From 7f4c5a26f735dea4bbc0eb8eb9da99cda95a8563 Mon Sep 17 00:00:00 2001 From: James Smart Date: Sat, 12 Feb 2022 08:31:20 -0800 Subject: scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop When connected point to point, the driver does not know the FC4's supported by the other end. In Fabrics, it can query the nameserver. Thus the driver must send PRLIs for the FC4s it supports and enable support based on the acc(ept) or rej(ect) of the respective FC4 PRLI. Currently the driver supports SCSI and NVMe PRLIs. Unfortunately, although the behavior is per standard, many devices have come to expect only SCSI PRLIs. In this particular example, the NVMe PRLI is properly RJT'd but the target decided that it must LOGO after seeing the unexpected NVMe PRLI. The LOGO causes the sequence to restart and login is now in an infinite failure loop. Fix the problem by having the driver, on a pt2pt link, remember NVMe PRLI accept or reject status across logout as long as the link stays "up". When retrying login, if the prior NVMe PRLI was rejected, it will not be sent on the next login. Link: https://lore.kernel.org/r/20220212163120.15385-1-jsmart2021@gmail.com Cc: # v5.4+ Reviewed-by: Ewan D. Milne Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_els.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) (limited to 'drivers/scsi/lpfc/lpfc_els.c') diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index db5ccae1b63d..f936833c9909 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1072,7 +1072,8 @@ stop_rr_fcf_flogi: /* FLOGI failed, so there is no fabric */ spin_lock_irq(shost->host_lock); - vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP); + vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP | + FC_PT2PT_NO_NVME); spin_unlock_irq(shost->host_lock); /* If private loop, then allow max outstanding els to be @@ -4607,6 +4608,23 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* Added for Vendor specifc support * Just keep retrying for these Rsn / Exp codes */ + if ((vport->fc_flag & FC_PT2PT) && + cmd == ELS_CMD_NVMEPRLI) { + switch (stat.un.b.lsRjtRsnCode) { + case LSRJT_UNABLE_TPC: + case LSRJT_INVALID_CMD: + case LSRJT_LOGICAL_ERR: + case LSRJT_CMD_UNSUPPORTED: + lpfc_printf_vlog(vport, KERN_WARNING, LOG_ELS, + "0168 NVME PRLI LS_RJT " + "reason %x port doesn't " + "support NVME, disabling NVME\n", + stat.un.b.lsRjtRsnCode); + retry = 0; + vport->fc_flag |= FC_PT2PT_NO_NVME; + goto out_retry; + } + } switch (stat.un.b.lsRjtRsnCode) { case LSRJT_UNABLE_TPC: /* The driver has a VALID PLOGI but the rport has -- cgit v1.2.3