From ad75b88ac3792ae6a541d9b9fa84e379bd0b29dd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 3 Aug 2011 12:33:20 +0900 Subject: serial: sh-sci: Fix up default regtype probing. Presently the default regtype probing inadvertently bails out due to an inverted error check. This fixes it up, and gets platforms without explicit regtype specifications working again. Reported-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/tty/serial/sh-sci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index d0a56235c50e..522f69d3c8ae 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1889,7 +1889,7 @@ static int __devinit sci_init_single(struct platform_device *dev, if (p->regtype == SCIx_PROBE_REGTYPE) { ret = sci_probe_regmap(p); - if (unlikely(!ret)) + if (unlikely(ret != 0)) return ret; } -- cgit v1.2.3 From 5beabc7fcd99856084e232b37d3280ce353eaf41 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 2 Aug 2011 09:42:54 +0000 Subject: serial: sh-sci: fix DMA build by including dma-mapping.h Include dma-mapping.h to fix build of the sh-sci driver on SH-Mobile ARM (sh73a0) when CONFIG_SERIAL_SH_SCI_DMA=y: drivers/tty/serial/sh-sci.c: In function 'sci_rx_dma_release': drivers/tty/serial/sh-sci.c:1182:3: error: implicit declaration of function 'dma_free_coherent' drivers/tty/serial/sh-sci.c: In function 'work_fn_tx': drivers/tty/serial/sh-sci.c:1333:2: error: implicit declaration of function 'dma_sync_sg_for_device' drivers/tty/serial/sh-sci.c: In function 'sci_request_dma': drivers/tty/serial/sh-sci.c:1498:3: error: implicit declaration of function 'dma_map_sg' drivers/tty/serial/sh-sci.c:1527:3: error: implicit declaration of function 'dma_alloc_coherent' drivers/tty/serial/sh-sci.c:1527:10: warning: assignment makes pointer from integer without a cast make[3]: *** [drivers/tty/serial/sh-sci.o] Error 1 make[2]: *** [drivers/tty/serial] Error 2 make[1]: *** [drivers/tty] Error 2 make: *** [drivers] Error 2 Signed-off-by: Magnus Damm Tested-by: Simon Horman Signed-off-by: Paul Mundt --- drivers/tty/serial/sh-sci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 522f69d3c8ae..38a81ae9b7df 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -47,6 +47,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From 1ba762209491e2496e58baffa3fd65d661f54404 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 3 Aug 2011 03:47:36 +0000 Subject: serial: sh-sci: console Runtime PM support Add Runtime PM context save/restore support to the SCIF driver. Tested on the AP4EVB console. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/tty/serial/sh-sci.c | 68 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 58 insertions(+), 10 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 38a81ae9b7df..ffcaceee0215 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -96,6 +96,12 @@ struct sci_port { #endif struct notifier_block freq_transition; + +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE + unsigned short saved_smr; + unsigned short saved_fcr; + unsigned char saved_brr; +#endif }; /* Function prototypes */ @@ -1634,11 +1640,25 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, return ((freq + 16 * bps) / (32 * bps) - 1); } +static void sci_reset(struct uart_port *port) +{ + unsigned int status; + + do { + status = sci_in(port, SCxSR); + } while (!(status & SCxSR_TEND(port))); + + sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ + + if (port->type != PORT_SCI) + sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); +} + static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { struct sci_port *s = to_sci_port(port); - unsigned int status, baud, smr_val, max_baud; + unsigned int baud, smr_val, max_baud; int t = -1; u16 scfcr = 0; @@ -1658,14 +1678,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_port_enable(s); - do { - status = sci_in(port, SCxSR); - } while (!(status & SCxSR_TEND(port))); - - sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ - - if (port->type != PORT_SCI) - sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST); + sci_reset(port); smr_val = sci_in(port, SCSMR) & 3; @@ -2037,7 +2050,8 @@ static int __devinit serial_console_setup(struct console *co, char *options) if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); - /* TODO: disable clock */ + sci_port_disable(sci_port); + return uart_set_options(port, co, baud, parity, bits, flow); } @@ -2080,6 +2094,36 @@ static int __devinit sci_probe_earlyprintk(struct platform_device *pdev) return 0; } +#define uart_console(port) ((port)->cons->index == (port)->line) + +static int sci_runtime_suspend(struct device *dev) +{ + struct sci_port *sci_port = dev_get_drvdata(dev); + struct uart_port *port = &sci_port->port; + + if (uart_console(port)) { + sci_port->saved_smr = sci_in(port, SCSMR); + sci_port->saved_brr = sci_in(port, SCBRR); + sci_port->saved_fcr = sci_in(port, SCFCR); + } + return 0; +} + +static int sci_runtime_resume(struct device *dev) +{ + struct sci_port *sci_port = dev_get_drvdata(dev); + struct uart_port *port = &sci_port->port; + + if (uart_console(port)) { + sci_reset(port); + sci_out(port, SCSMR, sci_port->saved_smr); + sci_out(port, SCBRR, sci_port->saved_brr); + sci_out(port, SCFCR, sci_port->saved_fcr); + sci_out(port, SCSCR, sci_port->cfg->scscr); + } + return 0; +} + #define SCI_CONSOLE (&serial_console) #else @@ -2089,6 +2133,8 @@ static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev) } #define SCI_CONSOLE NULL +#define sci_runtime_suspend NULL +#define sci_runtime_resume NULL #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ @@ -2204,6 +2250,8 @@ static int sci_resume(struct device *dev) } static const struct dev_pm_ops sci_dev_pm_ops = { + .runtime_suspend = sci_runtime_suspend, + .runtime_resume = sci_runtime_resume, .suspend = sci_suspend, .resume = sci_resume, }; -- cgit v1.2.3 From 4480a688b2beaa82ecac269b6e21bf1a26251bf9 Mon Sep 17 00:00:00 2001 From: Yoshii Takashi Date: Tue, 23 Aug 2011 08:27:18 +0000 Subject: serial: sh-sci: report CTS as active for get_mctrl sh-sci.c sets hardware up and then let the HW do all flow controls. There is no software code, nor needs to get/set real CTS signal. But, when turning CRTSCTS on through termios, uart_set_termios() in serial_core.c checks CTS, and stops TX if it is inactive at the moment. Because sci_get_mctrl() returns a fixed value DTR|RTS|DSR but CTS, the sequence open -> set CRTSCTS -> write hit the case and stop working, no more outputs. This patch makes sci_get_mctrl() report CTS in addition. Signed-off-by: Takashi YOSHII Signed-off-by: Paul Mundt --- drivers/tty/serial/sh-sci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 18e6342af073..161e70010709 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1083,7 +1083,7 @@ static unsigned int sci_get_mctrl(struct uart_port *port) /* This routine is used for getting signals of: DTR, DCD, DSR, RI, and CTS/RTS */ - return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR; + return TIOCM_DTR | TIOCM_RTS | TIOCM_CTS | TIOCM_DSR; } #ifdef CONFIG_SERIAL_SH_SCI_DMA -- cgit v1.2.3 From 83ede96e98f5a7eb3ed07c78cb1dd166581eb864 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Wed, 14 Sep 2011 16:22:06 -0700 Subject: cris: fix a build error in drivers/tty/serial/crisv10.c Fix these errors: drivers/tty/serial/crisv10.c:4453: error: 'if_ser0' undeclared (first use in this function): 2 errors in 2 logs drivers/tty/serial/crisv10.c:4453: error: (Each undeclared identifier is reported only once: 2 errors in 2 logs drivers/tty/serial/crisv10.c:4453: error: for each function it appears in.): 2 errors in 2 logs "if_ser0" is a typo, it should be "if_serial_0". Signed-off-by: WANG Cong Cc: Mikael Starvik Cc: Jesper Nilsson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/tty/serial/crisv10.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 225123b37f19..58be715913cd 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -4450,7 +4450,7 @@ static int __init rs_init(void) #if defined(CONFIG_ETRAX_RS485) #if defined(CONFIG_ETRAX_RS485_ON_PA) - if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit, + if (cris_io_interface_allocate_pins(if_serial_0, 'a', rs485_pa_bit, rs485_pa_bit)) { printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " "RS485 pin\n"); @@ -4459,7 +4459,7 @@ static int __init rs_init(void) } #endif #if defined(CONFIG_ETRAX_RS485_ON_PORT_G) - if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit, + if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit, rs485_port_g_bit)) { printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " "RS485 pin\n"); -- cgit v1.2.3 From b7867f1bfcb76c75d98d35f576fcd9d7759a96fe Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 3 Aug 2011 13:37:24 +0100 Subject: SERIAL: Lantiq: Set timeout in uart_port Without this patch apps using readline hang. Signed-off-by: Thomas Langer Signed-off-by: John Crispin Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2687/ Signed-off-by: Alan Cox Signed-off-by: Ralf Baechle --- drivers/tty/serial/lantiq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index 58cf279ed879..bc95f52cad8b 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -478,8 +478,10 @@ lqasc_set_termios(struct uart_port *port, spin_unlock_irqrestore(<q_asc_lock, flags); /* Don't rewrite B0 */ - if (tty_termios_baud_rate(new)) + if (tty_termios_baud_rate(new)) tty_termios_encode_baud_rate(new, baud, baud); + + uart_update_timeout(port, cflag, baud); } static const char* -- cgit v1.2.3