From be943c7d27b14dbd700770d2fd6c704be95a0ec9 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 14 Oct 2013 17:52:38 +0200 Subject: crypto: atmel-aes - add support for Device Tree Add support for Device Tree and use of the DMA DT API to get the needed channels. Documentation is added for these DT nodes. Initial code by: Nicolas Royer and Eukrea. Signed-off-by: Nicolas Ferre Acked-by: Herbert Xu --- drivers/crypto/atmel-aes.c | 143 +++++++++++++++++++++++++++++---------------- 1 file changed, 94 insertions(+), 49 deletions(-) (limited to 'drivers/crypto') diff --git a/drivers/crypto/atmel-aes.c b/drivers/crypto/atmel-aes.c index c1efd910d97b..d7c9e317423c 100644 --- a/drivers/crypto/atmel-aes.c +++ b/drivers/crypto/atmel-aes.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -39,6 +40,7 @@ #include #include #include +#include #include "atmel-aes-regs.h" #define CFB8_BLOCK_SIZE 1 @@ -747,59 +749,50 @@ static int atmel_aes_dma_init(struct atmel_aes_dev *dd, struct crypto_platform_data *pdata) { int err = -ENOMEM; - dma_cap_mask_t mask_in, mask_out; + dma_cap_mask_t mask; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* Try to grab 2 DMA channels */ + dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask, + atmel_aes_filter, &pdata->dma_slave->rxdata, dd->dev, "tx"); + if (!dd->dma_lch_in.chan) + goto err_dma_in; + + dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV; + dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base + + AES_IDATAR(0); + dd->dma_lch_in.dma_conf.src_maxburst = dd->caps.max_burst_size; + dd->dma_lch_in.dma_conf.src_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_in.dma_conf.dst_maxburst = dd->caps.max_burst_size; + dd->dma_lch_in.dma_conf.dst_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_in.dma_conf.device_fc = false; + + dd->dma_lch_out.chan = dma_request_slave_channel_compat(mask, + atmel_aes_filter, &pdata->dma_slave->txdata, dd->dev, "rx"); + if (!dd->dma_lch_out.chan) + goto err_dma_out; + + dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM; + dd->dma_lch_out.dma_conf.src_addr = dd->phys_base + + AES_ODATAR(0); + dd->dma_lch_out.dma_conf.src_maxburst = dd->caps.max_burst_size; + dd->dma_lch_out.dma_conf.src_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_out.dma_conf.dst_maxburst = dd->caps.max_burst_size; + dd->dma_lch_out.dma_conf.dst_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_out.dma_conf.device_fc = false; - if (pdata && pdata->dma_slave->txdata.dma_dev && - pdata->dma_slave->rxdata.dma_dev) { - - /* Try to grab 2 DMA channels */ - dma_cap_zero(mask_in); - dma_cap_set(DMA_SLAVE, mask_in); - - dd->dma_lch_in.chan = dma_request_channel(mask_in, - atmel_aes_filter, &pdata->dma_slave->rxdata); - - if (!dd->dma_lch_in.chan) - goto err_dma_in; - - dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV; - dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base + - AES_IDATAR(0); - dd->dma_lch_in.dma_conf.src_maxburst = dd->caps.max_burst_size; - dd->dma_lch_in.dma_conf.src_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_in.dma_conf.dst_maxburst = dd->caps.max_burst_size; - dd->dma_lch_in.dma_conf.dst_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_in.dma_conf.device_fc = false; - - dma_cap_zero(mask_out); - dma_cap_set(DMA_SLAVE, mask_out); - dd->dma_lch_out.chan = dma_request_channel(mask_out, - atmel_aes_filter, &pdata->dma_slave->txdata); - - if (!dd->dma_lch_out.chan) - goto