From aa83e30d8f71c966498f8f7f587514283c47e1b6 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 21 Mar 2014 17:18:54 +0000 Subject: drm/i915: Rename GFX_TLB_INVALIDATE_ALWAYS The documentation calls this GFX_MODE bit "Flush TLB invalidate Mode". However, that is not a good name for an enable bit as it doesn't make it clear what is enabled. An even worse name is GFX_TLB_INVALIDATE_ALWAYS as enabling that bit actually prevents the TLB from being invalidated at every flush. This leads to great confusion when reading code and proposed patches. To get around this try to bake in what is enabled by setting the bit and call it GFX_TLB_INVALIDATE_EXPLICIT. Signed-off-by: Chris Wilson Cc: "Gupta, Sourab" Acked-by: "Gupta, Sourab" Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 2 +- drivers/gpu/drm/i915/intel_ringbuffer.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 9f5b18d9d885..15c27479edbc 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -841,7 +841,7 @@ enum punit_power_well { #define GFX_MODE_GEN7 0x0229c #define RING_MODE_GEN7(ring) ((ring)->mmio_base+0x29c) #define GFX_RUN_LIST_ENABLE (1<<15) -#define GFX_TLB_INVALIDATE_ALWAYS (1<<13) +#define GFX_TLB_INVALIDATE_EXPLICIT (1<<13) #define GFX_SURFACE_FAULT_ENABLE (1<<12) #define GFX_REPLAY_MODE (1<<11) #define GFX_PSMI_GRANULARITY (1<<10) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 6bc68bdcf433..64a0ecf970b9 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -589,11 +589,11 @@ static int init_render_ring(struct intel_ring_buffer *ring) /* Required for the hardware to program scanline values for waiting */ if (INTEL_INFO(dev)->gen == 6) I915_WRITE(GFX_MODE, - _MASKED_BIT_ENABLE(GFX_TLB_INVALIDATE_ALWAYS)); + _MASKED_BIT_ENABLE(GFX_TLB_INVALIDATE_EXPLICIT)); if (IS_GEN7(dev)) I915_WRITE(GFX_MODE_GEN7, - _MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) | + _MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_EXPLICIT) | _MASKED_BIT_ENABLE(GFX_REPLAY_MODE)); if (INTEL_INFO(dev)->gen >= 5) { @@ -616,7 +616,7 @@ static int init_render_ring(struct intel_ring_buffer *ring) * TODO: consider explicitly setting the bit for GEN5 */ ring->itlb_before_ctx_switch = - !!(I915_READ(GFX_MODE) & GFX_TLB_INVALIDATE_ALWAYS); + !!(I915_READ(GFX_MODE) & GFX_TLB_INVALIDATE_EXPLICIT); } if (INTEL_INFO(dev)->gen >= 6) -- cgit v1.2.3 From a028c4b02a77f6ed63a0b0c4d4340f4a9074df85 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sat, 15 Mar 2014 00:08:56 +0100 Subject: drm/i915: Add FIXME for bdw semaphore detection in hancheck Currently not an issue since we don't emit sempahores, but better not forget about those. As a little prep work extract the ipehr decoding for cleaner control flow. And apply a bit of polish. Cc: Ben Widawsky Reviewed-by: Mika Kuoppala Reviewed-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 20 ++++++++++++++++++-- drivers/gpu/drm/i915/i915_reg.h | 3 ++- 2 files changed, 20 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 26f217d63a3c..4be756f422ec 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2501,6 +2501,23 @@ ring_idle(struct intel_ring_buffer *ring, u32 seqno) i915_seqno_passed(seqno, ring_last_seqno(ring))); } +static bool +ipehr_is_semaphore_wait(struct drm_device *dev, u32 ipehr) +{ + if (INTEL_INFO(dev)->gen >= 8) { + /* + * FIXME: gen8 semaphore support - currently we don't emit + * semaphores on bdw anyway, but this needs to be addressed when + * we merge that code. + */ + return false; + } else { + ipehr &= ~MI_SEMAPHORE_SYNC_MASK; + return ipehr == (MI_SEMAPHORE_MBOX | MI_SEMAPHORE_COMPARE | + MI_SEMAPHORE_REGISTER); + } +} + static struct intel_ring_buffer * semaphore_waits_for(struct intel_ring_buffer *ring, u32 *seqno) { @@ -2509,8 +2526,7 @@ semaphore_waits_for(struct intel_ring_buffer *ring, u32 *seqno) int i; ipehr = I915_READ(RING_IPEHR(ring->mmio_base)); - if ((ipehr & ~(0x3 << 16)) != - (MI_SEMAPHORE_MBOX | MI_SEMAPHORE_COMPARE | MI_SEMAPHORE_REGISTER)) + if (!ipehr_is_semaphore_wait(ring->dev, ipehr)) return NULL; /* diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 15c27479edbc..085db1b089c1 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -244,7 +244,8 @@ #define MI_SEMAPHORE_SYNC_BVE (0<<16) /* VECS wait for BCS (VEBSYNC) */ #define MI_SEMAPHORE_SYNC_VVE (1<<16) /* VECS wait for VCS (VEVSYNC) */ #define MI_SEMAPHORE_SYNC_RVE (2<<16) /* VECS wait for RCS (VERSYNC) */ -#define MI_SEMAPHORE_SYNC_INVALID (3<<16) +#define MI_SEMAPHORE_SYNC_INVALID (3<<16) +#define MI_SEMAPHORE_SYNC_MASK (3<<16) #define MI_SET_CONTEXT MI_INSTR(0x18, 0) #define MI_MM_SPACE_GTT (1<<8) #define MI_MM_SPACE_PHYSICAL (0<<8) -- cgit v1.2.3 From 921d42ead788c1dab520634c693ff8887765182c Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 18 Mar 2014 10:26:04 +0100 Subject: drm/i915: make semaphore signaller detection more robust Extract all this logic into a new helper function semaphore_wait_to_signaller_ring because: - The current code has way too much magic. - The current code doesn't look at bi16, which encodes VECS signallers on HSW. Those are just added after the fact, so can't be encoded in a neat formula. - The current logic can't blow up since it limits its value range sufficiently, but that's a bit too tricky to rely on in my opinion. Especially when we start to add bdw support. - I'm not a big fan of the explicit ring->semaphore_register list, but I think it's more robust to use the same mapping both when constructing the semaphore commands and when decoding them. - Finally add a FIXME comment about lack of broadwell support here, like in the earlier ipehr semaphore cmd detection function. Cc: Mika Kuoppala Cc: Ben Widawsky Cc: Chris Wilson Reviewed-by: Mika Kuoppala [danvet: Actually drop the untrue claim in the commit message Chris pointed out.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 35 ++++++++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 4be756f422ec..c8d2445b259c 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2518,6 +2518,39 @@ ipehr_is_semaphore_wait(struct drm_device *dev, u32 ipehr) } } +static struct intel_ring_buffer * +semaphore_wait_to_signaller_ring(struct intel_ring_buffer *ring, u32 ipehr) +{ + struct drm_i915_private *dev_priv = ring->dev->dev_private; + struct intel_ring_buffer *signaller; + int i; + + if (INTEL_INFO(dev_priv->dev)->gen >= 8) { + /* + * FIXME: gen8 semaphore support - currently we don't emit + * semaphores on bdw anyway, but this needs to be addressed when + * we merge that code. + */ + return NULL; + } else { + u32 sync_bits = ipehr & MI_SEMAPHORE_SYNC_MASK; + + for_each_ring(signaller, dev_priv, i) { + if(ring == signaller) + continue; + + if (sync_bits == + signaller->semaphore_register[ring->id]) + return signaller; + } + } + + DRM_ERROR("No signaller ring found for ring %i, ipehr 0x%08x\n", + ring->id, ipehr); + + return NULL; +} + static struct intel_ring_buffer * semaphore_waits_for(struct intel_ring_buffer *ring, u32 *seqno) { @@ -2558,7 +2591,7 @@ semaphore_waits_for(struct intel_ring_buffer *ring, u32 *seqno) return NULL; *seqno = ioread32(ring->virtual_start + head + 4) + 1; - return &dev_priv->ring[(ring->id + (((ipehr >> 17) & 1) + 1)) % 3]; + return semaphore_wait_to_signaller_ring(ring, ipehr); } static int semaphore_passed(struct intel_ring_buffer *ring) -- cgit v1.2.3 From 0260c42003cdd61b02155cd1a04d72467ce770fa Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Sat, 22 Mar 2014 22:47:21 -0700 Subject: drm/i915: Split out GTT specific header file This file contains all necessary defines, prototypes and typesdefs for manipulating GEN graphics address translation (this does not include the legacy AGP driver) Reiterating the comment in the header, "Please try to maintain the following order within this file unless it makes sense to do otherwise. From top to bottom: 1. typedefs 2. #defines, and macros 3. structure definitions 4. function prototypes Within each section, please try to order by generation in ascending order, from top to bottom (ie. GEN6 on the top, GEN8 on the bottom)." I've made some minor cleanups, and fixed a couple of typos while here - but there should be no functional changes. The purpose of the patch is to reduce clutter in our main header file, making room for new growth, and make documentation of our interfaces easier by splitting things out. With a little more work, like making i915_gtt a pointer, we could potentially completely isolate this header from i915_drv.h. At the moment however, I don't think it's worth the effort. Personally, I would have liked to put the PTE encoding functions in this file too, but I didn't want to rock the boat too much. A similar patch has been in use on my machine for some time. This exact patch though has only been compile tested. Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 178 +---------------------- drivers/gpu/drm/i915/i915_gem_gtt.c | 69 --------- drivers/gpu/drm/i915/i915_gem_gtt.h | 283 ++++++++++++++++++++++++++++++++++++ 3 files changed, 286 insertions(+), 244 deletions(-) create mode 100644 drivers/gpu/drm/i915/i915_gem_gtt.h (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 0905cd915589..ac764d0fda4b 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -35,6 +35,7 @@ #include "i915_reg.h" #include "intel_bios.h" #include "intel_ringbuffer.h" +#include "i915_gem_gtt.h" #include #include #include @@ -572,168 +573,6 @@ enum i915_cache_level { I915_CACHE_WT, /* hsw:gt3e WriteThrough for scanouts */ }; -typedef uint32_t gen6_gtt_pte_t; - -/** - * A VMA represents a GEM BO that is bound into an address space. Therefore, a - * VMA's presence cannot be guaranteed before binding, or after unbinding the - * object into/from the address space. - * - * To make things as simple as possible (ie. no refcounting), a VMA's lifetime - * will always be <= an objects lifetime. So object refcounting should cover us. - */ -struct i915_vma { - struct drm_mm_node node; - struct drm_i915_gem_object *obj; - struct i915_address_space *vm; - - /** This object's place on the active/inactive lists */ - struct list_head mm_list; - - struct list_head vma_link; /* Link in the object's VMA list */ - - /** This vma's place in the batchbuffer or on the eviction list */ - struct list_head exec_list; - - /** - * Used for performing relocations during execbuffer insertion. - */ - struct hlist_node exec_node; - unsigned long exec_handle; - struct drm_i915_gem_exec_object2 *exec_entry; - - /** - * How many users have pinned this object in GTT space. The following - * users can each hold at most one reference: pwrite/pread, pin_ioctl - * (via user_pin_count), execbuffer (objects are not allowed multiple - * times for the same batchbuffer), and the framebuffer code. When - * switching/pageflipping, the framebuffer code has at most two buffers - * pinned per crtc. - * - * In the worst case this is 1 + 1 + 1 + 2*2 = 7. That would fit into 3 - * bits with absolutely no headroom. So use 4 bits. */ - unsigned int pin_count:4; -#define DRM_I915_GEM_OBJECT_MAX_PIN_COUNT 0xf - - /** Unmap an object from an address space. This usually consists of - * setting the valid PTE entries to a reserved scratch page. */ - void (*unbind_vma)(struct i915_vma *vma); - /* Map an object into an address space with the given cache flags. */ -#define GLOBAL_BIND (1<<0) - void (*bind_vma)(struct i915_vma *vma, - enum i915_cache_level cache_level, - u32 flags); -}; - -struct i915_address_space { - struct drm_mm mm; - struct drm_device *dev; - struct list_head global_link; - unsigned long start; /* Start offset always 0 for dri2 */ - size_t total; /* size addr space maps (ex. 2GB for ggtt) */ - - struct { - dma_addr_t addr; - struct page *page; - } scratch; - - /** - * List of objects currently involved in rendering. - * - * Includes buffers having the contents of their GPU caches - * flushed, not necessarily primitives. last_rendering_seqno - * represents when the rendering involved will be completed. - * - * A reference is held on the buffer while on this list. - */ - struct list_head active_list; - - /** - * LRU list of objects which are not in the ringbuffer and - * are ready to unbind, but are still in the GTT. - * - * last_rendering_seqno is 0 while an object is in this list. - * - * A reference is not held on the buffer while on this list, - * as merely being GTT-bound shouldn't prevent its being - * freed, and we'll pull it off the list in the free path. - */ - struct list_head inactive_list; - - /* FIXME: Need a more generic return type */ - gen6_gtt_pte_t (*pte_encode)(dma_addr_t addr, - enum i915_cache_level level, - bool valid); /* Create a valid PTE */ - void (*clear_range)(struct i915_address_space *vm, - uint64_t start, - uint64_t length, - bool use_scratch); - void (*insert_entries)(struct i915_address_space *vm, - struct sg_table *st, - uint64_t start, - enum i915_cache_level cache_level); - void (*cleanup)(struct i915_address_space *vm); -}; - -/* The Graphics Translation Table is the way in which GEN hardware translates a - * Graphics Virtual Address into a Physical Address. In addition to the normal - * collateral associated with any va->pa translations GEN hardware also has a - * portion of the GTT which can be mapped by the CPU and remain both coherent - * and correct (in cases like swizzling). That region is referred to as GMADR in - * the spec. - */ -struct i915_gtt { - struct i915_address_space base; - size_t stolen_size; /* Total size of stolen memory */ - - unsigned long mappable_end; /* End offset that we can CPU map */ - struct io_mapping *mappable; /* Mapping to our CPU mappable region */ - phys_addr_t mappable_base; /* PA of our GMADR */ - - /** "Graphics Stolen Memory" holds the global PTEs */ - void __iomem *gsm; - - bool do_idle_maps; - - int mtrr; - - /* global gtt ops */ - int (*gtt_probe)(struct drm_device *dev, size_t *gtt_total, - size_t *stolen, phys_addr_t *mappable_base, - unsigned long *mappable_end); -}; -#define gtt_total_entries(gtt) ((gtt).base.total >> PAGE_SHIFT) - -#define GEN8_LEGACY_PDPS 4 -struct i915_hw_ppgtt { - struct i915_address_space base; - struct kref ref; - struct drm_mm_node node; - unsigned num_pd_entries; - unsigned num_pd_pages; /* gen8+ */ - union { - struct page **pt_pages; - struct page **gen8_pt_pages[GEN8_LEGACY_PDPS]; - }; - struct page *pd_pages; - union { - uint32_t pd_offset; - dma_addr_t pd_dma_addr[GEN8_LEGACY_PDPS]; - }; - union { - dma_addr_t *pt_dma_addr; - dma_addr_t *gen8_pt_dma_addr[4]; - }; - - struct i915_hw_context *ctx; - - int (*enable)(struct i915_hw_ppgtt *ppgtt); - int (*switch_mm)(struct i915_hw_ppgtt *ppgtt, - struct intel_ring_buffer *ring, - bool synchronous); - void (*debug_dump)(struct i915_hw_ppgtt *ppgtt, struct seq_file *m); -}; - struct i915_ctx_hang_stats { /* This context had batch pending when hang was declared */ unsigned batch_pending; @@ -1523,7 +1362,7 @@ typedef struct drm_i915_private { struct mutex modeset_restore_lock; struct list_head vm_list; /* Global list of all address spaces */ - struct i915_gtt gtt; /* VMA representing the global address space */ + struct i915_gtt gtt; /* VM representing the global address space */ struct i915_gem_mm mm; @@ -2467,23 +2306,12 @@ int __must_check i915_gem_evict_something(struct drm_device *dev, int i915_gem_evict_vm(struct i915_address_space *vm, bool do_idle); int i915_gem_evict_everything(struct drm_device *dev); -/* i915_gem_gtt.c */ -void i915_check_and_clear_faults(struct drm_device *dev); -void i915_gem_suspend_gtt_mappings(struct drm_device *dev); -void i915_gem_restore_gtt_mappings(struct drm_device *dev); -int __must_check i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj); -void i915_gem_gtt_finish_object(struct drm_i915_gem_object *obj); -void i915_gem_init_global_gtt(struct drm_device *dev); -void i915_gem_setup_global_gtt(struct drm_device *dev, unsigned long start, - unsigned long mappable_end, unsigned long end); -int i915_gem_gtt_init(struct drm_device *dev); +/* belongs in i915_gem_gtt.h */ static inline void i915_gem_chipset_flush(struct drm_device *dev) { if (INTEL_INFO(dev)->gen < 6) intel_gtt_chipset_flush(); } -int i915_gem_init_ppgtt(struct drm_device *dev, struct i915_hw_ppgtt *ppgtt); -bool intel_enable_ppgtt(struct drm_device *dev, bool full); /* i915_gem_stolen.c */ int i915_gem_init_stolen(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 3b1f621f1009..0334cf20b3db 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -55,59 +55,6 @@ bool intel_enable_ppgtt(struct drm_device *dev, bool full) return HAS_ALIASING_PPGTT(dev); } -#define GEN6_PPGTT_PD_ENTRIES 512 -#define I915_PPGTT_PT_ENTRIES (PAGE_SIZE / sizeof(gen6_gtt_pte_t)) -typedef uint64_t gen8_gtt_pte_t; -typedef gen8_gtt_pte_t gen8_ppgtt_pde_t; - -/* PPGTT stuff */ -#define GEN6_GTT_ADDR_ENCODE(addr) ((addr) | (((addr) >> 28) & 0xff0)) -#define HSW_GTT_ADDR_ENCODE(addr) ((addr) | (((addr) >> 28) & 0x7f0)) - -#define GEN6_PDE_VALID (1 << 0) -/* gen6+ has bit 11-4 for physical addr bit 39-32 */ -#define GEN6_PDE_ADDR_ENCODE(addr) GEN6_GTT_ADDR_ENCODE(addr) - -#define GEN6_PTE_VALID (1 << 0) -#define GEN6_PTE_UNCACHED (1 << 1) -#define HSW_PTE_UNCACHED (0) -#define GEN6_PTE_CACHE_LLC (2 << 1) -#define GEN7_PTE_CACHE_L3_LLC (3 << 1) -#define GEN6_PTE_ADDR_ENCODE(addr) GEN6_GTT_ADDR_ENCODE(addr) -#define HSW_PTE_ADDR_ENCODE(addr) HSW_GTT_ADDR_ENCODE(addr) - -/* Cacheability Control is a 4-bit value. The low three bits are stored in * - * bits 3:1 of the PTE, while the fourth bit is stored in bit 11 of the PTE. - */ -#define HSW_CACHEABILITY_CONTROL(bits) ((((bits) & 0x7) << 1) | \ - (((bits) & 0x8) << (11 - 3))) -#define HSW_WB_LLC_AGE3 HSW_CACHEABILITY_CONTROL(0x2) -#define HSW_WB_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0x3) -#define HSW_WB_ELLC_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0xb) -#define HSW_WB_ELLC_LLC_AGE3 HSW_CACHEABILITY_CONTROL(0x8) -#define HSW_WT_ELLC_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0x6) -#define HSW_WT_ELLC_LLC_AGE3 HSW_CACHEABILITY_CONTROL(0x7) - -#define GEN8_PTES_PER_PAGE (PAGE_SIZE / sizeof(gen8_gtt_pte_t)) -#define GEN8_PDES_PER_PAGE (PAGE_SIZE / sizeof(gen8_ppgtt_pde_t)) - -/* GEN8 legacy style addressis defined as a 3 level page table: - * 31:30 | 29:21 | 20:12 | 11:0 - * PDPE | PDE | PTE | offset - * The difference as compared to normal x86 3 level page table is the PDPEs are - * programmed via register. - */ -#define GEN8_PDPE_SHIFT 30 -#define GEN8_PDPE_MASK 0x3 -#define GEN8_PDE_SHIFT 21 -#define GEN8_PDE_MASK 0x1ff -#define GEN8_PTE_SHIFT 12 -#define GEN8_PTE_MASK 0x1ff - -#define PPAT_UNCACHED_INDEX (_PAGE_PWT | _PAGE_PCD) -#define PPAT_CACHED_PDE_INDEX 0 /* WB LLC */ -#define PPAT_CACHED_INDEX _PAGE_PAT /* WB LLCeLLC */ -#define PPAT_DISPLAY_ELLC_INDEX _PAGE_PCD /* WT eLLC */ static void ppgtt_bind_vma(struct i915_vma *vma, enum i915_cache_level cache_level, @@ -187,9 +134,6 @@ static gen6_gtt_pte_t ivb_pte_encode(dma_addr_t addr, return pte; } -#define BYT_PTE_WRITEABLE (1 << 1) -#define BYT_PTE_SNOOPED_BY_CPU_CACHES (1 << 2) - static gen6_gtt_pte_t byt_pte_encode(dma_addr_t addr, enum i915_cache_level level, bool valid) @@ -1057,8 +1001,6 @@ static void gen6_ppgtt_cleanup(struct i915_address_space *vm) static int gen6_ppgtt_allocate_page_directories(struct i915_hw_ppgtt *ppgtt) { -#define GEN6_PD_ALIGN (PAGE_SIZE * 16) -#define GEN6_PD_SIZE (GEN6_PPGTT_PD_ENTRIES * PAGE_SIZE) struct drm_device *dev = ppgtt->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; bool retried = false; @@ -1847,17 +1789,6 @@ static int ggtt_probe_common(struct drm_device *dev, * writing this data shouldn't be harmful even in those cases. */ static void gen8_setup_private_ppat(struct drm_i915_private *dev_priv) { -#define GEN8_PPAT_UC (0<<0) -#define GEN8_PPAT_WC (1<<0) -#define GEN8_PPAT_WT (2<<0) -#define GEN8_PPAT_WB (3<<0) -#define GEN8_PPAT_ELLC_OVERRIDE (0<<2) -/* FIXME(BDW): Bspec is completely confused about cache control bits. */ -#define GEN8_PPAT_LLC (1<<2) -#define GEN8_PPAT_LLCELLC (2<<2) -#define GEN8_PPAT_LLCeLLC (3<<2) -#define GEN8_PPAT_AGE(x) (x<<4) -#define GEN8_PPAT(i, x) ((uint64_t) (x) << ((i) * 8)) uint64_t pat; pat = GEN8_PPAT(0, GEN8_PPAT_WB | GEN8_PPAT_LLC) | /* for normal objects, no eLLC */ diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h new file mode 100644 index 000000000000..b5e8ac0f5ce4 --- /dev/null +++ b/drivers/gpu/drm/i915/i915_gem_gtt.h @@ -0,0 +1,283 @@ +/* + * Copyright © 2014 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Please try to maintain the following order within this file unless it makes + * sense to do otherwise. From top to bottom: + * 1. typedefs + * 2. #defines, and macros + * 3. structure definitions + * 4. function prototypes + * + * Within each section, please try to order by generation in ascending order, + * from top to bottom (ie. gen6 on the top, gen8 on the bottom). + */ + +#ifndef __I915_GEM_GTT_H__ +#define __I915_GEM_GTT_H__ + +typedef uint32_t gen6_gtt_pte_t; +typedef uint64_t gen8_gtt_pte_t; +typedef gen8_gtt_pte_t gen8_ppgtt_pde_t; + +#define gtt_total_entries(gtt) ((gtt).base.total >> PAGE_SHIFT) + +#define I915_PPGTT_PT_ENTRIES (PAGE_SIZE / sizeof(gen6_gtt_pte_t)) +/* gen6-hsw has bit 11-4 for physical addr bit 39-32 */ +#define GEN6_GTT_ADDR_ENCODE(addr) ((addr) | (((addr) >> 28) & 0xff0)) +#define GEN6_PTE_ADDR_ENCODE(addr) GEN6_GTT_ADDR_ENCODE(addr) +#define GEN6_PDE_ADDR_ENCODE(addr) GEN6_GTT_ADDR_ENCODE(addr) +#define GEN6_PTE_CACHE_LLC (2 << 1) +#define GEN6_PTE_UNCACHED (1 << 1) +#define GEN6_PTE_VALID (1 << 0) + +#define GEN6_PPGTT_PD_ENTRIES 512 +#define GEN6_PD_SIZE (GEN6_PPGTT_PD_ENTRIES * PAGE_SIZE) +#define GEN6_PD_ALIGN (PAGE_SIZE * 16) +#define GEN6_PDE_VALID (1 << 0) + +#define GEN7_PTE_CACHE_L3_LLC (3 << 1) + +#define BYT_PTE_SNOOPED_BY_CPU_CACHES (1 << 2) +#define BYT_PTE_WRITEABLE (1 << 1) + +/* Cacheability Control is a 4-bit value. The low three bits are stored in bits + * 3:1 of the PTE, while the fourth bit is stored in bit 11 of the PTE. + */ +#define HSW_CACHEABILITY_CONTROL(bits) ((((bits) & 0x7) << 1) | \ + (((bits) & 0x8) << (11 - 3))) +#define HSW_WB_LLC_AGE3 HSW_CACHEABILITY_CONTROL(0x2) +#define HSW_WB_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0x3) +#define HSW_WB_ELLC_LLC_AGE3 HSW_CACHEABILITY_CONTROL(0x8) +#define HSW_WB_ELLC_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0xb) +#define HSW_WT_ELLC_LLC_AGE3 HSW_CACHEABILITY_CONTROL(0x7) +#define HSW_WT_ELLC_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0x6) +#define HSW_PTE_UNCACHED (0) +#define HSW_GTT_ADDR_ENCODE(addr) ((addr) | (((addr) >> 28) & 0x7f0)) +#define HSW_PTE_ADDR_ENCODE(addr) HSW_GTT_ADDR_ENCODE(addr) + +/* GEN8 legacy style address is defined as a 3 level page table: + * 31:30 | 29:21 | 20:12 | 11:0 + * PDPE | PDE | PTE | offset + * The difference as compared to normal x86 3 level page table is the PDPEs are + * programmed via register. + */ +#define GEN8_PDPE_SHIFT 30 +#define GEN8_PDPE_MASK 0x3 +#define GEN8_PDE_SHIFT 21 +#define GEN8_PDE_MASK 0x1ff +#define GEN8_PTE_SHIFT 12 +#define GEN8_PTE_MASK 0x1ff +#define GEN8_LEGACY_PDPS 4 +#define GEN8_PTES_PER_PAGE (PAGE_SIZE / sizeof(gen8_gtt_pte_t)) +#define GEN8_PDES_PER_PAGE (PAGE_SIZE / sizeof(gen8_ppgtt_pde_t)) + +#define PPAT_UNCACHED_INDEX (_PAGE_PWT | _PAGE_PCD) +#define PPAT_CACHED_PDE_INDEX 0 /* WB LLC */ +#define PPAT_CACHED_INDEX _PAGE_PAT /* WB LLCeLLC */ +#define PPAT_DISPLAY_ELLC_INDEX _PAGE_PCD /* WT eLLC */ + +#define GEN8_PPAT_AGE(x) (x<<4) +#define GEN8_PPAT_LLCeLLC (3<<2) +#define GEN8_PPAT_LLCELLC (2<<2) +#define GEN8_PPAT_LLC (1<<2) +#define GEN8_PPAT_WB (3<<0) +#define GEN8_PPAT_WT (2<<0) +#define GEN8_PPAT_WC (1<<0) +#define GEN8_PPAT_UC (0<<0) +#define GEN8_PPAT_ELLC_OVERRIDE (0<<2) +#define GEN8_PPAT(i, x) ((uint64_t) (x) << ((i) * 8)) + +enum i915_cache_level; +/** + * A VMA represents a GEM BO that is bound into an address space. Therefore, a + * VMA's presence cannot be guaranteed before binding, or after unbinding the + * object into/from the address space. + * + * To make things as simple as possible (ie. no refcounting), a VMA's lifetime + * will always be <= an objects lifetime. So object refcounting should cover us. + */ +struct i915_vma { + struct drm_mm_node node; + struct drm_i915_gem_object *obj; + struct i915_address_space *vm; + + /** This object's place on the active/inactive lists */ + struct list_head mm_list; + + struct list_head vma_link; /* Link in the object's VMA list */ + + /** This vma's place in the batchbuffer or on the eviction list */ + struct list_head exec_list; + + /** + * Used for performing relocations during execbuffer insertion. + */ + struct hlist_node exec_node; + unsigned long exec_handle; + struct drm_i915_gem_exec_object2 *exec_entry; + + /** + * How many users have pinned this object in GTT space. The following + * users can each hold at most one reference: pwrite/pread, pin_ioctl + * (via user_pin_count), execbuffer (objects are not allowed multiple + * times for the same batchbuffer), and the framebuffer code. When + * switching/pageflipping, the framebuffer code has at most two buffers + * pinned per crtc. + * + * In the worst case this is 1 + 1 + 1 + 2*2 = 7. That would fit into 3 + * bits with absolutely no headroom. So use 4 bits. */ + unsigned int pin_count:4; +#define DRM_I915_GEM_OBJECT_MAX_PIN_COUNT 0xf + + /** Unmap an object from an address space. This usually consists of + * setting the valid PTE entries to a reserved scratch page. */ + void (*unbind_vma)(struct i915_vma *vma); + /* Map an object into an address space with the given cache flags. */ +#define GLOBAL_BIND (1<<0) + void (*bind_vma)(struct i915_vma *vma, + enum i915_cache_level cache_level, + u32 flags); +}; + +struct i915_address_space { + struct drm_mm mm; + struct drm_device *dev; + struct list_head global_link; + unsigned long start; /* Start offset always 0 for dri2 */ + size_t total; /* size addr space maps (ex. 2GB for ggtt) */ + + struct { + dma_addr_t addr; + struct page *page; + } scratch; + + /** + * List of objects currently involved in rendering. + * + * Includes buffers having the contents of their GPU caches + * flushed, not necessarily primitives. last_rendering_seqno + * represents when the rendering involved will be completed. + * + * A reference is held on the buffer while on this list. + */ + struct list_head active_list; + + /** + * LRU list of objects which are not in the ringbuffer and + * are ready to unbind, but are still in the GTT. + * + * last_rendering_seqno is 0 while an object is in this list. + * + * A reference is not held on the buffer while on this list, + * as merely being GTT-bound shouldn't prevent its being + * freed, and we'll pull it off the list in the free path. + */ + struct list_head inactive_list; + + /* FIXME: Need a more generic return type */ + gen6_gtt_pte_t (*pte_encode)(dma_addr_t addr, + enum i915_cache_level level, + bool valid); /* Create a valid PTE */ + void (*clear_range)(struct i915_address_space *vm, + uint64_t start, + uint64_t length, + bool use_scratch); + void (*insert_entries)(struct i915_address_space *vm, + struct sg_table *st, + uint64_t start, + enum i915_cache_level cache_level); + void (*cleanup)(struct i915_address_space *vm); +}; + +/* The Graphics Translation Table is the way in which GEN hardware translates a + * Graphics Virtual Address into a Physical Address. In addition to the normal + * collateral associated with any va->pa translations GEN hardware also has a + * portion of the GTT which can be mapped by the CPU and remain both coherent + * and correct (in cases like swizzling). That region is referred to as GMADR in + * the spec. + */ +struct i915_gtt { + struct i915_address_space base; + size_t stolen_size; /* Total size of stolen memory */ + + unsigned long mappable_end; /* End offset that we can CPU map */ + struct io_mapping *mappable; /* Mapping to our CPU mappable region */ + phys_addr_t mappable_base; /* PA of our GMADR */ + + /** "Graphics Stolen Memory" holds the global PTEs */ + void __iomem *gsm; + + bool do_idle_maps; + + int mtrr; + + /* global gtt ops */ + int (*gtt_probe)(struct drm_device *dev, size_t *gtt_total, + size_t *stolen, phys_addr_t *mappable_base, + unsigned long *mappable_end); +}; + +struct i915_hw_ppgtt { + struct i915_address_space base; + struct kref ref; + struct drm_mm_node node; + unsigned num_pd_entries; + unsigned num_pd_pages; /* gen8+ */ + union { + struct page **pt_pages; + struct page **gen8_pt_pages[GEN8_LEGACY_PDPS]; + }; + struct page *pd_pages; + union { + uint32_t pd_offset; + dma_addr_t pd_dma_addr[GEN8_LEGACY_PDPS]; + }; + union { + dma_addr_t *pt_dma_addr; + dma_addr_t *gen8_pt_dma_addr[4]; + }; + + struct i915_hw_context *ctx; + + int (*enable)(struct i915_hw_ppgtt *ppgtt); + int (*switch_mm)(struct i915_hw_ppgtt *ppgtt, + struct intel_ring_buffer *ring, + bool synchronous); + void (*debug_dump)(struct i915_hw_ppgtt *ppgtt, struct seq_file *m); +}; + +int i915_gem_gtt_init(struct drm_device *dev); +void i915_gem_init_global_gtt(struct drm_device *dev); +void i915_gem_setup_global_gtt(struct drm_device *dev, unsigned long start, + unsigned long mappable_end, unsigned long end); + +bool intel_enable_ppgtt(struct drm_device *dev, bool full); +int i915_gem_init_ppgtt(struct drm_device *dev, struct i915_hw_ppgtt *ppgtt); + +void i915_check_and_clear_faults(struct drm_device *dev); +void i915_gem_suspend_gtt_mappings(struct drm_device *dev); +void i915_gem_restore_gtt_mappings(struct drm_device *dev); + +int __must_check i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj); +void i915_gem_gtt_finish_object(struct drm_i915_gem_object *obj); + +#endif -- cgit v1.2.3 From 8d214b7d9c45f4af23ce41b2bc74f79c44f760de Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Mon, 24 Mar 2014 18:06:00 -0700 Subject: drm/i915: Allow full PPGTT with param override When PPGTT was disabled by default, the patch also prevented the user from overriding this behavior via module parameter. Being able to test this on arbitrary kernels is extremely beneficial to track down the remaining bugs. The patch that prevented this was: commit 93a25a9e2d67765c3092bfaac9b855d95e39df97 Author: Daniel Vetter Date: Thu Mar 6 09:40:43 2014 +0100 drm/i915: Disable full ppgtt by default By default PPGTT is set to -1. 0 means off, 1 means aliasing only, 2 means full, all other values are reserved. Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_gtt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 0334cf20b3db..b31cde1d5979 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -50,7 +50,7 @@ bool intel_enable_ppgtt(struct drm_device *dev, bool full) /* Full ppgtt disabled by default for now due to issues. */ if (full) - return false; /* HAS_PPGTT(dev) */ + return HAS_PPGTT(dev) && (i915.enable_ppgtt == 2); else return HAS_ALIASING_PPGTT(dev); } -- cgit v1.2.3 From 3a6fa9849e02cab3eceff9f7f308dbbc5b5e7231 Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Tue, 18 Feb 2014 10:15:47 -0800 Subject: drm/i915: Initial command parser table definitions Add command tables defining irregular length commands for each ring. This requires a few new command opcode definitions. v2: Whitespace adjustment in command definitions, sparse fix for !F OTC-Tracker: AXIA-4631 Change-Id: I064bceb457e15f46928058352afe76d918c58ef5 Signed-off-by: Brad Volkin Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 157 +++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/i915_reg.h | 46 ++++++++++ 2 files changed, 203 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index 0eaed44aee6d..d0f9a6fb7ba3 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -86,6 +86,148 @@ * general bitmasking mechanism. */ +#define STD_MI_OPCODE_MASK 0xFF800000 +#define STD_3D_OPCODE_MASK 0xFFFF0000 +#define STD_2D_OPCODE_MASK 0xFFC00000 +#define STD_MFX_OPCODE_MASK 0xFFFF0000 + +#define CMD(op, opm, f, lm, fl, ...) \ + { \ + .flags = (fl) | ((f) ? CMD_DESC_FIXED : 0), \ + .cmd = { (op), (opm) }, \ + .length = { (lm) }, \ + __VA_ARGS__ \ + } + +/* Convenience macros to compress the tables */ +#define SMI STD_MI_OPCODE_MASK +#define S3D STD_3D_OPCODE_MASK +#define S2D STD_2D_OPCODE_MASK +#define SMFX STD_MFX_OPCODE_MASK +#define F true +#define S CMD_DESC_SKIP +#define R CMD_DESC_REJECT +#define W CMD_DESC_REGISTER +#define B CMD_DESC_BITMASK +#define M CMD_DESC_MASTER + +/* Command Mask Fixed Len Action + ---------------------------------------------------------- */ +static const struct drm_i915_cmd_descriptor common_cmds[] = { + CMD( MI_NOOP, SMI, F, 1, S ), + CMD( MI_USER_INTERRUPT, SMI, F, 1, S ), + CMD( MI_WAIT_FOR_EVENT, SMI, F, 1, S ), + CMD( MI_ARB_CHECK, SMI, F, 1, S ), + CMD( MI_REPORT_HEAD, SMI, F, 1, S ), + CMD( MI_SUSPEND_FLUSH, SMI, F, 1, S ), + CMD( MI_SEMAPHORE_MBOX, SMI, !F, 0xFF, S ), + CMD( MI_STORE_DWORD_INDEX, SMI, !F, 0xFF, S ), + CMD( MI_LOAD_REGISTER_IMM(1), SMI, !F, 0xFF, S ), + CMD( MI_STORE_REGISTER_MEM(1), SMI, !F, 0xFF, S ), + CMD( MI_LOAD_REGISTER_MEM, SMI, !F, 0xFF, S ), + CMD( MI_BATCH_BUFFER_START, SMI, !F, 0xFF, S ), +}; + +static const struct drm_i915_cmd_descriptor render_cmds[] = { + CMD( MI_FLUSH, SMI, F, 1, S ), + CMD( MI_ARB_ON_OFF, SMI, F, 1, S ), + CMD( MI_PREDICATE, SMI, F, 1, S ), + CMD( MI_TOPOLOGY_FILTER, SMI, F, 1, S ), + CMD( MI_DISPLAY_FLIP, SMI, !F, 0xFF, S ), + CMD( MI_SET_CONTEXT, SMI, !F, 0xFF, S ), + CMD( MI_URB_CLEAR, SMI, !F, 0xFF, S ), + CMD( MI_UPDATE_GTT, SMI, !F, 0xFF, S ), + CMD( MI_CLFLUSH, SMI, !F, 0x3FF, S ), + CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ), + CMD( GFX_OP_3DSTATE_VF_STATISTICS, S3D, F, 1, S ), + CMD( PIPELINE_SELECT, S3D, F, 1, S ), + CMD( GPGPU_OBJECT, S3D, !F, 0xFF, S ), + CMD( GPGPU_WALKER, S3D, !F, 0xFF, S ), + CMD( GFX_OP_3DSTATE_SO_DECL_LIST, S3D, !F, 0x1FF, S ), +}; + +static const struct drm_i915_cmd_descriptor hsw_render_cmds[] = { + CMD( MI_SET_PREDICATE, SMI, F, 1, S ), + CMD( MI_RS_CONTROL, SMI, F, 1, S ), + CMD( MI_URB_ATOMIC_ALLOC, SMI, F, 1, S ), + CMD( MI_RS_CONTEXT, SMI, F, 1, S ), + CMD( MI_LOAD_REGISTER_REG, SMI, !F, 0xFF, S ), + CMD( MI_RS_STORE_DATA_IMM, SMI, !F, 0xFF, S ), + CMD( MI_LOAD_URB_MEM, SMI, !F, 0xFF, S ), + CMD( MI_STORE_URB_MEM, SMI, !F, 0xFF, S ), + CMD( GFX_OP_3DSTATE_DX9_CONSTANTF_VS, S3D, !F, 0x7FF, S ), + CMD( GFX_OP_3DSTATE_DX9_CONSTANTF_PS, S3D, !F, 0x7FF, S ), + + CMD( GFX_OP_3DSTATE_BINDING_TABLE_EDIT_VS, S3D, !F, 0x1FF, S ), + CMD( GFX_OP_3DSTATE_BINDING_TABLE_EDIT_GS, S3D, !F, 0x1FF, S ), + CMD( GFX_OP_3DSTATE_BINDING_TABLE_EDIT_HS, S3D, !F, 0x1FF, S ), + CMD( GFX_OP_3DSTATE_BINDING_TABLE_EDIT_DS, S3D, !F, 0x1FF, S ), + CMD( GFX_OP_3DSTATE_BINDING_TABLE_EDIT_PS, S3D, !F, 0x1FF, S ), +}; + +static const struct drm_i915_cmd_descriptor video_cmds[] = { + CMD( MI_ARB_ON_OFF, SMI, F, 1, S ), + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, S ), + CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ), + /* + * MFX_WAIT doesn't fit the way we handle length for most commands. + * It has a length field but it uses a non-standard length bias. + * It is always 1 dword though, so just treat it as fixed length. + */ + CMD( MFX_WAIT, SMFX, F, 1, S ), +}; + +static const struct drm_i915_cmd_descriptor vecs_cmds[] = { + CMD( MI_ARB_ON_OFF, SMI, F, 1, S ), + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, S ), + CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ), +}; + +static const struct drm_i915_cmd_descriptor blt_cmds[] = { + CMD( MI_DISPLAY_FLIP, SMI, !F, 0xFF, S ), + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0x3FF, S ), + CMD( COLOR_BLT, S2D, !F, 0x3F, S ), + CMD( SRC_COPY_BLT, S2D, !F, 0x3F, S ), +}; + +#undef CMD +#undef SMI +#undef S3D +#undef S2D +#undef SMFX +#undef F +#undef S +#undef R +#undef W +#undef B +#undef M + +static const struct drm_i915_cmd_table gen7_render_cmds[] = { + { common_cmds, ARRAY_SIZE(common_cmds) }, + { render_cmds, ARRAY_SIZE(render_cmds) }, +}; + +static const struct drm_i915_cmd_table hsw_render_ring_cmds[] = { + { common_cmds, ARRAY_SIZE(common_cmds) }, + { render_cmds, ARRAY_SIZE(render_cmds) }, + { hsw_render_cmds, ARRAY_SIZE(hsw_render_cmds) }, +}; + +static const struct drm_i915_cmd_table gen7_video_cmds[] = { + { common_cmds, ARRAY_SIZE(common_cmds) }, + { video_cmds, ARRAY_SIZE(video_cmds) }, +}; + +static const struct drm_i915_cmd_table hsw_vebox_cmds[] = { + { common_cmds, ARRAY_SIZE(common_cmds) }, + { vecs_cmds, ARRAY_SIZE(vecs_cmds) }, +}; + +static const struct drm_i915_cmd_table gen7_blt_cmds[] = { + { common_cmds, ARRAY_SIZE(common_cmds) }, + { blt_cmds, ARRAY_SIZE(blt_cmds) }, +}; + static u32 gen7_render_get_cmd_length_mask(u32 cmd_header) { u32 client = (cmd_header & INSTR_CLIENT_MASK) >> INSTR_CLIENT_SHIFT; @@ -200,15 +342,30 @@ void i915_cmd_parser_init_ring(struct intel_ring_buffer *ring) switch (ring->id) { case RCS: + if (IS_HASWELL(ring->dev)) { + ring->cmd_tables = hsw_render_ring_cmds; + ring->cmd_table_count = + ARRAY_SIZE(hsw_render_ring_cmds); + } else { + ring->cmd_tables = gen7_render_cmds; + ring->cmd_table_count = ARRAY_SIZE(gen7_render_cmds); + } + ring->get_cmd_length_mask = gen7_render_get_cmd_length_mask; break; case VCS: + ring->cmd_tables = gen7_video_cmds; + ring->cmd_table_count = ARRAY_SIZE(gen7_video_cmds); ring->get_cmd_length_mask = gen7_bsd_get_cmd_length_mask; break; case BCS: + ring->cmd_tables = gen7_blt_cmds; + ring->cmd_table_count = ARRAY_SIZE(gen7_blt_cmds); ring->get_cmd_length_mask = gen7_blt_get_cmd_length_mask; break; case VECS: + ring->cmd_tables = hsw_vebox_cmds; + ring->cmd_table_count = ARRAY_SIZE(hsw_vebox_cmds); /* VECS can use the same length_mask function as VCS */ ring->get_cmd_length_mask = gen7_bsd_get_cmd_length_mask; break; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 085db1b089c1..e492bc94dc67 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -348,6 +348,52 @@ #define PIPE_CONTROL_DEPTH_CACHE_FLUSH (1<<0) #define PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */ +/* + * Commands used only by the command parser + */ +#define MI_SET_PREDICATE MI_INSTR(0x01, 0) +#define MI_ARB_CHECK MI_INSTR(0x05, 0) +#define MI_RS_CONTROL MI_INSTR(0x06, 0) +#define MI_URB_ATOMIC_ALLOC MI_INSTR(0x09, 0) +#define MI_PREDICATE MI_INSTR(0x0C, 0) +#define MI_RS_CONTEXT MI_INSTR(0x0F, 0) +#define MI_TOPOLOGY_FILTER MI_INSTR(0x0D, 0) +#define MI_URB_CLEAR MI_INSTR(0x19, 0) +#define MI_UPDATE_GTT MI_INSTR(0x23, 0) +#define MI_CLFLUSH MI_INSTR(0x27, 0) +#define MI_LOAD_REGISTER_MEM MI_INSTR(0x29, 0) +#define MI_LOAD_REGISTER_REG MI_INSTR(0x2A, 0) +#define MI_RS_STORE_DATA_IMM MI_INSTR(0x2B, 0) +#define MI_LOAD_URB_MEM MI_INSTR(0x2C, 0) +#define MI_STORE_URB_MEM MI_INSTR(0x2D, 0) +#define MI_CONDITIONAL_BATCH_BUFFER_END