From b1a98b695b4efe10067d0e1cb5b66146a4e517bf Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Thu, 2 Jun 2011 11:02:50 +0800 Subject: PCI: enumerate the PCI device only removed out PCI hieratchy of OS when re-scanning PCI When hot-plugging a root bridge, we always prevent assigning a bus number that already exists. This makes sure we don't step over an existing bus. But sometimes we only remove PCI device in PCI hieratchy of OS, i,e. echo 1 > /sys/bus/pci/devices/.../remove but actually don't hotplug this device out the platform, so in this case we still should re-scan this bus to enumerate this device when re-scanning PCI again. Signed-off-by: Tiejun Chen Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index bafb3c3d4a89..f03ed96533d5 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -724,12 +724,14 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, pci_write_config_word(dev, PCI_STATUS, 0xffff); /* Prevent assigning a bus number that already exists. - * This can happen when a bridge is hot-plugged */ - if (pci_find_bus(pci_domain_nr(bus), max+1)) - goto out; - child = pci_add_new_bus(bus, dev, ++max); - if (!child) - goto out; + * This can happen when a bridge is hot-plugged, so in + * this case we only re-scan this bus. */ + child = pci_find_bus(pci_domain_nr(bus), max+1); + if (!child) { + child = pci_add_new_bus(bus, dev, ++max); + if (!child) + goto out; + } buses = (buses & 0xff000000) | ((unsigned int)(child->primary) << 0) | ((unsigned int)(child->secondary) << 8) -- cgit v1.2.3