From 212ea99a85d30dbc834888384c57ad5abbc67a0a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 23 Sep 2012 16:58:49 +0000 Subject: phy/micrel: Implement support for KSZ8021 The KSZ8021 PHY was previously caught by KS8051, which is not correct. This PHY needs additional setup if it is strapped for address 0. In such case an reserved bit must be written in the 0x16, "Operation Mode Strap Override" register. According to the KS8051 datasheet, that bit means "PHY Address 0 in non-broadcast" and it indeed behaves as such on KSZ8021. The issue where the ethernet controller (Freescale FEC) did not communicate with network is fixed by writing this bit as 1. Signed-off-by: Marek Vasut Cc: David J. Choi Cc: David S. Miller Cc: Nobuhiro Iwamatsu Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'drivers/net/phy/micrel.c') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index cf287e0eb408..e8e00dc087f1 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -21,6 +21,12 @@ #include #include +/* Operation Mode Strap Override */ +#define MII_KSZPHY_OMSO 0x16 +#define KSZPHY_OMSO_B_CAST_OFF (1 << 9) +#define KSZPHY_OMSO_RMII_OVERRIDE (1 << 1) +#define KSZPHY_OMSO_MII_OVERRIDE (1 << 0) + /* general Interrupt control/status reg in vendor specific block. */ #define MII_KSZPHY_INTCS 0x1B #define KSZPHY_INTCS_JABBER (1 << 15) @@ -101,6 +107,13 @@ static int kszphy_config_init(struct phy_device *phydev) return 0; } +static int ksz8021_config_init(struct phy_device *phydev) +{ + const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE; + phy_write(phydev, MII_KSZPHY_OMSO, val); + return 0; +} + static int ks8051_config_init(struct phy_device *phydev) { int regval; @@ -127,6 +140,19 @@ static struct phy_driver ksphy_driver[] = { .ack_interrupt = kszphy_ack_interrupt, .config_intr = ks8737_config_intr, .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_KSZ8021, + .phy_id_mask = 0x00ffffff, + .name = "Micrel KSZ8021", + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = ksz8021_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_KS8041, .phy_id_mask = 0x00fffff0, @@ -203,6 +229,7 @@ static struct mdio_device_id __maybe_unused micrel_tbl[] = { { PHY_ID_KSZ9021, 0x000ffffe }, { PHY_ID_KS8001, 0x00ffffff }, { PHY_ID_KS8737, 0x00fffff0 }, + { PHY_ID_KSZ8021, 0x00ffffff }, { PHY_ID_KS8041, 0x00fffff0 }, { PHY_ID_KS8051, 0x00fffff0 }, { } -- cgit v1.2.3 From 510d573fefed904a136b220b259bf48d99d5e381 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 23 Sep 2012 16:58:50 +0000 Subject: phy/micrel: Rename KS80xx to KSZ80xx There is no such part as KS8001, KS8041 or KS8051. There are only KSZ8001, KSZ8041 and KSZ8051. Rename these parts as such to match the Micrel naming. Signed-off-by: Marek Vasut Cc: David J. Choi Cc: David S. Miller Cc: Nobuhiro Iwamatsu Cc: Linux ARM kernel Cc: Fabio Estevam Cc: Shawn Guo Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/net/phy/micrel.c') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index e8e00dc087f1..2165d5fdb8c0 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -154,9 +154,9 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }, { - .phy_id = PHY_ID_KS8041, + .phy_id = PHY_ID_KSZ8041, .phy_id_mask = 0x00fffff0, - .name = "Micrel KS8041", + .name = "Micrel KSZ8041", .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, @@ -167,9 +167,9 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }, { - .phy_id = PHY_ID_KS8051, + .phy_id = PHY_ID_KSZ8051, .phy_id_mask = 0x00fffff0, - .name = "Micrel KS8051", + .name = "Micrel KSZ8051", .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, @@ -180,8 +180,8 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }, { - .phy_id = PHY_ID_KS8001, - .name = "Micrel KS8001 or KS8721", + .phy_id = PHY_ID_KSZ8001, + .name = "Micrel KSZ8001 or KS8721", .phy_id_mask = 0x00ffffff, .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, @@ -227,11 +227,11 @@ MODULE_LICENSE("GPL"); static struct mdio_device_id __maybe_unused micrel_tbl[] = { { PHY_ID_KSZ9021, 0x000ffffe }, - { PHY_ID_KS8001, 0x00ffffff }, + { PHY_ID_KSZ8001, 0x00ffffff }, { PHY_ID_KS8737, 0x00fffff0 }, { PHY_ID_KSZ8021, 0x00ffffff }, - { PHY_ID_KS8041, 0x00fffff0 }, - { PHY_ID_KS8051, 0x00fffff0 }, + { PHY_ID_KSZ8041, 0x00fffff0 }, + { PHY_ID_KSZ8051, 0x00fffff0 }, { } }; -- cgit v1.2.3