From a58555359a9f870543aaddef277c3396159895ce Mon Sep 17 00:00:00 2001 From: Fangzhi Zuo Date: Mon, 23 Oct 2023 13:57:32 -0400 Subject: drm/amd/display: Fix DSC not Enabled on Direct MST Sink [WHY & HOW] For the scenario when a dsc capable MST sink device is directly connected, it needs to use max dsc compression as the link bw constraint. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Roman Li Acked-by: Alex Hung Signed-off-by: Fangzhi Zuo Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 29 +++++++++++----------- 1 file changed, 14 insertions(+), 15 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index d3b13d362eda..11da0eebee6c 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -1604,31 +1604,31 @@ enum dc_status dm_dp_mst_is_port_support_mode( unsigned int upper_link_bw_in_kbps = 0, down_link_bw_in_kbps = 0; unsigned int max_compressed_bw_in_kbps = 0; struct dc_dsc_bw_range bw_range = {0}; - struct drm_dp_mst_topology_mgr *mst_mgr; + uint16_t full_pbn = aconnector->mst_output_port->full_pbn; /* - * check if the mode could be supported if DSC pass-through is supported - * AND check if there enough bandwidth available to support the mode - * with DSC enabled. + * Consider the case with the depth of the mst topology tree is equal or less than 2 + * A. When dsc bitstream can be transmitted along the entire path + * 1. dsc is possible between source and branch/leaf device (common dsc params is possible), AND + * 2. dsc passthrough supported at MST branch, or + * 3. dsc decoding supported at leaf MST device + * Use maximum dsc compression as bw constraint + * B. When dsc bitstream cannot be transmitted along the entire path + * Use native bw as bw constraint */ if (is_dsc_common_config_possible(stream, &bw_range) && - aconnector->mst_output_port->passthrough_aux) { - mst_mgr = aconnector->mst_output_port->mgr; - mutex_lock(&mst_mgr->lock); - + (aconnector->mst_output_port->passthrough_aux || + aconnector->dsc_aux == &aconnector->mst_output_port->aux)) { cur_link_settings = stream->link->verified_link_cap; upper_link_bw_in_kbps = dc_link_bandwidth_kbps(aconnector->dc_link, - &cur_link_settings - ); - down_link_bw_in_kbps = kbps_from_pbn(aconnector->mst_output_port->full_pbn); + &cur_link_settings); + down_link_bw_in_kbps = kbps_from_pbn(full_pbn); /* pick the bottleneck */ end_to_end_bw_in_kbps = min(upper_link_bw_in_kbps, down_link_bw_in_kbps); - mutex_unlock(&mst_mgr->lock); - /* * use the maximum dsc compression bandwidth as the required * bandwidth for the mode @@ -1643,8 +1643,7 @@ enum dc_status dm_dp_mst_is_port_support_mode( /* check if mode could be supported within full_pbn */ bpp = convert_dc_color_depth_into_bpc(stream->timing.display_color_depth) * 3; pbn = drm_dp_calc_pbn_mode(stream->timing.pix_clk_100hz / 10, bpp, false); - - if (pbn > aconnector->mst_output_port->full_pbn) + if (pbn > full_pbn) return DC_FAIL_BANDWIDTH_VALIDATE; } -- cgit v1.2.3