MI_INSTR(0x36, 0) + +#define PIPELINE_SELECT ((0x3<<29)|(0x1<<27)|(0x1<<24)|(0x4<<16)) +#define GFX_OP_3DSTATE_VF_STATISTICS ((0x3<<29)|(0x1<<27)|(0x0<<24)|(0xB<<16)) +#define GPGPU_OBJECT ((0x3<<29)|(0x2<<27)|(0x1<<24)|(0x4<<16)) +#define GPGPU_WALKER ((0x3<<29)|(0x2<<27)|(0x1<<24)|(0x5<<16)) +#define GFX_OP_3DSTATE_DX9_CONSTANTF_VS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x39<<16)) +#define GFX_OP_3DSTATE_DX9_CONSTANTF_PS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x3A<<16)) +#define GFX_OP_3DSTATE_SO_DECL_LIST \ + ((0x3<<29)|(0x3<<27)|(0x1<<24)|(0x17<<16)) + +#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_VS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x43<<16)) +#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_GS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x44<<16)) +#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_HS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x45<<16)) +#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_DS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x46<<16)) +#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_PS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x47<<16)) + +#define MFX_WAIT ((0x3<<29)|(0x1<<27)|(0x0<<16)) + +#define COLOR_BLT ((0x2<<29)|(0x40<<22)) +#define SRC_COPY_BLT ((0x2<<29)|(0x43<<22)) /* * Reset registers -- cgit v1.2.3 From 9c640d1d5132d8f3c699c62170dbfb6928ff8d96 Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Tue, 18 Feb 2014 10:15:48 -0800 Subject: drm/i915: Reject privileged commands The spec defines most of these commands as privileged. A few others, like the semaphore mbox command and some display commands, are also reserved for the driver's use. Subsequent patches relax some of these restrictions. v2: Rebased Signed-off-by: Brad Volkin Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 54 ++++++++++++++++++++++++---------- drivers/gpu/drm/i915/i915_reg.h | 1 + 2 files changed, 39 insertions(+), 16 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index d0f9a6fb7ba3..717aa693b3c8 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -116,27 +116,27 @@ static const struct drm_i915_cmd_descriptor common_cmds[] = { CMD( MI_NOOP, SMI, F, 1, S ), CMD( MI_USER_INTERRUPT, SMI, F, 1, S ), - CMD( MI_WAIT_FOR_EVENT, SMI, F, 1, S ), + CMD( MI_WAIT_FOR_EVENT, SMI, F, 1, R ), CMD( MI_ARB_CHECK, SMI, F, 1, S ), CMD( MI_REPORT_HEAD, SMI, F, 1, S ), CMD( MI_SUSPEND_FLUSH, SMI, F, 1, S ), - CMD( MI_SEMAPHORE_MBOX, SMI, !F, 0xFF, S ), - CMD( MI_STORE_DWORD_INDEX, SMI, !F, 0xFF, S ), - CMD( MI_LOAD_REGISTER_IMM(1), SMI, !F, 0xFF, S ), - CMD( MI_STORE_REGISTER_MEM(1), SMI, !F, 0xFF, S ), - CMD( MI_LOAD_REGISTER_MEM, SMI, !F, 0xFF, S ), + CMD( MI_SEMAPHORE_MBOX, SMI, !F, 0xFF, R ), + CMD( MI_STORE_DWORD_INDEX, SMI, !F, 0xFF, R ), + CMD( MI_LOAD_REGISTER_IMM(1), SMI, !F, 0xFF, R ), + CMD( MI_STORE_REGISTER_MEM(1), SMI, !F, 0xFF, R ), + CMD( MI_LOAD_REGISTER_MEM, SMI, !F, 0xFF, R ), CMD( MI_BATCH_BUFFER_START, SMI, !F, 0xFF, S ), }; static const struct drm_i915_cmd_descriptor render_cmds[] = { CMD( MI_FLUSH, SMI, F, 1, S ), - CMD( MI_ARB_ON_OFF, SMI, F, 1, S ), + CMD( MI_ARB_ON_OFF, SMI, F, 1, R ), CMD( MI_PREDICATE, SMI, F, 1, S ), CMD( MI_TOPOLOGY_FILTER, SMI, F, 1, S ), - CMD( MI_DISPLAY_FLIP, SMI, !F, 0xFF, S ), - CMD( MI_SET_CONTEXT, SMI, !F, 0xFF, S ), + CMD( MI_DISPLAY_FLIP, SMI, !F, 0xFF, R ), + CMD( MI_SET_CONTEXT, SMI, !F, 0xFF, R ), CMD( MI_URB_CLEAR, SMI, !F, 0xFF, S ), - CMD( MI_UPDATE_GTT, SMI, !F, 0xFF, S ), + CMD( MI_UPDATE_GTT, SMI, !F, 0xFF, R ), CMD( MI_CLFLUSH, SMI, !F, 0x3FF, S ), CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ), CMD( GFX_OP_3DSTATE_VF_STATISTICS, S3D, F, 1, S ), @@ -151,7 +151,9 @@ static const struct drm_i915_cmd_descriptor hsw_render_cmds[] = { CMD( MI_RS_CONTROL, SMI, F, 1, S ), CMD( MI_URB_ATOMIC_ALLOC, SMI, F, 1, S ), CMD( MI_RS_CONTEXT, SMI, F, 1, S ), - CMD( MI_LOAD_REGISTER_REG, SMI, !F, 0xFF, S ), + CMD( MI_LOAD_SCAN_LINES_INCL, SMI, !F, 0x3F, R ), + CMD( MI_LOAD_SCAN_LINES_EXCL, SMI, !F, 0x3F, R ), + CMD( MI_LOAD_REGISTER_REG, SMI, !F, 0xFF, R ), CMD( MI_RS_STORE_DATA_IMM, SMI, !F, 0xFF, S ), CMD( MI_LOAD_URB_MEM, SMI, !F, 0xFF, S ), CMD( MI_STORE_URB_MEM, SMI, !F, 0xFF, S ), @@ -166,8 +168,9 @@ static const struct drm_i915_cmd_descriptor hsw_render_cmds[] = { }; static const struct drm_i915_cmd_descriptor video_cmds[] = { - CMD( MI_ARB_ON_OFF, SMI, F, 1, S ), + CMD( MI_ARB_ON_OFF, SMI, F, 1, R ), CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, S ), + CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ), CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ), /* * MFX_WAIT doesn't fit the way we handle length for most commands. @@ -178,18 +181,25 @@ static const struct drm_i915_cmd_descriptor video_cmds[] = { }; static const struct drm_i915_cmd_descriptor vecs_cmds[] = { - CMD( MI_ARB_ON_OFF, SMI, F, 1, S ), + CMD( MI_ARB_ON_OFF, SMI, F, 1, R ), CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, S ), + CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ), CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ), }; static const struct drm_i915_cmd_descriptor blt_cmds[] = { - CMD( MI_DISPLAY_FLIP, SMI, !F, 0xFF, S ), + CMD( MI_DISPLAY_FLIP, SMI, !F, 0xFF, R ), CMD( MI_STORE_DWORD_IMM, SMI, !F, 0x3FF, S ), + CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ), CMD( COLOR_BLT, S2D, !F, 0x3F, S ), CMD( SRC_COPY_BLT, S2D, !F, 0x3F, S ), }; +static const struct drm_i915_cmd_descriptor hsw_blt_cmds[] = { + CMD( MI_LOAD_SCAN_LINES_INCL, SMI, !F, 0x3F, R ), + CMD( MI_LOAD_SCAN_LINES_EXCL, SMI, !F, 0x3F, R ), +}; + #undef CMD #undef SMI #undef S3D @@ -228,6 +238,12 @@ static const struct drm_i915_cmd_table gen7_blt_cmds[] = { { blt_cmds, ARRAY_SIZE(blt_cmds) }, }; +static const struct drm_i915_cmd_table hsw_blt_ring_cmds[] = { + { common_cmds, ARRAY_SIZE(common_cmds) }, + { blt_cmds, ARRAY_SIZE(blt_cmds) }, + { hsw_blt_cmds, ARRAY_SIZE(hsw_blt_cmds) }, +}; + static u32 gen7_render_get_cmd_length_mask(u32 cmd_header) { u32 client = (cmd_header & INSTR_CLIENT_MASK) >> INSTR_CLIENT_SHIFT; @@ -359,8 +375,14 @@ void i915_cmd_parser_init_ring(struct intel_ring_buffer *ring) ring->get_cmd_length_mask = gen7_bsd_get_cmd_length_mask; break; case BCS: - ring->cmd_tables = gen7_blt_cmds; - ring->cmd_table_count = ARRAY_SIZE(gen7_blt_cmds); + if (IS_HASWELL(ring->dev)) { + ring->cmd_tables = hsw_blt_ring_cmds; + ring->cmd_table_count = ARRAY_SIZE(hsw_blt_ring_cmds); + } else { + ring->cmd_tables = gen7_blt_cmds; + ring->cmd_table_count = ARRAY_SIZE(gen7_blt_cmds); + } + ring->get_cmd_length_mask = gen7_blt_get_cmd_length_mask; break; case VECS: diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index e492bc94dc67..82ce432de7bc 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -358,6 +358,7 @@ #define MI_PREDICATE MI_INSTR(0x0C, 0) #define MI_RS_CONTEXT MI_INSTR(0x0F, 0) #define MI_TOPOLOGY_FILTER MI_INSTR(0x0D, 0) +#define MI_LOAD_SCAN_LINES_EXCL MI_INSTR(0x13, 0) #define MI_URB_CLEAR MI_INSTR(0x19, 0) #define MI_UPDATE_GTT MI_INSTR(0x23, 0) #define MI_CLFLUSH MI_INSTR(0x27, 0) -- cgit v1.2.3 From 17c1eb15b02e864547e758fe92e400b3d62a2631 Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Tue, 18 Feb 2014 10:15:49 -0800 Subject: drm/i915: Allow some privileged commands from master The Intel DDX uses these to implement scanline waits in the X server. Signed-off-by: Brad Volkin Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index 717aa693b3c8..7b80a84345a0 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -116,7 +116,7 @@ static const struct drm_i915_cmd_descriptor common_cmds[] = { CMD( MI_NOOP, SMI, F, 1, S ), CMD( MI_USER_INTERRUPT, SMI, F, 1, S ), - CMD( MI_WAIT_FOR_EVENT, SMI, F, 1, R ), + CMD( MI_WAIT_FOR_EVENT, SMI, F, 1, M ), CMD( MI_ARB_CHECK, SMI, F, 1, S ), CMD( MI_REPORT_HEAD, SMI, F, 1, S ), CMD( MI_SUSPEND_FLUSH, SMI, F, 1, S ), @@ -151,7 +151,7 @@ static const struct drm_i915_cmd_descriptor hsw_render_cmds[] = { CMD( MI_RS_CONTROL, SMI, F, 1, S ), CMD( MI_URB_ATOMIC_ALLOC, SMI, F, 1, S ), CMD( MI_RS_CONTEXT, SMI, F, 1, S ), - CMD( MI_LOAD_SCAN_LINES_INCL, SMI, !F, 0x3F, R ), + CMD( MI_LOAD_SCAN_LINES_INCL, SMI, !F, 0x3F, M ), CMD( MI_LOAD_SCAN_LINES_EXCL, SMI, !F, 0x3F, R ), CMD( MI_LOAD_REGISTER_REG, SMI, !F, 0xFF, R ), CMD( MI_RS_STORE_DATA_IMM, SMI, !F, 0xFF, S ), @@ -196,7 +196,7 @@ static const struct drm_i915_cmd_descriptor blt_cmds[] = { }; static const struct drm_i915_cmd_descriptor hsw_blt_cmds[] = { - CMD( MI_LOAD_SCAN_LINES_INCL, SMI, !F, 0x3F, R ), + CMD( MI_LOAD_SCAN_LINES_INCL, SMI, !F, 0x3F, M ), CMD( MI_LOAD_SCAN_LINES_EXCL, SMI, !F, 0x3F, R ), }; -- cgit v1.2.3 From 5947de9b46d472f9596f77bb5a1655c0d6c99f7e Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Tue, 18 Feb 2014 10:15:50 -0800 Subject: drm/i915: Add register whitelists for mesa These registers are currently used by mesa for blitting, transform feedback extensions, and performance monitoring extensions. v2: REG64 macro Signed-off-by: Brad Volkin Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 45 ++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/i915_reg.h | 20 +++++++++++++++ 2 files changed, 65 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index 7b80a84345a0..7249b512571d 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -244,6 +244,45 @@ static const struct drm_i915_cmd_table hsw_blt_ring_cmds[] = { { hsw_blt_cmds, ARRAY_SIZE(hsw_blt_cmds) }, }; +/* + * Register whitelists, sorted by increasing register offset. + * + * Some registers that userspace accesses are 64 bits. The register + * access commands only allow 32-bit accesses. Hence, we have to include + * entries for both halves of the 64-bit registers. + */ + +/* Convenience macro for adding 64-bit registers */ +#define REG64(addr) (addr), (addr + sizeof(u32)) + +static const u32 gen7_render_regs[] = { + REG64(HS_INVOCATION_COUNT), + REG64(DS_INVOCATION_COUNT), + REG64(IA_VERTICES_COUNT), + REG64(IA_PRIMITIVES_COUNT), + REG64(VS_INVOCATION_COUNT), + REG64(GS_INVOCATION_COUNT), + REG64(GS_PRIMITIVES_COUNT), + REG64(CL_INVOCATION_COUNT), + REG64(CL_PRIMITIVES_COUNT), + REG64(PS_INVOCATION_COUNT), + REG64(PS_DEPTH_COUNT), + REG64(GEN7_SO_NUM_PRIMS_WRITTEN(0)), + REG64(GEN7_SO_NUM_PRIMS_WRITTEN(1)), + REG64(GEN7_SO_NUM_PRIMS_WRITTEN(2)), + REG64(GEN7_SO_NUM_PRIMS_WRITTEN(3)), + GEN7_SO_WRITE_OFFSET(0), + GEN7_SO_WRITE_OFFSET(1), + GEN7_SO_WRITE_OFFSET(2), + GEN7_SO_WRITE_OFFSET(3), +}; + +static const u32 gen7_blt_regs[] = { + BCS_SWCTRL, +}; + +#undef REG64 + static u32 gen7_render_get_cmd_length_mask(u32 cmd_header) { u32 client = (cmd_header & INSTR_CLIENT_MASK) >> INSTR_CLIENT_SHIFT; @@ -367,6 +406,9 @@ void i915_cmd_parser_init_ring(struct intel_ring_buffer *ring) ring->cmd_table_count = ARRAY_SIZE(gen7_render_cmds); } + ring->reg_table = gen7_render_regs; + ring->reg_count = ARRAY_SIZE(gen7_render_regs); + ring->get_cmd_length_mask = gen7_render_get_cmd_length_mask; break; case VCS: @@ -383,6 +425,9 @@ void i915_cmd_parser_init_ring(struct intel_ring_buffer *ring) ring->cmd_table_count = ARRAY_SIZE(gen7_blt_cmds); } + ring->reg_table = gen7_blt_regs; + ring->reg_count = ARRAY_SIZE(gen7_blt_regs); + ring->get_cmd_length_mask = gen7_blt_get_cmd_length_mask; break; case VECS: diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 82ce432de7bc..6247843914c8 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -396,6 +396,26 @@ #define COLOR_BLT ((0x2<<29)|(0x40<<22)) #define SRC_COPY_BLT ((0x2<<29)|(0x43<<22)) +/* + * Registers used only by the command parser + */ +#define BCS_SWCTRL 0x22200 + +#define HS_INVOCATION_COUNT 0x2300 +#define DS_INVOCATION_COUNT 0x2308 +#define IA_VERTICES_COUNT 0x2310 +#define IA_PRIMITIVES_COUNT 0x2318 +#define VS_INVOCATION_COUNT 0x2320 +#define GS_INVOCATION_COUNT 0x2328 +#define GS_PRIMITIVES_COUNT 0x2330 +#define CL_INVOCATION_COUNT 0x2338 +#define CL_PRIMITIVES_COUNT 0x2340 +#define PS_INVOCATION_COUNT 0x2348 +#define PS_DEPTH_COUNT 0x2350 + +/* There are the 4 64-bit counter registers, one for each stream output */ +#define GEN7_SO_NUM_PRIMS_WRITTEN(n) (0x5200 + (n) * 8) + /* * Reset registers */ -- cgit v1.2.3 From 220375aa12c95744cd71d236f7c1ee39d277b6ed Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Tue, 18 Feb 2014 10:15:51 -0800 Subject: drm/i915: Add register whitelist for DRM master These are used to implement scanline waits in the X server. v2: Use #defines instead of magic numbers Signed-off-by: Brad Volkin Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 29 +++++++++++++++++++++++++++++ drivers/gpu/drm/i915/i915_reg.h | 6 ++++++ 2 files changed, 35 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index 7249b512571d..0182c7cee32a 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -281,6 +281,19 @@ static const u32 gen7_blt_regs[] = { BCS_SWCTRL, }; +static const u32 ivb_master_regs[] = { + FORCEWAKE_MT, + DERRMR, + GEN7_PIPE_DE_LOAD_SL(PIPE_A), + GEN7_PIPE_DE_LOAD_SL(PIPE_B), + GEN7_PIPE_DE_LOAD_SL(PIPE_C), +}; + +static const u32 hsw_master_regs[] = { + FORCEWAKE_MT, + DERRMR, +}; + #undef REG64 static u32 gen7_render_get_cmd_length_mask(u32 cmd_header) @@ -409,6 +422,14 @@ void i915_cmd_parser_init_ring(struct intel_ring_buffer *ring) ring->reg_table = gen7_render_regs; ring->reg_count = ARRAY_SIZE(gen7_render_regs); + if (IS_HASWELL(ring->dev)) { + ring->master_reg_table = hsw_master_regs; + ring->master_reg_count = ARRAY_SIZE(hsw_master_regs); + } else { + ring->master_reg_table = ivb_master_regs; + ring->master_reg_count = ARRAY_SIZE(ivb_master_regs); + } + ring->get_cmd_length_mask = gen7_render_get_cmd_length_mask; break; case VCS: @@ -428,6 +449,14 @@ void i915_cmd_parser_init_ring(struct intel_ring_buffer *ring) ring->reg_table = gen7_blt_regs; ring->reg_count = ARRAY_SIZE(gen7_blt_regs); + if (IS_HASWELL(ring->dev)) { + ring->master_reg_table = hsw_master_regs; + ring->master_reg_count = ARRAY_SIZE(hsw_master_regs); + } else { + ring->master_reg_table = ivb_master_regs; + ring->master_reg_count = ARRAY_SIZE(ivb_master_regs); + } + ring->get_cmd_length_mask = gen7_blt_get_cmd_length_mask; break; case VECS: diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 6247843914c8..d90171bd14dc 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -416,6 +416,12 @@ /* There are the 4 64-bit counter registers, one for each stream output */ #define GEN7_SO_NUM_PRIMS_WRITTEN(n) (0x5200 + (n) * 8) +#define _GEN7_PIPEA_DE_LOAD_SL 0x70068 +#define _GEN7_PIPEB_DE_LOAD_SL 0x71068 +#define GEN7_PIPE_DE_LOAD_SL(pipe) _PIPE(pipe, \ + _GEN7_PIPEA_DE_LOAD_SL, \ + _GEN7_PIPEB_DE_LOAD_SL) + /* * Reset registers */ -- cgit v1.2.3 From f0a346bdafaf6fc4a51df9ddf1548fd888f860d8 Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Tue, 18 Feb 2014 10:15:52 -0800 Subject: drm/i915: Enable register whitelist checks MI_STORE_REGISTER_MEM, MI_LOAD_REGISTER_MEM, and MI_LOAD_REGISTER_IMM commands allow userspace access to registers. Only certain registers should be allowed for such access, so enable checking for those commands. Each ring gets its own register whitelist. MI_LOAD_REGISTER_REG on HSW also allows register access but is currently unused by userspace components. Leave it rejected. PIPE_CONTROL and MEDIA_VFE_STATE allow register access based on certain bits being set. Reject those as well. v2: trailing commas, rebased OTC-Tracker: AXIA-4631 Change-Id: Ie614a2f0eb2e5917de809e5a17957175d24cc44f Signed-off-by: Brad Volkin Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 21 ++++++++++++++++++--- drivers/gpu/drm/i915/i915_reg.h | 3 +++ 2 files changed, 21 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index 0182c7cee32a..1c313090efdc 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -122,9 +122,12 @@ static const struct drm_i915_cmd_descriptor common_cmds[] = { CMD( MI_SUSPEND_FLUSH, SMI, F, 1, S ), CMD( MI_SEMAPHORE_MBOX, SMI, !F, 0xFF, R ), CMD( MI_STORE_DWORD_INDEX, SMI, !F, 0xFF, R ), - CMD( MI_LOAD_REGISTER_IMM(1), SMI, !F, 0xFF, R ), - CMD( MI_STORE_REGISTER_MEM(1), SMI, !F, 0xFF, R ), - CMD( MI_LOAD_REGISTER_MEM, SMI, !F, 0xFF, R ), + CMD( MI_LOAD_REGISTER_IMM(1), SMI, !F, 0xFF, W, + .reg = { .offset = 1, .mask = 0x007FFFFC } ), + CMD( MI_STORE_REGISTER_MEM(1), SMI, !F, 0xFF, W, + .reg = { .offset = 1, .mask = 0x007FFFFC } ), + CMD( MI_LOAD_REGISTER_MEM, SMI, !F, 0xFF, W, + .reg = { .offset = 1, .mask = 0x007FFFFC } ), CMD( MI_BATCH_BUFFER_START, SMI, !F, 0xFF, S ), }; @@ -141,9 +144,21 @@ static const struct drm_i915_cmd_descriptor render_cmds[] = { CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ), CMD( GFX_OP_3DSTATE_VF_STATISTICS, S3D, F, 1, S ), CMD( PIPELINE_SELECT, S3D, F, 1, S ), + CMD( MEDIA_VFE_STATE, S3D, !F, 0xFFFF, B, + .bits = {{ + .offset = 2, + .mask = MEDIA_VFE_STATE_MMIO_ACCESS_MASK, + .expected = 0, + }}, ), CMD( GPGPU_OBJECT, S3D, !F, 0xFF, S ), CMD( GPGPU_WALKER, S3D, !F, 0xFF, S ), CMD( GFX_OP_3DSTATE_SO_DECL_LIST, S3D, !F, 0x1FF, S ), + CMD( GFX_OP_PIPE_CONTROL(5), S3D, !F, 0xFF, B, + .bits = {{ + .offset = 1, + .mask = PIPE_CONTROL_MMIO_WRITE, + .expected = 0, + }}, ), }; static const struct drm_i915_cmd_descriptor hsw_render_cmds[] = { diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index d90171bd14dc..cfaeaf5b90bd 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -331,6 +331,7 @@ #define DISPLAY_PLANE_B (1<<20) #define GFX_OP_PIPE_CONTROL(len) ((0x3<<29)|(0x3<<27)|(0x2<<24)|(len-2)) #define PIPE_CONTROL_GLOBAL_GTT_IVB (1<<24) /* gen7+ */ +#define PIPE_CONTROL_MMIO_WRITE (1<<23) #define PIPE_CONTROL_CS_STALL (1<<20) #define PIPE_CONTROL_TLB_INVALIDATE (1<<18) #define PIPE_CONTROL_QW_WRITE (1<<14) @@ -371,6 +372,8 @@ #define PIPELINE_SELECT ((0x3<<29)|(0x1<<27)|(0x1<<24)|(0x4<<16)) #define GFX_OP_3DSTATE_VF_STATISTICS ((0x3<<29)|(0x1<<27)|(0x0<<24)|(0xB<<16)) +#define MEDIA_VFE_STATE ((0x3<<29)|(0x2<<27)|(0x0<<24)|(0x0<<16)) +#define MEDIA_VFE_STATE_MMIO_ACCESS_MASK (0x18) #define GPGPU_OBJECT ((0x3<<29)|(0x2<<27)|(0x1<<24)|(0x4<<16)) #define GPGPU_WALKER ((0x3<<29)|(0x2<<27)|(0x1<<24)|(0x5<<16)) #define GFX_OP_3DSTATE_DX9_CONSTANTF_VS \ -- cgit v1.2.3 From b18b396b3a9a7f2a468bbcefa0ae09451b5ec832 Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Tue, 18 Feb 2014 10:15:53 -0800 Subject: drm/i915: Reject commands that explicitly generate interrupts The driver leaves most interrupts masked during normal operation, so there would have to be additional work to enable userspace to safely request/receive an interrupt. v2: trailing commas, rebased Signed-off-by: Brad Volkin Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 22 ++++++++++++++++++++-- drivers/gpu/drm/i915/i915_reg.h | 1 + 2 files changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index 1c313090efdc..d0e3fec73d3e 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -115,7 +115,7 @@ ---------------------------------------------------------- */ static const struct drm_i915_cmd_descriptor common_cmds[] = { CMD( MI_NOOP, SMI, F, 1, S ), - CMD( MI_USER_INTERRUPT, SMI, F, 1, S ), + CMD( MI_USER_INTERRUPT, SMI, F, 1, R ), CMD( MI_WAIT_FOR_EVENT, SMI, F, 1, M ), CMD( MI_ARB_CHECK, SMI, F, 1, S ), CMD( MI_REPORT_HEAD, SMI, F, 1, S ), @@ -156,7 +156,7 @@ static const struct drm_i915_cmd_descriptor render_cmds[] = { CMD( GFX_OP_PIPE_CONTROL(5), S3D, !F, 0xFF, B, .bits = {{ .offset = 1, - .mask = PIPE_CONTROL_MMIO_WRITE, + .mask = (PIPE_CONTROL_MMIO_WRITE | PIPE_CONTROL_NOTIFY), .expected = 0, }}, ), }; @@ -186,6 +186,12 @@ static const struct drm_i915_cmd_descriptor video_cmds[] = { CMD( MI_ARB_ON_OFF, SMI, F, 1, R ), CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, S ), CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ), + CMD( MI_FLUSH_DW, SMI, !F, 0x3F, B, + .bits = {{ + .offset = 0, + .mask = MI_FLUSH_DW_NOTIFY, + .expected = 0, + }}, ), CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ), /* * MFX_WAIT doesn't fit the way we handle length for most commands. @@ -199,6 +205,12 @@ static const struct drm_i915_cmd_descriptor vecs_cmds[] = { CMD( MI_ARB_ON_OFF, SMI, F, 1, R ), CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, S ), CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ), + CMD( MI_FLUSH_DW, SMI, !F, 0x3F, B, + .bits = {{ + .offset = 0, + .mask = MI_FLUSH_DW_NOTIFY, + .expected = 0, + }}, ), CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ), }; @@ -206,6 +218,12 @@ static const struct drm_i915_cmd_descriptor blt_cmds[] = { CMD( MI_DISPLAY_FLIP, SMI, !F, 0xFF, R ), CMD( MI_STORE_DWORD_IMM, SMI, !F, 0x3FF, S ), CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ), + CMD( MI_FLUSH_DW, SMI, !F, 0x3F, B, + .bits = {{ + .offset = 0, + .mask = MI_FLUSH_DW_NOTIFY, + .expected = 0, + }}, ), CMD( COLOR_BLT, S2D, !F, 0x3F, S ), CMD( SRC_COPY_BLT, S2D, !F, 0x3F, S ), }; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index cfaeaf5b90bd..450a08bad7ae 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -270,6 +270,7 @@ #define MI_FLUSH_DW_STORE_INDEX (1<<21) #define MI_INVALIDATE_TLB (1<<18) #define MI_FLUSH_DW_OP_STOREDW (1<<14) +#define MI_FLUSH_DW_NOTIFY (1<<8) #define MI_INVALIDATE_BSD (1<<7) #define MI_FLUSH_DW_USE_GTT (1<<2) #define MI_FLUSH_DW_USE_PPGTT (0<<2) -- cgit v1.2.3 From d4d4803513af986a5280d810e093cd2bc2e71d88 Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Tue, 18 Feb 2014 10:15:54 -0800 Subject: drm/i915: Enable PPGTT command parser checks Various commands that access memory have a bit to determine whether the graphics address specified in the command should use the GGTT or PPGTT for translation. These checks ensure that the bit indicates PPGTT translation. Most of these checks use the existing bit-checking infrastructure. The PIPE_CONTROL and MI_FLUSH_DW commands, however, are multi-function commands. The GGTT/PPGTT bit is only relevant for certain uses of the command. As such, this change also extends the bit-checking code to include a "condition" mask and offset. If the condition mask is non-zero then the parser only performs the bit check when the bits specified by the condition mask/offset are also non-zero. NOTE: At this point in the series PPGTT must be enabled for the parser to work correctly. If it's not enabled, userspace will not be setting the PPGTT bits the way the parser requires. VLV is the only platform where this is a problem, so at this point, we disable parsing for VLV. v2: whitespace and trailing commas fixes, rebased OTC-Tracker: AXIA-4631 Change-Id: I3f4c76b6734f1956ec47e698230f97d0998ff92b Signed-off-by: Brad Volkin Reviewed-by: Jani Nikula [danvet: Drop the unecessary cast Jani spotted.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 127 ++++++++++++++++++++++++++++++--- drivers/gpu/drm/i915/i915_drv.h | 6 ++ drivers/gpu/drm/i915/i915_reg.h | 6 ++ 3 files changed, 128 insertions(+), 11 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index d0e3fec73d3e..bf4ffd8826ba 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -124,10 +124,20 @@ static const struct drm_i915_cmd_descriptor common_cmds[] = { CMD( MI_STORE_DWORD_INDEX, SMI, !F, 0xFF, R ), CMD( MI_LOAD_REGISTER_IMM(1), SMI, !F, 0xFF, W, .reg = { .offset = 1, .mask = 0x007FFFFC } ), - CMD( MI_STORE_REGISTER_MEM(1), SMI, !F, 0xFF, W, - .reg = { .offset = 1, .mask = 0x007FFFFC } ), - CMD( MI_LOAD_REGISTER_MEM, SMI, !F, 0xFF, W, - .reg = { .offset = 1, .mask = 0x007FFFFC } ), + CMD( MI_STORE_REGISTER_MEM(1), SMI, !F, 0xFF, W | B, + .reg = { .offset = 1, .mask = 0x007FFFFC }, + .bits = {{ + .offset = 0, + .mask = MI_GLOBAL_GTT, + .expected = 0, + }}, ), + CMD( MI_LOAD_REGISTER_MEM, SMI, !F, 0xFF, W | B, + .reg = { .offset = 1, .mask = 0x007FFFFC }, + .bits = {{ + .offset = 0, + .mask = MI_GLOBAL_GTT, + .expected = 0, + }}, ), CMD( MI_BATCH_BUFFER_START, SMI, !F, 0xFF, S ), }; @@ -139,9 +149,31 @@ static const struct drm_i915_cmd_descriptor render_cmds[] = { CMD( MI_DISPLAY_FLIP, SMI, !F, 0xFF, R ), CMD( MI_SET_CONTEXT, SMI, !F, 0xFF, R ), CMD( MI_URB_CLEAR, SMI, !F, 0xFF, S ), + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0x3F, B, + .bits = {{ + .offset = 0, + .mask = MI_GLOBAL_GTT, + .expected = 0, + }}, ), CMD( MI_UPDATE_GTT, SMI, !F, 0xFF, R ), - CMD( MI_CLFLUSH, SMI, !F, 0x3FF, S ), - CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ), + CMD( MI_CLFLUSH, SMI, !F, 0x3FF, B, + .bits = {{ + .offset = 0, + .mask = MI_GLOBAL_GTT, + .expected = 0, + }}, ), + CMD( MI_REPORT_PERF_COUNT, SMI, !F, 0x3F, B, + .bits = {{ + .offset = 1, + .mask = MI_REPORT_PERF_COUNT_GGTT, + .expected = 0, + }}, ), + CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, B, + .bits = {{ + .offset = 0, + .mask = MI_GLOBAL_GTT, + .expected = 0, + }}, ), CMD( GFX_OP_3DSTATE_VF_STATISTICS, S3D, F, 1, S ), CMD( PIPELINE_SELECT, S3D, F, 1, S ), CMD( MEDIA_VFE_STATE, S3D, !F, 0xFFFF, B, @@ -158,6 +190,13 @@ static const struct drm_i915_cmd_descriptor render_cmds[] = { .offset = 1, .mask = (PIPE_CONTROL_MMIO_WRITE | PIPE_CONTROL_NOTIFY), .expected = 0, + }, + { + .offset = 1, + .mask = PIPE_CONTROL_GLOBAL_GTT_IVB, + .expected = 0, + .condition_offset = 1, + .condition_mask = PIPE_CONTROL_POST_SYNC_OP_MASK, }}, ), }; @@ -184,15 +223,32 @@ static const struct drm_i915_cmd_descriptor hsw_render_cmds[] = { static const struct drm_i915_cmd_descriptor video_cmds[] = { CMD( MI_ARB_ON_OFF, SMI, F, 1, R ), - CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, S ), + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, B, + .bits = {{ + .offset = 0, + .mask = MI_GLOBAL_GTT, + .expected = 0, + }}, ), CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ), CMD( MI_FLUSH_DW, SMI, !F, 0x3F, B, .bits = {{ .offset = 0, .mask = MI_FLUSH_DW_NOTIFY, .expected = 0, + }, + { + .offset = 1, + .mask = MI_FLUSH_DW_USE_GTT, + .expected = 0, + .condition_offset = 0, + .condition_mask = MI_FLUSH_DW_OP_MASK, + }}, ), + CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, B, + .bits = {{ + .offset = 0, + .mask = MI_GLOBAL_GTT, + .expected = 0, }}, ), - CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ), /* * MFX_WAIT doesn't fit the way we handle length for most commands. * It has a length field but it uses a non-standard length bias. @@ -203,26 +259,55 @@ static const struct drm_i915_cmd_descriptor video_cmds[] = { static const struct drm_i915_cmd_descriptor vecs_cmds[] = { CMD( MI_ARB_ON_OFF, SMI, F, 1, R ), - CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, S ), + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0xFF, B, + .bits = {{ + .offset = 0, + .mask = MI_GLOBAL_GTT, + .expected = 0, + }}, ), CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ), CMD( MI_FLUSH_DW, SMI, !F, 0x3F, B, .bits = {{ .offset = 0, .mask = MI_FLUSH_DW_NOTIFY, .expected = 0, + }, + { + .offset = 1, + .mask = MI_FLUSH_DW_USE_GTT, + .expected = 0, + .condition_offset = 0, + .condition_mask = MI_FLUSH_DW_OP_MASK, + }}, ), + CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, B, + .bits = {{ + .offset = 0, + .mask = MI_GLOBAL_GTT, + .expected = 0, }}, ), - CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, S ), }; static const struct drm_i915_cmd_descriptor blt_cmds[] = { CMD( MI_DISPLAY_FLIP, SMI, !F, 0xFF, R ), - CMD( MI_STORE_DWORD_IMM, SMI, !F, 0x3FF, S ), + CMD( MI_STORE_DWORD_IMM, SMI, !F, 0x3FF, B, + .bits = {{ + .offset = 0, + .mask = MI_GLOBAL_GTT, + .expected = 0, + }}, ), CMD( MI_UPDATE_GTT, SMI, !F, 0x3F, R ), CMD( MI_FLUSH_DW, SMI, !F, 0x3F, B, .bits = {{ .offset = 0, .mask = MI_FLUSH_DW_NOTIFY, .expected = 0, + }, + { + .offset = 1, + .mask = MI_FLUSH_DW_USE_GTT, + .expected = 0, + .condition_offset = 0, + .condition_mask = MI_FLUSH_DW_OP_MASK, }}, ), CMD( COLOR_BLT, S2D, !F, 0x3F, S ), CMD( SRC_COPY_BLT, S2D, !F, 0x3F, S ), @@ -617,10 +702,20 @@ finish: */ bool i915_needs_cmd_parser(struct intel_ring_buffer *ring) { + drm_i915_private_t *dev_priv = ring->dev->dev_private; + /* No command tables indicates a platform without parsing */ if (!ring->cmd_tables) return false; + /* + * XXX: VLV is Gen7 and therefore has cmd_tables, but has PPGTT + * disabled. That will cause all of the parser's PPGTT checks to + * fail. For now, disable parsing when PPGTT is off. + */ + if (!dev_priv->mm.aliasing_ppgtt) + return false; + return (i915.enable_cmd_parser == 1); } @@ -737,6 +832,16 @@ int i915_parse_cmds(struct intel_ring_buffer *ring, if (desc->bits[i].mask == 0) break; + if (desc->bits[i].condition_mask != 0) { + u32 offset = + desc->bits[i].condition_offset; + u32 condition = cmd[offset] & + desc->bits[i].condition_mask; + + if (condition == 0) + continue; + } + dword = cmd[desc->bits[i].offset] & desc->bits[i].mask; diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index ac764d0fda4b..8e1576cf6d63 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1732,11 +1732,17 @@ struct drm_i915_cmd_descriptor { * the expected value, the parser rejects it. Only valid if flags has * the CMD_DESC_BITMASK bit set. Only entries where mask is non-zero * are valid. + * + * If the check specifies a non-zero condition_mask then the parser + * only performs the check when the bits specified by condition_mask + * are non-zero. */ struct { u32 offset; u32 mask; u32 expected; + u32 condition_offset; + u32 condition_mask; } bits[MAX_CMD_DESC_BITMASKS]; }; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 450a08bad7ae..899bb4434d43 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -190,6 +190,8 @@ * Memory interface instructions used by the kernel */ #define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags)) +/* Many MI commands use bit 22 of the header dword for GGTT vs PPGTT */ +#define MI_GLOBAL_GTT (1<<22) #define MI_NOOP MI_INSTR(0, 0) #define MI_USER_INTERRUPT MI_INSTR(0x02, 0) @@ -270,6 +272,7 @@ #define MI_FLUSH_DW_STORE_INDEX (1<<21) #define MI_INVALIDATE_TLB (1<<18) #define MI_FLUSH_DW_OP_STOREDW (1<<14) +#define MI_FLUSH_DW_OP_MASK (3<<14) #define MI_FLUSH_DW_NOTIFY (1<<8) #define MI_INVALIDATE_BSD (1<<7) #define MI_FLUSH_DW_USE_GTT (1<<2) @@ -336,6 +339,7 @@ #define PIPE_CONTROL_CS_STALL (1<<20) #define PIPE_CONTROL_TLB_INVALIDATE (1<<18) #define PIPE_CONTROL_QW_WRITE (1<<14) +#define PIPE_CONTROL_POST_SYNC_OP_MASK (3<<14) #define PIPE_CONTROL_DEPTH_STALL (1<<13) #define PIPE_CONTROL_WRITE_FLUSH (1<<12) #define PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH (1<<12) /* gen6+ */ @@ -364,6 +368,8 @@ #define MI_URB_CLEAR MI_INSTR(0x19, 0) #define MI_UPDATE_GTT MI_INSTR(0x23, 0) #define MI_CLFLUSH MI_INSTR(0x27, 0) +#define MI_REPORT_PERF_COUNT MI_INSTR(0x28, 0) +#define MI_REPORT_PERF_COUNT_GGTT (1<<0) #define MI_LOAD_REGISTER_MEM MI_INSTR(0x29, 0) #define MI_LOAD_REGISTER_REG MI_INSTR(0x2A, 0) #define MI_RS_STORE_DATA_IMM MI_INSTR(0x2B, 0) -- cgit v1.2.3 From 114d4f700878405a9fd65a6ade4f981514b82919 Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Tue, 18 Feb 2014 10:15:55 -0800 Subject: drm/i915: Reject commands that would store to global HWS page PIPE_CONTROL and MI_FLUSH_DW have bits that would write to the hardware status page. The driver stores request tracking info there, so don't let userspace overwrite it. v2: trailing comma fix, rebased Signed-off-by: Brad Volkin Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 24 +++++++++++++++++++++++- drivers/gpu/drm/i915/i915_reg.h | 1 + 2 files changed, 24 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index bf4ffd8826ba..a8f00dbc0dde 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -193,7 +193,8 @@ static const struct drm_i915_cmd_descriptor render_cmds[] = { }, { .offset = 1, - .mask = PIPE_CONTROL_GLOBAL_GTT_IVB, + .mask = (PIPE_CONTROL_GLOBAL_GTT_IVB | + PIPE_CONTROL_STORE_DATA_INDEX), .expected = 0, .condition_offset = 1, .condition_mask = PIPE_CONTROL_POST_SYNC_OP_MASK, @@ -242,6 +243,13 @@ static const struct drm_i915_cmd_descriptor video_cmds[] = { .expected = 0, .condition_offset = 0, .condition_mask = MI_FLUSH_DW_OP_MASK, + }, + { + .offset = 0, + .mask = MI_FLUSH_DW_STORE_INDEX, + .expected = 0, + .condition_offset = 0, + .condition_mask = MI_FLUSH_DW_OP_MASK, }}, ), CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, B, .bits = {{ @@ -278,6 +286,13 @@ static const struct drm_i915_cmd_descriptor vecs_cmds[] = { .expected = 0, .condition_offset = 0, .condition_mask = MI_FLUSH_DW_OP_MASK, + }, + { + .offset = 0, + .mask = MI_FLUSH_DW_STORE_INDEX, + .expected = 0, + .condition_offset = 0, + .condition_mask = MI_FLUSH_DW_OP_MASK, }}, ), CMD( MI_CONDITIONAL_BATCH_BUFFER_END, SMI, !F, 0xFF, B, .bits = {{ @@ -308,6 +323,13 @@ static const struct drm_i915_cmd_descriptor blt_cmds[] = { .expected = 0, .condition_offset = 0, .condition_mask = MI_FLUSH_DW_OP_MASK, + }, + { + .offset = 0, + .mask = MI_FLUSH_DW_STORE_INDEX, + .expected = 0, + .condition_offset = 0, + .condition_mask = MI_FLUSH_DW_OP_MASK, }}, ), CMD( COLOR_BLT, S2D, !F, 0x3F, S ), CMD( SRC_COPY_BLT, S2D, !F, 0x3F, S ), diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 899bb4434d43..bd7636604f7e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -336,6 +336,7 @@ #define GFX_OP_PIPE_CONTROL(len) ((0x3<<29)|(0x3<<27)|(0x2<<24)|(len-2)) #define PIPE_CONTROL_GLOBAL_GTT_IVB (1<<24) /* gen7+ */ #define PIPE_CONTROL_MMIO_WRITE (1<<23) +#define PIPE_CONTROL_STORE_DATA_INDEX (1<<21) #define PIPE_CONTROL_CS_STALL (1<<20) #define PIPE_CONTROL_TLB_INVALIDATE (1<<18) #define PIPE_CONTROL_QW_WRITE (1<<14) -- cgit v1.2.3 From d728c8ef8bea6e81f44933c0237531cda499577e Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Tue, 18 Feb 2014 10:15:56 -0800 Subject: drm/i915: Add a CMD_PARSER_VERSION getparam So userspace can query the kernel for command parser support. v2: Add i915_cmd_parser_get_version(), history log, and kerneldoc OTC-Tracker: AXIA-4631 Change-Id: I58af650db9f6753c2dcac9c54ab432fd31db302f Signed-off-by: Brad Volkin Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 19 +++++++++++++++++++ drivers/gpu/drm/i915/i915_dma.c | 3 +++ drivers/gpu/drm/i915/i915_drv.h | 1 + 3 files changed, 23 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index a8f00dbc0dde..bae7c2f33692 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -896,3 +896,22 @@ int i915_parse_cmds(struct intel_ring_buffer *ring, return ret; } + +/** + * i915_cmd_parser_get_version() - get the cmd parser version number + * + * The cmd parser maintains a simple increasing integer version number suitable + * for passing to userspace clients to determine what operations are permitted. + * + * Return: the current version number of the cmd parser + */ +int i915_cmd_parser_get_version(void) +{ + /* + * Command parser version history + * + * 1. Initial version. Checks batches and reports violations, but leaves + * hardware parsing enabled (so does not allow new use cases). + */ + return 1; +} diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 96177eec0a0e..0b38f88c35f0 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1017,6 +1017,9 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_HAS_EXEC_HANDLE_LUT: value = 1; break; + case I915_PARAM_CMD_PARSER_VERSION: + value = i915_cmd_parser_get_version(); + break; default: DRM_DEBUG("Unknown parameter %d\n", param->param); return -EINVAL; diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 8e1576cf6d63..0801e157a7ff 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2385,6 +2385,7 @@ void i915_get_extra_instdone(struct drm_device *dev, uint32_t *instdone); const char *i915_cache_level_str(int type); /* i915_cmd_parser.c */ +int i915_cmd_parser_get_version(void); void i915_cmd_parser_init_ring(struct intel_ring_buffer *ring); bool i915_needs_cmd_parser(struct intel_ring_buffer *ring); int i915_parse_cmds(struct intel_ring_buffer *ring, -- cgit v1.2.3 From 5c411bb18da78021e87cc192c5ed7ec0500f70ef Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Tue, 18 Feb 2014 10:15:57 -0800 Subject: drm/i915: Enable command parsing by default v2: rebased OTC-Tracker: AXIA-4631 Change-Id: I6747457e1fe7494bd42787af51198fcba398ad78 Signed-off-by: Brad Volkin Reviewed-by: Jani Nikula [danvet: Resolve tiny conflict in module option text.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_params.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c index d1d7980f0e01..e1027cc5f0ee 100644 --- a/drivers/gpu/drm/i915/i915_params.c +++ b/drivers/gpu/drm/i915/i915_params.c @@ -46,7 +46,7 @@ struct i915_params i915 __read_mostly = { .reset = true, .invert_brightness = 0, .disable_display = 0, - .enable_cmd_parser = 0, + .enable_cmd_parser = 1, }; module_param_named(modeset, i915.modeset, int, 0400); @@ -151,4 +151,4 @@ MODULE_PARM_DESC(disable_display, "Disable display (default: false)"); module_param_named(enable_cmd_parser, i915.enable_cmd_parser, int, 0600); MODULE_PARM_DESC(enable_cmd_parser, - "Enable command parsing (1=enabled, 0=disabled [default])"); + "Enable command parsing (1=enabled [default], 0=disabled)"); -- cgit v1.2.3 From 180b813ced1d1341c07f25e5195228100921d327 Mon Sep 17 00:00:00 2001 From: Kenneth Graunke Date: Tue, 25 Mar 2014 22:52:03 -0700 Subject: drm/i915: Add OACONTROL to the command parser register whitelist. Mesa needs to be able to write OACONTROL in order to expose the Observability Architecture's performance counters via OpenGL. Signed-off-by: Kenneth Graunke [danvet: Add comment that this is just a temporary work-around and that we need to check more things before we can allow OACONTROL writes for real everywhere.] [danvet 2: Squash in fixup to avoid a DRM_ERROR due to unsorted reg list, spotted by Jani.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 6 ++++++ drivers/gpu/drm/i915/i915_reg.h | 2 ++ 2 files changed, 8 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index bae7c2f33692..788bd96b266b 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -407,6 +407,12 @@ static const u32 gen7_render_regs[] = { REG64(CL_PRIMITIVES_COUNT), REG64(PS_INVOCATION_COUNT), REG64(PS_DEPTH_COUNT), + /* + * FIXME: This is just to keep mesa working for now, we need to check + * that mesa resets this again and that it doesn't use any of the + * special modes which write into the gtt. + */ + OACONTROL, REG64(GEN7_SO_NUM_PRIMS_WRITTEN(0)), REG64(GEN7_SO_NUM_PRIMS_WRITTEN(1)), REG64(GEN7_SO_NUM_PRIMS_WRITTEN(2)), diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index bd7636604f7e..1f927a53fe19 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -427,6 +427,8 @@ /* There are the 4 64-bit counter registers, one for each stream output */ #define GEN7_SO_NUM_PRIMS_WRITTEN(n) (0x5200 + (n) * 8) +#define OACONTROL 0x2360 + #define _GEN7_PIPEA_DE_LOAD_SL 0x70068 #define _GEN7_PIPEB_DE_LOAD_SL 0x71068 #define GEN7_PIPE_DE_LOAD_SL(pipe) _PIPE(pipe, \ -- cgit v1.2.3 From 0d8f94912a2e204a0faeac30f4d29f14aa05ee89 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 27 Mar 2014 09:06:14 +0000 Subject: drm/i915: Add PM interrupt details and RPS thresholds to debugfs When trying to determine whether RPS is working as intended, more information is better. In particular, what interrupts are being generated and the various thresholds for generating them. Signed-off-by: Chris Wilson Reviewed-by: Deepak S Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_debugfs.