From 8808a793f052c0a67426a24b961402fa20e92814 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Fri, 23 May 2008 13:04:25 -0700 Subject: ibmaem: new driver for power/energy/temp meters in IBM System X hardware This driver reads IBM Active Energy Manager energy/temperature/power sensors on IBM System X hardware. [akpm@linux-foundation.org: fix printk warnings] Signed-off-by: Darrick J. Wong Cc: "Mark M. Hoffman" Cc: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/Kconfig | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers/hwmon/Kconfig') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 4dc76bc45c9d..00ff53348491 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -330,6 +330,20 @@ config SENSORS_CORETEMP sensor inside your CPU. Supported all are all known variants of Intel Core family. +config SENSORS_IBMAEM + tristate "IBM Active Energy Manager temperature/power sensors and control" + select IPMI_SI + depends on IPMI_HANDLER + help + If you say yes here you get support for the temperature and + power sensors and capping hardware in various IBM System X + servers that support Active Energy Manager. This includes + the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, + and certain HS2x/LS2x/QS2x blades. + + This driver can also be built as a module. If so, the module + will be called ibmaem. + config SENSORS_IBMPEX tristate "IBM PowerExecutive temperature/power sensors" select IPMI_SI -- cgit v1.2.3