From bc4b1f486fe69b86769e07c8edce472327a8462b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 15 Feb 2015 11:57:53 +0700 Subject: Revert "USB: serial: make bulk_out_size a lower limit" This reverts commit 5083fd7bdfe6760577235a724cf6dccae13652c2. A bulk-out size smaller than the end-point size is indeed valid. The offending commit broke the usb-debug driver for EHCI debug devices, which use 8-byte buffers. Fixes: 5083fd7bdfe6 ("USB: serial: make bulk_out_size a lower limit") Reported-by: "Li, Elvin" Cc: stable # v3.15 Signed-off-by: Johan Hovold --- drivers/usb/serial/usb-serial.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 475723c006f9..19842370a07f 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -940,8 +940,9 @@ static int usb_serial_probe(struct usb_interface *interface, port = serial->port[i]; if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL)) goto probe_error; - buffer_size = max_t(int, serial->type->bulk_out_size, - usb_endpoint_maxp(endpoint)); + buffer_size = serial->type->bulk_out_size; + if (!buffer_size) + buffer_size = usb_endpoint_maxp(endpoint); port->bulk_out_size = buffer_size; port->bulk_out_endpointAddress = endpoint->bEndpointAddress; -- cgit v1.2.3 From f6950344d3cf4a1e231b5828b50c4ac168db3886 Mon Sep 17 00:00:00 2001 From: Mark Glover Date: Fri, 13 Feb 2015 09:04:39 +0000 Subject: USB: ftdi_sio: add PIDs for Actisense USB devices These product identifiers (PID) all deal with marine NMEA format data used on motor boats and yachts. We supply the programmed devices to Chetco, for use inside their equipment. The PIDs are a direct copy of our Windows device drivers (FTDI drivers with altered PIDs). Signed-off-by: Mark Glover Cc: stable [johan: edit commit message slightly ] Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 17 +++++++++++++++++ drivers/usb/serial/ftdi_sio_ids.h | 20 ++++++++++++++++++++ 2 files changed, 37 insertions(+) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1ebb351b9e9a..651dc1ba46c3 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -978,6 +978,23 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) }, /* GE Healthcare devices */ { USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) }, + /* Active Research (Actisense) devices */ + { USB_DEVICE(FTDI_VID, ACTISENSE_NDC_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_NMEA2000_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ETHERNET_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_WIFI_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index e52409c9be99..4d3da89cd8dd 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1438,3 +1438,23 @@ */ #define GE_HEALTHCARE_VID 0x1901 #define GE_HEALTHCARE_NEMO_TRACKER_PID 0x0015 + +/* + * Active Research (Actisense) devices + */ +#define ACTISENSE_NDC_PID 0xD9A8 /* NDC USB Serial Adapter */ +#define ACTISENSE_USG_PID 0xD9A9 /* USG USB Serial Adapter */ +#define ACTISENSE_NGT_PID 0xD9AA /* NGT NMEA2000 Interface */ +#define ACTISENSE_NGW_PID 0xD9AB /* NGW NMEA2000 Gateway */ +#define ACTISENSE_D9AC_PID 0xD9AC /* Actisense Reserved */ +#define ACTISENSE_D9AD_PID 0xD9AD /* Actisense Reserved */ +#define ACTISENSE_D9AE_PID 0xD9AE /* Actisense Reserved */ +#define ACTISENSE_D9AF_PID 0xD9AF /* Actisense Reserved */ +#define CHETCO_SEAGAUGE_PID 0xA548 /* SeaGauge USB Adapter */ +#define CHETCO_SEASWITCH_PID 0xA549 /* SeaSwitch USB Adapter */ +#define CHETCO_SEASMART_NMEA2000_PID 0xA54A /* SeaSmart NMEA2000 Gateway */ +#define CHETCO_SEASMART_ETHERNET_PID 0xA54B /* SeaSmart Ethernet Gateway */ +#define CHETCO_SEASMART_WIFI_PID 0xA5AC /* SeaSmart Wifi Gateway */ +#define CHETCO_SEASMART_DISPLAY_PID 0xA5AD /* SeaSmart NMEA2000 Display */ +#define CHETCO_SEASMART_LITE_PID 0xA5AE /* SeaSmart Lite USB Adapter */ +#define CHETCO_SEASMART_ANALOG_PID 0xA5AF /* SeaSmart Analog Adapter */ -- cgit v1.2.3 From 5ee0089b1f7057d8f783db37b2a8116cd114f6e5 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 16 Feb 2015 13:17:33 +0700 Subject: USB: console: add dummy __module_get Add call to __module_get when initialising the fake tty in usb_console_setup to match the module_put in release_one_tty. Note that the tty-driver (i.e. usb-serial core) must be compiled-in to enable the usb console so the __module_get is essentially a noop as driver->owner will be null. Reported-by: Ben Hutchings Signed-off-by: Johan Hovold --- drivers/usb/serial/console.