From cc31cdbef9b7166fe42e08267349cfbaa32696b6 Mon Sep 17 00:00:00 2001 From: Can Guo Date: Thu, 20 Sep 2018 21:27:56 -0700 Subject: phy: Add QMP phy based UFS phy support for sdm845 Add UFS PHY support to make SDM845 UFS work with common PHY framework. Signed-off-by: Can Guo Reviewed-by: Evan Green Reviewed-by: Vivek Gautam Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/qualcomm/phy-qcom-qmp.c | 172 +++++++++++++++++++++++++++++++++++- drivers/phy/qualcomm/phy-qcom-qmp.h | 15 ++++ 2 files changed, 186 insertions(+), 1 deletion(-) (limited to 'drivers/phy/qualcomm') diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 1603d9c615c5..a83332411026 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -156,6 +156,11 @@ static const unsigned int qmp_v3_usb3phy_regs_layout[] = { [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170, }; +static const unsigned int sdm845_ufsphy_regs_layout[] = { + [QPHY_START_CTRL] = 0x00, + [QPHY_PCS_READY_STATUS] = 0x160, +}; + static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c), QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10), @@ -601,6 +606,83 @@ static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60), }; +static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f), + + /* Rate B */ + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44), +}; + +static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07), +}; + +static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59), +}; + +static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL2, 0x6e), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x0a), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_SMALL_AMP_DRV_LVL, 0x02), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SYM_RESYNC_CTRL, 0x03), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_MID_TERM_CTRL1, 0x43), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_CTRL1, 0x0f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_MIN_HIBERN8_TIME, 0x9a), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02), +}; /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { @@ -654,6 +736,9 @@ struct qmp_phy_cfg { /* Register offset of secondary tx/rx lanes for USB DP combo PHY */ unsigned int tx_b_lane_offset; unsigned int rx_b_lane_offset; + + /* true, if PCS block has no separate SW_RESET register */ + bool no_pcs_sw_reset; }; /** @@ -750,6 +835,10 @@ static const char * const qmp_v3_phy_clk_l[] = { "aux", "cfg_ahb", "ref", "com_aux", }; +static const char * const sdm845_ufs_phy_clk_l[] = { + "ref", "ref_aux", +}; + /* list of resets */ static const char * const msm8996_pciephy_reset_l[] = { "phy", "common", "cfg", @@ -919,6 +1008,35 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, }; +static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { + .type = PHY_TYPE_UFS, + .nlanes = 2, + + .serdes_tbl = sdm845_ufsphy_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl), + .tx_tbl = sdm845_ufsphy_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl), + .rx_tbl = sdm845_ufsphy_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl), + .pcs_tbl = sdm845_ufsphy_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl), + .clk_list = sdm845_ufs_phy_clk_l, + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = sdm845_ufsphy_regs_layout, + + .start_ctrl = SERDES_START, + .pwrdn_ctrl = SW_PWRDN, + .mask_pcs_ready = PCS_READY, + + .is_dual_lane_phy = true, + .tx_b_lane_offset = 0x400, + .rx_b_lane_offset = 0x400, + + .no_pcs_sw_reset = true, +}; + static void qcom_qmp_phy_configure(void __iomem *base, const unsigned int *regs, const struct qmp_phy_init_tbl tbl[], @@ -1130,6 +1248,14 @@ static int qcom_qmp_phy_init(struct phy *phy) qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); + /* + * UFS PHY requires the deassert of software reset before serdes start. + * For UFS PHYs that do not have software reset control bits, defer + * starting serdes until the power on callback. + */ + if ((cfg->type == PHY_TYPE_UFS) && cfg->no_pcs_sw_reset) + goto out; + /* * Pull out PHY from POWER DOWN state. * This is active low enable signal to power-down PHY. @@ -1159,6 +1285,7 @@ static int qcom_qmp_phy_init(struct phy *phy) } qmp->phy_initialized = true; +out: return ret; err_pcs_ready: @@ -1181,7 +1308,8 @@ static