From 7ff55d174cbfdd06245c20a7488da4e9499cfd11 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Tue, 23 Aug 2016 11:33:26 +0300 Subject: ACPI / APD: Provide build-in properties of the UART The UART driver, dw8250.c, needs some details regarding the Designware UART. For ACPI enumerated devices the values are hard-coded, but since the driver also reads the values from device properties, providing them with build-in properties. This allows us to later remove the hard-coded values from the driver. Signed-off-by: Heikki Krogerus Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_apd.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers/acpi') diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c index 1daf9c46df8e..5f112d811e42 100644 --- a/drivers/acpi/acpi_apd.c +++ b/drivers/acpi/acpi_apd.c @@ -42,6 +42,7 @@ struct apd_private_data; struct apd_device_desc { unsigned int flags; unsigned int fixed_clk_rate; + struct property_entry *properties; int (*setup)(struct apd_private_data *pdata); }; @@ -76,9 +77,17 @@ static struct apd_device_desc cz_i2c_desc = { .fixed_clk_rate = 133000000, }; +static struct property_entry uart_properties[] = { + PROPERTY_ENTRY_U32("reg-io-width", 4), + PROPERTY_ENTRY_U32("reg-shift", 2), + PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"), + { }, +}; + static struct apd_device_desc cz_uart_desc = { .setup = acpi_apd_setup, .fixed_clk_rate = 48000000, + .properties = uart_properties, }; #endif @@ -125,6 +134,12 @@ static int acpi_apd_create_device(struct acpi_device *adev, goto err_out; } + if (dev_desc->properties) { + ret = device_add_properties(&adev->dev, dev_desc->properties); + if (ret) + goto err_out; + } + adev->driver_data = pdata; pdev = acpi_create_platform_device(adev); if (!IS_ERR_OR_NULL(pdev)) -- cgit v1.2.3 From a5565cf238daa6b1d5a260d844f857176d280886 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Tue, 23 Aug 2016 11:33:27 +0300 Subject: ACPI / LPSS: Provide build-in properties of the UART The UART driver, dw8250.c, needs some details regarding the Designware UART. For ACPI enumerated devices the values are hard-coded, but since the driver also reads the values from device properties, providing them with build-in properties. This allows us to later remove the hard-coded values from the driver. Signed-off-by: Heikki Krogerus Acked-by: Mika Westerberg Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_lpss.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers/acpi') diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 357a0b8f860b..552010288135 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -75,6 +75,7 @@ struct lpss_device_desc { const char *clk_con_id; unsigned int prv_offset; size_t prv_size_override; + struct property_entry *properties; void (*setup)(struct lpss_private_data *pdata); }; @@ -163,11 +164,19 @@ static const struct lpss_device_desc lpt_i2c_dev_desc = { .prv_offset = 0x800, }; +static struct property_entry uart_properties[] = { + PROPERTY_ENTRY_U32("reg-io-width", 4), + PROPERTY_ENTRY_U32("reg-shift", 2), + PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"), + { }, +}; + static const struct lpss_device_desc lpt_uart_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR, .clk_con_id = "baudclk", .prv_offset = 0x800, .setup = lpss_uart_setup, + .properties = uart_properties, }; static const struct lpss_device_desc lpt_sdio_dev_desc = { @@ -189,6 +198,7 @@ static const struct lpss_device_desc byt_uart_dev_desc = { .clk_con_id = "baudclk", .prv_offset = 0x800, .setup = lpss_uart_setup, + .properties = uart_properties, }; static const struct lpss_device_desc bsw_uart_dev_desc = { @@ -197,6 +207,7 @@ static const struct lpss_device_desc bsw_uart_dev_desc = { .clk_con_id = "baudclk", .prv_offset = 0x800, .setup = lpss_uart_setup, + .properties = uart_properties, }; static const struct lpss_device_desc byt_spi_dev_desc = { @@ -440,6 +451,12 @@ static int acpi_lpss_create_device(struct acpi_device *adev, goto err_out; } + if (dev_desc->properties) { + ret = device_add_properties(&adev->dev, dev_desc->properties); + if (ret) + goto err_out; + } + adev->driver_data = pdata; pdev = acpi_create_platform_device(adev); if (!IS_ERR_OR_NULL(pdev)) { -- cgit v1.2.3