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 29fa1c3d0089..3806e7014199 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -14,6 +14,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include +#include #include #include #include @@ -144,6 +145,7 @@ static int usb_console_setup(struct console *co, char *options) init_ldsem(&tty->ldisc_sem); INIT_LIST_HEAD(&tty->tty_files); kref_get(&tty->driver->kref); + __module_get(tty->driver->owner); tty->ops = &usb_console_fake_tty_ops; if (tty_init_termios(tty)) { retval = -ENOMEM; -- cgit v1.2.3 From 07fdfc5e9f1c966be8722e8fa927e5ea140df5ce Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 18 Feb 2015 10:34:50 +0700 Subject: USB: serial: fix potential use-after-free after failed probe Fix return value in probe error path, which could end up returning success (0) on errors. This could in turn lead to use-after-free or double free (e.g. in port_remove) when the port device is removed. Fixes: c706ebdfc895 ("USB: usb-serial: call port_probe and port_remove at the right times") Cc: stable # v2.6.31 Signed-off-by: Johan Hovold Acked-by: Greg Kroah-Hartman --- drivers/usb/serial/bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 9374bd2aba20..5d8d86666b90 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -75,7 +75,7 @@ static int usb_serial_device_probe(struct device *dev) retval = device_create_file(dev, &dev_attr_port_number); if (retval) { if (driver->port_remove) - retval = driver->port_remove(port); + driver->port_remove(port); goto exit_with_autopm; } -- cgit v1.2.3 From ca4383a3947a83286bc9b9c598a1f55e867871d7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 18 Feb 2015 10:34:51 +0700 Subject: USB: serial: fix tty-device error handling at probe Add missing error handling when registering the tty device at port probe. This avoids trying to remove an uninitialised character device when the port device is removed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Takashi Iwai Cc: stable # v2.6.12 Signed-off-by: Johan Hovold Acked-by: Greg Kroah-Hartman --- drivers/usb/serial/bus.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 5d8d86666b90..6f91eb9ae81a 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -51,6 +51,7 @@ static int usb_serial_device_probe(struct device *dev) { struct usb_serial_driver *driver; struct usb_serial_port *port; + struct device *tty_dev; int retval = 0; int minor; @@ -80,7 +81,15 @@ static int usb_serial_device_probe(struct device *dev) } minor = port->minor; - tty_register_device(usb_serial_tty_driver, minor, dev); + tty_dev = tty_register_device(usb_serial_tty_driver, minor, dev); + if (IS_ERR(tty_dev)) { + retval = PTR_ERR(tty_dev); + device_remove_file(dev, &dev_attr_port_number); + if (driver->port_remove) + driver->port_remove(port); + goto exit_with_autopm; + } + dev_info(&port->serial->dev->dev, "%s converter now attached to ttyUSB%d\n", driver->description, minor); -- cgit v1.2.3 From 2deb96b5d4bb20a33bfaf80e30f38f3433653054 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 18 Feb 2015 10:34:52 +0700 Subject: USB: serial: fix port attribute-creation race Fix attribute-creation race with userspace by using the port device groups field to create the port attributes. Also use %u when printing the port number, which is unsigned, even though we do not currently support more than 128 ports per device. Reported-by: Takashi Iwai Signed-off-by: Johan Hovold Acked-by: Greg Kroah-Hartman --- drivers/usb/serial/bus.c | 19 ------------------- drivers/usb/serial/usb-serial.c | 16 ++++++++++++++++ 2 files changed, 16 insertions(+), 19 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 6f91eb9ae81a..b53a28692226 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -38,15 +38,6 @@ static int usb_serial_device_match(struct device *dev, return 0; } -static ssize_t port_number_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct usb_serial_port *port = to_usb_serial_port(dev); - - return sprintf(buf, "%d\n", port->port_number); -} -static DEVICE_ATTR_RO(port_number); - static int usb_serial_device_probe(struct device *dev) { struct usb_serial_driver *driver; @@ -73,18 +64,10 @@ static int usb_serial_device_probe(struct device *dev) goto exit_with_autopm; } - retval = device_create_file(dev, &dev_attr_port_number); - if (retval) { - if (driver->port_remove) - driver->port_remove(port); - goto exit_with_autopm; - } - minor = port->minor; tty_dev = tty_register_device(usb_serial_tty_driver, minor, dev); if (IS_ERR(tty_dev)) { retval = PTR_ERR(tty_dev); - device_remove_file(dev, &dev_attr_port_number); if (driver->port_remove) driver->port_remove(port); goto exit_with_autopm; @@ -123,8 +106,6 @@ static int usb_serial_device_remove(struct device *dev) minor = port->minor; tty_unregister_device(usb_serial_tty_driver, minor); - device_remove_file(&port->dev, &dev_attr_port_number); - driver = port->serial->type; if (driver->port_remove) retval = driver->port_remove(port); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 19842370a07f..529066bbc7e8 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -687,6 +687,21 @@ static