From 28fd2d397bab5c7fb0eed0c20b6766c99ae34a8f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:33 +0000 Subject: [ARM] S3C64XX: Set GPIO pin when select IRQ_EINT type Set the GPIO pin mode to external interrupt when configuring an IRQ_EINT's IRQ type. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/irq-eint.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index 1f7cc0067f5c..5d62f2799ea9 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -14,12 +14,15 @@ #include #include +#include #include #include #include #include +#include +#include #include #include @@ -74,6 +77,7 @@ static void s3c_irq_eint_maskack(unsigned int irq) static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) { int offs = eint_offset(irq); + int pin; int shift; u32 ctrl, mask; u32 newvalue = 0; @@ -125,6 +129,15 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) ctrl |= newvalue << shift; __raw_writel(ctrl, reg); + /* set the GPIO pin appropriately */ + + if (offs < 23) + pin = S3C64XX_GPN(offs); + else + pin = S3C64XX_GPM(offs - 23); + + s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2)); + return 0; } -- cgit v1.2.3 From 789b4ad36c7037758309df98f1efa65d0c26527d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 26 Jan 2009 19:12:01 +0000 Subject: [ARM] S3C64XX: Fix section mismatch for s3c64xx_register_clocks() Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c index 136c982c68e1..ad1b9682c9c3 100644 --- a/arch/arm/plat-s3c64xx/clock.c +++ b/arch/arm/plat-s3c64xx/clock.c @@ -248,7 +248,7 @@ static struct clk *clks[] __initdata = { &clk_48m, }; -void s3c64xx_register_clocks(void) +void __init s3c64xx_register_clocks(void) { struct clk *clkp; int ret; -- cgit v1.2.3 From 778974797793e7dcd42e3701e09c686b6419cb35 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 16:29:41 +0000 Subject: [ARM] SMDK6410: Correct I2C device name for WM8580 The WM8580 driver registers itself as "wm8580" rather than "WM8580". Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 3c4d47145c83..0436783c87d4 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -146,7 +146,7 @@ static struct platform_device *smdk6410_devices[] __initdata = { static struct i2c_board_info i2c_devs0[] __initdata = { { I2C_BOARD_INFO("24c08", 0x50), }, - { I2C_BOARD_INFO("WM8580", 0X1b), }, + { I2C_BOARD_INFO("wm8580", 0x1b), }, }; static struct i2c_board_info i2c_devs1[] __initdata = { -- cgit v1.2.3 From 027191a8c6602d3fb6dde3820517339e1daf191d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 16:29:43 +0000 Subject: [ARM] SMDK6410: Declare iodesc table static Shuts up a warning. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 0436783c87d4..25f7935576f8 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -129,7 +129,7 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = { .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, }; -struct map_desc smdk6410_iodesc[] = {}; +static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { #ifdef CONFIG_SMDK6410_SD_CH0 -- cgit v1.2.3 From 8bd8dbdf3725ce569467bd704840249869f626d6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 16:29:44 +0000 Subject: [ARM] S3C64XX: Staticise s3c64xx_init_irq_eint() It's an initcall and does not need to be exported. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/irq-eint.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index 5d62f2799ea9..8d1b7290aa13 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -194,7 +194,7 @@ static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc) s3c_irq_demux_eint(20, 27); } -int __init s3c64xx_init_irq_eint(void) +static int __init s3c64xx_init_irq_eint(void) { int irq; -- cgit v1.2.3 From 24d4076734b4ecf083a6be611040fe0743e59989 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 17:06:23 +0000 Subject: [ARM] S3C64XX: Do gpiolib configuration earlier arch_initcall() runs after the machine init function which means that any configuration of GPIO pins must currently be done later on, for example in callbacks from drivers. Move the initialisation earlier in order to allow machines to configure GPIOs directly in their init functions rather than having to have a callback invoked later on. Some other ARM platforms use this method. Other solutions for this include providing a special interface for setting up GPIOs en masse, adding callbacks to do the GPIO configuration from devices and doing the GPIO configuration implicitly. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/gpiolib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index cc62941d7b5c..ee9188add8fb 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -417,4 +417,4 @@ static __init int s3c64xx_gpiolib_init(void) return 0; } -arch_initcall(s3c64xx_gpiolib_init); +core_initcall(s3c64xx_gpiolib_init); -- cgit v1.2.3 From 4271c3bd46a0f0448118cf618c7210237a98e6bf Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:00:27 +0000 Subject: [ARM] S3C64XX: Rename IRQ_UHOST to IRQ_USBH The USB OHCI host device expects the IRQ definition to be named IRQ_USBH, so rename the S3C64XX IRQ header to match. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/include/plat/irqs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h index 2846f550b727..f865bf4d709e 100644 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h @@ -117,7 +117,7 @@ #define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12) #define IRQ_NFC S3C64XX_IRQ_VIC1(13) #define IRQ_CFCON S3C64XX_IRQ_VIC1(14) -#define IRQ_UHOST S3C64XX_IRQ_VIC1(15) +#define IRQ_USBH S3C64XX_IRQ_VIC1(15) #define IRQ_SPI0 S3C64XX_IRQ_VIC1(16) #define IRQ_SPI1 S3C64XX_IRQ_VIC1(17) #define IRQ_IIC S3C64XX_IRQ_VIC1(18) -- cgit v1.2.3 From 19c5957081a6ffbf014e6c944e6aafee3c1632c3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:00:33 +0000 Subject: [ARM] S3C64XX: Fix name of USB host clock. The usb-host-bus clock should be named usb-bus-host. