] = 0; /* Child gets zero as return value */ - regs->regs[2] = p->pid; if (childregs->cp0_status & ST0_CU0) { childregs->regs[28] = (unsigned long) ti; -- cgit v1.2.3 From fe749aab1d21cbb4d87527a7df8799583c233496 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 4 Nov 2010 23:25:56 +0100 Subject: MIPS: jz4740: qi_lb60: Fix gpio for the 6th row of the keyboard matrix This patch fixes the gpio number for the 6th row of the keyboard matrix. (And fixes a typo in my name...) Signed-off-by: Lars-Peter Clausen Cc: linux-mips@linux-mips.org Cc: stable@kernel.org Signed-off-by: https://patchwork.linux-mips.org/patch/1754/ Signed-off-by: Ralf Baechle --- arch/mips/jz4740/board-qi_lb60.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c index 5742bb4d78f4..5c0a3575877c 100644 --- a/arch/mips/jz4740/board-qi_lb60.c +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -5,7 +5,7 @@ * * Copyright (c) 2009 Qi Hardware inc., * Author: Xiangfu Liu - * Copyright 2010, Lars-Petrer Clausen + * Copyright 2010, Lars-Peter Clausen * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 or later @@ -235,7 +235,7 @@ static const unsigned int qi_lb60_keypad_rows[] = { QI_LB60_GPIO_KEYIN(3), QI_LB60_GPIO_KEYIN(4), QI_LB60_GPIO_KEYIN(5), - QI_LB60_GPIO_KEYIN(7), + QI_LB60_GPIO_KEYIN(6), QI_LB60_GPIO_KEYIN8, }; -- cgit v1.2.3 From 1d210386f6ef9000b1cd723cf453c5eb0377e722 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 4 Nov 2010 23:25:57 +0100 Subject: MIPS: jz4740: Fix section mismatch in prom.c This patch fixes the following section mismatch: WARNING: arch/mips/built-in.o(.text+0xc): Section mismatch in reference from the function jz4740_init_cmdline() to the variable .init.data:arcs_cmdline While were at it, make jz4740_init_cmdline static as well. Signed-off-by: Lars-Peter Clausen Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1755/ Signed-off-by: Ralf Baechle --- arch/mips/jz4740/prom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c index cfeac15eb2e4..4a70407f55bb 100644 --- a/arch/mips/jz4740/prom.c +++ b/arch/mips/jz4740/prom.c @@ -23,7 +23,7 @@ #include #include -void jz4740_init_cmdline(int argc, char *argv[]) +static __init void jz4740_init_cmdline(int argc, char *argv[]) { unsigned int count = COMMAND_LINE_SIZE - 1; int i; -- cgit v1.2.3 From 1c0d52b9b5e6ca277c13d6fece9c34ed3159423d Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 1 Nov 2010 17:43:07 -0700 Subject: MIPS: Don't clobber personality high bits. The high bits of current->personality carry settings that we don't want to clobber on each exec. Only clobber them if the lower bits that indicate either PER_LINUX or PER_LINUX32 are invalid. The clobbering prevents us from using useful bits like ADDR_NO_RANDOMIZE. Reported-by: Camm Maguire Signed-off-by: David Daney Cc: Camm Maguire Patchwork: https://patchwork.linux-mips.org/patch/1750/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/elf.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index fd1d39eb7431..455c0ac7d4ea 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -249,7 +249,8 @@ extern struct mips_abi mips_abi_n32; #define SET_PERSONALITY(ex) \ do { \ - set_personality(PER_LINUX); \ + if (personality(current->personality) != PER_LINUX) \ + set_personality(PER_LINUX); \ \ current->thread.abi = &mips_abi; \ } while (0) @@ -296,6 +297,8 @@ do { \ #define SET_PERSONALITY(ex) \ do { \ + unsigned int p; \ + \ clear_thread_flag(TIF_32BIT_REGS); \ clear_thread_flag(TIF_32BIT_ADDR); \ \ @@ -304,7 +307,8 @@ do { \ else \ current->thread.abi = &mips_abi; \ \ - if (current->personality != PER_LINUX32) \ + p = personality(current->personality); \ + if (p != PER_LINUX32 && p != PER_LINUX) \ set_personality(PER_LINUX); \ } while (0) -- cgit v1.2.3 From d62c9ced7ca783e64ff4d9d3d1340cfe2284d47b Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 1 Nov 2010 17:43:08 -0700 Subject: MIPS: compat: Don't clobber personality bits in 32-bit sys_personality(). If PER_LINUX32 has been set on a 32-bit kernel, only twiddle with the low-order personality bits, let the upper bits pass through. Signed-off-by: David Daney To: linux-mips@linux-mips.org Cc: Camm Maguire Patchwork: https://patchwork.linux-mips.org/patch/1751/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 6343b4a5b835..876a75cc376f 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -251,14 +251,15 @@ SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz, SYSCALL_DEFINE1(32_personality, unsigned long, personality) { + unsigned int p = personality & 0xffffffff; int ret; - personality &= 0xffffffff; + if (personality(current->personality) == PER_LINUX32 && - personality == PER_LINUX) - personality = PER_LINUX32; - ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + personality(p) == PER_LINUX) + p = (p & ~PER_MASK) | PER_LINUX32; + ret = sys_personality(p); + if (ret != -1 && personality(ret) == PER_LINUX32) + ret = (ret & ~PER_MASK) | PER_LINUX; return ret; } -- cgit v1.2.3 From 863abad4f644b6c12bc8176206b35fa7e7cfe1a9 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sat, 30 Oct 2010 18:37:16 +0200 Subject: MIPS: VPE loader: Check vmalloc return value in vpe_open The return value of the vmalloc() call in arch/mips/kernel/vpe.c::vpe_open() is not checked, so we potentially store a null pointer in v->pbuffer. Add a check for a null return and then return -ENOMEM in that case. [Ralf: The check added by Jesper's original patch is where it logically should be. Adding it eleminated the need for the checks in a few other places, so I removed them. There still is a zillion of other things that need to be fixed in this file / API.] Signed-off-by: Jesper Juhl Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1747/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/vpe.