From c3492dbfa1050debf23a5b5cd2bc7514c5b37896 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 18 Nov 2014 11:27:11 +0200 Subject: USB: xhci: don't start a halted endpoint before its new dequeue is set A halted endpoint ring must first be reset, then move the ring dequeue pointer past the problematic TRB. If we start the ring too early after reset, but before moving the dequeue pointer we will end up executing the same problematic TRB again. As we always issue a set transfer dequeue command after a reset endpoint command we can skip starting endpoint rings at reset endpoint command completion. Without this fix we end up trying to handle the same faulty TD for contol endpoints. causing timeout, and failing testusb ctrl_out write tests. Fixes: e9df17e (USB: xhci: Correct assumptions about number of rings per endpoint.) Cc: #v2.6.35 Tested-by: Felipe Balbi Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index bc6fcbc16f61..fbd0342af286 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1067,9 +1067,8 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id, false); xhci_ring_cmd_db(xhci); } else { - /* Clear our internal halted state and restart the ring(s) */ + /* Clear our internal halted state */ xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED; - ring_doorbell_for_active_rings(xhci, slot_id, ep_index); } } -- cgit v1.2.3 From 9b41ebd3cf0f68d8cad779d3eeba336f78262e43 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Tue, 18 Nov 2014 11:27:13 +0200 Subject: Revert "xhci: clear root port wake on bits if controller isn't wake-up capable" commit ff8cbf250b44 ("xhci: clear root port wake on bits if controller isn't") can cause device detection error if runtime PM is enabled, and S3 wake is disabled. Revert it. https://bugzilla.kernel.org/show_bug.cgi?id=85701 This commit got into stable and should be reverted from there as well. Cc: stable # v3.2+ Signed-off-by: Lu Baolu Reported-by: Dmitry Nezhevenko [Mathias Nyman: reword commit message] Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 696160d48ae8..388cfd83b6b6 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -22,7 +22,6 @@ #include -#include #include #include "xhci.h" @@ -1149,9 +1148,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) * including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME * is enabled, so also enable remote wake here. */ - if (hcd->self.root_hub->do_remote_wakeup - && device_may_wakeup(hcd->self.controller)) { - + if (hcd->self.root_hub->do_remote_wakeup) { if (t1 & PORT_CONNECT) { t2 |= PORT_WKOC_E | PORT_WKDISC_E; t2 &= ~PORT_WKCONN_E; -- cgit v1.2.3 From 8e71a322fdb127814bcba423a512914ca5bc6cf5 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 18 Nov 2014 11:27:12 +0200 Subject: USB: xhci: Reset a halted endpoint immediately when we encounter a stall. If a device is halted and reuturns a STALL, then the halted endpoint needs to be cleared both on the host and device side. The host side halt is cleared by issueing a xhci reset endpoint command. The device side is cleared with a ClearFeature(ENDPOINT_HALT) request, which should be issued by the device driver if a URB reruen -EPIPE. Previously we cleared the host side halt after the device side was cleared. To make sure the host side halt is cleared in time we want to issue the reset endpoint command immedialtely when a STALL status is encountered. Otherwise we end up not following the specs and not returning -EPIPE several times in a row when trying to transfer data to a halted endpoint. Fixes: bcef3fd (USB: xhci: Handle errors that cause endpoint halts.) Cc: # v2.6.33+ Tested-by: Felipe Balbi Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 40 +++++++-------------------- drivers/usb/host/xhci.c | 65 ++++++++++---------------------------------- 2 files changed, 25 insertions(+), 80 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fbd0342af286..06433aec81d7 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1822,22 +1822,13 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, ep->stopped_td = td; return 0; } else { - if (trb_comp_code == COMP_STALL) { - /* The transfer is completed from the driver's - * perspective, but we need to issue a set dequeue - * command for this stalled endpoint to move the dequeue - * pointer past the TD. We can't do that here because - * the halt condition must be cleared first. Let the - * USB class driver clear the stall later. - */ - ep->stopped_td = td; - ep->stopped_stream = ep_ring->stream_id; - } else if (xhci_requires_manual_halt_cleanup(xhci, - ep_ctx, trb_comp_code)) { - /* Other types of errors halt the endpoint, but the - * class driver