From 6d34855d9aa281f72c533ecb827405139d1b0fe9 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 9 Dec 2009 12:31:37 -0800 Subject: serial: 8250_pnp: use wildcard for serial Wacom tablets Wacom claims that the WACF namespace will always be devoted to serial Wacom tablets. Remove the existing entries and add a wildcard to avoid having to update the kernel every time they add a new device. Signed-off-by: Ping Cheng Signed-off-by: Matthew Garrett Tested-by: Ping Cheng Cc: Alan Cox Signed-off-by: Andrew Morton Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/serial/8250_pnp.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index b5496a19d967..24485cc62ff8 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -328,15 +328,7 @@ static const struct pnp_device_id pnp_dev_table[] = { /* U.S. Robotics 56K Voice INT PnP*/ { "USR9190", 0 }, /* Wacom tablets */ - { "WACF004", 0 }, - { "WACF005", 0 }, - { "WACF006", 0 }, - { "WACF007", 0 }, - { "WACF008", 0 }, - { "WACF009", 0 }, - { "WACF00A", 0 }, - { "WACF00B", 0 }, - { "WACF00C", 0 }, + { "WACFXXX", 0 }, /* Compaq touchscreen */ { "FPI2002", 0 }, /* Fujitsu Stylistic touchscreens */ -- cgit v1.2.3 From 4547be7809a3b775ce750ec7f8b5748954741523 Mon Sep 17 00:00:00 2001 From: Stanislav Brabec Date: Wed, 2 Dec 2009 16:20:56 +0100 Subject: serial-core: resume serial hardware with no_console_suspend Perform a tricky suspend/resume even with no_console_suspend. With no_console_suspend, kernel skips serial port suspend/resume and the serial hardware may remain in undefined state after resume. It actually happens on devices that don't have BIOS that handle serial initialization. It makes impossible to use serial console after resume. Devices affected by this problem include: Sharp Zaurus devices Several PXA based ARM embedded boards The patch does: - Save the hardware state - Perform buffer flush in time of its suspend call - Tell the driver that port is suspended - But still accept new data - And keep console hardware in state that allows to send them It allows to capture late console messages without breaking console after resume. This is just a resend of a patch discussed in these threads, as the patch was not yet applied. "Possible suspend/resume regression in .32-rc?" (Nov 1-5, 2009, ARM list, later LKML) "serial-core: resume serial hardware with no_console_suspend" (Sep 15-Oct 18, 2009, LKML & ARM lists) Signed-off-by: Stanislav Brabec Tested-by: Haojian Zhuang Tested-by: Daniel Mack Signed-off-by: Greg Kroah-Hartman --- drivers/serial/serial_core.c | 88 +++++++++++++++++--------------------------- 1 file changed, 33 insertions(+), 55 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 047530b285bb..fa4f170f2e86 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -2006,12 +2006,6 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - if (!console_suspend_enabled && uart_console(uport)) { - /* we're going to avoid suspending serial console */ - mutex_unlock(&port->mutex); - return 0; - } - tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (device_may_wakeup(tty_dev)) { enable_irq_wake(uport->irq); @@ -2019,20 +2013,23 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) mutex_unlock(&port->mutex); return 0; } - uport->suspended = 1; + if (console_suspend_enabled || !uart_console(uport)) + uport->suspended = 1; if (port->flags & ASYNC_INITIALIZED) { const struct uart_ops *ops = uport->ops; int tries; - set_bit(ASYNCB_SUSPENDED, &port->flags); - clear_bit(ASYNCB_INITIALIZED, &port->flags); + if (console_suspend_enabled || !uart_console(uport)) { + set_bit(ASYNCB_SUSPENDED, &port->flags); + clear_bit(ASYNCB_INITIALIZED, &port->flags); - spin_lock_irq(&uport->lock); - ops->stop_tx(uport); - ops->set_mctrl(uport, 0); - ops->stop_rx(uport); - spin_unlock_irq(&uport->lock); + spin_lock_irq(&uport->lock); + ops->stop_tx(uport); + ops->set_mctrl(uport, 0); + ops->stop_rx(uport); + spin_unlock_irq(&uport->lock); + } /* * Wait for the transmitter to empty. @@ -2047,16 +2044,18 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) drv->dev_name, drv->tty_driver->name_base + uport->line); - ops->shutdown(uport); + if (console_suspend_enabled || !uart_console(uport)) + ops->shutdown(uport); } /* * Disable the console device before suspending. */ - if (uart_console(uport)) + if (console_suspend_enabled && uart_console(uport)) console_stop(uport->cons); - uart_change_pm(state, 3); + if (console_suspend_enabled || !uart_console(uport)) + uart_change_pm(state, 3); mutex_unlock(&port->mutex); @@ -2073,29 +2072,6 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - if (!console_suspend_enabled && uart_console(uport)) { - /* no need to resume serial console, it wasn't suspended */ - /* - * First try to use the console cflag setting. - */ - memset(&termios, 0, sizeof(struct