err_dma_out; - - dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM; - dd->dma_lch_out.dma_conf.src_addr = dd->phys_base + - AES_ODATAR(0); - dd->dma_lch_out.dma_conf.src_maxburst = dd->caps.max_burst_size; - dd->dma_lch_out.dma_conf.src_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_out.dma_conf.dst_maxburst = dd->caps.max_burst_size; - dd->dma_lch_out.dma_conf.dst_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_out.dma_conf.device_fc = false; - - return 0; - } else { - return -ENODEV; - } + return 0; err_dma_out: dma_release_channel(dd->dma_lch_in.chan); err_dma_in: + dev_warn(dd->dev, "no DMA channel available\n"); return err; } @@ -1261,6 +1254,47 @@ static void atmel_aes_get_cap(struct atmel_aes_dev *dd) } } +#if defined(CONFIG_OF) +static const struct of_device_id atmel_aes_dt_ids[] = { + { .compatible = "atmel,at91sam9g46-aes" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, atmel_aes_dt_ids); + +static struct crypto_platform_data *atmel_aes_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct crypto_platform_data *pdata; + + if (!np) { + dev_err(&pdev->dev, "device node not found\n"); + return ERR_PTR(-EINVAL); + } + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, "could not allocate memory for pdata\n"); + return ERR_PTR(-ENOMEM); + } + + pdata->dma_slave = devm_kzalloc(&pdev->dev, + sizeof(*(pdata->dma_slave)), + GFP_KERNEL); + if (!pdata->dma_slave) { + dev_err(&pdev->dev, "could not allocate memory for dma_slave\n"); + devm_kfree(&pdev->dev, pdata); + return ERR_PTR(-ENOMEM); + } + + return pdata; +} +#else +static inline struct crypto_platform_data *atmel_aes_of_init(struct platform_device *pdev) +{ + return ERR_PTR(-EINVAL); +} +#endif + static int atmel_aes_probe(struct platform_device *pdev) { struct atmel_aes_dev *aes_dd; @@ -1272,6 +1306,14 @@ static int atmel_aes_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (!pdata) { + pdata = atmel_aes_of_init(pdev); + if (IS_ERR(pdata)) { + err = PTR_ERR(pdata); + goto aes_dd_err; + } + } + + if (!pdata->dma_slave) { err = -ENXIO; goto aes_dd_err; } @@ -1358,7 +1400,9 @@ static int atmel_aes_probe(struct platform_device *pdev) if (err) goto err_algs; - dev_info(dev, "Atmel AES\n"); + dev_info(dev, "Atmel AES - Using %s, %s for DMA transfers\n", + dma_chan_name(aes_dd->dma_lch_in.chan), + dma_chan_name(aes_dd->dma_lch_out.chan)); return 0; @@ -1424,6 +1468,7 @@ static struct platform_driver atmel_aes_driver = { .driver = { .name = "atmel_aes", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(atmel_aes_dt_ids), }, }; -- cgit v1.2.3 From 84c8976b643af63150072e6c3e5f156dd6f9c910 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 15 Oct 2013 12:14:58 +0200 Subject: crypto: atmel-tdes - add support for Device Tree Add support for Device Tree and use of the DMA DT API to get the channels if needed. Documentation is added for these DT nodes. Initial code by: Nicolas Royer and Eukrea. Signed-off-by: Nicolas Ferre Acked-by: Herbert Xu --- drivers/crypto/atmel-tdes.c | 143 +++++++++++++++++++++++++++++--------------- 1 file changed, 94 insertions(+), 49 deletions(-) (limited to 'drivers/crypto') diff --git a/drivers/crypto/atmel-tdes.c b/drivers/crypto/atmel-tdes.c index 4a99564a08e6..6cde5b530c69 100644 --- a/drivers/crypto/atmel-tdes.c +++ b/drivers/crypto/atmel-tdes.