From e279d634f3d57452eb106a0c0e99a6add3fba1a6 Mon Sep 17 00:00:00 2001 From: Shay Agroskin Date: Wed, 27 Jun 2018 15:43:07 +0300 Subject: net/mlx5e: Refine ets validation function Removed an error message received when configuring ETS total bandwidth to be zero. Our hardware doesn't support such configuration, so we shall reject it in the driver. Nevertheless, we removed the error message in order to eliminate error messages caused by old userspace tools who try to pass such configuration. Fixes: ff0891915cd7 ("net/mlx5e: Fix ETS BW check") Signed-off-by: Shay Agroskin Reviewed-by: Huy Nguyen Reviewed-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index 0a52f31fef37..86bc9ac99586 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -275,7 +275,8 @@ int mlx5e_dcbnl_ieee_setets_core(struct mlx5e_priv *priv, struct ieee_ets *ets) } static int mlx5e_dbcnl_validate_ets(struct net_device *netdev, - struct ieee_ets *ets) + struct ieee_ets *ets, + bool zero_sum_allowed) { bool have_ets_tc = false; int bw_sum = 0; @@ -300,8 +301,9 @@ static int mlx5e_dbcnl_validate_ets(struct net_device *netdev, } if (have_ets_tc && bw_sum != 100) { - netdev_err(netdev, - "Failed to validate ETS: BW sum is illegal\n"); + if (bw_sum || (!bw_sum && !zero_sum_allowed)) + netdev_err(netdev, + "Failed to validate ETS: BW sum is illegal\n"); return -EINVAL; } return 0; @@ -316,7 +318,7 @@ static int mlx5e_dcbnl_ieee_setets(struct net_device *netdev, if (!MLX5_CAP_GEN(priv->mdev, ets)) return -EOPNOTSUPP; - err = mlx5e_dbcnl_validate_ets(netdev, ets); + err = mlx5e_dbcnl_validate_ets(netdev, ets, false); if (err) return err; @@ -642,12 +644,9 @@ static u8 mlx5e_dcbnl_setall(struct net_device *netdev) ets.prio_tc[i]); } - err = mlx5e_dbcnl_validate_ets(netdev, &ets); - if (err) { - netdev_err(netdev, - "%s, Failed to validate ETS: %d\n", __func__, err); + err = mlx5e_dbcnl_validate_ets(netdev, &ets, true); + if (err) goto out; - } err = mlx5e_dcbnl_ieee_setets_core(priv, &ets); if (err) { -- cgit v1.2.3 From 33180bee86a8940a84950edca46315cd9dd6deb5 Mon Sep 17 00:00:00 2001 From: Ariel Levkovich Date: Mon, 25 Jun 2018 19:12:02 +0300 Subject: net/mlx5: Adjust clock overflow work period When driver converts HW timestamp to wall clock time it subtracts the last saved cycle counter from the HW timestamp and converts the difference to nanoseconds. The conversion is done by multiplying the cycles difference with the clock multiplier value as a first step and therefore the cycles difference should be small enough so that the multiplication product doesn't exceed 64bit. The overflow handling routine is in charge of updating the last saved cycle counter in driver and it is called periodically using kernel delayed workqueue. The delay period for this work is calculated using the max HW cycle counter value (a 41 bit mask) as a base which doesn't take the 64bit limit into account so the delay period may be incorrect and too long to prevent a large difference between the HW counter and the last saved counter in SW. This change adjusts the work period for the HW clock overflow work by taking the minimum between the previous value and the quotient of max u64 value and the clock multiplier value. Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support") Signed-off-by: Ariel Levkovich Reviewed-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c index 1e062e6b2587..3f767cde4c1d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c @@ -488,6 +488,7 @@ void mlx5_pps_event(struct mlx5_core_dev *mdev, void mlx5_init_clock(struct mlx5_core_dev *mdev) { struct mlx5_clock *clock = &mdev->clock; + u64 overflow_cycles; u64 ns; u64 frac = 0; u32 dev_freq; @@ -511,10 +512,17 @@ void mlx5_init_clock(struct mlx5_core_dev *mdev) /* Calculate period in seconds to call the overflow watchdog - to make * sure counter is checked at least once every wrap around. + * The period is calculated as the minimum between max HW cycles count + * (The clock source mask) and max amount of cycles that can be + * multiplied by clock multiplier where the result doesn't exceed + * 64bits. */ - ns = cyclecounter_cyc2ns(&clock->cycles, clock->cycles.mask, + overflow_cycles = div64_u64(~0ULL >> 1, clock->cycles.mult); + overflow_cycles = min(overflow_cycles, clock->cycles.mask >> 1); + + ns = cyclecounter_cyc2ns(&clock->cycles, overflow_cycles, frac, &frac); - do_div(ns, NSEC_PER_SEC / 2 / HZ); + do_div(ns, NSEC_PER_SEC / HZ); clock->overflow_period = ns; mdev->clock_info_page = alloc_page(GFP_KERNEL); -- cgit v1.2.3 From 2630bae8018823c3b88788b69fb9f16ea3b4a11e Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Sun, 8 Jul 2018 13:08:55 +0300 Subject: net/mlx5e: Fix quota counting in aRFS expire flow Quota should follow the amount of rules which do expire, and not the number of rules that were examined, fixed that. Fixes: 18c908e477dc ("net/mlx5e: Add accelerated RFS support") Signed-off-by: Eran Ben Elisha Reviewed-by: Maor Gottlieb Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c index 75e4308ba786..7b54a4999cf3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c @@ -381,14 +381,14 @@ static void arfs_may_expire_flow(struct mlx5e_priv *priv) HLIST_HEAD(del_list); spin_lock_bh(&priv->fs.arfs.arfs_lock); mlx5e_for_each_arfs_rule(arfs_rule, htmp, priv->fs.arfs.arfs_tables, i, j) { - if (quota++ > MLX5E_ARFS_EXPIRY_QUOTA) - break; if (!work_pending(&arfs_rule->arfs_work) && rps_may_expire_flow(priv->netdev, arfs_rule->rxq, arfs_rule->flow_id, arfs_rule->filter_id)) { hlist_del_init(&arfs_rule->hlist); hlist_add_head(&arfs_rule->hlist, &del_list); + if (quota++ > MLX5E_ARFS_EXPIRY_QUOTA) + break; } } spin_unlock_bh(&priv->fs.arfs.arfs_lock); -- cgit v1.2.3 From d2e1c57bcf9a07cbb67f30ecf238f298799bce1c Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Sun, 8 Jul 2018 14:52:12 +0300 Subject: net/mlx5e: Don't allow aRFS for encapsulated packets Driver is yet to support aRFS for encapsulated packets, return early error in such case. Fixes: 18c908e477dc ("net/mlx5e: Add accelerated RFS support") Signed-off-by: Eran Ben Elisha Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c index 7b54a4999cf3..d258bb679271 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c @@ -711,6 +711,9 @@ int mlx5e_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb, skb->protocol != htons(ETH_P_IPV6)) return -EPROTONOSUPPORT; + if (skb->encapsulation) + return -EPROTONOSUPPORT; + arfs_t = arfs_get_table(arfs, arfs_get_ip_proto(skb), skb->protocol); if (!arfs_t) return -EPROTONOSUPPORT; -- cgit v1.2.3 From 443a858158d35916e572b75667ca4924a6af2182 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Mon, 9 Jul 2018 16:41:40 -0700 Subject: net/mlx5: E-Switch, UBSAN fix undefined behavior in mlx5_eswitch_mode With debug kernel UBSAN detects the following issue, which might happen when eswitch instance is not created, fix this by testing the eswitch pointer before returning the eswitch mode, if not set return mode = SRIOV_NONE. [ 32.528951] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/eswitch.c:2219:12 [ 32.528951] member access within null pointer of type 'struct mlx5_eswitch' [ 32.528951] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc3-dirty #181 [ 32.528951] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 32.528951] Call Trace: [ 32.528951] dump_stack+0xc7/0x13b [ 32.528951] ? show_regs_print_info+0x5/0x5 [ 32.528951] ? __pm_runtime_use_autosuspend+0x140/0x140 [ 32.528951] ubsan_epilogue+0x9/0x49 [ 32.528951] ubsan_type_mismatch_common+0x1f9/0x2c0 [ 32.528951] ? ucs2_as_utf8+0x310/0x310 [ 32.528951] ? device_initialize+0x229/0x2e0 [ 32.528951] __ubsan_handle_type_mismatch+0x9f/0xc9 [ 32.528951] ? __ubsan_handle_divrem_overflow+0x19b/0x19b [ 32.578008] ? ib_device_get_by_index+0xf0/0xf0 [ 32.578008] mlx5_eswitch_mode+0x30/0x40 [ 32.578008] mlx5_ib_add+0x1e0/0x4a0 Fixes: 57cbd893c4c5 ("net/mlx5: E-Switch, Move representors definition to a global scope") Signed-off-by: Saeed Mahameed Reviewed-by: Leon Romanovsky --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index b79d74860a30..dd01ad4c0b54 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -2216,6 +2216,6 @@ free_out: u8 mlx5_eswitch_mode(struct mlx5_eswitch *esw) { - return esw->mode; + return ESW_ALLOWED(esw) ? esw->mode : SRIOV_NONE; } EXPORT_SYMBOL_GPL(mlx5_eswitch_mode); -- cgit v1.2.3 From 8c49f54a3f48ddb516e7e12e5c065317c06a58fa Mon Sep 17 00:00:00 2001 From: Raed Salem Date: Tue, 3 Jul 2018 10:10:38 +0300 Subject: net/mlx5: Fix 'DON'T_TRAP' functionality The flow counters binding support commit introduced a code change where none NULL 'rule_dest' is always passed to mlx5_add_flow_rules, this breaks 'DON'T_TRAP' rules insertion. The fix uses the equivalent 'dest_num' value instead of dest pointer at the failed check. fixes: 3b3233fbf02e ('IB/mlx5: Add flow counters binding support') Signed-off-by: Raed Salem Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index f1a86cea86a0..6ddb2565884d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1887,7 +1887,7 @@ mlx5_add_flow_rules(struct mlx5_flow_table *ft, if (flow_act->action == MLX5_FLOW_CONTEXT_ACTION_FWD_NEXT_PRIO) { if (!fwd_next_prio_supported(ft)) return ERR_PTR(-EOPNOTSUPP); - if (dest) + if (dest_num) return ERR_PTR(-EINVAL); mutex_lock(&root->chain_lock); next_ft = find_next_chained_ft(prio); -- cgit v1.2.3 From d7037ad73daa9598b8caa7d5fdf41e8ceee6ef73 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Sun, 8 Jul 2018 12:14:59 +0300 Subject: net/mlx5: Fix QP fragmented buffer allocation Fix bad alignment of SQ buffer in fragmented QP allocation. It should start directly after RQ buffer ends. Take special care of the end case where the RQ buffer does not occupy a whole page. RQ size is a power of two, so would be the case only for small RQ sizes (RQ size < PAGE_SIZE). Fix wrong assignments for sqb->size (mistakenly assigned RQ size), and for npages value of RQ and SQ. Fixes: 3a2f70331226 ("net/mlx5: Use order-0 allocations for all WQ types") Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/alloc.