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 3eb3cde2f661..6a1fdfef8fde 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -1092,6 +1092,10 @@ static int vpe_open(struct inode *inode, struct file *filp) /* this of-course trashes what was there before... */ v->pbuffer = vmalloc(P_SIZE); + if (!v->pbuffer) { + pr_warning("VPE loader: unable to allocate memory\n"); + return -ENOMEM; + } v->plen = P_SIZE; v->load_addr = NULL; v->len = 0; @@ -1149,10 +1153,9 @@ static int vpe_release(struct inode *inode, struct file *filp) if (ret < 0) v->shared_ptr = NULL; - // cleanup any temp buffers - if (v->pbuffer) - vfree(v->pbuffer); + vfree(v->pbuffer); v->plen = 0; + return ret; } @@ -1169,11 +1172,6 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer, if (v == NULL) return -ENODEV; - if (v->pbuffer == NULL) { - printk(KERN_ERR "VPE loader: no buffer for program\n"); - return -ENOMEM; - } - if ((count + v->len) > v->plen) { printk(KERN_WARNING "VPE loader: elf size too big. Perhaps strip uneeded symbols\n"); -- cgit v1.2.3 From ec79812580e360081b58c3e2e8b5b69b8080b5a0 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Mon, 8 Nov 2010 21:25:24 +0800 Subject: MIPS: Loongson: Add return value check for strict_strtoul() cc1: warnings being treated as errors arch/mips/loongson/common/env.c: In function 'prom_init_env': arch/mips/loongson/common/env.c:49: error: ignoring return value of 'strict_strtol', declared with attribute warn_unused_result arch/mips/loongson/common/env.c:50: error: ignoring return value of 'strict_strtol', declared with attribute warn_unused_result arch/mips/loongson/common/env.c:51: error: ignoring return value of 'strict_strtol', declared with attribute warn_unused_result arch/mips/loongson/common/env.c:52: error: ignoring return value of 'strict_strtol', declared with attribute warn_unused_result Signed-off-by: Wu Zhangjin Cc: linux-mips Patchwork: https://patchwork.linux-mips.org/patch/1762/ Signed-off-by: Ralf Baechle --- arch/mips/loongson/common/env.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c index ae4cff97a56c..11b193f848f8 100644 --- a/arch/mips/loongson/common/env.c +++ b/arch/mips/loongson/common/env.c @@ -29,9 +29,9 @@ unsigned long memsize, highmemsize; #define parse_even_earlier(res, option, p) \ do { \ + int ret; \ if (strncmp(option, (char *)p, strlen(option)) == 0) \ - strict_strtol((char *)p + strlen(option"="), \ - 10, &res); \ + ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \ } while (0) void __init prom_init_env(void) -- cgit v1.2.3 From 690ca2ce0c824e8d3da7b2e273c2c873ab96d1e6 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Mon, 8 Nov 2010 17:23:52 +0900 Subject: MIPS: Alchemy: Add return value check for strict_strtoul() arch/mips/alchemy/devboards/prom.c: In function 'prom_init': arch/mips/alchemy/devboards/prom.c:60: error: ignoring return value of 'strict_strtoul', declared with attribute warn_unused_result Signed-off-by: Yoichi Yuasa Cc: linux-mips Patchwork: https://patchwork.linux-mips.org/patch/1761/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/devboards/prom.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c index b30df5c97ad3..baeb21385058 100644 --- a/arch/mips/alchemy/devboards/prom.c +++ b/arch/mips/alchemy/devboards/prom.c @@ -54,10 +54,9 @@ void __init prom_init(void) prom_init_cmdline(); memsize_str = prom_getenv("memsize"); - if (!memsize_str) + if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize)) memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE; - else - strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); } -- cgit v1.2.3 From 3bd27e329ca80f4946efdd12bf1f5a9bf0886e76 Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 5 Nov 2010 15:12:48 -0700 Subject: MIPS: Rework GENERIC_HARDIRQS Kconfig. Recent changes to CONFIG_GENERIC_HARDIRQS have caused us to start getting: warning: (SMP && SYS_SUPPORTS_SMP) selects IRQ_PER_CPU which has unmet direct dependencies (HAVE_GENERIC_HARDIRQS) Rearranging our Kconfig quiets the message. Signed-off-by: David Daney To: linux-mips@linux-mips.org Cc: Thomas Gleixner Patchwork: https://patchwork.linux-mips.org/patch/1757/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 67a2fa2caa49..7fc6bd1d3852 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -19,6 +19,8 @@ config MIPS select GENERIC_ATOMIC64 if !64BIT select HAVE_DMA_ATTRS select HAVE_DMA_API_DEBUG + select HAVE_GENERIC_HARDIRQS + select GENERIC_IRQ_PROBE menu "Machine selection" @@ -1921,20 +1923,6 @@ config CPU_R4000_WORKAROUNDS config CPU_R4400_WORKAROUNDS bool -# -# Use the generic interrupt handling code in kernel/irq/: -# -config GENERIC_HARDIRQS - bool - default y - -config GENERIC_IRQ_PROBE - bool - default y - -config IRQ_PER_CPU - bool - # # - Highmem only makes sense for the 32-bit kernel. # - The current highmem code will only work properly on physically indexed -- cgit v1.2.3 From ff42d62047e45075c54a5543bd4f110dfd032d11 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sun, 31 Oct 2010 23:49:57 +0100 Subject: MIPS: AR7: Fix double ar7_gpio_init declaration Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1748/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-ar7/ar7.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h index 7919d76186bf..31c7ff539830 100644 --- a/arch/mips/include/asm/mach-ar7/ar7.h +++ b/arch/mips/include/asm/mach-ar7/ar7.h @@ -202,6 +202,4 @@ static inline void ar7_device_off(u32 bit) int __init ar7_gpio_init(void); -int __init ar7_gpio_init(void); - #endif /* __AR7_H__ */ -- cgit v1.2.3 From 0bc6791707694c77b3543de39f77972a65de917a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sun, 31 Oct 2010 23:49:58 +0100 Subject: MIPS: AR7: Fix loops per jiffies on TNETD7200 devices TNETD7200 run their CPU clock faster than the default CPU clock we assume. In order to have the correct loops per jiffies settings, initialize clocks right before setting mips_hpt_frequency. As a side effect, we can no longer use msleep in clocks.c which requires other parts of the kernel to be initialized, so replace these with mdelay. Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1749/ Signed-off-by: Ralf Baechle --- arch/mips/ar7/clock.c | 9 +++------ arch/mips/ar7/time.c | 3 +++ arch/mips/include/asm/mach-ar7/ar7.h | 1 + 3 files changed, 7 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c index fc0e7154e8d6..2ca4ada1c291 100644 --- a/arch/mips/ar7/clock.c +++ b/arch/mips/ar7/clock.c @@ -239,12 +239,12 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock, calculate(base_clock, frequency, &prediv, &postdiv, &mul); writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl); - msleep(1); + mdelay(1); writel(4, &clock->pll); while (readl(&clock->pll) & PLL_STATUS) ; writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll); - msleep(75); + mdelay(75); } static void __init tnetd7300_init_clocks(void) @@ -456,7 +456,7 @@ void clk_put(struct clk *clk) } EXPORT_SYMBOL(clk_put); -int __init ar7_init_clocks(void) +void __init ar7_init_clocks(void) { switch (ar7_chip_id()) { case AR7_CHIP_7100: @@ -472,7 +472,4 @@ int __init ar7_init_clocks(void) } /* adjust vbus clock rate */ vbus_clk.rate = bus_clk.rate / 2; - - return 0; } -arch_initcall(ar7_init_clocks); diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c index 5fb8a0134085..22c93213b233 100644 --- a/arch/mips/ar7/time.c +++ b/arch/mips/ar7/time.c @@ -30,6 +30,9 @@ void __init plat_time_init(void) { struct clk *cpu_clk; + /* Initialize ar7 clocks so the CPU clock frequency is correct */ + ar7_init_clocks(); + cpu_clk = clk_get(NULL, "cpu"); if (IS_ERR(cpu_clk)) { printk(KERN_ERR "unable to get cpu clock\n"); diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h index 31c7ff539830..07d3fadb2443 100644 --- a/arch/mips/include/asm/mach-ar7/ar7.h +++ b/arch/mips/include/asm/mach-ar7/ar7.h @@ -201,5 +201,6 @@ static inline void ar7_device_off(u32 bit) } int __init ar7_gpio_init(void); +void __init ar7_init_clocks(void); #endif /* __AR7_H__ */ -- cgit v1.2.3 From 515b029d005b5694cf612a0a5ca6f861a7e45362 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 21 Oct 2010 16:32:26 -0700 Subject: MIPS: Send proper signal and siginfo on FP emulator faults. We were unconditionally sending SIGBUS with an empty siginfo on FP emulator faults. This differs from what happens when real floating point hardware would get a fault. For most faults we need to send SIGSEGV with the faulting address filled in in the struct siginfo. Reported-by: Camm Maguire Signed-off-by: David Daney To: linux-mips@linux-mips.org Cc: Camm Maguire Patchwork: https://patchwork.linux-mips.org/patch/1727/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 44 +++++++++++++---- arch/mips/math-emu/cp1emu.c | 116 ++++++++++++++++++++++++++++++++++++-------- 2 files changed, 130 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 8e9fbe75894e..e97104302541 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -83,7 +83,8 @@ extern asmlinkage void handle_mcheck(void); extern asmlinkage void handle_reserved(void); extern int fpu_emulator_cop1Handler(struct pt_regs *xcp, - struct mips_fpu_struct *ctx, int has_fpu); + struct mips_fpu_struct *ctx, int has_fpu, + void *__user *fault_addr); void (*board_be_init)(void); int (*board_be_handler)(struct pt_regs *regs, int is_fixup); @@ -661,12 +662,36 @@ asmlinkage void do_ov(struct pt_regs *regs) force_sig_info(SIGFPE, &info, current); } +static int process_fpemu_return(int sig, void __user *fault_addr) +{ + if (sig == SIGSEGV || sig == SIGBUS) { + struct siginfo si = {0}; + si.si_addr = fault_addr; + si.si_signo = sig; + if (sig == SIGSEGV) { + if (find_vma(current->mm, (unsigned long)fault_addr)) + si.si_code = SEGV_ACCERR; + else + si.si_code = SEGV_MAPERR; + } else { + si.si_code = BUS_ADRERR; + } + force_sig_info(sig, &si, current); + return 1; + } else if (sig) { + force_sig(sig, current); + return 1; + } else { + return 0; + } +} + /* * XXX Delayed fp exceptions when doing a lazy ctx switch XXX */ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) { - siginfo_t info; + siginfo_t info = {0}; if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE) == NOTIFY_STOP) @@ -675,6 +700,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) if (fcr31 & FPU_CSR_UNI_X) { int sig; + void __user *fault_addr = NULL; /* * Unimplemented operation exception. If we've got the full @@ -690,7 +716,8 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) lose_fpu(1); /* Run the emulator */ - sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1); + sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1, + &fault_addr); /* * We can't allow the emulated instruction to leave any of @@ -702,8 +729,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) own_fpu(1); /* Using the FPU again. */ /* If something went wrong, signal */ - if (sig) - force_sig(sig, current); + process_fpemu_return(sig, fault_addr); return; } else if (fcr31 & FPU_CSR_INV_X) @@ -996,11 +1022,11 @@ asmlinkage void do_cpu(struct pt_regs *regs) if (!raw_cpu_has_fpu) { int sig; + void __user *fault_addr = NULL; sig = fpu_emulator_cop1Handler(regs, - ¤t->thread.fpu, 0); - if (sig) - force_sig(sig, current); - else + ¤t->thread.fpu, + 0, &fault_addr); + if (!process_fpemu_return(sig, fault_addr)) mt_ase_fp_affinity(); } diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index b2ad1b0910ff..d32cb0503110 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -64,7 +64,7 @@ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *, #if __mips >= 4 && __mips != 32 static int fpux_emu(struct pt_regs *, - struct mips_fpu_struct *, mips_instruction); + struct mips_fpu_struct *, mips_instruction, void *__user *); #endif /* Further private data for which no space exists in mips_fpu_struct */ @@ -208,16 +208,23 @@ static inline int cop1_64bit(struct pt_regs *xcp) * Two instructions if the instruction is in a branch delay slot. */ -static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) +static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx, + void *__user *fault_addr) { mips_instruction ir; unsigned long emulpc, contpc; unsigned int cond; - if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) { + if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)xcp->cp0_epc; return SIGBUS; } + if (__get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)xcp->cp0_epc; + return SIGSEGV; + } /* XXX NEC Vr54xx bug workaround */ if ((xcp->cp0_cause & CAUSEF_BD) && !isBranchInstr(&ir)) @@ -245,10 +252,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) #endif return SIGILL; } - if (get_user(ir, (mips_instruction __user *) emulpc)) { + if (!access_ok(VERIFY_READ, emulpc, sizeof(mips_instruction))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)emulpc; return SIGBUS; } + if (__get_user(ir, (mips_instruction __user *) emulpc)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)emulpc; + return SIGSEGV; + } /* __compute_return_epc() will have updated cp0_epc */ contpc = xcp->cp0_epc; /* In order not to confuse ptrace() et al, tweak context */ @@ -269,10 +282,17 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) u64 val; MIPS_FPU_EMU_INC_STATS(loads); - if (get_user(val, va)) { + + if (!access_ok(VERIFY_READ, va, sizeof(u64))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__get_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } DITOREG(val, MIPSInst_RT(ir)); break; } @@ -284,10 +304,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) MIPS_FPU_EMU_INC_STATS(stores); DIFROMREG(val, MIPSInst_RT(ir)); - if (put_user(val, va)) { + if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__put_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } break; } @@ -297,10 +323,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) u32 val; MIPS_FPU_EMU_INC_STATS(loads); - if (get_user(val, va)) { + if (!access_ok(VERIFY_READ, va, sizeof(u32))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__get_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } SITOREG(val, MIPSInst_RT(ir)); break; } @@ -312,10 +344,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) MIPS_FPU_EMU_INC_STATS(stores); SIFROMREG(val, MIPSInst_RT(ir)); - if (put_user(val, va)) { + if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__put_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } break; } @@ -440,11 +478,18 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) contpc = (xcp->cp0_epc + (MIPSInst_SIMM(ir) << 2)); - if (get_user(ir, - (mips_instruction __user *) xcp->cp0_epc)) { + if (!access_ok(VERIFY_READ, xcp->cp0_epc, + sizeof(mips_instruction))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)xcp->cp0_epc; return SIGBUS; } + if (__get_user(ir, + (mips_instruction __user *) xcp->cp0_epc)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)xcp->cp0_epc; + return SIGSEGV; + } switch (MIPSInst_OPCODE(ir)) { case lwc1_op: @@ -506,9 +551,8 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) #if __mips >= 4 && __mips != 32 case cop1x_op:{ - int sig; - - if ((sig = fpux_emu(xcp, ctx, ir))) + int sig = fpux_emu(xcp, ctx, ir, fault_addr); + if (sig) return sig; break; } @@ -604,7 +648,7 @@ DEF3OP(nmadd, dp, ieee754dp_mul, ieee754dp_add, ieee754dp_neg); DEF3OP(nmsub, dp, ieee754dp_mul, ieee754dp_sub, ieee754dp_neg); static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, - mips_instruction ir) + mips_instruction ir, void *__user *fault_addr) { unsigned rcsr = 0; /* resulting csr */ @@ -624,10 +668,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, xcp->regs[MIPSInst_FT(ir)]); MIPS_FPU_EMU_INC_STATS(loads); - if (get_user(val, va)) { + if (!access_ok(VERIFY_READ, va, sizeof(u32))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__get_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } SITOREG(val, MIPSInst_FD(ir)); break; @@ -638,10 +688,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, MIPS_FPU_EMU_INC_STATS(stores); SIFROMREG(val, MIPSInst_FS(ir)); - if (put_user(val, va)) { + if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (put_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } break; case madd_s_op: @@ -701,10 +757,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, xcp->regs[MIPSInst_FT(ir)]); MIPS_FPU_EMU_INC_STATS(loads); - if (get_user(val, va)) { + if (!access_ok(VERIFY_READ, va, sizeof(u64))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__get_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } DITOREG(val, MIPSInst_FD(ir)); break; @@ -714,10 +776,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, MIPS_FPU_EMU_INC_STATS(stores); DIFROMREG(val, MIPSInst_FS(ir)); - if (put_user(val, va)) { + if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__put_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } break; case madd_d_op: @@ -1242,7 +1310,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, } int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, - int has_fpu) + int has_fpu, void *__user *fault_addr) { unsigned long oldepc, prevepc; mips_instruction insn; @@ -1252,10 +1320,16 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, do { prevepc = xcp->cp0_epc; - if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) { + if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)xcp->cp0_epc; return SIGBUS; } + if (__get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)xcp->cp0_epc; + return SIGSEGV; + } if (insn == 0) xcp->cp0_epc += 4; /* skip nops */ else { @@ -1267,7 +1341,7 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, */ /* convert to ieee library modes */ ieee754_csr.rm = ieee_rm[ieee754_csr.rm]; - sig = cop1Emulate(xcp, ctx); + sig = cop1Emulate(xcp, ctx, fault_addr); /* revert to mips rounding mode */ ieee754_csr.rm = mips_rm[ieee754_csr.rm]; } -- cgit v1.2.3 From e5674ad6ca9f1020c2bcc009a55becba3c30d8a3 Mon Sep 17 00:00:00 2001 From: Tony Wu Date: Wed, 10 Nov 2010 21:48:15 +0800 Subject: MIPS: Separate two consecutive loads in memset.S partial_fixup is used in noreorder block. Separating two consecutive loads can save one cycle on processors with GPR intrelock and can fix load-use on processors that need a load delay slot. Also do so for fwd_fixup. [Ralf: Only R2000/R3000 class processors are lacking the the load-user interlock and even some of those got it retrofitted. With R2000/R3000 being fairly uncommon these days the impact of this bug should be minor.] Signed-off-by: Tony Wu To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1768/ Signed-off-by: Ralf Baechle --- arch/mips/lib/memset.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S index 77dc3b20110a..606c8a9efe3b 100644 --- a/arch/mips/lib/memset.S +++ b/arch/mips/lib/memset.S @@ -161,16 +161,16 @@ FEXPORT(__bzero) .Lfwd_fixup: PTR_L t0, TI_TASK($28) - LONG_L t0, THREAD_BUADDR(t0) andi a2, 0x3f + LONG_L t0, THREAD_BUADDR(t0) LONG_ADDU a2, t1 jr ra LONG_SUBU a2, t0 .Lpartial_fixup: PTR_L t0, TI_TASK($28) - LONG_L t0, THREAD_BUADDR(t0) andi a2, LONGMASK + LONG_L t0, THREAD_BUADDR(t0) LONG_ADDU a2, t1 jr ra LONG_SUBU a2, t0 -- cgit v1.2.3 From 4afdea81821880d0fc35e6c7ff54eeed9ec0614d Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 11 Nov 2010 19:08:52 +0100 Subject: MIPS: JZ4740: Fix pcm device name As part the ASoC multi-component patch (commit f0fba2ad) the jz4740 pcm driver was renamed to 'jz4740-pcm-audio'. Adjust the device name accordingly. Signed-off-by: Lars-Peter Clausen Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1770/ Signed-off-by: Ralf Baechle --- arch/mips/jz4740/platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c index 95bc2b5b14f1..1cc9e544d16b 100644 --- a/arch/mips/jz4740/platform.c +++ b/arch/mips/jz4740/platform.c @@ -208,7 +208,7 @@ struct platform_device jz4740_i2s_device = { /* PCM */ struct platform_device jz4740_pcm_device = { - .name = "jz4740-pcm", + .name = "jz4740-pcm-audio", .id = -1, }; -- cgit v1.2.3 From 190fca3e40a65303eac35ac4fbae4f1f1342431c Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Tue, 23 Nov 2010 10:26:45 -0800 Subject: MIPS: Fix regression on BCM4710 processor detection BCM4710 uses the BMIPS32 core (like BCM6345), not the MIPS 4Kc core as was previously believed. Signed-off-by: Kevin Cernekee Tested-by: Alexandros C. Couloumbis Patchwork: https://patchwork.linux-mips.org/patch/1837/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/cpu.h | 4 ++-- arch/mips/kernel/cpu-probe.c | 7 ++----- 2 files changed, 4 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 06d59dcbe243..86877539c6e8 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -111,8 +111,8 @@ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM */ -#define PRID_IMP_BMIPS4KC 0x4000 -#define PRID_IMP_BMIPS32 0x8000 +#define PRID_IMP_BMIPS32_REV4 0x4000 +#define PRID_IMP_BMIPS32_REV8 0x8000 #define PRID_IMP_BMIPS3300 0x9000 #define PRID_IMP_BMIPS3300_ALT 0x9100 #define PRID_IMP_BMIPS3300_BUG 0x0000 diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 71620e19827a..68dae7b6b5db 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -905,7 +905,8 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); switch (c->processor_id & 0xff00) { - case PRID_IMP_BMIPS32: + case PRID_IMP_BMIPS32_REV4: + case PRID_IMP_BMIPS32_REV8: c->cputype = CPU_BMIPS32; __cpu_name[cpu] = "Broadcom BMIPS32"; break; @@ -933,10 +934,6 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "Broadcom BMIPS5000"; c->options |= MIPS_CPU_ULRI; break; - case PRID_IMP_BMIPS4KC: - c->cputype = CPU_4KC; - __cpu_name[cpu] = "MIPS 4Kc"; - break; } } -- cgit v1.2.3 From 5878fc936aebf592cca418ca50773cd578f7daf4 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Tue, 23 Nov 2010 10:26:44 -0800 Subject: MIPS: Fix CP0 COUNTER clockevent race Consider the following test case: write_c0_compare(read_c0_count()); Even if the counter doesn't increment during execution, this might not generate an interrupt until the counter wraps around. The CPU may perform the comparison each time CP0 COUNT increments, not when CP0 COMPARE is written. If mips_next_event() is called with a very small delta, and CP0 COUNT increments during the calculation of "cnt += delta", it is possible that CP0 COMPARE will be written with the current value of CP0 COUNT. If this is detected, the function should return -ETIME, to indicate that the interrupt might not have actually gotten scheduled. Signed-off-by: Kevin Cernekee Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1836/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/cevt-r4k.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 2f4d7a99bcc2..98c5a9737c14 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -32,7 +32,7 @@ static int mips_next_event(unsigned long delta, cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); - res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; + res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0; return res; } -- cgit v1.2.3 From e31fee7c3a197d88d1d0ced0e8600386da27fec4 Mon Sep 17 00:00:00 2001 From: Thomas Chou Date: Wed, 24 Nov 2010 15:35:48 +0800 Subject: MIPS: FDT size is a be32 The totalsize field was be32. And the reserve bootmem would cause failure. Signed-off-by: Thomas Chou To: devicetree-discuss@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: David Daney Cc: Dezhong Diao Patchwork: https://patchwork.linux-mips.org/patch/1838/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/prom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c index e000b278f024..9dbe58368953 100644 --- a/arch/mips/kernel/prom.c +++ b/arch/mips/kernel/prom.c @@ -100,7 +100,7 @@ void __init device_tree_init(void) return; base = virt_to_phys((void *)initial_boot_params); - size = initial_boot_params->totalsize; + size = be32_to_cpu(initial_boot_params->totalsize); /* Before we do anything, lets reserve the dt blob */ reserve_mem_mach(base, size); -- cgit v1.2.3 From 825710843640dd173bc4b2ea99f1296923e4aa06 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 27 Nov 2010 17:45:58 +0100 Subject: MIPS: BCM47xx: Do not read config from CFE The config options read out here are not stored in CFE but only in NVRAM on the devices. Remove reading from CFE and only access the NVRAM. Reading out CFE does not harm but is useless here. Signed-off-by: Hauke Mehrtens To: linux-mips@linux-mips.org Cc: Hauke Mehrtens Patchwork: https://patchwork.linux-mips.org/patch/1845/ Signed-off-by: Ralf Baechle --- arch/mips/bcm47xx/setup.c | 28 +++++++++------------------- 1 file changed, 9 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index b1aee33efd11..2c6bdade3f13 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -32,7 +32,6 @@ #include #include #include -#include #include struct ssb_bus ssb_bcm47xx; @@ -82,42 +81,33 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus, /* Fill boardinfo structure */ memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo)); - if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 || - nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0) + if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0) iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); - if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 || - nvram_getenv("boardtype", buf, sizeof(buf)) >= 0) + if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0) iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); - if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 || - nvram_getenv("boardrev", buf, sizeof(buf)) >= 0) + if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0) iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0); /* Fill sprom structure */ memset(&(iv->sprom), 0, sizeof(struct ssb_sprom)); iv->sprom.revision = 3; - if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 || - nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0) + if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0) str2eaddr(buf, iv->sprom.et0mac); - if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 || - nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0) + if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0) str2eaddr(buf, iv->sprom.et1mac); - if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 || - nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0) + if (nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0) iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0); - if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 || - nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0) + if (nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0) iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0); - if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 || - nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0) + if (nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0) iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10); - if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 || - nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0) + if (nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0) iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10); return 0; -- cgit v1.2.3 From 2aa088d6fd8a6c6e6020ea46b70141f0b7ccf5d2 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 27 Nov 2010 17:45:59 +0100 Subject: MIPS: BCM47xx: Fill values for b43 into SSB sprom Fill the sprom with all available values from the nvram. Most of these new values are needed for the b43 or b43legacy driver. Parts of this patch have been in OpenWRT for a long time and were written by Michael Buesch. Signed-off-by: Hauke Mehrtens To: linux-mips@linux-mips.org Cc: Hauke Mehrtens Patchwork: https://patchwork.linux-mips.org/patch/1846/ Signed-off-by: Ralf Baechle --- arch/mips/bcm47xx/setup.c | 114 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 92 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index 2c6bdade3f13..1f61dfd71ac7 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -73,42 +73,112 @@ static void str2eaddr(char *str, char *dest) } } +#define READ_FROM_NVRAM(_outvar, name, buf) \ + if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\ + sprom->_outvar = simple_strtoul(buf, NULL, 0); + +static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) +{ + char buf[100]; + u32 boardflags; + + memset(sprom, 0, sizeof(struct ssb_sprom)); + + sprom->revision = 1; /* Fallback: Old hardware does not define this. */ + READ_FROM_NVRAM(revision, "sromrev", buf); + if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0) + str2eaddr(buf, sprom->il0mac); + if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0) + str2eaddr(buf, sprom->et0mac); + if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0) + str2eaddr(buf, sprom->et1mac); + READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf); + READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf); + READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf); + READ_FROM_NVRAM(et1mdcport, "et1mdcport", buf); + READ_FROM_NVRAM(board_rev, "boardrev", buf); + READ_FROM_NVRAM(country_code, "ccode", buf); + READ_FROM_NVRAM(ant_available_a, "aa5g", buf); + READ_FROM_NVRAM(ant_available_bg, "aa2g", buf); + READ_FROM_NVRAM(pa0b0, "pa0b0", buf); + READ_FROM_NVRAM(pa0b1, "pa0b1", buf); + READ_FROM_NVRAM(pa0b2, "pa0b2", buf); + READ_FROM_NVRAM(pa1b0, "pa1b0", buf); + READ_FROM_NVRAM(pa1b1, "pa1b1", buf); + READ_FROM_NVRAM(pa1b2, "pa1b2", buf); + READ_FROM_NVRAM(pa1lob0, "pa1lob0", buf); + READ_FROM_NVRAM(pa1lob2, "pa1lob1", buf); + READ_FROM_NVRAM(pa1lob1, "pa1lob2", buf); + READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf); + READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf); + READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf); + READ_FROM_NVRAM(gpio0, "wl0gpio0", buf); + READ_FROM_NVRAM(gpio1, "wl0gpio1", buf); + READ_FROM_NVRAM(gpio2, "wl0gpio2", buf); + READ_FROM_NVRAM(gpio3, "wl0gpio3", buf); + READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf); + READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf); + READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf); + READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf); + READ_FROM_NVRAM(itssi_a, "pa1itssit", buf); + READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf); + READ_FROM_NVRAM(tri2g, "tri2g", buf); + READ_FROM_NVRAM(tri5gl, "tri5gl", buf); + READ_FROM_NVRAM(tri5g, "tri5g", buf); + READ_FROM_NVRAM(tri5gh, "tri5gh", buf); + READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf); + READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf); + READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf); + READ_FROM_NVRAM(rssismc2g, "rssismc2g", buf); + READ_FROM_NVRAM(rssismf2g, "rssismf2g", buf); + READ_FROM_NVRAM(bxa2g, "bxa2g", buf); + READ_FROM_NVRAM(rssisav5g, "rssisav5g", buf); + READ_FROM_NVRAM(rssismc5g, "rssismc5g", buf); + READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf); + READ_FROM_NVRAM(bxa5g, "bxa5g", buf); + READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf); + READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf); + READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf); + READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf); + READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf); + + if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) { + boardflags = simple_strtoul(buf, NULL, 0); + if (boardflags) { + sprom->boardflags_lo = (boardflags & 0x0000FFFFU); + sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16; + } + } + if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) { + boardflags = simple_strtoul(buf, NULL, 0); + if (boardflags) { + sprom->boardflags2_lo = (boardflags & 0x0000FFFFU); + sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16; + } + } +} + static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv) { - char buf[100]; + char buf[20]; /* Fill boardinfo structure */ memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo)); if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0) - iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); + iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0); + else + iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM; if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0) iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0) iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0); - /* Fill sprom structure */ - memset(&(iv->sprom), 0, sizeof(struct ssb_sprom)); - iv->sprom.revision = 3; - - if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0) - str2eaddr(buf, iv->sprom.et0mac); - - if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0) - str2eaddr(buf, iv->sprom.et1mac); - - if (nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0) - iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0); - - if (nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0) - iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0); - - if (nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0) - iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10); + bcm47xx_fill_sprom(&iv->sprom); - if (nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0) - iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10); + if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) + iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10); return 0; } -- cgit v1.2.3 From 59833fcf48ee7b7c8a01e590aa7b7212305c3077 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 27 Nov 2010 17:46:00 +0100 Subject: MIPS: BCM47xx: Use sscanf for parsing mac address Instead of writing own function for parsing the mac address we now use sscanf. Signed-off-by: Hauke Mehrtens To: linux-mips@linux-mips.org Cc: Hauke Mehrtens Patchwork: https://patchwork.linux-mips.org/patch/1847/ Signed-off-by: Ralf Baechle --- arch/mips/bcm47xx/setup.c | 23 +++-------------------- arch/mips/include/asm/mach-bcm47xx/nvram.h | 7 +++++++ 2 files changed, 10 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index 1f61dfd71ac7..87a305536604 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -56,23 +56,6 @@ static void bcm47xx_machine_halt(void) cpu_relax(); } -static void str2eaddr(char *str, char *dest) -{ - int i = 0; - - if (str == NULL) { - memset(dest, 0, 6); - return; - } - - for (;;) { - dest[i++] = (char) simple_strtoul(str, NULL, 16); - str += 2; - if (!*str++ || i == 6) - break; - } -} - #define READ_FROM_NVRAM(_outvar, name, buf) \ if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\ sprom->_outvar = simple_strtoul(buf, NULL, 0); @@ -87,11 +70,11 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) sprom->revision = 1; /* Fallback: Old hardware does not define this. */ READ_FROM_NVRAM(revision, "sromrev", buf); if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0) - str2eaddr(buf, sprom->il0mac); + nvram_parse_macaddr(buf, sprom->il0mac); if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0) - str2eaddr(buf, sprom->et0mac); + nvram_parse_macaddr(buf, sprom->et0mac); if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0) - str2eaddr(buf, sprom->et1mac); + nvram_parse_macaddr(buf, sprom->et1mac); READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf); READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf); READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf); diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/nvram.h index c58ebd8bc155..9759588ba3cf 100644 --- a/arch/mips/include/asm/mach-bcm47xx/nvram.h +++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h @@ -12,6 +12,7 @@ #define __NVRAM_H #include +#include struct nvram_header { u32 magic; @@ -36,4 +37,10 @@ struct nvram_header { extern int nvram_getenv(char *name, char *val, size_t val_len); +static inline void nvram_parse_macaddr(char *buf, u8 *macaddr) +{ + sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1], + &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]); +} + #endif -- cgit v1.2.3 From 1690a7f9ab83f5c823f3044275a4a771a059d5bb Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 27 Nov 2010 17:46:01 +0100 Subject: MIPS: BCM47xx: Swap serial console if ttyS1 was specified. Some devices like the Netgear WGT634U are using ttyS1 for default console output. We should switch to that console if it was given in the kernel_args parameters. Signed-off-by: Hauke Mehrtens To: linux-mips@linux-mips.org Cc: Hauke Mehrtens Patchwork: https://patchwork.linux-mips.org/patch/1848/ Signed-off-by: Ralf Baechle --- arch/mips/bcm47xx/setup.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index 87a305536604..c95f90bf734c 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -169,12 +169,28 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus, void __init plat_mem_setup(void) { int err; + char buf[100]; + struct ssb_mipscore *mcore; err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, bcm47xx_get_invariants); if (err) panic("Failed to initialize SSB bus (err %d)\n", err); + mcore = &ssb_bcm47xx.mipscore; + if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) { + if (strstr(buf, "console=ttyS1")) { + struct ssb_serial_port port; + + printk(KERN_DEBUG "Swapping serial ports!\n"); + /* swap serial ports */ + memcpy(&port, &mcore->serial_ports[0], sizeof(port)); + memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], + sizeof(port)); + memcpy(&mcore->serial_ports[1], &port, sizeof(port)); + } + } + _machine_restart = bcm47xx_machine_restart; _machine_halt = bcm47xx_machine_halt; pm_power_off = bcm47xx_machine_halt; -- cgit v1.2.3 From d002aaadf84c081623a0a8502c122d1492fbd47c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 1 Dec 2010 17:33:17 +0000 Subject: MIPS: MT: Fix typo in comment. Signed-off-by: Ralf Baechle --- arch/mips/kernel/smp-mt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index 43e7cdc5ded2..c0e81418ba21 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -153,7 +153,7 @@ static void __cpuinit vsmp_init_secondary(void) { extern int gic_present; - /* This is Malta specific: IPI,performance and timer inetrrupts */ + /* This is Malta specific: IPI,performance and timer interrupts */ if (gic_present) change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 | STATUSF_IP6 | STATUSF_IP7); -- cgit v1.2.3 From a3aad4aaf871045ab1dd9c99be6c1ace881d8eb0 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 9 Dec 2010 19:14:09 +0000 Subject: MIPS: Rename mips_dma_cache_sync back to dma_cache_sync This fixes IP22 and IP28 build errors. Signed-off-by: Ralf Baechle --- arch/mips/mm/dma-default.