From 15460de7f3d9cf0846af1cfdb4a3995d2f270ce7 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 17 Mar 2013 20:23:23 +0200 Subject: usb: phy: twl4030-usb: don't switch the phy on/off needlessly With runtime_pm in place there is no longer need to turn the phy on/off in OTG layer on cable connect/disconnect, OMAP glue does this through otg.set_suspend() callback after it's called through omap_musb_mailbox() on VBUS/ID interrupt. Not doing this will save power when cable is connected but no gadget driver is loaded. This will also have side effect of automatic USB charging no longer working without twl4030_charger driver, because a regulator needed for charging will no longer be enabled, so be sure to enable charger driver if charging is needed. Signed-off-by: Grazvydas Ignotas Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-twl4030-usb.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers/usb/phy') diff --git a/drivers/usb/phy/phy-twl4030-usb.c b/drivers/usb/phy/phy-twl4030-usb.c index 7ff67ce373dc..f4ec53a58103 100644 --- a/drivers/usb/phy/phy-twl4030-usb.c +++ b/drivers/usb/phy/phy-twl4030-usb.c @@ -498,12 +498,6 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) * USB_LINK_VBUS state. musb_hdrc won't care until it * starts to handle softconnect right. */ - if (status == OMAP_MUSB_VBUS_OFF || - status == OMAP_MUSB_ID_FLOAT) - twl4030_phy_suspend(twl, 0); - else - twl4030_phy_resume(twl); - omap_musb_mailbox(twl->linkstat); } sysfs_notify(&twl->dev->kobj, NULL, "vbus"); -- cgit v1.2.3