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/wq.c | 34 ++++++++++++++++--------- 2 files changed, 23 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/alloc.c b/drivers/net/ethernet/mellanox/mlx5/core/alloc.c index 323ffe8bf7e4..456f30007ad6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/alloc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/alloc.c @@ -123,7 +123,7 @@ int mlx5_frag_buf_alloc_node(struct mlx5_core_dev *dev, int size, int i; buf->size = size; - buf->npages = 1 << get_order(size); + buf->npages = DIV_ROUND_UP(size, PAGE_SIZE); buf->page_shift = PAGE_SHIFT; buf->frags = kcalloc(buf->npages, sizeof(struct mlx5_buf_list), GFP_KERNEL); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/wq.c b/drivers/net/ethernet/mellanox/mlx5/core/wq.c index b97bb72b4db4..86478a6b99c5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/wq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/wq.c @@ -113,35 +113,45 @@ err_db_free: return err; } -static void mlx5e_qp_set_frag_buf(struct mlx5_frag_buf *buf, - struct mlx5_wq_qp *qp) +static void mlx5_qp_set_frag_buf(struct mlx5_frag_buf *buf, + struct mlx5_wq_qp *qp) { + struct mlx5_frag_buf_ctrl *sq_fbc; struct mlx5_frag_buf *rqb, *sqb; - rqb = &qp->rq.fbc.frag_buf; + rqb = &qp->rq.fbc.frag_buf; *rqb = *buf; rqb->size = mlx5_wq_cyc_get_byte_size(&qp->rq); - rqb->npages = 1 << get_order(rqb->size); + rqb->npages = DIV_ROUND_UP(rqb->size, PAGE_SIZE); - sqb = &qp->sq.fbc.frag_buf; - *sqb = *buf; - sqb->size = mlx5_wq_cyc_get_byte_size(&qp->rq); - sqb->npages = 1 << get_order(sqb->size); + sq_fbc = &qp->sq.fbc; + sqb = &sq_fbc->frag_buf; + *sqb = *buf; + sqb->size = mlx5_wq_cyc_get_byte_size(&qp->sq); + sqb->npages = DIV_ROUND_UP(sqb->size, PAGE_SIZE); sqb->frags += rqb->npages; /* first part is for the rq */ + if (sq_fbc->strides_offset) + sqb->frags--; } int mlx5_wq_qp_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param, void *qpc, struct mlx5_wq_qp *wq, struct mlx5_wq_ctrl *wq_ctrl) { + u32 sq_strides_offset; int err; mlx5_fill_fbc(MLX5_GET(qpc, qpc, log_rq_stride) + 4, MLX5_GET(qpc, qpc, log_rq_size), &wq->rq.fbc); - mlx5_fill_fbc(ilog2(MLX5_SEND_WQE_BB), - MLX5_GET(qpc, qpc, log_sq_size), - &wq->sq.fbc); + + sq_strides_offset = + ((wq->rq.fbc.frag_sz_m1 + 1) % PAGE_SIZE) / MLX5_SEND_WQE_BB; + + mlx5_fill_fbc_offset(ilog2(MLX5_SEND_WQE_BB), + MLX5_GET(qpc, qpc, log_sq_size), + sq_strides_offset, + &wq->sq.fbc); err = mlx5_db_alloc_node(mdev, &wq_ctrl->db, param->db_numa_node); if (err) { @@ -156,7 +166,7 @@ int mlx5_wq_qp_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param, goto err_db_free; } - mlx5e_qp_set_frag_buf(&wq_ctrl->buf, wq); + mlx5_qp_set_frag_buf(&wq_ctrl->buf, wq); wq->rq.db = &wq_ctrl->db.db[MLX5_RCV_DBR]; wq->sq.db = &wq_ctrl->db.db[MLX5_SND_DBR]; -- cgit v1.2.3 From 7e29392eee7a1e3318eeb1099807264a49f60e33 Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Thu, 12 Jul 2018 18:25:59 +0300 Subject: net/mlx5e: Only allow offloading decap egress (egdev) flows We get egress rules through the egdev mechanism when the ingress device is not supporting offload, with the expected use-case of tunnel decap ingress rule set on shared tunnel device. Make sure to offload egress/egdev rules only if decap action (tunnel key unset) exists there and err otherwise. Fixes: 717503b9cf57 ("net: sched: convert cls_flower->egress_dev users to tc_setup_cb_egdev infra") Signed-off-by: Roi Dayan Signed-off-by: Paul Blakey Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 0edf4751a8ba..3a2c4e548226 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -1957,6 +1957,10 @@ static bool actions_match_supported(struct mlx5e_priv *priv, else actions = flow->nic_attr->action; + if (flow->flags & MLX5E_TC_FLOW_EGRESS && + !(actions & MLX5_FLOW_CONTEXT_ACTION_DECAP)) + return false; + if (actions & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR) return modify_header_match_supported(&parse_attr->spec, exts); -- cgit v1.2.3 From f7482683f1f4925c60941dbbd0813ceaa069d106 Mon Sep 17 00:00:00 2001 From: Zhao Chen Date: Wed, 18 Jul 2018 00:33:18 -0400 Subject: net-next/hinic: fix a problem in hinic_xmit_frame() The calculation of "wqe_size" is not correct when the tx queue is busy in hinic_xmit_frame(). When there are no free WQEs, the tx flow will unmap the skb buffer, then ring the doobell for the pending packets. But the "wqe_size" which used to calculate the doorbell address is not correct. The wqe size should be cleared to 0, otherwise, it will cause a doorbell error. This patch fixes the problem. Reported-by: Zhou Wang Signed-off-by: Zhao Chen Signed-off-by: David S. Miller --- drivers/net/ethernet/huawei/hinic/hinic_tx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/huawei/hinic/hinic_tx.c b/drivers/net/ethernet/huawei/hinic/hinic_tx.c index 9128858479c4..2353ec829c04 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_tx.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_tx.c @@ -229,6 +229,7 @@ netdev_tx_t hinic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) txq->txq_stats.tx_busy++; u64_stats_update_end(&txq->txq_stats.syncp); err = NETDEV_TX_BUSY; + wqe_size = 0; goto flush_skbs; } -- cgit v1.2.3 From c1f897ce186a529a494441642125479d38727a3d Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Wed, 18 Jul 2018 14:49:36 -0400 Subject: bonding: set default miimon value for non-arp modes if not set For some time now, if you load the bonding driver and configure bond parameters via sysfs using minimal config options, such as specifying nothing but the mode, relying on defaults for everything else, modes that cannot use arp monitoring (802.3ad, balance-tlb, balance-alb) all wind up with both arp_interval=0 (as it should be) and miimon=0, which means the miimon monitor thread never actually runs. This is particularly problematic for 802.3ad. For example, from an LNST recipe I've set up: $ modprobe bonding max_bonds=0" $ echo "+t_bond0" > /sys/class/net/bonding_masters" $ ip link set t_bond0 down" $ echo "802.3ad" > /sys/class/net/t_bond0/bonding/mode" $ ip link set ens1f1 down" $ echo "+ens1f1" > /sys/class/net/t_bond0/bonding/slaves" $ ip link set ens1f0 down" $ echo "+ens1f0" > /sys/class/net/t_bond0/bonding/slaves" $ ethtool -i t_bond0" $ ip link set ens1f1 up" $ ip link set ens1f0 up" $ ip link set t_bond0 up" $ ip addr add 192.168.9.1/24 dev t_bond0" $ ip addr add 2002::1/64 dev t_bond0" This bond comes up okay, but things look slightly suspect in /proc/net/bonding/t_bond0 output: $ grep -i mii /proc/net/bonding/t_bond0 MII Status: up MII Polling Interval (ms): 0 MII Status: up MII Status: up Now, pull a cable on one of the ports in the bond, then reconnect it, and you'll see: Slave Interface: ens1f0 MII Status: down Speed: 1000 Mbps Duplex: full I believe this became a major issue as of commit 4d2c0cda0744, which for 802.3ad bonds, sets slave->link = BOND_LINK_DOWN, with a comment about relying on link monitoring via miimon to set it correctly, but since the miimon work queue never runs, the link just stays marked down. If we simply tweak bond_option_mode_set() slightly, we can check for the non-arp modes having no miimon value set, and insert BOND_DEFAULT_MIIMON, which gets things back in full working order. This problem exists as far back as 4.14, and might be worth fixing in all stable trees since, though the work-around is to simply specify an miimon value yourself. Reported-by: Bob Ball Signed-off-by: Jarod Wilson Acked-by: Mahesh Bandewar Signed-off-by: David S. Miller --- drivers/net/bonding/bond_options.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index 98663c50ded0..4d5d01cb8141 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -743,15 +743,20 @@ const struct bond_option *bond_opt_get(unsigned int option) static int bond_option_mode_set(struct bonding *bond, const struct bond_opt_value *newval) { - if (!bond_mode_uses_arp(newval->value) && bond->params.arp_interval) { - netdev_dbg(bond->dev, "%s mode is incompatible with arp monitoring, start mii monitoring\n", - newval->string); - /* disable arp monitoring */ - bond->params.arp_interval = 0; - /* set miimon to default value */ - bond->params.miimon = BOND_DEFAULT_MIIMON; - netdev_dbg(bond->dev, "Setting MII monitoring interval to %d\n", - bond->params.miimon); + if (!bond_mode_uses_arp(newval->value)) { + if (bond->params.arp_interval) { + netdev_dbg(bond->dev, "%s mode is incompatible with arp monitoring, start mii monitoring\n", + newval->string); + /* disable arp monitoring */ + bond->params.arp_interval = 0; + } + + if (!bond->params.miimon) { + /* set miimon to default value */ + bond->params.miimon = BOND_DEFAULT_MIIMON; + netdev_dbg(bond->dev, "Setting MII monitoring interval to %d\n", + bond->params.miimon); + } } if (newval->value == BOND_MODE_ALB) -- cgit v1.2.3 From 4ad95a93a702ec4f4fb5159b822797ba67b8cbbe Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Wed, 18 Jul 2018 22:50:02 -0700 Subject: qed: Fix link flap issue due to mismatching EEE capabilities. Apparently, MFW publishes EEE capabilities even for Fiber-boards that don't support them, and later since qed internally sets adv_caps it would cause link-flap avoidance (LFA) to fail when driver would initiate the link. This in turn delays the link, causing traffic to fail. Driver has been modified to not to ask MFW for any EEE config if EEE isn't to be enabled. Fixes: 645874e5 ("qed: Add support for Energy efficient ethernet.") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index 9d9e533bccdc..cace28365189 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -1308,9 +1308,15 @@ int qed_mcp_set_link(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, bool b_up) phy_cfg.pause |= (params->pause.forced_tx) ? ETH_PAUSE_TX : 0; phy_cfg.adv_speed = params->speed.advertised_speeds; phy_cfg.loopback_mode = params->loopback_mode; - if (p_hwfn->mcp_info->capabilities & FW_MB_PARAM_FEATURE_SUPPORT_EEE) { - if (params->eee.enable) - phy_cfg.eee_cfg |= EEE_CFG_EEE_ENABLED; + + /* There are MFWs that share this capability regardless of whether + * this is feasible or not. And given that at the very least adv_caps + * would be set internally by qed, we want to make sure LFA would + * still work. + */ + if ((p_hwfn->mcp_info->capabilities & + FW_MB_PARAM_FEATURE_SUPPORT_EEE) && params->eee.enable) { + phy_cfg.eee_cfg |= EEE_CFG_EEE_ENABLED; if (params->eee.tx_lpi_enable) phy_cfg.eee_cfg |= EEE_CFG_TX_LPI; if (params->eee.adv_caps & QED_EEE_1G_ADV) -- cgit v1.2.3 From 58874c7b246109d8efb2b0099d1aa296d6bfc3fa Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Wed, 18 Jul 2018 22:50:03 -0700 Subject: qed: Fix possible race for the link state value. There's a possible race where driver can read link status in mid-transition and see that virtual-link is up yet speed is 0. Since in this mid-transition we're guaranteed to see a mailbox from MFW soon, we can afford to treat this as link down. Fixes: cc875c2e ("qed: Add link support") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index cace28365189..cdd645024a32 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -1211,6 +1211,7 @@ static void qed_mcp_handle_link_change(struct qed_hwfn *p_hwfn, break; default: p_link->speed = 0; + p_link->link_up = 0; } if (p_link->link_up && p_link->speed) -- cgit v1.2.3 From 25c020a90919632b3425c19dc09188d56b9ed59a Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Wed, 18 Jul 2018 22:50:04 -0700 Subject: qed: Correct Multicast API to reflect existence of 256 approximate buckets. FW hsi contains 256 approximation buckets which are split in ramrod into eight u32 values, but driver is using eight 'unsigned long' variables. This patch fixes the mcast logic by making the API utilize u32. Fixes: 83aeb933 ("qed*: Trivial modifications") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 15 +++++++-------- drivers/net/ethernet/qlogic/qed/qed_l2.h | 2 +- drivers/net/ethernet/qlogic/qed/qed_sriov.