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index b27b7a5244b1..3df2a42ca5f5 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -991,6 +991,7 @@ static int i915_cur_delayinfo(struct seq_file *m, void *unused) u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS); u32 rp_state_limits = I915_READ(GEN6_RP_STATE_LIMITS); u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); + u32 rpmodectl, rpinclimit, rpdeclimit; u32 rpstat, cagf, reqf; u32 rpupei, rpcurup, rpprevup; u32 rpdownei, rpcurdown, rpprevdown; @@ -1011,6 +1012,10 @@ static int i915_cur_delayinfo(struct seq_file *m, void *unused) reqf >>= 25; reqf *= GT_FREQUENCY_MULTIPLIER; + rpmodectl = I915_READ(GEN6_RP_CONTROL); + rpinclimit = I915_READ(GEN6_RP_UP_THRESHOLD); + rpdeclimit = I915_READ(GEN6_RP_DOWN_THRESHOLD); + rpstat = I915_READ(GEN6_RPSTAT1); rpupei = I915_READ(GEN6_RP_CUR_UP_EI); rpcurup = I915_READ(GEN6_RP_CUR_UP); @@ -1027,14 +1032,23 @@ static int i915_cur_delayinfo(struct seq_file *m, void *unused) gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL); mutex_unlock(&dev->struct_mutex); + seq_printf(m, "PM IER=0x%08x IMR=0x%08x ISR=0x%08x IIR=0x%08x, MASK=0x%08x\n", + I915_READ(GEN6_PMIER), + I915_READ(GEN6_PMIMR), + I915_READ(GEN6_PMISR), + I915_READ(GEN6_PMIIR), + I915_READ(GEN6_PMINTRMSK)); seq_printf(m, "GT_PERF_STATUS: 0x%08x\n", gt_perf_status); - seq_printf(m, "RPSTAT1: 0x%08x\n", rpstat); seq_printf(m, "Render p-state ratio: %d\n", (gt_perf_status & 0xff00) >> 8); seq_printf(m, "Render p-state VID: %d\n", gt_perf_status & 0xff); seq_printf(m, "Render p-state limit: %d\n", rp_state_limits & 0xff); + seq_printf(m, "RPSTAT1: 0x%08x\n", rpstat); + seq_printf(m, "RPMODECTL: 0x%08x\n", rpmodectl); + seq_printf(m, "RPINCLIMIT: 0x%08x\n", rpinclimit); + seq_printf(m, "RPDECLIMIT: 0x%08x\n", rpdeclimit); seq_printf(m, "RPNSWREQ: %dMHz\n", reqf); seq_printf(m, "CAGF: %dMHz\n", cagf); seq_printf(m, "RP CUR UP EI: %dus\n", rpupei & -- cgit v1.2.3 From d60c4473b6f54876cb7e6bdb7fefee8ccb0d626f Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Thu, 27 Mar 2014 17:45:10 +0200 Subject: drm/i915: vlv: cache current CD clock rate MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instead of reading out the CD clock rate from the HW at each modeset, do this only during driver init and resume and use the cached value during modeset. This moves things towards a state where the sw and hw side setup is separated. It's also needed for VLV RPM, where we don't put device into D0 state until modeset_global_resources is called and thus can't access any display/gfx registers. Signed-off-by: Imre Deak Reviewed-by: Antti Koskipää Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_display.c | 16 +++++++--------- drivers/gpu/drm/i915/intel_drv.h | 1 + drivers/gpu/drm/i915/intel_pm.c | 4 ++++ 4 files changed, 13 insertions(+), 9 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 0801e157a7ff..c431ab9d93b2 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1339,6 +1339,7 @@ typedef struct drm_i915_private { int num_fence_regs; /* 8 on pre-965, 16 otherwise */ unsigned int fsb_freq, mem_freq, is_ddr3; + unsigned int vlv_cdclk_freq; /** * wq - Driver workqueue for GEM. diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c31c6203c7ca..451eef73f69c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4201,6 +4201,9 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) struct drm_i915_private *dev_priv = dev->dev_private; u32 val, cmd; + WARN_ON(valleyview_cur_cdclk(dev_priv) != dev_priv->vlv_cdclk_freq); + dev_priv->vlv_cdclk_freq = cdclk; + if (cdclk >= 320) /* jump to highest voltage for 400MHz too */ cmd = 2; else if (cdclk == 266) @@ -4255,7 +4258,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) intel_i2c_reset(dev); } -static int valleyview_cur_cdclk(struct drm_i915_private *dev_priv) +int valleyview_cur_cdclk(struct drm_i915_private *dev_priv) { int cur_cdclk, vco; int divider; @@ -4276,10 +4279,6 @@ static int valleyview_cur_cdclk(struct drm_i915_private *dev_priv) static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv, int max_pixclk) { - int cur_cdclk; - - cur_cdclk = valleyview_cur_cdclk(dev_priv); - /* * Really only a few cases to deal with, as only 4 CDclks are supported: * 200MHz @@ -4321,9 +4320,9 @@ static void valleyview_modeset_global_pipes(struct drm_device *dev, struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc; int max_pixclk = intel_mode_max_pixclk(dev_priv); - int cur_cdclk = valleyview_cur_cdclk(dev_priv); - if (valleyview_calc_cdclk(dev_priv, max_pixclk) == cur_cdclk) + if (valleyview_calc_cdclk(dev_priv, max_pixclk) == + dev_priv->vlv_cdclk_freq) return; /* disable/enable all currently active pipes while we change cdclk */ @@ -4337,10 +4336,9 @@ static void valleyview_modeset_global_resources(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int max_pixclk = intel_mode_max_pixclk(dev_priv); - int cur_cdclk = valleyview_cur_cdclk(dev_priv); int req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk); - if (req_cdclk != cur_cdclk) + if (req_cdclk != dev_priv->vlv_cdclk_freq) valleyview_set_cdclk(dev, req_cdclk); modeset_update_crtc_power_domains(dev); } diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 0542de982260..c0146cd65f26 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -665,6 +665,7 @@ void intel_ddi_get_config(struct intel_encoder *encoder, const char *intel_output_name(int output); bool intel_has_pending_fb_unpin(struct drm_device *dev); int intel_pch_rawclk(struct drm_device *dev); +int valleyview_cur_cdclk(struct drm_i915_private *dev_priv); void intel_mark_busy(struct drm_device *dev); void intel_mark_fb_busy(struct drm_i915_gem_object *obj, struct intel_ring_buffer *ring); diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 9277265dc9a6..fab8ad45a612 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -5078,6 +5078,10 @@ static void valleyview_init_clock_gating(struct drm_device *dev) } DRM_DEBUG_DRIVER("DDR speed: %d MHz", dev_priv->mem_freq); + dev_priv->vlv_cdclk_freq = valleyview_cur_cdclk(dev_priv); + DRM_DEBUG_DRIVER("Current CD clock rate: %d MHz", + dev_priv->vlv_cdclk_freq); + I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE); /* WaDisableEarlyCull:vlv */ -- cgit v1.2.3 From 4e6e1a545f65739a8bb87c487e8e23389fdff1b4 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Thu, 27 Mar 2014 17:45:11 +0200 Subject: drm/i915: vlv: get power domain for eDP vdd MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Besides D0 device state we need the proper power wells to be on on some platforms, so get the port power domain reference instead of an RPM reference. Signed-off-by: Imre Deak Reviewed-by: Antti Koskipää Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 44471ccdc385..67d8173ac21e 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1043,7 +1043,10 @@ static u32 ironlake_get_pp_control(struct intel_dp *intel_dp) static bool _edp_panel_vdd_on(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; struct drm_i915_private *dev_priv = dev->dev_private; + enum intel_display_power_domain power_domain; u32 pp; u32 pp_stat_reg, pp_ctrl_reg; bool need_to_disable = !intel_dp->want_panel_vdd; @@ -1056,7 +1059,8 @@ static bool _edp_panel_vdd_on(struct intel_dp *intel_dp) if (edp_have_panel_vdd(intel_dp)) return need_to_disable; - intel_runtime_pm_get(dev_priv); + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_get(dev_priv, power_domain); DRM_DEBUG_KMS("Turning eDP VDD on\n"); @@ -1103,6 +1107,11 @@ static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp) WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); if (!intel_dp->want_panel_vdd && edp_have_panel_vdd(intel_dp)) { + struct intel_digital_port *intel_dig_port = + dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; + enum intel_display_power_domain power_domain; + DRM_DEBUG_KMS("Turning eDP VDD off\n"); pp = ironlake_get_pp_control(intel_dp); @@ -1121,7 +1130,8 @@ static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp) if ((pp & POWER_TARGET_ON) == 0) intel_dp->last_power_cycle = jiffies; - intel_runtime_pm_put(dev_priv); + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_put(dev_priv, power_domain); } } @@ -1205,8 +1215,11 @@ void intel_edp_panel_on(struct intel_dp *intel_dp) void intel_edp_panel_off(struct intel_dp *intel_dp) { + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; + enum intel_display_power_domain power_domain; u32 pp; u32 pp_ctrl_reg; @@ -1236,7 +1249,8 @@ void intel_edp_panel_off(struct intel_dp *intel_dp) wait_panel_off(intel_dp); /* We got a reference when we enabled the VDD. */ - intel_runtime_pm_put(dev_priv); + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_put(dev_priv, power_domain); } void intel_edp_backlight_on(struct intel_dp *intel_dp) -- cgit v1.2.3 From 068be56163794c12e0f80d47cdcdb7e7487a05b6 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Fri, 28 Mar 2014 14:17:49 +0000 Subject: drm/i915: Don't store the max cursor width/height in the crtc Those values are, global, only used in one function and already stored in mode_config.cursor_{width,height}. As a result, this initialization code has been moved from the crtc_init() function to the global modeset_init() one. I also renamed CURSOR_{WIDTH,HEIGHT} to MAX_CURSOR_{WIDTH,HEIGHT} to be more accurate about what these value really are. Cc: Sagar Kamble Cc: Chris Wilson Cc: Imre Deak Signed-off-by: Damien Lespiau Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 19 +++++++++---------- drivers/gpu/drm/i915/intel_drv.h | 5 ++--- 2 files changed, 11 insertions(+), 13 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 451eef73f69c..8a2890f4f923 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10559,16 +10559,6 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs); - if (IS_GEN2(dev)) { - intel_crtc->max_cursor_width = GEN2_CURSOR_WIDTH; - intel_crtc->max_cursor_height = GEN2_CURSOR_HEIGHT; - } else { - intel_crtc->max_cursor_width = CURSOR_WIDTH; - intel_crtc->max_cursor_height = CURSOR_HEIGHT; - } - dev->mode_config.cursor_width = intel_crtc->max_cursor_width; - dev->mode_config.cursor_height = intel_crtc->max_cursor_height; - drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256); for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = i; @@ -11319,6 +11309,15 @@ void intel_modeset_init(struct drm_device *dev) dev->mode_config.max_width = 8192; dev->mode_config.max_height = 8192; } + + if (IS_GEN2(dev)) { + dev->mode_config.cursor_width = GEN2_CURSOR_WIDTH; + dev->mode_config.cursor_height = GEN2_CURSOR_HEIGHT; + } else { + dev->mode_config.cursor_width = MAX_CURSOR_WIDTH; + dev->mode_config.cursor_height = MAX_CURSOR_HEIGHT; + } + dev->mode_config.fb_base = dev_priv->gtt.mappable_base; DRM_DEBUG_KMS("%d display pipe%s available.\n", diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index c0146cd65f26..7b21571bb928 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -81,8 +81,8 @@ /* Maximum cursor sizes */ #define GEN2_CURSOR_WIDTH 64 #define GEN2_CURSOR_HEIGHT 64 -#define CURSOR_WIDTH 256 -#define CURSOR_HEIGHT 256 +#define MAX_CURSOR_WIDTH 256 +#define MAX_CURSOR_HEIGHT 256 #define INTEL_I2C_BUS_DVO 1 #define INTEL_I2C_BUS_SDVO 2 @@ -373,7 +373,6 @@ struct intel_crtc { uint32_t cursor_addr; int16_t cursor_x, cursor_y; int16_t cursor_width, cursor_height; - int16_t max_cursor_width, max_cursor_height; bool cursor_visible; struct intel_plane_config plane_config; -- cgit v1.2.3 From 1643a9c6a57e47402b9db787312eb43a81abe690 Mon Sep 17 00:00:00 2001 From: Christoph Jaeger Date: Fri, 28 Mar 2014 10:19:24 +0100 Subject: drm/i915: drop __FUNCTION__ as argument to DRM_DEBUG_KMS DRM_DEBUG_KMS includes printing the function name. Signed-off-by: Christoph Jaeger Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/dvo_ns2501.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/dvo_ns2501.c b/drivers/gpu/drm/i915/dvo_ns2501.c index 954acb2c7021..ce5242f69d80 100644 --- a/drivers/gpu/drm/i915/dvo_ns2501.c +++ b/drivers/gpu/drm/i915/dvo_ns2501.c @@ -233,9 +233,8 @@ static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo, struct drm_display_mode *mode) { DRM_DEBUG_KMS - ("%s: is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n", - __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay, - mode->vtotal); + ("is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n", + mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal); /* * Currently, these are all the modes I have data from. @@ -261,9 +260,8 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo, struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); DRM_DEBUG_KMS - ("%s: set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n", - __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay, - mode->vtotal); + ("set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n", + mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal); /* * Where do I find the native resolution for which scaling is not required??? @@ -277,8 +275,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo, if (mode->hdisplay == 800 && mode->vdisplay == 600) { /* mode 277 */ ns->reg_8_shadow &= ~NS2501_8_BPAS; - DRM_DEBUG_KMS("%s: switching to 800x600\n", - __FUNCTION__); + DRM_DEBUG_KMS("switching to 800x600\n"); /* * No, I do not know where this data comes from. @@ -341,8 +338,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo, } else if (mode->hdisplay == 640 && mode->vdisplay == 480) { /* mode 274 */ - DRM_DEBUG_KMS("%s: switching to 640x480\n", - __FUNCTION__); + DRM_DEBUG_KMS("switching to 640x480\n"); /* * No, I do not know where this data comes from. * It is just what the video bios left in the DVO, so @@ -406,8 +402,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo, } else if (mode->hdisplay == 1024 && mode->vdisplay == 768) { /* mode 280 */ - DRM_DEBUG_KMS("%s: switching to 1024x768\n", - __FUNCTION__); + DRM_DEBUG_KMS("switching to 1024x768\n"); /* * This might or might not work, actually. I'm silently * assuming here that the native panel resolution is @@ -458,8 +453,7 @@ static void ns2501_dpms(struct intel_dvo_device *dvo, bool enable) struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); unsigned char ch; - DRM_DEBUG_KMS("%s: Trying set the dpms of the DVO to %i\n", - __FUNCTION__, enable); + DRM_DEBUG_KMS("Trying set the dpms of the DVO to %i\n", enable); ch = ns->reg_8_shadow; -- cgit v1.2.3 From b88b23d93440ade699b5b4a3f4adb65aa8f39eb2 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Fri, 28 Mar 2014 16:54:25 +0000 Subject: drm/i915: Hide vlv_force_wake_{get, put}() in intel_uncore.c That function isn't used outside this file anymore. Signed-off-by: Damien Lespiau Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 3 --- drivers/gpu/drm/i915/intel_uncore.c | 6 ++---- 2 files changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index c431ab9d93b2..64025b5d4e66 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2538,9 +2538,6 @@ void vlv_flisdsi_write(struct drm_i915_private *dev_priv, u32 reg, u32 val); int vlv_gpu_freq(struct drm_i915_private *dev_priv, int val); int vlv_freq_opcode(struct drm_i915_private *dev_priv, int val); -void vlv_force_wake_get(struct drm_i915_private *dev_priv, int fw_engine); -void vlv_force_wake_put(struct drm_i915_private *dev_priv, int fw_engine); - #define FORCEWAKE_VLV_RENDER_RANGE_OFFSET(reg) \ (((reg) >= 0x2000 && (reg) < 0x4000) ||\ ((reg) >= 0x5000 && (reg) < 0x8000) ||\ diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c index f729dc71d5be..12f5aae3ae14 100644 --- a/drivers/gpu/drm/i915/intel_uncore.c +++ b/drivers/gpu/drm/i915/intel_uncore.c @@ -253,8 +253,7 @@ static void __vlv_force_wake_put(struct drm_i915_private *dev_priv, } -void vlv_force_wake_get(struct drm_i915_private *dev_priv, - int fw_engine) +static void vlv_force_wake_get(struct drm_i915_private *dev_priv, int fw_engine) { unsigned long irqflags; @@ -273,8 +272,7 @@ void vlv_force_wake_get(struct drm_i915_private *dev_priv, spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); } -void vlv_force_wake_put(struct drm_i915_private *dev_priv, - int fw_engine) +static void vlv_force_wake_put(struct drm_i915_private *dev_priv, int fw_engine) { unsigned long irqflags; -- cgit v1.2.3 From 38fb6a4085c10a83e11dd2555f4d0f235b3e0e71 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Fri, 28 Mar 2014 16:54:26 +0000 Subject: drm/i915: Hide the per forcewake-engine register ranges These defines are only used in intel_uncore.c. Signed-off-by: Damien Lespiau Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 11 ----------- drivers/gpu/drm/i915/intel_uncore.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 64025b5d4e66..2f1d20ac7333 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2538,17 +2538,6 @@ void vlv_flisdsi_write(struct drm_i915_private *dev_priv, u32 reg, u32 val); int vlv_gpu_freq(struct drm_i915_private *dev_priv, int val); int vlv_freq_opcode(struct drm_i915_private *dev_priv, int val); -#define FORCEWAKE_VLV_RENDER_RANGE_OFFSET(reg) \ - (((reg) >= 0x2000 && (reg) < 0x4000) ||\ - ((reg) >= 0x5000 && (reg) < 0x8000) ||\ - ((reg) >= 0xB000 && (reg) < 0x12000) ||\ - ((reg) >= 0x2E000 && (reg) < 0x30000)) - -#define FORCEWAKE_VLV_MEDIA_RANGE_OFFSET(reg)\ - (((reg) >= 0x12000 && (reg) < 0x14000) ||\ - ((reg) >= 0x22000 && (reg) < 0x24000) ||\ - ((reg) >= 0x30000 && (reg) < 0x40000)) - #define FORCEWAKE_RENDER (1 << 0) #define FORCEWAKE_MEDIA (1 << 1) #define FORCEWAKE_ALL (FORCEWAKE_RENDER | FORCEWAKE_MEDIA) diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c index 12f5aae3ae14..36d88b8434fa 100644 --- a/drivers/gpu/drm/i915/intel_uncore.c +++ b/drivers/gpu/drm/i915/intel_uncore.c @@ -484,6 +484,17 @@ void assert_force_wake_inactive(struct drm_i915_private *dev_priv) #define NEEDS_FORCE_WAKE(dev_priv, reg) \ ((reg) < 0x40000 && (reg) != FORCEWAKE) +#define FORCEWAKE_VLV_RENDER_RANGE_OFFSET(reg) \ + (((reg) >= 0x2000 && (reg) < 0x4000) ||\ + ((reg) >= 0x5000 && (reg) < 0x8000) ||\ + ((reg) >= 0xB000 && (reg) < 0x12000) ||\ + ((reg) >= 0x2E000 && (reg) < 0x30000)) + +#define FORCEWAKE_VLV_MEDIA_RANGE_OFFSET(reg)\ + (((reg) >= 0x12000 && (reg) < 0x14000) ||\ + ((reg) >= 0x22000 && (reg) < 0x24000) ||\ + ((reg) >= 0x30000 && (reg) < 0x40000)) + static void ilk_dummy_write(struct drm_i915_private *dev_priv) { -- cgit v1.2.3 From adb4bd123353772000aa687c2b88d5bc84c296e8 Mon Sep 17 00:00:00 2001 From: Deepak S Date: Mon, 31 Mar 2014 11:30:02 +0530 Subject: drm/i915: Match debugfs interface name to new RPS naming Let's change the i915_cur_delayinfo to i915_frequency_info to be in sync with new RPS naming convention. v2: Add "i915_frequency_info" as debugfs interface name (Ben) Signed-off-by: Deepak S Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 3df2a42ca5f5..41da286b7c97 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -966,7 +966,7 @@ static int i915_rstdby_delays(struct seq_file *m, void *unused) return 0; } -static int i915_cur_delayinfo(struct seq_file *m, void *unused) +static int i915_frequency_info(struct seq_file *m, void *unused) { struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; @@ -3788,7 +3788,7 @@ static const struct drm_info_list i915_debugfs_list[] = { {"i915_gem_hws_bsd", i915_hws_info, 0, (void *)VCS}, {"i915_gem_hws_vebox", i915_hws_info, 0, (void *)VECS}, {"i915_rstdby_delays", i915_rstdby_delays, 0}, - {"i915_cur_delayinfo", i915_cur_delayinfo, 0}, + {"i915_frequency_info", i915_frequency_info, 0}, {"i915_delayfreq_table", i915_delayfreq_table, 0}, {"i915_inttoext_table", i915_inttoext_table, 0}, {"i915_drpc_info", i915_drpc_info, 0}, -- cgit v1.2.3 From af76ae447d44bd60ec49988b1f28480c14fa79e5 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Mon, 31 Mar 2014 11:24:08 +0100 Subject: drm/i915: Use a macro to express the range of valid gens for reg_read The reg_read whitelist has a gen bitmask to code the gens we're allowing the register to be read on. Until now, it was a literal, but we can be a bit more expressive. To ease the review, a small test program: $ cat bit-range.c #include #include #define U32_C(x) x ## U #define GENMASK(h, l) (((U32_C(1) << ((h) - (l) + 1)) - 1) << (l)) #define GEN_RANGE(l, h) GENMASK(h, l) int main(int argc, char **argv) { printf("0x%08x\n", GEN_RANGE(1, 1)); printf("0x%08x\n", GEN_RANGE(1, 2)); printf("0x%08x\n", GEN_RANGE(4, 4)); printf("0x%08x\n", GEN_RANGE(4, 5)); printf("0x%08x\n", GEN_RANGE(1, 31)); printf("0x%08x\n", GEN_RANGE(4, 8)); return 0; } $ ./bit-range 0x00000002 0x00000006 0x00000010 0x00000030 0xfffffffe 0x000001f0 Signed-off-by: Damien Lespiau Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_uncore.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c index 36d88b8434fa..2a72bab106d5 100644 --- a/drivers/gpu/drm/i915/intel_uncore.c +++ b/drivers/gpu/drm/i915/intel_uncore.c @@ -861,12 +861,15 @@ void intel_uncore_fini(struct drm_device *dev) intel_uncore_forcewake_reset(dev, false); } +#define GEN_RANGE(l, h) GENMASK(h, l) + static const struct register_whitelist { uint64_t offset; uint32_t size; - uint32_t gen_bitmask; /* support gens, 0x10 for 4, 0x30 for 4 and 5, etc. */ + /* supported gens, 0x10 for 4, 0x30 for 4 and 5, etc. */ + uint32_t gen_bitmask; } whitelist[] = { - { RING_TIMESTAMP(RENDER_RING_BASE), 8, 0x1F0 }, + { RING_TIMESTAMP(RENDER_RING_BASE), 8, GEN_RANGE(4, 8) }, }; int i915_reg_read_ioctl(struct drm_device *dev, -- cgit v1.2.3 From 77fec5560b5123be21b815f0217a9732b7da72c3 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 31 Mar 2014 14:27:22 +0300 Subject: drm/i915: drop the typedef for drm_i915_private_t There are no longer users of drm_i915_private_t. Drop the typedef. Good riddance. Signed-off-by: Jani Nikula Acked-by: Chris Wilson [danvet: Add the hunk in i915_cmd_parser.c here which had to be relocated to the how this was merged.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 2 +- drivers/gpu/drm/i915/i915_drv.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index 788bd96b266b..d8e5034bdb1d 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -730,7 +730,7 @@ finish: */ bool i915_needs_cmd_parser(struct intel_ring_buffer *ring) { - drm_i915_private_t *dev_priv = ring->dev->dev_private; + struct drm_i915_private *dev_priv = ring->dev->dev_private; /* No command tables indicates a platform without parsing */ if (!ring->cmd_tables) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 2f1d20ac7333..ff02225d5edd 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1253,7 +1253,7 @@ struct intel_pipe_crc { wait_queue_head_t wq; }; -typedef struct drm_i915_private { +struct drm_i915_private { struct drm_device *dev; struct kmem_cache *slab; @@ -1459,7 +1459,7 @@ typedef struct drm_i915_private { struct i915_dri1_state dri1; /* Old ums support infrastructure, same warning applies. */ struct i915_ums_state ums; -} drm_i915_private_t; +}; static inline struct drm_i915_private *to_i915(const struct drm_device *dev) { -- cgit v1.2.3 From c7b78e6f237859a9326e6dd11b2a43b3d83f8e23 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 31 Mar 2014 16:23:03 +0200 Subject: drm/i915: Deprecate UMS harder Progess according to the deprecation plan laid out in commit b30324adaf8d2e5950a602bde63030d15a61826f Author: Daniel Vetter Date: Wed Nov 13 22:11:25 2013 +0100 drm/i915: Deprecated UMS support and disable UMS for 3.16. Note that it has been over 5 years since the last UMS-supporting piece of userspace was released. Acked-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/Kconfig b/drivers/gpu/drm/i915/Kconfig index 73ed59eff139..7213c38a4d91 100644 --- a/drivers/gpu/drm/i915/Kconfig +++ b/drivers/gpu/drm/i915/Kconfig @@ -72,7 +72,7 @@ config DRM_I915_PRELIMINARY_HW_SUPPORT config DRM_I915_UMS bool "Enable userspace modesetting on Intel hardware (DEPRECATED)" - depends on DRM_I915 + depends on DRM_I915 && BROKEN default n help Choose this option if you still need userspace modesetting. -- cgit v1.2.3 From 5812d07d6f8704c1af5372f03ce5332629d57e53 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 31 Mar 2014 21:29:41 +0300 Subject: drm/i915: Kill crtc->plane checks from the primary plane update hooks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit These were apparently meant to protect the SAREA which only has room for two pipes, but things clearly went a bit wonky when first the .update_plane() hooks were split up and then pipe C got introduced. The checks actually protecting the SAREA live in intel_crtc_update_sarea() these days, so the checks in the primary plane update hooks are just historical leftovers which are to be eliminated. Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 8a2890f4f923..fe1d6e41c42a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2166,15 +2166,6 @@ static int i9xx_update_primary_plane(struct drm_crtc *crtc, u32 dspcntr; u32 reg; - switch (plane) { - case 0: - case 1: - break; - default: - DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane)); - return -EINVAL; - } - intel_fb = to_intel_framebuffer(fb); obj = intel_fb->obj; @@ -2267,16 +2258,6 @@ static int ironlake_update_primary_plane(struct drm_crtc *crtc, u32 dspcntr; u32 reg; - switch (plane) { - case 0: - case 1: - case 2: - break; - default: - DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane)); - return -EINVAL; - } - intel_fb = to_intel_framebuffer(fb); obj = intel_fb->obj; -- cgit v1.2.3 From 49277c3171c4a59ea0a2004a848304cec65bcb7b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 31 Mar 2014 18:21:26 +0300 Subject: drm/i915: Split dp post_disable hooks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Split the post_disable hooks for DP to g4x and vlv variants. We'll need another variant soon, so this should make it look a bit cleaner. Signed-off-by: Ville Syrjälä Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 67d8173ac21e..b011a2bd0414 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1791,17 +1791,23 @@ static void intel_disable_dp(struct intel_encoder *encoder) intel_dp_link_down(intel_dp); } -static void intel_post_disable_dp(struct intel_encoder *encoder) +static void g4x_post_disable_dp(struct intel_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); enum port port = dp_to_dig_port(intel_dp)->port; - struct drm_device *dev = encoder->base.dev; - if (port == PORT_A || IS_VALLEYVIEW(dev)) { - intel_dp_link_down(intel_dp); - if (!IS_VALLEYVIEW(dev)) - ironlake_edp_pll_off(intel_dp); - } + if (port != PORT_A) + return; + + intel_dp_link_down(intel_dp); + ironlake_edp_pll_off(intel_dp); +} + +static void vlv_post_disable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + + intel_dp_link_down(intel_dp); } static void intel_enable_dp(struct intel_encoder *encoder) @@ -3845,16 +3851,17 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port) intel_encoder->compute_config = intel_dp_compute_config; intel_encoder->mode_set = intel_dp_mode_set; intel_encoder->disable = intel_disable_dp; - intel_encoder->post_disable = intel_post_disable_dp; intel_encoder->get_hw_state = intel_dp_get_hw_state; intel_encoder->get_config = intel_dp_get_config; if (IS_VALLEYVIEW(dev)) { intel_encoder->pre_pll_enable = vlv_dp_pre_pll_enable; intel_encoder->pre_enable = vlv_pre_enable_dp; intel_encoder->enable = vlv_enable_dp; + intel_encoder->post_disable = vlv_post_disable_dp; } else { intel_encoder->pre_enable = g4x_pre_enable_dp; intel_encoder->enable = g4x_enable_dp; + intel_encoder->post_disable = g4x_post_disable_dp; } intel_dig_port->port = port; -- cgit v1.2.3 From f9bdc58557b7fb91d17f4d9800dfda67f92fafee Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Mon, 31 Mar 2014 17:16:41 -0700 Subject: drm/i915/bdw: Set initial rps freq to RP1 Programming it outside of the rp0-rp1 range is considered a programming error. Since we do not know that the previous value would actually be in the range, program something we've read from the hardware, and therefore know will work. This is potentially an issue for platforms whose ranges are outside the norms given in the programming guide (ie. early silicon) v2: Use RP1 instead of RPn Reviewed-by: Chris Wilson Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index fab8ad45a612..5aa657b35a4e 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3279,8 +3279,10 @@ static void gen8_enable_rps(struct drm_device *dev) rc6_mask); /* 4 Program defaults and thresholds for RPS*/ - I915_WRITE(GEN6_RPNSWREQ, HSW_FREQUENCY(10)); /* Request 500 MHz */ - I915_WRITE(GEN6_RC_VIDEO_FREQ, HSW_FREQUENCY(12)); /* Request 600 MHz */ + I915_WRITE(GEN6_RPNSWREQ, + HSW_FREQUENCY(dev_priv->rps.rp1_freq)); + I915_WRITE(GEN6_RC_VIDEO_FREQ, + HSW_FREQUENCY(dev_priv->rps.rp1_freq)); /* NB: Docs say 1s, and 1000000 - which aren't equivalent */ I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 100000000 / 128); /* 1 second timeout */ -- cgit v1.2.3 From 3280e8b08fd0647629530c27cd36b37982a3b597 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Mon, 31 Mar 2014 17:16:42 -0700 Subject: drm/i915/bdw: Extract rp_state_caps logic We have a need for duplicated parsing of the RP_STATE_CAPS register (and the setting of the associated fields). To reuse some code, we can extract the function into a simple helper. This patch also addresses the fact that we missed doing this for gen8, something we should have done anyway. This could be two patches, one to extract, and one to add gen8, but it's trivial enough that I think one is fine. I will accept a request to split it. Please notice the fix addressed by v2 below. Valleyview is left untouched because it is different. v2: Logically rebased on top of commit dd0a1aa19bd3d7203e58157b84cea78bbac605ac Author: Jeff McGee Date: Tue Feb 4 11:32:31 2014 -0600 drm/i915: Restore rps/rc6 on reset Note with the above change the fix for gen8 is also handled (which was not the case in Jeff's original patch). Reviewed-by: Chris Wilson Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 40 +++++++++++++++++++++++----------------- 1 file changed, 23 insertions(+), 17 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 5aa657b35a4e..98abacd251bd 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3242,6 +3242,27 @@ static void gen6_enable_rps_interrupts(struct drm_device *dev) spin_unlock_irq(&dev_priv->irq_lock); } +static void parse_rp_state_cap(struct drm_i915_private *dev_priv, u32 rp_state_cap) +{ + /* All of these values are in units of 50MHz */ + dev_priv->rps.cur_freq = 0; + /* static values from HW: RP0 < RPe < RP1 < RPn (min_freq) */ + dev_priv->rps.rp1_freq = (rp_state_cap >> 8) & 0xff; + dev_priv->rps.rp0_freq = (rp_state_cap >> 0) & 0xff; + dev_priv->rps.min_freq = (rp_state_cap >> 16) & 0xff; + /* XXX: only BYT has a special efficient freq */ + dev_priv->rps.efficient_freq = dev_priv->rps.rp1_freq; + /* hw_max = RP0 until we check for overclocking */ + dev_priv->rps.max_freq = dev_priv->rps.rp0_freq; + + /* Preserve min/max settings in case of re-init */ + if (dev_priv->rps.max_freq_softlimit == 0) + dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq; + + if (dev_priv->rps.min_freq_softlimit == 0) + dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq; +} + static void gen8_enable_rps(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -3260,6 +3281,7 @@ static void gen8_enable_rps(struct drm_device *dev) I915_WRITE(GEN6_RC_CONTROL, 0); rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); + parse_rp_state_cap(dev_priv, rp_state_cap); /* 2b: Program RC6 thresholds.*/ I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16); @@ -3348,23 +3370,7 @@ static void gen6_enable_rps(struct drm_device *dev) rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS); - /* All of these values are in units of 50MHz */ - dev_priv->rps.cur_freq = 0; - /* static values from HW: RP0 < RPe < RP1 < RPn (min_freq) */ - dev_priv->rps.rp1_freq = (rp_state_cap >> 8) & 0xff; - dev_priv->rps.rp0_freq = (rp_state_cap >> 0) & 0xff; - dev_priv->rps.min_freq = (rp_state_cap >> 16) & 0xff; - /* XXX: only BYT has a special efficient freq */ - dev_priv->rps.efficient_freq = dev_priv->rps.rp1_freq; - /* hw_max = RP0 until we check for overclocking */ - dev_priv->rps.max_freq = dev_priv->rps.rp0_freq; - - /* Preserve min/max settings in case of re-init */ - if (dev_priv->rps.max_freq_softlimit == 0) - dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq; - - if (dev_priv->rps.min_freq_softlimit == 0) - dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq; + parse_rp_state_cap(dev_priv, rp_state_cap); /* disable the counters and set deterministic thresholds */ I915_WRITE(GEN6_RC_CONTROL, 0); -- cgit v1.2.3 From 50e6a2a74413806bd7fefb2a9aa4044aa49d3924 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Mon, 31 Mar 2014 17:16:43 -0700 Subject: drm/i915/bdw: RPS frequency bits are the same as HSW Reviewed-by: Rodrigo Vivi Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 98abacd251bd..cebe0d42a787 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3041,7 +3041,7 @@ void gen6_set_rps(struct drm_device *dev, u8 val) if (val != dev_priv->rps.cur_freq) { gen6_set_rps_thresholds(dev_priv, val); - if (IS_HASWELL(dev)) + if (IS_HASWELL(dev) || IS_BROADWELL(dev)) I915_WRITE(GEN6_RPNSWREQ, HSW_FREQUENCY(val)); else -- cgit v1.2.3 From 16c6c56bab1d9942c8089b7ea8a7382799fba5d8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 1 Apr 2014 10:54:36 +0300 Subject: drm/i915: Refactor gmch hpd irq handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Pull all the gmch platform hotplug interrupt handling into one function. v2: Move the IIR check to the caller s/drm_i915_private_t/struct drm_i915_private/ Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson [danvet: Add posting read comment suggested by Chris.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 73 +++++++++++++++++++---------------------- 1 file changed, 34 insertions(+), 39 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index c8d2445b259c..2163f18a6e1b 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1609,6 +1609,33 @@ static void valleyview_pipestat_irq_handler(struct drm_device *dev, u32 iir) gmbus_irq_handler(dev); } +static void i9xx_hpd_irq_handler(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); + + if (IS_G4X(dev)) { + u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_G4X; + + intel_hpd_irq_handler(dev, hotplug_trigger, hpd_status_g4x); + } else { + u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915; + + intel_hpd_irq_handler(dev, hotplug_trigger, hpd_status_i915); + } + + if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) && + hotplug_status & DP_AUX_CHANNEL_MASK_INT_STATUS_G4X) + dp_aux_irq_handler(dev); + + I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); + /* + * Make sure hotplug status is cleared before we clear IIR, or else we + * may miss hotplug events. + */ + POSTING_READ(PORT_HOTPLUG_STAT); +} + static irqreturn_t valleyview_irq_handler(int irq, void *arg) { struct drm_device *dev = (struct drm_device *) arg; @@ -1631,19 +1658,8 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg) valleyview_pipestat_irq_handler(dev, iir); /* Consume port. Then clear IIR or we'll miss events */ - if (iir & I915_DISPLAY_PORT_INTERRUPT) { - u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); - u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915; - - intel_hpd_irq_handler(dev, hotplug_trigger, hpd_status_i915); - - if (hotplug_status & DP_AUX_CHANNEL_MASK_INT_STATUS_G4X) - dp_aux_irq_handler(dev); - - I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); - I915_READ(PORT_HOTPLUG_STAT); - } - + if (iir & I915_DISPLAY_PORT_INTERRUPT) + i9xx_hpd_irq_handler(dev); if (pm_iir) gen6_rps_irq_handler(dev_priv, pm_iir); @@ -3675,16 +3691,9 @@ static irqreturn_t i915_irq_handler(int irq, void *arg) break; /* Consume port. Then clear IIR or we'll miss events */ - if ((I915_HAS_HOTPLUG(dev)) && - (iir & I915_DISPLAY_PORT_INTERRUPT)) { - u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); - u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915; - - intel_hpd_irq_handler(dev, hotplug_trigger, hpd_status_i915); - - I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); - POSTING_READ(PORT_HOTPLUG_STAT); - } + if (I915_HAS_HOTPLUG(dev) && + iir & I915_DISPLAY_PORT_INTERRUPT) + i9xx_hpd_irq_handler(dev); I915_WRITE(IIR, iir & ~flip_mask); new_iir = I915_READ(IIR); /* Flush posted writes */ @@ -3918,22 +3927,8 @@ static irqreturn_t i965_irq_handler(int irq, void *arg) ret = IRQ_HANDLED; /* Consume port. Then clear IIR or we'll miss events */ - if (iir & I915_DISPLAY_PORT_INTERRUPT) { - u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); - u32 hotplug_trigger = hotplug_status & (IS_G4X(dev) ? - HOTPLUG_INT_STATUS_G4X : - HOTPLUG_INT_STATUS_I915); - - intel_hpd_irq_handler(dev, hotplug_trigger, - IS_G4X(dev) ? hpd_status_g4x : hpd_status_i915); - - if (IS_G4X(dev) && - (hotplug_status & DP_AUX_CHANNEL_MASK_INT_STATUS_G4X)) - dp_aux_irq_handler(dev); - - I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); - I915_READ(PORT_HOTPLUG_STAT); - } + if (iir & I915_DISPLAY_PORT_INTERRUPT) + i9xx_hpd_irq_handler(dev); I915_WRITE(IIR, iir & ~flip_mask); new_iir = I915_READ(IIR); /* Flush posted writes */ -- cgit v1.2.3 From c2d15359c4b5476c181d8a51bdeba4cead15c120 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 1 Apr 2014 12:59:08 +0300 Subject: drm: Make drm_clflush_virt_range() void* MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently drm_cflush_virt_rage() takes a char* so the caller probably has to do pointless casting to avoid compiler warnings. Make the argument void* instead to avoid such issues. v2: Use void* arithmetic (Chris) Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Acked-by: Dave Airlie Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_cache.