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -716,59 +717,50 @@ static int atmel_tdes_dma_init(struct atmel_tdes_dev *dd, struct crypto_platform_data *pdata) { int err = -ENOMEM; - dma_cap_mask_t mask_in, mask_out; + dma_cap_mask_t mask; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* Try to grab 2 DMA channels */ + dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask, + atmel_tdes_filter, &pdata->dma_slave->rxdata, dd->dev, "tx"); + if (!dd->dma_lch_in.chan) + goto err_dma_in; + + dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV; + dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base + + TDES_IDATA1R; + dd->dma_lch_in.dma_conf.src_maxburst = 1; + dd->dma_lch_in.dma_conf.src_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_in.dma_conf.dst_maxburst = 1; + dd->dma_lch_in.dma_conf.dst_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_in.dma_conf.device_fc = false; + + dd->dma_lch_out.chan = dma_request_slave_channel_compat(mask, + atmel_tdes_filter, &pdata->dma_slave->txdata, dd->dev, "rx"); + if (!dd->dma_lch_out.chan) + goto err_dma_out; + + dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM; + dd->dma_lch_out.dma_conf.src_addr = dd->phys_base + + TDES_ODATA1R; + dd->dma_lch_out.dma_conf.src_maxburst = 1; + dd->dma_lch_out.dma_conf.src_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_out.dma_conf.dst_maxburst = 1; + dd->dma_lch_out.dma_conf.dst_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_out.dma_conf.device_fc = false; - if (pdata && pdata->dma_slave->txdata.dma_dev && - pdata->dma_slave->rxdata.dma_dev) { - - /* Try to grab 2 DMA channels */ - dma_cap_zero(mask_in); - dma_cap_set(DMA_SLAVE, mask_in); - - dd->dma_lch_in.chan = dma_request_channel(mask_in, - atmel_tdes_filter, &pdata->dma_slave->rxdata); - - if (!dd->dma_lch_in.chan) - goto err_dma_in; - - dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV; - dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base + - TDES_IDATA1R; - dd->dma_lch_in.dma_conf.src_maxburst = 1; - dd->dma_lch_in.dma_conf.src_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_in.dma_conf.dst_maxburst = 1; - dd->dma_lch_in.dma_conf.dst_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_in.dma_conf.device_fc = false; - - dma_cap_zero(mask_out); - dma_cap_set(DMA_SLAVE, mask_out); - dd->dma_lch_out.chan = dma_request_channel(mask_out, - atmel_tdes_filter, &pdata->dma_slave->txdata); - - if (!dd->dma_lch_out.chan) - goto err_dma_out; - - dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM; - dd->dma_lch_out.dma_conf.src_addr = dd->phys_base + - TDES_ODATA1R; - dd->dma_lch_out.dma_conf.src_maxburst = 1; - dd->dma_lch_out.dma_conf.src_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_out.dma_conf.dst_maxburst = 1; - dd->dma_lch_out.dma_conf.dst_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_out.dma_conf.device_fc = false; - - return 0; - } else { - return -ENODEV; - } + return 0; err_dma_out: dma_release_channel(dd->dma_lch_in.chan); err_dma_in: + dev_warn(dd->dev, "no DMA channel available\n"); return err; } @@ -1317,6 +1309,47 @@ static void atmel_tdes_get_cap(struct atmel_tdes_dev *dd) } } +#if defined(CONFIG_OF) +static const struct of_device_id atmel_tdes_dt_ids[] = { + { .compatible = "atmel,at91sam9g46-tdes" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, atmel_tdes_dt_ids); + +static struct crypto_platform_data *atmel_tdes_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct crypto_platform_data *pdata; + + if (!np) { + dev_err(&pdev->dev, "device node not found\n"); + return