void serial_port_dtr_rts(struct tty_port *port, int on) drv->dtr_rts(p, on); } +static ssize_t port_number_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + + return sprintf(buf, "%u\n", port->port_number); +} +static DEVICE_ATTR_RO(port_number); + +static struct attribute *usb_serial_port_attrs[] = { + &dev_attr_port_number.attr, + NULL +}; +ATTRIBUTE_GROUPS(usb_serial_port); + static const struct tty_port_operations serial_port_ops = { .carrier_raised = serial_port_carrier_raised, .dtr_rts = serial_port_dtr_rts, @@ -902,6 +917,7 @@ static int usb_serial_probe(struct usb_interface *interface, port->dev.driver = NULL; port->dev.bus = &usb_serial_bus_type; port->dev.release = &usb_serial_port_release; + port->dev.groups = usb_serial_port_groups; device_initialize(&port->dev); } -- cgit v1.2.3 From d6f7f41274b548435ab5de1041a492fc4a714196 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 18 Feb 2015 11:04:46 +0700 Subject: USB: serial: clean up bus probe error handling Clean up bus probe error handling by separating success and error paths. Signed-off-by: Johan Hovold --- drivers/usb/serial/bus.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index b53a28692226..8936a83c96cd 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -47,39 +47,42 @@ static int usb_serial_device_probe(struct device *dev) int minor; port = to_usb_serial_port(dev); - if (!port) { - retval = -ENODEV; - goto exit; - } + if (!port) + return -ENODEV; /* make sure suspend/resume doesn't race against port_probe */ retval = usb_autopm_get_interface(port->serial->interface); if (retval) - goto exit; + return retval; driver = port->serial->type; if (driver->port_probe) { retval = driver->port_probe(port); if (retval) - goto exit_with_autopm; + goto err_autopm_put; } minor = port->minor; tty_dev = tty_register_device(usb_serial_tty_driver, minor, dev); if (IS_ERR(tty_dev)) { retval = PTR_ERR(tty_dev); - if (driver->port_remove) - driver->port_remove(port); - goto exit_with_autopm; + goto err_port_remove; } + usb_autopm_put_interface(port->serial->interface); + dev_info(&port->serial->dev->dev, "%s converter now attached to ttyUSB%d\n", driver->description, minor); -exit_with_autopm: + return 0; + +err_port_remove: + if (driver->port_remove) + driver->port_remove(port); +err_autopm_put: usb_autopm_put_interface(port->serial->interface); -exit: + return retval; } -- cgit v1.2.3 From db81de767e375743ebb0ad2bcad3326962c2b67e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 18 Feb 2015 11:51:07 +0700 Subject: USB: mxuport: fix null deref when used as a console Fix null-pointer dereference at probe when the device is used as a console, in which case the tty argument to open will be NULL. Fixes: ee467a1f2066 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver") Cc: stable # v3.14 Signed-off-by: Johan Hovold Acked-by: Greg Kroah-Hartman --- drivers/usb/serial/mxuport.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/mxuport.c b/drivers/usb/serial/mxuport.c index ab1d690274ae..460a40669967 100644 --- a/drivers/usb/serial/mxuport.c +++ b/drivers/usb/serial/mxuport.c @@ -1284,7 +1284,8 @@ static int mxuport_open(struct tty_struct *tty, struct usb_serial_port *port) } /* Initial port termios */ - mxuport_set_termios(tty, port, NULL); + if (tty) + mxuport_set_termios(tty, port, NULL); /* * TODO: use RQ_VENDOR_GET_MSR, once we know what it -- cgit v1.2.3 From 52772a7fd3d354ec1b88d85c83e98cbdcfb02787 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 26 Feb 2015 16:50:24 +0100 Subject: USB: pl2303: disable break on shutdown Currently an enabled break state is not disabled on final close nor on re-open and has to be disabled manually. Fix this by disabling break on port shutdown. Reported-by: Jari Ruusu Tested-by: Jari Ruusu Signed-off-by: Johan Hovold --- drivers/usb/serial/pl2303.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 0f872e6b2c87..829604d11f3f 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -132,6 +132,7 @@ MODULE_DEVICE_TABLE(usb, id_table); #define UART_OVERRUN_ERROR 0x40 #define UART_CTS 0x80 +static void pl2303_set_break(struct usb_serial_port *port, bool enable); enum pl2303_type { TYPE_01, /* Type 0 and 1 (difference unknown) */ @@ -615,6 +616,7 @@ static void pl2303_close(struct usb_serial_port *port) { usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); + pl2303_set_break(port, false); } static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -741,17 +743,16 @@ static int pl2303_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } -static void pl2303_break_ctl(struct tty_struct *tty, int break_state) +static void pl2303_set_break(struct usb_serial_port *port, bool enable) { - struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; u16 