From ac242e2cfd14f5be99fc2e6888702d02099d2f91 Mon Sep 17 00:00:00 2001
From: Brian Masney <masneyb@onstation.org>
Date: Sun, 6 Oct 2019 21:45:07 -0400
Subject: ARM: dts: qcom: pm8941: add 5vs2 regulator node
pm8941 is missing the 5vs2 regulator node so let's add it since its
needed to get the external display working. This regulator was already
configured in the interrupts property on the parent node.
Note that this regulator is referred to as mvs2 in the downstream MSM
kernel sources.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm/boot/dts/qcom-pm8941.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
(limited to 'arch')
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index f198480c8ef4..c1f2012d1c8b 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -178,6 +178,16 @@
qcom,vs-soft-start-strength = <0>;
regulator-initial-mode = <1>;
};
+
+ pm8941_5vs2: 5vs2 {
+ regulator-enable-ramp-delay = <1000>;
+ regulator-pull-down;
+ regulator-over-current-protection;
+ qcom,ocp-max-retries = <10>;
+ qcom,ocp-retry-delay = <30>;
+ qcom,vs-soft-start-strength = <0>;
+ regulator-initial-mode = <1>;
+ };
};
};
};
--
cgit v1.2.3