From d554f73df6bc35ac8f6a65e5560bf1d31dfebed9 Mon Sep 17 00:00:00 2001 From: Wei Liu Date: Wed, 19 Feb 2014 18:48:34 +0000 Subject: xen-netfront: reset skb network header before checksum In ed1f50c3a ("net: add skb_checksum_setup") we introduced some checksum functions in core driver. Subsequent change b5cf66cd1 ("xen-netfront: use new skb_checksum_setup function") made use of those functions to replace its own implementation. However with that change netfront is broken. It sees a lot of checksum error. That's because its own implementation of checksum function was a bit hacky (dereferencing skb->data directly) while the new function was implemented using ip_hdr(). The network header is not reset before skb is passed to the new function. When the new function tries to do its job, it's confused and reports error. The fix is simple, we need to reset network header before passing skb to checksum function. Netback is not affected as it already does the right thing. Reported-by: Sander Eikelenboom Signed-off-by: Wei Liu Cc: Konrad Rzeszutek Wilk Cc: Paul Durrant Tested-By: Sander Eikelenboom Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index f9daa9e183f2..e30d80033cbc 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -907,6 +907,7 @@ static int handle_incoming_queue(struct net_device *dev, /* Ethernet work: Delayed to here as it peeks the header. */ skb->protocol = eth_type_trans(skb, dev); + skb_reset_network_header(skb); if (checksum_setup(dev, skb)) { kfree_skb(skb); -- cgit v1.2.3 From 8d0d21f4053c07714802cbe8b1fe26913ec296cc Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Tue, 18 Feb 2014 21:20:08 +0900 Subject: veth: Fix vlan_features so as to be able to use stacked vlan interfaces Even if we create a stacked vlan interface such as veth0.10.20, it sends single tagged frames (tagged with only vid 10). Because vlan_features of a veth interface has the NETIF_F_HW_VLAN_[CTAG/STAG]_TX bits, veth0.10 also has that feature, so dev_hard_start_xmit(veth0.10) doesn't call __vlan_put_tag() and vlan_dev_hard_start_xmit(veth0.10) overwrites vlan_tci. This prevents us from using a combination of 802.1ad and 802.1Q in containers, etc. Signed-off-by: Toshiaki Makita Acked-by: Flavio Leitner Signed-off-by: David S. Miller --- drivers/net/veth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 2ec2041b62d4..5b374370f71c 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -285,7 +285,8 @@ static void veth_setup(struct net_device *dev) dev->ethtool_ops = &veth_ethtool_ops; dev->features |= NETIF_F_LLTX; dev->features |= VETH_FEATURES; - dev->vlan_features = dev->features; + dev->vlan_features = dev->features & + ~(NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX); dev->destructor = veth_dev_free; dev->hw_features = VETH_FEATURES; -- cgit v1.2.3 From 6671b2240c54585d4afb5286a29f1569fe5e40a8 Mon Sep 17 00:00:00 2001 From: Fernando Luis Vazquez Cao Date: Tue, 18 Feb 2014 21:20:09 +0900 Subject: tun: remove bogus hardware vlan acceleration flags from vlan_features Even though only the outer vlan tag can be HW accelerated in the transmission path, in the TUN/TAP driver vlan_features mirrors hw_features, which happens to have the NETIF_F_HW_VLAN_?TAG_TX flags set. Because of this, during packet tranmisssion through a stacked vlan device dev_hard_start_xmit, (incorrectly) assuming that the vlan device supports hardware vlan acceleration, does not add the vlan header to the skb payload and the inner vlan tags are lost (vlan_tci contains the outer vlan tag when userspace reads the packet from the tap device). Signed-off-by: Fernando Luis Vazquez Cao Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller --- drivers/net/tun.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 8fe9cb7d0f72..26f8635b027d 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1686,7 +1686,9 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) TUN_USER_FEATURES | NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX; dev->features = dev->hw_features; - dev->vlan_features = dev->features; + dev->vlan_features = dev->features & + ~(NETIF_F_HW_VLAN_CTAG_TX | + NETIF_F_HW_VLAN_STAG_TX); INIT_LIST_HEAD(&tun->disabled); err = tun_attach(tun, file, false); -- cgit v1.2.3 From ec6f678c74dbdb06a6a775bbb00f1d26c17c404b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 18 Feb 2014 10:30:18 +0200 Subject: iwlwifi: dvm: clear IWL_STA_UCODE_INPROGRESS when assoc fails We set IWL_STA_UCODE_INPROGRESS flag when we add a station and clear it when we send the LQ command for it. But the LQ command is sent only when the association succeeds. If the association doesn't succeed, we would leave this flag set and that wouldn't indicate the station entry as vacant. This probably fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1065663 Cc: Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/dvm/sta.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index c0d070c5df5e..9cdd91cdf661 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -590,6 +590,7 @@ void iwl_deactivate_station(struct iwl_priv *priv, const u8 sta_id, sizeof(priv->tid_data[sta_id][tid])); priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE; + priv->stations[sta_id].used &= ~IWL_STA_UCODE_INPROGRESS; priv->num_stations--; -- cgit v1.2.3 From fb8ef788680d48523321e5f150b23700a1caf980 Mon Sep 17 00:00:00 2001 From: Duan Fugang-B38611 Date: Thu, 20 Feb 2014 18:14:39 +0800 Subject: net: fec: fix potential issue to avoid fec interrupt lost and crc error The current flow: Set TX BD ready, and then set "INT" and "PINS" bit to enable tx interrupt generation and crc checksum. There has potential issue like as: CPU fec uDMA Set tx ready bit uDMA start the BD transmission Set "INT" bit Set "PINS" bit ... Above situation cause fec tx interrupt lost and fec MAC don't do CRC checksum. The patch fix the potential issue. Signed-off-by: Fugang Duan Acked-by: Frank Li Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 903362a7b584..479a7cba45c0 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -389,12 +389,6 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) netdev_err(ndev, "Tx DMA memory map failed\n"); return NETDEV_TX_OK; } - /* Send it on its way. Tell FEC it's ready, interrupt when done, - * it's the last BD of the frame, and to put the CRC on the end. - */ - status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR - | BD_ENET_TX_LAST | BD_ENET_TX_TC); - bdp->cbd_sc = status; if (fep->bufdesc_ex) { @@ -416,6 +410,13 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) } } + /* Send it on its way. Tell FEC it's ready, interrupt when done, + * it's the last BD of the frame, and to put the CRC on the end. + */ + status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR + | BD_ENET_TX_LAST | BD_ENET_TX_TC); + bdp->cbd_sc = status; + bdp_pre = fec_enet_get_prevdesc(bdp, fep); if ((id_entry->driver_data & FEC_QUIRK_ERR006358) && !(bdp_pre->cbd_sc & BD_ENET_TX_READY)) { -- cgit v1.2.3 From 72471c0d3197d02da53897868692f0b91042f8a5 Mon Sep 17 00:00:00 2001 From: Kirill Tkhai Date: Fri, 14 Feb 2014 16:17:49 +0400 Subject: hostap: Do not free priv until timer handler has actually stopped using it Function del_timer() does not guarantee that timer was really deleted. If the timer handler is beeing executed at the moment, the function does nothing. So, it's possible to use already freed memory in the handler: [ref: Documentation/DocBook/kernel-locking.tmpl] This was found using grep and compile-tested only. Please, consider applying or something similar to it. Signed-off-by: Kirill Tkhai CC: Jouni Malinen CC: John W. Linville Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_ap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index d36e252d2ccb..596525528f50 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -147,7 +147,7 @@ static void ap_free_sta(struct ap_data *ap, struct sta_info *sta) if (!sta->ap && sta->u.sta.challenge) kfree(sta->u.sta.challenge); - del_timer(&sta->timer); + del_timer_sync(&sta->timer); #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ kfree(sta); -- cgit v1.2.3 From 95320774fae71d7b22b970ef4267fcc4d1ad23d8 Mon Sep 17 00:00:00 2001 From: James Cameron Date: Mon, 17 Feb 2014 10:25:53 +1100 Subject: libertas: fix scan result loss if SSID IE len 0 Scan results from Marvell 8388 and 8686 have probe responses from hidden APs and OLPC XO-1 mesh with a zero length SSID IE. Bug in lbs_ret_scan discarded any remaining BSS in scan response, leading to user not seeing APs in dense environments. With LBS_DEB_SCAN, dmesg shows libertas scan: scan response: 5 BSSs (419 bytes); resp size 474 bytes libertas scan: scan: 00:1a:2b:84:de:e8, capa 0401, chan 1, qz, -51 dBm libertas scan: scan: 5c:63:bf:d8:eb:0c, capa 0411, chan 1, qw129, -23 dBm libertas scan: scan response: invalid IE fmt With LBS_DEB_HEX, dmesg shows valid BSS in scan response were not processed. Change is to ignore zero length IE and continue processing. Fixes OLPC 12757, http://dev.laptop.org/ticket/12757 Signed-off-by: James Cameron Reported-by: T Gillett Tested-by: T Gillett CC: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cfg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 32f75007a825..cb6d189bc3e6 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -621,7 +621,7 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, id = *pos++; elen = *pos++; left -= 2; - if (elen > left || elen == 0) { + if (elen > left) { lbs_deb_scan("scan response: invalid IE fmt\n"); goto done; } -- cgit v1.2.3 From 4f7ba432202c8330cc03ab959c6228d0de5dc4a3 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Tue, 18 Feb 2014 15:41:54 -0800 Subject: mwifiex: clean pcie ring only when device is present Write io memory to clean PCIe buffer only when PCIe device is present else this results into crash because of invalid memory access. Cc: # 3.9+ Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/wmm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c index 13eaeed03898..981cf6e7c73b 100644 --- a/drivers/net/wireless/mwifiex/wmm.c +++ b/drivers/net/wireless/mwifiex/wmm.c @@ -559,7 +559,8 @@ mwifiex_clean_txrx(struct mwifiex_private *priv) mwifiex_wmm_delete_all_ralist(priv); memcpy(tos_to_tid, ac_to_tid, sizeof(tos_to_tid)); - if (priv->adapter->if_ops.clean_pcie_ring) + if (priv->adapter->if_ops.clean_pcie_ring && + !priv->adapter->surprise_removed) priv->adapter->if_ops.clean_pcie_ring(priv->adapter); spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags); } -- cgit v1.2.3 From bb8e6a1ee881d131e404f0f1f5e8dc9281002771 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 18 Feb 2014 15:41:55 -0800 Subject: mwifiex: add NULL check for PCIe Rx skb We may get a NULL pointer here if skb allocation for Rx packet was failed earlier. Cc: # 3.9+ Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 03688aa14e8a..28029b7522c2 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -1211,6 +1211,12 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) rd_index = card->rxbd_rdptr & reg->rx_mask; skb_data = card->rx_buf_list[rd_index]; + /* If skb allocation was failed earlier for Rx packet, + * rx_buf_list[rd_index] would have been left with a NULL. + */ + if (!skb_data) + return -ENOMEM; + MWIFIEX_SKB_PACB(skb_data, &buf_pa); pci_unmap_single(card->dev, buf_pa, MWIFIEX_RX_DATA_BUF_SIZE, PCI_DMA_FROMDEVICE); -- cgit v1.2.3 From 1c97560f6d751a620978504a4a888c631192b71a Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 18 Feb 2014 15:41:56 -0800 Subject: mwifiex: fix cmd and Tx data timeout issue for PCIe cards We are sending sleep confirm done interrupt in the middle of sleep handshake. There is a corner case when Tx done interrupt is received from firmware during sleep handshake due to which host and firmware power states go out of sync causing cmd and Tx data timeout problem. Hence sleep confirm done interrupt is sent at the end of sleep handshake to fix the problem. Cc: # 3.10+ Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 28029b7522c2..7fe7b53fb17a 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -1531,6 +1531,14 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) if (adapter->ps_state == PS_STATE_SLEEP_CFM) { mwifiex_process_sleep_confirm_resp(adapter, skb->data, skb->len); + mwifiex_pcie_enable_host_int(adapter); + if (mwifiex_write_reg(adapter, + PCIE_CPU_INT_EVENT, + CPU_INTR_SLEEP_CFM_DONE)) { + dev_warn(adapter->dev, + "Write register failed\n"); + return -1; + } while (reg->sleep_cookie && (count++ < 10) && mwifiex_pcie_ok_to_access_hw(adapter)) usleep_range(50, 60); @@ -1999,23 +2007,9 @@ static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter) adapter->int_status |= pcie_ireg; spin_unlock_irqrestore(&adapter->int_lock, flags); - if (pcie_ireg & HOST_INTR_CMD_DONE) { - if ((adapter->ps_state == PS_STATE_SLEEP_CFM) || - (adapter->ps_state == PS_STATE_SLEEP)) { - mwifiex_pcie_enable_host_int(adapter); - if (mwifiex_write_reg(adapter, - PCIE_CPU_INT_EVENT, - CPU_INTR_SLEEP_CFM_DONE) - ) { - dev_warn(adapter->dev, - "Write register failed\n"); - return; - - } - } - } else if (!adapter->pps_uapsd_mode && - adapter->ps_state == PS_STATE_SLEEP && - mwifiex_pcie_ok_to_access_hw(adapter)) { + if (!adapter->pps_uapsd_mode && + adapter->ps_state == PS_STATE_SLEEP && + mwifiex_pcie_ok_to_access_hw(adapter)) { /* Potentially for PCIe we could get other * interrupts like shared. Don't change power * state until cookie is set */ -- cgit v1.2.3 From 21f8aaee0c62708654988ce092838aa7df4d25d8 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 19 Feb 2014 13:15:17 +0100 Subject: ath9k: protect tid->sched check We check tid->sched without a lock taken on ath_tx_aggr_sleep(). That is race condition which can result of doing list_del(&tid->list) twice (second time with poisoned list node) and cause crash like shown below: [424271.637220] BUG: unable to handle kernel paging request at 00100104 [424271.637328] IP: [] ath_tx_aggr_sleep+0x62/0xe0 [ath9k] ... [424271.639953] Call Trace: [424271.639998] [] ? ath9k_get_survey+0x110/0x110 [ath9k] [424271.640083] [] ath9k_sta_notify+0x42/0x50 [ath9k] [424271.640177] [] sta_ps_start+0x8f/0x1c0 [mac80211] [424271.640258] [] ? free_compound_page+0x2e/0x40 [424271.640346] [] ieee80211_rx_handlers+0x9d5/0x2340 [mac80211] [424271.640437] [] ? kmem_cache_free+0x1d8/0x1f0 [424271.640510] [] ? kfree_skbmem+0x34/0x90 [424271.640578] [] ? put_page+0x2c/0x40 [424271.640640] [] ? kfree_skbmem+0x34/0x90 [424271.640706] [] ? kfree_skbmem+0x34/0x90 [424271.640787] [] ? ieee80211_rx_handlers_result+0x73/0x1d0 [mac80211] [424271.640897] [] ieee80211_prepare_and_rx_handle+0x520/0xad0 [mac80211] [424271.641009] [] ? ieee80211_rx_handlers+0x2ed/0x2340 [mac80211] [424271.641104] [] ? ip_output+0x7e/0xd0 [424271.641182] [] ieee80211_rx+0x307/0x7c0 [mac80211] [424271.641266] [] ath_rx_tasklet+0x88e/0xf70 [ath9k] [424271.641358] [] ? ieee80211_rx+0x1dc/0x7c0 [mac80211] [424271.641445] [] ath9k_tasklet+0xcb/0x130 [ath9k] Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=70551 Reported-and-tested-by: Max Sydorenko Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 0a75e2f68c9d..4f4ce83f7ab4 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1444,14 +1444,16 @@ void ath_tx_aggr_sleep(struct ieee80211_sta *sta, struct ath_softc *sc, for (tidno = 0, tid = &an->tid[tidno]; tidno < IEEE80211_NUM_TIDS; tidno++, tid++) { - if (!tid->sched) - continue; - ac = tid->ac; txq = ac->txq; ath_txq_lock(sc, txq); + if (!tid->sched) { + ath_txq_unlock(sc, txq); + continue; + } + buffered = ath_tid_has_buffered(tid); tid->sched = false; -- cgit v1.2.3 From 1eb43018673e735ea9cd756970f4e71ca01a5f21 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Thu, 20 Feb 2014 18:55:55 +0100 Subject: brcmfmac: fix txglomming scatter-gather packet transfers The driver concatenates multiple packets in one MMC transfer. For scatter-gather to work the total length need to be multiple of 512 bytes. A pre-allocated buffer was used to add padding to accomplish that. However, the length was not properly set and it was freed after the first transfer causing a crash. Reviewed-by: Daniel (Deognyoun) Kim Reviewed-by: Hante Meuleman Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 3e991897d7ca..119ee6eaf1c3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -457,7 +457,6 @@ struct brcmf_sdio { u8 tx_hdrlen; /* sdio bus header length for tx packet */ bool txglom; /* host tx glomming enable flag */ - struct sk_buff *txglom_sgpad; /* scatter-gather padding buffer */ u16 head_align; /* buffer pointer alignment */ u16 sgentry_align; /* scatter-gather buffer alignment */ }; @@ -1944,9 +1943,8 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus, if (lastfrm && chain_pad) tail_pad += blksize - chain_pad; if (skb_tailroom(pkt) < tail_pad && pkt->len > blksize) { - pkt_pad = bus->txglom_sgpad; - if (pkt_pad == NULL) - brcmu_pkt_buf_get_skb(tail_pad + tail_chop); + pkt_pad = brcmu_pkt_buf_get_skb(tail_pad + tail_chop + + bus->head_align); if (pkt_pad == NULL) return -ENOMEM; ret = brcmf_sdio_txpkt_hdalign(bus, pkt_pad); @@ -1957,6 +1955,7 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus, tail_chop); *(u32 *)(pkt_pad->cb) = ALIGN_SKB_FLAG + tail_chop; skb_trim(pkt, pkt->len - tail_chop); + skb_trim(pkt_pad, tail_pad + tail_chop); __skb_queue_after(pktq, pkt, pkt_pad); } else { ntail = pkt->data_len + tail_pad - @@ -2011,7 +2010,7 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, return ret; head_pad = (u16)ret; if (head_pad) - memset(pkt_next->data, 0, head_pad + bus->tx_hdrlen); + memset(pkt_next->data + bus->tx_hdrlen, 0, head_pad); total_len += pkt_next->len; @@ -3486,10 +3485,6 @@ static int brcmf_sdio_bus_preinit(struct device *dev) bus->txglom = false; value = 1; pad_size = bus->sdiodev->func[2]->cur_blksize << 1; - bus->txglom_sgpad = brcmu_pkt_buf_get_skb(pad_size); - if (!bus->txglom_sgpad) - brcmf_err("allocating txglom padding skb failed, reduced performance\n"); - err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom", &value, sizeof(u32)); if (err < 0) { @@ -4053,7 +4048,6 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus) brcmf_sdio_chip_detach(&bus->ci); } - brcmu_pkt_buf_free_skb(bus->txglom_sgpad); kfree(bus->rxbuf); kfree(bus->hdrbuf); kfree(bus); -- cgit v1.2.3 From b3050248c167871ca52cfdb2ce78aa2460249346 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Fri, 14 Feb 2014 08:15:20 +0530 Subject: ath9k: Fix ETSI compliance for AR9462 2.0 The minimum CCA power threshold values have to be adjusted for existing cards to be in compliance with new regulations. Newer cards will make use of the values obtained from EEPROM, support for this was added earlier. To make sure that cards that are already in use and don't have proper values in EEPROM, do not violate regulations, use the initvals instead. Cc: stable@vger.kernel.org Reported-by: Jeang Daniel Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h index 1cc13569b17b..1b6b4d0cfa97 100644 --- a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h @@ -57,7 +57,7 @@ static const u32 ar9462_2p0_baseband_postamble[][5] = { {0x00009e14, 0x37b95d5e, 0x37b9605e, 0x3236605e, 0x32365a5e}, {0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c}, - {0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce}, + {0x00009e20, 0x000003a5, 0x000003a5, 0x000003a5, 0x000003a5}, {0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021}, {0x00009e3c, 0xcf946220, 0xcf946220, 0xcfd5c782, 0xcfd5c282}, {0x00009e44, 0x62321e27, 0x62321e27, 0xfe291e27, 0xfe291e27}, @@ -96,7 +96,7 @@ static const u32 ar9462_2p0_baseband_postamble[][5] = { {0x0000ae04, 0x001c0000, 0x001c0000, 0x001c0000, 0x00100000}, {0x0000ae18, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000ae1c, 0x0000019c, 0x0000019c, 0x0000019c, 0x0000019c}, - {0x0000ae20, 0x000001b5, 0x000001b5, 0x000001ce, 0x000001ce}, + {0x0000ae20, 0x000001a6, 0x000001a6, 0x000001aa, 0x000001aa}, {0x0000b284, 0x00000000, 0x00000000, 0x00000550, 0x00000550}, }; -- cgit v1.2.3 From e4ceb0f40da5dc26f84025d121c2fe6ff7d8a947 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Fri, 21 Feb 2014 12:23:00 -0800 Subject: mwifiex: rename usb driver name registerring to usb core Both libertas USB driver and mwifiex_usb driver are registerring with name 'usb8xxx'. The following conflict happens while trying to load both drivers. [6.211307] Error: Driver 'usb8xxx' is already registered... [6.217261] mwifiex_usb: Driver register failed! Fix it by renaming mwifiex_usb driver's name. Reported-by: Fengguang Wu Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/usb.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c index e8ebbd4bc3cd..cb6b70a1b34d 100644 --- a/drivers/net/wireless/mwifiex/usb.c +++ b/drivers/net/wireless/mwifiex/usb.c @@ -22,8 +22,6 @@ #define USB_VERSION "1.0" -static const char usbdriver_name[] = "usb8xxx"; - static struct mwifiex_if_ops usb_ops; static struct semaphore add_remove_card_sem; static struct usb_card_rec *usb_card; @@ -567,7 +565,7 @@ static void mwifiex_usb_disconnect(struct usb_interface *intf) } static struct usb_driver mwifiex_usb_driver = { - .name = usbdriver_name, + .name = "mwifiex_usb", .probe = mwifiex_usb_probe, .disconnect = mwifiex_usb_disconnect, .id_table = mwifiex_usb_table, -- cgit v1.2.3 From 558ff225de80ac95b132d3a115ddadcd64498b4f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 22 Feb 2014 13:48:19 +0100 Subject: ath9k: fix ps-poll responses under a-mpdu sessions When passing tx frames to the U-APSD queue for powersave poll responses, the ath_atx_tid pointer needs to be passed to ath_tx_setup_buffer for proper sequence number accounting. This fixes high latency and connection stability issues with ath9k running as AP and a few kinds of mobile phones as client, when PS-Poll is heavily used Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 4f4ce83f7ab4..f042a18c8495 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2186,14 +2186,15 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb, txq->stopped = true; } + if (txctl->an) + tid = ath_get_skb_tid(sc, txctl->an, skb); + if (info->flags & IEEE80211_TX_CTL_PS_RESPONSE) { ath_txq_unlock(sc, txq); txq = sc->tx.uapsdq; ath_txq_lock(sc, txq); } else if (txctl->an && ieee80211_is_data_present(hdr->frame_control)) { - tid = ath_get_skb_tid(sc, txctl->an, skb); - WARN_ON(tid->ac->txq != txctl->txq); if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT) -- cgit v1.2.3 From 0e7ede80d929ff0f830c44a543daa1acd590c749 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Fri, 21 Feb 2014 13:08:04 +0800 Subject: virtio-net: alloc big buffers also when guest can receive UFO We should alloc big buffers also when guest can receive UFO packets to let the big packets fit into guest rx buffer. Fixes 5c5167515d80f78f6bb538492c423adcae31ad65 (virtio-net: Allow UFO feature to be set and advertised.) Cc: Rusty Russell Cc: Michael S. Tsirkin Cc: Sridhar Samudrala Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Acked-by: Rusty Russell Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index d75f8edf4fb3..5632a99cbbd2 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1711,7 +1711,8 @@ static int virtnet_probe(struct virtio_device *vdev) /* If we can receive ANY GSO packets, we must allocate large ones. */ if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) || virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6) || - virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN)) + virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN) || + virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_UFO)) vi->big_packets = true; if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF)) -- cgit v1.2.3 From 7262b7b26de1495f77edbe1e71cb15b8198adb9d Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sat, 22 Feb 2014 13:09:03 +0100 Subject: net: stmmac: Check return value of alloc_dma_desc_resources() alloc_dma_desc_resources() returns an error value and the next line actually checks for it, so assign the return value properly. Found by the coverity scanner. Signed-off-by: Tobias Klauser Acked-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index a2e7d2c96e36..078ad0ec8593 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1705,7 +1705,7 @@ static int stmmac_open(struct net_device *dev) priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize); priv->dma_buf_sz = STMMAC_ALIGN(buf_sz); - alloc_dma_desc_resources(priv); + ret = alloc_dma_desc_resources(priv); if (ret < 0) { pr_err("%s: DMA descriptors allocation failed\n", __func__); goto dma_desc_error; -- cgit v1.2.3 From 340fea3d7f6a2657ddd0b48413cd81e8513357ed Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 24 Feb 2014 20:12:28 -0500 Subject: r8169: initialize rtl8169_stats seqlock Boris reports he's seeing: > [ 9.195943] INFO: trying to register non-static key. > [ 9.196031] the code is fine but needs lockdep annotation. > [ 9.196031] turning off the locking correctness validator. > [ 9.196031] CPU: 1 PID: 933 Comm: modprobe Not tainted 3.14.0-rc4+ #1 with the r8169 driver. These are occuring because the seqcount embedded in u64_stats_sync on 32-bit SMP is uninitialized which is making lockdep unhappy. Signed-off-by: Kyle McMartin Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 91a67ae8f17b..e9779653cd4c 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -7118,6 +7118,8 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } mutex_init(&tp->wk.mutex); + u64_stats_init(&tp->rx_stats.syncp); + u64_stats_init(&tp->tx_stats.syncp); /* Get MAC address */ for (i = 0; i < ETH_ALEN; i++) -- cgit v1.2.3 From d31a36a6d87f68c3b97193bfca11e99d0cc385f7 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 24 Feb 2014 22:26:05 +0100 Subject: ath9k: reduce baseband hang detection false positive rate Check if the baseband state remains stable, and add a small delay between register reads. