From 3e1be7ad2d38c6bd6aeef96df9bd0a7822f4e51c Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Fri, 9 Sep 2016 22:43:12 +0800 Subject: bnx2: Reset device during driver initialization When system enters into kdump kernel because of kernel panic, it won't shutdown devices. On-flight DMA will continue transferring data until device driver initializes. All devices are supposed to reset during driver initialization. And this property is used to fix the kdump failure in system with intel iommu. Other systems with hardware iommu should be similar. Please check commit 091d42e ("iommu/vt-d: Copy translation tables from old kernel") and those commits around. But bnx2 driver doesn't reset device during driver initialization. The device resetting is deferred to net device up stage. This will cause hardware iommu handling failure on bnx2 device. And its resetting relies on firmware. So in this patch move the firmware requesting code to earlier bnx2_init_one(), then next call bnx2_reset_chip to reset device. Signed-off-by: Baoquan He Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 8fc3f3c137f8..505ceaf451e2 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -6356,10 +6356,6 @@ bnx2_open(struct net_device *dev) struct bnx2 *bp = netdev_priv(dev); int rc; - rc = bnx2_request_firmware(bp); - if (rc < 0) - goto out; - netif_carrier_off(dev); bnx2_disable_int(bp); @@ -6428,7 +6424,6 @@ open_err: bnx2_free_irq(bp); bnx2_free_mem(bp); bnx2_del_napi(bp); - bnx2_release_firmware(bp); goto out; } @@ -8575,6 +8570,12 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_drvdata(pdev, dev); + rc = bnx2_request_firmware(bp); + if (rc < 0) + goto error; + + + bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET); memcpy(dev->dev_addr, bp->mac_addr, ETH_ALEN); dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | @@ -8607,6 +8608,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; error: + bnx2_release_firmware(bp); pci_iounmap(pdev, bp->regview); pci_release_regions(pdev); pci_disable_device(pdev); -- cgit v1.2.3 From 2a292822f00f7409fc0bd6b2d09efc5b8e6c9c5d Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 14 Sep 2016 13:09:24 +0200 Subject: net/mlx4_en: fix off by one in error handling If an error occurs in mlx4_init_eq_table the index used in the err_out_unmap label is one too big which results in a panic in mlx4_free_eq. This patch fixes the index in the error path. Signed-off-by: Sebastian Ott Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/eq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index f613977455e0..cf8f8a72a801 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -1305,8 +1305,8 @@ int mlx4_init_eq_table(struct mlx4_dev *dev) return 0; err_out_unmap: - while (i >= 0) - mlx4_free_eq(dev, &priv->eq_table.eq[i--]); + while (i > 0) + mlx4_free_eq(dev, &priv->eq_table.eq[--i]); #ifdef CONFIG_RFS_ACCEL for (i = 1; i <= dev->caps.num_ports; i++) { if (mlx4_priv(dev)->port[i].rmap) { -- cgit v1.2.3 From 7077dc415b113ac17a6696c432bad2d66574e4fb Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 14 Sep 2016 21:29:34 +0800 Subject: net: ethernet: mediatek: fix module loading automatically based on MODULE_DEVICE_TABLE The device table is required to load modules based on modaliases. After adding MODULE_DEVICE_TABLE, below entries for example will be added to modules.alias: alias of:N*T*Cmediatek,mt7623-ethC* mtk_eth_soc Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index d9199151a83e..3743af8f1ded 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1923,6 +1923,7 @@ const struct of_device_id of_mtk_match[] = { { .compatible = "mediatek,mt7623-eth" }, {}, }; +MODULE_DEVICE_TABLE(of, of_mtk_match); static struct platform_driver mtk_driver = { .probe = mtk_probe, -- cgit v1.2.3 From 01afd972a737879c1466a12f696601a2ce91ea84 Mon Sep 17 00:00:00 2001 From: Ivan Mikhaylov Date: Wed, 14 Sep 2016 19:06:44 +0300 Subject: net/ibm/emac: add set mac addr callback add realization for mac address set and remove dummy