From 7611da865c1060b2a7c87a15de663a59035747f8 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 18 Aug 2016 15:41:58 -0700 Subject: irqchip/gicv3-its: Disable the ITS before initializing it When starting a kexec/kdump kernel, the GIC ITS will already have been enabled. According to the ARM Generic Interrupt Controller Architecture Specification (GIC architecture Version 3.0 and version 4.0), writing to GITS_BASER or GITS_CBASER is "UNPREDICTABLE" when the ITS is enabled. On Cavium Thunder systems, this prevents the ITS from being initializing in the kexec/kdump kernel, resulting in failure to register/enable interrupts for all devices. The fix is to disable the ITS if it is not already in the disabled state. This allows the ITS to be properly initialized and then re-enabled in the kexec/kdump kernel. Acked-by: Marc Zyngier Signed-off-by: David Daney Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-gic-v3-its.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/irqchip') diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 7ceaba81efb4..36b9c28a5c91 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -1545,7 +1545,12 @@ static int its_force_quiescent(void __iomem *base) u32 val; val = readl_relaxed(base + GITS_CTLR); - if (val & GITS_CTLR_QUIESCENT) + /* + * GIC architecture specification requires the ITS to be both + * disabled and quiescent for writes to GITS_BASER or + * GITS_CBASER to not have UNPREDICTABLE results. + */ + if ((val & GITS_CTLR_QUIESCENT) && !(val & GITS_CTLR_ENABLE)) return 0; /* Disable the generation of all interrupts to this ITS */ -- cgit v1.2.3