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/drm_cache.c b/drivers/gpu/drm/drm_cache.c index bb8f58012189..4bfad5f5a843 100644 --- a/drivers/gpu/drm/drm_cache.c +++ b/drivers/gpu/drm/drm_cache.c @@ -125,11 +125,11 @@ drm_clflush_sg(struct sg_table *st) EXPORT_SYMBOL(drm_clflush_sg); void -drm_clflush_virt_range(char *addr, unsigned long length) +drm_clflush_virt_range(void *addr, unsigned long length) { #if defined(CONFIG_X86) if (cpu_has_clflush) { - char *end = addr + length; + void *end = addr + length; mb(); for (; addr < end; addr += boot_cpu_data.x86_clflush_size) clflush(addr); -- cgit v1.2.3 From 83a7280ebc359726d4b79b8772c9fddd7fd03f43 Mon Sep 17 00:00:00 2001 From: Pradeep Bhat Date: Fri, 28 Mar 2014 10:14:57 +0530 Subject: drm/i915: Adding VBT fields to support eDP DRRS feature This patch reads the DRRS support and Mode type from VBT fields. The read information will be stored in VBT struct during BIOS parsing. The above functionality is needed for decision making whether DRRS feature is supported in i915 driver for eDP panels. This information helps us decide if seamless DRRS can be done at runtime to support certain power saving features. This patch was tested by setting necessary bit in VBT struct and merging the new VBT with system BIOS so that we can read the value. v2: Incorporated review comments from Chris Wilson Removed "intel_" as a prefix for DRRS specific declarations. v3: Incorporated Jani's review comments Removed function which deducts drrs mode from panel_type. Modified some print statements. Made changes to use DRRS_NOT_SUPPORTED as 0 instead of -1. v4: Incorporated Jani's review comments. Modifications around setting vbt drrs_type. Signed-off-by: Pradeep Bhat Signed-off-by: Vandana Kannan Acked-by: Jesse Barnes Cc: Jani Nikula [danvet: Drop the misleading/redundant comment about the added drrs field in the vbt struct as discussed with Jani on irc.] Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 8 ++++++++ drivers/gpu/drm/i915/intel_bios.c | 34 +++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_bios.h | 29 +++++++++++++++++++++++++++++ 3 files changed, 70 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index ff02225d5edd..828886009ef4 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1120,6 +1120,12 @@ struct ddi_vbt_port_info { uint8_t supports_dp:1; }; +enum drrs_support_type { + DRRS_NOT_SUPPORTED = 0, + STATIC_DRRS_SUPPORT = 1, + SEAMLESS_DRRS_SUPPORT = 2 +}; + struct intel_vbt_data { struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */ struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */ @@ -1135,6 +1141,8 @@ struct intel_vbt_data { int lvds_ssc_freq; unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */ + enum drrs_support_type drrs_type; + /* eDP */ int edp_rate; int edp_lanes; diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 4867f4cc0938..9b986775c4b0 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -206,7 +206,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, const struct lvds_dvo_timing *panel_dvo_timing; const struct lvds_fp_timing *fp_timing; struct drm_display_mode *panel_fixed_mode; - int i, downclock; + int i, downclock, drrs_mode; lvds_options = find_section(bdb, BDB_LVDS_OPTIONS); if (!lvds_options) @@ -218,6 +218,28 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, panel_type = lvds_options->panel_type; + drrs_mode = (lvds_options->dps_panel_type_bits + >> (panel_type * 2)) & MODE_MASK; + /* + * VBT has static DRRS = 0 and seamless DRRS = 2. + * The below piece of code is required to adjust vbt.drrs_type + * to match the enum drrs_support_type. + */ + switch (drrs_mode) { + case 0: + dev_priv->vbt.drrs_type = STATIC_DRRS_SUPPORT; + DRM_DEBUG_KMS("DRRS supported mode is static\n"); + break; + case 2: + dev_priv->vbt.drrs_type = SEAMLESS_DRRS_SUPPORT; + DRM_DEBUG_KMS("DRRS supported mode is seamless\n"); + break; + default: + dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED; + DRM_DEBUG_KMS("DRRS not supported (VBT input)\n"); + break; + } + lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA); if (!lvds_lfp_data) return; @@ -516,6 +538,16 @@ parse_driver_features(struct drm_i915_private *dev_priv, if (driver->dual_frequency) dev_priv->render_reclock_avail = true; + + DRM_DEBUG_KMS("DRRS State Enabled:%d\n", driver->drrs_enabled); + /* + * If DRRS is not supported, drrs_type has to be set to 0. + * This is because, VBT is configured in such a way that + * static DRRS is 0 and DRRS not supported is represented by + * driver->drrs_enabled=false + */ + if (!driver->drrs_enabled) + dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED; } static void diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h index 83b7629e4367..d02e5f93c362 100644 --- a/drivers/gpu/drm/i915/intel_bios.h +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -282,6 +282,9 @@ struct bdb_general_definitions { union child_device_config devices[0]; } __packed; +/* Mask for DRRS / Panel Channel / SSC / BLT control bits extraction */ +#define MODE_MASK 0x3 + struct bdb_lvds_options { u8 panel_type; u8 rsvd1; @@ -294,6 +297,18 @@ struct bdb_lvds_options { u8 lvds_edid:1; u8 rsvd2:1; u8 rsvd4; + /* LVDS Panel channel bits stored here */ + u32 lvds_panel_channel_bits; + /* LVDS SSC (Spread Spectrum Clock) bits stored here. */ + u16 ssc_bits; + u16 ssc_freq; + u16 ssc_ddt; + /* Panel color depth defined here */ + u16 panel_color_depth; + /* LVDS panel type bits stored here */ + u32 dps_panel_type_bits; + /* LVDS backlight control type bits stored here */ + u32 blt_control_type_bits; } __packed; /* LFP pointer table contains entries to the struct below */ @@ -479,6 +494,20 @@ struct bdb_driver_features { u8 hdmi_termination; u8 custom_vbt_version; + /* Driver features data block */ + u16 rmpm_enabled:1; + u16 s2ddt_enabled:1; + u16 dpst_enabled:1; + u16 bltclt_enabled:1; + u16 adb_enabled:1; + u16 drrs_enabled:1; + u16 grs_enabled:1; + u16 gpmt_enabled:1; + u16 tbt_enabled:1; + u16 psr_enabled:1; + u16 ips_enabled:1; + u16 reserved3:4; + u16 pc_feature_valid:1; } __packed; #define EDP_18BPP 0 -- cgit v1.2.3 From a9d356a6b8480950d3e4bf49c89c003d87692a18 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:09 -0300 Subject: drm/i915: add GEN5_IRQ_INIT macro The goal is to reuse the GEN8 macros, but a few changes are needed, so let's make things easier to review. I could also use these macros on older code, but since I plan to change how the interrupts are initialized, we'll risk breaking the older code in the next commits, so I'll leave this out for now. v2: - Rebase. Reviewed-by: Ben Widawsky Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 2163f18a6e1b..f487068e8f5a 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -80,6 +80,12 @@ static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */ [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS }; +#define GEN5_IRQ_INIT(type) do { \ + I915_WRITE(type##IMR, 0xffffffff); \ + I915_WRITE(type##IER, 0); \ + POSTING_READ(type##IER); \ +} while (0) + /* For display hotplug interrupt */ static void ironlake_enable_display_irq(struct drm_i915_private *dev_priv, u32 mask) @@ -2837,17 +2843,9 @@ static void gen5_gt_irq_preinstall(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - /* and GT */ - I915_WRITE(GTIMR, 0xffffffff); - I915_WRITE(GTIER, 0x0); - POSTING_READ(GTIER); - - if (INTEL_INFO(dev)->gen >= 6) { - /* and PM */ - I915_WRITE(GEN6_PMIMR, 0xffffffff); - I915_WRITE(GEN6_PMIER, 0x0); - POSTING_READ(GEN6_PMIER); - } + GEN5_IRQ_INIT(GT); + if (INTEL_INFO(dev)->gen >= 6) + GEN5_IRQ_INIT(GEN6_PM); } /* drm_dma.h hooks @@ -2858,9 +2856,7 @@ static void ironlake_irq_preinstall(struct drm_device *dev) I915_WRITE(HWSTAM, 0xeffe); - I915_WRITE(DEIMR, 0xffffffff); - I915_WRITE(DEIER, 0x0); - POSTING_READ(DEIER); + GEN5_IRQ_INIT(DE); gen5_gt_irq_preinstall(dev); -- cgit v1.2.3 From 0bda1cf739e657ebfdde41b723e8a3a21efed6a3 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:10 -0300 Subject: drm/i915: also use GEN5_IRQ_INIT with south display interrupts This interrupt gets initialized with a different IER value, so it was not using the macro. The problem is that we plan to modify the macro to make it do additional things, and we want the SDE interrupts updated too. So let's make sure we call the macro, then, after it, we do the necessary SDE-specific changes. Reviewed-by: Ben Widawsky Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index f487068e8f5a..af1d43c81348 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2827,8 +2827,7 @@ static void ibx_irq_preinstall(struct drm_device *dev) if (HAS_PCH_NOP(dev)) return; - /* south display irq */ - I915_WRITE(SDEIMR, 0xffffffff); + GEN5_IRQ_INIT(SDE); /* * SDEIER is also touched by the interrupt handler to work around missed * PCH interrupts. Hence we can't update it after the interrupt handler -- cgit v1.2.3 From 5c50244253937479481ed87ff58863d7c3e91ee3 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:11 -0300 Subject: drm/i915: use GEN8_IRQ_INIT on GEN5 And rename it to GEN5_IRQ_INIT. We have discussed doing equivalent changes on July 2013, and I even sent a patch series for this: "[PATCH 00/15] Unify interrupt register init/reset". Now that the BDW code was merged, I have one more argument in favor of these changes. Here's what really changes with the Gen 5 IRQ init code: - We now clear the IIR registers at preinstall (they are also cleared at postinstall, but we will change that later). - We have an additional POSTING_READ at the IMR register. v2: - Fix typo in commit message. - Add POSTING_READ calls to the macros (Ben, Daniel, Jani). Reviewed-by: Ben Widawsky (v1) Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 46 +++++++++++++++++------------------------ 1 file changed, 19 insertions(+), 27 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index af1d43c81348..bc7e2303cd4f 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -80,10 +80,25 @@ static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */ [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS }; +/* IIR can theoretically queue up two events. Be paranoid. */ +#define GEN8_IRQ_INIT_NDX(type, which) do { \ + I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff); \ + POSTING_READ(GEN8_##type##_IMR(which)); \ + I915_WRITE(GEN8_##type##_IER(which), 0); \ + I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \ + POSTING_READ(GEN8_##type##_IIR(which)); \ + I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \ + POSTING_READ(GEN8_##type##_IIR(which)); \ +} while (0) + #define GEN5_IRQ_INIT(type) do { \ I915_WRITE(type##IMR, 0xffffffff); \ + POSTING_READ(type##IMR); \ I915_WRITE(type##IER, 0); \ - POSTING_READ(type##IER); \ + I915_WRITE(type##IIR, 0xffffffff); \ + POSTING_READ(type##IIR); \ + I915_WRITE(type##IIR, 0xffffffff); \ + POSTING_READ(type##IIR); \ } while (0) /* For display hotplug interrupt */ @@ -2899,25 +2914,6 @@ static void gen8_irq_preinstall(struct drm_device *dev) I915_WRITE(GEN8_MASTER_IRQ, 0); POSTING_READ(GEN8_MASTER_IRQ); - /* IIR can theoretically queue up two events. Be paranoid */ -#define GEN8_IRQ_INIT_NDX(type, which) do { \ - I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff); \ - POSTING_READ(GEN8_##type##_IMR(which)); \ - I915_WRITE(GEN8_##type##_IER(which), 0); \ - I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \ - POSTING_READ(GEN8_##type##_IIR(which)); \ - I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \ - } while (0) - -#define GEN8_IRQ_INIT(type) do { \ - I915_WRITE(GEN8_##type##_IMR, 0xffffffff); \ - POSTING_READ(GEN8_##type##_IMR); \ - I915_WRITE(GEN8_##type##_IER, 0); \ - I915_WRITE(GEN8_##type##_IIR, 0xffffffff); \ - POSTING_READ(GEN8_##type##_IIR); \ - I915_WRITE(GEN8_##type##_IIR, 0xffffffff); \ - } while (0) - GEN8_IRQ_INIT_NDX(GT, 0); GEN8_IRQ_INIT_NDX(GT, 1); GEN8_IRQ_INIT_NDX(GT, 2); @@ -2927,13 +2923,9 @@ static void gen8_irq_preinstall(struct drm_device *dev) GEN8_IRQ_INIT_NDX(DE_PIPE, pipe); } - GEN8_IRQ_INIT(DE_PORT); - GEN8_IRQ_INIT(DE_MISC); - GEN8_IRQ_INIT(PCU); -#undef GEN8_IRQ_INIT -#undef GEN8_IRQ_INIT_NDX - - POSTING_READ(GEN8_PCU_IIR); + GEN5_IRQ_INIT(GEN8_DE_PORT_); + GEN5_IRQ_INIT(GEN8_DE_MISC_); + GEN5_IRQ_INIT(GEN8_PCU_); ibx_irq_preinstall(dev); } -- cgit v1.2.3 From c955483facc10322cd7df17680b9f5a366a2d82a Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:12 -0300 Subject: drm/i915: add GEN5_IRQ_FINI Same as the _INIT macro: the goal is to reuse the GEN8 macros, but there are still some slight differences. v2: - Rebase. Reviewed-by: Ben Widawsky Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index bc7e2303cd4f..26bfe1bfe06e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -101,6 +101,12 @@ static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */ POSTING_READ(type##IIR); \ } while (0) +#define GEN5_IRQ_FINI(type) do { \ + I915_WRITE(type##IMR, 0xffffffff); \ + I915_WRITE(type##IER, 0); \ + I915_WRITE(type##IIR, I915_READ(type##IIR)); \ +} while (0) + /* For display hotplug interrupt */ static void ironlake_enable_display_irq(struct drm_i915_private *dev_priv, u32 mask) @@ -3353,22 +3359,16 @@ static void ironlake_irq_uninstall(struct drm_device *dev) I915_WRITE(HWSTAM, 0xffffffff); - I915_WRITE(DEIMR, 0xffffffff); - I915_WRITE(DEIER, 0x0); - I915_WRITE(DEIIR, I915_READ(DEIIR)); + GEN5_IRQ_FINI(DE); if (IS_GEN7(dev)) I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT)); - I915_WRITE(GTIMR, 0xffffffff); - I915_WRITE(GTIER, 0x0); - I915_WRITE(GTIIR, I915_READ(GTIIR)); + GEN5_IRQ_FINI(GT); if (HAS_PCH_NOP(dev)) return; - I915_WRITE(SDEIMR, 0xffffffff); - I915_WRITE(SDEIER, 0x0); - I915_WRITE(SDEIIR, I915_READ(SDEIIR)); + GEN5_IRQ_FINI(SDE); if (HAS_PCH_CPT(dev) || HAS_PCH_LPT(dev)) I915_WRITE(SERR_INT, I915_READ(SERR_INT)); } -- cgit v1.2.3 From c71ae0148e103fbad49c49d4c2ba27d46bb8eef5 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:13 -0300 Subject: drm/i915: don't forget to uninstall the PM IRQs It's the only thing missing, apparently. v2: - Fix typo (Ben). Reviewed-by: Ben Widawsky Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 26bfe1bfe06e..72bb44344909 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -3364,6 +3364,8 @@ static void ironlake_irq_uninstall(struct drm_device *dev) I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT)); GEN5_IRQ_FINI(GT); + if (INTEL_INFO(dev)->gen >= 6) + GEN5_IRQ_FINI(GEN6_PM); if (HAS_PCH_NOP(dev)) return; -- cgit v1.2.3 From f86f3fb005d0c907285fa8685badcb24ec31ee59 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:14 -0300 Subject: drm/i915: properly clear IIR at irq_uninstall on Gen5+ The IRQ_INIT and IRQ_FINI macros are basically the same thing, with the exception that IRQ_FINI doesn't properly clear IIR twice and doesn't have as many POSTING_READs as IRQ_INIT. So rename the INIT macro to IRQ_RESET and use it everywhere. v2: - Fix error in the commit message (Chris). - Adjust to the new POSTING_READ scheme (Ben). Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 77 +++++++++++++++-------------------------- 1 file changed, 27 insertions(+), 50 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 72bb44344909..a2a2d51c0917 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -81,7 +81,7 @@ static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */ }; /* IIR can theoretically queue up two events. Be paranoid. */ -#define GEN8_IRQ_INIT_NDX(type, which) do { \ +#define GEN8_IRQ_RESET_NDX(type, which) do { \ I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff); \ POSTING_READ(GEN8_##type##_IMR(which)); \ I915_WRITE(GEN8_##type##_IER(which), 0); \ @@ -91,7 +91,7 @@ static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */ POSTING_READ(GEN8_##type##_IIR(which)); \ } while (0) -#define GEN5_IRQ_INIT(type) do { \ +#define GEN5_IRQ_RESET(type) do { \ I915_WRITE(type##IMR, 0xffffffff); \ POSTING_READ(type##IMR); \ I915_WRITE(type##IER, 0); \ @@ -101,12 +101,6 @@ static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */ POSTING_READ(type##IIR); \ } while (0) -#define GEN5_IRQ_FINI(type) do { \ - I915_WRITE(type##IMR, 0xffffffff); \ - I915_WRITE(type##IER, 0); \ - I915_WRITE(type##IIR, I915_READ(type##IIR)); \ -} while (0) - /* For display hotplug interrupt */ static void ironlake_enable_display_irq(struct drm_i915_private *dev_priv, u32 mask) @@ -2848,7 +2842,7 @@ static void ibx_irq_preinstall(struct drm_device *dev) if (HAS_PCH_NOP(dev)) return; - GEN5_IRQ_INIT(SDE); + GEN5_IRQ_RESET(SDE); /* * SDEIER is also touched by the interrupt handler to work around missed * PCH interrupts. Hence we can't update it after the interrupt handler @@ -2863,9 +2857,9 @@ static void gen5_gt_irq_preinstall(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - GEN5_IRQ_INIT(GT); + GEN5_IRQ_RESET(GT); if (INTEL_INFO(dev)->gen >= 6) - GEN5_IRQ_INIT(GEN6_PM); + GEN5_IRQ_RESET(GEN6_PM); } /* drm_dma.h hooks @@ -2876,7 +2870,7 @@ static void ironlake_irq_preinstall(struct drm_device *dev) I915_WRITE(HWSTAM, 0xeffe); - GEN5_IRQ_INIT(DE); + GEN5_IRQ_RESET(DE); gen5_gt_irq_preinstall(dev); @@ -2920,18 +2914,18 @@ static void gen8_irq_preinstall(struct drm_device *dev) I915_WRITE(GEN8_MASTER_IRQ, 0); POSTING_READ(GEN8_MASTER_IRQ); - GEN8_IRQ_INIT_NDX(GT, 0); - GEN8_IRQ_INIT_NDX(GT, 1); - GEN8_IRQ_INIT_NDX(GT, 2); - GEN8_IRQ_INIT_NDX(GT, 3); + GEN8_IRQ_RESET_NDX(GT, 0); + GEN8_IRQ_RESET_NDX(GT, 1); + GEN8_IRQ_RESET_NDX(GT, 2); + GEN8_IRQ_RESET_NDX(GT, 3); for_each_pipe(pipe) { - GEN8_IRQ_INIT_NDX(DE_PIPE, pipe); + GEN8_IRQ_RESET_NDX(DE_PIPE, pipe); } - GEN5_IRQ_INIT(GEN8_DE_PORT_); - GEN5_IRQ_INIT(GEN8_DE_MISC_); - GEN5_IRQ_INIT(GEN8_PCU_); + GEN5_IRQ_RESET(GEN8_DE_PORT_); + GEN5_IRQ_RESET(GEN8_DE_MISC_); + GEN5_IRQ_RESET(GEN8_PCU_); ibx_irq_preinstall(dev); } @@ -3287,34 +3281,17 @@ static void gen8_irq_uninstall(struct drm_device *dev) I915_WRITE(GEN8_MASTER_IRQ, 0); -#define GEN8_IRQ_FINI_NDX(type, which) do { \ - I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff); \ - I915_WRITE(GEN8_##type##_IER(which), 0); \ - I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \ - } while (0) - -#define GEN8_IRQ_FINI(type) do { \ - I915_WRITE(GEN8_##type##_IMR, 0xffffffff); \ - I915_WRITE(GEN8_##type##_IER, 0); \ - I915_WRITE(GEN8_##type##_IIR, 0xffffffff); \ - } while (0) + GEN8_IRQ_RESET_NDX(GT, 0); + GEN8_IRQ_RESET_NDX(GT, 1); + GEN8_IRQ_RESET_NDX(GT, 2); + GEN8_IRQ_RESET_NDX(GT, 3); - GEN8_IRQ_FINI_NDX(GT, 0); - GEN8_IRQ_FINI_NDX(GT, 1); - GEN8_IRQ_FINI_NDX(GT, 2); - GEN8_IRQ_FINI_NDX(GT, 3); - - for_each_pipe(pipe) { - GEN8_IRQ_FINI_NDX(DE_PIPE, pipe); - } - - GEN8_IRQ_FINI(DE_PORT); - GEN8_IRQ_FINI(DE_MISC); - GEN8_IRQ_FINI(PCU); -#undef GEN8_IRQ_FINI -#undef GEN8_IRQ_FINI_NDX + for_each_pipe(pipe) + GEN8_IRQ_RESET_NDX(DE_PIPE, pipe); - POSTING_READ(GEN8_PCU_IIR); + GEN5_IRQ_RESET(GEN8_DE_PORT_); + GEN5_IRQ_RESET(GEN8_DE_MISC_); + GEN5_IRQ_RESET(GEN8_PCU_); } static void valleyview_irq_uninstall(struct drm_device *dev) @@ -3359,18 +3336,18 @@ static void ironlake_irq_uninstall(struct drm_device *dev) I915_WRITE(HWSTAM, 0xffffffff); - GEN5_IRQ_FINI(DE); + GEN5_IRQ_RESET(DE); if (IS_GEN7(dev)) I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT)); - GEN5_IRQ_FINI(GT); + GEN5_IRQ_RESET(GT); if (INTEL_INFO(dev)->gen >= 6) - GEN5_IRQ_FINI(GEN6_PM); + GEN5_IRQ_RESET(GEN6_PM); if (HAS_PCH_NOP(dev)) return; - GEN5_IRQ_FINI(SDE); + GEN5_IRQ_RESET(SDE); if (HAS_PCH_CPT(dev) || HAS_PCH_LPT(dev)) I915_WRITE(SERR_INT, I915_READ(SERR_INT)); } -- cgit v1.2.3 From 35079899e78315355d882658ae29bb94a2b6609b Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:15 -0300 Subject: drm/i915: add GEN5_IRQ_INIT And the equivalent GEN8_IRQ_INIT_NDX macro. These macros are for the postinstall functions. The next patch will improve this macro. v2: - Adjust to the new POSTING_READ scheme (Ben). Reviewed-by: Ben Widawsky (v1) Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index a2a2d51c0917..ef4adf65e311 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -101,6 +101,18 @@ static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */ POSTING_READ(type##IIR); \ } while (0) +#define GEN8_IRQ_INIT_NDX(type, which, imr_val, ier_val) do { \ + I915_WRITE(GEN8_##type##_IMR(which), (imr_val)); \ + I915_WRITE(GEN8_##type##_IER(which), (ier_val)); \ + POSTING_READ(GEN8_##type##_IER(which)); \ +} while (0) + +#define GEN5_IRQ_INIT(type, imr_val, ier_val) do { \ + I915_WRITE(type##IMR, (imr_val)); \ + I915_WRITE(type##IER, (ier_val)); \ + POSTING_READ(type##IER); \ +} while (0) + /* For display hotplug interrupt */ static void ironlake_enable_display_irq(struct drm_i915_private *dev_priv, u32 mask) @@ -3008,9 +3020,7 @@ static void gen5_gt_irq_postinstall(struct drm_device *dev) } I915_WRITE(GTIIR, I915_READ(GTIIR)); - I915_WRITE(GTIMR, dev_priv->gt_irq_mask); - I915_WRITE(GTIER, gt_irqs); - POSTING_READ(GTIER); + GEN5_IRQ_INIT(GT, dev_priv->gt_irq_mask, gt_irqs); if (INTEL_INFO(dev)->gen >= 6) { pm_irqs |= dev_priv->pm_rps_events; @@ -3020,9 +3030,7 @@ static void gen5_gt_irq_postinstall(struct drm_device *dev) dev_priv->pm_irq_mask = 0xffffffff; I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR)); - I915_WRITE(GEN6_PMIMR, dev_priv->pm_irq_mask); - I915_WRITE(GEN6_PMIER, pm_irqs); - POSTING_READ(GEN6_PMIER); + GEN5_IRQ_INIT(GEN6_PM, dev_priv->pm_irq_mask, pm_irqs); } } @@ -3055,9 +3063,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev) /* should always can generate irq */ I915_WRITE(DEIIR, I915_READ(DEIIR)); - I915_WRITE(DEIMR, dev_priv->irq_mask); - I915_WRITE(DEIER, display_mask | extra_mask); - POSTING_READ(DEIER); + GEN5_IRQ_INIT(DE, dev_priv->irq_mask, display_mask | extra_mask); gen5_gt_irq_postinstall(dev); @@ -3222,10 +3228,8 @@ static void gen8_gt_irq_postinstall(struct drm_i915_private *dev_priv) if (tmp) DRM_ERROR("Interrupt (%d) should have been masked in pre-install 0x%08x\n", i, tmp); - I915_WRITE(GEN8_GT_IMR(i), ~gt_interrupts[i]); - I915_WRITE(GEN8_GT_IER(i), gt_interrupts[i]); + GEN8_IRQ_INIT_NDX(GT, i, ~gt_interrupts[i], gt_interrupts[i]); } - POSTING_READ(GEN8_GT_IER(0)); } static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv) @@ -3246,14 +3250,11 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv) if (tmp) DRM_ERROR("Interrupt (%d) should have been masked in pre-install 0x%08x\n", pipe, tmp); - I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]); - I915_WRITE(GEN8_DE_PIPE_IER(pipe), de_pipe_enables); + GEN8_IRQ_INIT_NDX(DE_PIPE, pipe, dev_priv->de_irq_mask[pipe], + de_pipe_enables); } - POSTING_READ(GEN8_DE_PIPE_ISR(0)); - I915_WRITE(GEN8_DE_PORT_IMR, ~GEN8_AUX_CHANNEL_A); - I915_WRITE(GEN8_DE_PORT_IER, GEN8_AUX_CHANNEL_A); - POSTING_READ(GEN8_DE_PORT_IER); + GEN5_IRQ_INIT(GEN8_DE_PORT_, ~GEN8_AUX_CHANNEL_A, GEN8_AUX_CHANNEL_A); } static int gen8_irq_postinstall(struct drm_device *dev) -- cgit v1.2.3 From 337ba0175f49b2d3a0bcc893f97f539bda831007 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:16 -0300 Subject: drm/i915: check if IIR is still zero at postinstall on Gen5+ It should already be masked and disabled and zeroed at the preinstall and uninstall stages. Also, the current code just writes to IIR once, and this is not a guarantee that it will be cleared, so it's wrong anyway. The whole reason for the paranoia is that we're going to start calling the IRQ preinstall/postinstall/uninstall from the runtime PM callbacks, so we need to make sure everything is behaving as expected. v2: - Change the original DRM_ERROR to WARN and clear IIR in case it's not zero (Ben). - Improve commit message (Daniel). Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 37 ++++++++++++++++++++----------------- 1 file changed, 20 insertions(+), 17 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index ef4adf65e311..65e901ed1af8 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -101,13 +101,30 @@ static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */ POSTING_READ(type##IIR); \ } while (0) +/* + * We should clear IMR at preinstall/uninstall, and just check at postinstall. + */ +#define GEN5_ASSERT_IIR_IS_ZERO(reg) do { \ + u32 val = I915_READ(reg); \ + if (val) { \ + WARN(1, "Interrupt register 0x%x is not zero: 0x%08x\n", \ + (reg), val); \ + I915_WRITE((reg), 0xffffffff); \ + POSTING_READ(reg); \ + I915_WRITE((reg), 0xffffffff); \ + POSTING_READ(reg); \ + } \ +} while (0) + #define GEN8_IRQ_INIT_NDX(type, which, imr_val, ier_val) do { \ + GEN5_ASSERT_IIR_IS_ZERO(GEN8_##type##_IIR(which)); \ I915_WRITE(GEN8_##type##_IMR(which), (imr_val)); \ I915_WRITE(GEN8_##type##_IER(which), (ier_val)); \ POSTING_READ(GEN8_##type##_IER(which)); \ } while (0) #define GEN5_IRQ_INIT(type, imr_val, ier_val) do { \ + GEN5_ASSERT_IIR_IS_ZERO(type##IIR); \ I915_WRITE(type##IMR, (imr_val)); \ I915_WRITE(type##IER, (ier_val)); \ POSTING_READ(type##IER); \ @@ -2993,7 +3010,7 @@ static void ibx_irq_postinstall(struct drm_device *dev) I915_WRITE(SERR_INT, I915_READ(SERR_INT)); } - I915_WRITE(SDEIIR, I915_READ(SDEIIR)); + GEN5_ASSERT_IIR_IS_ZERO(SDEIIR); I915_WRITE(SDEIMR, ~mask); } @@ -3019,7 +3036,6 @@ static void gen5_gt_irq_postinstall(struct drm_device *dev) gt_irqs |= GT_BLT_USER_INTERRUPT | GT_BSD_USER_INTERRUPT; } - I915_WRITE(GTIIR, I915_READ(GTIIR)); GEN5_IRQ_INIT(GT, dev_priv->gt_irq_mask, gt_irqs); if (INTEL_INFO(dev)->gen >= 6) { @@ -3029,7 +3045,6 @@ static void gen5_gt_irq_postinstall(struct drm_device *dev) pm_irqs |= PM_VEBOX_USER_INTERRUPT; dev_priv->pm_irq_mask = 0xffffffff; - I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR)); GEN5_IRQ_INIT(GEN6_PM, dev_priv->pm_irq_mask, pm_irqs); } } @@ -3061,8 +3076,6 @@ static int ironlake_irq_postinstall(struct drm_device *dev) dev_priv->irq_mask = ~display_mask; - /* should always can generate irq */ - I915_WRITE(DEIIR, I915_READ(DEIIR)); GEN5_IRQ_INIT(DE, dev_priv->irq_mask, display_mask | extra_mask); gen5_gt_irq_postinstall(dev); @@ -3223,13 +3236,8 @@ static void gen8_gt_irq_postinstall(struct drm_i915_private *dev_priv) GT_RENDER_USER_INTERRUPT << GEN8_VECS_IRQ_SHIFT }; - for (i = 0; i < ARRAY_SIZE(gt_interrupts); i++) { - u32 tmp = I915_READ(GEN8_GT_IIR(i)); - if (tmp) - DRM_ERROR("Interrupt (%d) should have been masked in pre-install 0x%08x\n", - i, tmp); + for (i = 0; i < ARRAY_SIZE(gt_interrupts); i++) GEN8_IRQ_INIT_NDX(GT, i, ~gt_interrupts[i], gt_interrupts[i]); - } } static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv) @@ -3245,14 +3253,9 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv) dev_priv->de_irq_mask[PIPE_B] = ~de_pipe_masked; dev_priv->de_irq_mask[PIPE_C] = ~de_pipe_masked; - for_each_pipe(pipe) { - u32 tmp = I915_READ(GEN8_DE_PIPE_IIR(pipe)); - if (tmp) - DRM_ERROR("Interrupt (%d) should have been masked in pre-install 0x%08x\n", - pipe, tmp); + for_each_pipe(pipe) GEN8_IRQ_INIT_NDX(DE_PIPE, pipe, dev_priv->de_irq_mask[pipe], de_pipe_enables); - } GEN5_IRQ_INIT(GEN8_DE_PORT_, ~GEN8_AUX_CHANNEL_A, GEN8_AUX_CHANNEL_A); } -- cgit v1.2.3 From 105b122eff8f24de256fdb32e27209af8405ab14 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:17 -0300 Subject: drm/i915: fix SERR_INT init/reset code The SERR_INT register is very similar to the other IIR registers, so let's zero it at preinstall/uninstall and WARN for a non-zero value at postinstall, just like we do with the other IIR registers. For this one, there's no need to double-clear since it can't store more than one interrupt. v2: - Remove the is_zero assertion (Ben). Reviewed-by: Ben Widawsky Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 65e901ed1af8..bfb7e14e14df 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2872,6 +2872,10 @@ static void ibx_irq_preinstall(struct drm_device *dev) return; GEN5_IRQ_RESET(SDE); + + if (HAS_PCH_CPT(dev) || HAS_PCH_LPT(dev)) + I915_WRITE(SERR_INT, 0xffffffff); + /* * SDEIER is also touched by the interrupt handler to work around missed * PCH interrupts. Hence we can't update it after the interrupt handler @@ -3002,14 +3006,11 @@ static void ibx_irq_postinstall(struct drm_device *dev) if (HAS_PCH_NOP(dev)) return; - if (HAS_PCH_IBX(dev)) { + if (HAS_PCH_IBX(dev)) mask = SDE_GMBUS | SDE_AUX_MASK | SDE_POISON; - } else { + else mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT; - I915_WRITE(SERR_INT, I915_READ(SERR_INT)); - } - GEN5_ASSERT_IIR_IS_ZERO(SDEIIR); I915_WRITE(SDEIMR, ~mask); } @@ -3353,7 +3354,7 @@ static void ironlake_irq_uninstall(struct drm_device *dev) GEN5_IRQ_RESET(SDE); if (HAS_PCH_CPT(dev) || HAS_PCH_LPT(dev)) - I915_WRITE(SERR_INT, I915_READ(SERR_INT)); + I915_WRITE(SERR_INT, 0xffffffff); } static void i8xx_irq_preinstall(struct drm_device * dev) -- cgit v1.2.3 From c6d954c173b65c8c3b2fedba2bb9c9e349bbcdd6 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:18 -0300 Subject: drm/i915: fix GEN7_ERR_INT init/reset code Same as SERR_INT and the other IIR registers: reset on preinstall/uninstall and WARN for non-zero values at postinstall. This one also doesn't need double-clear. v2: - Remove the is_zero assertion (Ben). Reviewed-by: Ben Widawsky Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index bfb7e14e14df..ace370323a28 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2905,6 +2905,9 @@ static void ironlake_irq_preinstall(struct drm_device *dev) GEN5_IRQ_RESET(DE); + if (IS_GEN7(dev)) + I915_WRITE(GEN7_ERR_INT, 0xffffffff); + gen5_gt_irq_preinstall(dev); ibx_irq_preinstall(dev); @@ -3063,8 +3066,6 @@ static int ironlake_irq_postinstall(struct drm_device *dev) DE_PLANEA_FLIP_DONE_IVB | DE_AUX_CHANNEL_A_IVB); extra_mask = (DE_PIPEC_VBLANK_IVB | DE_PIPEB_VBLANK_IVB | DE_PIPEA_VBLANK_IVB | DE_ERR_INT_IVB); - - I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT)); } else { display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE | @@ -3343,7 +3344,7 @@ static void ironlake_irq_uninstall(struct drm_device *dev) GEN5_IRQ_RESET(DE); if (IS_GEN7(dev)) - I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT)); + I915_WRITE(GEN7_ERR_INT, 0xffffffff); GEN5_IRQ_RESET(GT); if (INTEL_INFO(dev)->gen >= 6) -- cgit v1.2.3 From 7c4d664e03c9b12572356a6ce8e69c7d59e6f4f7 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:19 -0300 Subject: drm/i915: fix open coded gen5_gt_irq_preinstall The duplicate was at an _uninstall function, so rename it to gen5_gt_irq_reset. v2: - Rebase. Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index ace370323a28..5e1a6d330c8c 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2886,7 +2886,7 @@ static void ibx_irq_preinstall(struct drm_device *dev) POSTING_READ(SDEIER); } -static void gen5_gt_irq_preinstall(struct drm_device *dev) +static void gen5_gt_irq_reset(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -2908,7 +2908,7 @@ static void ironlake_irq_preinstall(struct drm_device *dev) if (IS_GEN7(dev)) I915_WRITE(GEN7_ERR_INT, 0xffffffff); - gen5_gt_irq_preinstall(dev); + gen5_gt_irq_reset(dev); ibx_irq_preinstall(dev); } @@ -2928,7 +2928,7 @@ static void valleyview_irq_preinstall(struct drm_device *dev) I915_WRITE(GTIIR, I915_READ(GTIIR)); I915_WRITE(GTIIR, I915_READ(GTIIR)); - gen5_gt_irq_preinstall(dev); + gen5_gt_irq_reset(dev); I915_WRITE(DPINVGTT, 0xff); @@ -3346,9 +3346,7 @@ static void ironlake_irq_uninstall(struct drm_device *dev) if (IS_GEN7(dev)) I915_WRITE(GEN7_ERR_INT, 0xffffffff); - GEN5_IRQ_RESET(GT); - if (INTEL_INFO(dev)->gen >= 6) - GEN5_IRQ_RESET(GEN6_PM); + gen5_gt_irq_reset(dev); if (HAS_PCH_NOP(dev)) return; -- cgit v1.2.3 From efbd3fc3d0111812d12f4c8a8b5d2d20d2ce5654 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:20 -0300 Subject: drm/i915: extract ibx_irq_uninstall Just like ibx_irq_preinstall. We'll call this from somewhere else in the next patch. Reviewed-by: Ben Widawsky Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 5e1a6d330c8c..ad2c3de8766b 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2904,7 +2904,6 @@ static void ironlake_irq_preinstall(struct drm_device *dev) I915_WRITE(HWSTAM, 0xeffe); GEN5_IRQ_RESET(DE); - if (IS_GEN7(dev)) I915_WRITE(GEN7_ERR_INT, 0xffffffff); @@ -3277,6 +3276,19 @@ static int gen8_irq_postinstall(struct drm_device *dev) return 0; } +static void ibx_irq_uninstall(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (HAS_PCH_NOP(dev)) + return; + + GEN5_IRQ_RESET(SDE); + + if (HAS_PCH_CPT(dev) || HAS_PCH_LPT(dev)) + I915_WRITE(SERR_INT, 0xffffffff); +} + static void gen8_irq_uninstall(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -3348,12 +3360,7 @@ static void ironlake_irq_uninstall(struct drm_device *dev) gen5_gt_irq_reset(dev); - if (HAS_PCH_NOP(dev)) - return; - - GEN5_IRQ_RESET(SDE); - if (HAS_PCH_CPT(dev) || HAS_PCH_LPT(dev)) - I915_WRITE(SERR_INT, 0xffffffff); + ibx_irq_uninstall(dev); } static void i8xx_irq_preinstall(struct drm_device * dev) -- cgit v1.2.3 From 8f6ff03dc0046479eb676624d6f8f4a263155b98 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:21 -0300 Subject: drm/i915: call ibx_irq_uninstall from gen8_irq_uninstall After all, we call ibx_irq_preinstall from gen8_irq_preinstall. v2: - Rebase. Reviewed-by: Ben Widawsky Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index ad2c3de8766b..1f601ef8a010 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -3310,6 +3310,8 @@ static void gen8_irq_uninstall(struct drm_device *dev) GEN5_IRQ_RESET(GEN8_DE_PORT_); GEN5_IRQ_RESET(GEN8_DE_MISC_); GEN5_IRQ_RESET(GEN8_PCU_); + + ibx_irq_uninstall(dev); } static void valleyview_irq_uninstall(struct drm_device *dev) -- cgit v1.2.3 From 622364b667e9189ce73e61fc1dba34ea1ead33b0 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:22 -0300 Subject: drm/i915: enable SDEIER later On the preinstall stage we should just disable all the interrupts, but we currently enable all the south display interrupts due to the way we touch SDEIER at the IRQ handlers (note: they are still masked and our IRQ handler is disabled). Instead of doing that, let's make the preinstall stage just disable all the south interrupts, and do the proper interrupt dance/ordering at the postinstall stage, including an assert to check if everything is behaving as expected. Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 1f601ef8a010..0b03c5525303 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2875,13 +2875,24 @@ static void ibx_irq_preinstall(struct drm_device *dev) if (HAS_PCH_CPT(dev) || HAS_PCH_LPT(dev)) I915_WRITE(SERR_INT, 0xffffffff); +} - /* - * SDEIER is also touched by the interrupt handler to work around missed - * PCH interrupts. Hence we can't update it after the interrupt handler - * is enabled - instead we unconditionally enable all PCH interrupt - * sources here, but then only unmask them as needed with SDEIMR. - */ +/* + * SDEIER is also touched by the interrupt handler to work around missed PCH + * interrupts. Hence we can't update it after the interrupt handler is enabled - + * instead we unconditionally enable all PCH interrupt sources here, but then + * only unmask them as needed with SDEIMR. + * + * This function needs to be called before interrupts are enabled. + */ +static void ibx_irq_pre_postinstall(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (HAS_PCH_NOP(dev)) + return; + + WARN_ON(I915_READ(SDEIER) != 0); I915_WRITE(SDEIER, 0xffffffff); POSTING_READ(SDEIER); } @@ -3077,6 +3088,8 @@ static int ironlake_irq_postinstall(struct drm_device *dev) dev_priv->irq_mask = ~display_mask; + ibx_irq_pre_postinstall(dev); + GEN5_IRQ_INIT(DE, dev_priv->irq_mask, display_mask | extra_mask); gen5_gt_irq_postinstall(dev); @@ -3265,6 +3278,8 @@ static int gen8_irq_postinstall(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + ibx_irq_pre_postinstall(dev); + gen8_gt_irq_postinstall(dev_priv); gen8_de_irq_postinstall(dev_priv); -- cgit v1.2.3 From 1c69eb42b781eef6a1a1782147ba70cb6771e5c4 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:23 -0300 Subject: drm/i915: remove ibx_irq_uninstall After the latest changes, ibx_irq_preinstall and ibx_irq_uninstall are the same, so remove one of the copies and rename the other to ibx_irq_reset (since we're using the "reset" name for things which are called both at preinstall and uninstall). v2: - Rebase. Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 23 +++++------------------ 1 file changed, 5 insertions(+), 18 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 0b03c5525303..b69b7b20985a 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2864,7 +2864,7 @@ void i915_queue_hangcheck(struct drm_device *dev) round_jiffies_up(jiffies + DRM_I915_HANGCHECK_JIFFIES)); } -static void ibx_irq_preinstall(struct drm_device *dev) +static void ibx_irq_reset(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -2920,7 +2920,7 @@ static void ironlake_irq_preinstall(struct drm_device *dev) gen5_gt_irq_reset(dev); - ibx_irq_preinstall(dev); + ibx_irq_reset(dev); } static void valleyview_irq_preinstall(struct drm_device *dev) @@ -2973,7 +2973,7 @@ static void gen8_irq_preinstall(struct drm_device *dev) GEN5_IRQ_RESET(GEN8_DE_MISC_); GEN5_IRQ_RESET(GEN8_PCU_); - ibx_irq_preinstall(dev); + ibx_irq_reset(dev); } static void ibx_hpd_irq_setup(struct drm_device *dev) @@ -3291,19 +3291,6 @@ static int gen8_irq_postinstall(struct drm_device *dev) return 0; } -static void ibx_irq_uninstall(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - - if (HAS_PCH_NOP(dev)) - return; - - GEN5_IRQ_RESET(SDE); - - if (HAS_PCH_CPT(dev) || HAS_PCH_LPT(dev)) - I915_WRITE(SERR_INT, 0xffffffff); -} - static void gen8_irq_uninstall(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -3326,7 +3313,7 @@ static void gen8_irq_uninstall(struct drm_device *dev) GEN5_IRQ_RESET(GEN8_DE_MISC_); GEN5_IRQ_RESET(GEN8_PCU_); - ibx_irq_uninstall(dev); + ibx_irq_reset(dev); } static void valleyview_irq_uninstall(struct drm_device *dev) @@ -3377,7 +3364,7 @@ static void ironlake_irq_uninstall(struct drm_device *dev) gen5_gt_irq_reset(dev); - ibx_irq_uninstall(dev); + ibx_irq_reset(dev); } static void i8xx_irq_preinstall(struct drm_device * dev) -- cgit v1.2.3 From d4eb6b10fcff869969f5c254f6dee6864647accf Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:24 -0300 Subject: drm/i915: add missing intel_hpd_irq_uninstall Missing from gen8_irq_uninstall. Reviewed-by: Ben Widawsky Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index b69b7b20985a..ee89a259894c 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -3299,6 +3299,8 @@ static void gen8_irq_uninstall(struct drm_device *dev) if (!dev_priv) return; + intel_hpd_irq_uninstall(dev_priv); + I915_WRITE(GEN8_MASTER_IRQ, 0); GEN8_IRQ_RESET_NDX(GT, 0); -- cgit v1.2.3 From be30b29fa9d5c9672f2e95abfe0faca3f733c8fc Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:25 -0300 Subject: drm/i915: add ironlake_irq_reset To merge the common code of ironlake_irq_preinstall and ironlake_irq_uninstall. We should also probably do something about that HSWSTAM write on a later commit. Signed-off-by: Paulo Zanoni [danvet: Fix compile fail due to drm_i915_private_t typedef removal.