state; int result; - if (break_state == 0) - state = BREAK_OFF; - else + if (enable) state = BREAK_ON; + else + state = BREAK_OFF; dev_dbg(&port->dev, "%s - turning break %s\n", __func__, state == BREAK_OFF ? "off" : "on"); @@ -763,6 +764,13 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state) dev_err(&port->dev, "error sending break = %d\n", result); } +static void pl2303_break_ctl(struct tty_struct *tty, int state) +{ + struct usb_serial_port *port = tty->driver_data; + + pl2303_set_break(port, state); +} + static void pl2303_update_line_status(struct usb_serial_port *port, unsigned char *data, unsigned int actual_length) -- cgit v1.2.3 From 675af70856d7cc026be8b6ea7a8b9db10b8b38a1 Mon Sep 17 00:00:00 2001 From: Michiel vd Garde Date: Fri, 27 Feb 2015 02:08:29 +0100 Subject: USB: serial: cp210x: Adding Seletek device id's These device ID's are not associated with the cp210x module currently, but should be. This patch allows the devices to operate upon connecting them to the usb bus as intended. Signed-off-by: Michiel van de Garde Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index f40c856ff758..84ce2d74894c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -147,6 +147,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */ { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */ { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */ + { USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */ + { USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */ { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */ -- cgit v1.2.3 From aa91def41a7bb1fd65492934ce6bea19202b6080 Mon Sep 17 00:00:00 2001 From: Nicolas PLANEL Date: Sun, 1 Mar 2015 13:47:22 -0500 Subject: USB: ch341: set tty baud speed according to tty struct The ch341_set_baudrate() function initialize the device baud speed according to the value on priv->baud_rate. By default the ch341_open() set it to a hardcoded value (DEFAULT_BAUD_RATE 9600). Unfortunately, the tty_struct is not initialized with the same default value. (usually 56700) This means that the tty_struct and the device baud rate generator are not synchronized after opening the port. Fixup is done by calling ch341_set_termios() if tty exist. Remove unnecessary variable priv->baud_rate setup as it's already done by ch341_port_probe(). Remove unnecessary call to ch341_set_{handshake,baudrate}() in ch341_open() as there already called in ch341_configure() and ch341_set_termios() Signed-off-by: Nicolas PLANEL Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 2d72aa3564a3..ede4f5fcfadd 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -84,6 +84,10 @@ struct ch341_private { u8 line_status; /* active status of modem control inputs */ }; +static void ch341_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios); + static int ch341_control_out(struct usb_device *dev, u8 request, u16 value, u16 index) { @@ -309,19 +313,12 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) struct ch341_private *priv = usb_get_serial_port_data(port); int r; - priv->baud_rate = DEFAULT_BAUD_RATE; - r = ch341_configure(serial->dev, priv); if (r) goto out; - r = ch341_set_handshake(serial->dev, priv->line_control); - if (r) - goto out; - - r = ch341_set_baudrate(serial->dev, priv); - if (r) - goto out; + if (tty) + ch341_set_termios(tty, port, NULL); dev_dbg(&port->dev, "%s - submitting interrupt urb\n", __func__); r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); -- cgit v1.2.3 From c7d373c3f0da2b2b78c4b1ce5ae41485b3ef848c Mon Sep 17 00:00:00 2001 From: Max Mansfield Date: Mon, 2 Mar 2015 18:38:02 -0700 Subject: usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards This patch integrates Cyber Cortex AV boards with the existing ftdi_jtag_quirk in order to use serial port 0 with JTAG which is required by the manufacturers' software. Steps: 2 [ftdi_sio_ids.h] 1. Defined the device PID [ftdi_sio.c] 2. Added a macro declaration to the ids array, in order to enable the jtag quirk for the device. Signed-off-by: Max Mansfield Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 3 +++ 2 files changed, 5 insertions(+) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 651dc1ba46c3..3086dec0ef53 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -799,6 +799,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) }, + { USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID), diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 4d3da89cd8dd..56b1b55c4751 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -38,6 +38,9 @@ #define FTDI_LUMEL_PD12_PID 0x6002 +/* Cyber Cortex AV by Fabulous Silicon (http://fabuloussilicon.com) */ +#define CYBER_CORTEX_AV_PID 0x8698 + /* * Marvell OpenRD Base, Client * http://www.open-rd.org -- cgit v1.2.3