From fec528b77f9be3e7ebb8d7c25888b0cf9fb8e8d6 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 3 Jul 2011 21:05:06 -0300
Subject: [media] Add initial support for Terratec H5

Not working yet. There are some fixes at the DRX-K that are needed
for it to work.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-cards.c | 37 +++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

(limited to 'drivers/media/video/em28xx/em28xx-cards.c')

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index c892a1e4ad85..cc0b9a387917 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -300,6 +300,23 @@ static struct em28xx_reg_seq pctv_290e[] = {
 	{-1,			-1,	-1,		-1},
 };
 
+#if 0
+static struct em28xx_reg_seq terratec_h5_gpio[] = {
+	{EM28XX_R08_GPIO,	0xff,	0xff,	10},
+	{EM2874_R80_GPIO,	0xf6,	0xff,	100},
+	{EM2874_R80_GPIO,	0xf2,	0xff,	50},
+	{EM2874_R80_GPIO,	0xf6,	0xff,	50},
+	{ -1,			-1,	-1,	-1},
+};
+
+static struct em28xx_reg_seq terratec_h5_digital[] = {
+	{EM2874_R80_GPIO,	0xf6,	0xff,	10},
+	{EM2874_R80_GPIO,	0xe6,	0xff,	100},
+	{EM2874_R80_GPIO,	0xa6,	0xff,	10},
+	{ -1,			-1,	-1,	-1},
+};
+#endif
+
 /*
  *  Board definitions
  */
@@ -843,6 +860,19 @@ struct em28xx_board em28xx_boards[] = {
 			.gpio     = terratec_cinergy_USB_XS_FR_analog,
 		} },
 	},
+	[EM2884_BOARD_TERRATEC_H5] = {
+		.name         = "Terratec Cinergy H5",
+		.has_dvb      = 1,
+#if 0
+		.tuner_type   = TUNER_PHILIPS_TDA8290,
+		.tuner_addr   = 0x41,
+		.dvb_gpio     = terratec_h5_digital, /* FIXME: probably wrong */
+		.tuner_gpio   = terratec_h5_gpio,
+#endif
+		.i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
+				EM28XX_I2C_CLK_WAIT_ENABLE |
+				EM28XX_I2C_FREQ_400_KHZ,
+	},
 	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 		.name         = "Hauppauge WinTV HVR 900",
 		.tda9887_conf = TDA9887_PRESENT,
@@ -1855,6 +1885,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
 	{ USB_DEVICE(0x0ccd, 0x0043),
 			.driver_info = EM2870_BOARD_TERRATEC_XS },
+	{ USB_DEVICE(0x0ccd, 0x10a2),
+			.driver_info = EM2884_BOARD_TERRATEC_H5 },
 	{ USB_DEVICE(0x0ccd, 0x0047),
 			.driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
 	{ USB_DEVICE(0x0ccd, 0x0084),
@@ -2840,6 +2872,11 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 			em28xx_info("chip ID is em2882/em2883\n");
 			dev->wait_after_write = 0;
 			break;
+		case CHIP_ID_EM2884:
+			em28xx_info("chip ID is em2884\n");
+			dev->reg_gpio_num = EM2874_R80_GPIO;
+			dev->wait_after_write = 0;
+			break;
 		default:
 			em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
 		}
-- 
cgit v1.2.3