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_vf.c | 4 ++-- drivers/net/ethernet/qlogic/qed/qed_vf.h | 7 ++++++- 5 files changed, 17 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 99973e10b179..5ede6408649d 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -665,7 +665,7 @@ qed_sp_update_mcast_bin(struct qed_hwfn *p_hwfn, p_ramrod->common.update_approx_mcast_flg = 1; for (i = 0; i < ETH_MULTICAST_MAC_BINS_IN_REGS; i++) { - u32 *p_bins = (u32 *)p_params->bins; + u32 *p_bins = p_params->bins; p_ramrod->approx_mcast.bins[i] = cpu_to_le32(p_bins[i]); } @@ -1476,8 +1476,8 @@ qed_sp_eth_filter_mcast(struct qed_hwfn *p_hwfn, enum spq_mode comp_mode, struct qed_spq_comp_cb *p_comp_data) { - unsigned long bins[ETH_MULTICAST_MAC_BINS_IN_REGS]; struct vport_update_ramrod_data *p_ramrod = NULL; + u32 bins[ETH_MULTICAST_MAC_BINS_IN_REGS]; struct qed_spq_entry *p_ent = NULL; struct qed_sp_init_data init_data; u8 abs_vport_id = 0; @@ -1513,26 +1513,25 @@ qed_sp_eth_filter_mcast(struct qed_hwfn *p_hwfn, /* explicitly clear out the entire vector */ memset(&p_ramrod->approx_mcast.bins, 0, sizeof(p_ramrod->approx_mcast.bins)); - memset(bins, 0, sizeof(unsigned long) * - ETH_MULTICAST_MAC_BINS_IN_REGS); + memset(bins, 0, sizeof(bins)); /* filter ADD op is explicit set op and it removes * any existing filters for the vport */ if (p_filter_cmd->opcode == QED_FILTER_ADD) { for (i = 0; i < p_filter_cmd->num_mc_addrs; i++) { - u32 bit; + u32 bit, nbits; bit = qed_mcast_bin_from_mac(p_filter_cmd->mac[i]); - __set_bit(bit, bins); + nbits = sizeof(u32) * BITS_PER_BYTE; + bins[bit / nbits] |= 1 << (bit % nbits); } /* Convert to correct endianity */ for (i = 0; i < ETH_MULTICAST_MAC_BINS_IN_REGS; i++) { struct vport_update_ramrod_mcast *p_ramrod_bins; - u32 *p_bins = (u32 *)bins; p_ramrod_bins = &p_ramrod->approx_mcast; - p_ramrod_bins->bins[i] = cpu_to_le32(p_bins[i]); + p_ramrod_bins->bins[i] = cpu_to_le32(bins[i]); } } diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.h b/drivers/net/ethernet/qlogic/qed/qed_l2.h index 806a8da257e9..8d80f1095d17 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.h +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.h @@ -215,7 +215,7 @@ struct qed_sp_vport_update_params { u8 anti_spoofing_en; u8 update_accept_any_vlan_flg; u8 accept_any_vlan; - unsigned long bins[8]; + u32 bins[8]; struct qed_rss_params *rss_params; struct qed_filter_accept_flags accept_flags; struct qed_sge_tpa_params *sge_tpa_params; diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c index fd59cf45f4be..26e918d7f2f9 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c @@ -2831,7 +2831,7 @@ qed_iov_vp_update_mcast_bin_param(struct qed_hwfn *p_hwfn, p_data->update_approx_mcast_flg = 1; memcpy(p_data->bins, p_mcast_tlv->bins, - sizeof(unsigned long) * ETH_MULTICAST_MAC_BINS_IN_REGS); + sizeof(u32) * ETH_MULTICAST_MAC_BINS_IN_REGS); *tlvs_mask |= 1 << QED_IOV_VP_UPDATE_MCAST; } diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.c b/drivers/net/ethernet/qlogic/qed/qed_vf.c index 2d7fcd6a0777..be6ddde1a104 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_vf.c +++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c @@ -1126,7 +1126,7 @@ int qed_vf_pf_vport_update(struct qed_hwfn *p_hwfn, resp_size += sizeof(struct pfvf_def_resp_tlv); memcpy(p_mcast_tlv->bins, p_params->bins, - sizeof(unsigned long) * ETH_MULTICAST_MAC_BINS_IN_REGS); + sizeof(u32) * ETH_MULTICAST_MAC_BINS_IN_REGS); } update_rx = p_params->accept_flags.update_rx_mode_config; @@ -1272,7 +1272,7 @@ void qed_vf_pf_filter_mcast(struct qed_hwfn *p_hwfn, u32 bit; bit = qed_mcast_bin_from_mac(p_filter_cmd->mac[i]); - __set_bit(bit, sp_params.bins); + sp_params.bins[bit / 32] |= 1 << (bit % 32); } } diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.h b/drivers/net/ethernet/qlogic/qed/qed_vf.h index 4f05d5eb3cf5..033409db86ae 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_vf.h +++ b/drivers/net/ethernet/qlogic/qed/qed_vf.h @@ -392,7 +392,12 @@ struct vfpf_vport_update_mcast_bin_tlv { struct channel_tlv tl; u8 padding[4]; - u64 bins[8]; + /* There are only 256 approx bins, and in HSI they're divided into + * 32-bit values. As old VFs used to set-bit to the values on its side, + * the upper half of the array is never expected to contain any data. + */ + u64 bins[4]; + u64 obsolete_bins[4]; }; struct vfpf_vport_update_accept_param_tlv { -- cgit v1.2.3 From 215d08a85b9acf5e1fe9dbf50f1774cde333efef Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Thu, 19 Jul 2018 08:15:16 +0200 Subject: net: phy: consider PHY_IGNORE_INTERRUPT in phy_start_aneg_priv The situation described in the comment can occur also with PHY_IGNORE_INTERRUPT, therefore change the condition to include it. Fixes: f555f34fdc58 ("net: phy: fix auto-negotiation stall due to unavailable interrupt") Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 537297d2b4b4..6c9b24fe3148 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -514,7 +514,7 @@ static int phy_start_aneg_priv(struct phy_device *phydev, bool sync) * negotiation may already be done and aneg interrupt may not be * generated. */ - if (phy_interrupt_is_valid(phydev) && (phydev->state == PHY_AN)) { + if (phydev->irq != PHY_POLL && phydev->state == PHY_AN) { err = phy_aneg_done(phydev); if (err > 0) { trigger = true; -- cgit v1.2.3 From 3d82475ad46c0b65f2618b5f2bbb4cadbb5ac5d8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 20 Jul 2018 11:53:15 +0200 Subject: net: dsa: mv88e6xxx: fix races between lock and irq freeing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit free_irq() waits until all handlers for this IRQ have completed. As the relevant handler (mv88e6xxx_g1_irq_thread_fn()) takes the chip's reg_lock it might never return if the thread calling free_irq() holds this lock. For the same reason kthread_cancel_delayed_work_sync() in the polling case must not hold this lock. Also first free the irq (or stop the worker respectively) such that mv88e6xxx_g1_irq_thread_work() isn't called any more before the irq mappings are dropped in mv88e6xxx_g1_irq_free_common() to prevent the worker thread to call handle_nested_irq(0) which results in a NULL-pointer exception. Signed-off-by: Uwe Kleine-König Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 437cd6eb4faa..9ef07a06aceb 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -343,6 +343,7 @@ static const struct irq_domain_ops mv88e6xxx_g1_irq_domain_ops = { .xlate = irq_domain_xlate_twocell, }; +/* To be called with reg_lock held */ static void mv88e6xxx_g1_irq_free_common(struct mv88e6xxx_chip *chip) { int irq, virq; @@ -362,9 +363,15 @@ static void mv88e6xxx_g1_irq_free_common(struct mv88e6xxx_chip *chip) static void mv88e6xxx_g1_irq_free(struct mv88e6xxx_chip *chip) { - mv88e6xxx_g1_irq_free_common(chip); - + /* + * free_irq must be called without reg_lock taken because the irq + * handler takes this lock, too. + */ free_irq(chip->irq, chip); + + mutex_lock(&chip->reg_lock); + mv88e6xxx_g1_irq_free_common(chip); + mutex_unlock(&chip->reg_lock); } static int mv88e6xxx_g1_irq_setup_common(struct mv88e6xxx_chip *chip) @@ -469,10 +476,12 @@ static int mv88e6xxx_irq_poll_setup(struct mv88e6xxx_chip *chip) static void mv88e6xxx_irq_poll_free(struct mv88e6xxx_chip *chip) { - mv88e6xxx_g1_irq_free_common(chip); - kthread_cancel_delayed_work_sync(&chip->irq_poll_work); kthread_destroy_worker(chip->kworker); + + mutex_lock(&chip->reg_lock); + mv88e6xxx_g1_irq_free_common(chip); + mutex_unlock(&chip->reg_lock); } int mv88e6xxx_wait(struct mv88e6xxx_chip *chip, int addr, int reg, u16 mask) @@ -4506,12 +4515,10 @@ out_g2_irq: if (chip->info->g2_irqs > 0) mv88e6xxx_g2_irq_free(chip); out_g1_irq: - mutex_lock(&chip->reg_lock); if (chip->irq > 0) mv88e6xxx_g1_irq_free(chip); else mv88e6xxx_irq_poll_free(chip); - mutex_unlock(&chip->reg_lock); out: if (pdata) dev_put(pdata->netdev); @@ -4539,12 +4546,10 @@ static void mv88e6xxx_remove(struct mdio_device *mdiodev) if (chip->info->g2_irqs > 0) mv88e6xxx_g2_irq_free(chip); - mutex_lock(&chip->reg_lock); if (chip->irq > 0) mv88e6xxx_g1_irq_free(chip); else mv88e6xxx_irq_poll_free(chip); - mutex_unlock(&chip->reg_lock); } static const struct of_device_id mv88e6xxx_of_match[] = { -- cgit v1.2.3 From 6e56830776828d8ca9897fc4429eeab47c3bb432 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 20 Jul 2018 19:30:57 +0200 Subject: atl1c: reserve min skb headroom Got crash report with following backtrace: BUG: unable to handle kernel paging request at ffff8801869daffe RIP: 0010:[] [] ip6_finish_output2+0x394/0x4c0 RSP: 0018:ffff880186c83a98 EFLAGS: 00010283 RAX: ffff8801869db00e ... [] ip6_finish_output+0x8c/0xf0 [] ip6_output+0x57/0x100 [] ip6_forward+0x4b9/0x840 [] ip6_rcv_finish+0x66/0xc0 [] ipv6_rcv+0x319/0x530 [] netif_receive_skb+0x1c/0x70 [] atl1c_clean+0x1ec/0x310 [atl1c] ... The bad access is in neigh_hh_output(), at skb->data - 16 (HH_DATA_MOD). atl1c driver provided skb with no headroom, so 14 bytes (ethernet header) got pulled, but then 16 are copied. Reserve NET_SKB_PAD bytes headroom, like netdev_alloc_skb(). Compile tested only; I lack hardware. Fixes: 7b7017642199 ("atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring") Signed-off-by: Florian Westphal Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 94270f654b3b..7087b88550db 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -1686,6 +1686,7 @@ static struct sk_buff *atl1c_alloc_skb(struct atl1c_adapter *adapter) skb = build_skb(page_address(page) + adapter->rx_page_offset, adapter->rx_frag_size); if (likely(skb)) { + skb_reserve(skb, NET_SKB_PAD); adapter->rx_page_offset += adapter->rx_frag_size; if (adapter->rx_page_offset >= PAGE_SIZE) adapter->rx_page = NULL; -- cgit v1.2.3 From 7431016b107c95cb5b2014aa1901fcb115f746bc Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Fri, 20 Jul 2018 13:21:02 -0700 Subject: vxlan: add new fdb alloc and create helpers - Add new vxlan_fdb_alloc helper - rename existing vxlan_fdb_create into vxlan_fdb_update: because it really creates or updates an existing fdb entry - move new fdb creation into a separate vxlan_fdb_create Main motivation for this change is to introduce the ability to decouple vxlan fdb creation and notify, used in a later patch. Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 91 ++++++++++++++++++++++++++++++++++++----------------- 1 file changed, 62 insertions(+), 29 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index f6bb1d54d4bd..c8d5bfffadef 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -636,8 +636,61 @@ static int vxlan_gro_complete(struct sock *sk, struct sk_buff *skb, int nhoff) return eth_gro_complete(skb, nhoff + sizeof(struct vxlanhdr)); } -/* Add new entry to forwarding table -- assumes lock held */ +static struct vxlan_fdb *vxlan_fdb_alloc(struct vxlan_dev *vxlan, + const u8 *mac, __u16 state, + __be32 src_vni, __u8 ndm_flags) +{ + struct vxlan_fdb *f; + + f = kmalloc(sizeof(*f), GFP_ATOMIC); + if (!f) + return NULL; + f->state = state; + f->flags = ndm_flags; + f->updated = f->used = jiffies; + f->vni = src_vni; + INIT_LIST_HEAD(&f->remotes); + memcpy(f->eth_addr, mac, ETH_ALEN); + + return f; +} + static int vxlan_fdb_create(struct vxlan_dev *vxlan, + const u8 *mac, union vxlan_addr *ip, + __u16 state, __be16 port, __be32 src_vni, + __be32 vni, __u32 ifindex, __u8 ndm_flags, + struct vxlan_fdb **fdb) +{ + struct vxlan_rdst *rd = NULL; + struct vxlan_fdb *f; + int rc; + + if (vxlan->cfg.addrmax && + vxlan->addrcnt >= vxlan->cfg.addrmax) + return -ENOSPC; + + netdev_dbg(vxlan->dev, "add %pM -> %pIS\n", mac, ip); + f = vxlan_fdb_alloc(vxlan, mac, state, src_vni, ndm_flags); + if (!f) + return -ENOMEM; + + rc = vxlan_fdb_append(f, ip, port, vni, ifindex, &rd); + if (rc < 0) { + kfree(f); + return rc; + } + + ++vxlan->addrcnt; + hlist_add_head_rcu(&f->hlist, + vxlan_fdb_head(vxlan, mac, src_vni)); + + *fdb = f; + + return 0; +} + +/* Add new entry to forwarding table -- assumes lock held */ +static int vxlan_fdb_update(struct vxlan_dev *vxlan, const u8 *mac, union vxlan_addr *ip, __u16 state, __u16 flags, __be16 port, __be32 src_vni, __be32 vni, @@ -687,37 +740,17 @@ static int vxlan_fdb_create(struct vxlan_dev *vxlan, if (!