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index ee89a259894c..e206a8a98866 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2908,12 +2908,10 @@ static void gen5_gt_irq_reset(struct drm_device *dev) /* drm_dma.h hooks */ -static void ironlake_irq_preinstall(struct drm_device *dev) +static void ironlake_irq_reset(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - I915_WRITE(HWSTAM, 0xeffe); - GEN5_IRQ_RESET(DE); if (IS_GEN7(dev)) I915_WRITE(GEN7_ERR_INT, 0xffffffff); @@ -2923,6 +2921,15 @@ static void ironlake_irq_preinstall(struct drm_device *dev) ibx_irq_reset(dev); } +static void ironlake_irq_preinstall(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(HWSTAM, 0xeffe); + + ironlake_irq_reset(dev); +} + static void valleyview_irq_preinstall(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -3360,13 +3367,7 @@ static void ironlake_irq_uninstall(struct drm_device *dev) I915_WRITE(HWSTAM, 0xffffffff); - GEN5_IRQ_RESET(DE); - if (IS_GEN7(dev)) - I915_WRITE(GEN7_ERR_INT, 0xffffffff); - - gen5_gt_irq_reset(dev); - - ibx_irq_reset(dev); + ironlake_irq_reset(dev); } static void i8xx_irq_preinstall(struct drm_device * dev) -- cgit v1.2.3 From 823f6b38e85c1d5439ec5c18d7574e22440e44a0 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:26 -0300 Subject: drm/i915: add gen8_irq_reset So we can merge all the common code from postinstall and uninstall. v2: - Rebase. - While at it, remove useless { and }. Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 27 ++++++++------------------- 1 file changed, 8 insertions(+), 19 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index e206a8a98866..26fec6cdfc68 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2959,7 +2959,7 @@ static void valleyview_irq_preinstall(struct drm_device *dev) POSTING_READ(VLV_IER); } -static void gen8_irq_preinstall(struct drm_device *dev) +static void gen8_irq_reset(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int pipe; @@ -2972,9 +2972,8 @@ static void gen8_irq_preinstall(struct drm_device *dev) GEN8_IRQ_RESET_NDX(GT, 2); GEN8_IRQ_RESET_NDX(GT, 3); - for_each_pipe(pipe) { + for_each_pipe(pipe) GEN8_IRQ_RESET_NDX(DE_PIPE, pipe); - } GEN5_IRQ_RESET(GEN8_DE_PORT_); GEN5_IRQ_RESET(GEN8_DE_MISC_); @@ -2983,6 +2982,11 @@ static void gen8_irq_preinstall(struct drm_device *dev) ibx_irq_reset(dev); } +static void gen8_irq_preinstall(struct drm_device *dev) +{ + gen8_irq_reset(dev); +} + static void ibx_hpd_irq_setup(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -3301,28 +3305,13 @@ static int gen8_irq_postinstall(struct drm_device *dev) static void gen8_irq_uninstall(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - int pipe; if (!dev_priv) return; intel_hpd_irq_uninstall(dev_priv); - I915_WRITE(GEN8_MASTER_IRQ, 0); - - GEN8_IRQ_RESET_NDX(GT, 0); - GEN8_IRQ_RESET_NDX(GT, 1); - GEN8_IRQ_RESET_NDX(GT, 2); - GEN8_IRQ_RESET_NDX(GT, 3); - - for_each_pipe(pipe) - GEN8_IRQ_RESET_NDX(DE_PIPE, pipe); - - GEN5_IRQ_RESET(GEN8_DE_PORT_); - GEN5_IRQ_RESET(GEN8_DE_MISC_); - GEN5_IRQ_RESET(GEN8_PCU_); - - ibx_irq_reset(dev); + gen8_irq_reset(dev); } static void valleyview_irq_uninstall(struct drm_device *dev) -- cgit v1.2.3 From 0c84121202bf8b9debd1efae9c6b500330eb24c5 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 15:37:27 -0300 Subject: drm/i915: only enable HWSTAM interrupts on postinstall on ILK+ We should only enable interrupts at postinstall. And now on ILK/SNB/IVB/HSW the irq_preinstall and irq_postinstall functions leave the hardware in the same state. Signed-off-by: Paulo Zanoni [danvet: Fix compile fail due to drm_i915_private_t typedef removal.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 26fec6cdfc68..75f19979b8f7 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2912,6 +2912,8 @@ static void ironlake_irq_reset(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + I915_WRITE(HWSTAM, 0xffffffff); + GEN5_IRQ_RESET(DE); if (IS_GEN7(dev)) I915_WRITE(GEN7_ERR_INT, 0xffffffff); @@ -2923,10 +2925,6 @@ static void ironlake_irq_reset(struct drm_device *dev) static void ironlake_irq_preinstall(struct drm_device *dev) { - struct drm_i915_private *dev_priv = dev->dev_private; - - I915_WRITE(HWSTAM, 0xeffe); - ironlake_irq_reset(dev); } @@ -3099,6 +3097,8 @@ static int ironlake_irq_postinstall(struct drm_device *dev) dev_priv->irq_mask = ~display_mask; + I915_WRITE(HWSTAM, 0xeffe); + ibx_irq_pre_postinstall(dev); GEN5_IRQ_INIT(DE, dev_priv->irq_mask, display_mask | extra_mask); @@ -3354,8 +3354,6 @@ static void ironlake_irq_uninstall(struct drm_device *dev) intel_hpd_irq_uninstall(dev_priv); - I915_WRITE(HWSTAM, 0xffffffff); - ironlake_irq_reset(dev); } -- cgit v1.2.3 From 730488b2eddded4497f63f70867b1256cd9e117c Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 7 Mar 2014 20:12:32 -0300 Subject: drm/i915: kill dev_priv->pm.regsave Now that we don't keep the hotplug interrupts enabled anymore, we can kill the regsave struct and just cal the normal IRQ preinstall, postinstall and uninstall functions. This makes it easier to add runtime PM support to non-HSW platforms. The only downside is in case we get a request to update interrupts while they are disabled, won't be able to update the regsave struct. But this should never happen anyway, so we're not losing too much. v2: - Rebase. v3: - Rebase. v4: - Rebase. Signed-off-by: Paulo Zanoni Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 12 +----- drivers/gpu/drm/i915/i915_irq.c | 79 +++++------------------------------- drivers/gpu/drm/i915/intel_display.c | 4 +- drivers/gpu/drm/i915/intel_drv.h | 4 +- 4 files changed, 15 insertions(+), 84 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 828886009ef4..9b635f5db989 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1212,23 +1212,13 @@ struct ilk_wm_values { * goes back to false exactly before we reenable the IRQs. We use this variable * to check if someone is trying to enable/disable IRQs while they're supposed * to be disabled. This shouldn't happen and we'll print some error messages in - * case it happens, but if it actually happens we'll also update the variables - * inside struct regsave so when we restore the IRQs they will contain the - * latest expected values. + * case it happens. * * For more, read the Documentation/power/runtime_pm.txt. */ struct i915_runtime_pm { bool suspended; bool irqs_disabled; - - struct { - uint32_t deimr; - uint32_t sdeimr; - uint32_t gtimr; - uint32_t gtier; - uint32_t gen6_pmimr; - } regsave; }; enum intel_pipe_crc_source { diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 75f19979b8f7..327d584e4353 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -136,11 +136,8 @@ ironlake_enable_display_irq(struct drm_i915_private *dev_priv, u32 mask) { assert_spin_locked(&dev_priv->irq_lock); - if (dev_priv->pm.irqs_disabled) { - WARN(1, "IRQs disabled\n"); - dev_priv->pm.regsave.deimr &= ~mask; + if (WARN_ON(dev_priv->pm.irqs_disabled)) return; - } if ((dev_priv->irq_mask & mask) != 0) { dev_priv->irq_mask &= ~mask; @@ -154,11 +151,8 @@ ironlake_disable_display_irq(struct drm_i915_private *dev_priv, u32 mask) { assert_spin_locked(&dev_priv->irq_lock); - if (dev_priv->pm.irqs_disabled) { - WARN(1, "IRQs disabled\n"); - dev_priv->pm.regsave.deimr |= mask; + if (WARN_ON(dev_priv->pm.irqs_disabled)) return; - } if ((dev_priv->irq_mask & mask) != mask) { dev_priv->irq_mask |= mask; @@ -179,13 +173,8 @@ static void ilk_update_gt_irq(struct drm_i915_private *dev_priv, { assert_spin_locked(&dev_priv->irq_lock); - if (dev_priv->pm.irqs_disabled) { - WARN(1, "IRQs disabled\n"); - dev_priv->pm.regsave.gtimr &= ~interrupt_mask; - dev_priv->pm.regsave.gtimr |= (~enabled_irq_mask & - interrupt_mask); + if (WARN_ON(dev_priv->pm.irqs_disabled)) return; - } dev_priv->gt_irq_mask &= ~interrupt_mask; dev_priv->gt_irq_mask |= (~enabled_irq_mask & interrupt_mask); @@ -217,13 +206,8 @@ static void snb_update_pm_irq(struct drm_i915_private *dev_priv, assert_spin_locked(&dev_priv->irq_lock); - if (dev_priv->pm.irqs_disabled) { - WARN(1, "IRQs disabled\n"); - dev_priv->pm.regsave.gen6_pmimr &= ~interrupt_mask; - dev_priv->pm.regsave.gen6_pmimr |= (~enabled_irq_mask & - interrupt_mask); + if (WARN_ON(dev_priv->pm.irqs_disabled)) return; - } new_val = dev_priv->pm_irq_mask; new_val &= ~interrupt_mask; @@ -363,14 +347,8 @@ static void ibx_display_interrupt_update(struct drm_i915_private *dev_priv, assert_spin_locked(&dev_priv->irq_lock); - if (dev_priv->pm.irqs_disabled && - (interrupt_mask & SDE_HOTPLUG_MASK_CPT)) { - WARN(1, "IRQs disabled\n"); - dev_priv->pm.regsave.sdeimr &= ~interrupt_mask; - dev_priv->pm.regsave.sdeimr |= (~enabled_irq_mask & - interrupt_mask); + if (WARN_ON(dev_priv->pm.irqs_disabled)) return; - } I915_WRITE(SDEIMR, sdeimr); POSTING_READ(SDEIMR); @@ -4126,57 +4104,20 @@ void intel_hpd_init(struct drm_device *dev) } /* Disable interrupts so we can allow runtime PM. */ -void hsw_runtime_pm_disable_interrupts(struct drm_device *dev) +void intel_runtime_pm_disable_interrupts(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - unsigned long irqflags; - - spin_lock_irqsave(&dev_priv->irq_lock, irqflags); - - dev_priv->pm.regsave.deimr = I915_READ(DEIMR); - dev_priv->pm.regsave.sdeimr = I915_READ(SDEIMR); - dev_priv->pm.regsave.gtimr = I915_READ(GTIMR); - dev_priv->pm.regsave.gtier = I915_READ(GTIER); - dev_priv->pm.regsave.gen6_pmimr = I915_READ(GEN6_PMIMR); - - ironlake_disable_display_irq(dev_priv, 0xffffffff); - ibx_disable_display_interrupt(dev_priv, 0xffffffff); - ilk_disable_gt_irq(dev_priv, 0xffffffff); - snb_disable_pm_irq(dev_priv, 0xffffffff); + dev->driver->irq_uninstall(dev); dev_priv->pm.irqs_disabled = true; - - spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } /* Restore interrupts so we can recover from runtime PM. */ -void hsw_runtime_pm_restore_interrupts(struct drm_device *dev) +void intel_runtime_pm_restore_interrupts(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - unsigned long irqflags; - uint32_t val; - - spin_lock_irqsave(&dev_priv->irq_lock, irqflags); - - val = I915_READ(DEIMR); - WARN(val != 0xffffffff, "DEIMR is 0x%08x\n", val); - - val = I915_READ(SDEIMR); - WARN(val != 0xffffffff, "SDEIMR is 0x%08x\n", val); - - val = I915_READ(GTIMR); - WARN(val != 0xffffffff, "GTIMR is 0x%08x\n", val); - - val = I915_READ(GEN6_PMIMR); - WARN(val != 0xffffffff, "GEN6_PMIMR is 0x%08x\n", val); dev_priv->pm.irqs_disabled = false; - - ironlake_enable_display_irq(dev_priv, ~dev_priv->pm.regsave.deimr); - ibx_enable_display_interrupt(dev_priv, ~dev_priv->pm.regsave.sdeimr); - ilk_enable_gt_irq(dev_priv, ~dev_priv->pm.regsave.gtimr); - snb_enable_pm_irq(dev_priv, ~dev_priv->pm.regsave.gen6_pmimr); - I915_WRITE(GTIER, dev_priv->pm.regsave.gtier); - - spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); + dev->driver->irq_preinstall(dev); + dev->driver->irq_postinstall(dev); } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index fe1d6e41c42a..6d252501c724 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7050,7 +7050,7 @@ void hsw_enable_pc8(struct drm_i915_private *dev_priv) } lpt_disable_clkout_dp(dev); - hsw_runtime_pm_disable_interrupts(dev); + intel_runtime_pm_disable_interrupts(dev); hsw_disable_lcpll(dev_priv, true, true); } @@ -7064,7 +7064,7 @@ void hsw_disable_pc8(struct drm_i915_private *dev_priv) DRM_DEBUG_KMS("Disabling package C8+\n"); hsw_restore_lcpll(dev_priv); - hsw_runtime_pm_restore_interrupts(dev); + intel_runtime_pm_restore_interrupts(dev); lpt_init_pch_refclk(dev); if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) { diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 7b21571bb928..42762b798cb0 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -627,8 +627,8 @@ void ilk_enable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask); void ilk_disable_gt_irq(struct drm_i915_private *dev_priv, uint32_t mask); void snb_enable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask); void snb_disable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask); -void hsw_runtime_pm_disable_interrupts(struct drm_device *dev); -void hsw_runtime_pm_restore_interrupts(struct drm_device *dev); +void intel_runtime_pm_disable_interrupts(struct drm_device *dev); +void intel_runtime_pm_restore_interrupts(struct drm_device *dev); /* intel_crt.c */ -- cgit v1.2.3 From 97bea20794f600ae9248bef296e3b62d12087a1e Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 7 Mar 2014 20:12:33 -0300 Subject: drm/i915: add gen-specific runtime suspend/resume functions We're adding runtime suspend support to more platforms, so organize the code in a way that all a new platform needs to do is to add its own gen-specific functions. Also rename the i915_ functions to intel_ to make it clear that it's the top level one, not something that just runs on i915 platforms. Signed-off-by: Paulo Zanoni Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 11f77a8e4c4d..b3600cbb81cf 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -833,7 +833,23 @@ static int i915_pm_poweroff(struct device *dev) return i915_drm_freeze(drm_dev); } -static int i915_runtime_suspend(struct device *device) +static void hsw_runtime_suspend(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + + if (HAS_PC8(dev)) + hsw_enable_pc8(dev_priv); +} + +static void hsw_runtime_resume(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + + if (HAS_PC8(dev)) + hsw_disable_pc8(dev_priv); +} + +static int intel_runtime_suspend(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); struct drm_device *dev = pci_get_drvdata(pdev); @@ -844,8 +860,8 @@ static int i915_runtime_suspend(struct device *device) DRM_DEBUG_KMS("Suspending device\n"); - if (HAS_PC8(dev)) - hsw_enable_pc8(dev_priv); + if (IS_HASWELL(dev)) + hsw_runtime_suspend(dev_priv); i915_gem_release_all_mmaps(dev_priv); @@ -865,7 +881,7 @@ static int i915_runtime_suspend(struct device *device) return 0; } -static int i915_runtime_resume(struct device *device) +static int intel_runtime_resume(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); struct drm_device *dev = pci_get_drvdata(pdev); @@ -878,8 +894,8 @@ static int i915_runtime_resume(struct device *device) intel_opregion_notify_adapter(dev, PCI_D0); dev_priv->pm.suspended = false; - if (HAS_PC8(dev)) - hsw_disable_pc8(dev_priv); + if (IS_HASWELL(dev)) + hsw_runtime_resume(dev_priv); DRM_DEBUG_KMS("Device resumed\n"); return 0; @@ -892,8 +908,8 @@ static const struct dev_pm_ops i915_pm_ops = { .thaw = i915_pm_thaw, .poweroff = i915_pm_poweroff, .restore = i915_pm_resume, - .runtime_suspend = i915_runtime_suspend, - .runtime_resume = i915_runtime_resume, + .runtime_suspend = intel_runtime_suspend, + .runtime_resume = intel_runtime_resume, }; static const struct vm_operations_struct i915_gem_vm_ops = { -- cgit v1.2.3 From 9a952a0d42ff089945ea3f5b3f690e45218d073f Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 7 Mar 2014 20:12:34 -0300 Subject: drm/i915: add SNB runtime PM support Just because I have a SNB machine and I can easily test it. Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 27 +++++++++++++++++++++++++-- drivers/gpu/drm/i915/i915_drv.h | 2 +- drivers/gpu/drm/i915/intel_display.c | 7 +++++++ 3 files changed, 33 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index b3600cbb81cf..1c53fd378785 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -833,6 +833,13 @@ static int i915_pm_poweroff(struct device *dev) return i915_drm_freeze(drm_dev); } +static void snb_runtime_suspend(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + + intel_runtime_pm_disable_interrupts(dev); +} + static void hsw_runtime_suspend(struct drm_i915_private *dev_priv) { struct drm_device *dev = dev_priv->dev; @@ -841,6 +848,18 @@ static void hsw_runtime_suspend(struct drm_i915_private *dev_priv) hsw_enable_pc8(dev_priv); } +static void snb_runtime_resume(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + + intel_runtime_pm_restore_interrupts(dev); + intel_init_pch_refclk(dev); + i915_gem_init_swizzling(dev); + mutex_lock(&dev_priv->rps.hw_lock); + gen6_update_ring_freq(dev); + mutex_unlock(&dev_priv->rps.hw_lock); +} + static void hsw_runtime_resume(struct drm_i915_private *dev_priv) { struct drm_device *dev = dev_priv->dev; @@ -860,7 +879,9 @@ static int intel_runtime_suspend(struct device *device) DRM_DEBUG_KMS("Suspending device\n"); - if (IS_HASWELL(dev)) + if (IS_GEN6(dev)) + snb_runtime_suspend(dev_priv); + else if (IS_HASWELL(dev)) hsw_runtime_suspend(dev_priv); i915_gem_release_all_mmaps(dev_priv); @@ -894,7 +915,9 @@ static int intel_runtime_resume(struct device *device) intel_opregion_notify_adapter(dev, PCI_D0); dev_priv->pm.suspended = false; - if (IS_HASWELL(dev)) + if (IS_GEN6(dev)) + snb_runtime_resume(dev_priv); + else if (IS_HASWELL(dev)) hsw_runtime_resume(dev_priv); DRM_DEBUG_KMS("Device resumed\n"); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 9b635f5db989..e5d424a7847a 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1866,7 +1866,7 @@ struct drm_i915_cmd_table { #define HAS_FPGA_DBG_UNCLAIMED(dev) (INTEL_INFO(dev)->has_fpga_dbg) #define HAS_PSR(dev) (IS_HASWELL(dev) || IS_BROADWELL(dev)) #define HAS_PC8(dev) (IS_HASWELL(dev)) /* XXX HSW:ULX */ -#define HAS_RUNTIME_PM(dev) (IS_HASWELL(dev)) +#define HAS_RUNTIME_PM(dev) (IS_GEN6(dev) || IS_HASWELL(dev)) #define INTEL_PCH_DEVICE_ID_MASK 0xff00 #define INTEL_PCH_IBX_DEVICE_ID_TYPE 0x3b00 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 6d252501c724..da07df85dc90 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7080,6 +7080,11 @@ void hsw_disable_pc8(struct drm_i915_private *dev_priv) mutex_unlock(&dev_priv->rps.hw_lock); } +static void snb_modeset_global_resources(struct drm_device *dev) +{ + modeset_update_crtc_power_domains(dev); +} + static void haswell_modeset_global_resources(struct drm_device *dev) { modeset_update_crtc_power_domains(dev); @@ -11040,6 +11045,8 @@ static void intel_init_display(struct drm_device *dev) } else if (IS_GEN6(dev)) { dev_priv->display.fdi_link_train = gen6_fdi_link_train; dev_priv->display.write_eld = ironlake_write_eld; + dev_priv->display.modeset_global_resources = + snb_modeset_global_resources; } else if (IS_IVYBRIDGE(dev)) { /* FIXME: detect B0+ stepping and use auto training */ dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train; -- cgit v1.2.3 From 414de7a02025b2ff4f972cf3240d0471ebd36692 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 7 Mar 2014 20:12:35 -0300 Subject: drm/i915: remove HAS_PC8 check Now that PC8 is part of runtime PM, the check is useless. Signed-off-by: Paulo Zanoni Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 10 ++-------- drivers/gpu/drm/i915/i915_drv.h | 1 - drivers/gpu/drm/i915/intel_display.c | 4 ---- 3 files changed, 2 insertions(+), 13 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 1c53fd378785..4b6c99dfe678 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -842,10 +842,7 @@ static void snb_runtime_suspend(struct drm_i915_private *dev_priv) static void hsw_runtime_suspend(struct drm_i915_private *dev_priv) { - struct drm_device *dev = dev_priv->dev; - - if (HAS_PC8(dev)) - hsw_enable_pc8(dev_priv); + hsw_enable_pc8(dev_priv); } static void snb_runtime_resume(struct drm_i915_private *dev_priv) @@ -862,10 +859,7 @@ static void snb_runtime_resume(struct drm_i915_private *dev_priv) static void hsw_runtime_resume(struct drm_i915_private *dev_priv) { - struct drm_device *dev = dev_priv->dev; - - if (HAS_PC8(dev)) - hsw_disable_pc8(dev_priv); + hsw_disable_pc8(dev_priv); } static int intel_runtime_suspend(struct device *device) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index e5d424a7847a..9be0cd8c998e 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1865,7 +1865,6 @@ struct drm_i915_cmd_table { #define HAS_DDI(dev) (INTEL_INFO(dev)->has_ddi) #define HAS_FPGA_DBG_UNCLAIMED(dev) (INTEL_INFO(dev)->has_fpga_dbg) #define HAS_PSR(dev) (IS_HASWELL(dev) || IS_BROADWELL(dev)) -#define HAS_PC8(dev) (IS_HASWELL(dev)) /* XXX HSW:ULX */ #define HAS_RUNTIME_PM(dev) (IS_GEN6(dev) || IS_HASWELL(dev)) #define INTEL_PCH_DEVICE_ID_MASK 0xff00 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index da07df85dc90..c72ba5828c34 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7039,8 +7039,6 @@ void hsw_enable_pc8(struct drm_i915_private *dev_priv) struct drm_device *dev = dev_priv->dev; uint32_t val; - WARN_ON(!HAS_PC8(dev)); - DRM_DEBUG_KMS("Enabling package C8+\n"); if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) { @@ -7059,8 +7057,6 @@ void hsw_disable_pc8(struct drm_i915_private *dev_priv) struct drm_device *dev = dev_priv->dev; uint32_t val; - WARN_ON(!HAS_PC8(dev)); - DRM_DEBUG_KMS("Disabling package C8+\n"); hsw_restore_lcpll(dev_priv); -- cgit v1.2.3 From 3c4c9b819f008267f56ca048b0601e206d9c977b Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 7 Mar 2014 20:12:36 -0300 Subject: drm/i915: BDW needs D_COMP writes through MCHBAR That's what the spec said! And HSW needs it through pcode (you can only read it through MCHBAR), so create hsw_write_dcomp to abstract the weirdness. Signed-off-by: Paulo Zanoni Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c72ba5828c34..044d3d78ce82 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6885,6 +6885,22 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv) spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } +static void hsw_write_dcomp(struct drm_i915_private *dev_priv, uint32_t val) +{ + struct drm_device *dev = dev_priv->dev; + + if (IS_HASWELL(dev)) { + mutex_lock(&dev_priv->rps.hw_lock); + if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, + val)) + DRM_ERROR("Failed to disable D_COMP\n"); + mutex_unlock(&dev_priv->rps.hw_lock); + } else { + I915_WRITE(D_COMP, val); + } + POSTING_READ(D_COMP); +} + /* * This function implements pieces of two sequences from BSpec: * - Sequence for display software to disable LCPLL @@ -6922,11 +6938,7 @@ static void hsw_disable_lcpll(struct drm_i915_private *dev_priv, val = I915_READ(D_COMP); val |= D_COMP_COMP_DISABLE; - mutex_lock(&dev_priv->rps.hw_lock); - if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val)) - DRM_ERROR("Failed to disable D_COMP\n"); - mutex_unlock(&dev_priv->rps.hw_lock); - POSTING_READ(D_COMP); + hsw_write_dcomp(dev_priv, val); ndelay(100); if (wait_for((I915_READ(D_COMP) & D_COMP_RCOMP_IN_PROGRESS) == 0, 1)) @@ -6981,11 +6993,7 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) val = I915_READ(D_COMP); val |= D_COMP_COMP_FORCE; val &= ~D_COMP_COMP_DISABLE; - mutex_lock(&dev_priv->rps.hw_lock); - if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val)) - DRM_ERROR("Failed to enable D_COMP\n"); - mutex_unlock(&dev_priv->rps.hw_lock); - POSTING_READ(D_COMP); + hsw_write_dcomp(dev_priv, val); val = I915_READ(LCPLL_CTL); val &= ~LCPLL_PLL_DISABLE; -- cgit v1.2.3 From 6157d3c83ac1a1815192464c540283e1bb2a321c Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 7 Mar 2014 20:12:37 -0300 Subject: drm/i915: add BDW runtime PM support This sould be enough. v2: BDW should also run hsw_runtime_resume (Ben). Signed-off-by: Paulo Zanoni Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 8 ++++++-- drivers/gpu/drm/i915/i915_drv.h | 3 ++- 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 4b6c99dfe678..a01faea0401c 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -875,8 +875,10 @@ static int intel_runtime_suspend(struct device *device) if (IS_GEN6(dev)) snb_runtime_suspend(dev_priv); - else if (IS_HASWELL(dev)) + else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) hsw_runtime_suspend(dev_priv); + else + WARN_ON(1); i915_gem_release_all_mmaps(dev_priv); @@ -911,8 +913,10 @@ static int intel_runtime_resume(struct device *device) if (IS_GEN6(dev)) snb_runtime_resume(dev_priv); - else if (IS_HASWELL(dev)) + else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) hsw_runtime_resume(dev_priv); + else + WARN_ON(1); DRM_DEBUG_KMS("Device resumed\n"); return 0; diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 9be0cd8c998e..508bc86b08a1 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1865,7 +1865,8 @@ struct drm_i915_cmd_table { #define HAS_DDI(dev) (INTEL_INFO(dev)->has_ddi) #define HAS_FPGA_DBG_UNCLAIMED(dev) (INTEL_INFO(dev)->has_fpga_dbg) #define HAS_PSR(dev) (IS_HASWELL(dev) || IS_BROADWELL(dev)) -#define HAS_RUNTIME_PM(dev) (IS_GEN6(dev) || IS_HASWELL(dev)) +#define HAS_RUNTIME_PM(dev) (IS_GEN6(dev) || IS_HASWELL(dev) || \ + IS_BROADWELL(dev)) #define INTEL_PCH_DEVICE_ID_MASK 0xff00 #define INTEL_PCH_IBX_DEVICE_ID_TYPE 0x3b00 -- cgit v1.2.3 From 64bed78820247eb6f0a0f90178f8530b6a78d423 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 31 Mar 2014 18:17:18 +0300 Subject: drm/i915: Implement WaProgramMiArbOnOffAroundMiSetContext:bdw MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit BSpec seems to tell us we need the MI_ARB_ON_OFF w/a around MI_SET_CONTEXT on gen8. Signed-off-by: Ville Syrjälä Reviewed-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_context.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c index 6043062ffce7..edbad2787d65 100644 --- a/drivers/gpu/drm/i915/i915_gem_context.c +++ b/drivers/gpu/drm/i915/i915_gem_context.c @@ -606,8 +606,8 @@ mi_set_context(struct intel_ring_buffer *ring, if (ret) return ret; - /* WaProgramMiArbOnOffAroundMiSetContext:ivb,vlv,hsw */ - if (IS_GEN7(ring->dev)) + /* WaProgramMiArbOnOffAroundMiSetContext:ivb,vlv,hsw,bdw */ + if (INTEL_INFO(ring->dev)->gen >= 7) intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_DISABLE); else intel_ring_emit(ring, MI_NOOP); @@ -625,7 +625,7 @@ mi_set_context(struct intel_ring_buffer *ring, */ intel_ring_emit(ring, MI_NOOP); - if (IS_GEN7(ring->dev)) + if (INTEL_INFO(ring->dev)->gen >= 7) intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_ENABLE); else intel_ring_emit(ring, MI_NOOP); -- cgit v1.2.3 From 13ffadd1f9fa2e19ecb054b063887dcd62dde2be Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Tue, 1 Apr 2014 16:31:07 -0700 Subject: drm/i915/bdw: Expand FADD to 64bit For error state, like the recent modification to ACTHD, FADD also gets an upper dword. This is useful for debug to make sure the fetch address and head are similar. Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 2 +- drivers/gpu/drm/i915/i915_gpu_error.c | 7 +++++-- drivers/gpu/drm/i915/i915_reg.h | 1 + 3 files changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 508bc86b08a1..0c10b7bd0727 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -359,7 +359,7 @@ struct drm_i915_error_state { u64 bbaddr; u64 acthd; u32 fault_reg; - u32 faddr; + u64 faddr; u32 rc_psmi; /* sleep state */ u32 semaphore_mboxes[I915_NUM_RINGS - 1]; diff --git a/drivers/gpu/drm/i915/i915_gpu_error.c b/drivers/gpu/drm/i915/i915_gpu_error.c index 12f1d43b2d68..1005af020a8e 100644 --- a/drivers/gpu/drm/i915/i915_gpu_error.c +++ b/drivers/gpu/drm/i915/i915_gpu_error.c @@ -257,7 +257,8 @@ static void i915_ring_error_state(struct drm_i915_error_state_buf *m, err_printf(m, " INSTPS: 0x%08x\n", ring->instps); } err_printf(m, " INSTPM: 0x%08x\n", ring->instpm); - err_printf(m, " FADDR: 0x%08x\n", ring->faddr); + err_printf(m, " FADDR: 0x%08x %08x\n", upper_32_bits(ring->faddr), + lower_32_bits(ring->faddr)); if (INTEL_INFO(dev)->gen >= 6) { err_printf(m, " RC PSMI: 0x%08x\n", ring->rc_psmi); err_printf(m, " FAULT_REG: 0x%08x\n", ring->fault_reg); @@ -781,8 +782,10 @@ static void i915_record_ring_state(struct drm_device *dev, ering->instdone = I915_READ(RING_INSTDONE(ring->mmio_base)); ering->instps = I915_READ(RING_INSTPS(ring->mmio_base)); ering->bbaddr = I915_READ(RING_BBADDR(ring->mmio_base)); - if (INTEL_INFO(dev)->gen >= 8) + if (INTEL_INFO(dev)->gen >= 8) { + ering->faddr |= (u64) I915_READ(RING_DMA_FADD_UDW(ring->mmio_base)) << 32; ering->bbaddr |= (u64) I915_READ(RING_BBADDR_UDW(ring->mmio_base)) << 32; + } ering->bbstate = I915_READ(RING_BBSTATE(ring->mmio_base)); } else { ering->faddr = I915_READ(DMA_FADD_I8XX); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 1f927a53fe19..393f93ecd41a 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -835,6 +835,7 @@ enum punit_power_well { #define RING_INSTDONE(base) ((base)+0x6c) #define RING_INSTPS(base) ((base)+0x70) #define RING_DMA_FADD(base) ((base)+0x78) +#define RING_DMA_FADD_UDW(base) ((base)+0x60) /* gen8+ */ #define RING_INSTPM(base) ((base)+0xc0) #define RING_MI_MODE(base) ((base)+0x9c) #define INSTPS 0x02070 /* 965+ only */ -- cgit v1.2.3 From 85b8d5c21564e0388d4ab68adadbfe0cdb8ec728 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 1 Apr 2014 19:39:48 -0300 Subject: drm/i915: Allow i915_pc8_status debug info on BDW Signed-off-by: Zhenyu Wang Reviewed-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 41da286b7c97..8d1845505169 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -2058,7 +2058,7 @@ static int i915_pc8_status(struct seq_file *m, void *unused) struct drm_device *dev = node->minor->dev; struct drm_i915_private *dev_priv = dev->dev_private; - if (!IS_HASWELL(dev)) { + if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) { seq_puts(m, "not supported\n"); return 0; } -- cgit v1.2.3 From 300233ee23d6ab8f05f0b673a278c66e6b19f079 Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Thu, 27 Mar 2014 11:43:38 -0700 Subject: drm/i915: BUG_ON() when cmd/reg tables are not sorted As suggested during review, this makes it much more obvious when the tables are not sorted. Cc: Jani Nikula Signed-off-by: Brad Volkin Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 31 +++++++++++++++++++++---------- 1 file changed, 21 insertions(+), 10 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index d8e5034bdb1d..d25143424576 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -493,12 +493,13 @@ static u32 gen7_blt_get_cmd_length_mask(u32 cmd_header) return 0; } -static void validate_cmds_sorted(struct intel_ring_buffer *ring) +static bool validate_cmds_sorted(struct intel_ring_buffer *ring) { int i; + bool ret = true; if (!ring->cmd_tables || ring->cmd_table_count == 0) - return; + return true; for (i = 0; i < ring->cmd_table_count; i++) { const struct drm_i915_cmd_table *table = &ring->cmd_tables[i]; @@ -510,35 +511,45 @@ static void validate_cmds_sorted(struct intel_ring_buffer *ring) &table->table[i]; u32 curr = desc->cmd.value & desc->cmd.mask; - if (curr < previous) + if (curr < previous) { DRM_ERROR("CMD: table not sorted ring=%d table=%d entry=%d cmd=0x%08X prev=0x%08X\n", ring->id, i, j, curr, previous); + ret = false; + } previous = curr; } } + + return ret; } -static void check_sorted(int ring_id, const u32 *reg_table, int reg_count) +static bool check_sorted(int ring_id, const u32 *reg_table, int reg_count) { int i; u32 previous = 0; + bool ret = true; for (i = 0; i < reg_count; i++) { u32 curr = reg_table[i]; - if (curr < previous) + if (curr < previous) { DRM_ERROR("CMD: table not sorted ring=%d entry=%d reg=0x%08X prev=0x%08X\n", ring_id, i, curr, previous); + ret = false; + } previous = curr; } + + return ret; } -static void validate_regs_sorted(struct intel_ring_buffer *ring) +static bool validate_regs_sorted(struct intel_ring_buffer *ring) { - check_sorted(ring->id, ring->reg_table, ring->reg_count); - check_sorted(ring->id, ring->master_reg_table, ring->master_reg_count); + return check_sorted(ring->id, ring->reg_table, ring->reg_count) && + check_sorted(ring->id, ring->master_reg_table, + ring->master_reg_count); } /** @@ -617,8 +628,8 @@ void i915_cmd_parser_init_ring(struct intel_ring_buffer *ring) BUG(); } - validate_cmds_sorted(ring); - validate_regs_sorted(ring); + BUG_ON(!validate_cmds_sorted(ring)); + BUG_ON(!validate_regs_sorted(ring)); } static const struct drm_i915_cmd_descriptor* -- cgit v1.2.3 From b651000b222701527c730b82ccb0ce42d99a6abe Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Thu, 27 Mar 2014 11:43:39 -0700 Subject: drm/i915: Refactor cmd parser checks into a function This brings the code a little more in line with kernel coding style. Signed-off-by: Brad Volkin Reviewed-by: Jani Nikula Reviewed-by: Kenneth Graunke Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 136 +++++++++++++++++---------------- 1 file changed, 71 insertions(+), 65 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index d25143424576..ef7242e14979 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -758,6 +758,76 @@ bool i915_needs_cmd_parser(struct intel_ring_buffer *ring) return (i915.enable_cmd_parser == 1); } +static bool check_cmd(const struct intel_ring_buffer *ring, + const struct drm_i915_cmd_descriptor *desc, + const u32 *cmd, + const bool is_master) +{ + if (desc->flags & CMD_DESC_REJECT) { + DRM_DEBUG_DRIVER("CMD: Rejected command: 0x%08X\n", *cmd); + return false; + } + + if ((desc->flags & CMD_DESC_MASTER) && !is_master) { + DRM_DEBUG_DRIVER("CMD: Rejected master-only command: 0x%08X\n", + *cmd); + return false; + } + + if (desc->flags & CMD_DESC_REGISTER) { + u32 reg_addr = cmd[desc->reg.offset] & desc->reg.mask; + + if (!valid_reg(ring->reg_table, + ring->reg_count, reg_addr)) { + if (!is_master || + !valid_reg(ring->master_reg_table, + ring->master_reg_count, + reg_addr)) { + DRM_DEBUG_DRIVER("CMD: Rejected register 0x%08X in command: 0x%08X (ring=%d)\n", + reg_addr, + *cmd, + ring->id); + return false; + } + } + } + + if (desc->flags & CMD_DESC_BITMASK) { + int i; + + for (i = 0; i < MAX_CMD_DESC_BITMASKS; i++) { + u32 dword; + + if (desc->bits[i].mask == 0) + break; + + if (desc->bits[i].condition_mask != 0) { + u32 offset = + desc->bits[i].condition_offset; + u32 condition = cmd[offset] & + desc->bits[i].condition_mask; + + if (condition == 0) + continue; + } + + dword = cmd[desc->bits[i].offset] & + desc->bits[i].mask; + + if (dword != desc->bits[i].expected) { + DRM_DEBUG_DRIVER("CMD: Rejected command 0x%08X for bitmask 0x%08X (exp=0x%08X act=0x%08X) (ring=%d)\n", + *cmd, + desc->bits[i].mask, + desc->bits[i].expected, + dword, ring->id); + return false; + } + } + } + + return true; +} + #define LENGTH_BIAS 2 /** @@ -830,75 +900,11 @@ int i915_parse_cmds(struct intel_ring_buffer *ring, break; } - if (desc->flags & CMD_DESC_REJECT) { - DRM_DEBUG_DRIVER("CMD: Rejected command: 0x%08X\n", *cmd); + if (!check_cmd(ring, desc, cmd, is_master)) { ret = -EINVAL; break; } - if ((desc->flags & CMD_DESC_MASTER) && !is_master) { - DRM_DEBUG_DRIVER("CMD: Rejected master-only command: 0x%08X\n", - *cmd); - ret = -EINVAL; - break; - } - - if (desc->flags & CMD_DESC_REGISTER) { - u32 reg_addr = cmd[desc->reg.offset] & desc->reg.mask; - - if (!valid_reg(ring->reg_table, - ring->reg_count, reg_addr)) { - if (!is_master || - !valid_reg(ring->master_reg_table, - ring->master_reg_count, - reg_addr)) { - DRM_DEBUG_DRIVER("CMD: Rejected register 0x%08X in command: 0x%08X (ring=%d)\n", - reg_addr, - *cmd, - ring->id); - ret = -EINVAL; - break; - } - } - } - - if (desc->flags & CMD_DESC_BITMASK) { - int i; - - for (i = 0; i < MAX_CMD_DESC_BITMASKS; i++) { - u32 dword; - - if (desc->bits[i].mask == 0) - break; - - if (desc->bits[i].condition_mask != 0) { - u32 offset = - desc->bits[i].condition_offset; - u32 condition = cmd[offset] & - desc->bits[i].condition_mask; - - if (condition == 0) - continue; - } - - dword = cmd[desc->bits[i].offset] & - desc->bits[i].mask; - - if (dword != desc->bits[i].expected) { - DRM_DEBUG_DRIVER("CMD: Rejected command 0x%08X for bitmask 0x%08X (exp=0x%08X act=0x%08X) (ring=%d)\n", - *cmd, - desc->bits[i].mask, - desc->bits[i].expected, - dword, ring->id); - ret = -EINVAL; - break; - } - } - - if (ret) - break; - } - cmd += length; } -- cgit v1.2.3 From 6e66ea137ff5bd292ed734c53f569892068a7a70 Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Fri, 28 Mar 2014 10:21:50 -0700 Subject: drm/i915: Track OACONTROL register enable/disable during parsing There is some thought that the data from the performance counters enabled via OACONTROL should only be available to the process that enabled counting. To limit snooping, require that any batch buffer which sets OACONTROL to a non-zero value also sets it back to 0 before the end of the batch. This requires limiting OACONTROL writes to happen via MI_LOAD_REGISTER_IMM so that we can access the value being written. This should be in line with the expected use case for writing OACONTROL. v2: Drop an unnecessary '? true : false' Cc: Kenneth Graunke Signed-off-by: Brad Volkin Reviewed-by: Kenneth Graunke Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 35 ++++++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 8 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index ef7242e14979..5b45c191c4e7 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -407,12 +407,7 @@ static const u32 gen7_render_regs[] = { REG64(CL_PRIMITIVES_COUNT), REG64(PS_INVOCATION_COUNT), REG64(PS_DEPTH_COUNT), - /* - * FIXME: This is just to keep mesa working for now, we need to check - * that mesa resets this again and that it doesn't use any of the - * special modes which write into the gtt. - */ - OACONTROL, + OACONTROL, /* Only allowed for LRI and SRM. See below. */ REG64(GEN7_SO_NUM_PRIMS_WRITTEN(0)), REG64(GEN7_SO_NUM_PRIMS_WRITTEN(1)), REG64(GEN7_SO_NUM_PRIMS_WRITTEN(2)), @@ -761,7 +756,8 @@ bool i915_needs_cmd_parser(struct intel_ring_buffer *ring) static bool check_cmd(const struct intel_ring_buffer *ring, const struct drm_i915_cmd_descriptor *desc, const u32 *cmd, - const bool is_master) + const bool is_master, + bool *oacontrol_set) { if (desc->flags & CMD_DESC_REJECT) { DRM_DEBUG_DRIVER("CMD: Rejected command: 0x%08X\n", *cmd); @@ -777,6 +773,23 @@ static bool check_cmd(const struct intel_ring_buffer *ring, if (desc->flags & CMD_DESC_REGISTER) { u32 reg_addr = cmd[desc->reg.offset] & desc->reg.mask; + /* + * OACONTROL requires some special handling for writes. We + * want to make sure that any batch which enables OA also + * disables it before the end of the batch. The goal is to + * prevent one process from snooping on the perf data from + * another process. To do that, we need to check the value + * that will be written to the register. Hence, limit + * OACONTROL writes to only MI_LOAD_REGISTER_IMM commands. + */ + if (reg_addr == OACONTROL) { + if (desc->cmd.value == MI_LOAD_REGISTER_MEM) + return false; + + if (desc->cmd.value == MI_LOAD_REGISTER_IMM(1)) + *oacontrol_set = (cmd[2] != 0); + } + if (!valid_reg(ring->reg_table, ring->reg_count, reg_addr)) { if (!is_master || @@ -851,6 +864,7 @@ int i915_parse_cmds(struct intel_ring_buffer *ring, u32 *cmd, *batch_base, *batch_end; struct drm_i915_cmd_descriptor default_desc = { 0 }; int needs_clflush = 0; + bool oacontrol_set = false; /* OACONTROL tracking. See check_cmd() */ ret = i915_gem_obj_prepare_shmem_read(batch_obj, &needs_clflush); if (ret) { @@ -900,7 +914,7 @@ int i915_parse_cmds(struct intel_ring_buffer *ring, break; } - if (!check_cmd(ring, desc, cmd, is_master)) { + if (!check_cmd(ring, desc, cmd, is_master, &oacontrol_set)) { ret = -EINVAL; break; } @@ -908,6 +922,11 @@ int i915_parse_cmds(struct intel_ring_buffer *ring, cmd += length; } + if (oacontrol_set) { + DRM_DEBUG_DRIVER("CMD: batch set OACONTROL but did not clear it\n"); + ret = -EINVAL; + } + if (cmd >= batch_end) { DRM_DEBUG_DRIVER("CMD: Got to the end of the buffer w/o a BBE cmd!