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 11eab9f01fd8..303ce27964c1 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1534,7 +1534,7 @@ EXPORT_SYMBOL(ath9k_hw_check_nav); bool ath9k_hw_check_alive(struct ath_hw *ah) { int count = 50; - u32 reg; + u32 reg, last_val; if (AR_SREV_9300(ah)) return !ath9k_hw_detect_mac_hang(ah); @@ -1542,9 +1542,13 @@ bool ath9k_hw_check_alive(struct ath_hw *ah) if (AR_SREV_9285_12_OR_LATER(ah)) return true; + last_val = REG_READ(ah, AR_OBS_BUS_1); do { reg = REG_READ(ah, AR_OBS_BUS_1); + if (reg != last_val) + return true; + last_val = reg; if ((reg & 0x7E7FFFEF) == 0x00702400) continue; @@ -1556,6 +1560,8 @@ bool ath9k_hw_check_alive(struct ath_hw *ah) default: return true; } + + udelay(1); } while (count-- > 0); return false; -- cgit v1.2.3 From b7b146c9c9a0248cc57da71244f672ebc54bbef1 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 24 Feb 2014 22:26:06 +0100 Subject: ath9k: fix invalid descriptor discarding MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only set sc->rx.discard_next to rx_stats->rs_more when actually discarding the current descriptor. Also, fix a detection of broken descriptors: First the code checks if the current descriptor is not done. Then it checks if the next descriptor is done. Add a check that afterwards checks the first descriptor again, because it might have been completed in the mean time. This fixes a regression introduced in commit 723e711356b5a8a95728a890e254e8b0d47b55cf "ath9k: fix handling of broken descriptors" Cc: stable@vger.kernel.org Reported-by: Marco AndrĂ© Dinis Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 70 +++++++++++++++++------------------ 1 file changed, 35 insertions(+), 35 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index a0ebdd000fc2..82e340d3ec60 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -732,11 +732,18 @@ static struct ath_rxbuf *ath_get_next_rx_buf(struct ath_softc *sc, return NULL; /* - * mark descriptor as zero-length and set the 'more' - * flag to ensure that both buffers get discarded + * Re-check previous descriptor, in case it has been filled + * in the mean time. */ - rs->rs_datalen = 0; - rs->rs_more = true; + ret = ath9k_hw_rxprocdesc(ah, ds, rs); + if (ret == -EINPROGRESS) { + /* + * mark descriptor as zero-length and set the 'more' + * flag to ensure that both buffers get discarded + */ + rs->rs_datalen = 0; + rs->rs_more = true; + } } list_del(&bf->list); @@ -985,32 +992,32 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, struct ath_common *common = ath9k_hw_common(ah); struct ieee80211_hdr *hdr; bool discard_current = sc->rx.discard_next; - int ret = 0; /* * Discard corrupt descriptors which are marked in * ath_get_next_rx_buf(). */ - sc->rx.discard_next = rx_stats->rs_more; if (discard_current) - return -EINVAL; + goto corrupt; + + sc->rx.discard_next = false; /* * Discard zero-length packets. */ if (!rx_stats->rs_datalen) { RX_STAT_INC(rx_len_err); - return -EINVAL; + goto corrupt; } - /* - * rs_status follows rs_datalen so if rs_datalen is too large - * we can take a hint that hardware corrupted it, so ignore - * those frames. - */ + /* + * rs_status follows rs_datalen so if rs_datalen is too large + * we can take a hint that hardware corrupted it, so ignore + * those frames. + */ if (rx_stats->rs_datalen > (common->rx_bufsize - ah->caps.rx_status_len)) { RX_STAT_INC(rx_len_err); - return -EINVAL; + goto corrupt; } /* Only use status info from the last fragment */ @@ -1024,10 +1031,8 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, * This is different from the other corrupt descriptor * condition handled above. */ - if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC) { - ret = -EINVAL; - goto exit; - } + if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC) + goto corrupt; hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len); @@ -1043,18 +1048,15 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, if (ath_process_fft(sc, hdr, rx_stats, rx_status->mactime)) RX_STAT_INC(rx_spectral); - ret = -EINVAL; - goto exit; + return -EINVAL; } /* * everything but the rate is checked here, the rate check is done * separately to avoid doing two lookups for a rate for each frame. */ - if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) { - ret = -EINVAL; - goto exit; - } + if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) + return -EINVAL; if (ath_is_mybeacon(common, hdr)) { RX_STAT_INC(rx_beacons); @@ -1064,15 +1066,11 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, /* * This shouldn't happen, but have a safety check anyway. */ - if (WARN_ON(!ah->curchan)) { - ret = -EINVAL; - goto exit; - } + if (WARN_ON(!ah->curchan)) + return -EINVAL; - if (ath9k_process_rate(common, hw, rx_stats, rx_status)) { - ret =-EINVAL; - goto exit; - } + if (ath9k_process_rate(common, hw, rx_stats, rx_status)) + return -EINVAL; ath9k_process_rssi(common, hw, rx_stats, rx_status); @@ -1087,9 +1085,11 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, sc->rx.num_pkts++; #endif -exit: - sc->rx.discard_next = false; - return ret; + return 0; + +corrupt: + sc->rx.discard_next = rx_stats->rs_more; + return -EINVAL; } static void ath9k_rx_skb_postprocess(struct ath_common *common, -- cgit v1.2.3 From 169a1d85d084edeb0736ad80fe439639ac938dcd Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Wed, 19 Feb 2014 17:47:31 +0200 Subject: net,IB/mlx: Bump all Mellanox driver versions Bump all Mellanox driver versions. Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/mlx4.h | 4 ++-- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 4 ++-- drivers/net/ethernet/mellanox/mlx5/core/main.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index 6b65f7795215..7aec6c833973 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -51,8 +51,8 @@ #define DRV_NAME "mlx4_core" #define PFX DRV_NAME ": " -#define DRV_VERSION "1.1" -#define DRV_RELDATE "Dec, 2011" +#define DRV_VERSION "2.2-1" +#define DRV_RELDATE "Feb, 2014" #define MLX4_FS_UDP_UC_EN (1 << 1) #define MLX4_FS_TCP_UC_EN (1 << 2) diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 9ca223bc90fc..b57e8c87a34e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -57,8 +57,8 @@ #include "en_port.h" #define DRV_NAME "mlx4_en" -#define DRV_VERSION "2.0" -#define DRV_RELDATE "Dec 2011" +#define DRV_VERSION "2.2-1" +#define DRV_RELDATE "Feb 2014" #define MLX4_EN_MSG_LEVEL (NETIF_MSG_LINK | NETIF_MSG_IFDOWN) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index a064f06e0cb8..23b7e2d35a93 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -46,8 +46,8 @@ #include "mlx5_core.h" #define DRIVER_NAME "mlx5_core" -#define DRIVER_VERSION "1.0" -#define DRIVER_RELDATE "June 2013" +#define DRIVER_VERSION "2.2-1" +#define DRIVER_RELDATE "Feb 2014" MODULE_AUTHOR("Eli Cohen "); MODULE_DESCRIPTION("Mellanox ConnectX-IB HCA core library"); -- cgit v1.2.3 From fc49beaee2a410402f49fd21c81a37a863b7a9ba Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Mon, 24 Feb 2014 08:54:46 -0500 Subject: qlcnic: Fix function return error check Driver was treating -ve return value as success in case of qlcnic_enable_msi_legacy() failure Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index ba78c7481fa3..149c4b6d340b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -818,7 +818,7 @@ static int qlcnic_82xx_setup_intr(struct qlcnic_adapter *adapter) qlcnic_disable_multi_tx(adapter); err = qlcnic_enable_msi_legacy(adapter); - if (!err) + if (err) return err; } } -- cgit v1.2.3 From b7520d2b59b09eb284e5fc9080d13145f0a8d9fd Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Mon, 24 Feb 2014 08:54:47 -0500 Subject: qlcnic: Fix usage of use_msi and use_msi_x module parameters Once interrupts are enabled, instead of using module parameters, use flags (QLCNIC_MSI_ENABLED and QLCNIC_MSIX_ENABLED) set by driver to check interrupt mode. Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 149c4b6d340b..e10fc8e7fe22 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -3863,7 +3863,7 @@ int qlcnic_validate_rings(struct qlcnic_adapter *adapter, __u32 ring_cnt, strcpy(buf, "Tx"); } - if (!qlcnic_use_msi_x && !qlcnic_use_msi) { + if (!QLCNIC_IS_MSI_FAMILY(adapter)) { netdev_err(netdev, "No RSS/TSS support in INT-x mode\n"); return -EINVAL; } -- cgit v1.2.3 From 46428228b55df144f04cbad023907c177aa00d5f Mon Sep 17 00:00:00 2001 From: Sucheta Chakraborty Date: Mon, 24 Feb 2014 08:54:48 -0500 Subject: qlcnic: Allow any VLAN to be configured from VF. o This patch reverts commit 1414abea048e0835c43600d62808ed8163897227 (qlcnic: Restrict VF from configuring any VLAN mode.) This will allow same multicast address to be used with any VLAN instead of programming seperate (MAC, VLAN) tuples in adapter. This will help save some multicast filters. Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index 09acf15c3a56..e5277a632671 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -13,8 +13,6 @@ #define QLC_VF_MIN_TX_RATE 100 #define QLC_VF_MAX_TX_RATE 9999 #define QLC_MAC_OPCODE_MASK 0x7 -#define QLC_MAC_STAR_ADD 6 -#define QLC_MAC_STAR_DEL 7 #define QLC_VF_FLOOD_BIT BIT_16 #define QLC_FLOOD_MODE 0x5 @@ -1206,13 +1204,6 @@ static int qlcnic_sriov_validate_cfg_macvlan(struct qlcnic_adapter *adapter, struct qlcnic_vport *vp = vf->vp; u8 op, new_op; - if (((cmd->req.arg[1] & QLC_MAC_OPCODE_MASK) == QLC_MAC_STAR_ADD) || - ((cmd->req.arg[1] & QLC_MAC_OPCODE_MASK) == QLC_MAC_STAR_DEL)) { - netdev_err(adapter->netdev, "MAC + any VLAN filter not allowed from VF %d\n", - vf->pci_func); - return -EINVAL; - } - if (!(cmd->req.arg[1] & BIT_8)) return -EINVAL; -- cgit v1.2.3 From 42beb3f2836a6063ceb8134dbac0e32df1deea26 Mon Sep 17 00:00:00 2001 From: Rajesh Borundia Date: Mon, 24 Feb 2014 08:54:49 -0500 Subject: qlcnic: Fix number of rings when we fall back from msix to legacy. o Driver was not re-setting sds ring count to 1 after failing to allocate msi-x interrupts. Signed-off-by: Rajesh Borundia Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 1 + drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 4146664d4d6a..27c4f131863b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -340,6 +340,7 @@ int qlcnic_83xx_setup_intr(struct qlcnic_adapter *adapter) if (qlcnic_sriov_vf_check(adapter)) return -EINVAL; num_msix = 1; + adapter->drv_sds_rings = QLCNIC_SINGLE_RING; adapter->drv_tx_rings = QLCNIC_SINGLE_RING; } } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index e10fc8e7fe22..1222865cfb73 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -816,6 +816,7 @@ static int qlcnic_82xx_setup_intr(struct qlcnic_adapter *adapter) if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) { qlcnic_disable_multi_tx(adapter); + adapter->drv_sds_rings = QLCNIC_SINGLE_RING; err = qlcnic_enable_msi_legacy(adapter); if (err) -- cgit v1.2.3 From 687d705c031916b83953b714917b04d899e23cf5 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 24 Feb 2014 17:04:52 -0300 Subject: net/cxgb4: use remove handler as shutdown handler Without a shutdown handler, T4 cards behave very badly after a kexec. Some firmware calls return errors indicating allocation failures, for example. This is probably because thouse resources were not released by a BYE message to the firmware, for example. Using the remove handler guarantees we will use a well tested path. With this patch I applied, I managed to use kexec multiple times and probe and iSCSI login worked every time. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 43ab35fea48d..34e2488767d9 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -6179,6 +6179,7 @@ static struct pci_driver cxgb4_driver = { .id_table = cxgb4_pci_tbl, .probe = init_one, .remove = remove_one, + .shutdown = remove_one, .err_handler = &cxgb4_eeh, }; -- cgit v1.2.3 From a4572e0c23266d01949a1c134475e3bfa7f788e1 Mon Sep 17 00:00:00 2001 From: Cristian Bercaru Date: Tue, 25 Feb 2014 10:22:48 +0200 Subject: phy: unmask link partner capabilities Masking the link partner's capabilities with local capabilities can be misleading in autonegotiation scenarios such as PAUSE frame autonegotiation. This patch calculates the join between the local capabilities and the link parner capabilities, when it determines the speed and duplex settings, but does not mask any of the link partner capabilities when it calculates PAUSE frame settings. Signed-off-by: Cristian Bercaru Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 82514e72b3d8..4b970f7624c0 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -916,6 +916,8 @@ int genphy_read_status(struct phy_device *phydev) int err; int lpa; int lpagb = 0; + int common_adv; + int common_adv_gb = 0; /* Update the link, but return if there was an error */ err = genphy_update_link(phydev); @@ -937,7 +939,7 @@ int genphy_read_status(struct phy_device *phydev) phydev->lp_advertising = mii_stat1000_to_ethtool_lpa_t(lpagb); - lpagb &= adv << 2; + common_adv_gb = lpagb & adv << 2; } lpa = phy_read(phydev, MII_LPA); @@ -950,25 +952,25 @@ int genphy_read_status(struct phy_device *phydev) if (adv < 0) return adv; - lpa &= adv; + common_adv = lpa & adv; phydev->speed = SPEED_10; phydev->duplex = DUPLEX_HALF; phydev->pause = 0; phydev->asym_pause = 0; - if (lpagb & (LPA_1000FULL | LPA_1000HALF)) { + if (common_adv_gb & (LPA_1000FULL | LPA_1000HALF)) { phydev->speed = SPEED_1000; - if (lpagb & LPA_1000FULL) + if (common_adv_gb & LPA_1000FULL) phydev->duplex = DUPLEX_FULL; - } else if (lpa & (LPA_100FULL | LPA_100HALF)) { + } else if (common_adv & (LPA_100FULL | LPA_100HALF)) { phydev->speed = SPEED_100; - if (lpa & LPA_100FULL) + if (common_adv & LPA_100FULL) phydev->duplex = DUPLEX_FULL; } else - if (lpa & LPA_10FULL) + if (common_adv & LPA_10FULL) phydev->duplex = DUPLEX_FULL; if (phydev->duplex == DUPLEX_FULL) { -- cgit v1.2.3 From 8f355e5cee63c2c0c145d8206c4245d0189f47ff Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Tue, 25 Feb 2014 13:17:59 +0000 Subject: sfc: check for NULL efx->ptp_data in efx_ptp_event If we receive a PTP event from the NIC when we haven't set up PTP state in the driver, we attempt to read through a NULL pointer efx->ptp_data, triggering a panic. Signed-off-by: Edward Cree Acked-by: Shradha Shah Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/ptp.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c index eb75fbd11a01..d7a36829649a 100644 --- a/drivers/net/ethernet/sfc/ptp.c +++ b/drivers/net/ethernet/sfc/ptp.c @@ -1668,6 +1668,13 @@ void efx_ptp_event(struct efx_nic *efx, efx_qword_t *ev) struct efx_ptp_data *ptp = efx->ptp_data; int code = EFX_QWORD_FIELD(*ev, MCDI_EVENT_CODE); + if (!ptp) { + if (net_ratelimit()) + netif_warn(efx, drv, efx->net_dev, + "Received PTP event but PTP not set up\n"); + return; + } + if (!ptp->enabled) return; -- cgit v1.2.3 From 5e5b066535f0ee58e5de3a2db5fb56fa3cd7e3b1 Mon Sep 17 00:00:00 2001 From: dingtianhong Date: Wed, 26 Feb 2014 11:05:22 +0800 Subject: bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh Cc: Veaceslav Falico Cc: Andy Gospodarek Signed-off-by: Ding Tianhong Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 22 ++++++++++++++++++++-- drivers/net/bonding/bond_main.c | 41 ++++++++++++++++++++++++++--------------- drivers/net/bonding/bonding.h | 34 +++++++++++++++++++++++++++++----- 3 files changed, 75 insertions(+), 22 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 6d20fbde8d43..6826e4f61060 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -181,7 +181,7 @@ static inline int __agg_has_partner(struct aggregator *agg) */ static inline void __disable_port(struct port *port) { - bond_set_slave_inactive_flags(port->slave); + bond_set_slave_inactive_flags(port->slave, BOND_SLAVE_NOTIFY_LATER); } /** @@ -193,7 +193,7 @@ static inline void __enable_port(struct port *port) struct slave *slave = port->slave; if ((slave->link == BOND_LINK_UP) && IS_UP(slave->dev)) - bond_set_slave_active_flags(slave); + bond_set_slave_active_flags(slave, BOND_SLAVE_NOTIFY_LATER); } /** @@ -2062,6 +2062,7 @@ void bond_3ad_state_machine_handler(struct work_struct *work) struct list_head *iter; struct slave *slave; struct port *port; + bool should_notify_rtnl = BOND_SLAVE_NOTIFY_LATER; read_lock(&bond->lock); rcu_read_lock(); @@ -2119,8 +2120,25 @@ void bond_3ad_state_machine_handler(struct work_struct *work) } re_arm: + bond_for_each_slave_rcu(bond, slave, iter) { + if (slave->should_notify) { + should_notify_rtnl = BOND_SLAVE_NOTIFY_NOW; + break; + } + } rcu_read_unlock(); read_unlock(&bond->lock); + + if (should_notify_rtnl && rtnl_trylock()) { + bond_for_each_slave(bond, slave, iter) { + if (slave->should_notify) { + rtmsg_ifinfo(RTM_NEWLINK, slave->dev, 0, + GFP_KERNEL); + slave->should_notify = 0; + } + } + rtnl_unlock(); + } queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks); } diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 1c6104d3501d..e02029bbf5cc 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -829,21 +829,25 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active) if (bond_is_lb(bond)) { bond_alb_handle_active_change(bond, new_active); if (old_active) - bond_set_slave_inactive_flags(old_active); + bond_set_slave_inactive_flags(old_active, + BOND_SLAVE_NOTIFY_NOW); if (new_active) - bond_set_slave_active_flags(new_active); + bond_set_slave_active_flags(new_active, + BOND_SLAVE_NOTIFY_NOW); } else { rcu_assign_pointer(bond->curr_active_slave, new_active); } if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) { if (old_active) - bond_set_slave_inactive_flags(old_active); + bond_set_slave_inactive_flags(old_active, + BOND_SLAVE_NOTIFY_NOW); if (new_active) { bool should_notify_peers = false; - bond_set_slave_active_flags(new_active); + bond_set_slave_active_flags(new_active, + BOND_SLAVE_NOTIFY_NOW); if (bond->params.fail_over_mac) bond_do_fail_over_mac(bond, new_active, @@ -1463,14 +1467,15 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) switch (bond->params.mode) { case BOND_MODE_ACTIVEBACKUP: - bond_set_slave_inactive_flags(new_slave); + bond_set_slave_inactive_flags(new_slave, + BOND_SLAVE_NOTIFY_NOW); break; case BOND_MODE_8023AD: /* in 802.3ad mode, the internal mechanism * will activate the slaves in the selected * aggregator */ - bond_set_slave_inactive_flags(new_slave); + bond_set_slave_inactive_flags(new_slave, BOND_SLAVE_NOTIFY_NOW); /* if this is the first slave */ if (!prev_slave) { SLAVE_AD_INFO(new_slave).id = 1; @@ -1488,7 +1493,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) case BOND_MODE_TLB: case BOND_MODE_ALB: bond_set_active_slave(new_slave); - bond_set_slave_inactive_flags(new_slave); + bond_set_slave_inactive_flags(new_slave, BOND_SLAVE_NOTIFY_NOW); break; default: pr_debug("This slave is always active in trunk mode\n"); @@ -2015,7 +2020,8 @@ static void bond_miimon_commit(struct bonding *bond) if (bond->params.mode == BOND_MODE_ACTIVEBACKUP || bond->params.mode == BOND_MODE_8023AD) - bond_set_slave_inactive_flags(slave); + bond_set_slave_inactive_flags(slave, + BOND_SLAVE_NOTIFY_NOW); pr_info("%s: link status definitely down for interface %s, disabling it\n", bond->dev->name, slave->dev->name); @@ -2562,7 +2568,8 @@ static void bond_ab_arp_commit(struct bonding *bond) slave->link = BOND_LINK_UP; if (bond->current_arp_slave) { bond_set_slave_inactive_flags( - bond->current_arp_slave); + bond->current_arp_slave, + BOND_SLAVE_NOTIFY_NOW); bond->current_arp_slave = NULL; } @@ -2582,7 +2589,8 @@ static void bond_ab_arp_commit(struct bonding *bond) slave->link_failure_count++; slave->link = BOND_LINK_DOWN; - bond_set_slave_inactive_flags(slave); + bond_set_slave_inactive_flags(slave, + BOND_SLAVE_NOTIFY_NOW); pr_info("%s: link status definitely down for interface %s, disabling it\n", bond->dev->name, slave->dev->name); @@ -2657,7 +2665,7 @@ static bool bond_ab_arp_probe(struct bonding *bond) } } - bond_set_slave_inactive_flags(curr_arp_slave); + bond_set_slave_inactive_flags(curr_arp_slave, BOND_SLAVE_NOTIFY_NOW); bond_for_each_slave(bond, slave, iter) { if (!found && !before && IS_UP(slave->dev)) @@ -2677,7 +2685,8 @@ static bool bond_ab_arp_probe(struct bonding *bond) if (slave->link_failure_count < UINT_MAX) slave->link_failure_count++; - bond_set_slave_inactive_flags(slave); + bond_set_slave_inactive_flags(slave, + BOND_SLAVE_NOTIFY_NOW); pr_info("%s: backup interface %s is now down.\n", bond->dev->name, slave->dev->name); @@ -2695,7 +2704,7 @@ static bool bond_ab_arp_probe(struct bonding *bond) } new_slave->link = BOND_LINK_BACK; - bond_set_slave_active_flags(new_slave); + bond_set_slave_active_flags(new_slave, BOND_SLAVE_NOTIFY_NOW); bond_arp_send_all(bond, new_slave); new_slave->jiffies = jiffies; rcu_assign_pointer(bond->current_arp_slave, new_slave); @@ -3046,9 +3055,11 @@ static int bond_open(struct net_device *bond_dev) bond_for_each_slave(bond, slave, iter) { if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP) && (slave != bond->curr_active_slave)) { - bond_set_slave_inactive_flags(slave); + bond_set_slave_inactive_flags(slave, + BOND_SLAVE_NOTIFY_NOW); } else { - bond_set_slave_active_flags(slave); + bond_set_slave_active_flags(slave, + BOND_SLAVE_NOTIFY_NOW); } } read_unlock(&bond->curr_slave_lock); diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 86ccfb9f71cc..9b280ac8c454 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -195,7 +195,8 @@ struct slave { s8 new_link; u8 backup:1, /* indicates backup slave. Value corresponds with BOND_STATE_ACTIVE and BOND_STATE_BACKUP */ - inactive:1; /* indicates inactive slave */ + inactive:1, /* indicates inactive slave */ + should_notify:1; /* indicateds whether the state changed */ u8 duplex; u32 original_mtu; u32 link_failure_count; @@ -303,6 +304,24 @@ static inline void bond_set_backup_slave(struct slave *slave) } } +static inline void bond_set_slave_state(struct slave *slave, + int slave_state, bool notify) +{ + if (slave->backup == slave_state) + return; + + slave->backup = slave_state; + if (notify) { + rtmsg_ifinfo(RTM_NEWLINK, slave->dev, 0, GFP_KERNEL); + slave->should_notify = 0; + } else { + if (slave->should_notify) + slave->should_notify = 0; + else + slave->should_notify = 1; + } +} + static inline void bond_slave_state_change(struct bonding *bond) { struct list_head *iter; @@ -343,6 +362,9 @@ static inline bool bond_is_active_slave(struct slave *slave) #define BOND_ARP_VALIDATE_ALL (BOND_ARP_VALIDATE_ACTIVE | \ BOND_ARP_VALIDATE_BACKUP) +#define BOND_SLAVE_NOTIFY_NOW true +#define BOND_SLAVE_NOTIFY_LATER false + static inline int slave_do_arp_validate(struct bonding *bond, struct slave *slave) { @@ -394,17 +416,19 @@ static inline void bond_netpoll_send_skb(const struct slave *slave, } #endif -static inline void bond_set_slave_inactive_flags(struct slave *slave) +static inline void bond_set_slave_inactive_flags(struct slave *slave, + bool notify) { if (!bond_is_lb(slave->bond)) - bond_set_backup_slave(slave); + bond_set_slave_state(slave, BOND_STATE_BACKUP, notify); if (!slave->bond->params.all_slaves_active) slave->inactive = 1; } -static inline void bond_set_slave_active_flags(struct slave *slave) +static inline void bond_set_slave_active_flags(struct slave *slave, + bool notify) { - bond_set_active_slave(slave); + bond_set_slave_state(slave, BOND_STATE_ACTIVE, notify); slave->inactive = 0; } -- cgit v1.2.3 From b0929915e0356acedf59504521c097ecada88b19 Mon Sep 17 00:00:00 2001 From: dingtianhong Date: Wed, 26 Feb 2014 11:05:23 +0800 Subject: bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh Cc: Veaceslav Falico Cc: Andy Gospodarek Signed-off-by: Ding Tianhong Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 8 +---- drivers/net/bonding/bond_main.c | 80 +++++++++++++++++++++-------------------- drivers/net/bonding/bonding.h | 13 +++++++ 3 files changed, 55 insertions(+), 46 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 6826e4f61060..dcde56057fe1 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -2130,13 +2130,7 @@ re_arm: read_unlock(&bond->lock); if (should_notify_rtnl && rtnl_trylock()) { - bond_for_each_slave(bond, slave, iter) { - if (slave->should_notify) { - rtmsg_ifinfo(RTM_NEWLINK, slave->dev, 0, - GFP_KERNEL); - slave->should_notify = 0; - } - } + bond_slave_state_notify(bond); rtnl_unlock(); } queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks); diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index e02029bbf5cc..82b70ff1fd28 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2623,17 +2623,17 @@ do_failover: /* * Send ARP probes for active-backup mode ARP monitor. + * + * Called with rcu_read_lock hold. */ static bool bond_ab_arp_probe(struct bonding *bond) { struct slave *slave, *before = NULL, *new_slave = NULL, - *curr_arp_slave, *curr_active_slave; + *curr_arp_slave = rcu_dereference(bond->current_arp_slave), + *curr_active_slave = rcu_dereference(bond->curr_active_slave); struct list_head *iter; bool found = false; - - rcu_read_lock(); - curr_arp_slave = rcu_dereference(bond->current_arp_slave); - curr_active_slave = rcu_dereference(bond->curr_active_slave); + bool should_notify_rtnl = BOND_SLAVE_NOTIFY_LATER; if (curr_arp_slave && curr_active_slave) pr_info("PROBE: c_arp %s && cas %s BAD\n", @@ -2642,32 +2642,23 @@ static bool bond_ab_arp_probe(struct bonding *bond) if (curr_active_slave) { bond_arp_send_all(bond, curr_active_slave); - rcu_read_unlock(); - return true; + return should_notify_rtnl; } - rcu_read_unlock(); /* if we don't have a curr_active_slave, search for the next available * backup slave from the current_arp_slave and make it the candidate * for becoming the curr_active_slave */ - if (!rtnl_trylock()) - return false; - /* curr_arp_slave might have gone away */ - curr_arp_slave = ACCESS_ONCE(bond->current_arp_slave); - if (!curr_arp_slave) { - curr_arp_slave = bond_first_slave(bond); - if (!curr_arp_slave) { - rtnl_unlock(); - return true; - } + curr_arp_slave = bond_first_slave_rcu(bond); + if (!curr_arp_slave) + return should_notify_rtnl; } - bond_set_slave_inactive_flags(curr_arp_slave, BOND_SLAVE_NOTIFY_NOW); + bond_set_slave_inactive_flags(curr_arp_slave, BOND_SLAVE_NOTIFY_LATER); - bond_for_each_slave(bond, slave, iter) { + bond_for_each_slave_rcu(bond, slave, iter) { if (!found && !before && IS_UP(slave->dev)) before = slave; @@ -2686,7 +2677,7 @@ static bool bond_ab_arp_probe(struct bonding *bond) slave->link_failure_count++; bond_set_slave_inactive_flags(slave, - BOND_SLAVE_NOTIFY_NOW); + BOND_SLAVE_NOTIFY_LATER); pr_info("%s: backup interface %s is now down.