ERR_PTR(-EINVAL); + } + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, "could not allocate memory for pdata\n"); + return ERR_PTR(-ENOMEM); + } + + pdata->dma_slave = devm_kzalloc(&pdev->dev, + sizeof(*(pdata->dma_slave)), + GFP_KERNEL); + if (!pdata->dma_slave) { + dev_err(&pdev->dev, "could not allocate memory for dma_slave\n"); + devm_kfree(&pdev->dev, pdata); + return ERR_PTR(-ENOMEM); + } + + return pdata; +} +#else /* CONFIG_OF */ +static inline struct crypto_platform_data *atmel_tdes_of_init(struct platform_device *pdev) +{ + return ERR_PTR(-EINVAL); +} +#endif + static int atmel_tdes_probe(struct platform_device *pdev) { struct atmel_tdes_dev *tdes_dd; @@ -1399,13 +1432,24 @@ static int atmel_tdes_probe(struct platform_device *pdev) if (tdes_dd->caps.has_dma) { pdata = pdev->dev.platform_data; if (!pdata) { - dev_err(&pdev->dev, "platform data not available\n"); + pdata = atmel_tdes_of_init(pdev); + if (IS_ERR(pdata)) { + dev_err(&pdev->dev, "platform data not available\n"); + err = PTR_ERR(pdata); + goto err_pdata; + } + } + if (!pdata->dma_slave) { err = -ENXIO; goto err_pdata; } err = atmel_tdes_dma_init(tdes_dd, pdata); if (err) goto err_tdes_dma; + + dev_info(dev, "using %s, %s for DMA transfers\n", + dma_chan_name(tdes_dd->dma_lch_in.chan), + dma_chan_name(tdes_dd->dma_lch_out.chan)); } spin_lock(&atmel_tdes.lock); @@ -1487,6 +1531,7 @@ static struct platform_driver atmel_tdes_driver = { .driver = { .name = "atmel_tdes", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(atmel_tdes_dt_ids), }, }; -- cgit v1.2.3 From abfe7ae407c44de51f0fec8d87d448c7c27e1285 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 15 Oct 2013 15:36:34 +0200 Subject: crypto: atmel-sha - add support for Device Tree Add support for Device Tree and use of the DMA DT API to get the channels if needed. Documentation is added for these DT nodes. Initial code by: Nicolas Royer and Eukrea. Signed-off-by: Nicolas Ferre Acked-by: Herbert Xu --- drivers/crypto/atmel-sha.c | 99 +++++++++++++++++++++++++++++++++++----------- 1 file changed, 75 insertions(+), 24 deletions(-) (limited to 'drivers/crypto') diff --git a/drivers/crypto/atmel-sha.c b/drivers/crypto/atmel-sha.c index eaed8bf183bc..ecfdf727cc36 100644 --- a/drivers/crypto/atmel-sha.c +++ b/drivers/crypto/atmel-sha.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -1263,32 +1264,29 @@ static int atmel_sha_dma_init(struct atmel_sha_dev *dd, int err = -ENOMEM; dma_cap_mask_t mask_in; - if (pdata && pdata->dma_slave->rxdata.dma_dev) { - /* Try to grab DMA channel */ - dma_cap_zero(mask_in); - dma_cap_set(DMA_SLAVE, mask_in); + /* Try to grab DMA channel */ + dma_cap_zero(mask_in); + dma_cap_set(DMA_SLAVE, mask_in); - dd->dma_lch_in.chan = dma_request_channel(mask_in, - atmel_sha_filter, &pdata->dma_slave->rxdata); - - if (!dd->dma_lch_in.chan) - return err; - - dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV; - dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base + - SHA_REG_DIN(0); - dd->dma_lch_in.dma_conf.src_maxburst = 1; - dd->dma_lch_in.dma_conf.src_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_in.dma_conf.dst_maxburst = 1; - dd->dma_lch_in.dma_conf.dst_addr_width = - DMA_SLAVE_BUSWIDTH_4_BYTES; - dd->dma_lch_in.dma_conf.device_fc = false; - - return 0; + dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask_in, + atmel_sha_filter, &pdata->dma_slave->rxdata, dd->dev, "tx"); + if (!dd->dma_lch_in.chan) { + dev_warn(dd->dev, "no