callback. Signed-off-by: Ivan Mikhaylov Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/emac/core.c | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index 4c9771d57d6e..2dfc60308648 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -980,6 +980,33 @@ static void emac_set_multicast_list(struct net_device *ndev) __emac_set_multicast_list(dev); } +static int emac_set_mac_address(struct net_device *ndev, void *sa) +{ + struct emac_instance *dev = netdev_priv(ndev); + struct sockaddr *addr = sa; + struct emac_regs __iomem *p = dev->emacp; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + mutex_lock(&dev->link_lock); + + memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); + + emac_rx_disable(dev); + emac_tx_disable(dev); + out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]); + out_be32(&p->ialr, (ndev->dev_addr[2] << 24) | + (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) | + ndev->dev_addr[5]); + emac_tx_enable(dev); + emac_rx_enable(dev); + + mutex_unlock(&dev->link_lock); + + return 0; +} + static int emac_resize_rx_ring(struct emac_instance *dev, int new_mtu) { int rx_sync_size = emac_rx_sync_size(new_mtu); @@ -2686,7 +2713,7 @@ static const struct net_device_ops emac_netdev_ops = { .ndo_do_ioctl = emac_ioctl, .ndo_tx_timeout = emac_tx_timeout, .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, + .ndo_set_mac_address = emac_set_mac_address, .ndo_start_xmit = emac_start_xmit, .ndo_change_mtu = eth_change_mtu, }; @@ -2699,7 +2726,7 @@ static const struct net_device_ops emac_gige_netdev_ops = { .ndo_do_ioctl = emac_ioctl, .ndo_tx_timeout = emac_tx_timeout, .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, + .ndo_set_mac_address = emac_set_mac_address, .ndo_start_xmit = emac_start_xmit_sg, .ndo_change_mtu = emac_change_mtu, }; -- cgit v1.2.3 From 7106a069f45b15e63d14484e72969e64798e641c Mon Sep 17 00:00:00 2001 From: Ivan Mikhaylov Date: Wed, 14 Sep 2016 19:06:45 +0300 Subject: net/ibm/emac: add mutex to 'set multicast list' for preventing race conditions within ioctl calls. Signed-off-by: Ivan Mikhaylov Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/emac/core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index 2dfc60308648..7af09cbc53f0 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -977,7 +977,10 @@ static void emac_set_multicast_list(struct net_device *ndev) dev->mcast_pending = 1; return; } + + mutex_lock(&dev->link_lock); __emac_set_multicast_list(dev); + mutex_unlock(&dev->link_lock); } static int emac_set_mac_address(struct net_device *ndev, void *sa) -- cgit v1.2.3 From bc6c03fa3cacd31b873e36ca16ef9678269deae6 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 15 Sep 2016 03:45:07 +0000 Subject: nfp: fix error return code in nfp_net_netdev_open() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 73725d9dfd99 ("nfp: allocate ring SW structs dynamically") Signed-off-by: Wei Yongjun Acked-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index 252e4924de0f..39dadfca84ef 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -2044,12 +2044,16 @@ static int nfp_net_netdev_open(struct net_device *netdev) nn->rx_rings = kcalloc(nn->num_rx_rings, sizeof(*nn->rx_rings), GFP_KERNEL); - if (!nn->rx_rings) + if (!nn->rx_rings) { + err = -ENOMEM; goto err_free_lsc; + } nn->tx_rings = kcalloc(nn->num_tx_rings, sizeof(*nn->tx_rings), GFP_KERNEL); - if (!nn->tx_rings) + if (!nn->tx_rings) { + err = -ENOMEM; goto err_free_rx_rings; + } for (r = 0; r < nn->num_r_vecs; r++) { err = nfp_net_prepare_vector(nn, &nn->r_vecs[r], r); -- cgit v1.2.3 From 2835d2d9e366a2985b24051d228333bfba82f3a7 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Thu, 15 Sep 2016 22:47:51 +0200 Subject: bna: add missing per queue ethtool stat Commit ba5ca784 "bna: check for dma mapping errors" added besides other things a statistic that counts number of DMA buffer mapping failures per each Rx queue. This counter is not included in ethtool stats output. Fixes: ba5ca784 "bna: check for dma mapping