From f10378fff658f61307496e0ae00095041725cf07 Mon Sep 17 00:00:00 2001 From: Markus Lidel Date: Thu, 23 Jun 2005 22:02:16 -0700 Subject: [PATCH] I2O: new sysfs attributes and Adaptec specific block device access and 64-bit DMA support Changes: - Added Bus-OSM which could be used by user space programs to reset a channel on the controller - Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and move those to its own file - Added sysfs attribute for firmware read and write access for I2O controllers - Added special handling of firmware read and write access for Adaptec controllers - Added vendor id and product id as sysfs-attribute to Executive classes - Added automatic notification of LCT change handling to Exec-OSM - Added flushing function to Block-OSM for later barrier implementation - Use PRIVATE messages for Block access on Adaptec controllers, which are faster then BLOCK class access - Cleaned up support for Promise controller - New messages are now detected using the IRQ status register as suggested by the I2O spec - Added i2o_dma_high() and i2o_dma_low() functions - Added facility for SG tablesize calculation when using 32-bit and 64-bit DMA addresses - Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the SG list for 32-bit as well as 64-bit DMA addresses Signed-off-by: Markus Lidel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/message/i2o/bus-osm.c | 164 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 164 insertions(+) create mode 100644 drivers/message/i2o/bus-osm.c (limited to 'drivers/message/i2o/bus-osm.c') diff --git a/drivers/message/i2o/bus-osm.c b/drivers/message/i2o/bus-osm.c new file mode 100644 index 000000000000..d43c35894ae9 --- /dev/null +++ b/drivers/message/i2o/bus-osm.c @@ -0,0 +1,164 @@ +/* + * Bus Adapter OSM + * + * Copyright (C) 2005 Markus Lidel + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Fixes/additions: + * Markus Lidel + * initial version. + */ + +#include +#include + +#define OSM_NAME "bus-osm" +#define OSM_VERSION "$Rev$" +#define OSM_DESCRIPTION "I2O Bus Adapter OSM" + +static struct i2o_driver i2o_bus_driver; + +/* Bus OSM class handling definition */ +static struct i2o_class_id i2o_bus_class_id[] = { + {I2O_CLASS_BUS_ADAPTER}, + {I2O_CLASS_END} +}; + +/** + * i2o_bus_scan - Scan the bus for new devices + * @dev: I2O device of the bus, which should be scanned + * + * Scans the bus dev for new / removed devices. After the scan a new LCT + * will be fetched automatically. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_bus_scan(struct i2o_device *dev) +{ + struct i2o_message __iomem *msg; + u32 m; + + m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_BUS_SCAN << 24 | HOST_TID << 12 | dev->lct_data.tid, + &msg->u.head[1]); + + return i2o_msg_post_wait(dev->iop, m, 60); +}; + +/** + * i2o_bus_store_scan - Scan the I2O Bus Adapter + * @d: device which should be scanned + * + * Returns count. + */ +static ssize_t i2o_bus_store_scan(struct device *d, const char *buf, + size_t count) +{ + struct i2o_device *i2o_dev = to_i2o_device(d); + int rc; + + if ((rc = i2o_bus_scan(i2o_dev))) + osm_warn("bus scan failed %d\n", rc); + + return count; +} + +/* Bus Adapter OSM device attributes */ +static DEVICE_ATTR(scan, S_IWUSR, NULL, i2o_bus_store_scan); + +/** + * i2o_bus_probe - verify if dev is a I2O Bus Adapter device and install it + * @dev: device to verify if it is a I2O Bus Adapter device + * + * Because we want all Bus Adapters always return 0. + * + * Returns 0. + */ +static int i2o_bus_probe(struct device *dev) +{ + struct i2o_device *i2o_dev = to_i2o_device(get_device(dev)); + + device_create_file(dev, &dev_attr_scan); + + osm_info("device added (TID: %03x)\n", i2o_dev->lct_data.tid); + + return 0; +}; + +/** + * i2o_bus_remove - remove the I2O Bus Adapter device from the system again + * @dev: I2O Bus Adapter device which should be removed + * + * Always returns 0. + */ +static int i2o_bus_remove(struct device *dev) +{ + struct i2o_device *i2o_dev = to_i2o_device(dev); + + device_remove_file(dev, &dev_attr_scan); + + put_device(dev); + + osm_info("device removed (TID: %03x)\n", i2o_dev->lct_data.tid); + + return 0; +}; + +/* Bus Adapter OSM driver struct */ +static struct i2o_driver i2o_bus_driver = { + .name = OSM_NAME, + .classes = i2o_bus_class_id, + .driver = { + .probe = i2o_bus_probe, + .remove = i2o_bus_remove, + }, +}; + +/** + * i2o_bus_init - Bus Adapter OSM initialization function + * + * Only register the Bus Adapter OSM in the I2O core. + * + * Returns 0 on success or negative error code on failure. + */ +static int __init i2o_bus_init(void) +{ + int rc; + + printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); + + /* Register Bus Adapter OSM into I2O core */ + rc = i2o_driver_register(&i2o_bus_driver); + if (rc) { + osm_err("Could not register Bus Adapter OSM\n"); + return rc; + } + + return 0; +}; + +/** + * i2o_bus_exit - Bus Adapter OSM exit function + * + * Unregisters Bus Adapter OSM from I2O core. + */ +static void __exit i2o_bus_exit(void) +{ + i2o_driver_unregister(&i2o_bus_driver); +}; + +MODULE_AUTHOR("Markus Lidel "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(OSM_DESCRIPTION); +MODULE_VERSION(OSM_VERSION); + +module_init(i2o_bus_init); +module_exit(i2o_bus_exit); -- cgit v1.2.3