\n", bond->dev->name, slave->dev->name); @@ -2698,26 +2689,31 @@ static bool bond_ab_arp_probe(struct bonding *bond) if (!new_slave && before) new_slave = before; - if (!new_slave) { - rtnl_unlock(); - return true; - } + if (!new_slave) + goto check_state; new_slave->link = BOND_LINK_BACK; - bond_set_slave_active_flags(new_slave, BOND_SLAVE_NOTIFY_NOW); + bond_set_slave_active_flags(new_slave, BOND_SLAVE_NOTIFY_LATER); bond_arp_send_all(bond, new_slave); new_slave->jiffies = jiffies; rcu_assign_pointer(bond->current_arp_slave, new_slave); - rtnl_unlock(); - return true; +check_state: + bond_for_each_slave_rcu(bond, slave, iter) { + if (slave->should_notify) { + should_notify_rtnl = BOND_SLAVE_NOTIFY_NOW; + break; + } + } + return should_notify_rtnl; } static void bond_activebackup_arp_mon(struct work_struct *work) { struct bonding *bond = container_of(work, struct bonding, arp_work.work); - bool should_notify_peers = false, should_commit = false; + bool should_notify_peers = false; + bool should_notify_rtnl = false; int delta_in_ticks; delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval); @@ -2726,11 +2722,12 @@ static void bond_activebackup_arp_mon(struct work_struct *work) goto re_arm; rcu_read_lock(); + should_notify_peers = bond_should_notify_peers(bond); - should_commit = bond_ab_arp_inspect(bond); - rcu_read_unlock(); - if (should_commit) { + if (bond_ab_arp_inspect(bond)) { + rcu_read_unlock(); + /* Race avoidance with bond_close flush of workqueue */ if (!rtnl_trylock()) { delta_in_ticks = 1; @@ -2739,23 +2736,28 @@ static void bond_activebackup_arp_mon(struct work_struct *work) } bond_ab_arp_commit(bond); + rtnl_unlock(); + rcu_read_lock(); } - if (!bond_ab_arp_probe(bond)) { - /* rtnl locking failed, re-arm */ - delta_in_ticks = 1; - should_notify_peers = false; - } + should_notify_rtnl = bond_ab_arp_probe(bond); + rcu_read_unlock(); re_arm: if (bond->params.arp_interval) queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks); - if (should_notify_peers) { + if (should_notify_peers || should_notify_rtnl) { if (!rtnl_trylock()) return; - call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, bond->dev); + + if (should_notify_peers) + call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, + bond->dev); + if (should_notify_rtnl) + bond_slave_state_notify(bond); + rtnl_unlock(); } } diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 9b280ac8c454..2b0fdec695f7 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -335,6 +335,19 @@ static inline void bond_slave_state_change(struct bonding *bond) } } +static inline void bond_slave_state_notify(struct bonding *bond) +{ + struct list_head *iter; + struct slave *tmp; + + bond_for_each_slave(bond, tmp, iter) { + if (tmp->should_notify) { + rtmsg_ifinfo(RTM_NEWLINK, tmp->dev, 0, GFP_KERNEL); + tmp->should_notify = 0; + } + } +} + static inline int bond_slave_state(struct slave *slave) { return slave->backup; -- cgit v1.2.3 From e5fe0cd442e50f156bb54f5385b19eda50a13ccd Mon Sep 17 00:00:00 2001 From: Freddy Xin Date: Wed, 26 Feb 2014 16:54:31 +0800 Subject: AX88179_178A: Add VID:DID for Lenovo OneLinkDock Gigabit LAN Add VID:DID for Lenovo OneLinkDock Gigabit LAN Signed-off-by: Freddy Xin Signed-off-by: David S. Miller --- drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 955df81a4358..460e82392b08 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1421,6 +1421,19 @@ static const struct driver_info samsung_info = { .tx_fixup = ax88179_tx_fixup, }; +static const struct driver_info lenovo_info = { + .description = "Lenovo OneLinkDock Gigabit LAN", + .bind = ax88179_bind, + .unbind = ax88179_unbind, + .status = ax88179_status, + .link_reset = ax88179_link_reset, + .reset = ax88179_reset, + .stop = ax88179_stop, + .flags = FLAG_ETHER | FLAG_FRAMING_AX, + .rx_fixup = ax88179_rx_fixup, + .tx_fixup = ax88179_tx_fixup, +}; + static const struct usb_device_id products[] = { { /* ASIX AX88179 10/100/1000 */ @@ -1438,6 +1451,10 @@ static const struct usb_device_id products[] = { /* Samsung USB Ethernet Adapter */ USB_DEVICE(0x04e8, 0xa100), .driver_info = (unsigned long)&samsung_info, +}, { + /* Lenovo OneLinkDock Gigabit LAN */ + USB_DEVICE(0x17ef, 0x304b), + .driver_info = (unsigned long)&lenovo_info, }, { }, }; -- cgit v1.2.3 From ee6154e11eeccd4ae32c4881415dbd902a869592 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Wed, 26 Feb 2014 14:20:30 +0100 Subject: bonding: fix a div error caused by the slave release path There's a bug in the slave release function which leads the transmit functions which use the bond->slave_cnt to a div by 0 because we might just have released our last slave and made slave_cnt == 0 but at the same time we may have a transmitter after the check for an empty list which will fetch it and use it in the slave id calculation. Fix it by moving the slave_cnt after synchronize_rcu so if this was our last slave any new transmitters will see an empty slave list which is checked after rcu lock but before calling the mode transmit functions which rely on bond->slave_cnt. Fixes: 278b208375 ("bonding: initial RCU conversion") CC: Veaceslav Falico CC: Andy Gospodarek CC: Jay Vosburgh CC: David S. Miller Signed-off-by: Nikolay Aleksandrov Acked-by: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 82b70ff1fd28..b47fa0421e01 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1659,9 +1659,6 @@ static int __bond_release_one(struct net_device *bond_dev, return -EINVAL; } - /* release the slave from its bond */ - bond->slave_cnt--; - bond_sysfs_slave_del(slave); bond_upper_dev_unlink(bond_dev, slave_dev); @@ -1743,6 +1740,7 @@ static int __bond_release_one(struct net_device *bond_dev, unblock_netpoll_tx(); synchronize_rcu(); + bond->slave_cnt--; if (!bond_has_slaves(bond)) { call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev); -- cgit v1.2.3 From 09a89c219baf0f116387efc928e325cf23630f20 Mon Sep 17 00:00:00 2001 From: Jiri Bohac Date: Wed, 26 Feb 2014 18:20:13 +0100 Subject: bonding: disallow enslaving a bond to itself Enslaving a bond to itself leads to an endless loop and hangs the kernel. Signed-off-by: Jiri Bohac Tested-by: Ding Tianhong Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b47fa0421e01..e5628fc725c3 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1197,6 +1197,11 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) return -EBUSY; } + if (bond_dev == slave_dev) { + pr_err("%s: cannot enslave bond to itself.\n", bond_dev->name); + return -EPERM; + } + /* vlan challenged mutual exclusion */ /* no need to lock since we're protected by rtnl_lock */ if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) { -- cgit v1.2.3 From e7eb65cac0720df8b3946af7f7a9dc363cf0a814 Mon Sep 17 00:00:00 2001 From: Max Stepanov Date: Sun, 16 Feb 2014 16:36:57 +0200 Subject: iwlwifi: mvm: change of listen interval from 70 to 10 Some APs reject STA association request if a listen interval value exceeds a threshold of 10. Thus, for example, Cisco APs may deny STA associations returning status code 12 (Association denied due to reason outside the scope of 802.11 standard) in the association response frame. Fixing the issue by setting the default IWL_CONN_MAX_LISTEN_INTERVAL value from 70 to 10. Cc: [3.10+] Signed-off-by: Max Stepanov Reviewed-by: Alexander Bondar Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mvm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index e4ead86f06d6..2b0ba1fc3c82 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -152,7 +152,7 @@ enum iwl_power_scheme { IWL_POWER_SCHEME_LP }; -#define IWL_CONN_MAX_LISTEN_INTERVAL 70 +#define IWL_CONN_MAX_LISTEN_INTERVAL 10 #define IWL_UAPSD_AC_INFO (IEEE80211_WMM_IE_STA_QOSINFO_AC_VO |\ IEEE80211_WMM_IE_STA_QOSINFO_AC_VI |\ IEEE80211_WMM_IE_STA_QOSINFO_AC_BK |\ -- cgit v1.2.3 From 143582c6847cb285b361804c613127c25de60ca4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 25 Feb 2014 10:37:15 +0100 Subject: iwlwifi: fix TX status for aggregated packets Only the first packet is currently handled correctly, but then all others are assumed to have failed which is problematic. Fix this, marking them all successful instead (since if they're not then the firmware will have transmitted them as single frames.) This fixes the lost packet reporting. Also do a tiny variable scoping cleanup. Cc: Signed-off-by: Johannes Berg [Add the dvm part] Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/dvm/tx.c | 14 +++++++++----- drivers/net/wireless/iwlwifi/mvm/tx.c | 18 +++++++++--------- 2 files changed, 18 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index a6839dfcb82d..398dd096674c 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -1291,8 +1291,6 @@ int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, struct iwl_compressed_ba_resp *ba_resp = (void *)pkt->data; struct iwl_ht_agg *agg; struct sk_buff_head reclaimed_skbs; - struct ieee80211_tx_info *info; - struct ieee80211_hdr *hdr; struct sk_buff *skb; int sta_id; int tid; @@ -1379,22 +1377,28 @@ int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, freed = 0; skb_queue_walk(&reclaimed_skbs, skb) { - hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_hdr *hdr = (void *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); if (ieee80211_is_data_qos(hdr->frame_control)) freed++; else WARN_ON_ONCE(1); - info = IEEE80211_SKB_CB(skb); iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]); + memset(&info->status, 0, sizeof(info->status)); + /* Packet was transmitted successfully, failures come as single + * frames because before failing a frame the firmware transmits + * it without aggregation at least once. + */ + info->flags |= IEEE80211_TX_STAT_ACK; + if (freed == 1) { /* this is the first skb we deliver in this batch */ /* put the rate scaling data there */ info = IEEE80211_SKB_CB(skb); memset(&info->status, 0, sizeof(info->status)); - info->flags |= IEEE80211_TX_STAT_ACK; info->flags |= IEEE80211_TX_STAT_AMPDU; info->status.ampdu_ack_len = ba_resp->txed_2_done; info->status.ampdu_len = ba_resp->txed; diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index 4df12fa9d336..76ee486039d7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -822,16 +822,12 @@ int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, struct iwl_mvm_ba_notif *ba_notif = (void *)pkt->data; struct sk_buff_head reclaimed_skbs; struct iwl_mvm_tid_data *tid_data; - struct ieee80211_tx_info *info; struct ieee80211_sta *sta; struct iwl_mvm_sta *mvmsta; - struct ieee80211_hdr *hdr; struct sk_buff *skb; int sta_id, tid, freed; - /* "flow" corresponds to Tx queue */ u16 scd_flow = le16_to_cpu(ba_notif->scd_flow); - /* "ssn" is start of block-ack Tx window, corresponds to index * (in Tx queue's circular buffer) of first TFD/frame in window */ u16 ba_resp_scd_ssn = le16_to_cpu(ba_notif->scd_ssn); @@ -888,22 +884,26 @@ int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, freed = 0; skb_queue_walk(&reclaimed_skbs, skb) { - hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_hdr *hdr = (void *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); if (ieee80211_is_data_qos(hdr->frame_control)) freed++; else WARN_ON_ONCE(1); - info = IEEE80211_SKB_CB(skb); iwl_trans_free_tx_cmd(mvm->trans, info->driver_data[1]); + memset(&info->status, 0, sizeof(info->status)); + /* Packet was transmitted successfully, failures come as single + * frames because before failing a frame the firmware transmits + * it without aggregation at least once. + */ + info->flags |= IEEE80211_TX_STAT_ACK; + if (freed == 1) { /* this is the first skb we deliver in this batch */ /* put the rate scaling data there */ - info = IEEE80211_SKB_CB(skb); - memset(&info->status, 0, sizeof(info->status)); - info->flags |= IEEE80211_TX_STAT_ACK; info->flags |= IEEE80211_TX_STAT_AMPDU; info->status.ampdu_ack_len = ba_notif->txed_2_done; info->status.ampdu_len = ba_notif->txed; -- cgit v1.2.3 From babe723d6d733a1045bb44ab82fbe27bdfa2bff8 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 27 Feb 2014 15:42:26 +0200 Subject: bnx2x: Add missing bit in default Tx switching Commit c14db2025 "bnx2x: Correct default Tx switching behaviour" supposedly changed the default Tx switching behaviour, but was missing the fastpath change required for FW to pass packets from PFs to VFs. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 66c0df78c3ff..dbcff509dc3f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3875,7 +3875,9 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) xmit_type); } - /* Add the macs to the parsing BD this is a vf */ + /* Add the macs to the parsing BD if this is a vf or if + * Tx Switching is enabled. + */ if (IS_VF(bp)) { /* override GRE parameters in BD */ bnx2x_set_fw_mac_addr(&pbd_e2->data.mac_addr.src_hi, @@ -3883,6 +3885,11 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) &pbd_e2->data.mac_addr.src_lo, eth->h_source); + bnx2x_set_fw_mac_addr(&pbd_e2->data.mac_addr.dst_hi, + &pbd_e2->data.mac_addr.dst_mid, + &pbd_e2->data.mac_addr.dst_lo, + eth->h_dest); + } else if (bp->flags & TX_SWITCHING) { bnx2x_set_fw_mac_addr(&pbd_e2->data.mac_addr.dst_hi, &pbd_e2->data.mac_addr.dst_mid, &pbd_e2->data.mac_addr.dst_lo, -- cgit v1.2.3 From adb07df1e039e9fe43e66aeea8b4771f83659dbb Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Wed, 26 Feb 2014 20:11:22 -0800 Subject: mwifiex: do not advertise usb autosuspend support As many Surface Pro I & II users have found out, the mwifiex_usb doesn't support usb autosuspend, and it has caused some system stability issues. Bug 69661 - mwifiex_usb on MS Surface Pro 1 is unstable Bug 60815 - Interface hangs in mwifiex_usb Bug 64111 - mwifiex_usb USB8797 crash failed to get signal information USB autosuspend get triggered when Surface Pro's AC power is removed or powertop enables power saving on USB8797 device. Driver's suspend handler is called here, but resume handler won't be called until the AC power is put back on or powertop disables power saving for USB8797. We need to refactor the suspend/resume handlers to support usb autosuspend properly. For now let's just remove it. Cc: # 3.5+ Signed-off-by: Bing Zhao Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/usb.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c index cb6b70a1b34d..208748804a55 100644 --- a/drivers/net/wireless/mwifiex/usb.c +++ b/drivers/net/wireless/mwifiex/usb.c @@ -525,13 +525,6 @@ static int mwifiex_usb_resume(struct usb_interface *intf) MWIFIEX_BSS_ROLE_ANY), MWIFIEX_ASYNC_CMD); -#ifdef CONFIG_PM - /* Resume handler may be called due to remote wakeup, - * force to exit suspend anyway - */ - usb_disable_autosuspend(card->udev); -#endif /* CONFIG_PM */ - return 0; } @@ -571,7 +564,6 @@ static struct usb_driver mwifiex_usb_driver = { .id_table = mwifiex_usb_table, .suspend = mwifiex_usb_suspend, .resume = mwifiex_usb_resume, - .supports_autosuspend = 1, }; static int mwifiex_usb_tx_init(struct mwifiex_adapter *adapter) -- cgit v1.2.3 From d7b95315cc7f441418845a165ee56df723941487 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 28 Feb 2014 15:05:10 -0800 Subject: tg3: Don't check undefined error bits in RXBD Redefine the RXD_ERR_MASK to include only relevant error bits. This fixes a customer reported issue of randomly dropping packets on the 5719. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 3 +-- drivers/net/ethernet/broadcom/tg3.h | 6 +++++- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 3167ed6593b0..3b6d0ba86c71 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -6843,8 +6843,7 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget) work_mask |= opaque_key; - if ((desc->err_vlan & RXD_ERR_MASK) != 0 && - (desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII)) { + if (desc->err_vlan & RXD_ERR_MASK) { drop_it: tg3_recycle_rx(tnapi, tpr, opaque_key, desc_idx, *post_ptr); diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index ef472385bce4..04321e5a356e 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -2608,7 +2608,11 @@ struct tg3_rx_buffer_desc { #define RXD_ERR_TOO_SMALL 0x00400000 #define RXD_ERR_NO_RESOURCES 0x00800000 #define RXD_ERR_HUGE_FRAME 0x01000000 -#define RXD_ERR_MASK 0xffff0000 + +#define RXD_ERR_MASK (RXD_ERR_BAD_CRC | RXD_ERR_COLLISION | \ + RXD_ERR_LINK_LOST | RXD_ERR_PHY_DECODE | \ + RXD_ERR_MAC_ABRT | RXD_ERR_TOO_SMALL | \ + RXD_ERR_NO_RESOURCES | RXD_ERR_HUGE_FRAME) u32 reserved; u32 opaque; -- cgit v1.2.3 From 877767dccf5c35d4ed245701956effb72af77d52 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Fri, 28 Feb 2014 14:14:03 +0100 Subject: bna: fix vlan tag stripping and implement its toggling The recent commit "fe1624c bna: RX Filter Enhancements" disables VLAN tag stripping if the NIC is in promiscuous mode. This causes __vlan_hwaccel_put_tag() is called when the stripping is disabled. Because of this VLAN over bna does not work and causes BUGs in conjunction with openvswitch like this: Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad.c | 40 ++++++++++++++++++++++++--------- 1 file changed, 30 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c index cf64f3d0b60d..4ad1187e82fb 100644 --- a/drivers/net/ethernet/brocade/bna/bnad.c +++ b/drivers/net/ethernet/brocade/bna/bnad.c @@ -707,7 +707,8 @@ bnad_cq_process(struct bnad *bnad, struct bna_ccb *ccb, int budget) else skb_checksum_none_assert(skb); - if (flags & BNA_CQ_EF_VLAN) + if ((flags & BNA_CQ_EF_VLAN) && + (bnad->netdev->features & NETIF_F_HW_VLAN_CTAG_RX)) __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), ntohs(cmpl->vlan_tag)); if (BNAD_RXBUF_IS_SK_BUFF(unmap_q->type)) @@ -2094,7 +2095,9 @@ bnad_init_rx_config(struct bnad *bnad, struct bna_rx_config *rx_config) rx_config->q1_buf_size = BFI_SMALL_RXBUF_SIZE; } - rx_config->vlan_strip_status = BNA_STATUS_T_ENABLED; + rx_config->vlan_strip_status = + (bnad->netdev->features & NETIF_F_HW_VLAN_CTAG_RX) ? + BNA_STATUS_T_ENABLED : BNA_STATUS_T_DISABLED; } static void @@ -3245,11 +3248,6 @@ bnad_set_rx_mode(struct net_device *netdev) BNA_RXMODE_ALLMULTI; bna_rx_mode_set(bnad->rx_info[0].rx, new_mode, mode_mask, NULL); - if (bnad->cfg_flags & BNAD_CF_PROMISC) - bna_rx_vlan_strip_disable(bnad->rx_info[0].rx); - else - bna_rx_vlan_strip_enable(bnad->rx_info[0].rx); - spin_unlock_irqrestore(&bnad->bna_lock, flags); } @@ -3374,6 +3372,27 @@ bnad_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid) return 0; } +static int bnad_set_features(struct net_device *dev, netdev_features_t features) +{ + struct bnad *bnad = netdev_priv(dev); + netdev_features_t changed = features ^ dev->features; + + if ((changed & NETIF_F_HW_VLAN_CTAG_RX) && netif_running(dev)) { + unsigned long flags; + + spin_lock_irqsave(&bnad->bna_lock, flags); + + if (features & NETIF_F_HW_VLAN_CTAG_RX) + bna_rx_vlan_strip_enable(bnad->rx_info[0].rx); + else + bna_rx_vlan_strip_disable(bnad->rx_info[0].rx); + + spin_unlock_irqrestore(&bnad->bna_lock, flags); + } + + return 0; +} + #ifdef CONFIG_NET_POLL_CONTROLLER static void bnad_netpoll(struct net_device *netdev) @@ -3421,6 +3440,7 @@ static const struct net_device_ops bnad_netdev_ops = { .ndo_change_mtu = bnad_change_mtu, .ndo_vlan_rx_add_vid = bnad_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = bnad_vlan_rx_kill_vid, + .ndo_set_features = bnad_set_features, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = bnad_netpoll #endif @@ -3433,14 +3453,14 @@ bnad_netdev_init(struct bnad *bnad, bool using_dac) netdev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | - NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_HW_VLAN_CTAG_TX; + NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_HW_VLAN_CTAG_TX | + NETIF_F_HW_VLAN_CTAG_RX; netdev->vlan_features = NETIF_F_SG | NETIF_F_HIGHDMA | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_TSO | NETIF_F_TSO6; - netdev->features |= netdev->hw_features | - NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER; + netdev->features |= netdev->hw_features | NETIF_F_HW_VLAN_CTAG_FILTER; if (using_dac) netdev->features |= NETIF_F_HIGHDMA; -- cgit v1.2.3 From 25d54fe5657f74766f2c79ad1267320793403f9e Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 2 Mar 2014 17:29:33 +0100 Subject: b44: add calls to phy_{start,stop} When support for external phys was added to b44, the calls to start and stop the phy were missing in the mac driver. This adds the calls to phy_start() and phy_stop(). Signed-off-by: Hauke Mehrtens Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/b44.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 1f7b5aa114fa..e8046e1ebd1c 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -1484,6 +1484,10 @@ static int b44_open(struct net_device *dev) add_timer(&bp->timer); b44_enable_ints(bp); + + if (bp->flags & B44_FLAG_EXTERNAL_PHY) + phy_start(bp->phydev); + netif_start_queue(dev); out: return err; @@ -1646,6 +1650,9 @@ static int b44_close(struct net_device *dev) netif_stop_queue(dev); + if (bp->flags & B44_FLAG_EXTERNAL_PHY) + phy_stop(bp->phydev); + napi_disable(&bp->napi); del_timer_sync(&bp->timer); -- cgit v1.2.3 From 1d3f41ea0e95bed0502a7ac3f42fdc23ca6b7b82 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 2 Mar 2014 17:29:34 +0100 Subject: b44: always set duplex mode why phy changes Without this patch b44_check_phy() was called when the phy called the adjust callback. This method only change the mac duplex mode when the carrier was off. When the phy changed the duplex mode after the carrier was on the mac was not changed. This happened when an external phy was used. Signed-off-by: Hauke Mehrtens Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/b44.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index e8046e1ebd1c..8a7bf7dad898 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -2229,7 +2229,12 @@ static void b44_adjust_link(struct net_device *dev) } if (status_changed) { - b44_check_phy(bp); + u32 val = br32(bp, B44_TX_CTRL); + if (bp->flags & B44_FLAG_FULL_DUPLEX) + val |= TX_CTRL_DUPLEX; + else + val &= ~TX_CTRL_DUPLEX; + bw32(bp, B44_TX_CTRL, val); phy_print_status(phydev); } } -- cgit v1.2.3 From 635d61a3735e05c8da72740006670f819e5b6a5f Mon Sep 17 00:00:00 2001 From: Gerry Demaret Date: Fri, 28 Feb 2014 18:50:46 +0100 Subject: USB AX88179/178A: Support D-Link DUB-1312 Add the USB device ID for the D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter to the AX88179/178A driver. Signed-off-by: Gerry Demaret Signed-off-by: David S. Miller --- drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 460e82392b08..d2e6fdb25e28 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1395,6 +1395,19 @@ static const struct driver_info ax88178a_info = { .tx_fixup = ax88179_tx_fixup, }; +static const struct driver_info dlink_dub1312_info = { + .description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter", + .bind = ax88179_bind, + .unbind = ax88179_unbind, + .status = ax88179_status, + .link_reset = ax88179_link_reset, + .reset = ax88179_reset, + .stop = ax88179_stop, + .flags = FLAG_ETHER | FLAG_FRAMING_AX, + .rx_fixup = ax88179_rx_fixup, + .tx_fixup = ax88179_tx_fixup, +}; + static const struct driver_info sitecom_info = { .description = "Sitecom USB 3.0 to Gigabit Adapter", .bind = ax88179_bind, @@ -1443,6 +1456,10 @@ static const struct usb_device_id products[] = { /* ASIX AX88178A 10/100/1000 */ USB_DEVICE(0x0b95, 0x178a), .driver_info = (unsigned long)&ax88178a_info, +}, { + /* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */ + USB_DEVICE(0x2001, 0x4a00), + .driver_info = (unsigned long)&dlink_dub1312_info, }, { /* Sitecom USB 3.0 to Gigabit Adapter */ USB_DEVICE(0x0df6, 0x0072), -- cgit v1.2.3 From 5be93bdda64e85450598c6e97f79fb8f6acf30e0 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 19 Feb 2014 12:00:51 +0100 Subject: can: flexcan: fix shutdown: first disable chip, then all interrupts When shutting down the CAN interface (ifconfig canX down) during high CAN bus loads, the CAN core might hang and freeze the whole CPU. This patch fixes the shutdown sequence by first disabling the CAN core then disabling all interrupts. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 320bef2dba42..dcd69c9374ae 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -827,14 +827,16 @@ static void flexcan_chip_stop(struct net_device *dev) struct flexcan_regs __iomem *regs = priv->base; u32 reg; - /* Disable all interrupts */ - flexcan_write(0, ®s->imask1); - /* Disable + halt module */ reg = flexcan_read(®s->mcr); reg |= FLEXCAN_MCR_MDIS | FLEXCAN_MCR_HALT; flexcan_write(reg, ®s->mcr); + /* Disable all interrupts */ + flexcan_write(0, ®s->imask1); + flexcan_write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL, + ®s->ctrl); + if (priv->reg_xceiver) regulator_disable(priv->reg_xceiver); priv->can.state = CAN_STATE_STOPPED; -- cgit v1.2.3 From 7e9e148af01ef388efb6e2490805970be4622792 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 28 Feb 2014 14:52:01 +0100 Subject: can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed, this patch adds the missing cleanup. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index dcd69c9374ae..30af702a07ad 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -868,7 +868,7 @@ static int flexcan_open(struct net_device *dev) /* start chip and queuing */ err = flexcan_chip_start(dev); if (err) - goto out_close; + goto out_free_irq; can_led_event(dev, CAN_LED_EVENT_OPEN); @@ -877,6 +877,8 @@ static int flexcan_open(struct net_device *dev) return 0; + out_free_irq: + free_irq(dev->irq, dev); out_close: close_candev(dev); out_disable_per: -- cgit v1.2.3 From 9b00b300e7bce032c467c36ca47fe2a776887fc2 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 28 Feb 2014 15:30:18 +0100 Subject: can: flexcan: fix transition from and to low power mode in chip_{en,dis}able In flexcan_chip_enable() and flexcan_chip_disable() fixed delays are used. Experiments have shown that the transition from and to low power mode may take several microseconds. This patch adds a while loop which polls the Low Power Mode ACK bit (LPM_ACK) that indicates a successfull mode change. If the function runs into a timeout a error value is returned. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 50 +++++++++++++++++++++++++++++++++++------------ 1 file changed, 38 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 30af702a07ad..5af60ab23e6f 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -144,6 +144,8 @@ #define FLEXCAN_MB_CODE_MASK (0xf0ffffff) +#define FLEXCAN_TIMEOUT_US (50) + /* * FLEXCAN hardware feature flags * @@ -269,26 +271,42 @@ static inline int flexcan_has_and_handle_berr(const struct flexcan_priv *priv, (reg_esr & FLEXCAN_ESR_ERR_BUS); } -static inline void flexcan_chip_enable(struct flexcan_priv *priv) +static int flexcan_chip_enable(struct flexcan_priv *priv) { struct flexcan_regs __iomem *regs = priv->base; + unsigned int timeout = FLEXCAN_TIMEOUT_US / 10; u32 reg; reg = flexcan_read(®s->mcr); reg &= ~FLEXCAN_MCR_MDIS; flexcan_write(reg, ®s->mcr); - udelay(10); + while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) + usleep_range(10, 20); + + if (flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK) + return -ETIMEDOUT; + + return 0; } -static inline void flexcan_chip_disable(struct flexcan_priv *priv) +static int flexcan_chip_disable(struct flexcan_priv *priv) { struct flexcan_regs __iomem *regs = priv->base; + unsigned int timeout = FLEXCAN_TIMEOUT_US / 10; u32 reg; reg = flexcan_read(®s->mcr); reg |= FLEXCAN_MCR_MDIS; flexcan_write(reg, ®s->mcr); + + while (timeout-- && !(flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) + usleep_range(10, 20); + + if (!(flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) + return -ETIMEDOUT; + + return 0; } static int flexcan_get_berr_counter(const struct net_device *dev, @@ -709,7 +727,9 @@ static int flexcan_chip_start(struct net_device *dev) u32 reg_mcr, reg_ctrl; /* enable module */ - flexcan_chip_enable(priv); + err = flexcan_chip_enable(priv); + if (err) + return err; /* soft reset */ flexcan_write(FLEXCAN_MCR_SOFTRST, ®s->mcr); @@ -949,12 +969,16 @@ static int register_flexcandev(struct net_device *dev) goto out_disable_ipg; /* select "bus clock", chip must be disabled */ - flexcan_chip_disable(priv); + err = flexcan_chip_disable(priv); + if (err) + goto out_disable_per; reg = flexcan_read(®s->ctrl); reg |= FLEXCAN_CTRL_CLK_SRC; flexcan_write(reg, ®s->ctrl); - flexcan_chip_enable(priv); + err = flexcan_chip_enable(priv); + if (err) + goto out_chip_disable; /* set freeze, halt and activate FIFO, restrict register access */ reg = flexcan_read(®s->mcr); @@ -971,14 +995,15 @@ static int register_flexcandev(struct net_device *dev) if (!(reg & FLEXCAN_MCR_FEN)) { netdev_err(dev, "Could not enable RX FIFO, unsupported core\n"); err = -ENODEV; - goto out_disable_per; + goto out_chip_disable; } err = register_candev(dev); - out_disable_per: /* disable core and turn off clocks */ + out_chip_disable: flexcan_chip_disable(priv); + out_disable_per: clk_disable_unprepare(priv->clk_per); out_disable_ipg: clk_disable_unprepare(priv->clk_ipg); @@ -1121,8 +1146,11 @@ static int flexcan_suspend(struct device *device) { struct net_device *dev = dev_get_drvdata(device); struct flexcan_priv *priv = netdev_priv(dev); + int err; - flexcan_chip_disable(priv); + err = flexcan_chip_disable(priv); + if (err) + return err; if (netif_running(dev)) { netif_stop_queue(dev); @@ -1143,9 +1171,7 @@ static int flexcan_resume(struct device *device) netif_device_attach(dev); netif_start_queue(dev); } - flexcan_chip_enable(priv); - - return 0; + return flexcan_chip_enable(priv); } #endif /* CONFIG_PM_SLEEP */ -- cgit v1.2.3 From f003698e23f6f56a791774f14d0ac35d04872490 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 28 Feb 2014 17:18:27 +0100 Subject: can: flexcan: factor out transceiver {en,dis}able into seperate functions This patch moves the transceiver enable and disable into seperate functions, where the NULL pointer check is hidden. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 5af60ab23e6f..6b0fecd0a6ad 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -264,6 +264,22 @@ static inline void flexcan_write(u32 val, void __iomem *addr) } #endif +static inline int flexcan_transceiver_enable(const struct flexcan_priv *priv) +{ + if (!priv->reg_xceiver) + return 0; + + return regulator_enable(priv->reg_xceiver); +} + +static inline int flexcan_transceiver_disable(const struct flexcan_priv *priv) +{ + if (!priv->reg_xceiver) + return 0; + + return regulator_disable(priv->reg_xceiver); +} + static inline int flexcan_has_and_handle_berr(const struct flexcan_priv *priv, u32 reg_esr) { @@ -808,11 +824,9 @@ static int flexcan_chip_start(struct net_device *dev) if (priv->devtype_data->features & FLEXCAN_HAS_V10_FEATURES) flexcan_write(0x0, ®s->rxfgmask); - if (priv->reg_xceiver) { - err = regulator_enable(priv->reg_xceiver); - if (err) - goto out; - } + err = flexcan_transceiver_enable(priv); + if (err) + goto out; /* synchronize with the can bus */ reg_mcr = flexcan_read(®s->mcr); @@ -857,8 +871,7 @@ static void flexcan_chip_stop(struct net_device *dev) flexcan_write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL, ®s->ctrl); - if (priv->reg_xceiver) - regulator_disable(priv->reg_xceiver); + flexcan_transceiver_disable(priv); priv->can.state = CAN_STATE_STOPPED; return; -- cgit v1.2.3 From b1aa1c7a2165b44ecce66286a3095cc6c7667d1c Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 28 Feb 2014 17:08:21 +0100 Subject: can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze This patch factors out freeze and unfreeze of the CAN core into seperate functions. Experiments have shown that the transition from and to freeze mode may take several microseconds, especially the time entering the freeze mode depends on the current bitrate. This patch adds a while loop which polls the Freeze Mode ACK bit (FRZ_ACK) that indicates a successfull mode change. If the function runs into a timeout a error value is returned. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 60 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 49 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 6b0fecd0a6ad..330b5b957a39 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -325,6 +325,44 @@ static int flexcan_chip_disable(struct flexcan_priv *priv) return 0; } +static int flexcan_chip_freeze(struct flexcan_priv *priv) +{ + struct flexcan_regs __iomem *regs = priv->base; + unsigned int timeout = 1000 * 1000 * 10 / priv->can.bittiming.bitrate; + u32 reg; + + reg = flexcan_read(®s->mcr); + reg |= FLEXCAN_MCR_HALT; + flexcan_write(reg, ®s->mcr); + + while (timeout-- && !(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) + usleep_range(100, 200); + + if (!(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) + return -ETIMEDOUT; + + return 0; +} + +static int flexcan_chip_unfreeze(struct flexcan_priv *priv) +{ + struct flexcan_regs __iomem *regs = priv->base; + unsigned int timeout = FLEXCAN_TIMEOUT_US / 10; + u32 reg; + + reg = flexcan_read(®s->mcr); + reg &= ~FLEXCAN_MCR_HALT; + flexcan_write(reg, ®s->mcr); + + while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) + usleep_range(10, 20); + + if (flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK) + return -ETIMEDOUT; + + return 0; +} + static int flexcan_get_berr_counter(const struct net_device *dev, struct can_berr_counter *bec) { @@ -756,7 +794,7 @@ static int flexcan_chip_start(struct net_device *dev) netdev_err(dev, "Failed to softreset can module (mcr=0x%08x)\n", reg_mcr); err = -ENODEV; - goto out; + goto out_chip_disable; } flexcan_set_bittiming(dev); @@ -826,12 +864,12 @@ static int flexcan_chip_start(struct net_device *dev) err = flexcan_transceiver_enable(priv); if (err) - goto out; + goto out_chip_disable; /* synchronize with the can bus */ - reg_mcr = flexcan_read(®s->mcr); - reg_mcr &= ~FLEXCAN_MCR_HALT; - flexcan_write(reg_mcr, ®s->mcr); + err = flexcan_chip_unfreeze(priv); + if (err) + goto out_transceiver_disable; priv->can.state = CAN_STATE_ERROR_ACTIVE; @@ -844,7 +882,9 @@ static int flexcan_chip_start(struct net_device *dev) return 0; - out: + out_transceiver_disable: + flexcan_transceiver_disable(priv); + out_chip_disable: flexcan_chip_disable(priv); return err; } @@ -859,12 +899,10 @@ static void flexcan_chip_stop(struct net_device *dev) { struct flexcan_priv *priv = netdev_priv(dev); struct flexcan_regs __iomem *regs = priv->base; - u32 reg; - /* Disable + halt module */ - reg = flexcan_read(®s->mcr); - reg |= FLEXCAN_MCR_MDIS | FLEXCAN_MCR_HALT; - flexcan_write(reg, ®s->mcr); + /* freeze + disable module */ + flexcan_chip_freeze(priv); + flexcan_chip_disable(priv); /* Disable all interrupts */ flexcan_write(0, ®s->imask1); -- cgit v1.2.3 From d96e43e8fce28cf97df576a07af9d65657a41a6f Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 28 Feb 2014 20:48:36 +0100 Subject: can: flexcan: flexcan_remove(): add missing netif_napi_del() This patch adds the missing netif_napi_del() to the flexcan_remove() function. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 330b5b957a39..dff4fa472c3a 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1184,9 +1184,10 @@ static int flexcan_probe(struct platform_device *pdev) static int flexcan_remove(struct platform_device *pdev) { struct net_device *dev = platform_get_drvdata(pdev); + struct flexcan_priv *priv = netdev_priv(dev); unregister_flexcandev(dev); - + netif_napi_del(&priv->napi); free_candev(dev); return 0; -- cgit v1.2.3 From 4b5b82274a17f0ebbf02378df2ba7f36a3f5af19 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 28 Feb 2014 15:16:59 +0100 Subject: can: flexcan: factor out soft reset into seperate funtion This patch moves the soft reset into a seperate function. Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index dff4fa472c3a..61376abdab39 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -363,6 +363,21 @@ static int flexcan_chip_unfreeze(struct flexcan_priv *priv) return 0; } +static int flexcan_chip_softreset(struct flexcan_priv *priv) +{ + struct flexcan_regs __iomem *regs = priv->base; + unsigned int timeout = FLEXCAN_TIMEOUT_US / 10; + + flexcan_write(FLEXCAN_MCR_SOFTRST, ®s->mcr); + while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_SOFTRST)) + usleep_range(10, 20); + + if (flexcan_read(®s->mcr) & FLEXCAN_MCR_SOFTRST) + return -ETIMEDOUT; + + return 0; +} + static int flexcan_get_berr_counter(const struct net_device *dev, struct can_berr_counter *bec) { @@ -786,16 +801,9 @@ static int flexcan_chip_start(struct net_device *dev) return err; /* soft reset */ - flexcan_write(FLEXCAN_MCR_SOFTRST, ®s->mcr); - udelay(10); - - reg_mcr = flexcan_read(®s->mcr); - if (reg_mcr & FLEXCAN_MCR_SOFTRST) { - netdev_err(dev, "Failed to softreset can module (mcr=0x%08x)\n", - reg_mcr); - err = -ENODEV; + err = flexcan_chip_softreset(priv); + if (err) goto out_chip_disable; - } flexcan_set_bittiming(dev); -- cgit v1.2.3 From e842b068bf9a9eb7b38e0e1875357440a1fd2169 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 1 Mar 2014 16:54:36 +0300 Subject: qlcnic: dcb: a couple off by one bugs The ->tc_cfg[] array has QLC_DCB_MAX_TC (8) elements so the check is off by one. These functions are always called with valid values though so it doesn't affect how the code works. Signed-off-by: Dan Carpenter Acked-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c index 77f1bce432d2..7d4f54912bad 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c @@ -807,7 +807,7 @@ qlcnic_dcb_get_pg_tc_cfg_tx(struct net_device *netdev, int tc, u8 *prio, !type->tc_param_valid) return; - if (tc < 0 || (tc > QLC_DCB_MAX_TC)) + if (tc < 0 || (tc >= QLC_DCB_MAX_TC)) return; tc_cfg = &type->tc_cfg[tc]; @@ -843,7 +843,7 @@ static void qlcnic_dcb_get_pg_bwg_cfg_tx(struct net_device *netdev, int pgid, !type->tc_param_valid) return; - if (pgid < 0 || pgid > QLC_DCB_MAX_PG) + if (pgid < 0 || pgid >= QLC_DCB_MAX_PG) return; pgcfg = &type->pg_cfg[pgid]; -- cgit v1.2.3 From c502224efb2eaec47f16da39235079598a0f3ed2 Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Mon, 3 Mar 2014 14:24:20 +0530 Subject: be2net: Fix to reset transparent vlan tagging For disabling transparent tagging issue SET_HSW_CONFIG with pvid_valid=1 and pvid=0xFFFF and not with the default pvid as this case would fail in Lancer. Hence removing the get_hsw_config call from be_vf_setup() as it's only use of getting default pvid is no longer needed. Also do proper housekeeping only if the FW command succeeds. Signed-off-by: Kalesh AP Signed-off-by: Somnath Kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 4 +++- drivers/net/ethernet/emulex/benet/be_main.c | 28 +++++++++------------------- 2 files changed, 12 insertions(+), 20 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 8d09615da585..05529e273050 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -350,11 +350,13 @@ struct be_drv_stats { u32 roce_drops_crc; }; +/* A vlan-id of 0xFFFF must be used to clear transparent vlan-tagging */ +#define BE_RESET_VLAN_TAG_ID 0xFFFF + struct be_vf_cfg { unsigned char mac_addr[ETH_ALEN]; int if_handle; int pmac_id; - u16 def_vid; u16 vlan_tag; u32 tx_rate; }; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 04ac9c6a0d39..45662af28928 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1287,24 +1287,20 @@ static int be_set_vf_vlan(struct net_device *netdev, if (vlan || qos) { vlan |= qos << VLAN_PRIO_SHIFT; - if (vf_cfg->vlan_tag != vlan) { - /* If this is new value, program it. Else skip. */ - vf_cfg->vlan_tag = vlan; + if (vf_cfg->vlan_tag != vlan) status = be_cmd_set_hsw_config(adapter, vlan, vf + 1, vf_cfg->if_handle, 0); - } } else { /* Reset Transparent Vlan Tagging. */ - vf_cfg->vlan_tag = 0; - vlan = vf_cfg->def_vid; - status = be_cmd_set_hsw_config(adapter, vlan, vf + 1, - vf_cfg->if_handle, 0); + status = be_cmd_set_hsw_config(adapter, BE_RESET_VLAN_TAG_ID, + vf + 1, vf_cfg->if_handle, 0); } - - if (status) + if (!status) + vf_cfg->vlan_tag = vlan; + else dev_info(&adapter->pdev->dev, - "VLAN %d config on VF %d failed\n", vlan, vf); + "VLAN %d config on VF %d failed\n", vlan, vf); return status; } @@ -3013,11 +3009,11 @@ static int be_vf_setup_init(struct be_adapter *adapter) static int be_vf_setup(struct be_adapter *adapter) { + struct device *dev = &adapter->pdev->dev; struct be_vf_cfg *vf_cfg; - u16 def_vlan, lnk_speed; int status, old_vfs, vf; - struct device *dev = &adapter->pdev->dev; u32 privileges; + u16 lnk_speed; old_vfs = pci_num_vf(adapter->pdev); if (old_vfs) { @@ -3084,12 +3080,6 @@ static int be_vf_setup(struct be_adapter *adapter) if (!status) vf_cfg->tx_rate = lnk_speed; - status = be_cmd_get_hsw_config(adapter, &def_vlan, - vf + 1, vf_cfg->if_handle, NULL); - if (status) - goto err; - vf_cfg->def_vid = def_vlan; - if (!old_vfs) be_cmd_enable_vf(adapter, vf + 1); } -- cgit v1.2.3 From 7ad09458a5be9a0990457c1a198e702559ac25ca Mon Sep 17 00:00:00 2001 From: Somnath kotur Date: Mon, 3 Mar 2014 14:24:43 +0530 Subject: be2net: clear promiscuous bits in adapter->flags while disabling promiscuous mode We should clear promiscuous bits in adapter->flags while disabling promiscuous mode. Else we will not put interface back into VLAN promisc mode if the vlans already added exceeds the maximum limit. Signed-off-by: Kalesh AP Signed-off-by: Somnath Kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 45662af28928..9e6d678bca43 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1157,6 +1157,14 @@ ret: return status; } +static void be_clear_promisc(struct be_adapter *adapter) +{ + adapter->promiscuous = false; + adapter->flags &= ~BE_FLAGS_VLAN_PROMISC; + + be_cmd_rx_filter(adapter, IFF_PROMISC, OFF); +} + static void be_set_rx_mode(struct net_device *netdev) { struct be_adapter *adapter = netdev_priv(netdev); @@ -1170,9 +1178,7 @@ static void be_set_rx_mode(struct net_device *netdev) /* BE was previously in promiscuous mode; disable it */ if (adapter->promiscuous) { - adapter->promiscuous = false; - be_cmd_rx_filter(adapter, IFF_PROMISC, OFF); - + be_clear_promisc(adapter); if (adapter->vlans_added) be_vid_config(adapter); } -- cgit v1.2.3 From c91289510602baf9a05b3501d97dc70efa269e01 Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Mon, 3 Mar 2014 14:25:07 +0530 Subject: be2net: Fix skb double free in be_xmit_wrokarounds() failure path skb_padto(), skb_share_check() and __vlan_put_tag() routines free skb when they return an error. This patch fixes be_xmit_workarounds() to not free skb again in such cases. Signed-off-by: Vasundhara Volam Signed-off-by: Sathya Perla Signed-off-by: Somnath Kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 9e6d678bca43..a9da6f94e2fd 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -927,7 +927,7 @@ static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter, */ if (unlikely(!BEx_chip(adapter) && skb->len <= 32)) { if (skb_padto(skb, 36)) - goto tx_drop; + goto err; skb->len = 36; } @@ -959,7 +959,7 @@ static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter, vlan_tx_tag_present(skb)) { skb = be_insert_vlan_in_pkt(adapter, skb, skip_hw_vlan); if (unlikely(!skb)) - goto tx_drop; + goto err; } /* HW may lockup when VLAN HW tagging is requested on @@ -981,12 +981,13 @@ static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter, be_vlan_tag_tx_chk(adapter, skb)) { skb = be_insert_vlan_in_pkt(adapter, skb, skip_hw_vlan); if (unlikely(!skb)) - goto tx_drop; + goto err; } return skb; tx_drop: dev_kfree_skb_any(skb); +err: return NULL; } -- cgit v1.2.3 From ec495fac119f2eaea8b8c6e6db17ba163c7af1f4 Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Mon, 3 Mar 2014 14:25:38 +0530 Subject: be2net: isolate TX workarounds not applicable to Skyhawk-R Some of TX workarounds in be_xmit_workarounds() routine are not applicable (and result in HW errors) to Skyhawk-R chip. Isolate BE3-R/Lancer specific workarounds to a separate routine. Signed-off-by: Vasundhara Volam Signed-off-by: Sathya Perla Signed-off-by: Somnath Kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 39 +++++++++++++++++++---------- 1 file changed, 26 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index a9da6f94e2fd..36c80612e21a 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -913,24 +913,14 @@ static int be_ipv6_tx_stall_chk(struct be_adapter *adapter, return BE3_chip(adapter) && be_ipv6_exthdr_check(skb); } -static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter, - struct sk_buff *skb, - bool *skip_hw_vlan) +static struct sk_buff *be_lancer_xmit_workarounds(struct be_adapter *adapter, + struct sk_buff *skb, + bool *skip_hw_vlan) { struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; unsigned int eth_hdr_len; struct iphdr *ip; - /* Lancer, SH-R ASICs have a bug wherein Packets that are 32 bytes or less - * may cause a transmit stall on that port. So the work-around is to - * pad short packets (<= 32 bytes) to a 36-byte length. - */ - if (unlikely(!BEx_chip(adapter) && skb->len <= 32)) { - if (skb_padto(skb, 36)) - goto err; - skb->len = 36; - } - /* For padded packets, BE HW modifies tot_len field in IP header * incorrecly when VLAN tag is inserted by HW. * For padded packets, Lancer computes incorrect checksum. @@ -991,6 +981,29 @@ err: return NULL; } +static struct sk_buff *be_xmit_workarounds(struct be_adapter *adapter, + struct sk_buff *skb, + bool *skip_hw_vlan) +{ + /* Lancer, SH-R ASICs have a bug wherein Packets that are 32 bytes or + * less may cause a transmit stall on that port. So the work-around is + * to pad short packets (<= 32 bytes) to a 36-byte length. + */ + if (unlikely(!BEx_chip(adapter) && skb->len <= 32)) { + if (skb_padto(skb, 36)) + return NULL; + skb->len = 36; + } + + if (BEx_chip(adapter) || lancer_chip(adapter)) { + skb = be_lancer_xmit_workarounds(adapter, skb, skip_hw_vlan); + if (!skb) + return NULL; + } + + return skb; +} + static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev) { struct be_adapter *adapter = netdev_priv(netdev); -- cgit v1.2.3 From 3995d265b3640fb7dc843a3c5f62ced4f121fb89 Mon Sep 17 00:00:00 2001 From: Schuyler Patton Date: Mon, 3 Mar 2014 16:19:06 +0530 Subject: net: cpsw: fix cpdma rx descriptor leak on down interface This patch fixes a CPDMA RX Descriptor leak that occurs after taking the interface down when the CPSW is in Dual MAC mode. Previously the CPSW_ALE port was left open up which causes packets to be received and processed by the RX interrupt handler and were passed to the non active network interface where they were ignored. The fix is for the slave_stop function of the selected interface to disable the respective CPSW_ALE Port from forwarding packets. This blocks traffic from being received on the inactive interface. Signed-off-by: Schuyler Patton Reviewed-by: Felipe Balbi Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 651087b5c8da..ffd4d12acf6d 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1164,11 +1164,17 @@ static void cpsw_init_host_port(struct cpsw_priv *priv) static void cpsw_slave_stop(struct cpsw_slave *slave, struct cpsw_priv *priv) { + u32 slave_port; + + slave_port = cpsw_get_slave_port(priv, slave->slave_num); + if (!slave->phy) return; phy_stop(slave->phy); phy_disconnect(slave->phy); slave->phy = NULL; + cpsw_ale_control_set(priv->ale, slave_port, + ALE_PORT_STATE, ALE_PORT_STATE_DISABLE); } static int cpsw_ndo_open(struct net_device *ndev) -- cgit v1.2.3 From 8b4703e9bd1172a5f8244276ebb94302e6153e26 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Mon, 3 Mar 2014 15:33:53 -0500 Subject: macvlan: Add support for 'always_on' offload features Macvlan currently inherits all of its features from the lower device. When lower device disables offload support, this causes macvlan to disable offload support as well. This causes performance regression when using macvlan/macvtap in bridge mode. It can be easily demonstrated by creating 2 namespaces using macvlan in bridge mode and running netperf between them: MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.00 1204.61 To restore the performance, we add software offload features to the list of "always_on" features for macvlan. This way when a namespace or a guest using macvtap initially sends a packet, this packet will not be segmented at macvlan level. It will only be segmented when macvlan sends the packet to the lower device. MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.00 5507.35 Fixes: 6acf54f1cf0a6747bac9fea26f34cfc5a9029523 (macvtap: Add support of packet capture on macvtap device.) Fixes: 797f87f83b60685ff8a13fa0572d2f10393c50d3 (macvlan: fix netdev feature propagation from lower device) CC: Florian Westphal CC: Christian Borntraeger CC: Jason Wang CC: Michael S. Tsirkin Tested-by: Christian Borntraeger Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index a5d21893670d..1831fb7cd017 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -506,6 +506,9 @@ static int macvlan_change_mtu(struct net_device *dev, int new_mtu) static struct lock_class_key macvlan_netdev_xmit_lock_key; static struct lock_class_key macvlan_netdev_addr_lock_key; +#define ALWAYS_ON_FEATURES \ + (NETIF_F_SG | NETIF_F_GEN_CSUM | NETIF_F_GSO_SOFTWARE | NETIF_F_LLTX) + #define MACVLAN_FEATURES \ (NETIF_F_SG | NETIF_F_ALL_CSUM | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | \ NETIF_F_GSO | NETIF_F_TSO | NETIF_F_UFO | NETIF_F_GSO_ROBUST | \ @@ -539,7 +542,7 @@ static int macvlan_init(struct net_device *dev) dev->state = (dev->state & ~MACVLAN_STATE_MASK) | (lowerdev->state & MACVLAN_STATE_MASK); dev->features = lowerdev->features & MACVLAN_FEATURES; - dev->features |= NETIF_F_LLTX; + dev->features |= ALWAYS_ON_FEATURES; dev->gso_max_size = lowerdev->gso_max_size; dev->iflink = lowerdev->ifindex; dev->hard_header_len = lowerdev->hard_header_len; @@ -699,7 +702,7 @@ static netdev_features_t macvlan_fix_features(struct net_device *dev, features = netdev_increment_features(vlan->lowerdev->features, features, mask); - features |= NETIF_F_LLTX; + features |= ALWAYS_ON_FEATURES; return features; } -- cgit v1.2.3