From 64bd9c8135751b561f27edaaffe93d07093f81af Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 11 Oct 2018 15:06:33 -0700 Subject: net: bcmgenet: Poll internal PHY for GENETv5 On GENETv5, there is a hardware issue which prevents the GENET hardware from generating a link UP interrupt when the link is operating at 10Mbits/sec. Since we do not have any way to configure the link detection logic, fallback to polling in that case. Fixes: 421380856d9c ("net: bcmgenet: add support for the GENETv5 hardware") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmmii.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet/broadcom/genet/bcmmii.c') diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 4241ae928d4a..34af5f1569c8 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -321,9 +321,12 @@ int bcmgenet_mii_probe(struct net_device *dev) phydev->advertising = phydev->supported; /* The internal PHY has its link interrupts routed to the - * Ethernet MAC ISRs + * Ethernet MAC ISRs. On GENETv5 there is a hardware issue + * that prevents the signaling of link UP interrupts when + * the link operates at 10Mbps, so fallback to polling for + * those versions of GENET. */ - if (priv->internal_phy) + if (priv->internal_phy && !GENET_IS_V5(priv)) dev->phydev->irq = PHY_IGNORE_INTERRUPT; return 0; -- cgit v1.2.3