From a93f7fe134543649cf2e2d8fc2c50a8f4d742915 Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Mon, 22 Apr 2019 21:52:23 +0800 Subject: net: phy: marvell: add new default led configure for m88e151x The default m88e151x LED configuration is 0x1177, used LED[0] for 1000M link, LED[1] for 100M link, and LED[2] for active. But for some boards, which use LED[0] for link, and LED[1] for active, prefer to be 0x1040. To be compatible with this case, this patch defines a new dev_flag, and set it before connect phy in HNS3 driver. When phy initializing, using the new LED configuration if this dev_flag is set. Signed-off-by: Jian Shen Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net/phy/marvell.c') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 8754cb883d02..a7e8c8113d97 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -137,6 +137,7 @@ #define MII_PHY_LED_CTRL 16 #define MII_88E1121_PHY_LED_DEF 0x0030 #define MII_88E1510_PHY_LED_DEF 0x1177 +#define MII_88E1510_PHY_LED0_LINK_LED1_ACTIVE 0x1040 #define MII_M1011_PHY_STATUS 0x11 #define MII_M1011_PHY_STATUS_1000 0x8000 @@ -633,7 +634,10 @@ static void marvell_config_led(struct phy_device *phydev) * LED[2] .. Blink, Activity */ case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1510): - def_config = MII_88E1510_PHY_LED_DEF; + if (phydev->dev_flags & MARVELL_PHY_LED0_LINK_LED1_ACTIVE) + def_config = MII_88E1510_PHY_LED0_LINK_LED1_ACTIVE; + else + def_config = MII_88E1510_PHY_LED_DEF; break; default: return; -- cgit v1.2.3