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 8d9a0cada668..a2f526bcb389 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -351,7 +351,7 @@ static struct clksrc_clk clk_mmc2 = { static struct clksrc_clk clk_usbhost = { .clk = { - .name = "usb-host-bus", + .name = "usb-bus-host", .id = -1, .ctrlbit = S3C_CLKCON_SCLK_UHOST, .enable = s3c64xx_sclk_ctrl, -- cgit v1.2.3 From 41ba41d7c7e1d2a3c9cdfe16c1ee9f7af4693ae2 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:00:34 +0000 Subject: [ARM] S3C64XX: Fix USB host clock mux list The clock list for the USB host bus clock was in the wrong order, move clk_48m to position 0. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index a2f526bcb389..2984270b40a7 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -189,10 +189,10 @@ static struct clk_sources clkset_uart = { }; static struct clk *clkset_uhost_list[] = { + &clk_48m, &clk_mout_epll.clk, &clk_dout_mpll, &clk_fin_epll, - &clk_48m, }; static struct clk_sources clkset_uhost = { -- cgit v1.2.3 From 3782d3605522b836f53c6d11f76abf5404425c1b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 27 Feb 2009 11:25:37 +0000 Subject: [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/s3c6400-clock.c Fix the following sparse warnings in s3c6400-clock.c: 39:12: warning: symbol 'clk_ext_xtal_mux' was not declared. Should it be static? 66:12: warning: symbol 'clk_fout_apll' was not declared. Should it be static? 81:19: warning: symbol 'clk_mout_apll' was not declared. Should it be static? 91:12: warning: symbol 'clk_fout_epll' was not declared. Should it be static? 106:19: warning: symbol 'clk_mout_epll' was not declared. Should it be static? 126:19: warning: symbol 'clk_mout_mpll' was not declared. Should it be static? 148:12: warning: symbol 'clk_dout_mpll' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 2984270b40a7..6edbeef6aa9d 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -36,7 +36,7 @@ * ext_xtal_mux for want of an actual name from the manual. */ -struct clk clk_ext_xtal_mux = { +static struct clk clk_ext_xtal_mux = { .name = "ext_xtal", .id = -1, }; @@ -63,7 +63,7 @@ struct clksrc_clk { void __iomem *reg_divider; }; -struct clk clk_fout_apll = { +static struct clk clk_fout_apll = { .name = "fout_apll", .id = -1, }; @@ -78,7 +78,7 @@ static struct clk_sources clk_src_apll = { .nr_sources = ARRAY_SIZE(clk_src_apll_list), }; -struct clksrc_clk clk_mout_apll = { +static struct clksrc_clk clk_mout_apll = { .clk = { .name = "mout_apll", .id = -1, @@ -88,7 +88,7 @@ struct clksrc_clk clk_mout_apll = { .sources = &clk_src_apll, }; -struct clk clk_fout_epll = { +static struct clk clk_fout_epll = { .name = "fout_epll", .id = -1, }; @@ -103,7 +103,7 @@ static struct clk_sources clk_src_epll = { .nr_sources = ARRAY_SIZE(clk_src_epll_list), }; -struct clksrc_clk clk_mout_epll = { +static struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", .id = -1, @@ -123,7 +123,7 @@ static struct clk_sources clk_src_mpll = { .nr_sources = ARRAY_SIZE(clk_src_mpll_list), }; -struct clksrc_clk clk_mout_mpll = { +static struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", .id = -1, @@ -145,7 +145,7 @@ static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) return rate; } -struct clk clk_dout_mpll = { +static struct clk clk_dout_mpll = { .name = "dout_mpll", .id = -1, .parent = &clk_mout_mpll.clk, -- cgit v1.2.3 From fdca9bf2dae14218704ddd7dc60ad1b198c1d787 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 27 Feb 2009 11:29:23 +0000 Subject: [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/irq.c Fix the following sparse warnings in arch/arm/plat-s3c64xx/irq.c arch/arm/plat-s3c64xx/irq.c:210:23: warning: incorrect type in initializer (different address spaces) arch/arm/plat-s3c64xx/irq.c:210:23: expected void *reg_base arch/arm/plat-s3c64xx/irq.c:210:23: got void [noderef] *regs arch/arm/plat-s3c64xx/irq.c:215:2: warning: incorrect type in argument 1 (different address spaces) arch/arm/plat-s3c64xx/irq.c:215:2: expected void const volatile [noderef] * arch/arm/plat-s3c64xx/irq.c:215:2: got void * Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c index a94f1d5e819d..f22edf7c2d2d 100644 --- a/arch/arm/plat-s3c64xx/irq.c +++ b/arch/arm/plat-s3c64xx/irq.c @@ -207,7 +207,7 @@ static struct irq_chip s3c_irq_uart = { static void __init s3c64xx_uart_irq(struct uart_irq *uirq) { - void *reg_base = uirq->regs; + void __iomem *reg_base = uirq->regs; unsigned int irq; int offs; -- cgit v1.2.3 From efeff568677aa325f84d3ce37c219019887a79eb Mon Sep 17 00:00:00 2001 From: Werner Almesberger Date: Fri, 27 Feb 2009 08:03:07 -0300 Subject: [ARM] S3C64XX: Fix s3c64xx_setrate_clksrc Some of the rate selection logic in s3c64xx_setrate_clksrc uses what appears to be parent clock selection logic. This patch corrects it. I also added a check for overly large dividers to prevent them from changing unrelated clocks. Signed-off-by: Werner Almesberger Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 6edbeef6aa9d..05b17528041e 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -239,10 +239,12 @@ static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate) rate = clk_round_rate(clk, rate); div = clk_get_rate(clk->parent) / rate; + if (div > 16) + return -EINVAL; val = __raw_readl(reg); - val &= ~sclk->mask; - val |= (rate - 1) << sclk->shift; + val &= ~(0xf << sclk->shift); + val |= (div - 1) << sclk->shift; __raw_writel(val, reg); return 0; -- cgit v1.2.3