errors" Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c index 0e4fdc3dd729..5671353fc7bc 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c +++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c @@ -31,7 +31,7 @@ #define BNAD_NUM_TXF_COUNTERS 12 #define BNAD_NUM_RXF_COUNTERS 10 #define BNAD_NUM_CQ_COUNTERS (3 + 5) -#define BNAD_NUM_RXQ_COUNTERS 6 +#define BNAD_NUM_RXQ_COUNTERS 7 #define BNAD_NUM_TXQ_COUNTERS 5 #define BNAD_ETHTOOL_STATS_NUM \ @@ -658,6 +658,8 @@ bnad_get_strings(struct net_device *netdev, u32 stringset, u8 *string) string += ETH_GSTRING_LEN; sprintf(string, "rxq%d_allocbuf_failed", q_num); string += ETH_GSTRING_LEN; + sprintf(string, "rxq%d_mapbuf_failed", q_num); + string += ETH_GSTRING_LEN; sprintf(string, "rxq%d_producer_index", q_num); string += ETH_GSTRING_LEN; sprintf(string, "rxq%d_consumer_index", q_num); @@ -678,6 +680,9 @@ bnad_get_strings(struct net_device *netdev, u32 stringset, u8 *string) sprintf(string, "rxq%d_allocbuf_failed", q_num); string += ETH_GSTRING_LEN; + sprintf(string, "rxq%d_mapbuf_failed", + q_num); + string += ETH_GSTRING_LEN; sprintf(string, "rxq%d_producer_index", q_num); string += ETH_GSTRING_LEN; -- cgit v1.2.3 From 37dd348270c1a48f0234354a06c0ce052b6c85b1 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Thu, 15 Sep 2016 22:47:52 +0200 Subject: bna: fix crash in bnad_get_strings() Commit 6e7333d "net: add rx_nohandler stat counter" added the new entry rx_nohandler into struct rtnl_link_stats64. Unfortunately the bna driver foolishly depends on the structure. It uses part of it for ethtool statistics and it's not bad but the driver assumes its size is constant as it defines string for each existing entry. The problem occurs when the structure is extended because you need to modify bna driver as well. If not any attempt to retrieve ethtool statistics results in crash in bnad_get_strings(). The patch changes BNAD_ETHTOOL_STATS_NUM so it counts real number of strings in the array and also removes rtnl_link_stats64 entries that are not used in output and are always zero. Fixes: 6e7333d "net: add rx_nohandler stat counter" Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 50 ++++++++++++------------- 1 file changed, 23 insertions(+), 27 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c index 5671353fc7bc..31f61a744d66 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c +++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c @@ -34,12 +34,7 @@ #define BNAD_NUM_RXQ_COUNTERS 7 #define BNAD_NUM_TXQ_COUNTERS 5 -#define BNAD_ETHTOOL_STATS_NUM \ - (sizeof(struct rtnl_link_stats64) / sizeof(u64) + \ - sizeof(struct bnad_drv_stats) / sizeof(u64) + \ - offsetof(struct bfi_enet_stats, rxf_stats[0]) / sizeof(u64)) - -static const char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = { +static const char *bnad_net_stats_strings[] = { "rx_packets", "tx_packets", "rx_bytes", @@ -50,22 +45,10 @@ static const char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = { "tx_dropped", "multicast", "collisions", - "rx_length_errors", - "rx_over_errors", "rx_crc_errors", "rx_frame_errors", - "rx_fifo_errors", - "rx_missed_errors", - - "tx_aborted_errors", - "tx_carrier_errors", "tx_fifo_errors", - "tx_heartbeat_errors", - "tx_window_errors", - - "rx_compressed", - "tx_compressed", "netif_queue_stop", "netif_queue_wakeup", @@ -254,6 +237,8 @@ static const char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = { "fc_tx_fid_parity_errors", }; +#define BNAD_ETHTOOL_STATS_NUM ARRAY_SIZE(bnad_net_stats_strings) + static int bnad_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) { @@ -859,9 +844,9 @@ bnad_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats, u64 *buf) { struct bnad *bnad = netdev_priv(netdev); - int i, j, bi; + int i, j, bi = 0; unsigned long flags; - struct rtnl_link_stats64 *net_stats64; + struct rtnl_link_stats64 net_stats64; u64 *stats64; u32 bmap; @@ -876,14 +861,25 @@ bnad_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats, * under the same lock */ spin_lock_irqsave(&bnad->bna_lock, flags); - bi = 0; - memset(buf, 0, stats->n_stats * sizeof(u64)); - - net_stats64 = (struct rtnl_link_stats64 *)buf; - bnad_netdev_qstats_fill(bnad, net_stats64); - bnad_netdev_hwstats_fill(bnad, net_stats64); - bi = sizeof(*net_stats64) / sizeof(u64); + memset(&net_stats64, 0, sizeof(net_stats64)); + bnad_netdev_qstats_fill(bnad, &net_stats64); + bnad_netdev_hwstats_fill(bnad, &net_stats64); + + buf[bi++] = net_stats64.rx_packets; + buf[bi++] = net_stats64.tx_packets; + buf[bi++] = net_stats64.rx_bytes; + buf[bi++] = net_stats64.tx_bytes; + buf[bi++] = net_stats64.rx_errors; + buf[bi++] = net_stats64.tx_errors; + buf[bi++] = net_stats64.rx_dropped; + buf[bi++] = net_stats64.tx_dropped; + buf[bi++] = net_stats64.multicast; + buf[bi++] = net_stats64.collisions; + buf[bi++] = net_stats64.rx_length_errors; + buf[bi++] = net_stats64.rx_crc_errors; + buf[bi++] = net_stats64.rx_frame_errors; + buf[bi++] = net_stats64.tx_fifo_errors; /* Get netif_queue_stopped from stack */ bnad->stats.drv_stats.netif_queue_stopped = netif_queue_stopped(netdev); -- cgit v1.2.3 From 19cd120319ef5390404a5d9c829c3a7962f184a8 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Fri, 16 Sep 2016 10:50:13 +0200 Subject: stmmac: fix PWRDWN into the PMT register for global unicast. MAC devices use the RWKPKTEN and MGKPKTEN bits of the PMT Control/Status register to generate power management events. So this patch is to properly set the RWKPKTEN [BIT(2)] inside the PMT register (needed in case of global unicast). Reported-by: Aditi SHARMA Signed-off-by: Giuseppe Cavallaro Cc: Alexandre TORGUE Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 2 +- drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c index cbefe9e2207c..885a5e64519d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c @@ -261,7 +261,7 @@ static void dwmac1000_pmt(struct mac_device_info *hw, unsigned long mode) } if (mode & WAKE_UCAST) { pr_debug("GMAC: WOL on global unicast\n"); - pmt |= global_unicast; + pmt |= power_down | global_unicast | wake_up_frame_en; } writel(pmt, ioaddr + GMAC_PMT); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index df5580dcdfed..51019b794be5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -102,7 +102,7 @@ static void dwmac4_pmt(struct mac_device_info *hw, unsigned long mode) } if (mode & WAKE_UCAST) { pr_debug("GMAC: WOL on global unicast\n"); - pmt |= global_unicast; + pmt |= power_down | global_unicast | wake_up_frame_en; } writel(pmt, ioaddr + GMAC_PMT); -- cgit v1.2.3 From babd6134a54d70efe875fa5661a20eaecb63f278 Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Sun, 18 Sep 2016 18:20:27 +0300 Subject: net/mlx5: Fix flow counter bulk command out mailbox allocation The FW command output length should be only the length of struct mlx5_cmd_fc_bulk out field. Failing to do so will cause the memcpy call which is invoked later in the driver to write over wrong memory address and corrupt kernel memory which results in random crashes. This bug was found using the kernel address sanitizer (kasan). Fixes: a351a1b03bf1 ('net/mlx5: Introduce bulk reading of flow counters') Signed-off-by: Roi Dayan Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c index 9134010e2921..287ade151ec8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c @@ -425,11 +425,11 @@ struct mlx5_cmd_fc_bulk * mlx5_cmd_fc_bulk_alloc(struct mlx5_core_dev *dev, u16 id, int num) { struct mlx5_cmd_fc_bulk *b; - int outlen = sizeof(*b) + + int outlen = MLX5_ST_SZ_BYTES(query_flow_counter_out) + MLX5_ST_SZ_BYTES(traffic_counter) * num; - b = kzalloc(outlen, GFP_KERNEL); + b = kzalloc(sizeof(*b) + outlen, GFP_KERNEL); if (!b) return NULL; -- cgit v1.2.3 From 4eea37d7b92076fdeac2a21e5f4dbd92d286719d Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Sun, 18 Sep 2016 18:20:28 +0300 Subject: net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init code When enablement of the SRIOV e-switch in certain mode (switchdev or legacy) fails, we must set the mode to none. Otherwise, we'll run into double free based crashes when further attempting to deal with the e-switch (such as when disabling sriov or unloading the driver). Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index 8b78f156214e..b247949df135 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1554,6 +1554,7 @@ int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode) abort: esw_enable_vport(esw, 0, UC_ADDR_CHANGE); + esw->mode = SRIOV_NONE; return err; } -- cgit v1.2.3 From 6c419ba8e2580ab17c164db6e918e163d3537ec1 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Sun, 18 Sep 2016 18:20:29 +0300 Subject: net/mlx5: E-Switch, Handle mode change failures E-switch mode changes involve creating HW tables, potentially allocating netdevices, etc, and things can fail. Add an attempt to rollback to the existing mode when changing to the new mode fails. Only if rollback fails, getting proper SRIOV functionality requires module unload or sriov disablement/enablement. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index 3dc83a9459a4..7de40e6b0c25 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -446,7 +446,7 @@ out: static int esw_offloads_start(struct mlx5_eswitch *esw) { - int err, num_vfs = esw->dev->priv.sriov.num_vfs; + int err, err1, num_vfs = esw->dev->priv.sriov.num_vfs; if (esw->mode != SRIOV_LEGACY) { esw_warn(esw->dev, "Can't set offloads mode, SRIOV legacy not enabled\n"); @@ -455,8 +455,12 @@ static int esw_offloads_start(struct mlx5_eswitch *esw) mlx5_eswitch_disable_sriov(esw); err = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_OFFLOADS); - if (err) - esw_warn(esw->dev, "Failed set eswitch to offloads, err %d\n", err); + if (err) { + esw_warn(esw->dev, "Failed setting eswitch to offloads, err %d\n", err); + err1 = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_LEGACY); + if (err1) + esw_warn(esw->dev, "Failed setting eswitch back to legacy, err %d\n", err); + } return err; } @@ -508,12 +512,16 @@ create_ft_err: static int esw_offloads_stop(struct mlx5_eswitch *esw) { - int err, num_vfs = esw->dev->priv.sriov.num_vfs; + int err, err1, num_vfs = esw->dev->priv.sriov.num_vfs; mlx5_eswitch_disable_sriov(esw); err = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_LEGACY); - if (err) - esw_warn(esw->dev, "Failed set eswitch legacy mode. err %d\n", err); + if (err) { + esw_warn(esw->dev, "Failed setting eswitch to legacy, err %d\n", err); + err1 = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_OFFLOADS); + if (err1) + esw_warn(esw->dev, "Failed setting eswitch back to offloads, err %d\n", err); + } return err; } -- cgit v1.2.3 From 67a99b7061c07b190ac6c39f136afedbb7aa86e9 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 19 Sep 2016 17:47:41 +0300 Subject: qed: Fix stack corruption on probe Commit fe56b9e6a8d95 ("qed: Add module with basic common support") has introduced a stack corruption during probe, where filling a local struct with data to be sent to management firmware is incorrectly filled; The data is written outside of the struct and corrupts the stack. Changes from v1: ---------------- - Correct the value written [Caught by David Laight] Fixes: fe56b9e6a8d95 ("qed: Add module with basic common support") Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index a240f26344a4..f776a77794c5 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -1153,8 +1153,8 @@ qed_mcp_send_drv_version(struct qed_hwfn *p_hwfn, p_drv_version = &union_data.drv_version; p_drv_version->version = p_ver->version; - for (i = 0; i < MCP_DRV_VER_STR_SIZE - 1; i += 4) { - val = cpu_to_be32(p_ver->name[i]); + for (i = 0; i < (MCP_DRV_VER_STR_SIZE - 4) / sizeof(u32); i++) { + val = cpu_to_be32(*((u32 *)&p_ver->name[i * sizeof(u32)])); *(__be32 *)&p_drv_version->name[i * sizeof(u32)] = val; } -- cgit v1.2.3 From 9b86a8d19bd6406a10de5f924bf2a003a502d427 Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Tue, 20 Sep 2016 12:00:52 +0530 Subject: cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapter We were missing check for 25G and 100G while checking port speed, which lead to less number of queues getting allocated for 25G & 100G adapters and leading to low throughput. Adding the missing check for both NIC and vNIC driver. Also fixes port advertisement for 25G and 100G in ethtool output. Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 4 ++-- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 15 +++++++++++++-- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 7 ++++++- drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h | 6 ++++++ drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h | 15 +++++++++++---- drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c | 9 +++++++-- 6 files changed, 45 insertions(+), 11 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index 2e2aa9fec9bb..edd23386b47d 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -419,8 +419,8 @@ struct link_config { unsigned short supported; /* link capabilities */ unsigned short advertising; /* advertised capabilities */ unsigned short lp_advertising; /* peer advertised capabilities */ - unsigned short requested_speed; /* speed user has requested */ - unsigned short speed; /* actual link speed */ + unsigned int requested_speed; /* speed user has requested */ + unsigned int speed; /* actual link speed */ unsigned char requested_fc; /* flow control user has requested */ unsigned char fc; /* actual link flow control */ unsigned char autoneg; /* autonegotiating? */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index c762a8c8c954..3ceafb55d6da 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -4305,10 +4305,17 @@ static const struct pci_error_handlers cxgb4_eeh = { .resume = eeh_resume, }; +/* Return true if the Link Configuration supports "High Speeds" (those greater + * than 1Gb/s). + */ static inline bool is_x_10g_port(const struct link_config *lc) { - return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0 || - (lc->supported & FW_PORT_CAP_SPEED_40G) != 0; + unsigned int speeds, high_speeds; + + speeds = FW_PORT_CAP_SPEED_V(FW_PORT_CAP_SPEED_G(lc->supported)); + high_speeds = speeds & ~(FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G); + + return high_speeds != 0; } static inline void init_rspq(struct adapter *adap, struct sge_rspq *q, @@ -4756,8 +4763,12 @@ static void print_port_info(const struct net_device *dev) bufp += sprintf(bufp, "1000/"); if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G) bufp += sprintf(bufp, "10G/"); + if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_25G) + bufp += sprintf(bufp, "25G/"); if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_40G) bufp += sprintf(bufp, "40G/"); + if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100G) + bufp += sprintf(bufp, "100G/"); if (bufp != buf) --bufp; sprintf(bufp, "BASE-%s", t4_get_port_type_description(pi->port_type)); diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index dc92c80a75f4..660204bff726 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -3627,7 +3627,8 @@ void t4_ulprx_read_la(struct adapter *adap, u32 *la_buf) } #define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ - FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \ + FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_25G | \ + FW_PORT_CAP_SPEED_40G | FW_PORT_CAP_SPEED_100G | \ FW_PORT_CAP_ANEG) /** @@ -7196,8 +7197,12 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) speed = 1000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) speed = 10000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G)) + speed = 25000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) speed = 40000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G)) + speed = 100000; lc = &pi->link_cfg; diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h index a89b30720e38..30507d44422c 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h @@ -2265,6 +2265,12 @@ enum fw_port_cap { FW_PORT_CAP_802_3_ASM_DIR = 0x8000, }; +#define FW_PORT_CAP_SPEED_S 0 +#define