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 4fc1a0fbe007..21ea14efb837 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -288,7 +288,7 @@ int mips_dma_supported(struct device *dev, u64 mask) return plat_dma_supported(dev, mask); } -void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size, +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction) { BUG_ON(direction == DMA_NONE); @@ -298,6 +298,8 @@ void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size, __dma_sync((unsigned long)vaddr, size, direction); } +EXPORT_SYMBOL(dma_cache_sync); + static struct dma_map_ops mips_default_dma_map_ops = { .alloc_coherent = mips_dma_alloc_coherent, .free_coherent = mips_dma_free_coherent, -- cgit v1.2.3 From cf745a39dcb10ef80c4a2ff38448f57b69d4c4eb Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Mon, 25 Oct 2010 18:44:11 +0200 Subject: MIPS: Alchemy: fix build with SERIAL_8250=n In commit 7d172bfe ("Alchemy: Add UART PM methods") I introduced platform PM methods which call a function of the 8250 driver; this patch works around link failures when the kernel is built without 8250 support. Signed-off-by: Manuel Lauss To: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/1737/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/common/platform.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 3691630931d6..9e7814db3d03 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -27,6 +27,7 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, unsigned int old_state) { +#ifdef CONFIG_SERIAL_8250 switch (state) { case 0: if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) { @@ -49,6 +50,7 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, serial8250_do_pm(port, state, old_state); break; } +#endif } #define PORT(_base, _irq) \ -- cgit v1.2.3 From 82b89152f00f7ad17844d5614d5011e8d7944ac9 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Sun, 10 Oct 2010 10:42:12 +0100 Subject: MIPS: LD/SD o32 macro GAS fix update I am about to commit: http://sourceware.org/ml/binutils/2010-10/msg00033.html that fixes a problem with the LD/SD macro currently implemented by GAS for the o32 ABI in an inconsistent way. This is best illustrated with a simple program, which I'm copying here from the message above for easier reference: $ cat ld.s ld $5,32767($4) ld $5,32768($4) This gets assebled into the following output: $ mips-linux-as -32 -mips3 -o ld.o ld.s $ mips-linux-objdump -d ld.o ld.o: file format elf32-tradbigmips Disassembly of section .text: 00000000 <.text>: 0: dc857fff ld a1,32767(a0) 4: 3c010001 lui at,0x1 8: 00810821 addu at,a0,at c: 8c258000 lw a1,-32768(at) 10: 8c268004 lw a2,-32764(at) ... Oops! The GAS fix makes the macro behave in a consistent way and pairs of LW/SW instructions to be output as appropriate regardless of the size of the offset associated with the address used. The machine instruction is still available, but to reach it macros have to be disabled first. This has a side effect of requiring the use of a machine-addressable memory operand. As some platforms require 64-bit operations for accesses to some I/O registers LD/SD instructions are used in a couple of places in Linux regardless of the ABI selected. Here's a fix for some pieces of code affected I've been able to track down. The fix should be backwards compatible with all supported binutils releases in existence and can be used as a reference for any other places or off-tree code. The use of the "R" constraint guarantees a machine-addressable operand. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1680/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/io.h | 12 ++++++++++-- arch/mips/pmc-sierra/yosemite/py-console.c | 12 ++++++++++-- 2 files changed, 20 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index c98bf514ec7d..5b017f23e243 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -329,10 +329,14 @@ static inline void pfx##write##bwlq(type val, \ "dsrl32 %L0, %L0, 0" "\n\t" \ "dsll32 %M0, %M0, 0" "\n\t" \ "or %L0, %L0, %M0" "\n\t" \ + ".set push" "\n\t" \ + ".set noreorder" "\n\t" \ + ".set nomacro" "\n\t" \ "sd %L0, %2" "\n\t" \ + ".set pop" "\n\t" \ ".set mips0" "\n" \ : "=r" (__tmp) \ - : "0" (__val), "m" (*__mem)); \ + : "0" (__val), "R" (*__mem)); \ if (irq) \ local_irq_restore(__flags); \ } else \ @@ -355,12 +359,16 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ local_irq_save(__flags); \ __asm__ __volatile__( \ ".set mips3" "\t\t# __readq" "\n\t" \ + ".set push" "\n\t" \ + ".set noreorder" "\n\t" \ + ".set nomacro" "\n\t" \ "ld %L0, %1" "\n\t" \ + ".set pop" "\n\t" \ "dsra32 %M0, %L0, 0" "\n\t" \ "sll %L0, %L0, 0" "\n\t" \ ".set mips0" "\n" \ : "=r" (__val) \ - : "m" (*__mem)); \ + : "R" (*__mem)); \ if (irq) \ local_irq_restore(__flags); \ } else { \ diff --git a/arch/mips/pmc-sierra/yosemite/py-console.c b/arch/mips/pmc-sierra/yosemite/py-console.c index b7f1d9c4a8a3..434d7b1a8c6a 100644 --- a/arch/mips/pmc-sierra/yosemite/py-console.c +++ b/arch/mips/pmc-sierra/yosemite/py-console.c @@ -65,11 +65,15 @@ static unsigned char readb_outer_space(unsigned long long phys) __asm__ __volatile__ ( " .set mips3 \n" + " .set push \n" + " .set noreorder \n" + " .set nomacro \n" " ld %0, %1 \n" + " .set pop \n" " lbu %0, (%0) \n" " .set mips0 \n" : "=r" (res) - : "m" (vaddr)); + : "R" (vaddr)); write_c0_status(sr); ssnop_4(); @@ -89,11 +93,15 @@ static void writeb_outer_space(unsigned long long phys, unsigned char c) __asm__ __volatile__ ( " .set mips3 \n" + " .set push \n" + " .set noreorder \n" + " .set nomacro \n" " ld %0, %1 \n" + " .set pop \n" " sb %2, (%0) \n" " .set mips0 \n" : "=&r" (tmp) - : "m" (vaddr), "r" (c)); + : "R" (vaddr), "r" (c)); write_c0_status(sr); ssnop_4(); -- cgit v1.2.3 From c9bace7ca1e2aeb95754ebc92c8f88a9f215691d Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 11 Oct 2010 14:52:45 -0700 Subject: MIPS: Add a CONFIG_FORCE_MAX_ZONEORDER Kconfig option. For huge page support with base page size of 16K or 32K, we have to increase the MAX_ORDER so that huge pages can be allocated. [Ralf: I don't think a user should have to configure obscure constants like this but for the time being this will have to suffice.] Signed-off-by: David Daney To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1685/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 7fc6bd1d3852..0a9b5b8b2a19 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1666,6 +1666,28 @@ config PAGE_SIZE_64KB endchoice +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB + default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB + range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB + default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB + range 11 64 + default "11" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + + The page size is not necessarily 4KB. Keep this in mind + when choosing a value for this option. + config BOARD_SCACHE bool -- cgit v1.2.3