(flags & NLM_F_CREATE)) return -ENOENT; - if (vxlan->cfg.addrmax && - vxlan->addrcnt >= vxlan->cfg.addrmax) - return -ENOSPC; - /* Disallow replace to add a multicast entry */ if ((flags & NLM_F_REPLACE) && (is_multicast_ether_addr(mac) || is_zero_ether_addr(mac))) return -EOPNOTSUPP; netdev_dbg(vxlan->dev, "add %pM -> %pIS\n", mac, ip); - f = kmalloc(sizeof(*f), GFP_ATOMIC); - if (!f) - return -ENOMEM; - - notify = 1; - f->state = state; - f->flags = ndm_flags; - f->updated = f->used = jiffies; - f->vni = src_vni; - INIT_LIST_HEAD(&f->remotes); - memcpy(f->eth_addr, mac, ETH_ALEN); - - rc = vxlan_fdb_append(f, ip, port, vni, ifindex, &rd); - if (rc < 0) { - kfree(f); + rc = vxlan_fdb_create(vxlan, mac, ip, state, port, src_vni, + vni, ifindex, ndm_flags, &f); + if (rc < 0) return rc; - } - - ++vxlan->addrcnt; - hlist_add_head_rcu(&f->hlist, - vxlan_fdb_head(vxlan, mac, src_vni)); + notify = 1; } if (notify) { @@ -863,7 +896,7 @@ static int vxlan_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], return -EAFNOSUPPORT; spin_lock_bh(&vxlan->hash_lock); - err = vxlan_fdb_create(vxlan, addr, &ip, ndm->ndm_state, flags, + err = vxlan_fdb_update(vxlan, addr, &ip, ndm->ndm_state, flags, port, src_vni, vni, ifindex, ndm->ndm_flags); spin_unlock_bh(&vxlan->hash_lock); @@ -1006,7 +1039,7 @@ static bool vxlan_snoop(struct net_device *dev, /* close off race between vxlan_flush and incoming packets */ if (netif_running(dev)) - vxlan_fdb_create(vxlan, src_mac, src_ip, + vxlan_fdb_update(vxlan, src_mac, src_ip, NUD_REACHABLE, NLM_F_EXCL|NLM_F_CREATE, vxlan->cfg.dst_port, @@ -3170,7 +3203,7 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev, /* create an fdb entry for a valid default destination */ if (!vxlan_addr_any(&vxlan->default_dst.remote_ip)) { - err = vxlan_fdb_create(vxlan, all_zeros_mac, + err = vxlan_fdb_update(vxlan, all_zeros_mac, &vxlan->default_dst.remote_ip, NUD_REACHABLE | NUD_PERMANENT, NLM_F_EXCL | NLM_F_CREATE, @@ -3450,7 +3483,7 @@ static int vxlan_changelink(struct net_device *dev, struct nlattr *tb[], old_dst.remote_ifindex, 0); if (!vxlan_addr_any(&dst->remote_ip)) { - err = vxlan_fdb_create(vxlan, all_zeros_mac, + err = vxlan_fdb_update(vxlan, all_zeros_mac, &dst->remote_ip, NUD_REACHABLE | NUD_PERMANENT, NLM_F_CREATE | NLM_F_APPEND, -- cgit v1.2.3 From f6e053858671bb156b6e44ad66418acc8c7f4e77 Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Fri, 20 Jul 2018 13:21:03 -0700 Subject: vxlan: make netlink notify in vxlan_fdb_destroy optional Add a new option do_notify to vxlan_fdb_destroy to make sending netlink notify optional. Used by a later patch. Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index c8d5bfffadef..a7e9a4dc0636 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -774,13 +774,15 @@ static void vxlan_fdb_free(struct rcu_head *head) kfree(f); } -static void vxlan_fdb_destroy(struct vxlan_dev *vxlan, struct vxlan_fdb *f) +static void vxlan_fdb_destroy(struct vxlan_dev *vxlan, struct vxlan_fdb *f, + bool do_notify) { netdev_dbg(vxlan->dev, "delete %pM\n", f->eth_addr); --vxlan->addrcnt; - vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f), RTM_DELNEIGH); + if (do_notify) + vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f), RTM_DELNEIGH); hlist_del_rcu(&f->hlist); call_rcu(&f->rcu, vxlan_fdb_free); @@ -930,7 +932,7 @@ static int __vxlan_fdb_delete(struct vxlan_dev *vxlan, goto out; } - vxlan_fdb_destroy(vxlan, f); + vxlan_fdb_destroy(vxlan, f, true); out: return 0; @@ -2397,7 +2399,7 @@ static void vxlan_cleanup(struct timer_list *t) "garbage collect %pM\n", f->eth_addr); f->state = NUD_STALE; - vxlan_fdb_destroy(vxlan, f); + vxlan_fdb_destroy(vxlan, f, true); } else if (time_before(timeout, next_timer)) next_timer = timeout; } @@ -2448,7 +2450,7 @@ static void vxlan_fdb_delete_default(struct vxlan_dev *vxlan, __be32 vni) spin_lock_bh(&vxlan->hash_lock); f = __vxlan_find_mac(vxlan, all_zeros_mac, vni); if (f) - vxlan_fdb_destroy(vxlan, f); + vxlan_fdb_destroy(vxlan, f, true); spin_unlock_bh(&vxlan->hash_lock); } @@ -2502,7 +2504,7 @@ static void vxlan_flush(struct vxlan_dev *vxlan, bool do_all) continue; /* the all_zeros_mac entry is deleted at vxlan_uninit */ if (!is_zero_ether_addr(f->eth_addr)) - vxlan_fdb_destroy(vxlan, f); + vxlan_fdb_destroy(vxlan, f, true); } } spin_unlock_bh(&vxlan->hash_lock); -- cgit v1.2.3 From e99465b952861533d9ba748fdbecc96d9a36da3e Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Fri, 20 Jul 2018 13:21:04 -0700 Subject: vxlan: fix default fdb entry netlink notify ordering during netdev create Problem: In vxlan_newlink, a default fdb entry is added before register_netdev. The default fdb creation function also notifies user-space of the fdb entry on the vxlan device which user-space does not know about yet. (RTM_NEWNEIGH goes before RTM_NEWLINK for the same ifindex). This patch fixes the user-space netlink notification ordering issue with the following changes: - decouple fdb notify from fdb create. - Move fdb notify after register_netdev. - Call rtnl_configure_link in vxlan newlink handler to notify userspace about the newlink before fdb notify and hence avoiding the user-space race. Fixes: afbd8bae9c79 ("vxlan: add implicit fdb entry for default destination") Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index a7e9a4dc0636..e857cb3335f6 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -3195,6 +3195,7 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev, { struct vxlan_net *vn = net_generic(net, vxlan_net_id); struct vxlan_dev *vxlan = netdev_priv(dev); + struct vxlan_fdb *f = NULL; int err; err = vxlan_dev_configure(net, dev, conf, false, extack); @@ -3205,27 +3206,38 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev, /* create an fdb entry for a valid default destination */ if (!vxlan_addr_any(&vxlan->default_dst.remote_ip)) { - err = vxlan_fdb_update(vxlan, all_zeros_mac, + err = vxlan_fdb_create(vxlan, all_zeros_mac, &vxlan->default_dst.remote_ip, NUD_REACHABLE | NUD_PERMANENT, - NLM_F_EXCL | NLM_F_CREATE, vxlan->cfg.dst_port, vxlan->default_dst.remote_vni, vxlan->default_dst.remote_vni, vxlan->default_dst.remote_ifindex, - NTF_SELF); + NTF_SELF, &f); if (err) return err; } err = register_netdevice(dev); + if (err) + goto errout; + + err = rtnl_configure_link(dev, NULL); if (err) { - vxlan_fdb_delete_default(vxlan, vxlan->default_dst.remote_vni); - return err; + unregister_netdevice(dev); + goto errout; } + /* notify default fdb entry */ + if (f) + vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f), RTM_NEWNEIGH); + list_add(&vxlan->next, &vn->vxlan_list); return 0; +errout: + if (f) + vxlan_fdb_destroy(vxlan, f, false); + return err; } static int vxlan_nl2conf(struct nlattr *tb[], struct nlattr *data[], @@ -3460,6 +3472,7 @@ static int vxlan_changelink(struct net_device *dev, struct nlattr *tb[], struct vxlan_rdst *dst = &vxlan->default_dst; struct vxlan_rdst old_dst; struct vxlan_config conf; + struct vxlan_fdb *f = NULL; int err; err = vxlan_nl2conf(tb, data, @@ -3485,19 +3498,19 @@ static int vxlan_changelink(struct net_device *dev, struct nlattr *tb[], old_dst.remote_ifindex, 0); if (!vxlan_addr_any(&dst->remote_ip)) { - err = vxlan_fdb_update(vxlan, all_zeros_mac, + err = vxlan_fdb_create(vxlan, all_zeros_mac, &dst->remote_ip, NUD_REACHABLE | NUD_PERMANENT, - NLM_F_CREATE | NLM_F_APPEND, vxlan->cfg.dst_port, dst->remote_vni, dst->remote_vni, dst->remote_ifindex, - NTF_SELF); + NTF_SELF, &f); if (err) { spin_unlock_bh(&vxlan->hash_lock); return err; } + vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f), RTM_NEWNEIGH); } spin_unlock_bh(&vxlan->hash_lock); } -- cgit v1.2.3 From b809ec869b2cf2af053ffd99e5a46ab600e94aa2 Mon Sep 17 00:00:00 2001 From: John Hurley Date: Fri, 20 Jul 2018 21:07:54 -0700 Subject: nfp: flower: ensure dead neighbour entries are not offloaded Previously only the neighbour state was checked to decide if an offloaded entry should be removed. However, there can be situations when the entry is dead but still marked as valid. This can lead to dead entries not being removed from fw tables or even incorrect data being added. Check the entry dead bit before deciding if it should be added to or removed from fw neighbour tables. Fixes: 8e6a9046b66a ("nfp: flower vxlan neighbour offload") Signed-off-by: John Hurley Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c index 78afe75129ab..382bb93cb090 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c +++ b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c @@ -317,7 +317,7 @@ nfp_tun_write_neigh(struct net_device *netdev, struct nfp_app *app, payload.dst_ipv4 = flow->daddr; /* If entry has expired send dst IP with all other fields 0. */ - if (!(neigh->nud_state & NUD_VALID)) { + if (!(neigh->nud_state & NUD_VALID) || neigh->dead) { nfp_tun_del_route_from_cache(app, payload.dst_ipv4); /* Trigger ARP to verify invalid neighbour state. */ neigh_event_send(neigh, NULL); -- cgit v1.2.3 From c9ce1fa1c24b08e13c2a3b5b1f94a19c9eaa982c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 21 Jul 2018 12:59:25 -0700 Subject: net: prevent ISA drivers from building on PPC32 Prevent drivers from building on PPC32 if they use isa_bus_to_virt(), isa_virt_to_bus(), or isa_page_to_bus(), which are not available and thus cause build errors. ../drivers/net/ethernet/3com/3c515.c: In function 'corkscrew_open': ../drivers/net/ethernet/3com/3c515.c:824:9: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/amd/lance.c: In function 'lance_rx': ../drivers/net/ethernet/amd/lance.c:1203:23: error: implicit declaration of function 'isa_bus_to_virt'; did you mean 'bus_to_virt'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/amd/ni65.c: In function 'ni65_init_lance': ../drivers/net/ethernet/amd/ni65.c:585:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/cirrus/cs89x0.c: In function 'net_open': ../drivers/net/ethernet/cirrus/cs89x0.c:897:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] Signed-off-by: Randy Dunlap Suggested-by: Michael Ellerman Signed-off-by: David S. Miller --- drivers/net/ethernet/3com/Kconfig | 2 +- drivers/net/ethernet/amd/Kconfig | 4 ++-- drivers/net/ethernet/cirrus/Kconfig | 1 + 3 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig index 5b7658bcf020..5c3ef9fc8207 100644 --- a/drivers/net/ethernet/3com/Kconfig +++ b/drivers/net/ethernet/3com/Kconfig @@ -32,7 +32,7 @@ config EL3 config 3C515 tristate "3c515 ISA \"Fast EtherLink\"" - depends on ISA && ISA_DMA_API + depends on ISA && ISA_DMA_API && !PPC32 ---help--- If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet network card, say Y here. diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index f273af136fc7..9e5cf5583c87 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -44,7 +44,7 @@ config AMD8111_ETH config LANCE tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" - depends on ISA && ISA_DMA_API && !ARM + depends on ISA && ISA_DMA_API && !ARM && !PPC32 ---help--- If you have a network (Ethernet) card of this type, say Y here. Some LinkSys cards are of this type. @@ -138,7 +138,7 @@ config PCMCIA_NMCLAN config NI65 tristate "NI6510 support" - depends on ISA && ISA_DMA_API && !ARM + depends on ISA && ISA_DMA_API && !ARM && !PPC32 ---help--- If you have a network (Ethernet) card of this type, say Y here. diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig index 5ab912937aff..ec0b545197e2 100644 --- a/drivers/net/ethernet/cirrus/Kconfig +++ b/drivers/net/ethernet/cirrus/Kconfig @@ -19,6 +19,7 @@ if NET_VENDOR_CIRRUS config CS89x0 tristate "CS89x0 support" depends on ISA || EISA || ARM + depends on !PPC32 ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the file -- cgit v1.2.3 From 5d4c94ed9f564224d7b37dbee13f7c5d4a8a01ac Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Thu, 21 Jun 2018 15:23:31 +0200 Subject: can: peak_canfd: fix firmware < v3.3.0: limit allocation to 32-bit DMA addr only The DMA logic in firmwares < v3.3.0 embedded in the PCAN-PCIe FD cards family is not capable of handling a mix of 32-bit and 64-bit logical addresses. If the board is equipped with 2 or 4 CAN ports, then such a situation might lead to a PCIe Bus Error "Malformed TLP" packet as well as "irq xx: nobody cared" issue. This patch adds a workaround that requests only 32-bit DMA addresses when these might be allocated outside of the 4 GB area. This issue has been fixed in firmware v3.3.0 and next. Signed-off-by: Stephane Grosjean Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/peak_canfd/peak_pciefd_main.