From 37920fce0fc10264410eb880d411968b7934b61d Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 3 Jun 2016 10:17:09 +0200 Subject: net-next: mediatek: properly handle RGMII modes If an external Gigabit PHY is connected to either of the MACs we need to be able to tell the PHY to use a delay. Not doing so will result in heavy packet loss and/or data corruption when using PHYs such as the IC+ IP1001. We tell the PHY which MII delay mode to use via the devictree. The ethernet driver needs to be adapted to handle all 3 rgmii-*id modes in the same way as normal rgmii when setting up the MAC. Reviewed-by: Andrew Lunn Signed-off-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 231d28444a54..4763252bbf85 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -236,6 +236,9 @@ static int mtk_phy_connect(struct mtk_mac *mac) return -ENODEV; switch (of_get_phy_mode(np)) { + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: case PHY_INTERFACE_MODE_RGMII: ge_mode = 0; break; -- cgit v1.2.3