doesn't call usb_reset_endpoint() unless - * the error is -EPIPE. Clear the halted status in the - * xHCI hardware manually. + if (trb_comp_code == COMP_STALL || + xhci_requires_manual_halt_cleanup(xhci, ep_ctx, + trb_comp_code)) { + /* Issue a reset endpoint command to clear the host side + * halt, followed by a set dequeue command to move the + * dequeue pointer past the TD. + * The class driver clears the device side halt later. */ xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index, ep_ring->stream_id, @@ -1957,9 +1948,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, else td->urb->actual_length = 0; - xhci_cleanup_halted_endpoint(xhci, - slot_id, ep_index, 0, td, event_trb); - return finish_td(xhci, td, event_trb, event, ep, status, true); + return finish_td(xhci, td, event_trb, event, ep, status, false); } /* * Did we transfer any data, despite the errors that might have @@ -2518,17 +2507,8 @@ cleanup: if (ret) { urb = td->urb; urb_priv = urb->hcpriv; - /* Leave the TD around for the reset endpoint function - * to use(but only if it's not a control endpoint, - * since we already queued the Set TR dequeue pointer - * command for stalled control endpoints). - */ - if (usb_endpoint_xfer_control(&urb->ep->desc) || - (trb_comp_code != COMP_STALL && - trb_comp_code != COMP_BABBLE)) - xhci_urb_free_priv(xhci, urb_priv); - else - kfree(urb_priv); + + xhci_urb_free_priv(xhci, urb_priv); usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); if ((urb->actual_length != urb->transfer_buffer_length && diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2a5d45b4cb15..4d0d2407b71c 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2912,68 +2912,33 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, } } -/* Deal with stalled endpoints. The core should have sent the control message - * to clear the halt condition. However, we need to make the xHCI hardware - * reset its sequence number, since a device will expect a sequence number of - * zero after the halt condition is cleared. +/* Called when clearing halted device. The core should have sent the control + * message to clear the device halt condition. The host side of the halt should + * already be cleared with a reset endpoint command issued when the STALL tx + * event was received. + * * Context: in_interrupt */ + void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) { struct xhci_hcd *xhci; - struct usb_device *udev; - unsigned int ep_index; - unsigned long flags; - int ret; - struct xhci_virt_ep *virt_ep; - struct xhci_command *command; xhci = hcd_to_xhci(hcd); - udev = (struct usb_device *) ep->hcpriv; - /* Called with a root hub endpoint (or an endpoint that wasn't added - * with xhci_add_endpoint() - */ - if (!ep->hcpriv) - return; - ep_index = xhci_get_endpoint_index(&ep->desc); - virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index]; - if (!virt_ep->stopped_td) { - xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, - "Endpoint 0x%x not halted, refusing to reset.", - ep->desc.bEndpointAddress); - return; - } - if (usb_endpoint_xfer_control(&ep->desc)) { - xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, - "Control endpoint stall already handled."); - return; - } - - command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); - if (!command) - return; - xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, - "Queueing reset endpoint command"); - spin_lock_irqsave(&xhci->lock, flags); - ret = xhci_queue_reset_ep(xhci, command, udev->slot_id, ep_index); /* - * Can't change the ring dequeue pointer until it's transitioned to the - * stopped state, which is only upon a successful reset endpoint - * command. Better hope that last command worked! + * We might need to implement the config ep cmd in xhci 4.8.1 note: + * The Reset Endpoint Command may only be issued to endpoints in the + * Halted state. If software wishes reset the Data Toggle or Sequence + * Number of an endpoint that isn't in the Halted state, then software + * may issue a Configure Endpoint Command with the Drop and Add bits set + * for the target endpoint. that is in the Stopped state. */ - if (!ret) { - xhci_cleanup_stalled_ring(xhci, udev, ep_index); - kfree(virt_ep->stopped_td); - xhci_ring_cmd_db(xhci); - } - virt_ep->stopped_td = NULL; - virt_ep->stopped_stream = 0; - spin_unlock_irqrestore(&xhci->lock, flags); - if (ret) - xhci_warn(xhci, "FIXME allocate a new ring segment\n"); + /* For now just print debug to follow the situation */ + xhci_dbg(xhci, "Endpoint 0x%x ep reset callback called\n", + ep->desc.bEndpointAddress); } static int xhci_check_streams_endpoint(struct xhci_hcd *xhci, -- cgit v1.2.3 From a1377e5397ab321e21b793ec8cd2b6f12bd3c718 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Tue, 18 Nov 2014 11:27:14 +0200 Subject: usb: xhci: rework root port wake bits if controller isn't allowed to wakeup When system is being suspended, if host device is not allowed to do wakeup, xhci_suspend() needs to clear all root port wake on bits. Otherwise, some platforms may generate spurious wakeup, even if PCI PME# is disabled. The initial commit ff8cbf250b44 ("xhci: clear root port wake on bits"), which also got into stable, turned out to not work correctly and had to be reverted, and is now rewritten. Cc: stable # v3.2+ Signed-off-by: Lu Baolu Suggested-by: Alan Stern Acked-by: Alan Stern [Mathias Nyman: reword commit message] Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 2 +- drivers/usb/host/xhci-plat.c | 10 +++++++++- drivers/usb/host/xhci.c | 42 +++++++++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci.h | 2 +- 4 files changed, 52 insertions(+), 4 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 9a69b1f1b300..142b601f9563 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -281,7 +281,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) if (xhci->quirks & XHCI_COMP_MODE_QUIRK) pdev->no_d3cold = true; - return xhci_suspend(xhci); + return xhci_suspend(xhci, do_wakeup); } static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 3d78b0cd674b..646300cbe5f7 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -204,7 +204,15 @@ static int xhci_plat_suspend(struct device *dev) struct usb_hcd *hcd = dev_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); - return xhci_suspend(xhci); + /* + * xhci_suspend() needs `do_wakeup` to know whether host is allowed + * to do wakeup during suspend. Since xhci_plat_suspend is currently + * only designed for system suspend, device_may_wakeup() is enough + * to dertermine whether host is allowed to do wakeup. Need to + * reconsider this when xhci_plat_suspend enlarges its scope, e.g., + * also applies to runtime suspend. + */ + return xhci_suspend(xhci, device_may_wakeup(dev)); } static int xhci_plat_resume(struct device *dev) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 4d0d2407b71c..033b46c470bd 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -35,6 +35,8 @@ #define DRIVER_AUTHOR "Sarah Sharp" #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" +#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E) + /* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */ static int link_quirk; module_param(link_quirk, int, S_IRUGO | S_IWUSR); @@ -851,13 +853,47 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) xhci_set_cmd_ring_deq(xhci); } +static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci) +{ + int port_index; + __le32 __iomem **port_array; + unsigned long flags; + u32 t1, t2; + + spin_lock_irqsave(&xhci->lock, flags); + + /* disble usb3 ports Wake bits*/ + port_index = xhci->num_usb3_ports; + port_array = xhci->usb3_ports; + while (port_index--) { + t1 = readl(port_array[port_index]); + t1 = xhci_port_state_to_neutral(t1); + t2 = t1 & ~PORT_WAKE_BITS; + if (t1 != t2) + writel(t2, port_array[port_index]); + } + + /* disble usb2 ports Wake bits*/ + port_index = xhci->num_usb2_ports; + port_array = xhci->usb2_ports; + while (port_index--) { + t1 = readl(port_array[port_index]); + t1 = xhci_port_state_to_neutral(t1); + t2 = t1 & ~PORT_WAKE_BITS; + if (t1 != t2) + writel(t2, port_array[port_index]); + } + + spin_unlock_irqrestore(&xhci->lock, flags); +} + /* * Stop HC (not bus-specific) * * This is called when the machine transition into S3/S4 mode. * */ -int xhci_suspend(struct xhci_hcd *xhci) +int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) { int rc = 0; unsigned int delay = XHCI_MAX_HALT_USEC; @@ -868,6 +904,10 @@ int xhci_suspend(struct xhci_hcd *xhci) xhci->shared_hcd->state != HC_STATE_SUSPENDED) return -EINVAL; + /* Clear root port wake on bits if wakeup not allowed. */ + if (!do_wakeup) + xhci_disable_port_wake_on_bits(xhci); + /* Don't poll the roothubs on bus suspend. */ xhci_dbg(xhci, "%s: stopping port polling.\n", __func__); clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index df76d642e719..d745715a1e2f 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1746,7 +1746,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks); void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *)); #ifdef CONFIG_PM -int xhci_suspend(struct xhci_hcd *xhci); +int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup); int xhci_resume(struct xhci_hcd *xhci, bool hibernated); #else #define xhci_suspend NULL -- cgit v1.2.3