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/can/peak_canfd/peak_pciefd_main.c b/drivers/net/can/peak_canfd/peak_pciefd_main.c index b9e28578bc7b..455a3797a200 100644 --- a/drivers/net/can/peak_canfd/peak_pciefd_main.c +++ b/drivers/net/can/peak_canfd/peak_pciefd_main.c @@ -58,6 +58,10 @@ MODULE_LICENSE("GPL v2"); #define PCIEFD_REG_SYS_VER1 0x0040 /* version reg #1 */ #define PCIEFD_REG_SYS_VER2 0x0044 /* version reg #2 */ +#define PCIEFD_FW_VERSION(x, y, z) (((u32)(x) << 24) | \ + ((u32)(y) << 16) | \ + ((u32)(z) << 8)) + /* System Control Registers Bits */ #define PCIEFD_SYS_CTL_TS_RST 0x00000001 /* timestamp clock */ #define PCIEFD_SYS_CTL_CLK_EN 0x00000002 /* system clock */ @@ -782,6 +786,21 @@ static int peak_pciefd_probe(struct pci_dev *pdev, "%ux CAN-FD PCAN-PCIe FPGA v%u.%u.%u:\n", can_count, hw_ver_major, hw_ver_minor, hw_ver_sub); +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT + /* FW < v3.3.0 DMA logic doesn't handle correctly the mix of 32-bit and + * 64-bit logical addresses: this workaround forces usage of 32-bit + * DMA addresses only when such a fw is detected. + */ + if (PCIEFD_FW_VERSION(hw_ver_major, hw_ver_minor, hw_ver_sub) < + PCIEFD_FW_VERSION(3, 3, 0)) { + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (err) + dev_warn(&pdev->dev, + "warning: can't set DMA mask %llxh (err %d)\n", + DMA_BIT_MASK(32), err); + } +#endif + /* stop system clock */ pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_CLK_EN, PCIEFD_REG_SYS_CTL_CLR); -- cgit v1.2.3 From 393753b217f05474e714aea36c37501546ed1202 Mon Sep 17 00:00:00 2001 From: Roman Fietze Date: Wed, 11 Jul 2018 15:36:14 +0200 Subject: can: m_can.c: fix setup of CCCR register: clear CCCR NISO bit before checking can.ctrlmode Inside m_can_chip_config(), when setting up the new value of the CCCR, the CCCR_NISO bit is not cleared like the others, CCCR_TEST, CCCR_MON, CCCR_BRSE and CCCR_FDOE, before checking the can.ctrlmode bits for CAN_CTRLMODE_FD_NON_ISO. This way once the controller was configured for CAN_CTRLMODE_FD_NON_ISO, this mode could never be cleared again. This fix is only relevant for controllers with version 3.1.x or 3.2.x. Older versions do not support NISO. Signed-off-by: Roman Fietze Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index b397a33f3d32..8e2b7f873c4d 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -1109,7 +1109,8 @@ static void m_can_chip_config(struct net_device *dev) } else { /* Version 3.1.x or 3.2.x */ - cccr &= ~(CCCR_TEST | CCCR_MON | CCCR_BRSE | CCCR_FDOE); + cccr &= ~(CCCR_TEST | CCCR_MON | CCCR_BRSE | CCCR_FDOE | + CCCR_NISO); /* Only 3.2.x has NISO Bit implemented */ if (priv->can.ctrlmode & CAN_CTRLMODE_FD_NON_ISO) -- cgit v1.2.3 From b5c1a23b17e563b656cc9bb76ce5323b997d90e8 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Mon, 9 Jul 2018 21:16:40 +0200 Subject: can: mpc5xxx_can: check of_iomap return before use of_iomap() can return NULL so that return needs to be checked and NULL treated as failure. While at it also take care of the missing of_node_put() in the error path. Signed-off-by: Nicholas Mc Guire Fixes: commit afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by: Marc Kleine-Budde --- drivers/net/can/mscan/mpc5xxx_can.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c index c7427bdd3a4b..2949a381a94d 100644 --- a/drivers/net/can/mscan/mpc5xxx_can.c +++ b/drivers/net/can/mscan/mpc5xxx_can.c @@ -86,6 +86,11 @@ static u32 mpc52xx_can_get_clock(struct platform_device *ofdev, return 0; } cdm = of_iomap(np_cdm, 0); + if (!cdm) { + of_node_put(np_cdm); + dev_err(&ofdev->dev, "can't map clock node!\n"); + return 0; + } if (in_8(&cdm->ipb_clk_sel) & 0x1) freq *= 2; -- cgit v1.2.3 From 1675bee3e732c2449e792feed9caff804f3bd42c Mon Sep 17 00:00:00 2001 From: Faiz Abbas Date: Tue, 3 Jul 2018 16:41:02 +0530 Subject: can: m_can: Fix runtime resume call pm_runtime_get_sync() returns a 1 if the state of the device is already 'active'. This is not a failure case and should return a success. Therefore fix error handling for pm_runtime_get_sync() call such that it returns success when the value is 1. Also cleanup the TODO for using runtime PM for sleep mode as that is implemented. Signed-off-by: Faiz Abbas Cc: --- drivers/net/can/m_can/m_can.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index 8e2b7f873c4d..e2f965c2e3aa 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -634,10 +634,12 @@ static int m_can_clk_start(struct m_can_priv *priv) int err; err = pm_runtime_get_sync(priv->device); - if (err) + if (err < 0) { pm_runtime_put_noidle(priv->device); + return err; + } - return err; + return 0; } static void m_can_clk_stop(struct m_can_priv *priv) @@ -1688,8 +1690,6 @@ failed_ret: return ret; } -/* TODO: runtime PM with power down or sleep mode */ - static __maybe_unused int m_can_suspend(struct device *dev) { struct net_device *ndev = dev_get_drvdata(dev); -- cgit v1.2.3 From 54e4a0c486041dc1c20593d997fafd67089e8408 Mon Sep 17 00:00:00 2001 From: Faiz Abbas Date: Tue, 3 Jul 2018 16:47:10 +0530 Subject: can: m_can: Move accessing of message ram to after clocks are enabled MCAN message ram should only be accessed once clocks are enabled. Therefore, move the call to parse/init the message ram to after clocks are enabled. Signed-off-by: Faiz Abbas Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index e2f965c2e3aa..9b449400376b 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -1645,8 +1645,6 @@ static int m_can_plat_probe(struct platform_device *pdev) priv->can.clock.freq = clk_get_rate(cclk); priv->mram_base = mram_addr; - m_can_of_parse_mram(priv, mram_config_vals); - platform_set_drvdata(pdev, dev); SET_NETDEV_DEV(dev, &pdev->dev); @@ -1669,6 +1667,8 @@ static int m_can_plat_probe(struct platform_device *pdev) goto clk_disable; } + m_can_of_parse_mram(priv, mram_config_vals); + devm_can_led_init(dev); of_can_transceiver(dev); @@ -1716,8 +1716,6 @@ static __maybe_unused int m_can_resume(struct device *dev) pinctrl_pm_select_default_state(dev); - m_can_init_ram(priv); - priv->can.state = CAN_STATE_ERROR_ACTIVE; if (netif_running(ndev)) { @@ -1727,6 +1725,7 @@ static __maybe_unused int m_can_resume(struct device *dev) if (ret) return ret; + m_can_init_ram(priv); m_can_start(ndev); netif_device_attach(ndev); netif_start_queue(ndev); -- cgit v1.2.3 From 2574fe54515ed3487405de329e4e9f13d7098c10 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Tue, 7 Feb 2017 13:23:04 +0200 Subject: can: xilinx_can: fix device dropping off bus on RX overrun The xilinx_can driver performs a software reset when an RX overrun is detected. This causes the device to enter Configuration mode where no messages are received or transmitted. The documentation does not mention any need to perform a reset on an RX overrun, and testing by inducing an RX overflow also indicated that the device continues to work just fine without a reset. Remove the software reset. Tested with the integrated CAN on Zynq-7000 SoC. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Signed-off-by: Anssi Hannula Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 89aec07c225f..389a9603db8c 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -600,7 +600,6 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr) if (isr & XCAN_IXR_RXOFLW_MASK) { stats->rx_over_errors++; stats->rx_errors++; - priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK); if (skb) { cf->can_id |= CAN_ERR_CRTL; cf->data[1] |= CAN_ERR_CRTL_RX_OVERFLOW; -- cgit v1.2.3 From 32852c561bffd613d4ed7ec464b1e03e1b7b6c5c Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Tue, 7 Feb 2017 17:01:14 +0200 Subject: can: xilinx_can: fix RX loop if RXNEMP is asserted without RXOK If the device gets into a state where RXNEMP (RX FIFO not empty) interrupt is asserted without RXOK (new frame received successfully) interrupt being asserted, xcan_rx_poll() will continue to try to clear RXNEMP without actually reading frames from RX FIFO. If the RX FIFO is not empty, the interrupt will not be cleared and napi_schedule() will just be called again. This situation can occur when: (a) xcan_rx() returns without reading RX FIFO due to an error condition. The code tries to clear both RXOK and RXNEMP but RXNEMP will not clear due to a frame still being in the FIFO. The frame will never be read from the FIFO as RXOK is no longer set. (b) A frame is received between xcan_rx_poll() reading interrupt status and clearing RXOK. RXOK will be cleared, but RXNEMP will again remain set as the new message is still in the FIFO. I'm able to trigger case (b) by flooding the bus with frames under load. There does not seem to be any benefit in using both RXNEMP and RXOK in the way the driver does, and the polling example in the reference manual (UG585 v1.10 18.3.7 Read Messages from RxFIFO) also says that either RXOK or RXNEMP can be used for detecting incoming messages. Fix the issue and simplify the RX processing by only using RXNEMP without RXOK. Tested with the integrated CAN on Zynq-7000 SoC. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Signed-off-by: Anssi Hannula Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 389a9603db8c..1bda47aa62f5 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -101,7 +101,7 @@ enum xcan_reg { #define XCAN_INTR_ALL (XCAN_IXR_TXOK_MASK | XCAN_IXR_BSOFF_MASK |\ XCAN_IXR_WKUP_MASK | XCAN_IXR_SLP_MASK | \ XCAN_IXR_RXNEMP_MASK | XCAN_IXR_ERROR_MASK | \ - XCAN_IXR_ARBLST_MASK | XCAN_IXR_RXOK_MASK) + XCAN_IXR_ARBLST_MASK) /* CAN register bit shift - XCAN___SHIFT */ #define XCAN_BTR_SJW_SHIFT 7 /* Synchronous jump width */ @@ -708,15 +708,7 @@ static int xcan_rx_poll(struct napi_struct *napi, int quota) isr = priv->read_reg(priv, XCAN_ISR_OFFSET); while ((isr & XCAN_IXR_RXNEMP_MASK) && (work_done < quota)) { - if (isr & XCAN_IXR_RXOK_MASK) { - priv->write_reg(priv, XCAN_ICR_OFFSET, - XCAN_IXR_RXOK_MASK); - work_done += xcan_rx(ndev); - } else { - priv->write_reg(priv, XCAN_ICR_OFFSET, - XCAN_IXR_RXNEMP_MASK); - break; - } + work_done += xcan_rx(ndev); priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_RXNEMP_MASK); isr = priv->read_reg(priv, XCAN_ISR_OFFSET); } @@ -727,7 +719,7 @@ static int xcan_rx_poll(struct napi_struct *napi, int quota) if (work_done < quota) { napi_complete_done(napi, work_done); ier = priv->read_reg(priv, XCAN_IER_OFFSET); - ier |= (XCAN_IXR_RXOK_MASK | XCAN_IXR_RXNEMP_MASK); + ier |= XCAN_IXR_RXNEMP_MASK; priv->write_reg(priv, XCAN_IER_OFFSET, ier); } return work_done; @@ -799,9 +791,9 @@ static irqreturn_t xcan_interrupt(int irq, void *dev_id) } /* Check for the type of receive interrupt and Processing it */ - if (isr & (XCAN_IXR_RXNEMP_MASK | XCAN_IXR_RXOK_MASK)) { + if (isr & XCAN_IXR_RXNEMP_MASK) { ier = priv->read_reg(priv, XCAN_IER_OFFSET); - ier &= ~(XCAN_IXR_RXNEMP_MASK | XCAN_IXR_RXOK_MASK); + ier &= ~XCAN_IXR_RXNEMP_MASK; priv->write_reg(priv, XCAN_IER_OFFSET, ier); napi_schedule(&priv->napi); } -- cgit v1.2.3 From 877e0b75947e2c7acf5624331bb17ceb093c98ae Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Wed, 8 Feb 2017 13:13:40 +0200 Subject: can: xilinx_can: fix recovery from error states not being propagated The xilinx_can driver contains no mechanism for propagating recovery from CAN_STATE_ERROR_WARNING and CAN_STATE_ERROR_PASSIVE. Add such a mechanism by factoring the handling of XCAN_STATE_ERROR_PASSIVE and XCAN_STATE_ERROR_WARNING out of xcan_err_interrupt and checking for recovery after RX and TX if the interface is in one of those states. Tested with the integrated CAN on Zynq-7000 SoC. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Signed-off-by: Anssi Hannula Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 155 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 127 insertions(+), 28 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 1bda47aa62f5..763408a3eafb 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -2,6 +2,7 @@ * * Copyright (C) 2012 - 2014 Xilinx, Inc. * Copyright (C) 2009 PetaLogix. All rights reserved. + * Copyright (C) 2017 Sandvik Mining and Construction Oy * * Description: * This driver is developed for Axi CAN IP and for Zynq CANPS Controller. @@ -529,6 +530,123 @@ static int xcan_rx(struct net_device *ndev) return 1; } +/** + * xcan_current_error_state - Get current error state from HW + * @ndev: Pointer to net_device structure + * + * Checks the current CAN error state from the HW. Note that this + * only checks for ERROR_PASSIVE and ERROR_WARNING. + * + * Return: + * ERROR_PASSIVE or ERROR_WARNING if either is active, ERROR_ACTIVE + * otherwise. + */ +static enum can_state xcan_current_error_state(struct net_device *ndev) +{ + struct xcan_priv *priv = netdev_priv(ndev); + u32 status = priv->read_reg(priv, XCAN_SR_OFFSET); + + if ((status & XCAN_SR_ESTAT_MASK) == XCAN_SR_ESTAT_MASK) + return CAN_STATE_ERROR_PASSIVE; + else if (status & XCAN_SR_ERRWRN_MASK) + return CAN_STATE_ERROR_WARNING; + else + return CAN_STATE_ERROR_ACTIVE; +} + +/** + * xcan_set_error_state - Set new CAN error state + * @ndev: Pointer to net_device structure + * @new_state: The new CAN state to be set + * @cf: Error frame to be populated or NULL + * + * Set new CAN error state for the device, updating statistics and + * populating the error frame if given. + */ +static void xcan_set_error_state(struct net_device *ndev, + enum can_state new_state, + struct can_frame *cf) +{ + struct xcan_priv *priv = netdev_priv(ndev); + u32 ecr = priv->read_reg(priv, XCAN_ECR_OFFSET); + u32 txerr = ecr & XCAN_ECR_TEC_MASK; + u32 rxerr = (ecr & XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT; + + priv->can.state = new_state; + + if (cf) { + cf->can_id |= CAN_ERR_CRTL; + cf->data[6] = txerr; + cf->data[7] = rxerr; + } + + switch (new_state) { + case CAN_STATE_ERROR_PASSIVE: + priv->can.can_stats.error_passive++; + if (cf) + cf->data[1] = (rxerr > 127) ? + CAN_ERR_CRTL_RX_PASSIVE : + CAN_ERR_CRTL_TX_PASSIVE; + break; + case CAN_STATE_ERROR_WARNING: + priv->can.can_stats.error_warning++; + if (cf) + cf->data[1] |= (txerr > rxerr) ? + CAN_ERR_CRTL_TX_WARNING : + CAN_ERR_CRTL_RX_WARNING; + break; + case CAN_STATE_ERROR_ACTIVE: + if (cf) + cf->data[1] |= CAN_ERR_CRTL_ACTIVE; + break; + default: + /* non-ERROR states are handled elsewhere */ + WARN_ON(1); + break; + } +} + +/** + * xcan_update_error_state_after_rxtx - Update CAN error state after RX/TX + * @ndev: Pointer to net_device structure + * + * If the device is in a ERROR-WARNING or ERROR-PASSIVE state, check if + * the performed RX/TX has caused it to drop to a lesser state and set + * the interface state accordingly. + */ +static void xcan_update_error_state_after_rxtx(struct net_device *ndev) +{ + struct xcan_priv *priv = netdev_priv(ndev); + enum can_state old_state = priv->can.state; + enum can_state new_state; + + /* changing error state due to successful frame RX/TX can only + * occur from these states + */ + if (old_state != CAN_STATE_ERROR_WARNING && + old_state != CAN_STATE_ERROR_PASSIVE) + return; + + new_state = xcan_current_error_state(ndev); + + if (new_state != old_state) { + struct sk_buff *skb; + struct can_frame *cf; + + skb = alloc_can_err_skb(ndev, &cf); + + xcan_set_error_state(ndev, new_state, skb ? cf : NULL); + + if (skb) { + struct net_device_stats *stats = &ndev->stats; + + stats->rx_packets++; + stats->rx_bytes += cf->can_dlc; + netif_rx(skb); + } + } +} + /** * xcan_err_interrupt - error frame Isr * @ndev: net_device pointer @@ -544,16 +662,12 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr) struct net_device_stats *stats = &ndev->stats; struct can_frame *cf; struct sk_buff *skb; - u32 err_status, status, txerr = 0, rxerr = 0; + u32 err_status; skb = alloc_can_err_skb(ndev, &cf); err_status = priv->read_reg(priv, XCAN_ESR_OFFSET); priv->write_reg(priv, XCAN_ESR_OFFSET, err_status); - txerr = priv->read_reg(priv, XCAN_ECR_OFFSET) & XCAN_ECR_TEC_MASK; - rxerr = ((priv->read_reg(priv, XCAN_ECR_OFFSET) & - XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT); - status = priv->read_reg(priv, XCAN_SR_OFFSET); if (isr & XCAN_IXR_BSOFF_MASK) { priv->can.state = CAN_STATE_BUS_OFF; @@ -563,28 +677,10 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr) can_bus_off(ndev); if (skb) cf->can_id |= CAN_ERR_BUSOFF; - } else if ((status & XCAN_SR_ESTAT_MASK) == XCAN_SR_ESTAT_MASK) { - priv->can.state = CAN_STATE_ERROR_PASSIVE; - priv->can.can_stats.error_passive++; - if (skb) { - cf->can_id |= CAN_ERR_CRTL; - cf->data[1] = (rxerr > 127) ? - CAN_ERR_CRTL_RX_PASSIVE : - CAN_ERR_CRTL_TX_PASSIVE; - cf->data[6] = txerr; - cf->data[7] = rxerr; - } - } else if (status & XCAN_SR_ERRWRN_MASK) { - priv->can.state = CAN_STATE_ERROR_WARNING; - priv->can.can_stats.error_warning++; - if (skb) { - cf->can_id |= CAN_ERR_CRTL; - cf->data[1] |= (txerr > rxerr) ? - CAN_ERR_CRTL_TX_WARNING : - CAN_ERR_CRTL_RX_WARNING; - cf->data[6] = txerr; - cf->data[7] = rxerr; - } + } else { + enum can_state new_state = xcan_current_error_state(ndev); + + xcan_set_error_state(ndev, new_state, skb ? cf : NULL); } /* Check for Arbitration lost interrupt */ @@ -713,8 +809,10 @@ static int xcan_rx_poll(struct napi_struct *napi, int quota) isr = priv->read_reg(priv, XCAN_ISR_OFFSET); } - if (work_done) + if (work_done) { can_led_event(ndev, CAN_LED_EVENT_RX); + xcan_update_error_state_after_rxtx(ndev); + } if (work_done < quota) { napi_complete_done(napi, work_done); @@ -745,6 +843,7 @@ static void xcan_tx_interrupt(struct net_device *ndev, u32 isr) isr = priv->read_reg(priv, XCAN_ISR_OFFSET); } can_led_event(ndev, CAN_LED_EVENT_TX); + xcan_update_error_state_after_rxtx(ndev); netif_wake_queue(ndev); } -- cgit v1.2.3 From 620050d9c2be15c47017ba95efe59e0832e99a56 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Thu, 23 Feb 2017 14:50:03 +0200 Subject: can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting The xilinx_can driver assumes that the TXOK interrupt only clears after it has been acknowledged as many times as there have been successfully sent frames. However, the documentation does not mention such behavior, instead saying just that the interrupt is cleared when the clear bit is set. Similarly, testing seems to also suggest that it is immediately cleared regardless of the amount of frames having been sent. Performing some heavy TX load and then going back to idle has the tx_head drifting further away from tx_tail over time, steadily reducing the amount of frames the driver keeps in the TX FIFO (but not to zero, as the TXOK interrupt always frees up space for 1 frame from the driver's perspective, so frames continue to be sent) and delaying the local echo frames. The TX FIFO tracking is also otherwise buggy as it does not account for TX FIFO being cleared after software resets, causing BUG!, TX FIFO full when queue awake! messages to be output. There does not seem to be any way to accurately track the state of the TX FIFO for local echo support while using the full TX FIFO. The Zynq version of the HW (but not the soft-AXI version) has watermark programming support and with it an additional TX-FIFO-empty interrupt bit. Modify the driver to only put 1 frame into TX FIFO at a time on soft-AXI and 2 frames at a time on Zynq. On Zynq the TXFEMP interrupt bit is used to detect whether 1 or 2 frames have been sent at interrupt processing time. Tested with the integrated CAN on Zynq-7000 SoC. The 1-frame-FIFO mode was also tested. An alternative way to solve this would be to drop local echo support but keep using the full TX FIFO. v2: Add FIFO space check before TX queue wake with locking to synchronize with queue stop. This avoids waking the queue when xmit() had just filled it. v3: Keep local echo support and reduce the amount of frames in FIFO instead as suggested by Marc Kleine-Budde. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Signed-off-by: Anssi Hannula Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 139 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 123 insertions(+), 16 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 763408a3eafb..dcbdc3cd651c 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -26,8 +26,10 @@ #include #include #include +#include #include #include +#include #include #include #include @@ -119,6 +121,7 @@ enum xcan_reg { /** * struct xcan_priv - This definition define CAN driver instance * @can: CAN private data structure. + * @tx_lock: Lock for synchronizing TX interrupt handling * @tx_head: Tx CAN packets ready to send on the queue * @tx_tail: Tx CAN packets successfully sended on the queue * @tx_max: Maximum number packets the driver can send @@ -133,6 +136,7 @@ enum xcan_reg { */ struct xcan_priv { struct can_priv can; + spinlock_t tx_lock; unsigned int tx_head; unsigned int tx_tail; unsigned int tx_max; @@ -160,6 +164,11 @@ static const struct can_bittiming_const xcan_bittiming_const = { .brp_inc = 1, }; +#define XCAN_CAP_WATERMARK 0x0001 +struct xcan_devtype_data { + unsigned int caps; +}; + /** * xcan_write_reg_le - Write a value to the device register little endian * @priv: Driver private data structure @@ -239,6 +248,10 @@ static int set_reset_mode(struct net_device *ndev) usleep_range(500, 10000); } + /* reset clears FIFOs */ + priv->tx_head = 0; + priv->tx_tail = 0; + return 0; } @@ -393,6 +406,7 @@ static int xcan_start_xmit(struct sk_buff *skb, struct net_device *ndev) struct net_device_stats *stats = &ndev->stats; struct can_frame *cf = (struct can_frame *)skb->data; u32 id, dlc, data[2] = {0, 0}; + unsigned long flags; if (can_dropped_invalid_skb(ndev, skb)) return NETDEV_TX_OK; @@ -440,6 +454,9 @@ static int xcan_start_xmit(struct sk_buff *skb, struct net_device *ndev) data[1] = be32_to_cpup((__be32 *)(cf->data + 4)); can_put_echo_skb(skb, ndev, priv->tx_head % priv->tx_max); + + spin_lock_irqsave(&priv->tx_lock, flags); + priv->tx_head++; /* Write the Frame to Xilinx CAN TX FIFO */ @@ -455,10 +472,16 @@ static int xcan_start_xmit(struct sk_buff *skb, struct net_device *ndev) stats->tx_bytes += cf->can_dlc; } + /* Clear TX-FIFO-empty interrupt for xcan_tx_interrupt() */ + if (priv->tx_max > 1) + priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXFEMP_MASK); + /* Check if the TX buffer is full */ if ((priv->tx_head - priv->tx_tail) == priv->tx_max) netif_stop_queue(ndev); + spin_unlock_irqrestore(&priv->tx_lock, flags); + return NETDEV_TX_OK; } @@ -832,19 +855,71 @@ static void xcan_tx_interrupt(struct net_device *ndev, u32 isr) { struct xcan_priv *priv = netdev_priv(ndev); struct net_device_stats *stats = &ndev->stats; + unsigned int frames_in_fifo; + int frames_sent = 1; /* TXOK => at least 1 frame was sent */ + unsigned long flags; + int retries = 0; + + /* Synchronize with xmit as we need to know the exact number + * of frames in the FIFO to stay in sync due to the TXFEMP + * handling. + * This also prevents a race between netif_wake_queue() and + * netif_stop_queue(). + */ + spin_lock_irqsave(&priv->tx_lock, flags); + + frames_in_fifo = priv->tx_head - priv->tx_tail; - while ((priv->tx_head - priv->tx_tail > 0) && - (isr & XCAN_IXR_TXOK_MASK)) { + if (WARN_ON_ONCE(frames_in_fifo == 0)) { + /* clear TXOK anyway to avoid getting back here */ priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK); + spin_unlock_irqrestore(&priv->tx_lock, flags); + return; + } + + /* Check if 2 frames were sent (TXOK only means that at least 1 + * frame was sent). + */ + if (frames_in_fifo > 1) { + WARN_ON(frames_in_fifo > priv->tx_max); + + /* Synchronize TXOK and isr so that after the loop: + * (1) isr variable is up-to-date at least up to TXOK clear + * time. This avoids us clearing a TXOK of a second frame + * but not noticing that the FIFO is now empty and thus + * marking only a single frame as sent. + * (2) No TXOK is left. Having one could mean leaving a + * stray TXOK as we might process the associated frame + * via TXFEMP handling as we read TXFEMP *after* TXOK + * clear to satisfy (1). + */ + while ((isr & XCAN_IXR_TXOK_MASK) && !WARN_ON(++retries == 100)) { + priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK); + isr = priv->read_reg(priv, XCAN_ISR_OFFSET); + } + + if (isr & XCAN_IXR_TXFEMP_MASK) { + /* nothing in FIFO anymore */ + frames_sent = frames_in_fifo; + } + } else { + /* single frame in fifo, just clear TXOK */ + priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK); + } + + while (frames_sent--) { can_get_echo_skb(ndev, priv->tx_tail % priv->tx_max); priv->tx_tail++; stats->tx_packets++; - isr = priv->read_reg(priv, XCAN_ISR_OFFSET); } + + netif_wake_queue(ndev); + + spin_unlock_irqrestore(&priv->tx_lock, flags); + can_led_event(ndev, CAN_LED_EVENT_TX); xcan_update_error_state_after_rxtx(ndev); - netif_wake_queue(ndev); } /** @@ -1151,6 +1226,18 @@ static const struct dev_pm_ops xcan_dev_pm_ops = { SET_RUNTIME_PM_OPS(xcan_runtime_suspend, xcan_runtime_resume, NULL) }; +static const struct xcan_devtype_data xcan_zynq_data = { + .caps = XCAN_CAP_WATERMARK, +}; + +/* Match table for OF platform binding */ +static const struct of_device_id xcan_of_match[] = { + { .compatible = "xlnx,zynq-can-1.0", .data = &xcan_zynq_data }, + { .compatible = "xlnx,axi-can-1.00.a", }, + { /* end of list */ }, +}; +MODULE_DEVICE_TABLE(of, xcan_of_match); + /** * xcan_probe - Platform registration call * @pdev: Handle to the platform device structure @@ -1165,8 +1252,10 @@ static int xcan_probe(struct platform_device *pdev) struct resource *res; /* IO mem resources */ struct net_device *ndev; struct xcan_priv *priv; + const struct of_device_id *of_id; + int caps = 0; void __iomem *addr; - int ret, rx_max, tx_max; + int ret, rx_max, tx_max, tx_fifo_depth; /* Get the virtual base address for the device */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1176,7 +1265,8 @@ static int xcan_probe(struct platform_device *pdev) goto err; } - ret = of_property_read_u32(pdev->dev.of_node, "tx-fifo-depth", &tx_max); + ret = of_property_read_u32(pdev->dev.of_node, "tx-fifo-depth", + &tx_fifo_depth); if (ret < 0) goto err; @@ -1184,6 +1274,30 @@ static int xcan_probe(struct platform_device *pdev) if (ret < 0) goto err; + of_id = of_match_device(xcan_of_match, &pdev->dev); + if (of_id) { + const struct xcan_devtype_data *devtype_data = of_id->data; + + if (devtype_data) + caps = devtype_data->caps; + } + + /* There is no way to directly figure out how many frames have been + * sent when the TXOK interrupt is processed. If watermark programming + * is supported, we can have 2 frames in the FIFO and use TXFEMP + * to determine if 1 or 2 frames have been sent. + * Theoretically we should be able to use TXFWMEMP to determine up + * to 3 frames, but it seems that after putting a second frame in the + * FIFO, with watermark at 2 frames, it can happen that TXFWMEMP (less + * than 2 frames in FIFO) is set anyway with no TXOK (a frame was + * sent), which is not a sensible state - possibly TXFWMEMP is not + * completely synchronized with the rest of the bits? + */ + if (caps & XCAN_CAP_WATERMARK) + tx_max = min(tx_fifo_depth, 2); + else + tx_max = 1; + /* Create a CAN device instance */ ndev = alloc_candev(sizeof(struct xcan_priv), tx_max); if (!ndev) @@ -1198,6 +1312,7 @@ static int xcan_probe(struct platform_device *pdev) CAN_CTRLMODE_BERR_REPORTING; priv->reg_base = addr; priv->tx_max = tx_max; + spin_lock_init(&priv->tx_lock); /* Get IRQ for the device */ ndev->irq = platform_get_irq(pdev, 0); @@ -1262,9 +1377,9 @@ static int xcan_probe(struct platform_device *pdev) pm_runtime_put(&pdev->dev); - netdev_dbg(ndev, "reg_base=0x%p irq=%d clock=%d, tx fifo depth:%d\n", + netdev_dbg(ndev, "reg_base=0x%p irq=%d clock=%d, tx fifo depth: actual %d, using %d\n", priv->reg_base, ndev->irq, priv->can.clock.freq, - priv->tx_max); + tx_fifo_depth, priv->tx_max); return 0; @@ -1298,14 +1413,6 @@ static int xcan_remove(struct platform_device *pdev) return 0; } -/* Match table for OF platform binding */ -static const struct of_device_id xcan_of_match[] = { - { .compatible = "xlnx,zynq-can-1.0", }, - { .compatible = "xlnx,axi-can-1.00.a", }, - { /* end of list */ }, -}; -MODULE_DEVICE_TABLE(of, xcan_of_match); - static struct platform_driver xcan_driver = { .probe = xcan_probe, .remove = xcan_remove, -- cgit v1.2.3 From 83997997252f5d3fc7f04abc24a89600c2b504ab Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Mon, 26 Feb 2018 14:27:13 +0200 Subject: can: xilinx_can: fix RX overflow interrupt not being enabled RX overflow interrupt (RXOFLW) is disabled even though xcan_interrupt() processes it. This means that an RX overflow interrupt will only be processed when another interrupt gets asserted (e.g. for RX/TX). Fix that by enabling the RXOFLW interrupt. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Signed-off-by: Anssi Hannula Cc: Michal Simek Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index dcbdc3cd651c..ea9f9d1a5ba7 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -104,7 +104,7 @@ enum xcan_reg { #define XCAN_INTR_ALL (XCAN_IXR_TXOK_MASK | XCAN_IXR_BSOFF_MASK |\ XCAN_IXR_WKUP_MASK | XCAN_IXR_SLP_MASK | \ XCAN_IXR_RXNEMP_MASK | XCAN_IXR_ERROR_MASK | \ - XCAN_IXR_ARBLST_MASK) + XCAN_IXR_RXOFLW_MASK | XCAN_IXR_ARBLST_MASK) /* CAN register bit shift - XCAN___SHIFT */ #define XCAN_BTR_SJW_SHIFT 7 /* Synchronous jump width */ -- cgit v1.2.3 From 2f4f0f338cf453bfcdbcf089e177c16f35f023c8 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Mon, 26 Feb 2018 14:39:59 +0200 Subject: can: xilinx_can: fix incorrect clear of non-processed interrupts xcan_interrupt() clears ERROR|RXOFLV|BSOFF|ARBLST interrupts if any of them is asserted. This does not take into account that some of them could have been asserted between interrupt status read and interrupt clear, therefore clearing them without handling them. Fix the code to only clear those interrupts that it knows are asserted and therefore going to be processed in xcan_err_interrupt(). Fixes: b1201e44f50b ("can: xilinx CAN controller support") Signed-off-by: Anssi Hannula Cc: Michal Simek Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index ea9f9d1a5ba7..cb80a9aa7281 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -938,6 +938,7 @@ static irqreturn_t xcan_interrupt(int irq, void *dev_id) struct net_device *ndev = (struct net_device *)dev_id; struct xcan_priv *priv = netdev_priv(ndev); u32 isr, ier; + u32 isr_errors; /* Get the interrupt status from Xilinx CAN */ isr = priv->read_reg(priv, XCAN_ISR_OFFSET); @@ -956,11 +957,10 @@ static irqreturn_t xcan_interrupt(int irq, void *dev_id) xcan_tx_interrupt(ndev, isr); /* Check for the type of error interrupt and Processing it */ - if (isr & (XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK | - XCAN_IXR_BSOFF_MASK | XCAN_IXR_ARBLST_MASK)) { - priv->write_reg(priv, XCAN_ICR_OFFSET, (XCAN_IXR_ERROR_MASK | - XCAN_IXR_RXOFLW_MASK | XCAN_IXR_BSOFF_MASK | - XCAN_IXR_ARBLST_MASK)); + isr_errors = isr & (XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK | + XCAN_IXR_BSOFF_MASK | XCAN_IXR_ARBLST_MASK); + if (isr_errors) { + priv->write_reg(priv, XCAN_ICR_OFFSET, isr_errors); xcan_err_interrupt(ndev, isr); } -- cgit v1.2.3 From 8ebd83bdb027f29870d96649dba18b91581ea829 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Thu, 17 May 2018 15:41:19 +0300 Subject: can: xilinx_can: fix power management handling There are several issues with the suspend/resume handling code of the driver: - The device is attached and detached in the runtime_suspend() and runtime_resume() callbacks if the interface is running. However, during xcan_chip_start() the interface is considered running, causing the resume handler to incorrectly call netif_start_queue() at the beginning of xcan_chip_start(), and on xcan_chip_start() error return the suspend handler detaches the device leaving the user unable to bring-up the device anymore. - The device is not brought properly up on system resume. A reset is done and the code tries to determine the bus state after that. However, after reset the device is always in Configuration mode (down), so the state checking code does not make sense and communication will also not work. - The suspend callback tries to set the device to sleep mode (low-power mode which monitors the bus and brings the device back to normal mode on activity), but then immediately disables the clocks (possibly before the device reaches the sleep mode), which does not make sense to me. If a clean shutdown is wanted before disabling clocks, we can just bring it down completely instead of only sleep mode. Reorganize the PM code so that only the clock logic remains in the runtime PM callbacks and the system PM callbacks contain the device bring-up/down logic. This makes calling the runtime PM callbacks during e.g. xcan_chip_start() safe. The system PM callbacks now simply call common code to start/stop the HW if the interface was running, replacing the broken code from before. xcan_chip_stop() is updated to use the common reset code so that it will wait for the reset to complete. Reset also disables all interrupts so do not do that separately. Also, the device_may_wakeup() checks are removed as the