\n"); ret = -EINVAL; -- cgit v1.2.3 From 86a2512124c1734c66bf240fac52a2af08aa1c6f Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Wed, 2 Apr 2014 11:24:20 +0300 Subject: drm/i915: fix command parser debug print format mismatches Drop the cast from the pointer diff to fix: drivers/gpu/drm/i915/i915_cmd_parser.c:405:4: warning: format '%td' expects argument of type 'ptrdiff_t', but argument 5 has type 'long unsigned int' [-Wformat] While at it, use %u for u32. Reported-by: Randy Dunlap Signed-off-by: Jani Nikula [danvet: After conflict resolution only the "While at it, ..." part was left standing ...] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index 5b45c191c4e7..be09e7cd5afb 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -906,7 +906,7 @@ int i915_parse_cmds(struct intel_ring_buffer *ring, length = ((*cmd & desc->length.mask) + LENGTH_BIAS); if ((batch_end - cmd) < length) { - DRM_DEBUG_DRIVER("CMD: Command length exceeds batch length: 0x%08X length=%d batchlen=%td\n", + DRM_DEBUG_DRIVER("CMD: Command length exceeds batch length: 0x%08X length=%u batchlen=%td\n", *cmd, length, batch_end - cmd); -- cgit v1.2.3 From 01fa03021fd9f0ee74efac000242083a67c9667e Mon Sep 17 00:00:00 2001 From: Akash Goel Date: Mon, 24 Mar 2014 23:00:04 +0530 Subject: drm/i915: Enabling the TLB invalidate bit in GFX Mode register MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch Enables the bit for TLB invalidate in GFX Mode register for Gen7. According to bspec, When enabled this bit limits the invalidation of the TLB only to batch buffer boundaries, to pipe_control commands which have the TLB invalidation bit set and sync flushes. If disabled, the TLB caches are flushed for every full flush of the pipeline. Tested only on vlv platform. Chris has tested on ivb and hsw platforms. v2: Adding the explicit enabling of this bit for all Gen7 platforms instead of only vlv (Chris) Signed-off-by: Akash Goel Signed-off-by: Sourab Gupta Tested-by: Chris Wilson #ivb, hsw -Chris Reviewed-by: Ville Syrjälä [danvet: Add w/a markers as suggested by Ville.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_ringbuffer.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 64a0ecf970b9..785f246d28a8 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -587,13 +587,15 @@ static int init_render_ring(struct intel_ring_buffer *ring) I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(ASYNC_FLIP_PERF_DISABLE)); /* Required for the hardware to program scanline values for waiting */ + /* WaEnableFlushTlbInvalidationMode:snb */ if (INTEL_INFO(dev)->gen == 6) I915_WRITE(GFX_MODE, _MASKED_BIT_ENABLE(GFX_TLB_INVALIDATE_EXPLICIT)); + /* WaBCSVCSTlbInvalidationMode:ivb,vlv,hsw */ if (IS_GEN7(dev)) I915_WRITE(GFX_MODE_GEN7, - _MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_EXPLICIT) | + _MASKED_BIT_ENABLE(GFX_TLB_INVALIDATE_EXPLICIT) | _MASKED_BIT_ENABLE(GFX_REPLAY_MODE)); if (INTEL_INFO(dev)->gen >= 5) { -- cgit v1.2.3 From 9926ada1280767a039c4bc0f84549eb8f273c5de Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 19:39:47 -0300 Subject: drm/i915: only check for irqs_disabled when disabling LCPLL Because if we keep the current code, we'll get tons of WARNs on Broadwell, since the code is Haswell-specific. We could have also added a Broadwell-specific code there, but it's not really needed since we never disable LCPLL with the hotplug interrupts still enabled. So keep the easy-and-simple-to-maintain solution until we actually need something else. Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 044d3d78ce82..571589d60c79 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6853,8 +6853,6 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv) struct drm_device *dev = dev_priv->dev; struct intel_ddi_plls *plls = &dev_priv->ddi_plls; struct intel_crtc *crtc; - unsigned long irqflags; - uint32_t val; list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) WARN(crtc->active, "CRTC for pipe %c enabled\n", @@ -6875,14 +6873,13 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv) "Utility pin enabled\n"); WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n"); - spin_lock_irqsave(&dev_priv->irq_lock, irqflags); - val = I915_READ(DEIMR); - WARN((val | DE_PCH_EVENT_IVB) != 0xffffffff, - "Unexpected DEIMR bits enabled: 0x%x\n", val); - val = I915_READ(SDEIMR); - WARN((val | SDE_HOTPLUG_MASK_CPT) != 0xffffffff, - "Unexpected SDEIMR bits enabled: 0x%x\n", val); - spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); + /* + * In theory we can still leave IRQs enabled, as long as only the HPD + * interrupts remain enabled. We used to check for that, but since it's + * gen-specific and since we only disable LCPLL after we fully disable + * the interrupts, the check below should be enough. + */ + WARN(!dev_priv->pm.irqs_disabled, "IRQs enabled\n"); } static void hsw_write_dcomp(struct drm_i915_private *dev_priv, uint32_t val) -- cgit v1.2.3 From 4b28a1f3ef55a3b0b68dbab1fe6dbaf18e186710 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 1 Apr 2014 19:39:49 -0300 Subject: drm/i915: fix infinite loop at gen6_update_ring_freq If I boot my Broadwell machine to X on a system with Mesa Gallium llvmpipe instead of i965, then kill X and try to run pm_pc8.c, when we disable PC8 and call gen6_update_ring_freq(), we will get stuck on an infinite loop because the frequencies are zero and the variables are unsigned. This happens because we never ran any batch, so we did not enable RC6, so the variables are zero. If I run gem_exec_nop before running pm_pc8, everything works as expected because gem_exec_nop makes RC6 be enabled. This commit should prevent the infinite loop, which IMHO is already a good reason to be merged, but it is not the proper fix to the "RC6 is not being enabled" problem. Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index cebe0d42a787..0a0685bbd5dc 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3487,7 +3487,8 @@ void gen6_update_ring_freq(struct drm_device *dev) * to use for memory access. We do this by specifying the IA frequency * the PCU should use as a reference to determine the ring frequency. */ - for (gpu_freq = dev_priv->rps.max_freq_softlimit; gpu_freq >= dev_priv->rps.min_freq_softlimit; + for (gpu_freq = dev_priv->rps.max_freq_softlimit; + gpu_freq >= dev_priv->rps.min_freq_softlimit && gpu_freq != 0; gpu_freq--) { int diff = dev_priv->rps.max_freq_softlimit - gpu_freq; unsigned int ia_freq = 0, ring_freq = 0; -- cgit v1.2.3 From 7a10dfa638be26669f0987b6a21a65e6b39356b2 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 1 Apr 2014 09:33:47 +0200 Subject: drm/i915: Add debug module option for VTd validation VTd has a few too many "outright disable the damn thing" workarounds accumulated and for validation we want a simple knob to make sure we disable them all. Since this is for bdw+ validation and atm we don't have any workarounds for bdw this option currently does nothing. So currently this is just a placeholder to make sure reality will match with the documented process for our validation people. v2: Fix up param description (Jani). v3: Actually git add ... Cc: Jani Nikula Cc: David Woodhouse Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_params.c | 4 ++++ 2 files changed, 5 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 0c10b7bd0727..55addaaa8222 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1923,6 +1923,7 @@ struct i915_params { bool prefault_disable; bool reset; bool disable_display; + bool disable_vtd_wa; }; extern struct i915_params i915 __read_mostly; diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c index e1027cc5f0ee..d05a2afa17dc 100644 --- a/drivers/gpu/drm/i915/i915_params.c +++ b/drivers/gpu/drm/i915/i915_params.c @@ -47,6 +47,7 @@ struct i915_params i915 __read_mostly = { .invert_brightness = 0, .disable_display = 0, .enable_cmd_parser = 1, + .disable_vtd_wa = 0, }; module_param_named(modeset, i915.modeset, int, 0400); @@ -149,6 +150,9 @@ MODULE_PARM_DESC(invert_brightness, module_param_named(disable_display, i915.disable_display, bool, 0600); MODULE_PARM_DESC(disable_display, "Disable display (default: false)"); +module_param_named(disable_vtd_wa, i915.disable_vtd_wa, bool, 0600); +MODULE_PARM_DESC(disable_vtd_wa, "Disable all VT-d workarounds (default: false)"); + module_param_named(enable_cmd_parser, i915.enable_cmd_parser, int, 0600); MODULE_PARM_DESC(enable_cmd_parser, "Enable command parsing (1=enabled [default], 0=disabled)"); -- cgit v1.2.3 From 5db6c735ead5e6d22caf95ad52f801d23c4d0199 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 31 Mar 2014 16:23:04 +0200 Subject: drm/i915: dmesg output for VT-d testing Our validation guys want to have a positive proof that the gfx driver is indeed using VT-d, since setting up a gfx stack, especially in early bring-up and by people not versed in linux gfx is a bit tricky. So provide just that. Cc: David Woodhouse Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_gtt.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index b31cde1d5979..cb6401fe9637 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -1961,6 +1961,10 @@ int i915_gem_gtt_init(struct drm_device *dev) gtt->base.total >> 20); DRM_DEBUG_DRIVER("GMADR size = %ldM\n", gtt->mappable_end >> 20); DRM_DEBUG_DRIVER("GTT stolen size = %zdM\n", gtt->stolen_size >> 20); +#ifdef CONFIG_INTEL_IOMMU + if (intel_iommu_gfx_mapped) + DRM_INFO("VT-d active for gfx access\n"); +#endif return 0; } -- cgit v1.2.3 From a2a5b15c51df699ddc2158842b1c70f83871af54 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 31 Mar 2014 18:17:16 +0300 Subject: drm/i915: Fix debugfs PDP register dump MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Iterate over all the PDP registers instead of just printing PDP0 four times in gen8 PPGTT debugfs info. Signed-off-by: Ville Syrjälä Reviewed-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_debugfs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 8d1845505169..a76faef95981 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1830,8 +1830,7 @@ static void gen8_ppgtt_info(struct seq_file *m, struct drm_device *dev) u64 pdp = I915_READ(ring->mmio_base + offset + 4); pdp <<= 32; pdp |= I915_READ(ring->mmio_base + offset); - for (i = 0; i < 4; i++) - seq_printf(m, "\tPDP%d 0x%016llx\n", i, pdp); + seq_printf(m, "\tPDP%d 0x%016llx\n", i, pdp); } } } -- cgit v1.2.3 From 2070f00c79f627eb0ca47a537e5635424b5550ca Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 31 Mar 2014 18:21:25 +0300 Subject: drm/i915: Move DP M/N setup from update_pll to mode_set for gmch platforms MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There's no point in hiding the DP M/N setup in the update_pll functions. Just move it to the mode_set function. Signed-off-by: Ville Syrjälä Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 571589d60c79..f0c8446d381d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5218,9 +5218,6 @@ static void vlv_update_pll(struct intel_crtc *crtc) << DPLL_MD_UDI_MULTIPLIER_SHIFT; crtc->config.dpll_hw_state.dpll_md = dpll_md; - if (crtc->config.has_dp_encoder) - intel_dp_set_m_n(crtc); - mutex_unlock(&dev_priv->dpio_lock); } @@ -5298,9 +5295,6 @@ static void i9xx_update_pll(struct intel_crtc *crtc, << DPLL_MD_UDI_MULTIPLIER_SHIFT; crtc->config.dpll_hw_state.dpll_md = dpll_md; } - - if (crtc->config.has_dp_encoder) - intel_dp_set_m_n(crtc); } static void i8xx_update_pll(struct intel_crtc *crtc, @@ -5629,6 +5623,9 @@ skip_dpll: dspcntr |= DISPPLANE_SEL_PIPE_B; } + if (intel_crtc->config.has_dp_encoder) + intel_dp_set_m_n(intel_crtc); + intel_set_pipe_timings(intel_crtc); /* pipesrc and dspsize control the size that is scaled from, -- cgit v1.2.3 From 0d95e11b7e27536dbb52c42a8bb5a6f31d7c24cf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 31 Mar 2014 18:21:27 +0300 Subject: drm/i915: Warn when DPIO read returns 0xffffffff MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DPIO reads from groups/broadcast register offsets for PCS and TX return all 1's. If that result gets used for something we'll probably end up doing something wrong. So warn when that happens. FIXME there might be some registers where all 1's is a valid value, so ideally we should check the register offset instead... Signed-off-by: Ville Syrjälä Reviewed-by: Jesse Barnes [danvet: copypaste the FIXME comment into the code.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sideband.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_sideband.c b/drivers/gpu/drm/i915/intel_sideband.c index 0954f132726e..b1a5514e695a 100644 --- a/drivers/gpu/drm/i915/intel_sideband.c +++ b/drivers/gpu/drm/i915/intel_sideband.c @@ -182,6 +182,14 @@ u32 vlv_dpio_read(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) vlv_sideband_rw(dev_priv, DPIO_DEVFN, DPIO_PHY_IOSF_PORT(DPIO_PHY(pipe)), DPIO_OPCODE_REG_READ, reg, &val); + + /* + * FIXME: There might be some registers where all 1's is a valid value, + * so ideally we should check the register offset instead... + */ + WARN(val == 0xffffffff, "DPIO read pipe %c reg 0x%x == 0x%x\n", + pipe_name(pipe), reg, val); + return val; } -- cgit v1.2.3 From eb6008ad30fe51b5be36d2ccce2c9c0409ac88a4 Mon Sep 17 00:00:00 2001 From: Rafael Barbalho Date: Mon, 31 Mar 2014 18:21:29 +0300 Subject: drm/i915: Fix framecount offset The framecount register was still using the old PIPE macro instead of the new PIPE2 macro Signed-off-by: Rafael Barbalho Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 393f93ecd41a..b50c92a63d04 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3622,9 +3622,9 @@ enum punit_power_well { #define PIPE_PIXEL_MASK 0x00ffffff #define PIPE_PIXEL_SHIFT 0 /* GM45+ just has to be different */ -#define _PIPEA_FRMCOUNT_GM45 (dev_priv->info.display_mmio_offset + 0x70040) -#define _PIPEA_FLIPCOUNT_GM45 (dev_priv->info.display_mmio_offset + 0x70044) -#define PIPE_FRMCOUNT_GM45(pipe) _PIPE(pipe, _PIPEA_FRMCOUNT_GM45, _PIPEB_FRMCOUNT_GM45) +#define _PIPEA_FRMCOUNT_GM45 0x70040 +#define _PIPEA_FLIPCOUNT_GM45 0x70044 +#define PIPE_FRMCOUNT_GM45(pipe) _PIPE2(pipe, _PIPEA_FRMCOUNT_GM45) /* Cursor A & B regs */ #define _CURACNTR (dev_priv->info.display_mmio_offset + 0x70080) -- cgit v1.2.3 From 057f6a8ad7691d028681ba443d7f5e482a6a80a4 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Wed, 2 Apr 2014 22:30:23 -0700 Subject: drm/i915: Invariably invalidate before ctx switch We have been setting the bit which was originally BIOS dependent since: commit f05bb0c7b624252a5e768287e340e8e45df96e42 Author: Chris Wilson Date: Sun Jan 20 16:33:32 2013 +0000 drm/i915: GFX_MODE Flush TLB Invalidate Mode must be '1' for scanline waits Therefore, we do not need to try to figure it out dynamically and we can just always invalidate the TLBs. It's a partial revert of: commit 12b0286f49947a6cdc9285032d918466a8c3f5f9 Author: Ben Widawsky Date: Mon Jun 4 14:42:50 2012 -0700 drm/i915: possibly invalidate TLB before context switch The original commit attempted to only invalidate when necessary (very much a relic from the old days). Now, we can just always invalidate. I guess the old TODO still exists. Since we seem to have abandoned ILK contexts however, there isn't much point in even remembering. Cc: Chris Wilson Signed-off-by: Ben Widawsky Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_context.c | 2 +- drivers/gpu/drm/i915/intel_ringbuffer.c | 7 ------- drivers/gpu/drm/i915/intel_ringbuffer.h | 4 ---- 3 files changed, 1 insertion(+), 12 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c index edbad2787d65..8827892a099d 100644 --- a/drivers/gpu/drm/i915/i915_gem_context.c +++ b/drivers/gpu/drm/i915/i915_gem_context.c @@ -596,7 +596,7 @@ mi_set_context(struct intel_ring_buffer *ring, * explicitly, so we rely on the value at ring init, stored in * itlb_before_ctx_switch. */ - if (IS_GEN6(ring->dev) && ring->itlb_before_ctx_switch) { + if (IS_GEN6(ring->dev)) { ret = ring->flush(ring, I915_GEM_GPU_DOMAINS, 0); if (ret) return ret; diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 785f246d28a8..fb3eeb0705c9 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -612,13 +612,6 @@ static int init_render_ring(struct intel_ring_buffer *ring) */ I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(CM0_STC_EVICT_DISABLE_LRA_SNB)); - - /* This is not explicitly set for GEN6, so read the register. - * see intel_ring_mi_set_context() for why we care. - * TODO: consider explicitly setting the bit for GEN5 - */ - ring->itlb_before_ctx_switch = - !!(I915_READ(GFX_MODE) & GFX_TLB_INVALIDATE_EXPLICIT); } if (INTEL_INFO(dev)->gen >= 6) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index 270a6a973438..9e913633eb6c 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -152,10 +152,6 @@ struct intel_ring_buffer { wait_queue_head_t irq_queue; - /** - * Do an explicit TLB flush before MI_SET_CONTEXT - */ - bool itlb_before_ctx_switch; struct i915_hw_context *default_context; struct i915_hw_context *last_context; -- cgit v1.2.3 From 9991ae787a0c87fe7c783b4b6f4754c3cdbb6213 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 2 Apr 2014 16:36:07 +0100 Subject: drm/i915: Move all ring resets before setting the HWS page In commit a51435a3137ad8ae75c288c39bd2d8b2696bae8f Author: Naresh Kumar Kachhi Date: Wed Mar 12 16:39:40 2014 +0530 drm/i915: disable rings before HW status page setup we reordered stopping the rings to do so before we set the HWS register. However, there is an extra workaround for g45 to reset the rings twice, and for consistency we should apply that workaround before setting the HWS to be sure that the rings are truly stopped. Cc: Naresh Kumar Kachhi Signed-off-by: Chris Wilson Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_ringbuffer.c | 54 +++++++++++++++++++++------------ drivers/gpu/drm/i915/intel_ringbuffer.h | 1 + 3 files changed, 36 insertions(+), 20 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b50c92a63d04..23153668dacc 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -915,6 +915,7 @@ enum punit_power_well { # define MI_FLUSH_ENABLE (1 << 12) # define ASYNC_FLIP_PERF_DISABLE (1 << 14) # define MODE_IDLE (1 << 9) +# define STOP_RING (1 << 8) #define GEN6_GT_MODE 0x20d0 #define GEN7_GT_MODE 0x7008 diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index fb3eeb0705c9..3d76ce135a05 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -437,32 +437,41 @@ static void ring_setup_phys_status_page(struct intel_ring_buffer *ring) I915_WRITE(HWS_PGA, addr); } -static int init_ring_common(struct intel_ring_buffer *ring) +static bool stop_ring(struct intel_ring_buffer *ring) { - struct drm_device *dev = ring->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_i915_gem_object *obj = ring->obj; - int ret = 0; - u32 head; + struct drm_i915_private *dev_priv = to_i915(ring->dev); - gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL); + if (!IS_GEN2(ring->dev)) { + I915_WRITE_MODE(ring, _MASKED_BIT_ENABLE(STOP_RING)); + if (wait_for_atomic((I915_READ_MODE(ring) & MODE_IDLE) != 0, 1000)) { + DRM_ERROR("%s :timed out trying to stop ring\n", ring->name); + return false; + } + } - /* Stop the ring if it's running. */ I915_WRITE_CTL(ring, 0); I915_WRITE_HEAD(ring, 0); ring->write_tail(ring, 0); - if (wait_for_atomic((I915_READ_MODE(ring) & MODE_IDLE) != 0, 1000)) - DRM_ERROR("%s :timed out trying to stop ring\n", ring->name); - if (I915_NEED_GFX_HWS(dev)) - intel_ring_setup_status_page(ring); - else - ring_setup_phys_status_page(ring); + if (!IS_GEN2(ring->dev)) { + (void)I915_READ_CTL(ring); + I915_WRITE_MODE(ring, _MASKED_BIT_DISABLE(STOP_RING)); + } - head = I915_READ_HEAD(ring) & HEAD_ADDR; + return (I915_READ_HEAD(ring) & HEAD_ADDR) == 0; +} - /* G45 ring initialization fails to reset head to zero */ - if (head != 0) { +static int init_ring_common(struct intel_ring_buffer *ring) +{ + struct drm_device *dev = ring->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj = ring->obj; + int ret = 0; + + gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL); + + if (!stop_ring(ring)) { + /* G45 ring initialization often fails to reset head to zero */ DRM_DEBUG_KMS("%s head not reset to zero " "ctl %08x head %08x tail %08x start %08x\n", ring->name, @@ -471,9 +480,7 @@ static int init_ring_common(struct intel_ring_buffer *ring) I915_READ_TAIL(ring), I915_READ_START(ring)); - I915_WRITE_HEAD(ring, 0); - - if (I915_READ_HEAD(ring) & HEAD_ADDR) { + if (!stop_ring(ring)) { DRM_ERROR("failed to set %s head to zero " "ctl %08x head %08x tail %08x start %08x\n", ring->name, @@ -481,9 +488,16 @@ static int init_ring_common(struct intel_ring_buffer *ring) I915_READ_HEAD(ring), I915_READ_TAIL(ring), I915_READ_START(ring)); + ret = -EIO; + goto out; } } + if (I915_NEED_GFX_HWS(dev)) + intel_ring_setup_status_page(ring); + else + ring_setup_phys_status_page(ring); + /* Initialize the ring. This must happen _after_ we've cleared the ring * registers with the above sequence (the readback of the HEAD registers * also enforces ordering), otherwise the hw might lose the new ring diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index 9e913633eb6c..413cdc74ed53 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -34,6 +34,7 @@ struct intel_hw_status_page { #define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val) #define I915_READ_MODE(ring) I915_READ(RING_MI_MODE((ring)->mmio_base)) +#define I915_WRITE_MODE(ring, val) I915_WRITE(RING_MI_MODE((ring)->mmio_base), val) enum intel_ring_hangcheck_action { HANGCHECK_IDLE = 0, -- cgit v1.2.3 From 04feced98a434c7046108671dc5b6f50f3b63ed7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 3 Apr 2014 13:28:33 +0300 Subject: drm/i915: Provide a bit more info when pipestat bits are wrong MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Print the enable_mask and status_mask from __i915_{enable,disable}_pipestat() when the caller has messed them up somehow. v2: Use pipe_name() (Damien) Fix a typo in the commit message Reviewed-by: Jesse Barnes Signed-off-by: Ville Syrjälä Reviewed-by: Damien Lespiau Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 327d584e4353..bdda3b556165 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -531,8 +531,10 @@ __i915_enable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe, assert_spin_locked(&dev_priv->irq_lock); - if (WARN_ON_ONCE(enable_mask & ~PIPESTAT_INT_ENABLE_MASK || - status_mask & ~PIPESTAT_INT_STATUS_MASK)) + if (WARN_ONCE(enable_mask & ~PIPESTAT_INT_ENABLE_MASK || + status_mask & ~PIPESTAT_INT_STATUS_MASK, + "pipe %c: enable_mask=0x%x, status_mask=0x%x\n", + pipe_name(pipe), enable_mask, status_mask)) return; if ((pipestat & enable_mask) == enable_mask) @@ -555,8 +557,10 @@ __i915_disable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe, assert_spin_locked(&dev_priv->irq_lock); - if (WARN_ON_ONCE(enable_mask & ~PIPESTAT_INT_ENABLE_MASK || - status_mask & ~PIPESTAT_INT_STATUS_MASK)) + if (WARN_ONCE(enable_mask & ~PIPESTAT_INT_ENABLE_MASK || + status_mask & ~PIPESTAT_INT_STATUS_MASK, + "pipe %c: enable_mask=0x%x, status_mask=0x%x\n", + pipe_name(pipe), enable_mask, status_mask)) return; if ((pipestat & enable_mask) == 0) -- cgit v1.2.3 From 4e04632e882719e46edcbbc0b76fad778a0ed845 Mon Sep 17 00:00:00 2001 From: Akash Goel Date: Fri, 4 Apr 2014 17:14:38 +0530 Subject: drm/i915/vlv:Implement the WA 'WaDisable_RenderCache_OperationalFlush' MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On Gen4+ platforms (except BDW), Render Cache Operational flush cannot be enabled. This WA is apparently required for all Gen4+ platforms,except BDW. In BDW, the bit has been repurposed otherwise. This has been tested only on vlv. v2: Corrected the code regarding the wrong usage of MASKED_BIT_DISABLE (Chris) v3: Enhancing the scope of WA to Gen4+ platforms except BDW (Ville) v4: Adding WA for g4x, crestline, broadwater (Ville) Signed-off-by: Akash Goel Signed-off-by: Sourab Gupta Reviewed-by: Ville Syrjälä Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_pm.c | 24 ++++++++++++++++++++++++ 2 files changed, 25 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 23153668dacc..8e60737c9c57 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1061,6 +1061,7 @@ enum punit_power_well { #define ECO_FLIP_DONE (1<<0) #define CACHE_MODE_0_GEN7 0x7000 /* IVB+ */ +#define RC_OP_FLUSH_ENABLE (1<<0) #define HIZ_RAW_STALL_OPT_DISABLE (1<<2) #define CACHE_MODE_1 0x7004 /* IVB+ */ #define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 04af065a932f..502897367c8c 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4625,6 +4625,9 @@ static void ironlake_init_clock_gating(struct drm_device *dev) I915_WRITE(CACHE_MODE_0, _MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE)); + /* WaDisable_RenderCache_OperationalFlush:ilk */ + I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); + g4x_disable_trickle_feed(dev); ibx_init_clock_gating(dev); @@ -4700,6 +4703,9 @@ static void gen6_init_clock_gating(struct drm_device *dev) I915_WRITE(GEN6_GT_MODE, _MASKED_BIT_ENABLE(GEN6_TD_FOUR_ROW_DISPATCH_DISABLE)); + /* WaDisable_RenderCache_OperationalFlush:snb */ + I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); + /* * BSpec recoomends 8x4 when MSAA is used, * however in practice 16x4 seems fastest. @@ -4939,6 +4945,9 @@ static void haswell_init_clock_gating(struct drm_device *dev) I915_WRITE(GEN7_FF_THREAD_MODE, I915_READ(GEN7_FF_THREAD_MODE) & ~GEN7_FF_VS_REF_CNT_FFME); + /* WaDisable_RenderCache_OperationalFlush:hsw */ + I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); + /* enable HiZ Raw Stall Optimization */ I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(HIZ_RAW_STALL_OPT_DISABLE)); @@ -4991,6 +5000,9 @@ static void ivybridge_init_clock_gating(struct drm_device *dev) I915_WRITE(GEN7_HALF_SLICE_CHICKEN1, _MASKED_BIT_ENABLE(GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE)); + /* WaDisable_RenderCache_OperationalFlush:ivb */ + I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); + /* Apply the WaDisableRHWOOptimizationForRenderHang:ivb workaround. */ I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1, GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC); @@ -5106,6 +5118,9 @@ static void valleyview_init_clock_gating(struct drm_device *dev) _MASKED_BIT_ENABLE(GEN7_MAX_PS_THREAD_DEP | GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE)); + /* WaDisable_RenderCache_OperationalFlush:vlv */ + I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); + /* WaForceL3Serialization:vlv */ I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) & ~L3SQ_URB_READ_CAM_MATCH_DISABLE); @@ -5175,6 +5190,9 @@ static void g4x_init_clock_gating(struct drm_device *dev) I915_WRITE(CACHE_MODE_0, _MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE)); + /* WaDisable_RenderCache_OperationalFlush:g4x */ + I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); + g4x_disable_trickle_feed(dev); } @@ -5189,6 +5207,9 @@ static void crestline_init_clock_gating(struct drm_device *dev) I915_WRITE16(DEUC, 0); I915_WRITE(MI_ARB_STATE, _MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE)); + + /* WaDisable_RenderCache_OperationalFlush:gen4 */ + I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); } static void broadwater_init_clock_gating(struct drm_device *dev) @@ -5203,6 +5224,9 @@ static void broadwater_init_clock_gating(struct drm_device *dev) I915_WRITE(RENCLK_GATE_D2, 0); I915_WRITE(MI_ARB_STATE, _MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE)); + + /* WaDisable_RenderCache_OperationalFlush:gen4 */ + I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE)); } static void gen3_init_clock_gating(struct drm_device *dev) -- cgit v1.2.3 From ad2ac08bf34b54c99026ebe50ea275b08b5b8ca2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 4 Apr 2014 16:36:10 +0300 Subject: drm/i915: Make contexts non-snooped on non-LLC platforms MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We don't do CPU access to GPU contexts so making the GPU access snoop the CPU caches seems silly, and potentially expensive. v2: Use !IS_VALLEYVIEW instead of HAS_LLC as this is really about what the PTEs can represent. Add a comment clarifying the situation. Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_context.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c index 8827892a099d..30b355afb362 100644 --- a/drivers/gpu/drm/i915/i915_gem_context.c +++ b/drivers/gpu/drm/i915/i915_gem_context.c @@ -240,7 +240,15 @@ __create_hw_context(struct drm_device *dev, return ERR_PTR(-ENOMEM); } - if (INTEL_INFO(dev)->gen >= 7) { + /* + * Try to make the context utilize L3 as well as LLC. + * + * On VLV we don't have L3 controls in the PTEs so we + * shouldn't touch the cache level, especially as that + * would make the object snooped which might have a + * negative performance impact. + */ + if (INTEL_INFO(dev)->gen >= 7 && !IS_VALLEYVIEW(dev)) { ret = i915_gem_object_set_cache_level(ctx->obj, I915_CACHE_L3_LLC); /* Failure shouldn't ever happen this early */ -- cgit v1.2.3 From cfa7698bd41bd1139b7730c396a89b731513ded7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 7 Mar 2014 18:32:08 +0200 Subject: drm/i915: Don't read sprite LP2+ registers on ILK/SNB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sprite LP2+ registers don't exist on ILK/SNB so don't read them. Signed-off-by: Ville Syrjälä Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 502897367c8c..2091a9ce1375 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2664,8 +2664,10 @@ void ilk_wm_get_hw_state(struct drm_device *dev) hw->wm_lp[2] = I915_READ(WM3_LP_ILK); hw->wm_lp_spr[0] = I915_READ(WM1S_LP_ILK); - hw->wm_lp_spr[1] = I915_READ(WM2S_LP_IVB); - hw->wm_lp_spr[2] = I915_READ(WM3S_LP_IVB); + if (INTEL_INFO(dev)->gen >= 7) { + hw->wm_lp_spr[1] = I915_READ(WM2S_LP_IVB); + hw->wm_lp_spr[2] = I915_READ(WM3S_LP_IVB); + } if (IS_HASWELL(dev) || IS_BROADWELL(dev)) hw->partitioning = (I915_READ(WM_MISC) & WM_MISC_DATA_PARTITION_5_6) ? -- cgit v1.2.3 From 935f38d6948eb0bf10ac691d010fec9e9163a9c6 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Fri, 4 Apr 2014 22:41:07 -0700 Subject: drm/i915: Unref context on failed eb_create I opted to do this instead of grabbing the context reference after eb_create since eb_create can potentially call the shrinker, and that makes things very complicated. This simple patch balances the ref count without requiring a great deal of review to make sure the shrinker path is safe. Theoretically (by design) the shrinker can end up destroying a context, which enforces the reasoning for doing the fix this way instead of moving the reference to later in the function. Cc: Chris Wilson Signed-off-by: Ben Widawsky Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 7447160155a3..34914025e750 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -1132,7 +1132,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, mutex_unlock(&dev->struct_mutex); ret = PTR_ERR(ctx); goto pre_mutex_err; - } + } i915_gem_context_reference(ctx); @@ -1142,6 +1142,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, eb = eb_create(args); if (eb == NULL) { + i915_gem_context_unreference(ctx); mutex_unlock(&dev->struct_mutex); ret = -ENOMEM; goto pre_mutex_err; -- cgit v1.2.3 From 9393707190194eb8b42e412b444a03331db6862f Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 4 Apr 2014 16:12:09 -0700 Subject: drm/i915: warn when a vblank wait times out This always indicates a bug somewhere. Signed-off-by: Jesse Barnes Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 373ffdb97ae3..b2ec242add84 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -765,7 +765,7 @@ static void g4x_wait_for_vblank(struct drm_device *dev, int pipe) frame = I915_READ(frame_reg); if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50)) - DRM_DEBUG_KMS("vblank wait timed out\n"); + WARN(1, "vblank wait timed out\n"); } /** -- cgit v1.2.3 From 17d36749a559905f7d9a640239a9fc74fc3bb445 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Sat, 5 Apr 2014 14:55:53 -0700 Subject: drm/i915: Dump the whole context object. As we've learned over time, the HW context is just a series of GPU commands that we're able to decode without any changes in intel_error_decode. Since many bugs recently have been implicated in the HW context state, it makes sense to dump the whole context object in a form which can be parsed. Sample: render ring --- HW Context = 0x042db000 ringbuffer (render ring) at 0x0160c000; HEAD points to: 0x0160c000 0x0160c000: 0x00000000: MI_NOOP 0x0160c004: 0x00000000: MI_NOOP 0x0160c008: 0x00000000: MI_NOOP 0x0160c00c: 0x00000000: MI_NOOP 0x0160c010: 0x00000000: MI_NOOP 0x0160c014: 0x00000000: MI_NOOP 0x0160c018: 0x00000000: MI_NOOP 0x0160c01c: 0x00000000: MI_NOOP Unfortunately, our decoder isn't quite smart enough to deal with the variable length LRIs - but that is a tools problem. Signed-off-by: Ben Widawsky [danvet: Clarify commit message a bit, seems to have lost a few crucial words.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gpu_error.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_gpu_error.c b/drivers/gpu/drm/i915/i915_gpu_error.c index 1005af020a8e..4865ade71f29 100644 --- a/drivers/gpu/drm/i915/i915_gpu_error.c +++ b/drivers/gpu/drm/i915/i915_gpu_error.c @@ -453,16 +453,7 @@ int i915_error_state_to_str(struct drm_i915_error_state_buf *m, err_printf(m, "%s --- HW Context = 0x%08x\n", dev_priv->ring[i].name, obj->gtt_offset); - offset = 0; - for (elt = 0; elt < PAGE_SIZE/16; elt += 4) { - err_printf(m, "[%04x] %08x %08x %08x %08x\n", - offset, - obj->pages[0][elt], - obj->pages[0][elt+1], - obj->pages[0][elt+2], - obj->pages[0][elt+3]); - offset += 16; - } + print_error_obj(m, obj); } } @@ -878,10 +869,7 @@ static void i915_gem_record_active_context(struct intel_ring_buffer *ring, list_for_each_entry(obj, &dev_priv->mm.bound_list, global_list) { if ((error->ccid & PAGE_MASK) == i915_gem_obj_ggtt_offset(obj)) { - ering->ctx = i915_error_object_create_sized(dev_priv, - obj, - &dev_priv->gtt.base, - 1); + ering->ctx = i915_error_ggtt_object_create(dev_priv, obj); break; } } -- cgit v1.2.3 From 2a44b76bb5a1f520371432825c91fa46c63bde84 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 7 Mar 2014 18:32:09 +0200 Subject: drm/i915: Add some more tracked state to intel_pipe_wm MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit intel_pipe_wm will be used to track the state in different stages of the watermark update process. For that we need to keep a bit more state in intel_pipe_wm. We also need to separate the multi-pipe intel_wm_config computation from ilk_compute_wm_parameters() as that one deals with the future state, and we need the intel_wm_config to match the current hardware state at the time we do the watermark merging for multiple pipes. Signed-off-by: Ville Syrjälä Reviewed-by: Paulo Zanoni [danvet: Frob conflict.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_drv.h | 3 ++ drivers/gpu/drm/i915/intel_pm.c | 64 +++++++++++++++++++++++++++------------- 2 files changed, 46 insertions(+), 21 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 42762b798cb0..6b512607b2f5 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -342,6 +342,9 @@ struct intel_pipe_wm { struct intel_wm_level wm[5]; uint32_t linetime; bool fbc_wm_enabled; + bool pipe_enabled; + bool sprites_enabled; + bool sprites_scaled; }; struct intel_crtc { diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 2091a9ce1375..855c01b2b0c1 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2105,38 +2105,52 @@ static void ilk_setup_wm_latency(struct drm_device *dev) } static void ilk_compute_wm_parameters(struct drm_crtc *crtc, - struct ilk_pipe_wm_parameters *p, - struct intel_wm_config *config) + struct ilk_pipe_wm_parameters *p) { struct drm_device *dev = crtc->dev; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); enum pipe pipe = intel_crtc->pipe; struct drm_plane *plane; - p->active = intel_crtc_active(crtc); - if (p->active) { - p->pipe_htotal = intel_crtc->config.adjusted_mode.crtc_htotal; - p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc); - p->pri.bytes_per_pixel = crtc->primary->fb->bits_per_pixel / 8; - p->cur.bytes_per_pixel = 4; - p->pri.horiz_pixels = intel_crtc->config.pipe_src_w; - p->cur.horiz_pixels = intel_crtc->cursor_width; - /* TODO: for now, assume primary and cursor planes are always enabled. */ - p->pri.enabled = true; - p->cur.enabled = true; - } + if (!intel_crtc_active(crtc)) + return; - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) - config->num_pipes_active += intel_crtc_active(crtc); + p->active = true; + p->pipe_htotal = intel_crtc->config.adjusted_mode.crtc_htotal; + p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc); + p->pri.bytes_per_pixel = crtc->primary->fb->bits_per_pixel / 8; + p->cur.bytes_per_pixel = 4; + p->pri.horiz_pixels = intel_crtc->config.pipe_src_w; + p->cur.horiz_pixels = intel_crtc->cursor_width; + /* TODO: for now, assume primary and cursor planes are always enabled. */ + p->pri.enabled = true; + p->cur.enabled = true; drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) { struct intel_plane *intel_plane = to_intel_plane(plane); - if (intel_plane->pipe == pipe) + if (intel_plane->pipe == pipe) { p->spr = intel_plane->wm; + break; + } + } +} - config->sprites_enabled |= intel_plane->wm.enabled; - config->sprites_scaled |= intel_plane->wm.scaled; +static void ilk_compute_wm_config(struct drm_device *dev, + struct intel_wm_config *config) +{ + struct intel_crtc *intel_crtc; + + /* Compute the currently _active_ config */ + list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, base.head) { + const struct intel_pipe_wm *wm = &intel_crtc->wm.active; + + if (!wm->pipe_enabled) + continue; + + config->sprites_enabled |= wm->sprites_enabled; + config->sprites_scaled |= wm->sprites_scaled; + config->num_pipes_active++; } } @@ -2159,6 +2173,10 @@ static bool intel_compute_pipe_wm(struct drm_crtc *crtc, /* LP0 watermarks always use 1/2 DDB partitioning */ ilk_compute_wm_maximums(dev, 0, &config, INTEL_DDB_PART_1_2, &max); + pipe_wm->pipe_enabled = params->active; + pipe_wm->sprites_enabled = params->spr.enabled; + pipe_wm->sprites_scaled = params->spr.scaled; + /* ILK/SNB: LP2+ watermarks only w/o sprites */ if (INTEL_INFO(dev)->gen <= 6 && params->spr.enabled) max_level = 1; @@ -2548,7 +2566,7 @@ static void ilk_update_wm(struct drm_crtc *crtc) struct intel_pipe_wm lp_wm_1_2 = {}, lp_wm_5_6 = {}, *best_lp_wm; struct intel_wm_config config = {}; - ilk_compute_wm_parameters(crtc, ¶ms, &config); + ilk_compute_wm_parameters(crtc, ¶ms); intel_compute_pipe_wm(crtc, ¶ms, &pipe_wm); @@ -2557,6 +2575,8 @@ static void ilk_update_wm(struct drm_crtc *crtc) intel_crtc->wm.active = pipe_wm; + ilk_compute_wm_config(dev, &config); + ilk_compute_wm_maximums(dev, 1, &config, INTEL_DDB_PART_1_2, &max); ilk_wm_merge(dev, &config, &max, &lp_wm_1_2); @@ -2623,7 +2643,9 @@ static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc) if (IS_HASWELL(dev) || IS_BROADWELL(dev)) hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe)); - if (intel_crtc_active(crtc)) { + active->pipe_enabled = intel_crtc_active(crtc); + + if (active->pipe_enabled) { u32 tmp = hw->wm_pipe[pipe]; /* -- cgit v1.2.3 From fe392efdae2982243e3a560b8f41c8e4c89b5d51 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 7 Mar 2014 18:32:10 +0200 Subject: drm/i915: Skip watermark merging for inactive pipes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Even though the inactive pipes should have their watermarks set to all 0 with enable=true, we can possibly shave off a few cycles by completely skipping the merge procedure for inactive pipes. Signed-off-by: Ville Syrjälä Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 855c01b2b0c1..c0c0390dd52a 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2206,8 +2206,11 @@ static void ilk_merge_wm_level(struct drm_device *dev, const struct intel_crtc *intel_crtc; list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, base.head) { - const struct intel_wm_level *wm = - &intel_crtc->wm.active.wm[level]; + const struct intel_pipe_wm *active = &intel_crtc->wm.active; + const struct intel_wm_level *wm = &active->wm[level]; + + if (!active->pipe_enabled) + continue; if (!wm->enable) return; -- cgit v1.2.3 From 4e975081232a766b8e2e3e50d2efe374defb65bc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 7 Mar 2014 18:32:11 +0200 Subject: drm/i916: Refactor WM register maximums MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We will have another use for the maximum watermark values that the registers can hold. Pull those out into separate functions. Signed-off-by: Ville Syrjälä Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 66 +++++++++++++++++++++++------------------ 1 file changed, 37 insertions(+), 29 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index c0c0390dd52a..8531cf6e2774 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -1821,6 +1821,40 @@ static unsigned int ilk_display_fifo_size(const struct drm_device *dev) return 512; } +static unsigned int ilk_plane_wm_reg_max(const struct drm_device *dev, + int level, bool is_sprite) +{ + if (INTEL_INFO(dev)->gen >= 8) + /* BDW primary/sprite plane watermarks */ + return level == 0 ? 