ktermios)); - termios.c_cflag = uport->cons->cflag; - /* - * If that's unset, use the tty termios setting. - */ - if (termios.c_cflag == 0) - termios = *state->port.tty->termios; - else { - termios.c_ispeed = termios.c_ospeed = - tty_termios_input_baud_rate(&termios); - termios.c_ispeed = termios.c_ospeed = - tty_termios_baud_rate(&termios); - } - uport->ops->set_termios(uport, &termios, NULL); - mutex_unlock(&port->mutex); - return 0; - } - tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (!uport->suspended && device_may_wakeup(tty_dev)) { disable_irq_wake(uport->irq); @@ -2121,21 +2097,23 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) spin_lock_irq(&uport->lock); ops->set_mctrl(uport, 0); spin_unlock_irq(&uport->lock); - ret = ops->startup(uport); - if (ret == 0) { - uart_change_speed(state, NULL); - spin_lock_irq(&uport->lock); - ops->set_mctrl(uport, uport->mctrl); - ops->start_tx(uport); - spin_unlock_irq(&uport->lock); - set_bit(ASYNCB_INITIALIZED, &port->flags); - } else { - /* - * Failed to resume - maybe hardware went away? - * Clear the "initialized" flag so we won't try - * to call the low level drivers shutdown method. - */ - uart_shutdown(state); + if (console_suspend_enabled || !uart_console(uport)) { + ret = ops->startup(uport); + if (ret == 0) { + uart_change_speed(state, NULL); + spin_lock_irq(&uport->lock); + ops->set_mctrl(uport, uport->mctrl); + ops->start_tx(uport); + spin_unlock_irq(&uport->lock); + set_bit(ASYNCB_INITIALIZED, &port->flags); + } else { + /* + * Failed to resume - maybe hardware went away? + * Clear the "initialized" flag so we won't try + * to call the low level drivers shutdown method. + */ + uart_shutdown(state); + } } clear_bit(ASYNCB_SUSPENDED, &port->flags); -- cgit v1.2.3 From 16ae2a877bf4179737921235e85ceffd7b79354f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Jan 2010 16:26:21 +0000 Subject: serial: Fix crash if the minimum rate of the device is > 9600 baud In that situation if the old rate is invalid and the new rate is invalid and the chip cannot do 9600 baud we report zero, which makes all the drivers explode. Instead force the rate based on min/max Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/serial/serial_core.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index fa4f170f2e86..7f2830709512 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -385,13 +385,20 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, } /* - * As a last resort, if the quotient is zero, - * default to 9600 bps + * As a last resort, if the range cannot be met then clip to + * the nearest chip supported rate. */ - if (!hung_up) - tty_termios_encode_baud_rate(termios, 9600, 9600); + if (!hung_up) { + if (baud <= min) + tty_termios_encode_baud_rate(termios, + min + 1, min + 1); + else + tty_termios_encode_baud_rate(termios, + max - 1, max - 1); + } } - + /* Should never happen */ + WARN_ON(1); return 0; } -- cgit v1.2.3 From 2e2eb509aa7a333fe9931cf306fc7dbc3473f25b Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 9 Dec 2009 12:31:36 -0800 Subject: serial: imx: bit &/| confusion MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since UCR1_UARTEN is defined 1, the port was always treated as enabled. Signed-off-by: Roel Kluin Cc: Alan Cox Acked-by: Oskar Schirmer Cc: Sascha Hauer Cc: Fabian Godehardt Cc: Daniel Glöckner Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 18130f11238e..60d665a17a88 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1088,7 +1088,7 @@ imx_console_get_options(struct imx_port *sport, int *baud, int *parity, int *bits) { - if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) { + if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) { /* ok, the port was enabled */ unsigned int ucr2, ubir,ubmr, uartclk; unsigned int baud_raw; -- cgit v1.2.3 From 18c576f950167ff3ec1e56dcbbec7b87288b3237 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 9 Dec 2009 12:31:31 -0800 Subject: serial: serial_cs: oxsemi quirk breaks resume Quirk is applied on all cards with given manfid (is it that correct?). Unfortunately, that quirk breaks resume on zaurus with billionton bluetooth card inserted: c950ctrl is 0 and outb() faults. I believe it is simply not a multiport card. (info->multi == 1). ... ... confirmed by printks. Signed-off-by: Pavel Machek Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/serial_cs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 0ee7239c5d69..df854401af2d 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -146,7 +146,8 @@ static void quirk_wakeup_oxsemi(struct pcmcia_device *link) { struct serial_info *info = link->priv; - outb(12, info->c950ctrl + 1); + if (info->c950ctrl) + outb(12, info->c950ctrl + 1); } /* request_region? oxsemi branch does no request_region too... */ -- cgit v1.2.3