DMA channel available\n"); + return err; } - return -ENODEV; + dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV; + dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base + + SHA_REG_DIN(0); + dd->dma_lch_in.dma_conf.src_maxburst = 1; + dd->dma_lch_in.dma_conf.src_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_in.dma_conf.dst_maxburst = 1; + dd->dma_lch_in.dma_conf.dst_addr_width = + DMA_SLAVE_BUSWIDTH_4_BYTES; + dd->dma_lch_in.dma_conf.device_fc = false; + + return 0; } static void atmel_sha_dma_cleanup(struct atmel_sha_dev *dd) @@ -1326,6 +1324,48 @@ static void atmel_sha_get_cap(struct atmel_sha_dev *dd) } } +#if defined(CONFIG_OF) +static const struct of_device_id atmel_sha_dt_ids[] = { + { .compatible = "atmel,at91sam9g46-sha" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, atmel_sha_dt_ids); + +static struct crypto_platform_data *atmel_sha_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct crypto_platform_data *pdata; + + if (!np) { + dev_err(&pdev->dev, "device node not found\n"); + return ERR_PTR(-EINVAL); + } + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, "could not allocate memory for pdata\n"); + return ERR_PTR(-ENOMEM); + } + + pdata->dma_slave = devm_kzalloc(&pdev->dev, + sizeof(*(pdata->dma_slave)), + GFP_KERNEL); + if (!pdata->dma_slave) { + dev_err(&pdev->dev, "could not allocate memory for dma_slave\n"); + devm_kfree(&pdev->dev, pdata); + return ERR_PTR(-ENOMEM); + } + + return pdata; +} +#else /* CONFIG_OF */ +static inline struct crypto_platform_data *atmel_sha_of_init(struct platform_device *dev) +{ + return ERR_PTR(-EINVAL); +} +#endif + static int atmel_sha_probe(struct platform_device *pdev) { struct atmel_sha_dev *sha_dd; @@ -1402,13 +1442,23 @@ static int atmel_sha_probe(struct platform_device *pdev) if (sha_dd->caps.has_dma) { pdata = pdev->dev.platform_data; if (!pdata) { - dev_err(&pdev->dev, "platform data not available\n"); + pdata = atmel_sha_of_init(pdev); + if (IS_ERR(pdata)) { + dev_err(&pdev->dev, "platform data not available\n"); + err = PTR_ERR(pdata); + goto err_pdata; + } + } + if (!pdata->dma_slave) { err = -ENXIO; goto err_pdata; } err = atmel_sha_dma_init(sha_dd, pdata); if (err) goto err_sha_dma; + + dev_info(dev, "using %s for DMA transfers\n", + dma_chan_name(sha_dd->dma_lch_in.chan)); } spin_lock(&atmel_sha.lock); @@ -1483,6 +1533,7 @@ static struct platform_driver atmel_sha_driver = { .driver = { .name = "atmel_sha", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(atmel_sha_dt_ids), }, }; -- cgit v1.2.3 From 1ca5b7d95315c42cf0b78d33cd316e404a9f137c Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 15 Oct 2013 16:37:44 +0200 Subject: crypto: atmel-sha - add sha information to the log Depending on peripheral capabilities, print SHA information at the end of the probe function. Signed-off-by: Nicolas Ferre Acked-by: Herbert Xu --- drivers/crypto/atmel-sha.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/crypto') diff --git a/drivers/crypto/atmel-sha.c b/drivers/crypto/atmel-sha.c index ecfdf727cc36..0618be06b9fb 100644 --- a/drivers/crypto/atmel-sha.c +++ b/drivers/crypto/atmel-sha.c @@ -1469,7 +1469,9 @@ static int atmel_sha_probe(struct platform_device *pdev) if (err) goto err_algs; - dev_info(dev, "Atmel SHA1/SHA256\n"); + dev_info(dev, "Atmel SHA1/SHA256%s%s\n", + sha_dd->caps.has_sha224 ? "/SHA224" : "", + sha_dd->caps.has_sha_384_512 ? "/SHA384/SHA512" : ""); return 0; -- cgit v1.2.3