driver does not have wakeup support. Tested on Zynq-7000 integrated CAN. Signed-off-by: Anssi Hannula Cc: Michal Simek Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 69 ++++++++++++++++++-------------------------- 1 file changed, 28 insertions(+), 41 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index cb80a9aa7281..5a24039733ef 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -984,13 +984,9 @@ static irqreturn_t xcan_interrupt(int irq, void *dev_id) static void xcan_chip_stop(struct net_device *ndev) { struct xcan_priv *priv = netdev_priv(ndev); - u32 ier; /* Disable interrupts and leave the can in configuration mode */ - ier = priv->read_reg(priv, XCAN_IER_OFFSET); - ier &= ~XCAN_INTR_ALL; - priv->write_reg(priv, XCAN_IER_OFFSET, ier); - priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK); + set_reset_mode(ndev); priv->can.state = CAN_STATE_STOPPED; } @@ -1123,10 +1119,15 @@ static const struct net_device_ops xcan_netdev_ops = { */ static int __maybe_unused xcan_suspend(struct device *dev) { - if (!device_may_wakeup(dev)) - return pm_runtime_force_suspend(dev); + struct net_device *ndev = dev_get_drvdata(dev); - return 0; + if (netif_running(ndev)) { + netif_stop_queue(ndev); + netif_device_detach(ndev); + xcan_chip_stop(ndev); + } + + return pm_runtime_force_suspend(dev); } /** @@ -1138,11 +1139,27 @@ static int __maybe_unused xcan_suspend(struct device *dev) */ static int __maybe_unused xcan_resume(struct device *dev) { - if (!device_may_wakeup(dev)) - return pm_runtime_force_resume(dev); + struct net_device *ndev = dev_get_drvdata(dev); + int ret; - return 0; + ret = pm_runtime_force_resume(dev); + if (ret) { + dev_err(dev, "pm_runtime_force_resume failed on resume\n"); + return ret; + } + + if (netif_running(ndev)) { + ret = xcan_chip_start(ndev); + if (ret) { + dev_err(dev, "xcan_chip_start failed on resume\n"); + return ret; + } + netif_device_attach(ndev); + netif_start_queue(ndev); + } + + return 0; } /** @@ -1157,14 +1174,6 @@ static int __maybe_unused xcan_runtime_suspend(struct device *dev) struct net_device *ndev = dev_get_drvdata(dev); struct xcan_priv *priv = netdev_priv(ndev); - if (netif_running(ndev)) { - netif_stop_queue(ndev); - netif_device_detach(ndev); - } - - priv->write_reg(priv, XCAN_MSR_OFFSET, XCAN_MSR_SLEEP_MASK); - priv->can.state = CAN_STATE_SLEEPING; - clk_disable_unprepare(priv->bus_clk); clk_disable_unprepare(priv->can_clk); @@ -1183,7 +1192,6 @@ static int __maybe_unused xcan_runtime_resume(struct device *dev) struct net_device *ndev = dev_get_drvdata(dev); struct xcan_priv *priv = netdev_priv(ndev); int ret; - u32 isr, status; ret = clk_prepare_enable(priv->bus_clk); if (ret) { @@ -1197,27 +1205,6 @@ static int __maybe_unused xcan_runtime_resume(struct device *dev) return ret; } - priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK); - isr = priv->read_reg(priv, XCAN_ISR_OFFSET); - status = priv->read_reg(priv, XCAN_SR_OFFSET); - - if (netif_running(ndev)) { - if (isr & XCAN_IXR_BSOFF_MASK) { - priv->can.state = CAN_STATE_BUS_OFF; - priv->write_reg(priv, XCAN_SRR_OFFSET, - XCAN_SRR_RESET_MASK); - } else if ((status & XCAN_SR_ESTAT_MASK) == - XCAN_SR_ESTAT_MASK) { - priv->can.state = CAN_STATE_ERROR_PASSIVE; - } else if (status & XCAN_SR_ERRWRN_MASK) { - priv->can.state = CAN_STATE_ERROR_WARNING; - } else { - priv->can.state = CAN_STATE_ERROR_ACTIVE; - } - netif_device_attach(ndev); - netif_start_queue(ndev); - } - return 0; } -- cgit v1.2.3 From 18041b523692038d41751fd8046638c356d77a36 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 24 Jul 2018 22:21:04 +0200 Subject: r8169: restore previous behavior to accept BIOS WoL settings Commit 7edf6d314cd0 tried to resolve an inconsistency (BIOS WoL settings are accepted, but device isn't wakeup-enabled) resulting from a previous broken-BIOS workaround by making disabled WoL the default. This however had some side effects, most likely due to a broken BIOS some systems don't properly resume from suspend when the MagicPacket WoL bit isn't set in the chip, see https://bugzilla.kernel.org/show_bug.cgi?id=200195 Therefore restore the WoL behavior from 4.16. Reported-by: Albert Astals Cid Fixes: 7edf6d314cd0 ("r8169: disable WOL per default") Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index a3f69901ac87..eaedc11ed686 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -7734,8 +7734,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } - /* override BIOS settings, use userspace tools to enable WOL */ - __rtl8169_set_wol(tp, 0); + tp->saved_wolopts = __rtl8169_get_wol(tp); if (rtl_tbi_enabled(tp)) { tp->set_speed = rtl8169_set_speed_tbi; -- cgit v1.2.3 From 958c696f5a7274d9447a458ad7aa70719b29a50a Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 24 Jul 2018 14:27:55 +0300 Subject: net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper Function mlx4_RST2INIT_QP_wrapper saved the qp number passed in the qp context, rather than the one passed in the input modifier. However, the qp number in the qp context is not defined as a required parameter by the FW. Therefore, drivers may choose to not specify the qp number in the qp context for the reset-to-init transition. Thus, we must save the qp number passed in the command input modifier -- which is always present. (This saved qp number is used as the input modifier for command 2RST_QP when a slave's qp's are destroyed). Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by: Jack Morgenstein Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 7b1b5ac986d0..31bd56727022 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -2958,7 +2958,7 @@ int mlx4_RST2INIT_QP_wrapper(struct mlx4_dev *dev, int slave, u32 srqn = qp_get_srqn(qpc) & 0xffffff; int use_srq = (qp_get_srqn(qpc) >> 24) & 1; struct res_srq *srq; - int local_qpn = be32_to_cpu(qpc->local_qpn) & 0xffffff; + int local_qpn = vhcr->in_modifier & 0xffffff; err = adjust_qp_sched_queue(dev, slave, qpc, inbox); if (err) -- cgit v1.2.3 From ae2dcb28c24794a87e424a726a1cf1a61980f52d Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Tue, 24 Jul 2018 02:43:52 -0700 Subject: bnx2x: Fix invalid memory access in rss hash config path. Rx hash/filter table configuration uses rss_conf_obj to configure filters in the hardware. This object is initialized only when the interface is brought up. This patch adds driver changes to configure rss params only when the device is in opened state. In port disabled case, the config will be cached in the driver structure which will be applied in the successive load path. Please consider applying it to 'net' branch. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index da18aa239acb..a4a90b6cdb46 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -3388,14 +3388,18 @@ static int bnx2x_set_rss_flags(struct bnx2x *bp, struct ethtool_rxnfc *info) DP(BNX2X_MSG_ETHTOOL, "rss re-configured, UDP 4-tupple %s\n", udp_rss_requested ? "enabled" : "disabled"); - return bnx2x_rss(bp, &bp->rss_conf_obj, false, true); + if (bp->state == BNX2X_STATE_OPEN) + return bnx2x_rss(bp, &bp->rss_conf_obj, false, + true); } else if ((info->flow_type == UDP_V6_FLOW) && (bp->rss_conf_obj.udp_rss_v6 != udp_rss_requested)) { bp->rss_conf_obj.udp_rss_v6 = udp_rss_requested; DP(BNX2X_MSG_ETHTOOL, "rss re-configured, UDP 4-tupple %s\n", udp_rss_requested ? "enabled" : "disabled"); - return bnx2x_rss(bp, &bp->rss_conf_obj, false, true); + if (bp->state == BNX2X_STATE_OPEN) + return bnx2x_rss(bp, &bp->rss_conf_obj, false, + true); } return 0; @@ -3509,7 +3513,10 @@ static int bnx2x_set_rxfh(struct net_device *dev, const u32 *indir, bp->rss_conf_obj.ind_table[i] = indir[i] + bp->fp->cl_id; } - return bnx2x_config_rss_eth(bp, false); + if (bp->state == BNX2X_STATE_OPEN) + return bnx2x_config_rss_eth(bp, false); + + return 0; } /** -- cgit v1.2.3 From f25e1392fdb556290957142ac2da33a02cbff403 Mon Sep 17 00:00:00 2001 From: Aleksander Morgado Date: Tue, 24 Jul 2018 01:31:07 +0200 Subject: qmi_wwan: fix interface number for DW5821e production firmware MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The original mapping for the DW5821e was done using a development version of the firmware. Confirmed with the vendor that the final USB layout ends up exposing the QMI control/data ports in USB config #1, interface #0, not in interface #1 (which is now a HID interface). T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Fixes: e7e197edd09c25 ("qmi_wwan: add support for the Dell Wireless 5821e module") Signed-off-by: Aleksander Morgado Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 38502809420b..cb0cc30c3d6a 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1246,7 +1246,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x413c, 0x81b3, 8)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */ {QMI_FIXED_INTF(0x413c, 0x81b6, 8)}, /* Dell Wireless 5811e */ {QMI_FIXED_INTF(0x413c, 0x81b6, 10)}, /* Dell Wireless 5811e */ - {QMI_FIXED_INTF(0x413c, 0x81d7, 1)}, /* Dell Wireless 5821e */ + {QMI_FIXED_INTF(0x413c, 0x81d7, 0)}, /* Dell Wireless 5821e */ {QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */ {QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)}, /* HP lt4120 Snapdragon X5 LTE */ {QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */ -- cgit v1.2.3 From 03bc7cab7d7218088412a75e141696a89059ab00 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Tue, 24 Jul 2018 10:09:53 +0530 Subject: net: axienet: Fix double deregister of mdio If the registration fails then mdio_unregister is called. However at unbind the unregister ia attempted again resulting in the below crash [ 73.544038] kernel BUG at drivers/net/phy/mdio_bus.c:415! [ 73.549362] Internal error: Oops - BUG: 0 [#1] SMP [ 73.554127] Modules linked in: [ 73.557168] CPU: 0 PID: 2249 Comm: sh Not tainted 4.14.0 #183 [ 73.562895] Hardware name: xlnx,zynqmp (DT) [ 73.567062] task: ffffffc879e41180 task.stack: ffffff800cbe0000 [ 73.572973] PC is at mdiobus_unregister+0x84/0x88 [ 73.577656] LR is at axienet_mdio_teardown+0x18/0x30 [ 73.582601] pc : [] lr : [] pstate: 20000145 [ 73.589981] sp : ffffff800cbe3c30 [ 73.593277] x29: ffffff800cbe3c30 x28: ffffffc879e41180 [ 73.598573] x27: ffffff8008a21000 x26: 0000000000000040 [ 73.603868] x25: 0000000000000124 x24: ffffffc879efe920 [ 73.609164] x23: 0000000000000060 x22: ffffffc879e02000 [ 73.614459] x21: ffffffc879e02800 x20: ffffffc87b0b8870 [ 73.619754] x19: ffffffc879e02800 x18: 000000000000025d [ 73.625050] x17: 0000007f9a719ad0 x16: ffffff8008195bd8 [ 73.630345] x15: 0000007f9a6b3d00 x14: 0000000000000010 [ 73.635640] x13: 74656e7265687465 x12: 0000000000000030 [ 73.640935] x11: 0000000000000030 x10: 0101010101010101 [ 73.646231] x9 : 241f394f42533300 x8 : ffffffc8799f6e98 [ 73.651526] x7 : ffffffc8799f6f18 x6 : ffffffc87b0ba318 [ 73.656822] x5 : ffffffc87b0ba498 x4 : 0000000000000000 [ 73.662117] x3 : 0000000000000000 x2 : 0000000000000008 [ 73.667412] x1 : 0000000000000004 x0 : ffffffc8799f4000 [ 73.672708] Process sh (pid: 2249, stack limit = 0xffffff800cbe0000) Fix the same by making the bus NULL on unregister. Signed-off-by: Shubhrajyoti Datta Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c index 16c3bfbe1992..757a3b37ae8a 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c @@ -218,6 +218,7 @@ issue: ret = of_mdiobus_register(bus, np1); if (ret) { mdiobus_free(bus); + lp->mii_bus = NULL; return ret; } return 0; -- cgit v1.2.3