int qcom_qmp_phy_exit(struct phy *phy) clk_disable_unprepare(qphy->pipe_clk); /* PHY reset */ - qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + if (!cfg->no_pcs_sw_reset) + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); /* stop SerDes and Phy-Coding-Sublayer */ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); @@ -1199,6 +1327,44 @@ static int qcom_qmp_phy_exit(struct phy *phy) return 0; } +static int qcom_qmp_phy_poweron(struct phy *phy) +{ + struct qmp_phy *qphy = phy_get_drvdata(phy); + struct qcom_qmp *qmp = qphy->qmp; + const struct qmp_phy_cfg *cfg = qmp->cfg; + void __iomem *pcs = qphy->pcs; + void __iomem *status; + unsigned int mask, val; + int ret = 0; + + if (cfg->type != PHY_TYPE_UFS) + return 0; + + /* + * For UFS PHY that has not software reset control, serdes start + * should only happen when UFS driver explicitly calls phy_power_on + * after it deasserts software reset. + */ + if (cfg->no_pcs_sw_reset && !qmp->phy_initialized && + (qmp->init_count != 0)) { + /* start SerDes and Phy-Coding-Sublayer */ + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); + + status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; + mask = cfg->mask_pcs_ready; + + ret = readl_poll_timeout(status, val, !(val & mask), 1, + PHY_INIT_COMPLETE_TIMEOUT); + if (ret) { + dev_err(qmp->dev, "phy initialization timed-out\n"); + return ret; + } + qmp->phy_initialized = true; + } + + return ret; +} + static int qcom_qmp_phy_set_mode(struct phy *phy, enum phy_mode mode) { struct qmp_phy *qphy = phy_get_drvdata(phy); @@ -1428,6 +1594,7 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np) static const struct phy_ops qcom_qmp_phy_gen_ops = { .init = qcom_qmp_phy_init, .exit = qcom_qmp_phy_exit, + .power_on = qcom_qmp_phy_poweron, .set_mode = qcom_qmp_phy_set_mode, .owner = THIS_MODULE, }; @@ -1530,6 +1697,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { }, { .compatible = "qcom,sdm845-qmp-usb3-uni-phy", .data = &qmp_v3_usb3_uniphy_cfg, + }, { + .compatible = "qcom,sdm845-qmp-ufs-phy", + .data = &sdm845_ufsphy_cfg, }, { }, }; diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 5d78d43ba9fc..d201cc307151 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -184,6 +184,8 @@ #define QSERDES_V3_COM_VCO_TUNE2_MODE0 0x0f8 #define QSERDES_V3_COM_VCO_TUNE1_MODE1 0x0fc #define QSERDES_V3_COM_VCO_TUNE2_MODE1 0x100 +#define QSERDES_V3_COM_VCO_TUNE_INITVAL1 0x104 +#define QSERDES_V3_COM_VCO_TUNE_INITVAL2 0x108 #define QSERDES_V3_COM_VCO_TUNE_TIMER1 0x11c #define QSERDES_V3_COM_VCO_TUNE_TIMER2 0x120 #define QSERDES_V3_COM_CLK_SELECT 0x138 @@ -211,8 +213,13 @@ /* Only for QMP V3 PHY - RX registers */ #define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c #define QSERDES_V3_RX_UCDR_SO_GAIN 0x014 +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF 0x024 +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER 0x028 +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN 0x02c #define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030 #define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034 +#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c +#define QSERDES_V3_RX_UCDR_PI_CONTROLS 0x044 #define QSERDES_V3_RX_RX_TERM_BW 0x07c #define QSERDES_V3_RX_VGA_CAL_CNTRL1 0x0bc #define QSERDES_V3_RX_VGA_CAL_CNTRL2 0x0c0 @@ -239,6 +246,8 @@ #define QPHY_V3_PCS_TXMGN_V3 0x018 #define QPHY_V3_PCS_TXMGN_V4 0x01c #define QPHY_V3_PCS_TXMGN_LS 0x020 +#define QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL 0x02c +#define QPHY_V3_PCS_TX_SMALL_AMP_DRV_LVL 0x034 #define QPHY_V3_PCS_TXDEEMPH_M6DB_V0 0x024 #define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0 0x028 #define QPHY_V3_PCS_TXDEEMPH_M6DB_V1 0x02c @@ -275,6 +284,12 @@ #define QPHY_V3_PCS_FLL_CNT_VAL_L 0x0cc #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL 0x0d0 #define QPHY_V3_PCS_FLL_MAN_CODE 0x0d4 +#define QPHY_V3_PCS_RX_SYM_RESYNC_CTRL 0x134 +#define QPHY_V3_PCS_RX_MIN_HIBERN8_TIME 0x138 +#define QPHY_V3_PCS_RX_SIGDET_CTRL1 0x13c +#define QPHY_V3_PCS_RX_SIGDET_CTRL2 0x140 +#define QPHY_V3_PCS_TX_MID_TERM_CTRL1 0x1bc +#define QPHY_V3_PCS_MULTI_LANE_CTRL1 0x1c4 #define QPHY_V3_PCS_RX_SIGDET_LVL 0x1d8 #define QPHY_V3_PCS_REFGEN_REQ_CONFIG1 0x20c #define QPHY_V3_PCS_REFGEN_REQ_CONFIG2 0x210 -- cgit v1.2.3