From 5ecb065165b90a5745f3a6c3a8a847b530e3afbc Mon Sep 17 00:00:00 2001 From: Sibi Sankar Date: Wed, 27 Jun 2018 19:54:43 +0530 Subject: reset: qcom: AOSS (always on subsystem) reset controller Add reset controller driver for Qualcomm SDM845 SoC to control reset signals provided by AOSS for Modem, Venus ADSP, GPU, Camera, Wireless, Display subsystem Reviewed-by: Bjorn Andersson Signed-off-by: Sibi Sankar Signed-off-by: Philipp Zabel --- drivers/reset/Kconfig | 9 +++ drivers/reset/Makefile | 1 + drivers/reset/reset-qcom-aoss.c | 133 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 143 insertions(+) create mode 100644 drivers/reset/reset-qcom-aoss.c (limited to 'drivers/reset') diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index c0b292be1b72..756ad2b27d0f 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -82,6 +82,15 @@ config RESET_PISTACHIO help This enables the reset driver for ImgTec Pistachio SoCs. +config RESET_QCOM_AOSS + bool "Qcom AOSS Reset Driver" + depends on ARCH_QCOM || COMPILE_TEST + help + This enables the AOSS (always on subsystem) reset driver + for Qualcomm SDM845 SoCs. Say Y if you want to control + reset signals provided by AOSS for Modem, Venus, ADSP, + GPU, Camera, Wireless, Display subsystem. Otherwise, say N. + config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index c1261dcfe9ad..6881e4d287f0 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o obj-$(CONFIG_RESET_MESON) += reset-meson.o obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o +obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o diff --git a/drivers/reset/reset-qcom-aoss.c b/drivers/reset/reset-qcom-aoss.c new file mode 100644 index 000000000000..36db96750450 --- /dev/null +++ b/drivers/reset/reset-qcom-aoss.c @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include + +struct qcom_aoss_reset_map { + unsigned int reg; +}; + +struct qcom_aoss_desc { + const struct qcom_aoss_reset_map *resets; + size_t num_resets; +}; + +struct qcom_aoss_reset_data { + struct reset_controller_dev rcdev; + void __iomem *base; + const struct qcom_aoss_desc *desc; +}; + +static const struct qcom_aoss_reset_map sdm845_aoss_resets[] = { + [AOSS_CC_MSS_RESTART] = {0x10000}, + [AOSS_CC_CAMSS_RESTART] = {0x11000}, + [AOSS_CC_VENUS_RESTART] = {0x12000}, + [AOSS_CC_GPU_RESTART] = {0x13000}, + [AOSS_CC_DISPSS_RESTART] = {0x14000}, + [AOSS_CC_WCSS_RESTART] = {0x20000}, + [AOSS_CC_LPASS_RESTART] = {0x30000}, +}; + +static const struct qcom_aoss_desc sdm845_aoss_desc = { + .resets = sdm845_aoss_resets, + .num_resets = ARRAY_SIZE(sdm845_aoss_resets), +}; + +static inline struct qcom_aoss_reset_data *to_qcom_aoss_reset_data( + struct reset_controller_dev *rcdev) +{ + return container_of(rcdev, struct qcom_aoss_reset_data, rcdev); +} + +static int qcom_aoss_control_assert(struct reset_controller_dev *rcdev, + unsigned long idx) +{ + struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev); + const struct qcom_aoss_reset_map *map = &data->desc->resets[idx]; + + writel(1, data->base + map->reg); + /* Wait 6 32kHz sleep cycles for reset */ + usleep_range(200, 300); + return 0; +} + +static int qcom_aoss_control_deassert(struct reset_controller_dev *rcdev, + unsigned long idx) +{ + struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev); + const struct qcom_aoss_reset_map *map = &data->desc->resets[idx]; + + writel(0, data->base + map->reg); + /* Wait 6 32kHz sleep cycles for reset */ + usleep_range(200, 300); + return 0; +} + +static int qcom_aoss_control_reset(struct reset_controller_dev *rcdev, + unsigned long idx) +{ + qcom_aoss_control_assert(rcdev, idx); + + return qcom_aoss_control_deassert(rcdev, idx); +} + +static const struct reset_control_ops qcom_aoss_reset_ops = { + .reset = qcom_aoss_control_reset, + .assert = qcom_aoss_control_assert, + .deassert = qcom_aoss_control_deassert, +}; + +static int qcom_aoss_reset_probe(struct platform_device *pdev) +{ + struct qcom_aoss_reset_data *data; + struct device *dev = &pdev->dev; + const struct qcom_aoss_desc *desc; + struct resource *res; + + desc = of_device_get_match_data(dev); + if (!desc) + return -EINVAL; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->desc = desc; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->base = devm_ioremap_resource(dev, res); + if (IS_ERR(data->base)) + return PTR_ERR(data->base); + + data->rcdev.owner = THIS_MODULE; + data->rcdev.ops = &qcom_aoss_reset_ops; + data->rcdev.nr_resets = desc->num_resets; + data->rcdev.of_node = dev->of_node; + + return devm_reset_controller_register(dev, &data->rcdev); +} + +static const struct of_device_id qcom_aoss_reset_of_match[] = { + { .compatible = "qcom,sdm845-aoss-cc", .data = &sdm845_aoss_desc }, + {} +}; + +static struct platform_driver qcom_aoss_reset_driver = { + .probe = qcom_aoss_reset_probe, + .driver = { + .name = "qcom_aoss_reset", + .of_match_table = qcom_aoss_reset_of_match, + }, +}; + +builtin_platform_driver(qcom_aoss_reset_driver); + +MODULE_DESCRIPTION("Qualcomm AOSS Reset Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 9ad39ab2807756ac9b0a3aca4457031ea814e658 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Wed, 4 Jul 2018 19:13:56 +0900 Subject: reset: simple: export reset_simple_ops to be referred from modules Allow reset_simple_ops to be referred from modules that use reset-simple framework by adding EXPORT_SYMBOL_GPL. Suggested-by: Masahiro Yamada Signed-off-by: Kunihiko Hayashi Signed-off-by: Philipp Zabel --- drivers/reset/reset-simple.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/reset') diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c index f7ce8910a392..a91107fc9e27 100644 --- a/drivers/reset/reset-simple.c +++ b/drivers/reset/reset-simple.c @@ -87,6 +87,7 @@ const struct reset_control_ops reset_simple_ops = { .deassert = reset_simple_deassert, .status = reset_simple_status, }; +EXPORT_SYMBOL_GPL(reset_simple_ops); /** * struct reset_simple_devdata - simple reset controller properties -- cgit v1.2.3 From 499fef09a3237497906084da3eede0185fc9abb8 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 10 Jul 2018 10:14:17 +0900 Subject: reset: uniphier: add USB3 core reset control Add a reset line to enable USB3 core implemented in UniPhier SoCs. This reuses only the reset operations in reset-simple, because the reset-simple doesn't handle any SoC-dependent clocks and resets. This reset line is included in the USB3 glue layer, and it's necessary to enable clocks and deassert resets of the layer before using this reset line. Signed-off-by: Kunihiko Hayashi Signed-off-by: Philipp Zabel --- drivers/reset/Kconfig | 10 +++ drivers/reset/Makefile | 1 + drivers/reset/reset-uniphier-usb3.c | 171 ++++++++++++++++++++++++++++++++++++ 3 files changed, 182 insertions(+) create mode 100644 drivers/reset/reset-uniphier-usb3.c (limited to 'drivers/reset') diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 756ad2b27d0f..a70262cb7e56 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -147,6 +147,16 @@ config RESET_UNIPHIER Say Y if you want to control reset signals provided by System Control block, Media I/O block, Peripheral Block. +config RESET_UNIPHIER_USB3 + tristate "USB3 reset driver for UniPhier SoCs" + depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF + default ARCH_UNIPHIER + select RESET_SIMPLE + help + Support for the USB3 core reset on UniPhier SoCs. + Say Y if you want to control reset signals provided by + USB3 glue layer. + config RESET_ZYNQ bool "ZYNQ Reset Driver" if COMPILE_TEST default ARCH_ZYNQ diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 6881e4d287f0..0676b6b1976f 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -21,5 +21,6 @@ obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o +obj-$(CONFIG_RESET_UNIPHIER_USB3) += reset-uniphier-usb3.o obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o diff --git a/drivers/reset/reset-uniphier-usb3.c b/drivers/reset/reset-uniphier-usb3.c new file mode 100644 index 000000000000..ffa1b19b594d --- /dev/null +++ b/drivers/reset/reset-uniphier-usb3.c @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// reset-uniphier-usb3.c - USB3 reset driver for UniPhier +// Copyright 2018 Socionext Inc. +// Author: Kunihiko Hayashi + +#include +#include +#include +#include +#include + +#include "reset-simple.h" + +#define MAX_CLKS 2 +#define MAX_RSTS 2 + +struct uniphier_usb3_reset_soc_data { + int nclks; + const char * const *clock_names; + int nrsts; + const char * const *reset_names; +}; + +struct uniphier_usb3_reset_priv { + struct clk_bulk_data clk[MAX_CLKS]; + struct reset_control *rst[MAX_RSTS]; + struct reset_simple_data rdata; + const struct uniphier_usb3_reset_soc_data *data; +}; + +static int uniphier_usb3_reset_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct uniphier_usb3_reset_priv *priv; + struct resource *res; + resource_size_t size; + const char *name; + int i, ret, nr; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->data = of_device_get_match_data(dev); + if (WARN_ON(!priv->data || priv->data->nclks > MAX_CLKS || + priv->data->nrsts > MAX_RSTS)) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + size = resource_size(res); + priv->rdata.membase = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->rdata.membase)) + return PTR_ERR(priv->rdata.membase); + + for (i = 0; i < priv->data->nclks; i++) + priv->clk[i].id = priv->data->clock_names[i]; + ret = devm_clk_bulk_get(dev, priv->data->nclks, priv->clk); + if (ret) + return ret; + + for (i = 0; i < priv->data->nrsts; i++) { + name = priv->data->reset_names[i]; + priv->rst[i] = devm_reset_control_get_shared(dev, name); + if (IS_ERR(priv->rst[i])) + return PTR_ERR(priv->rst[i]); + } + + ret = clk_bulk_prepare_enable(priv->data->nclks, priv->clk); + if (ret) + return ret; + + for (nr = 0; nr < priv->data->nrsts; nr++) { + ret = reset_control_deassert(priv->rst[nr]); + if (ret) + goto out_rst_assert; + } + + spin_lock_init(&priv->rdata.lock); + priv->rdata.rcdev.owner = THIS_MODULE; + priv->rdata.rcdev.nr_resets = size * BITS_PER_BYTE; + priv->rdata.rcdev.ops = &reset_simple_ops; + priv->rdata.rcdev.of_node = dev->of_node; + priv->rdata.active_low = true; + + platform_set_drvdata(pdev, priv); + + ret = devm_reset_controller_register(dev, &priv->rdata.rcdev); + if (ret) + goto out_rst_assert; + + return 0; + +out_rst_assert: + while (nr--) + reset_control_assert(priv->rst[nr]); + + clk_bulk_disable_unprepare(priv->data->nclks, priv->clk); + + return ret; +} + +static int uniphier_usb3_reset_remove(struct platform_device *pdev) +{ + struct uniphier_usb3_reset_priv *priv = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < priv->data->nrsts; i++) + reset_control_assert(priv->rst[i]); + + clk_bulk_disable_unprepare(priv->data->nclks, priv->clk); + + return 0; +} + +static const char * const uniphier_pro4_clock_reset_names[] = { + "gio", "link", +}; + +static const struct uniphier_usb3_reset_soc_data uniphier_pro4_data = { + .nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names), + .clock_names = uniphier_pro4_clock_reset_names, + .nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names), + .reset_names = uniphier_pro4_clock_reset_names, +}; + +static const char * const uniphier_pxs2_clock_reset_names[] = { + "link", +}; + +static const struct uniphier_usb3_reset_soc_data uniphier_pxs2_data = { + .nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names), + .clock_names = uniphier_pxs2_clock_reset_names, + .nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names), + .reset_names = uniphier_pxs2_clock_reset_names, +}; + +static const struct of_device_id uniphier_usb3_reset_match[] = { + { + .compatible = "socionext,uniphier-pro4-usb3-reset", + .data = &uniphier_pro4_data, + }, + { + .compatible = "socionext,uniphier-pxs2-usb3-reset", + .data = &uniphier_pxs2_data, + }, + { + .compatible = "socionext,uniphier-ld20-usb3-reset", + .data = &uniphier_pxs2_data, + }, + { + .compatible = "socionext,uniphier-pxs3-usb3-reset", + .data = &uniphier_pxs2_data, + }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, uniphier_usb3_reset_match); + +static struct platform_driver uniphier_usb3_reset_driver = { + .probe = uniphier_usb3_reset_probe, + .remove = uniphier_usb3_reset_remove, + .driver = { + .name = "uniphier-usb3-reset", + .of_match_table = uniphier_usb3_reset_match, + }, +}; +module_platform_driver(uniphier_usb3_reset_driver); + +MODULE_AUTHOR("Kunihiko Hayashi "); +MODULE_DESCRIPTION("UniPhier USB3 Reset Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 6b39fd590aebca1a6a4c827f29f14d2b6df3939d Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Thu, 19 Jul 2018 15:18:53 +0900 Subject: reset: uniphier: add reset control support for SPI Add reset control for SPI controller on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi Acked-by: Masahiro Yamada Signed-off-by: Philipp Zabel --- drivers/reset/reset-uniphier.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/reset') diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c index e9030ff1bf2f..5605745663ae 100644 --- a/drivers/reset/reset-uniphier.c +++ b/drivers/reset/reset-uniphier.c @@ -202,6 +202,12 @@ static const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = { #define UNIPHIER_PERI_RESET_FI2C(id, ch) \ UNIPHIER_RESETX((id), 0x114, 24 + (ch)) +#define UNIPHIER_PERI_RESET_SCSSI(id) \ + UNIPHIER_RESETX((id), 0x110, 17) + +#define UNIPHIER_PERI_RESET_MCSSI(id) \ + UNIPHIER_RESETX((id), 0x114, 14) + static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = { UNIPHIER_PERI_RESET_UART(0, 0), UNIPHIER_PERI_RESET_UART(1, 1), @@ -212,6 +218,7 @@ static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = { UNIPHIER_PERI_RESET_I2C(6, 2), UNIPHIER_PERI_RESET_I2C(7, 3), UNIPHIER_PERI_RESET_I2C(8, 4), + UNIPHIER_PERI_RESET_SCSSI(11), UNIPHIER_RESET_END, }; @@ -227,6 +234,8 @@ static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = { UNIPHIER_PERI_RESET_FI2C(8, 4), UNIPHIER_PERI_RESET_FI2C(9, 5), UNIPHIER_PERI_RESET_FI2C(10, 6), + UNIPHIER_PERI_RESET_SCSSI(11), + UNIPHIER_PERI_RESET_MCSSI(12), UNIPHIER_RESET_END, }; -- cgit v1.2.3