From 6db78b201b3fa3611b9557f0d677cd4560358f9d Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 12 Apr 2017 18:29:23 +0200 Subject: pwm: tegra: Avoid potential overflow for short periods For very short periods, the result of the division might overflow the unsigned long hz variable (on 32-bit architectures). Avoid that by making it an unsigned long long. While at it, also remove an unneeded local variable whose only purpose is to store a temporary computation. Acked-by: Laxman Dewangan Signed-off-by: Thierry Reding --- drivers/pwm/pwm-tegra.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/pwm') diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c index 9c7f180b9f3a..c040f87ee144 100644 --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -75,9 +75,8 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, int duty_ns, int period_ns) { struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip); - unsigned long long c = duty_ns; - unsigned long rate, hz; - unsigned long long ns100 = NSEC_PER_SEC; + unsigned long long c = duty_ns, hz; + unsigned long rate; u32 val = 0; int err; @@ -98,9 +97,8 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, rate = clk_get_rate(pc->clk) >> PWM_DUTY_WIDTH; /* Consider precision in PWM_SCALE_WIDTH rate calculation */ - ns100 *= 100; - hz = DIV_ROUND_CLOSEST_ULL(ns100, period_ns); - rate = DIV_ROUND_CLOSEST(rate * 100, hz); + hz = DIV_ROUND_CLOSEST_ULL(100ULL * NSEC_PER_SEC, period_ns); + rate = DIV_ROUND_CLOSEST_ULL(100ULL * rate, hz); /* * Since the actual PWM divider is the register's frequency divider -- cgit v1.2.3