255 : 2047; + else if (INTEL_INFO(dev)->gen >= 7) + /* IVB/HSW primary/sprite plane watermarks */ + return level == 0 ? 127 : 1023; + else if (!is_sprite) + /* ILK/SNB primary plane watermarks */ + return level == 0 ? 127 : 511; + else + /* ILK/SNB sprite plane watermarks */ + return level == 0 ? 63 : 255; +} + +static unsigned int ilk_cursor_wm_reg_max(const struct drm_device *dev, + int level) +{ + if (INTEL_INFO(dev)->gen >= 7) + return level == 0 ? 63 : 255; + else + return level == 0 ? 31 : 63; +} + +static unsigned int ilk_fbc_wm_reg_max(const struct drm_device *dev) +{ + if (INTEL_INFO(dev)->gen >= 8) + return 31; + else + return 15; +} + /* Calculate the maximum primary/sprite plane watermark */ static unsigned int ilk_plane_wm_max(const struct drm_device *dev, int level, @@ -1829,7 +1863,6 @@ static unsigned int ilk_plane_wm_max(const struct drm_device *dev, bool is_sprite) { unsigned int fifo_size = ilk_display_fifo_size(dev); - unsigned int max; /* if sprites aren't enabled, sprites get nothing */ if (is_sprite && !config->sprites_enabled) @@ -1860,19 +1893,7 @@ static unsigned int ilk_plane_wm_max(const struct drm_device *dev, } /* clamp to max that the registers can hold */ - if (INTEL_INFO(dev)->gen >= 8) - max = level == 0 ? 255 : 2047; - else if (INTEL_INFO(dev)->gen >= 7) - /* IVB/HSW primary/sprite plane watermarks */ - max = level == 0 ? 127 : 1023; - else if (!is_sprite) - /* ILK/SNB primary plane watermarks */ - max = level == 0 ? 127 : 511; - else - /* ILK/SNB sprite plane watermarks */ - max = level == 0 ? 63 : 255; - - return min(fifo_size, max); + return min(fifo_size, ilk_plane_wm_reg_max(dev, level, is_sprite)); } /* Calculate the maximum cursor plane watermark */ @@ -1885,20 +1906,7 @@ static unsigned int ilk_cursor_wm_max(const struct drm_device *dev, return 64; /* otherwise just report max that registers can hold */ - if (INTEL_INFO(dev)->gen >= 7) - return level == 0 ? 63 : 255; - else - return level == 0 ? 31 : 63; -} - -/* Calculate the maximum FBC watermark */ -static unsigned int ilk_fbc_wm_max(const struct drm_device *dev) -{ - /* max that registers can hold */ - if (INTEL_INFO(dev)->gen >= 8) - return 31; - else - return 15; + return ilk_cursor_wm_reg_max(dev, level); } static void ilk_compute_wm_maximums(const struct drm_device *dev, @@ -1910,7 +1918,7 @@ static void ilk_compute_wm_maximums(const struct drm_device *dev, max->pri = ilk_plane_wm_max(dev, level, config, ddb_partitioning, false); max->spr = ilk_plane_wm_max(dev, level, config, ddb_partitioning, true); max->cur = ilk_cursor_wm_max(dev, level, config); - max->fbc = ilk_fbc_wm_max(dev); + max->fbc = ilk_fbc_wm_reg_max(dev); } static bool ilk_validate_wm_level(int level, -- cgit v1.2.3 From 6a2b8021d22a7d597bb913b0e3832ad5cdb825ca Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 2 Apr 2014 10:08:51 -0700 Subject: drm/i915/vlv: write the port field in the per-pipe DIP control reg MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In case we end up bouncing these around between ports. Signed-off-by: Jesse Barnes Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_hdmi.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index b0413e190625..ee892a4f9090 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -557,10 +557,12 @@ static void vlv_set_infoframes(struct drm_encoder *encoder, struct drm_display_mode *adjusted_mode) { struct drm_i915_private *dev_priv = encoder->dev->dev_private; + struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); u32 reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe); u32 val = I915_READ(reg); + u32 port = VIDEO_DIP_PORT(intel_dig_port->port); assert_hdmi_port_disabled(intel_hdmi); @@ -576,6 +578,16 @@ static void vlv_set_infoframes(struct drm_encoder *encoder, return; } + if (port != (val & VIDEO_DIP_PORT_MASK)) { + if (val & VIDEO_DIP_ENABLE) { + val &= ~VIDEO_DIP_ENABLE; + I915_WRITE(reg, val); + POSTING_READ(reg); + } + val &= ~VIDEO_DIP_PORT_MASK; + val |= port; + } + val |= VIDEO_DIP_ENABLE; val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT | VIDEO_DIP_ENABLE_GCP); -- cgit v1.2.3 From 4d47dfb8ef95bd13663fe8e93ab6e5d63cc1bb4b Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 2 Apr 2014 10:08:52 -0700 Subject: drm/i915/vlv: disable AVI infoframe emission when writing infoframes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We also do a disable later when we write a specific infoframe, but here we do it to prevent sending a stale one before updating the infoframes. Signed-off-by: Jesse Barnes Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_hdmi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index ee892a4f9090..3b804fcb1672 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -589,8 +589,8 @@ static void vlv_set_infoframes(struct drm_encoder *encoder, } val |= VIDEO_DIP_ENABLE; - val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT | - VIDEO_DIP_ENABLE_GCP); + val &= ~(VIDEO_DIP_ENABLE_AVI | VIDEO_DIP_ENABLE_VENDOR | + VIDEO_DIP_ENABLE_GAMUT | VIDEO_DIP_ENABLE_GCP); I915_WRITE(reg, val); POSTING_READ(reg); -- cgit v1.2.3 From 759c85e778f4f99f2f7eaa599c57b0c0ada97d08 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 2 Apr 2014 10:08:53 -0700 Subject: drm/i915: enable HDMI mode on VLV when an HDMI sink is detected MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Allows sending of the null packets for conformance. Signed-off-by: Jesse Barnes Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_hdmi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 3b804fcb1672..fb9839b0effa 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -650,8 +650,8 @@ static void intel_hdmi_mode_set(struct intel_encoder *encoder) else hdmi_val |= SDVO_COLOR_FORMAT_8bpc; - /* Required on CPT */ - if (intel_hdmi->has_hdmi_sink && HAS_PCH_CPT(dev)) + if (intel_hdmi->has_hdmi_sink && + (HAS_PCH_CPT(dev) || IS_VALLEYVIEW(dev))) hdmi_val |= HDMI_MODE_SELECT_HDMI; if (intel_hdmi->has_audio) { -- cgit v1.2.3 From 13732ba7493fd4b28568f768ee12497e26a0c8af Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Sat, 5 Apr 2014 11:51:35 -0700 Subject: drm/i915: move infoframe setting to after pll enable v3 Needs to happen after clock is running or it doesn't behave correctly. v2: fix subject (Ville) make it clearer that this occurs in pre_enable (Paulo) misc bikesheds (Paulo) Signed-off-by: Jesse Barnes Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_hdmi.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index fb9839b0effa..fd940a7e6e2f 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -669,8 +669,6 @@ static void intel_hdmi_mode_set(struct intel_encoder *encoder) I915_WRITE(intel_hdmi->hdmi_reg, hdmi_val); POSTING_READ(intel_hdmi->hdmi_reg); - - intel_hdmi->set_infoframes(&encoder->base, adjusted_mode); } static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder, @@ -1115,13 +1113,26 @@ done: return 0; } +static void intel_hdmi_pre_enable(struct intel_encoder *encoder) +{ + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + struct drm_display_mode *adjusted_mode = + &intel_crtc->config.adjusted_mode; + + intel_hdmi->set_infoframes(&encoder->base, adjusted_mode); +} + static void vlv_hdmi_pre_enable(struct intel_encoder *encoder) { struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); + struct intel_hdmi *intel_hdmi = &dport->hdmi; struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + struct drm_display_mode *adjusted_mode = + &intel_crtc->config.adjusted_mode; enum dpio_channel port = vlv_dport_to_channel(dport); int pipe = intel_crtc->pipe; u32 val; @@ -1155,6 +1166,8 @@ static void vlv_hdmi_pre_enable(struct intel_encoder *encoder) vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888); mutex_unlock(&dev_priv->dpio_lock); + intel_hdmi->set_infoframes(&encoder->base, adjusted_mode); + intel_enable_hdmi(encoder); vlv_wait_port_ready(dev_priv, dport); @@ -1350,6 +1363,7 @@ void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port) intel_encoder->enable = vlv_enable_hdmi; intel_encoder->post_disable = vlv_hdmi_post_disable; } else { + intel_encoder->pre_enable = intel_hdmi_pre_enable; intel_encoder->enable = intel_enable_hdmi; } -- cgit v1.2.3 From 7ec55f46da2e581e0e85b17e5480dc4ae6254099 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Mon, 7 Apr 2014 20:24:32 +0100 Subject: drm/i915: Protect the argument expansion in LRI and SRM macros It seems like it wouldn't be too unlikely to be wanting to use a an expression in the macro argument and things could go very wrong. Signed-off-by: Damien Lespiau Reviewed-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 8e60737c9c57..c03c83c76c70 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -265,8 +265,8 @@ * - One can actually load arbitrary many arbitrary registers: Simply issue x * address/value pairs. Don't overdue it, though, x <= 2^4 must hold! */ -#define MI_LOAD_REGISTER_IMM(x) MI_INSTR(0x22, 2*x-1) -#define MI_STORE_REGISTER_MEM(x) MI_INSTR(0x24, 2*x-1) +#define MI_LOAD_REGISTER_IMM(x) MI_INSTR(0x22, 2*(x)-1) +#define MI_STORE_REGISTER_MEM(x) MI_INSTR(0x24, 2*(x)-1) #define MI_SRM_LRM_GLOBAL_GTT (1<<22) #define MI_FLUSH_DW MI_INSTR(0x26, 1) /* for GEN6 */ #define MI_FLUSH_DW_STORE_INDEX (1<<21) -- cgit v1.2.3 From b76bfebab54236f90763afda9cda6cd6279b0de4 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Mon, 7 Apr 2014 20:24:33 +0100 Subject: drm/i915/bdw: Provide a gen8 version of SRM GEN8 now has a qword to code for 48bit addresses. Signed-off-by: Damien Lespiau Reviewed-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index c03c83c76c70..0d6202ad484d 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -267,6 +267,7 @@ */ #define MI_LOAD_REGISTER_IMM(x) MI_INSTR(0x22, 2*(x)-1) #define MI_STORE_REGISTER_MEM(x) MI_INSTR(0x24, 2*(x)-1) +#define MI_STORE_REGISTER_MEM_GEN8(x) MI_INSTR(0x24, 3*(x)-1) #define MI_SRM_LRM_GLOBAL_GTT (1<<22) #define MI_FLUSH_DW MI_INSTR(0x26, 1) /* for GEN6 */ #define MI_FLUSH_DW_STORE_INDEX (1<<21) -- cgit v1.2.3 From f476828a74b97096967104967e41b405ef07348a Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Mon, 7 Apr 2014 20:24:34 +0100 Subject: drm/i915/bdw: Use the GEN8 SRM when qeueing a flip Comment from Ben: It's a bit unclear whether we need this dance still on bdw. Signed-off-by: Damien Lespiau Reviewed-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b2ec242add84..430228cdcd75 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8818,8 +8818,16 @@ static int intel_gen7_queue_flip(struct drm_device *dev, } len = 4; - if (ring->id == RCS) + if (ring->id == RCS) { len += 6; + /* + * On Gen 8, SRM is now taking an extra dword to accommodate + * 48bits addresses, and we need a NOOP for the batch size to + * stay even. + */ + if (IS_GEN8(dev)) + len += 2; + } /* * BSpec MI_DISPLAY_FLIP for IVB: @@ -8854,10 +8862,18 @@ static int intel_gen7_queue_flip(struct drm_device *dev, intel_ring_emit(ring, ~(DERRMR_PIPEA_PRI_FLIP_DONE | DERRMR_PIPEB_PRI_FLIP_DONE | DERRMR_PIPEC_PRI_FLIP_DONE)); - intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) | - MI_SRM_LRM_GLOBAL_GTT); + if (IS_GEN8(dev)) + intel_ring_emit(ring, MI_STORE_REGISTER_MEM_GEN8(1) | + MI_SRM_LRM_GLOBAL_GTT); + else + intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) | + MI_SRM_LRM_GLOBAL_GTT); intel_ring_emit(ring, DERRMR); intel_ring_emit(ring, ring->scratch.gtt_offset + 256); + if (IS_GEN8(dev)) { + intel_ring_emit(ring, 0); + intel_ring_emit(ring, MI_NOOP); + } } intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit); -- cgit v1.2.3 From ce7ec768d61672bcc45c10dd5bc2123ba1e7091f Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Apr 2014 17:01:47 -0300 Subject: drm/i915: dma_buf_vunmap is presumed not to fail, don't let it Since dma_buf_vunmap() procedes blithely on ignorant of whether the driver failed to actually unmap the backing storage for the dma-buf, we need to make a best-effort to do so. This involves not allowing ourselves to be susceptible to signals causing us to leak the storage. This should have been detectable with the current i-g-t as a misplaced signal should have left the pages pinned upon freeing the object where we have a warning in place. Signed-off-by: Chris Wilson Signed-off-by: Rodrigo Vivi Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_dmabuf.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_gem_dmabuf.c b/drivers/gpu/drm/i915/i915_gem_dmabuf.c index 9bb533e0d762..321102a8374b 100644 --- a/drivers/gpu/drm/i915/i915_gem_dmabuf.c +++ b/drivers/gpu/drm/i915/i915_gem_dmabuf.c @@ -161,12 +161,8 @@ static void i915_gem_dmabuf_vunmap(struct dma_buf *dma_buf, void *vaddr) { struct drm_i915_gem_object *obj = dma_buf_to_obj(dma_buf); struct drm_device *dev = obj->base.dev; - int ret; - - ret = i915_mutex_lock_interruptible(dev); - if (ret) - return; + mutex_lock(&dev->struct_mutex); if (--obj->vmapping_count == 0) { vunmap(obj->dma_buf_vmapping); obj->dma_buf_vmapping = NULL; -- cgit v1.2.3 From 88b4aa8770d7779b7eaad47a0b5a32374f07f476 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Fri, 28 Mar 2014 18:18:18 +0200 Subject: drm/i915: add flags to i915_ring_stop Piglit runner and QA are both looking at the dmesg for DRM_ERRORs with test cases. Add a flag to control those when we they are expected from related test cases. Also add flag to control if contexts should be banned that introduced the hang. Hangcheck is timer based and preventing bans by adding sleeps to testcases makes testing slower. v2: intel_ring_stopped(), readable comment (Chris) v3: keep compatibility (Daniel) References: https://bugs.freedesktop.org/show_bug.cgi?id=75876 Signed-off-by: Mika Kuoppala Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 20 ++++++++++++++++++-- drivers/gpu/drm/i915/i915_gem.c | 5 +++-- drivers/gpu/drm/i915/intel_ringbuffer.c | 8 ++++++-- 3 files changed, 27 insertions(+), 6 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 55addaaa8222..3ea9f7ea14f1 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1099,8 +1099,12 @@ struct i915_gpu_error { */ wait_queue_head_t reset_queue; - /* For gpu hang simulation. */ - unsigned int stop_rings; + /* Userspace knobs for gpu hang simulation; + * combines both a ring mask, and extra flags + */ + u32 stop_rings; +#define I915_STOP_RING_ALLOW_BAN (1 << 31) +#define I915_STOP_RING_ALLOW_WARN (1 << 30) /* For missed irq/seqno simulation. */ unsigned int test_irq_rings; @@ -2146,6 +2150,18 @@ static inline u32 i915_reset_count(struct i915_gpu_error *error) return ((atomic_read(&error->reset_counter) & ~I915_WEDGED) + 1) / 2; } +static inline bool i915_stop_ring_allow_ban(struct drm_i915_private *dev_priv) +{ + return dev_priv->gpu_error.stop_rings == 0 || + dev_priv->gpu_error.stop_rings & I915_STOP_RING_ALLOW_BAN; +} + +static inline bool i915_stop_ring_allow_warn(struct drm_i915_private *dev_priv) +{ + return dev_priv->gpu_error.stop_rings == 0 || + dev_priv->gpu_error.stop_rings & I915_STOP_RING_ALLOW_WARN; +} + void i915_gem_reset(struct drm_device *dev); bool i915_gem_clflush_object(struct drm_i915_gem_object *obj, bool force); int __must_check i915_gem_object_finish_gpu(struct drm_i915_gem_object *obj); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6370a761d137..85c9cf055f55 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2277,8 +2277,9 @@ static bool i915_context_is_banned(struct drm_i915_private *dev_priv, if (!i915_gem_context_is_default(ctx)) { DRM_DEBUG("context hanging too fast, banning!\n"); return true; - } else if (dev_priv->gpu_error.stop_rings == 0) { - DRM_ERROR("gpu hanging too fast, banning!\n"); + } else if (i915_stop_ring_allow_ban(dev_priv)) { + if (i915_stop_ring_allow_warn(dev_priv)) + DRM_ERROR("gpu hanging too fast, banning!\n"); return true; } } diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 3d76ce135a05..eb3dd26b94de 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -41,12 +41,16 @@ static inline int ring_space(struct intel_ring_buffer *ring) return space; } -void __intel_ring_advance(struct intel_ring_buffer *ring) +static bool intel_ring_stopped(struct intel_ring_buffer *ring) { struct drm_i915_private *dev_priv = ring->dev->dev_private; + return dev_priv->gpu_error.stop_rings & intel_ring_flag(ring); +} +void __intel_ring_advance(struct intel_ring_buffer *ring) +{ ring->tail &= ring->size - 1; - if (dev_priv->gpu_error.stop_rings & intel_ring_flag(ring)) + if (intel_ring_stopped(ring)) return; ring->write_tail(ring, ring->tail); } -- cgit v1.2.3 From d0e1f1cbe3e4536439d0c92610ded57923755a34 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Tue, 8 Apr 2014 01:22:44 +0100 Subject: drm/i915: Rename GEN8_PIPE_FLIP_DONE to PRIMARY_FLIP_DONE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It is now clear that this interrupt is for the primary plane and not something global to the pipe. It also matches what the spec calls it. Signed-off-by: Damien Lespiau Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 4 ++-- drivers/gpu/drm/i915/i915_reg.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 4ca0344c2ae4..7a4d3ae807df 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2060,7 +2060,7 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg) if (pipe_iir & GEN8_PIPE_VBLANK) drm_handle_vblank(dev, pipe); - if (pipe_iir & GEN8_PIPE_FLIP_DONE) { + if (pipe_iir & GEN8_PIPE_PRIMARY_FLIP_DONE) { intel_prepare_page_flip(dev, pipe); intel_finish_page_flip_plane(dev, pipe); } @@ -3250,7 +3250,7 @@ static void gen8_gt_irq_postinstall(struct drm_i915_private *dev_priv) static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv) { struct drm_device *dev = dev_priv->dev; - uint32_t de_pipe_masked = GEN8_PIPE_FLIP_DONE | + uint32_t de_pipe_masked = GEN8_PIPE_PRIMARY_FLIP_DONE | GEN8_PIPE_CDCLK_CRC_DONE | GEN8_DE_PIPE_IRQ_FAULT_ERRORS; uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK | diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 0d6202ad484d..01c05af1bae7 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -4210,7 +4210,7 @@ enum punit_power_well { #define GEN8_PIPE_SPRITE_FAULT (1 << 9) #define GEN8_PIPE_PRIMARY_FAULT (1 << 8) #define GEN8_PIPE_SPRITE_FLIP_DONE (1 << 5) -#define GEN8_PIPE_FLIP_DONE (1 << 4) +#define GEN8_PIPE_PRIMARY_FLIP_DONE (1 << 4) #define GEN8_PIPE_SCAN_LINE_EVENT (1 << 2) #define GEN8_PIPE_VSYNC (1 << 1) #define GEN8_PIPE_VBLANK (1 << 0) -- cgit v1.2.3 From 932aae42530489938825dd78fde14a0b667954f0 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Tue, 8 Apr 2014 12:07:29 +0100 Subject: drm/i915: Remove misleading debug message haswell_write_eld() is also used on broadwell, so let's not explicitely mention Haswell. The rest of the function has plenty of debug output which will print the function name, so we know where we are anyway. Signed-off-by: Damien Lespiau Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 430228cdcd75..51b3603d5ed7 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7369,9 +7369,6 @@ static void haswell_write_eld(struct drm_connector *connector, int aud_config = HSW_AUD_CFG(pipe); int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD; - - DRM_DEBUG_DRIVER("HDMI: Haswell Audio initialize....\n"); - /* Audio output enable */ DRM_DEBUG_DRIVER("HDMI audio: enable codec\n"); tmp = I915_READ(aud_cntrl_st2); -- cgit v1.2.3 From 113a047633eb7ee2a1d14cc258d7e5bca9215f73 Mon Sep 17 00:00:00 2001 From: Brad Volkin Date: Tue, 8 Apr 2014 14:18:58 -0700 Subject: drm/i915: Add more registers to the whitelist for mesa These are additional registers needed for performance monitoring and ARB_draw_indirect extensions in mesa. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76719 Cc: Kenneth Graunke Signed-off-by: Brad Volkin Reviewed-by: Kenneth Graunke [danvet: Squash in fixup from Brad requested by Ken.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_cmd_parser.c | 10 ++++++++++ drivers/gpu/drm/i915/i915_reg.h | 9 +++++++++ 2 files changed, 19 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index 29184d6c0027..9bac0979a294 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -408,10 +408,20 @@ static const u32 gen7_render_regs[] = { REG64(PS_INVOCATION_COUNT), REG64(PS_DEPTH_COUNT), OACONTROL, /* Only allowed for LRI and SRM. See below. */ + GEN7_3DPRIM_END_OFFSET, + GEN7_3DPRIM_START_VERTEX, + GEN7_3DPRIM_VERTEX_COUNT, + GEN7_3DPRIM_INSTANCE_COUNT, + GEN7_3DPRIM_START_INSTANCE, + GEN7_3DPRIM_BASE_VERTEX, REG64(GEN7_SO_NUM_PRIMS_WRITTEN(0)), REG64(GEN7_SO_NUM_PRIMS_WRITTEN(1)), REG64(GEN7_SO_NUM_PRIMS_WRITTEN(2)), REG64(GEN7_SO_NUM_PRIMS_WRITTEN(3)), + REG64(GEN7_SO_PRIM_STORAGE_NEEDED(0)), + REG64(GEN7_SO_PRIM_STORAGE_NEEDED(1)), + REG64(GEN7_SO_PRIM_STORAGE_NEEDED(2)), + REG64(GEN7_SO_PRIM_STORAGE_NEEDED(3)), GEN7_SO_WRITE_OFFSET(0), GEN7_SO_WRITE_OFFSET(1), GEN7_SO_WRITE_OFFSET(2), diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 01c05af1bae7..46ea2332e45c 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -428,6 +428,15 @@ /* There are the 4 64-bit counter registers, one for each stream output */ #define GEN7_SO_NUM_PRIMS_WRITTEN(n) (0x5200 + (n) * 8) +#define GEN7_SO_PRIM_STORAGE_NEEDED(n) (0x5240 + (n) * 8) + +#define GEN7_3DPRIM_END_OFFSET 0x2420 +#define GEN7_3DPRIM_START_VERTEX 0x2430 +#define GEN7_3DPRIM_VERTEX_COUNT 0x2434 +#define GEN7_3DPRIM_INSTANCE_COUNT 0x2438 +#define GEN7_3DPRIM_START_INSTANCE 0x243C +#define GEN7_3DPRIM_BASE_VERTEX 0x2440 + #define OACONTROL 0x2360 #define _GEN7_PIPEA_DE_LOAD_SL 0x70068 -- cgit v1.2.3 From 2095f9fc06f2222dd81866306f777cc5f52659ab Mon Sep 17 00:00:00 2001 From: Shobhit Kumar Date: Wed, 9 Apr 2014 13:59:30 +0530 Subject: drm/i915: Program Rcomp and band gap reset everytime we resume from power gate Signed-off-by: Shobhit Kumar Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dsi.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 33656647f8bc..7ceb8c67344a 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -110,6 +110,15 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder) DRM_DEBUG_KMS("\n"); + mutex_lock(&dev_priv->dpio_lock); + /* program rcomp for compliance, reduce from 50 ohms to 45 ohms + * needed everytime after power gate */ + vlv_flisdsi_write(dev_priv, 0x04, 0x0004); + mutex_unlock(&dev_priv->dpio_lock); + + /* bandgap reset is needed after everytime we do power gate */ + band_gap_reset(dev_priv); + val = I915_READ(MIPI_PORT_CTRL(pipe)); I915_WRITE(MIPI_PORT_CTRL(pipe), val | LP_OUTPUT_HOLD); usleep_range(1000, 1500); @@ -379,9 +388,6 @@ static void intel_dsi_mode_set(struct intel_encoder *intel_encoder) DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe)); - /* XXX: Location of the call */ - band_gap_reset(dev_priv); - /* escape clock divider, 20MHz, shared for A and C. device ready must be * off when doing this! txclkesc? */ tmp = I915_READ(MIPI_CTRL(0)); -- cgit v1.2.3 From 2634fd7fd8516039a6f2cb037de8e017fbb9fff7 Mon Sep 17 00:00:00 2001 From: Shobhit Kumar Date: Wed, 9 Apr 2014 13:59:31 +0530 Subject: drm/i915: Enable MIPI port before the plane and pipe enable As per the hw team's recommendation we need to enable the MIPI port before enabling the plane and pipe. So call MIPI port enable in pre_enable phase itself Signed-off-by: Shobhit Kumar Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dsi.c | 51 ++++++++++++++++++++++++++-------------- 1 file changed, 33 insertions(+), 18 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 7ceb8c67344a..569e6c6e1099 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -131,21 +131,6 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder) I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY); usleep_range(2000, 2500); } -static void intel_dsi_pre_enable(struct intel_encoder *encoder) -{ - struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); - - DRM_DEBUG_KMS("\n"); - - if (intel_dsi->dev.dev_ops->panel_reset) - intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev); - - /* put device in ready state */ - intel_dsi_device_ready(encoder); - - if (intel_dsi->dev.dev_ops->send_otp_cmds) - intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev); -} static void intel_dsi_enable(struct intel_encoder *encoder) { @@ -165,15 +150,45 @@ static void intel_dsi_enable(struct intel_encoder *encoder) dpi_send_cmd(intel_dsi, TURN_ON); msleep(100); + if (intel_dsi->dev.dev_ops->enable) + intel_dsi->dev.dev_ops->enable(&intel_dsi->dev); + /* assert ip_tg_enable signal */ temp = I915_READ(MIPI_PORT_CTRL(pipe)) & ~LANE_CONFIGURATION_MASK; temp = temp | intel_dsi->port_bits; I915_WRITE(MIPI_PORT_CTRL(pipe), temp | DPI_ENABLE); POSTING_READ(MIPI_PORT_CTRL(pipe)); } +} + +static void intel_dsi_pre_enable(struct intel_encoder *encoder) +{ + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + + DRM_DEBUG_KMS("\n"); + + if (intel_dsi->dev.dev_ops->panel_reset) + intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev); + + /* put device in ready state */ + intel_dsi_device_ready(encoder); - if (intel_dsi->dev.dev_ops->enable) - intel_dsi->dev.dev_ops->enable(&intel_dsi->dev); + if (intel_dsi->dev.dev_ops->send_otp_cmds) + intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev); + + /* Enable port in pre-enable phase itself because as per hw team + * recommendation, port should be enabled befor plane & pipe */ + intel_dsi_enable(encoder); +} + +static void intel_dsi_enable_nop(struct intel_encoder *encoder) +{ + DRM_DEBUG_KMS("\n"); + + /* for DSI port enable has to be done before pipe + * and plane enable, so port enable is done in + * pre_enable phase itself unlike other encoders + */ } static void intel_dsi_disable(struct intel_encoder *encoder) @@ -600,7 +615,7 @@ bool intel_dsi_init(struct drm_device *dev) intel_encoder->compute_config = intel_dsi_compute_config; intel_encoder->pre_pll_enable = intel_dsi_pre_pll_enable; intel_encoder->pre_enable = intel_dsi_pre_enable; - intel_encoder->enable = intel_dsi_enable; + intel_encoder->enable = intel_dsi_enable_nop; intel_encoder->mode_set = intel_dsi_mode_set; intel_encoder->disable = intel_dsi_disable; intel_encoder->post_disable = intel_dsi_post_disable; -- cgit v1.2.3 From 20e5bf667aa714e8010b0faa36fbb89ac2757e86 Mon Sep 17 00:00:00 2001 From: Shobhit Kumar Date: Wed, 9 Apr 2014 13:59:32 +0530 Subject: drm/i915: Disable DPOunit clock gating Otherwise, this can stall pipe. We also need DPLL REFA always enabled Signed-off-by: Shobhit Kumar Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dsi.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 569e6c6e1099..4793a5b3e00f 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -163,16 +163,31 @@ static void intel_dsi_enable(struct intel_encoder *encoder) static void intel_dsi_pre_enable(struct intel_encoder *encoder) { + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + enum pipe pipe = intel_crtc->pipe; + u32 tmp; DRM_DEBUG_KMS("\n"); - if (intel_dsi->dev.dev_ops->panel_reset) - intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev); + /* Disable DPOunit clock gating, can stall pipe + * and we need DPLL REFA always enabled */ + tmp = I915_READ(DPLL(pipe)); + tmp |= DPLL_REFA_CLK_ENABLE_VLV; + I915_WRITE(DPLL(pipe), tmp); + + tmp = I915_READ(DSPCLK_GATE_D); + tmp |= DPOUNIT_CLOCK_GATE_DISABLE; + I915_WRITE(DSPCLK_GATE_D, tmp); /* put device in ready state */ intel_dsi_device_ready(encoder); + if (intel_dsi->dev.dev_ops->panel_reset) + intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev); + if (intel_dsi->dev.dev_ops->send_otp_cmds) intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev); @@ -251,14 +266,21 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) vlv_disable_dsi_pll(encoder); } + static void intel_dsi_post_disable(struct intel_encoder *encoder) { + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + u32 val; DRM_DEBUG_KMS("\n"); intel_dsi_clear_device_ready(encoder); + val = I915_READ(DSPCLK_GATE_D); + val &= ~DPOUNIT_CLOCK_GATE_DISABLE; + I915_WRITE(DSPCLK_GATE_D, val); + if (intel_dsi->dev.dev_ops->disable_panel_power) intel_dsi->dev.dev_ops->disable_panel_power(&intel_dsi->dev); } -- cgit v1.2.3 From f1c79f16d76f4698174a85921c5afb2c06ac614f Mon Sep 17 00:00:00 2001 From: Shobhit Kumar Date: Wed, 9 Apr 2014 13:59:33 +0530 Subject: drm/i915: Parameterize the Clockstop and escape_clk_div In preparation for Generic driver Signed-off-by: Shobhit Kumar Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dsi.c | 11 +++++++++-- drivers/gpu/drm/i915/intel_dsi.h | 4 +++- 2 files changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 4793a5b3e00f..dfcdb1068495 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -495,10 +495,17 @@ static void intel_dsi_mode_set(struct intel_encoder *intel_encoder) /* dphy stuff */ /* in terms of low power clock */ - I915_WRITE(MIPI_INIT_COUNT(pipe), txclkesc(ESCAPE_CLOCK_DIVIDER_1, 100)); + I915_WRITE(MIPI_INIT_COUNT(pipe), txclkesc(intel_dsi->escape_clk_div, 100)); + + val = 0; + if (intel_dsi->eotp_pkt == 0) + val |= EOT_DISABLE; + + if (intel_dsi->clock_stop) + val |= CLOCKSTOP; /* recovery disables */ - I915_WRITE(MIPI_EOT_DISABLE(pipe), intel_dsi->eot_disable); + I915_WRITE(MIPI_EOT_DISABLE(pipe), val); /* in terms of txbyteclkhs. actual high to low switch + * MIPI_STOP_STATE_STALL * MIPI_LP_BYTECLK. diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h index b4a27cec882f..550714c7860e 100644 --- a/drivers/gpu/drm/i915/intel_dsi.h +++ b/drivers/gpu/drm/i915/intel_dsi.h @@ -95,8 +95,10 @@ struct intel_dsi { u32 video_mode_format; /* eot for MIPI_EOT_DISABLE register */ - u32 eot_disable; + u8 eotp_pkt; + u8 clock_stop; + u8 escape_clk_div; u32 port_bits; u32 bw_timer; u32 dphy_reg; -- cgit v1.2.3 From 339023ec342a63f885d8100eafe84dac515a0c8f Mon Sep 17 00:00:00 2001 From: Shobhit Kumar Date: Wed, 9 Apr 2014 13:59:34 +0530 Subject: drm/i915: Panel commands can be sent only when clock is in LP11 Signed-off-by: Shobhit Kumar Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dsi.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index dfcdb1068495..d8eccda04767 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -229,6 +229,23 @@ static void intel_dsi_disable(struct intel_encoder *encoder) msleep(2); } + /* Panel commands can be sent when clock is in LP11 */ + I915_WRITE(MIPI_DEVICE_READY(pipe), 0x0); + + temp = I915_READ(MIPI_CTRL(pipe)); + temp &= ~ESCAPE_CLOCK_DIVIDER_MASK; + I915_WRITE(MIPI_CTRL(pipe), temp | + intel_dsi->escape_clk_div << + ESCAPE_CLOCK_DIVIDER_SHIFT); + + I915_WRITE(MIPI_EOT_DISABLE(pipe), CLOCKSTOP); + + temp = I915_READ(MIPI_DSI_FUNC_PRG(pipe)); + temp &= ~VID_MODE_FORMAT_MASK; + I915_WRITE(MIPI_DSI_FUNC_PRG(pipe), temp); + + I915_WRITE(MIPI_DEVICE_READY(pipe), 0x1); + /* if disable packets are sent before sending shutdown packet then in * some next enable sequence send turn on packet error is observed */ if (intel_dsi->dev.dev_ops->disable) -- cgit v1.2.3 From e1047028e224a38928bffa786bb8d981d294a1cf Mon Sep 17 00:00:00 2001 From: Shobhit Kumar Date: Wed, 9 Apr 2014 13:59:35 +0530 Subject: drm/i915: Send DPI command explicitely in LP mode Though HS mode also should work. v2: Change parameter as "bool hs" as suggested by Jani Signed-off-by: Shobhit Kumar Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dsi.c | 5 +++-- drivers/gpu/drm/i915/intel_dsi_cmd.c | 4 ++-- drivers/gpu/drm/i915/intel_dsi_cmd.h | 5 ++++- 3 files changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index d8eccda04767..b5948b7f3c26 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -147,7 +147,7 @@ static void intel_dsi_enable(struct intel_encoder *encoder) I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(pipe), 8 * 4); else { msleep(20); /* XXX */ - dpi_send_cmd(intel_dsi, TURN_ON); + dpi_send_cmd(intel_dsi, TURN_ON, DPI_LP_MODE_EN); msleep(100); if (intel_dsi->dev.dev_ops->enable) @@ -218,7 +218,8 @@ static void intel_dsi_disable(struct intel_encoder *encoder) DRM_DEBUG_KMS("\n"); if (is_vid_mode(intel_dsi)) { - dpi_send_cmd(intel_dsi, SHUTDOWN); + /* Send Shutdown command to the panel in LP mode */ + dpi_send_cmd(intel_dsi, SHUTDOWN, DPI_LP_MODE_EN); msleep(10); /* de-assert ip_tg_enable signal */ diff --git a/drivers/gpu/drm/i915/intel_dsi_cmd.c b/drivers/gpu/drm/i915/intel_dsi_cmd.c index 7c40f981d2c7..3eeb21b9fddf 100644 --- a/drivers/gpu/drm/i915/intel_dsi_cmd.c +++ b/drivers/gpu/drm/i915/intel_dsi_cmd.c @@ -389,7 +389,7 @@ int dsi_vc_generic_read(struct intel_dsi *intel_dsi, int channel, * * XXX: commands with data in MIPI_DPI_DATA? */ -int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd) +int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs) { struct drm_encoder *encoder = &intel_dsi->base.base; struct drm_device *dev = encoder->dev; @@ -399,7 +399,7 @@ int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd) u32 mask; /* XXX: pipe, hs */ - if (intel_dsi->hs) + if (hs) cmd &= ~DPI_LP_MODE; else cmd |= DPI_LP_MODE; diff --git a/drivers/gpu/drm/i915/intel_dsi_cmd.h b/drivers/gpu/drm/i915/intel_dsi_cmd.h index 54c8a234a2e0..9a18cbfa5460 100644 --- a/drivers/gpu/drm/i915/intel_dsi_cmd.h +++ b/drivers/gpu/drm/i915/intel_dsi_cmd.h @@ -33,6 +33,9 @@ #include "intel_drv.h" #include "intel_dsi.h" +#define DPI_LP_MODE_EN false +#define DPI_HS_MODE_EN true + void dsi_hs_mode_enable(struct intel_dsi *intel_dsi, bool enable); int dsi_vc_dcs_write(struct intel_dsi *intel_dsi, int channel, @@ -47,7 +50,7 @@ int dsi_vc_dcs_read(struct intel_dsi *intel_dsi, int channel, u8 dcs_cmd, int dsi_vc_generic_read(struct intel_dsi *intel_dsi, int channel, u8 *reqdata, int reqlen, u8 *buf, int buflen); -int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd); +int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs); /* XXX: questionable write helpers */ static inline int dsi_vc_dcs_write_0(struct intel_dsi *intel_dsi, -- cgit v1.2.3 From 24d9c40140ff711d0f92db6975170c79209b2c8f Mon Sep 17 00:00:00 2001 From: Shobhit Kumar Date: Wed, 9 Apr 2014 13:59:36 +0530 Subject: drm/i915: Enable RANDOM resolution support for MIPI panels Some MIPI panels might not have resolution which is a multiple of 64 like 1366x768. Enable this feature for such panels by default Signed-off-by: Shobhit Kumar Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dsi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index b5948b7f3c26..4e271c768fd0 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -552,9 +552,14 @@ static void intel_dsi_mode_set(struct intel_encoder *intel_encoder) intel_dsi->clk_hs_to_lp_count << HS_LP_PWR_SW_CNT_SHIFT); if (is_vid_mode(intel_dsi)) + /* Some panels might have resolution which is not a multiple of + * 64 like 1366 x 768. Enable RANDOM resolution support for such + * panels by default */ I915_WRITE(MIPI_VIDEO_MODE_FORMAT(pipe), intel_dsi->video_frmt_cfg_bits | - intel_dsi->video_mode_format); + intel_dsi->video_mode_format | + IP_TG_CONFIG | + RANDOM_DPI_DISPLAY_RESOLUTION); } static enum drm_connector_status -- cgit v1.2.3 From 8179f1f04b115786ba843f53e7f28f2ab14023fb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 9 Apr 2014 13:27:59 +0300 Subject: drm/i915/chv: IS_BROADWELL() should not be true for Cherryview MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ville Syrjälä Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 3ea9f7ea14f1..8d2f25e2808b 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1788,7 +1788,7 @@ struct drm_i915_cmd_table { (dev)->pdev->device == 0x010A) #define IS_VALLEYVIEW(dev) (INTEL_INFO(dev)->is_valleyview) #define IS_HASWELL(dev) (INTEL_INFO(dev)->is_haswell) -#define IS_BROADWELL(dev) (INTEL_INFO(dev)->gen == 8) +#define IS_BROADWELL(dev) (!INTEL_INFO(dev)->is_valleyview && IS_GEN8(dev)) #define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile) #define IS_HSW_EARLY_SDV(dev) (IS_HASWELL(dev) && \ ((dev)->pdev->device & 0xFF00) == 0x0C00) -- cgit v1.2.3 From 6df4027b84d6600d070b5e58e4a16d67a3712449 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 9 Apr 2014 13:28:00 +0300 Subject: drm/i915/chv: Add IS_CHERRYVIEW() macro MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We will treat Cherryview like Valleyview for most parts. Add a macro for cases when we need to tell the two apart. Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 8d2f25e2808b..d0d8e6d6051c 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1787,6 +1787,7 @@ struct drm_i915_cmd_table { (dev)->pdev->device == 0x0106 || \ (dev)->pdev->device == 0x010A) #define IS_VALLEYVIEW(dev) (INTEL_INFO(dev)->is_valleyview) +#define IS_CHERRYVIEW(dev) (INTEL_INFO(dev)->is_valleyview && IS_GEN8(dev)) #define IS_HASWELL(dev) (INTEL_INFO(dev)->is_haswell) #define IS_BROADWELL(dev) (!INTEL_INFO(dev)->is_valleyview && IS_GEN8(dev)) #define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile) -- cgit v1.2.3 From 6ed6bd84ea06c81aa799c3db051eac001c474951 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Wed, 9 Apr 2014 14:33:08 +0100 Subject: drm/i915: Remove spurious semicolons Found by running the semicolon.cocci spatch: https://github.com/coccinelle/coccinellery/blob/master/semicolon/semicolon.cocci Signed-off-by: Damien Lespiau Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/dvo_ch7xxx.c | 2 +- drivers/gpu/drm/i915/dvo_ivch.c | 2 +- drivers/gpu/drm/i915/dvo_ns2501.c | 2 +- drivers/gpu/drm/i915/dvo_sil164.c | 2 +- drivers/gpu/drm/i915/dvo_tfp410.c | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c index a0f5bdd69491..80449f475960 100644 --- a/drivers/gpu/drm/i915/dvo_ch7xxx.c +++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c @@ -160,7 +160,7 @@ static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) if (i2c_transfer(adapter, msgs, 2) == 2) { *ch = in_buf[0]; return true; - }; + } if (!ch7xxx->quiet) { DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n", diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c index 0f1865d7d4d8..0f2587ff347c 100644 --- a/drivers/gpu/drm/i915/dvo_ivch.c +++ b/drivers/gpu/drm/i915/dvo_ivch.c @@ -195,7 +195,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) if (i2c_transfer(adapter, msgs, 3) == 3) { *data = (in_buf[1] << 8) | in_buf[0]; return true; - }; + } if (!priv->quiet) { DRM_DEBUG_KMS("Unable to read register 0x%02x from " diff --git a/drivers/gpu/drm/i915/dvo_ns2501.c b/drivers/gpu/drm/i915/dvo_ns2501.c index ccac3a151c6c..74f2af7c2d3e 100644 --- a/drivers/gpu/drm/i915/dvo_ns2501.c +++ b/drivers/gpu/drm/i915/dvo_ns2501.c @@ -121,7 +121,7 @@ static bool ns2501_readb(struct intel_dvo_device *dvo, int addr, uint8_t * ch) if (i2c_transfer(adapter, msgs, 2) == 2) { *ch = in_buf[0]; return true; - }; + } if (!ns->quiet) { DRM_DEBUG_KMS diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c index 7b3e9e936200..fa0114967076 100644 --- a/drivers/gpu/drm/i915/dvo_sil164.c +++ b/drivers/gpu/drm/i915/dvo_sil164.c @@ -93,7 +93,7 @@ static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) if (i2c_transfer(adapter, msgs, 2) == 2) { *ch = in_buf[0]; return true; - }; + } if (!sil->quiet) { DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n", diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c index 12ea4b164692..7853719a0e81 100644 --- a/drivers/gpu/drm/i915/dvo_tfp410.c +++ b/drivers/gpu/drm/i915/dvo_tfp410.c @@ -118,7 +118,7 @@ static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) if (i2c_transfer(adapter, msgs, 2) == 2) { *ch = in_buf[0]; return true; - }; + } if (!tfp->quiet) { DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n", -- cgit v1.2.3 From fc1744ff7ba63cabf858c55217382104e9dd94ed Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 10 Apr 2014 09:01:40 +0200 Subject: Revert "drm/i915: fix infinite loop at gen6_update_ring_freq" This reverts commit 4b28a1f3ef55a3b0b68dbab1fe6dbaf18e186710. This patch duct-tapes over some issue in the current bdw rps patches which must wait with enabling rc6/rps until the very first batch has been submitted by userspace. But those patches aren't merged yet, and for upstream we need to have an in-kernel emission of the very first batch. I shouldn't have merged this patch so let's revert it again. Also Imre noticed that even when rps is set up normally there's a small window (due to the 1s delay of the async rps init work) where we could runtime suspend already and blow up all over the place. Imre has a proper fix to block runtime pm until the rps init work has successfully completed. Cc: Paulo Zanoni Cc: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 8531cf6e2774..dc7adadbb945 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3522,8 +3522,7 @@ void gen6_update_ring_freq(struct drm_device *dev) * to use for memory access. We do this by specifying the IA frequency * the PCU should use as a reference to determine the ring frequency. */ - for (gpu_freq = dev_priv->rps.max_freq_softlimit; - gpu_freq >= dev_priv->rps.min_freq_softlimit && gpu_freq != 0; + for (gpu_freq = dev_priv->rps.max_freq_softlimit; gpu_freq >= dev_priv->rps.min_freq_softlimit; gpu_freq--) { int diff = dev_priv->rps.max_freq_softlimit - gpu_freq; unsigned int ia_freq = 0, ring_freq = 0; -- cgit v1.2.3 From 4f9db5b51cb1dfa9b6d5060dc4316e82d53e1b6c Mon Sep 17 00:00:00 2001 From: Pradeep Bhat Date: Sat, 5 Apr 2014 12:12:31 +0530 Subject: drm/i915: Parse EDID probed modes for DRRS support This patch and finds out the lowest refresh rate supported for the resolution same as the fixed_mode. It also checks the VBT fields to see if panel supports seamless DRRS or not. Based on above data it marks whether eDP panel supports seamless DRRS or not. This information is needed for supporting seamless DRRS switch for certain power saving usecases. This patch is tested by enabling the DRM logs and user should see whether Seamless DRRS is supported or not. v2: Daniel's review comments Modified downclock deduction based on intel_find_panel_downclock v3: Chris's review comments Moved edp_downclock_avail and edp_downclock to intel_panel v4: Jani's review comments. Changed name of the enum edp_panel_type to drrs_support type. Change is_drrs_supported to drrs_support of type enum drrs_support_type. v5: Incorporated Jani's review comments Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7 and above. v6: Incorporated Chris's review comments. Changed initialize to init in intel_drrs_initialize v7: Incorporated Jani's review comments. Removed edp_downclock and edp_downclock_avail. Return NULL explicitly. Make drrs_state and unnamed struct. Move Gen based check inside drrs_init. v8: Made changes to track PSR enable/disable throughout system use (instead of just in the init sequence) for disabling/enabling DRRS. Jani's review comments. v9: PSR tracking will be done as part of idleness detection patch. Removed PSR state tracker in i915_drrs. Jani's review comments. v10: Added log for DRRS not supported in drrs_init v11: Modification in drrs_init. suggested by Jani Signed-off-by: Pradeep Bhat Signed-off-by: Vandana Kannan Cc: Jani Nikula Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 44 +++++++++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_drv.h | 16 +++++++++++++++ 2 files changed, 59 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index e48d47ced57b..517a8cc27bec 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -3632,6 +3632,42 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, I915_READ(pp_div_reg)); } +static struct drm_display_mode * +intel_dp_drrs_init(struct intel_digital_port *intel_dig_port, + struct intel_connector *intel_connector, + struct drm_display_mode *fixed_mode) +{ + struct drm_connector *connector = &intel_connector->base; + struct intel_dp *intel_dp = &intel_dig_port->dp; + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_display_mode *downclock_mode = NULL; + + if (INTEL_INFO(dev)->gen <= 6) { + DRM_DEBUG_KMS("DRRS supported for Gen7 and above\n"); + return NULL; + } + + if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) { + DRM_INFO("VBT doesn't support DRRS\n"); + return NULL; + } + + downclock_mode = intel_find_panel_downclock + (dev, fixed_mode, connector); + + if (!downclock_mode) { + DRM_INFO("DRRS not supported\n"); + return NULL; + } + + intel_dp->drrs_state.type = dev_priv->vbt.drrs_type; + + intel_dp->drrs_state.refresh_rate_type = DRRS_HIGH_RR; + DRM_INFO("seamless DRRS supported for eDP panel.\n"); + return downclock_mode; +} + static bool intel_edp_init_connector(struct intel_dp *intel_dp, struct intel_connector *intel_connector, struct edp_power_seq *power_seq) @@ -3641,10 +3677,13 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *fixed_mode = NULL; + struct drm_display_mode *downclock_mode = NULL; bool has_dpcd; struct drm_display_mode *scan; struct edid *edid; + intel_dp->drrs_state.type = DRRS_NOT_SUPPORTED; + if (!is_edp(intel_dp)) return true; @@ -3687,6 +3726,9 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, list_for_each_entry(scan, &connector->probed_modes, head) { if ((scan->type & DRM_MODE_TYPE_PREFERRED)) { fixed_mode = drm_mode_duplicate(dev, scan); + downclock_mode = intel_dp_drrs_init( + intel_dig_port, + intel_connector, fixed_mode); break; } } @@ -3700,7 +3742,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, } mutex_unlock(&dev->mode_config.mutex); - intel_panel_init(&intel_connector->panel, fixed_mode, NULL); + intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode); intel_panel_setup_backlight(connector); return true; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 6b512607b2f5..41038d9b434f 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -485,6 +485,17 @@ struct intel_hdmi { #define DP_MAX_DOWNSTREAM_PORTS 0x10 +/** + * HIGH_RR is the highest eDP panel refresh rate read from EDID + * LOW_RR is the lowest eDP panel refresh rate found from EDID + * parsing for same resolution. + */ +enum edp_drrs_refresh_rate_type { + DRRS_HIGH_RR, + DRRS_LOW_RR, + DRRS_MAX_RR, /* RR count */ +}; + struct intel_dp { uint32_t output_reg; uint32_t aux_ch_ctl_reg; @@ -523,6 +534,11 @@ struct intel_dp { bool has_aux_irq, int send_bytes, uint32_t aux_clock_divider); + struct { + enum drrs_support_type type; + enum edp_drrs_refresh_rate_type refresh_rate_type; + } drrs_state; + }; struct intel_digital_port { -- cgit v1.2.3 From 439d7ac0879f9fd4c56f212e03477f358133c56c Mon Sep 17 00:00:00 2001 From: Pradeep Bhat Date: Sat, 5 Apr 2014 12:13:28 +0530 Subject: drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat Signed-off-by: Vandana Kannan Cc: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 5 ++ drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_dp.c | 110 +++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 6 ++- 4 files changed, 121 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d0d8e6d6051c..761fc53e6044 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -633,6 +633,10 @@ struct i915_fbc { } no_fbc_reason; }; +struct i915_drrs { + struct intel_connector *connector; +}; + struct i915_psr { bool sink_support; bool source_ok; @@ -1324,6 +1328,7 @@ struct drm_i915_private { struct timer_list hotplug_reenable_timer; struct i915_fbc fbc; + struct i915_drrs drrs; struct intel_opregion opregion; struct intel_vbt_data vbt; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 46ea2332e45c..8f845556503e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3357,6 +3357,7 @@ enum punit_power_well { #define PIPECONF_INTERLACED_DBL_ILK (4 << 21) /* ilk/snb only */ #define PIPECONF_PFIT_PF_INTERLACED_DBL_ILK (5 << 21) /* ilk/snb only */ #define PIPECONF_INTERLACE_MODE_MASK (7 << 21) +#define PIPECONF_EDP_RR_MODE_SWITCH (1 << 20) #define PIPECONF_CXSR_DOWNCLOCK (1<<16) #define PIPECONF_COLOR_RANGE_SELECT (1 << 13) #define PIPECONF_BPC_MASK (0x7 << 5) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 517a8cc27bec..b50b170dc2e8 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -737,6 +737,20 @@ intel_dp_set_clock(struct intel_encoder *encoder, } } +static void +intel_dp_set_m2_n2(struct intel_crtc *crtc, struct intel_link_m_n *m_n) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum transcoder transcoder = crtc->config.cpu_transcoder; + + I915_WRITE(PIPE_DATA_M2(transcoder), + TU_SIZE(m_n->tu) | m_n->gmch_m); + I915_WRITE(PIPE_DATA_N2(transcoder), m_n->gmch_n); + I915_WRITE(PIPE_LINK_M2(transcoder), m_n->link_m); + I915_WRITE(PIPE_LINK_N2(transcoder), m_n->link_n); +} + bool intel_dp_compute_config(struct intel_encoder *encoder, struct intel_crtc_config *pipe_config) @@ -841,6 +855,14 @@ found: pipe_config->port_clock, &pipe_config->dp_m_n); + if (intel_connector->panel.downclock_mode != NULL && + intel_dp->drrs_state.type == SEAMLESS_DRRS_SUPPORT) { + intel_link_compute_m_n(bpp, lane_count, + intel_connector->panel.downclock_mode->clock, + pipe_config->port_clock, + &pipe_config->dp_m2_n2); + } + intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw); return true; @@ -3632,6 +3654,90 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, I915_READ(pp_div_reg)); } +void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_encoder *encoder; + struct intel_dp *intel_dp = NULL; + struct intel_crtc_config *config = NULL; + struct intel_crtc *intel_crtc = NULL; + struct intel_connector *intel_connector = dev_priv->drrs.connector; + u32 reg, val; + enum edp_drrs_refresh_rate_type index = DRRS_HIGH_RR; + + if (refresh_rate <= 0) { + DRM_DEBUG_KMS("Refresh rate should be positive non-zero.\n"); + return; + } + + if (intel_connector == NULL) { + DRM_DEBUG_KMS("DRRS supported for eDP only.\n"); + return; + } + + if (INTEL_INFO(dev)->gen < 8 && intel_edp_is_psr_enabled(dev)) { + DRM_DEBUG_KMS("DRRS is disabled as PSR is enabled\n"); + return; + } + + encoder = intel_attached_encoder(&intel_connector->base); + intel_dp = enc_to_intel_dp(&encoder->base); + intel_crtc = encoder->new_crtc; + + if (!intel_crtc) { + DRM_DEBUG_KMS("DRRS: intel_crtc not initialized\n"); + return; + } + + config = &intel_crtc->config; + + if (intel_dp->drrs_state.type < SEAMLESS_DRRS_SUPPORT) { + DRM_DEBUG_KMS("Only Seamless DRRS supported.\n"); + return; + } + + if (intel_connector->panel.downclock_mode->vrefresh == refresh_rate) + index = DRRS_LOW_RR; + + if (index == intel_dp->drrs_state.refresh_rate_type) { + DRM_DEBUG_KMS( + "DRRS requested for previously set RR...ignoring\n"); + return; + } + + if (!intel_crtc->active) { + DRM_DEBUG_KMS("eDP encoder disabled. CRTC not Active\n"); + return; + } + + if (INTEL_INFO(dev)->gen > 6 && INTEL_INFO(dev)->gen < 8) { + reg = PIPECONF(intel_crtc->config.cpu_transcoder); + val = I915_READ(reg); + if (index > DRRS_HIGH_RR) { + val |= PIPECONF_EDP_RR_MODE_SWITCH; + intel_dp_set_m2_n2(intel_crtc, &config->dp_m2_n2); + } else { + val &= ~PIPECONF_EDP_RR_MODE_SWITCH; + } + I915_WRITE(reg, val); + } + + /* + * mutex taken to ensure that there is no race between differnt + * drrs calls trying to update refresh rate. This scenario may occur + * in future when idleness detection based DRRS in kernel and + * possible calls from user space to set differnt RR are made. + */ + + mutex_lock(&intel_dp->drrs_state.mutex); + + intel_dp->drrs_state.refresh_rate_type = index; + + mutex_unlock(&intel_dp->drrs_state.mutex); + + DRM_DEBUG_KMS("eDP Refresh Rate set to : %dHz\n", refresh_rate); +} + static struct drm_display_mode * intel_dp_drrs_init(struct intel_digital_port *intel_dig_port, struct intel_connector *intel_connector, @@ -3661,6 +3767,10 @@ intel_dp_drrs_init(struct intel_digital_port *intel_dig_port, return NULL; } + dev_priv->drrs.connector = intel_connector; + + mutex_init(&intel_dp->drrs_state.mutex); + intel_dp->drrs_state.type = dev_priv->vbt.drrs_type; intel_dp->drrs_state.refresh_rate_type = DRRS_HIGH_RR; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 41038d9b434f..c551472b892e 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -305,6 +305,9 @@ struct intel_crtc_config { int pipe_bpp; struct intel_link_m_n dp_m_n; + /* m2_n2 for eDP downclock */ + struct intel_link_m_n dp_m2_n2; + /* * Frequence the dpll for the port should run at. Differs from the * adjusted dotclock e.g. for DP or 12bpc hdmi mode. This is also @@ -537,6 +540,7 @@ struct intel_dp { struct { enum drrs_support_type type; enum edp_drrs_refresh_rate_type refresh_rate_type; + struct mutex mutex; } drrs_state; }; @@ -792,7 +796,7 @@ void intel_edp_panel_off(struct intel_dp *intel_dp); void intel_edp_psr_enable(struct intel_dp *intel_dp); void intel_edp_psr_disable(struct intel_dp *intel_dp); void intel_edp_psr_update(struct drm_device *dev); - +void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate); /* intel_dsi.c */ bool intel_dsi_init(struct drm_device *dev); -- cgit v1.2.3 From 23d0b13036d14257ae4d226209cd7845f25af8e0 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Thu, 10 Apr 2014 14:32:41 -0700 Subject: drm/i915/bdw: Add 42ms delay for IPS disable This is a requirement added to the spec. This patch will prevent persistent corruption on the display. v2: Make the wait before the vblank wait. (Art) Try to finish early by polling the register s/present/prevent (Chris) Cc: Art Runyan Signed-off-by: Ben Widawsky [danvet: Upgrade debug output to ERROR.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 51b3603d5ed7..209fbbe64161 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3583,10 +3583,13 @@ void hsw_disable_ips(struct intel_crtc *crtc) return; assert_plane_enabled(dev_priv, crtc->plane); - if (IS_BROADWELL(crtc->base.dev)) { + if (IS_BROADWELL(dev)) { mutex_lock(&dev_priv->rps.hw_lock); WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0)); mutex_unlock(&dev_priv->rps.hw_lock); + /* wait for pcode to finish disabling IPS, which may take up to 42ms */ + if (wait_for((I915_READ(IPS_CTL) & IPS_ENABLE) == 0, 42)) + DRM_ERROR("Timed out waiting for IPS disable\n"); } else { I915_WRITE(IPS_CTL, 0); POSTING_READ(IPS_CTL); -- cgit v1.2.3 From 773875bfb6737982903c42d1ee88cf60af80089c Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 27 Jan 2014 10:00:30 +0100 Subject: drm/i915: Don't set the 8to6 dither flag when not scaling Apparently we really only need this when the pfit is enabled, at least I couldn't dicern any difference here. Furthermore the hacks we have to reconstruct this bit is a bit glaring, and probably only works because we can't move the lvds port to any other pipe than pipe B on gen2/3. So let's just rip this out. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77137 (the LVDS WARNING log, not the main "VGA can't be turned on" issue). Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_lvds.c | 7 ------- drivers/gpu/drm/i915/intel_panel.c | 8 ++++---- 2 files changed, 4 insertions(+), 11 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f1ecf916474a..1b1541dfb440 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -111,13 +111,6 @@ static void intel_lvds_get_config(struct intel_encoder *encoder, pipe_config->adjusted_mode.flags |= flags; - /* gen2/3 store dither state in pfit control, needs to match */ - if (INTEL_INFO(dev)->gen < 4) { - tmp = I915_READ(PFIT_CONTROL); - - pipe_config->gmch_pfit.control |= tmp & PANEL_8TO6_DITHER_ENABLE; - } - dotclock = pipe_config->port_clock; if (HAS_PCH_SPLIT(dev_priv->dev)) diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index cb058408c70e..a953b081ee38 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -308,16 +308,16 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc, pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) | PFIT_FILTER_FUZZY); + /* Make sure pre-965 set dither correctly for 18bpp panels. */ + if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18) + pfit_control |= PANEL_8TO6_DITHER_ENABLE; + out: if ((pfit_control & PFIT_ENABLE) == 0) { pfit_control = 0; pfit_pgm_ratios = 0; } - /* Make sure pre-965 set dither correctly for 18bpp panels. */ - if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18) - pfit_control |= PANEL_8TO6_DITHER_ENABLE; - pipe_config->gmch_pfit.control = pfit_control; pipe_config->gmch_pfit.pgm_ratios = pfit_pgm_ratios; pipe_config->gmch_pfit.lvds_border_bits = border; -- cgit v1.2.3 From d3b542fcfc72d7724585e3fd2c5e75351bc3df47 Mon Sep 17 00:00:00 2001 From: Shobhit Kumar Date: Mon, 14 Apr 2014 11:00:34 +0530 Subject: drm/i915: Add parsing support for new MIPI blocks in VBT The parser extracts the config block(#52) and sequence(#53) data and store in private data structures. v2: Address review comments by Jani - adjust code for the structure changes for bdb_mipi_config - add boundry and buffer overflow checks as suggested - use kmemdup instead of kmalloc and memcpy v3: More strict check while parsing VBT - Ensure that at anytime we do not go beyond sequence block while parsing - On unknown element fail the whole parsing v4: Style changes and spell check mostly as suggested by Jani Signed-off-by: Shobhit Kumar Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 6 ++ drivers/gpu/drm/i915/intel_bios.c | 204 +++++++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_bios.h | 31 ++++++ 3 files changed, 236 insertions(+), 5 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 761fc53e6044..92c30950c2b2 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1169,6 +1169,12 @@ struct intel_vbt_data { /* MIPI DSI */ struct { u16 panel_id; + struct mipi_config *config; + struct mipi_pps_data *pps; + u8 seq_version; + u32 size; + u8 *data; + u8 *sequence[MIPI_SEQ_MAX]; } dsi; int crt_ddc_pin; diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 9b986775c4b0..f491e363e84d 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -626,19 +626,213 @@ parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb) } } +static u8 *goto_next_sequence(u8 *data, int *size) +{ + u16 len; + int tmp = *size; + + if (--tmp < 0) + return NULL; + + /* goto first element */ + data++; + while (1) { + switch (*data) { + case MIPI_SEQ_ELEM_SEND_PKT: + /* + * skip by this element payload size + * skip elem id, command flag and data type + */ + if ((tmp = tmp - 5) < 0) + return NULL; + + data += 3; + len = *((u16 *)data); + + if ((tmp = tmp - len) < 0) + return NULL; + + /* skip by len */ + data = data + 2 + len; + break; + case MIPI_SEQ_ELEM_DELAY: + /* skip by elem id, and delay is 4 bytes */ + if ((tmp = tmp - 5) < 0) + return NULL; + + data += 5; + break; + case MIPI_SEQ_ELEM_GPIO: + if ((tmp = tmp - 3) < 0) + return NULL; + + data += 3; + break; + default: + DRM_ERROR("Unknown element\n"); + return NULL; + } + + /* end of sequence ? */ + if (*data == 0) + break; + } + + /* goto next sequence or end of block byte */ + if (--tmp < 0) + return NULL; + + data++; + + /* update amount of data left for the sequence block to be parsed */ + *size = tmp; + return data; +} + static void parse_mipi(struct drm_i915_private *dev_priv, struct bdb_header *bdb) { - struct bdb_mipi *mipi; + struct bdb_mipi_config *start; + struct bdb_mipi_sequence *sequence; + struct mipi_config *config; + struct mipi_pps_data *pps; + u8 *data, *seq_data; + int i, panel_id, seq_size; + u16 block_size; + + /* Initialize this to undefined indicating no generic MIPI support */ + dev_priv->vbt.dsi.panel_id = MIPI_DSI_UNDEFINED_PANEL_ID; + + /* Block #40 is already parsed and panel_fixed_mode is + * stored in dev_priv->lfp_lvds_vbt_mode + * resuse this when needed + */ - mipi = find_section(bdb, BDB_MIPI_CONFIG); - if (!mipi) { - DRM_DEBUG_KMS("No MIPI BDB found"); + /* Parse #52 for panel index used from panel_type already + * parsed + */ + start = find_section(bdb, BDB_MIPI_CONFIG); + if (!start) { + DRM_DEBUG_KMS("No MIPI config BDB found"); return; } - /* XXX: add more info */ + DRM_DEBUG_DRIVER("Found MIPI Config block, panel index = %d\n", + panel_type); + + /* + * get hold of the correct configuration block and pps data as per + * the panel_type as index + */ + config = &start->config[panel_type]; + pps = &start->pps[panel_type]; + + /* store as of now full data. Trim when we realise all is not needed */ + dev_priv->vbt.dsi.config = kmemdup(config, sizeof(struct mipi_config), GFP_KERNEL); + if (!dev_priv->vbt.dsi.config) + return; + + dev_priv->vbt.dsi.pps = kmemdup(pps, sizeof(struct mipi_pps_data), GFP_KERNEL); + if (!dev_priv->vbt.dsi.pps) { + kfree(dev_priv->vbt.dsi.config); + return; + } + + /* We have mandatory mipi config blocks. Initialize as generic panel */ dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID; + + /* Check if we have sequence block as well */ + sequence = find_section(bdb, BDB_MIPI_SEQUENCE); + if (!sequence) { + DRM_DEBUG_KMS("No MIPI Sequence found, parsing complete\n"); + return; + } + + DRM_DEBUG_DRIVER("Found MIPI sequence block\n"); + + block_size = get_blocksize(sequence); + + /* + * parse the sequence block for individual sequences + */ + dev_priv->vbt.dsi.seq_version = sequence->version; + + seq_data = &sequence->data[0]; + + /* + * sequence block is variable length and hence we need to parse and + * get the sequence data for specific panel id + */ + for (i = 0; i < MAX_MIPI_CONFIGURATIONS; i++) { + panel_id = *seq_data; + seq_size = *((u16 *) (seq_data + 1)); + if (panel_id == panel_type) + break; + + /* skip the sequence including seq header of 3 bytes */ + seq_data = seq_data + 3 + seq_size; + if ((seq_data - &sequence->data[0]) > block_size) { + DRM_ERROR("Sequence start is beyond sequence block size, corrupted sequence block\n"); + return; + } + } + + if (i == MAX_MIPI_CONFIGURATIONS) { + DRM_ERROR("Sequence block detected but no valid configuration\n"); + return; + } + + /* check if found sequence is completely within the sequence block + * just being paranoid */ + if (seq_size > block_size) { + DRM_ERROR("Corrupted sequence/size, bailing out\n"); + return; + } + + /* skip the panel id(1 byte) and seq size(2 bytes) */ + dev_priv->vbt.dsi.data = kmemdup(seq_data + 3, seq_size, GFP_KERNEL); + if (!dev_priv->vbt.dsi.data) + return; + + /* + * loop into the sequence data and split into multiple sequneces + * There are only 5 types of sequences as of now + */ + data = dev_priv->vbt.dsi.data; + dev_priv->vbt.dsi.size = seq_size; + + /* two consecutive 0x00 indicate end of all sequences */ + while (1) { + int seq_id = *data; + if (MIPI_SEQ_MAX > seq_id && seq_id > MIPI_SEQ_UNDEFINED) { + dev_priv->vbt.dsi.sequence[seq_id] = data; + DRM_DEBUG_DRIVER("Found mipi sequence - %d\n", seq_id); + } else { + DRM_ERROR("undefined sequence\n"); + goto err; + } + + /* partial parsing to skip elements */ + data = goto_next_sequence(data, &seq_size); + + if (data == NULL) { + DRM_ERROR("Sequence elements going beyond block itself. Sequence block parsing failed\n"); + goto err; + } + + if (*data == 0) + break; /* end of sequence reached */ + } + + DRM_DEBUG_DRIVER("MIPI related vbt parsing complete\n"); + return; +err: + kfree(dev_priv->vbt.dsi.data); + dev_priv->vbt.dsi.data = NULL; + + /* error during parsing so set all pointers to null + * because of partial parsing */ + memset(dev_priv->vbt.dsi.sequence, 0, MIPI_SEQ_MAX); } static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port, diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h index d02e5f93c362..15ae3b505284 100644 --- a/drivers/gpu/drm/i915/intel_bios.h +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -896,4 +896,35 @@ struct bdb_mipi_sequence { u8 data[0]; }; +/* MIPI Sequnece Block definitions */ +enum mipi_seq { + MIPI_SEQ_UNDEFINED = 0, + MIPI_SEQ_ASSERT_RESET, + MIPI_SEQ_INIT_OTP, + MIPI_SEQ_DISPLAY_ON, + MIPI_SEQ_DISPLAY_OFF, + MIPI_SEQ_DEASSERT_RESET, + MIPI_SEQ_MAX +}; + +enum mipi_seq_element { + MIPI_SEQ_ELEM_UNDEFINED = 0, + MIPI_SEQ_ELEM_SEND_PKT, + MIPI_SEQ_ELEM_DELAY, + MIPI_SEQ_ELEM_GPIO, + MIPI_SEQ_ELEM_STATUS, + MIPI_SEQ_ELEM_MAX +}; + +enum mipi_gpio_pin_index { + MIPI_GPIO_UNDEFINED = 0, + MIPI_GPIO_PANEL_ENABLE, + MIPI_GPIO_BL_ENABLE, + MIPI_GPIO_PWM_ENABLE, + MIPI_GPIO_RESET_N, + MIPI_GPIO_PWR_DOWN_R, + MIPI_GPIO_STDBY_RST_N, + MIPI_GPIO_MAX +}; + #endif /* _I830_BIOS_H_ */ -- cgit v1.2.3 From 4d43e9bd1f38a4e42cea4c8527df191a9299122b Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Fri, 11 Apr 2014 19:07:44 +0200 Subject: drm/i915/SDVO: For sysfs link put directory and target in correct order When linking the i2c sysfs file into the connector's directory pass directory and link target in the right order. This code was introduced with: commit 931c1c26983b4f84e33b78579fc8d57e4a14c6b4 Author: Imre Deak Date: Tue Feb 11 17:12:51 2014 +0200 drm/i915: sdvo: add i2c sysfs symlink to the connector's directory This is the same what we do for DP connectors, so make things more consistent. Signed-off-by: Egbert Eich Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index d27155adf5db..46be00d66df3 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2424,8 +2424,8 @@ intel_sdvo_connector_init(struct intel_sdvo_connector *connector, if (ret < 0) goto err1; - ret = sysfs_create_link(&encoder->ddc.dev.kobj, - &drm_connector->kdev->kobj, + ret = sysfs_create_link(&drm_connector->kdev->kobj, + &encoder->ddc.dev.kobj, encoder->ddc.dev.kobj.name); if (ret < 0) goto err2; -- cgit v1.2.3 From b0256cdcb4c3aa1fe141d30cbf232872282cbb64 Mon Sep 17 00:00:00 2001 From: Shobhit Kumar Date: Tue, 15 Apr 2014 13:54:07 +0530 Subject: drm/i915: Code cleanup patch to fix checkpatch errors This cleans up the checkpatch errors for the merged commit - commit d3b542fcfc72d7724585e3fd2c5e75351bc3df47 Author: Shobhit Kumar Date: Mon Apr 14 11:00:34 2014 +0530 drm/i915: Add parsing support for new MIPI blocks in VBT Signed-off-by: Shobhit Kumar Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_bios.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index f491e363e84d..054dbe7fdf9b 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -643,13 +643,15 @@ static u8 *goto_next_sequence(u8 *data, int *size) * skip by this element payload size * skip elem id, command flag and data type */ - if ((tmp = tmp - 5) < 0) + tmp -= 5; + if (tmp < 0) return NULL; data += 3; len = *((u16 *)data); - if ((tmp = tmp - len) < 0) + tmp -= len; + if (tmp < 0) return NULL; /* skip by len */ @@ -657,13 +659,15 @@ static u8 *goto_next_sequence(u8 *data, int *size) break; case MIPI_SEQ_ELEM_DELAY: /* skip by elem id, and delay is 4 bytes */ - if ((tmp = tmp - 5) < 0) + tmp -= 5; + if (tmp < 0) return NULL; data += 5; break; case MIPI_SEQ_ELEM_GPIO: - if ((tmp = tmp - 3) < 0) + tmp -= 3; + if (tmp < 0) return NULL; data += 3; -- cgit v1.2.3 From be6a6f8ec707f2e446e445ad4b8cc93cc85d5d54 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 15 Apr 2014 18:41:22 +0200 Subject: drm/i915: Don't vblank wait on ilk-ivb after pipe enable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Like on hsw/bdw the pipe isn't actually running yet at this point. This holds for both pch ports and the cpu edp port according to my testing on ilk, snb and ivb. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77297 Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 209fbbe64161..0ef2f8d8d8df 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1804,16 +1804,6 @@ static void intel_enable_pipe(struct intel_crtc *crtc) I915_WRITE(reg, val | PIPECONF_ENABLE); POSTING_READ(reg); - - /* - * There's no guarantee the pipe will really start running now. It - * depends on the Gen, the output type and the relative order between - * pipe and plane enabling. Avoid waiting on HSW+ since it's not - * necessary. - * TODO: audit the previous gens. - */ - if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev)) - intel_wait_for_vblank(dev_priv->dev, pipe); } /** @@ -4369,7 +4359,9 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc) intel_update_watermarks(crtc); intel_enable_pipe(intel_crtc); + intel_wait_for_vblank(dev_priv->dev, pipe); intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); + intel_enable_primary_hw_plane(dev_priv, plane, pipe); intel_enable_planes(crtc); intel_crtc_update_cursor(crtc, true); @@ -4408,7 +4400,9 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc) intel_update_watermarks(crtc); intel_enable_pipe(intel_crtc); + intel_wait_for_vblank(dev_priv->dev, pipe); intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); + intel_enable_primary_hw_plane(dev_priv, plane, pipe); intel_enable_planes(crtc); /* The fixup needs to happen before cursor is enabled */ -- cgit v1.2.3 From a5c4d7bc187bd13bc11ac06bb4ea3a0d4001aa4d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 7 Mar 2014 18:32:13 +0200 Subject: drm/i915: Disable/enable planes as the first/last thing during modeset on ILK+ MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We already do this for HSW, but doing it makes sense for everything else as well. Extend it for ILK/SNB/IVB since that's where the new watermark code is used. Signed-off-by: Ville Syrjälä Reviewed-by: Paulo Zanoni Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77297 [danvet: Resolve conflict since I've plucked this out of the middle of Ville's series.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 109 +++++++++++++++-------------------- 1 file changed, 46 insertions(+), 63 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0ef2f8d8d8df..f32c7bccbec7 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3636,6 +3636,46 @@ static void intel_crtc_load_lut(struct drm_crtc *crtc) hsw_enable_ips(intel_crtc); } +static void ilk_crtc_enable_planes(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int plane = intel_crtc->plane; + + intel_enable_primary_hw_plane(dev_priv, plane, pipe); + intel_enable_planes(crtc); + intel_crtc_update_cursor(crtc, true); + + hsw_enable_ips(intel_crtc); + + mutex_lock(&dev->struct_mutex); + intel_update_fbc(dev); + mutex_unlock(&dev->struct_mutex); +} + +static void ilk_crtc_disable_planes(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int plane = intel_crtc->plane; + + intel_crtc_wait_for_pending_flips(crtc); + drm_vblank_off(dev, pipe); + + if (dev_priv->fbc.plane == plane) + intel_disable_fbc(dev); + + hsw_disable_ips(intel_crtc); + + intel_crtc_update_cursor(crtc, false); + intel_disable_planes(crtc); + intel_disable_primary_hw_plane(dev_priv, plane, pipe); +} + static void ironlake_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -3643,7 +3683,6 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_encoder *encoder; int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; WARN_ON(!crtc->enabled); @@ -3679,23 +3718,18 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) intel_update_watermarks(crtc); intel_enable_pipe(intel_crtc); - intel_enable_primary_hw_plane(dev_priv, plane, pipe); - intel_enable_planes(crtc); - intel_crtc_update_cursor(crtc, true); if (intel_crtc->config.has_pch_encoder) ironlake_pch_enable(crtc); - mutex_lock(&dev->struct_mutex); - intel_update_fbc(dev); - mutex_unlock(&dev->struct_mutex); - for_each_encoder_on_crtc(dev, crtc, encoder) encoder->enable(encoder); if (HAS_PCH_CPT(dev)) cpt_verify_modeset(dev, intel_crtc->pipe); + ilk_crtc_enable_planes(crtc); + /* * There seems to be a race in PCH platform hw (at least on some * outputs) where an enabled pipe still completes any pageflip right @@ -3713,47 +3747,6 @@ static bool hsw_crtc_supports_ips(struct intel_crtc *crtc) return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A; } -static void haswell_crtc_enable_planes(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; - - intel_enable_primary_hw_plane(dev_priv, plane, pipe); - intel_enable_planes(crtc); - intel_crtc_update_cursor(crtc, true); - - hsw_enable_ips(intel_crtc); - - mutex_lock(&dev->struct_mutex); - intel_update_fbc(dev); - mutex_unlock(&dev->struct_mutex); -} - -static void haswell_crtc_disable_planes(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; - - intel_crtc_wait_for_pending_flips(crtc); - drm_vblank_off(dev, pipe); - - /* FBC must be disabled before disabling the plane on HSW. */ - if (dev_priv->fbc.plane == plane) - intel_disable_fbc(dev); - - hsw_disable_ips(intel_crtc); - - intel_crtc_update_cursor(crtc, false); - intel_disable_planes(crtc); - intel_disable_primary_hw_plane(dev_priv, plane, pipe); -} - /* * This implements the workaround described in the "notes" section of the mode * set sequence documentation. When going from no pipes or single pipe to @@ -3836,7 +3829,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc) /* If we change the relative order between pipe/planes enabling, we need * to change the workaround. */ haswell_mode_set_planes_workaround(intel_crtc); - haswell_crtc_enable_planes(crtc); + ilk_crtc_enable_planes(crtc); } static void ironlake_pfit_disable(struct intel_crtc *crtc) @@ -3861,26 +3854,16 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_encoder *encoder; int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; u32 reg, temp; - if (!intel_crtc->active) return; + ilk_crtc_disable_planes(crtc); + for_each_encoder_on_crtc(dev, crtc, encoder) encoder->disable(encoder); - intel_crtc_wait_for_pending_flips(crtc); - drm_vblank_off(dev, pipe); - - if (dev_priv->fbc.plane == plane) - intel_disable_fbc(dev); - - intel_crtc_update_cursor(crtc, false); - intel_disable_planes(crtc); - intel_disable_primary_hw_plane(dev_priv, plane, pipe); - if (intel_crtc->config.has_pch_encoder) intel_set_pch_fifo_underrun_reporting(dev, pipe, false); @@ -3939,7 +3922,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc) if (!intel_crtc->active) return; - haswell_crtc_disable_planes(crtc); + ilk_crtc_disable_planes(crtc); for_each_encoder_on_crtc(dev, crtc, encoder) { intel_opregion_notify_encoder(encoder, false); -- cgit v1.2.3 From c79057922ed6c2c6df1214e6ab4414fea1b23db2 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 16 Apr 2014 16:56:09 +0200 Subject: drm/i915: Remove vblank wait from haswell_write_eld MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The pipe is off at that point in time, so a vblank wait is simply a 50ms wait. Caught by Jesse's verbose "make vblank wait timeouts WARN" patch. We've probably had a few versions of this float around already. To document assumptions put a pipe assert into the same place. And also add a posting read. If we ever decide to update the eld and infoframes while the pipe is already on (e.g. for fastboot) then there's lots of work to do. So better properly document all the hidden assumptions. Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f32c7bccbec7..420070b08ac4 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7336,7 +7336,6 @@ static void haswell_write_eld(struct drm_connector *connector, { struct drm_i915_private *dev_priv = connector->dev->dev_private; uint8_t *eld = connector->eld; - struct drm_device *dev = crtc->dev; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); uint32_t eldv; uint32_t i; @@ -7354,9 +7353,9 @@ static void haswell_write_eld(struct drm_connector *connector, tmp = I915_READ(aud_cntrl_st2); tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4)); I915_WRITE(aud_cntrl_st2, tmp); + POSTING_READ(aud_cntrl_st2); - /* Wait for 1 vertical blank */ - intel_wait_for_vblank(dev, pipe); + assert_pipe_disabled(dev_priv, to_intel_crtc(crtc)->pipe); /* Set ELD valid state */ tmp = I915_READ(aud_cntrl_st2); -- cgit v1.2.3