FW_PORT_CAP_SPEED_M 0x3f +#define FW_PORT_CAP_SPEED_V(x) ((x) << FW_PORT_CAP_SPEED_S) +#define FW_PORT_CAP_SPEED_G(x) \ + (((x) >> FW_PORT_CAP_SPEED_S) & FW_PORT_CAP_SPEED_M) + enum fw_port_mdi { FW_PORT_CAP_MDI_UNCHANGED, FW_PORT_CAP_MDI_AUTO, diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h index 8ee541431e8b..17a2bbcf93f0 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h @@ -108,8 +108,8 @@ struct link_config { unsigned int supported; /* link capabilities */ unsigned int advertising; /* advertised capabilities */ unsigned short lp_advertising; /* peer advertised capabilities */ - unsigned short requested_speed; /* speed user has requested */ - unsigned short speed; /* actual link speed */ + unsigned int requested_speed; /* speed user has requested */ + unsigned int speed; /* actual link speed */ unsigned char requested_fc; /* flow control user has requested */ unsigned char fc; /* actual link flow control */ unsigned char autoneg; /* autonegotiating? */ @@ -271,10 +271,17 @@ static inline bool is_10g_port(const struct link_config *lc) return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0; } +/* Return true if the Link Configuration supports "High Speeds" (those greater + * than 1Gb/s). + */ static inline bool is_x_10g_port(const struct link_config *lc) { - return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0 || - (lc->supported & FW_PORT_CAP_SPEED_40G) != 0; + unsigned int speeds, high_speeds; + + speeds = FW_PORT_CAP_SPEED_V(FW_PORT_CAP_SPEED_G(lc->supported)); + high_speeds = speeds & ~(FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G); + + return high_speeds != 0; } static inline unsigned int core_ticks_per_usec(const struct adapter *adapter) diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c index 427bfa71388b..b5622b1689e9 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c @@ -314,8 +314,9 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size, } #define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ - FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \ - FW_PORT_CAP_SPEED_100G | FW_PORT_CAP_ANEG) + FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_25G | \ + FW_PORT_CAP_SPEED_40G | FW_PORT_CAP_SPEED_100G | \ + FW_PORT_CAP_ANEG) /** * init_link_config - initialize a link's SW state @@ -1712,8 +1713,12 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) speed = 1000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) speed = 10000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G)) + speed = 25000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) speed = 40000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G)) + speed = 100000; /* * Scan all of our "ports" (Virtual Interfaces) looking for -- cgit v1.2.3 From fba1296624bf95fc07057da1e26beee8a733180c Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Tue, 20 Sep 2016 14:55:31 +0300 Subject: net/mlx4_core: Fix to clean devlink resources This patch cleans devlink resources by calling devlink_port_unregister() to avoid the following issues: - Kernel panic when triggering reset flow. - Memory leak due to unfreed resources in mlx4_init_port_info(). Fixes: 09d4d087cd48 ("mlx4: Implement devlink interface") Signed-off-by: Kamal Heib Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 75dd2e3d3059..7183ac4135d2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -2970,6 +2970,7 @@ static int mlx4_init_port_info(struct mlx4_dev *dev, int port) mlx4_err(dev, "Failed to create mtu file for port %d\n", port); device_remove_file(&info->dev->persist->pdev->dev, &info->port_attr); + devlink_port_unregister(&info->devlink_port); info->port = -1; } @@ -2984,6 +2985,8 @@ static void mlx4_cleanup_port_info(struct mlx4_port_info *info) device_remove_file(&info->dev->persist->pdev->dev, &info->port_attr); device_remove_file(&info->dev->persist->pdev->dev, &info->port_mtu_attr); + devlink_port_unregister(&info->devlink_port); + #ifdef CONFIG_RFS_ACCEL free_irq_cpu_rmap(info->rmap); info->rmap = NULL; -- cgit v1.2.3