From 9a74ccdbbb8fa6302ae1ba606f2ef0c03d3242ab Mon Sep 17 00:00:00 2001
From: Philipp Zabel
Date: Fri, 13 Feb 2015 20:18:52 +0100
Subject: clk: Add PWM clock driver
Some board designers, when running out of clock output pads, decide to
(mis)use PWM output pads to provide a clock to external components.
This driver supports this practice by providing an adapter between the
PWM and clock bindings in the device tree. As the PWM bindings specify
the period in the device tree, this is a fixed clock.
Tested-by: Janusz Uzycki
Signed-off-by: Philipp Zabel
Signed-off-by: Michael Turquette
---
drivers/clk/Kconfig | 7 +++++++
1 file changed, 7 insertions(+)
(limited to 'drivers/clk/Kconfig')
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 0b474a04730f..9897f353bf1a 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -130,6 +130,13 @@ config COMMON_CLK_PALMAS
This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
using common clock framework.
+config COMMON_CLK_PWM
+ tristate "Clock driver for PWMs used as clock outputs"
+ depends on PWM
+ ---help---
+ Adapter driver so that any PWM output can be (mis)used as clock signal
+ at 50% duty cycle.
+
config COMMON_CLK_PXA
def_bool COMMON_CLK && ARCH_PXA
---help---
--
cgit v1.2.3